Premium Information is available for this item - Upgrade for $1 a day
5977-00-808-7961
Electrical Contact Brush
5977008087961 008087961 A21844-6
An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: CONTACT, ELECTRICAL; and CONTACT ASSEMBLY, ELECTRICAL. View more Electrical Contact Brush
May 2023
4
Marketplace 5977-00-808-7961
Request a Quotation from participating marketplace vendors
Related Documents 5977-00-808-7961 3+ Documents (More...)
/fsg-59/fsc-5977/us
BUY NE FedMall Updated Every Day 5977-00-808-7961 RQST NE Updated Every Day 5977-00-808-7961 RQST
) https//www.nsnlookup.com /fsg-59/fsc-5977/us 5977-00-808-7961 Electrical Contact Brush 5977008087961
Electrical Contact Brush 5977008087961 Documents 5977-00-808-7961 3+ Documents ( More... https/
Electrical Contact Brush 5977008087961 day Upgrade your Account Upgrade 5977-00-808-7961Electrical
Contact Brush5977008087961 008087961 A21844 5977-00-808-7961 3+ Documents ( More... https/ https//www.nsnlookup.com
Restrictions 5977-00-808-7961
5977-00-808-7961 is a Electrical Contact Brush that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5977-00-808-7961
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5977-00-808-7961
- US Army (A918)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- A178
- US Air Force (FXGG)
- Effective Date:
- 1 May 2006
Approved Sources 5977-00-808-7961
- Part Number
- Manufacturer
- Status
- A21844-6
- Manufacturer
- 38151 - Marathon Electric, Llc (Obsolete)
- Primary Buy
- Primary Buy
Datasheet 5977-00-808-7961
- Characteristic
- Specifications
- FIIG
- Specifications
- A01500
- Style Designator [STYL]
- One Piece
- Material [MATT]
- Electrographitic
- Material Document And Classification [MDCL]
- Union Carbide Corp,Carbon Products Div,Grade Sa-35 Mfr Ref Single Material Response
- Body Style [AAQL]
- Rectangular Commutator
- Width [ABGL]
- 1.000 Inches Nominal
- Thickness [ABNM]
- 0.250 Inches Nominal
- Length [ABRY]
- 1.000 Inches Nominal
- Contact Face Style [CQGT]
- Flat
- Bevel Angle [CQPY]
- 30.0 Degrees Nominal
- Top Style [BTHR]
- Beveled Front With Right Shoulder
- Angle [CRMK]
- 40.0 Degrees Nominal
- Shunt Insulation Provision And Quantity [CRBG]
- 1 Insulated
- Shunt Position Designator [AABU]
- 10
- Brush Shunt Length [AHXP]
- 3.000 Inches Nominal Single Shunt
- Terminal Type And Quantity [TTQY]
- 1 Straight W/Slot
- Terminal Slot Width [AHXR]
- 0.281 Inches Nominal
DLA Procurement Analysis 5977-00-808-7961
Management Data 5977-00-808-7961
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5977-00-808-7961
Freight Information 5977-00-808-7961
5977-00-808-7961 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062010. A Sub NMFC of Z. It has a NMFC Description of FITTINGS CONDUIT NOI. 5977-00-808-7961 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34496 which rates the freight between FCL and LCL. 5977-00-808-7961 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5977-00-808-7961 is not classified as a special type of cargo when transported by water. 5977-00-808-7961 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5977-00-808-7961
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type III, Class B, Style 2, Heavy Duty, Waterproof, Transparent Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5977-00-808-7961 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: