What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 5 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 5 of 176

5975-01-675-1783
Electronic Equipment Mounting Tray

016751783
123AB92620-1: RNCC: 3 | RNVC: 2

27 Aug 2018

5975-01-285-1148
Cable Spacer

012851148
CSCS-M: RNCC: 3 | RNVC: 2
9713218108: RNCC: 5 | RNVC: 2
25233-00662: RNCC: 5 | RNVC: 9
25233-00662: RNCC: C | RNVC: 1

7 Sep 1988

5975-01-520-6132
Electrical Conduit Coupling Nut

015206132
982-8010: RNCC: 3 | RNVC: 2
9828010: RNCC: 5 | RNVC: 2
81.25439-0015: RNCC: 5 | RNVC: 2
15012529: RNCC: 5 | RNVC: 2
81254390015: RNCC: 5 | RNVC: 2
4KK773: RNCC: 5 | RNVC: 2
69.BD000-0892: RNCC: 5 | RNVC: 2
4KK773: RNCC: 5 | RNVC: 9

19 May 2004

5975-01-701-5550
Electrical Components Tie Down Strap

017015550
63471: RNCC: 3 | RNVC: 2

23 May 2022

5975-01-586-4203
Electrical Components Tie Down Strap

015864203
SAE-AS23190/3: RNCC: 3 | RNVC: 1
M23190/3-2: RNCC: 3 | RNVC: 2
M23190/3-2: RNCC: 3 | RNVC: 9
AS23190/3: RNCC: 5 | RNVC: 1
M23190/3-2: RNCC: 5 | RNVC: 9
AS23190/3: RNCC: 5 | RNVC: 9

29 Jun 2010

5975-01-617-1107
Electrical Box Sealing Flange

016171107
DRBF-2A: RNCC: 3 | RNVC: 2
54917-000: RNCC: 5 | RNVC: 2

12 Mar 2013

5975-01-565-6372
Junction Box

015656372
8M0165557: RNCC: 3 | RNVC: 2
878492K14: RNCC: 3 | RNVC: 9
898492K14: RNCC: 5 | RNVC: 9

31 Jul 2008

5975-01-428-6574
Electrical Conductor Bushing

014286574
MS3420-8: RNCC: 2 | RNVC: 2
MS3420: RNCC: 4 | RNVC: 1
204MS002P004: RNCC: 5 | RNVC: 1
3420-8: RNCC: 5 | RNVC: 1
756314-107: RNCC: 5 | RNVC: 1
30-04-2406-1215: RNCC: 5 | RNVC: 1
S204-1006P4: RNCC: 5 | RNVC: 1
901771-04: RNCC: 5 | RNVC: 1
306706-08: RNCC: 5 | RNVC: 1
18220-8: RNCC: 5 | RNVC: 1

29 Mar 1996

5975-00-655-3136
Electrical Box Connector

006553136
3401: RNCC: 3 | RNVC: 2
ST38: RNCC: 3 | RNVC: 2
5231: RNCC: 3 | RNVC: 2
710098-032: RNCC: 5 | RNVC: 1
CT38101: RNCC: 5 | RNVC: 1
710098-032: RNCC: 5 | RNVC: 1
5231: RNCC: 5 | RNVC: 1
20954: RNCC: 5 | RNVC: 2
4Q38: RNCC: 5 | RNVC: 9
11-38: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-034-5540
Electrical Cable Protector

010345540
M24705/1-BN2007: RNCC: 2 | RNVC: 2
M24705/1BN2007: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
MIL-P-24705/1: RNCC: 5 | RNVC: 9
20/7: RNCC: 5 | RNVC: 9
20/7: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-034-5544
Electrical Cable Protector

010345544
M24705/1-BN6034: RNCC: 2 | RNVC: 2
M24705/1BN6034: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
60/34: RNCC: 5 | RNVC: 9
60/34: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-305-5099
Electrical Conduit Locknut

013055099
BLSG100: RNCC: 3 | RNVC: 2
1204: RNCC: 5 | RNVC: 2
143SL: RNCC: 5 | RNVC: 2
SL3: RNCC: 5 | RNVC: 2
P-302-S: RNCC: 5 | RNVC: 9
SL-100: RNCC: 5 | RNVC: 9
SL-3: RNCC: 5 | RNVC: 9
143: RNCC: 5 | RNVC: 9
SLG-100S: RNCC: 5 | RNVC: 9
153SL: RNCC: 5 | RNVC: 9

6 Aug 1989

5975-00-983-9229
Electrical Box Connector

009839229
LMM-12: RNCC: 3 | RNVC: 1
3512: RNCC: 3 | RNVC: 2
LTR-50B: RNCC: 3 | RNVC: 2
LTB50G: RNCC: 3 | RNVC: 2
5332: RNCC: 5 | RNVC: 1
5332: RNCC: 5 | RNVC: 1
5332: RNCC: 5 | RNVC: 2
LTB-50: RNCC: 5 | RNVC: 9
MW650S: RNCC: 5 | RNVC: 9
1244141-7: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-906-2414
Electrical Components Tie Down Strap

009062414
SSC2SC: RNCC: 3 | RNVC: 1
13208E8536: RNCC: 3 | RNVC: 2
Q 314 174 012: RNCC: 5 | RNVC: 1
Q 314 174 012: RNCC: 5 | RNVC: 1
30-00105-001: RNCC: 5 | RNVC: 1
99028249: RNCC: 5 | RNVC: 1
STBS38F3: RNCC: 5 | RNVC: 1
11156274-1: RNCC: 5 | RNVC: 1
347C212H14: RNCC: 5 | RNVC: 1
TY35M: RNCC: 5 | RNVC: 1

1 Jan 1960

5975-00-913-9183
Electrical Box Connector

009139183
STB-90125: RNCC: 3 | RNVC: 2
5355: RNCC: 5 | RNVC: 2
4Q-9125-T: RNCC: 5 | RNVC: 9
12-125B: RNCC: 5 | RNVC: 9
LTB-12590: RNCC: 5 | RNVC: 9
12-125: RNCC: E | RNVC: 8
5255: RNCC: E | RNVC: 8
4Q-9125: RNCC: E | RNVC: 8
LT-12590: RNCC: E | RNVC: 8

1 Jan 1960

5975-00-279-1776
Electrical Tie Down Mounting Base

002791776
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3339-10-9: RNCC: 3 | RNVC: 2
MTP5H-E6: RNCC: 5 | RNVC: 1
VG 95387 PART 102-10-9: RNCC: 5 | RNVC: 1
TC1117: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
MTP5H-E6: RNCC: 5 | RNVC: 1
MS3339-10-9: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9

4 Aug 1973

5975-00-280-3263
Electrical Conduit Union

002803263
AA50553-1-1-G-1-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
WF406: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-153-6398
Junction Box

001536398
AA59214-2A4: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
192: RNCC: 5 | RNVC: 1
1180703: RNCC: 5 | RNVC: 1
192: RNCC: 5 | RNVC: 1
4SSP: RNCC: 5 | RNVC: 1
4SSPECIAL: RNCC: 5 | RNVC: 1
1180703: RNCC: 5 | RNVC: 1
4SSPL: RNCC: 5 | RNVC: 1
52151-1-2-3-4: RNCC: 5 | RNVC: 1

