Premium Information is available for this item - Upgrade for $1 a day
5977-00-985-3603
Electrical Contact Brush
5977009853603 009853603 5110-153 SK3864 REV A SK3864
An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: CONTACT, ELECTRICAL; and CONTACT ASSEMBLY, ELECTRICAL. View more Electrical Contact Brush
May 2023
11
Marketplace 5977-00-985-3603
Request a Quotation from participating marketplace vendors
Related Documents 5977-00-985-3603 3+ Documents (More...)
Electrical Contact Brush SK3864 REV ARNCC: 3 | RNVC: 2 | DAC: 5SK3864RNCC: 5 | RNVC: 9 | DAC: 4
/fsg-59/fsc-5977/us
Restrictions 5977-00-985-3603
5977-00-985-3603 is a Electrical Contact Brush that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains Silver.
Import and Export 5977-00-985-3603
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5977-00-985-3603
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5977-00-985-3603
- Part Number
- Manufacturer
- Status
- 5110-153
- Manufacturer
- 06102 - Airflo Instrument Company, The (Active)
- Primary Buy
- Primary Buy
- SK3864 REV A
- 68256 - Carbone Of America Corporation (Active)
- Primary Buy
- Primary Buy
- SK3864
- 68256 - Carbone Of America Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5977-00-985-3603
- Characteristic
- Specifications
- FIIG
- Specifications
- A01500
- Body Style [AAQL]
- Rectangular Commutator
- Brush Shunt Length [AHXP]
- 1.250 Inches Minimum Single Shunt And 1.350 Inches Maximum Single Shunt
- Contact Face Style [CQGT]
- Concave
- Head Length [AASV]
- 0.900 Inches Nominal
- Material Document And Classification [MDCL]
- Superior Carbon Products Grade Sg45 Mfr Ref Single Material Response
- Material [MATT]
- Silver Graphite
- Length [ABRY]
- 0.420 Inches Minimum And 0.450 Inches Maximum
- Pressure Spring Type And Quantity [CRWQ]
- 1 Cylindrical
- Shunt Insulation Provision And Quantity [CRBG]
- 1 Insulated
- Shunt Position Designator [AABU]
- 5
- Top Style [BTHR]
- Cylindrical Head
- Width [ABGL]
- 0.182 Inches Minimum And 0.184 Inches Maximum
- Spring Free Length [AGEK]
- 1.250 Inches Minimum And 1.350 Inches Maximum
- Style Designator [STYL]
- One Piece
- Terminal Diameter [AEBT]
- 0.250 Inches Minimum And 0.260 Inches Maximum
- Terminal Type And Quantity [TTQY]
- 1 Round Cap
- Thickness [ABNM]
- 0.182 Inches Minimum And 0.184 Inches Maximum
Weapon Systems (WSDC) 5977-00-985-3603
DLA Procurement Analysis 5977-00-985-3603
Management Data 5977-00-985-3603
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5977-00-985-3603
Freight Information 5977-00-985-3603
5977-00-985-3603 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 040580. A Sub NMFC of X. It has a NMFC Description of CARBON BRUSHES GENERATOR/MOTOR. 5977-00-985-3603 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 20480 which rates the freight between FCL and LCL. 5977-00-985-3603 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5977-00-985-3603 is not classified as a special type of cargo when transported by water. 5977-00-985-3603 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5977-00-985-3603
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- --
- MIL-DTL-117, Type III, Class B, Style 2, Heavy Duty, Waterproof, Transparent Bag
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5977-00-985-3603 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: