What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 90 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 90 of 176

5975-01-497-0113
Ground Rod Coupling

014970113
GRC58: RNCC: 3 | RNVC: 2
99002C8008-7: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

6 May 2002

5975-01-497-2105
Electrical Components Tie Down Strap

014972105
PLF1MA-C: RNCC: 3 | RNVC: 2

13 May 2002

5975-01-497-9071
Flexible Nonmetallic Conduit

014979071
SAE-AS81914/6: RNCC: 3 | RNVC: 1
M81914/6-1007: RNCC: 3 | RNVC: 2
M81914/6-1007: RNCC: 3 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
SAE AS81914/6: RNCC: 5 | RNVC: 9
AMS-T81914/6: RNCC: 5 | RNVC: 9
M81914/6-1007: RNCC: 5 | RNVC: 9

7 Jun 2002

5975-01-500-1773
Electrical Components Tie Down Strap

015001773
01-02694: RNCC: 3 | RNVC: 2
01-02694: RNCC: 3 | RNVC: 9
01-02694: RNCC: 5 | RNVC: 2

15 Aug 2002

5975-01-499-0496
Electrical Conduit Adapter

014990496
SE23F1805-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-501-4258
Ang Cable Tie Mount

015014258
CB4020G2N8: RNCC: 3 | RNVC: 2

1 Oct 2002

5975-01-501-4449
Cable Marker Sleeve

015014449
HT-SCE-1-2.0-9: RNCC: 3 | RNVC: 2

2 Oct 2002

5975-01-502-2436
Electrical Tie Down Mounting Base

015022436
CB4021G3N24: RNCC: 3 | RNVC: 2
NGM801C-G3N24: RNCC: 7 | RNVC: 9
NGM801C-G3N24: RNCC: C | RNVC: 1

29 Oct 2002

5975-01-504-5477
Electrical Equipment Mounting Base

015045477
200-85317-101: RNCC: 3 | RNVC: 2
MT6-8316-101: RNCC: 5 | RNVC: 1
247-1026-010: RNCC: 5 | RNVC: 1
247-1026: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-507-7455
Electrical Equipment Drawer

015077455
7084930: RNCC: 3 | RNVC: 2
481-8216693-3: RNCC: 5 | RNVC: 2
481-8216694-A1A8: RNCC: 5 | RNVC: 2
H678-3724-3: RNCC: 5 | RNVC: 2
H678-3731-A1A8: RNCC: 5 | RNVC: 2
M130BA-1-0-0-3-1: RNCC: 5 | RNVC: 2
H678-3734-A1A8: RNCC: 5 | RNVC: 2

5 May 2003

5975-01-507-6553
Tiedo Mounting Base

015076553
CB4020G3N6: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-8059
Rigid Metal Conduit

015078059
2112-3014: RNCC: 3 | RNVC: 9
2112-3014: RNCC: 5 | RNVC: 2
2112-3014: RNCC: 5 | RNVC: 2

6 May 2003

5975-01-508-1588
Electrical Conduit Ferrule

015081588
0409500000: RNCC: 3 | RNVC: 2
40950: RNCC: 5 | RNVC: 2

14 May 2003

5975-01-512-7786
Flexible Metal Conduit Assembly

015127786
CA00884-4A4WE3W00381: RNCC: 3 | RNVC: 2
CA00884-4A4WE3W00381: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-7796
Flexible Metal Conduit Assembly

015127796
CA00884-4A4WE3W00422: RNCC: 3 | RNVC: 2
CA00884-4A4WE3W00422: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-7833
Flexible Metal Conduit Assembly

015127833
CA00884-3G3WG3W01142: RNCC: 3 | RNVC: 2
CA00884-3G3WG3W01142: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-7632
Spacer Front Wiper

015137632
1001081306: RNCC: 3 | RNVC: 2
D70121: RNCC: 5 | RNVC: 1
8036671: RNCC: 5 | RNVC: 9
8036671: RNCC: 5 | RNVC: 9

6 Oct 2003

5975-01-513-4462
Electrical Tie Down Mounting Base

015134462
LKCSF1-0: RNCC: 3 | RNVC: 2
2041341C1: RNCC: 5 | RNVC: 2
2041341C1: RNCC: 5 | RNVC: 9
LKCSF 1: RNCC: 5 | RNVC: 9

25 Sep 2003

5975-01-515-0548
Electrical Components Tie Down Strap

015150548
T120R0H4: RNCC: 3 | RNVC: 2
TY27MX: RNCC: 3 | RNVC: 2
127995A: RNCC: 5 | RNVC: 9
127995A: RNCC: 5 | RNVC: 9
12603148: RNCC: 7 | RNVC: 2

14 Nov 2003

5975-01-515-0619
Flexible Nonmetallic Conduit

015150619
2HA847: RNCC: 3 | RNVC: 2
2HA847: RNCC: 3 | RNVC: 9
4100033: RNCC: 5 | RNVC: 2

14 Nov 2003

5975-01-519-0722
Insulator Bracket

015190722
DG-0213-01 ITEM 5: RNCC: 3 | RNVC: 2
D-22888: RNCC: 5 | RNVC: 2

5 Apr 2004

5975-01-518-9848
Raceway Cover

015189848
382027-1: RNCC: 3 | RNVC: 2
382027-1: RNCC: 5 | RNVC: 9

31 Mar 2004

5975-01-520-5557
Cable Strain Relief Bushing

015205557
00704-0845-0001: RNCC: 3 | RNVC: 2

17 May 2004

5975-01-523-3364
Junction Box

015233364
4KP27: RNCC: 3 | RNVC: 2
SC060604: RNCC: 5 | RNVC: 9

30 Aug 2004

5975-01-523-8494
Electrical Conduit Adapter

015238494
713HL100NF15132: RNCC: 3 | RNVC: 2

16 Sep 2004

5975-01-525-1716
Cable Marker Sleeve

015251716
HS048WE1NF038: RNCC: 3 | RNVC: 2
16100531-017: RNCC: 5 | RNVC: 2
16100531-017: RNCC: 5 | RNVC: 2

29 Oct 2004

5975-01-525-7728
Cable Marker Tape

015257728
19C0531: RNCC: 3 | RNVC: 2
0209790 FIND 9: RNCC: 5 | RNVC: 2
TZES241: RNCC: 5 | RNVC: 2
TZ-S241: RNCC: 5 | RNVC: 9

23 Nov 2004

5975-01-524-9811
Electrical Components Tie Down Strap

015249811
RD-5-4137-0M: RNCC: 3 | RNVC: 2
RD-5-4137-0P: RNCC: 5 | RNVC: 9
RD-2-421: RNCC: D | RNVC: 9

25 Oct 2004

5975-01-527-4670
Flexible Nonmetallic Conduit

015274670
744VC110NFT64T24-24-4: RNCC: 3 | RNVC: 2

3 Feb 2005

5975-01-526-8970
Electrical Nonmetallic Conduit Assembly

015268970
740VC110NFN40T24-24-7: RNCC: 3 | RNVC: 2

12 Jan 2005

5975-01-527-2628
Electronic Equipment Mounting Tray

015272628
4K99006-103A: RNCC: 1 | RNVC: 2
5879885G3: RNCC: 3 | RNVC: 2

26 Jan 2005

5975-01-528-9463
Electrical-Electronic Equipment Panel

015289463
5749760-047: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-532-2582
Flexible Metal Conduit Assembly

015322582
11477938-1: RNCC: 3 | RNVC: 2
23A02561C61C61-40E192: RNCC: 5 | RNVC: 2
759-415-1: RNCC: 5 | RNVC: 2
11477938: RNCC: 7 | RNVC: 2

3 Aug 2005

5975-01-532-2974
Strain Electrical Conductor Clamp

015322974
30-302-3D03G12: RNCC: 1 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-533-0967
Electrical Conduit Elbow

015330967
ELMF90-100: RNCC: 3 | RNVC: 2
ELMF90-100: RNCC: 5 | RNVC: 9

31 Aug 2005

5975-01-533-9901
Stuffing Tube

015339901
6878099-1: RNCC: 1 | RNVC: 2
M19622/4-04MOD3/4: RNCC: 3 | RNVC: 2
470-6878099: RNCC: D | RNVC: 9

4 Oct 2005

5975-01-534-3345
Electrical Components Tie Down Strap

015343345
9000701-101 ITEM # 93: RNCC: 3 | RNVC: 2
94905K63: RNCC: 5 | RNVC: 2

18 Oct 2005

5975-01-534-5817
Cable Terminal Chamber

015345817
G1.5X2WH6A: RNCC: 3 | RNVC: 2
G1.5X2WH6: RNCC: 5 | RNVC: 9
36897-700: RNCC: D | RNVC: 9

26 Oct 2005

5975-01-537-0953
Flexible Metal Conduit Assembly

015370953
23A02863-37: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-538-3922
Electrical Box Connector

015383922
773-164: RNCC: 3 | RNVC: 9
78092093280: RNCC: 5 | RNVC: 9

21 Mar 2006

5975-01-538-7844
Rigid Metal Conduit Assembly

015387844
23A02829-1: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-540-4323
Stuffing Tube

015404323
630A007NF063H: RNCC: 3 | RNVC: 2
741414 ITEM 34: RNCC: 5 | RNVC: 2
741413 ITEM 34: RNCC: 5 | RNVC: 2
741412 ITEM 34: RNCC: 5 | RNVC: 2

18 May 2006

5975-01-543-9014
Strain Electrical Conductor Clamp

015439014
30-302-2C10G16: RNCC: 1 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-544-7775
Tiedo Mounting Base

015447775
CB4020G5N12: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-545-0576
Electrical-Electronic Equipment Chassis

015450576
4502202: RNCC: 3 | RNVC: 2

31 Oct 2006

5975-01-545-3411
Strain Electrical Conductor Clamp

015453411
30-302-1D03J08: RNCC: 3 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2

9 Nov 2006

5975-01-547-4358
Electronic Equipment Mounting Tray

015474358
235A901-1: RNCC: 3 | RNVC: 2

22 Jan 2007

5975-01-547-6700
Nonmetallic Raceway Assembly

015476700
A479980100: RNCC: 3 | RNVC: 2
A47998.0100: RNCC: 5 | RNVC: 2
CV187839: RNCC: 5 | RNVC: 2
A47998.0100: RNCC: 5 | RNVC: 2

29 Jan 2007

5975-01-548-5450
Junction Box

015485450
306-0199: RNCC: 3 | RNVC: 2

27 Feb 2007

5975-01-548-7799
Guide Rail

015487799
9080MH320: RNCC: 3 | RNVC: 9

5 Mar 2007

5975-01-549-5733
Jumper Buswork Hanger

015495733
201-8205992 ITEM NO 14: RNCC: 3 | RNVC: 2

23 Mar 2007

5975-01-549-6094
Electrical Cable Protector

015496094
12498435: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-549-6288
Electrical Conduit Ferrule Anchor Plate

015496288
223-8205993 ITEM NO 13: RNCC: 3 | RNVC: 2

27 Mar 2007

5975-01-493-5448
Rigid Metal Conduit Assembly

014935448
23A02922-11: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

9 Jan 2002

5975-01-493-2766
Mounting Strap

014932766
17-1-5523-6: RNCC: 3 | RNVC: 2
17-1-5523-6: RNCC: 5 | RNVC: 9
17-1-5523-6: RNCC: 5 | RNVC: 9
17-1-5523-6: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-494-7242
Electrical Conduit Adapter

014947242
16854R3232-55-0: RNCC: 3 | RNVC: 2
16854: RNCC: D | RNVC: 9

21 Feb 2002

5975-01-485-7922
Rigid Metal Conduit Assembly

014857922
23A02336-51: RNCC: 3 | RNVC: 2
93160180: RNCC: 5 | RNVC: 1
3260AS418: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-487-5380
Electrical Cable Protector

014875380
13010048-2: RNCC: 3 | RNVC: 2
13010048: RNCC: D | RNVC: 9

9 Aug 2001

5975-01-463-6607
Flexible Metal Conduit Assembly

014636607
5909558-13: RNCC: 3 | RNVC: 2

31 Mar 1999

5975-01-464-0675
Electrical Box Connector

014640675
RJPCB-6-J-F: RNCC: 3 | RNVC: 2

15 Apr 1999

5975-01-464-2867
Flexible Metal Conduit Assembly

014642867
3260AS403: RNCC: 1 | RNVC: 2
23A02336-38: RNCC: 3 | RNVC: 2

23 Apr 1999

5975-01-468-6319
Electrical Conduit Tee

014686319
863-000803: RNCC: 3 | RNVC: 1
T50-M: RNCC: 3 | RNVC: 2

18 Oct 1999

5975-01-469-7981
Stuffing Tube Plug

014697981
WD-4011: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-469-5460
Flexible Nonmetallic Conduit

014695460
120-001-12: RNCC: 3 | RNVC: 2
120-001: RNCC: D | RNVC: 9

15 Nov 1999

5975-01-471-8638
Strain Electrical Conductor Clamp

014718638
30-302-2D06G15: RNCC: 3 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8617
Strain Electrical Conductor Clamp

014718617
30-302-2D04J15: RNCC: 3 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8705
Strain Electrical Conductor Clamp

014718705
30-302-2D06J16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0298
Strain Electrical Conductor Clamp

014720298
30-302-1D03G11: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0841
Strain Electrical Conductor Clamp

014720841
30-302-2D12G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-1116
Strain Electrical Conductor Clamp

014721116
30-302-2D04G08: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0213
Strain Electrical Conductor Clamp

014720213
30-302-2D04G10: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-473-3574
Junction Box Assembly

014733574
A02E2766-5: RNCC: 3 | RNVC: 2

6 Apr 2000

5975-01-474-1888
Electrical Cable Nipple

014741888
0375197: RNCC: 3 | RNVC: 2

27 Apr 2000

5975-01-478-8151
Electrical Equipment Mounting Base

014788151
BKL-4: RNCC: 3 | RNVC: 2

28 Sep 2000

5975-01-480-0068
Electrical Tie Down Mounting Base

014800068
HS5837CR3N: RNCC: 1 | RNVC: 2
CB3019CR3N: RNCC: 3 | RNVC: 2
CB3019: RNCC: D | RNVC: 9

3 Nov 2000

5975-01-480-1955
Mate Aircraft Gland

014801955
3921536-101: RNCC: 3 | RNVC: 2
3921536-101: RNCC: 3 | RNVC: 9

9 Nov 2000

5975-01-480-3196
Metallic Raceway Assembly

014803196
12416386: RNCC: 3 | RNVC: 2
12416386: RNCC: 5 | RNVC: 9

15 Nov 2000

5975-01-480-5420
Flexible Metal Conduit

014805420
12421663-002: RNCC: 3 | RNVC: 2
54020003: RNCC: 5 | RNVC: 2
12421663-002: RNCC: 5 | RNVC: 2
74115K62: RNCC: 5 | RNVC: 2
12421663: RNCC: D | RNVC: 9

27 Nov 2000

5975-01-480-6330
Electrical Box Connector

014806330
802027107404-1: RNCC: 3 | RNVC: 2
21A45138-1: RNCC: 5 | RNVC: 2
380FA010NF2409F-7A: RNCC: 5 | RNVC: 2
802027107404: RNCC: D | RNVC: 9

29 Nov 2000

5975-01-482-9629
Electrical Components Tie Down Strap

014829629
PLP2S: RNCC: 3 | RNVC: 2
PLP2S-C: RNCC: 5 | RNVC: 1
SS-26803: RNCC: D | RNVC: 9

12 Mar 2001

5975-01-483-3228
Electronic Equipment Mounting Tray

014833228
95577-5: RNCC: 3 | RNVC: 2
95577-5: RNCC: 3 | RNVC: 2
95577-5: RNCC: 5 | RNVC: 9

23 Mar 2001

5975-01-484-1150
Electrical Cable Protector

014841150
12339331: RNCC: 3 | RNVC: 2
5975PL0732956: RNCC: 6 | RNVC: 9

19 Apr 2001

5975-01-484-3219
Rigid Metal Conduit

014843219
68A780630-1001: RNCC: 3 | RNVC: 2

25 Apr 2001

5975-01-484-1286
Electrical Equipment Rack

014841286
0072991: RNCC: 3 | RNVC: 2
0072991: RNCC: D | RNVC: 9

19 Apr 2001

5975-01-484-7719
Electrical Equipment Shelf

014847719
LSCP260043: RNCC: 3 | RNVC: 2

8 May 2001

5975-01-493-2748
Mounting Strap

014932748
17-1-5523-5: RNCC: 3 | RNVC: 2
17-1-5523-5: RNCC: 5 | RNVC: 9
17-1-5523-5: RNCC: 5 | RNVC: 9
17-1-5523-5: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-485-7942
Rigid Metal Conduit Assembly

014857942
23A02336-24: RNCC: 3 | RNVC: 2
93160158: RNCC: 5 | RNVC: 1
3260AS388: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7943
Rigid Metal Conduit Assembly

014857943
23A02336-19: RNCC: 3 | RNVC: 2
93160154: RNCC: 5 | RNVC: 1
3260AS381: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-8769
Electrical Fitting Mounting Base

014858769
07197: RNCC: 3 | RNVC: 2
1000251: RNCC: 3 | RNVC: 2
540GA: RNCC: 5 | RNVC: 1
17KP737: RNCC: 5 | RNVC: 2
17KP737: RNCC: 5 | RNVC: 9
2025905: RNCC: D | RNVC: 9

11 Jun 2001

5975-01-495-2529
Electrical Equipment Mounting Base

014952529
12422696: RNCC: 3 | RNVC: 2
12422696: RNCC: 5 | RNVC: 2
12422696: RNCC: 5 | RNVC: 2

11 Mar 2002

5975-01-496-3973
Electrical Cable Assembly Protector

014963973
29529973: RNCC: 3 | RNVC: 2
10025304: RNCC: 5 | RNVC: 2
5HA261: RNCC: 5 | RNVC: 2
5HA261: RNCC: 5 | RNVC: 9

15 Apr 2002

5975-01-496-9985
Electrical-Electronic Equipment Panel

014969985
12460982: RNCC: 3 | RNVC: 2

6 May 2002

5975-01-500-1105
Electronic Equipment Mounting Tray

015001105
ASP-A761SDU-108: RNCC: 3 | RNVC: 2

13 Aug 2002

5975-01-500-4980
Electrical Conduit Adapter

015004980
6A415: RNCC: 3 | RNVC: 2

28 Aug 2002

5975-01-501-6482
Electrical Components Tie Down Strap

015016482
TY34M: RNCC: 3 | RNVC: 2
950-31593-1: RNCC: 5 | RNVC: 2
950-31593: RNCC: D | RNVC: 9

9 Oct 2002

5975-01-502-5503
Ligh Strap Assemlby

015025503
5-4-7024-1: RNCC: 3 | RNVC: 2

10 Nov 2002

5975-01-502-7336
Electrical-Electronic Equipment Chassis

015027336
713260-1: RNCC: 3 | RNVC: 2

19 Nov 2002

5975-01-502-4984
Electrical-Electronic Equipment Panel

015024984
20835-598: RNCC: 3 | RNVC: 2
844481-1: RNCC: 5 | RNVC: 2
844481-1: RNCC: 5 | RNVC: 9
844481: RNCC: D | RNVC: 9

7 Nov 2002

5975-01-506-9606
Cable Hanger

015069606
9M-17: RNCC: 3 | RNVC: 2
6512E17PN83: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-507-6545
Tiedo Mounting Base

015076545
CB4019G5N750: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-6550
Mount

015076550
CB4020G2N6: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-9685
Electrical Components Tie Down Strap

015079685
170353: RNCC: 3 | RNVC: 2
170353: RNCC: 5 | RNVC: 2
CS PL VO 120 103: RNCC: 5 | RNVC: 2
170353: RNCC: 5 | RNVC: 9

8 May 2003

5975-01-508-7041
Electrical Conduit Adapter

015087041
S4270F2828S-34-4: RNCC: 3 | RNVC: 2
949239970-25: RNCC: 5 | RNVC: 2
S4270: RNCC: D | RNVC: 9

30 May 2003

5975-01-507-6552
Tiedo Mounting Base

015076552
CB4021G3N8: RNCC: 3 | RNVC: 2
193527052: RNCC: 5 | RNVC: 2

1 May 2003

5975-01-509-0258
Guide Rail

015090258
6ES7390-1AE80-0AA0: RNCC: 3 | RNVC: 2

10 Jun 2003

5975-01-511-5062
Electrical Nonmetallic Conduit Assembly

015115062
R58HB59H59A006: RNCC: 3 | RNVC: 2
252842: RNCC: 5 | RNVC: 9

11 Aug 2003

5975-01-511-4787
Electrical Cable Nipple

015114787
TC-600-NMH: RNCC: 3 | RNVC: 2

11 Aug 2003

5975-01-512-3607
Electrical Conduit Coupling Nut Clamp

015123607
GMA.1B.054.DN: RNCC: 3 | RNVC: 2
GMA.IB.054.DN: RNCC: 5 | RNVC: 9

28 Aug 2003

5975-01-512-7606
Flexible Metal Conduit Assembly

015127606
CA00884-6A6WB8W00532: RNCC: 3 | RNVC: 2
CA00884-6A6WB8W00532: RNCC: 5 | RNVC: 2

9 Sep 2003

5975-01-512-7603
Flexible Metal Conduit Assembly

015127603
CA00884-6A6WB7W00490: RNCC: 3 | RNVC: 2
CA00884-6A6WB7W00490: RNCC: 5 | RNVC: 2

9 Sep 2003

5975-01-514-8027
Electrical Nonmetallic Conduit Assembly

015148027
R58HB18F36W024A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

5 Nov 2003

5975-01-519-2831
Electrical Components Tie Down Strap

015192831
PLT-5-HL: RNCC: 3 | RNVC: 2

13 Apr 2004

5975-01-519-2771
Electrical-Electronic Equipment Chassis

015192771
12383967-1: RNCC: 3 | RNVC: 2
12383967: RNCC: D | RNVC: 9

13 Apr 2004

5975-01-520-4864
Blank Panel

015204864
660514-801: RNCC: 3 | RNVC: 2

13 May 2004

5975-01-521-7043
Strain Electrical Conductor Clamp

015217043
608-305-2: RNCC: 3 | RNVC: 9
608-305-2: RNCC: C | RNVC: 1

30 Jun 2004

5975-01-522-6473
Electrical Box Connector

015226473
3303-TB: RNCC: 3 | RNVC: 2
3303-TB: RNCC: 5 | RNVC: 9

6 Aug 2004

5975-01-523-4133
Electrical-Electronic Equipment Chassis

015234133
735353-1: RNCC: 3 | RNVC: 9
735353-1: RNCC: C | RNVC: 1
735353: RNCC: D | RNVC: 9

1 Sep 2004

5975-01-523-4302
Electrical Components Tie Down Strap

015234302
N-07-G10: RNCC: 3 | RNVC: 2
6912K54: RNCC: 5 | RNVC: 2

1 Sep 2004

5975-01-523-2766
Electrical Conduit Tee

015232766
710-108NFA32B32C32: RNCC: 3 | RNVC: 2

26 Aug 2004

5975-01-529-3280
Electrical-Electronic Equipment Panel

015293280
5749063-035: RNCC: 3 | RNVC: 2
438-5749063: RNCC: D | RNVC: 9

13 Apr 2005

5975-01-532-0371
Electrical-Electronic Equipment Chassis

015320371
DE200 SCSI 68P U160: RNCC: 3 | RNVC: 2
6176-1300-0000: RNCC: 5 | RNVC: 9
S20A108: RNCC: 5 | RNVC: 9

26 Jul 2005

5975-01-532-2984
Strain Electrical Conductor Clamp

015322984
30-302-3D11G12: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-533-7403
Nonmetallic Raceway

015337403
A479980300: RNCC: 3 | RNVC: 2
CV187337: RNCC: 5 | RNVC: 2
A47998.0300: RNCC: 5 | RNVC: 2
A47998.0300: RNCC: 5 | RNVC: 2

26 Sep 2005

5975-01-533-6205
Conduit Outlet Cover

015336205
A-S075-SS: RNCC: 3 | RNVC: 2
A3193087-011: RNCC: 7 | RNVC: 2

21 Sep 2005

5975-01-534-1861
Electronic Equipment Mounting Tray

015341861
7450175-2: RNCC: 3 | RNVC: 2

12 Oct 2005

5975-01-538-2227
Interconnecting Cabinet

015382227
01015-000: RNCC: 3 | RNVC: 2

15 Mar 2006

5975-01-541-4223
Blank Panel

015414223
FP52A4HP: RNCC: 3 | RNVC: 2

27 Jun 2006

5975-01-541-6032
Electrical Tie Down Mounting Base

015416032
1331AS107-1: RNCC: 3 | RNVC: 2
1331AS107-1: RNCC: 7 | RNVC: 2

3 Jul 2006

5975-01-544-0679
Electrical Equipment Mounting Base

015440679
282615-1: RNCC: 3 | RNVC: 2
282615: RNCC: D | RNVC: 9

29 Sep 2006

5975-01-544-4042
Cord Assembly Fastener

015444042
STAYPUT-B: RNCC: 3 | RNVC: 9

12 Oct 2006

5975-01-545-0165
Electrical-Electronic Equipment Chassis

015450165
1001-7100: RNCC: 3 | RNVC: 2
1001-7100: RNCC: 5 | RNVC: 2

30 Oct 2006

5975-01-546-0510
Electrical Cable Protector

015460510
A495620200: RNCC: 3 | RNVC: 2
A49562.0200: RNCC: 5 | RNVC: 2
CV185382: RNCC: 5 | RNVC: 2
A49562.0200: RNCC: 5 | RNVC: 2

5 Dec 2006

5975-01-549-1865
Electrical-Electronic Equipment Chassis

015491865
A60-STIFF-1350: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-5994
Electrical Equipment Mounting Base

015495994
50-9788-011: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-549-6079
Electrical Conduit Ferrule Anchor Plate

015496079
223-8205993 ITEM NO 11: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-550-0299
Electrical Cable Protector

015500299
222A306-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-01-482-6997
Electrical Grounding Plate

014826997
901-011-259-101: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-472-0241
Strain Electrical Conductor Clamp

014720241
30-302-2D06G17: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-9526
Electrical Components Tie Down Strap

014729526
214LF002: RNCC: 3 | RNVC: 2
320-396-501-0: RNCC: 5 | RNVC: 2

22 Mar 2000

5975-01-472-0853
Strain Electrical Conductor Clamp

014720853
30-302-2D17G06: RNCC: 3 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-541-1586
Electrical Cable Protector

015411586
0636-GG5-J08: RNCC: 3 | RNVC: 2
0636-GG5-J08: RNCC: 3 | RNVC: 9

16 Jun 2006

5975-01-543-6602
Electrical Equipment Mounting Base

015436602
16E3114-13: RNCC: 3 | RNVC: 2

19 Sep 2006

5975-01-543-9012
Strain Electrical Conductor Clamp

015439012
30-302-2C09G04: RNCC: 1 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-7764
Aircra Wireway Tube

015437764
B93697-1: RNCC: 3 | RNVC: 2
B93697-1: RNCC: 5 | RNVC: 9

21 Sep 2006

5975-01-472-1110
Strain Electrical Conductor Clamp

014721110
30-302-1D08G03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-462-7319
Stuffing Tube

014627319
1990.7 SIZE G TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-147: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-464-8196
Junction Box

014648196
9325A08-3038-01: RNCC: 3 | RNVC: 2
Q13138PCE: RNCC: 5 | RNVC: 2
Q13138PCE: RNCC: 5 | RNVC: 9

11 May 1999

5975-01-469-0892
Electrical Cable Protector

014690892
CP5X125-GP-O/Y: RNCC: 3 | RNVC: 9
UG5140-YEL/ORG: RNCC: 5 | RNVC: 2
CP5-36-ED: RNCC: 5 | RNVC: 2
CP5X125-GP-O/Y: RNCC: 5 | RNVC: 9
CP5X125: RNCC: 5 | RNVC: 9
UG5140-YEL/ORG: RNCC: 5 | RNVC: 9

2 Nov 1999

5975-01-470-4780
Cable Marker Sleeve

014704780
HT-SCE-1/8-2.0-9: RNCC: 3 | RNVC: 2
HT-SCE-1/8-2.0-9: RNCC: 5 | RNVC: 1
HT-SCE: RNCC: 5 | RNVC: 1

21 Dec 1999

5975-01-471-0223
Electrical Cable Nipple

014710223
727401: RNCC: 3 | RNVC: 9
727401: RNCC: 5 | RNVC: 9

20 Jan 2000

5975-01-471-8471
Strain Electrical Conductor Clamp

014718471
30-302-1D08J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8482
Electrical Tie Down Mounting Base

014718482
BACM14J1-1: RNCC: 3 | RNVC: 2
BACM14J1-1: RNCC: 5 | RNVC: 2
BACM14J1-1: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8618
Strain Electrical Conductor Clamp

014718618
30-302-2D15J04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9499
Strain Electrical Conductor Clamp

014719499
30-302-2D12G05: RNCC: 3 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0237
Strain Electrical Conductor Clamp

014720237
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0314
Strain Electrical Conductor Clamp

014720314
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0454
Strain Electrical Conductor Clamp

014720454
30-302-1C09J03: RNCC: 1 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0463
Strain Electrical Conductor Clamp

014720463
30-302-1C11J03: RNCC: 1 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0591
Strain Electrical Conductor Clamp

014720591
30-302-2D10G05: RNCC: 3 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-463-3650
Electrical-Electronic Equipment Panel

014633650
12387126-2: RNCC: 3 | RNVC: 2

18 Mar 1999

5975-01-485-7904
Rigid Metal Conduit Assembly

014857904
23A02336-101: RNCC: 3 | RNVC: 2
3260AS558: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7915
Rigid Metal Conduit Assembly

014857915
23A02336-61: RNCC: 3 | RNVC: 2
93160189: RNCC: 5 | RNVC: 1
3260AS429: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-473-4186
Electrical-Electronic Equipment Panel

014734186
HM022-448-11: RNCC: 3 | RNVC: 2

7 Apr 2000

5975-01-475-5004
Electrical Conduit Adapter

014755004
CA011016: RNCC: 3 | RNVC: 9
50-60-0095: RNCC: 5 | RNVC: 2

6 Jun 2000

5975-01-475-5874
Electronic Equipment Mounting Tray

014755874
17S194-01: RNCC: 3 | RNVC: 2
17S194-01: RNCC: 5 | RNVC: 2
17S194-01: RNCC: 5 | RNVC: 2

8 Jun 2000

5975-01-476-5675
Electrical Tie Down Mounting Base

014765675
ABMM-AT-D: RNCC: 3 | RNVC: 2

17 Jul 2000

5975-01-477-1659
Electrical Cable Nipple

014771659
7172000563: RNCC: 3 | RNVC: 2

1 Aug 2000

5975-01-478-5123
Flexible Nonmetallic Conduit

014785123
120-001-24: RNCC: 3 | RNVC: 2
GS830BM7: RNCC: 5 | RNVC: 1
CONVOLEX-3/4-0-SPCS5807: RNCC: 5 | RNVC: 2
RT1150 CONVOLEX .75: RNCC: 5 | RNVC: 9
RT48 CONVOLEX .75: RNCC: 5 | RNVC: 9
GS830BM: RNCC: D | RNVC: 9

15 Sep 2000

5975-01-478-8685
Guide Rail

014788685
A35486.0100: RNCC: 3 | RNVC: 2

29 Sep 2000

5975-01-479-3710
Electrical-Electronic Equipment Chassis

014793710
M1050-00229: RNCC: 3 | RNVC: 2
FK23018P1: RNCC: 5 | RNVC: 2

19 Oct 2000

5975-01-480-2517
Electrical Box Entry Flange

014802517
12421656: RNCC: 3 | RNVC: 2
12421656: RNCC: 5 | RNVC: 2
12421656: RNCC: D | RNVC: 9

13 Nov 2000

5975-01-480-2813
Junction Box Cover

014802813
0790: RNCC: 3 | RNVC: 2
A-403DSC: RNCC: 5 | RNVC: 9

14 Nov 2000

5975-01-480-2815
Electrical Box Connector

014802815
0362: RNCC: 3 | RNVC: 2
4Q-975: RNCC: 5 | RNVC: 1

14 Nov 2000

5975-01-491-7539
Electrical Components Tie Down Strap

014917539
3955T348: RNCC: 3 | RNVC: 2

31 Oct 2001

5975-01-492-6386
Electrical Tie Down Mounting Base

014926386
CB9151V5: RNCC: 3 | RNVC: 2
7087016: RNCC: 5 | RNVC: 2
AW001CL008-CM: RNCC: 5 | RNVC: 2
5975PL1856667: RNCC: 6 | RNVC: 9
5975PL2129925: RNCC: 6 | RNVC: 9
CB9151: RNCC: D | RNVC: 9

7 Dec 2001

5975-01-494-5256
Flexible Nonmetallic Conduit

014945256
B2050: RNCC: 3 | RNVC: 2
89F2833: RNCC: 5 | RNVC: 2
0212349 FIND 5: RNCC: 5 | RNVC: 2
B2050: RNCC: 5 | RNVC: 9

14 Feb 2002

5975-01-495-8568
Common Mode Choke

014958568
M2022-ALB: RNCC: 3 | RNVC: 2
M2022-A: RNCC: 3 | RNVC: 9

27 Mar 2002

5975-01-496-0334
Panel

014960334
07.0703.0279: RNCC: 3 | RNVC: 9
07.0703.0279: RNCC: 5 | RNVC: 2

29 Mar 2002

5975-01-496-5270
Electrical Cable Protector

014965270
CP5X125-GP: RNCC: 3 | RNVC: 9
UG5140-O/Y: RNCC: 5 | RNVC: 2
CP5XGP5-BB: RNCC: 5 | RNVC: 9

18 Apr 2002

5975-01-496-5274
Electrical Cable Protector

014965274
CP1X125-GP: RNCC: 3 | RNVC: 9
01290188: RNCC: 5 | RNVC: 2
CP1X125-GP: RNCC: 5 | RNVC: 9

18 Apr 2002

5975-01-496-7910
Electrical Nonmetallic Conduit Assembly

014967910
R58HA14F35X012A: RNCC: 3 | RNVC: 2
R58HA14F35X012A: RNCC: 5 | RNVC: 2
R58HA14F35X012A: RNCC: 5 | RNVC: 2
R58HA14F35X012A: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-500-0684
Electrical Box Connector

015000684
16905B: RNCC: 3 | RNVC: 2
7119K82: RNCC: 5 | RNVC: 2
7119K82: RNCC: 5 | RNVC: 9

13 Aug 2002

5975-01-500-0690
Electrical Conduit Coupling

015000690
46685K464: RNCC: 3 | RNVC: 2

13 Aug 2002

5975-01-500-4249
Electrical Cable Nipple

015004249
600N7T02: RNCC: 3 | RNVC: 2
10656641-1: RNCC: 5 | RNVC: 2

26 Aug 2002

5975-01-503-7177
Electrical Components Tie Down Strap

015037177
8584001: RNCC: 3 | RNVC: 2
8584001: RNCC: 5 | RNVC: 9

6 Jan 2003

5975-01-504-5328
Electrical Conduit Bushing

015045328
816-3366-001: RNCC: 3 | RNVC: 2
816-3366: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-505-7148
Electrical Grounding Plate

015057148
A-6529: RNCC: 3 | RNVC: 2
A-6529: RNCC: 5 | RNVC: 9
A-6529: RNCC: 5 | RNVC: 9

13 Mar 2003

5975-01-506-4998
Electronic Equipment Mounting Tray

015064998
MT6-8312-107: RNCC: 3 | RNVC: 2
MT6-8312-107: RNCC: 3 | RNVC: 9

31 Mar 2003

5975-01-507-1855
Junction Box Cover

015071855
11B254103: RNCC: 3 | RNVC: 2
Q0403L60NRB: RNCC: 5 | RNVC: 2

22 Apr 2003

5975-01-507-6542
Tiedo Mounting Base

015076542
CB4019G2N: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-508-5639
Electrical-Electronic Equipment Chassis

015085639
76-35221 ITEM 9: RNCC: 3 | RNVC: 2
76-A8710-8: RNCC: 5 | RNVC: 2
76-35221: RNCC: D | RNVC: 9

27 May 2003

5975-01-509-8100
Rigid Metal Conduit Assembly

015098100
23A02863-27: RNCC: 3 | RNVC: 2
D0090054-227: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-512-7555
Flexible Metal Conduit Assembly

015127555
CA00884-5G5WK9W00701: RNCC: 3 | RNVC: 2
CA00884-5G5WK9W00701: RNCC: 5 | RNVC: 9
BACC24D-AP00701: RNCC: D | RNVC: 9

9 Sep 2003

5975-01-512-7873
Flexible Metal Conduit Assembly

015127873
CA00884-2A2WH3N00642: RNCC: 3 | RNVC: 2
CA00884-2A2WH3N00642: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-6722
Electronic Equipment Mounting Tray

015136722
12005-1922-01: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-01-515-2004
Electrical Conduit Adapter

015152004
3362861: RNCC: 3 | RNVC: 2
3362861: RNCC: 3 | RNVC: 9
CF-12: RNCC: 5 | RNVC: 2

18 Nov 2003

5975-01-518-3284
Electronic Equipment Mounting Tray

015183284
7593368: RNCC: 3 | RNVC: 2
EMD0001099: RNCC: 5 | RNVC: 2
PSC0000000157: RNCC: 5 | RNVC: 9
233-500: RNCC: 5 | RNVC: 9

9 Mar 2004

5975-01-518-8281
Electrical Equipment Leg

015188281
CD-3647: RNCC: 3 | RNVC: 2
CD-3647: RNCC: 5 | RNVC: 2
3647: RNCC: 5 | RNVC: 9
D3647-3: RNCC: 5 | RNVC: 9
CD-3647: RNCC: 5 | RNVC: 9

24 Mar 2004

5975-01-527-8366
Blank Panel

015278366
1492-EB10: RNCC: 3 | RNVC: 2

18 Feb 2005

5975-01-528-4089
Flexible Nonmetallic Conduit

015284089
655493N001: RNCC: 3 | RNVC: 2
717701071-004: RNCC: 5 | RNVC: 9
717701071-004: RNCC: 5 | RNVC: 9

11 Mar 2005

5975-01-528-9449
Electrical-Electronic Equipment Panel

015289449
5749063-033: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-529-2274
Transmission Line Grounding Set

015292274
ECLX210M: RNCC: 3 | RNVC: 2
LX210M: RNCC: 5 | RNVC: 9
ECLX210M: RNCC: 5 | RNVC: 9

8 Apr 2005

5975-01-530-0770
Electrical Conduit Coupling

015300770
CC-NPT-34-B: RNCC: 3 | RNVC: 2
H006740: RNCC: 7 | RNVC: 2

13 May 2005

5975-01-532-1402
Electrical Components Tie Down Strap

015321402
156-6175: RNCC: 3 | RNVC: 2

29 Jul 2005

5975-01-532-2922
Strain Electrical Conductor Clamp

015322922
30-302-3D26G20: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-532-6596
Electrical Tie Down Mounting Base

015326596
ABM3H-AT-T0: RNCC: 3 | RNVC: 2
7582K13: RNCC: 5 | RNVC: 9

16 Aug 2005

5975-01-533-0476
Electrical Conductor Bushing

015330476
512-0146: RNCC: 3 | RNVC: 2
6515NAB-500 ITEM 33: RNCC: 5 | RNVC: 2

29 Aug 2005

5975-01-533-1350
Electrical-Electronic Equipment Panel

015331350
CCHA41959-1: RNCC: 3 | RNVC: 2

1 Sep 2005

5975-01-534-0068
Nonmetallic Raceway

015340068
A479990100: RNCC: 3 | RNVC: 2
A47999.0100: RNCC: 5 | RNVC: 2
CV187338: RNCC: 5 | RNVC: 2
A47999.0100: RNCC: 5 | RNVC: 2

4 Oct 2005

5975-01-534-6992
Electrical Components Tie Down Strap

015346992
T50R0C2: RNCC: 3 | RNVC: 2
VA-09-0238-03: RNCC: 5 | RNVC: 2

31 Oct 2005

5975-01-534-6602
Electrical Equipment Drawer

015346602
3654AS708-1: RNCC: 3 | RNVC: 2
3654AS708-1: RNCC: 5 | RNVC: 2
3654AS708: RNCC: D | RNVC: 9

28 Oct 2005

5975-01-536-4524
Flexible Metal Conduit Assembly

015364524
23A02863-50: RNCC: 3 | RNVC: 2

5 Jan 2006

5975-01-537-3355
Cable Marker Sleeve

015373355
HT-SCE-1K-1/2-2.0-0: RNCC: 3 | RNVC: 2

2 Feb 2006

5975-01-537-3363
Cable Marker Sleeve

015373363
SS7074-2296: RNCC: 3 | RNVC: 2

2 Feb 2006

5975-01-538-4109
Electrical Box Connector

015384109
LEVITON 2713: RNCC: 3 | RNVC: 9

21 Mar 2006

5975-01-538-6622
Cable Marker Sleeve

015386622
HM029-067-3: RNCC: 3 | RNVC: 2

28 Mar 2006

5975-01-538-7852
Rigid Metal Conduit Assembly

015387852
23A02829-2: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-540-7683
Junction Box

015407683
A-SG4X4X4NK: RNCC: 3 | RNVC: 2
12443545: RNCC: 7 | RNVC: 2

1 Jun 2006

5975-01-541-0776
Electrical-Electronic Equipment Panel

015410776
2670-0001-09-1: RNCC: 3 | RNVC: 2
2670-0001-09-1: RNCC: 5 | RNVC: 2
2670-0001-09-1: RNCC: 5 | RNVC: 2
2670-0001-09-1: RNCC: 5 | RNVC: 2

14 Jun 2006

5975-01-540-7470
Raceway Cover

015407470
G3000CE: RNCC: 3 | RNVC: 1
12423636-004: RNCC: 5 | RNVC: 2
12423636-004: RNCC: 5 | RNVC: 2
12423636-004: RNCC: 7 | RNVC: 2
12423636: RNCC: D | RNVC: 9

1 Jun 2006

5975-01-543-9023
Electronic Equipment Mounting Tray

015439023
901-175-345-101: RNCC: 1 | RNVC: 2
901-175-345-101: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-545-4948
Strain Electrical Conductor Clamp

015454948
30-302-1D03J16: RNCC: 3 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2

15 Nov 2006

5975-01-545-8803
Electrical-Electronic Equipment Chassis

015458803
30117-1301-01: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-546-6544
Rigid Metal Conduit

015466544
005515-01: RNCC: 3 | RNVC: 2

22 Dec 2006

5975-01-546-9036
Cable Marker Sleeve

015469036
TMS-CCUV-SLEEVE-2-X-65MM: RNCC: 3 | RNVC: 2

8 Jan 2007

5975-01-549-1857
Electrical-Electronic Equipment Chassis

015491857
A60-STIFF-2250: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-2444
Electrical-Electronic Equipment Chassis

015492444
A60-STFF-2250B: RNCC: 3 | RNVC: 2
A60-STIFF-2250B: RNCC: 5 | RNVC: 9

15 Mar 2007

5975-01-549-3951
Electrical Tie Down Mounting Base

015493951
276016-1: RNCC: 3 | RNVC: 2

20 Mar 2007

5975-01-549-7960
Ground Rod

015497960
86391-004: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-482-7045
Electrical Grounding Plate

014827045
901-011-258-101: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-464-9138
Electrical Cable Nipple

014649138
220N3V14: RNCC: 3 | RNVC: 2
9325C08-1409-05: RNCC: 5 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

13 May 1999

5975-01-463-6531
Flexible Metal Conduit Assembly

014636531
5909558-12: RNCC: 3 | RNVC: 2

30 Mar 1999

5975-01-466-2685
Electrical Grounding Plate

014662685
G555571-2: RNCC: 3 | RNVC: 2
G555571-2: RNCC: 5 | RNVC: 2
G555571-2: RNCC: 5 | RNVC: 9

13 Jul 1999

5975-01-466-3298
Electrical Equipment Mounting Base

014663298
94077-1: RNCC: 3 | RNVC: 2
94077-1: RNCC: 5 | RNVC: 9
94077-1: RNCC: C | RNVC: 1

15 Jul 1999

5975-01-466-8120
Junction Box

014668120
A12106NFSS: RNCC: 3 | RNVC: 2

3 Aug 1999

5975-01-467-6588
Electrical Conduit Bend

014676588
95-8081: RNCC: 3 | RNVC: 2

9 Sep 1999

5975-01-469-0529
Electrical Cable Protector

014690529
CPEC5X125: RNCC: 3 | RNVC: 9
UG5140-ED-Y: RNCC: 5 | RNVC: 2

1 Nov 1999

5975-01-469-3784
Electrical Cable Protector

014693784
50-107-B10T: RNCC: 3 | RNVC: 2
50-093-A10T: RNCC: 5 | RNVC: 9
50-107-B10T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-469-6586
Electrical Grounding Plate

014696586
739021-13: RNCC: 3 | RNVC: 2

18 Nov 1999

5975-01-470-3135
Electrical Components Tie Down Strap

014703135
70215K53: RNCC: 3 | RNVC: 2

15 Dec 1999

5975-01-470-2512
Electrical Conduit Adapter

014702512
6060-06-061-15: RNCC: 3 | RNVC: 2
C004AA1206A: RNCC: 5 | RNVC: 2

13 Dec 1999

5975-01-471-3494
Electrical Tie Down Mounting Base

014713494
HS6005G3N12: RNCC: 3 | RNVC: 2
CB4020G3N12: RNCC: 5 | RNVC: 2
HS6005: RNCC: D | RNVC: 9

1 Feb 2000

5975-01-471-8480
Strain Electrical Conductor Clamp

014718480
30-302-2D06J17: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8573
Strain Electrical Conductor Clamp

014718573
30-302-2D04J16: RNCC: 3 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8716
Strain Electrical Conductor Clamp

014718716
30-302-3D16G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8841
Strain Electrical Conductor Clamp

014718841
30-302-3D10G10: RNCC: 3 | RNVC: 2
BACC10KP3D1010N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-9491
Strain Electrical Conductor Clamp

014719491
30-302-2D07G06: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0180
Strain Electrical Conductor Clamp

014720180
30-302-2D06G08: RNCC: 1 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0189
Strain Electrical Conductor Clamp

014720189
30-302-2D05G10: RNCC: 3 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0201
Strain Electrical Conductor Clamp

014720201
30-302-2D10G20: RNCC: 1 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0444
Strain Electrical Conductor Clamp

014720444
30-302-1C03J11: RNCC: 3 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0843
Strain Electrical Conductor Clamp

014720843
30-302-2D16G05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0787
Strain Electrical Conductor Clamp

014720787
30-302-2D04G12: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-473-4198
Electrical-Electronic Equipment Panel

014734198
HM022-131-11: RNCC: 3 | RNVC: 2

7 Apr 2000

5975-01-474-9253
Junction Box

014749253
6-176-100081: RNCC: 3 | RNVC: 2

17 May 2000

5975-01-477-6304
Electrical-Electronic Equipment Panel

014776304
7086002061: RNCC: 3 | RNVC: 2

14 Aug 2000

5975-01-478-5121
Flexible Nonmetallic Conduit

014785121
120-001-16: RNCC: 3 | RNVC: 2
GS830BM5: RNCC: 5 | RNVC: 1
RT1150 CONVOLEX .50: RNCC: 5 | RNVC: 2
RT48 CONVOLEX .50: RNCC: 5 | RNVC: 9
GS830BM: RNCC: D | RNVC: 9

15 Sep 2000

5975-01-480-6930
Electrical Equipment Mounting Base

014806930
RF-384VM-03: RNCC: 3 | RNVC: 2
RF-384VM-03: RNCC: 3 | RNVC: 9
RF-384VM-03: RNCC: 5 | RNVC: 2

1 Dec 2000

5975-01-480-9146
Electrical Components Tie Down Strap

014809146
PLT.6SM-C: RNCC: 3 | RNVC: 2
PLT.6SM-C: RNCC: 5 | RNVC: 2
859-0539: RNCC: 5 | RNVC: 2
1296958: RNCC: 5 | RNVC: 2
686-903-9001: RNCC: 5 | RNVC: 2

11 Dec 2000

5975-01-481-5797
Electrical Tie Down Mounting Base

014815797
TC5828: RNCC: 3 | RNVC: 2

16 Jan 2001

5975-01-481-7383
Guide Rail

014817383
A35609.0100: RNCC: 3 | RNVC: 2

23 Jan 2001

5975-01-484-2934
Electrical Box Connector

014842934
SHC-1038: RNCC: 3 | RNVC: 2
SHC-1038: RNCC: 5 | RNVC: 9

25 Apr 2001

5975-01-484-3406
Flexible Nonmetallic Conduit

014843406
POLY 1/2-BOXED-GRAY: RNCC: 3 | RNVC: 2
PLS-1/2: RNCC: 5 | RNVC: 9
160K0754-6: RNCC: C | RNVC: 1

26 Apr 2001

5975-01-484-7707
Electrical Nonmetallic Conduit Assembly

014847707
251576: RNCC: 3 | RNVC: 2
4B69141-151A: RNCC: 5 | RNVC: 2
4B69141: RNCC: D | RNVC: 9

8 May 2001

5975-01-485-7717
Rigid Metal Conduit Assembly

014857717
23A02336-40: RNCC: 3 | RNVC: 2
93160170: RNCC: 5 | RNVC: 1
3260AS405: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7919
Rigid Metal Conduit Assembly

014857919
3260AS426: RNCC: 3 | RNVC: 2
93160186: RNCC: 5 | RNVC: 2
23A02336-58: RNCC: 5 | RNVC: 9
3260AS426: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7929
Rigid Metal Conduit Assembly

014857929
23A02336-91: RNCC: 3 | RNVC: 2
3260AS672: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-487-8167
Metallic Raceway Assembly

014878167
12250339-2: RNCC: 3 | RNVC: 2
12250339: RNCC: D | RNVC: 9

20 Aug 2001

5975-01-487-8578
Metallic Raceway Assembly

014878578
12296434: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-0396
Junction Box Cover

014870396
5101-0: RNCC: 3 | RNVC: 2
7219K3: RNCC: 5 | RNVC: 2

23 Jul 2001

5975-01-490-4409
Electrical Conduit Elbow

014904409
420AA001N2003: RNCC: 3 | RNVC: 2

27 Sep 2001

5975-01-490-7385
Electrical Conduit Adapter

014907385
SE23FM6704-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

5 Oct 2001

5975-01-493-6112
Electrical Components Tie Down Strap

014936112
8HB271: RNCC: 3 | RNVC: 2
8HB271: RNCC: 3 | RNVC: 9
580871: RNCC: 5 | RNVC: 9

11 Jan 2002

5975-01-493-6867
Electrical Equipment Drawer

014936867
160-640-1: RNCC: 3 | RNVC: 2
151-496: RNCC: 5 | RNVC: 2

15 Jan 2002

5975-01-491-3059
Stuffing Tube Adapter

014913059
22065-407: RNCC: 3 | RNVC: 2
22065: RNCC: D | RNVC: 9

17 Oct 2001

5975-01-494-9704
Electrical Cable Nipple

014949704
216E2V02: RNCC: 3 | RNVC: 2
12422733-002: RNCC: 3 | RNVC: 2
214EV01: RNCC: 5 | RNVC: 9
214EV01: RNCC: 5 | RNVC: 9
216E2V02: RNCC: 5 | RNVC: 9
12422733: RNCC: D | RNVC: 9

1 Mar 2002

5975-01-495-2513
Electrical Equipment Mounting Base

014952513
12422694: RNCC: 3 | RNVC: 2
12422694: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-495-0318
Flexible Nonmetallic Conduit

014950318
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1007: RNCC: 3 | RNVC: 2
M81914/4-1007: RNCC: 5 | RNVC: 9
M81914/4-1007: RNCC: 5 | RNVC: 9
M81914/4-1207: RNCC: 5 | RNVC: 9

5 Mar 2002

5975-01-495-2939
Electrical Conduit Adapter

014952939
711HS078NF1928-4: RNCC: 3 | RNVC: 2
711-078: RNCC: D | RNVC: 9

12 Mar 2002

5975-01-496-7921
Electrical Nonmetallic Conduit Assembly

014967921
R58HB16G51W084D: RNCC: 3 | RNVC: 1
R58HB16G51W084D: RNCC: 5 | RNVC: 1
R58HB16G51W084D: RNCC: 5 | RNVC: 1
R58HB16G51W084D: RNCC: 5 | RNVC: 9

26 Apr 2002

5975-01-497-1501
Ground Rod

014971501
S583ST: RNCC: 3 | RNVC: 2
99002C8008-6: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

10 May 2002

5975-01-499-5905
Electrical-Electronic Equipment Chassis

014995905
802025205112-1: RNCC: 3 | RNVC: 2
802025205112: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-498-9406
Electrical Cable Protector

014989406
810946-1: RNCC: 3 | RNVC: 2

8 Jul 2002

5975-01-500-4756
Rigid Nonmetallic Conduit

015004756
955-145-01-CONDUIT: RNCC: 3 | RNVC: 2
955145-01: RNCC: 5 | RNVC: 9

27 Aug 2002

5975-01-500-8749
Electrical Equipment Mounting Base

015008749
10372-0870-02: RNCC: 3 | RNVC: 2
RF-5211VSM: RNCC: 5 | RNVC: 9

13 Sep 2002

5975-01-507-6546
Tiedo Mounting Base

015076546
CB4020G5N8: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-499-9458
Rigid Metal Conduit

014999458
96207-03811-101: RNCC: 3 | RNVC: 2
IT-5675-101: RNCC: 5 | RNVC: 9
301181-101: RNCC: 5 | RNVC: 9
96207-03811: RNCC: D | RNVC: 9

8 Aug 2002

5975-01-509-8123
Rigid Metal Conduit Assembly

015098123
23A02863-15: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-510-5756
Electrical Equipment Rack

015105756
6ES7-390-1AJ30-0AA0: RNCC: 3 | RNVC: 2
40358AA ITEM 30: RNCC: 5 | RNVC: 9

23 Jul 2003

5975-01-512-7790
Flexible Metal Conduit Assembly

015127790
CA00884-4A4WD3W00422: RNCC: 3 | RNVC: 2
CA00884-4A4WD00422: RNCC: 3 | RNVC: 2
CA00884-4A4WD00422: RNCC: 5 | RNVC: 9
CA00884-4A4WD3W00422: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-517-5237
Electrical-Electronic Equipment Chassis

015175237
1200290L1: RNCC: 3 | RNVC: 2

10 Feb 2004

5975-01-519-8736
Electrical-Electronic Equipment Chassis

015198736
519335-801: RNCC: 3 | RNVC: 2

5 May 2004

5975-01-518-2509
Electrical-Electronic Equipment Panel

015182509
675-23304-2: RNCC: 3 | RNVC: 2

5 Mar 2004

5975-01-523-2379
Extension Reel Mounting Connection Kit

015232379
K056008: RNCC: 3 | RNVC: 2

25 Aug 2004

5975-01-523-8832
Electrical Conduit Adapter

015238832
713AL100NF32132: RNCC: 3 | RNVC: 2

17 Sep 2004

5975-01-528-4881
Grounding Kit

015284881
99411399: RNCC: 3 | RNVC: 2
24KP302: RNCC: 5 | RNVC: 2
24KP302: RNCC: 5 | RNVC: 9

15 Mar 2005

5975-01-528-9269
Electrical-Electronic Equipment Panel

015289269
438-5749760-049: RNCC: 3 | RNVC: 2
5749760-049: RNCC: 5 | RNVC: 9

29 Mar 2005

5975-01-530-8530
Flexible Metal Conduit

015308530
M24758-C: RNCC: 2 | RNVC: 2
MIL-C-24758/5: RNCC: 4 | RNVC: 1
MIL-PRF-24758A: RNCC: 5 | RNVC: 1
M24758/5-06-A: RNCC: 5 | RNVC: 9
MIL-C-24758: RNCC: 5 | RNVC: 9

14 Jun 2005

5975-01-531-1131
Electrical-Electronic Equipment Chassis

015311131
TBX500BKRME-R: RNCC: 3 | RNVC: 2
TBX500BKRME: RNCC: 5 | RNVC: 9
9000703-101 ITEM # 74: RNCC: 5 | RNVC: 9
PL9000705-105 ITEM # 74: RNCC: 5 | RNVC: 9
9000705-103 ITEM # 74: RNCC: 5 | RNVC: 9
9000705-104 ITEM # 74: RNCC: 5 | RNVC: 9
9000703-100 ITEM # 74: RNCC: 5 | RNVC: 9

23 Jun 2005

5975-01-532-0779
Electrical-Electronic Equipment Chassis

015320779
7192067-000: RNCC: 3 | RNVC: 2
7192067-00: RNCC: 5 | RNVC: 9

27 Jul 2005

5975-01-533-1544
Flexible Nonmetallic Conduit

015331544
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1101B: RNCC: 3 | RNVC: 2
M81914/5-1101-BLK: RNCC: 3 | RNVC: 9
SAE AMS-T-81914/5: RNCC: 5 | RNVC: 1
IR-97046: RNCC: 5 | RNVC: 2
M81914/5-1101-0: RNCC: 5 | RNVC: 2
SAE AMS-T-81914/5: RNCC: 5 | RNVC: 9
M81914/5-1101-BLK: RNCC: 5 | RNVC: 9
M81914/5-1101-0: RNCC: 5 | RNVC: 9

2 Sep 2005

5975-01-533-3639
Electrical Conduit Elbow

015333639
4Q-950: RNCC: 3 | RNVC: 2
4Q-950: RNCC: 3 | RNVC: 9

13 Sep 2005

5975-01-534-3366
Junction Box Cover

015343366
9080LB32: RNCC: 3 | RNVC: 2
3000169-001: RNCC: 5 | RNVC: 2
2001733 REV J ITEM 33: RNCC: 5 | RNVC: 2
2001733 REV J ITEM 33: RNCC: 5 | RNVC: 9
3000169-001: RNCC: 5 | RNVC: 9
2001733: RNCC: D | RNVC: 9

18 Oct 2005

5975-01-533-7552
Conduit Outlet

015337552
4G14049-104C: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-01-534-5876
Electrical Conduit Adapter

015345876
TX40AB00-1610H: RNCC: 3 | RNVC: 2

26 Oct 2005

5975-01-534-7862
Electrical Nonmetallic Conduit Assembly

015347862
EXLK-310: RNCC: 3 | RNVC: 2
ECLK-310: RNCC: 5 | RNVC: 2
4SE00442-1-10: RNCC: 5 | RNVC: 9
EXLK-310: RNCC: 5 | RNVC: 9

2 Nov 2005

5975-01-534-7921
Blank Panel

015347921
XPN-0719-A: RNCC: 3 | RNVC: 2
PNA-7: RNCC: 3 | RNVC: 9
441140: RNCC: 5 | RNVC: 2

2 Nov 2005

5975-01-536-1791
Electrical-Electronic Equipment Chassis

015361791
531R581H01: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-6888
Static Ground Reel

015366888
ML-2930-55: RNCC: 3 | RNVC: 2
ML-2930-55: RNCC: 3 | RNVC: 2

11 Jan 2006

5975-01-540-0805
Metallic Raceway

015400805
G410B: RNCC: 3 | RNVC: 2
12423632: RNCC: 5 | RNVC: 9
12423632: RNCC: 5 | RNVC: 9
14243632: RNCC: 7 | RNVC: 2

9 May 2006

5975-01-539-4904
Electrical Equipment Mounting Base

015394904
74A801682-2003: RNCC: 3 | RNVC: 2
74A800682-2009: RNCC: 5 | RNVC: 9

24 Apr 2006

5975-01-540-2982
Nonmetallic Raceway Assembly

015402982
A479980200: RNCC: 3 | RNVC: 2
A47998.0200: RNCC: 5 | RNVC: 2
CV187336: RNCC: 5 | RNVC: 2
A47998.0200: RNCC: 5 | RNVC: 2

15 May 2006

5975-01-540-7591
Metallic Raceway

015407591
G4000D: RNCC: 3 | RNVC: 1
12423630: RNCC: 7 | RNVC: 2

1 Jun 2006

5975-01-540-8726
Junction Box

015408726
CU347-G: RNCC: 3 | RNVC: 2
0212523 NOTE 7: RNCC: 5 | RNVC: 2

7 Jun 2006

5975-01-543-9011
Strain Electrical Conductor Clamp

015439011
30-302-2C08G10: RNCC: 1 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-546-4554
Cathode Orifice Ay

015464554
8059-G503: RNCC: 3 | RNVC: 2
LL-H61-9729: RNCC: 5 | RNVC: 1
7465-10: RNCC: 5 | RNVC: 2
7465C-10: RNCC: 5 | RNVC: 2
7465-ITEM NO 10: RNCC: 5 | RNVC: 9

18 Dec 2006

5975-01-548-2314
Stuffing Tube

015482314
HJ1058BPK25: RNCC: 3 | RNVC: 2

14 Feb 2007

5975-01-462-7321
Stuffing Tube

014627321
1990.9 SIZE A TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269-149: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-464-0844
Electrical-Electronic Equipment Panel

014640844
406865-01: RNCC: 3 | RNVC: 2
406865-01: RNCC: 3 | RNVC: 2

15 Apr 1999

5975-01-464-8580
Flexible Nonmetallic Conduit

014648580
CL-516: RNCC: 3 | RNVC: 2
9325C08-3137-01: RNCC: 5 | RNVC: 2

12 May 1999

5975-01-464-8681
Flexible Metal Conduit

014648681
7127K68: RNCC: 3 | RNVC: 2
7127K68: RNCC: 5 | RNVC: 1
9325C08-3023-02: RNCC: 7 | RNVC: 1
9325C08-3023: RNCC: D | RNVC: 9

12 May 1999

5975-01-464-9123
Electrical Cable Nipple

014649123
220N3V02: RNCC: 3 | RNVC: 2
40011828: RNCC: 5 | RNVC: 2
9325C08-1409-04: RNCC: 5 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

13 May 1999

5975-01-464-9164
Electrical Box Connector

014649164
7119K73: RNCC: 3 | RNVC: 2
7119K73: RNCC: 5 | RNVC: 2
9325C08-3022-02: RNCC: 7 | RNVC: 2
64-0262: RNCC: C | RNVC: 1
9325C08-3022: RNCC: D | RNVC: 9

13 May 1999

5975-01-466-7336
Junction Box

014667336
37236-2051-1: RNCC: 3 | RNVC: 2
47236-1005-101 ITEM 1: RNCC: 5 | RNVC: 2

29 Jul 1999

5975-01-471-8477
Strain Electrical Conductor Clamp

014718477
30-302-2D06J04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8492
Strain Electrical Conductor Clamp

014718492
30-302-2D17J06: RNCC: 3 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8498
Strain Electrical Conductor Clamp

014718498
30-302-2D14J05: RNCC: 3 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8509
Strain Electrical Conductor Clamp

014718509
30-302-2D05J14: RNCC: 3 | RNVC: 2
30-302-2D05J14: RNCC: 3 | RNVC: 2
30-302-2D05J14: RNCC: 3 | RNVC: 2
30-302-2D05J14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8577
Strain Electrical Conductor Clamp

014718577
30-302-2D11J04: RNCC: 3 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0176
Strain Electrical Conductor Clamp

014720176
30-302-2D06G12: RNCC: 3 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0336
Strain Electrical Conductor Clamp

014720336
30-302-2D07G07: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0220
Strain Electrical Conductor Clamp

014720220
30-302-2D04G11: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0807
Strain Electrical Conductor Clamp

014720807
30-302-2D07G10: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-9370
Electrical Tie Down Mounting Base

014729370
CB3019A3N: RNCC: 3 | RNVC: 2
CB3019: RNCC: D | RNVC: 9

22 Mar 2000

5975-01-474-2751
Electrical Tie Down Mounting Base

014742751
HS5837AA3N: RNCC: 3 | RNVC: 2

28 Apr 2000

5975-01-478-7584
Electrical Components Tie Down Strap

014787584
96-9129: RNCC: 3 | RNVC: 2
96-9129: RNCC: 3 | RNVC: 9
31025083: RNCC: 5 | RNVC: 9

26 Sep 2000

5975-01-481-1260
Electrical Box Connector

014811260
AA50553-1-2-L-2-03-A: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1

19 Dec 2000

5975-01-483-3188
Electronic Equipment Mounting Tray

014833188
34200575-013: RNCC: 3 | RNVC: 2

23 Mar 2001

5975-01-482-0543
Electrical Wall Plate

014820543
5148-0: RNCC: 3 | RNVC: 2
62206-1: RNCC: 5 | RNVC: 1
62206-1: RNCC: 5 | RNVC: 9
WR281C: RNCC: 5 | RNVC: 9
WC2AV: RNCC: 5 | RNVC: 9
5148-0: RNCC: 5 | RNVC: 9
602206: RNCC: D | RNVC: 9

7 Feb 2001

5975-01-483-0843
Junction Box

014830843
12463101: RNCC: 3 | RNVC: 2

15 Mar 2001

5975-01-485-7723
Rigid Metal Conduit Assembly

014857723
23A02336-50: RNCC: 3 | RNVC: 2
93160179: RNCC: 5 | RNVC: 1
3260AS417: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7726
Rigid Metal Conduit Assembly

014857726
23A02336-56: RNCC: 3 | RNVC: 2
93160184: RNCC: 5 | RNVC: 2
3260AS424: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7950
Rigid Metal Conduit Assembly

014857950
3260AS373: RNCC: 1 | RNVC: 2
23A02336-11: RNCC: 3 | RNVC: 2
93160146: RNCC: 5 | RNVC: 2

7 Jun 2001

5975-01-491-3435
Stuffing Tube

014913435
22145: RNCC: 3 | RNVC: 2
22145: RNCC: 5 | RNVC: 2

18 Oct 2001

5975-01-493-6962
Electrical Mounting Offset

014936962
1631154-1: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-01-494-3163
Electrical Conduit Tee

014943163
5014618: RNCC: 3 | RNVC: 2
PT9333: RNCC: 3 | RNVC: 9

7 Feb 2002

5975-01-496-5191
Electrical Cable Protector

014965191
CP2X325: RNCC: 3 | RNVC: 9
MG2300-ORG/YEL: RNCC: 5 | RNVC: 2

18 Apr 2002

5975-01-496-7924
Electrical Nonmetallic Conduit Assembly

014967924
R58HB02B34W024: RNCC: 3 | RNVC: 2
R58HB02B34W024: RNCC: 5 | RNVC: 2
R58HB02B34W024: RNCC: 5 | RNVC: 2
R58HB02B34W024: RNCC: 5 | RNVC: 9
R58HB02B34W024: RNCC: 7 | RNVC: 2

26 Apr 2002

5975-01-497-0117
Cable Strain Relief Bushing

014970117
69915K51: RNCC: 3 | RNVC: 2

6 May 2002

5975-01-497-1493
Ground Rod Section

014971493
S583DT: RNCC: 3 | RNVC: 2
99002C8008: RNCC: 7 | RNVC: 1
99002C8008-5: RNCC: 7 | RNVC: 2

10 May 2002

5975-01-497-5628
Electrical Conduit Adapter

014975628
319HS001NF0902-6: RNCC: 3 | RNVC: 2

23 May 2002

5975-01-500-0254
Flexible Nonmetallic Conduit

015000254
HCTE1500-0: RNCC: 3 | RNVC: 2

12 Aug 2002

5975-01-500-8183
Electrical Conduit Elbow

015008183
74A580703-1005: RNCC: 3 | RNVC: 2

12 Sep 2002

5975-01-495-2413
Electrical Equipment Mounting Base

014952413
12422688: RNCC: 3 | RNVC: 2
12422688: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-503-1819
Electrical Equipment Mounting Base

015031819
071-04047-0000: RNCC: 3 | RNVC: 9
VC-401B: RNCC: 5 | RNVC: 9

6 Dec 2002

5975-01-504-5475
Electrical Equipment Mounting Base

015045475
200-85317-102: RNCC: 3 | RNVC: 2
247-1026-020: RNCC: 5 | RNVC: 1
MT6-8371-101: RNCC: 5 | RNVC: 1
247-1026: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-504-6712
Electronic Equipment Mounting Tray

015046712
901-370-345-273: RNCC: 3 | RNVC: 2
901-370-345-273: RNCC: 5 | RNVC: 2

6 Feb 2003

5975-01-506-9600
Cable Hanger

015069600
9M-10: RNCC: 3 | RNVC: 2
6512E17FN86: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-508-8276
Electronic Equipment Mounting Tray

015088276
212A686-1: RNCC: 3 | RNVC: 2
212A686: RNCC: D | RNVC: 9

4 Jun 2003

5975-01-509-8112
Rigid Metal Conduit Assembly

015098112
23A02881-4: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-511-4447
Flexible Nonmetallic Conduit

015114447
120-117-40-100: RNCC: 3 | RNVC: 9
120-117-40: RNCC: 5 | RNVC: 9
120-117: RNCC: D | RNVC: 9

8 Aug 2003

5975-01-512-4825
Electrical Conduit Ferrule

015124825
4B69010-101A: RNCC: 3 | RNVC: 2

2 Sep 2003

5975-01-512-7859
Flexible Metal Conduit Assembly

015127859
CA00884-2A2WP3N00800: RNCC: 3 | RNVC: 2
CA00884-2A2WP3N00800: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-3523
Tiedo Mounting Base

015133523
CB4019C3N: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-512-7945
Flexible Metal Conduit Assembly

015127945
CA00884-2A2WH3N00283: RNCC: 3 | RNVC: 2
CA00884-2A2WH3N00282: RNCC: 5 | RNVC: 9
CA00884-2A2WH3N00283: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-4557
Electrical Components Tie Down Strap

015134557
T50L-OHS: RNCC: 3 | RNVC: 2
291207C1: RNCC: 5 | RNVC: 2
291207C1: RNCC: 5 | RNVC: 9
50L-0HS: RNCC: 5 | RNVC: 9
PT08-28991: RNCC: D | RNVC: 9

25 Sep 2003

5975-01-514-3485
Electronic Equipment Mounting Tray

015143485
726937-801: RNCC: 3 | RNVC: 2
MXF-366: RNCC: 5 | RNVC: 2

23 Oct 2003

5975-01-518-2865
Electrical Nonmetallic Conduit Assembly

015182865
2046AS072-74: RNCC: 3 | RNVC: 2
23A01845-074: RNCC: 5 | RNVC: 2
740NF110NFH251I09-09-82: RNCC: 5 | RNVC: 9
23A01845-074: RNCC: 5 | RNVC: 9
740NF110NF251T09-09-82: RNCC: 5 | RNVC: 9
740NF110NFH251T09-09-82: RNCC: C | RNVC: 1
749-083-5: RNCC: D | RNVC: 9

8 Mar 2004

5975-01-519-7794
Electrical Box Connector

015197794
2335801: RNCC: 3 | RNVC: 2

30 Apr 2004

5975-01-519-8006
Electrical Components Tie Down Strap

015198006
7130K41: RNCC: 3 | RNVC: 2

30 Apr 2004

5975-01-520-5257
Interconnecting Box

015205257
380-5921: RNCC: 3 | RNVC: 2
15012543: RNCC: 5 | RNVC: 2
4KK570: RNCC: 5 | RNVC: 2
370-3282: RNCC: 5 | RNVC: 2
4KK570: RNCC: 5 | RNVC: 9
370-3282: RNCC: 5 | RNVC: 9

14 May 2004

5975-01-522-0910
Flexible Metal Conduit

015220910
LQC3/8: RNCC: 3 | RNVC: 2

19 Jul 2004

5975-01-522-5940
Rigid Metal Conduit Assembly

015225940
23A02863-31: RNCC: 3 | RNVC: 2

5 Aug 2004

5975-01-521-8030
Junction Box

015218030
250-028908-10: RNCC: 3 | RNVC: 2

6 Jul 2004

5975-01-526-2923
Stuffing Tube Plug

015262923
05098100: RNCC: 3 | RNVC: 2

14 Dec 2004

5975-01-527-8732
Electrical Equipment Mounting Base

015278732
13589470: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-528-9506
Electrical-Electronic Equipment Panel

015289506
5749760-063: RNCC: 3 | RNVC: 2
95-1719-7: RNCC: 5 | RNVC: 2

30 Mar 2005

5975-01-529-1542
Metallic Raceway Assembly

015291542
123AB40125-11: RNCC: 3 | RNVC: 2
123AB40125-11: RNCC: 5 | RNVC: 9
123AB40125-11: RNCC: 5 | RNVC: 9

6 Apr 2005

5975-01-529-9461
Electronic Equipment Mounting Tray

015299461
9000694-1: RNCC: 1 | RNVC: 2
AH2000: RNCC: 3 | RNVC: 2
9000600-101 FIND # 27: RNCC: 5 | RNVC: 2

9 May 2005

5975-01-530-1718
Electrical Conduit Adapter

015301718
711HS078NF2128-4: RNCC: 3 | RNVC: 2
S4270FM7228S-34-4: RNCC: 3 | RNVC: 2
63A155258P93: RNCC: 7 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

17 May 2005

5975-01-531-0600
Electrical Box Connector

015310600
2932: RNCC: 3 | RNVC: 2
2932: RNCC: 5 | RNVC: 9
17-1-6814-1: RNCC: 7 | RNVC: 2
17-1-6814: RNCC: D | RNVC: 9

21 Jun 2005

5975-01-534-1421
Cable Marker Sleeve

015341421
SM12 1/4 WHT: RNCC: 3 | RNVC: 2
LSF00099: RNCC: D | RNVC: 9

11 Oct 2005

5975-01-535-5467
Swing Panel Kit

015355467
A-JCDFK: RNCC: 3 | RNVC: 2

2 Dec 2005

5975-01-536-7749
Electrical Cable Nipple

015367749
BACN18H7: RNCC: 3 | RNVC: 2
SR1010038: RNCC: 5 | RNVC: 2
BACN18H7: RNCC: 5 | RNVC: 9

13 Jan 2006

5975-01-536-8328
Electronic Equipment Mounting Tray

015368328
FXOPT0040: RNCC: 3 | RNVC: 2
401-8175073 SHEET 7: RNCC: 5 | RNVC: 1
401-7583872ITEM48: RNCC: 5 | RNVC: 2
401-8175073 SHEET 9: RNCC: 5 | RNVC: 2
401-8285208 ITEM NO 17: RNCC: 5 | RNVC: 2
141-015-330-00: RNCC: 5 | RNVC: 2

18 Jan 2006

5975-01-538-1877
Junction Box

015381877
E382DE: RNCC: 3 | RNVC: 9
E382DE: RNCC: 5 | RNVC: 2
E382DE: RNCC: 5 | RNVC: 9

14 Mar 2006

5975-01-538-7942
Rigid Metal Conduit Assembly

015387942
23A02829-18: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-540-5504
Electrical Box Connector

015405504
AA50552-00I-1-D-C: RNCC: 2 | RNVC: 2
AA50552: RNCC: 4 | RNVC: 1

23 May 2006

5975-01-541-9168
Cable Marker Sleeve

015419168
TMS-SCE-2.5K-3/16-2.0-9: RNCC: 3 | RNVC: 2
TMS-SCE-F2.5K-3/16-9: RNCC: 3 | RNVC: 9

17 Jul 2006

5975-01-543-9016
Strain Electrical Conductor Clamp

015439016
30-302-2D11G08: RNCC: 1 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-8005
Electrical Components Tie Down Strap

015438005
2042281: RNCC: 3 | RNVC: 2

21 Sep 2006

5975-01-544-8830
Electrical Components Tie Down Strap

015448830
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-2-9: RNCC: 3 | RNVC: 2
AS33671-2-9: RNCC: 3 | RNVC: 9

25 Oct 2006

5975-01-546-9219
Electronic Equipment Mounting Tray

015469219
68A870091-1005: RNCC: 3 | RNVC: 2

9 Jan 2007

5975-01-547-3092
Electrical Components Tie Down Strap

015473092
VRT11M-C: RNCC: 3 | RNVC: 2
20001600: RNCC: D | RNVC: 9

17 Jan 2007

5975-01-548-4348
Electrical Components Tie Down Strap

015484348
AA9500D3656: RNCC: 3 | RNVC: 2

8 Apr 2021

5975-01-549-2083
Electrical Wall Plate

015492083
MP-SW-BASE: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-7543
Electrical Grounding Plate

015497543
10208-0009: RNCC: 3 | RNVC: 2

28 Mar 2007

5975-01-550-1232
Stuffing Tube

015501232
230322010: RNCC: 3 | RNVC: 2
21640.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-499-5912
Electrical-Electronic Equipment Chassis

014995912
802025205104-1: RNCC: 3 | RNVC: 9
802025205104-1: RNCC: 7 | RNVC: 2
802025205104: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-7190
Electrical Equipment Foot

014997190
1421T7: RNCC: 3 | RNVC: 2
802027205217-1: RNCC: 5 | RNVC: 2
1421T7: RNCC: 5 | RNVC: 9
802027205217: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-508-4746
Electrical Components Tie Down Strap

015084746
AL-05-40-9-C: RNCC: 3 | RNVC: 2
7130K13: RNCC: 5 | RNVC: 2

21 May 2003

5975-01-509-8098
Rigid Metal Conduit Assembly

015098098
23A02881-3: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-461-3282
Box Retainer

014613282
634-5775-001: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-01-463-3375
Guide Rail

014633375
9080MH379: RNCC: 3 | RNVC: 2

17 Mar 1999

5975-01-464-8194
Electrical Box Connector

014648194
16205B: RNCC: 3 | RNVC: 2
7119K72: RNCC: 3 | RNVC: 9
0164942: RNCC: 5 | RNVC: 2
LMII: RNCC: 5 | RNVC: 2
7119K72: RNCC: 5 | RNVC: 9
5975PL0932141: RNCC: 6 | RNVC: 9
9325C08-3022-01: RNCC: 7 | RNVC: 2
9325C08-3022: RNCC: D | RNVC: 9

11 May 1999

5975-01-465-0385
Electrical Cable Nipple

014650385
224N3V14: RNCC: 3 | RNVC: 2
9325C08-1409-08: RNCC: 7 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

19 May 1999

5975-01-469-3756
Electrical Cable Protector

014693756
50-107-B08T: RNCC: 3 | RNVC: 2
50-107-B08T: RNCC: 5 | RNVC: 2
50-093-A08T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-469-9320
Electrical Conduit Locknut

014699320
1126646: RNCC: 3 | RNVC: 2
112-6646: RNCC: 5 | RNVC: 2

1 Dec 1999

5975-01-470-2520
Electrical Conduit Adapter

014702520
6430-12-041-15: RNCC: 3 | RNVC: 2

13 Dec 1999

5975-01-471-8479
Strain Electrical Conductor Clamp

014718479
30-302-1D09J03: RNCC: 3 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8544
Strain Electrical Conductor Clamp

014718544
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8600
Strain Electrical Conductor Clamp

014718600
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8613
Electrical Cable Nipple

014718613
1672-0073: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8670
Strain Electrical Conductor Clamp

014718670
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0250
Strain Electrical Conductor Clamp

014720250
30-302-2D06J19: RNCC: 3 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0740
Strain Electrical Conductor Clamp

014720740
30-302-2D17G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-1129
Strain Electrical Conductor Clamp

014721129
30-302-2D05G14: RNCC: 1 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-474-7840
Electrical Equipment Mounting Base

014747840
12987869: RNCC: 3 | RNVC: 2

12 May 2000

5975-01-472-7401
Electrical Conduit Coupling

014727401
16W1195-15: RNCC: 3 | RNVC: 2
16W1195: RNCC: D | RNVC: 9

15 Mar 2000

5975-01-476-8612
Electrical-Electronic Equipment Panel

014768612
733-10074-1: RNCC: 3 | RNVC: 2
733-10074: RNCC: D | RNVC: 9

25 Jul 2000

5975-01-479-0207
Flexible Nonmetallic Conduit

014790207
48-25360-019: RNCC: 3 | RNVC: 2
48-25360-019: RNCC: 5 | RNVC: 2

6 Oct 2000

5975-01-479-2808
Blank Panel

014792808
9333103223: RNCC: 3 | RNVC: 2

17 Oct 2000

5975-01-479-0509
Stuffing Tube

014790509
CG-1250: RNCC: 3 | RNVC: 2
CG-1250: RNCC: 3 | RNVC: 9
A37710-004: RNCC: 5 | RNVC: 2

10 Oct 2000

5975-01-480-1325
Electrical Equipment Mounting Base

014801325
987-0088-001: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-01-480-5396
Electrical Box Connector

014805396
2678: RNCC: 3 | RNVC: 2

27 Nov 2000

5975-01-480-7899
Raceway Cover

014807899
12421507-001: RNCC: 3 | RNVC: 2
12421507-001: RNCC: 5 | RNVC: 2
12421507-001: RNCC: 5 | RNVC: 2
12421507: RNCC: D | RNVC: 9

6 Dec 2000

5975-01-481-2263
Electronic Equipment Mounting Tray

014812263
70157-106: RNCC: 3 | RNVC: 2
MT6-06SL-102B-SL: RNCC: 3 | RNVC: 2
6358-101: RNCC: 3 | RNVC: 2
247-1023-010: RNCC: 7 | RNVC: 1
247-1023: RNCC: D | RNVC: 9

22 Dec 2000

5975-01-485-7712
Rigid Metal Conduit Assembly

014857712
23A02336-88: RNCC: 3 | RNVC: 2
93160250: RNCC: 5 | RNVC: 9
3260AS557: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-8080
Rigid Metal Conduit Assembly

014858080
23A02336-32: RNCC: 3 | RNVC: 2
93160165: RNCC: 5 | RNVC: 1
3260AS397: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-486-7048
Ground Rod

014867048
DS-68: RNCC: 3 | RNVC: 2

12 Jul 2001

5975-01-487-8582
Electrical Components Tie Down Strap

014878582
6-850-100002: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-8719
Metallic Raceway Assembly

014878719
12250238: RNCC: 3 | RNVC: 2

22 Aug 2001

5975-01-491-3061
Stuffing Tube Adapter

014913061
22065-401: RNCC: 3 | RNVC: 2
22065: RNCC: D | RNVC: 9

17 Oct 2001

5975-01-491-3060
Stuffing Tube Adapter

014913060
22065-405: RNCC: 3 | RNVC: 2
22065: RNCC: D | RNVC: 9

17 Oct 2001

5975-01-492-3982
Electrical Equipment Mounting Base

014923982
1049999G-1: RNCC: 3 | RNVC: 2
MT-7221/APX: RNCC: 5 | RNVC: 2

27 Nov 2001

5975-01-494-3147
Electrical Box Connector

014943147
2921AL: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-01-495-7073
Electrical Conduit Wye

014957073
710-106NFA16B12C12: RNCC: 3 | RNVC: 2
63A154731P4: RNCC: 5 | RNVC: 2

22 Mar 2002

5975-01-496-4937
Electrical-Electronic Equipment Panel

014964937
196572-A00: RNCC: 3 | RNVC: 2
196572A: RNCC: 5 | RNVC: 9

17 Apr 2002

5975-01-495-7914
Special Harness

014957914
109871N: RNCC: 3 | RNVC: 2
109871: RNCC: 3 | RNVC: 9

25 Mar 2002

5975-01-496-9673
Cable Marker Sleeve

014969673
HT-SCE-3/4-2.0-9: RNCC: 3 | RNVC: 2

3 May 2002

5975-01-496-9671
Cable Marker Sleeve

014969671
HT-SCE-1/2-2.0-9: RNCC: 3 | RNVC: 2

3 May 2002

5975-01-501-4255
Cable Tie Mount

015014255
CB4019G3N750: RNCC: 3 | RNVC: 2
193527073: RNCC: 5 | RNVC: 2

1 Oct 2002

5975-01-502-3123
Guide Rail

015023123
DCR-1A-12: RNCC: 3 | RNVC: 2
GR803B12: RNCC: 7 | RNVC: 2

31 Oct 2002

5975-01-503-4899
Conduit

015034899
7132751: RNCC: 3 | RNVC: 2
7132751: RNCC: 5 | RNVC: 9

19 Dec 2002

5975-01-503-7178
Electrical Tie Down Mounting Base

015037178
8584018: RNCC: 3 | RNVC: 2
8584018: RNCC: 5 | RNVC: 9

6 Jan 2003

5975-01-504-3958
Electrical-Electronic Equipment Chassis

015043958
816-3462-001: RNCC: 3 | RNVC: 2
816-3462: RNCC: D | RNVC: 9

28 Jan 2003

5975-01-506-0402
Electronic Equipment Mounting Tray

015060402
12005-1920-01: RNCC: 3 | RNVC: 2

21 Mar 2003

5975-01-506-4112
Flexible Nonmetallic Conduit

015064112
2112-4205: RNCC: 3 | RNVC: 2

28 Mar 2003

5975-01-506-4121
Flexible Metal Conduit

015064121
82941: RNCC: 3 | RNVC: 2

28 Mar 2003

5975-01-506-7100
Cable Hanger

015067100
RTD6300: RNCC: 3 | RNVC: 2

8 Apr 2003

5975-01-505-3442
Electrical Conduit Adapter

015053442
710HS002NF1912: RNCC: 3 | RNVC: 2

4 Mar 2003

NSN 5975-01-506-9170 015069170 HANGER,CABLE

5975-01-506-9170
Cable Hanger

015069170
SAMTAN0150: RNCC: 3 | RNVC: 2
6512E17FN79: RNCC: D | RNVC: 9

14 Apr 2003

5975-01-507-7960
Flexible Nonmetallic Conduit

015077960
2112-4206: RNCC: 3 | RNVC: 2

6 May 2003

5975-01-504-5751
Electrical Grounding Plate

015045751
100K591G01: RNCC: 3 | RNVC: 2
100K591: RNCC: D | RNVC: 9

3 Feb 2003

5975-01-509-9832
Electrical Components Tie Down Strap

015099832
AL-14-50-9-C: RNCC: 3 | RNVC: 2
7130K16: RNCC: 5 | RNVC: 2

10 Jul 2003

5975-01-511-7421
Electrical Cable Protector

015117421
CP1X125-GP-DO-B: RNCC: 3 | RNVC: 9

14 Aug 2003

5975-01-512-7939
Flexible Metal Conduit Assembly

015127939
CA00884-2A2WF3N00401: RNCC: 3 | RNVC: 2
CA00884-2A2WF3N00401: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-3747
Tiedo Mounting Base

015133747
CB4019C3N750: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-513-4103
11.5X.185X Tie Wire

015134103
4662065-027: RNCC: 3 | RNVC: 2
4662065-027: RNCC: 3 | RNVC: 9
4662065-027: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-514-3489
Electronic Equipment Mounting Tray

015143489
902663-802: RNCC: 3 | RNVC: 2
902663-801: RNCC: 5 | RNVC: 9
MXF-332: RNCC: 5 | RNVC: 9

23 Oct 2003

5975-01-515-3606
Electrical Conduit Adapter

015153606
S3844-2832-34G: RNCC: 3 | RNVC: 2

21 Nov 2003

5975-01-516-7373
Electrical Equipment Mounting Base

015167373
RF-5870-VM001: RNCC: 3 | RNVC: 2
RF-5870-VM001: RNCC: 5 | RNVC: 2
RF-5870-VM001: RNCC: 5 | RNVC: 9
5975PL1623390: RNCC: 6 | RNVC: 9

16 Jan 2004

5975-01-518-2046
Interconnecting Box

015182046
97-1814GR2: RNCC: 3 | RNVC: 2
97-1808 ITEM 47: RNCC: 5 | RNVC: 2

4 Mar 2004

5975-01-516-5028
Electrical Equipment Mounting Base

015165028
D0011720-1001: RNCC: 3 | RNVC: 2

8 Jan 2004

5975-01-519-6956
Electrical Equipment Mounting Base

015196956
60-190-01: RNCC: 3 | RNVC: 2
60-190-01: RNCC: 3 | RNVC: 9
60-190-01: RNCC: 5 | RNVC: 2
9000702-100 ITEM # 48: RNCC: 5 | RNVC: 2

28 Apr 2004

5975-01-520-4814
Electrical-Electronic Equipment Panel

015204814
406-704-022-121: RNCC: 3 | RNVC: 2

13 May 2004

5975-01-522-0822
Electrical Components Tie Down Strap

015220822
3423005: RNCC: 3 | RNVC: 2
3423005: RNCC: 3 | RNVC: 9
PLB4S-M0: RNCC: 5 | RNVC: 2
T50LDH0M4: RNCC: 5 | RNVC: 2

18 Jul 2004

5975-01-527-7367
Cable Hanger

015277367
101-107-126: RNCC: 3 | RNVC: 2

15 Feb 2005

5975-01-528-9477
Electrical-Electronic Equipment Panel

015289477
5749760-065: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-528-9494
Electrical-Electronic Equipment Panel

015289494
5749760-057: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-529-3903
Interconnecting Box

015293903
11445-101: RNCC: 3 | RNVC: 2
11445-101: RNCC: 3 | RNVC: 9

14 Apr 2005

5975-01-529-6330
Electrical Box Connector

015296330
6V9162: RNCC: 3 | RNVC: 2

25 Apr 2005

5975-01-530-6004
Junction Box

015306004
4B61009-101B: RNCC: 3 | RNVC: 2

6 Jun 2005

5975-01-532-2970
Strain Electrical Conductor Clamp

015322970
30-302-2D09G20: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-532-3380
Electrical-Electronic Equipment Panel

015323380
250-00027CK-P1: RNCC: 3 | RNVC: 2
250-00027CK-CP1: RNCC: 5 | RNVC: 9

4 Aug 2005

5975-01-532-4930
Electrical-Electronic Equipment Chassis

015324930
B504: RNCC: 3 | RNVC: 2
B504: RNCC: 3 | RNVC: 2
7373970-00: RNCC: 5 | RNVC: 2

10 Aug 2005

5975-01-534-1681
Electrical Conduit Adapter

015341681
TX-40-AB00-2418-H: RNCC: 3 | RNVC: 2

11 Oct 2005

5975-01-536-4546
Flexible Metal Conduit Assembly

015364546
23A02863-49: RNCC: 3 | RNVC: 2

5 Jan 2006

5975-01-539-4122
Junction Box

015394122
7390258 FIND R02: RNCC: 3 | RNVC: 2
JBBS-57-E811: RNCC: 3 | RNVC: 2
JBBS-57-E811: RNCC: 5 | RNVC: 2

20 Apr 2006

5975-01-540-8091
Raceway Cover

015408091
12423636-003: RNCC: 3 | RNVC: 1
G3000GE: RNCC: 3 | RNVC: 2
12423636-003: RNCC: 7 | RNVC: 2

5 Jun 2006

5975-01-540-8124
Raceway Cover

015408124
G3000CE: RNCC: 3 | RNVC: 1
12423636-007: RNCC: 5 | RNVC: 2
12423636-007: RNCC: 5 | RNVC: 2
12423636-007: RNCC: 7 | RNVC: 2

5 Jun 2006

5975-01-540-8791
Flexible Nonmetallic Conduit

015408791
3278978: RNCC: 3 | RNVC: 2
3278978: RNCC: 3 | RNVC: 9

7 Jun 2006

5975-01-541-9157
Cable Marker Sleeve

015419157
TMS-SCE-1K-3/4-2.0-9: RNCC: 3 | RNVC: 2
TMS-SCE-F1K-3/4-9: RNCC: 5 | RNVC: 9
TMS-SCE-1K-3/4-2.0.9.: RNCC: 5 | RNVC: 9

17 Jul 2006

5975-01-528-2999
Flexible Nonmetallic Conduit

015282999
717701065-004: RNCC: 3 | RNVC: 2
MAULFLEX-615-SM-288IN: RNCC: 5 | RNVC: 2

9 Mar 2005

5975-01-544-0263
Junction Box Cover

015440263
4B60041-101A: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-01-544-5794
Black End Cap

015445794
PLAENDCAP2020: RNCC: 3 | RNVC: 2

17 Oct 2006

5975-01-545-2986
Electrical Equipment Mounting Base

015452986
A12P10: RNCC: 3 | RNVC: 2
PB410: RNCC: 5 | RNVC: 9
PB140: RNCC: 5 | RNVC: 9

8 Nov 2006

5975-01-545-2614
Cable Strain Relief Bushing

015452614
7807K69: RNCC: 3 | RNVC: 9
CD16N3-BK: RNCC: 5 | RNVC: 2
7807K39: RNCC: 5 | RNVC: 2

7 Nov 2006

5975-01-545-4931
Strain Electrical Conductor Clamp

015454931
30-302-2D11J09: RNCC: 1 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2

15 Nov 2006

5975-01-545-5453
Electrical Components Tie Down Strap

015455453
7130K32: RNCC: 3 | RNVC: 2
7130K32: RNCC: 5 | RNVC: 2

16 Nov 2006

5975-01-547-3090
Electrical Components Tie Down Strap

015473090
VRT101M-C: RNCC: 3 | RNVC: 9
20001600: RNCC: D | RNVC: 9

17 Jan 2007

5975-01-549-2097
Electrical Wall Plate

015492097
MP-SWITCH: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-7690
Electrical Cable Protector

015497690
104A0439: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-549-7716
Electrical Equipment Mounting Base

015497716
104A0354: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-550-1222
Stuffing Tube

015501222
224281406: RNCC: 3 | RNVC: 2
21636.6: RNCC: 5 | RNVC: 9

10 Apr 2007

5975-01-550-4509
Cable Hanger

015504509
7565K49: RNCC: 3 | RNVC: 2
7565K49: RNCC: 5 | RNVC: 2

19 Apr 2007

5975-01-467-9255
Electrical Cable Nipple

014679255
95-8097: RNCC: 3 | RNVC: 2

21 Sep 1999

5975-01-467-9625
Electrical Components Tie Down Strap

014679625
PLT2IC76: RNCC: 3 | RNVC: 2
PLT2I-C76: RNCC: 5 | RNVC: 2
PLT2I-C76: RNCC: 5 | RNVC: 9
12506884: RNCC: D | RNVC: 9

22 Sep 1999

5975-01-465-5957
Electrical Box Connector

014655957
4972NM: RNCC: 3 | RNVC: 2

15 Jun 1999

5975-01-471-1138
Electrical Equipment Mounting Base

014711138
RM3000: RNCC: 3 | RNVC: 2
91796312: RNCC: 5 | RNVC: 2
RM3000: RNCC: 5 | RNVC: 2

24 Jan 2000

Load More Results