5990-00-933-5313

Mar 1966 5990-00-945-6708 Electrical Resolver 900141-116RNCC: 3 | RNVC: 2 | DAC: 1 11 Mar 1966 5990-00-933-5313

6665-25-151-2169 6665251512169 251512169 is a case which is specifically designed to hold the components of a sampling and analyzing kit, cbr agents.

5310-01-151-2169 5310011512169 011512169 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5905-12-151-2169 5905121512169 121512169 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. see also attenuator, fixed and resistor, fixed, composition. excludes carbon composition type resistors.

3020-99-151-2169 3020991512169 991512169 RUOTA DRITTA CILIND