What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 94 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 94 of 176

5975-01-354-7378
Fanning Strip

013547378
3332877-1: RNCC: 3 | RNVC: 2
3332877-1: RNCC: 5 | RNVC: 2

5 Mar 1992

5975-01-355-7891
Stuffing Tube

013557891
NCGB1231-SG: RNCC: 3 | RNVC: 2
13229E0738-6: RNCC: 7 | RNVC: 2

24 Mar 1992

5975-01-355-9666
Electrical Equipment Mounting Base

013559666
UT21405-80: RNCC: 3 | RNVC: 2
GM500BD2: RNCC: 5 | RNVC: 2

27 Mar 1992

5975-01-360-4323
Blank Panel

013604323
9M381B2E: RNCC: 3 | RNVC: 2
9M381B2E: RNCC: 3 | RNVC: 9

24 Jun 1992

5975-01-362-3181
Electrical Components Tie Down Strap

013623181
SST1MM: RNCC: 3 | RNVC: 2

4 Aug 1992

5975-01-362-7149
Electrical Equipment Rack

013627149
CTJ-3A-05: RNCC: 3 | RNVC: 2

14 Aug 1992

5975-01-367-8657
Electrical Conduit Coupling

013678657
E940N: RNCC: 3 | RNVC: 2
E940N: RNCC: 5 | RNVC: 9
00034481061106: RNCC: 5 | RNVC: 9

20 Nov 1992

5975-01-367-7565
Electrical Tie Down Mounting Base

013677565
STBP19H1: RNCC: 3 | RNVC: 2
STBP19H1: RNCC: 5 | RNVC: 9

18 Nov 1992

5975-01-371-8284
Electrical Components Tie Down Strap

013718284
20941: RNCC: 1 | RNVC: 2
PLC2S-S6-C0: RNCC: 3 | RNVC: 2
71-2739921-1: RNCC: 5 | RNVC: 2
PLC2S-S6-C0: RNCC: 5 | RNVC: 2

24 Feb 1993

5975-01-376-1926
Electrical Cable Protector

013761926
12382143: RNCC: 3 | RNVC: 2

28 May 1993

5975-01-381-2375
Electrical-Electronic Equipment Chassis

013812375
34-081250-02: RNCC: 3 | RNVC: 2
34-081250-02: RNCC: 3 | RNVC: 9

12 Oct 1993

5975-01-385-7650
Flexible Nonmetallic Conduit

013857650
HCTE-1000-0-SP: RNCC: 3 | RNVC: 2
HCTE-1000-0: RNCC: 5 | RNVC: 9

18 Jan 1994

5975-01-383-6489
Electrical Equipment Foot

013836489
1328AS226: RNCC: 3 | RNVC: 2

27 Nov 1993

5975-01-385-9692
Electrical Equipment Shelf

013859692
12383932: RNCC: 3 | RNVC: 2

25 Jan 1994

5975-01-387-4448
Flexible Metal Conduit Assembly

013874448
57350-16FTOIN: RNCC: 3 | RNVC: 2
57350-16: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-4529
Cable Strain Relief Bushing

013874529
5267493: RNCC: 3 | RNVC: 2
9004420: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-6253
Cable Insert Special Block

013876253
RM 20/15: RNCC: 3 | RNVC: 2
RM 20/15: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-391-1964
Junction Box

013911964
3113AS800-1: RNCC: 3 | RNVC: 2

7 Jun 1994

5975-01-326-1681
Ground Rod

013261681
1135515G1: RNCC: 3 | RNVC: 9
A-A-55804: RNCC: 4 | RNVC: 1
W-R-550A: RNCC: 5 | RNVC: 9

20 Sep 1990

5975-01-326-1294
Wire Strand Hanger Support And Safety Strap

013261294
11468631: RNCC: 3 | RNVC: 2

18 Sep 1990

5975-01-326-6511
Cable Shield Adapter

013266511
GA/CSGA-D/NPT: RNCC: 3 | RNVC: 2
SEEPA-NF-D-A: RNCC: 5 | RNVC: 2
CSGA-D/NPT: RNCC: 5 | RNVC: 2
CSGA-D/NPT: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-327-0018
Electrical Bonding Ring

013270018
260403-2: RNCC: 3 | RNVC: 2

5 Oct 1990

5975-01-334-0999
Interconnecting Box

013340999
70550-02128-043: RNCC: 1 | RNVC: 2
AW2876-43: RNCC: 3 | RNVC: 2
AW2876-043: RNCC: 3 | RNVC: 9
70550-02128-041: RNCC: E | RNVC: 8
AW2876: RNCC: E | RNVC: 8

15 Feb 1991

5975-01-335-1963
Electrical Equipment Cabinet

013351963
A16H1206ALLP: RNCC: 3 | RNVC: 2

6 Mar 1991

5975-01-336-5447
Blank Panel

013365447
9905-UH60-007: RNCC: 3 | RNVC: 2

27 Mar 1991

5975-01-337-9439
Junction Box

013379439
CV 863: RNCC: 3 | RNVC: 9

24 Apr 1991

5975-01-339-7469
Electrical Equipment Mounting Base

013397469
70600-81842-102: RNCC: 1 | RNVC: 2
4538: RNCC: 3 | RNVC: 2

29 May 1991

5975-01-341-3151
Rigid Metal Conduit Assembly

013413151
23A00025: RNCC: 3 | RNVC: 2
253112: RNCC: 5 | RNVC: 2

27 Jun 1991

5975-01-392-7347
Electrical-Electronic Equipment Chassis

013927347
MZR052: RNCC: 3 | RNVC: 2
C005975-02: RNCC: 7 | RNVC: 2

6 Jul 1994

5975-01-407-5585
Switch Terminal Cover

014075585
9325C08-1583-01: RNCC: 3 | RNVC: 2
5728B: RNCC: 3 | RNVC: 9

31 Jan 1995

5975-01-410-7647
Flexible Nonmetallic Conduit

014107647
27214: RNCC: 3 | RNVC: 2
68764-R: RNCC: 5 | RNVC: 2
NGF1000: RNCC: 5 | RNVC: 9
1709AS886-06: RNCC: 7 | RNVC: 2
1709AS886: RNCC: D | RNVC: 9

11 Mar 1995

5975-01-412-5780
Electrical Cable Splice Protector

014125780
12932263: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-414-6995
Electrical Wall Plate

014146995
4510D: RNCC: 3 | RNVC: 2
GFRWPV: RNCC: 5 | RNVC: 9

13 Jun 1995

5975-01-420-2605
Electrical Components Tie Down Strap

014202605
44407: RNCC: 3 | RNVC: 2
YB-24473: RNCC: 5 | RNVC: 9

12 Oct 1995

5975-01-421-5902
Nonmetallic Raceway

014215902
FS4X1.5LG6/C4LG6: RNCC: 3 | RNVC: 2
S4X1.5LG6: RNCC: 5 | RNVC: 9
FS4X1.5LG6: RNCC: 5 | RNVC: 9

10 Nov 1995

5975-01-422-2789
Cable Hanger

014222789
101-107-316: RNCC: 3 | RNVC: 2
5975PL1285673: RNCC: 6 | RNVC: 9

28 Nov 1995

5975-01-428-9998
Electrical Equipment Mounting Base

014289998
800941-1: RNCC: 3 | RNVC: 2
MT-7077: RNCC: 5 | RNVC: 1
800941: RNCC: 5 | RNVC: 2
800941-0001: RNCC: 5 | RNVC: 2

4 Apr 1996

5975-01-431-2113
Electrical-Electronic Equipment Chassis

014312113
410 113 111: RNCC: 3 | RNVC: 2
117360003: RNCC: 5 | RNVC: 9
0821191-01: RNCC: 5 | RNVC: 9
117360003: RNCC: 5 | RNVC: 9
117360003: RNCC: 5 | RNVC: 9

9 May 1996

5975-01-432-4124
Conduit Outlet

014324124
11B254101: RNCC: 3 | RNVC: 1
5387-0: RNCC: 3 | RNVC: 2

5 Jun 1996

5975-01-438-0428
Flexible Nonmetallic Conduit

014380428
57350-85FT 0IN: RNCC: 3 | RNVC: 2
57350-85: RNCC: 5 | RNVC: 9

30 Oct 1996

5975-01-432-4122
Electrical Conduit Elbow

014324122
3442: RNCC: 3 | RNVC: 2
11B254120: RNCC: 3 | RNVC: 9
3442: RNCC: 5 | RNVC: 9

5 Jun 1996

5975-01-434-1760
Electrical Nonmetallic Conduit Assembly

014341760
R58HB12G16Y012C: RNCC: 3 | RNVC: 2
R58HB12G16Y012C: RNCC: 5 | RNVC: 2
R58HB12G16Y012C: RNCC: 5 | RNVC: 2
R58HB12G16Y012C: RNCC: 5 | RNVC: 9
R58HB12G16Y012C: RNCC: 7 | RNVC: 2

22 Jul 1996

5975-01-434-7981
Junction Box

014347981
153B1010G01: RNCC: 3 | RNVC: 2

7 Aug 1996

5975-01-435-1449
Flexible Metal Conduit

014351449
M24758/1-04: RNCC: 2 | RNVC: 2
MIL-PRF-24758: RNCC: 4 | RNVC: 1
MIL-C-24758/1: RNCC: 5 | RNVC: 9

15 Aug 1996

5975-01-448-4534
Cable Hanger

014484534
101-107-458: RNCC: 3 | RNVC: 2
CRES 316 2.5 IN. LG BAR: RNCC: 3 | RNVC: 2

29 Aug 1997

5975-01-449-3487
Electrical Conduit Coupling

014493487
000 159 23 25: RNCC: 3 | RNVC: 2
0001592325: RNCC: 5 | RNVC: 2
0001592325: RNCC: 5 | RNVC: 2
000 159 23 25: RNCC: 5 | RNVC: 2

28 Sep 1997

5975-01-448-0618
Electrical-Electronic Equipment Chassis

014480618
A3103997: RNCC: 3 | RNVC: 2

20 Aug 1997

5975-01-453-3994
Electrical Nonmetallic Conduit Assembly

014533994
1328AS620: RNCC: 3 | RNVC: 2
1328AS620-4: RNCC: 5 | RNVC: 2

27 Feb 1998

5975-01-455-1287
Electronic Equipment Mounting Tray

014551287
3036AS380: RNCC: 3 | RNVC: 2
3036AS380: RNCC: 5 | RNVC: 1

23 Apr 1998

5975-01-454-4721
Electrical Cable Protector

014544721
585-6405226-42: RNCC: 3 | RNVC: 2
211075130: RNCC: 3 | RNVC: 2

1 Apr 1998

5975-01-449-7245
Electrical Equipment Mounting Base

014497245
822-0958-001: RNCC: 3 | RNVC: 2
822-0958-001: RNCC: 5 | RNVC: 2

10 Oct 1997

5975-01-461-7571
Stuffing Tube

014617571
M24235/15-003: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-7610
Stuffing Tube

014617610
M24235/15-013: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-7593
Stuffing Tube

014617593
M24235/15-008: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-9514
Rigid Metal Conduit

014619514
12437388: RNCC: 3 | RNVC: 2

13 Jan 1999

5975-01-462-0626
Electrical Nonmetallic Conduit Assembly

014620626
200AS349-040JG10040GA094: RNCC: 3 | RNVC: 2
200AS349-040JG10040GA094: RNCC: 5 | RNVC: 2

20 Jan 1999

5975-01-462-1789
Stuffing Tube

014621789
MIL-S-24235: RNCC: 4 | RNVC: 1
M24235/14-130: RNCC: 5 | RNVC: 2
RO0036B: RNCC: 5 | RNVC: 9
RO0036A: RNCC: 5 | RNVC: 9
RO0036: RNCC: 5 | RNVC: 9

25 Jan 1999

5975-01-462-7221
Stuffing Tube

014627221
1945.2 SIZE B TYPE 66: RNCC: 3 | RNVC: 2
1945.2 SIZE A TYPE 66: RNCC: 5 | RNVC: 9
9000S620274269: RNCC: 5 | RNVC: 9
9000S620274269-112: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7500
Electrical Conduit Adapter

014627500
712S214NF2424-2: RNCC: 3 | RNVC: 2
GA801UR1C24242: RNCC: 5 | RNVC: 2

17 Feb 1999

5975-01-299-6326
Junction Box

012996326
10945044: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-342-8328
Cable Hanger

013428328
302-6674620PC11: RNCC: 3 | RNVC: 1
185669TY3-A-9: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-436-2748
Electrical Conductor Bushing

014362748
1741AS730-1: RNCC: 3 | RNVC: 2
1741AS730-1: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-444-1974
Metallic Raceway Assembly

014441974
901-011-212-101: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-444-3424
Electrical Conduit Coupling

014443424
025-09412-000: RNCC: 3 | RNVC: 2
376-80783-000A ITEM 126: RNCC: 5 | RNVC: 9
025-09412: RNCC: 5 | RNVC: 9
376-80783-000: RNCC: D | RNVC: 9

5 May 1997

5975-01-444-8280
Flexible Nonmetallic Conduit

014448280
63A155251P49: RNCC: 3 | RNVC: 2
120-100-1-1-20BE: RNCC: 5 | RNVC: 2
E22001A-000000: RNCC: 5 | RNVC: 2

16 May 1997

5975-01-447-9185
Electrical Equipment Shelf

014479185
A3104088: RNCC: 3 | RNVC: 2
A3014011: RNCC: 5 | RNVC: 2

16 Aug 1997

5975-01-283-6398
Electrical-Electronic Equipment Panel

012836398
25472-1: RNCC: 3 | RNVC: 2

10 Aug 1988

5975-01-285-0223
Junction Box

012850223
CU-2100B: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-285-4621
Flexible Metal Conduit Assembly

012854621
23A00974-00010: RNCC: 3 | RNVC: 2
CA-00134-10: RNCC: 3 | RNVC: 2
252485-0010: RNCC: 5 | RNVC: 2
SCD51990783-010: RNCC: 5 | RNVC: 9
CA-00134-10: RNCC: 5 | RNVC: 9

14 Sep 1988

5975-01-285-0301
Electrical-Electronic Equipment Panel

012850301
7222825-01: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-285-0581
Electrical Conductor Bushing

012850581
407-43613-2: RNCC: 3 | RNVC: 2

5 Sep 1988

5975-01-285-7321
Electrical Conduit Adapter

012857321
000214261611: RNCC: 3 | RNVC: 2
9-333-101464: RNCC: 5 | RNVC: 1

20 Sep 1988

5975-01-285-7320
Electrical Conduit Adapter

012857320
000214261311: RNCC: 3 | RNVC: 2
9-333-101462: RNCC: 5 | RNVC: 2

20 Sep 1988

5975-01-287-9942
Wireway

012879942
F44L36: RNCC: 3 | RNVC: 2

30 Oct 1988

5975-01-292-5104
Electrical Box Connector

012925104
J1212M212A75-1F-10N: RNCC: 3 | RNVC: 2
GH805FW100: RNCC: 7 | RNVC: 2

18 Jan 1989

5975-01-294-7403
Cable Hanger

012947403
11464625: RNCC: 3 | RNVC: 2
11464625: RNCC: 5 | RNVC: 1

22 Feb 1989

5975-01-296-7094
Fanning Strip

012967094
7517533-22: RNCC: 3 | RNVC: 9
7517533-22: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7912
Fanning Strip

012967912
7517533-32: RNCC: 3 | RNVC: 2

24 Mar 1989

5975-01-299-2177
Cable Terminal Chamber

012992177
1288002: RNCC: 3 | RNVC: 9
1288002: RNCC: C | RNVC: 1

28 Apr 1989

5975-01-299-4309
Electrical Nonmetallic Conduit Assembly

012994309
R58HB08G36A042: RNCC: 3 | RNVC: 2

1 May 1989

5975-01-301-8611
Electrical Nonmetallic Conduit Assembly

013018611
R58HB04C34A108: RNCC: 3 | RNVC: 2
R58HB04C34A108: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-305-0775
Electrical Conduit Adapter

013050775
100235-0040: RNCC: 3 | RNVC: 2
CH09-0340-440: RNCC: 5 | RNVC: 9
10250710-40: RNCC: 7 | RNVC: 2

1 Aug 1989

5975-01-308-5187
Electrical Conduit Adapter

013085187
A6107S25044N003: RNCC: 3 | RNVC: 2
SE20GR1744AL4: RNCC: 5 | RNVC: 2
4700736-027: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5059
Electrical Box Connector

013085059
CG625OS: RNCC: 3 | RNVC: 2
CG6250S: RNCC: 3 | RNVC: 2
CG6250S: RNCC: 5 | RNVC: 2
CG-6250S: RNCC: 5 | RNVC: 9
HW-E0247-032: RNCC: 7 | RNVC: 2
2552: RNCC: C | RNVC: 1

29 Sep 1989

5975-01-308-7018
Electrical Equipment Shelf

013087018
2017: RNCC: 3 | RNVC: 2

3 Oct 1989

5975-01-311-8622
Strain Electrical Conductor Clamp

013118622
9-61-0010-00: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-313-4766
Electrical Conduit Adapter

013134766
DBZM-5824: RNCC: 3 | RNVC: 2
CG128150: RNCC: 5 | RNVC: 9
1603AS274: RNCC: 7 | RNVC: 1
CG128150: RNCC: C | RNVC: 1

10 Jan 1990

5975-01-314-4522
Electrical Conduit Adapter

013144522
GR2126-EM06: RNCC: 3 | RNVC: 1

30 Jan 1990

5975-01-315-8948
Electrical-Electronic Equipment Chassis

013158948
77-052901-01: RNCC: 3 | RNVC: 2
77-052901-01: RNCC: 5 | RNVC: 2
77-052901-01: RNCC: 5 | RNVC: 9
77-052901-01: RNCC: 5 | RNVC: 9
77-052901-01: RNCC: 5 | RNVC: 9

26 Feb 1990

5975-01-318-4877
Electrical Grounding Plate

013184877
6166788: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-319-5583
Electrical Conduit Adapter

013195583
2613235-8: RNCC: 3 | RNVC: 2
S1816C2502-8: RNCC: 5 | RNVC: 2

10 May 1990

5975-01-315-4471
Electrical Cable Protector

013154471
12370530: RNCC: 3 | RNVC: 2
12353406: RNCC: 5 | RNVC: 9

16 Feb 1990

5975-01-320-1344
Flexible Metal Conduit

013201344
10-90657-74: RNCC: 3 | RNVC: 2

19 May 1990

5975-01-323-1155
Fanning Strip

013231155
74A885647-2003: RNCC: 3 | RNVC: 9
74A885647-2003: RNCC: 5 | RNVC: 2
10134271: RNCC: 6 | RNVC: 9

21 Jul 1990

5975-01-324-9955
Electrical Box Connector

013249955
2692: RNCC: 3 | RNVC: 2
6A418: RNCC: 5 | RNVC: 9

25 Aug 1990

5975-01-342-8323
Cable Hanger

013428323
302-6693690PC29: RNCC: 3 | RNVC: 1
185669TY3,A-16: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-343-2233
Cable Tray

013432233
G382653-1: RNCC: 3 | RNVC: 2
G382653-1: RNCC: 5 | RNVC: 2
G382653-1: RNCC: 5 | RNVC: 9

8 Aug 1991

5975-01-355-0106
Strain Electrical Conductor Clamp

013550106
540-931-001-000: RNCC: 3 | RNVC: 2
540-931-001: RNCC: 5 | RNVC: 9

10 Mar 1992

5975-01-353-6481
Electrical Box Connector

013536481
2540-4: RNCC: 3 | RNVC: 2
2540-4: RNCC: 5 | RNVC: 2
2540-4: RNCC: 5 | RNVC: 2
7-364-001770: RNCC: 5 | RNVC: 9
2HG333: RNCC: C | RNVC: 1

14 Feb 1992

5975-01-345-3207
Conduit Outlet

013453207
420AA001N1001: RNCC: 3 | RNVC: 2
1129E08 ITEM 16: RNCC: 5 | RNVC: 2

17 Sep 1991

5975-01-353-2545
Weather Proof Box

013532545
WB: RNCC: 3 | RNVC: 2
WB: RNCC: 5 | RNVC: 9

8 Feb 1992

5975-01-348-2247
Ground Rod

013482247
A3157032-001: RNCC: 3 | RNVC: 2
A3157032-001: RNCC: 5 | RNVC: 2
A3157032-001: RNCC: 5 | RNVC: 9
A3157032-001: RNCC: 5 | RNVC: 9
A3157032-001: RNCC: 5 | RNVC: 9

6 Nov 1991

5975-01-350-4650
Electronic Junction Rack

013504650
M81714/5-10: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1

17 Dec 1991

5975-01-350-2050
Junction Box

013502050
527A: RNCC: 3 | RNVC: 2
525A: RNCC: 5 | RNVC: 9

12 Dec 1991

5975-01-358-7916
Electrical Components Tie Down Strap

013587916
PLT1M-M69: RNCC: 3 | RNVC: 2

21 May 1992

5975-01-361-8080
Flexible Nonmetallic Conduit

013618080
M1883004: RNCC: 3 | RNVC: 2
M1883004: RNCC: 3 | RNVC: 2
M1883004: RNCC: 5 | RNVC: 2
67587-R: RNCC: 5 | RNVC: 9

26 Jul 1992

5975-01-362-8230
Electrical Conduit Adapter

013628230
101008-21: RNCC: 3 | RNVC: 2
10250710-21: RNCC: 5 | RNVC: 9

15 Aug 1992

5975-01-368-1786
Electrical-Electronic Equipment Chassis

013681786
0000-7157-00: RNCC: 3 | RNVC: 2

27 Nov 1992

5975-01-370-2628
Electrical Components Tie Down Strap

013702628
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-5-6: RNCC: 3 | RNVC: 2
TY524M-6: RNCC: 3 | RNVC: 2
MS3367-5-6: RNCC: 5 | RNVC: 9

16 Jan 1993

5975-01-370-3519
Electrical Equipment Mounting Base

013703519
93023-2: RNCC: 3 | RNVC: 2
93023-2: RNCC: 5 | RNVC: 2

21 Jan 1993

5975-01-372-2388
Electrical Equipment Mounting Base

013722388
169944-01: RNCC: 3 | RNVC: 2
169944-01: RNCC: 5 | RNVC: 9
169944: RNCC: 7 | RNVC: 2

4 Mar 1993

5975-01-379-2296
Electrical Components Tie Down Strap

013792296
PLT1.5I-C: RNCC: 3 | RNVC: 2
10134316: RNCC: 6 | RNVC: 9

29 Aug 1993

5975-01-379-9841
Flexible Metal Conduit Assembly

013799841
57350-30FT 0IN: RNCC: 3 | RNVC: 2
POD-57350-30: RNCC: 5 | RNVC: 2

12 Sep 1993

5975-01-382-7318
Electrical Conduit Union

013827318
P050N-BKA: RNCC: 3 | RNVC: 2
P050N-BK: RNCC: 3 | RNVC: 9
25826-1: RNCC: 7 | RNVC: 2
25826-1: RNCC: 7 | RNVC: 9
25826-1: RNCC: 7 | RNVC: 9

9 Nov 1993

5975-01-387-6270
Roxkit Pack

013876270
ROXKIT: RNCC: 3 | RNVC: 2
ROXKIT: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6289
Top-Packing

013876289
WEDGE 120MM AISI316: RNCC: 3 | RNVC: 2
ARW0001201021: RNCC: 5 | RNVC: 2
ARW0001201021: RNCC: 5 | RNVC: 9
TOP-PACKING SS: RNCC: 5 | RNVC: 9
TOP-PACKING SS: RNCC: 5 | RNVC: 9
WEDGE 120MM SS: RNCC: 5 | RNVC: 9
10051384: RNCC: 6 | RNVC: 9

9 Mar 1994

5975-01-390-3775
Electrical Box Connector

013903775
3702-1: RNCC: 3 | RNVC: 2

18 May 1994

5975-01-325-7635
Shorting Stick

013257635
G166572-2: RNCC: 3 | RNVC: 2
G166572-2: RNCC: 5 | RNVC: 2
G166572-2: RNCC: 5 | RNVC: 9

11 Sep 1990

5975-01-326-4677
Cable Reinforcing Link

013264677
803-5959174 PIECE 105: RNCC: 3 | RNVC: 2

25 Sep 1990

5975-01-327-3944
Cable Channel

013273944
7241541-02: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-330-6643
Electrical Equipment Mounting Base

013306643
70600-81813-101: RNCC: 1 | RNVC: 2
8900699-501: RNCC: 3 | RNVC: 9
MT6523/ASN-150: RNCC: 5 | RNVC: 2
8900699-503: RNCC: C | RNVC: 1
70600-81813-102: RNCC: C | RNVC: 1

6 Dec 1990

5975-01-334-3671
Conduit Outlet

013343671
2IH3-1: RNCC: 3 | RNVC: 2
LT-11: RNCC: 3 | RNVC: 9
LT11-L: RNCC: 5 | RNVC: 9

21 Feb 1991

5975-01-336-7171
Retaining Rod

013367171
87034A1403: RNCC: 3 | RNVC: 9
87034A1403: RNCC: 5 | RNVC: 2

2 Apr 1991

5975-01-336-9865
Rigid Metal Conduit

013369865
A 419 540 70 77: RNCC: 3 | RNVC: 2
MBT A4195407077: RNCC: 5 | RNVC: 9
419 540 70 77: RNCC: 5 | RNVC: 9

7 Apr 1991

5975-01-336-5448
Blank Panel

013365448
9905-UH60-006: RNCC: 3 | RNVC: 2

27 Mar 1991

5975-01-340-0552
Junction Box

013400552
70550-02104-115: RNCC: 3 | RNVC: 2
B-1542-SAC-115: RNCC: 3 | RNVC: 2
70550-02104-115: RNCC: 7 | RNVC: 2

7 Jun 1991

5975-01-341-3117
Electrical Conduit Adapter

013413117
5859502-1: RNCC: 3 | RNVC: 1
72000-150K: RNCC: 3 | RNVC: 2

27 Jun 1991

5975-01-342-1647
Electrical Box Connector

013421647
CGE194: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-387-6292
Roxkit Pack

013876292
ROXKIT SS: RNCC: 3 | RNVC: 2
ROXKIT SS: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-397-1830
Electrical Tie Down Mounting Base

