Premium Information is available for this item - Upgrade for $1 a day
5990-01-213-6319
Control Transformer Synchro
5990012136319 012136319 1802884-151 VCT15-6D2-96 2563150-5013
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers. View more Control Transformer Synchro
May 2023
5
Marketplace 5990-01-213-6319
Request a Quotation from participating marketplace vendors
Related Documents 5990-01-213-6319 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5990-01-213-6319 RQST NE Updated Every Day 5990-01-213-6319 RQST
Updated Every Day 5990-01-213-6319 RQST NE Related Documents 5990-01-213-6319 1+ Documents ( More...
Restrictions 5990-01-213-6319
5990-01-213-6319 is a Control Transformer Synchro that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5990-01-213-6319
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5990-01-213-6319
- US Navy (N9BN)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
Approved Sources 5990-01-213-6319
- Part Number
- Manufacturer
- Status
- 1802884-151
- Manufacturer
- 03956 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- VCT15-6D2-96
- 10112 - General Dynamics Motion Control Llc (Active)
- Secondary Buy
- Secondary Buy
- 2563150-5013
- 96774 - Honeywell International Inc. (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5990-01-213-6319
- Characteristic
- Specifications
- FIIG
- Specifications
- A07800
- Electrical Error Angular Range In Minutes [AJVL]
- -10.0 To 10.0
- Actuator Friction Torque At Plus 25 Deg Celsius [AJVT]
- 0.05 Inch-Ounces Nominal
- Alignment Hole Bolt Circle Diameter [CTCW]
- 1.0970 Inches Minimum And 1.1030 Inches Maximum
- Alignment Hole Depth [CRSY]
- 0.1250 Inches Minimum
- Alignment Hole Quantity [AJVW]
- 4
- Body Material [AAFZ]
- Steel, Corrosion Resisting
- Body Size [AJSL]
- 15
- Body Style [AAQL]
- Standard Round B
- Flange Diameter [ABKK]
- 1.4320 Inches Minimum And 1.4370 Inches Maximum
- Flange Thickness [ABKU]
- 0.0880 Inches Minimum And 0.0980 Inches Maximum
- Frequency In Hertz [AJSS]
- 60.0 Nominal
- Maximum Fundamental Null Voltage In Millivolts Per Volt [AJVG]
- 50.00 Output
- Maximum Temp Rise [AHCG]
- 10.0 Deg Celsius
- Maximum Total Null Voltage Output In Millivolts Per Volt [AJVH]
- 100.00
- Mounting Surface To Terminal End Distance [AJWX]
- 2.5180 Inches Maximum
- Shaft End Play Determining Weight [CWYF]
- 16.0 Ounces
- Shaft End Play [AJWH]
- 0.0005 Inches Minimum And 0.0015 Inches Maximum
- Shaft Diameter [ABWV]
- 0.1870 Inches Minimum And 0.1872 Inches Maximum Single Shaft
- Shaft Maximum Radial Play [AJWG]
- 0.0006 Inches
- Shaft Nominal Thread Size [CWBH]
- 0.190 Inches Single Shaft
- Shaft Length [ABXF]
- 0.5450 Inches Minimum And 0.5650 Inches Maximum Single Shaft
- Shaft Radial Play Determining Weight [CWXK]
- 8.0 Ounces
- Shaft Radial Play Test Point [AJWE]
- 0.125 Inches Nominal
- Shaft Thread Class [AKAN]
- 2A Single Shaft
- Shaft Thread Direction [AKAF]
- Right-Hand Single Shaft
- Shaft Thread Length [CQWQ]
- 0.2000 Inches Nominal Single Shaft
- Shaft Thread Series Designator [AJYY]
- Unf Single Shaft
- Shaft Type [CRSJ]
- Spline W/Threads Single Shaft
- Shoulder Diameter [AAVH]
- 1.3070 Inches Minimum And 1.3120 Inches Maximum
- Shoulder Length [AJWR]
- 0.1070 Inches Minimum And 0.1270 Inches Maximum
- Overall Length [ABHP]
- 3.0830 Inches Maximum
- Pilot Diameter [AAVL]
- 0.8745 Inches Minimum And 0.8750 Inches Maximum
- Pilot Length [AJWQ]
- 0.0350 Inches Minimum And 0.0450 Inches Maximum
- Phase Shift Angle In Deg [AJVF]
- 9.000 Input To Output Nominal
- Transformation Ratio [CSJY]
- 0.735 Rotor To Stator Nominal
- Undercut Width [ABPC]
- 0.0730 Inches Minimum And 0.0830 Inches Maximum
- Zrs Impedance Magnitude In Ohms [AJTL]
- 1475.00 Nominal
- Zso Impedance Angle In Deg [AJTK]
- 76.00 Minimum And 84.00 Maximum
- Zso Impedance Magnitude In Ohms [AJTJ]
- 6250.00 Nominal
- Zrs Impedance Angle In Deg [AJTM]
- 12.00 Minimum And 20.00 Maximum
- Spline Tooth Diametral Pitch [AJXA]
- 120 Single Shaft
- Spline Tooth Quantity [AJVM]
- 21 Single Shaft
- Stator Input Electrical Power Rating [AJSQ]
- 210.0 Milliwatts Maximum
- Stator Input Voltage Rating In Volts [AJSN]
- 90.0 Nominal
- Stator Input Current Rating [AJSP]
- 13.0 Milliamperes Maximum
- Terminal Location [CQTM]
- Rear
- Terminal Type And Quantity [TTQY]
- 5 Screw
DLA Procurement Analysis 5990-01-213-6319
Management Data 5990-01-213-6319
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5990-01-213-6319
Freight Information 5990-01-213-6319
5990-01-213-6319 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061700. A Sub NMFC of Z. It has a NMFC Description of ELEC APPLIANCES/INSTRUMENTS NOI. 5990-01-213-6319 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34580 which rates the freight between FCL and LCL. 5990-01-213-6319 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5990-01-213-6319 is not classified as a special type of cargo when transported by water. 5990-01-213-6319 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5990-01-213-6319
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5990-01-213-6319 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: