Premium Information is available for this item - Upgrade for $1 a day
5990-01-025-7464
Electrical Resolver
5990010257464 010257464 976061-1 20RB1
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers. View more Electrical Resolver
May 2023
7
Marketplace 5990-01-025-7464
Request a Quotation from participating marketplace vendors
Related Documents 5990-01-025-7464 1+ Documents (More...)
(Identification) 1/2 NSN 5990-01-025-7464 (Identification) 2/2 - - 1.
NE FedMall Updated Every Day 5990-01-025-7464 RQST NE Updated Every Day 5990-01-025-7464 RQST Updated
Restrictions 5990-01-025-7464
5990-01-025-7464 is a Electrical Resolver that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5990-01-025-7464
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5990-01-025-7464
- National Security Agency (DGX1)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- DTX1
- Supplementary Receivers:
- TX
Approved Sources 5990-01-025-7464
- Part Number
- Manufacturer
- Status
- 976061-1
- Manufacturer
- 82577 - Raytheon Company (Active)
- Primary Buy
- Primary Buy
- 20RB1
- 08719 - Ducommun Labarge Technologies, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5990-01-025-7464
- Characteristic
- Specifications
- FIIG
- Specifications
- A07800
- Body Size [AJSL]
- 20
- Stator Input Voltage Rating In Volts [AJSN]
- 20.0 Maximum
- Stator Input Current Rating [AJSP]
- 30.0 Milliamperes Maximum
- Frequency In Hertz [AJSS]
- 400.0 Nominal
- Zro Impedance Magnitude In Ohms [AJTG]
- 500.00 Maximum
- Zso Impedance Magnitude In Ohms [AJTJ]
- 500000.00 Minimum
- Zso Impedance Angle In Deg [AJTK]
- 35.00 Nominal
- Transformation Ratio [CSJY]
- 1.000 Rotor To Stator Nominal
- Transformation Ratio Equality In Percent [AJTW]
- 0.1 Maximum
- Compensation Method [AJTX]
- Winding Compensated
- Phase Shift Angle In Deg [AJVF]
- 0.100 Input To Output Nominal
- Maximum Temp Rise [AHCG]
- 10.0 Deg Celsius
- Maximum Fundamental Null Voltage In Millivolts Per Volt [AJVG]
- 20.00 Input
- Maximum Total Null Voltage Output In Millivolts Per Volt [AJVH]
- 25.00
- Interaxis Error Angular Range In Minutes [AJVJ]
- -3.0 To 3.0
- Output Voltage Functional Error Range In Percent [AJVK]
- -0.1 To 0.1
- Electrical Error Angular Range In Minutes [AJVL]
- -3.0 To 3.0
- Actuator Friction Torque At Minus 55 Deg Celsius [AJVS]
- 30.0 Centimeter-Grams Nominal
- Actuator Friction Torque At Plus 25 Deg Celsius [AJVT]
- 15.0 Centimeter-Grams Nominal
- Body Style [AAQL]
- Standard Round A
- Pilot Diameter [AAVL]
- 1.8740 Inches Minimum And
- Pilot Diameter [AAVL]
- 1.8750 Inches Maximum
- Overall Length [ABHP]
- 1.6530 Inches Maximum
- Flange Diameter [ABKK]
- 1.9950 Inches Minimum And
- Flange Diameter [ABKK]
- 2.0050 Inches Maximum
- Flange Thickness [ABKU]
- 0.0880 Inches Minimum And
- Flange Thickness [ABKU]
- 0.0980 Inches Maximum
- Undercut Diameter [ABPA]
- 1.8750 Inches Maximum
- Undercut Width [ABPC]
- 0.0730 Inches Minimum
- Pilot Length [AJWQ]
- 0.0380 Inches Minimum And
- Pilot Length [AJWQ]
- 0.0480 Inches Maximum
- Mounting Surface To Terminal End Distance [AJWX]
- 1.1650 Inches Maximum
- Shaft Type [CRSJ]
- Round Single Shaft
- Shaft Diameter [ABWV]
- 0.0895 Inches Minimum And
- Shaft Diameter [ABWV]
- 0.0900 Inches Maximum Single Shaft
- Shaft Length [ABXF]
- 0.4100 Inches Minimum And
- Shaft Length [ABXF]
- 0.4400 Inches Maximum Single Shaft
- Terminal Type And Quantity [TTQY]
- 12 Wire Lead
- Terminal Location [CQTM]
- Side
- Body Material [AAFZ]
- Steel, Corrosion Resisting
- Shaft Maximum Radial Play [AJWG]
- 0.0008 Inches
- Shaft Radial Play Test Point [AJWE]
- 0.250 Inches Nominal
- Shaft Radial Play Determining Weight [CWXK]
- 4.0 Ounces
- Shaft End Play [AJWH]
- 0.0005 Inches Minimum And
- Shaft End Play [AJWH]
- 0.0015 Inches Maximum
- Shaft End Play Determining Weight [CWYF]
- 8.0 Ounces
- Shaft Maximum Runout [AJXB]
- 0.0010 Inches
- Schematic Diagram Designator [AEBZ]
- 2 Rotor, 2 Stator, 2 Compensator, 2 Resistor
- Terminal Designator And Schematic Position [AJWP]
- Connection R1 Position H And
- Terminal Designator And Schematic Position [AJWP]
- Connection R2 Position G And
- Terminal Designator And Schematic Position [AJWP]
- Connection R3 Position E And
- Terminal Designator And Schematic Position [AJWP]
- Connection R4 Position J And
- Terminal Designator And Schematic Position [AJWP]
- Connection S1 Position L And
- Terminal Designator And Schematic Position [AJWP]
- Connection S2 Position M And
- Terminal Designator And Schematic Position [AJWP]
- Connection S3 Position K And
- Terminal Designator And Schematic Position [AJWP]
- Connection S4 Position N And
- Terminal Designator And Schematic Position [AJWP]
- Connection C1 Position D And
- Terminal Designator And Schematic Position [AJWP]
- Connection C2 Position C And
- Terminal Designator And Schematic Position [AJWP]
- Connection C3 Position A And
- Terminal Designator And Schematic Position [AJWP]
- Connection C4 Position B
- Fragility Factor [AFJN]
- Moderately Rugged
DLA Procurement Analysis 5990-01-025-7464
Management Data 5990-01-025-7464
Similar Supply Items to 5990-01-025-7464
Freight Information 5990-01-025-7464
5990-01-025-7464 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 5990-01-025-7464 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 5990-01-025-7464 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 5990-01-025-7464 is not classified as a special type of cargo when transported by water. 5990-01-025-7464 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5990-01-025-7464
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5990-01-025-7464 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: