Premium Information is available for this item - Upgrade for $1 a day
5975-00-482-7386
Electrical Conduit Elbow
5975004827386 004827386 10-111444-26 10-111444-29
An item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT. View more Electrical Conduit Elbow
May 2023
2
Marketplace 5975-00-482-7386
Request a Quotation from participating marketplace vendors
Related Documents 5975-00-482-7386 2+ Documents (More...)
/fsg-59/fsc-5975/us
Restrictions 5975-00-482-7386
5975-00-482-7386 is a Electrical Conduit Elbow Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5975-00-482-7386
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- United States of America (ZZ)
Approved Sources 5975-00-482-7386
- Part Number
- Manufacturer
- Status
- 10-111444-26
- Manufacturer
- 59501 - Unison Industries Llc (Active)
- Primary Buy
- Primary Buy
- 10-111444-29
- 59501 - Unison Industries Llc (Active)
- Secondary Buy
- Secondary Buy
- 10-111444-29
- 77820 - Amphenol Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 10-111444-26
- 77820 - Amphenol Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
DLA Procurement Analysis 5975-00-482-7386
Management Data 5975-00-482-7386
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- PQ
- PRATT & WHITNEY ENGINES AND COMPONENTS, TF-30
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5975-00-482-7386
Freight Information 5975-00-482-7386
5975-00-482-7386 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 156643. A Sub NMFC of X. It has a NMFC Description of PLASTIC/RUBR BENDS ELBOWS/SWEEPS. 5975-00-482-7386 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 77670 which rates the freight between FCL and LCL. 5975-00-482-7386 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5975-00-482-7386 is not classified as a special type of cargo when transported by water. 5975-00-482-7386 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5975-00-482-7386 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: