5995-12-300-5973

143005973 5950-14-300-5973 5950143005973 143005973 https//www.nsnlookup.com /fsg-59/fsc-5995/de 5995-12-300-5973
Radio Frequency Cable Assembly 5995123005973 5995-12-300-5973 5995123005973 123005973 is a definite

59735950143005973143005973 https//www.nsnlookup.com /fsg- https//www.nsnlookup.com /fsg-59/fsc-5995/de 5995-12-300-5973
Radio Frequency Cable Assembly 5995123005973 //www.nsnlookup.com /fsg-47/fsc-4720/uk 4720-99-125
143005973 5950-14-300-59735950143005973143005973 https//www.nsnlookup.com /fsg-59/fsc-5995/de 5995-12-300-5973

5910-01-298-1983 5910012981983 012981983 is a capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. it may be a single unit, or consist of two or more fixed units which cannot be separated.

6760-00-298-1983 6760002981983 002981983

5310-14-298-1983 5310142981983 142981983 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.