What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 85 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 85 of 176

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

5975-00-010-6522
Ground Rod

1 May 1968

5975-00-010-5366

1 Jan 1900

5975-00-009-9638
Electrical Equipment Cabinet

000099638
21701: RNCC: 3 | RNVC: 2

11 Aug 1972

5975-00-009-8810
Electrical Box Connector

000098810
ST-2: RNCC: 3 | RNVC: 2
11176200: RNCC: 5 | RNVC: 1
11176200-1: RNCC: 7 | RNVC: 2

11 Aug 1972

5975-00-009-8797
Electrical Equipment Rack

000098797
64000001-006: RNCC: 3 | RNVC: 2
64000001-006: RNCC: 5 | RNVC: 9

11 Aug 1972

5975-00-009-7022
Reducer

1 Jan 1900

5975-00-009-7018
Fitting

1 Jan 1900

5975-00-009-7019
Fitting

29 Jul 1972

5975-00-009-7023
Adapter

1 Jan 1900

5975-00-009-7021
Tee

1 Jan 1900

5975-00-009-7014

29 Jul 1972

5975-00-009-7016
Elbow

1 Jan 1900

5975-00-009-7017
Reducer

1 Jan 1900

5975-00-009-7015
Elbow

1 Jan 1900

5975-00-009-5087

2 Aug 1972

5975-00-009-4844

1 Jan 1900

5975-00-009-4845
Electrical Components Tiedown Strap

1 Jan 1900

5975-00-009-4847

1 Jan 1900

5975-00-009-4842
Electrical Components Tiedown Strap

1 Jan 1900

5975-00-009-4319
Indexing Key

000094319
304055: RNCC: 3 | RNVC: 2

2 Aug 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

5975-00-008-7464
Electrical Conduit Nipple

1 Jan 1900

5975-00-008-7466
Electrical Conduit Nipple

19 Jul 1972

5975-00-008-7465
Electrical Conduit Nipple

19 Jul 1972

5975-00-008-7119
Transformer Clamp

1 Jan 1900

5975-00-008-5101
Electrical Conduit-Connector

21 Jul 1972

5975-00-008-5066
Electrical Conduit Nipple

1 Jan 1900

5975-00-008-4622

1 Jan 1900

5975-00-008-4624

1 Jan 1900

5975-00-008-4621

1 Jan 1900

5975-00-008-4113
Flexible Metal Conduit

19 Jul 1972

5975-00-007-9744
Dust And Moisture Seal Boot

1 Jan 1900

5975-00-007-9358

1 Jan 1900

5975-00-007-8897

1 Jan 1900

5975-00-007-8115
Electrical-Electronic Equipment Chassis

14 Jul 1972

5975-00-007-5302

1 Jan 1900

5975-00-007-5161
Electrical Cable Nipple

6 Jul 1972

5975-00-007-4132
Electrical-Electronic Equipment Chassis

000074132
109958: RNCC: 3 | RNVC: 2

7 Jul 1972

5975-00-007-3655

1 Jan 1900

5975-00-007-3654
Junction Box

6 Jul 1972

5975-00-007-3497
Blank Panel

30 Jun 1972

5975-00-007-2640
Flexible Metal Conduit Assembly

1 Jan 1900

5975-00-007-2628

1 Jan 1900

5975-00-007-2078
Cable Hanger

000072078
109798-1: RNCC: 3 | RNVC: 2

6 Jul 1972

5975-00-007-1320

1 Jan 1900

5975-00-007-1219

1 Jan 1900

5975-00-007-1220

1 Jan 1900

5975-00-007-1177
Dust And Moisture Seal Boot

1 Jan 1900

5975-00-006-9994
Electrical Grounding Plate

1 Jan 1900

5975-00-006-9705
Conduit Outlet Cover

1 Jan 1900

5975-00-006-9326

1 Jan 1900

5975-00-006-8924
Electrical Equipment Mounting Base

30 Jun 1972

5975-00-006-6383

1 Jan 1900

5975-00-006-5965
Electrical Cable Tray

23 Jun 1972

5975-00-006-5360
Electrical Equipment Mounting Base

23 Jun 1972

5975-00-006-3169
Strain Relief Cable Clamp

000063169
18D690: RNCC: 3 | RNVC: 2
CD21544: RNCC: 3 | RNVC: 2

23 Jun 1972

5975-00-006-1677

1 Jan 1900

5975-00-006-0354

1 Jan 1900

5975-00-006-0355
Outlet Cover

14 Jun 1972

5975-00-005-6817
Electrical Conduit Elbow

9 Jun 1972

5975-00-005-3745

1 Jan 1900

5975-00-005-3411
Electrical-Electronic Eq Chassis

14 Jun 1972

5975-00-005-1911

1 Jan 1900

5975-00-004-9114
Firing Circuit Conduit Assembly

14 Jun 1972

5975-00-004-4541
Electrical Components Tiedown Strap

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

5975-00-004-1047
Conduit Outlet

27 May 1972

5975-00-003-8591
Electrical Cable Nipple

1 Jan 1900

5975-00-003-8594
Stuffing Tube

000038594
DBZP716S169: RNCC: 3 | RNVC: 2

27 May 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

5975-00-003-4573
Electrical Equipment Mounting Base

000034573
2612799G001: RNCC: 3 | RNVC: 2

14 May 1972

5975-00-003-4572
Electrical Equipme Mounting Base

1 Jan 1900

5975-00-003-4574
Electrical Equipment Mounting Base

000034574
2612796G001: RNCC: 3 | RNVC: 2

14 May 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

5975-00-001-6906
Blank Panel

000016906
54000-40077: RNCC: 3 | RNVC: 2

29 Sep 1972

5975-00-001-6532
Stuffing Tube Body

000016532
SS600-2477146MX2327U: RNCC: 3 | RNVC: 2

29 Sep 1972

5975-00-001-6426
Interconnecting Box

000016426
50-345644: RNCC: 3 | RNVC: 2

4 Oct 1972

5975-00-001-5534
Electrical Box Connector

000015534
3304M: RNCC: 3 | RNVC: 2
3304M: RNCC: 5 | RNVC: 2
906T: RNCC: 5 | RNVC: 2

29 Sep 1972

5975-00-001-2444
Blank Panel

000012444
54000-40078: RNCC: 3 | RNVC: 2

24 Sep 1972

5975-00-001-1538

1 Jan 1900

5975-00-001-1542
Line Supporting Strap

1 Jan 1900

5975-00-001-1539

1 Jan 1900

5975-00-000-7420

1 Jan 1900

5975-00-000-0126
Electrical-Electronic Equipment Chassis

000000126
685129-2: RNCC: 3 | RNVC: 2

15 Apr 1976

5975-01-586-9422
Chassis Base

015869422
MP-2100_SPA/115/R/2UTP: RNCC: 3 | RNVC: 2
MP-2100_SPA/115/R/2UTP: RNCC: 3 | RNVC: 2
MP-2100-SPA/115/R/2UTP: RNCC: 3 | RNVC: 2
MP-2100-SPA/115/R/2UTP: RNCC: 3 | RNVC: 2

20 Jul 2010

5975-00-079-4169
Electrical Entrance Cap

000794169
268: RNCC: 3 | RNVC: 1
1533: RNCC: 3 | RNVC: 2
SH-309: RNCC: 5 | RNVC: 9
FB-796: RNCC: 5 | RNVC: 9
2314: RNCC: 5 | RNVC: 9
17-350: RNCC: 5 | RNVC: 9
378: RNCC: 5 | RNVC: 9
318: RNCC: 5 | RNVC: 9
FB-796: RNCC: 5 | RNVC: 9
17-350G: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-706-1897
Electrical Equipment Cabinet

017061897
3995AS2001-2: RNCC: 3 | RNVC: 2

7 Nov 2022

5975-01-706-2989
Electrical Conduit Wye

017062989
713-351NF17: RNCC: 3 | RNVC: 2

15 Nov 2022

5975-01-706-3355
Electrical Conduit Locknut

017063355
142: RNCC: 3 | RNVC: 2
17-80394-02: RNCC: 7 | RNVC: 2
17-80394: RNCC: D | RNVC: 9

16 Nov 2022

5975-01-709-1097
Ground Rod

017091097
300.118: RNCC: 3 | RNVC: 2

11 May 2023

5975-01-708-0933
Electrical Cable Protector

017080933
7378037: RNCC: 3 | RNVC: 2

15 Mar 2023

5975-01-698-8898
Control Head

016988898
STEE22BK-X4P: RNCC: 3 | RNVC: 2
STEE22BK-X1: RNCC: 3 | RNVC: 9

17 Dec 2021

5975-00-085-3337
Electrical Box Connector

000853337
7488: RNCC: 3 | RNVC: 1
2112: RNCC: 3 | RNVC: 1
XC-408: RNCC: 3 | RNVC: 1
277: RNCC: 3 | RNVC: 2
01208: RNCC: 5 | RNVC: 9
C-17-M: RNCC: 5 | RNVC: 9
SP6130: RNCC: 5 | RNVC: 9
418: RNCC: 5 | RNVC: 9
24-300: RNCC: 5 | RNVC: 9
1009: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-708-4007
Electrical Equipment Cabinet

017084007
A202006LP: RNCC: 3 | RNVC: 2

4 Apr 2023

5975-01-707-8560
Junction Box

017078560
58361: RNCC: 3 | RNVC: 2
5613-638-001 REVI SH9 ITEM # 14A: RNCC: C | RNVC: 1
5613-638-001: RNCC: D | RNVC: 9

27 Feb 2023

5975-01-708-1808
Junction Box

017081808
12603854: RNCC: 3 | RNVC: 2
12603854: RNCC: C | RNVC: 1

20 Mar 2023

5975-00-903-8857
Electrical Conduit Adapter

009038857
TWAD100: RNCC: 3 | RNVC: 9
2064: RNCC: 5 | RNVC: 2
TA-103: RNCC: 5 | RNVC: 2
1100A: RNCC: 5 | RNVC: 9
787: RNCC: 5 | RNVC: 9
683: RNCC: 5 | RNVC: 9
1143: RNCC: 5 | RNVC: 9
80T62: RNCC: E | RNVC: 8
65907: RNCC: E | RNVC: 8

1 Jan 1960

5975-01-706-6704
Cable Strain Relief Bushing

017066704
FPPG21G: RNCC: 3 | RNVC: 2
CC-PG21-G: RNCC: 5 | RNVC: 2

12 Dec 2022

5975-01-706-5292
30 Immersion Heater

017065292
TMO-15-030P-E2T2XX 30KW2-3PH: RNCC: 3 | RNVC: 2
1061735: RNCC: 5 | RNVC: 2
PCN: 830274: RNCC: 5 | RNVC: 2

4 Dec 2022

5975-01-708-3625
Cable Marker Sleeve

017083625
PS-C-750-BK: RNCC: 3 | RNVC: 2

31 Mar 2023

5975-01-708-2652
Electrical Box Connector

017082652
2250: RNCC: 3 | RNVC: 2

25 Mar 2023

5975-01-708-3404
Electrical Conduit Locknut

017083404
7TAD012030R0000: RNCC: 3 | RNVC: 2
141SST: RNCC: 5 | RNVC: 2

30 Mar 2023

5975-01-708-8376
Cable Marker Sleeve

017088376
PS-250-2-RD: RNCC: 3 | RNVC: 2

26 Apr 2023

5975-01-706-4832
Electrical Equipment Rack Base

017064832
1025015G-1: RNCC: 3 | RNVC: 2
PL1025015G-1: RNCC: D | RNVC: 9
1025015G: RNCC: D | RNVC: 9

30 Nov 2022

5975-00-958-9712
Metallic Raceway

009589712
5C64: RNCC: 3 | RNVC: 9
5C63: RNCC: E | RNVC: 8

1 Jan 1962

5975-01-048-4742
Electrical Conduit Locknut

010484742
GL250: RNCC: 3 | RNVC: 2
1250: RNCC: 3 | RNVC: 2
LG-407: RNCC: 5 | RNVC: 2
10606: RNCC: 5 | RNVC: 9
400-110-M: RNCC: 5 | RNVC: 9
127: RNCC: 5 | RNVC: 9
107: RNCC: 5 | RNVC: 9
GL-700: RNCC: 5 | RNVC: 9
GL250: RNCC: 5 | RNVC: 9
GL17: RNCC: 5 | RNVC: 9

26 Sep 1977

5975-01-034-5538
Electrical Cable Protector

010345538
M24705/1BN2005: RNCC: 2 | RNVC: 2
M24705/1-BN2005: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
20/5: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9
20/5: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-702-0000
Electrical Cable Protector

017020000
12596912: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-707-7821
Cable Hanger

017077821
19007-112: RNCC: 3 | RNVC: 2

22 Feb 2023

5975-01-703-1480
Electrical Cable Protector

017031480
12675033-201: RNCC: 3 | RNVC: 2

19 Aug 2022

5975-01-698-8268
Flexible Nonmetallic Conduit

016988268
WL923-BK-10: RNCC: 3 | RNVC: 2

13 Dec 2021

5975-01-702-9597
Mounting Plate

017029597
8818540: RNCC: 3 | RNVC: 2
8818540: RNCC: 5 | RNVC: 2

9 Aug 2022

5975-01-702-9599
Stuffing Tube

017029599
630A007MT143D: RNCC: 3 | RNVC: 2

9 Aug 2022

5975-01-708-1157
Electrical Fitting Mounting Base

017081157
MB4SHA0C2: RNCC: 3 | RNVC: 2

15 Mar 2023

5975-01-674-4100
Electrical Equipment Mounting Base

016744100
108914: RNCC: 3 | RNVC: 2
10762092-001: RNCC: 5 | RNVC: 2
952006: RNCC: 7 | RNVC: 2

25 Jul 2018

5975-01-685-7199
Electronic Equipment Mounting Tray

016857199
JL088A: RNCC: 3 | RNVC: 2
6213.3578.00: RNCC: 5 | RNVC: 2

9 Jan 2020

5975-01-534-8245
Electrical-Electronic Equipment Chassis

015348245
FXKIT0102: RNCC: 3 | RNVC: 2
10-5500-3-J ITEMNO 9: RNCC: 5 | RNVC: 1
10-5500-3 L ITEM NO 9: RNCC: 5 | RNVC: 1
10-5500-3-G ITEMNO 9: RNCC: 5 | RNVC: 1
10-5500-3-H ITEMNO 9: RNCC: 5 | RNVC: 1
10-5500-3-B ITEMNO 9: RNCC: 5 | RNVC: 2
10-5500-4 ITEM 29: RNCC: 5 | RNVC: 2
10-5500-3-A ITEM 9: RNCC: 5 | RNVC: 2
G-5357: RNCC: 5 | RNVC: 2
RME21-3B2-V021: RNCC: 5 | RNVC: 9

3 Nov 2005

5975-00-642-7263
Electrical Conduit Locknut

006427263
WF408TYPE12IN: RNCC: 2 | RNVC: 2
FEDSTD156: RNCC: 4 | RNVC: 1
SM-A-751501-2: RNCC: 5 | RNVC: 1
BL200: RNCC: 5 | RNVC: 1
S11559: RNCC: 5 | RNVC: 1
1008: RNCC: 5 | RNVC: 1
146: RNCC: 5 | RNVC: 2
146: RNCC: 5 | RNVC: 9
10806: RNCC: 5 | RNVC: 9
16: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-679-6400
Electrical-Electronic Equipment Chassis

016796400
C0940861-102: RNCC: 3 | RNVC: 2
C0940861-101: RNCC: 5 | RNVC: 9
C0940876: RNCC: 7 | RNVC: 2
C0940861: RNCC: 7 | RNVC: 2

4 Apr 2019

5975-01-081-6489
Electrical Equipment Mounting Base

010816489
622-4934-001: RNCC: 3 | RNVC: 2
MT-4935/ARC: RNCC: 5 | RNVC: 1
706A35402137: RNCC: 5 | RNVC: 2
757592995702: RNCC: 5 | RNVC: 9

18 Aug 1979

5975-01-703-1651
Drive Chassis Unit

017031651
8245529-1: RNCC: 3 | RNVC: 2
8245529-1: RNCC: 5 | RNVC: 2

20 Aug 2022

5975-01-702-7712
Flexible Metal Conduit Assembly

017027712
57350-14: RNCC: 3 | RNVC: 1

27 Jul 2022

5975-01-702-0219
Electrical Cable Ground Guard

017020219
12596901: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0230
Electrical Cable Ground Guard

017020230
12617731: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0296
Electrical Cable Protector

017020296
12596702: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-699-3117
Junction Box

016993117
8256727-1: RNCC: 3 | RNVC: 2
8256727-1: RNCC: 5 | RNVC: 2
PL8256727-1: RNCC: D | RNVC: 9

24 Jan 2022

5975-01-700-8564
Electrical Conduit Bushing

017008564
74D115176-2169: RNCC: 3 | RNVC: 2
74D115176: RNCC: D | RNVC: 9

18 Apr 2022

5975-01-700-8569
Electrical Conduit Bushing

017008569
74D115176-2165: RNCC: 3 | RNVC: 2
74D115176: RNCC: D | RNVC: 9

18 Apr 2022

5975-01-699-2013
Flexible Nonmetallic Conduit

016992013
740NF102NFA161A121-09-12: RNCC: 3 | RNVC: 2

14 Jan 2022

5975-01-702-0309
Electrical Cable Protector

017020309
12617965: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-5881
Chassis Base

017025881
142820: RNCC: 3 | RNVC: 2

15 Jul 2022

5975-01-700-3120
Mounting Plate

017003120
10088570: RNCC: 3 | RNVC: 2

23 Mar 2022

5975-01-699-1760
Junction Box

016991760
ED2PBXM: RNCC: 3 | RNVC: 2

13 Jan 2022

5975-01-698-6797
Electrical Box Connector

016986797
14250: RNCC: 3 | RNVC: 2
14250: RNCC: 5 | RNVC: 2
52562514: RNCC: D | RNVC: 9

2 Dec 2021

5975-01-698-6544
Electrical Equipment Rack

016986544
N105242-2: RNCC: 3 | RNVC: 2
N105242-2: RNCC: 5 | RNVC: 2
N105242: RNCC: D | RNVC: 9

1 Dec 2021

5975-01-698-5642
Electrical Equipment Rack

016985642
20710755-2: RNCC: 3 | RNVC: 2
20710755: RNCC: D | RNVC: 9

24 Nov 2021

5975-01-700-4890
Cable Hanger

017004890
CMH-1U-19-LB1: RNCC: 3 | RNVC: 2

30 Mar 2022

5975-01-700-3712
Electrical Equipment Rack

017003712
OEM-F8224-00: RNCC: 3 | RNVC: 2

25 Mar 2022

5975-01-701-6888
Chassis Base

017016888
182561: RNCC: 3 | RNVC: 2

1 Jun 2022

5975-01-699-0612
Electrical Cable Protector

016990612
4360290: RNCC: 3 | RNVC: 2

5 Jan 2022

5975-01-701-6878
Chassis Base

017016878
180051: RNCC: 3 | RNVC: 2

1 Jun 2022

5975-01-698-2817
Cable Marker Sleeve

016982817
8247203-24: RNCC: 3 | RNVC: 2
8247203 SHEET 5: RNCC: C | RNVC: 1
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-705-5445
Interconnecting Box

017055445
LM1-SMB-U40: RNCC: 3 | RNVC: 2

26 Sep 2022

5975-01-707-8348
Blank Panel

017078348
414051-001: RNCC: 3 | RNVC: 2

24 Feb 2023

5975-01-707-1095
Blank Panel

017071095
40304-074: RNCC: 3 | RNVC: 2

17 Jan 2023

5975-01-707-8319
Junction Box

017078319
WM 1244.250: RNCC: 3 | RNVC: 2

24 Feb 2023

5975-01-707-1108
Blank Panel

017071108
40304-076: RNCC: 3 | RNVC: 2

17 Jan 2023

5975-01-707-7769
Ground Rod

017077769
PE10: RNCC: 3 | RNVC: 2
BW00124: RNCC: 5 | RNVC: 2

22 Feb 2023

5975-01-034-5534
Electrical Cable Protector

010345534
M24705/1BN12090: RNCC: 2 | RNVC: 2
M24705/1-BN12090: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
SPR-M-120/90: RNCC: 5 | RNVC: 1
803-5001027: RNCC: 5 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
120/90: RNCC: 5 | RNVC: 9
120/90: RNCC: 5 | RNVC: 9
SPR-PM-120/90: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-706-9517
Flexible Nonmetallic Conduit

017069517
5651000503: RNCC: 3 | RNVC: 2
ROUNDIT 2000 5-0: RNCC: 5 | RNVC: 2

5 Jan 2023

5975-01-695-6504
Electrical Cable Nipple

016956504
455N8V14: RNCC: 3 | RNVC: 2
1722487: RNCC: 5 | RNVC: 2
23027307: RNCC: 5 | RNVC: 2
7423027307: RNCC: 5 | RNVC: 2

16 Jun 2021

5975-01-701-2860
Electrical Conduit Adapter

017012860
712-188-C-20-J: RNCC: 3 | RNVC: 2
70051885: RNCC: 5 | RNVC: 2

9 May 2022

5975-01-701-3359
Electrical Conduit Adapter

017013359
712-188-C-56-J: RNCC: 3 | RNVC: 2
70051888: RNCC: 5 | RNVC: 2

11 May 2022

5975-01-705-5153
Cable Marker Sleeve

017055153
TMS-SCE-1K-1/2-2.0-S3-9: RNCC: 3 | RNVC: 2

23 Sep 2022

5975-01-674-7465
Raceway Cover

016747465
EB3Z14A099M: RNCC: 3 | RNVC: 2
7423228779: RNCC: 5 | RNVC: 2
23228779: RNCC: 5 | RNVC: 2
EB3T14A099MA: RNCC: 5 | RNVC: 9

9 Aug 2018

5975-01-701-9459
Electrical Box Connector

017019459
717-509M80: RNCC: 3 | RNVC: 2
STD/0000107938: RNCC: 5 | RNVC: 1
70051838: RNCC: 5 | RNVC: 2

17 Jun 2022

5975-01-033-9757
Transit Compression Plate

010339757
M24705/1-CS1A: RNCC: 2 | RNVC: 2
M24705/1CS1A: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
STEEL COMPRESSION PLATE: RNCC: 5 | RNVC: 9
STEEL COMPRESSION PLATE: RNCC: 5 | RNVC: 9
MIL-P-24705: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-01-707-2714
Conduit Outlet Cover

017072714
97390: RNCC: 3 | RNVC: 2

25 Jan 2023

5975-01-707-5625
Electrical Equipment Rack

017075625
TS 8808.510: RNCC: 3 | RNVC: 2

9 Feb 2023

5975-01-707-0394
Electrical Equipment Rack

017070394
PS493B-100-100: RNCC: 3 | RNVC: 2

11 Jan 2023

5975-01-707-0285
Stuffing Tube

017070285
1002: RNCC: 3 | RNVC: 9

10 Jan 2023

5975-01-708-1302
Electrical Equipment Rack

017081302
011-04321-01: RNCC: 3 | RNVC: 2

16 Mar 2023

5975-01-707-8960
Electrical Box Connector

017078960
1501127302-E RWS: RNCC: 3 | RNVC: 2
4250184111603: RNCC: 5 | RNVC: 2

1 Mar 2023

5975-01-674-2161
Electrical Equipment Mounting Base

016742161
108909: RNCC: 3 | RNVC: 2
10762091-001: RNCC: 5 | RNVC: 2
952005: RNCC: 7 | RNVC: 2

17 Jul 2018

5975-00-045-1281
Electrical Equipment Cabinet

000451281
PMC1011: RNCC: 3 | RNVC: 2
CU2111A: RNCC: E | RNVC: 8

1 Jan 1961

5975-01-701-3072
Electrical Wall Plate

017013072
CA3102K105L3P: RNCC: 3 | RNVC: 2
CA3102K105L3P: RNCC: 5 | RNVC: 2

10 May 2022

5975-01-680-6475
Junction Box

016806475
ALN163609: RNCC: 3 | RNVC: 2
ALN 163609: RNCC: 5 | RNVC: 2

15 May 2019

5975-01-653-7138
Electrical-Electronic Equipment Chassis

016537138
C7000: RNCC: 3 | RNVC: 2
VCH115639P01: RNCC: 5 | RNVC: 2

4 Apr 2016

5975-01-707-5979
Junction Box

017075979
R-1-14-29: RNCC: 3 | RNVC: 2

10 Feb 2023

5975-01-710-4564
Rack Assembly Unit

017104564
12905150-A: RNCC: 3 | RNVC: 2

31 May 2023

5975-01-706-5754
Electrical Equipment Rack

017065754
030668-0006: RNCC: 3 | RNVC: 2

6 Dec 2022

5975-01-707-5468
Rigid Metal Conduit Assembly

017075468
073910: RNCC: 3 | RNVC: 2
73910: RNCC: 5 | RNVC: 2
073910: RNCC: 5 | RNVC: 2

8 Feb 2023

5975-00-504-7647
Junction Box Cover

005047647
WJ800: RNCC: 4 | RNVC: 1
52C12: RNCC: 5 | RNVC: 9
52C35: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-710-5658
Electrical Equipment Rack

017105658
P9K15A: RNCC: 3 | RNVC: 2

7 Jun 2023

5975-01-708-3869
Electrical Cable Protector

017083869
3338400-115: RNCC: 3 | RNVC: 2

3 Apr 2023

5975-01-708-9473
Raceway End Cap

017089473
ACP80360: RNCC: 3 | RNVC: 2

2 May 2023

5975-01-707-1028
Junction Box

017071028
ACCUSB-HJB: RNCC: 3 | RNVC: 2

17 Jan 2023

5975-01-708-7196
Electrical Equipment Rack

017087196
5HK01195-107: RNCC: 3 | RNVC: 2

18 Apr 2023

5975-01-709-1965
Card Pack Unit

017091965
EB-5579-2: RNCC: 3 | RNVC: 2
ERH832-7103A76-PN-6: RNCC: C | RNVC: 1

16 May 2023

5975-01-709-2346
Raceway Cover

017092346
NC3WH6: RNCC: 3 | RNVC: 2
17-61364: RNCC: 7 | RNVC: 2

18 May 2023

5975-01-708-2821
Cable Terminal Chamber

017082821
46281-1: RNCC: 3 | RNVC: 2

27 Mar 2023

5975-01-702-8137
Metallic Raceway Assembly

017028137
842-349624-1: RNCC: 3 | RNVC: 2

30 Jul 2022

5975-01-018-4863
Conduit Outlet Cover

010184863
DS1025G: RNCC: 3 | RNVC: 2
DS1030G: RNCC: E | RNVC: 8

29 Mar 1976

5975-01-103-3695
Conduit

011033695
5P0695: RNCC: 3 | RNVC: 2
5P-0695: RNCC: 5 | RNVC: 2
5P 695: RNCC: 5 | RNVC: 9

12 Nov 1980

5975-01-677-6336
Electric Cable Joint Box

016776336
13007A0605: RNCC: 1 | RNVC: 2
13007A0605-01: RNCC: 3 | RNVC: 2
8071-3912-03: RNCC: 5 | RNVC: 9

26 Dec 2018

5975-01-185-2788
Insulator Bracket

011852788
G-3007C: RNCC: 3 | RNVC: 2
3007C: RNCC: 5 | RNVC: 9
12443789: RNCC: 7 | RNVC: 2

27 Jul 1984

5975-01-698-2793
Cable Marker Sleeve

016982793
8245404-18: RNCC: 3 | RNVC: 2
8245404 SHEET 4: RNCC: 5 | RNVC: 2
8245404: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-2804
Cable Marker Sleeve

016982804
8247203-12: RNCC: 3 | RNVC: 2
8247203 SHEET 4: RNCC: C | RNVC: 1
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-1161
Cable Marker Sleeve

016981161
8247203-103: RNCC: 3 | RNVC: 2
8247203-103: RNCC: 5 | RNVC: 2

28 Oct 2021

5975-01-698-4934
Electrical Equipment Rack

016984934
10-4323: RNCC: 3 | RNVC: 9

19 Nov 2021

5975-01-697-8779
Electrical Grounding Plate

016978779
20-077-5D1B: RNCC: 3 | RNVC: 2

15 Oct 2021

5975-01-697-9325
Cable Strain Relief Bushing

016979325
P556-04: RNCC: 3 | RNVC: 2
3-7467 REV-ITEM 15: RNCC: D | RNVC: 9

19 Oct 2021

5975-01-698-6181
Electrical Equipment Rack

016986181
BERKMTFULL: RNCC: 3 | RNVC: 2

30 Nov 2021

5975-01-698-4352
Junction Box

016984352
8251787-1: RNCC: 3 | RNVC: 2
8251787-1: RNCC: 5 | RNVC: 2
PL 8251787-1: RNCC: C | RNVC: 1
8251787: RNCC: D | RNVC: 9

17 Nov 2021

5975-01-659-3547
Ground Rod

016593547
GRDPM625: RNCC: 3 | RNVC: 2
GRDPM750: RNCC: 3 | RNVC: 9

21 Nov 2016

5975-01-707-9613
Cable Strain Relief Bushing

017079613
209W112-100-0: RNCC: 3 | RNVC: 2

7 Mar 2023

5975-01-705-5033
Cable Marker Sleeve

017055033
PCBANDYL-Q: RNCC: 3 | RNVC: 2

22 Sep 2022

5975-01-707-7474
Cable Hanger

017077474
SSH-78: RNCC: 3 | RNVC: 9

21 Feb 2023

5975-01-707-1878
Electrical Equipment Cabinet

017071878
822-2403-251: RNCC: 3 | RNVC: 2
822-2403-251 REV A: RNCC: D | RNVC: 9

20 Jan 2023

5975-01-688-4419
Guide Rail

016884419
AR7580A: RNCC: 3 | RNVC: 2
1AAN025245: RNCC: 5 | RNVC: 2
AR7580A: RNCC: 5 | RNVC: 2

18 May 2020

5975-01-706-8153
Electrical Equipment Rack

017068153
CS-BAR-MOUNT-KIT-: RNCC: 3 | RNVC: 2

21 Dec 2022

5975-01-702-2739
Stuffing Tube

017022739
V4340: RNCC: 3 | RNVC: 2
12701861: RNCC: 7 | RNVC: 2

25 Jun 2022

5975-01-259-0727
Stuffing Tube

012590727
M24235/9-014: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235/9-014-1533: RNCC: 5 | RNVC: 9

13 Jul 1987

5975-01-695-4358
Electrical-Electronic Equipment Chassis

016954358
FA00123-02: RNCC: 3 | RNVC: 2
77A126539P1: RNCC: 5 | RNVC: 9
77A126539P1: RNCC: 5 | RNVC: 9
77A126539 REV H/SHEET 17: RNCC: C | RNVC: 1
77A126539: RNCC: D | RNVC: 9

4 Jun 2021

5975-01-699-1435
Interconnecting Box

016991435
N100681-03: RNCC: 3 | RNVC: 2

11 Jan 2022

5975-01-699-4029
Nonmetallic Raceway

016994029
NE1X4WH6: RNCC: 3 | RNVC: 2
36897-945: RNCC: D | RNVC: 9

27 Jan 2022

5975-01-699-4238
Junction Box

016994238
8256725-1: RNCC: 3 | RNVC: 2
8256725-1: RNCC: 5 | RNVC: 2
8256725-1/REV - FIND SHEET 1: RNCC: D | RNVC: 9

28 Jan 2022

5975-01-699-2544
Flexible Metal Conduit

016992544
11801: RNCC: 3 | RNVC: 2

20 Jan 2022

5975-01-698-8963
Chassis Base

016988963
8604133: RNCC: 3 | RNVC: 2
PL 8604133: RNCC: C | RNVC: 1

17 Dec 2021

5975-01-699-0617
Electrical Cable Protector

016990617
4360289: RNCC: 3 | RNVC: 2

5 Jan 2022

5975-01-699-2755
Electrical Equipment Cabinet

016992755
CTD366012LG: RNCC: 3 | RNVC: 2

21 Jan 2022

5975-01-699-0450
Stuffing Tube

016990450
4530: RNCC: 3 | RNVC: 2
12581004: RNCC: 7 | RNVC: 2

4 Jan 2022

5975-01-700-2912
Electrical Equipment Shelf

017002912
ALH-215690-001: RNCC: 3 | RNVC: 2

22 Mar 2022

5975-01-698-1373
Cable Marker Sleeve

016981373
8245404-13: RNCC: 3 | RNVC: 2
8245404-13: RNCC: 5 | RNVC: 2
8245404 SHEET 4: RNCC: D | RNVC: 9

1 Nov 2021

5975-01-698-0576
Junction Box

016980576
197K2212-100: RNCC: 3 | RNVC: 2
197K2212-100: RNCC: 5 | RNVC: 9

26 Oct 2021

5975-01-698-2802
Cable Marker Sleeve

016982802
8247203-105: RNCC: 3 | RNVC: 2
8247203 SHEET 6: RNCC: C | RNVC: 1
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-2803
Cable Marker Sleeve

016982803
8245404-9: RNCC: 3 | RNVC: 2
8245404 SHEET 4: RNCC: C | RNVC: 1
8245404: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-2797
Cable Marker Sleeve

016982797
8247203-1: RNCC: 3 | RNVC: 2
8247203 SHEET 4: RNCC: 5 | RNVC: 2
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-699-8037
Junction Box

016998037
8251808-1: RNCC: 3 | RNVC: 2
8251808: RNCC: D | RNVC: 9

25 Feb 2022

5975-01-699-8032
Junction Box

016998032
8251804-1: RNCC: 3 | RNVC: 2
8251804: RNCC: D | RNVC: 9

25 Feb 2022

5975-01-701-6381
Stuffing Tube

017016381
M6010: RNCC: 3 | RNVC: 2

27 May 2022

5975-01-701-3582
Blank Panel

017013582
775-21604-15: RNCC: 3 | RNVC: 2
775-21604: RNCC: D | RNVC: 9

12 May 2022

5975-01-708-8035
Electrical Equipment Rack

017088035
SNE30F-4548: RNCC: 3 | RNVC: 2

24 Apr 2023

5975-01-710-5622
Stuffing Tube

017105622
F1836M TYPE-1-003: RNCC: 3 | RNVC: 2
252-8592567 REV G FN 12: RNCC: D | RNVC: 9
8592567/FN 12: RNCC: D | RNVC: 9

7 Jun 2023

5975-01-708-6947
Electrical Equipment Rack

017086947
SNE30H-4542-A2: RNCC: 3 | RNVC: 2

17 Apr 2023

5975-01-536-2382
Electrical-Electronic Equipment Chassis

015362382
WS-C6509-E: RNCC: 3 | RNVC: 2
430-8279637 AY98 ITEM 8: RNCC: 3 | RNVC: 2
WS-C6509-E: RNCC: 5 | RNVC: 2
ITALTEL-WS-C6509-E: RNCC: 5 | RNVC: 2
WS-C6509-E: RNCC: 5 | RNVC: 2
430-8279638 AY97 ITEM 8: RNCC: 5 | RNVC: 2
430-8279639 AY97 ITEM 8: RNCC: 5 | RNVC: 2
430-8279642 AY96 ITEM 8: RNCC: 5 | RNVC: 2
430-8279648 AY94 ITEM 8: RNCC: 5 | RNVC: 2
430-8279649 AY96 ITEM 8: RNCC: 5 | RNVC: 2

23 Dec 2005

5975-01-462-5624
Electrical Components Tie Down Strap

014625624
TY524MXR: RNCC: 3 | RNVC: 2
TY524MXR: RNCC: 3 | RNVC: 2
TY524MXR: RNCC: 5 | RNVC: 2
WX1113A00: RNCC: 5 | RNVC: 2
91839450: RNCC: 5 | RNVC: 2
7TCG009450R0172: RNCC: 5 | RNVC: 2

8 Feb 1999

5975-01-231-4180
Stuffing Tube

012314180
M24235/3-002: RNCC: 2 | RNVC: 2
MIL-S-24235/3: RNCC: 4 | RNVC: 1
9121339: RNCC: 5 | RNVC: 1
MIL-S-24235: RNCC: 5 | RNVC: 9

27 Apr 1986

5975-00-849-4082
Conduit Outlet Cover

008494082
5775: RNCC: 3 | RNVC: 2
573: RNCC: E | RNVC: 8
287-1221P2: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-700-7723
Flexible Metal Conduit

017007723
750-192-40-N-C-G: RNCC: 3 | RNVC: 2
70051329: RNCC: 5 | RNVC: 2

13 Apr 2022

5975-01-149-4266
Dust And Moisture Seal Boot

011494266
73-2424: RNCC: 3 | RNVC: 1
L03258: RNCC: 5 | RNVC: 1
217-4498445ITEM18: RNCC: 5 | RNVC: 1
1077: RNCC: 5 | RNVC: 1
1902AS3000-101 FN229: RNCC: D | RNVC: 9
1902AS1100-101 FN234: RNCC: D | RNVC: 9
1902AS1000-101 FN248: RNCC: D | RNVC: 9
1902AS2100-101 FN230: RNCC: D | RNVC: 9

20 Mar 1983

5975-01-699-8035
Junction Box

016998035
8251804-2: RNCC: 3 | RNVC: 2
8251804: RNCC: D | RNVC: 9

25 Feb 2022

5975-01-699-9428
Junction Box Assembly

016999428
888-5003: RNCC: 3 | RNVC: 2

8 Mar 2022

5975-01-699-8840
Electrical Conduit Adapter

016998840
713301-3: RNCC: 3 | RNVC: 2

3 Mar 2022

5975-01-698-2816
Cable Marker Sleeve

016982816
8247203-23: RNCC: 3 | RNVC: 2
8247203 SHEET 5: RNCC: C | RNVC: 1
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-2828
Cable Marker Sleeve

016982828
8247203-32: RNCC: 3 | RNVC: 2
8247203 SHEET 5: RNCC: C | RNVC: 1
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-8479
Junction Box

016988479
B-0200-010858-000: RNCC: 3 | RNVC: 2
001390-000PC53: RNCC: D | RNVC: 9

15 Dec 2021

5975-01-701-2240
Electrical Equipment Rack

017012240
FFBAS0509: RNCC: 3 | RNVC: 2

4 May 2022

5975-01-699-3577
Mounting Plate

016993577
09003A0409-16: RNCC: 3 | RNVC: 2
090003A0409: RNCC: D | RNVC: 9

26 Jan 2022

5975-01-698-1205
Cable Marker Sleeve

016981205
8247203-38: RNCC: 3 | RNVC: 2
8247203-38: RNCC: 5 | RNVC: 2
8247203 SHEET 6: RNCC: D | RNVC: 9

29 Oct 2021

5975-01-698-1385
Cable Marker Sleeve

016981385
8245404-12: RNCC: 3 | RNVC: 2
8245404-12: RNCC: 5 | RNVC: 2
8245404 SHEET 4: RNCC: D | RNVC: 9

1 Nov 2021

5975-01-699-6506
Electrical Cable Protector

016996506
6870-1045XB6: RNCC: 3 | RNVC: 2
6870-1045: RNCC: D | RNVC: 9

16 Feb 2022

5975-01-699-2434
Flexible Metal Conduit Assembly

016992434
749-1114-1: RNCC: 3 | RNVC: 2
4043AS6243-1: RNCC: 7 | RNVC: 2
4043AS6243: RNCC: D | RNVC: 9

19 Jan 2022

5975-01-699-3204
Electrical Cable Protector

016993204
8789401: RNCC: 3 | RNVC: 2

24 Jan 2022

5975-01-699-2949
Electrical Equipment Rack

016992949
FFBAS0487: RNCC: 3 | RNVC: 9
FICD10646 REV NR: RNCC: D | RNVC: 9

21 Jan 2022

5975-01-698-1318
Cable Marker Sleeve

016981318
8247203-7: RNCC: 3 | RNVC: 2
8247203-7: RNCC: 5 | RNVC: 2
8247203 SHEET 4: RNCC: D | RNVC: 9

29 Oct 2021

5975-01-701-6931
Fan Monitor Drawer

017016931
N151427-2: RNCC: 3 | RNVC: 2

2 Jun 2022

5975-01-701-6872
Chassis Base

017016872
180501: RNCC: 3 | RNVC: 2

1 Jun 2022

5975-01-701-6724
Electrical Equipment Shelf

017016724
77A580883G2-C001: RNCC: 3 | RNVC: 2

31 May 2022

5975-01-701-5260
Rigid Metal Conduit Assembly

017015260
749-1113-1: RNCC: 3 | RNVC: 2
4043AS4119-1: RNCC: 7 | RNVC: 2
4043AS4119: RNCC: D | RNVC: 9

20 May 2022

5975-01-702-7286
Insulator Bracket Strap

017027286
8437106-1: RNCC: 3 | RNVC: 2
8437106: RNCC: D | RNVC: 9

23 Jul 2022

5975-01-700-1055
Electrical Equipment Cabinet

017001055
A161206LPEMCSS: RNCC: 3 | RNVC: 2
A161206LPEMCSS: RNCC: 3 | RNVC: 2
8902839: RNCC: 7 | RNVC: 2

17 Mar 2022

5975-01-702-7714
Flexible Metal Conduit Assembly

017027714
57350-14: RNCC: 3 | RNVC: 1

27 Jul 2022

5975-01-702-0215
Electrical Cable Ground Guard

017020215
12596517: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0548
Electrical Conductor Bushing

017020548
859-015Z2-12-16: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-700-8577
Electrical Conduit Bushing

017008577
74D115176-2135: RNCC: 3 | RNVC: 2
74D115176: RNCC: D | RNVC: 9

18 Apr 2022

5975-01-702-0001
Electrical Cable Protector

017020001
12596908: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-701-1599
Synthesizer

017011599
185330-8: RNCC: 3 | RNVC: 2

1 May 2022

5975-01-700-8335
Metallic Raceway

017008335
US00148987-001: RNCC: 3 | RNVC: 2

15 Apr 2022

5975-01-702-0231
Electrical Cable Ground Guard

017020231
12618106: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-9407
Ant Interface Tray

017029407
8249620-1: RNCC: 3 | RNVC: 2
8249620-1: RNCC: 5 | RNVC: 2

8 Aug 2022

5975-01-698-1154
Cable Marker Sleeve

016981154
8247203-101: RNCC: 3 | RNVC: 2
8247203-101: RNCC: 5 | RNVC: 2
8247203 SHEET 6: RNCC: D | RNVC: 9

28 Oct 2021

5975-01-698-0299
Electrical Equipment Rack

016980299
20706955-5: RNCC: 3 | RNVC: 2

25 Oct 2021

5975-01-699-2736
Flexible Nonmetallic Conduit

016992736
749C187XOWWH095: RNCC: 3 | RNVC: 2
5PTC0021CWWH095: RNCC: 5 | RNVC: 2

21 Jan 2022

5975-01-698-1375
Cable Marker Sleeve

016981375
8245404-109: RNCC: 3 | RNVC: 2
8245404-109: RNCC: 5 | RNVC: 2
8245404 SHEET 5: RNCC: D | RNVC: 9

1 Nov 2021

5975-01-698-1166
Cable Marker Sleeve

016981166
8247203-16: RNCC: 3 | RNVC: 2
8247203-16: RNCC: 5 | RNVC: 2
8247203 SHEET 4: RNCC: D | RNVC: 9

28 Oct 2021

5975-01-698-2791
Cable Marker Sleeve

016982791
8245404-110: RNCC: 3 | RNVC: 2
8245404 SHEET 5: RNCC: 5 | RNVC: 2
8245404: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-2818
Cable Marker Sleeve

016982818
8247203-26: RNCC: 3 | RNVC: 2
8247203 SHEET 5: RNCC: C | RNVC: 1
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-2825
Cable Marker Sleeve

016982825
8247203-31: RNCC: 3 | RNVC: 2
8247203 SHEET 5: RNCC: C | RNVC: 1
8247203: RNCC: D | RNVC: 9

5 Nov 2021

5975-01-698-1329
Cable Marker Sleeve

016981329
8247203-14: RNCC: 3 | RNVC: 2
8247203-14: RNCC: 5 | RNVC: 2
8247203 SHEET 4: RNCC: D | RNVC: 9

29 Oct 2021

5975-01-697-9466
Electrical Equipment Rack

016979466
23466-1: RNCC: 3 | RNVC: 2
23466-1: RNCC: 3 | RNVC: 2
200411769-10: RNCC: 7 | RNVC: 2
200411769: RNCC: D | RNVC: 9

20 Oct 2021

5975-01-699-2234
Electrical Equipment Rack

016992234
F-0003114: RNCC: 3 | RNVC: 2

18 Jan 2022

5975-01-697-9617
Blank Panel

016979617
197K2211-100: RNCC: 3 | RNVC: 2
197K2211-100: RNCC: 5 | RNVC: 9

20 Oct 2021

5975-01-698-6820
Mounting Plate

016986820
790503411034: RNCC: 3 | RNVC: 2
57662810: RNCC: D | RNVC: 9

2 Dec 2021

5975-01-697-7523
Junction Box

016977523
8249271-1: RNCC: 3 | RNVC: 2
8249271-1: RNCC: 5 | RNVC: 2
8249271: RNCC: D | RNVC: 9

7 Oct 2021

5975-01-697-7678
Junction Box

016977678
1109200354: RNCC: 3 | RNVC: 2

8 Oct 2021

5975-01-698-4194
Junction Box

016984194
8246799-1: RNCC: 3 | RNVC: 2
8246799-1: RNCC: 5 | RNVC: 2
PL 8246799-1: RNCC: C | RNVC: 1
8246799: RNCC: D | RNVC: 9

16 Nov 2021

5975-01-701-7718
Electrical Equipment Rack

017017718
13661201-2: RNCC: 3 | RNVC: 2

7 Jun 2022

5975-01-701-9938
Electrical Conduit Wye

017019938
12639363: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0305
Electrical Cable Protector

017020305
12596899: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0228
Electrical Cable Ground Guard

017020228
12617733: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0225
Electrical Cable Ground Guard

017020225
12596924: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0916
Interconnecting Box

017020916
12596763-3: RNCC: 3 | RNVC: 2
12596763: RNCC: D | RNVC: 9

21 Jun 2022

5975-01-033-9760
Transit Stay Plate

010339760
M24705/1-SS2: RNCC: 2 | RNVC: 2
M24705/1SS2: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
MIL-P-24705/1: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
M24705/1SS: RNCC: 5 | RNVC: 9
STEEL STAY PLATE: RNCC: 5 | RNVC: 9
STEEL STAY PLATE: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-01-686-9894
Electrical-Electronic Equipment Chassis

016869894
C9404R(=): RNCC: 3 | RNVC: 2
C9404R: RNCC: 5 | RNVC: 2
C9404R(=): RNCC: 5 | RNVC: 2
C9404R: RNCC: 5 | RNVC: 2
C9404R: RNCC: 5 | RNVC: 2

12 Mar 2020

5975-01-355-8131
Electrical Box Connector

013558131
3M7035-28-6-8: RNCC: 3 | RNVC: 2
12387129-8: RNCC: 5 | RNVC: 1
445NS014MA28: RNCC: 5 | RNVC: 2
901-425S856: RNCC: 5 | RNVC: 2
HT7035-28-6-8: RNCC: 5 | RNVC: 2
ISOAS150TKA28-2: RNCC: 5 | RNVC: 2
3M7035-28-6-8: RNCC: 5 | RNVC: 9
3M7035-28-6-8: RNCC: 5 | RNVC: 9
3M7035-28-6-8: RNCC: 5 | RNVC: 9

24 Mar 1992

5975-01-583-4443
Flexible Nonmetallic Conduit

015834443
7X7702: RNCC: 3 | RNVC: 2
7X-7702: RNCC: 5 | RNVC: 2

25 Mar 2010

5975-01-675-0146
Electrical Equipment Mounting Base

016750146
950316: RNCC: 3 | RNVC: 2
10762087-001: RNCC: 5 | RNVC: 2

17 Aug 2018

5975-01-707-3434
Electrical Equipment Rack

017073434
BW912A: RNCC: 3 | RNVC: 2

28 Jan 2023

5975-01-702-7532
Stuffing Tube

017027532
1000.1/2NPT.080: RNCC: 3 | RNVC: 9

26 Jul 2022

5975-01-707-8533
Cable Spacer

017078533
891907002: RNCC: 3 | RNVC: 2

25 Feb 2023

5975-01-705-5250
Electrical Equipment Rack

017055250
7965-S42: RNCC: 3 | RNVC: 2

23 Sep 2022

5975-01-707-7840
Blank Panel

017077840
PHBL-2: RNCC: 3 | RNVC: 2

22 Feb 2023

5975-01-707-1852
Electrical Equipment Rack

017071852
310113184: RNCC: 3 | RNVC: 2

20 Jan 2023

5975-01-690-0783
Electrical Cable Nipple

016900783
AA59178-4E: RNCC: 2 | RNVC: 2
AA59178: RNCC: 4 | RNVC: 1
10477304: RNCC: 6 | RNVC: 9

24 Jul 2020

5975-01-559-8399
Cable Marker Sleeve

015598399
12420928-003: RNCC: 3 | RNVC: 2
12420928: RNCC: D | RNVC: 9

8 Jan 2008

5975-00-079-8781
Electrical Conduit Bushing

000798781
WF408: RNCC: 4 | RNVC: 1
3874: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-701-6521
Chassis Base

017016521
1705989A: RNCC: 3 | RNVC: 2

28 May 2022

5975-01-702-7719
Flexible Metal Conduit Assembly

017027719
57350-29: RNCC: 3 | RNVC: 1

27 Jul 2022

5975-01-702-0004
Electrical Cable Protector

017020004
12596916: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0220
Electrical Cable Ground Guard

017020220
12596906: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-701-7179
Cable Hanger

017017179
39911: RNCC: 3 | RNVC: 2
11027D4016-3: RNCC: 7 | RNVC: 2

3 Jun 2022

5975-01-698-4359
Mounting Plate

016984359
46836-1: RNCC: 3 | RNVC: 2
46836: RNCC: D | RNVC: 9

17 Nov 2021

5975-01-698-1755
Electrical Grounding Plate

016981755
901-060-684-107: RNCC: 3 | RNVC: 2

2 Nov 2021

5975-01-698-8933
Cable Strain Relief Bushing

016988933
M3210: RNCC: 3 | RNVC: 2

17 Dec 2021

5975-01-698-1257
Electrical Wall Plate

016981257
20-077-5A2D: RNCC: 3 | RNVC: 2

29 Oct 2021

5975-01-702-0227
Electrical Cable Ground Guard

017020227
12596926: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-701-1606
Synthesizer

017011606
180330-8: RNCC: 3 | RNVC: 2

1 May 2022

5975-01-698-4011
Chassis Base

016984011
WAV-DMP900-CHASSIS: RNCC: 3 | RNVC: 2

15 Nov 2021

5975-01-701-3247
Electrical Conduit Adapter

017013247
96250: RNCC: 3 | RNVC: 2
234899: RNCC: 5 | RNVC: 2

10 May 2022

5975-01-698-9737
Electrical Equipment Drawer

016989737
A0097684: RNCC: 3 | RNVC: 2
A0097684 C: RNCC: D | RNVC: 9

28 Dec 2021

5975-01-698-1383
Cable Marker Sleeve

016981383
8245404-19: RNCC: 3 | RNVC: 2
8245404-19: RNCC: 5 | RNVC: 2
8245404 SHEET 4: RNCC: D | RNVC: 9

1 Nov 2021

5975-01-702-1009
Metallic Raceway Assembly

017021009
184877-1: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-700-8572
Electrical Conduit Bushing

017008572
74D115176-2231: RNCC: 3 | RNVC: 2
74D115176: RNCC: D | RNVC: 9

18 Apr 2022

5975-01-698-7944
Enclosure Assembly

016987944
N152801-1: RNCC: 3 | RNVC: 2

9 Dec 2021

5975-01-699-4313
Junction Box

016994313
SJE020056: RNCC: 3 | RNVC: 2

29 Jan 2022

5975-01-699-2941
Valve Coil

016992941
7400: RNCC: 3 | RNVC: 2

21 Jan 2022

5975-01-699-3752
Electrical Equipment Shelf

016993752
8789397: RNCC: 3 | RNVC: 2

26 Jan 2022

5975-01-698-1220
Cable Marker Sleeve

016981220
8247203-104: RNCC: 3 | RNVC: 2
8247203-104: RNCC: 5 | RNVC: 2
8247203 SHEET 6: RNCC: D | RNVC: 9

29 Oct 2021

5975-01-699-2276
Electrical Cable Nipple

016992276
6033: RNCC: 3 | RNVC: 9

18 Jan 2022

5975-01-700-6602
Electrical Cable Protector

017006602
4370681: RNCC: 3 | RNVC: 2

6 Apr 2022

5975-01-699-9015
Cable Strain Relief Bushing

016999015
106177: RNCC: 3 | RNVC: 9
5-13-10728: RNCC: D | RNVC: 9

4 Mar 2022

5975-01-693-6777
Electrical Equipment Cabinet

016936777
12712084: RNCC: 3 | RNVC: 2
113018C1059-0: RNCC: 5 | RNVC: 2
113018C1059: RNCC: D | RNVC: 9

26 Feb 2021

5975-01-605-0487
Flexible Nonmetallic Conduit

016050487
8C5063: RNCC: 3 | RNVC: 2
8C-5063: RNCC: 5 | RNVC: 2

16 Apr 2012

5975-01-034-3446
Electrical Cable Protector

010343446
M24705/1BN9065: RNCC: 2 | RNVC: 2
M24705/1-BN9065: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
90/65: RNCC: 5 | RNVC: 9
90/65: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-034-0424
Electrical Cable Protector

010340424
M24705/1BN4022: RNCC: 2 | RNVC: 2
M24705/1-BN4022: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
40/22: RNCC: 5 | RNVC: 9
40/22: RNCC: 5 | RNVC: 9

17 Jan 1977

5975-00-889-8075
Metallic Raceway

008898075
LD65: RNCC: 3 | RNVC: 2
LD65: RNCC: 5 | RNVC: 9
5C65: RNCC: E | RNVC: 8

1 Jan 1962

5975-01-464-5038
Waveguide Assy

014645038
M287/4-38-0060: RNCC: 2 | RNVC: 2
MIL-DTL-287/4: RNCC: 4 | RNVC: 1
52061: RNCC: 5 | RNVC: 1
M287/4-38-0060: RNCC: 5 | RNVC: 1

3 May 1999

5975-01-700-7724
Flexible Metal Conduit

017007724
750-192-56-N-C-G: RNCC: 3 | RNVC: 2
70051330: RNCC: 5 | RNVC: 2

13 Apr 2022

5975-01-708-8385
Cable Marker Sleeve

017088385
PS-375-2-RD: RNCC: 3 | RNVC: 2

26 Apr 2023

5975-01-708-8396
Cable Marker Sleeve

017088396
PS-1000-2-RD: RNCC: 3 | RNVC: 2

26 Apr 2023

5975-01-702-4117
Rigid Metal Conduit

017024117
130-369002-0023: RNCC: 3 | RNVC: 2

5 Jul 2022

5975-01-703-3209
Electrical Cable Protector

017033209
3403.26.002: RNCC: 3 | RNVC: 2

30 Aug 2022

5975-01-070-6505
Electrical Components Tie Down Strap

010706505
PLT8HLP: RNCC: 3 | RNVC: 2
032050: RNCC: 5 | RNVC: 2
32050: RNCC: 5 | RNVC: 9
PLT8HL: RNCC: 5 | RNVC: 9

16 Jan 1979

5975-00-403-7426
Electrical Conduit Nipple

004037426
0N100: RNCC: 3 | RNVC: 9
M40-22: RNCC: 5 | RNVC: 9
302: RNCC: 5 | RNVC: 9
192: RNCC: 5 | RNVC: 9
1454: RNCC: C | RNVC: 1
C43: RNCC: E | RNVC: 8

25 Jul 1969

5975-01-627-1361
Electrical-Electronic Equipment Chassis

016271361
VXR-000040: RNCC: 3 | RNVC: 2
VXR-000080: RNCC: 3 | RNVC: 2
SMS003679: RNCC: 5 | RNVC: 2
LPL20706955-1 REV - ITEM 84: RNCC: D | RNVC: 9

2 Apr 2014

5975-01-584-9552
Rigid Metal Conduit

015849552
6V5817: RNCC: 3 | RNVC: 2
6V-5817: RNCC: 5 | RNVC: 2

12 May 2010

5975-01-577-7327
Cable Terminal Chamber

015777327
9X9825: RNCC: 3 | RNVC: 2
9X-9825: RNCC: 5 | RNVC: 2

16 Sep 2009

5975-01-034-2706
Electrical Components Tie Down Strap

010342706
PLT2I-M: RNCC: 3 | RNVC: 2
RT-508: RNCC: 3 | RNVC: 2
TY242M: RNCC: 3 | RNVC: 2
08-377: RNCC: 3 | RNVC: 2
E0043-7A0P: RNCC: 5 | RNVC: 2
C121-Z9-C106: RNCC: 5 | RNVC: 2
91421289: RNCC: 5 | RNVC: 2
188450887: RNCC: 5 | RNVC: 2
188450879: RNCC: 5 | RNVC: 2
242201505095: RNCC: 5 | RNVC: 2

22 Jan 1977

5975-00-578-2748
Electrical Conductor Bushing

005782748
BB75: RNCC: 3 | RNVC: 2
PEM3: RNCC: 5 | RNVC: 2
29302: RNCC: 5 | RNVC: 9
BTL71072: RNCC: 5 | RNVC: 9
BTL71072: RNCC: 5 | RNVC: 9
MP1303: RNCC: 5 | RNVC: 9
BB75: RNCC: 5 | RNVC: 9
IB41: RNCC: 5 | RNVC: 9
BTL71072: RNCC: D | RNVC: 9
BB75 3-4: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-555-3456
Electrical Components Tie Down Strap

015553456
0341432: RNCC: 3 | RNVC: 2
HOLD PN: RNCC: 3 | RNVC: 2
034-1432: RNCC: 3 | RNVC: 2

4 Sep 2007

5975-00-132-9472
Flexible Metal Conduit

001329472
A-A-52440-1B-7: RNCC: 2 | RNVC: 2
A-A-52440: RNCC: 4 | RNVC: 1
4342: RNCC: 5 | RNVC: 1
3888: RNCC: 5 | RNVC: 1
5025: RNCC: 5 | RNVC: 1
S152-4864: RNCC: 5 | RNVC: 1
8424: RNCC: 5 | RNVC: 1
8324: RNCC: 5 | RNVC: 1
4342: RNCC: 5 | RNVC: 9
A.E.T.L.5350-00-9352: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-661-8974
Electrical Equipment Shelf

016618974
39593-40208-10: RNCC: 3 | RNVC: 2
39593-40201-10: RNCC: 5 | RNVC: 9

20 Mar 2017

5975-01-659-6670
Electrical Equipment Rack

016596670
304A310-1: RNCC: 3 | RNVC: 2
304A310: RNCC: D | RNVC: 9

8 Dec 2016

5975-01-034-3603
Transit Protector Frame

010343603
M24705/1-FS6: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
M24705/1FSO6: RNCC: 5 | RNVC: 9
RGSO-6: RNCC: 5 | RNVC: 9
RGSO-6: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-703-2772
Metallic Raceway Assembly

017032772
8002457-2: RNCC: 3 | RNVC: 9

26 Aug 2022

5975-01-702-5074
Electrical Equipment Shelf

017025074
360G2-1U-MOD-SD: RNCC: 3 | RNVC: 2
760193771: RNCC: 3 | RNVC: 2

12 Jul 2022

5975-01-702-5078
Blank Panel

017025078
A9K-LC-FILR-V2: RNCC: 3 | RNVC: 2

12 Jul 2022

5975-01-690-7512
Seal Retainer

016907512
M24235/3-023-4 REV A: RNCC: 2 | RNVC: 2
MIL-S-24235/3: RNCC: 4 | RNVC: 1
15024642: RNCC: 5 | RNVC: 2

31 Aug 2020

5975-01-706-3484
Junction Box

017063484
5340-0: RNCC: 3 | RNVC: 2

17 Nov 2022

5975-01-706-8260
Interconnecting Box

017068260
A158-16926: RNCC: 3 | RNVC: 2
16926 REV T: RNCC: 7 | RNVC: 2

21 Dec 2022

5975-01-707-7027
Interconnecting Box Cover

017077027
13074095: RNCC: 3 | RNVC: 2

16 Feb 2023

5975-01-707-8550
Modem Assembly Tray

017078550
284A7700-105: RNCC: 3 | RNVC: 2

26 Feb 2023

5975-01-707-9841
Electrical Equipment Cabinet

017079841
4803083: RNCC: 3 | RNVC: 2
PL 4303784: RNCC: D | RNVC: 9

8 Mar 2023

5975-01-706-7730
Electrical Cable Ground Guard

017067730
5-13-13718-1: RNCC: 3 | RNVC: 2
5-13-13718: RNCC: D | RNVC: 9

16 Dec 2022

5975-01-706-3524
Electrical Equipment Foot

017063524
766530-001: RNCC: 3 | RNVC: 2

17 Nov 2022

5975-01-706-7735
Stuffing Tube

017067735
630A007MT163D: RNCC: 3 | RNVC: 2

16 Dec 2022

5975-01-705-4655
Electrical Cable Protector

017054655
12656884: RNCC: 3 | RNVC: 2

21 Sep 2022

5975-01-701-9207
Electrical Equipment Rack

017019207
5411551-1: RNCC: 3 | RNVC: 2

16 Jun 2022

5975-00-347-6080
Conduit Outlet

003476080
T50TA: RNCC: 3 | RNVC: 2
T19MT: RNCC: E | RNVC: 8

20 Jan 1974

5975-01-034-3445
Electrical Cable Protector

010343445
M24705/1BN9060: RNCC: 2 | RNVC: 2
M24705/1-BN9060: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
MIL-P-24705/1: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
90/60: RNCC: 5 | RNVC: 9
90/60: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-661-6106
Electrical-Electronic Equipment Chassis

016616106
RFP-M0000-REC-1E00: RNCC: 3 | RNVC: 2
RFP-M0000-REC-1E1C: RNCC: 3 | RNVC: 2

9 Mar 2017

5975-01-197-9051
Junction Box Cover

011979051
912179-1: RNCC: 3 | RNVC: 2
912179: RNCC: 5 | RNVC: 2
912179: RNCC: 5 | RNVC: 9
912179: RNCC: 5 | RNVC: 9

30 Dec 1984

5975-01-584-8816
Seal Retainer

015848816
M24235/3-023: RNCC: 2 | RNVC: 2
MIL-S-24235/3: RNCC: 4 | RNVC: 1
H415-8221-005: RNCC: 5 | RNVC: 1
211076116: RNCC: 5 | RNVC: 1
461-7383838-005: RNCC: 5 | RNVC: 1

10 May 2010

5975-01-661-4303
Interior Cable Rack

016614303
AR8425A: RNCC: 3 | RNVC: 2
VCH115352P01: RNCC: 5 | RNVC: 2
1AAN025791: RNCC: 5 | RNVC: 2

2 Mar 2017

5975-01-363-5125
Electrical Equipment Rack

013635125
4925A272191-1: RNCC: 3 | RNVC: 2
4925A272191: RNCC: D | RNVC: 9

31 Aug 1992

5975-01-035-5121
Electrical Cable Protector

010355121
M24705/1BN9050: RNCC: 2 | RNVC: 2
M24705/1-BN9050: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
90/50: RNCC: 5 | RNVC: 9
90/50: RNCC: 5 | RNVC: 9

11 Feb 1977

5975-01-707-0632
Electrical Equipment Rack

017070632
783882-01: RNCC: 3 | RNVC: 2

12 Jan 2023

5975-01-707-4445
Electrical Equipment Shelf

017074445
NCS2002-SA=: RNCC: 3 | RNVC: 2

2 Feb 2023

5975-01-707-9444
Blank Panel

017079444
PHBL-1: RNCC: 3 | RNVC: 2

6 Mar 2023

5975-01-034-3444
Electrical Cable Protector

010343444
M24705/1-BN9055: RNCC: 2 | RNVC: 2
M24705/1BN9055: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
MIL-P-24705/1: RNCC: 5 | RNVC: 9
90/55: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
90/55: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-707-1160
Blank Panel

017071160
40304-078: RNCC: 3 | RNVC: 2

18 Jan 2023

5975-01-705-7027
Electrical Conduit Adapter

017057027
14640: RNCC: 3 | RNVC: 2

5 Oct 2022

5975-01-705-6839
Electrical Equipment Rack

017056839
16E2862-803: RNCC: 3 | RNVC: 2

4 Oct 2022

5975-01-702-6025
Blank Panel

017026025
8269423-35: RNCC: 1 | RNVC: 2
25R9934/0961: RNCC: 3 | RNVC: 2
8269423-35: RNCC: 5 | RNVC: 2
8269423: RNCC: D | RNVC: 9

18 Jul 2022

5975-01-702-7928
Electrical Wall Plate

017027928
CFP1IW: RNCC: 3 | RNVC: 2
12665719: RNCC: 7 | RNVC: 2

28 Jul 2022

5975-01-034-3447
Electrical Cable Protector

010343447
M24705/1BN9070: RNCC: 2 | RNVC: 2
M24705/1-BN9070: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
90/70: RNCC: 5 | RNVC: 9
90/70: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-00-296-3337
Electrical Conduit Adapter

002963337
AN3104-1: RNCC: 2 | RNVC: 2
MILE6719: RNCC: 4 | RNVC: 1
AN3104-1: RNCC: 5 | RNVC: 1
27623: RNCC: 5 | RNVC: 1
YD128: RNCC: 5 | RNVC: 1
E459: RNCC: 5 | RNVC: 1
23585: RNCC: 5 | RNVC: 1
39274: RNCC: 5 | RNVC: 1
E1124-30-10: RNCC: 5 | RNVC: 1
E1124-30-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-085-4167
Electrical Components Tie Down Strap

010854167
TY27MX: RNCC: 3 | RNVC: 2
D700100/29: RNCC: 5 | RNVC: 2
BT4LH-0: RNCC: 5 | RNVC: 2
TY27MX: RNCC: 5 | RNVC: 2
TM27M-X-0: RNCC: 5 | RNVC: 2
5800583-096200-008: RNCC: 5 | RNVC: 2
TY27MX: RNCC: 5 | RNVC: 2
D700100/29: RNCC: 5 | RNVC: 9
TY27MX: RNCC: 5 | RNVC: 9
D700100/29: RNCC: 5 | RNVC: 9

7 Nov 1979

5975-01-701-3354
Electrical Conduit Adapter

017013354
712-188-C-40-J: RNCC: 3 | RNVC: 2
70051887: RNCC: 5 | RNVC: 2

11 May 2022

5975-01-700-7732
Flexible Metal Conduit

017007732
750-192-96-N-C-G: RNCC: 3 | RNVC: 2
70051332: RNCC: 5 | RNVC: 2

13 Apr 2022

5975-01-699-2198
Electrical Equipment Shelf

016992198
322R035-1: RNCC: 3 | RNVC: 2

18 Jan 2022

5975-00-408-3197
Rope Assy

004083197
271-1606: RNCC: 3 | RNVC: 2
M379: RNCC: 3 | RNVC: 2
M-379: RNCC: 5 | RNVC: 2
10-1168-17-00-0: RNCC: 5 | RNVC: 2
10-1168-170-00: RNCC: 5 | RNVC: 2
A9034: RNCC: 5 | RNVC: 2
SCC35483: RNCC: 5 | RNVC: 2
AC233729: RNCC: 5 | RNVC: 9
AC233729-1: RNCC: 5 | RNVC: 9
B7554: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-698-3900
Electrical Equipment Shelf

016983900
015033: RNCC: 3 | RNVC: 2

15 Nov 2021

5975-01-694-3192
Electrical Equipment Cabinet

016943192
G7116-68713: RNCC: 3 | RNVC: 2
0350624554001: RNCC: 5 | RNVC: 2

26 Mar 2021

5975-01-701-2887
Electrical Conduit Adapter

017012887
712-188-C-32-J: RNCC: 3 | RNVC: 2
70051886: RNCC: 5 | RNVC: 2

9 May 2022

5975-00-446-7782
Electrical Conduit Coupling

004467782
TK125A: RNCC: 3 | RNVC: 2
M21-24: RNCC: 5 | RNVC: 9
TK125: RNCC: 5 | RNVC: 9
TK125: RNCC: 5 | RNVC: 9
5038: RNCC: 5 | RNVC: 9
2026: RNCC: 5 | RNVC: 9
1034-S: RNCC: 5 | RNVC: 9
20404: RNCC: 5 | RNVC: 9
CP45: RNCC: 5 | RNVC: 9
244: RNCC: 5 | RNVC: 9

12 Jan 1968

5975-00-796-8403
Electrical Box Connector

007968403
7968403: RNCC: 3 | RNVC: 2
25704-281261-02-0: RNCC: 5 | RNVC: 2
25704-281261-02-0: RNCC: 5 | RNVC: 2
7968403: RNCC: 5 | RNVC: 9
7968403: RNCC: 5 | RNVC: 9
7968403: RNCC: 5 | RNVC: 9
5975007968403: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-702-2869
Electrical Equipment Rack

017022869
046D51: RNCC: 3 | RNVC: 2

27 Jun 2022

5975-01-701-9454
Electrical Box Connector

017019454
717-509M56: RNCC: 3 | RNVC: 2
STD/0000107938: RNCC: 5 | RNVC: 1
70051837: RNCC: 5 | RNVC: 2

17 Jun 2022

5975-01-702-3369
Electrical Equipment Rack

017023369
Y235M: RNCC: 3 | RNVC: 2

29 Jun 2022

5975-01-674-8204
Raceway Cover

016748204
EB3Z14A099G: RNCC: 3 | RNVC: 2
7423228778: RNCC: 5 | RNVC: 2
23228778: RNCC: 5 | RNVC: 2
EB3T14A099JA: RNCC: 5 | RNVC: 9

13 Aug 2018

5975-00-193-1696
Junction Box

001931696
ASE8X6X4: RNCC: 3 | RNVC: 2
AB-864SBGK: RNCC: 5 | RNVC: 2
WJ800: RNCC: E | RNVC: 8

18 Mar 1973

5975-01-701-9462
Electrical Box Connector

017019462
717-509M96: RNCC: 3 | RNVC: 2
STD/0000107938: RNCC: 5 | RNVC: 1
70051840: RNCC: 5 | RNVC: 2

17 Jun 2022

5975-01-701-9452
Electrical Box Connector

017019452
717-509M40: RNCC: 3 | RNVC: 2
STD/0000107938: RNCC: 5 | RNVC: 1
70051836: RNCC: 5 | RNVC: 2

17 Jun 2022

5975-01-698-5698
Junction Box

016985698
2IH5-2: RNCC: 3 | RNVC: 2

24 Nov 2021

5975-01-698-5943
Mounting Plate

016985943
621519-5: RNCC: 3 | RNVC: 2

29 Nov 2021

5975-00-660-5809
Electrical Conduit Coupling

006605809
AA50553-2-1-G-06-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
8620: RNCC: 5 | RNVC: 1
HK-406: RNCC: 5 | RNVC: 1
NTCC-200: RNCC: 5 | RNVC: 1
1828: RNCC: 5 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
30-200: RNCC: 5 | RNVC: 9
HK-406: RNCC: 5 | RNVC: 9
8620: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-925-9314
Electrical Box Connector

009259314
AA50553-2-1-G-07-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
8721: RNCC: 5 | RNVC: 1
HC-407: RNCC: 5 | RNVC: 1
NTC-250: RNCC: 5 | RNVC: 1
8721: RNCC: 5 | RNVC: 9
W-F-408-2-1-B-1-07-S: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9
31-250: RNCC: 5 | RNVC: 9
HC-407: RNCC: 5 | RNVC: 9

11 Feb 1966

5975-01-701-3362
Electrical Conduit Adapter

017013362
712-188-C-80-J: RNCC: 3 | RNVC: 2
70051889: RNCC: 5 | RNVC: 2

11 May 2022

5975-00-803-1508
Electrical Conduit Bushing

008031508
AA50553-3-1-Q-2-08-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
1229: RNCC: 5 | RNVC: 1
1229: RNCC: 5 | RNVC: 1
BU300I: RNCC: 5 | RNVC: 1
1127: RNCC: 5 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
12207: RNCC: 5 | RNVC: 9
417-111-M: RNCC: 5 | RNVC: 9
368: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-699-8971
Stuffing Tube

016998971
029925-000: RNCC: 3 | RNVC: 2
029925-000: RNCC: 5 | RNVC: 2

4 Mar 2022

5975-01-699-8536
Electrical Equipment Rack

016998536
16E5458-5: RNCC: 3 | RNVC: 2

2 Mar 2022

5975-00-846-8399
Conduit Outlet

008468399
AA50563-101ALLBK: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LB400-M: RNCC: 5 | RNVC: 1
LB107: RNCC: 5 | RNVC: 1
LB107: RNCC: 5 | RNVC: 9
70-403: RNCC: 5 | RNVC: 9
480-113-M: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
15709: RNCC: 5 | RNVC: 9
LB70: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-655-2771
Conduit Outlet

006552771
AA50563-101XLLRF: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
A-A-50563A: RNCC: 5 | RNVC: 1
LR67WITH670F: RNCC: 5 | RNVC: 1
WC586TYPE1DESIGN1STYLELR: RNCC: 5 | RNVC: 9
WC586: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-699-2647
Cable Hanger

016992647
373574-1: RNCC: 3 | RNVC: 2

20 Jan 2022

5975-00-607-2403
Cable Hanger

006072403
7739252: RNCC: 3 | RNVC: 2
A10701: RNCC: 5 | RNVC: 2
5975006072403: RNCC: 6 | RNVC: 9
1005006072403: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-242-4234
Electrical Conduit Adapter

002424234
RE21: RNCC: 3 | RNVC: 2
CF8201: RNCC: 3 | RNVC: 2
RB75-50: RNCC: 5 | RNVC: 2
601: RNCC: 5 | RNVC: 2
1142: RNCC: 5 | RNVC: 2
RE-21: RNCC: 5 | RNVC: 2
8201: RNCC: 5 | RNVC: 2
066497: RNCC: 5 | RNVC: 2
59-205A: RNCC: 5 | RNVC: 2
601: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-956-1365
Electrical Conduit Locknut

009561365
150: RNCC: 3 | RNVC: 2
BL400: RNCC: 3 | RNVC: 2
LN13: RNCC: 5 | RNVC: 2
LN-110: RNCC: 5 | RNVC: 2
1016: RNCC: 5 | RNVC: 2
161: RNCC: 5 | RNVC: 9
1-400: RNCC: 5 | RNVC: 9
LN-110: RNCC: 5 | RNVC: 9
150: RNCC: 5 | RNVC: 9
20: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-247-4999
Electrical Conduit Ferrule

002474999
AN3052-10: RNCC: 2 | RNVC: 2
7611100P68: RNCC: 5 | RNVC: 1
T7611100REV26PT6: RNCC: 5 | RNVC: 1
650574-57: RNCC: 5 | RNVC: 1
11-3-10: RNCC: 5 | RNVC: 1
11-3-10: RNCC: 5 | RNVC: 9
B10108-27: RNCC: 5 | RNVC: 9
BA10108-27: RNCC: 5 | RNVC: 9
6026-1026-16: RNCC: 5 | RNVC: 9
BA10108-27: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-700-8631
Mounting Plate

017008631
114S2720-17: RNCC: 3 | RNVC: 2

18 Apr 2022

5975-01-034-5530
Electrical Cable Protector

010345530
M24705/1-BN3021: RNCC: 2 | RNVC: 2
M24705/1BN3021: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
30/21: RNCC: 5 | RNVC: 9
30/21: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-590-2200
Cable Strain Relief Bushing

015902200
CD36NA-BK: RNCC: 3 | RNVC: 2
ES20145: RNCC: 5 | RNVC: 2
1.209.6401.70: RNCC: 5 | RNVC: 2

23 Nov 2010

5975-01-633-1071
Electronic Equipment Mounting Tray

016331071
EX-6301B: RNCC: 3 | RNVC: 2
40051494: RNCC: 5 | RNVC: 2
EX-6301: RNCC: 5 | RNVC: 2
TEL SC LT RM: RNCC: 5 | RNVC: 2
TEL SC LT RM: RNCC: 5 | RNVC: 9
10469706: RNCC: 6 | RNVC: 9

7 Nov 2014

5975-01-034-3605
Transit Protector Frame

010343605
M24705/1FAO6: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
RGAO-6: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
RGAO-6: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-700-7136
Electrical Conduit Adapter

017007136
51761-004: RNCC: 3 | RNVC: 2

8 Apr 2022

5975-01-702-4300
Electrical Conductor Bushing

017024300
00B11105-1: RNCC: 3 | RNVC: 2

6 Jul 2022

5975-01-698-0270
Electrical Equipment Cabinet

016980270
SR42UBSP1: RNCC: 3 | RNVC: 2

25 Oct 2021

5975-01-699-3324
Cable Hanger

016993324
373572-1: RNCC: 3 | RNVC: 2

24 Jan 2022

5975-01-677-8703
Electrical-Electronic Equipment Chassis

016778703
864668-B21: RNCC: 3 | RNVC: 2
864668-B21-5: RNCC: 5 | RNVC: 2

10 Jan 2019

5975-01-698-4026
Electrical Equipment Drawer

016984026
68T060406-1001: RNCC: 3 | RNVC: 2

15 Nov 2021

5975-01-699-3811
Electrical Cable Protector

016993811
GD5X75-ST: RNCC: 3 | RNVC: 9

26 Jan 2022

5975-01-699-0516
Conduit Metal Flex

016990516
990326-1: RNCC: 3 | RNVC: 2

5 Jan 2022

5975-01-698-5441
Electrical Equipment Rack

016985441
O9400-R-AFGR-G: RNCC: 3 | RNVC: 2

23 Nov 2021

5975-01-699-5511
Interconnecting Box

016995511
G378: RNCC: 3 | RNVC: 2
1526643: RNCC: 5 | RNVC: 2

8 Feb 2022

5975-01-698-6213
Junction Box

016986213
MMCIBB47001: RNCC: 3 | RNVC: 9
MMCIBB47001: RNCC: 5 | RNVC: 2

30 Nov 2021

5975-01-702-9576
Electrical Cable Protector

017029576
39870020: RNCC: 3 | RNVC: 2

9 Aug 2022

5975-00-889-8619
Wireway Elbow

008898619
LD690L: RNCC: 3 | RNVC: 2
LD690L: RNCC: 5 | RNVC: 9
LD690L: RNCC: 5 | RNVC: 9
LD690LS: RNCC: E | RNVC: 8
LD690LS: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-518-3157
Electrical Conduit Locknut

005183157
149: RNCC: 3 | RNVC: 2
BL350: RNCC: 3 | RNVC: 2
1014: RNCC: 5 | RNVC: 2
LN12: RNCC: 5 | RNVC: 2
LN-109: RNCC: 5 | RNVC: 2
1-350: RNCC: 5 | RNVC: 9
LN-109: RNCC: 5 | RNVC: 9
309: RNCC: 5 | RNVC: 9
149: RNCC: 5 | RNVC: 9
19: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-698-1111
Electrical Equipment Cabinet

016981111
10002539: RNCC: 3 | RNVC: 2

28 Oct 2021

5975-00-242-4271
Conduit Outlet

002424271
AA50563-104ACCCF: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
C68: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE I DESIGN 4 STYLE C: RNCC: 5 | RNVC: 9
C67: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-697-8451
Cable Strain Relief Bushing

016978451
5155-0: RNCC: 3 | RNVC: 2

14 Oct 2021

5975-00-174-9126
Knockout Reducing Washer

001749126
RW150: RNCC: 3 | RNVC: 1
3714: RNCC: 3 | RNVC: 9
WA-161: RNCC: 5 | RNVC: 1
RW200-50: RNCC: 5 | RNVC: 1
CATAL0G3714: RNCC: 5 | RNVC: 9
3714: RNCC: 5 | RNVC: 9
13410: RNCC: 5 | RNVC: 9
1071: RNCC: 5 | RNVC: 9
601: RNCC: 5 | RNVC: 9
352: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-034-3439
Electrical Cable Protector

010343439
M24705/1BN6046: RNCC: 2 | RNVC: 2
M24705/1-BN6046: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
60/46: RNCC: 5 | RNVC: 9
60/46: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-700-7721
Flexible Metal Conduit

017007721
750-192-32-N-C-G: RNCC: 3 | RNVC: 2
70051328: RNCC: 5 | RNVC: 2

13 Apr 2022

5975-01-700-7722
Flexible Metal Conduit

017007722
750-192-20-N-C-G: RNCC: 3 | RNVC: 2
70051326: RNCC: 5 | RNVC: 2

13 Apr 2022

5975-01-699-7268
Electrical Equipment Rack

016997268
115-01294-00: RNCC: 3 | RNVC: 2

22 Feb 2022

5975-01-699-8700
Electrical Equipment Rack

016998700
TPC2365-LT-R: RNCC: 3 | RNVC: 2

3 Mar 2022

5975-01-700-7770
Cable Collar

017007770
607170-0: RNCC: 3 | RNVC: 2

13 Apr 2022

5975-01-701-3363
Electrical Conduit Adapter

017013363
712-188-C-96-J: RNCC: 3 | RNVC: 2
70051890: RNCC: 5 | RNVC: 2

11 May 2022

5975-00-557-2688
Junction Box Extension

005572688
30EXT1-2: RNCC: 3 | RNVC: 2
30X1-2: RNCC: 3 | RNVC: 2
25151-1-2: RNCC: 3 | RNVC: 2
128TYPE5SIZENMSTYLE35-5: RNCC: 4 | RNVC: 1
102: RNCC: 5 | RNVC: 9
2904: RNCC: 5 | RNVC: 9
30E: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-697-2951
Wire Strand Hanger Support Strap

016972951
C10-118PKG: RNCC: 3 | RNVC: 2
C10-118: RNCC: 3 | RNVC: 9

13 Sep 2021

5975-01-698-5439
Blank Panel

016985439
ACC-P-1SCSI-16RJ-G: RNCC: 3 | RNVC: 2

23 Nov 2021

5975-01-701-9046
Electrical Equipment Rack

017019046
5411550-1: RNCC: 3 | RNVC: 2

15 Jun 2022

5975-01-701-9294
Electrical Box Connector

017019294
717-509M20: RNCC: 3 | RNVC: 2
STD/0000107938: RNCC: 5 | RNVC: 1
70051833: RNCC: 5 | RNVC: 2

16 Jun 2022

5975-01-674-8203
Raceway Cover

016748203
EB3Z14A099F: RNCC: 3 | RNVC: 2
7423228777: RNCC: 5 | RNVC: 2
23228777: RNCC: 5 | RNVC: 2
EB3T14A099HA: RNCC: 5 | RNVC: 9

13 Aug 2018

5975-01-097-2100
Electrical Components Tie Down Strap

010972100
8L8413: RNCC: 3 | RNVC: 2
8L8413: RNCC: 5 | RNVC: 2
8L-8413: RNCC: 5 | RNVC: 2

7 Jul 1980

Load More Results