What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 93 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 93 of 176

5975-01-357-9399
Flexible Metal Conduit

013579399
36222: RNCC: 3 | RNVC: 2
LT12: RNCC: 3 | RNVC: 2
LT12: RNCC: 5 | RNVC: 9
LT12-3/4: RNCC: 5 | RNVC: 9
78-2673-12102: RNCC: 5 | RNVC: 9

5 May 1992

5975-01-358-9415
Electrical Tie Down Mounting Base

013589415
VRTH-07A: RNCC: 3 | RNVC: 2
13229E1180: RNCC: 7 | RNVC: 1

23 May 1992

5975-01-361-4845
Tie Down Electric Mounting Base

013614845
ABM1M-A-C: RNCC: 3 | RNVC: 2

17 Jul 1992

5975-01-364-6946
Junction Box

013646946
5385-0: RNCC: 3 | RNVC: 2
889-L: RNCC: 5 | RNVC: 9
5-4-5121: RNCC: 7 | RNVC: 1

23 Sep 1992

5975-01-365-4432
Rigid Metal Conduit

013654432
DAA3514D001-007: RNCC: 3 | RNVC: 2

7 Oct 1992

5975-01-360-7387
Connector Protection Flange

013607387
7100135172: RNCC: 3 | RNVC: 2
TH-8A: RNCC: 3 | RNVC: 2
TH-8A: RNCC: 3 | RNVC: 9
TH-8A: RNCC: 5 | RNVC: 9
TH-8A: RNCC: 5 | RNVC: 9
TH-8A: RNCC: 5 | RNVC: 9

30 Jun 1992

5975-01-367-0821
Electrical-Electronic Equipment Panel

013670821
74A731171-1003: RNCC: 3 | RNVC: 2
74A731171-1003: RNCC: 5 | RNVC: 2
10134310: RNCC: 6 | RNVC: 9

6 Nov 1992

5975-01-366-0326
Electrical Box Connector

013660326
2283: RNCC: 3 | RNVC: 2
13221E8308-3: RNCC: 5 | RNVC: 1
BS-72101: RNCC: D | RNVC: 9

20 Oct 1992

5975-01-370-5069
Electrical Cable Protector

013705069
1348AS1017: RNCC: 3 | RNVC: 2
1348AS1017: RNCC: 5 | RNVC: 9
1348AS1017: RNCC: 5 | RNVC: 9

23 Jan 1993

5975-01-369-9840
Electrical Conduit Union

013699840
UNF400R: RNCC: 3 | RNVC: 2
UNF1005: RNCC: 3 | RNVC: 2

10 Jan 1993

5975-01-373-5942
Cable Hanger

013735942
6259623: RNCC: 3 | RNVC: 2

7 Apr 1993

5975-01-375-8080
Cable Marker Sleeve

013758080
WM-A-Z: RNCC: 3 | RNVC: 2
46F5981: RNCC: 3 | RNVC: 2
PCM-A-C: RNCC: 5 | RNVC: 9

21 May 1993

5975-01-376-4655
Electrical Conduit Adapter

013764655
E942E: RNCC: 3 | RNVC: 9
W-C-1094 TY2: RNCC: 5 | RNVC: 1
UL-651: RNCC: 5 | RNVC: 1
00034481062424: RNCC: 5 | RNVC: 9
W-C-1094: RNCC: 5 | RNVC: 9

3 Jun 1993

5975-01-376-5772
Electrical Conduit Wye

013765772
228419-FB93000A: RNCC: 3 | RNVC: 1
11469469: RNCC: 3 | RNVC: 2

6 Jun 1993

5975-01-380-9477
Electrical-Electronic Equipment Panel

013809477
74A802057-1007: RNCC: 3 | RNVC: 2
74A802057-1007: RNCC: 5 | RNVC: 2
DAA3116A331-039: RNCC: 5 | RNVC: 9
10154473: RNCC: 6 | RNVC: 9

30 Sep 1993

5975-01-386-6508
Bridge Building Frame Longitudinal Girder

013866508
LUBRICANT: RNCC: 3 | RNVC: 2
LUBRICANT: RNCC: 5 | RNVC: 9

10 Feb 1994

5975-01-387-6720
Electrical Equipment Mounting Base

013876720
4290155-501: RNCC: 3 | RNVC: 2
4290155-501: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-389-8923
Electrical Tie Down Mounting Base

013898923
L-5-30MH-9C: RNCC: 3 | RNVC: 2
MBNY-203-9: RNCC: 5 | RNVC: 9
559997-101: RNCC: 5 | RNVC: 9
G470082-14: RNCC: 7 | RNVC: 2

5 May 1994

5975-01-325-3953
Electrical Equipment Mounting Base

013253953
68A870832-1001: RNCC: 3 | RNVC: 2

4 Sep 1990

5975-01-326-3999
Fanning Strip

013263999
LS5957A006: RNCC: 3 | RNVC: 2

23 Sep 1990

5975-01-328-4053
Electrical Wall Plate

013284053
NP2I: RNCC: 3 | RNVC: 2
P2: RNCC: 5 | RNVC: 9
S92072: RNCC: 5 | RNVC: 9

1 Nov 1990

5975-01-328-8542
Electrical Conductor Bushing

013288542
G70685-12: RNCC: 3 | RNVC: 2
GB840Y12: RNCC: 7 | RNVC: 2

8 Nov 1990

5975-01-328-8986
Junction Box

013288986
9004-639: RNCC: 3 | RNVC: 2
9004-639: RNCC: 5 | RNVC: 9

9 Nov 1990

5975-01-335-9840
Electrical Components Tie Down Strap

013359840
PRT4S-C0 BLACK: RNCC: 3 | RNVC: 2
PRT4S-C NATURAL: RNCC: 3 | RNVC: 2
PRT4S: RNCC: 5 | RNVC: 9

17 Mar 1991

5975-01-338-9481
Blank Panel

013389481
PA-1133: RNCC: 3 | RNVC: 9

14 May 1991

5975-01-396-4372
Electrical Box Connector

013964372
2920: RNCC: 3 | RNVC: 2
2920: RNCC: 7 | RNVC: 1

20 Sep 1994

5975-01-399-8551
Junction Box

013998551
660: RNCC: 3 | RNVC: 2
5A12337H04: RNCC: C | RNVC: 1

6 Dec 1994

5975-01-406-5320
Insulator Pin

014065320
62358-1: RNCC: 3 | RNVC: 2

5 Jan 1995

5975-01-407-8851
Electrical Conduit Adapter

014078851
2633762-1: RNCC: 3 | RNVC: 2
S1816F2806: RNCC: 5 | RNVC: 9
S1816F2806-8: RNCC: 5 | RNVC: 9
2633762: RNCC: 7 | RNVC: 2

7 Feb 1995

5975-01-408-3021
Stuffing Tube

014083021
803-4384536-1XXX-76: RNCC: 3 | RNVC: 2
803-4384536-2XXX-76: RNCC: 5 | RNVC: 2

14 Feb 1995

5975-01-411-5623
Electrical-Electronic Equipment Chassis

014115623
A3088273: RNCC: 3 | RNVC: 2

28 Mar 1995

5975-01-415-0986
Flexible Nonmetallic Conduit

014150986
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1107: RNCC: 3 | RNVC: 2
AMS-T-81914/5-1107-BLK: RNCC: 5 | RNVC: 1
M81914/5-1107: RNCC: 5 | RNVC: 9
AMS-T-81914/5-1107-BLK: RNCC: 5 | RNVC: 9

20 Jun 1995

5975-01-416-3361
Protection Connector Kit

014163361
6317971-025: RNCC: 1 | RNVC: 2
HCPS-109: RNCC: 3 | RNVC: 9
HCPS-109: RNCC: 5 | RNVC: 2
HCPS-109: RNCC: 5 | RNVC: 9
HCPS-109: RNCC: 5 | RNVC: 9
HCPS-109: RNCC: 5 | RNVC: 9

17 Jul 1995

5975-01-422-6393
Electrical Nonmetallic Conduit Assembly

014226393
R58HB33B34A020: RNCC: 3 | RNVC: 2
R58HB33B34A020: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-423-5501
Electrical Components Tie Down Strap

014235501
MS3368-4-1D: RNCC: 2 | RNVC: 2
AS23190: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 1
TY46MT-1: RNCC: 5 | RNVC: 1
MS3368-4-1D: RNCC: 5 | RNVC: 1
MS3368-4-1D: RNCC: 5 | RNVC: 9
PL3M2S: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 9

31 Dec 1995

5975-01-430-7132
Electrical Conduit Tee

014307132
5N-9065: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-436-4627
Flexible Nonmetallic Conduit

014364627
HCTE-0500-0-SP: RNCC: 3 | RNVC: 2
HCTE-0500-0: RNCC: 5 | RNVC: 9
A3249066-1: RNCC: 5 | RNVC: 9
A3249066: RNCC: 5 | RNVC: 9
058574-03: RNCC: C | RNVC: 1

19 Sep 1996

5975-01-436-8555
Metallic Raceway Assembly

014368555
5A8-06927: RNCC: 3 | RNVC: 2
3075AS232-1: RNCC: 7 | RNVC: 2

30 Sep 1996

5975-01-439-0212
Electrical-Electronic Equipment Chassis

014390212
3091AS934-1: RNCC: 3 | RNVC: 2
10823-396: RNCC: 5 | RNVC: 2
3091AS934-1: RNCC: 5 | RNVC: 2
3091AS934-1: RNCC: 5 | RNVC: 9

25 Nov 1996

5975-01-442-9409
Electrical Insulation Sleeving

014429409
TMS-SCE-1.5-2.0-9: RNCC: 3 | RNVC: 1
TMS-SCE-1-2.0-9: RNCC: 3 | RNVC: 2
10652298-008: RNCC: 5 | RNVC: 2
TMS-SCE-1.0-2.0-9: RNCC: 5 | RNVC: 2

27 Mar 1997

5975-01-435-5647
Flexible Metal Conduit Assembly

014355647
1836AS620-14: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-446-2920
Flexible Nonmetallic Conduit

014462920
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1110B: RNCC: 3 | RNVC: 2
M81914/5-1110 BLK: RNCC: 5 | RNVC: 9

27 Jun 1997

5975-01-447-3267
Flexible Nonmetallic Conduit

014473267
R68236: RNCC: 3 | RNVC: 2

2 Aug 1997

5975-01-449-3504
Electronic Equipment Mounting Tray

014493504
08-64100-1: RNCC: 3 | RNVC: 2
08-64100-1: RNCC: 5 | RNVC: 9

29 Sep 1997

5975-01-451-3718
Cable Hanger

014513718
101-107-457: RNCC: 3 | RNVC: 2

15 Dec 1997

5975-01-453-0128
Flexible Metal Conduit Assembly

014530128
57350-29FT0IN: RNCC: 3 | RNVC: 2
57350-29: RNCC: 5 | RNVC: 9

17 Feb 1998

5975-01-455-4853
Electronic Equipment Mounting Tray

014554853
3036AS384: RNCC: 3 | RNVC: 1
3036AS384: RNCC: 3 | RNVC: 2

5 May 1998

5975-01-456-5746
Electrical Box Connector

014565746
SHC-1026: RNCC: 3 | RNVC: 2
A3178934-2: RNCC: 5 | RNVC: 9
73-2729882-1: RNCC: 5 | RNVC: 9
SHC1026: RNCC: 5 | RNVC: 9

18 Jun 1998

5975-01-458-5934
Mounting Strap Assy

014585934
704AS4032: RNCC: 3 | RNVC: 1
704AS4032: RNCC: 3 | RNVC: 2

1 Sep 1998

5975-01-460-4972
Flexible Nonmetallic Conduit

014604972
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1014: RNCC: 3 | RNVC: 2
M81914/1-1014: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

6 Nov 1998

5975-01-461-4328
Flexible Metal Conduit Assembly

014614328
227731-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-7564
Stuffing Tube

014617564
M24235/14-127: RNCC: 2 | RNVC: 2
MIL-T-81714/14: RNCC: 4 | RNVC: 1
RO0031: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-461-7562
Stuffing Tube

014617562
MIL-T-81714/14: RNCC: 4 | RNVC: 1
M24235/14-125: RNCC: 5 | RNVC: 2
RO0038A: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-461-7577
Stuffing Tube

014617577
M24235/15-006: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-9865
Electrical Conduit Ferrule Anchor Plate

014619865
GS575S1: RNCC: 3 | RNVC: 2

14 Jan 1999

5975-01-462-5176
Electrical-Electronic Equipment Chassis

014625176
DE100I-CS: RNCC: 3 | RNVC: 9
7084559: RNCC: C | RNVC: 1

5 Feb 1999

5975-01-462-3975
Junction Box

014623975
3133575: RNCC: 3 | RNVC: 2
3133575: RNCC: 5 | RNVC: 9

2 Feb 1999

5975-01-462-7217
Stuffing Tube

014627217
1945.6 SIZE F TYPE 66: RNCC: 3 | RNVC: 2
1945.6 SIZE A TYPE 66: RNCC: 5 | RNVC: 9
9000S620274269: RNCC: 5 | RNVC: 9
9000S620274269-116: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7228
Stuffing Tube

014627228
1945.13 SIZE P TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-123: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1945.13 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7232
Stuffing Tube

014627232
1945.16 SIZE T TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-126: RNCC: 5 | RNVC: 2
1945.16 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-463-3173
Flexible Metal Conduit Assembly

014633173
254844-1005: RNCC: 3 | RNVC: 2

16 Mar 1999

5975-01-360-7384
Connector Pr Flange

013607384
TH-5D: RNCC: 3 | RNVC: 2
TH-5D: RNCC: 3 | RNVC: 9
TH-5D: RNCC: 5 | RNVC: 9
TH-5D: RNCC: 5 | RNVC: 9
TH-5D: RNCC: 5 | RNVC: 9

30 Jun 1992

5975-01-367-0902
Flexible Metal Conduit Assembly

013670902
750-070-006: RNCC: 3 | RNVC: 2
11468897-006: RNCC: 7 | RNVC: 2

6 Nov 1992

5975-01-378-1147
Flexible Metal Conduit Assembly

013781147
57350-10FT0IN: RNCC: 3 | RNVC: 2
POD-57350-10: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-436-2767
Electrical Conduit Elbow

014362767
LMFL90-125: RNCC: 3 | RNVC: 9
1764AS331-4: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-436-2752
Electrical Conductor Bushing

014362752
1741AS730-4: RNCC: 3 | RNVC: 2
1741AS730-4: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-430-7136
Electrical Conduit Adapter

014307136
5N-8943: RNCC: 3 | RNVC: 2
41319: RNCC: C | RNVC: 1

2 May 1996

5975-01-432-0941
Metallic Raceway

014320941
741183-A00: RNCC: 3 | RNVC: 2
741183-A: RNCC: 5 | RNVC: 9
8-48-7: RNCC: 5 | RNVC: 9

24 May 1996

5975-01-434-0348
Electrical Nonmetallic Conduit Assembly

014340348
R58HB08F49W072A: RNCC: 3 | RNVC: 2
R58HB08F49W072A: RNCC: 5 | RNVC: 2
R58HB08F49W072A: RNCC: 5 | RNVC: 2
R58HB08F49W072A: RNCC: 5 | RNVC: 9

17 Jul 1996

5975-01-435-5640
Flexible Metal Conduit Assembly

014355640
1836AS620-8: RNCC: 3 | RNVC: 2
CA00168-8: RNCC: 5 | RNVC: 2

27 Aug 1996

5975-01-444-8616
Cord Assembly Fastener

014448616
P-4891-4: RNCC: 3 | RNVC: 2

19 May 1997

5975-01-451-2087
Rigid Metal Conduit Assembly

014512087
68A250649-2051: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-327-3947
Cable Channel

013273947
7241541-07: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-430-7111
Cable Collar

014307111
5N-9069: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-432-1444
Blank Panel

014321444
A24P24: RNCC: 3 | RNVC: 2

28 May 1996

5975-01-432-4119
Conduit Outlet

014324119
5337-0: RNCC: 3 | RNVC: 2
11B254100: RNCC: 7 | RNVC: 2

5 Jun 1996

5975-01-434-5673
Electronic Equipment Mounting Tray

014345673
2119532-1-1: RNCC: 3 | RNVC: 2
2119532-1-1: RNCC: 3 | RNVC: 2

1 Aug 1996

5975-01-435-1586
Electrical Conduit Adapter

014351586
1836AS610: RNCC: 3 | RNVC: 2
1836AS610: RNCC: 5 | RNVC: 2

15 Aug 1996

5975-01-435-3584
Flexible Metal Conduit Assembly

014353584
254647-0004: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-01-288-2860
Electrical Conduit Coupling

012882860
7150K41: RNCC: 3 | RNVC: 2
7150K4: RNCC: 5 | RNVC: 9

4 Nov 1988

5975-01-289-5972
Electrical Box Connector

012895972
2916360: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-289-5963
Electrical Conduit Adapter

012895963
3AD250AA1212AD: RNCC: 3 | RNVC: 2
150314: RNCC: 3 | RNVC: 2

27 Nov 1988

5975-01-288-6678
Blank Panel

012886678
A16P16: RNCC: 3 | RNVC: 2
E-16P16: RNCC: 5 | RNVC: 9
NP-1616: RNCC: 5 | RNVC: 9

11 Nov 1988

5975-01-290-9836
Blank Panel

012909836
8050845-0502: RNCC: 3 | RNVC: 2

21 Dec 1988

5975-01-291-0374
Electrical Grounding Plate

012910374
61-2045-1: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-01-292-5103
Electrical Conduit Adapter

012925103
247AS31-232-001: RNCC: 3 | RNVC: 2

18 Jan 1989

5975-01-294-2136
Cable Hanger

012942136
101-107-449: RNCC: 3 | RNVC: 2

13 Feb 1989

5975-01-296-6056
Fanning Strip

012966056
7517533-05: RNCC: 3 | RNVC: 9
7517533-05: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7089
Fanning Strip

012967089
7517533-01: RNCC: 3 | RNVC: 9
7517533-01: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7091
Fanning Strip

012967091
7517533-03: RNCC: 3 | RNVC: 9
7517533-03: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-298-1509
Flexible Nonmetallic Conduit

012981509
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1006: RNCC: 3 | RNVC: 2
M81914/1-1006: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

12 Apr 1989

5975-01-298-6701
Flexible Conduit Assembly

012986701
5188105-3: RNCC: 1 | RNVC: 2
5188105-3: RNCC: 3 | RNVC: 2
759-192-3: RNCC: 3 | RNVC: 2
206-3: RNCC: 3 | RNVC: 2
206003-DI0350: RNCC: 5 | RNVC: 9

19 Apr 1989

5975-01-298-8564
Electrical Conduit Adapter

012988564
100218-FB6200: RNCC: 3 | RNVC: 2
G63164-37: RNCC: 5 | RNVC: 2
100235-0037: RNCC: 5 | RNVC: 9
10250710-37: RNCC: 7 | RNVC: 2

22 Apr 1989

5975-01-300-4599
Flexible Nonmetallic Conduit

013004599
450016C1: RNCC: 3 | RNVC: 2
450016C1: RNCC: 5 | RNVC: 9
441735C1: RNCC: 5 | RNVC: 9

14 May 1989

5975-01-302-9633
Flexible Metal Conduit Assembly

013029633
10250675-111: RNCC: 3 | RNVC: 2
750-011NF48-93: RNCC: 5 | RNVC: 9

22 Jun 1989

5975-01-304-0074
Electrical Conduit Adapter

013040074
J1378-16TS40-2F-34: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-01-305-1334
Electrical Components Tie Down Strap

013051334
29247-001: RNCC: 3 | RNVC: 2
29247-001: RNCC: 5 | RNVC: 2

1 Aug 1989

5975-01-308-8386
Electrical Conduit Adapter

013088386
G63164-3: RNCC: 3 | RNVC: 2
100235-0003: RNCC: 3 | RNVC: 2
CH09-0340-403: RNCC: 5 | RNVC: 9
663164-1: RNCC: 5 | RNVC: 9
10250710-3: RNCC: 7 | RNVC: 2

5 Oct 1989

5975-01-310-9625
Cable Collar

013109625
12296736-1: RNCC: 3 | RNVC: 2
12296736: RNCC: D | RNVC: 9

16 Nov 1989

5975-01-312-9500
Electrical-Electronic Equipment Panel

013129500
74A802057-1005: RNCC: 3 | RNVC: 2
74A802057-1005: RNCC: 5 | RNVC: 9
10154469: RNCC: 6 | RNVC: 9

27 Dec 1989

5975-01-311-5095
Electrical Components Tie Down Strap

013115095
PLT2M-C30: RNCC: 3 | RNVC: 2
PLT2M-30: RNCC: 5 | RNVC: 1
PLT2M-C30: RNCC: 5 | RNVC: 2
696-41044-0: RNCC: 5 | RNVC: 2
91660776: RNCC: 5 | RNVC: 2
99206551: RNCC: 5 | RNVC: 2
1812185-2: RNCC: C | RNVC: 1

29 Nov 1989

5975-01-315-7802
Electrical Conduit Coupling

013157802
2928: RNCC: 3 | RNVC: 2
TWC-200CS: RNCC: 5 | RNVC: 9

23 Feb 1990

5975-01-317-7208
Electrical-Electronic Equipment Panel

013177208
2993012-1: RNCC: 3 | RNVC: 2
2993012-1: RNCC: 5 | RNVC: 2

4 Apr 1990

5975-01-345-2869
Electrical Components Tie Down Strap

013452869
WIT-18SF: RNCC: 3 | RNVC: 2
WIT-18SF: RNCC: 3 | RNVC: 9

15 Sep 1991

5975-01-335-8929
Electrical Conduit Elbow

013358929
2652: RNCC: 3 | RNVC: 2
81-DC: RNCC: 5 | RNVC: 2

15 Mar 1991

5975-01-349-3618
Ground Rod

013493618
87034A1020: RNCC: 3 | RNVC: 2

23 Nov 1991

5975-01-353-3190
Stuffing Tube

013533190
RSPV-9107-LR: RNCC: 3 | RNVC: 2
NCGE1231-SG: RNCC: 5 | RNVC: 2
13229E0753-4: RNCC: 7 | RNVC: 2

9 Feb 1992

5975-01-360-1776
Rigid Metal Conduit Assembly

013601776
9275814: RNCC: 3 | RNVC: 2

19 Jun 1992

5975-01-361-5082
Electrical Equipment Mounting Base

013615082
7167-64211-1: RNCC: 3 | RNVC: 2

18 Jul 1992

5975-01-361-7093
Flexible Metal Conduit Assembly

013617093
71824-15: RNCC: 3 | RNVC: 2
S81919B-03CG-M15: RNCC: 3 | RNVC: 2
S81919B-03-M15: RNCC: 5 | RNVC: 9
S81919B-03CG-M15: RNCC: 5 | RNVC: 9
5223493-15: RNCC: 7 | RNVC: 2

24 Jul 1992

5975-01-356-8033
Electrical Components Tie Down Strap

013568033
MLT2H-LP: RNCC: 3 | RNVC: 2
FR-98670103601: RNCC: 5 | RNVC: 2
9M896-2H: RNCC: 5 | RNVC: 2

10 Apr 1992

5975-01-355-7103
Stuffing Tube

013557103
NCGB2233-SG: RNCC: 3 | RNVC: 2
13229E0738-2: RNCC: 7 | RNVC: 2

21 Mar 1992

5975-01-362-5205
Flexible Nonmetallic Conduit

013625205
EFC100: RNCC: 3 | RNVC: 1
EFC100: RNCC: 3 | RNVC: 2
94-1332030-3: RNCC: 5 | RNVC: 1
94-1332030-3: RNCC: 5 | RNVC: 9

8 Aug 1992

5975-01-370-0442
Nonmetallic Raceway

013700442
35-2-125: RNCC: 3 | RNVC: 2
SW25939: RNCC: 7 | RNVC: 2

12 Jan 1993

5975-01-371-5572
Electrical-Electronic Equipment Chassis

013715572
A3168053-1: RNCC: 3 | RNVC: 2

18 Feb 1993

5975-01-375-2396
Conduit Chase Nipple

013752396
6-1-8122: RNCC: 3 | RNVC: 2
6-1-8122: RNCC: 5 | RNVC: 2
6-1-8122: RNCC: 5 | RNVC: 2
6-1-8122: RNCC: 5 | RNVC: 9

7 May 1993

5975-01-378-0988
Flexible Metal Conduit Assembly

013780988
57350-2FT0IN: RNCC: 3 | RNVC: 2
57350-2: RNCC: 5 | RNVC: 1
POD-57350-02: RNCC: 5 | RNVC: 1

11 Aug 1993

5975-01-382-7394
Electrical Conduit Elbow

013827394
101000: RNCC: 3 | RNVC: 2
G63159-4: RNCC: 3 | RNVC: 2
CH09-0340-004: RNCC: 5 | RNVC: 9
150134: RNCC: 5 | RNVC: 9
10250674-4: RNCC: 7 | RNVC: 2

9 Nov 1993

5975-01-386-0298
Electrical Conductor Protector

013860298
12937484: RNCC: 3 | RNVC: 2

26 Jan 1994

5975-01-386-8442
Electrical Cable Nipple

013868442
23513: RNCC: 3 | RNVC: 2
SW34329: RNCC: 7 | RNVC: 2

17 Feb 1994

5975-01-389-8934
Electrical Wall Plate

013898934
86004: RNCC: 3 | RNVC: 9

5 May 1994

5975-01-389-9319
Electrical Nonmetallic Conduit Assembly

013899319
57350-27FTOIN: RNCC: 3 | RNVC: 2
57350-27: RNCC: 5 | RNVC: 9

7 May 1994

5975-01-389-3893
Cable Hanger

013893893
2111007-437: RNCC: 3 | RNVC: 2

23 Apr 1994

5975-01-391-7176
Electrical Nonmetallic Conduit Assembly

013917176
57350-24FT0IN: RNCC: 3 | RNVC: 2
57350-24: RNCC: 5 | RNVC: 9

16 Jun 1994

5975-01-328-8120
Cable Channel

013288120
7241542-01: RNCC: 3 | RNVC: 2

7 Nov 1990

5975-01-329-8109
Electrical Conduit Sealing Fitting

013298109
XYC3M: RNCC: 3 | RNVC: 2

24 Nov 1990

5975-01-331-6471
Electrical-Electronic Equipment Chassis

013316471
62005223: RNCC: 3 | RNVC: 9

22 Dec 1990

5975-01-343-4067
Electrical Equipment Foot

013434067
5041-8801: RNCC: 3 | RNVC: 9
5041-8801: RNCC: 5 | RNVC: 9
5041-8801: RNCC: C | RNVC: 1

13 Aug 1991

5975-01-398-0184
Blank Panel

013980184
378176-1: RNCC: 3 | RNVC: 2
378176-1: RNCC: 5 | RNVC: 2

22 Oct 1994

5975-01-392-6123
Flexible Metal Conduit Assembly

013926123
5909558-7: RNCC: 1 | RNVC: 2
229385-D10160: RNCC: 3 | RNVC: 2
759-245-02: RNCC: 5 | RNVC: 2
759-245-02: RNCC: 5 | RNVC: 9

1 Jul 1994

5975-01-392-6124
Flexible Metal Conduit Assembly

013926124
5909558-5: RNCC: 1 | RNVC: 2
759-245-01: RNCC: 3 | RNVC: 2
229385-D10115: RNCC: 3 | RNVC: 2
759-245-01: RNCC: 5 | RNVC: 9

1 Jul 1994

5975-01-398-6915
Electrical Equipment Mounting Base

013986915
13262: RNCC: 3 | RNVC: 2
13262: RNCC: 5 | RNVC: 2
13262: RNCC: 5 | RNVC: 2

8 Nov 1994

5975-01-413-1547
Electrical Equipment Shelf

014131547
A3050664-1: RNCC: 3 | RNVC: 2

6 May 1995

5975-01-416-8564
Electrical-Electronic Equipment Panel

014168564
DAA3383A293-101: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-01-429-6818
Electrical Components Tie Down Strap

014296818
11437862-1: RNCC: 3 | RNVC: 2

16 Apr 1996

5975-01-436-2766
Electrical Conduit Elbow

014362766
LMFL90-200: RNCC: 3 | RNVC: 9
1764AS331-5: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-440-0700
Electrical Components Tie Down Strap

014400700
170075: RNCC: 3 | RNVC: 2

2 Jan 1997

5975-01-440-0723
Cable Hanger

014400723
20823-674: RNCC: 3 | RNVC: 2

2 Jan 1997

5975-01-440-5808
Junction Box

014405808
6618013: RNCC: 3 | RNVC: 2
6618013: RNCC: 5 | RNVC: 9

17 Jan 1997

5975-01-446-5260
Electrical Standardized Components Case

014465260
58038-03: RNCC: 3 | RNVC: 2

8 Jul 1997

5975-01-448-4535
Cable Hanger

014484535
101-107-460: RNCC: 3 | RNVC: 1
CRES 316 4.5 IN. LG BAR: RNCC: 3 | RNVC: 1
CRS-SS316/101-107-407: RNCC: 3 | RNVC: 2

29 Aug 1997

5975-01-435-5649
Flexible Metal Conduit Assembly

014355649
1836AS620-5: RNCC: 3 | RNVC: 2

27 Aug 1996

5975-01-453-0042
Flexible Metal Conduit Assembly

014530042
57350-33FT0IN: RNCC: 3 | RNVC: 2
57530-33: RNCC: 5 | RNVC: 9

17 Feb 1998

5975-01-453-0158
Flexible Metal Conduit Assembly

014530158
57350-40FT0IN: RNCC: 3 | RNVC: 2
57350-40: RNCC: 5 | RNVC: 9

17 Feb 1998

5975-01-453-6328
Electrical Conduit Wye

014536328
3359AS620-2F: RNCC: 3 | RNVC: 2
BX0512-2F-AS: RNCC: 3 | RNVC: 2
3359AS620-2F: RNCC: 5 | RNVC: 9
3359AS620-2F: RNCC: 5 | RNVC: 9

6 Mar 1998

5975-01-455-3713
Electrical-Electronic Equipment Chassis

014553713
988-5665-001: RNCC: 3 | RNVC: 2

30 Apr 1998

5975-01-456-4750
Flexible Metal Conduit Assembly

014564750
227633-DL0000: RNCC: 3 | RNVC: 2

15 Jun 1998

5975-01-456-5055
Flexible Metal Conduit Assembly

014565055
227632-DL0000: RNCC: 3 | RNVC: 2

16 Jun 1998

5975-01-456-8548
Rigid Nonmetallic Conduit

014568548
7125811: RNCC: 3 | RNVC: 2
7125811: RNCC: 5 | RNVC: 9

29 Jun 1998

5975-01-458-4588
Raceway Cover

014584588
94043000000: RNCC: 3 | RNVC: 2

27 Aug 1998

5975-01-458-1946
Electrical Cable Protector

014581946
12976350: RNCC: 3 | RNVC: 2

17 Aug 1998

5975-01-458-8727
Junction Box

014588727
A-604CH: RNCC: 3 | RNVC: 2
A-604CH: RNCC: 5 | RNVC: 2
A-604CH: RNCC: 5 | RNVC: 2
A-604CH: RNCC: 5 | RNVC: 9

14 Sep 1998

5975-01-461-4357
Flexible Metal Conduit Assembly

014614357
227710-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-6175
Junction Box

014616175
MT-001: RNCC: 3 | RNVC: 2

21 Dec 1998

5975-01-462-1821
Stuffing Tube

014621821
M24235/14-133: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

25 Jan 1999

5975-01-462-7220
Stuffing Tube

014627220
1945.1 SIZE A TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 9
9000S620274269-111: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7313
Stuffing Tube

014627313
1990.14 SIZE R TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269-154: RNCC: 5 | RNVC: 1
9000S620274269: RNCC: 5 | RNVC: 1
1990.14 SIZE A TYPE 67: RNCC: 5 | RNVC: 9

16 Feb 1999

5975-01-462-9851
Stuffing Tube

014629851
M24235/13-152: RNCC: 2 | RNVC: 2
MIL-T-81714/13: RNCC: 4 | RNVC: 1
RO0009A: RNCC: 5 | RNVC: 9
RO0009B: RNCC: 5 | RNVC: 9
RO0009: RNCC: 5 | RNVC: 9

1 Mar 1999

5975-01-285-0192
Electrical Conduit Bushing

012850192
A0005453545: RNCC: 3 | RNVC: 2
000 545 35 45 KZ: RNCC: 5 | RNVC: 9

4 Sep 1988

5975-01-285-1154
Electrical Tie Down Mounting Base

012851154
LHMS-S10-D: RNCC: 3 | RNVC: 2
LHMS-S10: RNCC: 5 | RNVC: 2
LHMSS10: RNCC: 5 | RNVC: 9

7 Sep 1988

5975-01-285-9127
Electrical Equipment Rack

012859127
2800359-1: RNCC: 3 | RNVC: 2
1HD0100: RNCC: 5 | RNVC: 2
2800359-1: RNCC: 5 | RNVC: 9

22 Sep 1988

5975-01-285-6574
Electrical Conduit Adapter

012856574
S82311S090603EN: RNCC: 3 | RNVC: 2
RP2311-09-06-03: RNCC: 5 | RNVC: 2

18 Sep 1988

5975-01-285-9831
Electrical Cable Protector

012859831
12345520: RNCC: 3 | RNVC: 2
5975012859831: RNCC: 6 | RNVC: 9

23 Sep 1988

5975-01-288-3013
Electrical Tie Down Mounting Base

012883013
TC502: RNCC: 3 | RNVC: 2
LPMS-S8-C: RNCC: 5 | RNVC: 2

4 Nov 1988

5975-01-288-3097
Cable Hanger

012883097
1716084 ASSY 7 TYPE 8: RNCC: 3 | RNVC: 2
1716084 ASSY 7, TY 8: RNCC: 5 | RNVC: 9

4 Nov 1988

5975-01-288-2856
Electrical Conduit Elbow

012882856
F22LE9C: RNCC: 3 | RNVC: 2

4 Nov 1988

5975-01-288-9602
Electrical Conduit Coupling

012889602
A1022A157-1: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-291-0961
Blank Panel

012910961
3605-5-1: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-01-291-8280
Flexible Metal Conduit

012918280
55-09-38-01: RNCC: 3 | RNVC: 2
X050001001: RNCC: 5 | RNVC: 9
55-09-38-01: RNCC: 5 | RNVC: 9

6 Jan 1989

5975-01-294-6412
Electrical-Electronic Equipment Panel

012946412
962657-101: RNCC: 3 | RNVC: 2

19 Feb 1989

5975-01-296-0631
Electrical Conductor Bushing

012960631
74B878001-111: RNCC: 1 | RNVC: 2
CT0904-06C: RNCC: 3 | RNVC: 2
74B878001-111: RNCC: 5 | RNVC: 2
CT0904-111: RNCC: 5 | RNVC: 9
10134278: RNCC: 6 | RNVC: 9

16 Mar 1989

5975-01-296-7101
Flexible Metal Conduit Assembly

012967101
750-011NF32-174: RNCC: 3 | RNVC: 1
251020-01740: RNCC: 3 | RNVC: 1
200188-DI1740: RNCC: 3 | RNVC: 1
10250675-90: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-298-3662
Junction Box

012983662
CU3284: RNCC: 3 | RNVC: 2
CU284: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-299-7631
Flexible Metal Conduit Assembly

012997631
750-011NF20-24: RNCC: 3 | RNVC: 1
200186-DI0240: RNCC: 3 | RNVC: 1
10250675-68: RNCC: 3 | RNVC: 2
CH10-0340-168: RNCC: 5 | RNVC: 9
10250675: RNCC: D | RNVC: 9

5 May 1989

5975-01-301-5817
Junction Box

013015817
2483073: RNCC: 3 | RNVC: 2

1 Jun 1989

5975-01-302-8291
Flexible Metal Conduit Assembly

013028291
750-011NF12-55.5: RNCC: 3 | RNVC: 1
200205-DI0555: RNCC: 3 | RNVC: 1
10250675-51: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-304-1714
Cable Hanger

013041714
101-107-399: RNCC: 3 | RNVC: 2
101-107-068: RNCC: 5 | RNVC: 9
5975PL1264690: RNCC: 6 | RNVC: 9

13 Jul 1989

5975-01-304-6322
Electrical Conduit Adapter

013046322
S2182F1537-1-12C: RNCC: 3 | RNVC: 2
GA801HL17F12CA: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-305-4593
Cable Hanger

013054593
260399: RNCC: 3 | RNVC: 2

5 Aug 1989

5975-01-307-3609
Blank Panel

013073609
2037923-0503: RNCC: 3 | RNVC: 1
2037923-0503: RNCC: 3 | RNVC: 2

9 Sep 1989

5975-01-308-8387
Cable Strain Relief Bushing

013088387
123-479: RNCC: 3 | RNVC: 2
123A479: RNCC: 5 | RNVC: 9

5 Oct 1989

5975-01-313-8185
Electrical Conduit Adapter

013138185
G63164-34: RNCC: 3 | RNVC: 2
100235-0034: RNCC: 5 | RNVC: 2
100215-FB6200: RNCC: 5 | RNVC: 2
10250710: RNCC: 7 | RNVC: 1
10250710-34: RNCC: 7 | RNVC: 2

18 Jan 1990

5975-01-313-8211
Junction Box

013138211
A1008CHNF: RNCC: 3 | RNVC: 2
515643-1: RNCC: 7 | RNVC: 2
A-10PB: RNCC: C | RNVC: 1
A1008CHNNF: RNCC: C | RNVC: 1

