What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 95 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 95 of 176

5975-01-111-0130
Electrical Tie Down Mounting Base

011110130
PBMSH25: RNCC: 3 | RNVC: 2
0312130750: RNCC: 5 | RNVC: 2
PBMS-H25: RNCC: 5 | RNVC: 2
998/4/83942/000: RNCC: 5 | RNVC: 2
505550-1: RNCC: 7 | RNVC: 2

9 Apr 1981

5975-01-112-2151
Oil Return Junction

011122151
5136519: RNCC: 3 | RNVC: 2
PC5136519: RNCC: 5 | RNVC: 9

30 Apr 1981

5975-01-112-6607
Rigid Metal Conduit Assembly

011126607
4B69142-131A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6611
Rigid Metal Conduit Assembly

011126611
4B69142-111A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-115-1314
Rigid Metal Conduit Assembly

011151314
4B69142-139A: RNCC: 3 | RNVC: 2

28 Jun 1981

5975-01-116-0285
Electrical Cable Nipple

011160285
12273176-320: RNCC: 1 | RNVC: 2
222F232-51: RNCC: 3 | RNVC: 2
333F343-9: RNCC: 3 | RNVC: 2
333F343-9: RNCC: 5 | RNVC: 9

18 Jul 1981

5975-01-116-5459
Flexible Metal Conduit

011165459
HC3/4IN SIZE: RNCC: 3 | RNVC: 2
AT 12: RNCC: 3 | RNVC: 2
00415-0054: RNCC: 5 | RNVC: 2
AT 1412: RNCC: 5 | RNVC: 9
00415-0054: RNCC: 5 | RNVC: 9

29 Jul 1981

5975-01-117-3266
Electrical Conduit Elbow

011173266
12311902-9: RNCC: 1 | RNVC: 2
202M022-19B: RNCC: 3 | RNVC: 2
10351624: RNCC: 5 | RNVC: 2
X21-572-624: RNCC: 5 | RNVC: 2
10351624: RNCC: 5 | RNVC: 9
X21-572-624: RNCC: 5 | RNVC: 9
10351624: RNCC: 5 | RNVC: 9
X21-572-624: RNCC: 5 | RNVC: 9

13 Aug 1981

5975-01-118-6759
Electrical Conduit Adapter

011186759
RP2440-06-N: RNCC: 3 | RNVC: 2
RP2440-06-N: RNCC: 5 | RNVC: 2
RP2440-06-1: RNCC: 5 | RNVC: 9

9 Sep 1981

5975-01-120-3728
Rigid Metal Conduit

011203728
11677578: RNCC: 3 | RNVC: 2

18 Oct 1981

5975-01-121-0744
Cable Tie

011210744
15385: RNCC: 3 | RNVC: 2
15385: RNCC: 5 | RNVC: 9
15385: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-035-5120
Electrical Cable Protector

010355120
30/24: RNCC: 3 | RNVC: 9
M24705: RNCC: 4 | RNVC: 1
30/24: RNCC: 5 | RNVC: 9

11 Feb 1977

5975-01-125-6688
Electrical Box Connector

011256688
CG-5050: RNCC: 3 | RNVC: 2
56646-8: RNCC: 5 | RNVC: 2
13229E6555-2: RNCC: 7 | RNVC: 2

1 Feb 1982

5975-01-127-5988
Fanning Strip

011275988
74A885647-2001: RNCC: 3 | RNVC: 2
74A885647-2001: RNCC: 5 | RNVC: 2

4 Mar 1982

5975-01-130-3163
Interconnecting Box

011303163
65560-05127-041: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-131-9485
Electrical Conduit Adapter

011319485
E942J: RNCC: 3 | RNVC: 9
00034481062462: RNCC: 5 | RNVC: 9

19 May 1982

5975-01-131-6300
Cable Hanger

011316300
12308204: RNCC: 1 | RNVC: 2
CL-09-KR: RNCC: 3 | RNVC: 2

13 May 1982

5975-01-133-8441
Cable Hanger

011338441
12307412: RNCC: 3 | RNVC: 2

22 Jun 1982

5975-01-137-5367
Electrical Tie Down Mounting Base

011375367
ABM2S-A-C15: RNCC: 3 | RNVC: 2

28 Aug 1982

5975-01-142-1001
Electrical Operator

011421001
10250T5: RNCC: 3 | RNVC: 9

10 Nov 1982

5975-01-144-9401
Electrical Conduit Coupling

011449401
E940H: RNCC: 3 | RNVC: 9
00034481061052: RNCC: 5 | RNVC: 9

31 Dec 1982

5975-01-142-2927
Electrical Conduit Bend

011422927
ANSI/UL797: RNCC: 3 | RNVC: 1
12267094: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-149-1373
Electrical Nonmetallic Conduit Assembly

011491373
4B69143-133A: RNCC: 3 | RNVC: 2

15 Mar 1983

5975-01-151-1750
Electrical Conduit Bend

011511750
59592: RNCC: 3 | RNVC: 2
UA9AH: RNCC: 5 | RNVC: 9
00034481060451: RNCC: 5 | RNVC: 9

14 Apr 1983

5975-01-151-1751
Electrical Conduit Bend

011511751
UA9AJ: RNCC: 3 | RNVC: 9
59593: RNCC: 5 | RNVC: 2
00034481060468: RNCC: 5 | RNVC: 9

14 Apr 1983

5975-01-151-9336
Electrical Box Connector

011519336
073-03-1201: RNCC: 3 | RNVC: 2

25 Apr 1983

5975-01-155-6203
Electrical-Electronic Equipment Chassis

011556203
73-25189-001: RNCC: 3 | RNVC: 2
PTC2145121B-L: RNCC: 5 | RNVC: 2

13 Jun 1983

5975-01-158-4636
Junction Box

011584636
2BD724: RNCC: 3 | RNVC: 2
2BD724: RNCC: 5 | RNVC: 9
45B007-P1: RNCC: 5 | RNVC: 9

23 Jul 1983

5975-01-158-5094
Cable Pressure Pad

011585094
RE-B102121-5: RNCC: 3 | RNVC: 2
RE-B102121-5: RNCC: 5 | RNVC: 2
ASC1540040: RNCC: 5 | RNVC: 9

25 Jul 1983

5975-01-158-5093
Cable Pressure Pad

011585093
RE-B102121-4: RNCC: 3 | RNVC: 2
ASC1539991: RNCC: 5 | RNVC: 9
RE-B102121: RNCC: D | RNVC: 9

25 Jul 1983

5975-01-177-9335
Junction Box Cover

011779335
70550-22130-105: RNCC: 3 | RNVC: 2

29 Apr 1984

5975-01-177-9346
Electrical Cable Nipple

011779346
51-0296-3: RNCC: 3 | RNVC: 2

29 Apr 1984

5975-01-181-5679
Electrical Conduit Adapter

011815679
K15K0017-2DWF1: RNCC: 3 | RNVC: 2
150190: RNCC: 5 | RNVC: 1

12 Jun 1984

5975-01-182-7689
Electrical Conduit Union

011827689
EC-100: RNCC: 3 | RNVC: 2
EC-100: RNCC: 3 | RNVC: 9

27 Jun 1984

5975-01-188-2786
Blank Panel

011882786
806292 PIECE 306: RNCC: 3 | RNVC: 2
N18-T3: RNCC: 5 | RNVC: 2

31 Aug 1984

5975-01-163-1123
Cable Clamp

011631123
FCC-2: RNCC: 3 | RNVC: 2
828-2810222-002: RNCC: 5 | RNVC: 2
788437-1: RNCC: C | RNVC: 1

28 Sep 1983

5975-01-167-3934
Electrical Wall Plate

011673934
224-VAL: RNCC: 3 | RNVC: 2

27 Nov 1983

5975-01-172-8378
Clamp

011728378
WH1X1292: RNCC: 3 | RNVC: 2

25 Feb 1984

5975-01-174-3065
Electrical Equipment Mounting Base

011743065
166763-01: RNCC: 3 | RNVC: 2
94086-1: RNCC: 5 | RNVC: 9
94086-1: RNCC: 5 | RNVC: 9

16 Mar 1984

5975-01-174-0584
Conduit Outlet

011740584
35CB3000: RNCC: 3 | RNVC: 9
35-7500: RNCC: 5 | RNVC: 9
00781568162545: RNCC: 5 | RNVC: 9
00781568162545: RNCC: C | RNVC: 1
35CB3000: RNCC: C | RNVC: 1

14 Mar 1984

5975-01-176-0145
Electrical Cable Nipple

011760145
42HA0603: RNCC: 3 | RNVC: 2

6 Apr 1984

5975-01-176-5579
Conduit Outlet

011765579
LB50-A: RNCC: 3 | RNVC: 2
OLB-1: RNCC: 5 | RNVC: 2
LB-50A: RNCC: 5 | RNVC: 9

13 Apr 1984

5975-01-195-9884
Blank Panel

011959884
BACP10U0150B: RNCC: 3 | RNVC: 2

5 Dec 1984

5975-01-197-1923
Electrical Equipment Mounting Base

011971923
622-4290-002: RNCC: 3 | RNVC: 2

19 Dec 1984

5975-01-198-3811
Flexible Metal Conduit

011983811
600232-4/12: RNCC: 3 | RNVC: 2
600232-4: RNCC: 5 | RNVC: 9
FF-9119: RNCC: 5 | RNVC: 9
5975PL0924600: RNCC: 6 | RNVC: 9
FF-9119 PIECE 3: RNCC: 7 | RNVC: 2

8 Jan 1985

5975-01-201-4108
Rigid Metal Conduit

012014108
6-013-000458: RNCC: 3 | RNVC: 9
2CD604: RNCC: 5 | RNVC: 2
6-013-000458: RNCC: 5 | RNVC: 2
6-013-000458: RNCC: 5 | RNVC: 9
2CD604: RNCC: 5 | RNVC: 9

16 Feb 1985

5975-01-204-2832
Electrical Conduit Ferrule

012042832
72-261: RNCC: 3 | RNVC: 9
E-4159-261: RNCC: 7 | RNVC: 2

24 Mar 1985

5975-01-205-3769
Electrical Components Tie Down Strap

012053769
T18I0M4: RNCC: 3 | RNVC: 2
T18I0C2: RNCC: 3 | RNVC: 2
PLT1.5M-C0: RNCC: 3 | RNVC: 2
7-850-000208: RNCC: 5 | RNVC: 1
7-850-000208: RNCC: 5 | RNVC: 1
PLT1.5M-M0: RNCC: 5 | RNVC: 1
AL06-18-0-C: RNCC: 5 | RNVC: 2
2HA859: RNCC: 5 | RNVC: 2
AL-06-18-0-C: RNCC: 5 | RNVC: 9
2HA859: RNCC: 5 | RNVC: 9

7 Apr 1985

5975-01-206-0968
Blank Panel

012060968
A16P14: RNCC: 3 | RNVC: 2

13 Apr 1985

5975-01-207-6309
Junction Box Assembly

012076309
2-198-1-00083: RNCC: 3 | RNVC: 2
2CT98: RNCC: 5 | RNVC: 2
2CT98: RNCC: 5 | RNVC: 9

3 May 1985

5975-01-207-0229
Electrical Box Connector

012070229
64-0183: RNCC: 3 | RNVC: 2
SHC-1037: RNCC: 3 | RNVC: 9
5035882-2: RNCC: 7 | RNVC: 9

26 Apr 1985

5975-01-208-4753
Electrical Nonmetallic Conduit Assembly

012084753
250939: RNCC: 3 | RNVC: 2

15 May 1985

5975-01-208-4301
Electrical Equipment Mounting Base

012084301
63E41211-501: RNCC: 3 | RNVC: 2
63E41211-501: RNCC: 3 | RNVC: 9
63E41211-301: RNCC: 5 | RNVC: 9

14 May 1985

5975-01-209-6794
Electrical Nonmetallic Conduit Assembly

012096794
R58HA31A34X008: RNCC: 3 | RNVC: 2
R58HA31A34X008: RNCC: 5 | RNVC: 2
R58HA31A34X008: RNCC: 5 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-224-3026
Electrical Conduit Bushing

012243026
033756-0003: RNCC: 3 | RNVC: 2
3873-TB: RNCC: 3 | RNVC: 2
3873: RNCC: 3 | RNVC: 9
BLG 1204: RNCC: 5 | RNVC: 9
033756: RNCC: 7 | RNVC: 2

15 Jan 1986

5975-01-227-0843
Cable Strain Relief Bushing

012270843
BL-9205-1: RNCC: 3 | RNVC: 2

28 Feb 1986

5975-01-230-2457
Conduit Outlet

012302457
122-52828-1: RNCC: 3 | RNVC: 2

10 Apr 1986

5975-01-231-1759
Shunt

012311759
MLB200-100: RNCC: 3 | RNVC: 2

24 Apr 1986

5975-01-229-6058
Stuffing Tube

012296058
DBZM-5722-L: RNCC: 3 | RNVC: 1
13218E5149-8: RNCC: 7 | RNVC: 2

3 Apr 1986

5975-01-243-0193
Conduit Outlet Cover

012430193
270F: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-245-3528
Electrical-Electronic Equipment Chassis

012453528
08474: RNCC: 3 | RNVC: 9
918366-4: RNCC: 7 | RNVC: 2

26 Nov 1986

5975-01-248-7952
Electrical Components Tie Down Strap

012487952
PLT1S: RNCC: 3 | RNVC: 2
1131911F00: RNCC: 5 | RNVC: 2

31 Jan 1987

5975-01-256-0926
Electrical Components Tie Down Strap

012560926
MS3368-5-9: RNCC: 2 | RNVC: 2
127-0603-005: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9

31 May 1987

5975-01-212-3870
Flexible Metal Conduit Assembly

012123870
4B69141-133A: RNCC: 3 | RNVC: 9
4B69141-133A: RNCC: 5 | RNVC: 2
4B69141-133A: RNCC: 5 | RNVC: 9

11 Jul 1985

5975-01-213-2864
Electrical Equipment Mounting Base

012132864
28527ASSY2488352G001: RNCC: 3 | RNVC: 2
2488352G001: RNCC: 5 | RNVC: 2

25 Jul 1985

5975-01-214-1359
Flexible Metal Conduit

012141359
SM83-16: RNCC: 3 | RNVC: 2
023700-HP2000: RNCC: 3 | RNVC: 2
750-084-64: RNCC: 5 | RNVC: 2
71350-200-31: RNCC: 5 | RNVC: 2
SM83-16: RNCC: 5 | RNVC: 9
MHT-200-31: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-216-0023
Raceway Conduit Cover

012160023
V2100CA: RNCC: 3 | RNVC: 2
G2100C: RNCC: 5 | RNVC: 9
7903811-01: RNCC: 7 | RNVC: 2

5 Sep 1985

5975-01-216-7066
Cable Marker Sleeve

012167066
9317987-1: RNCC: 1 | RNVC: 2
TMS-1/8-1.50-9: RNCC: 3 | RNVC: 2
TMS-1/8-1.50: RNCC: 5 | RNVC: 9

15 Sep 1985

5975-01-216-2698
Strain Electrical Conductor Clamp

012162698
108167-001: RNCC: 3 | RNVC: 2

7 Sep 1985

5975-01-219-1951
Electrical Conduit Adapter

012191951
K15K0017-2BWF1: RNCC: 3 | RNVC: 2
K15K0017-2BWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9

23 Oct 1985

5975-01-220-2666
Conduit Outlet

012202666
L68L-207: RNCC: 3 | RNVC: 2
9050: RNCC: 5 | RNVC: 9

10 Nov 1985

5975-01-221-1898
Electrical Conduit Adapter

012211898
J15K0003-3: RNCC: 3 | RNVC: 9

25 Nov 1985

5975-01-222-2088
Stuffing Tube

012222088
CT0741-06: RNCC: 3 | RNVC: 2
P207-0006: RNCC: 3 | RNVC: 2
900-757-0006: RNCC: 3 | RNVC: 2
LE482-0027-0006: RNCC: 5 | RNVC: 2
LE482-0027: RNCC: 7 | RNVC: 2

7 Dec 1985

5975-01-259-2458
Rigid Metal Conduit Assembly

012592458
68A336077-1021: RNCC: 3 | RNVC: 2
68A336077-1021: RNCC: 5 | RNVC: 9

15 Jul 1987

5975-01-260-7963
Electrical Conduit Adapter

012607963
S2182F1550-1-12C: RNCC: 3 | RNVC: 2
GA801HL17F12CB: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-262-8529
Electrical Equipment Mounting Base

012628529
2508700: RNCC: 3 | RNVC: 2
2508700: RNCC: 5 | RNVC: 9

4 Sep 1987

5975-01-263-2273
Electrical Wall Plate

012632273
SS720: RNCC: 3 | RNVC: 9
93111: RNCC: 5 | RNVC: 9
S-720: RNCC: 5 | RNVC: 9

11 Sep 1987

5975-01-267-7818
Electrical Nonmetallic Conduit Assembly

012677818
K58H0005-2: RNCC: 3 | RNVC: 2
K58H0005-2: RNCC: 5 | RNVC: 2
K58H00005-2: RNCC: 5 | RNVC: 9
K58H0005-2: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-01-267-7820
Electrical Nonmetallic Conduit Assembly

012677820
R58HB02B44A016: RNCC: 3 | RNVC: 2
R58HB02B44A016: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-01-268-6429
Electrical Box Connector

012686429
106-0093: RNCC: 3 | RNVC: 2
2556: RNCC: 5 | RNVC: 2

4 Dec 1987

5975-01-270-8546
Blank Panel

012708546
5598130: RNCC: 3 | RNVC: 1
12341550: RNCC: 3 | RNVC: 2

14 Jan 1988

5975-01-271-3999
Junction Box Cover

012713999
4B69133-117A: RNCC: 3 | RNVC: 2

23 Jan 1988

5975-01-280-3322
Conduit Outlet

012803322
LR75-A: RNCC: 3 | RNVC: 2
T12617957 PC37: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-193-6739
Blank Panel

011936739
12325479: RNCC: 3 | RNVC: 2
5975011936739: RNCC: 6 | RNVC: 9

6 Nov 1984

5975-01-256-4540
Electrical Equipment Rack

012564540
209-071-528-101: RNCC: 3 | RNVC: 2

5 Jun 1987

5975-01-258-6233
Electrical Nonmetallic Conduit Assembly

012586233
R58HA10B33W009A: RNCC: 3 | RNVC: 1
R58HA10B33W009A: RNCC: 5 | RNVC: 1
R58HA10B33W009A: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-258-6232
Electrical Nonmetallic Conduit Assembly

012586232
R58HA04C49W010: RNCC: 3 | RNVC: 2
R58HA04C49W010: RNCC: 3 | RNVC: 2
R58HA04C49W010: RNCC: 5 | RNVC: 2
R58HA04C49W010: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-283-6256
Electrical-Electronic Equipment Chassis

012836256
V-3002: RNCC: 3 | RNVC: 9
ST83D65-5: RNCC: 5 | RNVC: 9
ST83D65: RNCC: 5 | RNVC: 9

10 Aug 1988

5975-01-074-3445
Cable Hanger

010743445
12286547: RNCC: 3 | RNVC: 2
3-140-367-03: RNCC: 5 | RNVC: 1

30 Mar 1979

5975-01-070-9503
Electrical Cable Protector

010709503
12268802: RNCC: 3 | RNVC: 2

25 Jan 1979

5975-01-081-3309
Internal Raceway Elbow

010813309
G-4017: RNCC: 3 | RNVC: 2

11 Aug 1979

5975-01-082-3466
Electrical Components Tie Down Strap

010823466
TY33M-X: RNCC: 3 | RNVC: 2
PLC1M-S4-M0: RNCC: 5 | RNVC: 2
94180099: RNCC: 5 | RNVC: 2
TY33M-0: RNCC: 5 | RNVC: 9

31 Aug 1979

5975-01-083-9642
Electrical Equipment Cabinet

010839642
A1210SC: RNCC: 3 | RNVC: 2
AB-12105JS: RNCC: 5 | RNVC: 2
E-1210SC: RNCC: 5 | RNVC: 9
002-0232: RNCC: 5 | RNVC: 9

5 Oct 1979

5975-01-093-2469
Electrical Box Connector

010932469
TW150-SI: RNCC: 3 | RNVC: 2
2126: RNCC: 3 | RNVC: 2
TC725A: RNCC: 5 | RNVC: 2
TC725: RNCC: 5 | RNVC: 9
5039: RNCC: 5 | RNVC: 9

12 Apr 1980

5975-01-097-4381
Electrical Tie Down Mounting Base

010974381
TM1A: RNCC: 3 | RNVC: 2
3550013-001: RNCC: 3 | RNVC: 2
TM1A: RNCC: 5 | RNVC: 2
HS4271-1: RNCC: 5 | RNVC: 9
HS4271-1: RNCC: C | RNVC: 1

11 Jul 1980

5975-01-081-0202
Electrical Equipment Mounting Base

010810202
622-4933-001: RNCC: 3 | RNVC: 2
MT-4934/ARC: RNCC: 5 | RNVC: 1
706A35-402-033: RNCC: 5 | RNVC: 2
622-4933-001: RNCC: 5 | RNVC: 2
622-4933-001: RNCC: 5 | RNVC: 2
5975PL0191736: RNCC: 6 | RNVC: 9

7 Aug 1979

5975-01-104-1496
Electrical Equipment Mounting Base

011041496
622-5371-001: RNCC: 3 | RNVC: 2
MT-6141/ARC-190(V): RNCC: 5 | RNVC: 2

28 Nov 1980

5975-01-109-3504
Electronic Ra Grill

011093504
958004-101: RNCC: 3 | RNVC: 2

13 Mar 1981

5975-01-113-1690
Rigid Metal Conduit Assembly

011131690
4B69143-197A: RNCC: 3 | RNVC: 2

17 May 1981

5975-01-116-0590
Electrical Wall Plate

011160590
84003: RNCC: 3 | RNVC: 9
97101: RNCC: 5 | RNVC: 2
S8: RNCC: 5 | RNVC: 9

18 Jul 1981

5975-01-118-8581
Electrical Conduit Ferrule

011188581
GR226-EM03: RNCC: 3 | RNVC: 2
GR226-EM03: RNCC: 5 | RNVC: 2
GR226-EM03: RNCC: 5 | RNVC: 2
GR2126-3: RNCC: 5 | RNVC: 9
GR2126-EM03: RNCC: 5 | RNVC: 9

12 Sep 1981

5975-01-120-1050
Electrical Conduit Bend

011201050
UA9AE: RNCC: 3 | RNVC: 2
UA9AE: RNCC: 3 | RNVC: 9
59589: RNCC: 5 | RNVC: 2
00034481060420: RNCC: 5 | RNVC: 9
E780E: RNCC: 5 | RNVC: 9

11 Oct 1981

5975-01-119-9336
Electrical Box Connector

011199336
SHC-1033: RNCC: 3 | RNVC: 2
66881AX: RNCC: 5 | RNVC: 2
66881AX: RNCC: 5 | RNVC: 9
64-0181: RNCC: C | RNVC: 1

8 Oct 1981

5975-01-121-6698
Cable Marker Sleeve

011216698
SS7074-420: RNCC: 3 | RNVC: 2

7 Nov 1981

5975-01-121-8601
Blank Panel

011218601
A-12P10: RNCC: 3 | RNVC: 9
A-12P10: RNCC: 5 | RNVC: 9

10 Nov 1981

5975-01-124-7706
Electrical Conductor Bushing

011247706
74B878001-123: RNCC: 1 | RNVC: 2
CT0905-123: RNCC: 3 | RNVC: 2
10134279: RNCC: 6 | RNVC: 9

12 Jan 1982

5975-01-124-5525
Electrical Conduit Adapter

011245525
S1877-18: RNCC: 3 | RNVC: 2
C8933-9: RNCC: 5 | RNVC: 9

7 Jan 1982

5975-01-124-7707
Electrical Conductor Bushing

011247707
CTO905-02C: RNCC: 3 | RNVC: 2
74B878001-143: RNCC: 5 | RNVC: 2
74B878001-143: RNCC: 5 | RNVC: 9
CT0905-143: RNCC: 5 | RNVC: 9
10134280: RNCC: 6 | RNVC: 9

12 Jan 1982

5975-01-126-7820
Conduit Clip Kit

011267820
12307604: RNCC: 3 | RNVC: 2

17 Feb 1982

5975-01-125-4411
Electrical Equipment Mounting Base

011254411
622-1742-004: RNCC: 3 | RNVC: 2
MT-4777/AN/ARC-174V: RNCC: 5 | RNVC: 1

27 Jan 1982

5975-01-129-0443
Conduit Outlet Cover

011290443
BS-50A: RNCC: 3 | RNVC: 2
K50-A: RNCC: 5 | RNVC: 9
BS-50A: RNCC: 5 | RNVC: 9

31 Mar 1982

5975-01-129-2485
Chassis Base

011292485
725501-1: RNCC: 3 | RNVC: 2
725501-1: RNCC: 5 | RNVC: 2
725501-1: RNCC: 5 | RNVC: 2
725501: RNCC: 5 | RNVC: 2
725501-1: RNCC: 5 | RNVC: 9

4 Apr 1982

5975-01-135-5560
Electronic Junction Rack

011355560
M81714/16-1: RNCC: 2 | RNVC: 2
MIL-T-81714/16: RNCC: 4 | RNVC: 1
M81714/16-1: RNCC: 5 | RNVC: 1
1-591621-0: RNCC: 5 | RNVC: 1
TJT03010: RNCC: 5 | RNVC: 2
MRTBL-10: RNCC: 5 | RNVC: 9

27 Jul 1982

5975-01-142-0712
Electrical Conduit Bend

011420712
ANSI/UL797: RNCC: 3 | RNVC: 1
12267095: RNCC: 3 | RNVC: 2

10 Nov 1982

5975-01-139-6204
Conduit Clamp

011396204
923-S: RNCC: 3 | RNVC: 2
PS1128: RNCC: 5 | RNVC: 9

5 Oct 1982

5975-01-141-3262
Conduit Outlet Cover

011413262
11685903: RNCC: 3 | RNVC: 2

27 Oct 1982

5975-01-142-1363
Junction Box

011421363
12267039: RNCC: 3 | RNVC: 2

12 Nov 1982

5975-01-142-8418
Flexible Metal Conduit

011428418
CAB16-3N: RNCC: 3 | RNVC: 2

21 Nov 1982

5975-01-142-3149
Conduit Connector

011423149
625-00632: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-145-7406
Conduit Outlet

011457406
E986H: RNCC: 3 | RNVC: 2
E986H: RNCC: 5 | RNVC: 9

18 Jan 1983

5975-01-150-7597
Tiedown Strap Mounting Base

011507597
TC345A: RNCC: 3 | RNVC: 2

7 Apr 1983

5975-01-151-0299
Wiring Harness Prop

011510299
123AV56617-1: RNCC: 3 | RNVC: 2
123AV56617-1: RNCC: 5 | RNVC: 2
123AV56617-1: RNCC: 5 | RNVC: 9
123AV56617-1: RNCC: 5 | RNVC: 9