1 Jan 1961

5975-00-280-6083
Electrical Conduit Locknut

002806083
AN3066-20: RNCC: 2 | RNVC: 2
AN3066: RNCC: 4 | RNVC: 1
083-8: RNCC: 5 | RNVC: 1
B77159: RNCC: 5 | RNVC: 1
LS967-20: RNCC: 5 | RNVC: 1
6-1250: RNCC: 5 | RNVC: 1
6-2-20: RNCC: 5 | RNVC: 1
6-2E20: RNCC: 5 | RNVC: 1
6-1250: RNCC: 5 | RNVC: 9
6-2-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7537
Junction Box

002807537
UL-50: RNCC: 3 | RNVC: 1
ANSI UL50: RNCC: 3 | RNVC: 1
MIL-J-21978: RNCC: 5 | RNVC: 9
WJ800: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-178-1214
Rigid Metal Conduit

001781214
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
WC581: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-280-7941
Stuffing Tube Packing Nut

002807941
M24235-9-063: RNCC: 2 | RNVC: 2
M24235/9-063: RNCC: 2 | RNVC: 2
MILS24235-9: RNCC: 4 | RNVC: 1
MIL-S-24235/9: RNCC: 4 | RNVC: 1
9S5166LPC13C: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-284-5827
Junction Box

002845827
A-A-59214-3C7: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
5184921: RNCC: 5 | RNVC: 1
5184921: RNCC: 5 | RNVC: 1
104: RNCC: 5 | RNVC: 1
4SSL1/2DR: RNCC: 5 | RNVC: 1
SYM730P1: RNCC: 5 | RNVC: 1
GJ800V1: RNCC: 5 | RNVC: 1
063500-0000: RNCC: 5 | RNVC: 1
4SSL1-2: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-01-008-5941
Electrical Components Tie Down Strap

010085941
SST2S: RNCC: 3 | RNVC: 2
3181251: RNCC: 5 | RNVC: 1
91254307: RNCC: 5 | RNVC: 1
0538001: RNCC: 5 | RNVC: 1
0140189K00: RNCC: 5 | RNVC: 1
2422-015-05034: RNCC: 5 | RNVC: 1
M4ZS301D2116: RNCC: 5 | RNVC: 1
91319533: RNCC: 5 | RNVC: 1
5000787121: RNCC: 5 | RNVC: 1
30144-0000: RNCC: 5 | RNVC: 9

26 Aug 1975

5975-00-881-2945
Electrical Box Connector

008812945
AA50552-001-3-J: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1
4128B6-2: RNCC: 5 | RNVC: 1
5346: RNCC: 5 | RNVC: 1
STB-45150: RNCC: 5 | RNVC: 1
H15041: RNCC: 5 | RNVC: 1
84001066-076: RNCC: 5 | RNVC: 9
4Q-4150-IT: RNCC: 5 | RNVC: 9
W-F-406: RNCC: 5 | RNVC: 9
13-150B: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-061-7035
Cable Strain Relief Bushing

000617035
SR6W1BLACK: RNCC: 3 | RNVC: 2
2035-009: RNCC: 5 | RNVC: 2
6401100076: RNCC: 5 | RNVC: 2
P-6854: RNCC: 5 | RNVC: 2
SR-6W-1: RNCC: 5 | RNVC: 2
CE9741: RNCC: 5 | RNVC: 2
12718830-7: RNCC: 5 | RNVC: 2
1184: RNCC: 5 | RNVC: 2
543-888: RNCC: 5 | RNVC: 2
543-888: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-034-5533
Electrical Cable Protector

010345533
M24705/1-BN3017: RNCC: 2 | RNVC: 2
M24705/1BN3017: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
30/17: RNCC: 5 | RNVC: 2
30/17: RNCC: 5 | RNVC: 9
30/17: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-00-615-9169
Electrical Box Connector

006159169
ST200: RNCC: 3 | RNVC: 2
5237: RNCC: 5 | RNVC: 1
5237: RNCC: 5 | RNVC: 2
2042-6205-00: RNCC: 5 | RNVC: 9
20226: RNCC: 5 | RNVC: 9
20226: RNCC: 5 | RNVC: 9
E-25-S: RNCC: 5 | RNVC: 9
4Q200: RNCC: 5 | RNVC: 9
LT-200: RNCC: 5 | RNVC: 9
11-200: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-703-2698
Electrical-Electronic Equipment Chassis

017032698
8585092-10: RNCC: 3 | RNVC: 9

26 Aug 2022

5975-01-664-8142
Strain Electrical Conductor Clamp

016648142
JM44LC39S105RG: RNCC: 3 | RNVC: 1
BACC10GU105: RNCC: 5 | RNVC: 1
JM44LC39S105: RNCC: 5 | RNVC: 9

7 Jul 2017

5975-01-707-6431
Electrical-Electronic Equipment Chassis

017076431
GX7012C: RNCC: 3 | RNVC: 2

14 Feb 2023

5975-01-707-4327
Electrical-Electronic Equipment Chassis

017074327
RMK01: RNCC: 3 | RNVC: 2

1 Feb 2023

5975-01-706-3896
Electrical-Electronic Equipment Chassis

017063896
778636-01: RNCC: 3 | RNVC: 1

21 Nov 2022

5975-01-699-4913
Electrical Equipment Cabinet Case

016994913
DMD-4552 STBD: RNCC: 3 | RNVC: 2
571-170140: RNCC: D | RNVC: 9

3 Feb 2022

5975-01-702-6447
Electrical-Electronic Equipment Chassis

017026447
182501: RNCC: 3 | RNVC: 2

19 Jul 2022

5975-01-703-1451
Electrical Tie Down Mounting Base

017031451
8250359-4: RNCC: 3 | RNVC: 2
8250359: RNCC: D | RNVC: 9

19 Aug 2022

5975-01-703-3987
Electrical-Electronic Equipment Chassis

017033987
X0606-00034-041: RNCC: 3 | RNVC: 2
X0606-00034: RNCC: D | RNVC: 9

6 Sep 2022

5975-01-702-0229
Electrical Cable Ground Guard

017020229
12617736: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-1393
Electrical Equipment Cabinet

017021393
12639084: RNCC: 3 | RNVC: 2

22 Jun 2022

5975-01-702-7728
Electrical Nonmetallic Conduit Assembly

017027728
57350-20FT0IN: RNCC: 3 | RNVC: 1

27 Jul 2022

5975-01-702-8350
Electrical Equipment Rack

017028350
ALH-215488-001: RNCC: 3 | RNVC: 2

1 Aug 2022

5975-01-703-0149
Electrical-Electronic Equipment Chassis

017030149
13740701-1: RNCC: 1 | RNVC: 2
CAP005275: RNCC: 3 | RNVC: 2

11 Aug 2022

5975-01-702-0218
Electrical Cable Ground Guard

017020218
12596900: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-5832
Electrical Tie Down Mounting Base

017025832
ABMT-A-C: RNCC: 3 | RNVC: 2
G744615-3: RNCC: 3 | RNVC: 2

15 Jul 2022

5975-01-701-7705
Electrical Equipment Rack

017017705
11461581-2: RNCC: 3 | RNVC: 2

7 Jun 2022

5975-01-701-7713
Modular Chassis

017017713
11456580-2: RNCC: 3 | RNVC: 2

7 Jun 2022

5975-01-702-0226
Electrical Cable Ground Guard

017020226
12596925: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-700-9427
Electronic Equipment Mounting Tray

017009427
123AB93631-3: RNCC: 3 | RNVC: 2

21 Apr 2022

5975-01-701-9940
Electrical Conduit Wye

017019940
12639379: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-701-9937
Electrical Conduit Tee

017019937
12639362: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0162
Electrical Cable Nipple

017020162
232E4V02: RNCC: 3 | RNVC: 2

21 Jun 2022

5975-01-702-0503
Mounting Plate

017020503
ALH-214516-001: RNCC: 3 | RNVC: 2
ALH-214516: RNCC: D | RNVC: 9

21 Jun 2022

5975-01-701-4335
Rigid Metal Conduit Assembly

017014335
749-1113-2: RNCC: 3 | RNVC: 2
4043AS4119-2: RNCC: 7 | RNVC: 2
4043AS4119: RNCC: D | RNVC: 9

17 May 2022

5975-01-701-6733
Electrical Equipment Shelf

017016733
77A580883G8-C001: RNCC: 3 | RNVC: 2

31 May 2022

5975-01-701-6214
Electrical-Electronic Equipment Panel

017016214
AY040823: RNCC: 3 | RNVC: 2
1025637P-6: RNCC: 7 | RNVC: 2
1025637P: RNCC: D | RNVC: 9

26 May 2022

5975-00-681-4068
Electrical Conduit Adapter

006814068
RB150-50: RNCC: 3 | RNVC: 2
RE51: RNCC: 3 | RNVC: 2
1148: RNCC: 5 | RNVC: 1
RB-151: RNCC: 5 | RNVC: 1
607: RNCC: 5 | RNVC: 1
RE-51: RNCC: 5 | RNVC: 1
RB-330: RNCC: 5 | RNVC: 9
1167: RNCC: 5 | RNVC: 9
358-S: RNCC: 5 | RNVC: 9
RB-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-255-9578
Flexible Nonmetallic Conduit

012559578
M81914/2-1003: RNCC: 3 | RNVC: 2
M81914/2-1002: RNCC: 3 | RNVC: 2
QPL-AS81914: RNCC: 5 | RNVC: 1
M81914/2-1002: RNCC: 5 | RNVC: 2
AMS-T-81914/1: RNCC: 5 | RNVC: 9
M81914/1-1002: RNCC: 5 | RNVC: 9
MIL-T-81914/1: RNCC: 5 | RNVC: 9
AMS-T-81914/1: RNCC: 5 | RNVC: 9
M81914/1-1002: RNCC: 5 | RNVC: 9
M81914/1-1002: RNCC: 5 | RNVC: 9

30 May 1987

5975-00-933-0104
Conduit Outlet

009330104
AA50563-104ATTAA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
T19: RNCC: 5 | RNVC: 1
T50-A: RNCC: 5 | RNVC: 1
QAP-002: RNCC: 5 | RNVC: 1
16200: RNCC: 5 | RNVC: 9
T41: RNCC: 5 | RNVC: 9
10-56: RNCC: 5 | RNVC: 9
T-19: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

8 May 1968

5975-01-033-9612
Electrical Cable Protector

010339612
M24705/1-BN1506: RNCC: 2 | RNVC: 2
M24705/1BN1506: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
15/6: RNCC: 5 | RNVC: 1
MIL-P-24705/1: RNCC: 5 | RNVC: 9
15/6: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-01-033-9614
Electrical Cable Protector

010339614
M24705/1-BN1508: RNCC: 2 | RNVC: 2
M24705/1BN1508: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
15/8: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
15/8: RNCC: 5 | RNVC: 9
MIL-DTL-24705: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-01-034-3437
Electrical Cable Protector

010343437
M24705/1-BN6042: RNCC: 2 | RNVC: 2
M24705/1BN6042: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
M24705: RNCC: 5 | RNVC: 9
60/42: RNCC: 5 | RNVC: 9
60/42: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-01-034-5531
Electrical Cable Protector

010345531
M24705/1-BN3020: RNCC: 2 | RNVC: 2
M24705/1BN3020: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
30/20: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
30/20: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-630-4732
Electrical-Electronic Equipment Chassis

016304732
125821DM: RNCC: 3 | RNVC: 2

5 Aug 2014

5975-01-691-5368
Electrical Equipment Mounting Base

016915368
LM-446-SA8: RNCC: 3 | RNVC: 2
9448121154: RNCC: 5 | RNVC: 2

15 Oct 2020

5975-01-703-2714
Electrical-Electronic Equipment Chassis

017032714
8585135-10: RNCC: 3 | RNVC: 9

26 Aug 2022

5975-00-518-0689
Conduit Chase Nipple

005180689
AA50553-3-1-T-1-08M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
849: RNCC: 5 | RNVC: 1
HA-408: RNCC: 5 | RNVC: 1
WF408TY3CL1KDTST108: RNCC: 5 | RNVC: 1
CN-300: RNCC: 5 | RNVC: 1
1612: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9
7-300: RNCC: 5 | RNVC: 9
1109: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5975-01-521-3063 015213063 MOUNTING BASE,ELECTRICAL EQUIPMENT

5975-01-521-3063
Electrical Equipment Mounting Base

015213063
13012028: RNCC: 1 | RNVC: 2
987-5006-001: RNCC: 3 | RNVC: 2
PLV-H15-2029-01: RNCC: 5 | RNVC: 1
193318940: RNCC: 5 | RNVC: 2
1030-INMT-5006: RNCC: 5 | RNVC: 2
987-5006-001: RNCC: 5 | RNVC: 2
193318932: RNCC: 5 | RNVC: 2
3DM-INMT-5006: RNCC: 5 | RNVC: 2
987-5006-001: RNCC: 5 | RNVC: 2
987-5006-001: RNCC: 5 | RNVC: 2

17 Jun 2004

NSN 5975-00-727-5153 007275153 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-727-5153
Electrical Components Tie Down Strap

007275153
TY523M: RNCC: 3 | RNVC: 1
SAE-AS23190: RNCC: 3 | RNVC: 1
SST1M-C: RNCC: 3 | RNVC: 2
MS3367-4-9: RNCC: 3 | RNVC: 2
88-20018-2: RNCC: 3 | RNVC: 2
81551410000: RNCC: 5 | RNVC: 1
999/4/43079/304: RNCC: 5 | RNVC: 1
VG95387-100: RNCC: 5 | RNVC: 1
4099-0015: RNCC: 5 | RNVC: 1
273.523308: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-01-509-3916
Electrical Components Tie Down Strap

015093916
02805: RNCC: 3 | RNVC: 2
AL-07-05-0-C: RNCC: 3 | RNVC: 2
7130K59: RNCC: 5 | RNVC: 2

20 Jun 2003

5975-01-713-5698

017135698
431-002NFA04B03C04D02: RNCC: 3 | RNVC: 2
431-002: RNCC: D | RNVC: 9

5975-01-714-0946

017140946
5-4-4875: RNCC: 3 | RNVC: 2
B-8-C 350: RNCC: 3 | RNVC: 9
12-1-C: RNCC: 5 | RNVC: 2
12-1-C: RNCC: 5 | RNVC: 9

5975-01-674-6667
Electrical Tie Down Mounting Base

016746667
MLT12SH-Q316: RNCC: 3 | RNVC: 2
NCMLT12SH-C316: RNCC: 5 | RNVC: 9

7 Aug 2018

5975-01-713-4279

017134279
18008E2307-0: RNCC: 3 | RNVC: 2
18008E2307: RNCC: D | RNVC: 9

5975-01-496-9982
Flexible Metal Conduit

014969982
P2-40634: RNCC: 3 | RNVC: 2
P2-40634: RNCC: 5 | RNVC: 2
55341: RNCC: 5 | RNVC: 9
SM-50 ITEM NO.28: RNCC: 5 | RNVC: 9

6 May 2002

5975-01-386-0657
Cable Insert Block

013860657
RM15: RNCC: 3 | RNVC: 2
12665975-02: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
RM15: RNCC: 5 | RNVC: 9
12665975: RNCC: D | RNVC: 9

26 Jan 1994

5975-01-351-1159
Electrical Components Tie Down Strap

013511159
SAE-AS23190/3: RNCC: 3 | RNVC: 1
M23190/3-1: RNCC: 3 | RNVC: 2
AS23190/3: RNCC: 5 | RNVC: 1
M23190/3-1: RNCC: 5 | RNVC: 9
M23190/3-1: RNCC: 5 | RNVC: 9
AS23190/3: RNCC: 5 | RNVC: 9

31 Dec 1991

5975-01-386-6570
Cable Insert Block

013866570
RM40: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
RM40: RNCC: 5 | RNVC: 2
RM00100401000: RNCC: 5 | RNVC: 2
RM00100401000: RNCC: 5 | RNVC: 2
RM40: RNCC: 5 | RNVC: 2
RM00100401000: RNCC: 5 | RNVC: 9
RM40: RNCC: 5 | RNVC: 9
RM40: RNCC: 5 | RNVC: 9
RM40: RNCC: 5 | RNVC: 9

10 Feb 1994

5975-00-296-0541
Electrical Conduit Locknut

002960541
083-2: RNCC: 3 | RNVC: 2
7711166-16: RNCC: 3 | RNVC: 2
7711166P16: RNCC: 3 | RNVC: 2
7711166PT16: RNCC: 3 | RNVC: 2
AN3066-4: RNCC: 5 | RNVC: 2
AN3066-4: RNCC: 5 | RNVC: 2
6-2-4: RNCC: 5 | RNVC: 2
6-2-4: RNCC: 5 | RNVC: 9
16488: RNCC: 5 | RNVC: 9
C364: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7445
Junction Box Cover

002807445
AA59214-8C16: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
832: RNCC: 5 | RNVC: 1
832: RNCC: 5 | RNVC: 1
72C1: RNCC: 5 | RNVC: 1
72C1: RNCC: 5 | RNVC: 1
600: RNCC: 5 | RNVC: 1
72C1: RNCC: 5 | RNVC: 1
0B8487: RNCC: 5 | RNVC: 1
F05: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-422-0613
Electrical Tie Down Mounting Base

004220613
MS3339-3-9: RNCC: 2 | RNVC: 2
MTP3S-E6: RNCC: 5 | RNVC: 1
AS33391: RNCC: 5 | RNVC: 1
211078416: RNCC: 5 | RNVC: 1
SAE-AS23190: RNCC: 5 | RNVC: 1
MTP3SE6: RNCC: 5 | RNVC: 9

2 Feb 1972

5975-00-965-8334
Electrical Wall Plate

009658334
SS82: RNCC: 3 | RNVC: 2
HW-E0239-001: RNCC: 5 | RNVC: 1
97102: RNCC: 5 | RNVC: 2
84016: RNCC: 5 | RNVC: 9
97102: RNCC: 5 | RNVC: 9
20DR-SS: RNCC: 5 | RNVC: 9
S82: RNCC: E | RNVC: 8
S82: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-802-6531
Electrical Box Connector

008026531
AA50553-1-2-L-2-02-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
86T075: RNCC: 5 | RNVC: 1
5223: RNCC: 5 | RNVC: 1
5223: RNCC: 5 | RNVC: 1
TC-712: RNCC: 5 | RNVC: 1
5-4-5057: RNCC: 5 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
534972-2: RNCC: 5 | RNVC: 9
1176-S: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-578-3666
Electrical Box Connector

005783666
AA50552-I-3-I-1: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1
272M0059P002: RNCC: 5 | RNVC: 1
5232: RNCC: 5 | RNVC: 1
LT-101: RNCC: 5 | RNVC: 1
11024885: RNCC: 5 | RNVC: 1
325937: RNCC: 5 | RNVC: 1
773735-2: RNCC: 5 | RNVC: 1
0221: RNCC: 5 | RNVC: 1
ST-50: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-01-038-7389
Electrical Cable Protector

010387389
M24705/1-BN3012: RNCC: 2 | RNVC: 2
M24705/1BN3012: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
30/12: RNCC: 5 | RNVC: 2
M24705: RNCC: 5 | RNVC: 9
30/12: RNCC: 5 | RNVC: 9
30/12: RNCC: 5 | RNVC: 9

11 Apr 1977

5975-00-982-2299
Blank Panel

009822299
PA1103HG: RNCC: 3 | RNVC: 2
ARP-519: RNCC: 5 | RNVC: 2
NAL1103: RNCC: 5 | RNVC: 2
QMPA19525X: RNCC: 5 | RNVC: 2
19525: RNCC: 5 | RNVC: 9
ARP-519GRAY H-TONE: RNCC: 5 | RNVC: 9
A19/514/18GH: RNCC: 5 | RNVC: 9
9A-2225GRAY HT: RNCC: 5 | RNVC: 9
PA-1103-MG: RNCC: 5 | RNVC: 9
16966: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-054-6967
Electrical Box Connector

010546967
11588831: RNCC: 3 | RNVC: 1
2272: RNCC: 3 | RNVC: 2
CGE294: RNCC: 5 | RNVC: 1
2272: RNCC: 5 | RNVC: 1
SR9-755: RNCC: 5 | RNVC: 9
SR-975-500: RNCC: 5 | RNVC: 9
CGE294: RNCC: 5 | RNVC: 9
5975009302348: RNCC: 5 | RNVC: 9
5975PL1483188: RNCC: 6 | RNVC: 9
5975009302348: RNCC: 6 | RNVC: 9

25 Jan 1978

5975-00-265-7772
Knockout Reducing Washer

002657772
3707: RNCC: 3 | RNVC: 2
WA-142: RNCC: 5 | RNVC: 1
1369: RNCC: 5 | RNVC: 2
369: RNCC: 5 | RNVC: 9
13404: RNCC: 5 | RNVC: 9
1453-B: RNCC: 5 | RNVC: 9
RW-6S: RNCC: 5 | RNVC: 9
1065: RNCC: 5 | RNVC: 9
RW131: RNCC: 5 | RNVC: 9
402: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1144
Electrical Box Connector

001521144
AA50552-00I-4-M-N-SZ0.375: RNCC: 2 | RNVC: 2
AA50552: RNCC: 4 | RNVC: 1
NC-301: RNCC: 5 | RNVC: 1
675023P1: RNCC: 5 | RNVC: 1
922622-1: RNCC: 5 | RNVC: 1
033575-0001: RNCC: 5 | RNVC: 1
5156263: RNCC: 5 | RNVC: 1
PDB75367-24: RNCC: 5 | RNVC: 1
127-0312-001: RNCC: 5 | RNVC: 1
SP3302: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-628-7714
Electrical Cable Nipple

006287714
362-0019-000: RNCC: 3 | RNVC: 2
K137043: RNCC: 5 | RNVC: 2
28F473: RNCC: 5 | RNVC: 2
362-0019-000: RNCC: 5 | RNVC: 2
BU-32-0: RNCC: 5 | RNVC: 2
10361162: RNCC: 5 | RNVC: 2
9113527: RNCC: 5 | RNVC: 2
916B326-17: RNCC: 5 | RNVC: 9
32BLACK: RNCC: 5 | RNVC: 9
916B326-17: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-775-5267
Electrical Conduit Locknut

007755267
148: RNCC: 3 | RNVC: 2
148: RNCC: 5 | RNVC: 9
LN108: RNCC: 5 | RNVC: 9
BL300: RNCC: 5 | RNVC: 9
1012: RNCC: 5 | RNVC: 9
10808: RNCC: 5 | RNVC: 9
308: RNCC: 5 | RNVC: 9
108: RNCC: 5 | RNVC: 9
1-300: RNCC: 5 | RNVC: 9
108-DC: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-926-0611
Conduit Outlet

009260611
SMB461258-1: RNCC: 3 | RNVC: 2
SMB461258-1: RNCC: 5 | RNVC: 2
G3010B: RNCC: 5 | RNVC: 9
12443797: RNCC: 7 | RNVC: 2

24 Jan 1966

5975-00-153-6775
Junction Box Cover

001536775
AA59214-8B4: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
0B8403: RNCC: 5 | RNVC: 1
722: RNCC: 5 | RNVC: 1
500: RNCC: 5 | RNVC: 1
54C1: RNCC: 5 | RNVC: 1
8105564: RNCC: 5 | RNVC: 1
8403: RNCC: 5 | RNVC: 1
8105564: RNCC: 5 | RNVC: 1
8104624: RNCC: 5 | RNVC: 1

1 Jan 1961

5975-01-033-9758
Transit Compression Plate

010339758
M24705/1-CA1A: RNCC: 2 | RNVC: 2
M24705/1CA1A: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
MIL-P-24705: RNCC: 5 | RNVC: 9
ALUMINUM COMPRESSION PLATE: RNCC: 5 | RNVC: 9
ALUMINUM COMPRESSION PLATE: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-00-642-7261
Electrical Conduit Locknut

006427261
AA50553-3-1-P-02-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
HL104-4: RNCC: 5 | RNVC: 1
LN5: RNCC: 5 | RNVC: 1
142: RNCC: 5 | RNVC: 1
160633: RNCC: 5 | RNVC: 1
105R200P57: RNCC: 5 | RNVC: 1
BL75: RNCC: 5 | RNVC: 1
142: RNCC: 5 | RNVC: 1
SM-A-949358-53: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-01-034-3438
Electrical Cable Protector

010343438
M24705/1-BN6044: RNCC: 2 | RNVC: 2
M24705/1BN6044: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
60/44: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9
60/44: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-00-152-1147
Electrical Box Connector

001521147
AA50552-00I-1-A-D-SZ0.750: RNCC: 2 | RNVC: 2
AA50552: RNCC: 4 | RNVC: 1
XC-402: RNCC: 5 | RNVC: 1
255V: RNCC: 5 | RNVC: 1
528: RNCC: 5 | RNVC: 1
2103: RNCC: 5 | RNVC: 1
7482-2: RNCC: 5 | RNVC: 1
7482V: RNCC: 5 | RNVC: 1
CU1007-2: RNCC: 5 | RNVC: 1
13218E0003-3: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-152-1124
Electrical Box Connector

001521124
AA50552-00I-1-D-F-SZ1.250: RNCC: 2 | RNVC: 2
AA50552: RNCC: 4 | RNVC: 1
274: RNCC: 5 | RNVC: 1
2205: RNCC: 5 | RNVC: 1
8108331: RNCC: 5 | RNVC: 1
XC-494: RNCC: 5 | RNVC: 1
FED-STD-157: RNCC: 5 | RNVC: 9
W-F-406: RNCC: 5 | RNVC: 9
808: RNCC: 5 | RNVC: 9
AC-125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-1669
Electrical Box Connector

002961669
CGB193: RNCC: 3 | RNVC: 1
2521: RNCC: 3 | RNVC: 2
3702-2: RNCC: 3 | RNVC: 2
MFAG0820: RNCC: 3 | RNVC: 9
2521: RNCC: 5 | RNVC: 2
033581-0003: RNCC: 5 | RNVC: 2
4803132-2: RNCC: 5 | RNVC: 2
13226E8697-1: RNCC: 5 | RNVC: 2
770-42: RNCC: 5 | RNVC: 2
2521: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-152-1094
Electrical Conduit Bushing

001521094
AA50553-3-1-Q-1-02-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
14DA3: RNCC: 5 | RNVC: 1
123: RNCC: 5 | RNVC: 1
BU-402: RNCC: 5 | RNVC: 1
109401002: RNCC: 5 | RNVC: 1
BU50: RNCC: 5 | RNVC: 1
3212387: RNCC: 5 | RNVC: 1
123: RNCC: 5 | RNVC: 1
1103: RNCC: 5 | RNVC: 1

1 Jan 1961

5975-00-152-1095
Electrical Conduit Bushing

001521095
1102: RNCC: 3 | RNVC: 2
10772429-006: RNCC: 5 | RNVC: 1
122: RNCC: 5 | RNVC: 1
330C966H22: RNCC: 5 | RNVC: 1
122: RNCC: 5 | RNVC: 1
501703: RNCC: 5 | RNVC: 1
51233: RNCC: 5 | RNVC: 1
BU-401: RNCC: 5 | RNVC: 2
95-22: RNCC: 5 | RNVC: 9
109401001: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-0531
Electrical Box Connector

006810531
AA50552-001-1-C-C: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1
7245V: RNCC: 5 | RNVC: 1
2221: RNCC: 5 | RNVC: 1
265: RNCC: 5 | RNVC: 1
265: RNCC: 5 | RNVC: 1
W-F-406: RNCC: 5 | RNVC: 9
800: RNCC: 5 | RNVC: 9
AC38: RNCC: 5 | RNVC: 9
265: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-231-5927
Electrical Conduit Adapter

002315927
RE62: RNCC: 3 | RNVC: 2
RB200-75: RNCC: 5 | RNVC: 1
1153: RNCC: 5 | RNVC: 1
RE-62: RNCC: 5 | RNVC: 1
612: RNCC: 5 | RNVC: 2
CF8216: RNCC: 5 | RNVC: 9
13312: RNCC: 5 | RNVC: 9
363-S: RNCC: 5 | RNVC: 9
1172: RNCC: 5 | RNVC: 9
RB334: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-653-5249
Electrical-Electronic Equipment Chassis

016535249
408177-S-2827: RNCC: 3 | RNVC: 2

27 Mar 2016

5975-01-333-7140
Electrical Components Tie Down Strap

013337140
TY525MXR: RNCC: 3 | RNVC: 2
TY525MXR: RNCC: 5 | RNVC: 2
24312017: RNCC: 5 | RNVC: 2
99240288: RNCC: 5 | RNVC: 2
N24312017: RNCC: 5 | RNVC: 2
TY525MXR: RNCC: 5 | RNVC: 9
TY525MXR: RNCC: 5 | RNVC: 9
TY-525MX-O: RNCC: 5 | RNVC: 9

8 Feb 1991

5975-01-698-6361
Electrical-Electronic Equipment Chassis

016986361
COM360: RNCC: 3 | RNVC: 2

1 Dec 2021

5975-01-653-5250
Electrical-Electronic Equipment Chassis

016535250
781812-01: RNCC: 3 | RNVC: 2
781812-01: RNCC: 3 | RNVC: 2
4027AS0801-01: RNCC: 5 | RNVC: 2
4027AS0801: RNCC: D | RNVC: 9

27 Mar 2016

5975-01-701-8317
Electrical-Electronic Equipment Chassis

017018317
11456581-2: RNCC: 3 | RNVC: 2

10 Jun 2022

5975-01-703-0980
Electrical-Electronic Equipment Chassis

017030980
8269423-38: RNCC: 3 | RNVC: 2
31R3308: RNCC: 5 | RNVC: 2
8269423-38: RNCC: 5 | RNVC: 2
8269423: RNCC: D | RNVC: 9

16 Aug 2022

5975-01-698-8692
Electrical-Electronic Equipment Chassis

016988692
ECF0001600221: RNCC: 3 | RNVC: 2
8289050/REV B ITEM 17: RNCC: D | RNVC: 9

16 Dec 2021

5975-01-701-7236
Electrical-Electronic Equipment Chassis

017017236
11456582-2: RNCC: 3 | RNVC: 2

3 Jun 2022

5975-01-708-3913
Stuffing Tube

017083913
M24235/18-151: RNCC: 2 | RNVC: 2

4 Apr 2023

5975-01-690-3052
Electrical-Electronic Equipment Chassis

016903052
12050-3000-16: RNCC: 3 | RNVC: 2
12050-3000-15: RNCC: 3 | RNVC: 2

5 Aug 2020

5975-01-682-9823
Electrical Equipment Rack

016829823
189K086G03: RNCC: 3 | RNVC: 2
189K086G04: RNCC: 3 | RNVC: 2
189K086: RNCC: D | RNVC: 9

3 Sep 2019

5975-01-711-0865
Electrical Components Tie Down Strap

017110865
761956-3: RNCC: 3 | RNVC: 2

19 Jul 2023

5975-01-711-0132
Electrical-Electronic Equipment Chassis

017110132
63E920499G3: RNCC: 3 | RNVC: 2
63E920499: RNCC: D | RNVC: 9

14 Jul 2023

5975-01-710-9015
Electrical-Electronic Equipment Panel

017109015
613486-7: RNCC: 3 | RNVC: 2
613486 FIND 17: RNCC: C | RNVC: 1
613486: RNCC: D | RNVC: 9

6 Jul 2023

5975-01-349-8398
Electrical Box Connector

013498398
JTP02RE24-35PN: RNCC: 3 | RNVC: 2
5254000: RNCC: 5 | RNVC: 2

5 Dec 1991

5975-01-668-9405
Hexagon Self-Locking Nut

016689405
4671: RNCC: 3 | RNVC: 2
12581005: RNCC: 7 | RNVC: 2

13 Dec 2017

5975-01-707-7834
Blank Panel

017077834
UFAF-1: RNCC: 3 | RNVC: 2

22 Feb 2023

5975-01-710-9094
Electrical Equipment Rack

017109094
1CM023A: RNCC: 3 | RNVC: 2

7 Jul 2023

5975-01-686-3233
Electronic Equipment Mounting Tray

016863233
8464547-1: RNCC: 3 | RNVC: 2
85VE002102-113: RNCC: 5 | RNVC: 2

7 Feb 2020

5975-01-577-1743
Stuffing Tube

015771743
RM00100201000: RNCC: 3 | RNVC: 2
3819536: RNCC: 5 | RNVC: 9
10013126: RNCC: 6 | RNVC: 9
3819536: RNCC: 7 | RNVC: 2
12603037: RNCC: 7 | RNVC: 2

27 Aug 2009

5975-01-653-5275
Electrical-Electronic Equipment Chassis

016535275
1109331: RNCC: 3 | RNVC: 2
1109331: RNCC: 5 | RNVC: 2

27 Mar 2016

5975-01-126-9065
Electrical Tie Down Mounting Base

011269065
EMS-A-C0: RNCC: 3 | RNVC: 2
A29066: RNCC: 5 | RNVC: 2
13160922: RNCC: 7 | RNVC: 2
13079109: RNCC: 7 | RNVC: 2
4950033: RNCC: C | RNVC: 1
EMS-A-0: RNCC: C | RNVC: 1

19 Feb 1982

5975-00-060-9488
Electrical Tie Down Mounting Base

000609488
113B6077: RNCC: 3 | RNVC: 2
533539-1: RNCC: 5 | RNVC: 1
TC104: RNCC: 5 | RNVC: 1
11741521: RNCC: 5 | RNVC: 1
126AS237: RNCC: 5 | RNVC: 1
124200W: RNCC: 5 | RNVC: 2
0124200W00: RNCC: 5 | RNVC: 2
50007881-002: RNCC: 5 | RNVC: 2
113B6077: RNCC: 5 | RNVC: 2
Q314174101: RNCC: 5 | RNVC: 2

13 Jun 1967

5975-00-194-8878
Junction Box

001948878
A-A-59214-2A2: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
451-2: RNCC: 5 | RNVC: 1
4S1-2: RNCC: 5 | RNVC: 1
52151 1-2: RNCC: 5 | RNVC: 1
0B4S1-2: RNCC: 5 | RNVC: 1
4SW1-2: RNCC: 5 | RNVC: 1
JP2050-1: RNCC: 5 | RNVC: 1
10441-12: RNCC: 5 | RNVC: 9
2400: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-8558
Conduit Chase Nipple

002808558
AA50553-3-1-T-1-01-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
67313: RNCC: 5 | RNVC: 1
W-F-408 TY3CL1KDTST1: RNCC: 5 | RNVC: 1
842: RNCC: 5 | RNVC: 1
148902003: RNCC: 5 | RNVC: 1
1551: RNCC: 5 | RNVC: 1
1602: RNCC: 5 | RNVC: 1
77A360: RNCC: 5 | RNVC: 1
43U: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-281-0051
Junction Box Cover

002810051
A-A-59214-8D30: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
2650-29-01: RNCC: 5 | RNVC: 1
0B8371: RNCC: 5 | RNVC: 1
452: RNCC: 5 | RNVC: 1
RS8: RNCC: 5 | RNVC: 1
H2650-1285 ITEM 40: RNCC: 5 | RNVC: 1
8371: RNCC: 5 | RNVC: 1
2650-29-01: RNCC: 5 | RNVC: 9
W-J-800: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-642-8502
Conduit Chase Nipple

006428502
AA50553-3-1-T-1-03-M: RNCC: 2 | RNVC: 2
A-A-50553A: RNCC: 4 | RNVC: 1
CN100: RNCC: 5 | RNVC: 1
D10733-26-43: RNCC: 5 | RNVC: 1
W-F-408 TY3CL1KDTST1: RNCC: 5 | RNVC: 1
844: RNCC: 5 | RNVC: 1
573438: RNCC: 5 | RNVC: 1
844: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9
0892-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-4720
Electrical Box Connector

006814720
3304: RNCC: 3 | RNVC: 2
3117: RNCC: 5 | RNVC: 2
27-100-IT: RNCC: 5 | RNVC: 9
KC 100 T: RNCC: 5 | RNVC: 9
KC-100-IT: RNCC: 5 | RNVC: 9
3137: RNCC: E | RNVC: 8

1 Jan 1960

5975-00-548-9556
Conduit Chase Nipple

005489556
AN3064-16: RNCC: 2 | RNVC: 2
AN3064-16: RNCC: 5 | RNVC: 1
A46440: RNCC: 5 | RNVC: 1
A61939: RNCC: 5 | RNVC: 1
900-90-16: RNCC: 5 | RNVC: 1
A18331C16: RNCC: 5 | RNVC: 1
28-12-16: RNCC: 5 | RNVC: 1
28-1000: RNCC: 5 | RNVC: 1
GF803P16: RNCC: 5 | RNVC: 9
28-1000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-034-3436
Electrical Cable Protector

010343436
M24705/1-BN4028: RNCC: 2 | RNVC: 2
M24705/1BN4028: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
40/28: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
40/28: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9

25 Jan 1977

5975-00-904-6222
Electrical Box Connector

009046222
STB-9075: RNCC: 3 | RNVC: 1
5353: RNCC: 3 | RNVC: 2
SM-A-949385-20: RNCC: 5 | RNVC: 1
5353: RNCC: 5 | RNVC: 1
STR7590B: RNCC: 5 | RNVC: 2
6401-IS: RNCC: 5 | RNVC: 9
12-75B: RNCC: 5 | RNVC: 9
LQ87590-IC: RNCC: 5 | RNVC: 9
4Q-975-T: RNCC: 5 | RNVC: 9
LTB7590: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-01-097-1843
Electronic Junction Rack

010971843
M81714/5-7: RNCC: 3 | RNVC: 2
M81714/5-7: RNCC: 3 | RNVC: 9
421-501-03-8: RNCC: 5 | RNVC: 1
AS81714/5: RNCC: 5 | RNVC: 1
591613-8: RNCC: 5 | RNVC: 1
421501-038: RNCC: 5 | RNVC: 1
3602-025-1107: RNCC: 5 | RNVC: 1
TJT701008: RNCC: 5 | RNVC: 2
M81714/5-7: RNCC: 5 | RNVC: 9
MRTB-8: RNCC: 5 | RNVC: 9

7 Jul 1980

5975-00-504-7670
Junction Box Cover

005047670
A-A-59214-8E47: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
772: RNCC: 5 | RNVC: 1
52C13: RNCC: 5 | RNVC: 1
403: RNCC: 5 | RNVC: 1
8468A: RNCC: 5 | RNVC: 1
QK417: RNCC: 5 | RNVC: 1
QK417: RNCC: 5 | RNVC: 1
QK417: RNCC: 5 | RNVC: 9
FEDSTD128TYPEVIIISIZEVSTYLE65: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-158-8486
Conduit Outlet Cover

001588486
270: RNCC: 3 | RNVC: 2
C202727-15: RNCC: 5 | RNVC: 2
C202727-24: RNCC: 5 | RNVC: 9
SC-62: RNCC: 5 | RNVC: 9
C202020-18: RNCC: 5 | RNVC: 9
C202727-11: RNCC: 5 | RNVC: 9
C202727-19: RNCC: 5 | RNVC: 9
C202727-2: RNCC: 5 | RNVC: 9
SC-75: RNCC: 5 | RNVC: 9
9023602PT1: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-702-2147
Electrical Conduit Bushing

007022147
AA50553-3-1-Q-2-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
1222: RNCC: 5 | RNVC: 1
BU501: RNCC: 5 | RNVC: 1
11263749-1: RNCC: 5 | RNVC: 1
1132: RNCC: 5 | RNVC: 1
1222: RNCC: 5 | RNVC: 1
GF803S1: RNCC: 5 | RNVC: 1
AA50553-III-1-Q-2: RNCC: 5 | RNVC: 1
BI-201: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-0534
Electrical Conduit Locknut

002960534
301043-1: RNCC: 3 | RNVC: 2
AN3066-6: RNCC: 3 | RNVC: 2
8100924: RNCC: 3 | RNVC: 2
5311023: RNCC: 5 | RNVC: 2
8820829: RNCC: 5 | RNVC: 2
650574-71: RNCC: 5 | RNVC: 2
6: RNCC: 5 | RNVC: 2
AN3066TYPEAN3066-6: RNCC: 5 | RNVC: 2
6-1-0375: RNCC: 5 | RNVC: 2
6-2-6: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-178-1501
Stuffing Tube

001781501
M24235-9-003: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-7921
Electrical Wall Plate

002807921
58C1: RNCC: 3 | RNVC: 1
ANSI UL514A: RNCC: 3 | RNVC: 1
2540: RNCC: 3 | RNVC: 1
860: RNCC: 3 | RNVC: 1
410GALV: RNCC: 3 | RNVC: 1
10001: RNCC: 3 | RNVC: 1
58C1: RNCC: 3 | RNVC: 1
UL 514A 4IN. X 2 1/8 IN: RNCC: 3 | RNVC: 2
W-P-455: RNCC: 5 | RNVC: 9
21A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-803-9934
Electrical Conduit Bushing