013971830
ABM1M-AT-C: RNCC: 3 | RNVC: 2
ABM1M-AT-C: RNCC: C | RNVC: 1

5 Oct 1994

5975-01-397-7740
Blank Panel

013977740
3313241-1: RNCC: 3 | RNVC: 2
3313241-1: RNCC: 5 | RNVC: 2

20 Oct 1994

5975-01-400-0600
Electrical Conduit Locknut

014000600
2251: RNCC: 3 | RNVC: 2

7 Dec 1994

5975-01-407-5486
Cable Marker Sleeve

014075486
SS7074-1397: RNCC: 3 | RNVC: 2

31 Jan 1995

5975-01-414-7796
Rigid Metal Conduit

014147796
1339AS962-6: RNCC: 3 | RNVC: 2

14 Jun 1995

5975-01-422-6399
Electrical Nonmetallic Conduit Assembly

014226399
R58HB04C18Y018: RNCC: 3 | RNVC: 2
R58HB04C18Y018: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-9666
Cable Guide

014229666
929546-1: RNCC: 3 | RNVC: 2
929546-1: RNCC: 5 | RNVC: 2
929546-1: RNCC: 5 | RNVC: 9

12 Dec 1995

5975-01-436-3618
Junction Box

014363618
A606NFSS: RNCC: 3 | RNVC: 2
1741AS418-2: RNCC: 7 | RNVC: 2
1741AS418: RNCC: D | RNVC: 9

17 Sep 1996

5975-01-436-7763
Junction Box

014367763
70550-02060-047: RNCC: 3 | RNVC: 2

27 Sep 1996

5975-01-433-1493
Electrical Cable Protector

014331493
676-8318-001: RNCC: 3 | RNVC: 2

21 Jun 1996

5975-01-418-6041
Junction Box

014186041
8D00186-1: RNCC: 3 | RNVC: 2
8D00186-1: RNCC: 5 | RNVC: 9

31 Aug 1995

5975-01-440-0773
Electrical Components Tie Down Strap

014400773
TY5275MX: RNCC: 3 | RNVC: 2
3297AS204-2: RNCC: D | RNVC: 9

2 Jan 1997

5975-01-441-7561
Electrical Cable Protector

014417561
89115957-1: RNCC: 3 | RNVC: 9

24 Feb 1997

5975-01-443-4035
Flexible Nonmetallic Conduit

014434035
48-02218-075: RNCC: 3 | RNVC: 2
48-00102-005: RNCC: 5 | RNVC: 9

9 Apr 1997

5975-01-444-2005
Cable Hanger

014442005
320-4-50646-101: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-444-6998
Junction Box

014446998
6816008: RNCC: 3 | RNVC: 2

14 May 1997

5975-01-444-7929
Electrical Equipment Mounting Base

014447929
822-0792-001: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-446-3226
Switch Box Case

014463226
IH3-2-LM: RNCC: 3 | RNVC: 2
T14-L: RNCC: 5 | RNVC: 9

30 Jun 1997

5975-01-448-4536
Cable Hanger

014484536
CRES 316 6.5 IN. LG BAR: RNCC: 3 | RNVC: 1
A-101107462: RNCC: 3 | RNVC: 2
101-107-462: RNCC: 5 | RNVC: 9

29 Aug 1997

5975-01-449-7353
Cable Hanger

014497353
C5078162-1: RNCC: 3 | RNVC: 9

11 Oct 1997

5975-01-450-3453
Electrical Conduit Coupling

014503453
16W195-17: RNCC: 3 | RNVC: 2

4 Nov 1997

5975-01-451-2175
Rigid Metal Conduit Assembly

014512175
68A250649-2071: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-452-6982
Electronic Junction Rack

014526982
DCR-1A-07: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-01-452-7053
Electrical Wall Plate

014527053
WP26V: RNCC: 3 | RNVC: 2
WP26: RNCC: 5 | RNVC: 9
WP26: RNCC: 5 | RNVC: 9

4 Feb 1998

5975-01-453-0105
Flexible Metal Conduit Assembly

014530105
57350-22FT0IN: RNCC: 3 | RNVC: 2
57350-22: RNCC: 5 | RNVC: 9

17 Feb 1998

5975-01-454-5395
Electrical Equipment Mounting Base

014545395
822-1003-001: RNCC: 3 | RNVC: 2

3 Apr 1998

5975-01-456-3634
Electrical-Electronic Equipment Chassis

014563634
3260AS1401: RNCC: 3 | RNVC: 2

10 Jun 1998

5975-01-459-1344
Electrical Components Tie Down Strap

014591344
PL2M2S-L: RNCC: 3 | RNVC: 2

22 Sep 1998

5975-01-458-7811
Electrical Conduit Adapter

014587811
C206AX2423DA: RNCC: 3 | RNVC: 2
3AF316XC2423DA: RNCC: 3 | RNVC: 2
K15K0021-209: RNCC: 5 | RNVC: 9

9 Sep 1998

5975-01-461-7563
Stuffing Tube

014617563
M24235/14-126: RNCC: 2 | RNVC: 2
MIL-T-81714/14: RNCC: 4 | RNVC: 1
LO1572: RNCC: 5 | RNVC: 9
RO0084: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-462-0615
Electrical Nonmetallic Conduit Assembly

014620615
200AS349-040BG04054FA094: RNCC: 3 | RNVC: 2
200AS349-040BG04054FA094: RNCC: 5 | RNVC: 2

20 Jan 1999

5975-01-462-0620
Electrical Nonmetallic Conduit Assembly

014620620
200AS349-941GG06054DA007: RNCC: 3 | RNVC: 2
200AS349-941GG06054DA007: RNCC: 5 | RNVC: 9

20 Jan 1999

5975-01-462-1828
Stuffing Tube

014621828
M24235/14-136: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
LO-014621828: RNCC: 5 | RNVC: 1
RO0085A: RNCC: 5 | RNVC: 9
RO0085: RNCC: 5 | RNVC: 9

25 Jan 1999

5975-01-462-7212
Stuffing Tube

014627212
1945.7 SIZE G TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-117: RNCC: 5 | RNVC: 1
9000S620274269: RNCC: 5 | RNVC: 1
1945.7 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7312
Stuffing Tube

014627312
1990.13 SIZE A TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-153: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-417-3267
Shop Set Installation Electrical Kit

014173267
5705624: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-419-4054
Electrical Box Connector

014194054
420AB001N1401: RNCC: 3 | RNVC: 2

21 Sep 1995

5975-01-360-3695
Electrical Conduit Sealing Fitting

013603695
EYS6: RNCC: 3 | RNVC: 2

23 Jun 1992

5975-01-416-3359
Protection Connector Kit

014163359
6317971: RNCC: 1 | RNVC: 2
HCPS-89: RNCC: 3 | RNVC: 9
6317971-023: RNCC: 5 | RNVC: 2
HCPS-89: RNCC: 5 | RNVC: 9
HCPS-89: RNCC: 5 | RNVC: 9
HCPS-89: RNCC: 5 | RNVC: 9
HCPS-89: RNCC: C | RNVC: 1

17 Jul 1995

5975-01-416-8433
Blank Panel

014168433
66400-013: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-01-424-1016
Electrical Conduit Union

014241016
397S019NF1606A3: RNCC: 3 | RNVC: 2

20 Jan 1996

5975-01-432-5846
Electrical Cable Nipple

014325846
10557073: RNCC: 3 | RNVC: 2
10557073: RNCC: 5 | RNVC: 2

10 Jun 1996

5975-01-437-8377
Electrical Components Tie Down Strap

014378377
1300585: RNCC: 3 | RNVC: 2
7130K53: RNCC: 5 | RNVC: 2

24 Oct 1996

5975-01-436-8705
Flexible Nonmetallic Conduit

014368705
HCTE-0750-0-SP: RNCC: 3 | RNVC: 2
HCTE-0750-0: RNCC: 5 | RNVC: 2
HCTE-0750-0: RNCC: 5 | RNVC: 9

30 Sep 1996

5975-01-430-7114
Cable Collar

014307114
5N-9068: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-439-4147
Electrical Components Tie Down Strap

014394147
PLT2S-C702: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-432-4120
Conduit Outlet

014324120
11B254108: RNCC: 3 | RNVC: 2
5331-0: RNCC: 5 | RNVC: 2

5 Jun 1996

5975-01-432-4125
Electrical Conduit Adapter

014324125
LT75G-SA: RNCC: 3 | RNVC: 2
ZS202: RNCC: 5 | RNVC: 2
11B254124-2: RNCC: 5 | RNVC: 9
4803-1: RNCC: 5 | RNVC: 9

5 Jun 1996

5975-01-286-5850
Electrical Cable Nipple

012865850
8724495: RNCC: 3 | RNVC: 2
8724495: RNCC: 5 | RNVC: 9

5 Oct 1988

5975-01-286-7367
Electrical Cable Nipple

012867367
9G8909: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-288-4757
Electrical Components Tie Down Strap

012884757
11441068-3: RNCC: 1 | RNVC: 2
MS3368-1-8A: RNCC: 3 | RNVC: 2

8 Nov 1988

5975-01-296-6058
Fanning Strip

012966058
7517533-07: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-6060
Fanning Strip

012966060
7517533-09: RNCC: 3 | RNVC: 2
7517533-09: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6069
Fanning Strip

012966069
7517533-18: RNCC: 3 | RNVC: 9
7517533-18: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7105
Flexible Metal Conduit Assembly

012967105
251015-00524: RNCC: 3 | RNVC: 1
750-011NF08-52.5: RNCC: 3 | RNVC: 1
200204-DI0525: RNCC: 3 | RNVC: 1
10250675-34: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7107
Flexible Metal Conduit Assembly

012967107
251017-00352: RNCC: 3 | RNVC: 2
750-011NF16-35.25: RNCC: 3 | RNVC: 2
200206-DI0353: RNCC: 3 | RNVC: 2
10250675-65: RNCC: 7 | RNVC: 2

23 Mar 1989

5975-01-296-7917
Fanning Strip

012967917
7517533-37: RNCC: 3 | RNVC: 9
7517533-37: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-299-7781
Electrical Components Tie Down Strap

012997781
T30MR-0: RNCC: 3 | RNVC: 2
PLC1.5I-S8-0: RNCC: 3 | RNVC: 2
L-5-30 MH-0: RNCC: 3 | RNVC: 2
TY34MX-0: RNCC: 5 | RNVC: 2
TY34MX-0: RNCC: 5 | RNVC: 9
PLC1.5I-S8-C0: RNCC: 5 | RNVC: 9
5594318-B: RNCC: 5 | RNVC: 9

5 May 1989

5975-01-300-4663
Electrical Conduit Elbow

013004663
T1094: RNCC: 3 | RNVC: 2
CRN 3014: RNCC: 3 | RNVC: 2
208466-FB15000A: RNCC: 3 | RNVC: 2
208466-FB6400: RNCC: 5 | RNVC: 9
5190213: RNCC: 7 | RNVC: 2

14 May 1989

5975-01-303-4986
Electrical Box Connector

013034986
31-301-21856-10: RNCC: 3 | RNVC: 2

30 Jun 1989

5975-01-303-1726
Cable Hanger

013031726
6532C422-2: RNCC: 3 | RNVC: 2
6532C422-2: RNCC: 5 | RNVC: 2

26 Jun 1989

5975-01-305-0833
Electronic Junction Rack

013050833
591628-2: RNCC: 3 | RNVC: 2
11437559-2: RNCC: 5 | RNVC: 2
MRTB-3-239: RNCC: 5 | RNVC: 9

1 Aug 1989

5975-01-306-6167
Electrical Equipment Mounting Base

013066167
2850383-2: RNCC: 3 | RNVC: 2
2850383-2: RNCC: 5 | RNVC: 9
2850383-2: RNCC: 5 | RNVC: 9

27 Aug 1989

5975-01-310-4995
Electrical Tie Down Mounting Base

013104995
Z22-0015-001: RNCC: 3 | RNVC: 2
08461: RNCC: 5 | RNVC: 2
71-513365-1: RNCC: 5 | RNVC: 2
15E2906: RNCC: 5 | RNVC: 9
10134308: RNCC: 6 | RNVC: 9

