What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 86 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 86 of 176

5975-00-280-6744
Flexible Metal Conduit

002806744
7611101P97: RNCC: 3 | RNVC: 2
7614260P36: RNCC: 3 | RNVC: 2
7611101P97: RNCC: 3 | RNVC: 2
7614260P36: RNCC: 3 | RNVC: 2
A4651-8: RNCC: 3 | RNVC: 2
115-20: RNCC: 3 | RNVC: 2
213021-10: RNCC: 3 | RNVC: 2
1-1250: RNCC: 5 | RNVC: 2
1-1250: RNCC: 5 | RNVC: 9
9733-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-701-9446
Electrical Box Connector

017019446
717-509M32: RNCC: 3 | RNVC: 2
STD/0000107938: RNCC: 5 | RNVC: 1
70051835: RNCC: 5 | RNVC: 2

17 Jun 2022

5975-01-699-9279
Electrical Equipment Rack

016999279
ER6202: RNCC: 3 | RNVC: 2

7 Mar 2022

5975-01-700-7727
Flexible Metal Conduit

017007727
750-192-80-N-C-G: RNCC: 3 | RNVC: 2
70051331: RNCC: 5 | RNVC: 2

13 Apr 2022

5975-00-296-6090
Electrical Box Connector

002966090
256: RNCC: 3 | RNVC: 2
7483: RNCC: 3 | RNVC: 2
SP6125: RNCC: 3 | RNVC: 2
2104: RNCC: 5 | RNVC: 2
CU1007-3: RNCC: 5 | RNVC: 2
XC-403: RNCC: 5 | RNVC: 2
D235: RNCC: 5 | RNVC: 9
410: RNCC: 5 | RNVC: 9
1004: RNCC: 5 | RNVC: 9
24-100: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-317-3116
Electrical Box Connector

003173116
96T075: RNCC: 3 | RNVC: 2
1903: RNCC: 5 | RNVC: 2
5221: RNCC: 5 | RNVC: 2
20701: RNCC: 5 | RNVC: 2
PX2171: RNCC: 5 | RNVC: 9
1001-S: RNCC: 5 | RNVC: 9
251: RNCC: 5 | RNVC: 9
10875-2: RNCC: 5 | RNVC: 9
651: RNCC: 5 | RNVC: 9
7075W: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-591-4039
Electrical-Electronic Equipment Panel

015914039
10026472: RNCC: 3 | RNVC: 2
53812-000: RNCC: 5 | RNVC: 2

25 Jan 2011

5975-01-699-3590
Chassis Base

016993590
2060104304: RNCC: 3 | RNVC: 2

26 Jan 2022

5975-01-701-8074
Electrical Equipment Cabinet

017018074
Y1130B: RNCC: 3 | RNVC: 2

9 Jun 2022

5975-01-698-0908
Blank Panel

016980908
LS35301B06AY: RNCC: 3 | RNVC: 2

28 Oct 2021

5975-01-698-5910
Blank Panel

016985910
ADPHF02: RNCC: 3 | RNVC: 2

29 Nov 2021

5975-01-702-3751
Rigid Metal Conduit

017023751
130-369002-0021: RNCC: 3 | RNVC: 2

30 Jun 2022

5975-01-697-8934
Electrical Cable Protector

016978934
161-44300: RNCC: 3 | RNVC: 2

18 Oct 2021

5975-01-700-7878
Electrical Equipment Cabinet

017007878
439A4004-33: RNCC: 3 | RNVC: 2

13 Apr 2022

5975-01-698-8040
Chassis Base

016988040
O9500-R-PTN-CH-PA-PD-POE: RNCC: 3 | RNVC: 2

9 Dec 2021

5975-01-698-7117
Junction Box Cover

016987117
42080-4WS: RNCC: 3 | RNVC: 9
42080-4WS: RNCC: 5 | RNVC: 2

3 Dec 2021

5975-01-703-2767
Metallic Raceway Assembly

017032767
1001618-2: RNCC: 3 | RNVC: 9

26 Aug 2022

5975-01-700-8669
Mounting Plate

017008669
114S2720-1: RNCC: 3 | RNVC: 2

18 Apr 2022

5975-01-698-1339
Cable Terminal Chamber

016981339
LGY412548: RNCC: 3 | RNVC: 2
945-5141-0183: RNCC: 5 | RNVC: 2

29 Oct 2021

5975-01-697-9023
Electrical Equipment Cabinet

016979023
CRTPR051WWW/0: RNCC: 3 | RNVC: 2

18 Oct 2021

5975-01-694-4577
Electrical Equipment Shelf

016944577
50127761: RNCC: 3 | RNVC: 2
0350615109903: RNCC: 5 | RNVC: 2

2 Apr 2021

5975-01-699-5726
Stuffing Tube

016995726
CAP186194: RNCC: 3 | RNVC: 2
CAP186194: RNCC: 5 | RNVC: 2

9 Feb 2022

5975-01-698-2485
Electrical Equipment Cabinet

016982485
10002503: RNCC: 3 | RNVC: 2

4 Nov 2021

5975-01-698-2697
Blank Panel

016982697
Z-BP: RNCC: 3 | RNVC: 2

5 Nov 2021

5975-01-697-6483
Electrical Equipment Rack

016976483
RB-AWR-8: RNCC: 3 | RNVC: 2
WMR-9: RNCC: 5 | RNVC: 2

1 Oct 2021

5975-01-691-7495
Electrical Equipment Mounting Base

016917495
1CP104A: RNCC: 3 | RNVC: 2
0350624222002: RNCC: 5 | RNVC: 2

27 Oct 2020

5975-01-026-4995
Electrical Components Tie Down Strap

010264995
TYB23M: RNCC: 3 | RNVC: 2
4849354: RNCC: 5 | RNVC: 2
0124534000: RNCC: 5 | RNVC: 2
99028247: RNCC: 5 | RNVC: 2
FV 2190803 ITEM 34: RNCC: 5 | RNVC: 2
FV 2190803/34: RNCC: 5 | RNVC: 2
TYB23M: RNCC: 5 | RNVC: 2
A002528: RNCC: 5 | RNVC: 2
622-149: RNCC: 5 | RNVC: 2
TYB23M: RNCC: 5 | RNVC: 9

27 Aug 1976

5975-01-700-0922
Electrical Conductor Bushing

017000922
4938496: RNCC: 3 | RNVC: 2

16 Mar 2022

5975-01-700-5254
Electrical Equipment Cabinet

017005254
90B510172-1001: RNCC: 3 | RNVC: 2

31 Mar 2022

5975-01-700-5418
Junction Box

017005418
90A300303-1001: RNCC: 3 | RNVC: 2

1 Apr 2022

5975-01-701-9225
Junction Box

017019225
5411599-1: RNCC: 3 | RNVC: 2

16 Jun 2022

5975-01-506-1463
Electrical Components Tie Down Strap

015061463
PLT 3H-LO: RNCC: 3 | RNVC: 2
PLT3H-L0: RNCC: 5 | RNVC: 2
PLT3H-L0: RNCC: 5 | RNVC: 9

24 Mar 2003

5975-00-179-0097
Electrical Box Connector

001790097
EE737-1: RNCC: 3 | RNVC: 9
7185289: RNCC: 5 | RNVC: 2
TW96T075: RNCC: 5 | RNVC: 2
4080-8-15: RNCC: 5 | RNVC: 2
59115D27-38: RNCC: 5 | RNVC: 2
59066D41-47: RNCC: 5 | RNVC: 2
D10733-26-19: RNCC: 5 | RNVC: 2
D4080-8-15: RNCC: 5 | RNVC: 2
EE737-1: RNCC: 5 | RNVC: 9
SP4575: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-697-8201
Electrical Conduit Wye

016978201
EF7400: RNCC: 3 | RNVC: 2

13 Oct 2021

5975-00-497-0289
Electrical Conduit Coupling Nut

004970289
2ZA135-2: RNCC: 3 | RNVC: 2
2ZA3224-2: RNCC: 3 | RNVC: 2
SCD2099-1: RNCC: 3 | RNVC: 2
67766-55: RNCC: 5 | RNVC: 2
SCD3367-2: RNCC: 5 | RNVC: 2
54G411: RNCC: 5 | RNVC: 2
2Z3224-2: RNCC: 5 | RNVC: 2
1167: RNCC: 5 | RNVC: 9
SK1139: RNCC: 5 | RNVC: 9
1167: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3394
Electrical Conduit Bushing

002803394
BUC100: RNCC: 3 | RNVC: 2
1462: RNCC: 3 | RNVC: 2
S1324586-12: RNCC: 3 | RNVC: 2
1274: RNCC: 5 | RNVC: 2
LS964-12: RNCC: 5 | RNVC: 2
118-22C12: RNCC: 5 | RNVC: 2
BC-403: RNCC: 5 | RNVC: 9
117: RNCC: 5 | RNVC: 9
118-22C12: RNCC: 5 | RNVC: 9
SP1462: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1099
Electrical Conduit Bushing

001521099
126: RNCC: 3 | RNVC: 2
WF408: RNCC: 4 | RNVC: 1
156: RNCC: 4 | RNVC: 1
1106: RNCC: 5 | RNVC: 2
126: RNCC: 5 | RNVC: 2
BU405: RNCC: 5 | RNVC: 2
BU150: RNCC: 5 | RNVC: 2
416-108-M: RNCC: 5 | RNVC: 9
2-150: RNCC: 5 | RNVC: 9
11904: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-284-6978
Electrical Box Connector

002846978
2520: RNCC: 3 | RNVC: 2
CGB192: RNCC: 3 | RNVC: 2
02245-9119: RNCC: 3 | RNVC: 2
8168400: RNCC: 3 | RNVC: 2
WF406: RNCC: 4 | RNVC: 1
484641-4: RNCC: 5 | RNVC: 2
202874: RNCC: 5 | RNVC: 2
2520: RNCC: 5 | RNVC: 2
11240419-5: RNCC: 5 | RNVC: 2
272-1354P1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-677-7266
Electrical-Electronic Equipment Chassis

016777266
867158-B21: RNCC: 3 | RNVC: 2
867158-B21-5: RNCC: 5 | RNVC: 2

3 Jan 2019

5975-01-695-6795
Electrical Components Tie Down Strap

016956795
156-01757: RNCC: 3 | RNVC: 2
BM050580: RNCC: 5 | RNVC: 2
156-01757: RNCC: 5 | RNVC: 2
150-77937: RNCC: 5 | RNVC: 9

17 Jun 2021

5975-00-111-1226
Electrical Components Tie Down Strap

001111226
TY51M: RNCC: 3 | RNVC: 2
13217E3844: RNCC: 5 | RNVC: 2
M4ZS420D1468: RNCC: 5 | RNVC: 2
23789-5500-2690: RNCC: 5 | RNVC: 2
91483471: RNCC: 5 | RNVC: 2
M4ZS301D1251: RNCC: 5 | RNVC: 2
13217E3944: RNCC: 5 | RNVC: 2
PLM1M-M: RNCC: 5 | RNVC: 2
NSA935402-51: RNCC: 5 | RNVC: 2
NSA935402-51: RNCC: 5 | RNVC: 2

14 Aug 1968

5975-00-273-0788
Cable Strain Relief Bushing

002730788
58A5A33-2: RNCC: 3 | RNVC: 2
150-0050-00: RNCC: 3 | RNVC: 2
8193050: RNCC: 3 | RNVC: 2
6PHEYC0: RNCC: 3 | RNVC: 2
SR6P1: RNCC: 3 | RNVC: 2
SMB539317-1: RNCC: 3 | RNVC: 2
SR6P1: RNCC: 5 | RNVC: 2
17P0571263-1: RNCC: 5 | RNVC: 2
358-0025-00: RNCC: 5 | RNVC: 2
SMD349122-5: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-152-1071
Electrical Conduit Locknut

001521071
8192274: RNCC: 3 | RNVC: 2
144: RNCC: 3 | RNVC: 2
W-F-408: RNCC: 4 | RNVC: 1
LN7: RNCC: 5 | RNVC: 2
BL125: RNCC: 5 | RNVC: 2
SM-A-751501-1: RNCC: 5 | RNVC: 2
2131741: RNCC: 5 | RNVC: 2
144: RNCC: 5 | RNVC: 2
8168281: RNCC: 5 | RNVC: 2
2131741: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-641-2692
Electrical-Electronic Equipment Chassis

016412692
MIKB: RNCC: 3 | RNVC: 2
8030925V00: RNCC: 5 | RNVC: 2
8060177T00: RNCC: 5 | RNVC: 2

15 Jan 2015

5975-00-263-0805
Ground Rod

002630805
P-126: RNCC: 3 | RNVC: 9
J8326: RNCC: 5 | RNVC: 2
GR126: RNCC: 5 | RNVC: 9
GR126: RNCC: 5 | RNVC: 9
5006: RNCC: 5 | RNVC: 9
GR 126: RNCC: 5 | RNVC: 9
9427: RNCC: 5 | RNVC: 9
GR 126: RNCC: 5 | RNVC: 9
W126: RNCC: 5 | RNVC: 9
612: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-702-2148
Electrical Conduit Bushing

007022148
1226: RNCC: 3 | RNVC: 2
1226: RNCC: 5 | RNVC: 2
BU-150I: RNCC: 5 | RNVC: 2
1136: RNCC: 5 | RNVC: 2
365: RNCC: 5 | RNVC: 9
417-108-M: RNCC: 5 | RNVC: 9
BI-205: RNCC: 5 | RNVC: 9
IBC150: RNCC: 5 | RNVC: 9
12204: RNCC: 5 | RNVC: 9
55-150: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-652-8573
Electrical Box Connector

016528573
5334TB: RNCC: 3 | RNVC: 2

7 Mar 2016

5975-01-652-9839
Electrical Wall Plate

016529839
800-011285-1: RNCC: 3 | RNVC: 1

9 Mar 2016

5975-01-654-9129
Electronic Equipment Mounting Tray

016549129
284T0392-15: RNCC: 3 | RNVC: 1

12 May 2016

5975-01-657-4452
Electrical Conduit Adapter

016574452
M24758-3CL: RNCC: 3 | RNVC: 2

15 Aug 2016

5975-01-659-7418
Junction Box

016597418
12611119: RNCC: 3 | RNVC: 2
12604538: RNCC: 5 | RNVC: 2
12604538: RNCC: 5 | RNVC: 9

13 Dec 2016

5975-01-667-5549
Electrical Wall Plate

016675549
332B1488P1: RNCC: 3 | RNVC: 1

21 Oct 2017

5975-01-668-7881
Electrical Cable Protector

016687881
C637-2713: RNCC: 3 | RNVC: 2

7 Dec 2017

5975-01-675-5833
Electrical Equipment Rack

016755833
284T1067-209: RNCC: 3 | RNVC: 1

17 Sep 2018

5975-01-679-6562
Metallic Raceway Assembly

016796562
12575159: RNCC: 3 | RNVC: 2

4 Apr 2019

5975-01-683-1076
Junction Box

016831076
JG.SL.GLXY.S9-QDD: RNCC: 3 | RNVC: 2

9 Sep 2019

5975-01-688-0875
Electrical-Electronic Equipment Panel

016880875
LCAC100-512-02: RNCC: 3 | RNVC: 2
8592079-003: RNCC: 5 | RNVC: 2
512-8592673 FIND 46: RNCC: D | RNVC: 9
LCAC100-512-01 SHEET 12: RNCC: D | RNVC: 9
8592079: RNCC: D | RNVC: 9

4 May 2020

5975-01-689-6728
Electrical-Electronic Equipment Chassis

016896728
12611121: RNCC: 3 | RNVC: 2

2 Jul 2020

5975-01-689-7747
Junction Box

016897747
12611125: RNCC: 3 | RNVC: 2

9 Jul 2020

5975-01-631-1745
Electrical Entrance Elbow

016311745
13-1-0811: RNCC: 3 | RNVC: 2
7154K71: RNCC: 5 | RNVC: 2
7154K71: RNCC: 5 | RNVC: 9

3 Sep 2014

5975-01-646-0595
Electrical Components Tie Down Strap

016460595
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-12-0: RNCC: 3 | RNVC: 2
SAE-AS33671 (REV B): RNCC: 5 | RNVC: 1
MS3367-12-0: RNCC: 5 | RNVC: 9
SAE-AS33671 (REV B): RNCC: 5 | RNVC: 9
MS3367: RNCC: 5 | RNVC: 9

10 Jul 2015

5975-01-657-5981
Electrical Cable Protector

016575981
7225904: RNCC: 3 | RNVC: 2

22 Aug 2016

5975-01-658-7960
Electrical Components Tie Down Strap

016587960
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-6-0: RNCC: 3 | RNVC: 2
MS3367-6-0: RNCC: 3 | RNVC: 9
SAE-AS33671: RNCC: 5 | RNVC: 1
AP(R,L)-30-120-0: RNCC: 5 | RNVC: 2
10620: RNCC: 5 | RNVC: 2
RTH-2800-UV: RNCC: 5 | RNVC: 2
T120L0UV: RNCC: 5 | RNVC: 2
TY29MX-0: RNCC: 5 | RNVC: 2
TY529MX-0: RNCC: 5 | RNVC: 2

18 Oct 2016

5975-01-665-3011
Mounting Plate

016653011
332B1490P1: RNCC: 3 | RNVC: 1

24 Jul 2017

5975-01-675-4822
Electrical Equipment Rack

016754822
284T1716-307: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-5453
Electrical Equipment Rack

016755453
284T1713-302: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-631-2041
Electrical Cable Protector

016312041
13015847: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-675-4825
Electrical Equipment Rack

016754825
284T1721-308: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-675-5458
Electrical Equipment Rack

016755458
284T1741-11: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-642-0315
Rigid Nonmetallic Conduit

016420315
15007-100: RNCC: 3 | RNVC: 2
WSD-AC04219: RNCC: D | RNVC: 9

10 Feb 2015

5975-01-648-1098
Metallic Raceway

016481098
4001A: RNCC: 3 | RNVC: 2

15 Sep 2015

5975-01-648-2592
Flexible Nonmetallic Conduit

016482592
M3505002: RNCC: 3 | RNVC: 2
M3505002: RNCC: 5 | RNVC: 2
6HR402: RNCC: 7 | RNVC: 2

19 Sep 2015

5975-01-655-4122
Flexible Metal Conduit Assembly

016554122
254871-0722: RNCC: 3 | RNVC: 1

26 May 2016

5975-01-659-4124
Electrical Grounding Plate

016594124
12604516: RNCC: 3 | RNVC: 2
12604516: RNCC: 5 | RNVC: 2

23 Nov 2016

5975-01-675-5110
Electrical Equipment Shelf

016755110
284T2430-35: RNCC: 3 | RNVC: 1

13 Sep 2018

5975-01-678-2969
Junction Box

016782969
12601104: RNCC: 3 | RNVC: 2
12601104: RNCC: 5 | RNVC: 2

30 Jan 2019

5975-01-682-8316
Electrical-Electronic Equipment Chassis

016828316
11472247-1: RNCC: 3 | RNVC: 2
19-24-Z294-1285: RNCC: 3 | RNVC: 9

26 Aug 2019

5975-01-689-1030
Electronic Equipment Mounting Tray

016891030
284T0026-92: RNCC: 3 | RNVC: 2

4 Jun 2020

5975-01-689-1362
Electrical Equipment Shelf

016891362
284T2033-110: RNCC: 3 | RNVC: 1

6 Jun 2020

5975-01-629-4706
Wire Strand Hanger

016294706
1794-TB2: RNCC: 3 | RNVC: 2

1 Jul 2014

5975-01-657-4466
Electrical Conduit Adapter

016574466
M24758-4CL: RNCC: 3 | RNVC: 2

15 Aug 2016

5975-01-661-7580
Switch Terminal Cover

016617580
332B1480P1: RNCC: 3 | RNVC: 1

14 Mar 2017

5975-01-664-4534
Electrical Cable Protector

016644534
G022-0006: RNCC: 3 | RNVC: 2

20 Jun 2017

5975-01-675-5444
Electrical Equipment Rack

016755444
284T2035-112: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-687-5070
Electrical Tie Down Mounting Base

016875070
69B43202-1: RNCC: 3 | RNVC: 2

4 Apr 2020

5975-01-695-1880
Flexible Metal Conduit Assembly

016951880
10181-5199-18: RNCC: 3 | RNVC: 2

19 May 2021

5975-01-655-2447
Electrical Components Tie Down Strap

016552447
BACS38K3A: RNCC: 3 | RNVC: 2

23 May 2016

5975-01-668-1472
Electrical-Electronic Equipment Chassis

016681472
780920-01: RNCC: 3 | RNVC: 2
CRIO-9118: RNCC: 3 | RNVC: 2

9 Nov 2017

5975-01-668-5955
Electrical Wall Plate

016685955
332B1421P1: RNCC: 3 | RNVC: 1

29 Nov 2017

5975-01-695-2006
Electrical-Electronic Equipment Chassis

016952006
7300112: RNCC: 3 | RNVC: 2
100-CA-1834 ITEM 6: RNCC: C | RNVC: 1

20 May 2021

5975-01-617-0158
Rigid Metal Conduit

016170158
0550005000: RNCC: 3 | RNVC: 2
7126K11: RNCC: 5 | RNVC: 2

7 Mar 2013

5975-01-618-5388
Ground Rod Section

016185388
900388: RNCC: 3 | RNVC: 2

26 Apr 2013

5975-01-626-6335
Electrical-Electronic Equipment Chassis

016266335
CCHA42255-2: RNCC: 3 | RNVC: 2

18 Mar 2014

5975-01-662-2263
Cable Spacer

016622263
162B8074: RNCC: 3 | RNVC: 2
162B8074: RNCC: 3 | RNVC: 2

30 Mar 2017

5975-01-664-2248
Raceway End Cap

016642248
S1124-2: RNCC: 3 | RNVC: 9

10 Jun 2017

5975-01-668-4348
Electrical Standardized Components Case

016684348
65CABP6BK: RNCC: 3 | RNVC: 2
65CABP6BK: RNCC: 3 | RNVC: 9

22 Nov 2017

5975-01-674-7077
Junction Box

016747077
IH5S2-1: RNCC: 3 | RNVC: 2
IH5S2-1: RNCC: 3 | RNVC: 2
12603222: RNCC: 7 | RNVC: 2

8 Aug 2018

5975-01-675-4820
Electrical Equipment Rack

016754820
284T1712-308: RNCC: 3 | RNVC: 1

12 Sep 2018

5975-01-688-9351
Electrical Equipment Shelf

016889351
284T2603-11: RNCC: 3 | RNVC: 2

30 May 2020

5975-01-694-6163
Electrical Components Tie Down Strap

016946163
L-6-18-0-C: RNCC: 3 | RNVC: 2

13 Apr 2021

5975-01-627-7849
Electrical Tie Down Mounting Base

016277849
HDM500BHIHSUVC2: RNCC: 3 | RNVC: 2
3950851: RNCC: 5 | RNVC: 2

28 Apr 2014

5975-01-645-6734
Electrical Equipment Rack

016456734
12554945: RNCC: 3 | RNVC: 2

24 Jun 2015

5975-01-652-4711
Electrical Wall Plate

016524711
332B1470P1: RNCC: 3 | RNVC: 1

23 Feb 2016

5975-01-653-5974
Electrical Tie Down Mounting Base

016535974
ABM2S-AT-D0: RNCC: 3 | RNVC: 2
63450: RNCC: 3 | RNVC: 2
10043186: RNCC: 7 | RNVC: 2

30 Mar 2016

5975-01-654-4224
Flexible Metal Conduit Assembly

016544224
254871-0723: RNCC: 3 | RNVC: 1

27 Apr 2016

5975-01-659-2874
Junction Box

016592874
12604701: RNCC: 3 | RNVC: 2

16 Nov 2016

5975-01-662-6079
Electrical Tie Down Mounting Base

016626079
CTM40C2: RNCC: 3 | RNVC: 2
CTM40C2: RNCC: 3 | RNVC: 2
4063597: RNCC: 7 | RNVC: 2
12603193: RNCC: 7 | RNVC: 2

13 Apr 2017

5975-01-663-9593
Junction Box

016639593
IF-8900: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-675-6184
Electrical Equipment Rack

016756184
284T1722-305: RNCC: 3 | RNVC: 1

19 Sep 2018

5975-01-678-0807
Electrical Cable Assembly Protector

016780807
12609186: RNCC: 3 | RNVC: 2
12609186: RNCC: C | RNVC: 1

18 Jan 2019

5975-01-616-5950
Electrical Cable Nipple

016165950
RJ-45: RNCC: 3 | RNVC: 2
462-8216928-891: RNCC: 5 | RNVC: 1
H851-2201-891: RNCC: 5 | RNVC: 1
218080003: RNCC: 5 | RNVC: 2

21 Feb 2013

5975-01-618-5372
Ground Rod Section

016185372
900387: RNCC: 3 | RNVC: 2

26 Apr 2013

5975-01-620-0715
Junction Box

016200715
WSP150: RNCC: 3 | RNVC: 2
5322-0: RNCC: 3 | RNVC: 2
7219K11: RNCC: 5 | RNVC: 2
11B364108: RNCC: 5 | RNVC: 2

28 Jun 2013

5975-01-620-9728
Electrical Equipment Mounting Base

016209728
RF-7871-VM002: RNCC: 3 | RNVC: 2

20 Aug 2013

5975-01-631-2033
Electrical Cable Protector

016312033
13015831: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-649-3292
Metallic Raceway Assembly

016493292
311T3101-6: RNCC: 3 | RNVC: 1

26 Oct 2015

5975-01-652-7856
Electrical Wall Plate

016527856
800-011297-1: RNCC: 3 | RNVC: 1

3 Mar 2016

5975-01-653-7918
Switch Terminal Cover

016537918
233T5465-1: RNCC: 3 | RNVC: 1

5 Apr 2016

5975-01-671-3320
Guide Rail

016713320
97361353: RNCC: 3 | RNVC: 2
43020: RNCC: 5 | RNVC: 2
97361353: RNCC: 5 | RNVC: 9
4366499: RNCC: 7 | RNVC: 2

22 Mar 2018

5975-01-675-5437
Electrical Equipment Rack

016755437
284T1724-304: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-686-3653
Electrical-Electronic Equipment Panel

016863653
4359976: RNCC: 3 | RNVC: 2

11 Feb 2020

5975-01-616-7926
Electronic Equipment Mounting Tray

016167926
179224-1: RNCC: 3 | RNVC: 2
179224-1: RNCC: 3 | RNVC: 2
179224-1: RNCC: 5 | RNVC: 9

27 Feb 2013

5975-01-620-5055
Mounting Plate

016205055
GTS-DS3300-4844: RNCC: 3 | RNVC: 2
39R6545: RNCC: 3 | RNVC: 2
8346867: RNCC: D | RNVC: 9

26 Jul 2013

5975-01-650-3174
Electrical Tie Down Mounting Base

016503174
SAM83HIRHSH1: RNCC: 3 | RNVC: 2
3895122: RNCC: 5 | RNVC: 2
12603089: RNCC: 7 | RNVC: 2
SAM83: RNCC: D | RNVC: 9

28 Nov 2015

5975-01-669-4111
Electrical Wall Plate

016694111
HBL5206WO: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-675-5425
Electrical Equipment Rack

016755425
284T1715-302: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5457
Electrical Equipment Rack

016755457
284T1725-307: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-678-2986
Flexible Metal Conduit Assembly

016782986
12601358: RNCC: 3 | RNVC: 2
12601358: RNCC: 5 | RNVC: 2

30 Jan 2019

5975-01-687-5077
Electrical Tie Down Mounting Base

016875077
69B43202-3: RNCC: 3 | RNVC: 2

4 Apr 2020

5975-01-615-8486
Electrical Conduit Elbow

016158486
8081K31: RNCC: 3 | RNVC: 2
8081K31: RNCC: 5 | RNVC: 2

24 Jan 2013

5975-01-628-8788
Cable Terminal Chamber

016288788
EZ00000001010: RNCC: 3 | RNVC: 2
11018J0007: RNCC: 7 | RNVC: 2

12 Jun 2014

5975-01-649-5854
Metallic Raceway Assembly

016495854
311T5098-5: RNCC: 3 | RNVC: 1

3 Nov 2015

5975-01-652-7911
Electrical Wall Plate

016527911
800-011296-1: RNCC: 3 | RNVC: 1

3 Mar 2016

5975-01-652-9345
Flexible Metal Conduit Assembly

016529345
140221-2: RNCC: 3 | RNVC: 1
60B80091-2: RNCC: 7 | RNVC: 1

8 Mar 2016

5975-01-653-5184
Strain Electrical Conductor Clamp

016535184
69-70179-8: RNCC: 3 | RNVC: 1

26 Mar 2016

5975-01-659-4703
Junction Box

016594703
12604725: RNCC: 3 | RNVC: 2
12604725: RNCC: 5 | RNVC: 9

29 Nov 2016

5975-01-661-9125
Electrical Cable Protector

016619125
EZ00000000044: RNCC: 3 | RNVC: 2
4066326: RNCC: 7 | RNVC: 2

20 Mar 2017

5975-01-664-7581
Transmission Line Grounding Set

016647581
24307: RNCC: 3 | RNVC: 2
5ZV73: RNCC: 5 | RNVC: 2

5 Jul 2017

5975-01-667-5556
Electrical Wall Plate

016675556
332B1487P1: RNCC: 3 | RNVC: 1

21 Oct 2017

5975-01-678-9155
Electrical Components Tie Down Strap

016789155
MLT2.7S-CP: RNCC: 3 | RNVC: 2
0710235: RNCC: 3 | RNVC: 2
12601559: RNCC: 3 | RNVC: 2
0710235: RNCC: 5 | RNVC: 2
12601559: RNCC: D | RNVC: 9

5 Mar 2019

5975-01-679-6561
Metallic Raceway Assembly

016796561
12575158: RNCC: 3 | RNVC: 2

4 Apr 2019

5975-01-680-5889
Electrical Equipment Leg

016805889
BSMU-P-A348-ARM-15S: RNCC: 3 | RNVC: 2
BSMU-P-A348-ARM-15S: RNCC: 5 | RNVC: 2

13 May 2019

5975-01-689-4109
Electrical Equipment Shelf

016894109
284T2430-39: RNCC: 3 | RNVC: 1

18 Jun 2020

5975-01-652-9449
Electrical Wall Plate

016529449
800-011276-1: RNCC: 3 | RNVC: 1

8 Mar 2016

5975-01-653-4465
Mounting Plate

016534465
759945: RNCC: 3 | RNVC: 1

23 Mar 2016

5975-01-646-8442
Electrical Tie Down Mounting Base

016468442
HDM320B: RNCC: 3 | RNVC: 2
3810306: RNCC: 7 | RNVC: 2
12603149: RNCC: 7 | RNVC: 2

1 Aug 2015

5975-01-652-9451
Electrical Wall Plate

016529451
800-011277-1: RNCC: 3 | RNVC: 1
S233T100-3017: RNCC: 7 | RNVC: 1

8 Mar 2016

5975-01-652-9836
Electrical Wall Plate

016529836
800-011280-1: RNCC: 3 | RNVC: 1

9 Mar 2016

5975-01-658-7143
Electrical Components Tie Down Strap

016587143
TY525M: RNCC: 3 | RNVC: 2
TY525M: RNCC: 5 | RNVC: 2
TY525M: RNCC: 5 | RNVC: 9

13 Oct 2016

5975-01-675-5449
Electrical Equipment Rack

016755449
284T1714-307: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-675-5459
Electrical Equipment Rack

016755459
284T1743-2: RNCC: 3 | RNVC: 1

15 Sep 2018

5975-01-652-9830
Electrical Wall Plate

016529830
800-011278-1: RNCC: 3 | RNVC: 1

9 Mar 2016

5975-01-653-8059
Electrical Wall Plate

016538059
11455973-1: RNCC: 3 | RNVC: 2
CCD: RNCC: 5 | RNVC: 2
11455973: RNCC: D | RNVC: 9

6 Apr 2016

5975-01-655-8321
Electrical Wall Plate

016558321
332B1534P1: RNCC: 3 | RNVC: 1

8 Jun 2016

5975-01-657-7339
Electrical Conduit Adapter

016577339
M24758-2C: RNCC: 3 | RNVC: 2

27 Aug 2016

5975-01-663-1689
Electrical Cable Assembly Protector

016631689
7377795: RNCC: 3 | RNVC: 2

28 Apr 2017

5975-01-677-6190
Cable Hanger

016776190
CF 8/8 SPECIAL: RNCC: 3 | RNVC: 2
12603039: RNCC: 7 | RNVC: 2
12603039: RNCC: C | RNVC: 1

21 Dec 2018

5975-01-573-7955
Electric Cable Joint Box Supplementary Equipment

015737955
3760154: RNCC: 3 | RNVC: 2
3760154: RNCC: 5 | RNVC: 2
F3810-002031: RNCC: 6 | RNVC: 9

5 May 2009

5975-01-576-6376
Electrical Cable Protector

015766376
12602348: RNCC: 3 | RNVC: 2
492.250: RNCC: 3 | RNVC: 2
3256889: RNCC: 3 | RNVC: 2
3256889: RNCC: 5 | RNVC: 9
12602348: RNCC: 7 | RNVC: 2

10 Aug 2009

5975-01-569-1768
Junction Box

015691768
3763820: RNCC: 3 | RNVC: 2
3763820: RNCC: 5 | RNVC: 9

21 Nov 2008

5975-01-570-2307
Metallic Raceway Assembly

015702307
3729205: RNCC: 3 | RNVC: 2
3729205: RNCC: 5 | RNVC: 9

18 Dec 2008

5975-01-582-6872
Electrical Tie Down Mounting Base

015826872
HDM250: RNCC: 3 | RNVC: 2
HDM250: RNCC: 3 | RNVC: 2
3442645: RNCC: 5 | RNVC: 9
3442645: RNCC: 7 | RNVC: 2
12604442: RNCC: 7 | RNVC: 2

2 Mar 2010

5975-01-603-7436
Electrical-Electronic Equipment Panel

016037436
91-01172-05: RNCC: 3 | RNVC: 2
91-01172-00: RNCC: 5 | RNVC: 9

14 Mar 2012

5975-01-607-8354
Flexible Metal Conduit Assembly

016078354
57350-50FT0IN: RNCC: 3 | RNVC: 2

15 Jun 2012

5975-01-609-2539
Rigid Metal Conduit

016092539
4G14175-103A: RNCC: 3 | RNVC: 2

20 Jul 2012

5975-01-612-5664
Electrical Components Tie Down Strap

016125664
156-00020: RNCC: 3 | RNVC: 2
20817302: RNCC: 5 | RNVC: 2
41118702: RNCC: 5 | RNVC: 2
5M0B019697: RNCC: 5 | RNVC: 2
B019697: RNCC: 5 | RNVC: 2
T50ROSEC20: RNCC: 5 | RNVC: 2
7420817302: RNCC: 5 | RNVC: 2
156 00020: RNCC: 5 | RNVC: 2
3950492: RNCC: 5 | RNVC: 2
20817302: RNCC: 5 | RNVC: 9

15 Oct 2012

5975-01-584-5220
Stuffing Tube Adapter

015845220
M24758-15BB: RNCC: 3 | RNVC: 2

28 Apr 2010

5975-01-611-9693
Electrical Cable Protector

016119693
LCP-500-250: RNCC: 3 | RNVC: 2
LC9-500-250: RNCC: 5 | RNVC: 9
3870845: RNCC: 7 | RNVC: 2
3870845: RNCC: 7 | RNVC: 9

29 Sep 2012

5975-01-564-7785
Electrical Grounding Plate

015647785
80-40-0003: RNCC: 3 | RNVC: 2
80-40-0003: RNCC: 5 | RNVC: 9

27 Jun 2008

5975-01-573-7948
Shop Set Installation Electrical Kit

015737948
3805859: RNCC: 3 | RNVC: 2
3805859: RNCC: 5 | RNVC: 1

5 May 2009

5975-01-577-3524
Electrical Components Tie Down Strap

015773524
156-00877: RNCC: 3 | RNVC: 2
156-00006: RNCC: 5 | RNVC: 9
3950491: RNCC: 5 | RNVC: 9
3950491: RNCC: 5 | RNVC: 9
3837441: RNCC: 5 | RNVC: 9
3837441: RNCC: 7 | RNVC: 2
12603154: RNCC: 7 | RNVC: 2

3 Sep 2009

5975-01-577-5881
Module End Cap

015775881
1769-ECL: RNCC: 3 | RNVC: 2

11 Sep 2009

5975-01-584-5182
Flexible Metal Conduit

015845182
M24758-B: RNCC: 3 | RNVC: 2

28 Apr 2010

5975-01-597-9205
Electrical Equipment Mounting Base

015979205
65032-650-02: RNCC: 3 | RNVC: 2
902234-1: RNCC: 5 | RNVC: 2

22 Jun 2011

5975-01-600-5500
Electrical Components Tie Down Strap

016005500
156-04602 M: RNCC: 3 | RNVC: 2
156-04602: RNCC: 3 | RNVC: 2
3682563: RNCC: 5 | RNVC: 9
12601156: RNCC: 7 | RNVC: 2
3682563: RNCC: 7 | RNVC: 2

7 Dec 2011

5975-01-560-1900
Electrical Components Tie Down Strap

015601900
L140013-01: RNCC: 3 | RNVC: 2
L140013-01: RNCC: 5 | RNVC: 2
7130K44: RNCC: 5 | RNVC: 2
L-8-120-0-C: RNCC: 5 | RNVC: 2
7130K44: RNCC: 5 | RNVC: 2
L140013: RNCC: D | RNVC: 9

17 Jan 2008

5975-01-612-1856
Junction Box Cover

016121856
3193570-1A: RNCC: 3 | RNVC: 2
3193570: RNCC: D | RNVC: 9

4 Oct 2012

5975-01-582-6951
Electrical Tie Down Mounting Base

015826951
111-05350: RNCC: 3 | RNVC: 2
111-05350: RNCC: 3 | RNVC: 2
3682562: RNCC: 5 | RNVC: 9
3682562: RNCC: 7 | RNVC: 2
12543107: RNCC: 7 | RNVC: 2

3 Mar 2010

5975-01-595-5722
Electrical-Electronic Equipment Chassis

015955722
OS9700E-CMM: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-560-8272
Electronic Equipment Mounting Tray

015608272
1028656: RNCC: 3 | RNVC: 2
195600-0001: RNCC: 5 | RNVC: 2

13 Feb 2008

5975-01-565-9712
Electrical Components Tie Down Strap

015659712
KE1138: RNCC: 3 | RNVC: 2
K01399: RNCC: 5 | RNVC: 9
12509160-001: RNCC: 7 | RNVC: 2
12509160: RNCC: D | RNVC: 9

14 Aug 2008

5975-01-580-2651
Cable Hanger

015802651
95776A-01: RNCC: 3 | RNVC: 2
95776A-00: RNCC: 5 | RNVC: 9

9 Dec 2009

5975-01-603-6877
Junction Box

016036877
BW5-1A09194-501: RNCC: 3 | RNVC: 2
19-87-0330C: RNCC: 5 | RNVC: 1
321-7383755-001: RNCC: 5 | RNVC: 1
304-7383681-001: RNCC: 5 | RNVC: 1
BW5-1A09194 ITEM 1: RNCC: 5 | RNVC: 2

12 Mar 2012

5975-01-571-6950
Stuffing Tube

015716950
AX0685-3216-SP: RNCC: 3 | RNVC: 2
AX0685-3216-SP: RNCC: 5 | RNVC: 9

13 Feb 2009

5975-01-582-3748
Electrical Components Tie Down Strap

015823748
150-40582: RNCC: 3 | RNVC: 2
150-40582: RNCC: 5 | RNVC: 2
10823-14522: RNCC: 5 | RNVC: 2
3820459: RNCC: 5 | RNVC: 2
3820459: RNCC: 7 | RNVC: 9

18 Feb 2010

5975-01-593-1047
Electrical Equipment Mounting Base

015931047
6GK6050-0AR00-0FT0: RNCC: 3 | RNVC: 2
REPN-FT01: RNCC: 5 | RNVC: 9

4 Apr 2011

5975-01-607-8359
Flexible Metal Conduit Assembly

016078359
57350-39FT0IN: RNCC: 3 | RNVC: 2

15 Jun 2012

5975-01-591-5897
Motprot Resist Assy

015915897
762223-K01: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-609-2823
Flexible Metal Conduit

016092823
12510304: RNCC: 1 | RNVC: 2
W-1297-17: RNCC: 3 | RNVC: 2
179489-0212: RNCC: 3 | RNVC: 2
179489-0212: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-473-3423
Electrical Conduit Bushing

014733423
0510005-50-10: RNCC: 3 | RNVC: 2
252-7108324PN217: RNCC: 5 | RNVC: 2
0510005: RNCC: 5 | RNVC: 9
7108324: RNCC: D | RNVC: 9

5 Apr 2000

5975-01-495-3830
Electrical Equipment Rack

014953830
12422685: RNCC: 3 | RNVC: 2
4003543: RNCC: 5 | RNVC: 9

14 Mar 2002

5975-01-532-0286
Rigid Metal Conduit Assembly

015320286
11477597: RNCC: 3 | RNVC: 2
11477597: RNCC: 5 | RNVC: 2

26 Jul 2005

5975-01-461-6163
Flexible Nonmetallic Conduit

014616163
S2134: RNCC: 3 | RNVC: 2

21 Dec 1998

5975-01-484-7389
Electrical Cable Nipple

014847389
BU-62-0: RNCC: 3 | RNVC: 2
25CBLACK: RNCC: 5 | RNVC: 9

7 May 2001

5975-01-496-2221
Electrical Conduit Adapter

014962221
7997A90: RNCC: 3 | RNVC: 9

8 Apr 2002

5975-01-556-2823
Guide Rail

015562823
13016212: RNCC: 3 | RNVC: 2
13016212: RNCC: 5 | RNVC: 9

29 Sep 2007

5975-01-450-3871
Electrical Tie Down Mounting Base

014503871
CB4019G5N: RNCC: 3 | RNVC: 2

6 Nov 1997

5975-01-493-5986
Electrical Wall Plate

014935986
863-000655: RNCC: 3 | RNVC: 2
CCSV: RNCC: 5 | RNVC: 2
WR104CV: RNCC: 5 | RNVC: 9

10 Jan 2002

5975-01-519-0231
Ground Rod

015190231
H96-0001-012: RNCC: 3 | RNVC: 2

1 Apr 2004

5975-01-462-7334
Stuffing Tube

014627334
1990.5 SIZE E TYPE 67: RNCC: 3 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
9000S620274269-145: RNCC: 5 | RNVC: 2
1990.5 SIZE A TYPE 67: RNCC: 5 | RNVC: 9
9000S620274269: RNCC: D | RNVC: 9

16 Feb 1999

5975-01-474-8441
Flexible Metal Conduit

014748441
750-031-16: RNCC: 3 | RNVC: 2
750-031: RNCC: D | RNVC: 9

15 May 2000

5975-01-481-1209
Cable Hanger

014811209
12379862: RNCC: 3 | RNVC: 2

19 Dec 2000

5975-01-532-8095
Electrical Equipment Rack

015328095
170ADM69051: RNCC: 3 | RNVC: 2

22 Aug 2005

5975-01-549-1923
Conduit Outlet Cover

015491923
HBL5221M1: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-555-5198
Electrical Cable Protector

015555198
10KP777: RNCC: 3 | RNVC: 2
10KP777: RNCC: 3 | RNVC: 9
M1889008: RNCC: 5 | RNVC: 9
M1889008: RNCC: 5 | RNVC: 9

6 Sep 2007

5975-01-496-5269
Electrical Cable Protector

014965269
CP4X125: RNCC: 3 | RNVC: 9

18 Apr 2002

5975-01-538-4775
Cable Hanger

015384775
12489626: RNCC: 3 | RNVC: 2

23 Mar 2006

5975-01-549-8364
Ground Rod Kit

015498364
60219-052: RNCC: 3 | RNVC: 2

30 Mar 2007

5975-01-491-0230
Metallic Raceway Assembly

014910230
12296663: RNCC: 3 | RNVC: 2

10 Oct 2001

5975-01-521-8912
Junction Box

015218912
3426932: RNCC: 3 | RNVC: 2
3426932: RNCC: 3 | RNVC: 9

9 Jul 2004

5975-01-470-3127
Electrical Components Tie Down Strap

014703127
70215K54: RNCC: 3 | RNVC: 2

15 Dec 1999

5975-01-532-1432
Electrical-Electronic Equipment Chassis

015321432
MIRC-12V: RNCC: 3 | RNVC: 2
7715: RNCC: 5 | RNVC: 2
409-7632573 ITEM 17: RNCC: 5 | RNVC: 2

29 Jul 2005

5975-01-556-2826
Guide Rail

015562826
13016202: RNCC: 3 | RNVC: 2
13016202: RNCC: 5 | RNVC: 9

29 Sep 2007

5975-01-518-5842
Junction Box

015185842
3409165: RNCC: 3 | RNVC: 2
3409165: RNCC: 5 | RNVC: 9
3409166: RNCC: D | RNVC: 9

17 Mar 2004

5975-01-462-7224
Stuffing Tube

014627224
1945.4 SIZE D TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-114: RNCC: 5 | RNVC: 2
1945.4 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-546-0848
Electrical Conduit Ferrule

015460848
ZF1PK-10: RNCC: 3 | RNVC: 2

6 Dec 2006

5975-01-556-9356
Junction Box Assembly

015569356
482-7067865-A6: RNCC: 3 | RNVC: 2
H689-1703-A6: RNCC: 5 | RNVC: 1

9 Oct 2007

5975-01-556-9522
Junction Box Cover

015569522
140-065XMS-03: RNCC: 3 | RNVC: 2

10 Oct 2007

5975-01-297-2058
Electrical Nonmetallic Conduit Assembly

012972058
R58HB12F36W036D: RNCC: 3 | RNVC: 2
R58HB12F36W036D: RNCC: 3 | RNVC: 9
R58HB12F36W036D: RNCC: 5 | RNVC: 1
R58HB12F36W036D: RNCC: 5 | RNVC: 1
R58HB: RNCC: 7 | RNVC: 9

30 Mar 1989

5975-01-302-8284
Flexible Metal Conduit Assembly

013028284
10250675-61: RNCC: 3 | RNVC: 2
750-011NF16-115: RNCC: 5 | RNVC: 9
200206-DI1150: RNCC: 5 | RNVC: 9

21 Jun 1989

5975-01-390-5770
Electrical Equipment Mounting Base

013905770
MT-6967/G: RNCC: 3 | RNVC: 1
A3210000: RNCC: 3 | RNVC: 2
TM6005: RNCC: 5 | RNVC: 9

23 May 1994

5975-01-302-8289
Flexible Metal Conduit Assembly

013028289
750-011NF08-28: RNCC: 3 | RNVC: 1
200204-DI0280: RNCC: 3 | RNVC: 2
10250675-37: RNCC: 3 | RNVC: 2
10250675-37 18876: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-308-8747
Flexible Metal Conduit Assembly

013088747
25105-00480: RNCC: 3 | RNVC: 2
750-011NF08-48: RNCC: 3 | RNVC: 2
200204-DI0480: RNCC: 3 | RNVC: 2
10250675-41: RNCC: 7 | RNVC: 2

6 Oct 1989

5975-01-308-1801
Electrical Nonmetallic Conduit Assembly

013081801
252581: RNCC: 3 | RNVC: 2

23 Sep 1989

5975-01-323-9220
Metallic Raceway

013239220
1479AS101-7: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-371-7336
Electrical Equipment Mounting Base

013717336
70600-81805-102: RNCC: 1 | RNVC: 2
4520-102: RNCC: 3 | RNVC: 2

22 Feb 1993

5975-01-297-1438
Crossover Conduit Connector

012971438
150136: RNCC: 3 | RNVC: 2
G63162-1: RNCC: 3 | RNVC: 2
186703-FB6200: RNCC: 3 | RNVC: 2
10250676-1: RNCC: 7 | RNVC: 2

29 Mar 1989

5975-01-440-1813
Electrical Nonmetallic Conduit Assembly

014401813
R58HB31A34X008: RNCC: 3 | RNVC: 2
R58HB31A34X008: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

7 Jan 1997

5975-01-343-1309
Electronic Junction Rack

013431309
DCR-1A-08: RNCC: 3 | RNVC: 2
4081-56030-168: RNCC: 5 | RNVC: 9
4081-56030-168: RNCC: 7 | RNVC: 2

6 Aug 1991

5975-01-371-8283
Electrical Components Tie Down Strap

013718283
15494: RNCC: 1 | RNVC: 2
PLT4S-C0: RNCC: 3 | RNVC: 2
AL-14-50-0-C: RNCC: 5 | RNVC: 2
PLT4S-C0: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-01-373-8354
Electrical Conduit Elbow

013738354
713HL101NF13116: RNCC: 3 | RNVC: 1
11469261-005: RNCC: 3 | RNVC: 2
11469261: RNCC: D | RNVC: 9

11 Apr 1993

5975-01-374-2386
Electrical-Electronic Equipment Chassis

013742386
M19622/17-0001: RNCC: 2 | RNVC: 2
F615E001 ITEM 10: RNCC: 5 | RNVC: 1

19 Apr 1993

5975-01-374-0283
Electrical Conduit Elbow

013740283
713HL101NF15116: RNCC: 3 | RNVC: 1
11469261-004: RNCC: 3 | RNVC: 2

14 Apr 1993

5975-01-413-2287
Electrical Conduit Coupling

014132287
S82200-EM08: RNCC: 3 | RNVC: 2
RP2200-EM08: RNCC: 3 | RNVC: 2
RP2200-EM08: RNCC: 5 | RNVC: 2
RP2200-EM08: RNCC: 5 | RNVC: 2
RP2200-EM08: RNCC: 5 | RNVC: 9
S82200-EM08: RNCC: 5 | RNVC: 9

9 May 1995

5975-01-443-8505
Electrical Equipment Mounting Base

014438505
622-8766-001: RNCC: 3 | RNVC: 2
MT-6567/ARC: RNCC: 5 | RNVC: 1
LE478-0015-0002: RNCC: 7 | RNVC: 2
MT-6567/ARC210: RNCC: C | RNVC: 1

21 Apr 1997

5975-01-386-6541
Cable Strain Relief Bushing

013866541
RM20: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
RM20: RNCC: 5 | RNVC: 9
3690641C: RNCC: 5 | RNVC: 9
3690641C1L: RNCC: 5 | RNVC: 9

10 Feb 1994

5975-01-304-1717
Cable Hanger

013041717
101-107-339: RNCC: 3 | RNVC: 2
101-107-302: RNCC: 5 | RNVC: 9
5975PL1293609: RNCC: 6 | RNVC: 9

13 Jul 1989

5975-01-376-5776
Flexible Metal Conduit Assembly

013765776
750-070-009: RNCC: 3 | RNVC: 2
11468897-009: RNCC: 7 | RNVC: 1

6 Jun 1993

5975-01-379-9787
Flexible Metal Conduit Assembly

013799787
57350-25FT0IN: RNCC: 3 | RNVC: 2
POD-57350-25: RNCC: 5 | RNVC: 2
POD-57350-25: RNCC: 5 | RNVC: 9

12 Sep 1993

5975-01-424-3604
Junction Box Cover

014243604
70550-02139-044: RNCC: 3 | RNVC: 2
70550-02139-044: RNCC: 5 | RNVC: 2
70550-02139: RNCC: D | RNVC: 9

26 Jan 1996

5975-01-302-9635
Flexible Metal Conduit Assembly

013029635
750-011NF24-54.5: RNCC: 3 | RNVC: 1
200187-DI0545: RNCC: 3 | RNVC: 1
10250675-81: RNCC: 3 | RNVC: 2

22 Jun 1989

5975-01-308-8793
Ground Rod Assembly

013088793
845010A1000: RNCC: 3 | RNVC: 2

6 Oct 1989

5975-01-373-8355
Electrical Conduit Elbow

013738355
713HL101NF11116: RNCC: 3 | RNVC: 1
11469261-003: RNCC: 3 | RNVC: 2

11 Apr 1993

5975-01-412-4551
Electrical Tie Down Mounting Base

014124551
A3206207: RNCC: 3 | RNVC: 2
A3206207: RNCC: 3 | RNVC: 2

19 Apr 1995

5975-01-130-0519
Junction Box Cover

011300519
C7970-1: RNCC: 1 | RNVC: 2
ZT112-200BC0T-5-DD: RNCC: 3 | RNVC: 2

15 Apr 1982

5975-01-134-0762
Electrical Nonmetallic Conduit Assembly

011340762
4B69142-189A: RNCC: 3 | RNVC: 2
4B69142-189A: RNCC: 5 | RNVC: 2

26 Jun 1982

5975-01-281-5267
Electrical Components Tie Down Strap

012815267
PLT2S-C76: RNCC: 3 | RNVC: 2
PLT2S-M76: RNCC: 5 | RNVC: 2

25 Jun 1988

5975-01-163-6490
Electrical Nonmetallic Conduit Assembly

011636490
CRN2154: RNCC: 3 | RNVC: 2

6 Oct 1983

5975-01-195-3270
Electrical Nonmetallic Conduit Assembly

011953270
910247: RNCC: 3 | RNVC: 2

28 Nov 1984

5975-01-231-5180
Electrical Box Connector

012315180
SHC-1037-CR: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-262-9575
Electrical Equipment Shelf

012629575
A3046236: RNCC: 3 | RNVC: 2

6 Sep 1987

5975-01-209-4056
Rigid Metal Conduit

012094056
4G14347-101A: RNCC: 3 | RNVC: 2

29 May 1985

5975-01-212-4305
Cable Shield Adapter

012124305
GA/CSGA-D: RNCC: 3 | RNVC: 2
CSGA-D: RNCC: 5 | RNVC: 2
CSGA-D: RNCC: 5 | RNVC: 9

12 Jul 1985

5975-01-249-7236
Stuffing Tube

012497236
M24235/14-122: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-261-1292
Electrical Tie Down Mounting Base

012611292
TC344A: RNCC: 3 | RNVC: 2
55820-46/151: RNCC: 5 | RNVC: 2

9 Aug 1987

5975-01-271-3989
Junction Box

012713989
75452-27-D: RNCC: 3 | RNVC: 2
75452-27-D: RNCC: 5 | RNVC: 9

23 Jan 1988

5975-01-208-2225
Electrical Components Tie Down Strap

012082225
0710236: RNCC: 3 | RNVC: 2
MLT4S-CP: RNCC: 3 | RNVC: 2
9M896-4: RNCC: 5 | RNVC: 1
592-717: RNCC: 5 | RNVC: 2
0241 1455: RNCC: 5 | RNVC: 2
4164885: RNCC: 5 | RNVC: 2
ST45D52-2: RNCC: 7 | RNVC: 1
12601603: RNCC: 7 | RNVC: 2
5727672-2: RNCC: C | RNVC: 1

10 May 1985

5975-01-213-4830
Electrical Box Connector

012134830
7364001427: RNCC: 3 | RNVC: 2
5524: RNCC: 3 | RNVC: 2
7-364-001427: RNCC: 5 | RNVC: 2
2CT250: RNCC: 5 | RNVC: 2
2CT250: RNCC: 5 | RNVC: 9

26 Jul 1985

5975-01-112-6610
Rigid Metal Conduit Assembly

011126610
4B69142-143A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-174-3646
Junction Box

011743646
A8064CHAL: RNCC: 3 | RNVC: 2
AB-864JHA: RNCC: 5 | RNVC: 9
E-8064CHAL: RNCC: 5 | RNVC: 9

16 Mar 1984

5975-01-243-9900
Flexible Nonmetallic Conduit

012439900
64498R: RNCC: 3 | RNVC: 2
48-02217-025: RNCC: 3 | RNVC: 2
48-02217: RNCC: 5 | RNVC: 1
LCN-250: RNCC: 5 | RNVC: 2
48-2217-025: RNCC: 5 | RNVC: 9
68237: RNCC: 5 | RNVC: 9
LCN-250: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-277-3511
Gearbox Assembly

012773511
C-81811-1: RNCC: 3 | RNVC: 2

20 Apr 1988

5975-01-280-3230
Electrical Box Connector

012803230
RLA150-80: RNCC: 3 | RNVC: 2
2061: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-226-1887
Electrical Nonmetallic Conduit Assembly

012261887
910244: RNCC: 3 | RNVC: 2
CRN2152: RNCC: 5 | RNVC: 2

13 Feb 1986

5975-01-143-4801
Electrical Nonmetallic Conduit Assembly

011434801
910242: RNCC: 3 | RNVC: 2

4 Dec 1982

5975-01-165-8666
Flexible Metal Conduit

011658666
MHT-125-31: RNCC: 3 | RNVC: 1
750-084-40: RNCC: 3 | RNVC: 2
023700-HP1250: RNCC: 3 | RNVC: 2
SM83-10: RNCC: 5 | RNVC: 2
71350-125-31: RNCC: 5 | RNVC: 2
SM83-10: RNCC: 5 | RNVC: 9

4 Nov 1983

5975-01-212-3650
Cable Shield Adapter

012123650
GA/CSGA-B: RNCC: 3 | RNVC: 2
SEEPA-S-B-A: RNCC: 5 | RNVC: 2
CSGA-B: RNCC: 5 | RNVC: 2
CSGA-B: RNCC: 5 | RNVC: 9

11 Jul 1985

5975-01-219-7675
Flexible Nonmetallic Conduit

012197675
SAE-AS81914/2: RNCC: 3 | RNVC: 1
M81914/2-1005: RNCC: 3 | RNVC: 2
MIL-T-81914: RNCC: 5 | RNVC: 9
M81914/2-1005: RNCC: 5 | RNVC: 9

2 Nov 1985

5975-01-241-8677
Electrical Nonmetallic Conduit Assembly

012418677
6166907: RNCC: 3 | RNVC: 2
6166907: RNCC: 5 | RNVC: 2

3 Oct 1986

5975-00-614-9686
Rigid Metal Conduit

006149686
4G14176-103A: RNCC: 3 | RNVC: 2

12 Feb 1975

5975-01-020-9174
Cable Hanger

010209174
101-107-057: RNCC: 3 | RNVC: 2
2065: RNCC: 3 | RNVC: 2
RTD 2531: RNCC: 5 | RNVC: 1
2065: RNCC: 5 | RNVC: 2
2065: RNCC: 5 | RNVC: 9
2065: RNCC: 5 | RNVC: 9

7 May 1976

5975-00-660-5962
Electrical Cable Nipple

006605962
2969608: RNCC: 3 | RNVC: 1
8724494: RNCC: 3 | RNVC: 2
1993280: RNCC: 5 | RNVC: 1
13207E6499: RNCC: 5 | RNVC: 1
CF0212: RNCC: 5 | RNVC: 2
1993280: RNCC: 5 | RNVC: 9
5975006605962: RNCC: 5 | RNVC: 9
10386524: RNCC: 6 | RNVC: 9
8724494: RNCC: 8 | RNVC: 2

1 Jan 1963

5975-00-808-4066
Stuffing Tube

008084066
M19622-3-006: RNCC: 2 | RNVC: 2
MILS19622-3: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-578-3667
Electrical Box Connector

005783667
A-A50552-00I-3-K: RNCC: 2 | RNVC: 2
A-A50552: RNCC: 4 | RNVC: 1
ST9075: RNCC: 5 | RNVC: 1
WF406: RNCC: 5 | RNVC: 9
8900-0464-002: RNCC: C | RNVC: 1
551-5871399 PC9: RNCC: C | RNVC: 1
3423: RNCC: C | RNVC: 1
PG90 75-STB: RNCC: C | RNVC: 1
SM-A-949385-14: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-034-5623
Sealing Insert Block

010345623
RM00300301000: RNCC: 3 | RNVC: 2
M24705/1BN30: RNCC: 4 | RNVC: 1
30/0: RNCC: 5 | RNVC: 1
RM 30/0: RNCC: 5 | RNVC: 1
30/0: RNCC: 5 | RNVC: 2
RM00300301000: RNCC: 5 | RNVC: 2
MIL-P-24705/1: RNCC: 5 | RNVC: 9
30/0: RNCC: 5 | RNVC: 9
RM 30/0: RNCC: 5 | RNVC: 9
30/0: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-00-782-6142
Stuffing Tube

007826142
M19622-4-04: RNCC: 2 | RNVC: 2
MIL-S-19622: RNCC: 4 | RNVC: 1
M19622-4-04: RNCC: 5 | RNVC: 1
MILS19622D: RNCC: 5 | RNVC: 9

2 Feb 1968

5975-01-085-2779
Electrical Cable Nipple

010852779
1000694-001: RNCC: 3 | RNVC: 2
5975PL0806889: RNCC: 6 | RNVC: 9

5 Nov 1979

5975-00-752-2945
Stuffing Tube

007522945
M19622/3-004: RNCC: 2 | RNVC: 2
MIL-S-19622/3: RNCC: 4 | RNVC: 1
318244-210: RNCC: 5 | RNVC: 2
MS17041-1: RNCC: 5 | RNVC: 9
5975PL0972584: RNCC: 6 | RNVC: 9
9000S6202-74121: RNCC: C | RNVC: 1
PL-318244 ITEM: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-808-4063
Stuffing Tube

008084063
M19622/3-001: RNCC: 2 | RNVC: 2
MILS19622-3: RNCC: 4 | RNVC: 1
MS17041-1: RNCC: 5 | RNVC: 9
K91-0029: RNCC: C | RNVC: 1
MS17039-1: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-881-7963
Stuffing Tube

008817963
M24235-1-002: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-01-069-8180
Wire Marker

010698180
44-101: RNCC: 3 | RNVC: 2

24 Dec 1978

5975-01-077-1518
Electrical Grounding Plate

010771518
12282021: RNCC: 3 | RNVC: 2

18 May 1979

5975-00-080-7540
Junction Box

000807540
8756390: RNCC: 3 | RNVC: 2
5975000807540: RNCC: 5 | RNVC: 9
5975000807540: RNCC: 6 | RNVC: 9

8 Dec 1967

5975-00-161-4947
Electrical Conduit Ferrule

001614947
4B69010-103A: RNCC: 3 | RNVC: 2

13 Jan 2004

5975-00-244-6118
Crossarm Brace

002446118
MS39030-3: RNCC: 2 | RNVC: 2
MILH55053: RNCC: 4 | RNVC: 1
PF7: RNCC: 5 | RNVC: 1
8130: RNCC: 5 | RNVC: 9
8130: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-096-2720
Junction Box

000962720
M24142-6-006: RNCC: 2 | RNVC: 2
MIL-E-24142-6: RNCC: 4 | RNVC: 1
MILJ24142-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-156-5726
Junction Box

001565726
4B69016-101A: RNCC: 3 | RNVC: 2

17 Jan 1973

5975-01-598-9839
Electrical-Electronic Equipment Chassis

015989839
341D749G01: RNCC: 3 | RNVC: 2
341D749G01: RNCC: 3 | RNVC: 9
341D749: RNCC: D | RNVC: 9

7 Sep 2011

5975-01-600-3553
Electrical Components Tie Down Strap

016003553
326-4512: RNCC: 3 | RNVC: 2
26KP873: RNCC: 5 | RNVC: 2
26KP873: RNCC: 5 | RNVC: 9

26 Nov 2011

5975-01-609-5618
Stuffing Tube

016095618
6907K14: RNCC: 3 | RNVC: 2

27 Jul 2012

5975-01-609-8153
Ground Rod

016098153
89242: RNCC: 3 | RNVC: 2
0012-35-0011: RNCC: 5 | RNVC: 2

3 Aug 2012

5975-01-667-0257
Electrical Components Tie Down Strap

016670257
B7S0C: RNCC: 3 | RNVC: 2

29 Sep 2017

5975-01-678-4638
Rigid Metal Conduit Assembly

016784638
2-60216-43: RNCC: 3 | RNVC: 2

7 Feb 2019

5975-01-684-8899
Electrical-Electronic Equipment Panel

016848899
842-447181-27: RNCC: 3 | RNVC: 2

19 Nov 2019

5975-01-694-8361
Electronic Equipment Mounting Tray

016948361
78230-01002-041: RNCC: 3 | RNVC: 2

28 Apr 2021

5975-01-686-6958
Electrical Equipment Mounting Base

016866958
4101AS0200-1: RNCC: 3 | RNVC: 2
4101AS0200-1: RNCC: 5 | RNVC: 2
4101AS0200: RNCC: D | RNVC: 9

28 Feb 2020

5975-01-675-1014
Electrical Grounding Plate

016751014
08002B0500: RNCC: 3 | RNVC: 2

22 Aug 2018

5975-01-550-7244
Electrical-Electronic Equipment Chassis

015507244
A3266233-1: RNCC: 3 | RNVC: 2

26 Apr 2007

5975-01-550-7106
Electrical Components Tie Down Strap

015507106
L-4-18-0-C: RNCC: 3 | RNVC: 2
L-4-18-0-C: RNCC: 5 | RNVC: 2

26 Apr 2007

5975-01-551-3377
Panel Mount Frame

015513377
1852985: RNCC: 3 | RNVC: 2
N260E002-IT92: RNCC: 5 | RNVC: 2

15 May 2007

5975-01-552-0730
Electrical Nonmetallic Conduit Assembly

015520730
R58HB16E49W096D: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-01-552-7492
Strain Electrical Conductor Clamp

015527492
30-302-2D08G15: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-553-2287
Flexible Metal Conduit Assembly

015532287
23A03168: RNCC: 3 | RNVC: 2

11 Jul 2007

5975-01-554-7778
Electrical Components Tie Down Strap

015547778
18106-X: RNCC: 3 | RNVC: 2

20 Aug 2007

5975-01-555-2978
Electrical Equipment Rack

015552978
90-751-A: RNCC: 3 | RNVC: 2

31 Aug 2007

5975-01-556-1285
Flexible Nonmetallic Conduit

015561285
120-100-1-1-24BT: RNCC: 3 | RNVC: 2

25 Sep 2007

5975-01-558-4060
Underground Cable Rack Hook

015584060
A3184330: RNCC: 3 | RNVC: 2

8 Nov 2007

5975-01-559-4879
Electrical Equipment Mounting Base

015594879
SPC10577: RNCC: 3 | RNVC: 9
19C7296: RNCC: 5 | RNVC: 2

19 Dec 2007

5975-01-559-6289
Switch Terminal Cover

015596289
59L.655: RNCC: 3 | RNVC: 2
12378618-027: RNCC: 7 | RNVC: 2
12378618: RNCC: D | RNVC: 9

27 Dec 2007

5975-01-559-6748
Electrical Conduit Adapter

015596748
712FS178B1428-31: RNCC: 3 | RNVC: 2

31 Dec 2007

5975-01-559-8780
Electrical Components Tie Down Strap

015598780
L-11-50-0-C: RNCC: 3 | RNVC: 2
AL-11-50-0-C: RNCC: 5 | RNVC: 2
3LP21: RNCC: 5 | RNVC: 9

9 Jan 2008

5975-01-561-4260
Electrical Grounding Plate

015614260
NSI 1012M: RNCC: 3 | RNVC: 2
205044-01: RNCC: 7 | RNVC: 2
205044: RNCC: D | RNVC: 9

5 Mar 2008

5975-01-561-7369
Electrical Equipment Mounting Base

015617369
70600-21017-041: RNCC: 3 | RNVC: 2

17 Mar 2008

5975-01-563-3702
Electrical Conduit Adapter

015633702
712S379NF16-12: RNCC: 3 | RNVC: 2
712S279NF16-12: RNCC: 5 | RNVC: 9
712S379NF16-12: RNCC: 5 | RNVC: 9

9 May 2008

5975-01-563-9569
Electrical Equipment Mounting Base

015639569
3824758C1L: RNCC: 3 | RNVC: 2
3824758C1: RNCC: 5 | RNVC: 9

30 May 2008

5975-01-565-0195
Electrical-Electronic Equipment Panel

015650195
675-11565-603: RNCC: 3 | RNVC: 2

8 Jul 2008

5975-01-565-6240
Electrical-Electronic Equipment Chassis

015656240
1756-A7/B: RNCC: 3 | RNVC: 2
7709E61-ITEM10: RNCC: 5 | RNVC: 2

31 Jul 2008

5975-01-565-9380
Electrical-Electronic Equipment Chassis

015659380
1682190000: RNCC: 3 | RNVC: 2
1682190000: RNCC: 5 | RNVC: 2
7710E06P3: RNCC: 5 | RNVC: 2

13 Aug 2008

5975-01-566-0949
Mount Block

015660949
13017925: RNCC: 3 | RNVC: 2

19 Aug 2008

5975-01-566-3912
Junction Box

015663912
70.0045: RNCC: 3 | RNVC: 2
7710E02P16: RNCC: 5 | RNVC: 2

29 Aug 2008

5975-01-566-9561
Electronic Equipment Mounting Tray

015669561
4294306: RNCC: 3 | RNVC: 2
4294306: RNCC: 5 | RNVC: 2

15 Sep 2008

5975-01-568-3092
Electrical Equipment Mounting Base

015683092
A3266020: RNCC: 3 | RNVC: 2

27 Oct 2008

5975-01-578-2388
Rigid Metal Conduit Assembly

015782388
111864: RNCC: 3 | RNVC: 2

30 Sep 2009

5975-01-578-5840
Electrical Cable Nipple

015785840
90-115-1: RNCC: 3 | RNVC: 2

13 Oct 2009

5975-01-578-3233
Electrical Equipment Shelf

015783233
KA18-7200: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-7205
Electrical Equipment Mounting Base

015787205
74A880832-1001: RNCC: 3 | RNVC: 2

19 Oct 2009

5975-01-579-5400
Electrical Conduit Adapter

015795400
75145K33: RNCC: 3 | RNVC: 2
75145K33: RNCC: 3 | RNVC: 9

16 Nov 2009

5975-01-580-4992
Electrical Components Tie Down Strap

015804992
63130: RNCC: 3 | RNVC: 2
10010749: RNCC: 7 | RNVC: 2
S000193: RNCC: D | RNVC: 9

16 Dec 2009

5975-01-581-6264
Electrical Tie Down Mounting Base

015816264
TBC360: RNCC: 3 | RNVC: 2
KSS360: RNCC: 5 | RNVC: 9

22 Jan 2010

5975-01-581-2513
Electrical Equipment Drawer

015812513
03002A1231-1: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-582-3129
Electrical Grounding Plate

015823129
GS120941213: RNCC: 3 | RNVC: 2
07003A1047: RNCC: 3 | RNVC: 2

16 Feb 2010

5975-01-583-5822
Electrical Components Tie Down Strap

015835822
R0101423: RNCC: 3 | RNVC: 2
R0101423: RNCC: 5 | RNVC: 2
R0101423-FH00: RNCC: D | RNVC: 9

30 Mar 2010

5975-01-584-5371
Electrical Conduit Adapter

015845371
M24758-2 E: RNCC: 3 | RNVC: 2

28 Apr 2010

5975-01-570-8624
Electrical Test Set Faceplate

015708624
04-0318-05: RNCC: 3 | RNVC: 2

15 Jan 2009

5975-01-571-7644
Electrical Components Tie Down Strap

015717644
PLT6H-C0: RNCC: 3 | RNVC: 2
SS-5540: RNCC: D | RNVC: 9

18 Feb 2009

5975-01-571-9451
Electrical Equipment Mounting Base

015719451
13011355: RNCC: 3 | RNVC: 2

20 Feb 2009

5975-01-572-9783
Electrical-Electronic Equipment Panel

015729783
PBPA19003BK2: RNCC: 3 | RNVC: 2
94F4769: RNCC: 5 | RNVC: 2
4103 REV C ITEM 50: RNCC: 5 | RNVC: 2

2 Apr 2009

5975-01-574-6370
Electrical Equipment Rack

015746370
ACS2510001: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-9294
Electrical Components Tie Down Strap

015749294
1233202: RNCC: 3 | RNVC: 2
123-3202: RNCC: 5 | RNVC: 2
50027833: RNCC: 5 | RNVC: 2
50027833: RNCC: 5 | RNVC: 9

15 Jun 2009

5975-01-575-1883
Lug Kit

015751883
EML25: RNCC: 3 | RNVC: 2
EML25: RNCC: 5 | RNVC: 2
EML25: RNCC: 5 | RNVC: 9

23 Jun 2009

5975-01-575-6570
Electrical Box Connector

015756570
7529K24: RNCC: 3 | RNVC: 2

10 Jul 2009

5975-01-576-0220
Electrical Conduit Coupling Nut Clamp

015760220
CNF12-16: RNCC: 3 | RNVC: 2
G675848-1: RNCC: 5 | RNVC: 2
G675848: RNCC: D | RNVC: 9

21 Jul 2009

5975-01-591-4879
Disconnect Assy

015914879
198943-T01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-5895
Panel

015915895
749012-A00: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-592-4906
Electrical Conduit Adapter

015924906
06628: RNCC: 3 | RNVC: 2

8 Mar 2011

5975-01-595-4316
Interconnecting Box

015954316
7548195-239: RNCC: 3 | RNVC: 2

27 Apr 2011

5975-01-595-3991
Cable Terminal Chamber

015953991
1492-EAJ35: RNCC: 3 | RNVC: 2

26 Apr 2011

5975-01-595-8862
Electrical Tie Down Mounting Base

015958862
CB4019C5N: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-595-8861
Electrical Tie Down Mounting Base

015958861
CB4020G5N16: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-596-1066
Electrical Equipment Rack

015961066
RFCOVPAN20: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-586-3402
Electrical Components Tie Down Strap

015863402
3LV32: RNCC: 3 | RNVC: 2
TS-904: RNCC: 5 | RNVC: 2
TS-904: RNCC: 5 | RNVC: 9

25 Jun 2010

5975-01-586-4686
Wire Strand Hanger

015864686
20476-01: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-8621
Electrical Grounding Plate

015868621
3841120: RNCC: 3 | RNVC: 2
3841120: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-586-8798
Electrical Equipment Shelf

015868798
3859567: RNCC: 3 | RNVC: 2
3859567: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-586-8797
Electrical Equipment Shelf

015868797
3859568: RNCC: 3 | RNVC: 2
3859568: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-588-6552
Insulator Bracket Strap

015886552
12490268: RNCC: 3 | RNVC: 2

28 Sep 2010

5975-01-589-6260
Electrical Equipment Mounting Base

015896260
RAM-D-133U: RNCC: 3 | RNVC: 2
3902025: RNCC: 5 | RNVC: 2
3902025: RNCC: 7 | RNVC: 9

1 Nov 2010

5975-01-590-5265
Flexible Nonmetallic Conduit

015905265
4L59102-101B: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-591-3073
Cable Marker Sleeve

015913073
HT-TMS-1/8-1.75-9: RNCC: 3 | RNVC: 2

20 Jan 2011

5975-01-596-7387
Electrical Grounding Plate

015967387
03002A1840-2: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-598-7510
Electrical Conduit Wye

015987510
LN81010-2: RNCC: 1 | RNVC: 2
431-001NFA05B03C04: RNCC: 3 | RNVC: 2

25 Aug 2011

5975-01-605-0367
Electrical Wall Plate

016050367
55000205: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-9306
Electrical Conduit Elbow

016059306
065-002613-0004: RNCC: 3 | RNVC: 2
8533K34: RNCC: 5 | RNVC: 2
065-002613: RNCC: 7 | RNVC: 2

1 May 2012

5975-01-607-0279
Stuffing Tube

016070279
JEJ714: RNCC: 3 | RNVC: 2

30 May 2012

5975-01-607-0449
Electrical Equipment Mounting Base

016070449
RAM-D-271U-12: RNCC: 3 | RNVC: 2
433-8357167-315: RNCC: 3 | RNVC: 2
218081026: RNCC: 5 | RNVC: 2

30 May 2012

5975-01-603-7435
Electrical-Electronic Equipment Panel

016037435
68-08179-00: RNCC: 3 | RNVC: 2

14 Mar 2012

5975-01-602-2439
Junction Box Cover

016022439
M04540004: RNCC: 3 | RNVC: 2
M04540003: RNCC: 5 | RNVC: 9

28 Jan 2012

5975-01-610-0026
Flexible Metal Conduit Assembly

016100026
3260AS1328-43: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-610-4889
Electrical Nonmetallic Conduit Assembly

016104889
3260AS1328-28: RNCC: 3 | RNVC: 2
749-844-28: RNCC: 5 | RNVC: 2

20 Aug 2012

5975-01-610-4878
Electrical Nonmetallic Conduit Assembly

016104878
3260AS1328-68: RNCC: 3 | RNVC: 2
749-844-68: RNCC: 5 | RNVC: 2

20 Aug 2012

5975-01-609-8545
Flexible Metal Conduit Assembly

016098545
4G14174-103A: RNCC: 3 | RNVC: 2

4 Aug 2012

5975-01-611-0127
Rigid Nonmetallic Conduit

016110127
4G13039-103A: RNCC: 3 | RNVC: 2

4 Sep 2012

5975-01-611-9165
Junction Box

016119165
106A0424: RNCC: 3 | RNVC: 2

27 Sep 2012

5975-01-612-4986
Ground Rod

016124986
AA55804-3-B: RNCC: 3 | RNVC: 2
AA55804-3-B: RNCC: 5 | RNVC: 9

12 Oct 2012

5975-01-612-9446
Flexible Nonmetallic Conduit

016129446
LCP-2000-50: RNCC: 3 | RNVC: 2
3867988: RNCC: 5 | RNVC: 9
3867988: RNCC: 7 | RNVC: 2

25 Oct 2012

5975-01-613-2784
Electrical Conduit Adapter

016132784
STR38: RNCC: 3 | RNVC: 2
535-07032-00: RNCC: 5 | RNVC: 2

5 Nov 2012

5975-01-616-6318
Electrical-Electronic Equipment Panel

016166318
104100-100: RNCC: 3 | RNVC: 2
104100-100: RNCC: 5 | RNVC: 2

22 Feb 2013

5975-01-617-2462
Electrical Equipment Cabinet

016172462
175STDD5418ZX: RNCC: 3 | RNVC: 2
13530274-7: RNCC: 7 | RNVC: 2

18 Mar 2013

5975-01-618-7014
Electrical Equipment Mounting Base

016187014
22011M1200-01: RNCC: 3 | RNVC: 2
22011M1200-01: RNCC: 3 | RNVC: 9
22011M1200-01: RNCC: 5 | RNVC: 2

2 May 2013

5975-01-619-8364
Electrical Standardized Components Case

016198364
1-15151-MCM: RNCC: 3 | RNVC: 9

19 Jun 2013

5975-01-620-0918
Junction Box Cover

016200918
FGV-1DCV: RNCC: 3 | RNVC: 2
WP26: RNCC: 5 | RNVC: 2
RW51040: RNCC: 5 | RNVC: 2
RW51040: RNCC: 5 | RNVC: 2
11B294135: RNCC: 5 | RNVC: 2
WP26V: RNCC: 5 | RNVC: 9

1 Jul 2013

5975-01-620-5953
Chassis Base

016205953
403-6486-02: RNCC: 3 | RNVC: 2
403-6486-02: RNCC: 3 | RNVC: 9

31 Jul 2013

5975-01-633-2765
Electrical Components Tie Down Strap

016332765
JTN 500: RNCC: 3 | RNVC: 2
1212480: RNCC: 5 | RNVC: 2

17 Nov 2014

5975-01-633-8674
Chassis Base

016338674
14022-0023-01: RNCC: 3 | RNVC: 2
D14021-0008-AD02 REF 1: RNCC: 5 | RNVC: 2

8 Dec 2014

5975-01-641-2887
Electrical-Electronic Equipment Panel

016412887
DP1-RJ45-R-24LS: RNCC: 3 | RNVC: 2

15 Jan 2015

5975-01-644-0547
Electrical Cable Protector

016440547
YJ3TL-225: RNCC: 3 | RNVC: 9

21 Apr 2015

5975-01-645-5370
Electrical Wall Plate

016455370
TP7207: RNCC: 3 | RNVC: 2

19 Jun 2015

5975-01-645-5937
Con Sleeve Anchor

016455937
92405A300: RNCC: 3 | RNVC: 2
92405A300: RNCC: 5 | RNVC: 2

23 Jun 2015

5975-01-648-4309
Electrical Equipment Mounting Base

016484309
8522103: RNCC: 3 | RNVC: 2

24 Sep 2015

5975-01-621-3445
Electrical Components Tie Down Strap

016213445
BACS38K5: RNCC: 3 | RNVC: 2
BACS38K5: RNCC: 5 | RNVC: 2
BACS38K5: RNCC: 5 | RNVC: 2

4 Sep 2013

5975-01-623-1875
Electrical Cable Protector

016231875
12545577: RNCC: 3 | RNVC: 2

4 Nov 2013

5975-01-625-1516
Cable Marker Sleeve

016251516
S100X225YAJ: RNCC: 3 | RNVC: 2
516958-3: RNCC: 7 | RNVC: 2
516958: RNCC: D | RNVC: 9

27 Jan 2014

5975-01-624-4471
Blank Panel

016244471
4079389-0501: RNCC: 3 | RNVC: 2

2 Jan 2014

5975-01-625-7397
Electrical Cable Protector

016257397
12023A7001: RNCC: 3 | RNVC: 2

13 Feb 2014

5975-01-628-0949
Interconnecting Box Cover

016280949
8330-G501: RNCC: 3 | RNVC: 2
8454-G501ITEM3: RNCC: 5 | RNVC: 2

8 May 2014

5975-01-630-9157
Electrical Cable Nipple

016309157
15324973: RNCC: 3 | RNVC: 2
12048086: RNCC: 5 | RNVC: 9

22 Aug 2014

5975-01-678-0802
Electrical Equipment Mounting Base

016780802
12172-1600-03: RNCC: 3 | RNVC: 2
12172-1600-03: RNCC: 3 | RNVC: 9

18 Jan 2019

5975-01-667-4248
Junction Box

016674248
9003-1: RNCC: 3 | RNVC: 2

17 Oct 2017

5975-01-667-8324
Blank Panel

016678324
246628: RNCC: 3 | RNVC: 9
MIL246628: RNCC: 5 | RNVC: 2

1 Nov 2017

5975-01-668-4731
Electrical Wall Plate

016684731
AL3346G: RNCC: 3 | RNVC: 2

24 Nov 2017

5975-01-671-2156
Mounting Plate

016712156
704AS4061: RNCC: 3 | RNVC: 2
704AS4061: RNCC: 5 | RNVC: 2

20 Mar 2018

5975-01-670-0025
Electrical Equipment Rack

016700025
SRC2541B: RNCC: 3 | RNVC: 2

31 Jan 2018

5975-01-669-5179
Mounting Plate

016695179
13716232: RNCC: 3 | RNVC: 2

10 Jan 2018

5975-01-672-2953
Electrical-Electronic Equipment Panel

016722953
530-000256-001: RNCC: 3 | RNVC: 2
530-000256-001: RNCC: 5 | RNVC: 2

26 Apr 2018

5975-01-674-1015
Electrical Cable Protector

016741015
12546116: RNCC: 3 | RNVC: 2

12 Jul 2018

5975-01-652-9831
Electrical Wall Plate

016529831
800-011279-1: RNCC: 3 | RNVC: 1

9 Mar 2016

5975-01-653-9114
Cable Marker Sleeve

016539114
PSHT-375-1-WT: RNCC: 3 | RNVC: 2

11 Apr 2016

5975-01-654-0822
Electrical Equipment Foot

016540822
452.2-25-13-1/4-55: RNCC: 3 | RNVC: 2

18 Apr 2016

5975-01-657-4473
Electrical Conduit Adapter

016574473
M24758-4BL: RNCC: 3 | RNVC: 2

15 Aug 2016

5975-01-657-6891
Electrical Components Tie Down Strap

016576891
WBW25STTRC-VTD: RNCC: 3 | RNVC: 2

25 Aug 2016

5975-01-660-1305
Electrical-Electronic Equipment Panel

016601305
04-21279: RNCC: 3 | RNVC: 2
04-21279: RNCC: 3 | RNVC: 9
A029Y674: RNCC: 5 | RNVC: 2

6 Jan 2017

5975-01-660-5868
Cable Hanger

016605868
808-7069263-WW-0057: RNCC: 3 | RNVC: 2
302-8543641ITEM 30: RNCC: 5 | RNVC: 2

25 Jan 2017

5975-01-661-1984
Conduit Outlet Cover

016611984
217-7324506ITEM69: RNCC: 1 | RNVC: 2
390G: RNCC: 3 | RNVC: 2

22 Feb 2017

5975-01-661-7298
Interconnecting Box

016617298
81793F01: RNCC: 3 | RNVC: 2
81793002: RNCC: 5 | RNVC: 9
81793001: RNCC: 5 | RNVC: 9
4325492: RNCC: 7 | RNVC: 2

14 Mar 2017

5975-01-665-7952
Electrical Equipment Mounting Base

016657952
410-113-186: RNCC: 3 | RNVC: 2

14 Aug 2017

5975-01-690-4506
Electrical-Electronic Equipment Panel

016904506
930-31382: RNCC: 3 | RNVC: 2

12 Aug 2020

5975-01-693-8813
Cable Marker Sleeve

016938813
SM3-23-1/2-BLACK: RNCC: 3 | RNVC: 2
1083023: RNCC: 5 | RNVC: 9

9 Mar 2021

5975-01-694-2537
Electrical Equipment Rack

016942537
505M/0141: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-685-3824
Cable Marker Sleeve

016853824
TMS-SCE-2X-3/8-4: RNCC: 3 | RNVC: 2
C-MDC160002: RNCC: D | RNVC: 9

13 Dec 2019

5975-01-576-6130
Electrical Equipment Rack

015766130
4284561: RNCC: 3 | RNVC: 2
4284561: RNCC: 5 | RNVC: 2

7 Aug 2009

5975-01-576-8268
Electrical Equipment Rack

015768268
12505987-010: RNCC: 3 | RNVC: 2
12505987-010: RNCC: 5 | RNVC: 2

17 Aug 2009

5975-01-576-8301
Electrical Equipment Rack

015768301
12505987-012: RNCC: 3 | RNVC: 2

17 Aug 2009

5975-01-596-1327
Nonmetallic Raceway

015961327
2009MK5E-01-010: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-597-1636
Electrical Equipment Rack

015971636
34190A: RNCC: 3 | RNVC: 2
34190A: RNCC: 3 | RNVC: 9

31 May 2011

5975-01-598-5681
Flexible Metal Conduit

015985681
600232-3: RNCC: 3 | RNVC: 2
FF-18502PC19: RNCC: 5 | RNVC: 2

12 Aug 2011

5975-01-607-2018
Flexible Nonmetallic Conduit

016072018
7609K401: RNCC: 3 | RNVC: 2

5 Jun 2012

5975-01-606-6142
Rigid Metal Conduit

016066142
T4G04103-111A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-600-2810
Electrical Conductor Bushing

016002810
10008788: RNCC: 1 | RNVC: 2
2922NM: RNCC: 3 | RNVC: 2

21 Nov 2011

5975-01-608-3688
Electrical Equipment Mounting Base

016083688
901-060-335-106: RNCC: 3 | RNVC: 2

25 Jun 2012

5975-01-666-3424
Electrical Conduit Coupling Nut Clamp

016663424
MC-046516: RNCC: 3 | RNVC: 2
97-3899ITEM208: RNCC: 5 | RNVC: 2
97-3899: RNCC: D | RNVC: 9

1 Sep 2017

5975-01-666-8028
Metal Sleeve

016668028
506-BSN14: RNCC: 3 | RNVC: 2

21 Sep 2017

5975-01-666-9181
Cable Strain Relief Bushing

016669181
M3200: RNCC: 3 | RNVC: 2

26 Sep 2017

5975-01-667-7677
Electrical Conduit Elbow

016677677
01D3174H03: RNCC: 1 | RNVC: 2
M24758-4 C: RNCC: 3 | RNVC: 2

30 Oct 2017

5975-01-670-0209
Mounting Plate

016700209
RDQUICKRLSE: RNCC: 3 | RNVC: 9
B06Y62W1KG: RNCC: 5 | RNVC: 9
A3380534 ITEM 35: RNCC: C | RNVC: 1

1 Feb 2018

5975-01-681-3143
Electrical Wall Plate

016813143
10023: RNCC: 3 | RNVC: 2
845-4687686 ITEM 24-3: RNCC: C | RNVC: 1
845-4687686: RNCC: D | RNVC: 9

12 Jun 2019

5975-01-667-8033
Electrical-Electronic Equipment Chassis

016678033
252177: RNCC: 3 | RNVC: 9
MIL252177: RNCC: 5 | RNVC: 2

31 Oct 2017

5975-01-660-1686
Electrical Components Tie Down Strap

016601686
SS7070B0588: RNCC: 3 | RNVC: 2

9 Jan 2017

5975-01-661-5391
Electrical Tie Down Mounting Base

016615391
71-513365-1: RNCC: 1 | RNVC: 2
08461: RNCC: 3 | RNVC: 2
71-513365-1: RNCC: 5 | RNVC: 9

7 Mar 2017

5975-01-661-6174
Electrical-Electronic Equipment Panel

016616174
0405-9334: RNCC: 3 | RNVC: 2
04-21285: RNCC: 7 | RNVC: 2

9 Mar 2017

5975-01-663-6870
Electrical-Electronic Equipment Chassis

016636870
11472583-1: RNCC: 3 | RNVC: 2
11472583-1: RNCC: 3 | RNVC: 9
11472583: RNCC: 7 | RNVC: 2

18 May 2017

5975-01-650-2628
Couple Mount Assy

016502628
7-511113601-101: RNCC: 3 | RNVC: 2

24 Nov 2015

5975-01-650-5379
Electrical Wall Plate

016505379
CCB: RNCC: 3 | RNVC: 2

8 Dec 2015

5975-01-651-6637
Electronic Equipment Mounting Tray

016516637
901-370-345-763: RNCC: 3 | RNVC: 2

26 Jan 2016

5975-01-651-9770
Line Supporting Strap

016519770
601-040: RNCC: 3 | RNVC: 2

5 Feb 2016

5975-01-652-1361
Metallic Raceway

016521361
4043179C1: RNCC: 3 | RNVC: 2

10 Feb 2016

5975-01-652-0839
Electrical Cable Protector

016520839
12584373: RNCC: 3 | RNVC: 2

9 Feb 2016

5975-01-652-8278
Switch Terminal Cover

016528278
411T1124-22B: RNCC: 3 | RNVC: 1

5 Mar 2016

5975-01-652-6795
Electrical Tie Down Mounting Base

016526795
ABM100-AT-C0: RNCC: 3 | RNVC: 2
MB4A0A2H4: RNCC: 3 | RNVC: 2
17-3-4131-1: RNCC: 7 | RNVC: 2

1 Mar 2016

5975-01-652-0842
Electrical Equipment Rack Base

016520842
12584390: RNCC: 3 | RNVC: 2

9 Feb 2016

5975-01-653-2192
Electrical Components Tie Down Strap

016532192
635745680: RNCC: 3 | RNVC: 2
3895T12: RNCC: 5 | RNVC: 2
9752-0056: RNCC: 7 | RNVC: 2

15 Mar 2016

5975-01-674-9218
Blank Panel

016749218
FP1902U: RNCC: 3 | RNVC: 2

15 Aug 2018

5975-01-543-9015
Strain Electrical Conductor Clamp

015439015
30-302-2D10G08: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-553-2120
Electrical Tie Down Mounting Base

015532120
21677-0770: RNCC: 3 | RNVC: 9

10 Jul 2007

5975-01-553-4151
Junction Box

015534151
11058-5200-01: RNCC: 3 | RNVC: 2
79L0059-00: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-553-9485
Electrical-Electronic Equipment Chassis

015539485
42240712: RNCC: 3 | RNVC: 2
42240712: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-554-6835
Electrical-Electronic Equipment Panel

015546835
GW 1124-01: RNCC: 3 | RNVC: 2

16 Aug 2007

5975-01-555-1269
Electrical-Electronic Equipment Panel

015551269
04-0150-001: RNCC: 3 | RNVC: 2
BPMI07-5051-01: RNCC: 5 | RNVC: 2

30 Aug 2007

5975-01-554-8015
Electrical Components Tie Down Strap

015548015
18106: RNCC: 3 | RNVC: 2
18106-6: RNCC: 5 | RNVC: 9
3003385: RNCC: 7 | RNVC: 2

20 Aug 2007

5975-01-555-8280
Cable Collar

015558280
BB-A40-1001: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-556-3662
Electrical Wall Plate

015563662
4287375: RNCC: 3 | RNVC: 2
4287375: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-557-0996
Flexible Nonmetallic Conduit

015570996
0708160: RNCC: 3 | RNVC: 2
12759-00699: RNCC: C | RNVC: 1

11 Oct 2007

5975-01-557-4825
Cable Hanger

015574825
7607321-0026: RNCC: 3 | RNVC: 2
200-8180879 ITEM 12: RNCC: 5 | RNVC: 1
200-7607321 ITEM 26: RNCC: 5 | RNVC: 2

24 Oct 2007

5975-01-557-4048
Rigid Metal Conduit

015574048
31169-1482: RNCC: 3 | RNVC: 2

22 Oct 2007

5975-01-558-9835
Rigid Metal Conduit

015589835
A-A-50553-12P202A: RNCC: 2 | RNVC: 2
A-A-50553-12M202A: RNCC: 5 | RNVC: 9

3 Dec 2007

5975-01-559-3094
Insulator Pin

015593094
7002748-1: RNCC: 3 | RNVC: 9
7002748-1: RNCC: 5 | RNVC: 9

12 Dec 2007

5975-01-559-3505
Insulator Pin

015593505
7002750-1: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-560-0871
Electrical Components Tie Down Strap

015600871
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-1-0: RNCC: 3 | RNVC: 2
AS33671-1-0: RNCC: 3 | RNVC: 9

15 Jan 2008

5975-01-562-9699
Blank Panel

015629699
A3256632-1: RNCC: 3 | RNVC: 2
A3256632: RNCC: D | RNVC: 9

28 Apr 2008

5975-01-563-0146
Ground Rod

015630146
A3020618-001: RNCC: 3 | RNVC: 2

29 Apr 2008

5975-01-563-3002
Metallic Raceway

015633002
13014404: RNCC: 3 | RNVC: 2
456720102007: RNCC: 6 | RNVC: 9

7 May 2008

5975-01-565-0381
Electrical Fitting Mounting Base

015650381
12-10609M: RNCC: 3 | RNVC: 2

9 Jul 2008

5975-01-565-2174
Electrical-Electronic Equipment Chassis

015652174
70902-01133-041: RNCC: 3 | RNVC: 2

16 Jul 2008

5975-01-565-2841
Electrical Box Connector

015652841
10B7965: RNCC: 3 | RNVC: 2
1682180000: RNCC: 3 | RNVC: 9
7709E95: RNCC: 5 | RNVC: 1

18 Jul 2008

5975-01-566-0826
Electrical Equipment Rack Base

015660826
1756-A10/B: RNCC: 3 | RNVC: 2
015654: RNCC: 5 | RNVC: 2
7709E62-ITEM78: RNCC: 5 | RNVC: 2

19 Aug 2008

5975-01-576-7250
Electrical Equipment Rack

015767250
12505987-003: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-577-7246
Electrical Wall Plate

015777246
10002186: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-581-6701
Electrical Grounding Plate

015816701
03002A1800-1: RNCC: 3 | RNVC: 2

25 Jan 2010

5975-01-583-6019
Electrical Equipment Leg

015836019
3861222: RNCC: 3 | RNVC: 2
3861222: RNCC: 5 | RNVC: 9

30 Mar 2010

5975-01-584-4246
Electrical Grounding Plate

015844246
2107: RNCC: 3 | RNVC: 9
10003040: RNCC: 5 | RNVC: 2
2107: RNCC: 5 | RNVC: 2

26 Apr 2010

5975-01-573-3557
Electrical Wall Plate

015733557
ECP001: RNCC: 3 | RNVC: 2

17 Apr 2009

5975-01-572-2530
Flexible Nonmetallic Conduit

015722530
8C-5064: RNCC: 3 | RNVC: 2
8KP117: RNCC: 5 | RNVC: 2
8C-5064: RNCC: 5 | RNVC: 9
8KP117: RNCC: 5 | RNVC: 9

4 Mar 2009

5975-01-572-3044
Electrical Cable Assembly Protector

015723044
1452190W: RNCC: 3 | RNVC: 2
1452190W: RNCC: 5 | RNVC: 9

5 Mar 2009

5975-01-568-5165
Flexible Nonmetallic Conduit

015685165
13213028-1: RNCC: 3 | RNVC: 2

3 Nov 2008

5975-01-571-4416
Cable Marker Sleeve

015714416
SS7074-4558: RNCC: 3 | RNVC: 2
SS7074-4558: RNCC: 5 | RNVC: 2
SS7074: RNCC: D | RNVC: 9

4 Feb 2009

5975-01-569-5301
Electrical Wall Plate

015695301
63-0343: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-568-6076
Metallic Raceway

015686076
3689937C2L: RNCC: 3 | RNVC: 2

4 Nov 2008

5975-01-576-6186
Blank Panel

015766186
PBPA19007BK2: RNCC: 3 | RNVC: 2
0210551 REV B FIND 5: RNCC: 5 | RNVC: 9

10 Aug 2009

5975-01-593-9046
Electrical-Electronic Equipment Chassis

015939046
269A274-1: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-595-5003
Electrical Tie Down Mounting Base

015955003
CB4020G3N8-750: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-596-0987
Electrical Tie Down Mounting Base

015960987
CB4020G3N16-750: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-595-5767
Electrical Components Tie Down Strap

015955767
71295K64-GREEN: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-593-8710
Ground Rod Section

015938710
LPIAHS0257: RNCC: 3 | RNVC: 2
LPIAHS0257: RNCC: 5 | RNVC: 9

20 Apr 2011

5975-01-596-6896
Metallic Raceway

015966896
12517978: RNCC: 3 | RNVC: 2
12517978: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-6919
Electrical Grounding Plate

015966919
03002A1800-3: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-586-0412
Electrical Components Tie Down Strap

015860412
10015282: RNCC: 1 | RNVC: 2
CBR1M-MO: RNCC: 3 | RNVC: 2
10015282: RNCC: 5 | RNVC: 1

16 Jun 2010

5975-01-586-4149
Electrical Grounding Plate

015864149
PK32DGTA: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-588-4134
Seat And Gland Assy

015884134
41011009-101: RNCC: 3 | RNVC: 2

16 Sep 2010

5975-01-586-6059
Junction Box

015866059
6XC79: RNCC: 3 | RNVC: 2
6XC79: RNCC: 5 | RNVC: 9

7 Jul 2010

5975-01-588-4471
Electrical Tie Down Mounting Base

015884471
CB4020G5N6: RNCC: 3 | RNVC: 2

18 Sep 2010

5975-01-588-6583
Insulator Bracket Strap

015886583
12490050: RNCC: 3 | RNVC: 2

28 Sep 2010

Load More Results