Premium Information is available for this item - Upgrade for $1 a day
5977-00-574-1046
Electrical Contact Brush
5977005741046 005741046 8691945 30300-1173 10912456
An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: CONTACT, ELECTRICAL; and CONTACT ASSEMBLY, ELECTRICAL. View more Electrical Contact Brush
May 2023
21
Marketplace 5977-00-574-1046
Request a Quotation from participating marketplace vendors
Related Documents 5977-00-574-1046 2+ Documents (More...)
Restrictions 5977-00-574-1046
5977-00-574-1046 is a Electrical Contact Brush that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5977-00-574-1046
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5977-00-574-1046
- National Security Agency (DGX1)
- Effective Date:
- 1 May 2006
- Former MOE Rule:
- DCX1
- Supplementary Receivers:
- CX
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
- Turkey (ZW01)
- Effective Date:
- 1 Oct 2009
Approved Sources 5977-00-574-1046
- Part Number
- Manufacturer
- Status
- 8691945
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 30300-1173
- 31435 - Lucas Aerospace Power Equipment (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 10912456
- 19207 - U S Army Tank Automotive Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5977-00-574-1046
- Characteristic
- Specifications
- FIIG
- Specifications
- A01500
- Angle [CRMK]
- 30.0 Degrees Nominal
- Body Style [AAQL]
- Rectangular Commutator
- Brush Shunt Length [AHXP]
- 1.124 Inches Minimum And 1.250 Inches Maximum All Shunts
- Clip Type [CQYQ]
- Nema Hammer Type Channel A
- Contact Face Style [CQGT]
- Concave
- Material [MATT]
- Carbon
- Length [ABRY]
- 1.312 Inches Nominal
- Shunt Insulation Provision And Quantity [CRBG]
- 2 Uninsulated
- Special Features [FEAT]
- Front Edge Of Clip Turned Up 0.250 In
- Top Style [BTHR]
- Beveled Front
- Width [ABGL]
- 1.057 Inches Minimum And 1.062 Inches Maximum
- Style Designator [STYL]
- Paired
- Terminal Hole Diameter [AHXQ]
- 0.188 Inches Nominal
- Terminal Type And Quantity [TTQY]
- 1 Bent W/Hole
- Thickness [ABNM]
- 0.395 Inches Minimum And 0.400 Inches Maximum
DLA Procurement Analysis 5977-00-574-1046
Management Data 5977-00-574-1046
NATO Stock Numbers Related to 5977-00-574-1046
Freight Information 5977-00-574-1046
5977-00-574-1046 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062010. A Sub NMFC of Z. It has a NMFC Description of FITTINGS CONDUIT NOI. 5977-00-574-1046 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34496 which rates the freight between FCL and LCL. 5977-00-574-1046 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5977-00-574-1046 is not classified as a special type of cargo when transported by water. 5977-00-574-1046 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5977-00-574-1046 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: