5977-00-980-7806

Documents 5905-01-255-3738 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5977/us 5977-00-980-7806
Electrical Holder 5977009807806 009807806 Request a Quotation from participating marketplace vendors
Request Subscribe to View Vendor Details... 107-9090 Documents 5977-00-980-7806 2+ Documents (More..

5905-00-107-9090 5905001079090 001079090 is a resistor whose overall ohmic value is fixed; in addition, it has one or more movable terminals which are designed to be set and fixed prior to use, to include any desired value of resistance within the range of the complete resistor. the opposition to the flow of current is an inherent property of the material used and is manifest in the heat dissipated in the item itself.

2510-21-107-9090 2510211079090 211079090 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

5970-15-107-9090 5970151079090 151079090 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

7330-98-107-9090 7330981079090 981079090 is an item consisting of one or more blades mounted flat in a frame with an aperture beneath the blade(s). the slicing operation is preformed by pushing the fruit or vegetable against the blade(s).