5985-15-121-8547

include emergency features for trailer application. https//www.nsnlookup.com /fsg-59/fsc-5985/it 5985-15-121-8547
Regenerating Heater 5985151218547 151218547 5985-15-121-8547 5985151218547 151218547 REGENERATING

1398-15-238-4394 1398152384394 152384394 FORATRICE, IMPIANTO

4540-15-009-7915 4540150097915 150097915 is an electrical device in the form of a resistor consisting of a resistance wire, an insulating material, and a sheath. it is designed to transform electrical current into heat while immersed in a liquid to be heated or in contact with materials to be melted. it may include an automatic control to regulate the amount of heat generated.

5975-01-511-4075 5975015114075 015114075 is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. it must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. it may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. see also mounting base, electrical equipment; cabinet, electrical equipment; and case (2) (as modified). excludes main distributing frame, telephone and intermediate distributing frame, telephone.

5306-12-384-1746 5306123841746 123841746 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.