4 Nov 1989

5975-01-311-3774
Electrical-Electronic Equipment Panel

013113774
128-59128-1: RNCC: 3 | RNVC: 2

25 Nov 1989

5975-01-314-4652
Electrical Box Connector

013144652
7119K12: RNCC: 3 | RNVC: 2
7119K12: RNCC: 5 | RNVC: 9

31 Jan 1990

5975-01-316-2892
Electrical-Electronic Equipment Chassis

013162892
5060-7952: RNCC: 3 | RNVC: 2
5060-7952: RNCC: 3 | RNVC: 9
5060-7952: RNCC: 5 | RNVC: 9

8 Mar 1990

5975-01-316-2182
Electrical Conduit Adapter

013162182
J1378-13TS28-2F-34: RNCC: 3 | RNVC: 2

6 Mar 1990

5975-01-318-4718
Ground Rod

013184718
337: RNCC: 3 | RNVC: 2
337: RNCC: 3 | RNVC: 9

19 Apr 1990

5975-01-316-1141
Electrical Cable Protector

013161141
12361760: RNCC: 3 | RNVC: 2

3 Mar 1990

5975-01-319-2562
Electrical Cable Protector

013192562
12910395: RNCC: 3 | RNVC: 2
12910395: RNCC: 5 | RNVC: 2

4 May 1990

5975-01-319-6861
Electrical Conduit Adapter

013196861
2613235-13: RNCC: 3 | RNVC: 2
S1816C3406-8: RNCC: 5 | RNVC: 2

12 May 1990

5975-01-312-0085
Electrical-Electronic Equipment Panel

013120085
496-896-1027-008: RNCC: 3 | RNVC: 2

8 Dec 1989

5975-01-321-5686
Electrical Nonmetallic Conduit Assembly

013215686
R58HA06B33A005: RNCC: 3 | RNVC: 1
R58HA06B33A005: RNCC: 5 | RNVC: 9

20 Jun 1990

5975-01-321-0749
Cable Terminal Chamber

013210749
050519-12A: RNCC: 3 | RNVC: 9
02-270008-312: RNCC: 5 | RNVC: 9
02-270008-312: RNCC: C | RNVC: 1

8 Jun 1990

5975-01-345-6512
Electrical Components Tie Down Strap

013456512
PLT1.5I-M: RNCC: 3 | RNVC: 2
7804987907: RNCC: 5 | RNVC: 2
04056393013000: RNCC: 5 | RNVC: 2

23 Sep 1991

5975-01-345-7703
Electrical Conduit Tee

013457703
952003: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-346-2074
Electrical Bonding Ring

013462074
TRO4AI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
TR014AI-TINEL-LOCK-RING: RNCC: 5 | RNVC: 9
TR04AI: RNCC: 5 | RNVC: 9
5365-009-04AI: RNCC: 5 | RNVC: 9
2873189-101: RNCC: 5 | RNVC: 9

28 Sep 1991

5975-01-347-6404
Electrical Nonmetallic Conduit Assembly

013476404
253569-0020: RNCC: 3 | RNVC: 2
6413117-20: RNCC: 5 | RNVC: 2
6413117-20: RNCC: 7 | RNVC: 2

26 Oct 1991

5975-01-350-6719
Support Assembly

013506719
10370G03: RNCC: 3 | RNVC: 2

20 Dec 1991

5975-01-351-4279
Electrical Receptacle

013514279
GE4102-2: RNCC: 3 | RNVC: 2
5361V: RNCC: 3 | RNVC: 2
5361V: RNCC: 5 | RNVC: 9
5361V-BOX: RNCC: 5 | RNVC: 9

9 Jan 1992

5975-01-353-2176
Electrical Equipment Rack

013532176
12918259: RNCC: 3 | RNVC: 2
12918259: RNCC: 5 | RNVC: 9

7 Feb 1992

5975-01-355-4354
Electrical Box Connector

013554354
470-LT2: RNCC: 3 | RNVC: 9
LT9050A: RNCC: 5 | RNVC: 2

18 Mar 1992

5975-01-356-7806
Electrical Tie Down Mounting Base

013567806
TC5344A: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-357-1562
Electrical-Electronic Equipment Chassis

013571562
12346520: RNCC: 3 | RNVC: 2
12346520: RNCC: D | RNVC: 9

17 Apr 1992

5975-01-357-2027
Electrical Components Tie Down Strap

013572027
SS7034-2797: RNCC: 3 | RNVC: 2

18 Apr 1992

5975-01-360-7086
Cable Hanger

013607086
AS23190/1: RNCC: 3 | RNVC: 1
M23190/1-6: RNCC: 3 | RNVC: 2
AS23190/1: RNCC: 5 | RNVC: 9
M23190/1-6: RNCC: 5 | RNVC: 9
M23190/1-6: RNCC: 5 | RNVC: 9
MIL-S-23190-1: RNCC: 5 | RNVC: 9

29 Jun 1992

5975-01-367-9738
Electrical Components Tie Down Strap

013679738
08-380: RNCC: 3 | RNVC: 2

22 Nov 1992

5975-01-369-3081
Electrical Cable Protector

013693081
12918989: RNCC: 3 | RNVC: 2
12918989: RNCC: 3 | RNVC: 2

19 Dec 1992

5975-01-361-5127
Cable Marker Sleeve

013615127
690-121-006: RNCC: 3 | RNVC: 2

18 Jul 1992

5975-01-362-6388
Cable Terminal Chamber

013626388
8T8566: RNCC: 3 | RNVC: 2
10322889: RNCC: 6 | RNVC: 9

12 Aug 1992

5975-01-378-1089
Flexible Metal Conduit Assembly

013781089
57350-6FT0IN: RNCC: 3 | RNVC: 2
POD-57350-06: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-2320
Stuffing Tube

013782320
637S010NF0412A: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-380-5644
Blank Panel

013805644
176093-0001: RNCC: 3 | RNVC: 2

21 Sep 1993

5975-01-382-0754
Electrical Conduit Ferrule

013820754
SS-FER .125: RNCC: 3 | RNVC: 2
SS-FER-18: RNCC: 3 | RNVC: 2

28 Oct 1993

5975-01-385-0638
Electrical Equipment Drawer

013850638
7594152: RNCC: 3 | RNVC: 2
801-0303: RNCC: 5 | RNVC: 9
DE100I-2: RNCC: 5 | RNVC: 9
DE100I-S: RNCC: 5 | RNVC: 9

3 Jan 1994

5975-01-387-6762
Electrical Equipment Mounting Base

013876762
6450726-1: RNCC: 3 | RNVC: 2
822-0265-001: RNCC: 5 | RNVC: 9
MT-6856/U: RNCC: 5 | RNVC: 9
822-0265-001: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-327-3946
Cable Channel

013273946
7241541-05: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-327-3948
Cable Channel

013273948
7241541-09: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-330-0665
Metallic Raceway Assembly

013300665
366S18010-9: RNCC: 3 | RNVC: 2
3S18010-9: RNCC: 5 | RNVC: 9
5SE00590-1-144: RNCC: 5 | RNVC: 9
5SE00590: RNCC: 7 | RNVC: 2

29 Nov 1990

5975-01-331-5006
Electrical Components Tie Down Strap

013315006
PLT3S-M0: RNCC: 3 | RNVC: 2
155054514: RNCC: 5 | RNVC: 2

20 Dec 1990

5975-01-333-8442
Flexible Metal Conduit Assembly

013338442
11973-0015: RNCC: 3 | RNVC: 2
LE161-0021-0015: RNCC: 7 | RNVC: 2

10 Feb 1991

5975-01-336-2679
Stuffing Tube

013362679
2111007-205: RNCC: 3 | RNVC: 2

21 Mar 1991

5975-01-337-7719
Blank Panel

013377719
74A800782-1005: RNCC: 3 | RNVC: 2
10154472: RNCC: 6 | RNVC: 9

21 Apr 1991

5975-01-338-9149
Electrical-Electronic Equipment Panel

013389149
AT105506: RNCC: 3 | RNVC: 2
AT105506: RNCC: 5 | RNVC: 9

12 May 1991

5975-01-339-5998
Electrical Equipment Mounting Base

013395998
8040004948-1: RNCC: 3 | RNVC: 9

24 May 1991

5975-01-340-8870
Electrical Components Tie Down Strap

013408870
2EL807: RNCC: 3 | RNVC: 2
1-11-2-1: RNCC: 5 | RNVC: 9
2EL807: RNCC: 5 | RNVC: 9
1-11-2-1: RNCC: 5 | RNVC: 9
1-11-2-1: RNCC: 5 | RNVC: 9

20 Jun 1991

5975-01-393-7372
Cable Strain Relief Bushing

013937372
1244: RNCC: 3 | RNVC: 2
30-00154-015: RNCC: 7 | RNVC: 2

26 Jul 1994

5975-01-395-1078
Electrical Bonding Ring

013951078
LS35345-04: RNCC: 3 | RNVC: 2
LS35345-04: RNCC: 5 | RNVC: 2
LS35345-04: RNCC: 5 | RNVC: 2

22 Aug 1994

5975-01-398-6914
Electrical Equipment Mounting Base

013986914
13263: RNCC: 3 | RNVC: 2
13263: RNCC: 5 | RNVC: 2
13263: RNCC: 5 | RNVC: 2

8 Nov 1994

5975-01-399-4129
Electrical Box Connector

013994129
3228: RNCC: 3 | RNVC: 2
GF803AH1: RNCC: 5 | RNVC: 1

24 Nov 1994

5975-01-400-0624
Electrical Box Connector

014000624
3308: RNCC: 3 | RNVC: 2

7 Dec 1994

5975-01-406-1336
Cable Hanger

014061336
101-107-046: RNCC: 3 | RNVC: 2

21 Dec 1994

5975-01-407-8331
Electrical Conduit Adapter

014078331
RP2100-G05-S: RNCC: 3 | RNVC: 2
RP2100-F05-S: RNCC: 3 | RNVC: 2
RP2100-G05-5: RNCC: 5 | RNVC: 9

7 Feb 1995

5975-01-412-0400
Electrical Conduit Adapter

014120400
1058AS1476: RNCC: 3 | RNVC: 2

8 Apr 1995

5975-01-415-2288
Electrical Cable Nipple

014152288
5728-005R: RNCC: 3 | RNVC: 9

22 Jun 1995

5975-01-420-8367
Electrical Equipment Mounting Base

014208367
41858-1: RNCC: 3 | RNVC: 2
10-0188-1: RNCC: 5 | RNVC: 2

26 Oct 1995

5975-01-422-2033
Blank Panel

014222033
5820069G1: RNCC: 3 | RNVC: 2

25 Nov 1995

5975-01-421-9718
Flexible Nonmetallic Conduit

014219718
R-68238: RNCC: 3 | RNVC: 9
12420924-004: RNCC: 5 | RNVC: 2
058NPBS: RNCC: 5 | RNVC: 2
445171C1: RNCC: 5 | RNVC: 2
12420924-004: RNCC: 7 | RNVC: 2
12420924-004: RNCC: 7 | RNVC: 2
R-68238: RNCC: C | RNVC: 1
12420924: RNCC: D | RNVC: 9

17 Nov 1995

5975-01-425-3906
Electrical Conduit Tee

014253906
HM020-900: RNCC: 3 | RNVC: 2

20 Feb 1996

5975-01-425-7593
Flexible Nonmetallic Conduit

014257593
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1005: RNCC: 3 | RNVC: 2
M81914/1-1005: RNCC: 5 | RNVC: 9
4720PL0887481: RNCC: 6 | RNVC: 9

27 Feb 1996

5975-01-438-5121
Junction Box

014385121
680: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-430-7120
Electrical Equipment Mounting Base

014307120
A3168013-2: RNCC: 3 | RNVC: 2
A3168013-2: RNCC: 5 | RNVC: 1

2 May 1996

5975-01-442-5156
Electrical-Electronic Equipment Chassis

014425156
6107-1200-0000: RNCC: 3 | RNVC: 2
1131061N00: RNCC: 5 | RNVC: 2
DE100I-SW: RNCC: 5 | RNVC: 9
DE100I-SW/H: RNCC: 5 | RNVC: 9
6101-1200-0000: RNCC: 5 | RNVC: 9
DE100I-SW: RNCC: 5 | RNVC: 9
DE100I-CSWU2: RNCC: 5 | RNVC: 9
DE100I-SWU2/RH: RNCC: 5 | RNVC: 9

17 Mar 1997

5975-01-443-1074
Electrical Components Tie Down Strap

014431074
279040A24: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-01-443-5554
Junction Box

014435554
F66T24HC: RNCC: 3 | RNVC: 2
F-6624HC: RNCC: 3 | RNVC: 9

12 Apr 1997

5975-01-444-2693
Drawer Cover

014442693
8442C55H06: RNCC: 3 | RNVC: 1

2 May 1997

5975-01-444-7998
Electrical-Electronic Equipment Chassis

014447998
986-4018-001: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8292
Fanning Strip

014448292
65560-09109-101: RNCC: 3 | RNVC: 2
65560-09109-101: RNCC: 5 | RNVC: 2
65560-09109-101: RNCC: 5 | RNVC: 2

16 May 1997

5975-01-446-3502
Flexible Nonmetallic Conduit

014463502
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1108B: RNCC: 3 | RNVC: 2
M81914/5-1108 BLK: RNCC: 5 | RNVC: 9

1 Jul 1997

5975-01-447-9184
Blank Panel

014479184
A3103995: RNCC: 3 | RNVC: 2

16 Aug 1997

5975-01-450-2526
Electronic Junction Rack

014502526
ARMS-N04: RNCC: 3 | RNVC: 2
8027520-1-04: RNCC: 5 | RNVC: 2
ARMS: RNCC: D | RNVC: 9

31 Oct 1997

5975-01-450-6631
Electrical Cable Nipple

014506631
230E3T02: RNCC: 3 | RNVC: 2
230E3T02: RNCC: 3 | RNVC: 9
10607952: RNCC: 5 | RNVC: 2

18 Nov 1997

5975-01-455-3410
Rigid Metal Conduit Assembly

014553410
3260AS436: RNCC: 3 | RNVC: 2
3260AS436: RNCC: 5 | RNVC: 2
3260AS436: RNCC: 7 | RNVC: 2

29 Apr 1998

5975-01-456-1510
Electrical-Electronic Equipment Chassis

014561510
4042860-0502: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-458-1901
Electronic Equipment Mounting Tray

014581901
3063944: RNCC: 3 | RNVC: 2
3063944: RNCC: 5 | RNVC: 9

17 Aug 1998

5975-01-460-8986
Cable Hanger

014608986
S3255SG4: RNCC: 3 | RNVC: 2
3225T22: RNCC: 5 | RNVC: 2

19 Nov 1998

5975-01-461-6964
Stuffing Tube

014616964
MIL-T-81714/14: RNCC: 4 | RNVC: 1
M24235/14-123: RNCC: 5 | RNVC: 2
RO0032B: RNCC: 5 | RNVC: 9
RO0032C: RNCC: 5 | RNVC: 9

28 Dec 1998

5975-01-461-7549
Stuffing Tube

014617549
M24235/14-124: RNCC: 2 | RNVC: 2
RO0046A: RNCC: 5 | RNVC: 9
RO0046: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-461-7570
Stuffing Tube

014617570
M24235/14-128: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
RO0028A: RNCC: 5 | RNVC: 9
MIL-T-81714/14: RNCC: 5 | RNVC: 9
LO1562: RNCC: 5 | RNVC: 9
RO0028: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-462-7218
Stuffing Tube

014627218
1945.9 SIZE K TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-119: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1945.9 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7324
Stuffing Tube

014627324
1990.1 SIZE A TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-141: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-462-7968
Mount Cable Tie Pad

014627968
A3192557-001: RNCC: 3 | RNVC: 2

18 Feb 1999

5975-01-111-6827
Blank Panel

011116827
9M381A1R: RNCC: 3 | RNVC: 9
9M381A1R: RNCC: 5 | RNVC: 2

22 Apr 1981

5975-01-209-6797
Electrical Nonmetallic Conduit Assembly

012096797
R58HB02B33W058: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-069-8929
Electrical Box Connector

010698929
2577: RNCC: 3 | RNVC: 2
G37714-577: RNCC: C | RNVC: 1

28 Dec 1978

5975-01-075-0564
Electrical Box

010750564
4B69121-103A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-078-1231
Electrical Cable Nipple

010781231
12273242-219: RNCC: 1 | RNVC: 2
202C621-51/164: RNCC: 3 | RNVC: 2
202C621-51/164: RNCC: 5 | RNVC: 9

9 Jun 1979

5975-01-079-4084
Box Junction Cover

010794084
M129-51: RNCC: 3 | RNVC: 2
M129-51: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-081-9312
Electrical Tie Down Mounting Base

010819312
ABMSAD: RNCC: 3 | RNVC: 2

23 Aug 1979

5975-01-083-1894
Electronic Junction Rack

010831894
CTJ-3D-08: RNCC: 3 | RNVC: 2
802720-1-08: RNCC: 5 | RNVC: 2
5204815-8: RNCC: C | RNVC: 1

19 Sep 1979

5975-01-083-3243
Electrical Conduit Bend

010833243
UL 797: RNCC: 3 | RNVC: 1
ANSI UL797: RNCC: 3 | RNVC: 2
WW-C-563: RNCC: 5 | RNVC: 9
WW-C-563 TY3: RNCC: 5 | RNVC: 9
MS75023-3: RNCC: 5 | RNVC: 9

21 Sep 1979

5975-01-088-6020
Conduit Chase Nipple

010886020
10359788: RNCC: 3 | RNVC: 2

16 Jan 1980

5975-01-092-2110
Electrical Conduit Elbow

010922110
461-TB: RNCC: 3 | RNVC: 2
LMFL90-75: RNCC: 5 | RNVC: 2
1743: RNCC: 5 | RNVC: 9
186: RNCC: 5 | RNVC: 9
9-75: RNCC: 5 | RNVC: 9
182: RNCC: 5 | RNVC: 9
461: RNCC: 5 | RNVC: 9
WSS94750: RNCC: 7 | RNVC: 2

21 Mar 1980

5975-01-096-2070
Electrical-Electronic Equipment Chassis

010962070
638-9039-001: RNCC: 3 | RNVC: 2

15 Jun 1980

5975-01-097-2166
Electrical Wall Plate

010972166
WLRD-1: RNCC: 3 | RNVC: 2
FSK-WRD: RNCC: 5 | RNVC: 2
AF32A23605-Y126: RNCC: 5 | RNVC: 9

7 Jul 1980

5975-01-087-0807
Blank Panel

010870807
A8P6: RNCC: 3 | RNVC: 2

11 Dec 1979

5975-01-104-2390
Electrical Equipment Mounting Base

011042390
22720-1: RNCC: 3 | RNVC: 2
DL86-5132: RNCC: 3 | RNVC: 2
22720: RNCC: 5 | RNVC: 9
0N231645: RNCC: 7 | RNVC: 2

1 Dec 1980

5975-01-104-9864
Electrical Conductor Bushing

011049864
2420: RNCC: 3 | RNVC: 2

14 Dec 1980

5975-01-105-8251
Raceway Coupling

011058251
G3001: RNCC: 3 | RNVC: 2
17-1-5988-1: RNCC: 7 | RNVC: 2

5 Jan 1981

5975-01-110-3600
Electrical Grounding Plate

011103600
3365505-1: RNCC: 3 | RNVC: 2
3365505-1: RNCC: 3 | RNVC: 2
3365505-1: RNCC: 5 | RNVC: 2
3365505-1: RNCC: 5 | RNVC: 9
5975PL0802195: RNCC: 6 | RNVC: 9

29 Mar 1981

5975-01-112-6605
Rigid Metal Conduit Assembly

011126605
4B69142-127A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-113-1511
Electrical Wall Plate

011131511
12297857: RNCC: 3 | RNVC: 2

16 May 1981

5975-01-114-7435
Electrical Cable Protector

011147435
12299743: RNCC: 3 | RNVC: 2
10087272: RNCC: 6 | RNVC: 9

22 Jun 1981

5975-01-115-5895
Electrical Bonding Ring

011155895
31-90141: RNCC: 3 | RNVC: 2
573427-1: RNCC: 5 | RNVC: 9

10 Jul 1981

5975-01-116-8979
Rigid Metal Conduit Assembly

011168979
4B69142-121A: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-01-120-1084
Cable Spacer

011201084
2589710-2: RNCC: 3 | RNVC: 2

11 Oct 1981

5975-01-121-0743
Control Box

011210743
81245: RNCC: 3 | RNVC: 2
81245: RNCC: 5 | RNVC: 9
81245: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-122-2463
Rigid Metal Conduit Assembly

011222463
4B69142-113A: RNCC: 3 | RNVC: 2
4B69142-113A: RNCC: 5 | RNVC: 2
4B69142-113A: RNCC: 5 | RNVC: 2
4B69142-113A: RNCC: 5 | RNVC: 2

18 Nov 1981

5975-01-126-7508
Electrical Conduit Adapter

011267508
12311887-37: RNCC: 1 | RNVC: 2
TXR40AB00-1206: RNCC: 3 | RNVC: 2
S2905S6706LNS034-000: RNCC: 3 | RNVC: 2
BA40AB00-1206A: RNCC: 5 | RNVC: 9

17 Feb 1982

5975-01-130-2581
Junction Box Cover

011302581
65560-05125-102: RNCC: 1 | RNVC: 2
B1289-102: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-132-3416
Rigid Metal Conduit Assembly

011323416
26-370-0850: RNCC: 3 | RNVC: 2
26-370-0850: RNCC: 5 | RNVC: 9

26 May 1982

5975-01-134-8439
Electrical Components Tie Down Strap

011348439
4019567-2: RNCC: 3 | RNVC: 2

11 Jul 1982

5975-01-137-6211
Strap Mount

011376211
SMS-A-C15: RNCC: 3 | RNVC: 2

1 Sep 1982

5975-01-148-7259
Electrical Components Tie Down Strap

011487259
33337: RNCC: 3 | RNVC: 2
33337-2: RNCC: 5 | RNVC: 9

9 Mar 1983

5975-01-151-3439
Electrical Components Tie Down Strap

011513439
TY635MX: RNCC: 3 | RNVC: 2
10134333: RNCC: 6 | RNVC: 9

16 Apr 1983

5975-01-155-7500
Electrical-Electronic Equipment Chassis

011557500
73-25189-002: RNCC: 3 | RNVC: 2
PTC2145121B-R: RNCC: 5 | RNVC: 2

15 Jun 1983

5975-01-156-0650
Blank Panel

011560650
A12N10P: RNCC: 3 | RNVC: 2
A12N10P: RNCC: 5 | RNVC: 9

18 Jun 1983

5975-01-157-0693
Electrical Components Tie Down Strap

011570693
RT350: RNCC: 3 | RNVC: 2

29 Jun 1983

5975-01-178-4507
Stuffing Tube Packing Nut

011784507
M24235/9-064: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-176-9699
Stuffing Tube

011769699
034-07627-000: RNCC: 3 | RNVC: 2
34-7627-000: RNCC: 3 | RNVC: 9
34-7627-000: RNCC: 5 | RNVC: 2
34-C-7627: RNCC: 5 | RNVC: 9
34-7627: RNCC: 5 | RNVC: 9

18 Apr 1984

5975-01-183-5060
Ckt Bkr Assy Panel

011835060
880408-T1: RNCC: 3 | RNVC: 1
806292 PC325: RNCC: 5 | RNVC: 1
N65-T1: RNCC: 5 | RNVC: 1
806292: RNCC: 5 | RNVC: 1

7 Jul 1984

5975-01-185-3693
Junction Box

011853693
M24142/3-001: RNCC: 2 | RNVC: 2
MIL-E-24142/3: RNCC: 4 | RNVC: 1
ENC6X9: RNCC: 5 | RNVC: 1
M24142-3-001: RNCC: 5 | RNVC: 9

27 Jul 1984

5975-01-185-3642
Electrical Cable Nipple

011853642
7000.022.13: RNCC: 3 | RNVC: 2
5M2166-001: RNCC: 5 | RNVC: 2
7000.022.13: RNCC: 5 | RNVC: 2

27 Jul 1984

5975-01-185-3694
Junction Box

011853694
AB-14126JHA: RNCC: 3 | RNVC: 2
A1412CHAL: RNCC: 3 | RNVC: 2

27 Jul 1984

5975-01-183-5359
Electrical Cable Support

011835359
N31-A: RNCC: 3 | RNVC: 1
806292 PC314: RNCC: 5 | RNVC: 1
880380-A: RNCC: 5 | RNVC: 1
806292: RNCC: 5 | RNVC: 1

7 Jul 1984

5975-01-194-3419
Cable Hanger

011943419
9365602: RNCC: 3 | RNVC: 2
26591-4: RNCC: 5 | RNVC: 9

13 Nov 1984

5975-01-163-1099
Cable Marker Sleeve

011631099
RS7074-1706: RNCC: 3 | RNVC: 2
SS7074: RNCC: 3 | RNVC: 2
SS7074-1706: RNCC: 5 | RNVC: 2

28 Sep 1983

5975-01-164-1157
Conduit Outlet

011641157
GUAX14: RNCC: 3 | RNVC: 2

12 Oct 1983

5975-01-170-4826
Electrical Conduit Ferrule

011704826
112111: RNCC: 3 | RNVC: 2
112111: RNCC: 5 | RNVC: 9

25 Jan 1984

5975-01-170-4947
Junction Box Cover

011704947
10937841-1: RNCC: 3 | RNVC: 2

25 Jan 1984

5975-01-170-7836
Blank Panel

011707836
9M381B12E: RNCC: 3 | RNVC: 2

29 Jan 1984

5975-01-171-9266
Electrical Equipment Drawer

011719266
82936A: RNCC: 3 | RNVC: 9
HP82936A: RNCC: 5 | RNVC: 9
82936A: RNCC: 5 | RNVC: 9
82936A: RNCC: C | RNVC: 1

15 Feb 1984

5975-01-172-0435
Box Assembly

011720435
518-4863898 ITEM 1: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-171-9118
Electrical-Electronic Equipment Panel

011719118
406-075-138-101: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-173-8789
Blank Panel

011738789
A20P16SS6: RNCC: 3 | RNVC: 2
A-20P16SS: RNCC: 5 | RNVC: 9

10 Mar 1984

5975-01-173-9592
Junction Box

011739592
LT11-33: RNCC: 3 | RNVC: 2

13 Mar 1984

5975-01-175-1211
Mounting Assembly-Electrical Equipment

011751211
16F0265-41: RNCC: 3 | RNVC: 2

27 Mar 1984

5975-01-175-2057
Insulator

011752057
3604-16-7: RNCC: 3 | RNVC: 2

28 Mar 1984

5975-01-176-6870
Electrical Box Connector

011766870
91701168N: RNCC: 3 | RNVC: 2
91701168: RNCC: 3 | RNVC: 9
91701168: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-195-5654
Electrical Cable Nipple

011955654
151-084: RNCC: 3 | RNVC: 2
10524535: RNCC: 5 | RNVC: 1
2CD379: RNCC: 5 | RNVC: 2
2CD379: RNCC: 5 | RNVC: 9

30 Nov 1984

5975-01-199-4484
Blank Panel

011994484
A6P6SS: RNCC: 3 | RNVC: 2

22 Jan 1985

5975-01-201-1488
Junction Box

012011488
4B60033-107A: RNCC: 3 | RNVC: 2

13 Feb 1985

5975-01-200-6048
Electrical Box Connector

012006048
429R413H02: RNCC: 3 | RNVC: 2

7 Feb 1985

5975-01-202-4426
Junction Box

012024426
A1008CHAL: RNCC: 3 | RNVC: 2
AB1084JHA: RNCC: 3 | RNVC: 2
A1008CHAL: RNCC: 5 | RNVC: 9

2 Mar 1985

5975-01-204-2744
Junction Box

012042744
M24142/6-008: RNCC: 2 | RNVC: 2
MIL-E-24142/6: RNCC: 4 | RNVC: 1

24 Mar 1985

5975-01-208-1529
Stuffing Tube

012081529
CT0741-01: RNCC: 3 | RNVC: 2
P207-0001: RNCC: 3 | RNVC: 2
LE482-0027-0001: RNCC: 5 | RNVC: 1

10 May 1985

5975-01-208-9618
Electrical Cable Nipple

012089618
12339710: RNCC: 3 | RNVC: 2
12339710: RNCC: 3 | RNVC: 2
12339710: RNCC: 5 | RNVC: 1
5582481: RNCC: 5 | RNVC: 9
12339710: RNCC: 5 | RNVC: 9
5975PL0715610: RNCC: 6 | RNVC: 9

21 May 1985

5975-01-211-4394
Electrical Nonmetallic Conduit Assembly

012114394
R58HB33B34A012: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

26 Jun 1985

5975-01-229-2839
Electrical Box Connector

012292839
STA-6: RNCC: 3 | RNVC: 9
STA-6: RNCC: 5 | RNVC: 2

29 Mar 1986

5975-01-229-2854
Rigid Nonmetallic Conduit

012292854
49412: RNCC: 3 | RNVC: 9
A53CE12: RNCC: 5 | RNVC: 2

29 Mar 1986

5975-01-236-9806
Electronic Junction Rack

012369806
CTJ-3A-03: RNCC: 3 | RNVC: 2
CTJ-3A-03: RNCC: 5 | RNVC: 2

24 Jul 1986

5975-01-238-9556
Adapter

012389556
019900-4001: RNCC: 3 | RNVC: 2
6166881: RNCC: 5 | RNVC: 1
6166881: RNCC: 5 | RNVC: 1
6166881: RNCC: D | RNVC: 9

23 Aug 1986

5975-01-244-3514
Electrical Conduit Union

012443514
300-5940907/PC9: RNCC: 3 | RNVC: 1
2 1/2 IN. UNION: RNCC: 5 | RNVC: 1

11 Nov 1986

5975-01-247-3622
Electrical Components Tie Down Strap

012473622
RT50R: RNCC: 3 | RNVC: 2
86-1345411-1: RNCC: 5 | RNVC: 9
86-1345411-1: RNCC: 7 | RNVC: 2

3 Jan 1987

5975-01-247-4626
Blank Panel

012474626
HNM-4BL: RNCC: 3 | RNVC: 2
HNM-4BL: RNCC: 5 | RNVC: 9

6 Jan 1987

5975-01-247-4791
Adapter Universal

012474791
13227E6201: RNCC: 3 | RNVC: 2

7 Jan 1987

5975-01-247-7734
Blank Panel

012477734
74A802615-1019: RNCC: 3 | RNVC: 9
74A802615-1019: RNCC: 5 | RNVC: 9
10154468: RNCC: 6 | RNVC: 9
74A802615-1019: RNCC: C | RNVC: 1

12 Jan 1987

5975-01-252-3611
Cable Hanger

012523611
2083: RNCC: 3 | RNVC: 2

1 Apr 1987

5975-01-253-6061
Electrical Conduit Locknut

012536061
1664C12H01: RNCC: 3 | RNVC: 2

22 Apr 1987

5975-01-252-8017
Blank Panel

012528017
27169500: RNCC: 3 | RNVC: 2
27169500: RNCC: 3 | RNVC: 9

8 Apr 1987

5975-01-255-7657
Electrical Conduit Adapter

012557657
11831204-1: RNCC: 3 | RNVC: 2

25 May 1987

5975-01-256-4541
Electronic Junction Rack

012564541
CTJ3A04: RNCC: 3 | RNVC: 2
SJT504404: RNCC: 5 | RNVC: 9
FE417-0108-0003: RNCC: 7 | RNVC: 2

5 Jun 1987

5975-01-256-4542
Electronic Junction Rack

012564542
CTJ-3A-12: RNCC: 3 | RNVC: 2
FE417-0108-0020: RNCC: 7 | RNVC: 2

5 Jun 1987

5975-01-257-3107
Electronic Junction Rack

012573107
TJT-701002: RNCC: 3 | RNVC: 2
TJT701002: RNCC: 5 | RNVC: 2
421501-032: RNCC: 5 | RNVC: 9
000-8008-438: RNCC: 5 | RNVC: 9

17 Jun 1987

5975-01-217-1198
Electrical Conduit Locknut

012171198
9384724: RNCC: 1 | RNVC: 2
142: RNCC: 3 | RNVC: 2
152: RNCC: 5 | RNVC: 9
111K1904: RNCC: C | RNVC: 1

21 Sep 1985

5975-01-219-0889
Junction Box

012190889
A1212CHNF: RNCC: 3 | RNVC: 2
1455760: RNCC: 5 | RNVC: 2
1455760: RNCC: 5 | RNVC: 9

21 Oct 1985

5975-01-220-1420
Junction Box

012201420
65560-03150-059: RNCC: 3 | RNVC: 2

9 Nov 1985

5975-01-222-7522
Junction Box

012227522
800H-4HZ4: RNCC: 3 | RNVC: 2

16 Dec 1985

5975-01-258-6234
Electrical Nonmetallic Conduit Assembly

012586234
R58HB06E45W010: RNCC: 3 | RNVC: 1
R58HB06E45W010: RNCC: 3 | RNVC: 2
R58HB06E45W010: RNCC: 5 | RNVC: 1
R58HB06E45W010: RNCC: 7 | RNVC: 9

5 Jul 1987

5975-01-258-7076
Conduit Outlet Cover

012587076
10252900-1: RNCC: 3 | RNVC: 2
10252900-1: RNCC: 5 | RNVC: 1

7 Jul 1987

5975-01-258-8684
Cable Hanger

012588684
9396140: RNCC: 3 | RNVC: 2

9 Jul 1987

5975-01-260-7109
Cable Hanger

012607109
70209-74007-102: RNCC: 3 | RNVC: 2
70209-74007: RNCC: 5 | RNVC: 1

4 Aug 1987

5975-01-260-7966
Electrical Conduit Adapter

012607966
S2182F1837-1-12C: RNCC: 3 | RNVC: 2
GA801HL19F12CA: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-262-8520
Electrical Bonding Ring

012628520
719-4CR: RNCC: 3 | RNVC: 2
5340-051-0001: RNCC: 7 | RNVC: 2

4 Sep 1987

5975-01-263-3618
Electrical Wall Plate

012633618
G-3027AE: RNCC: 3 | RNVC: 2
3046A: RNCC: 5 | RNVC: 9

13 Sep 1987

5975-01-264-6654
Electrical Equipment Mounting Base

012646654
2B44-BB-34-10: RNCC: 3 | RNVC: 2

5 Oct 1987

5975-01-265-5117
Flexible Metal Conduit Assembly

012655117
5122605-029-101: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-265-6900
Electrical Components Tie Down Strap

012656900
PLT3S-C: RNCC: 3 | RNVC: 2
PLT3S: RNCC: 5 | RNVC: 9
18537-2: RNCC: 5 | RNVC: 9

17 Oct 1987

5975-01-268-0440
Electrical Cable Nipple

012680440
202D163-25: RNCC: 3 | RNVC: 2

21 Nov 1987

5975-01-271-2316
Electrical Entrance Cap Shell

012712316
3357-9225: RNCC: 3 | RNVC: 2
3357-9225: RNCC: 3 | RNVC: 9
3522 500 47604: RNCC: 5 | RNVC: 2

22 Jan 1988

5975-01-274-0220
Electrical Tie Down Mounting Base

012740220
ABM2S-A: RNCC: 3 | RNVC: 2
91525209: RNCC: 5 | RNVC: 2
13943737-0: RNCC: 5 | RNVC: 2
1047080HC: RNCC: 5 | RNVC: 2
ABM2S-A: RNCC: 5 | RNVC: 2
12H4785: RNCC: 5 | RNVC: 2
8921895904: RNCC: 5 | RNVC: 2
G1-30-9063-001: RNCC: 7 | RNVC: 2
152201086: RNCC: C | RNVC: 1

4 Mar 1988

5975-01-275-8335
Electrical Nonmetallic Conduit Assembly

012758335
R58HA10D36A008: RNCC: 3 | RNVC: 2
R58HA1036A008: RNCC: 5 | RNVC: 9
R58HA1036A008: RNCC: 5 | RNVC: 9

27 Mar 1988

5975-01-275-9682
Blank Panel

012759682
A10P8: RNCC: 3 | RNVC: 2
619615-5: RNCC: 3 | RNVC: 2
A10P8: RNCC: 5 | RNVC: 2

30 Mar 1988

5975-01-277-5661
Electrical Bonding Ring

012775661
13228E6111: RNCC: 3 | RNVC: 2
BS.2318.00.00.080: RNCC: 5 | RNVC: 9

22 Apr 1988

5975-01-279-7597
Cable Strain Relief Bushing

012797597
040-2531: RNCC: 3 | RNVC: 2

25 May 1988

5975-01-280-3556
Electrical Conduit Locknut

012803556
040-142: RNCC: 3 | RNVC: 2
5054520-16: RNCC: 5 | RNVC: 9
5054520: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-281-5268
Electrical Components Tie Down Strap

012815268
RT-350Z: RNCC: 3 | RNVC: 2
PLT1M-C76: RNCC: 5 | RNVC: 1
PLT1M-M76: RNCC: 5 | RNVC: 2
ASC1366932: RNCC: 5 | RNVC: 9
11200180-1: RNCC: 7 | RNVC: 2

25 Jun 1988

5975-01-124-4269
Interconnecting Box

011244269
SE625A4-60: RNCC: 3 | RNVC: 9
S-625A-60: RNCC: 5 | RNVC: 1
CAC625A-60: RNCC: 5 | RNVC: 1
A0248230: RNCC: 5 | RNVC: 9
NE-625QA4: RNCC: 5 | RNVC: 9
SE-625A4-60: RNCC: 5 | RNVC: 9

5 Jan 1982

5975-01-135-5954
Ground Rod

011355954
635837: RNCC: 3 | RNVC: 2
6253SGLW: RNCC: 5 | RNVC: 9
6253SGLW-10M: RNCC: 5 | RNVC: 9

27 Jul 1982

5975-01-139-3474
Cable Retainer

011393474
8126624: RNCC: 3 | RNVC: 9

29 Sep 1982

5975-01-123-4562
Rigid Metal Conduit

011234562
11677706: RNCC: 3 | RNVC: 2

12 Dec 1981

5975-01-192-2907
Junction Box

011922907
A606CHAL: RNCC: 3 | RNVC: 2
AB-664JHA: RNCC: 5 | RNVC: 2
B-664CHAL: RNCC: 5 | RNVC: 9

19 Oct 1984

5975-01-194-1237
Cable Hanger

011941237
11464191: RNCC: 3 | RNVC: 2
11464191: RNCC: 5 | RNVC: 1

10 Nov 1984

5975-01-208-8443
Electrical Grounding Plate

012088443
93855-02: RNCC: 3 | RNVC: 2
53088-01: RNCC: 5 | RNVC: 2

21 May 1985

5975-01-248-4418
Junction Box

012484418
4695775-0001: RNCC: 3 | RNVC: 2

23 Jan 1987

5975-01-258-8238
Electrical Nonmetallic Conduit Assembly

012588238
R58HB51H59A006: RNCC: 3 | RNVC: 2
R58HB51H59A006: RNCC: 5 | RNVC: 2
R58HB51H59A006: RNCC: 5 | RNVC: 9

8 Jul 1987

5975-01-074-3081
Junction Box

010743081
242: RNCC: 3 | RNVC: 2
4-SDW-LC: RNCC: 5 | RNVC: 2

29 Mar 1979

5975-01-075-0569
Electrical Box

010750569
4B69121-111A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-5406
Conduit Outlet Cover

010755406
GUA06: RNCC: 3 | RNVC: 2

23 Apr 1979

5975-01-082-5363
Conduit Outlet

010825363
LR39: RNCC: 3 | RNVC: 2
LR100-A: RNCC: 3 | RNVC: 2
LR39: RNCC: 5 | RNVC: 1
LR-100A: RNCC: 5 | RNVC: 9
019-5044-060: RNCC: C | RNVC: 1

5 Sep 1979

5975-01-082-3204
Blank Panel

010823204
12682B: RNCC: 3 | RNVC: 2
068-002159-003: RNCC: 7 | RNVC: 2

31 Aug 1979

5975-01-079-4442
Conduit Outlet

010794442
FD1019: RNCC: 3 | RNVC: 2
FD-1-50L: RNCC: 5 | RNVC: 2
FD1019: RNCC: 5 | RNVC: 9

6 Jul 1979

5975-01-079-4088
Box Junction Cover

010794088
4B69121-121A: RNCC: 3 | RNVC: 2

5 Jul 1979

5975-01-083-5738
Electrical Cable Nipple

010835738
12273147-230: RNCC: 1 | RNVC: 2
202F221-50-0: RNCC: 3 | RNVC: 2
313F332-8: RNCC: 5 | RNVC: 2
313F332-8: RNCC: 5 | RNVC: 9
313F332-8: RNCC: 5 | RNVC: 9
202F221-50: RNCC: 5 | RNVC: 9

26 Sep 1979

5975-01-084-2093
Stand-Off Bushing

010842093
5205933-3: RNCC: 3 | RNVC: 2
3005-479: RNCC: 5 | RNVC: 2
205933-3: RNCC: 5 | RNVC: 9

12 Oct 1979

5975-01-091-6264
Clamp

010916264
10250945-9: RNCC: 3 | RNVC: 2
10250945-9: RNCC: 5 | RNVC: 2
10250945-9: RNCC: 5 | RNVC: 2
10250945-9: RNCC: 5 | RNVC: 2

11 Mar 1980

5975-01-097-2101
Electrical Components Tie Down Strap

010972101
PLC4S-S10-C: RNCC: 3 | RNVC: 2
SSC4S-S10-C: RNCC: 5 | RNVC: 9

7 Jul 1980

5975-01-101-4189
Cover Assembly

011014189
70550-02131-042: RNCC: 3 | RNVC: 2

29 Sep 1980

5975-01-101-5324
Electrical Tie Down Mounting Base

011015324
LPMM-S2-C: RNCC: 3 | RNVC: 2
533539-3: RNCC: 3 | RNVC: 2
LPMM-S2: RNCC: 5 | RNVC: 2
107156-01: RNCC: 5 | RNVC: 9
10124229: RNCC: 6 | RNVC: 9
533539: RNCC: 7 | RNVC: 2
12917769: RNCC: 7 | RNVC: 2
GB0239CR: RNCC: D | RNVC: 9

2 Oct 1980

5975-01-102-1589
Electrical Tie Down Mounting Base

011021589
TC-5828: RNCC: 3 | RNVC: 2
4049-0057: RNCC: 7 | RNVC: 2

12 Oct 1980

5975-01-104-4863
Electrical Box Connector

011044863
DB-614: RNCC: 3 | RNVC: 2
327767-7: RNCC: 5 | RNVC: 9
DB-614-L: RNCC: 5 | RNVC: 9
CG-1275: RNCC: 5 | RNVC: 9
327767-7: RNCC: 7 | RNVC: 2
CG-1275: RNCC: C | RNVC: 1

5 Dec 1980

5975-01-109-6411
Electrical Equipment Mounting Base

011096411
S1660-60036-001: RNCC: 3 | RNVC: 2
S1660-60036-1: RNCC: 5 | RNVC: 1

19 Mar 1981

5975-01-101-5348
Electrical Components Tie Down Strap

011015348
696-40381-1: RNCC: 3 | RNVC: 1
08403: RNCC: 3 | RNVC: 2
PLT4H-TL30: RNCC: 3 | RNVC: 2
T120RHS: RNCC: 3 | RNVC: 2
ST9M559-3: RNCC: 5 | RNVC: 1
PLT4H-C30: RNCC: 5 | RNVC: 9
10134323: RNCC: 6 | RNVC: 9

2 Oct 1980

5975-01-108-5183
Electrical Grounding Plate

011085183
12299172: RNCC: 3 | RNVC: 2

1 Mar 1981

5975-01-114-7661
Electrical Conduit Coupling

011147661
11663099: RNCC: 1 | RNVC: 2
TC-612: RNCC: 3 | RNVC: 2
TC-612: RNCC: 5 | RNVC: 9
TC-612: RNCC: C | RNVC: 1

22 Jun 1981

5975-01-115-3877
Cable Hanger Support Bracket

011153877
372256: RNCC: 3 | RNVC: 2
372256: RNCC: 5 | RNVC: 9

4 Jul 1981

5975-01-115-3001
Electrical Box Connector

011153001
5234AL: RNCC: 3 | RNVC: 2
ST-100AL: RNCC: 5 | RNVC: 2
02320-1755: RNCC: 5 | RNVC: 9
02320-1755: RNCC: 7 | RNVC: 2

2 Jul 1981

5975-01-118-2880
Electrical Conduit Adapter

011182880
12311887: RNCC: 1 | RNVC: 2
TXR40AB00-2416AI: RNCC: 3 | RNVC: 2
S2905A7716AIS034-000: RNCC: 5 | RNVC: 2
12311887-31: RNCC: 5 | RNVC: 9

31 Aug 1981

5975-01-119-8454
Blank Panel

011198454
A16P12: RNCC: 3 | RNVC: 2

6 Oct 1981

5975-01-118-8582
Electrical Conduit Ferrule

011188582
GR2126-5: RNCC: 3 | RNVC: 1
GR2126-EM05: RNCC: 3 | RNVC: 2

12 Sep 1981

5975-01-120-9810
Interconnecting Box

011209810
12311942: RNCC: 3 | RNVC: 2

28 Oct 1981

5975-01-122-0559
Cable Marker Sleeve

011220559
SS7026-2156: RNCC: 3 | RNVC: 2

13 Nov 1981

5975-01-137-7623
Switch Terminal Cover

011377623
102A993-3-42-8: RNCC: 3 | RNVC: 2
102A993-3-42: RNCC: 5 | RNVC: 9
5975PL0929601: RNCC: 6 | RNVC: 9

2 Sep 1982

5975-01-139-3400
Cable Marker Sleeve

011393400
215511T90: RNCC: 3 | RNVC: 2
215511T90: RNCC: 3 | RNVC: 2
TMS-SCE-1/4-2.0-9: RNCC: 5 | RNVC: 1
RNF-100-1/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T90: RNCC: 7 | RNVC: 2

29 Sep 1982

5975-01-140-9064
Blank Panel

011409064
12681B: RNCC: 3 | RNVC: 2
068-002159-002: RNCC: 7 | RNVC: 2

20 Oct 1982

5975-01-142-9737
Electrical Conduit Bend

011429737
ANSI/UL797: RNCC: 3 | RNVC: 1
12267097: RNCC: 3 | RNVC: 2

23 Nov 1982

5975-01-145-6769
Electronic Junction Rack

011456769
M81714-10-1: RNCC: 2 | RNVC: 2
MIL-T-81714/10: RNCC: 4 | RNVC: 1
TJT702002: RNCC: 5 | RNVC: 2

15 Jan 1983

5975-01-147-4781
Socket

011474781
8501NR52: RNCC: 3 | RNVC: 9
8501NR-5: RNCC: 5 | RNVC: 9

17 Feb 1983

5975-01-150-3121
Conduit Outlet

011503121
5390-0: RNCC: 3 | RNVC: 2
66932AX: RNCC: 3 | RNVC: 2
66932AX: RNCC: 5 | RNVC: 9
894-7L: RNCC: 5 | RNVC: 9

4 Apr 1983

5975-01-151-5823
Electrical Conduit Bend

011515823
12267096: RNCC: 3 | RNVC: 2

19 Apr 1983

5975-01-153-1927
Junction Box Cover

011531927
287510: RNCC: 3 | RNVC: 2

13 May 1983

5975-01-157-9432
Rack Electrical Adapter Kit

011579432
5061-0072: RNCC: 3 | RNVC: 2

13 Jul 1983

5975-01-178-9034
Blank Panel

011789034
A12P10AL: RNCC: 3 | RNVC: 2

11 May 1984

5975-01-180-0072
Electrical Conduit Coupling Nut

011800072
S1741B-3-3: RNCC: 3 | RNVC: 2
10134291: RNCC: 6 | RNVC: 9
S1741A-3-3: RNCC: E | RNVC: 8

23 May 1984

5975-01-183-5057
Door Pos Device

011835057
824991-T1: RNCC: 3 | RNVC: 1
824991T1: RNCC: 3 | RNVC: 2
806292 PC311: RNCC: 5 | RNVC: 1
826292: RNCC: 5 | RNVC: 1

7 Jul 1984

5975-01-183-8797
Electrical Equipment Mounting Base

011838797
G134721-1: RNCC: 3 | RNVC: 2
G134721-1: RNCC: 5 | RNVC: 2
G134721-1: RNCC: 5 | RNVC: 9

11 Jul 1984

5975-01-184-5202
Cable Tie Mount

011845202
FTH-3: RNCC: 3 | RNVC: 9

18 Jul 1984

5975-01-183-7987
Electrical-Electronic Equipment Chassis

011837987
1395AS293: RNCC: 3 | RNVC: 2

10 Jul 1984

5975-01-184-8221
Electrical Box Connector

011848221
4G52483-103A: RNCC: 3 | RNVC: 2

23 Jul 1984

5975-01-186-3493
Flexible Nonmetallic Conduit

011863493
75A791011-2006: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-9955
Conduit Outlet

011869955
FSCT1: RNCC: 3 | RNVC: 2
FSCT-1-50: RNCC: 3 | RNVC: 2
W-C-586: RNCC: 4 | RNVC: 1
687J837-13: RNCC: C | RNVC: 1

17 Aug 1984

5975-01-191-4814
Electrical Box Connector

011914814
SHC-1023: RNCC: 3 | RNVC: 2
051-01-1023: RNCC: 5 | RNVC: 9
080014: RNCC: 5 | RNVC: 9
12965291-1: RNCC: 7 | RNVC: 2
A3006852-5: RNCC: 7 | RNVC: 2
7909857-04: RNCC: C | RNVC: 1

9 Oct 1984

5975-01-161-4069
Flexible Metal Conduit Assembly

011614069
52045-1: RNCC: 3 | RNVC: 2
52045-1: RNCC: 5 | RNVC: 2
10134270: RNCC: 6 | RNVC: 9

5 Sep 1983

5975-01-163-5975
Blank Panel

011635975
872480-T2: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-01-164-3743
Electrical Conduit Locknut

011643743
LD482-0049-0007: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-167-5991
Electrical Components Tie Down Strap

011675991
TY-524MX: RNCC: 3 | RNVC: 2
TY524MX: RNCC: 5 | RNVC: 2
TY-524MX: RNCC: 5 | RNVC: 2
SW25594-3: RNCC: 7 | RNVC: 2

2 Dec 1983

5975-01-168-0471
Metallic Raceway

011680471
12325645: RNCC: 3 | RNVC: 2

10 Dec 1983

5975-01-169-1567
Conduit Outlet

011691567
30212: RNCC: 3 | RNVC: 2
5330-0: RNCC: 5 | RNVC: 2
274-L: RNCC: 5 | RNVC: 9

4 Jan 1984

5975-01-168-6147
Conduit

011686147
39841: RNCC: 3 | RNVC: 2
11686147: RNCC: 3 | RNVC: 2
39841: RNCC: 3 | RNVC: 9
13153897-2: RNCC: 5 | RNVC: 9

20 Dec 1983

5975-01-171-8355
Metallic Raceway

011718355
12325645-1: RNCC: 3 | RNVC: 2
12325644: RNCC: 5 | RNVC: 9

15 Feb 1984

5975-01-173-8787
Blank Panel

011738787
A8P6SS: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-175-0931
Blank Panel

011750931
880412-T4: RNCC: 3 | RNVC: 2
N111-T4: RNCC: 5 | RNVC: 9
806314 PIECE 310: RNCC: 5 | RNVC: 9

27 Mar 1984

5975-01-195-7611
Electrical Box Connector

011957611
3202: RNCC: 3 | RNVC: 2

2 Dec 1984

5975-01-195-5844
Electrical Box Connector

011955844
BDSR62: RNCC: 3 | RNVC: 2
073-03-1203: RNCC: 3 | RNVC: 2

30 Nov 1984

5975-01-196-4878
Blank Panel

011964878
7-314200055: RNCC: 3 | RNVC: 2
7-314200055: RNCC: 3 | RNVC: 9

12 Dec 1984

5975-01-197-1664
Electrical Conduit Elbow

011971664
12311080-09: RNCC: 3 | RNVC: 2

18 Dec 1984

5975-01-197-9047
Electrical Conduit Coupling

011979047
FL204-10A: RNCC: 3 | RNVC: 2
BACC42Y10A: RNCC: 3 | RNVC: 2
B207S10DB: RNCC: 5 | RNVC: 2
B207S10A: RNCC: 5 | RNVC: 9