18 Jan 1990

5975-01-314-9521
Rigid Metal Conduit Assembly

013149521
74A782421-1007: RNCC: 3 | RNVC: 2
10134312: RNCC: 6 | RNVC: 9

9 Feb 1990

5975-01-316-6102
Electrical-Electronic Equipment Panel

013166102
DAA3383A497-001: RNCC: 3 | RNVC: 2

13 Mar 1990

5975-01-316-4544
Conduit Outlet

013164544
OELL2: RNCC: 3 | RNVC: 2

9 Mar 1990

5975-01-317-1615
Electrical Conduit Locknut

013171615
1006: RNCC: 3 | RNVC: 2
105-S: RNCC: 5 | RNVC: 9
1-150S: RNCC: 5 | RNVC: 9

23 Mar 1990

5975-01-317-4322
Electrical Conduit Adapter

013174322
J1378-15TS40-2F-34: RNCC: 3 | RNVC: 2
J1378-15JS40-2F-: RNCC: C | RNVC: 1

30 Mar 1990

5975-01-319-2653
Electrical-Electronic Equipment Panel

013192653
5002225-1: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-319-8114
Stuffing Tube

013198114
M24235/14-004 BRASS: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-321-7295
Junction Box Cover

013217295
7731428: RNCC: 3 | RNVC: 9
T204855: RNCC: 5 | RNVC: 1

23 Jun 1990

5975-01-322-4652
Electrical-Electronic Equipment Panel

013224652
8070000259-1: RNCC: 3 | RNVC: 9

6 Jul 1990

5975-01-322-6362
Electrical Conduit Nipple

013226362
AN-2: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-324-4559
Electrical Conduit Coupling

013244559
5120: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-343-4447
Electrical Equipment Mounting Base

013434447
622-9723-001: RNCC: 3 | RNVC: 2
GB500T1: RNCC: 5 | RNVC: 2
GB500T: RNCC: D | RNVC: 9

14 Aug 1991

5975-01-350-4648
Electrical Equipment Mounting Base

013504648
75A800344-1003: RNCC: 3 | RNVC: 2

17 Dec 1991

5975-01-351-0996
Stuffing Tube

013510996
M19622/7-004: RNCC: 2 | RNVC: 2
MIL-S-19622: RNCC: 4 | RNVC: 1

31 Dec 1991

5975-01-355-4570
Electrical Components Tie Down Strap

013554570
08-404: RNCC: 3 | RNVC: 2

18 Mar 1992

5975-01-355-8128
Electrical Box Connector

013558128
12387119-3: RNCC: 1 | RNVC: 2
ISOHJ150TKA13-1: RNCC: 3 | RNVC: 2
HT7906-13-6-8: RNCC: 5 | RNVC: 2
447HL791ME13: RNCC: 5 | RNVC: 2
901-423R356: RNCC: 5 | RNVC: 2
447HL791MA13: RNCC: 5 | RNVC: 9
3M7906-13-6-8: RNCC: 5 | RNVC: 9
3M7906-13-6-8: RNCC: 5 | RNVC: 9
44HL791ME13: RNCC: 5 | RNVC: 9
3M7906-13-6-8: RNCC: 5 | RNVC: 9

24 Mar 1992

5975-01-356-5722
Electrical Box Connector

013565722
TCFS-48-19B-320-25BW: RNCC: 3 | RNVC: 2
12370792: RNCC: 7 | RNVC: 2

7 Apr 1992

5975-01-355-9744
Cable Hanger

013559744
4-195-9-00114: RNCC: 3 | RNVC: 2
2HG44: RNCC: 5 | RNVC: 2

27 Mar 1992

5975-01-356-6962
Electrical Components Tie Down Strap

013566962
9M896-4H: RNCC: 3 | RNVC: 1
MLT4H-LP: RNCC: 3 | RNVC: 2
0241 1558: RNCC: 5 | RNVC: 2
ASNA2413-4: RNCC: 5 | RNVC: 2
MLT4H-LP: RNCC: 5 | RNVC: 2

9 Apr 1992

5975-01-357-1564
Electrical-Electronic Equipment Panel

013571564
12346525: RNCC: 3 | RNVC: 2

17 Apr 1992

5975-01-358-0158
Electrical Components Tie Down Strap

013580158
6-850-000784: RNCC: 3 | RNVC: 2
78-6210-80644: RNCC: 5 | RNVC: 2
2HG190: RNCC: C | RNVC: 1

6 May 1992

5975-01-364-9601
Electrical-Electronic Equipment Chassis

013649601
1348AS145: RNCC: 3 | RNVC: 2
1348AS145: RNCC: 5 | RNVC: 2
1348AS145: RNCC: 5 | RNVC: 2
1348AS145: RNCC: 5 | RNVC: 2

28 Sep 1992

5975-01-367-9501
Guard Cable Actuator

013679501
MBEU142177: RNCC: 3 | RNVC: 2
MBEU142177: RNCC: 5 | RNVC: 2
10177806: RNCC: 6 | RNVC: 9

21 Nov 1992

5975-01-369-5176
Junction Box

013695176
6063341: RNCC: 3 | RNVC: 2

24 Dec 1992

5975-01-370-2452
Electrical Cable Protector

013702452
1348AS107: RNCC: 3 | RNVC: 1
1348AS107: RNCC: 3 | RNVC: 2

16 Jan 1993

5975-01-371-0217
Junction Box

013710217
A24H20ALP: RNCC: 3 | RNVC: 2

5 Feb 1993

5975-01-371-1821
Box Sensor Panel

013711821
8547254-10: RNCC: 3 | RNVC: 2
8547254-10: RNCC: 5 | RNVC: 9

8 Feb 1993

5975-01-359-7297
Junction Box

013597297
173AS1099: RNCC: 3 | RNVC: 2

11 Jun 1992

5975-01-360-5555
Electrical Equipment Mounting Base

013605555
110841: RNCC: 3 | RNVC: 9
525565: RNCC: 7 | RNVC: 2

26 Jun 1992

5975-01-360-7380
Connector Protection Flange

013607380
TH-1C: RNCC: 3 | RNVC: 2
TH-1C: RNCC: 3 | RNVC: 9
TH-1C: RNCC: 5 | RNVC: 2
TH-1C: RNCC: 5 | RNVC: 9
TH-1C: RNCC: 5 | RNVC: 9
TH-1C: RNCC: 5 | RNVC: 9
5975PL1285658: RNCC: 6 | RNVC: 9

30 Jun 1992

5975-01-378-1011
Flexible Metal Conduit Assembly

013781011
57350-09FTOIN: RNCC: 3 | RNVC: 2
POD-57350-09: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-381-6930
Electrical Conduit Bend

013816930
MBEU140904: RNCC: 3 | RNVC: 2
MBEU140904: RNCC: 5 | RNVC: 2

21 Oct 1993

5975-01-381-2512
Electrical Cable Nipple

013812512
202S121-25S: RNCC: 3 | RNVC: 2

12 Oct 1993

5975-01-382-7688
Electrical Equipment Foot

013827688
868786: RNCC: 3 | RNVC: 2

9 Nov 1993

5975-01-383-4480
Conduit Outlet

013834480
75452-5-A: RNCC: 3 | RNVC: 2
75452-5-A: RNCC: 5 | RNVC: 9

24 Nov 1993

5975-01-384-7912
Electrical-Electronic Equipment Chassis

013847912
70450-81110-047: RNCC: 3 | RNVC: 2

23 Dec 1993

5975-01-332-7833
Electrical Components Tie Down Strap

013327833
FDC-1730-210-2: RNCC: 3 | RNVC: 2
867153-3: RNCC: 5 | RNVC: 9
867153-3: RNCC: 7 | RNVC: 2

16 Jan 1991

5975-01-338-9190
Electrical Components Tie Down Strap

013389190
23-09796-309: RNCC: 3 | RNVC: 2
08-402: RNCC: 3 | RNVC: 2

12 May 1991

5975-01-387-5648
Round Transit Frame

013875648
RS 001 0075 1023: RNCC: 3 | RNVC: 2
RS00100751023: RNCC: 5 | RNVC: 2
RS-76: RNCC: 5 | RNVC: 9
MIL-P-24705: RNCC: 5 | RNVC: 9
RS-75: RNCC: 5 | RNVC: 9
RS-76: RNCC: 5 | RNVC: 9

8 Mar 1994

5975-01-343-1293
Flexible Nonmetallic Conduit

013431293
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1108: RNCC: 3 | RNVC: 2
M81914/4-1108: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-343-2234
Cable Tray

013432234
G382654-1: RNCC: 3 | RNVC: 2
G382654-1: RNCC: 5 | RNVC: 2
G382654-1: RNCC: 5 | RNVC: 9

8 Aug 1991

5975-01-391-7127
Electrical Nonmetallic Conduit Assembly

013917127
57350-23FT0IN: RNCC: 3 | RNVC: 2
57350-23: RNCC: 5 | RNVC: 9

16 Jun 1994

5975-01-397-5165
Electrical Components Tie Down Strap

013975165
SSC2S-S6-C: RNCC: 3 | RNVC: 2

13 Oct 1994

5975-01-399-0620
Electrical Box Connector

013990620
NL90-50L: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-01-407-5579
Switch Terminal Cover

014075579
9325C08-1584-01: RNCC: 3 | RNVC: 2
5728R: RNCC: 5 | RNVC: 9

31 Jan 1995

5975-01-414-5325
Electrical Conduit Adapter

014145325
3D73433-001: RNCC: 3 | RNVC: 2
1135E39-44: RNCC: 5 | RNVC: 2

8 Jun 1995

5975-01-416-8453
Rigid Metal Conduit

014168453
1339AS782-1: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-01-420-6822
Ground Rod

014206822
K2L-10CS: RNCC: 3 | RNVC: 2

23 Oct 1995

5975-01-420-8392
Switch Terminal Cover

014208392
515866: RNCC: 3 | RNVC: 2
515866: RNCC: 5 | RNVC: 2
515866: RNCC: 5 | RNVC: 2

26 Oct 1995

5975-01-423-4849
Cable Hanger

014234849
149383-1017: RNCC: 3 | RNVC: 2
149383-1017: RNCC: 5 | RNVC: 9

28 Dec 1995

5975-01-439-5497
Electrical-Electronic Equipment Panel

014395497
RT-522: RNCC: 3 | RNVC: 2

11 Dec 1996

5975-01-432-0960
Insulator Pin

014320960
741252-A00: RNCC: 3 | RNVC: 2
741252-A: RNCC: 5 | RNVC: 9
8-29-4/9: RNCC: 5 | RNVC: 9

24 May 1996

5975-01-432-4123
Electrical Conduit Adapter

014324123
4801-1: RNCC: 3 | RNVC: 2
11B254124-1: RNCC: 3 | RNVC: 2

5 Jun 1996

5975-01-441-7936
Electrical Equipment Mounting Base

014417936
344A4584G2: RNCC: 3 | RNVC: 2
344A4584G2: RNCC: 5 | RNVC: 2

24 Feb 1997

5975-01-442-6919
Electrical Nonmetallic Conduit Assembly

014426919
R58HB18D45W084A: RNCC: 3 | RNVC: 2
R58HB18D45W084A: RNCC: 3 | RNVC: 2
R58HB18D45W084A: RNCC: 3 | RNVC: 2
R58HB18D45W084A: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

20 Mar 1997

5975-01-436-1002
Junction Box

014361002
232: RNCC: 3 | RNVC: 2
11B254106: RNCC: 3 | RNVC: 2

11 Sep 1996

5975-01-436-2333
Electrical Conduit Coupling

014362333
1.500 TRADE SIZE: RNCC: 3 | RNVC: 2
1.500 TRADE SIZE: RNCC: 5 | RNVC: 9

14 Sep 1996

5975-01-450-3691
Rigid Metal Conduit

014503691
16W194-9: RNCC: 3 | RNVC: 9
16W194-9: RNCC: 5 | RNVC: 9

5 Nov 1997

5975-01-451-2088
Rigid Metal Conduit Assembly

014512088
68A250649-2065: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-7905
Electrical Components Tie Down Strap

014517905
9D0254-1-1-9: RNCC: 3 | RNVC: 2
SST2S-9: RNCC: 3 | RNVC: 9
T50R-9: RNCC: 5 | RNVC: 9
PLT2S-9: RNCC: 5 | RNVC: 9

5 Jan 1998

5975-01-454-1308
Guide Rail

014541308
A3251000: RNCC: 3 | RNVC: 2

20 Mar 1998

5975-01-456-2647
Flexible Metal Conduit Assembly

014562647
227693-DL0000: RNCC: 3 | RNVC: 2

8 Jun 1998

5975-01-457-7941
Rigid Metal Conduit Assembly

014577941
1534AS460: RNCC: 3 | RNVC: 2
1534AS460: RNCC: 3 | RNVC: 2
1534AS460: RNCC: 3 | RNVC: 2
1534AS460: RNCC: 3 | RNVC: 2
1534AS460: RNCC: 3 | RNVC: 2
1534AS460: RNCC: 7 | RNVC: 2

4 Aug 1998

5975-01-461-4363
Flexible Metal Conduit Assembly

014614363
227712-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-6176
Junction Box

014616176
LT-001: RNCC: 3 | RNVC: 2

21 Dec 1998

5975-01-461-6159
Flexible Nonmetallic Conduit

014616159
S2112: RNCC: 3 | RNVC: 2

21 Dec 1998

5975-01-460-8991
Cable Hanger

014608991
5325-SS-G6: RNCC: 3 | RNVC: 2
3225T23: RNCC: 5 | RNVC: 2

19 Nov 1998

5975-01-461-7613
Stuffing Tube

014617613
M24235/15-012: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-462-1809
Stuffing Tube

014621809
M24235/14-132: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
RO0110: RNCC: 5 | RNVC: 9

25 Jan 1999

5975-01-461-7582
Stuffing Tube

014617582
M24235/15-007: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-462-1826
Stuffing Tube

014621826
M24235/14-135: RNCC: 2 | RNVC: 1
MIL-S-24235: RNCC: 4 | RNVC: 1

25 Jan 1999

5975-01-462-6803
Electrical-Electronic Equipment Panel

014626803
12976799: RNCC: 1 | RNVC: 2
12976799: RNCC: 3 | RNVC: 2

12 Feb 1999

5975-01-462-7328
Stuffing Tube

014627328
1990.3 SIZE C TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269-143: RNCC: 5 | RNVC: 1
320-6903490-AY-19-27: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: D | RNVC: 9

16 Feb 1999

5975-01-462-7231
Stuffing Tube

014627231
1945.15 SIZE S TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-125: RNCC: 5 | RNVC: 2
1945.15 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-328-8119
Cable Channel

013288119
7241542-00: RNCC: 3 | RNVC: 2

7 Nov 1990

5975-01-386-0420
Electrical Nonmetallic Conduit Assembly

013860420
R58HB18F50A008: RNCC: 3 | RNVC: 2
R58HB18F50A008: RNCC: 5 | RNVC: 9

26 Jan 1994

5975-01-387-5027
Flexible Metal Conduit Assembly

013875027
57350-19FT0IN: RNCC: 3 | RNVC: 2
57350-19: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-341-1923
Cable Strain Relief Bushing

013411923
1374: RNCC: 3 | RNVC: 2
1374: RNCC: 3 | RNVC: 9

25 Jun 1991

5975-01-437-3107
Electrical Equipment Mounting Base

014373107
622-9465-001: RNCC: 3 | RNVC: 2
T439F40T0002: RNCC: 5 | RNVC: 2
622-9465-001: RNCC: 5 | RNVC: 2
757592995900: RNCC: 5 | RNVC: 9
LE473-0005-0002: RNCC: 7 | RNVC: 2

10 Oct 1996

5975-01-440-5561
Electrical-Electronic Equipment Chassis

014405561
DE100I-RS: RNCC: 3 | RNVC: 9
MIL-9100X: RNCC: 5 | RNVC: 9
7085540: RNCC: 5 | RNVC: 9

16 Jan 1997

5975-01-432-5728
Electrical Tie Down Mounting Base

014325728
RC8039B-9.00: RNCC: 3 | RNVC: 2

10 Jun 1996

5975-01-434-1756
Electrical Nonmetallic Conduit Assembly

014341756
R58HB16K18Y084F: RNCC: 3 | RNVC: 9
R58HB16K18Y084F: RNCC: 5 | RNVC: 9
R58HB16K18Y084F: RNCC: 5 | RNVC: 9
R58HB16K18Y084F: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-444-5969
Electrical Components Tie Down Strap

014445969
2FH18: RNCC: 3 | RNVC: 2
2257-N-40: RNCC: 5 | RNVC: 2
2FH18: RNCC: 5 | RNVC: 9
2257-N-40: RNCC: 5 | RNVC: 9
2257-N-40: RNCC: C | RNVC: 1

12 May 1997

5975-01-445-6169
Electrical Equipment Mounting Base

014456169
200-3202-00: RNCC: 3 | RNVC: 2
822-0791-001: RNCC: 5 | RNVC: 2

6 Jun 1997

5975-01-286-3065
Electrical Box Connector

012863065
000301022296: RNCC: 3 | RNVC: 2
9-333-101425: RNCC: 5 | RNVC: 2

30 Sep 1988

5975-01-285-9662
Electrical Tie Down Mounting Base

012859662
MTP1S-E10: RNCC: 3 | RNVC: 2
10273506-1: RNCC: 7 | RNVC: 2

23 Sep 1988

5975-01-286-7407
Blank Panel

012867407
717512815-001: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-288-0716
Cable Terminal Chamber

012880716
1287024-1: RNCC: 3 | RNVC: 9
1287024-1: RNCC: C | RNVC: 1

2 Nov 1988

5975-01-288-0717
Cable Terminal Chamber

012880717
1287010-1: RNCC: 3 | RNVC: 9
1287010-1: RNCC: C | RNVC: 1

2 Nov 1988

5975-01-290-3524
Cable Marker Sleeve

012903524
SS7094-S5-175-9: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-295-5300
Power Cord Clamp

012955300
343-1213-00: RNCC: 3 | RNVC: 2

8 Mar 1989

5975-01-295-8211
Electrical Box Connector

012958211
SHC-1052-ZP: RNCC: 3 | RNVC: 2
64-2249: RNCC: 5 | RNVC: 2

24 Aug 2010

5975-01-296-6057
Fanning Strip

012966057
7517533-06: RNCC: 3 | RNVC: 9
7517533-06: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6068
Fanning Strip

012966068
7517533-17: RNCC: 3 | RNVC: 9
7517533-17: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7908
Fanning Strip

012967908
7517533-27: RNCC: 3 | RNVC: 9
7517533-27: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-298-4651
Flexible Conduit Assembly

012984651
5188105-9: RNCC: 1 | RNVC: 2
759-192-14: RNCC: 3 | RNVC: 2
206009-DI0270: RNCC: 3 | RNVC: 2

17 Apr 1989

5975-01-302-5561
Shield Panel

013025561
7170504-00: RNCC: 3 | RNVC: 2

16 Jun 1989

5975-01-302-2355
Electrical-Electronic Equipment Chassis

013022355
465-000-220: RNCC: 3 | RNVC: 2

10 Jun 1989

5975-01-302-8286
Flexible Metal Conduit Assembly

013028286
750-011NF20-69: RNCC: 3 | RNVC: 2
200186-DI0690: RNCC: 3 | RNVC: 2
10250675-70: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-302-8287
Flexible Metal Conduit Assembly

013028287
750-011NF08-111: RNCC: 3 | RNVC: 1
200204-DI1110: RNCC: 3 | RNVC: 1
10250675-35: RNCC: 3 | RNVC: 2

21 Jun 1989

5975-01-302-7586
Electrical Equipment Cabinet Case

013027586
150-030554-002: RNCC: 3 | RNVC: 2
150-030554-001: RNCC: 5 | RNVC: 9

19 Jun 1989

5975-01-302-8292
Flexible Metal Conduit Assembly

013028292
750-011NF16-55: RNCC: 3 | RNVC: 2
200206-DI0550: RNCC: 5 | RNVC: 2
10250675-63: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-304-1712
Cable Hanger

013041712
101-107-447: RNCC: 3 | RNVC: 2
101-107-123: RNCC: 5 | RNVC: 9

13 Jul 1989

5975-01-305-0832
Blank Panel

013050832
633449-002: RNCC: 3 | RNVC: 9

1 Aug 1989

5975-01-306-8195
Electrical Equipment Mounting Base

013068195
675-70546-501: RNCC: 3 | RNVC: 9
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2
675-70546-501: RNCC: 5 | RNVC: 2

30 Aug 1989

5975-01-307-3989
Conduit Outlet

013073989
LR17: RNCC: 3 | RNVC: 2
OLR-1: RNCC: 5 | RNVC: 2
LR50-M: RNCC: C | RNVC: 1
LR17 FORM 7: RNCC: C | RNVC: 1

10 Sep 1989

5975-01-308-2445
Box Assembly

013082445
104024-0: RNCC: 3 | RNVC: 2

27 Sep 1989

5975-01-308-5600
Electrical Box Connector

013085600
TW-75CSI: RNCC: 3 | RNVC: 2
MW651S: RNCC: 3 | RNVC: 2
7075ST: RNCC: 5 | RNVC: 9

30 Sep 1989

5975-01-310-0568
Cable Nipple Cover

013100568
260322-2: RNCC: 3 | RNVC: 2
260322-2: RNCC: C | RNVC: 1

29 Oct 1989

5975-01-312-6400
Electrical Equipment Mounting Base

013126400
467-46810-1: RNCC: 3 | RNVC: 2

21 Dec 1989

5975-01-311-9910
Electrical Conduit Adapter

013119910
50648-16A: RNCC: 1 | RNVC: 2
710-051NF16A: RNCC: 3 | RNVC: 2

7 Dec 1989

5975-01-318-0637
Electrical Components Tie Down Strap

013180637
5002335-3: RNCC: 3 | RNVC: 2
5002335-3: RNCC: 5 | RNVC: 9

11 Apr 1990

5975-01-321-5685
Electrical Nonmetallic Conduit Assembly

013215685
R58HA04B33A005: RNCC: 3 | RNVC: 2
R58HA04B33A005: RNCC: 5 | RNVC: 9

20 Jun 1990

5975-01-322-6360
Electrical Conduit Wye

013226360
Y-1: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-322-6365
Conduit Outlet

013226365
FST-1-50: RNCC: 3 | RNVC: 9
158AS140-4: RNCC: 5 | RNVC: 2
FST-1-50: RNCC: C | RNVC: 1

11 Jul 1990

5975-01-324-0308
Fanning Strip

013240308
7241541-10: RNCC: 3 | RNVC: 2

8 Aug 1990

5975-01-344-3765
Electrical Tie Down Mounting Base

013443765
TM1S4-C: RNCC: 3 | RNVC: 2
900698-1: RNCC: 5 | RNVC: 9
10134306: RNCC: 6 | RNVC: 9
10139252-101: RNCC: 7 | RNVC: 2
900698-1: RNCC: C | RNVC: 1

27 Aug 1991

5975-01-344-4698
Electrical Tie Down Mounting Base

013444698
FTH-5A-RT -C: RNCC: 3 | RNVC: 2
FTH-5A-RT: RNCC: 5 | RNVC: 9
907970-002: RNCC: 5 | RNVC: 9
FTH-5A: RNCC: 5 | RNVC: 9

29 Aug 1991

5975-01-345-6714
Electrical Equipment Mounting Base

013456714
70600-81011-045: RNCC: 3 | RNVC: 2

23 Sep 1991

5975-01-348-8687
Electrical Components Tie Down Strap

013488687
7130K54: RNCC: 3 | RNVC: 2
7130K54: RNCC: 5 | RNVC: 9
60890: RNCC: C | RNVC: 1

18 Nov 1991

5975-01-360-9703
Electrical Components Tie Down Strap

013609703
PLT1M-MP: RNCC: 3 | RNVC: 2
T853000010: RNCC: C | RNVC: 1

7 Jul 1992

5975-01-361-6274
Electrical Box Connector

013616274
650-DC2: RNCC: 3 | RNVC: 9
650-DC2: RNCC: 5 | RNVC: 9

23 Jul 1992

5975-01-364-2051
Junction Box

013642051
6-176-000614: RNCC: 3 | RNVC: 2
2HG332: RNCC: 5 | RNVC: 2
2HG332: RNCC: 5 | RNVC: 9

14 Sep 1992

5975-01-364-5613
Electrical Box Connector

013645613
3234: RNCC: 3 | RNVC: 2

22 Sep 1992

5975-01-367-0822
Electrical-Electronic Equipment Panel

013670822
74A731171-1001: RNCC: 3 | RNVC: 2
10134311: RNCC: 6 | RNVC: 9

6 Nov 1992

5975-01-367-9502
Seat Bucket Cleat

013679502
MBEU145434: RNCC: 3 | RNVC: 2
MBEU145434: RNCC: 5 | RNVC: 2

21 Nov 1992

5975-01-370-5068
Electrical Box Connector

013705068
2922AL: RNCC: 3 | RNVC: 2

23 Jan 1993

5975-01-370-7832
Electrical Equipment Rack

013707832
12918282: RNCC: 3 | RNVC: 2
12918282: RNCC: 5 | RNVC: 2
12918282: RNCC: D | RNVC: 9

30 Jan 1993

5975-01-372-6685
Electrical Tie Down Mounting Base

013726685
22970-14313: RNCC: 1 | RNVC: 2
ABM2S-AT-C: RNCC: 3 | RNVC: 2
14313: RNCC: 5 | RNVC: 2
076-006367-002: RNCC: 5 | RNVC: 2

16 Mar 1993

5975-01-375-2392
Electrical Box Connector

013752392
AA50553-12L201S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
6-1-6200-30: RNCC: 5 | RNVC: 9

7 May 1993

5975-01-375-8006
Electrical Conductor Bushing

013758006
741263A00: RNCC: 3 | RNVC: 2

21 May 1993

5975-01-386-6509
Cable Insert Block

013866509
RM90: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
RM90: RNCC: 5 | RNVC: 9

10 Feb 1994

5975-01-387-6288
Filler Insert

013876288
RM 40/0: RNCC: 3 | RNVC: 2
RM 40/0: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-326-4659
Electrical Box Connector

013264659
LS965-8: RNCC: 3 | RNVC: 2
LS965-8: RNCC: 5 | RNVC: 2
LS965-8: RNCC: 5 | RNVC: 9

25 Sep 1990

5975-01-327-3949
Cable Channel

013273949
7241541-11: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-327-3092
Cable Marker Sleeve Set

013273092
719127-A: RNCC: 3 | RNVC: 2

11 Oct 1990

5975-01-327-3950
Cable Channel

013273950
7241541-12: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-328-0269
Junction Box

013280269
E989NNJ: RNCC: 3 | RNVC: 9
E989NNJ: RNCC: 5 | RNVC: 2
00034881066817: RNCC: 5 | RNVC: 9

26 Oct 1990

5975-01-328-0588
Junction Box

013280588
4789287-0001A: RNCC: 3 | RNVC: 2
405-4685123 ITEM 30: RNCC: 5 | RNVC: 2
4789287-0001: RNCC: 5 | RNVC: 9

26 Oct 1990

5975-01-329-1116
Electrical Conduit Elbow

013291116
4244: RNCC: 3 | RNVC: 2

11 Nov 1990

5975-01-332-2101
Wire Mesh Grip

013322101
RPE421-119: RNCC: 3 | RNVC: 2

7 Jan 1991

5975-01-332-4749
Strain Electrical Conductor Clamp

013324749
TC828: RNCC: 3 | RNVC: 2
CTAM-1: RNCC: 3 | RNVC: 2
Z22-0002: RNCC: 7 | RNVC: 2
Z22-0002-003: RNCC: C | RNVC: 1

11 Jan 1991

5975-01-333-9262
Strain Relief Clamp

013339262
37315-1: RNCC: 3 | RNVC: 2

12 Feb 1991

5975-01-338-3564
Electrical Equipment Mounting Base

013383564
16F2261-165: RNCC: 3 | RNVC: 2

3 May 1991

5975-01-339-9789
Insulator Bracket Strap

013399789
5167448: RNCC: 3 | RNVC: 2

5 Jun 1991

5975-01-343-1310
Electronic Junction Rack

013431310
DCR-1A-02: RNCC: 3 | RNVC: 2
4081-56030-162: RNCC: 5 | RNVC: 9
4081-56030-162: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-397-4781
Electrical Conduit Adapter

013974781
S1816C2204-8: RNCC: 3 | RNVC: 2
2613235: RNCC: 7 | RNVC: 2

12 Oct 1994

5975-01-398-1918
Flexible Nonmetallic Conduit

013981918
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1008: RNCC: 3 | RNVC: 2
M81914/1-1008: RNCC: 5 | RNVC: 9
MIL-T-81914/1: RNCC: 5 | RNVC: 9
SAE-AS81914/4: RNCC: 5 | RNVC: 9
M81914/1-1008: RNCC: 5 | RNVC: 9
AMS-T-81914/1: RNCC: 5 | RNVC: 9
AMS-T-81914/1: RNCC: 5 | RNVC: 9
AS81914/1: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-406-9967
Junction Box

014069967
1339AS849-1: RNCC: 3 | RNVC: 2

18 Jan 1995

5975-01-407-5604
Blank Panel

014075604
MS14129-37: RNCC: 2 | RNVC: 2

31 Jan 1995

5975-01-411-3334
Stuffing Tube

014113334
G63324-2: RNCC: 3 | RNVC: 2

22 Mar 1995

5975-01-414-9766
Electrical Cable Nipple

014149766
5728-005B: RNCC: 3 | RNVC: 2
666141: RNCC: 5 | RNVC: 9
5728-005B: RNCC: 5 | RNVC: 9

16 Jun 1995

5975-01-418-5108
Electrical Conduit Locknut

014185108
9C00015-15: RNCC: 3 | RNVC: 2

29 Aug 1995

5975-01-426-2662
Electronic Equipment Mounting Tray

014262662
3141AS466-1: RNCC: 3 | RNVC: 2
3141AS466-1: RNCC: 5 | RNVC: 2
3141AS466-1: RNCC: 5 | RNVC: 9

7 Mar 1996

5975-01-434-6887
Flexible Metal Conduit

014346887
375145-1: RNCC: 3 | RNVC: 2

5 Aug 1996

5975-01-436-1001
Flexible Metal Conduit

014361001
0175-03-HE-0500: RNCC: 3 | RNVC: 2
1741AS703-1: RNCC: 7 | RNVC: 2
1741AS703-6: RNCC: C | RNVC: 1

11 Sep 1996

5975-01-436-1005
Flexible Metal Conduit

014361005
0175-03-HE-2000: RNCC: 3 | RNVC: 2
1741AS703-4: RNCC: 7 | RNVC: 2
1741AS703-15: RNCC: C | RNVC: 1

11 Sep 1996

5975-01-436-3620
Electrical Conduit Ferrule

014363620
185508-FB5100: RNCC: 3 | RNVC: 2
1741AS738-1: RNCC: 7 | RNVC: 2

17 Sep 1996

5975-01-440-4543
Electrical Conduit Nipple

014404543
1741AS731-2: RNCC: 3 | RNVC: 2
0.750 TRADE SIZE: RNCC: 5 | RNVC: 9
1741AS731: RNCC: D | RNVC: 9

14 Jan 1997

5975-01-444-4218
Electrical Equipment Mounting Base

014444218
12974010: RNCC: 3 | RNVC: 2

6 May 1997

5975-01-446-5448
Electrical Equipment Mounting Base

014465448
071-04054-0000: RNCC: 3 | RNVC: 2

9 Jul 1997

5975-01-449-5082
Blank Panel

014495082
490021: RNCC: 3 | RNVC: 9
490021: RNCC: 5 | RNVC: 2

3 Oct 1997

5975-01-451-2143
Rigid Metal Conduit Assembly

014512143
68A250649-2066: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2160
Rigid Metal Conduit Assembly

014512160
68A250649-2068: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-3709
Cable Hanger

014513709
101-107-318: RNCC: 3 | RNVC: 2

15 Dec 1997

5975-01-451-3722
Cable Hanger

014513722
101-107-459: RNCC: 3 | RNVC: 2

15 Dec 1997

5975-01-451-6546
Ground Rod Section

014516546
H96-0001-003: RNCC: 3 | RNVC: 2

23 Dec 1997

5975-01-454-8563
Electrical Cable Protector

014548563
SM-D-801318: RNCC: 3 | RNVC: 2

15 Apr 1998

5975-01-455-5882
Electronic Equipment Mounting Tray

014555882
697940-5: RNCC: 3 | RNVC: 2
1500-1590-001: RNCC: 3 | RNVC: 2

7 May 1998

5975-01-461-1433
Flexible Nonmetallic Conduit

014611433
366A-15: RNCC: 3 | RNVC: 2
A366A-15: RNCC: 3 | RNVC: 2
R-68237: RNCC: 3 | RNVC: 2
R0068237: RNCC: 5 | RNVC: 2
12339351-1: RNCC: 7 | RNVC: 2
A366A-2: RNCC: D | RNVC: 9

1 Dec 1998

5975-01-462-7225
Stuffing Tube

014627225
1945.10 SIZE L TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-120: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1945.10 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-422-7729
Electrical Tie Down Mounting Base

014227729
CB3019AA3N750: RNCC: 3 | RNVC: 2
18-01010-01: RNCC: C | RNVC: 1

7 Dec 1995

5975-01-420-6588
Electrical-Electronic Equipment Chassis

014206588
5548487: RNCC: 3 | RNVC: 2

21 Oct 1995

5975-01-436-1003
Flexible Metal Conduit

014361003
0175-03-HE-0750: RNCC: 3 | RNVC: 2
1741AS703-2: RNCC: 7 | RNVC: 2
1741AS703-12: RNCC: C | RNVC: 1

11 Sep 1996

5975-01-326-6507
Cable Shield Adapter

013266507
GA/CSGA-K/NPT: RNCC: 3 | RNVC: 2
SEEPA-NF-K-A: RNCC: 5 | RNVC: 2
CSGA-K/NPT: RNCC: 5 | RNVC: 2
CSGA-K/NPT: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-438-6383
Flexible Metal Conduit

014386383
M24758-E: RNCC: 2 | RNVC: 2
MIL-PRF-24758: RNCC: 4 | RNVC: 1
MIL-C-24758/1: RNCC: 5 | RNVC: 9
M24758/1-10: RNCC: 5 | RNVC: 9

14 Nov 1996

5975-01-442-1527
Flexible Metal Conduit

014421527
E22801G-0A0002: RNCC: 3 | RNVC: 2

6 Mar 1997

5975-01-444-2006
Cable Hanger

014442006
320-4-50646-103: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-458-5937
Mounting Strap Assy

014585937
704AS4033: RNCC: 3 | RNVC: 1
704AS4033: RNCC: 3 | RNVC: 2

1 Sep 1998

5975-01-461-4452
Flexible Metal Conduit Assembly

014614452
200AS349-040JH10041DA132: RNCC: 3 | RNVC: 2

14 Dec 1998

5975-01-461-7574
Stuffing Tube

014617574
M24235/15-004: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-283-8699
Electrical Box Connector

012838699
SHC-1024: RNCC: 3 | RNVC: 2

14 Aug 1988

5975-01-285-0580
Electrical Conductor Bushing

012850580
407-43613-1: RNCC: 3 | RNVC: 2

5 Sep 1988

5975-01-287-9941
Metallic Raceway

012879941
F44L24: RNCC: 3 | RNVC: 2
1485C24: RNCC: 5 | RNVC: 9
1485C24: RNCC: C | RNVC: 1

30 Oct 1988

5975-01-288-3099
Cable Hanger

012883099
1716084 ASSY 7, TY 8: RNCC: 3 | RNVC: 1

4 Nov 1988

5975-01-289-2744
Electrical Conduit Adapter

012892744
150312: RNCC: 3 | RNVC: 2
1004-121205: RNCC: 5 | RNVC: 9

20 Nov 1988

5975-01-289-4783
Conduit Bushed Nipple

012894783
CN-50I: RNCC: 3 | RNVC: 2
2D62155PK-001: RNCC: 5 | RNVC: 1
D-270: RNCC: 5 | RNVC: 9
501-A: RNCC: 5 | RNVC: 9
1102-DCI: RNCC: 5 | RNVC: 9
CN-50I: RNCC: 5 | RNVC: 9
3602: RNCC: 5 | RNVC: 9
3662: RNCC: 5 | RNVC: 9
425-104: RNCC: 5 | RNVC: 9

23 Nov 1988

5975-01-292-6275
Electrical Equipment Drawer

012926275
11455783-2: RNCC: 3 | RNVC: 1
11455783-2: RNCC: 3 | RNVC: 2

20 Jan 1989

5975-01-294-2134
Cable Hanger

012942134
101-107-431: RNCC: 3 | RNVC: 2
101-107-431: RNCC: 5 | RNVC: 2
101-107-431: RNCC: 5 | RNVC: 9
101-107-431: RNCC: 5 | RNVC: 9

13 Feb 1989

5975-01-292-7626
Interconnecting Box Cover

012927626
1224151-10: RNCC: 3 | RNVC: 9
1224151-10: RNCC: C | RNVC: 1

21 Jan 1989

5975-01-295-9058
Electrical Cable Protector

012959058
016-003144-001: RNCC: 1 | RNVC: 2
178-0085: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-297-4954
Electrical Nonmetallic Conduit Assembly

012974954
R58HB06B32W048: RNCC: 3 | RNVC: 2
R58HB06B32W048: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

4 Apr 1989

5975-01-297-6129
Electrical Conduit Adapter

012976129
100235-0032: RNCC: 3 | RNVC: 2
G63164-32: RNCC: 3 | RNVC: 2
100213-FB6200: RNCC: 3 | RNVC: 2
10250710-32: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-297-6132
Electrical Conduit Adapter

012976132
100235-0030: RNCC: 3 | RNVC: 2
G63164-30: RNCC: 5 | RNVC: 2
CH09-0340-430: RNCC: 5 | RNVC: 2
100211-FB6200: RNCC: 5 | RNVC: 2
10250710-30: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-297-6137
Electrical Cable Nipple

012976137
260322-1: RNCC: 3 | RNVC: 2
260322-1: RNCC: 5 | RNVC: 9

4 Apr 1989

5975-01-299-1507
Wire Conduit

012991507
735693: RNCC: 3 | RNVC: 2
10159134: RNCC: 6 | RNVC: 9

26 Apr 1989

5975-01-300-6423
Junction Box

013006423
A6044NFSS: RNCC: 3 | RNVC: 2
AB664JFCX: RNCC: 3 | RNVC: 2

17 May 1989

5975-01-302-9631
Electrical Conduit Adapter

013029631
G63162-2: RNCC: 3 | RNVC: 1
186704-FB6200: RNCC: 3 | RNVC: 1
10250676-2: RNCC: 3 | RNVC: 2
CH09-0340-202: RNCC: 5 | RNVC: 9

22 Jun 1989

5975-01-305-0854
Junction Box

013050854
574B: RNCC: 3 | RNVC: 2
574: RNCC: 5 | RNVC: 9

1 Aug 1989

5975-01-307-2526
Conduit Flexible

013072526
600232-5: RNCC: 3 | RNVC: 2
FF16929PC20: RNCC: 5 | RNVC: 2

8 Sep 1989

5975-01-308-1974
Electrical-Electronic Equipment Panel

013081974
106C5006-1C: RNCC: 3 | RNVC: 2

23 Sep 1989

5975-01-309-1793
Electrical Cable Protector

013091793
12349696: RNCC: 3 | RNVC: 2

12 Oct 1989

5975-01-308-8391
Electronic Junction Rack

013088391
CTJ-3D-03-4021: RNCC: 3 | RNVC: 2
ARMS-HN03: RNCC: 3 | RNVC: 2
SJT503301: RNCC: 3 | RNVC: 2
HS4778-103: RNCC: 5 | RNVC: 9
HS4778-103: RNCC: C | RNVC: 1

5 Oct 1989

5975-01-313-1101
Electrical Components Tie Down Strap

013131101
PLT4I: RNCC: 3 | RNVC: 2
PLT4I: RNCC: 5 | RNVC: 9
ES8616-03C: RNCC: 5 | RNVC: 9

31 Dec 1989

5975-01-313-6943
Electrical Tie Down Mounting Base

013136943
TMEH-S8-Q0: RNCC: 3 | RNVC: 2

14 Jan 1990

5975-01-314-8470
Electrical Components Tie Down Strap

013148470
BT-6-01-NT: RNCC: 3 | RNVC: 9
BT-6N: RNCC: 5 | RNVC: 2
EZ3: RNCC: 5 | RNVC: 9

7 Feb 1990

5975-01-319-0926
Electrical Cable Protector

013190926
12910379: RNCC: 3 | RNVC: 2

1 May 1990

5975-01-319-8124
Blank Panel

013198124
12345349: RNCC: 3 | RNVC: 2

15 May 1990

5975-01-320-1342
Flexible Metal Conduit

013201342
10-90657-111: RNCC: 3 | RNVC: 2

19 May 1990

5975-01-321-7294
Junction Box

013217294
A8R64: RNCC: 3 | RNVC: 2
RSC684: RNCC: 5 | RNVC: 9
T204850: RNCC: 7 | RNVC: 2

23 Jun 1990

5975-01-322-6434
Electrical Conduit Locknut

013226434
141SL: RNCC: 3 | RNVC: 2
1202: RNCC: 5 | RNVC: 2
SLG-50S: RNCC: 5 | RNVC: 9
T204875: RNCC: 7 | RNVC: 2

11 Jul 1990

5975-01-346-8339
Cable Hanger

013468339
S4419023524: RNCC: 3 | RNVC: 2
S4419023524: RNCC: 5 | RNVC: 2
884 830 454 4: RNCC: 5 | RNVC: 9

10 Oct 1991

5975-01-348-4728
Electrical Conduit Adapter

013484728
9365707-2: RNCC: 3 | RNVC: 2

10 Nov 1991

5975-01-349-1798
Rigid Metal Conduit

013491798
184235-002: RNCC: 3 | RNVC: 2
184235-002: RNCC: 5 | RNVC: 9
184235-002: RNCC: 5 | RNVC: 9

22 Nov 1991

5975-01-351-1157
Electrical Equipment Cabinet Case

013511157
CU-341: RNCC: 3 | RNVC: 2

31 Dec 1991

5975-01-352-9336
Electrical Box Connector

013529336
523159-1: RNCC: 3 | RNVC: 2

3 Feb 1992

5975-01-353-5708
Electrical Box Connector

013535708
H05091: RNCC: 3 | RNVC: 2
H05091: RNCC: 5 | RNVC: 9

13 Feb 1992

5975-01-355-3150
Fanning Strip

013553150
3332878-1: RNCC: 3 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2

14 Mar 1992

5975-01-360-7386
Connector Protection Flange

013607386
TH-7B: RNCC: 3 | RNVC: 2
TH-7B: RNCC: 3 | RNVC: 9
80610748099: RNCC: 5 | RNVC: 9
TH-7B: RNCC: 5 | RNVC: 9
7100164425: RNCC: 5 | RNVC: 9

30 Jun 1992

5975-01-361-8058
Electrical Components Tie Down Strap

013618058
PLT2S-M100: RNCC: 3 | RNVC: 2

25 Jul 1992

5975-01-362-7144
Electrical Conductor Bushing

013627144
2166: RNCC: 3 | RNVC: 2

14 Aug 1992

5975-01-362-5206
Flexible Nonmetallic Conduit

013625206
EFC050: RNCC: 3 | RNVC: 2
94-1332030-1: RNCC: 5 | RNVC: 2
EFC050: RNCC: 5 | RNVC: 9
94-1332030-1: RNCC: 5 | RNVC: 9

8 Aug 1992

5975-01-364-5681
Electrical Equipment Mounting Base

013645681
622-8150-001: RNCC: 3 | RNVC: 2
MT-6711/ARN-153(V): RNCC: 5 | RNVC: 9

22 Sep 1992

5975-01-370-1223
Junction Box

013701223
130360: RNCC: 3 | RNVC: 2
210002051: RNCC: 5 | RNVC: 1

14 Jan 1993

5975-01-373-0514
Cable Hanger

013730514
M23190/1-1: RNCC: 2 | RNVC: 2
AS23190: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9

26 Mar 1993

5975-01-375-6042
Electrical Cable Protector

013756042
12937485: RNCC: 3 | RNVC: 2

15 May 1993

5975-01-378-0889
Flexible Metal Conduit Assembly

013780889
57350-7FT0IN: RNCC: 3 | RNVC: 2
POD-57350-07: RNCC: 5 | RNVC: 2
57350-7: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-7721
Electrical Components Tie Down Strap

013787721
PRT6EH-QO: RNCC: 3 | RNVC: 2
RT250MXZ: RNCC: 5 | RNVC: 9

21 Aug 1993

5975-01-383-8991
Electrical Nonmetallic Conduit Assembly

013838991
1328AS620-1: RNCC: 3 | RNVC: 2

6 Dec 1993

5975-01-386-0814
Stuffing Tube

013860814
41008368: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-01-387-4991
Flexible Metal Conduit Assembly

013874991
57350-47FT0IN: RNCC: 3 | RNVC: 2
57350-47: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-5032
Flexible Metal Conduit Assembly

013875032
57350-12FT 0IN: RNCC: 3 | RNVC: 2
57350-12: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-5090
Flexible Metal Conduit Assembly

013875090
57350-34FT0IN: RNCC: 3 | RNVC: 2
57350-34: RNCC: 5 | RNVC: 2

5 Mar 1994

5975-01-387-6279
Filler Insert

013876279
RM 60/0: RNCC: 3 | RNVC: 2
RM 60/0: RNCC: 5 | RNVC: 9
60/0: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6285
Cable Insert Block

013876285
RM 60: RNCC: 3 | RNVC: 2
RM 60: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6286
Stayplate

013876286
STAYPLATE SS: RNCC: 3 | RNVC: 2
STAYPLATE SS 120: RNCC: 3 | RNVC: 2
STAYPLATE SS: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-327-3296
Electrical Components Tie Down Strap

013273296
AS33681: RNCC: 3 | RNVC: 1
MS3368-4-3D: RNCC: 3 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 9
MS3368-4-3D: RNCC: 5 | RNVC: 9
MS3368-4-3D: RNCC: 5 | RNVC: 9

11 Oct 1990

5975-01-331-5922
Junction Box

013315922
54675: RNCC: 3 | RNVC: 2

21 Dec 1990

5975-01-333-1287
Stuffing Tube

013331287
817-25002S155: RNCC: 3 | RNVC: 2
841529-26: RNCC: 5 | RNVC: 9
841529-26: RNCC: C | RNVC: 1

25 Jan 1991

5975-01-334-9847
Electrical Wall Plate

013349847
CCGV: RNCC: 3 | RNVC: 2
WGF100-CV: RNCC: 5 | RNVC: 9

5 Mar 1991

5975-01-336-0178
Rigid Metal Conduit Assembly

013360178
4194-358: RNCC: 3 | RNVC: 2

19 Mar 1991

5975-01-339-8210
Junction Box Cover

013398210
743530: RNCC: 3 | RNVC: 2

31 May 1991

5975-01-343-1294
Flexible Nonmetallic Conduit

013431294
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1201: RNCC: 3 | RNVC: 2
AMS-T-81914/4: RNCC: 5 | RNVC: 1
AMS-T-81914: RNCC: 5 | RNVC: 1
M81914/4-1201: RNCC: 5 | RNVC: 9
AMS-T-81914: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
M81914/4-1201: RNCC: 5 | RNVC: 9
AMS-T-81914/4: RNCC: 5 | RNVC: 9
10134300: RNCC: 6 | RNVC: 9

6 Aug 1991

5975-01-360-7385
Connector Protection Flange

013607385
TH-6E: RNCC: 3 | RNVC: 2
TH-6E: RNCC: 3 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 2
TH-6E: RNCC: 5 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 9
7287116-005: RNCC: 5 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 9
7287116: RNCC: D | RNVC: 9

30 Jun 1992

5975-01-408-3034
Cable Marker Sleeve

014083034
100906-0007: RNCC: 3 | RNVC: 2

14 Feb 1995

5975-01-407-8852
Electrical Conduit Adapter

014078852
2633762-2: RNCC: 3 | RNVC: 2
S1816F2206-8: RNCC: 5 | RNVC: 2

7 Feb 1995

5975-01-412-8653
Electrical Cable Assembly Protector

014128653
A3050654-1: RNCC: 3 | RNVC: 2

29 Apr 1995

5975-01-413-1471
Electrical Conduit Adapter

014131471
21A30135-1: RNCC: 3 | RNVC: 2
1221371: RNCC: 7 | RNVC: 2

6 May 1995

5975-01-416-0682
Junction Box

014160682
A808CH: RNCC: 3 | RNVC: 2

12 Jul 1995

5975-01-416-3551
Protetion Connector Kit

014163551
HCPS-69: RNCC: 3 | RNVC: 2
HCPS-69: RNCC: 3 | RNVC: 9
HCPS-69: RNCC: 5 | RNVC: 9
HCPS-69: RNCC: 5 | RNVC: 9
6317971-021: RNCC: 7 | RNVC: 2
7100164431: RNCC: C | RNVC: 1
HCPS-69: RNCC: C | RNVC: 1

17 Jul 1995

5975-01-420-0336
Electrical Box Entry Flange

014200336
9253: RNCC: 3 | RNVC: 2

5 Oct 1995

5975-01-422-7556
Electrical Cable Nipple

014227556
5780-000R: RNCC: 3 | RNVC: 9
12421186-002: RNCC: 5 | RNVC: 2
12421186-002: RNCC: 5 | RNVC: 2
12421186-002: RNCC: 5 | RNVC: 2
5737-005R: RNCC: 5 | RNVC: 9
12421186: RNCC: D | RNVC: 9

7 Dec 1995

5975-01-426-1518
Junction Box

014261518
A10106CH: RNCC: 3 | RNVC: 2

5 Mar 1996

5975-01-430-3109
Electrical Equipment Mounting Base

014303109
A3154893: RNCC: 3 | RNVC: 2
A3154893: RNCC: 5 | RNVC: 2
MT-6845/VRC: RNCC: 5 | RNVC: 9

26 Apr 1996

5975-01-430-7131
Electrical Cable Nipple

014307131
1S-2294: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-430-7133
Electrical Conduit Adapter

014307133
5N-9117: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-432-4405
Electrical Equipment Cabinet

014324405
21-10273: RNCC: 3 | RNVC: 2
589-6953092: RNCC: D | RNVC: 9

6 Jun 1996

5975-01-432-5752
Electrical Equipment Mounting Base

014325752
050350110117: RNCC: 3 | RNVC: 2

10 Jun 1996

5975-01-445-6260
Stuffing Tube

014456260
13229E0753-1: RNCC: 3 | RNVC: 2
2682: RNCC: 5 | RNVC: 2

9 Jun 1997

5975-01-448-2098
Electrical-Electronic Equipment Panel

014482098
ADTS405-1729-70-M0: RNCC: 3 | RNVC: 2

25 Aug 1997

5975-01-392-6121
Flexible Metal Conduit Assembly

013926121
5909558-11: RNCC: 1 | RNVC: 2
229385-D10343: RNCC: 3 | RNVC: 2
759-245-05: RNCC: 5 | RNVC: 2
759-245-05: RNCC: 5 | RNVC: 9

1 Jul 1994

5975-01-450-6278
Electrical Tie Down Mounting Base

014506278
ABM2S-S6-D: RNCC: 3 | RNVC: 2
12H4793: RNCC: 5 | RNVC: 2
64.36.00.033: RNCC: 5 | RNVC: 2
86-1326374-2: RNCC: 5 | RNVC: 2
64.36.00.033: RNCC: 5 | RNVC: 9
86-1326374: RNCC: D | RNVC: 9

17 Nov 1997

5975-01-450-5607
Blank Panel

014505607
A3192638-3: RNCC: 3 | RNVC: 2

14 Nov 1997

5975-01-450-7350
Electrical Equipment Leg

014507350
P.893657: RNCC: 3 | RNVC: 9
P.893657: RNCC: C | RNVC: 1

20 Nov 1997

5975-01-450-2561
Electronic Junction Rack

014502561
8027520-1-06: RNCC: 3 | RNVC: 2
ARMS-N06: RNCC: 5 | RNVC: 9
ARMS: RNCC: D | RNVC: 9

31 Oct 1997

5975-01-452-1722
Electrical-Electronic Equipment Panel

014521722
106201-40: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-453-5917
Electrical Nonmetallic Conduit Assembly

014535917
200AS349-040BH04054FA132: RNCC: 1 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 3 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 5 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 5 | RNVC: 2

5 Mar 1998

5975-01-456-2624
Flexible Metal Conduit Assembly

014562624
227636-DL0000: RNCC: 3 | RNVC: 2

8 Jun 1998

5975-01-456-4366
Flexible Metal Conduit Assembly

014564366
23A02336-80: RNCC: 3 | RNVC: 2
3260AS458: RNCC: 7 | RNVC: 2

12 Jun 1998

5975-01-456-8553
Flexible Nonmetallic Conduit

014568553
7124491: RNCC: 3 | RNVC: 2
7124491: RNCC: 5 | RNVC: 9

29 Jun 1998

5975-01-457-5094
Electrical Fitting Mounting Base

014575094
1230C81G01: RNCC: 3 | RNVC: 2

24 Jul 1998

5975-01-457-6159
Branched Electrical Power Cable Assembly

014576159
712HL178NF2532-1: RNCC: 3 | RNVC: 2

29 Jul 1998

5975-01-458-8008
Electrical Cable Protector

014588008
12976352: RNCC: 3 | RNVC: 2

10 Sep 1998

5975-01-461-6538
Junction Box

014616538
7325398G001: RNCC: 3 | RNVC: 2
7325398G1: RNCC: 5 | RNVC: 2

22 Dec 1998

5975-01-461-2006
Electronic Junction Rack

014612006
CTJ-3B-12: RNCC: 3 | RNVC: 2
CTJ--EB-12: RNCC: 5 | RNVC: 9
11467243-8: RNCC: 7 | RNVC: 2

3 Dec 1998

5975-01-461-7606
Stuffing Tube

014617606
M24235/15-011: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-7618
Stuffing Tube

014617618
M24235/15-016: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1
M2435/15-016: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-462-2057
Stuffing Tube Adapter

014622057
M24235/15-001: RNCC: 2 | RNVC: 2
NIL-S-24235: RNCC: 4 | RNVC: 1

26 Jan 1999

5975-01-462-3479
Electrical-Electronic Equipment Chassis

014623479
H274A032-10: RNCC: 3 | RNVC: 2

29 Jan 1999

5975-01-462-7223
Stuffing Tube

014627223
1945.3 SIZE C TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-113: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1945.3 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7215
Stuffing Tube

014627215
1945.8 SIZE J TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 9
1945.8 SIZE A TYPE 66: RNCC: 5 | RNVC: 9
9000S620274269-118: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7227
Stuffing Tube

014627227
1945.12 SIZE N TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-122: RNCC: 5 | RNVC: 2
1945.12 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7327
Stuffing Tube

014627327
1990.2 SIZE B TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-142: RNCC: 5 | RNVC: 2
1990.2 SIZE A TYPE 67: RNCC: 5 | RNVC: 9

16 Feb 1999

5975-01-285-0660
Electrical Conduit Coupling Nut

012850660
11300-B-18: RNCC: 3 | RNVC: 1
11300-B-18: RNCC: 3 | RNVC: 9
B-137D164JX2: RNCC: 5 | RNVC: 9

6 Sep 1988

5975-01-285-7319
Electrical Conduit Adapter

012857319
000214261613: RNCC: 3 | RNVC: 2
9-333-101424: RNCC: 5 | RNVC: 2

20 Sep 1988

5975-01-287-5523
Electrical Wall Plate

012875523
86101: RNCC: 3 | RNVC: 9
2801-JI: RNCC: 5 | RNVC: 9
175-1 IV: RNCC: 5 | RNVC: 9
J92071: RNCC: 5 | RNVC: 9
P0-1-I: RNCC: 5 | RNVC: 9
SPO1I: RNCC: 5 | RNVC: 9

23 Oct 1988

5975-01-287-5347
Conduit Outlet

012875347
8905793: RNCC: 3 | RNVC: 2
849183: RNCC: 5 | RNVC: 9

23 Oct 1988

5975-01-291-9328
Cable Terminal Chamber

012919328
200SGL1061: RNCC: 3 | RNVC: 9
200SGL1061: RNCC: 5 | RNVC: 2

7 Jan 1989

5975-01-296-0632
Electrical Conductor Bushing

012960632
74B878001-131: RNCC: 1 | RNVC: 2
CT0904-131: RNCC: 3 | RNVC: 2
74B878001-131: RNCC: 5 | RNVC: 2
10134274: RNCC: 6 | RNVC: 9

16 Mar 1989

5975-01-296-6061
Fanning Strip

012966061
7517533-10: RNCC: 3 | RNVC: 9
7517533-10: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6059
Fanning Strip

012966059
7517533-08: RNCC: 3 | RNVC: 9
7517533-08: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6078
Blank Panel

012966078
6604232: RNCC: 3 | RNVC: 2
6604232: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7090
Fanning Strip

012967090
7517533-02: RNCC: 3 | RNVC: 9
7517533-02: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-294-2133
Cable Hanger

012942133
101-107-399: RNCC: 3 | RNVC: 2

13 Feb 1989

5975-01-296-7104
Flexible Metal Conduit Assembly

012967104
251020-01750: RNCC: 3 | RNVC: 1
750-011NF32-175: RNCC: 3 | RNVC: 1
200188-DI1750: RNCC: 3 | RNVC: 1
10250675-93: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7907
Fanning Strip

012967907
7517533-26: RNCC: 3 | RNVC: 9
7517533-26: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-297-3870
Electrical Conduit Adapter

012973870
10250710-20: RNCC: 3 | RNVC: 2
100235-0020: RNCC: 5 | RNVC: 9
G63164-20: RNCC: 5 | RNVC: 9
100039-FB6200: RNCC: 5 | RNVC: 9

2 Apr 1989

5975-01-297-4925
Electrical Components Tie Down Strap

012974925
SV805620-1: RNCC: 3 | RNVC: 2
S73506-16: RNCC: 5 | RNVC: 9

4 Apr 1989

5975-01-297-6131
Electrical Conduit Adapter

012976131
100235-0038: RNCC: 3 | RNVC: 2
G63164-38: RNCC: 5 | RNVC: 9
100207-FB6200: RNCC: 5 | RNVC: 9
10250710-38: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-302-8285
Flexible Metal Conduit Assembly

013028285
750-011NF16-54: RNCC: 3 | RNVC: 2
200206-DI0540: RNCC: 5 | RNVC: 2
10250675-62: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-299-2468
Electrical Cable Protector

012992468
HT 5/8-N-B-100: RNCC: 3 | RNVC: 2
HT 5/8-N-B: RNCC: 5 | RNVC: 1
S-010: RNCC: 5 | RNVC: 9

28 Apr 1989

5975-01-301-0428
Interior Cable Rack

013010428
60244-40454: RNCC: 3 | RNVC: 2

24 May 1989

5975-01-301-8602
Electrical Conduit Elbow

013018602
C196AX2321DA: RNCC: 3 | RNVC: 2
3AF306XA2321DE: RNCC: 3 | RNVC: 2
151479-2321: RNCC: 5 | RNVC: 9
3AF306XC2321DA: RNCC: 5 | RNVC: 9
3AD306XC2321DE: RNCC: 5 | RNVC: 9
K15K0021-108: RNCC: 5 | RNVC: 9

4 Jun 1989

5975-01-304-1716
Cable Hanger

013041716
1052S/S: RNCC: 3 | RNVC: 2
101-107-072: RNCC: 3 | RNVC: 2
2060SS: RNCC: 5 | RNVC: 2
5975PL1293600: RNCC: 6 | RNVC: 9

13 Jul 1989

5975-01-313-6344
Electrical Nonmetallic Conduit Assembly

013136344
CA-00114: RNCC: 3 | RNVC: 2
CA-00114: RNCC: 5 | RNVC: 9
1532AS586: RNCC: 7 | RNVC: 2

12 Jan 1990

5975-01-313-8181
Electrical Conduit Adapter

013138181
100235-0028: RNCC: 3 | RNVC: 2
G63164-28: RNCC: 3 | RNVC: 2
100210-FB6200: RNCC: 3 | RNVC: 2
10250710-28: RNCC: 7 | RNVC: 2

18 Jan 1990

5975-01-317-5650
Junction Box Cover

013175650
8611387-81: RNCC: 3 | RNVC: 2
GFRWPVFS: RNCC: 5 | RNVC: 9
8611387-81: RNCC: 5 | RNVC: 9
30538: RNCC: 5 | RNVC: 9

1 Apr 1990

5975-01-317-1619
Electrical-Electronic Equipment Chassis

013171619
DAA3383A204-009: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-318-9256
Junction Box

013189256
A1412CHNF: RNCC: 3 | RNVC: 2

27 Apr 1990

5975-01-319-2688
Electrical Components Tie Down Strap

013192688
52070: RNCC: 3 | RNVC: 2
NT-340H: RNCC: 5 | RNVC: 2
L18337: RNCC: 5 | RNVC: 9

4 May 1990

5975-01-320-2564
Electrical Nonmetallic Conduit Assembly

013202564
5188105-151: RNCC: 1 | RNVC: 2
759-192-151: RNCC: 3 | RNVC: 2
206-151-DI0560: RNCC: 3 | RNVC: 2

23 May 1990

5975-01-320-2560
Electrical Conduit Adapter

013202560
100235-0017: RNCC: 3 | RNVC: 2
G63164-17: RNCC: 5 | RNVC: 2
100026-FB6200: RNCC: 5 | RNVC: 2
10250710-17: RNCC: 7 | RNVC: 2

23 May 1990

5975-01-321-3292
Junction Box Cover

013213292
T2048EJ: RNCC: 3 | RNVC: 2

15 Jun 1990

5975-01-324-5710
Wire Strand Hanger

013245710
8394947-501: RNCC: 3 | RNVC: 2
8394947: RNCC: 5 | RNVC: 9

19 Aug 1990

5975-01-324-7202
Ground Rod

013247202
6258: RNCC: 3 | RNVC: 2

22 Aug 1990

5975-01-352-0285
Stuffing Tube

013520285
NCGB1232: RNCC: 3 | RNVC: 2
NCGB1232-SG: RNCC: 5 | RNVC: 9
13229E0738-3: RNCC: 7 | RNVC: 2

18 Jan 1992

5975-01-353-4843
Electrical Conduit Adapter

013534843
6323440-1: RNCC: 3 | RNVC: 2
1046-3: RNCC: 5 | RNVC: 9
1046-3: RNCC: C | RNVC: 1

12 Feb 1992

Load More Results