What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 96 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 96 of 176

5975-01-075-0575
Electrical Box

010750575
4B69131-116A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-079-2962
Electrical Conduit Coupling Nut

010792962
12278962: RNCC: 3 | RNVC: 2

1 Jul 1979

5975-01-079-9068
Junction Box

010799068
Z147-212A-96: RNCC: 3 | RNVC: 2
619081-3: RNCC: 5 | RNVC: 1
619707-3: RNCC: 5 | RNVC: 9
Z147-212A: RNCC: 5 | RNVC: 9
Z147-212A-96: RNCC: 5 | RNVC: 9

16 Jul 1979

5975-01-082-6669
Electronic Junction Rack

010826669
HS4778-110: RNCC: 1 | RNVC: 2
CTJ-3D-10-4021: RNCC: 3 | RNVC: 2
953904-1: RNCC: 5 | RNVC: 2
953904-1: RNCC: 5 | RNVC: 2
HS4778-110: RNCC: 5 | RNVC: 9
953904-1: RNCC: 5 | RNVC: 9
CTJ-3B-10: RNCC: 5 | RNVC: 9
CTJ-3D-10: RNCC: 5 | RNVC: 9
XM61955-9: RNCC: 5 | RNVC: 9

7 Sep 1979

5975-01-082-7629
Junction Box

010827629
A606CH: RNCC: 3 | RNVC: 2
AB-664JH: RNCC: 3 | RNVC: 2
E-606CH: RNCC: 5 | RNVC: 9
A606CH: RNCC: C | RNVC: 1

10 Sep 1979

5975-01-084-0987
Electrical Wall Plate

010840987
WLRS-1: RNCC: 3 | RNVC: 2
FSK-WR-1: RNCC: 5 | RNVC: 2

9 Oct 1979

5975-01-088-5998
Electrical Conduit Elbow

010885998
10359757: RNCC: 3 | RNVC: 2

16 Jan 1980

5975-01-088-0484
Electrical Components Tie Down Strap

010880484
53064-3: RNCC: 3 | RNVC: 2

4 Jan 1980

5975-01-090-1062
Electronic Junction Rack

010901062
M81714/16-2: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
591621-3: RNCC: 5 | RNVC: 1
421501-043: RNCC: 5 | RNVC: 1
TJT703003: RNCC: 5 | RNVC: 2
MRTBL-3: RNCC: 5 | RNVC: 9
TMH-101033-3: RNCC: 5 | RNVC: 9

13 Feb 1980

5975-01-091-9080
Electrical Cable Nipple

010919080
12273164-410: RNCC: 1 | RNVC: 2
202E346-51: RNCC: 3 | RNVC: 2
313E457-9: RNCC: 5 | RNVC: 2
313E457-9: RNCC: 5 | RNVC: 9
313E457-9: RNCC: 5 | RNVC: 9

15 Mar 1980

5975-01-093-0341
Electronic Junction Rack

010930341
M81714/5-6: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
421-501-03-7: RNCC: 5 | RNVC: 1
538120-6: RNCC: 5 | RNVC: 1
591613-7: RNCC: 5 | RNVC: 1
421501-037: RNCC: 5 | RNVC: 1
3602-025-1106: RNCC: 5 | RNVC: 1
TJT701007: RNCC: 5 | RNVC: 2
MRTB-7: RNCC: 5 | RNVC: 9
101023-7: RNCC: 5 | RNVC: 9

9 Apr 1980

5975-01-094-4698
Electrical Cable Nipple

010944698
12273147-120: RNCC: 1 | RNVC: 2
770-020S602: RNCC: 3 | RNVC: 2
202F211-51: RNCC: 5 | RNVC: 2
313F322-9: RNCC: 5 | RNVC: 2
10652587-1: RNCC: 5 | RNVC: 9
202F211-51: RNCC: 5 | RNVC: 9
313F322-9: RNCC: 5 | RNVC: 9
313F322-9: RNCC: 5 | RNVC: 9
13238510-1: RNCC: 5 | RNVC: 9
202F211-51-0: RNCC: 5 | RNVC: 9

10 May 1980

5975-01-095-3382
Electronic Junction Rack

010953382
M81714/5-3: RNCC: 2 | RNVC: 2
3602-025-1103: RNCC: 5 | RNVC: 1
AS81714: RNCC: 5 | RNVC: 1
421501-034: RNCC: 5 | RNVC: 1
591613-4: RNCC: 5 | RNVC: 1
TJT701004: RNCC: 5 | RNVC: 2
MRTB-4: RNCC: 5 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 9
101023-4: RNCC: 5 | RNVC: 9
MIL-T-81714: RNCC: 5 | RNVC: 9

29 May 1980

5975-01-098-6307
Electronic Junction Rack

010986307
M81714/5-5: RNCC: 3 | RNVC: 2
M81714/5-5: RNCC: 3 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 1
TJT701006: RNCC: 5 | RNVC: 2
M81714/5-5: RNCC: 5 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 9
MIL-T-81714: RNCC: 5 | RNVC: 9

6 Aug 1980

5975-01-099-0982
Conduit Outlet

010990982
JBDX-75L: RNCC: 3 | RNVC: 2

13 Aug 1980

5975-01-099-1040
Interior Cable Rack

010991040
0020040630: RNCC: 3 | RNVC: 2
2004-6: RNCC: 3 | RNVC: 9
9002-232: RNCC: 5 | RNVC: 9

13 Aug 1980

5975-01-101-4160
Electrical Components Tie Down Strap

011014160
12282776: RNCC: 3 | RNVC: 2
TYZ28M: RNCC: 5 | RNVC: 1
RT1400-Z: RNCC: 5 | RNVC: 1
PLT4S-C76: RNCC: 5 | RNVC: 1
PLT4S-C76: RNCC: 5 | RNVC: 2
PLT4S-M76: RNCC: 5 | RNVC: 9
TYZ28M: RNCC: 5 | RNVC: 9
PLT4S-76: RNCC: 5 | RNVC: 9
TYZ28M: RNCC: C | RNVC: 1

29 Sep 1980

5975-01-107-0379
Cable Hanger

011070379
5166026: RNCC: 3 | RNVC: 2

30 Jan 1981

5975-01-108-9000
Electrical Tie Down Mounting Base

011089000
TC342: RNCC: 3 | RNVC: 2
582R688H03: RNCC: 7 | RNVC: 2
582R688H03: RNCC: 7 | RNVC: 9

7 Mar 1981

5975-01-110-7673
Underground Cable Rack Hook

011107673
C203-1132: RNCC: 3 | RNVC: 2
C203-1132: RNCC: 5 | RNVC: 9
ADU00004S002: RNCC: 5 | RNVC: 9
DU4S2: RNCC: 5 | RNVC: 9
J5132AP(T): RNCC: 5 | RNVC: 9

5 Apr 1981

5975-01-111-4773
Ground Strap Spring

011114773
3365616-1: RNCC: 3 | RNVC: 2
3365616-1: RNCC: 3 | RNVC: 2
3365616-1: RNCC: 5 | RNVC: 2
5975PL0802148: RNCC: 6 | RNVC: 9

17 Apr 1981

5975-01-112-6608
Rigid Metal Conduit Assembly

011126608
4B69142-133A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-108-5211
Electrical Cable Nipple

011085211
8338561-2: RNCC: 3 | RNVC: 2
10087271: RNCC: 6 | RNVC: 9

1 Mar 1981

5975-01-113-1688
Rigid Metal Conduit Assembly

011131688
251600: RNCC: 3 | RNVC: 2
4B69142-105A: RNCC: 3 | RNVC: 2
4B69142-105A: RNCC: 5 | RNVC: 2

17 May 1981

5975-01-115-3876
Cable Hanger Support Bracket

011153876
371008: RNCC: 3 | RNVC: 2
371008: RNCC: 5 | RNVC: 9

4 Jul 1981

5975-01-117-4267
Stuffing Tube

011174267
M19622/1-002: RNCC: 3 | RNVC: 2
MIL-S-19622: RNCC: 4 | RNVC: 1
617089-24: RNCC: 5 | RNVC: 1
M19622/1-002: RNCC: 5 | RNVC: 1
5193747: RNCC: D | RNVC: 9

14 Aug 1981

5975-01-118-7877
Junction Box Assembly

011187877
70550-02058-042: RNCC: 3 | RNVC: 2

11 Sep 1981

5975-01-124-5053
Electrical Conduit Coupling

011245053
8764985-5: RNCC: 3 | RNVC: 2

6 Jan 1982

5975-01-130-2544
Rigid Metal Conduit

011302544
65610-02050-102: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-121-6701
Cable Marker Sleeve

011216701
SS7074-412: RNCC: 3 | RNVC: 2

7 Nov 1981

5975-01-123-4209
Electrical-Electronic Equipment Chassis

011234209
65011-006: RNCC: 3 | RNVC: 2

11 Dec 1981

5975-01-142-2681
Relay Box Assembly

011422681
70550-02152-041: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-149-2006
Blank Panel

011492006
74A802613-1003: RNCC: 3 | RNVC: 2
74A802613-1001: RNCC: E | RNVC: 8

16 Mar 1983

5975-01-147-7879
Blank Panel

011477879
74A802614-1006: RNCC: 3 | RNVC: 2
10154465: RNCC: 6 | RNVC: 9
74A802614-1006: RNCC: C | RNVC: 1

23 Feb 1983

5975-01-144-8023
Electrical Tie Down Mounting Base

011448023
12272341: RNCC: 1 | RNVC: 2
ABMM-A: RNCC: 3 | RNVC: 2
150-0786-020: RNCC: 3 | RNVC: 2
12H4782: RNCC: 5 | RNVC: 2
GP830AN1: RNCC: 5 | RNVC: 2
5L.3892.001.25: RNCC: 5 | RNVC: 2
5L.3892.001.25: RNCC: 5 | RNVC: 2
GP830AN1: RNCC: 5 | RNVC: 9
12303133: RNCC: 5 | RNVC: 9

30 Dec 1982

5975-01-158-4635
Junction Box

011584635
2249450: RNCC: 3 | RNVC: 2
2AN858: RNCC: 5 | RNVC: 2
2249450: RNCC: 5 | RNVC: 9
2AN858: RNCC: 5 | RNVC: 9
45B007: RNCC: 5 | RNVC: 9

23 Jul 1983

5975-01-176-5619
Junction Box

011765619
J-606W: RNCC: 3 | RNVC: 2

13 Apr 1984

5975-01-176-6874
Electrical Box Connector

011766874
91701226N: RNCC: 3 | RNVC: 2
91701226N: RNCC: 3 | RNVC: 9
91701226N: RNCC: 5 | RNVC: 2

15 Apr 1984

5975-01-176-6875
Electrical Box Connector

011766875
91701227N: RNCC: 3 | RNVC: 9
91701227N: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-175-2810
Cable Strain Relief Bushing

011752810
1464: RNCC: 3 | RNVC: 2
SR-24-1: RNCC: 5 | RNVC: 2

29 Mar 1984

5975-01-181-9068
Electrical Tie Down Mounting Base

011819068
12279482: RNCC: 3 | RNVC: 2

17 Jun 1984

5975-01-182-7484
Electrical Cable Protector

011827484
387-3320: RNCC: 3 | RNVC: 2
387-3320: RNCC: 3 | RNVC: 9
387-3320: RNCC: 5 | RNVC: 2
387-3320: RNCC: 5 | RNVC: 9
387-3320: RNCC: D | RNVC: 9

27 Jun 1984

5975-01-184-5832
Conduit Outlet

011845832
LB100-M: RNCC: 3 | RNVC: 2
LB100-M: RNCC: 5 | RNVC: 9

20 Jul 1984

5975-01-189-4659
Cable Hanger

011894659
12337487: RNCC: 3 | RNVC: 2

15 Sep 1984

5975-01-193-4772
Electrical Tie Down Mounting Base

011934772
HS4271-3S10: RNCC: 1 | RNVC: 2
TM3S10: RNCC: 3 | RNVC: 2
10273507: RNCC: 3 | RNVC: 2
HS4271-3S10: RNCC: 5 | RNVC: 9

4 Nov 1984

5975-01-160-8064
Junction Box

011608064
10500832: RNCC: 3 | RNVC: 2

27 Aug 1983

5975-01-164-4447
Electrical-Electronic Equipment Chassis

011644447
441-1079-01: RNCC: 3 | RNVC: 2

17 Oct 1983

5975-01-166-1786
Electrical Box Connector

011661786
SHC-1020: RNCC: 3 | RNVC: 2
SCH-1014: RNCC: 5 | RNVC: 9
SHC-1014: RNCC: 5 | RNVC: 9
SHC-1020: RNCC: 5 | RNVC: 9
7681-56032-001: RNCC: 5 | RNVC: 9
7681-56032-001: RNCC: C | RNVC: 1

8 Nov 1983

5975-01-166-6538
Electrical Conduit Tee

011666538
21103: RNCC: 3 | RNVC: 2

16 Nov 1983

5975-01-169-1412
Stuffing Tube

011691412
F-47025: RNCC: 3 | RNVC: 2

4 Jan 1984

5975-01-169-3580
Electrical Equipment Mounting Base

011693580
16F4655-9: RNCC: 3 | RNVC: 2

6 Jan 1984

5975-01-195-6610
Electrical Conduit Elbow

011956610
12311080-17: RNCC: 3 | RNVC: 2

1 Dec 1984

5975-01-197-7673
Electrical Grounding Plate

011977673
48794-B14: RNCC: 3 | RNVC: 2
48794B14: RNCC: C | RNVC: 1

27 Dec 1984

5975-01-198-8794
Electrical Grounding Plate

011988794
12275248: RNCC: 3 | RNVC: 2

15 Jan 1985

5975-01-199-3184
Electrical Conduit Bushing

011993184
536R559H01: RNCC: 3 | RNVC: 2

20 Jan 1985

5975-01-203-2080
Electrical Nonmetallic Conduit Assembly

012032080
251613: RNCC: 3 | RNVC: 2

12 Mar 1985

5975-01-202-2692
Electrical Conductor Bushing

012022692
L5415944-001: RNCC: 3 | RNVC: 2

28 Feb 1985

5975-01-208-2714
Motor Box

012082714
36A287255-G01: RNCC: 3 | RNVC: 2

11 May 1985

5975-01-207-7195
Strain Electrical Conductor Clamp

012077195
4P23293-101A: RNCC: 3 | RNVC: 2

4 May 1985

5975-01-208-7644
Cable Hanger

012087644
M23190/1-2: RNCC: 3 | RNVC: 2
M23190/1-2: RNCC: 3 | RNVC: 9
AS23190/1: RNCC: 5 | RNVC: 1
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190/1: RNCC: 5 | RNVC: 9
M23190/1-2: RNCC: 5 | RNVC: 9

19 May 1985

5975-01-210-2179
Electrical Box Connector

012102179
L6410327-009: RNCC: 3 | RNVC: 2

8 Jun 1985

5975-01-223-6023
Electrical Box Connector

012236023
CES-3: RNCC: 3 | RNVC: 2
CES-3: RNCC: 5 | RNVC: 9

3 Jan 1986

5975-01-223-5387
Junction Box Assembly

012235387
4G14049-103C: RNCC: 3 | RNVC: 2

31 Dec 1985

5975-01-224-7209
Rigid Metal Conduit Assembly

012247209
5904030-3: RNCC: 1 | RNVC: 2
5904030-3: RNCC: 3 | RNVC: 2
210568-DI0150: RNCC: 3 | RNVC: 2
5904030-3: RNCC: 5 | RNVC: 9

22 Jan 1986

5975-01-225-3958
Rigid Metal Conduit

012253958
5-4-5148-1: RNCC: 3 | RNVC: 2

2 Feb 1986

5975-01-228-1686
Electrical Box Connector

012281686
M1274: RNCC: 3 | RNVC: 2
M1274: RNCC: 5 | RNVC: 9

15 Mar 1986

5975-01-226-6531
Electrical Tie Down Mounting Base

012266531
ABM2S-AT-0: RNCC: 3 | RNVC: 2
ABM2S-AT-0: RNCC: 5 | RNVC: 2
7791553: RNCC: 5 | RNVC: 2
ABM-4-NBK: RNCC: 5 | RNVC: 2
AMB-4BLK: RNCC: 5 | RNVC: 9
10134305: RNCC: 6 | RNVC: 9

20 Feb 1986

5975-01-226-9709
Flat Elbow

012269709
EG2111: RNCC: 3 | RNVC: 2
G2111: RNCC: 5 | RNVC: 9

26 Feb 1986

5975-01-236-9174
Electrical Box Connector

012369174
ZA-5: RNCC: 3 | RNVC: 1
CG-6250: RNCC: 3 | RNVC: 2
RSR-1212: RNCC: 3 | RNVC: 2
0099-3-4058-3: RNCC: 5 | RNVC: 9
0099-3-4058: RNCC: 5 | RNVC: 9
82A5048A1127: RNCC: 7 | RNVC: 1

24 Jul 1986

5975-01-237-7880
Electrical Equipment Leg

012377880
1421-0000-500: RNCC: 3 | RNVC: 2
11217: RNCC: 5 | RNVC: 2

6 Aug 1986

5975-01-242-0582
Electrical Components Tie Down Strap

012420582
7134K2: RNCC: 3 | RNVC: 2

6 Oct 1986

5975-01-237-7416
Electrical Conduit Bushing

012377416
3365749-1: RNCC: 3 | RNVC: 9
3365749-1: RNCC: 5 | RNVC: 2
3365749-1: RNCC: 5 | RNVC: 2
5975PL1439128: RNCC: 6 | RNVC: 9

5 Aug 1986

5975-01-246-6908
Cable Strain Relief Bushing

012466908
1224151-6: RNCC: 3 | RNVC: 9
1224151-6: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-246-7137
Cable Terminal Chamber

012467137
7653138-30: RNCC: 3 | RNVC: 9
7653138-30: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-249-5858
Flexible Metal Conduit

012495858
309D067-1: RNCC: 3 | RNVC: 2

13 Feb 1987

5975-01-254-0420
Electrical Box Connector

012540420
3306M: RNCC: 3 | RNVC: 2
3119: RNCC: E | RNVC: 8
27-150-IT: RNCC: E | RNVC: 8

30 Apr 1987

5975-01-252-7302
Cable Hanger

012527302
AS23190: RNCC: 3 | RNVC: 1
M23190/1-7: RNCC: 3 | RNVC: 2
NMC1001-7: RNCC: 3 | RNVC: 2
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
M23190/1-7: RNCC: 5 | RNVC: 9
M23190/1-7: RNCC: 5 | RNVC: 9

6 Apr 1987

5975-01-256-3415
Strain Electrical Conductor Clamp

012563415
6650-01143-1: RNCC: 3 | RNVC: 9
6650-01143-1: RNCC: 5 | RNVC: 2
6650-01143-1: RNCC: 5 | RNVC: 9
6650-01143-1: RNCC: 5 | RNVC: 9

4 Jun 1987

5975-01-257-1054
Junction Box

012571054
BI-3-E59: RNCC: 3 | RNVC: 2
GJ800AU1E: RNCC: 5 | RNVC: 2

12 Jun 1987

5975-01-210-8104
Electrical Nonmetallic Conduit Assembly

012108104
R58HB16G36W006: RNCC: 3 | RNVC: 1
R58HB16G36W006: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-214-3510
Electrical Nonmetallic Conduit Assembly

012143510
R58HB31B34W020: RNCC: 3 | RNVC: 1
R58HB31B34W020: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

9 Aug 1985

5975-01-215-6700
Electrical Equipment Cabinet

012156700
1455750U: RNCC: 3 | RNVC: 2
9230L2000: RNCC: 5 | RNVC: 2
1455750U: RNCC: 5 | RNVC: 9

29 Aug 1985

5975-01-215-6500
Electrical Box Connector

012156500
CGB297-SG: RNCC: 3 | RNVC: 2
CG-7575S: RNCC: 5 | RNVC: 2
SHC1038SST: RNCC: E | RNVC: 8

28 Aug 1985

5975-01-215-7592
Electrical Tie Down Mounting Base

012157592
ABMM-4A: RNCC: 3 | RNVC: 2
TC5347A: RNCC: 5 | RNVC: 2
TC5347A: RNCC: 5 | RNVC: 2
08461: RNCC: 5 | RNVC: 2

30 Aug 1985

5975-01-217-1498
Electrical Cable Nipple

012171498
11-3438-5: RNCC: 3 | RNVC: 2

22 Sep 1985

5975-01-217-1539
Metallic Raceway

012171539
V2100B IVORY: RNCC: 3 | RNVC: 2
EG2100B: RNCC: 5 | RNVC: 2
G2100B: RNCC: 5 | RNVC: 2
7903811-00: RNCC: 7 | RNVC: 2

22 Sep 1985

5975-01-216-9199
Electrical Nonmetallic Conduit Assembly

012169199
251009: RNCC: 3 | RNVC: 2

18 Sep 1985

5975-01-258-6235
Electrical Nonmetallic Conduit Assembly

012586235
R58HB07B32A008: RNCC: 3 | RNVC: 2
R58HB07B32A008: RNCC: 5 | RNVC: 2
R58HB07B32A008: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-259-6848
Interconnecting Box

012596848
702055-1: RNCC: 3 | RNVC: 2
702055-1: RNCC: 3 | RNVC: 9
702055-301: RNCC: 5 | RNVC: 1
702055-301: RNCC: 5 | RNVC: 9

20 Jul 1987

5975-01-262-5790
Electrical Components Tie Down Strap

012625790
PLT8EH-C0: RNCC: 3 | RNVC: 2
WP11015-1: RNCC: 5 | RNVC: 2

31 Aug 1987

5975-01-263-3769
Electrical Box Connector

012633769
7119K63: RNCC: 3 | RNVC: 2

14 Sep 1987

5975-01-263-5315
Electrical Nonmetallic Conduit Assembly

012635315
252899: RNCC: 3 | RNVC: 2
R58HB11B31A012A: RNCC: 5 | RNVC: 2
R58HB11B31A012A: RNCC: 5 | RNVC: 9

16 Sep 1987

5975-01-263-3845
Flexible Nonmetallic Conduit

012633845
RT1150 CONVOLEX: RNCC: 3 | RNVC: 1
HCTE-0625: RNCC: 3 | RNVC: 2
GS830BM6: RNCC: 5 | RNVC: 2
GS830BMG: RNCC: 5 | RNVC: 9
RT1150 5-8: RNCC: C | RNVC: 1

14 Sep 1987

5975-01-265-5122
Junction Box

012655122
4B69135-115A: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-268-1945
Electrical Box Connector

012681945
2279: RNCC: 3 | RNVC: 2
BS-72101: RNCC: D | RNVC: 9

25 Nov 1987

5975-01-268-6437
Electrical Box Connector

012686437
1244141-3: RNCC: 3 | RNVC: 9
5372: RNCC: 5 | RNVC: 2
1244141-3: RNCC: C | RNVC: 1

4 Dec 1987

5975-01-270-4587
Junction Box

012704587
12341467: RNCC: 3 | RNVC: 2
12341467: RNCC: 3 | RNVC: 2
5598045: RNCC: 3 | RNVC: 9

7 Jan 1988

5975-01-269-6543
Electrical Grounding Plate

012696543
405-10113-501: RNCC: 3 | RNVC: 2

18 Dec 1987

5975-01-271-5668
Flexible Metal Conduit Assembly

012715668
405-10774-2: RNCC: 3 | RNVC: 2

28 Jan 1988

5975-01-275-2697
Stuffing Tube Packing Nut

012752697
M24235/1-024: RNCC: 2 | RNVC: 2
MIL-S-24235/1: RNCC: 4 | RNVC: 1
MIL-S-24235/1-024: RNCC: 5 | RNVC: 9

19 Mar 1988

5975-01-276-5228
Junction Box

012765228
B114R: RNCC: 3 | RNVC: 9
00034481100157: RNCC: 5 | RNVC: 9
6090-402: RNCC: 5 | RNVC: 9

9 Apr 1988

5975-01-121-1596
Rigid Metal Conduit Assembly

011211596
13220E8838: RNCC: 3 | RNVC: 2

31 Oct 1981

5975-01-133-6689
Strain Relief Boot

011336689
5M1729-001: RNCC: 3 | RNVC: 2
31-1277-1: RNCC: 5 | RNVC: 2
10138449: RNCC: 6 | RNVC: 9

18 Jun 1982

5975-01-135-8708
Junction Box

011358708
65560-05125-101: RNCC: 1 | RNVC: 2
B1289-101: RNCC: 3 | RNVC: 2

30 Jul 1982

5975-01-217-3272
Rigid Metal Conduit Assembly

012173272
5904030-4: RNCC: 1 | RNVC: 2
7-1477-4: RNCC: 3 | RNVC: 2
211258-DI0090: RNCC: 3 | RNVC: 2
5904030-4: RNCC: 5 | RNVC: 1

26 Sep 1985

5975-01-218-3319
Junction Box

012183319
AB-12105JFH: RNCC: 3 | RNVC: 2
A1210CHNF: RNCC: 3 | RNVC: 2
A1210CHNF: RNCC: 5 | RNVC: 2
A2110CHNF: RNCC: 5 | RNVC: 9
E-1210CHNF: RNCC: 5 | RNVC: 9
A1210CHNF: RNCC: 5 | RNVC: 9

10 Oct 1985

5975-01-216-8554
Electrical Equipment Mounting Base

012168554
1416310W: RNCC: 3 | RNVC: 2
1416310W: RNCC: 5 | RNVC: 9

17 Sep 1985

5975-01-219-2005
Junction Box

012192005
1464640: RNCC: 3 | RNVC: 2
1464640: RNCC: 5 | RNVC: 9

23 Oct 1985

5975-01-219-8432
Electrical Conduit Elbow

012198432
033597-0003: RNCC: 3 | RNVC: 2
LMFL90-100: RNCC: 5 | RNVC: 2
LMFL90-100: RNCC: C | RNVC: 1

3 Nov 1985

5975-01-210-6636
Rigid Metal Conduit

012106636
4G14349-101A: RNCC: 3 | RNVC: 2

15 Jun 1985

5975-01-068-7376
Electrical Equipment Shelf

010687376
1494-0015: RNCC: 3 | RNVC: 9
1494-0015: RNCC: 5 | RNVC: 9
10350764: RNCC: 6 | RNVC: 9
1494-0015: RNCC: C | RNVC: 1

1 Dec 1978

5975-01-069-9511
Electrical-Electronic Equipment Chassis

010699511
CU1099: RNCC: 3 | RNVC: 2
6902259: RNCC: C | RNVC: 1

29 Dec 1978

5975-01-073-6184
Electrical Equipment Mounting Base

010736184
792-6917-003: RNCC: 3 | RNVC: 2
797-7685-001: RNCC: 5 | RNVC: 1

18 Mar 1979

5975-01-075-0576
Electrical Box

010750576
4B69133-103A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0570
Electrical Box

010750570
4B69131-103A: RNCC: 3 | RNVC: 2
4B69131-103A: RNCC: 5 | RNVC: 2

12 Apr 1979

5975-01-078-4106
Electrical Wall Plate

010784106
SS26: RNCC: 3 | RNVC: 9
S26N: RNCC: 5 | RNVC: 9

12 Jun 1979

5975-01-079-4087
Electric Box

010794087
4B69151-105A: RNCC: 3 | RNVC: 2
4B69151-105A: RNCC: 5 | RNVC: 2

5 Jul 1979

5975-01-079-4085
Box Junction Cover

010794085
M129-52: RNCC: 3 | RNVC: 2
M129-52: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-080-2679
Electrical Conduit Locknut

010802679
142-TB: RNCC: 3 | RNVC: 2
142: RNCC: 5 | RNVC: 9
54B6891H06: RNCC: 7 | RNVC: 2

22 Jul 1979

5975-01-085-4520
Electrical Conductor Bushing

010854520
20350-1080: RNCC: 3 | RNVC: 2

8 Nov 1979

5975-01-091-7849
Electrical Conduit Locknut

010917849
10959867: RNCC: 3 | RNVC: 2

13 Mar 1980

5975-01-092-8655
Electrical Conductor Bushing

010928655
12408: RNCC: 3 | RNVC: 2

5 Apr 1980

5975-01-098-8573
Electrical Box Connector

010988573
CGB195 SG: RNCC: 3 | RNVC: 2
SR-50-625: RNCC: 5 | RNVC: 9
CGB195-SG: RNCC: 5 | RNVC: 9

8 Aug 1980

5975-01-101-4301
Bushing

011014301
1617214-1: RNCC: 3 | RNVC: 2

30 Sep 1980

5975-01-103-4260
Lightening Hole Cable Mount

011034260
LHMSS5: RNCC: 3 | RNVC: 2

13 Nov 1980

5975-01-115-1315
Rigid Metal Conduit Assembly

011151315
4B69143-137A: RNCC: 3 | RNVC: 2

28 Jun 1981

5975-01-117-9491
Stuffing Tube

011179491
54016-3: RNCC: 3 | RNVC: 2
147206-1: RNCC: 5 | RNVC: 1
54016-1: RNCC: 5 | RNVC: 9
147206-1: RNCC: C | RNVC: 1

24 Aug 1981

5975-01-118-8368
Electrical Conduit Adapter

011188368
RP2321-03-06: RNCC: 3 | RNVC: 1
RP2321-03-06: RNCC: 3 | RNVC: 1
RP2321-03-06SM: RNCC: 3 | RNVC: 2
S82321-03-06: RNCC: 5 | RNVC: 1
RP2321-03-06: RNCC: 5 | RNVC: 2
S82321-03-06: RNCC: 5 | RNVC: 9
RP2321-03-06: RNCC: 5 | RNVC: 9
164-201-1S: RNCC: C | RNVC: 1
RP2320-03-06: RNCC: C | RNVC: 1
RP2321-(0.9375-: RNCC: C | RNVC: 1

12 Sep 1981

5975-01-118-8371
Electrical Conduit Coupling

011188371
7000-690-EM05: RNCC: 3 | RNVC: 2
RP2200-EM05: RNCC: 3 | RNVC: 2
S82200-EM05: RNCC: 3 | RNVC: 2
RP2200-EM05: RNCC: 5 | RNVC: 1
S82200-EM05: RNCC: 5 | RNVC: 9
RP2200-G05: RNCC: 5 | RNVC: 9
RP2200-F05: RNCC: 5 | RNVC: 9
RP2200-EM05: RNCC: 7 | RNVC: 1

12 Sep 1981

5975-01-119-0190
Flexible Metal Conduit Assembly

011190190
10911023: RNCC: 1 | RNVC: 2
W-1297-16: RNCC: 3 | RNVC: 2
179489-1800: RNCC: 3 | RNVC: 2
9711297: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

16 Sep 1981

5975-01-121-0741
Conduit Connector

011210741
81010: RNCC: 3 | RNVC: 9
FEH01-M32: RNCC: 5 | RNVC: 2
81010: RNCC: 5 | RNVC: 9
81010: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-121-1359
Electrical Tie Down Mounting Base

011211359
TC824: RNCC: 3 | RNVC: 2
717612-8: RNCC: 7 | RNVC: 2

31 Oct 1981

5975-01-123-2823
Electrical Conduit Coupling Nut

011232823
31-4741-1: RNCC: 3 | RNVC: 2
10134290: RNCC: 6 | RNVC: 9

10 Dec 1981

5975-01-123-9103
Ground Rod Section

011239103
635830: RNCC: 3 | RNVC: 2
6253: RNCC: 5 | RNVC: 9
W-583: RNCC: 5 | RNVC: 9

19 Dec 1981

5975-01-125-7523
Electrical Conductor Bushing

011257523
74B878001-125: RNCC: 1 | RNVC: 2
CT0904-03A: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-125-7524
Electrical Cable Nipple

011257524
283A8009P1: RNCC: 3 | RNVC: 2
10134285: RNCC: 6 | RNVC: 9

1 Feb 1982

5975-01-126-8352
Electrical Components Tie Down Strap

011268352
9475824-10: RNCC: 3 | RNVC: 2
9475824-10: RNCC: 5 | RNVC: 9
7000988-2: RNCC: 5 | RNVC: 9

17 Feb 1982

5975-01-129-8366
Kit Sealing Boot

011298366
CH06-0261-023: RNCC: 3 | RNVC: 2
GB806AH1: RNCC: 7 | RNVC: 2

12 Apr 1982

5975-01-130-2579
Junction Box Cover

011302579
65560-03151-103: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-131-9487
Electrical Box Connector

011319487
SHC-1018: RNCC: 3 | RNVC: 2
DHF9S176: RNCC: E | RNVC: 8
G6015252: RNCC: E | RNVC: 8

19 May 1982

5975-01-134-2271
Ctj Rail

011342271
CTJ3A05-4021: RNCC: 3 | RNVC: 2

2 Jul 1982

5975-01-136-4148
Blank Panel

011364148
74A802615-1006: RNCC: 3 | RNVC: 2
74A802615-1006: RNCC: 5 | RNVC: 9
10154463: RNCC: 6 | RNVC: 9

8 Aug 1982

5975-01-140-0795
Electrical-Electronic Equipment Chassis

011400795
800-RHW-02-01-4: RNCC: 3 | RNVC: 2

7 Oct 1982

5975-01-144-2246
Ground Rod

011442246
ACC-1-2-6-BA-8-HA: RNCC: 3 | RNVC: 2
C50000339-1: RNCC: 5 | RNVC: 9
ACC-1-2-6-B-8-HA: RNCC: 5 | RNVC: 9
ACC-1-2-6-B: RNCC: 5 | RNVC: 9
SM-A-801254-1: RNCC: 7 | RNVC: 2
SM-A-801254: RNCC: D | RNVC: 9

16 Dec 1982

5975-01-146-0947
Conduit Outlet

011460947
59202: RNCC: 3 | RNVC: 2
E986F: RNCC: 5 | RNVC: 2
SML000367: RNCC: 5 | RNVC: 2
E986F: RNCC: 5 | RNVC: 9

24 Jan 1983

5975-01-148-4648
Electrical Tie Down Mounting Base

011484648
LPMM-S5-C: RNCC: 3 | RNVC: 2
LPMM-S5: RNCC: 5 | RNVC: 2
PMS3339-002-01: RNCC: 5 | RNVC: 2
LPMM-S5: RNCC: 5 | RNVC: 2
25233-00673: RNCC: 5 | RNVC: 9
13229787: RNCC: 7 | RNVC: 2
25233-00673: RNCC: C | RNVC: 1
86-1345415-2: RNCC: D | RNVC: 9

6 Mar 1983

5975-01-148-6291
Electrical-Electronic Equipment Chassis

011486291
605-012-001: RNCC: 3 | RNVC: 2
605-012-001: RNCC: 5 | RNVC: 1

8 Mar 1983

5975-01-149-6328
Electrical-Electronic Equipment Chassis

011496328
647-3189-001: RNCC: 3 | RNVC: 2
647-319-001: RNCC: C | RNVC: 1

23 Mar 1983

5975-01-156-8968
Blank Panel

011568968
74A802613-1004: RNCC: 3 | RNVC: 2
74A802613-1004: RNCC: 5 | RNVC: 9
74A803613-1004: RNCC: 5 | RNVC: 9
10154466: RNCC: 6 | RNVC: 9

27 Jun 1983

5975-01-157-4147
Electrical Components Tie Down Strap

011574147
8428099: RNCC: 3 | RNVC: 2

5 Jul 1983

5975-01-158-5092
Cable Pressure Pad

011585092
RE-B102121-2: RNCC: 3 | RNVC: 2
ASC1539735: RNCC: 5 | RNVC: 9
RE-D102121-2: RNCC: C | RNVC: 1

25 Jul 1983

5975-01-178-4505
Stuffing Tube Packing Nut

011784505
M24235/9-066: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-178-4508
Stuffing Tube Packing Nut

011784508
M24235/9-062: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-179-6225
Blank Panel

011796225
A8P6AL: RNCC: 3 | RNVC: 2

19 May 1984

5975-01-180-9789
Arrangement Conduit

011809789
P12613065N: RNCC: 3 | RNVC: 2
P12613065N: RNCC: 3 | RNVC: 9

6 Jun 1984

5975-01-182-2068
Junction Box

011822068
5035443-1: RNCC: 3 | RNVC: 2
5035443-1: RNCC: 5 | RNVC: 2
5035443-1: RNCC: 5 | RNVC: 9

22 Jun 1984

5975-01-180-9785
Block Assembly Junction

011809785
P12613007: RNCC: 3 | RNVC: 9
P12613007: RNCC: C | RNVC: 1

6 Jun 1984

5975-01-186-9954
Conduit Outlet

011869954
5345-0: RNCC: 3 | RNVC: 2
277-5L: RNCC: 5 | RNVC: 9
5345: RNCC: 5 | RNVC: 9

17 Aug 1984

5975-01-163-1098
Cable Marker Sleeve

011631098
SS7074-1692: RNCC: 3 | RNVC: 2
SS7074-1692: RNCC: 5 | RNVC: 2
SS7074-1692: RNCC: 5 | RNVC: 2

28 Sep 1983

5975-01-167-5797
Electrical Box Connector

011675797
3207: RNCC: 3 | RNVC: 2
GC817Y1: RNCC: 7 | RNVC: 2
62828-90216-1: RNCC: C | RNVC: 1

1 Dec 1983

5975-01-171-2841
Cable Hanger

011712841
691163-0001: RNCC: 3 | RNVC: 2
858435-1: RNCC: 5 | RNVC: 2
691163-1: RNCC: 5 | RNVC: 9
691163: RNCC: C | RNVC: 1

4 Feb 1984

5975-01-173-9578
Blank Panel

011739578
5381310: RNCC: 3 | RNVC: 2
A12P10SS: RNCC: 5 | RNVC: 2
A12P10SS: RNCC: C | RNVC: 1

13 Mar 1984

5975-01-174-3601
Conduit Outlet

011743601
T100-A: RNCC: 3 | RNVC: 2
OT-3: RNCC: 3 | RNVC: 2
9322116: RNCC: 7 | RNVC: 2

16 Mar 1984

5975-01-174-9373
Junction Box

011749373
A806NFAL: RNCC: 3 | RNVC: 2
A806NFAL: RNCC: 3 | RNVC: 2
AB-864JCA: RNCC: 5 | RNVC: 2
E-806NFAL: RNCC: 5 | RNVC: 9

24 Mar 1984

5975-01-175-2031
Electrical Conduit Elbow

011752031
823: RNCC: 3 | RNVC: 2
823: RNCC: 3 | RNVC: 9
7-1203: RNCC: 5 | RNVC: 9
9290908: RNCC: 7 | RNVC: 2
FFL125: RNCC: E | RNVC: 8
FF-125: RNCC: E | RNVC: 8

28 Mar 1984

5975-01-175-3168
Electrical Wall Plate

011753168
7424: RNCC: 3 | RNVC: 2

29 Mar 1984

5975-01-195-8701
Electrical Box Connector

011958701
3721: RNCC: 3 | RNVC: 2
3902: RNCC: 5 | RNVC: 9

4 Dec 1984

5975-01-198-7178
Electrical Equipment Mounting Base

011987178
622-6985-001: RNCC: 3 | RNVC: 2
MT6369/ARC-190: RNCC: 5 | RNVC: 1
622-6895-001: RNCC: 5 | RNVC: 9
4K95000-143A: RNCC: 5 | RNVC: 9

11 Jan 1985

5975-01-199-9037
Rigid Metal Conduit

011999037
795-9024-001: RNCC: 3 | RNVC: 2
795-9024-001: RNCC: 5 | RNVC: 9

28 Jan 1985

5975-01-201-1019
Electrical Conduit Ferrule

012011019
16022-SS-6B: RNCC: 3 | RNVC: 2
7244752: RNCC: 5 | RNVC: 2
2326111: RNCC: 5 | RNVC: 9
16022-SS-6B: RNCC: 5 | RNVC: 9

12 Feb 1985

5975-01-207-0231
Electrical Box Connector

012070231
NHC-1023: RNCC: 3 | RNVC: 2
NHC-1023: RNCC: 3 | RNVC: 9
5035887-1: RNCC: 7 | RNVC: 9

26 Apr 1985

5975-01-208-5760
Electrical Cable Nipple

012085760
12719785-2: RNCC: 3 | RNVC: 2
12719786-2: RNCC: 5 | RNVC: 2
202F242-51: RNCC: 5 | RNVC: 2
202F242-5: RNCC: 5 | RNVC: 9
EP-202F242: RNCC: 5 | RNVC: 9
313F353-9: RNCC: 5 | RNVC: 9
13238510-4: RNCC: 7 | RNVC: 2

15 May 1985

5975-01-209-5479
Rigid Metal Conduit

012095479
121-50726-1: RNCC: 3 | RNVC: 2

1 Jun 1985

5975-01-228-9530
Electrical Nonmetallic Conduit Assembly

012289530
R58HB16H55W012D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

22 Mar 1986

5975-01-230-5891
Conduit Outlet

012305891
122-52827-1: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-231-5231
Conduit Outlet

012315231
OLL-2: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-231-6081
Electrical Equipment Cabinet

012316081
276079: RNCC: 3 | RNVC: 2

30 Apr 1986

5975-01-238-9555
Adapter

012389555
6166890: RNCC: 3 | RNVC: 2
014000-4000: RNCC: 5 | RNVC: 2

23 Aug 1986

5975-01-238-9564
Quadrax Adapter

012389564
019900-4004: RNCC: 3 | RNVC: 2
6166887: RNCC: 5 | RNVC: 2

23 Aug 1986

5975-01-239-2353
Cable Hanger

012392353
101-107-451: RNCC: 3 | RNVC: 2

27 Aug 1986

5975-01-243-9962
Blank Panel

012439962
GP500DG-5: RNCC: 3 | RNVC: 2
G436-5: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-244-6407
Ground Rod Section

012446407
13225E3032-35: RNCC: 3 | RNVC: 2
60C: RNCC: 5 | RNVC: 9
60C: RNCC: 5 | RNVC: 9

15 Nov 1986

5975-01-246-6909
Cable Strain Relief Bushing

012466909
1224151-7: RNCC: 3 | RNVC: 9
1224151-7: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-247-2080
Cable Marker Sleeve

012472080
TMS 1/4-1.50: RNCC: 3 | RNVC: 2
GM802J25: RNCC: 5 | RNVC: 2
HS5189-1251: RNCC: 5 | RNVC: 9
HS5189-1251: RNCC: 7 | RNVC: 2

29 Dec 1986

5975-01-246-6905
Cable Strain Relief Bushing

012466905
1224151-3: RNCC: 3 | RNVC: 2
1224151-3: RNCC: 3 | RNVC: 9
1224151-3: RNCC: 5 | RNVC: 9

18 Dec 1986

5975-01-251-1250
Electrical Equipment Mounting Base

012511250
622-8619-001: RNCC: 3 | RNVC: 2
MT-6586/S: RNCC: 5 | RNVC: 2
ASC1564936: RNCC: 5 | RNVC: 9

13 Mar 1987

5975-01-251-7566
Electrical Box Connector

012517566
2574: RNCC: 3 | RNVC: 2

24 Mar 1987

5975-01-253-6583
Electrical Cable Protector

012536583
YJ4-125H: RNCC: 3 | RNVC: 9
PSI-4HM: RNCC: 5 | RNVC: 9
YJ4-125YB: RNCC: 5 | RNVC: 9
YJ4-125H: RNCC: 5 | RNVC: 9

23 Apr 1987

5975-01-254-1635
Electrical Nonmetallic Conduit Assembly

012541635
R58HB06B36W048: RNCC: 3 | RNVC: 2
R58HB03B36W048: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

2 May 1987

NSN 5975-01-254-8380 012548380 COVER,CONDUIT OUTLET

5975-01-254-8380
Conduit Outlet Cover

012548380
G-3043BE: RNCC: 3 | RNVC: 2

11 May 1987

5975-01-256-4538
Electrical Equipment Rack

012564538
209-071-526-101: RNCC: 3 | RNVC: 2

5 Jun 1987

5975-01-255-9577
Flexible Nonmetallic Conduit

012559577
M81914/1-1001: RNCC: 2 | RNVC: 1
SAE-AS81914/4: RNCC: 5 | RNVC: 1
SAE-AS81914/1: RNCC: 5 | RNVC: 1
T0610A00: RNCC: 5 | RNVC: 1
MIL-T-81914/1: RNCC: 5 | RNVC: 9

30 May 1987

5975-01-212-3651
Cable Shield Adapter

012123651
CSGA-L: RNCC: 3 | RNVC: 2
GA/CSGA-L: RNCC: 5 | RNVC: 2
CSGA-L: RNCC: 5 | RNVC: 9

11 Jul 1985

5975-01-214-3499
Electrical Nonmetallic Conduit Assembly

012143499
R58HB06D45W010A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

9 Aug 1985

5975-01-214-8508
Electrical Nonmetallic Conduit Assembly

012148508
R58HA04B33W010: RNCC: 3 | RNVC: 1
R58HA04B33W010: RNCC: 5 | RNVC: 9
R58HA: RNCC: D | RNVC: 9

16 Aug 1985

5975-01-258-4333
Rigid Metal Conduit Assembly

012584333
75A602502-1001: RNCC: 3 | RNVC: 2

3 Jul 1987

5975-01-257-3117
Electrical Components Tie Down Strap

012573117
PLF1MA: RNCC: 3 | RNVC: 2
CV0677-001: RNCC: 5 | RNVC: 2

17 Jun 1987

5975-01-260-1302
Electrical Components Tie Down Strap

012601302
1049-40: RNCC: 3 | RNVC: 2

26 Jul 1987

5975-01-260-7134
Junction Box

012607134
L6410070-009: RNCC: 3 | RNVC: 2

4 Aug 1987

5975-01-262-8475
Electrical Box Connector

012628475
SHC1036: RNCC: 3 | RNVC: 2
64-0179: RNCC: C | RNVC: 1

4 Sep 1987

5975-01-265-3116
Electrical Components Tie Down Strap

012653116
MLT2S-CP: RNCC: 3 | RNVC: 2
0241 1262: RNCC: 5 | RNVC: 2
ST45D52-1: RNCC: 7 | RNVC: 2

11 Oct 1987

5975-01-270-8552
Junction Box Cover

012708552
5597326: RNCC: 3 | RNVC: 1
12341003: RNCC: 3 | RNVC: 2

14 Jan 1988

5975-01-271-0322
Electrical Equipment Mounting Base

012710322
12359325: RNCC: 3 | RNVC: 2

16 Jan 1988

5975-01-271-4008
Electrical Conduit Bushing

012714008
12354871: RNCC: 3 | RNVC: 2

23 Jan 1988

5975-01-273-7757
Electrical Conduit Bend

012737757
Z1621C40: RNCC: 1 | RNVC: 2
LMS9-29: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-274-0320
Junction Box

012740320
A6044SC: RNCC: 3 | RNVC: 2
5122609-015-101: RNCC: 7 | RNVC: 2

4 Mar 1988

5975-01-277-5822
Electrical Conduit Adapter

012775822
C036AX1212DC: RNCC: 3 | RNVC: 2
5122609-031-145: RNCC: 5 | RNVC: 2

23 Apr 1988

5975-01-279-7544
Interconnecting Box

012797544
5100574: RNCC: 3 | RNVC: 9
5100574: RNCC: 5 | RNVC: 2
5100574: RNCC: 7 | RNVC: 2

24 May 1988

5975-01-280-0533
Electrical Conduit Locknut

012800533
040-141: RNCC: 3 | RNVC: 2
5054520-15: RNCC: 5 | RNVC: 9
5054520: RNCC: 7 | RNVC: 9

29 May 1988

5975-01-280-8922
Electrical Cable Nipple

012808922
550N9V14: RNCC: 3 | RNVC: 2
5501: RNCC: 5 | RNVC: 9
5597325: RNCC: 5 | RNVC: 9
5975012808922: RNCC: 6 | RNVC: 9

14 Jun 1988

5975-01-282-8825
Clevis Adapter

012828825
21170: RNCC: 3 | RNVC: 2
21170-1: RNCC: 5 | RNVC: 9

24 Jul 1988

5975-01-067-0425
Transd Junction Box

010670425
8TY34AAB1: RNCC: 3 | RNVC: 2
8TY34AAB: RNCC: 5 | RNVC: 9

24 Oct 1978

5975-01-067-7638
Electrical Conduit

010677638
68A230167-2007: RNCC: 3 | RNVC: 2
68A230167-2005: RNCC: 5 | RNVC: 9

6 Nov 1978

5975-01-068-8816
Electrical Equipment Mounting Base

010688816
10-30353-537: RNCC: 1 | RNVC: 2
22835-1: RNCC: 3 | RNVC: 2
22835-1: RNCC: 5 | RNVC: 2

6 Dec 1978

5975-01-073-9853
Electrical Wall Plate

010739853
12285346: RNCC: 3 | RNVC: 2

24 Mar 1979

5975-01-075-0582
Electrical Box

010750582
4B69151-119A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-8946
Conduit Outlet

010758946
3606: RNCC: 3 | RNVC: 2
SC5975-0065-3: RNCC: 5 | RNVC: 9
3606: RNCC: 5 | RNVC: 9
GJ800AY1: RNCC: 7 | RNVC: 2

29 Apr 1979

5975-01-078-0332
Electrical Equipment Mounting Base

010780332
622-1319-001: RNCC: 3 | RNVC: 2
622-1319-001: RNCC: 3 | RNVC: 2
16VZ001-6: RNCC: 5 | RNVC: 1
MT-4608/ARN-108: RNCC: 5 | RNVC: 9
16VE032002-1: RNCC: 7 | RNVC: 2

5 Jun 1979

5975-01-078-7597
Electrical Modular Receptacle Connector

010787597
12273236-3: RNCC: 3 | RNVC: 2
CTJ-1-20-E-01B-513: RNCC: 5 | RNVC: 2

20 Jun 1979

5975-01-079-3940
Junction Box

010793940
95: RNCC: 3 | RNVC: 2
410: RNCC: 5 | RNVC: 2

4 Jul 1979

5975-01-079-4081
Box Junction Cover

010794081
M129-54: RNCC: 3 | RNVC: 2
M129-54: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-083-0149
Electrical Conductor Bushing

010830149
BBL150: RNCC: 3 | RNVC: 9
C70412-15: RNCC: 5 | RNVC: 9

14 Sep 1979

5975-01-083-3162
Electrical Cable Nipple

010833162
12273147-220: RNCC: 1 | RNVC: 2
202F221-51-0: RNCC: 3 | RNVC: 2
13238510-2: RNCC: 5 | RNVC: 1
313F332-9: RNCC: 5 | RNVC: 2
313F332-9: RNCC: 5 | RNVC: 9
202F221-51: RNCC: 5 | RNVC: 9
313F332-9: RNCC: 5 | RNVC: 9
12273147: RNCC: D | RNVC: 9

21 Sep 1979

5975-01-084-8216
Transmission Line Grounding Set

010848216
4491155-G-30: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-089-5477
Flexible Metal Conduit

010895477
CABC20-3N-6702: RNCC: 3 | RNVC: 2

4 Feb 1980

5975-01-090-4772
Blank Panel

010904772
9M381A0: RNCC: 3 | RNVC: 2
9M381A0: RNCC: 5 | RNVC: 9

18 Feb 1980

5975-01-094-2362
Electrical Tie Down Mounting Base

010942362
317762-1: RNCC: 3 | RNVC: 2
317762-1: RNCC: 5 | RNVC: 2
317762-P1: RNCC: 5 | RNVC: 9
317762-1: RNCC: 5 | RNVC: 9
11442329: RNCC: 5 | RNVC: 9

6 May 1980

5975-01-095-3157
Adhes Mounting Base

010953157
16580: RNCC: 3 | RNVC: 2
TC-5342A: RNCC: 5 | RNVC: 2

29 May 1980

5975-01-104-1128
Flexible Nonmetallic Conduit

011041128
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1004: RNCC: 3 | RNVC: 2
M81914/4-1204: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
M81914/4-1204: RNCC: 5 | RNVC: 9
10150496: RNCC: 6 | RNVC: 9

27 Nov 1980

5975-01-111-2203
Electrical Wall Plate

011112203
G3046BE: RNCC: 3 | RNVC: 2
SM-D-887872-2: RNCC: 3 | RNVC: 2
G-3046B: RNCC: 5 | RNVC: 9
0099-3-3069: RNCC: 5 | RNVC: 9

12 Apr 1981

5975-01-112-0837
Electrical Box Connector

011120837
1803: RNCC: 3 | RNVC: 2
NTC-75: RNCC: 3 | RNVC: 2
NT2751: RNCC: 5 | RNVC: 9
31-075: RNCC: 5 | RNVC: 9

26 Apr 1981

5975-01-112-3115
Electrical Box Connector

011123115
ZA-16: RNCC: 3 | RNVC: 2
GC830C39: RNCC: 7 | RNVC: 2
DB33916: RNCC: E | RNVC: 8
RSR-309: RNCC: E | RNVC: 8

1 May 1981

5975-01-112-6595
Rigid Metal Conduit Assembly

011126595
4B69142-135A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6602
Rigid Metal Conduit Assembly

011126602
4B69143-135A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-114-1519
Insulator Bracket

011141519
70902-01087-104: RNCC: 3 | RNVC: 2

11 Jun 1981

5975-01-118-7633
Juncti Box Assembly

011187633
204-53149-6: RNCC: 3 | RNVC: 2

11 Sep 1981

5975-01-118-8369
Electrical Conduit Coupling

011188369
RP2200-F03: RNCC: 3 | RNVC: 2
RP2200-EM03: RNCC: 3 | RNVC: 2
RP2200-F03: RNCC: 3 | RNVC: 9
700-670: RNCC: 5 | RNVC: 1
S82200: RNCC: 5 | RNVC: 1
RP2200: RNCC: 5 | RNVC: 1
S82200-F03: RNCC: 5 | RNVC: 9
RP2200-G03: RNCC: 5 | RNVC: 9
S82200: RNCC: 5 | RNVC: 9

12 Sep 1981

5975-01-124-2341
Electrical Components Tie Down Strap

011242341
PRT1.5S-C: RNCC: 3 | RNVC: 2
PLT1.5S: RNCC: E | RNVC: 8

28 Dec 1981

5975-01-120-0297
Electrical Conductor Bushing

011200297
2057: RNCC: 3 | RNVC: 2
K500-250: RNCC: 5 | RNVC: 2
C5114364-3: RNCC: 5 | RNVC: 9

9 Oct 1981

5975-01-127-5104
Electrical Conductor Bushing

011275104
CRN2948: RNCC: 3 | RNVC: 2
5M1697-001: RNCC: 5 | RNVC: 2
10134273: RNCC: 6 | RNVC: 9

2 Mar 1982

5975-01-129-3473
Blank Panel

011293473
9M381B3: RNCC: 3 | RNVC: 2
9M381B3: RNCC: 5 | RNVC: 9

5 Apr 1982

5975-01-132-6173
Safety Sign Book

011326173
PSSB-13: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-01-136-4988
Electrical Equipment Cabinet

011364988
CU-3010A: RNCC: 3 | RNVC: 2

10 Aug 1982

5975-01-137-0206
Electrical Equipment Mounting Base

011370206
641-4337-001: RNCC: 3 | RNVC: 2

19 Aug 1982

5975-01-138-7413
Electrical Components Tie Down Strap

011387413
TY-532M: RNCC: 3 | RNVC: 2

19 Sep 1982

5975-01-139-5135
Electrical Components Tie Down Strap

011395135
TY24M-8: RNCC: 3 | RNVC: 2
1400-0493: RNCC: 7 | RNVC: 2
TYB-24M-8: RNCC: C | RNVC: 1

4 Oct 1982

5975-01-139-6797
Rigid Metal Conduit Assembly

011396797
2718057: RNCC: 3 | RNVC: 2
10172980: RNCC: 6 | RNVC: 9

5 Oct 1982

5975-01-140-0761
Cable Marker Sleeve

011400761
TMS-SCE-3/4-2.0-9: RNCC: 3 | RNVC: 1
215511T85: RNCC: 3 | RNVC: 2
RNF-100-3/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T85: RNCC: 7 | RNVC: 2

7 Oct 1982

5975-01-140-3081
Electrical Conductor Bushing

011403081
74B878001-109: RNCC: 1 | RNVC: 2
CT0904-05C: RNCC: 3 | RNVC: 2
CT0904-109: RNCC: 5 | RNVC: 9
174B878001-109: RNCC: C | RNVC: 1

11 Oct 1982

5975-01-142-2925
Electrical Conduit Bend

011422925
ANSI/UL797: RNCC: 3 | RNVC: 1
12275225: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-144-1907
Electrical Conduit Adapter

011441907
E943H: RNCC: 3 | RNVC: 9
E943H: RNCC: 5 | RNVC: 2
E943H: RNCC: 5 | RNVC: 2
00034481062059: RNCC: 5 | RNVC: 9

16 Dec 1982

5975-01-145-7210
Electrical Conduit Coupling

011457210
E940D: RNCC: 3 | RNVC: 2
E940D: RNCC: 5 | RNVC: 9
00034481061014: RNCC: 5 | RNVC: 9

17 Jan 1983

5975-01-145-7211
Electrical Conduit Coupling

011457211
E940E: RNCC: 3 | RNVC: 9
00034481061021: RNCC: 5 | RNVC: 9

17 Jan 1983

5975-01-145-7407
Conduit Outlet

011457407
5133668: RNCC: 3 | RNVC: 2
E986J: RNCC: 5 | RNVC: 2
00034881065469: RNCC: 5 | RNVC: 9
00034481065463: RNCC: 5 | RNVC: 9
E986J: RNCC: 5 | RNVC: 9
E986J: RNCC: 5 | RNVC: 9

18 Jan 1983

5975-01-146-4796
Conduit Outlet

011464796
E983H: RNCC: 3 | RNVC: 2
E983H: RNCC: 3 | RNVC: 9

31 Jan 1983

5975-01-148-1501
Rigid Metal Conduit

011481501
65610-02050-103: RNCC: 3 | RNVC: 2

1 Mar 1983

5975-01-148-4589
Junction Box Cover

011484589
10-7056-01: RNCC: 3 | RNVC: 2

6 Mar 1983

5975-01-152-1960
Electrical Tie Down Mounting Base

011521960
TM3S8: RNCC: 3 | RNVC: 2
5D0061-4: RNCC: 5 | RNVC: 2
10617374-2: RNCC: 5 | RNVC: 2
STBP19M-11: RNCC: 5 | RNVC: 2
0679068: RNCC: 5 | RNVC: 2
PNUTM3S8: RNCC: 5 | RNVC: 9
G470082-8: RNCC: 7 | RNVC: 2

28 Apr 1983

5975-01-152-9353
Electrical Conduit Bushing

011529353
74B878001-127: RNCC: 1 | RNVC: 2
CT0904-127: RNCC: 3 | RNVC: 2
74B878001-127: RNCC: 5 | RNVC: 2
10134288: RNCC: 6 | RNVC: 9

11 May 1983

5975-01-157-4305
Junction Box Cover

011574305
2225880: RNCC: 3 | RNVC: 2
2BD721: RNCC: 5 | RNVC: 9
2BD726: RNCC: 5 | RNVC: 9
2225880: RNCC: 5 | RNVC: 9
45B007-P3: RNCC: 5 | RNVC: 9

6 Jul 1983

5975-01-158-0357
Electrical Box Connector

011580357
3213: RNCC: 3 | RNVC: 2
28668018-3: RNCC: 5 | RNVC: 9
8668018-3: RNCC: 5 | RNVC: 9
12364102-1: RNCC: 7 | RNVC: 2
28668018-3: RNCC: C | RNVC: 1
8668018-3: RNCC: C | RNVC: 1

15 Jul 1983

5975-01-181-2607
Electrical Tie Down Mounting Base

011812607
TC-817-TB: RNCC: 3 | RNVC: 2
650-40203: RNCC: 5 | RNVC: 1
988372-1: RNCC: 5 | RNVC: 1
352250022769: RNCC: 5 | RNVC: 2
5800583-096200-013: RNCC: 5 | RNVC: 2
T255-201: RNCC: 5 | RNVC: 2
TC-817: RNCC: 5 | RNVC: 9
TC-817: RNCC: 5 | RNVC: 9
T255-201: RNCC: 5 | RNVC: 9
8478A35H01: RNCC: C | RNVC: 1

8 Jun 1984

5975-01-183-8749
Electrical Box Connector

011838749
8525: RNCC: 3 | RNVC: 2
HC-705: RNCC: 5 | RNVC: 1
SRNTC150: RNCC: 5 | RNVC: 1
154: RNCC: 5 | RNVC: 9
3106: RNCC: 5 | RNVC: 9
28-150T: RNCC: 5 | RNVC: 9
1724B: RNCC: 5 | RNVC: 9

11 Jul 1984

5975-01-184-4834
Flexible Metal Conduit Assembly

011844834
8711301: RNCC: 1 | RNVC: 2
179489-1300: RNCC: 3 | RNVC: 2
W-1297-5: RNCC: 3 | RNVC: 2
8711297: RNCC: D | RNVC: 9

18 Jul 1984

5975-01-189-1360
Stuffing Tube

011891360
8-3070-009: RNCC: 3 | RNVC: 2

12 Sep 1984

5975-01-192-2906
Junction Box

011922906
A16H12BLP: RNCC: 3 | RNVC: 2
AB-16128NF: RNCC: 3 | RNVC: 2
1418N4B8UL: RNCC: 5 | RNVC: 2
E-16H12B: RNCC: 5 | RNVC: 9
A161208LP: RNCC: 5 | RNVC: 9

19 Oct 1984

5975-01-162-2694
Electrical Tie Down Mounting Base

011622694
TP2-C: RNCC: 3 | RNVC: 2
TP2: RNCC: 5 | RNVC: 9
5262514-002: RNCC: 7 | RNVC: 2

17 Sep 1983

5975-01-164-3737
Electrical Conduit Locknut

011643737
LD482-0049-0002: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-164-3738
Electrical Conduit Locknut

011643738
LD482-0049-0003: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-167-7952
Flexible Nonmetallic Conduit

011677952
2250210: RNCC: 3 | RNVC: 2
2AN679: RNCC: 5 | RNVC: 9
45A079-P1: RNCC: 5 | RNVC: 9
2250210: RNCC: 5 | RNVC: 9
45A079-P1: RNCC: 5 | RNVC: 9

6 Dec 1983

5975-01-170-2631
Receptacle Dust Cover

011702631
BLRCW19: RNCC: 3 | RNVC: 9
GC860HA19CW: RNCC: 5 | RNVC: 2
BLRCW-19: RNCC: 5 | RNVC: 9

22 Jan 1984

5975-01-174-3568
Electrical Conduit Coupling

011743568
5050S: RNCC: 3 | RNVC: 2
TK-121: RNCC: 5 | RNVC: 2
TWC50-S: RNCC: 5 | RNVC: 9
5030: RNCC: 5 | RNVC: 9

16 Mar 1984

5975-01-173-9591
Junction Box

011739591
A1614NFAL: RNCC: 3 | RNVC: 2
AB-16146JCA: RNCC: 5 | RNVC: 2

13 Mar 1984

5975-01-175-0930
Blank Panel

011750930
N111-T3: RNCC: 3 | RNVC: 2
806314 PIECE 309: RNCC: 5 | RNVC: 2

27 Mar 1984

5975-01-195-8078
Junction Box

011958078
74D111251-2053: RNCC: 3 | RNVC: 2

4 Dec 1984

5975-01-196-7580
Electrical Components Tie Down Strap

011967580
TYZ-23M: RNCC: 3 | RNVC: 2
E450562P: RNCC: 5 | RNVC: 2
PLT1M-M76: RNCC: 5 | RNVC: 2
T255-230: RNCC: 5 | RNVC: 2
Z00.N7765110275: RNCC: 5 | RNVC: 9
TYZ-23M: RNCC: 5 | RNVC: 9
13201236-01: RNCC: 5 | RNVC: 9
T255-230: RNCC: 5 | RNVC: 9
EE422-23: RNCC: 7 | RNVC: 2
TYZ-23M: RNCC: C | RNVC: 1

14 Dec 1984

5975-01-197-8398
Electrical Conduit Coupling Nut

011978398
3-87334: RNCC: 3 | RNVC: 2

29 Dec 1984

5975-01-198-9747
Electrical Conduit Ferrule

011989747
65610-02050-104: RNCC: 3 | RNVC: 2

16 Jan 1985

5975-01-205-3607
Junction Box

012053607
A1008CHNFSS: RNCC: 3 | RNVC: 2
C6520-1: RNCC: 5 | RNVC: 1
1414N4PHSSILP: RNCC: 5 | RNVC: 2
AB-1084JHFX: RNCC: 5 | RNVC: 2
E-1008CHNFSS: RNCC: 5 | RNVC: 9
B-1084CHSS: RNCC: 5 | RNVC: 9
1414N4-PHSSILP: RNCC: 5 | RNVC: 9
7P-43100-16: RNCC: C | RNVC: 1

7 Apr 1985

5975-01-225-0460
Electrical-Electronic Equipment Panel

012250460
72-5002: RNCC: 3 | RNVC: 2

26 Jan 1986

5975-01-227-5543
Electrical-Electronic Equipment Chassis

012275543
9311474: RNCC: 3 | RNVC: 2

5 Mar 1986

5975-01-230-5835
Electrical Conduit Adapter

012305835
11831204-2: RNCC: 3 | RNVC: 2
3454-140-55: RNCC: 5 | RNVC: 2
201M914-19B: RNCC: 5 | RNVC: 9

16 Apr 1986

5975-01-231-7445
Electrical Box Connector

012317445
TMC6206: RNCC: 3 | RNVC: 2
TMC6206: RNCC: 3 | RNVC: 9
CGF64: RNCC: 5 | RNVC: 9

3 May 1986

5975-01-231-9549
Conduit Outlet Cover

012319549
4B60037-101A: RNCC: 3 | RNVC: 2
4B60037-101A: RNCC: 5 | RNVC: 2

7 May 1986

5975-01-232-4231
Cable Terminal Chamber

012324231
1222149-2: RNCC: 3 | RNVC: 2
1222149-2: RNCC: 3 | RNVC: 9

13 May 1986

5975-01-236-3283
Electrical Nonmetallic Conduit Assembly

012363283
G134189-1: RNCC: 3 | RNVC: 9
G134189-1: RNCC: 5 | RNVC: 9
G134189-1: RNCC: 5 | RNVC: 9

16 Jul 1986

5975-01-236-9813
Splice Kit

012369813
D-150-0124: RNCC: 3 | RNVC: 2

24 Jul 1986

5975-01-234-0985
Conduit Outlet Cover

012340985
SP41-G: RNCC: 3 | RNVC: 2
18-308-023: RNCC: 5 | RNVC: 9

7 Jun 1986

5975-01-237-1081
Cable Hanger

012371081
B4170: RNCC: 3 | RNVC: 2
B4170: RNCC: 5 | RNVC: 2
78B4170: RNCC: 5 | RNVC: 2
60B4278: RNCC: 5 | RNVC: 9
60B4278: RNCC: 5 | RNVC: 9
5975PL0801058: RNCC: 6 | RNVC: 9

24 Jul 1986

5975-01-242-9017
Flexible Metal Conduit

012429017
419 546 70 31: RNCC: 3 | RNVC: 2
92171: RNCC: 3 | RNVC: 2

18 Oct 1986

5975-01-243-0220
Junction Box

012430220
49-3360: RNCC: 3 | RNVC: 2
6981ED236 PC NO 1: RNCC: 5 | RNVC: 2

21 Oct 1986

5975-01-248-4666
Electrical Components Tie Down Strap

012484666
T5340-0007-001: RNCC: 1 | RNVC: 2
PLC2SS6C: RNCC: 3 | RNVC: 2
PLC2S-S6-8: RNCC: 3 | RNVC: 9
6400188-103: RNCC: 5 | RNVC: 9

23 Jan 1987

5975-01-246-2070
Electrical Conduit Adapter

012462070
150365: RNCC: 3 | RNVC: 2

10 Dec 1986

5975-01-249-6803
Rigid Metal Conduit

012496803
8360440: RNCC: 3 | RNVC: 2

14 Feb 1987

5975-01-250-9395
Flexible Metal Conduit

012509395
309D030-1: RNCC: 3 | RNVC: 2
309D030-1: RNCC: 3 | RNVC: 9
309D030-1: RNCC: 5 | RNVC: 2

9 Mar 1987

5975-01-251-5331
Blank Panel

012515331
A6P4: RNCC: 3 | RNVC: 2
5342PL0958715: RNCC: 6 | RNVC: 9

19 Mar 1987

5975-01-252-6514
Electrical Equipment Rack

012526514
ARP-119: RNCC: 3 | RNVC: 2

5 Apr 1987

5975-01-253-6582
Conduit Chase Nipple

012536582
1663: RNCC: 3 | RNVC: 2
L-702: RNCC: 5 | RNVC: 9

23 Apr 1987

5975-01-255-9579
Flexible Nonmetallic Conduit

012559579
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1004: RNCC: 3 | RNVC: 2
MIL-T-81914/1: RNCC: 5 | RNVC: 9
M81914/1-1004: RNCC: 5 | RNVC: 9

30 May 1987

5975-01-257-3108
Junction Box

012573108
A001 546 54 41: RNCC: 3 | RNVC: 2
AK199H6: RNCC: 5 | RNVC: 2
001 546 54 41: RNCC: 5 | RNVC: 9

17 Jun 1987

5975-01-211-4379
Electrical Nonmetallic Conduit Assembly

012114379
R58HB21B31W036: RNCC: 3 | RNVC: 1
R58HB21B31W036: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 9

26 Jun 1985

5975-01-214-0011
Electrical Equipment Mounting Base

012140011
707597-801: RNCC: 3 | RNVC: 2
MT-6422/ARC-164V: RNCC: 5 | RNVC: 1
68-870080-207: RNCC: 5 | RNVC: 9

4 Aug 1985

5975-01-214-2735
Junction Box

012142735
65560-03150-069: RNCC: 3 | RNVC: 2
65560-03150-060: RNCC: 5 | RNVC: 9

8 Aug 1985

5975-01-214-5746
Electrical Box Connector

012145746
SHC-1015: RNCC: 3 | RNVC: 2
115647158: RNCC: 5 | RNVC: 1
SHC-1015: RNCC: 5 | RNVC: 9

13 Aug 1985

5975-01-216-3401
Flexible Nonmetallic Conduit

012163401
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1210: RNCC: 3 | RNVC: 2
M81914/4-1210: RNCC: 3 | RNVC: 9
AS81914/4: RNCC: 5 | RNVC: 1
M81914/4-1210: RNCC: 5 | RNVC: 9
AMS-T-81914: RNCC: 5 | RNVC: 9
AS81914/4: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
10134299: RNCC: 6 | RNVC: 9

8 Sep 1985

5975-01-218-4407
Electrical Equipment Mounting Base

012184407
123SCAV6025-3: RNCC: 1 | RNVC: 2
684-1: RNCC: 3 | RNVC: 2
684-1: RNCC: 5 | RNVC: 9

11 Oct 1985

5975-01-219-1948
Electrical Conduit Adapter

012191948
K15K0017-2CWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 3 | RNVC: 9
K15K0017-2CWF1: RNCC: 7 | RNVC: 2

23 Oct 1985

5975-01-220-8627
Cable Marker Sleeve

012208627
TMS-3/32-1.50-9: RNCC: 3 | RNVC: 2
TMS 3/32-1.50: RNCC: 5 | RNVC: 9
HS5189-1091: RNCC: 5 | RNVC: 9
HS5189-1091: RNCC: C | RNVC: 1

21 Nov 1985

5975-01-257-3109
Junction Box

012573109
ZT40-80-64-AA: RNCC: 3 | RNVC: 2

17 Jun 1987

5975-01-257-9268
Rigid Metal Conduit Assembly

012579268
68A111216-1003: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-01-258-4339
Rigid Metal Conduit Assembly

012584339
75A602514-1001: RNCC: 3 | RNVC: 2

3 Jul 1987

5975-01-258-8230
Electrical Nonmetallic Conduit Assembly

012588230
R58HB16G42W010A: RNCC: 3 | RNVC: 2
R58HB16G42W010A: RNCC: 5 | RNVC: 2
R58HB16G42W010A: RNCC: 5 | RNVC: 9

8 Jul 1987

5975-01-257-9459
Electrical-Electronic Equipment Panel

012579459
206915: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-01-258-8264
Electrical Equipment Rack

012588264
291-27871-007: RNCC: 3 | RNVC: 2
291-27871-007: RNCC: 5 | RNVC: 9
2635-088-42-ITEM1-48: RNCC: D | RNVC: 9

8 Jul 1987

5975-01-263-3761
Junction Box

012633761
88574-1: RNCC: 3 | RNVC: 2

14 Sep 1987

5975-01-267-7821
Electrical Nonmetallic Conduit Assembly

012677821
R58HB31B31A008: RNCC: 3 | RNVC: 2
R58HB31B31A008: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-01-270-4503
Junction Box

012704503
SP000278-06: RNCC: 3 | RNVC: 2
SP000278-06: RNCC: 3 | RNVC: 9

7 Jan 1988

5975-01-271-3985
Junction Box

012713985
4B69133-127A: RNCC: 3 | RNVC: 2

23 Jan 1988

5975-01-271-3997
Electrical Conduit Ferrule

012713997
1-745130-1: RNCC: 3 | RNVC: 2
A08047: RNCC: 5 | RNVC: 2
1-745130-1: RNCC: 5 | RNVC: 9

23 Jan 1988

5975-01-271-4010
Electrical Box Connector

012714010
FRF6A16-10S-18: RNCC: 3 | RNVC: 2
FRF6A16-10S-18: RNCC: 5 | RNVC: 2

23 Jan 1988

5975-01-271-8041
Electrical Grounding Plate

012718041
9379448: RNCC: 3 | RNVC: 2

30 Jan 1988

5975-01-273-7722
Stuffing Tube

012737722
133.000.230: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-275-8086
Junction Box

012758086
11024118: RNCC: 3 | RNVC: 2

26 Mar 1988

5975-01-280-0478
Cable Spacer

012800478
K55C030-1: RNCC: 3 | RNVC: 2
7022720: RNCC: 3 | RNVC: 2
K55C030-1: RNCC: 5 | RNVC: 9

29 May 1988

5975-01-275-9678
Electrical Conduit Adapter

012759678
5122609-031-107: RNCC: 3 | RNVC: 2
101393: RNCC: 5 | RNVC: 2
5122609-031-107: RNCC: 5 | RNVC: 2

30 Mar 1988

5975-01-282-6254
Electrical Conduit Locknut

012826254
SL2: RNCC: 3 | RNVC: 2
ST41D26-2: RNCC: 5 | RNVC: 9
ST41D26: RNCC: 7 | RNVC: 1
64-2494-0002: RNCC: C | RNVC: 1

19 Jul 1988

5975-01-062-2174
Conduit

010622174
10911021: RNCC: 1 | RNVC: 2
179489-0800: RNCC: 3 | RNVC: 2
W-1297-11: RNCC: 3 | RNVC: 2
17489-0800: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

13 Jul 1978

5975-01-069-4689
Electrical Conduit Coupling

010694689
3697-6: RNCC: 3 | RNVC: 2
3697-6: RNCC: 5 | RNVC: 9

16 Dec 1978

5975-01-068-4074
Electrical Cable Nipple

010684074
12273147-330: RNCC: 1 | RNVC: 2
770-0205-04: RNCC: 3 | RNVC: 2
313F343-8: RNCC: 3 | RNVC: 9
202F232-330: RNCC: 5 | RNVC: 2
313F343-330: RNCC: 5 | RNVC: 2
202F232-50: RNCC: 5 | RNVC: 9
313F343-8: RNCC: 5 | RNVC: 9

25 Nov 1978

5975-01-070-9502
Electrical Cable Protector

010709502
12268801: RNCC: 3 | RNVC: 2

25 Jan 1979

5975-01-077-3851
Electrical-Electronic Equipment Chassis

010773851
637-6414-001: RNCC: 3 | RNVC: 2

23 May 1979

5975-01-078-3542
Electronic Junction Rack

010783542
AS81714: RNCC: 3 | RNVC: 1
M81714/5-4: RNCC: 3 | RNVC: 2
TJT701005: RNCC: 5 | RNVC: 2
M81714/5-4: RNCC: 5 | RNVC: 9
M81714/5-4: RNCC: 5 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 9
MIL-T-81714: RNCC: 5 | RNVC: 9

11 Jun 1979

5975-01-078-9997
Electrical Components Tie Down Strap

010789997
55672-1: RNCC: 1 | RNVC: 2
2829-75-1: RNCC: 3 | RNVC: 2
404-5006-001: RNCC: 5 | RNVC: 1
1914824-1: RNCC: 5 | RNVC: 1
214-1176P1: RNCC: 5 | RNVC: 9

24 Jun 1979

5975-01-085-2780
Electrical Cable Nipple

010852780
1000694-002: RNCC: 3 | RNVC: 2
5975PL0806645: RNCC: 6 | RNVC: 9

5 Nov 1979

5975-01-083-3164
Electrical Cable Nipple

010833164
12273147-320: RNCC: 1 | RNVC: 2
313F343-9: RNCC: 3 | RNVC: 9
13238510-3: RNCC: 5 | RNVC: 2
313F343-9: RNCC: 5 | RNVC: 2
202F232-51-0-CS5326: RNCC: 5 | RNVC: 2
10652587-3: RNCC: 5 | RNVC: 9
202F232-51: RNCC: 5 | RNVC: 9
313F343-9: RNCC: 5 | RNVC: 9
5975010833164: RNCC: 6 | RNVC: 9
12273147: RNCC: D | RNVC: 9

21 Sep 1979

5975-01-089-3711
Electrical Conduit Adapter

010893711
553-908-001-146: RNCC: 3 | RNVC: 2
553-908-001: RNCC: 5 | RNVC: 2
553-908-001-146: RNCC: 5 | RNVC: 2
553-908-001: RNCC: 5 | RNVC: 9

31 Jan 1980

5975-01-102-6982
Electrical Cable Nipple

011026982
12273147-530: RNCC: 1 | RNVC: 2
202F253-50-10: RNCC: 3 | RNVC: 2
202F253-50: RNCC: 5 | RNVC: 9
313F364-8: RNCC: 5 | RNVC: 9
313F364-8: RNCC: C | RNVC: 1

25 Oct 1980

5975-01-103-0396
Junction Box

011030396
V2010A3: RNCC: 3 | RNVC: 2
2010A1: RNCC: 5 | RNVC: 9

3 Nov 1980

5975-01-089-9804
Conduit Outlet

010899804
X50-M: RNCC: 3 | RNVC: 2
X19: RNCC: 5 | RNVC: 2
X17: RNCC: 5 | RNVC: 2
X-50G: RNCC: 5 | RNVC: 9
70-57: RNCC: 5 | RNVC: 9
X17: RNCC: 5 | RNVC: 9

10 Feb 1980

5975-01-079-7927
Ground Rod

010797927
C5001323: RNCC: 3 | RNVC: 2

12 Jul 1979

5975-01-112-6592
Rigid Metal Conduit Assembly

011126592
4B69142-107A: RNCC: 3 | RNVC: 1
4B69142-107A: RNCC: 3 | RNVC: 2
4B69142-107A: RNCC: 5 | RNVC: 2
4B69142-107A: RNCC: 5 | RNVC: 9

8 May 1981

5975-01-112-6597
Rigid Metal Conduit Assembly

011126597
4B69143-121A: RNCC: 3 | RNVC: 2
4B69143-121A: RNCC: 5 | RNVC: 9

8 May 1981

5975-01-112-6599
Rigid Metal Conduit Assembly

011126599
4B69143-127A: RNCC: 3 | RNVC: 2
4B69143-127A: RNCC: 5 | RNVC: 2
4B69143-127A: RNCC: 5 | RNVC: 2
143-127A: RNCC: 5 | RNVC: 9

8 May 1981

5975-01-112-9397
Electrical Components Tie Down Strap

011129397
AL-14-120-MH-9-C: RNCC: 3 | RNVC: 2
RTHM 1400: RNCC: 5 | RNVC: 1
PLC4H-S25-L: RNCC: 5 | RNVC: 1
CT2120005CST: RNCC: 5 | RNVC: 1
PLC4H-S25-L: RNCC: 5 | RNVC: 2
TY537M: RNCC: 5 | RNVC: 2
TY537M: RNCC: 5 | RNVC: 9
TY537M: RNCC: C | RNVC: 1

13 May 1981

5975-01-114-6082
Interconnecting Box

011146082
93D1376-101: RNCC: 3 | RNVC: 2
J-3459/SSQ-82(V): RNCC: 5 | RNVC: 2

19 Jun 1981

5975-01-117-0591
Electrical Cable Protector

011170591
12311871: RNCC: 3 | RNVC: 9
12311871: RNCC: 5 | RNVC: 2
12311871: RNCC: C | RNVC: 1

8 Aug 1981

5975-01-117-0592
Electrical Cable Protector

011170592
12311880: RNCC: 3 | RNVC: 2
12311880: RNCC: 5 | RNVC: 9

8 Aug 1981

5975-01-120-7483
Bushing

011207483
08640-20214: RNCC: 3 | RNVC: 9
08640-20214: RNCC: 5 | RNVC: 9
08640-20214: RNCC: C | RNVC: 1

22 Oct 1981

5975-01-121-0461
Junction Box

011210461
75450-4-A: RNCC: 3 | RNVC: 2
75450-4-A: RNCC: 5 | RNVC: 9
801625-551-003 PC NO 3A: RNCC: C | RNVC: 1

29 Oct 1981

5975-01-121-6958
Electrical-Electronic Equipment Panel

011216958
160D180347-3: RNCC: 3 | RNVC: 2
160D180347-3: RNCC: 5 | RNVC: 9
160D180347-3: RNCC: 5 | RNVC: 9

7 Nov 1981

5975-01-123-8811
Rigid Nonmetallic Conduit

011238811
A52AE12: RNCC: 3 | RNVC: 2
49005: RNCC: 5 | RNVC: 2
49005: RNCC: 5 | RNVC: 2
49005: RNCC: 5 | RNVC: 9
49005-010: RNCC: 5 | RNVC: 9

18 Dec 1981

5975-01-125-8284
Rigid Metal Conduit Assembly

011258284
D014064-1: RNCC: 3 | RNVC: 2
3036AS905: RNCC: 5 | RNVC: 2
D014064-1: RNCC: 5 | RNVC: 9
10134313: RNCC: 6 | RNVC: 9

1 Feb 1982

5975-01-126-7507
Electrical Conduit Adapter

011267507
12311887-5: RNCC: 1 | RNVC: 2
TXR-40-AB00-1206AI: RNCC: 3 | RNVC: 2
52905S6706AIS034-000: RNCC: 5 | RNVC: 2
BAR40AB00-1206A: RNCC: 5 | RNVC: 9

17 Feb 1982

5975-01-128-3867
Electrical Components Tie Down Strap

011283867
647-3259-001: RNCC: 3 | RNVC: 2
647-3259-001: RNCC: 5 | RNVC: 2

20 Mar 1982

5975-01-131-9492
Rigid Nonmetallic Conduit

011319492
49011-010: RNCC: 3 | RNVC: 9
49011: RNCC: 5 | RNVC: 2
49011: RNCC: 5 | RNVC: 2
27522: RNCC: 5 | RNVC: 9
49011: RNCC: 5 | RNVC: 9

19 May 1982

5975-01-134-8286
Electrical Equipment Cabinet

011348286
12299444: RNCC: 3 | RNVC: 2
10387883: RNCC: 6 | RNVC: 9

10 Jul 1982

5975-01-138-2280
Electrical Equipment Mounting Base

011382280
550450-01-01: RNCC: 3 | RNVC: 2

8 Sep 1982

5975-01-155-0136
Electrical Components Tie Down Strap

011550136
8425247: RNCC: 3 | RNVC: 2

4 Jun 1983

5975-01-155-1661
Blank Panel

011551661
74A802614-1005: RNCC: 3 | RNVC: 2
74A802614-1003: RNCC: E | RNVC: 8

6 Jun 1983

5975-01-156-8436
Electrical Components Tie Down Strap

011568436
MS3368-2-0A: RNCC: 2 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
MS3368-2-0A: RNCC: 5 | RNVC: 1
MS3368-2-0A: RNCC: 5 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9

26 Jun 1983

5975-01-158-0358
Electrical Box Connector

011580358
3219: RNCC: 3 | RNVC: 2

15 Jul 1983

5975-01-178-3383
Electrical Equipment Mounting Base

011783383
2602658-001: RNCC: 3 | RNVC: 2
2602658-001: RNCC: 5 | RNVC: 2
2602658-1: RNCC: 5 | RNVC: 9

4 May 1984

5975-01-182-8969
Junction Box Cover

011828969
305-059-403-0: RNCC: 3 | RNVC: 2

30 Jun 1984

5975-01-182-9733
Cable Marker Sleeve

011829733
929149-6: RNCC: 3 | RNVC: 2
929149-6: RNCC: 5 | RNVC: 2
929149-6: RNCC: 5 | RNVC: 2
TMS3/8X: RNCC: 5 | RNVC: 9
TMS 3/8 OX-1.50-9: RNCC: 5 | RNVC: 9
929149-6: RNCC: 5 | RNVC: 9
929149: RNCC: 7 | RNVC: 2

1 Jul 1984

5975-01-186-3477
Electrical Box Connector

011863477
5233AL: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-188-2787
Blank Panel

011882787
880383A00: RNCC: 3 | RNVC: 2
N35-A: RNCC: 5 | RNVC: 9
806292 PIECE 327: RNCC: 5 | RNVC: 9

31 Aug 1984

5975-01-190-2775
Electrical Equipment Mounting Base

011902775
8040004628-1: RNCC: 3 | RNVC: 2
8040004628-1: RNCC: 3 | RNVC: 9

25 Sep 1984

5975-01-192-0724
Electrical Equipment Mounting Base

011920724
8040004172-1: RNCC: 3 | RNVC: 9
8040004172: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-193-6566
Electrical Tie Down Mounting Base

011936566
9454265-2: RNCC: 3 | RNVC: 2
TC-5823: RNCC: 5 | RNVC: 2
9454265: RNCC: D | RNVC: 9

6 Nov 1984

5975-01-164-3740
Electrical Conduit Locknut

011643740
LD482-0049-0004: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-164-3741
Electrical Conduit Locknut

011643741
LD482-0049-0005: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-167-8598
Junction Box Assembly

011678598
70550-02058-043: RNCC: 3 | RNVC: 2

7 Dec 1983

5975-01-170-7325
Stuffing Tube

011707325
900-672-0007: RNCC: 3 | RNVC: 2
CT0437-07: RNCC: 3 | RNVC: 2
P264-0007: RNCC: 3 | RNVC: 2
LE482-0022-0007: RNCC: 7 | RNVC: 2

29 Jan 1984

5975-01-176-5581
Conduit Outlet

011765581
X100-A: RNCC: 3 | RNVC: 2

13 Apr 1984

5975-01-196-9536
Junction Box

011969536
A-845JFGR: RNCC: 3 | RNVC: 2
A-845JFG: RNCC: 5 | RNVC: 9

17 Dec 1984

5975-01-197-8278
Electrical Cable Protector

011978278
12333557: RNCC: 3 | RNVC: 2
BML65477: RNCC: 5 | RNVC: 1

29 Dec 1984

5975-01-200-2764
Electrical Nonmetallic Conduit Assembly

012002764
5188105-125: RNCC: 1 | RNVC: 2
759-192-125: RNCC: 3 | RNVC: 2
5188105-125: RNCC: 3 | RNVC: 2
206125-D10180: RNCC: 3 | RNVC: 2
5188105-125: RNCC: 5 | RNVC: 1
5188105-125: RNCC: 5 | RNVC: 9
206125: RNCC: 5 | RNVC: 9
5975PL0977378: RNCC: 6 | RNVC: 9

1 Feb 1985

5975-01-205-3444
Electrical Conduit Sealing Fitting

012053444
EYS216: RNCC: 3 | RNVC: 2
C11519-2: RNCC: 7 | RNVC: 2

7 Apr 1985

5975-01-204-2833
Electrical Conduit Ferrule

012042833
72-201: RNCC: 3 | RNVC: 9
E-4159-201: RNCC: 7 | RNVC: 2

24 Mar 1985

5975-01-207-0230
Electrical Box Connector

012070230
SHC-1022: RNCC: 3 | RNVC: 9
SHC-1022: RNCC: 5 | RNVC: 2
SHC1022: RNCC: 5 | RNVC: 2
113743A: RNCC: 5 | RNVC: 2
5035882-1: RNCC: 5 | RNVC: 9
113743A: RNCC: 5 | RNVC: 9
SHC-1022: RNCC: 5 | RNVC: 9
04-40174: RNCC: 7 | RNVC: 2

26 Apr 1985

5975-01-208-4788
Junction Box

012084788
1455140: RNCC: 3 | RNVC: 2
1455140: RNCC: 5 | RNVC: 9

15 May 1985

5975-01-209-6774
Electrical Nonmetallic Conduit Assembly

012096774
R58HB12G49W008A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-209-6793
Electrical Nonmetallic Conduit Assembly

012096793
R58HA26B33W036: RNCC: 3 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-210-4431
Electrical Nonmetallic Conduit Assembly

012104431
250941: RNCC: 3 | RNVC: 2

12 Jun 1985

5975-01-223-6316
Electrical Equipment Rack

012236316
03-04294-002: RNCC: 3 | RNVC: 2
03-04294-001: RNCC: 5 | RNVC: 9

4 Jan 1986

5975-01-224-7207
Rigid Metal Conduit Assembly

012247207
5904030-1: RNCC: 3 | RNVC: 2
210568-DI0080: RNCC: 5 | RNVC: 2
5904030-1: RNCC: 5 | RNVC: 9
5904030-1: RNCC: 5 | RNVC: 9

22 Jan 1986

5975-01-225-8018
Conduit Outlet Cover

012258018
5145-0: RNCC: 3 | RNVC: 2
223-V: RNCC: 5 | RNVC: 1
5-4-3622-11: RNCC: 5 | RNVC: 1
5145: RNCC: 5 | RNVC: 9
5-4-3622: RNCC: 5 | RNVC: 9

8 Feb 1986

5975-01-228-9528
Electrical Nonmetallic Conduit Assembly

012289528
R58HB11B31W012A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

22 Mar 1986

5975-01-227-9865
Electrical Nonmetallic Conduit Assembly

012279865
012299865-03219: RNCC: 3 | RNVC: 2
R58HB02B31W024A: RNCC: 3 | RNVC: 9
R58HB02B31W024A: RNCC: 5 | RNVC: 9
K15K0017: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 2

13 Mar 1986

5975-01-229-8648
Electrical Conduit Coupling

012298648
E940K: RNCC: 3 | RNVC: 2
E940K: RNCC: 5 | RNVC: 9
00034481061076: RNCC: 5 | RNVC: 9

6 Apr 1986

5975-01-234-5084
Junction Box Cover

012345084
4-198-1-00193: RNCC: 3 | RNVC: 2
2CC787: RNCC: 5 | RNVC: 2
2CC787: RNCC: 5 | RNVC: 9

14 Jun 1986

5975-01-233-1811
Tube Protector Caps

012331811
3616: RNCC: 3 | RNVC: 2

28 May 1986

5975-01-238-4606
Flexible Metal Conduit

012384606
AS25064: RNCC: 3 | RNVC: 1
MS25064-12: RNCC: 3 | RNVC: 2
AS25064: RNCC: 5 | RNVC: 9
MS25064-12: RNCC: 5 | RNVC: 9
MS25064-12: RNCC: 5 | RNVC: 9

14 Aug 1986

5975-01-239-9875
Electronic Junction Rack

012399875
M81714/5-11: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1

7 Sep 1986

5975-01-241-8880
Electrical Grounding Plate

012418880
3293869-1: RNCC: 3 | RNVC: 2

3 Oct 1986

5975-01-242-6428
Electrical Wall Plate

012426428
WP2: RNCC: 3 | RNVC: 2
WP-2: RNCC: 5 | RNVC: 9

15 Oct 1986

5975-01-249-1467
Electrical Components Tie Down Strap

012491467
MS3368-1-8A: RNCC: 2 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9

6 Feb 1987

5975-01-249-3411
Stuffing Tube Packing Nut

012493411
M24235/1-021: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

10 Feb 1987

5975-01-250-2196
Cable Strain Relief Bushing

012502196
1200: RNCC: 3 | RNVC: 2

26 Feb 1987

5975-01-210-5444
Electrical Conduit Adapter

012105444
J15K0012-1: RNCC: 3 | RNVC: 2
J15K0012-1: RNCC: 5 | RNVC: 9

14 Jun 1985

5975-01-210-8109
Electrical Nonmetallic Conduit Assembly

012108109
R58HB16H42W024A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-213-3861
Electrical Grounding Plate

012133861
642-1210-001: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-01-213-7379
Flexible Metal Conduit

012137379
750-084-12: RNCC: 3 | RNVC: 2
023700-HP-375: RNCC: 3 | RNVC: 2
SM83-03: RNCC: 5 | RNVC: 2
MHT-38-31-P: RNCC: 5 | RNVC: 2
71350-38-31: RNCC: 5 | RNVC: 9
SM83-03: RNCC: 5 | RNVC: 9

29 Jul 1985

5975-01-213-2865
Electrical Equipment Mounting Base

012132865
2488354: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-01-214-1360
Flexible Metal Conduit

012141360
750-084-80: RNCC: 3 | RNVC: 2
71350-250-31: RNCC: 5 | RNVC: 2
SM83-20: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-214-3511
Electrical Nonmetallic Conduit Assembly

012143511
R58HB31B34X030: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

9 Aug 1985

5975-01-214-3506
Electrical Nonmetallic Conduit Assembly

012143506
R58HB16D33W006A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

9 Aug 1985

5975-01-215-6770
Electrical Equipment Mounting Base

012156770
16F4655-11: RNCC: 3 | RNVC: 2

29 Aug 1985

5975-01-216-7068
Cable Marker Sleeve

012167068
9317987-4: RNCC: 1 | RNVC: 2
TMS-1/2-1.50-9: RNCC: 3 | RNVC: 2
929149-5: RNCC: 5 | RNVC: 1
HS5189-1501: RNCC: 5 | RNVC: 2
TMS-1/2-1.50: RNCC: 5 | RNVC: 9
HS5189-1501: RNCC: 5 | RNVC: 9
929149-5: RNCC: 5 | RNVC: 9
TMS.500: RNCC: C | RNVC: 1
HS127WE1NF044B: RNCC: C | RNVC: 1

15 Sep 1985

5975-01-257-9067
Junction Box

012579067
31834: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-01-257-3110
Junction Box Cover

012573110
169845-1: RNCC: 3 | RNVC: 2

17 Jun 1987

5975-01-221-1432
Cable Hanger

012211432
1716084 PIECE 20: RNCC: 3 | RNVC: 2
8500-424 PIECE 20: RNCC: 5 | RNVC: 1
1716084: RNCC: D | RNVC: 9

23 Nov 1985

5975-01-261-2576
Electrical Components Tie Down Strap

012612576
TY52315M: RNCC: 3 | RNVC: 2
TYB2315M: RNCC: 5 | RNVC: 1
TYB2315M: RNCC: 5 | RNVC: 2
91575698: RNCC: 5 | RNVC: 2
TY52315M: RNCC: 5 | RNVC: 2
TY52315M: RNCC: 5 | RNVC: 9
TYB2315M: RNCC: 5 | RNVC: 9

11 Aug 1987

5975-01-261-2443
Electrical Nonmetallic Conduit Assembly

012612443
252855: RNCC: 3 | RNVC: 1
R58HB16H42W010A: RNCC: 5 | RNVC: 1
R58HB16H42W010A: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

11 Aug 1987

5975-01-261-4820
Blank Panel

012614820
9M381B7E: RNCC: 3 | RNVC: 2
10129590: RNCC: 6 | RNVC: 9

14 Aug 1987

5975-01-263-1365
Ground Rod Assembly

012631365
425627-1: RNCC: 3 | RNVC: 2

9 Sep 1987

5975-01-268-4529
Electrical Equipment Rack

012684529
4007158-0509: RNCC: 3 | RNVC: 2
4007158-0509: RNCC: 5 | RNVC: 9

1 Dec 1987

5975-01-269-8421
Electrical Equipment Mounting Base

012698421
2635-088-22 ITEM 1-216: RNCC: 3 | RNVC: 2
291-27871-023: RNCC: 5 | RNVC: 2

23 Dec 1987

5975-01-269-7884
Electrical Equipment Mounting Base

012697884
622-8727-001: RNCC: 3 | RNVC: 2
622-8727-001: RNCC: 3 | RNVC: 2
622-8727-001: RNCC: 5 | RNVC: 2

22 Dec 1987

5975-01-269-9620
Electrical Conduit Coupling Nut Clamp

012699620
5893921: RNCC: 3 | RNVC: 2

24 Dec 1987

5975-01-271-4052
Electrical Conduit Locknut

012714052
1206: RNCC: 3 | RNVC: 2
BLSG150: RNCC: 3 | RNVC: 2
145SL: RNCC: 5 | RNVC: 2
P-304-S: RNCC: 5 | RNVC: 9
145: RNCC: 5 | RNVC: 9
SLG-105S: RNCC: 5 | RNVC: 9

23 Jan 1988

5975-01-273-3798
Electrical Box Connector

012733798
3210: RNCC: 3 | RNVC: 2

25 Feb 1988

5975-01-274-7775
Electrical Wall Plate

012747775
80401: RNCC: 3 | RNVC: 9

13 Mar 1988

5975-01-280-3413
Cable Marker Sleeve

012803413
5893932: RNCC: 3 | RNVC: 2

8 Jun 1988

5975-01-282-5466
Cable Spacer

012825466
6532B876: RNCC: 3 | RNVC: 1
6532B876-1: RNCC: 3 | RNVC: 2
6532B876-1: RNCC: 3 | RNVC: 2
6532B876-1: RNCC: 5 | RNVC: 2
PS4816: RNCC: 5 | RNVC: 9
6532B876: RNCC: 5 | RNVC: 9

17 Jul 1988

5975-01-282-8796
Electrical Box Connector

012828796
CG87125: RNCC: 3 | RNVC: 2

24 Jul 1988

5975-01-120-8741
Electrical Components Tie Down Strap

011208741
12283353: RNCC: 1 | RNVC: 2
TY-35M: RNCC: 3 | RNVC: 2
12283353: RNCC: 5 | RNVC: 2
12283353: RNCC: 5 | RNVC: 9

25 Oct 1981

5975-01-217-1581
Electrical Equipment Mounting Base

012171581
622-7377-001: RNCC: 3 | RNVC: 2

22 Sep 1985

5975-01-257-3116
Electrical Components Tie Down Strap

012573116
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-2-7: RNCC: 3 | RNVC: 2
MS3367-2-7: RNCC: 3 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 1
AS33671: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 9
MS3367-2-7: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9

17 Jun 1987

5975-01-144-2329
Electronic Junction Rack

011442329
CTJ-3A-06-4021: RNCC: 3 | RNVC: 2

16 Dec 1982

5975-01-147-0325
Electrical Conduit Bend

011470325
12267098-1: RNCC: 3 | RNVC: 2

9 Feb 1983

5975-01-259-9211
Electrical Cable Assembly Protector

012599211
405-10661-1: RNCC: 3 | RNVC: 2

23 Jul 1987

5975-01-069-2196
Electrical Box Connector

010692196
2573: RNCC: 3 | RNVC: 2

10 Dec 1978

5975-01-069-8930
Electrical Conduit Coupling

010698930
3697-9: RNCC: 3 | RNVC: 2
3697-9: RNCC: 5 | RNVC: 9

28 Dec 1978

5975-01-072-3317
Electrical Equipment Mounting Base

010723317
23408-1: RNCC: 3 | RNVC: 2

28 Feb 1979

5975-01-073-3393
Support Conduit

010733393
4B69154-102A: RNCC: 3 | RNVC: 2

15 Mar 1979

5975-01-073-3392
Support Conduit

010733392
4B69154-101A: RNCC: 3 | RNVC: 2

15 Mar 1979

5975-01-065-1740
Metallic Raceway

010651740
281620-002: RNCC: 3 | RNVC: 2
281620-0002: RNCC: 5 | RNVC: 9
281620-002: RNCC: 5 | RNVC: 9

10 Sep 1978

5975-01-074-5467
Electrical Conduit Adapter

010745467
E942F: RNCC: 3 | RNVC: 2
E942F: RNCC: 5 | RNVC: 9
00034481062431: RNCC: 5 | RNVC: 9

3 Apr 1979

5975-01-081-9313
Marker Tie

010819313
PLM1M: RNCC: 3 | RNVC: 2
832224992494: RNCC: 5 | RNVC: 2

23 Aug 1979

5975-01-083-1879
Electrical Box Connector

010831879
C-750: RNCC: 3 | RNVC: 2
C-750: RNCC: 5 | RNVC: 9
5HB99: RNCC: C | RNVC: 1
6701510: RNCC: C | RNVC: 1

19 Sep 1979

5975-01-085-0654
Junction Box Cover

010850654
ZT56-144B-COG-BB: RNCC: 3 | RNVC: 2
M129-58: RNCC: 5 | RNVC: 2
M129-58: RNCC: 5 | RNVC: 9
ZT56-144B-COG-BB: RNCC: 5 | RNVC: 9