12 Apr 1983

5975-01-153-0365
Adjustable Clamp

011530365
ARC68-A-14: RNCC: 3 | RNVC: 2
35356583: RNCC: 5 | RNVC: 2
CV177915: RNCC: 5 | RNVC: 2
35356583: RNCC: 5 | RNVC: 2

11 May 1983

5975-01-158-0382
Blank Panel

011580382
876935T01: RNCC: 3 | RNVC: 2
806136 PIECE 321: RNCC: 5 | RNVC: 2
876935T01: RNCC: 5 | RNVC: 2
876935-T1: RNCC: 5 | RNVC: 9

15 Jul 1983

5975-01-159-4132
Blank Panel

011594132
824990-T2: RNCC: 3 | RNVC: 2
803517 PIECE 304: RNCC: 5 | RNVC: 1

8 Aug 1983

5975-01-124-3652
Electrical Box Connector

011243652
5232AL: RNCC: 3 | RNVC: 2
046-11-9775929: RNCC: 5 | RNVC: 2
ST50AL: RNCC: 5 | RNVC: 2
00020-0134: RNCC: 5 | RNVC: 2
5232AL: RNCC: 5 | RNVC: 9
00020-0134: RNCC: 5 | RNVC: 9
5232AL: RNCC: C | RNVC: 1

1 Jan 1982

5975-01-177-5687
Electrical Tie Down Mounting Base

011775687
HS4271-3S8: RNCC: 1 | RNVC: 2
TM3S8-C: RNCC: 3 | RNVC: 2
TM3S8-C100: RNCC: 5 | RNVC: 2
HS4271-3S8: RNCC: 5 | RNVC: 9
GB0239MX: RNCC: D | RNVC: 9

27 Apr 1984

5975-01-177-3639
Electrical Tie Down Mounting Base

011773639
TM2S6-C: RNCC: 3 | RNVC: 2
Z00.N7231110811: RNCC: 5 | RNVC: 9
HS4271-2S6: RNCC: 5 | RNVC: 9
TM2S6: RNCC: 5 | RNVC: 9
HS4271-2S6: RNCC: 7 | RNVC: 2
TM2S6-C: RNCC: C | RNVC: 1
0309267: RNCC: C | RNVC: 1
5019103: RNCC: C | RNVC: 1

24 Apr 1984

5975-01-178-4509
Stuffing Tube Packing Nut

011784509
M24235/9-061: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-180-0826
Flexible Metal Conduit

011800826
206135-D10120: RNCC: 3 | RNVC: 2
759-192-135: RNCC: 5 | RNVC: 2

24 May 1984

5975-01-189-5058
Cable Hanger

011895058
441366-2: RNCC: 3 | RNVC: 2
441366-2: RNCC: 5 | RNVC: 2
441366-2: RNCC: 5 | RNVC: 9
441366-2: RNCC: 5 | RNVC: 9

16 Sep 1984

5975-01-189-4900
Electrical Box Connector

011894900
3305: RNCC: 3 | RNVC: 2
907: RNCC: 5 | RNVC: 9

16 Sep 1984

5975-01-192-0722
Electrical Equipment Mounting Base

011920722
812097-803: RNCC: 3 | RNVC: 2
812097-802: RNCC: 5 | RNVC: 9
812097: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-193-1819
Junction Box

011931819
4730W50P002: RNCC: 3 | RNVC: 2

31 Oct 1984

5975-01-192-7305
Cable Strain Relief Bushing

011927305
1287: RNCC: 3 | RNVC: 2
35286764: RNCC: 5 | RNVC: 1
SR-9P-2: RNCC: 5 | RNVC: 9

25 Oct 1984

5975-01-164-3736
Cable Hanger

011643736
LD161-0015-0001: RNCC: 3 | RNVC: 2
LD161-0015-0001: RNCC: 5 | RNVC: 2

15 Oct 1983

5975-01-164-9426
Boot Kit

011649426
50680-BLK-1: RNCC: 3 | RNVC: 2
867203-1: RNCC: C | RNVC: 1

22 Oct 1983

5975-01-169-1604
Electronic Junction Rack

011691604
CTJ3A02: RNCC: 3 | RNVC: 2

4 Jan 1984

5975-01-173-8788
Blank Panel

011738788
A10P8SS: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-175-8833
Electrical Equipment Mounting Base

011758833
70901-21919-101: RNCC: 1 | RNVC: 2
23773-1: RNCC: 3 | RNVC: 2
23773-1: RNCC: 5 | RNVC: 9

5 Apr 1984

5975-01-198-3016
Electrical Tie Down Mounting Base

011983016
TC356: RNCC: 3 | RNVC: 2
TMEH-S10-QO: RNCC: 5 | RNVC: 2
8337024: RNCC: 5 | RNVC: 9

6 Jan 1985

5975-01-202-6883
Electrical Nonmetallic Conduit Assembly

012026883
250943: RNCC: 3 | RNVC: 2

5 Mar 1985

5975-01-203-5725
Metallic Raceway

012035725
11625034: RNCC: 3 | RNVC: 2

15 Mar 1985

5975-01-203-8852
Electronic Junction Rack

012038852
M81714/5-9: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
TJT701011: RNCC: 5 | RNVC: 2

20 Mar 1985

5975-01-204-2831
Electrical Conduit Ferrule

012042831
E-4159-260: RNCC: 3 | RNVC: 2
72-260: RNCC: 3 | RNVC: 9

24 Mar 1985

5975-01-208-6415
Interconnecting Box

012086415
62118-000: RNCC: 3 | RNVC: 2

16 May 1985

5975-01-209-4385
Ground Rod

012094385
13220E1137: RNCC: 3 | RNVC: 2

30 May 1985

5975-01-209-6789
Electrical Nonmetallic Conduit Assembly

012096789
R58HA08E35X012A: RNCC: 3 | RNVC: 2
R58HA08E35X012A: RNCC: 5 | RNVC: 1
R58HA08E35X012A: RNCC: 5 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-210-2024
Rigid Metal Conduit Assembly

012102024
68A111216-1001: RNCC: 3 | RNVC: 2

7 Jun 1985

5975-01-234-0980
Electrical Entrance Elbow

012340980
SLB1: RNCC: 3 | RNVC: 2

7 Jun 1986

5975-01-243-0192
Conduit Outlet

012430192
504A: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-239-7385
Junction Box

012397385
A20H20ALP: RNCC: 3 | RNVC: 2
AB20206NF: RNCC: 5 | RNVC: 2

4 Sep 1986

5975-01-245-7781
Junction Box

012457781
A201610LP: RNCC: 3 | RNVC: 2

4 Dec 1986

5975-01-246-6906
Cable Strain Relief Bushing

012466906
1224151-4: RNCC: 3 | RNVC: 9
1224151-4: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-246-6910
Cable Strain Relief Bushing

012466910
1224151-1: RNCC: 3 | RNVC: 9
1224151-1: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-248-7078
Flexible Nonmetallic Conduit

012487078
48-02217-062: RNCC: 3 | RNVC: 2
68238-R: RNCC: 5 | RNVC: 9
48-2217-062: RNCC: 5 | RNVC: 9

30 Jan 1987

5975-01-246-6904
Cable Strain Relief Bushing

012466904
1224151-2: RNCC: 3 | RNVC: 9
1224151-2: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-249-5859
Flexible Metal Conduit

012495859
309D068-1: RNCC: 3 | RNVC: 2
309D068-1: RNCC: 5 | RNVC: 9

13 Feb 1987

5975-01-249-9120
Junction Box

012499120
A-1008SC: RNCC: 3 | RNVC: 2
AB-1084JS: RNCC: 5 | RNVC: 2

20 Feb 1987

5975-01-253-6580
Electrical Conduit Adapter

012536580
G63164-7: RNCC: 3 | RNVC: 2
100235-0007: RNCC: 5 | RNVC: 9
CH09-0340-407: RNCC: 5 | RNVC: 9
10250710-7: RNCC: D | RNVC: 9

23 Apr 1987

5975-01-255-5348
Ground Assy Stud

012555348
LS35022D3S12: RNCC: 3 | RNVC: 2

22 May 1987

5975-01-256-0876
Electrical Box Connector

012560876
SHC-1025: RNCC: 3 | RNVC: 2
000-8008-455: RNCC: 5 | RNVC: 1

31 May 1987

5975-01-210-8097
Electrical Nonmetallic Conduit Assembly

012108097
R58HB16E49W012A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-211-9127
Electrical Conduit Ferrule

012119127
53230-3: RNCC: 3 | RNVC: 2

3 Jul 1985

5975-01-211-4391
Electrical Nonmetallic Conduit Assembly

012114391
R58HB31B34Y024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

26 Jun 1985

5975-01-214-1354
Flexible Metal Conduit

012141354
71350-50-31: RNCC: 3 | RNVC: 1
SM83-04C: RNCC: 3 | RNVC: 2
750-084-16: RNCC: 3 | RNVC: 2
023700-HP0550: RNCC: 3 | RNVC: 2
MHT-50-31-P: RNCC: 5 | RNVC: 2
SM83-04: RNCC: 5 | RNVC: 9
023700-HP0500: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-216-2630
Cable Hanger

012162630
109232-001: RNCC: 3 | RNVC: 2

7 Sep 1985

5975-01-220-0505
Fan Mount Rail

012200505
85794400-01: RNCC: 3 | RNVC: 9

7 Nov 1985

5975-01-220-6297
Electrical Components Tie Down Strap

012206297
PLT1.5I-M0: RNCC: 3 | RNVC: 2
HADB 1049-13: RNCC: 5 | RNVC: 2
W002151: RNCC: 5 | RNVC: 2
1049-13: RNCC: 5 | RNVC: 2
1049-13: RNCC: 5 | RNVC: 2

16 Nov 1985

5975-01-263-5415
Mounting Base Plate

012635415
FCPI2-C20: RNCC: 3 | RNVC: 2
654028-1: RNCC: 3 | RNVC: 9
654028-1: RNCC: 5 | RNVC: 9

16 Sep 1987

5975-01-265-5115
Flexible Metal Conduit Assembly

012655115
5122605-027-101: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-265-0617
Electrical Components Tie Down Strap

012650617
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-1-9A: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9

9 Oct 1987

5975-01-266-0373
Blank Panel

012660373
651-0593-001: RNCC: 3 | RNVC: 2

20 Oct 1987

5975-01-267-4237
Electrical Nonmetallic Conduit Assembly

012674237
R58HB59H59A007: RNCC: 3 | RNVC: 1
R58HB59H59A007: RNCC: 5 | RNVC: 1
R58HB59H59A007: RNCC: 5 | RNVC: 9

11 Nov 1987

5975-01-267-4230
Electrical Conduit Adapter

012674230
K15K00173DWF1: RNCC: 3 | RNVC: 2
K15K00173DWF1: RNCC: 5 | RNVC: 2
K15K00173DWF1: RNCC: 5 | RNVC: 9

11 Nov 1987

5975-01-268-6454
Conduit Outlet Cover

012686454
383: RNCC: 3 | RNVC: 2
2D62123PK: RNCC: 7 | RNVC: 2

4 Dec 1987

5975-01-269-7885
Electrical Equipment Mounting Base

012697885
622-8725-001: RNCC: 3 | RNVC: 2
MT-6587/A: RNCC: 5 | RNVC: 1
622-8725-001: RNCC: 5 | RNVC: 2
622-8725-001: RNCC: 5 | RNVC: 2

22 Dec 1987

5975-01-270-1426
Junction Bo Support

012701426
70550-02140-103: RNCC: 3 | RNVC: 2

30 Dec 1987

5975-01-271-4000
Junction Box Cover

012714000
75453-B: RNCC: 3 | RNVC: 2
75453-B: RNCC: 5 | RNVC: 9

23 Jan 1988

5975-01-273-7482
Electrical Cable Nipple

012737482
3 130 558 000: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-274-7704
Conduit Outlet

012747704
AA50563-207ATBBA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSCA1: RNCC: 5 | RNVC: 1
FSCA-1-50: RNCC: 5 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

13 Mar 1988

5975-01-274-8806
Electrical Box Connector

012748806
SHC-1014-ZP: RNCC: 3 | RNVC: 2
5122609-023-107: RNCC: 7 | RNVC: 2

16 Mar 1988

5975-01-275-8334
Electrical Nonmetallic Conduit Assembly

012758334
R58HA08C33W008: RNCC: 3 | RNVC: 2
R58HA08C33W008: RNCC: 5 | RNVC: 9

27 Mar 1988

5975-01-275-8332
Electrical Nonmetallic Conduit Assembly

012758332
R58HA04C33W008: RNCC: 3 | RNVC: 2
R58HA04C33W008: RNCC: 3 | RNVC: 2
R58HA04C33W008: RNCC: 5 | RNVC: 9

27 Mar 1988

5975-01-276-2673
Electrical Wall Plate

012762673
86001: RNCC: 3 | RNVC: 9

6 Apr 1988

5975-01-073-3394
Support Conduit

010733394
4B69154-103A: RNCC: 3 | RNVC: 2

15 Mar 1979

5975-01-074-4497
Electrical Conduit Sealing Fitting

010744497
EYS-3-T: RNCC: 3 | RNVC: 2

31 Mar 1979

5975-01-075-7968
Electronic Junction Rack

010757968
M81714/5-2: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
421501-033: RNCC: 5 | RNVC: 1
3602-025-1102: RNCC: 5 | RNVC: 1
591613-3: RNCC: 5 | RNVC: 1
TJT701003: RNCC: 5 | RNVC: 2
11437559-2: RNCC: 5 | RNVC: 2
757592995603: RNCC: 5 | RNVC: 9
MRTB-3: RNCC: 5 | RNVC: 9
101023-3: RNCC: 5 | RNVC: 9