30 Dec 1984

5975-01-198-5908
Electronic Junction Rack

011985908
CTJ-3A-06: RNCC: 3 | RNVC: 2
CTJ-3A-06: RNCC: 5 | RNVC: 9

10 Jan 1985

5975-01-199-4502
Junction Box

011994502
A606NFAL: RNCC: 3 | RNVC: 2

22 Jan 1985

5975-01-199-3186
Electrical Box Connector

011993186
SHC-1034: RNCC: 3 | RNVC: 2
17-3-3682-2: RNCC: 5 | RNVC: 2

20 Jan 1985

5975-01-199-9033
Electrical Conductor Bushing

011999033
ABB-100: RNCC: 3 | RNVC: 2
98-19661: RNCC: 5 | RNVC: 1
ABB-100: RNCC: 5 | RNVC: 9
80-7377-01: RNCC: 7 | RNVC: 1

28 Jan 1985

5975-01-205-3271
Stuffing Tube

012053271
CT0741-02: RNCC: 3 | RNVC: 2
LE482-0027-0002: RNCC: 5 | RNVC: 2

7 Apr 1985

5975-01-207-1706
Electrical Cable Nipple

012071706
12339334: RNCC: 3 | RNVC: 2
5584166: RNCC: 5 | RNVC: 9

28 Apr 1985

5975-01-208-7643
Cable Hanger

012087643
AS23190: RNCC: 3 | RNVC: 1
M23190/1-0: RNCC: 3 | RNVC: 2
M23190/1-0: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
M23190/1-0: RNCC: 5 | RNVC: 9

19 May 1985

5975-01-225-6405
Nonmetallic Raceway

012256405
181-12005: RNCC: 3 | RNVC: 2
E1X2LG6: RNCC: 5 | RNVC: 2
G1X2LG6: RNCC: 5 | RNVC: 2
SL-1 IN X 2 IN-G: RNCC: 5 | RNVC: 9
238-0695: RNCC: 7 | RNVC: 2

5 Feb 1986

5975-01-229-1696
Cable Marker Sleeve

012291696
9317987-2: RNCC: 1 | RNVC: 2
TMS-3/16-1.50-9: RNCC: 3 | RNVC: 2
TMS-3/16X1.5: RNCC: 5 | RNVC: 2
HS5189-1181: RNCC: 5 | RNVC: 9
TMS-3/16-1.50: RNCC: 5 | RNVC: 9
HS5189-1181: RNCC: C | RNVC: 1

27 Mar 1986

5975-01-228-7139
Electrical Nonmetallic Conduit Assembly

012287139
R58HB12H40W010: RNCC: 3 | RNVC: 1
012287139-02329: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

20 Mar 1986

5975-01-231-6650
Electrical Box Connector

012316650
371AL: RNCC: 3 | RNVC: 2

1 May 1986

5975-01-232-0976
Electrical Nonmetallic Conduit Assembly

012320976
CRN2151: RNCC: 3 | RNVC: 2

8 May 1986

5975-01-232-1005
Electronic Junction Rack

012321005
64: RNCC: 3 | RNVC: 2
C-7005934: RNCC: 5 | RNVC: 2
N064: RNCC: 5 | RNVC: 9

8 May 1986

5975-01-235-1611
Electrical Tie Down Mounting Base

012351611
FCPI1-20: RNCC: 3 | RNVC: 2

26 Jun 1986

5975-01-237-0034
Electronic Junction Rack

012370034
CTJ-3A-10: RNCC: 3 | RNVC: 2

24 Jul 1986

5975-01-240-7888
Electrical Cable Nipple

012407888
3327720: RNCC: 3 | RNVC: 2
052-0633-0001: RNCC: 5 | RNVC: 2
3327720: RNCC: 5 | RNVC: 9

19 Sep 1986

5975-01-241-0483
Electrical Conduit Adapter

012410483
7000-718-75K000: RNCC: 3 | RNVC: 1
RP2100-EM06-S: RNCC: 3 | RNVC: 2
302-5563046 ITEM 42: RNCC: 5 | RNVC: 1
RP2100-F06-S: RNCC: 5 | RNVC: 9
RP2100-EM06-S: RNCC: 5 | RNVC: 9
S82100-EM06-S: RNCC: 5 | RNVC: 9
RP2100-G06-S: RNCC: 5 | RNVC: 9
RP2100-EM06-S: RNCC: 5 | RNVC: 9

20 Sep 1986

5975-01-250-7119
Junction Box

012507119
5029327-010-2: RNCC: 3 | RNVC: 2

6 Mar 1987

5975-01-243-9959
Blank Panel

012439959
G436-7: RNCC: 3 | RNVC: 2

5 Nov 1986

5975-01-251-0334
Electrical Cable Nipple

012510334
11442208-2: RNCC: 3 | RNVC: 2
13058-2: RNCC: 5 | RNVC: 9
11442208: RNCC: D | RNVC: 9

11 Mar 1987

5975-01-252-8095
Stuffing Tube

012528095
LE482-0024-0504: RNCC: 3 | RNVC: 2
CT0459-0504: RNCC: 5 | RNVC: 2
900-674-0504: RNCC: 5 | RNVC: 2

8 Apr 1987

5975-01-254-2850
Electrical Equipment Mounting Base

012542850
622-8379-001: RNCC: 3 | RNVC: 2
5975PL1612114: RNCC: 6 | RNVC: 9

5 May 1987

5975-01-255-3910
Electrical Conduit Bushing

012553910
RB100-75: RNCC: 3 | RNVC: 2
RB100-75: RNCC: 5 | RNVC: 9

20 May 1987

5975-01-256-6385
Electrical Components Tie Down Strap

012566385
R44302: RNCC: 3 | RNVC: 2
P44302: RNCC: 5 | RNVC: 9
SST45-C-0: RNCC: 5 | RNVC: 9
T44946: RNCC: 5 | RNVC: 9
R44302: RNCC: 5 | RNVC: 9

7 Jun 1987

5975-01-257-1830
Cable Hanger

012571830
ALC-4: RNCC: 3 | RNVC: 2
5999-018-0001: RNCC: 5 | RNVC: 9
ALC-4: RNCC: 5 | RNVC: 9

13 Jun 1987

5975-01-210-8087
Electrical Nonmetallic Conduit Assembly

012108087
R58HB12E35X012A: RNCC: 3 | RNVC: 1
R58HB12E35X012A: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-210-4979
Rigid Metal Conduit Assembly

012104979
5904030-5: RNCC: 1 | RNVC: 2
7-1477-5: RNCC: 3 | RNVC: 2
211258-DI0055: RNCC: 3 | RNVC: 2
5904030-5: RNCC: 5 | RNVC: 1

13 Jun 1985

NSN 5975-01-210-7817 012107817 ELBOW,ELECTRICAL CONDUIT

5975-01-210-7817
Electrical Conduit Elbow

012107817
12351693: RNCC: 3 | RNVC: 2
950005: RNCC: 5 | RNVC: 2
12351497: RNCC: 5 | RNVC: 9
51426-103: RNCC: 5 | RNVC: 9
51426-103: RNCC: C | RNVC: 1

18 Jun 1985

5975-01-211-3142
Electrical Conductor Bushing

012113142
SB-750-625-2840: RNCC: 3 | RNVC: 2
5584929: RNCC: 5 | RNVC: 2
9320PL0699215: RNCC: 6 | RNVC: 9

24 Jun 1985

5975-01-214-1355
Flexible Metal Conduit

012141355
750-084-20: RNCC: 3 | RNVC: 2
71350-62-31: RNCC: 3 | RNVC: 2
023700-HP0625: RNCC: 3 | RNVC: 2
SM83-05: RNCC: 5 | RNVC: 9
MHT-62-31-P: RNCC: 5 | RNVC: 9
EM05: RNCC: 7 | RNVC: 2
SM83-05: RNCC: C | RNVC: 1

6 Aug 1985

5975-01-215-7947
Junction Box Cover

012157947
403-C: RNCC: 3 | RNVC: 2
8468C: RNCC: 5 | RNVC: 2
768: RNCC: 5 | RNVC: 2
52C14-5/8: RNCC: 5 | RNVC: 2

31 Aug 1985

5975-01-221-5902
Electrical Equipment Cabinet

012215902
C16C16: RNCC: 3 | RNVC: 2
AB-1616PBC: RNCC: 5 | RNVC: 2

1 Dec 1985

5975-01-259-0720
Nonmetallic Raceway

012590720
E3X2LG6: RNCC: 3 | RNVC: 2

13 Jul 1987

5975-01-260-7960
Electrical Conduit Adapter

012607960
S2182F2262-1-12C: RNCC: 3 | RNVC: 2
GA801HL21F12CC: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-261-2436
Electrical Conduit Adapter

012612436
202C305-13: RNCC: 3 | RNVC: 2
202C305: RNCC: 5 | RNVC: 9

11 Aug 1987

5975-01-264-6691
Stuffing Tube

012646691
CGB-297: RNCC: 3 | RNVC: 9
CB90-44001-44: RNCC: 5 | RNVC: 9

5 Oct 1987

5975-01-265-5116
Flexible Metal Conduit Assembly

012655116
5122605-028-101: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-267-3136
Junction Box

012673136
518918-1: RNCC: 3 | RNVC: 2

9 Nov 1987

5975-01-267-9869
Electrical Cable Support

012679869
S1741B-3-4: RNCC: 3 | RNVC: 2

21 Nov 1987

5975-01-267-9133
Electrical Tie Down Mounting Base

012679133
TM2A-C: RNCC: 3 | RNVC: 2
TM2A: RNCC: 5 | RNVC: 9
SM-A-839355-2: RNCC: 5 | RNVC: 9
5D0061-11: RNCC: 5 | RNVC: 9

19 Nov 1987

5975-01-268-0571
Cable Hanger

012680571
9M895-1: RNCC: 3 | RNVC: 2
9M895-1: RNCC: 5 | RNVC: 2
9M985-1: RNCC: 5 | RNVC: 9
BC6640-165: RNCC: 5 | RNVC: 9
10134272: RNCC: 6 | RNVC: 9

21 Nov 1987

5975-01-270-5547
Electrical Equipment Shelf

012705547
18-00704-001: RNCC: 3 | RNVC: 2

8 Jan 1988

5975-01-271-5667
Flexible Metal Conduit Assembly

012715667
405-10774-1: RNCC: 3 | RNVC: 2

28 Jan 1988

5975-01-277-4371
Flexible Nonmetallic Conduit

012774371
M3505004: RNCC: 3 | RNVC: 2
849181-1: RNCC: 5 | RNVC: 9
68929-R: RNCC: 5 | RNVC: 9

22 Apr 1988

5975-01-277-4372
Flexible Nonmetallic Conduit

012774372
M3505006: RNCC: 3 | RNVC: 2
849181-2: RNCC: 3 | RNVC: 9
68931-R: RNCC: 5 | RNVC: 9

22 Apr 1988

5975-01-281-7165
Electrical Cable Protector

012817165
42420-273: RNCC: 3 | RNVC: 2
42420-273: RNCC: 5 | RNVC: 9
42420-273: RNCC: 5 | RNVC: 9

29 Jun 1988

5975-01-284-1937
Electrical Tie Down Mounting Base

012841937
TA1S8-M: RNCC: 3 | RNVC: 2
087480: RNCC: 5 | RNVC: 1

19 Aug 1988

5975-01-072-0986
Electrical Wall Plate

010720986
SS2: RNCC: 3 | RNVC: 2
S2: RNCC: 3 | RNVC: 9
93071: RNCC: 5 | RNVC: 9

22 Feb 1979

5975-01-075-0571
Electrical Box

010750571
4B69131-104A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-085-1729
Electrical Conduit Bushing

010851729
53G970384-23: RNCC: 3 | RNVC: 2

1 Nov 1979

5975-01-091-1877
Electrical Equipment Mounting Base

010911877
2041441-0102: RNCC: 3 | RNVC: 2
2041441-0102: RNCC: 5 | RNVC: 2
MT6135/APS133: RNCC: 5 | RNVC: 9
2041441-0102: RNCC: 5 | RNVC: 9

3 Mar 1980

5975-01-085-9013
Electrical Conduit Wye

010859013
J1216-01-8: RNCC: 3 | RNVC: 2
GA800RT5018: RNCC: 7 | RNVC: 2

18 Nov 1979

5975-01-087-9650
Electrical Components Tie Down Strap

010879650
53064-5: RNCC: 3 | RNVC: 2

31 Dec 1979

Load More Results