30 Oct 1979

5975-01-088-6004
Electrical Conduit Coupling

010886004
AA50553-1-1-K-1-01-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
AA50553-I-2-K-01: RNCC: 5 | RNVC: 9
11612072: RNCC: 5 | RNVC: 9

16 Jan 1980

5975-01-093-1580
Conduit Outlet

010931580
CPS12021: RNCC: 3 | RNVC: 2

10 Apr 1980

5975-01-098-8572
Electrical Box Connector

010988572
CGB192-SG: RNCC: 3 | RNVC: 2
WF406: RNCC: 5 | RNVC: 9

8 Aug 1980

5975-01-104-1099
Conduit Outlet Cover

011041099
DS24G: RNCC: 3 | RNVC: 2

27 Nov 1980

5975-01-108-5156
Cable Clamp

011085156
648R236G04: RNCC: 3 | RNVC: 2
648R236G04: RNCC: 3 | RNVC: 9
648R236G04: RNCC: 5 | RNVC: 2
648R236G04: RNCC: 5 | RNVC: 9

1 Mar 1981

5975-01-110-2237
Electrical Equipment Rack

011102237
16878: RNCC: 3 | RNVC: 2

28 Mar 1981

5975-01-113-8824
Electrical Box Connector

011138824
2673: RNCC: 3 | RNVC: 2

6 Jun 1981

5975-01-116-4472
Electrical-Electronic Equipment Chassis

011164472
484419-1-1: RNCC: 3 | RNVC: 2

26 Jul 1981

5975-01-116-1746
Rigid Metal Conduit Assembly

011161746
4B69142-109A: RNCC: 3 | RNVC: 2
4B69142-109A: RNCC: 5 | RNVC: 2
4B69142-109A: RNCC: 5 | RNVC: 9
4B69142-109A: RNCC: 5 | RNVC: 9

22 Jul 1981

5975-01-117-9490
Stuffing Tube

011179490
CT0904-05A: RNCC: 3 | RNVC: 2
74B878001-129: RNCC: 5 | RNVC: 2

24 Aug 1981

5975-01-119-9337
Electrical Conduit Coupling

011199337
RP2200-EM06: RNCC: 3 | RNVC: 2
S82200-S06: RNCC: 3 | RNVC: 2
RP2200-F06: RNCC: 5 | RNVC: 2
RP2200-F06: RNCC: 5 | RNVC: 9
RP2200-F06: RNCC: 5 | RNVC: 9
RP2200-F06: RNCC: 5 | RNVC: 9
S82200-S06: RNCC: 5 | RNVC: 9
S82200-F06: RNCC: 5 | RNVC: 9

8 Oct 1981

5975-01-120-1088
Electrical Components Tie Down Strap

011201088
PRT12EH-C0: RNCC: 3 | RNVC: 2
RT250XL0X2: RNCC: 3 | RNVC: 2

11 Oct 1981

5975-01-125-8268
Electrical Conductor Bushing

011258268
74B878001-145: RNCC: 1 | RNVC: 2
CT0905-145: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-125-2807
Wiring Conduit

011252807
3036AS1350: RNCC: 3 | RNVC: 2
J014073-1: RNCC: 3 | RNVC: 9
J014073-1: RNCC: 5 | RNVC: 9
J014073-1: RNCC: 5 | RNVC: 9

25 Jan 1982

5975-01-127-2429
Electrical Cable Protector

011272429
13010048-1: RNCC: 3 | RNVC: 2
13010048: RNCC: D | RNVC: 9

27 Feb 1982

5975-01-127-7590
Electrical Conduit Adapter

011277590
CRN3444-06: RNCC: 3 | RNVC: 2
31A00003L10C09: RNCC: 5 | RNVC: 2
710FS137D06A3: RNCC: 5 | RNVC: 2
S3195-0602-8W: RNCC: 5 | RNVC: 2
ST5M1331L10C09: RNCC: 5 | RNVC: 9
10134286: RNCC: 6 | RNVC: 9

7 Mar 1982

5975-01-130-8500
Electrical-Electronic Equipment Chassis

011308500
659-0989-006: RNCC: 3 | RNVC: 2
641-4348-006: RNCC: 5 | RNVC: 9

29 Apr 1982

5975-01-130-8501
Electrical-Electronic Equipment Chassis

011308501
659-0989-007: RNCC: 3 | RNVC: 2
641-4348-007: RNCC: 5 | RNVC: 9

29 Apr 1982

5975-01-132-7065
Rigid Metal Conduit Assembly

011327065
C223R-0375-1402-L6L8KC: RNCC: 3 | RNVC: 2

3 Jun 1982

5975-01-139-3600
Conduit Outlet Cover

011393600
11685911: RNCC: 3 | RNVC: 2

30 Sep 1982

5975-01-139-3599
Conduit Outlet Cover

011393599
11685904: RNCC: 3 | RNVC: 2

30 Sep 1982

5975-01-139-3405
Cable Marker Sleeve

011393405
TMS-SCE-1-2.0-9: RNCC: 3 | RNVC: 1
ECS6036J9: RNCC: 5 | RNVC: 2
215511T86: RNCC: 5 | RNVC: 9
RNF-100-1X2 WHITE: RNCC: 5 | RNVC: 9
215511T86: RNCC: 5 | RNVC: 9
215511T: RNCC: 5 | RNVC: 9
7381985-9: RNCC: 7 | RNVC: 2

29 Sep 1982

5975-01-140-9228
Electrical Tie Down Mounting Base

011409228
ABM4H-A-L: RNCC: 3 | RNVC: 2
FTH-10A: RNCC: 5 | RNVC: 9
ABM4S-A: RNCC: 5 | RNVC: 9
ABM4S-A-L: RNCC: 5 | RNVC: 9

20 Oct 1982

5975-01-149-8449
Switch Box Case

011498449
58313-40779: RNCC: 3 | RNVC: 2
58313-40779: RNCC: 3 | RNVC: 9

27 Mar 1983

5975-01-150-0629
Cable Spacer

011500629
12273328: RNCC: 3 | RNVC: 2

29 Mar 1983

5975-01-151-4988
Electrical-Electronic Equipment Chassis

011514988
25-75965-3: RNCC: 3 | RNVC: 2

18 Apr 1983

5975-01-151-3300
Conduit Outlet

011513300
2247880: RNCC: 3 | RNVC: 2
2BC237: RNCC: 5 | RNVC: 9
45B009: RNCC: 5 | RNVC: 9
2AN860: RNCC: 5 | RNVC: 9
2247880: RNCC: 5 | RNVC: 9

16 Apr 1983

5975-01-151-6517
Electrical Conduit Bend

011516517
UA9AD: RNCC: 3 | RNVC: 2
UA9AD: RNCC: 3 | RNVC: 9
59588: RNCC: 5 | RNVC: 9
00034481060413: RNCC: 5 | RNVC: 9

20 Apr 1983

5975-01-151-7033
Electrical Conduit Coupling Nut

011517033
7716634-1: RNCC: 3 | RNVC: 2

21 Apr 1983

5975-01-152-8058
Interconnecting Box

011528058
815-1853010 PIECE 50: RNCC: 3 | RNVC: 1
62077-034: RNCC: 3 | RNVC: 2
815-1853010 PIECE 50: RNCC: 5 | RNVC: 9
815-1853010 PIECE 50: RNCC: 5 | RNVC: 9
702005-794: RNCC: 5 | RNVC: 9
702005-794: RNCC: C | RNVC: 1

8 May 1983

5975-01-152-8617
Electrical-Electronic Equipment Chassis

011528617
928390-1: RNCC: 3 | RNVC: 2
928390-1: RNCC: 5 | RNVC: 2
928390-1: RNCC: 5 | RNVC: 9

10 May 1983

5975-01-156-6648
Electrical Components Tie Down Strap

011566648
ST2669-07: RNCC: 1 | RNVC: 2
4076700: RNCC: 3 | RNVC: 2
TYZ-27M: RNCC: 5 | RNVC: 2
5975PL1390576: RNCC: 6 | RNVC: 9
5975PL1739951: RNCC: 6 | RNVC: 9

23 Jun 1983

5975-01-182-2363
Electrical Equipment Mounting Base

011822363
218118118: RNCC: 3 | RNVC: 2
2650-1940-56: RNCC: 5 | RNVC: 2
501-5952017 ITEM 1-2: RNCC: 5 | RNVC: 2
CD2650-2268: RNCC: 5 | RNVC: 9
2650-1940-56: RNCC: 5 | RNVC: 9
CD2650-2268: RNCC: 5 | RNVC: 9
2650-1940-56: RNCC: 5 | RNVC: 9

22 Jun 1984

5975-01-183-2075
Radio Cradle Assy

011832075
A3-06-0916: RNCC: 3 | RNVC: 2
A3-06-0916: RNCC: 5 | RNVC: 2

3 Jul 1984

5975-01-189-8540
Electrical-Electronic Equipment Chassis

011898540
937E775G1: RNCC: 3 | RNVC: 2

20 Sep 1984

5975-01-190-5417
Electrical Components Tie Down Strap

011905417
PLT2M-M0: RNCC: 3 | RNVC: 2
TY232MX: RNCC: 5 | RNVC: 2
696-40968-5: RNCC: 5 | RNVC: 9
PLT2M-M390: RNCC: 5 | RNVC: 9
PLT-2M-CP: RNCC: E | RNVC: 8

27 Sep 1984

5975-01-162-4487
Cable Strain Relief Bushing

011624487
96-24085-0: RNCC: 3 | RNVC: 2
040-99012: RNCC: 5 | RNVC: 1
2AA648: RNCC: 5 | RNVC: 2
24085: RNCC: 5 | RNVC: 9

18 Sep 1983

5975-01-158-4634
Junction Box

011584634
2249470: RNCC: 3 | RNVC: 2
2BD720: RNCC: 5 | RNVC: 9
2249470: RNCC: 5 | RNVC: 9
458008-P1: RNCC: 5 | RNVC: 9

23 Jul 1983

5975-01-164-1059
Electrical Components Tie Down Strap

011641059
320107: RNCC: 3 | RNVC: 1
137852: RNCC: 3 | RNVC: 2
ZB0320107: RNCC: 5 | RNVC: 2
E/NSC160/OMC: RNCC: 5 | RNVC: 2
PLT2SC0: RNCC: 5 | RNVC: 2
38780-000: RNCC: 5 | RNVC: 2
320107: RNCC: 5 | RNVC: 9
137852: RNCC: 5 | RNVC: 9
320107: RNCC: 5 | RNVC: 9
320107: RNCC: 5 | RNVC: 9

12 Oct 1983

5975-01-164-4711
Junction Box

011644711
180-1/2: RNCC: 3 | RNVC: 2
68361-1/2: RNCC: 5 | RNVC: 2
105: RNCC: 5 | RNVC: 9

17 Oct 1983

5975-01-172-2330
Flexible Nonmetallic Conduit

011722330
M81914/2-1003: RNCC: 3 | RNVC: 2
SAE-AS81914: RNCC: 5 | RNVC: 1
SAE-AS81914/1: RNCC: 5 | RNVC: 9
M81914/1-1003: RNCC: 5 | RNVC: 9
MIL-T-81914/1: RNCC: 5 | RNVC: 9
AMS-T-81914/1: RNCC: 5 | RNVC: 9
M81914/1-1003: RNCC: 5 | RNVC: 9
AMS-T-81914/1: RNCC: 5 | RNVC: 9
M81914/1-1003: RNCC: 5 | RNVC: 9

16 Feb 1984

5975-01-172-5379
Flexible Nonmetallic Conduit

011725379
LCP-750: RNCC: 3 | RNVC: 2

22 Feb 1984

5975-01-174-3647
Junction Box

011743647
A20H1610SSLP: RNCC: 3 | RNVC: 2

16 Mar 1984

5975-01-175-0866
Cover

011750866
701000-677: RNCC: 3 | RNVC: 2
701000-677: RNCC: 5 | RNVC: 9

27 Mar 1984

5975-01-175-0928
Blank Panel

011750928
N111-T2: RNCC: 3 | RNVC: 2
806314 PIECE 304: RNCC: 5 | RNVC: 2

27 Mar 1984

5975-01-174-9375
Junction Box

011749375
AB-14126JCA: RNCC: 3 | RNVC: 2
A1412NFAL: RNCC: 3 | RNVC: 2
E-1412NFAL: RNCC: 5 | RNVC: 9

24 Mar 1984

5975-01-176-5582
Conduit Outlet

011765582
T125-A: RNCC: 3 | RNVC: 2
033701-0001: RNCC: 5 | RNVC: 2

13 Apr 1984

5975-01-176-6871
Electrical Box Connector

011766871
91701169N: RNCC: 3 | RNVC: 9
91701169: RNCC: 5 | RNVC: 9
91701169N: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-196-5713
Cable Marker Sleeve

011965713
708406-3: RNCC: 3 | RNVC: 2
708406-3: RNCC: 7 | RNVC: 2

12 Dec 1984

5975-01-201-5497
Electrical Grounding Plate

012015497
10341-001: RNCC: 3 | RNVC: 9

20 Feb 1985

5975-01-207-9298
Electrical Cable Protector

012079298
L5416088-003: RNCC: 3 | RNVC: 2

7 May 1985

5975-01-209-6791
Electrical Nonmetallic Conduit Assembly

012096791
R58HA10D34W008: RNCC: 3 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-225-6338
Electrical Nonmetallic Conduit Assembly

012256338
910243: RNCC: 3 | RNVC: 2

5 Feb 1986

5975-01-228-7140
Electrical Nonmetallic Conduit Assembly

012287140
R58HB31B34W015: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

20 Mar 1986

5975-01-229-2838
Electrical Conduit Bushing

012292838
8-140-021-09: RNCC: 3 | RNVC: 2
N-322-D PIECE 50: RNCC: 5 | RNVC: 9

29 Mar 1986

5975-01-231-7441
Electrical Box Connector

012317441
SHC-1023-CR: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-235-5111
Electrical Equipment Mounting Base

012355111
622-6380-001: RNCC: 3 | RNVC: 2
MT-6313/ARN-147(V): RNCC: 5 | RNVC: 2

1 Jul 1986

5975-01-236-2902
Electrical Box Connector

012362902
DB638: RNCC: 3 | RNVC: 2
SHC-1032: RNCC: 3 | RNVC: 2
CJ0445-001: RNCC: 5 | RNVC: 2
65087AX: RNCC: 5 | RNVC: 2
65087AX: RNCC: 7 | RNVC: 9

15 Jul 1986

Load More Results