26 Apr 1979

5975-01-076-9582
Electrical Tie Down Mounting Base

010769582
MBNY-203-0: RNCC: 3 | RNVC: 2
A-30-203: RNCC: 5 | RNVC: 9
MBNY-203NA: RNCC: 5 | RNVC: 9

16 May 1979

5975-01-078-1185
Electrical Conduit Coupling Nut

010781185
12282135: RNCC: 3 | RNVC: 2
12282135: RNCC: D | RNVC: 9

9 Jun 1979

5975-01-078-1309
Electrical Components Tie Down Strap

010781309
TY-512M: RNCC: 3 | RNVC: 2
PL2M-M: RNCC: 5 | RNVC: 2
M4ZS301D1341: RNCC: 5 | RNVC: 2
M4ZS301D1341A: RNCC: 5 | RNVC: 2
TY-512M: RNCC: 5 | RNVC: 9
12273322: RNCC: 5 | RNVC: 9
PLM2MC: RNCC: E | RNVC: 8
PLM2MCP: RNCC: E | RNVC: 8

9 Jun 1979

5975-01-083-0150
Electrical Conductor Bushing

010830150
516-0028-550: RNCC: 3 | RNVC: 2
591339-02: RNCC: 3 | RNVC: 2
516-0028-000: RNCC: 5 | RNVC: 9
516-0028-000: RNCC: 5 | RNVC: 9
922801-1C: RNCC: 7 | RNVC: 2

14 Sep 1979

5975-01-091-2045
Rigid Nonmetallic Conduit

010912045
A52BC12: RNCC: 3 | RNVC: 2
49009: RNCC: 5 | RNVC: 9
49009-010: RNCC: 5 | RNVC: 9

4 Mar 1980

5975-01-090-8653
Electrical Conduit Coupling

010908653
E940J: RNCC: 3 | RNVC: 9
59606: RNCC: 5 | RNVC: 2
00034481061069: RNCC: 5 | RNVC: 9

26 Feb 1980

5975-01-092-4158
Rigid Metal Conduit Assembly

010924158
11671004-1: RNCC: 3 | RNVC: 2

26 Mar 1980

5975-01-092-4234
Electrical Box Connector

010924234
3300: RNCC: 3 | RNVC: 2
L51PL: RNCC: 5 | RNVC: 9

26 Mar 1980

5975-01-094-1583
Cable Strain Relief Bushing

010941583
SRB-R-6: RNCC: 3 | RNVC: 2
R-6: RNCC: 5 | RNVC: 9
SRB-R-6: RNCC: 5 | RNVC: 9
R6: RNCC: 5 | RNVC: 9
21006868: RNCC: 7 | RNVC: 2

4 May 1980

5975-01-095-1931
Electrical Cable Nipple

010951931
389-102: RNCC: 3 | RNVC: 2
389-102: RNCC: 5 | RNVC: 9

24 May 1980

5975-01-099-4556
Electrical Cable Nipple

010994556
204223: RNCC: 3 | RNVC: 2
204223: RNCC: 5 | RNVC: 9

20 Aug 1980

5975-01-102-1586
Relay Mounting Strip

011021586
37D645: RNCC: 3 | RNVC: 2
37D645: RNCC: 5 | RNVC: 9

12 Oct 1980

5975-01-101-3089
Cord Protector

011013089
751332002600: RNCC: 3 | RNVC: 2
196667-661: RNCC: 5 | RNVC: 9

27 Sep 1980

5975-01-104-9863
Electrical Box Connector

011049863
CGB196-SG: RNCC: 3 | RNVC: 2

14 Dec 1980

5975-01-105-6821
Raceway Tee

011056821
G3015E: RNCC: 3 | RNVC: 2

2 Jan 1981

5975-01-112-6593
Rigid Metal Conduit Assembly

011126593
4B69142-115A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6601
Rigid Metal Conduit Assembly

011126601
4B69143-131A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6600
Rigid Metal Conduit Assembly

011126600
4B69143-129A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6604
Rigid Metal Conduit Assembly

011126604
4B69142-119A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-108-2985
Ferrule

011082985
02-020187: RNCC: 3 | RNVC: 2
30001-001-21: RNCC: 5 | RNVC: 9

25 Feb 1981

5975-01-113-7251
Rigid Metal Conduit Assembly

011137251
4B69143-139A: RNCC: 3 | RNVC: 2
RC-4B69143-139A: RNCC: 5 | RNVC: 2
4B69143-139A: RNCC: 5 | RNVC: 9

3 Jun 1981

5975-01-113-8908
Convolute Reinforcement

011138908
CRN1137-6: RNCC: 3 | RNVC: 2
ST5M1570-006: RNCC: 5 | RNVC: 2

6 Jun 1981

5975-01-115-3003
Electrical Cable Protector

011153003
12293171: RNCC: 3 | RNVC: 2

2 Jul 1981

5975-01-118-5247
Telescoping End Fitting

011185247
200702-FE5105: RNCC: 3 | RNVC: 2
RP2100-EM05-T: RNCC: 5 | RNVC: 2
RP2100-G05-T: RNCC: 5 | RNVC: 9
RP 2100-F05-T: RNCC: 5 | RNVC: 9
S82100-F05-T: RNCC: 5 | RNVC: 9
RP 2100-F05-T: RNCC: 5 | RNVC: 9
S82100-F05-T: RNCC: 5 | RNVC: 9

4 Sep 1981

5975-01-118-8873
Conduit Chase Nipple

011188873
28-12-4KC: RNCC: 3 | RNVC: 2
188192-FA12K3: RNCC: 5 | RNVC: 1

13 Sep 1981

5975-01-119-5678
Electrical Cable Protector

011195678
12298998: RNCC: 3 | RNVC: 2
10087273: RNCC: 6 | RNVC: 9

26 Sep 1981

5975-01-119-1811
Electrical Conduit Locknut

011191811
113323A: RNCC: 3 | RNVC: 2
141: RNCC: 3 | RNVC: 9
113323A: RNCC: 5 | RNVC: 9
7-659-000205: RNCC: C | RNVC: 1

19 Sep 1981

5975-01-131-2239
Electrical Cable Nipple

011312239
ST5M1487-009: RNCC: 3 | RNVC: 2
885-325-001: RNCC: 5 | RNVC: 2
10134282: RNCC: 6 | RNVC: 9

6 May 1982

5975-01-130-2580
Junction Box Cover

011302580
65560-03108-102: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-132-0223
Electrical Conduit Locknut

011320223
BLSG75: RNCC: 3 | RNVC: 9
BLSG75: RNCC: 5 | RNVC: 2

20 May 1982

5975-01-137-8490
Conduit Outlet

011378490
5133664: RNCC: 3 | RNVC: 2
E986E: RNCC: 5 | RNVC: 9
51407: RNCC: 5 | RNVC: 9
59201: RNCC: 5 | RNVC: 9

4 Sep 1982

5975-01-142-2926
Electrical Conduit Bend

011422926
ANSI/UL797: RNCC: 3 | RNVC: 1
12267099: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-144-1061
Electronic Junction Rack

011441061
CTJ-3A-10-4021: RNCC: 3 | RNVC: 2

14 Dec 1982

5975-01-146-2852
Junction Box

011462852
A1008NFAL: RNCC: 3 | RNVC: 2
404-4597571-4: RNCC: 5 | RNVC: 2

27 Jan 1983

5975-01-146-6395
90 Elbow Assembly

011466395
C196AX2523DA: RNCC: 3 | RNVC: 2

3 Feb 1983

5975-01-148-6444
Junction Box

011486444
58313-42701-1: RNCC: 3 | RNVC: 2

8 Mar 1983

5975-01-152-5449
Blank Panel

011525449
A6P6AL: RNCC: 3 | RNVC: 2

4 May 1983

5975-01-158-2749
Blank Panel

011582749
875944-T1: RNCC: 3 | RNVC: 2
806136 PIECE 320: RNCC: 5 | RNVC: 2

19 Jul 1983

5975-01-158-4645
Electrical Box Connector

011584645
3237: RNCC: 3 | RNVC: 2
915/4/07788/001: RNCC: 5 | RNVC: 2

23 Jul 1983

5975-01-176-6872
Electrical Box Connector

011766872
91701170: RNCC: 3 | RNVC: 9
91701170: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-178-0571
Interconnecting Box

011780571
5053T69P01: RNCC: 1 | RNVC: 2
5053T69P01: RNCC: 3 | RNVC: 2
600286: RNCC: 3 | RNVC: 9

1 May 1984

5975-01-180-4596
Stuffing Tube

011804596
4667054: RNCC: 3 | RNVC: 2

29 May 1984

5975-01-180-9475
Electrical Components Tie Down Strap

011809475
TY-242MX: RNCC: 3 | RNVC: 2

5 Jun 1984

5975-01-179-4458
Blank Panel

011794458
6226240-1: RNCC: 3 | RNVC: 2
6226240-1: RNCC: 5 | RNVC: 2

18 May 1984

5975-01-184-0636
Conduit Outlet Cover

011840636
K125-150A: RNCC: 3 | RNVC: 2
K125-A: RNCC: 5 | RNVC: 9

13 Jul 1984

5975-01-186-3474
Electrical Box Connector

011863474
CGB397-SG: RNCC: 3 | RNVC: 2
CGB397: RNCC: 5 | RNVC: 1
90007027: RNCC: E | RNVC: 8

9 Aug 1984

5975-01-185-9007
Electrical-Electronic Equipment Panel

011859007
406-075-136-101: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-186-9956
Conduit Outlet Cover

011869956
K75-A: RNCC: 3 | RNVC: 2

17 Aug 1984

5975-01-188-2784
Blank Panel

011882784
806292PC303: RNCC: 3 | RNVC: 2
N20-T1: RNCC: 5 | RNVC: 2

31 Aug 1984

5975-01-163-6036
Molded Actuator Boot

011636036
730-4403-4: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-01-166-6539
Electrical Conduit Tee

011666539
8911295: RNCC: 3 | RNVC: 2
21102: RNCC: 5 | RNVC: 2

16 Nov 1983

5975-01-170-2609
Stuffing Tube

011702609
CT0741-03: RNCC: 3 | RNVC: 2
P207-0003: RNCC: 5 | RNVC: 9
LE482-0027-0003: RNCC: 7 | RNVC: 2

22 Jan 1984

5975-01-170-3480
Junction Box Cover

011703480
10924576: RNCC: 3 | RNVC: 2
10924576: RNCC: 5 | RNVC: 9

24 Jan 1984

5975-01-168-0475
Electrical-Electronic Equipment Chassis

011680475
12317124: RNCC: 3 | RNVC: 2

10 Dec 1983

5975-01-170-4131
Rigid Metal Conduit Assembly

011704131
13074552: RNCC: 3 | RNVC: 2
N13074552: RNCC: 5 | RNVC: 9
13074552: RNCC: 5 | RNVC: 9

24 Jan 1984

5975-01-168-1564
Electrical Conduit Coupling

011681564
240-DC: RNCC: 3 | RNVC: 9

13 Dec 1983

5975-01-173-0332
Electrical Components Tie Down Strap

011730332
21662224-032: RNCC: 3 | RNVC: 9
2166 2224-032: RNCC: 5 | RNVC: 2
21662224-032: RNCC: 5 | RNVC: 9
90891-991: RNCC: 5 | RNVC: 9
TM3S8: RNCC: 5 | RNVC: 9

29 Feb 1984

5975-01-175-0929
Blank Panel

011750929
N111-T1: RNCC: 3 | RNVC: 2
806314 PIECE 305: RNCC: 5 | RNVC: 2

27 Mar 1984

5975-01-175-8834
Electrical Equipment Mounting Base

011758834
70901-21915-102: RNCC: 1 | RNVC: 2
23706-2: RNCC: 3 | RNVC: 2
70901-21915-107: RNCC: 5 | RNVC: 2

5 Apr 1984

5975-01-189-4660
Cable Hanger

011894660
12324192: RNCC: 3 | RNVC: 2

15 Sep 1984

5975-01-198-0638
Blank Panel

011980638
7-314200005: RNCC: 3 | RNVC: 2
7-314200005: RNCC: 5 | RNVC: 9

4 Jan 1985

5975-01-197-8462
Electrical Equipment Mounting Base

011978462
A3013787-1: RNCC: 3 | RNVC: 2

29 Dec 1984

5975-01-203-2127
Electrical Components Tie Down Strap

012032127
6-300-000326: RNCC: 3 | RNVC: 2
6-300-000326: RNCC: 5 | RNVC: 1
2CF508: RNCC: 5 | RNVC: 2
1159-6-300-000326: RNCC: 5 | RNVC: 2
2CF508: RNCC: 5 | RNVC: 9
1159-6-300-000326: RNCC: 5 | RNVC: 9

12 Mar 1985

5975-01-205-6233
Stuffing Tube

012056233
CT0741-05: RNCC: 3 | RNVC: 2
P207-0005: RNCC: 3 | RNVC: 2
LE482-0027-0005: RNCC: 7 | RNVC: 2

10 Apr 1985

5975-01-206-8844
Stuffing Tube

012068844
CT0285: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-01-208-6233
Cable Hanger

012086233
AS23190/1: RNCC: 3 | RNVC: 1
M23190/1-3: RNCC: 3 | RNVC: 2
AS23190/1: RNCC: 5 | RNVC: 9
M23190/1-3: RNCC: 5 | RNVC: 9
M23190/1-3: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9

16 May 1985

5975-01-209-6787
Electrical Nonmetallic Conduit Assembly

012096787
R58HA04C44W008: RNCC: 3 | RNVC: 2
R58HA04C44W008: RNCC: 5 | RNVC: 2
R58HA04C44W008: RNCC: 5 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-223-8533
Electrical Components Tie Down Strap

012238533
PLT2M-C: RNCC: 3 | RNVC: 2
RT377: RNCC: 5 | RNVC: 2
TY5232M: RNCC: 5 | RNVC: 2
10170: RNCC: 5 | RNVC: 2
10325: RNCC: 5 | RNVC: 2
PLT2M: RNCC: 5 | RNVC: 9
R18L9C: RNCC: 5 | RNVC: 9
WIT-18V: RNCC: 5 | RNVC: 9

8 Jan 1986

5975-01-224-4017
Electrical Nonmetallic Conduit Assembly

012244017
251793: RNCC: 3 | RNVC: 2

15 Jan 1986

5975-01-224-7208
Rigid Metal Conduit Assembly

012247208
210568-DI0140: RNCC: 3 | RNVC: 2
5904030-2: RNCC: 5 | RNVC: 2
5904030-2: RNCC: 5 | RNVC: 9
5904030-2: RNCC: 5 | RNVC: 9

22 Jan 1986

5975-01-226-2619
Blank Panel

012262619
1244126-1: RNCC: 3 | RNVC: 9
1244126-1: RNCC: C | RNVC: 1

14 Feb 1986

5975-01-242-0292
Cable Spacer

012420292
62A25B3: RNCC: 3 | RNVC: 2

6 Oct 1986

5975-01-247-2288
Rigid Metal Conduit

012472288
B1900-7202: RNCC: 3 | RNVC: 2

30 Dec 1986

5975-01-247-3941
Electrical Components Tie Down Strap

012473941
PLT4S0: RNCC: 3 | RNVC: 2
23-9796-509: RNCC: 5 | RNVC: 2

6 Jan 1987

5975-01-249-3410
Stuffing Tube Packing Nut

012493410
M24235/1-020: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

10 Feb 1987

5975-01-249-7235
Stuffing Tube

012497235
M24235/14-003: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-250-4761
Stuffing Tube

012504761
M24235/13-008: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
M24235/13-008: RNCC: 5 | RNVC: 1
336817: RNCC: C | RNVC: 1

2 Mar 1987

5975-01-250-6428
Electrical Conductor Bushing

012506428
8-140-002-13: RNCC: 3 | RNVC: 2

5 Mar 1987

5975-01-252-6485
Conduit Outlet Cover

012526485
FSK-2B-CM: RNCC: 3 | RNVC: 2
ST29D40: RNCC: 5 | RNVC: 9

5 Apr 1987

5975-01-254-0423
Junction Box

012540423
A8066CH: RNCC: 3 | RNVC: 2

30 Apr 1987

5975-01-256-2562
Ground Rod Kit

012562562
SC-C-446190: RNCC: 3 | RNVC: 2

3 Jun 1987

5975-01-210-8078
Electrical Nonmetallic Conduit Assembly

012108078
R58HB09D34W008D: RNCC: 3 | RNVC: 1
R58HB09D34W008D: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Jun 1985

5975-01-210-9825
Electrical Box Connector

012109825
CGB296SG: RNCC: 3 | RNVC: 2
120-01891-5: RNCC: 3 | RNVC: 2
13229E0880-5: RNCC: 3 | RNVC: 2
120-01891-5: RNCC: 5 | RNVC: 9
SR-75-750: RNCC: 5 | RNVC: 9

20 Jun 1985

5975-01-212-7863
Flexible Metal Conduit

012127863
1/2 IN. TYPE O.R.: RNCC: 3 | RNVC: 2
12275547-2: RNCC: E | RNVC: 8

18 Jul 1985

5975-01-214-0370
Cable Hanger

012140370
343-0170-00: RNCC: 3 | RNVC: 2
343-0170-00: RNCC: 5 | RNVC: 2

4 Aug 1985

5975-01-217-0579
Blank Panel

012170579
PMBF-1: RNCC: 3 | RNVC: 2

20 Sep 1985

5975-01-219-1950
Electrical Conduit Adapter

012191950
K15K0017-2HWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9

23 Oct 1985

5975-01-259-9212
Electrical Cable Assembly Protector

012599212
405-10661-2: RNCC: 3 | RNVC: 2

23 Jul 1987

5975-01-220-0507
Fan Mount Rail

012200507
85794400-03: RNCC: 3 | RNVC: 9

7 Nov 1985

5975-01-222-2083
Electrical Nonmetallic Conduit Assembly

012222083
R58HB12H16Y018C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

7 Dec 1985

5975-01-263-0104
Electrical Conduit Adapter

012630104
RP2100-EM04-T: RNCC: 3 | RNVC: 2
RP2110-04-T: RNCC: 5 | RNVC: 2
RP2110-EM04-T: RNCC: 5 | RNVC: 9
RP2000: RNCC: 5 | RNVC: 9
SA2110-EM04-T: RNCC: 5 | RNVC: 9

9 Sep 1987

5975-01-260-2731
Electrical Equipment Mounting Base

012602731
9385012: RNCC: 1 | RNVC: 2
A0LA-X1068: RNCC: 3 | RNVC: 2
A0LA-X1068: RNCC: 5 | RNVC: 9

29 Jul 1987

5975-01-267-1762
Electrical Conduit Locknut

012671762
142SL: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-01-270-4588
Junction Box

012704588
KS-23560-1 PIECE 6: RNCC: 3 | RNVC: 2
KS-23560-1 PIECE 6: RNCC: 5 | RNVC: 9

7 Jan 1988

5975-01-270-9984
Tube

012709984
CTG04EJE: RNCC: 3 | RNVC: 2
46-055795-01: RNCC: 5 | RNVC: 2
46-055795-01: RNCC: 7 | RNVC: 9

16 Jan 1988

5975-01-271-1314
Electrical Conduit Adapter

012711314
11449338-2: RNCC: 3 | RNVC: 2
11449338-2: RNCC: 5 | RNVC: 1
A102: RNCC: 5 | RNVC: 9

19 Jan 1988

5975-01-271-2990
Electrical Conduit Adapter

012712990
11449359: RNCC: 3 | RNVC: 2
11449359: RNCC: 5 | RNVC: 9

22 Jan 1988

5975-01-274-4710
Conduit Outlet Cover

012744710
5122609-013-103: RNCC: 3 | RNVC: 2
ZP-C-2520-12: RNCC: 3 | RNVC: 2

9 Mar 1988

5975-01-274-4810
Block Mounting Bracket

012744810
M81714/29-1: RNCC: 3 | RNVC: 2
M81714/29-1: RNCC: 3 | RNVC: 9
AS81714/29: RNCC: 5 | RNVC: 1
M81714/29-1: RNCC: 5 | RNVC: 9
MIL-T-81714/29: RNCC: 5 | RNVC: 9
AS81714/29: RNCC: 5 | RNVC: 9

9 Mar 1988

5975-01-275-2738
Parallel Clamp

012752738
423B: RNCC: 3 | RNVC: 9
624: RNCC: 5 | RNVC: 9

19 Mar 1988

5975-01-275-5182
Electrical Nonmetallic Conduit Assembly

012755182
R58HA02B31A008: RNCC: 3 | RNVC: 2
R58HA02B31A008: RNCC: 5 | RNVC: 9

23 Mar 1988

5975-01-281-1982
Electrical Equipment Mounting Base

012811982
WG9235A1: RNCC: 3 | RNVC: 2
WG9235-A1: RNCC: 5 | RNVC: 2

18 Jun 1988

5975-01-280-0481
Electrical Components Tie Down Strap

012800481
7130K12: RNCC: 3 | RNVC: 2
001-002941-002: RNCC: 5 | RNVC: 2
10340190: RNCC: 6 | RNVC: 9

29 May 1988

5975-01-278-9815
Electrical Box Connector

012789815
SHC-1016: RNCC: 3 | RNVC: 2
99AD1679-76-101: RNCC: 5 | RNVC: 9

12 May 1988

5975-01-283-6257
Junction Box Cover

012836257
848998: RNCC: 3 | RNVC: 9

10 Aug 1988

5975-01-068-0500
Cable Strain Relief Bushing

010680500
SR-2P-4: RNCC: 3 | RNVC: 2

15 Nov 1978

5975-01-088-5993
Junction Box

010885993
4B69135-105A: RNCC: 3 | RNVC: 2

16 Jan 1980

5975-01-125-6777
Junction Box Cover

011256777
11677687: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-129-2039
Electronic Equipment Mounting Tray

011292039
232-36141-1: RNCC: 3 | RNVC: 2

4 Apr 1982

5975-01-127-7593
Electrical Conduit Adapter

011277593
S3195-2203-8W: RNCC: 3 | RNVC: 1
31A00003L20C12: RNCC: 3 | RNVC: 1
CRN3444-33: RNCC: 3 | RNVC: 2
710FS137D33A3: RNCC: 3 | RNVC: 2
ST5M1331L20C12: RNCC: 5 | RNVC: 1
10134284: RNCC: 6 | RNVC: 9

7 Mar 1982

5975-01-130-2578
Junction Box Cover

011302578
65560-03150-119: RNCC: 3 | RNVC: 2
65560-03150-119: RNCC: 5 | RNVC: 2
65560-03150-103: RNCC: 5 | RNVC: 9
65560-03150-109: RNCC: 5 | RNVC: 9

19 Apr 1982

5975-01-121-0745
Small Cable Tie

011210745
81085: RNCC: 3 | RNVC: 2
81085: RNCC: 5 | RNVC: 9
81085: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-188-0134
Electrical Tie Down Mounting Base

011880134
FCPI2-20: RNCC: 3 | RNVC: 2
FCPI2-20: RNCC: 5 | RNVC: 9
ES8616-02A: RNCC: 5 | RNVC: 9

29 Aug 1984

5975-01-189-5817
Cable Marker Sleeve

011895817
708406-6: RNCC: 3 | RNVC: 2

17 Sep 1984

5975-01-191-4737
Cable Support Strip

011914737
406-075-148-111: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-258-8246
Conduit Outlet

012588246
GEMT-1: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-219-7193
Electrical Conduit Adapter

012197193
K15K0017-2FWF1: RNCC: 3 | RNVC: 2
K15K017-2FWF1: RNCC: 5 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9
K15K0017: RNCC: 7 | RNVC: 1

1 Nov 1985

5975-01-261-1164
Electrical Components Tie Down Strap

012611164
TY53418PX: RNCC: 3 | RNVC: 2
C5078204-1: RNCC: 5 | RNVC: 9
5035611-1: RNCC: 5 | RNVC: 9

9 Aug 1987

5975-01-262-5329
Electrical Nonmetallic Conduit Assembly

012625329
R58HA33B34A010: RNCC: 3 | RNVC: 1
R58HA33B34A010: RNCC: 5 | RNVC: 1
R58HA33B34A010: RNCC: 5 | RNVC: 9

30 Aug 1987

5975-01-068-0462
Junction Box Cover

010680462
S1003GN: RNCC: 3 | RNVC: 2
BACC50AF1: RNCC: 7 | RNVC: 2

15 Nov 1978

5975-01-068-4075
Electrical Cable Nipple

010684075
12273147-430: RNCC: 1 | RNVC: 2
202F242-50: RNCC: 3 | RNVC: 2
313F353-8: RNCC: 5 | RNVC: 2
313F353-8: RNCC: 5 | RNVC: 9
CAN68335BC01-50: RNCC: 5 | RNVC: 9
313F353-8: RNCC: C | RNVC: 1

25 Nov 1978

5975-01-073-9727
Electrical Tie Down Mounting Base

010739727
12279483: RNCC: 3 | RNVC: 2

24 Mar 1979

5975-01-074-6890
Conduit Outlet

010746890
GUAT36: RNCC: 3 | RNVC: 2
ST41D9-7: RNCC: 5 | RNVC: 9

6 Apr 1979

5975-01-074-5469
Electrical Conduit Adapter

010745469
59617: RNCC: 3 | RNVC: 2
E943F: RNCC: 5 | RNVC: 2
E943F: RNCC: 5 | RNVC: 2
E943F: RNCC: 5 | RNVC: 9
00034481062035: RNCC: 5 | RNVC: 9
033746-0003: RNCC: C | RNVC: 1

3 Apr 1979

5975-01-075-5405
Conduit Outlet

010755405
FSC-1-50L: RNCC: 3 | RNVC: 2
FSC1019: RNCC: 5 | RNVC: 9

23 Apr 1979

5975-01-076-1831
Electrical Wall Plate

010761831
12272613: RNCC: 3 | RNVC: 2

2 May 1979

5975-01-079-4082
Box Junction Cover

010794082
M129-55: RNCC: 3 | RNVC: 2
M129-55: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-079-4086
Box Junction Cover

010794086
M129-53: RNCC: 3 | RNVC: 2
M129-53: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-082-5430
Electrical Tie Down Mounting Base

010825430
TC5345A: RNCC: 3 | RNVC: 2
74B059271-201: RNCC: 7 | RNVC: 1

5 Sep 1979

5975-01-082-3203
Blank Panel

010823203
12683B: RNCC: 3 | RNVC: 2

31 Aug 1979

5975-01-082-6670
Electronic Junction Rack

010826670
CTJ-3D-05: RNCC: 3 | RNVC: 2
10190729: RNCC: 6 | RNVC: 9

7 Sep 1979

5975-01-085-4517
Electrical Conduit Tee

010854517
EYS-6: RNCC: 3 | RNVC: 2
55856: RNCC: 5 | RNVC: 2
55856: RNCC: 5 | RNVC: 9
55856: RNCC: 7 | RNVC: 9

8 Nov 1979

5975-01-096-9002
Resistor Box Assemb

010969002
70550-01132-044: RNCC: 3 | RNVC: 2
70550-01132-041: RNCC: 5 | RNVC: 1

30 Jun 1980

5975-01-103-4608
Electrical-Electronic Equipment Chassis

011034608
08481-20011: RNCC: 3 | RNVC: 9
08481-20011: RNCC: 5 | RNVC: 9
08481-20011: RNCC: C | RNVC: 1

13 Nov 1980

5975-01-110-5578
Electrical Grounding Plate

011105578
3365615-1: RNCC: 3 | RNVC: 2
3365615-1: RNCC: 5 | RNVC: 2
3365615-1: RNCC: 5 | RNVC: 2
5975PL0802179: RNCC: 6 | RNVC: 9

2 Apr 1981

5975-01-111-2030
Nonmetalic Raceway Conduit

011112030
E2X2LG6: RNCC: 3 | RNVC: 2
SL-2X2-G: RNCC: 5 | RNVC: 2

12 Apr 1981

5975-01-112-6591
Rigid Metal Conduit Assembly

011126591
4B69142-101A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6598
Rigid Metal Conduit Assembly

011126598
4B69143-125A: RNCC: 3 | RNVC: 2
4B69143-125A: RNCC: 5 | RNVC: 9

8 May 1981

5975-01-114-7422
Electrical Cable Protector

011147422
12299309: RNCC: 3 | RNVC: 2
10387880: RNCC: 6 | RNVC: 9

22 Jun 1981

5975-01-114-8071
Cable Hanger

011148071
101-107-104: RNCC: 3 | RNVC: 2
1031: RNCC: 5 | RNVC: 2
1031: RNCC: 5 | RNVC: 2

23 Jun 1981

5975-01-116-4471
Electrical-Electronic Equipment Chassis

011164471
484419-1-2: RNCC: 3 | RNVC: 2

26 Jul 1981

5975-01-122-5834
Junction Box

011225834
3-MBS: RNCC: 3 | RNVC: 2
692: RNCC: 5 | RNVC: 2
401-4676882 ITEM 8: RNCC: 5 | RNVC: 2

25 Nov 1981

5975-01-124-0352
Junction Box

011240352
7302RAC: RNCC: 3 | RNVC: 2
7302: RNCC: 3 | RNVC: 9
7555: RNCC: 5 | RNVC: 9

27 Dec 1981

5975-01-125-3326
Electrical Components Tie Down Strap

011253326
187222: RNCC: 3 | RNVC: 2
187222: RNCC: 5 | RNVC: 9

25 Jan 1982

5975-01-127-7595
Electrical Box Connector

011277595
SHC-1027: RNCC: 3 | RNVC: 2
64-0180: RNCC: C | RNVC: 1
DB934: RNCC: E | RNVC: 8

7 Mar 1982

5975-01-127-7592
Electrical Conduit Adapter

011277592
710FS137D09A3: RNCC: 3 | RNVC: 2
S3195-0901-8W: RNCC: 3 | RNVC: 2
CRN3444-09: RNCC: 3 | RNVC: 2
ST5M1331L12C06: RNCC: 5 | RNVC: 2
6430-06-033-13: RNCC: 5 | RNVC: 9
31A00003L12C06: RNCC: 5 | RNVC: 9
10134287: RNCC: 6 | RNVC: 9

7 Mar 1982

5975-01-130-8497
Electrical-Electronic Equipment Chassis

011308497
659-0989-002: RNCC: 3 | RNVC: 2
641-4348-002: RNCC: 5 | RNVC: 9
659-0989-005: RNCC: 5 | RNVC: 9

29 Apr 1982

5975-01-132-7063
Flexible Metal Conduit Assembly

011327063
4B69143-145A: RNCC: 3 | RNVC: 2
4B69143-145A: RNCC: 3 | RNVC: 2
4B69143-145A: RNCC: 5 | RNVC: 1
251616: RNCC: 5 | RNVC: 2

3 Jun 1982

5975-01-132-7061
Flexible Metal Conduit Assembly

011327061
4B69142-191A: RNCC: 3 | RNVC: 2
4B69142-191A: RNCC: 3 | RNVC: 2
4B69142-191A: RNCC: 3 | RNVC: 2
4B69142-191A: RNCC: 3 | RNVC: 2

3 Jun 1982

5975-01-139-3860
Cable Strain Relief Bushing

011393860
1237: RNCC: 3 | RNVC: 2
53900001: RNCC: 5 | RNVC: 9
6P3-4: RNCC: 5 | RNVC: 9

30 Sep 1982

5975-01-142-0509
Cable Hanger

011420509
12311391: RNCC: 3 | RNVC: 2

9 Nov 1982

5975-01-142-2176
Electrical Conduit Bend

011422176
ANSI/UL797: RNCC: 3 | RNVC: 1
12267098-2: RNCC: 3 | RNVC: 2

13 Nov 1982

5975-01-142-8420
Flexible Metal Conduit

011428420
CAB20-3N: RNCC: 3 | RNVC: 2
SM 83-03N: RNCC: E | RNVC: 8
750-085-12: RNCC: E | RNVC: 8
71350-38-31R: RNCC: E | RNVC: 8
023700-HE0375: RNCC: E | RNVC: 8

21 Nov 1982

5975-01-143-4802
Electronic Junction Rack

011434802
2-591613-0: RNCC: 3 | RNVC: 2
5262862: RNCC: 5 | RNVC: 2
MRTB20: RNCC: 5 | RNVC: 9

4 Dec 1982

5975-01-151-9033
Electrical Tie Down Mounting Base

011519033
LPMS-S8-C: RNCC: 3 | RNVC: 2
08458: RNCC: 5 | RNVC: 2
485927-1: RNCC: 5 | RNVC: 9

23 Apr 1983

5975-01-158-3009
Electrical-Electronic Equipment Panel

011583009
12330280: RNCC: 3 | RNVC: 2
12330280: RNCC: 5 | RNVC: 2
12330280: RNCC: 5 | RNVC: 2
BML61442: RNCC: 5 | RNVC: 9

20 Jul 1983

5975-01-159-4244
Fuse Mounting Pan

011594244
803517 PIECE 308: RNCC: 3 | RNVC: 2
871649-A: RNCC: 5 | RNVC: 2
806314 PIECE 308: RNCC: 5 | RNVC: 9

8 Aug 1983

5975-01-160-3729
Electrical Insulation Conduit Sleeve

011603729
B135846-1: RNCC: 3 | RNVC: 2
135846-1: RNCC: 5 | RNVC: 9
135846-1: RNCC: 5 | RNVC: 9

21 Aug 1983

5975-01-176-6873
Electrical Box Connector

011766873
91701178N: RNCC: 3 | RNVC: 2
91701178: RNCC: 3 | RNVC: 9
91701178: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-180-9892
Electrical Box Connector

011809892
E-8353200300: RNCC: 3 | RNVC: 2
83532-003: RNCC: 5 | RNVC: 9

6 Jun 1984

5975-01-182-5766
Electrical Cable Protector

011825766
BACS45A20: RNCC: 3 | RNVC: 2
BACS45A: RNCC: 5 | RNVC: 2
011825766-99307: RNCC: 5 | RNVC: 2

26 Jun 1984

5975-01-186-0114
Conduit Outlet Cover

011860114
K100-A: RNCC: 3 | RNVC: 2

6 Aug 1984

5975-01-188-2785
Blank Panel

011882785
806292PC305: RNCC: 3 | RNVC: 2
N18-T2: RNCC: 5 | RNVC: 2

31 Aug 1984

5975-01-185-0953
Electrical Cable Support

011850953
G134203-1: RNCC: 3 | RNVC: 2
G134203-1: RNCC: 5 | RNVC: 2
G134203-1: RNCC: 5 | RNVC: 9

25 Jul 1984

5975-01-190-3330
Cable Clamp

011903330
135223-1: RNCC: 1 | RNVC: 2
CP-58: RNCC: 3 | RNVC: 2
CP-58: RNCC: 3 | RNVC: 9
135223-1: RNCC: 5 | RNVC: 9

26 Sep 1984

5975-01-160-3682
Blank Panel

011603682
BP66AL: RNCC: 3 | RNVC: 2

21 Aug 1983

5975-01-164-3742
Electrical Conduit Locknut

011643742
LD482-0049-0006: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-169-9405
Electrical Components Tie Down Strap

011699405
10-620013: RNCC: 1 | RNVC: 2
PLT2I-M30: RNCC: 3 | RNVC: 2
RT-508-HSBK: RNCC: 3 | RNVC: 2
0538038: RNCC: 5 | RNVC: 2
10-620013: RNCC: C | RNVC: 1
PLT2I-C20: RNCC: E | RNVC: 8

18 Jan 1984

5975-01-173-8785
Blank Panel

011738785
A10P8AL: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-173-9588
Junction Box

011739588
A12106CHNFSS: RNCC: 3 | RNVC: 2
AB12105JHFX: RNCC: 3 | RNVC: 2
12106-4XSCHC: RNCC: 5 | RNVC: 2
AB-12105JHFK: RNCC: 5 | RNVC: 9

13 Mar 1984

5975-01-197-5505
Electrical Equipment Mounting Base

011975505
12340167: RNCC: 3 | RNVC: 2
12340167: RNCC: 5 | RNVC: 1
123A0167: RNCC: 5 | RNVC: 9
5588100-R: RNCC: 5 | RNVC: 9
5975PL0833794: RNCC: 6 | RNVC: 9

22 Dec 1984

5975-01-198-9915
Junction Box

011989915
D9289-1: RNCC: 3 | RNVC: 2

17 Jan 1985

5975-01-202-0784
Cover Switch

012020784
6932257-2: RNCC: 3 | RNVC: 2
6932257-2: RNCC: 5 | RNVC: 1

27 Feb 1985

5975-01-203-4388
Stuffing Tube

012034388
CT0741-17: RNCC: 3 | RNVC: 2
P207-0017: RNCC: 3 | RNVC: 2
900-757-0017: RNCC: 3 | RNVC: 2
LE482-0027-0017: RNCC: 7 | RNVC: 2

14 Mar 1985

5975-01-209-6784
Electrical Nonmetallic Conduit Assembly

012096784
R58HB16B33W006: RNCC: 3 | RNVC: 1
R58HB16B33W006: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-210-5441
Electrical Conduit Adapter

012105441
J15K0008-3: RNCC: 3 | RNVC: 2
J15K0008-3: RNCC: 5 | RNVC: 9

14 Jun 1985

5975-01-227-9867
Electrical Nonmetallic Conduit Assembly

012279867
R58HB33D36X024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

13 Mar 1986

5975-01-226-9601
Electronic Junction Rack

012269601
M81714/5-12: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
1-591613-4: RNCC: 5 | RNVC: 1
421501-114: RNCC: 5 | RNVC: 1
MRTB14: RNCC: 5 | RNVC: 9

26 Feb 1986

5975-01-231-1462
Instrument Shelf

012311462
11023407: RNCC: 3 | RNVC: 2

23 Apr 1986

5975-01-231-5026
Electrical Equipment Cabinet

012315026
6959249-1: RNCC: 3 | RNVC: 2
77029-002: RNCC: 3 | RNVC: 2
512400: RNCC: 5 | RNVC: 9

29 Apr 1986

5975-01-231-0282
Electrical Tie Down Mounting Base

012310282
FCM2-S6-14: RNCC: 3 | RNVC: 2
SM-A-988524: RNCC: 7 | RNVC: 2

22 Apr 1986

5975-01-234-7745
Electrical Box Connector

012347745
F361-11327-508: RNCC: 3 | RNVC: 2

19 Jun 1986

5975-01-243-2102
Electrical Components Tie Down Strap

012432102
PLT3I-C0: RNCC: 3 | RNVC: 2
PLT3IC0: RNCC: 5 | RNVC: 1
10001181-5: RNCC: 5 | RNVC: 2
05253534: RNCC: 5 | RNVC: 2
WIT-30VL: RNCC: 5 | RNVC: 9
T40I0C2: RNCC: 5 | RNVC: 9
08930: RNCC: 5 | RNVC: 9
RT511: RNCC: 5 | RNVC: 9

23 Oct 1986

5975-01-243-9958
Blank Panel

012439958
GP500DG1: RNCC: 3 | RNVC: 2
G436-1: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-243-9957
Blank Panel

012439957
GP500DG-2: RNCC: 3 | RNVC: 2
G436-2: RNCC: 5 | RNVC: 9
G436-2: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-248-4499
Electrical Conduit Adapter

012484499
74A586694-2003: RNCC: 3 | RNVC: 9
74A586694-2003: RNCC: 5 | RNVC: 2

23 Jan 1987

5975-01-249-3409
Stuffing Tube Packing Nut

012493409
M24235/1-019: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

10 Feb 1987

5975-01-249-9060
Electrical Box Connector

012499060
370AL: RNCC: 3 | RNVC: 2

20 Feb 1987

5975-01-253-6881
Electrical Equipment Mounting Base

012536881
24895-2/01: RNCC: 3 | RNVC: 2
11461528-3: RNCC: 5 | RNVC: 1
11461528-3: RNCC: 5 | RNVC: 2

23 Apr 1987

5975-01-257-1055
Junction Box

012571055
BI-3-J59: RNCC: 3 | RNVC: 2
GJ800AU1J: RNCC: 5 | RNVC: 9
GJ800AU1J: RNCC: 5 | RNVC: 9
GJ800AU1J: RNCC: C | RNVC: 1

12 Jun 1987

5975-01-174-9374
Junction Box

011749374
A1210NFAL: RNCC: 3 | RNVC: 2

24 Mar 1984

5975-01-214-1358
Flexible Metal Conduit

012141358
SM83-12: RNCC: 3 | RNVC: 2
SM83-12: RNCC: 3 | RNVC: 9
71350-150-31: RNCC: 5 | RNVC: 2
750-084-48: RNCC: 5 | RNVC: 2
MHT-150-31P: RNCC: 5 | RNVC: 2
023700-HP1500: RNCC: 5 | RNVC: 2

6 Aug 1985

5975-01-216-7899
Electrical Nonmetallic Conduit Assembly

012167899
R58HB22B33W010A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

17 Sep 1985

5975-01-220-0506
Fan Mount Rail

012200506
85794400-02: RNCC: 3 | RNVC: 9

7 Nov 1985

5975-01-258-8683
Cable Hanger

012588683
9396141: RNCC: 3 | RNVC: 2

9 Jul 1987

5975-01-259-5938
Cbl Stora Lower Arm

012595938
13222E7056: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-262-4806
Circuit Breaker Guard

012624806
918273-1: RNCC: 3 | RNVC: 2

29 Aug 1987

5975-01-262-9978
Electronic Equipment Mounting Tray

012629978
405-10662-501: RNCC: 3 | RNVC: 2

9 Sep 1987

5975-01-261-9696
Electrical Box Connector

012619696
07401032: RNCC: 3 | RNVC: 2
074-01-032: RNCC: 3 | RNVC: 9

20 Aug 1987

5975-01-266-9498
Cable Hanger

012669498
AS23190/1: RNCC: 3 | RNVC: 1
M23190/1-5: RNCC: 3 | RNVC: 2
M23190/1-5: RNCC: 5 | RNVC: 9
M23190/1-5: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190/1: RNCC: 5 | RNVC: 9

3 Nov 1987

5975-01-267-2759
Electrical Box Connector

012672759
SHC1021CR: RNCC: 3 | RNVC: 2
SHC-1021-CR: RNCC: 5 | RNVC: 9

8 Nov 1987

5975-01-267-0086
Flexible Metal Conduit Assembly

012670086
11973-0009: RNCC: 3 | RNVC: 2
LE161-0021-0009: RNCC: 7 | RNVC: 2

4 Nov 1987

5975-01-270-4621
Electrical Tie Down Mounting Base

012704621
FCM3-A-L14: RNCC: 3 | RNVC: 2
91615892: RNCC: 5 | RNVC: 2

7 Jan 1988

5975-01-271-3986
Junction Box

012713986
4B69133-128A: RNCC: 3 | RNVC: 2

23 Jan 1988

5975-01-272-0449
Cable Marker Sleeve

012720449
TMS3/4-44: RNCC: 3 | RNVC: 2
TMS-3/4-1.50-9: RNCC: 5 | RNVC: 2
TMS3/4-1.732: RNCC: 5 | RNVC: 9

3 Feb 1988

5975-01-274-0322
Junction Box

012740322
JIC-1: RNCC: 3 | RNVC: 2
5122609-045-105: RNCC: 5 | RNVC: 1

4 Mar 1988

5975-01-275-9792
Electrical Conduit Coupling Nut

012759792
10-90210-120: RNCC: 3 | RNVC: 2

30 Mar 1988

5975-01-071-3491
Flexible Nonmetallic Conduit

010713491
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1009: RNCC: 3 | RNVC: 2
SAE AS81914/1-1009: RNCC: 3 | RNVC: 9
SAE AS81914: RNCC: 5 | RNVC: 1
M81914/1-1009: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
SAE AS81914/1-1009: RNCC: 5 | RNVC: 9
SAE AS81914: RNCC: 5 | RNVC: 9

6 Feb 1979

5975-01-075-0583
Electrical Box

010750583
4B69150-105A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-081-3308
Flat Raceway Elbow

010813308
G-4011: RNCC: 3 | RNVC: 2

11 Aug 1979

5975-01-082-7619
Electronic Junction Rack

010827619
HS4778-102: RNCC: 1 | RNVC: 2
CTJ3D02: RNCC: 3 | RNVC: 2
438932-1: RNCC: 3 | RNVC: 2
C8714-12: RNCC: 5 | RNVC: 2
970202-1: RNCC: 5 | RNVC: 2
149925-1: RNCC: 5 | RNVC: 2
CTJ3C03: RNCC: 5 | RNVC: 9
HS4778-102: RNCC: 5 | RNVC: 9
10134304: RNCC: 6 | RNVC: 9
5975PL0929603: RNCC: 6 | RNVC: 9

10 Sep 1979

5975-01-083-5736
Electrical Cable Nipple

010835736
12273176-420: RNCC: 1 | RNVC: 2
222F242-51: RNCC: 3 | RNVC: 2
XM61789-420: RNCC: 5 | RNVC: 2
13238511-4: RNCC: 5 | RNVC: 2

26 Sep 1979

5975-01-084-6114
Junction Box Cover

010846114
Z41-76-COT-BB: RNCC: 3 | RNVC: 2
M129-57: RNCC: 5 | RNVC: 2
M129-57: RNCC: 5 | RNVC: 9
Z41-76-COT-BB: RNCC: 5 | RNVC: 9

23 Oct 1979

5975-01-090-0802
Electrical Box

010900802
4B69120-104A: RNCC: 3 | RNVC: 2

13 Feb 1980

5975-01-090-8876
Electrical Wall Plate

010908876
WPH26: RNCC: 3 | RNVC: 9
30451: RNCC: 5 | RNVC: 9
1591-WP: RNCC: 5 | RNVC: 9

26 Feb 1980

5975-01-095-1346
Cable Clamp

010951346
648R236G02: RNCC: 3 | RNVC: 2
648R236G02: RNCC: 5 | RNVC: 2

23 May 1980

5975-01-096-8149
Stuffing Tube

010968149
G62634-4-C: RNCC: 3 | RNVC: 2
CN-L0009-004: RNCC: 5 | RNVC: 9
380-10441-2: RNCC: D | RNVC: 9

28 Jun 1980

5975-01-102-1538
Electronic Junction Rack

011021538
C8714-9: RNCC: 3 | RNVC: 2
MBBN3423N9D: RNCC: 5 | RNVC: 2
3 OWE 134491 ISSUE2: RNCC: 5 | RNVC: 2
101747-9: RNCC: 5 | RNVC: 2
CTJ-3D-09: RNCC: 5 | RNVC: 9
C8714-9: RNCC: 7 | RNVC: 2

12 Oct 1980

5975-01-102-8758
Cable Check Adapter

011028758
BH22168: RNCC: 3 | RNVC: 2

30 Oct 1980

5975-01-107-1231
Electrical Box Connector

011071231
15233-DC: RNCC: 3 | RNVC: 2
PWA52665-10: RNCC: 5 | RNVC: 9
L104: RNCC: 5 | RNVC: 9
02900: RNCC: 5 | RNVC: 9

30 Jan 1981

5975-01-110-7686
Electrical Components Tie Down Strap

011107686
PLT2I-C0: RNCC: 3 | RNVC: 1
RT-508-0: RNCC: 3 | RNVC: 2
PLT2I-C0: RNCC: 3 | RNVC: 2
02401759: RNCC: 5 | RNVC: 2
AL-08-40-0-C: RNCC: 5 | RNVC: 2
L-8-40-0-C: RNCC: 5 | RNVC: 2
92220509: RNCC: 5 | RNVC: 2
L-8-40-0: RNCC: 5 | RNVC: 9
02401759: RNCC: 5 | RNVC: 9

5 Apr 1981

5975-01-111-1754
Flexible Nonmetallic Conduit

011111754
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1202: RNCC: 3 | RNVC: 2
M81914/4-1202: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
10150497: RNCC: 6 | RNVC: 9

12 Apr 1981

5975-01-112-6606
Rigid Metal Conduit Assembly

011126606
4B69142-129A: RNCC: 3 | RNVC: 2
4B69142-129A: RNCC: 5 | RNVC: 2

8 May 1981

5975-01-106-2537
Grounding Stick

011062537
141C163G01: RNCC: 3 | RNVC: 2
141C163G01: RNCC: 3 | RNVC: 9
141C163G01: RNCC: 5 | RNVC: 2

14 Jan 1981

5975-01-113-7397
Panel Mounting Rail

011137397
MX70: RNCC: 3 | RNVC: 2

3 Jun 1981

5975-01-115-2914
Electrical Conduit Ferrule

011152914
10-90229-30: RNCC: 3 | RNVC: 2
10-90229-30: RNCC: 5 | RNVC: 9

1 Jul 1981

5975-01-116-7516
Electrical Equipment Cabinet

011167516
CU879: RNCC: 3 | RNVC: 2
CU879HG: RNCC: 5 | RNVC: 9

2 Aug 1981

5975-01-118-8410
Electronic Junction Rack

011188410
M81714/5-8: RNCC: 2 | RNVC: 2
MIL-T-81714/5: RNCC: 4 | RNVC: 1
TJT701009: RNCC: 5 | RNVC: 1
421501-039: RNCC: 5 | RNVC: 1
MRTB-9: RNCC: 5 | RNVC: 1
3602-025-1108: RNCC: 5 | RNVC: 1
101023-9: RNCC: 5 | RNVC: 9
5975PL0963100: RNCC: 6 | RNVC: 9

12 Sep 1981

5975-01-121-6699
Cable Marker Sleeve

011216699
SS7074-415: RNCC: 3 | RNVC: 2
SS7074-415: RNCC: 5 | RNVC: 2

7 Nov 1981

5975-01-124-8860
Electrical Box Connector

011248860
074-01-027: RNCC: 3 | RNVC: 2
10067331-101: RNCC: 5 | RNVC: 2

15 Jan 1982

5975-01-125-8269
Electrical Conductor Bushing

011258269
74B878001-147: RNCC: 1 | RNVC: 2
CT0905-04C: RNCC: 3 | RNVC: 2
74B878001-147: RNCC: 5 | RNVC: 2
CT0905-147: RNCC: 5 | RNVC: 9
10134281: RNCC: 6 | RNVC: 9

1 Feb 1982

5975-01-127-3343
Electrical Components Tie Down Strap

011273343
7000989-1: RNCC: 3 | RNVC: 2

27 Feb 1982

5975-01-128-0155
Electrical Cable Nipple

011280155
40N171-5S: RNCC: 3 | RNVC: 9
40N171-5S: RNCC: C | RNVC: 1

11 Mar 1982

5975-01-130-8496
Electrical-Electronic Equipment Chassis

011308496
641-4263-004: RNCC: 3 | RNVC: 2

29 Apr 1982

5975-01-134-5302
Convolute Reinforcement

011345302
CRN1137-9: RNCC: 3 | RNVC: 2
ST5M1570-009: RNCC: 5 | RNVC: 2

5 Jul 1982

5975-01-141-1535
Guy Clamp

011411535
J930: RNCC: 3 | RNVC: 2

24 Oct 1982

5975-01-143-1269
Junction Box Assembly

011431269
287508: RNCC: 3 | RNVC: 2

27 Nov 1982

5975-01-143-4800
Rigid Metal Conduit

011434800
0550010000: RNCC: 3 | RNVC: 2
7126K1: RNCC: 5 | RNVC: 2

4 Dec 1982

5975-01-152-1951
Electrical Box Connector

011521951
3307: RNCC: 3 | RNVC: 2
909: RNCC: 5 | RNVC: 9
43783: RNCC: E | RNVC: 8
127-0312-005: RNCC: E | RNVC: 8
02904: RNCC: E | RNVC: 8
676: RNCC: E | RNVC: 8

28 Apr 1983

5975-01-152-2635
Junction Box Cover

011522635
2225890: RNCC: 3 | RNVC: 2
2BD721: RNCC: 5 | RNVC: 9
2225890: RNCC: 5 | RNVC: 9
45B008-P2: RNCC: 5 | RNVC: 9

29 Apr 1983

5975-01-159-4131
Blank Panel

011594131
872480-T1: RNCC: 3 | RNVC: 2
803517 PIECE 305: RNCC: 5 | RNVC: 9

8 Aug 1983

5975-01-159-6137
Electrical Conduit Bushing

011596137
BU400I: RNCC: 3 | RNVC: 2
1231: RNCC: 5 | RNVC: 2
IBC-400: RNCC: 5 | RNVC: 9

11 Aug 1983

5975-01-184-5831
Conduit Outlet

011845831
LB-75-M: RNCC: 3 | RNVC: 2
LB-75: RNCC: 5 | RNVC: 9
LB75-M: RNCC: 5 | RNVC: 9
LB28F0RM8: RNCC: E | RNVC: 8

20 Jul 1984

5975-01-184-5833
Conduit Outlet

011845833
LB125-M: RNCC: 3 | RNVC: 2
LB125-M: RNCC: 5 | RNVC: 9

20 Jul 1984

5975-01-188-7880
Electrical-Electronic Equipment Chassis

011887880
12325430: RNCC: 3 | RNVC: 2

7 Sep 1984

5975-01-189-6874
Conduit Outlet Cover

011896874
K100: RNCC: 3 | RNVC: 2
K100: RNCC: 5 | RNVC: 9

19 Sep 1984

5975-01-190-4816
Guide Rail

011904816
7681-56030-706: RNCC: 1 | RNVC: 2
CTJ120E01B-513: RNCC: 3 | RNVC: 2
7681-56030-706: RNCC: 5 | RNVC: 9
CTJ120E01B-6162: RNCC: C | RNVC: 1

27 Sep 1984

5975-01-191-1693
Electrical Components Tie Down Strap

011911693
320-4-45549-101: RNCC: 3 | RNVC: 2
5975PL1789141: RNCC: 6 | RNVC: 9

6 Oct 1984

5975-01-192-8694
Junction Box

011928694
A404CHNF: RNCC: 3 | RNVC: 2
AB-443JFN: RNCC: 5 | RNVC: 2

26 Oct 1984

5975-01-163-5976
Blank Panel

011635976
824990-T1: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-01-164-3739
Electrical Conduit Locknut

011643739
LD482-0049-0001: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-164-9437
Electrical Conduit Locknut

011649437
SL1: RNCC: 3 | RNVC: 9
SL1: RNCC: 5 | RNVC: 2
924J626 ITEM 13: RNCC: 5 | RNVC: 9
64-2494-0001: RNCC: C | RNVC: 1

22 Oct 1983

5975-01-171-7048
Junction Box

011717048
A12106CHAL: RNCC: 3 | RNVC: 2
AB12106: RNCC: 5 | RNVC: 9
E1206: RNCC: 5 | RNVC: 9

11 Feb 1984

5975-01-173-8786
Blank Panel

011738786
A16P14AL: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-173-9577
Blank Panel

011739577
A14P12AL: RNCC: 3 | RNVC: 2

13 Mar 1984

5975-01-174-7291
Electrical Cable Nipple

011747291
205402-3: RNCC: 3 | RNVC: 2
5M2117-003: RNCC: 5 | RNVC: 9
10134283: RNCC: 6 | RNVC: 9

22 Mar 1984

5975-01-175-0932
Blank Panel

011750932
806314 PIECE 311: RNCC: 3 | RNVC: 2
N110-A: RNCC: 5 | RNVC: 9

27 Mar 1984

5975-01-176-1392
Electrical Conduit Bend

011761392
12275345: RNCC: 3 | RNVC: 2

8 Apr 1984

5975-01-198-5615
Junction Box

011985615
A606CHNFSS: RNCC: 3 | RNVC: 2
AB-664JHFX: RNCC: 3 | RNVC: 2
A606CHNFFSS: RNCC: 5 | RNVC: 9
E-606CHNFSS: RNCC: 5 | RNVC: 9

10 Jan 1985

NSN 5975-01-209-5753 012095753 FLOOR RUNNER,STATIC

5975-01-209-5753
Static Floor Runner

012095753
5046-400-40FT.PUTTY: RNCC: 3 | RNVC: 2
SM0440-BR: RNCC: 5 | RNVC: 9
8200: RNCC: 5 | RNVC: 9
WS 7553-G: RNCC: 5 | RNVC: 9
8200: RNCC: 5 | RNVC: 9
8291: RNCC: 5 | RNVC: 9
8200,4X40FT.,GOLD: RNCC: 5 | RNVC: 9
8291: RNCC: 5 | RNVC: 9
8291: RNCC: C | RNVC: 1

1 Jun 1985

5975-01-210-5079
Electric Ground Plate

012105079
L5416065-003: RNCC: 3 | RNVC: 2
L5416065-003: RNCC: 5 | RNVC: 2

13 Jun 1985

5975-01-224-0207
Support

012240207
618-4443-001: RNCC: 3 | RNVC: 2

11 Jan 1986

5975-01-224-8225
Electrical Nonmetallic Conduit Assembly

012248225
6006T58P02: RNCC: 1 | RNVC: 2
600326: RNCC: 3 | RNVC: 9
6006T58P02: RNCC: 5 | RNVC: 1
6006T58P02: RNCC: 5 | RNVC: 2

23 Jan 1986

5975-01-226-9612
Junction Box

012269612
A-1614CH: RNCC: 3 | RNVC: 2
PB HC 16X14X6 JIC: RNCC: 5 | RNVC: 2
AB-16146JH: RNCC: 5 | RNVC: 2
E-1614CH: RNCC: 5 | RNVC: 9

26 Feb 1986

5975-01-229-1714
Electrical Conduit Adapter

012291714
E943J: RNCC: 3 | RNVC: 9
E943J: RNCC: 5 | RNVC: 2
E943J: RNCC: 5 | RNVC: 2
00034481062066: RNCC: 5 | RNVC: 9

27 Mar 1986

5975-01-231-7745
Electrical Components Tie Down Strap

012317745
RTE2100UV: RNCC: 3 | RNVC: 2
PLT5EH-C0: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-232-1007
Junction Box

012321007
2-198-1-00119: RNCC: 3 | RNVC: 2
2CD568: RNCC: 5 | RNVC: 2
2CD568: RNCC: 5 | RNVC: 9

8 May 1986

5975-01-234-8001
Electrical Components Tie Down Strap

012348001
1062: RNCC: 3 | RNVC: 9
1062: RNCC: 5 | RNVC: 2

19 Jun 1986

5975-01-239-9867
Conduit Outlet

012399867
5335-0: RNCC: 3 | RNVC: 2
30239: RNCC: 5 | RNVC: 2
B242L: RNCC: 5 | RNVC: 9
5335: RNCC: 5 | RNVC: 9
276-4L: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-248-6223
Electrical Conductor Bushing

012486223
2086(BLACK)SB-687-9: RNCC: 3 | RNVC: 2
1409720: RNCC: 5 | RNVC: 2
1409720: RNCC: 7 | RNVC: 9

28 Jan 1987

5975-01-248-7077
Flexible Nonmetallic Conduit

012487077
PAC M1889004: RNCC: 3 | RNVC: 2
48-2217-050: RNCC: 5 | RNVC: 9
68237-R: RNCC: 5 | RNVC: 9

30 Jan 1987

5975-01-246-5308
Electrical Conduit Coupling Nut

012465308
BACN10WW10A1: RNCC: 3 | RNVC: 2
180042-FJ0100: RNCC: 5 | RNVC: 2
BACN10WW10A: RNCC: 5 | RNVC: 9

14 Dec 1986

5975-01-249-7234
Stuffing Tube

012497234
M24235/13-004: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-250-1765
Junction Box

012501765
FD-1-50: RNCC: 3 | RNVC: 2

26 Feb 1987

5975-01-251-1486
Electrical Components Tie Down Strap

012511486
PLT1M-C0: RNCC: 3 | RNVC: 2

13 Mar 1987

5975-01-252-3250
Junction Box

012523250
081-076-01: RNCC: 3 | RNVC: 2
081-076-00: RNCC: 5 | RNVC: 9

1 Apr 1987

5975-01-250-4764
Stuffing Tube

012504764
M24235/13-012: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-232-3615
Electrical Components Tie Down Strap

012323615
11450911-9: RNCC: 3 | RNVC: 2
11450911-9: RNCC: 5 | RNVC: 1
11450911-9: RNCC: 5 | RNVC: 1

12 May 1986

5975-01-254-1636
Electrical Nonmetallic Conduit Assembly

012541636
R58HB06F36W024D: RNCC: 3 | RNVC: 2
R58HB06F36W024D: RNCC: 5 | RNVC: 9

2 May 1987

5975-01-254-7891
Stuffing Tube

012547891
CT01485: RNCC: 3 | RNVC: 2
LE482-0079-0001: RNCC: 5 | RNVC: 2

10 May 1987

5975-01-257-1056
Junction Box

012571056
BI-3-L59: RNCC: 3 | RNVC: 2
GJ800AU1L: RNCC: 5 | RNVC: 2

12 Jun 1987

5975-01-210-8091
Electrical Nonmetallic Conduit Assembly

012108091
R58HB16D33W006D: RNCC: 3 | RNVC: 1
R58HB16D33W006D: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Jun 1985

5975-01-210-8101
Electrical Nonmetallic Conduit Assembly

012108101
R58HB16F36W006D: RNCC: 3 | RNVC: 1
R58HB16F36W006D: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

18 Jun 1985

5975-01-210-8112
Electrical Nonmetallic Conduit Assembly

012108112
R58HB16K16Y096F: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-212-5767
Junction Box

012125767
A1614CHAL: RNCC: 3 | RNVC: 2
AB-16146JHA: RNCC: 5 | RNVC: 2

14 Jul 1985

5975-01-214-1356
Flexible Metal Conduit

012141356
023700-HP0750: RNCC: 3 | RNVC: 2
SM83-06: RNCC: 5 | RNVC: 9
750-084-24: RNCC: 5 | RNVC: 9
SM83-06C: RNCC: 5 | RNVC: 9
71350-75-31: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-214-1357
Flexible Metal Conduit

012141357
750-084-32: RNCC: 3 | RNVC: 2
71350-100-31: RNCC: 5 | RNVC: 2
SM83-08: RNCC: 5 | RNVC: 2
023700-HP1000: RNCC: 5 | RNVC: 2
SM83-08: RNCC: 5 | RNVC: 9
023700-HE1000: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-256-9020
Electrical Box Connector

012569020
AA50553-1-1-X-2-02-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
ST-2: RNCC: E | RNVC: 8
11176200: RNCC: E | RNVC: 8
11176200-1: RNCC: E | RNVC: 8

9 Jun 1987

5975-01-258-6231
Electrical Nonmetallic Conduit Assembly

012586231
K58H0005-1: RNCC: 3 | RNVC: 2
K58H0005-1: RNCC: 5 | RNVC: 2
K58H0005-1: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-220-5996
Rod Assembly

012205996
4900-5131: RNCC: 3 | RNVC: 2
B889100131: RNCC: 5 | RNVC: 9
175B618002-131: RNCC: 7 | RNVC: 2

16 Nov 1985

5975-01-262-5788
Electrical Tie Down Mounting Base

012625788
ASMS-A-X: RNCC: 3 | RNVC: 2
ASMS-A: RNCC: 5 | RNVC: 1

31 Aug 1987

5975-01-264-6639
Cable Hanger

012646639
CL-1-C-5.00: RNCC: 3 | RNVC: 2

5 Oct 1987

5975-01-263-8407
Cable Marker Sleeve

012638407
10054747-804: RNCC: 3 | RNVC: 9

20 Sep 1987

5975-01-264-6754
Electrical Components Tie Down Strap

012646754
SSC4H-S25: RNCC: 3 | RNVC: 2
84-14037: RNCC: 7 | RNVC: 2

5 Oct 1987

5975-01-268-1529
Electrical Cable Nipple

012681529
202D153-25: RNCC: 3 | RNVC: 2

23 Nov 1987

5975-01-269-4356
Electrical Conduit Adapter

012694356
2604-112 TY9: RNCC: 3 | RNVC: 1

16 Dec 1987

5975-01-269-4932
Electrical Equipment Mounting Base

012694932
297-44: RNCC: 3 | RNVC: 2

17 Dec 1987

5975-01-223-6020
Electrical Conduit Adapter

012236020
7000-718-125K000: RNCC: 3 | RNVC: 2
RP2100 SERIES STEEL1.250: RNCC: 5 | RNVC: 1
RP2100-F10-S: RNCC: 5 | RNVC: 1
RP2100-EM10-S: RNCC: 5 | RNVC: 2
S82100-8M10-S: RNCC: 5 | RNVC: 2
200701-FE5110: RNCC: 5 | RNVC: 2
S82100-EM10-S: RNCC: 5 | RNVC: 9
RP2100-G10-S: RNCC: 5 | RNVC: 9

3 Jan 1986

5975-01-272-3692
Blank Panel

012723692
13250584: RNCC: 3 | RNVC: 2
13250584: RNCC: 5 | RNVC: 1

8 Feb 1988

5975-01-272-8488
Stuffing Tube

012728488
M19622/1-002: RNCC: 3 | RNVC: 2
MIL-S-19622/1: RNCC: 4 | RNVC: 1
2334C: RNCC: 5 | RNVC: 2
1976159 ITEM 11: RNCC: 5 | RNVC: 9
M19622/1-002: RNCC: C | RNVC: 1

16 Feb 1988

5975-01-275-6145
Electrical Conduit Adapter

012756145
CC1046-1: RNCC: 3 | RNVC: 2
7000-430-16-D2: RNCC: 3 | RNVC: 2
3255220-1: RNCC: 5 | RNVC: 9
3255220-1: RNCC: 7 | RNVC: 2

23 Mar 1988

5975-01-276-5220
Electrical Cable Protector

012765220
12354872: RNCC: 3 | RNVC: 2

9 Apr 1988

5975-01-277-7854
Electrical Equipment Mounting Base

012777854
A3046238: RNCC: 3 | RNVC: 2

27 Apr 1988

5975-01-280-0399
Electrical Box Connector

012800399
040-2535: RNCC: 3 | RNVC: 2
505419: RNCC: 5 | RNVC: 9
505419-55: RNCC: 5 | RNVC: 9

29 May 1988

5975-01-280-3323
Conduit Outlet

012803323
LB125-A: RNCC: 3 | RNVC: 2
T12617957 PC40: RNCC: 5 | RNVC: 9
T12617957 PC40: RNCC: C | RNVC: 1

8 Jun 1988

5975-01-281-1181
Electrical Cable Nipple

012811181
317-1397-000: RNCC: 3 | RNVC: 2
7-172-000020: RNCC: 5 | RNVC: 1
10652267-002: RNCC: 5 | RNVC: 2
317-1397-000: RNCC: 5 | RNVC: 9

17 Jun 1988

5975-01-281-6016
Junction Box

012816016
A1614NFSS: RNCC: 3 | RNVC: 2
E-1614NFSS: RNCC: 5 | RNVC: 9
1614NFSS: RNCC: C | RNVC: 1

28 Jun 1988

5975-01-214-4577
Electrical Box Connector

012144577
3231: RNCC: 3 | RNVC: 2

12 Aug 1985

5975-01-219-5735
Cable Hanger

012195735
441366-3: RNCC: 3 | RNVC: 2
441366-3: RNCC: 3 | RNVC: 9
441366-3: RNCC: 5 | RNVC: 2

29 Oct 1985

5975-01-260-7962
Electrical Conduit Adapter

012607962
S2182F1237-1-12C: RNCC: 3 | RNVC: 2
GA801HL15F12CA: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-060-0535
Cable Clamp

010600535
1811652-6: RNCC: 3 | RNVC: 2
021-1000: RNCC: 3 | RNVC: 9
1063108-7: RNCC: 5 | RNVC: 2
1063108-7: RNCC: 5 | RNVC: 2
1063108-7: RNCC: 5 | RNVC: 9
1811652-6 03956: RNCC: 7 | RNVC: 2

6 May 1978

5975-01-075-0568
Electrical Box

010750568
4B69121-115A: RNCC: 3 | RNVC: 2

12 Apr 1979

Load More Results