008039934
993: RNCC: 3 | RNVC: 2
BBU200: RNCC: 5 | RNVC: 1
L75PL: RNCC: 5 | RNVC: 1
227: RNCC: 5 | RNVC: 1
227: RNCC: 5 | RNVC: 2
330C966H14: RNCC: 5 | RNVC: 2
1408: RNCC: 5 | RNVC: 2
BBU200: RNCC: 5 | RNVC: 9
12305: RNCC: 5 | RNVC: 9
405: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-982-4465
Cable Hanger

009824465
400863: RNCC: 3 | RNVC: 2
SM-A-571570: RNCC: 3 | RNVC: 2
281910-0001: RNCC: 5 | RNVC: 2
12613035-20: RNCC: 5 | RNVC: 2
MODELCRS25: RNCC: 5 | RNVC: 2
CRS-25: RNCC: 5 | RNVC: 2
608Z0501-21: RNCC: 5 | RNVC: 9
7010416-001: RNCC: 5 | RNVC: 9
CRS-25: RNCC: 5 | RNVC: 9
69000-201: RNCC: 5 | RNVC: 9

14 Oct 1966

5975-00-578-2859
Electrical Conduit Bushing

005782859
1404: RNCC: 3 | RNVC: 2
224: RNCC: 3 | RNVC: 2
990: RNCC: 3 | RNVC: 2
PE4: RNCC: 3 | RNVC: 2
330C966H02: RNCC: 5 | RNVC: 1
BBU100: RNCC: 5 | RNVC: 1
224: RNCC: 5 | RNVC: 1
72D: RNCC: 5 | RNVC: 9
IB422: RNCC: 5 | RNVC: 9
EB29103: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-618-5554
Electrical-Electronic Equipment Chassis

016185554
1183830: RNCC: 3 | RNVC: 2
1183830: RNCC: 5 | RNVC: 2
1183830: RNCC: 5 | RNVC: 9

28 Apr 2013

5975-01-249-0636
Electrical-Electronic Equipment Panel

012490636
0N396787-501: RNCC: 3 | RNVC: 2

5 Feb 1987

5975-01-653-5237
Electrical-Electronic Equipment Chassis

016535237
408177-S-2826: RNCC: 3 | RNVC: 2

27 Mar 2016

5975-01-630-4731
Electrical-Electronic Equipment Chassis

016304731
106493DL: RNCC: 3 | RNVC: 2

5 Aug 2014

5975-01-653-5251
Electrical-Electronic Equipment Chassis

016535251
1109332: RNCC: 3 | RNVC: 2

27 Mar 2016

5975-01-630-4734
Electrical-Electronic Equipment Chassis

016304734
106493DM: RNCC: 3 | RNVC: 2

5 Aug 2014

5975-01-597-5214
Electrical Equipment Mounting Base

015975214
881250-16: RNCC: 3 | RNVC: 2
881250-16: RNCC: 5 | RNVC: 2

13 Jun 2011

5975-01-569-4870
Electronic Equipment Mounting Tray

015694870
RX1123-2: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-643-4143
Electrical Equipment Mounting Base

016434143
17P1E1492-1: RNCC: 3 | RNVC: 2

31 Mar 2015

5975-01-327-4426
Electrical Equipment Mounting Base

013274426
1891961: RNCC: 3 | RNVC: 2

14 Oct 1990

5975-01-487-8124
Electrical Equipment Mounting Base

014878124
881250-15: RNCC: 3 | RNVC: 2
881250-15: RNCC: 5 | RNVC: 2

20 Aug 2001

5975-01-241-4536
Electrical-Electronic Equipment Chassis

012414536
3324566: RNCC: 3 | RNVC: 2
3324566: RNCC: 3 | RNVC: 9

26 Sep 1986

5975-01-573-7027
Electrical Equipment Mounting Base

015737027
5283461-101-1: RNCC: 3 | RNVC: 2

2 May 2009

5975-01-569-4780
Electrical-Electronic Equipment Chassis

015694780
10-215126-5: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-545-2551
Electrical-Electronic Equipment Chassis

015452551
7040694-503: RNCC: 3 | RNVC: 2

6 Nov 2006

5975-01-578-6053
Electrical Equipment Mounting Base

015786053
M20-100573: RNCC: 3 | RNVC: 9

14 Oct 2009

5975-01-572-1561
Electrical-Electronic Equipment Chassis

015721561
RQ420-1: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-604-2985
Electrical-Electronic Equipment Panel

016042985
8129108-002: RNCC: 3 | RNVC: 2

2 Apr 2012

5975-01-570-6318
Electrical Equipment Mounting Base

015706318
862393-1: RNCC: 3 | RNVC: 2

8 Jan 2009

5975-01-148-2189
Strain Electrical Conductor Clamp

011482189
015-2423-000: RNCC: 3 | RNVC: 2
NP-MS-1466: RNCC: 5 | RNVC: 2

2 Mar 1983

5975-01-569-4877
Electronic Equipment Mounting Tray

015694877
RX458-16: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-604-2984
Electrical-Electronic Equipment Panel

016042984
8129108-003: RNCC: 3 | RNVC: 2

2 Apr 2012

5975-01-642-0829
Electrical-Electronic Equipment Chassis

016420829
114E7891G3: RNCC: 3 | RNVC: 2

11 Feb 2015

5975-01-562-1530
Electrical-Electronic Equipment Chassis

015621530
8240-1: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-01-569-4790
Electrical-Electronic Equipment Chassis

015694790
10-215127-1: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-662-0001
Electrical-Electronic Equipment Chassis

016620001
7191092-000: RNCC: 3 | RNVC: 2

22 Mar 2017

5975-01-616-0209
Electrical-Electronic Equipment Chassis

016160209
114E6227G2: RNCC: 3 | RNVC: 2

29 Jan 2013

5975-01-575-7374
Electronic Equipment Mounting Tray

015757374
7191173-00: RNCC: 3 | RNVC: 2

13 Jul 2009

5975-01-575-7375
Electronic Equipment Mounting Tray

015757375
7192187-00: RNCC: 3 | RNVC: 2

13 Jul 2009

5975-01-545-2524
Electrical-Electronic Equipment Chassis

015452524
1000033-00: RNCC: 3 | RNVC: 2

6 Nov 2006

5975-01-609-7464
Electrical Conduit Coupling Nut Clamp

016097464
K08-109-2: RNCC: 3 | RNVC: 2
T80148-002-07: RNCC: 3 | RNVC: 2
T80148-002: RNCC: 3 | RNVC: 2
9D0346-2: RNCC: 5 | RNVC: 2

1 Aug 2012

5975-01-569-4885
Electronic Equipment Mounting Tray

015694885
RX1983-14: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-693-4237
Electrical Conduit Adapter

016934237
121-100-1-1-32-B-E-T-E: RNCC: 3 | RNVC: 2
13670504-3: RNCC: 7 | RNVC: 2
13670504: RNCC: D | RNVC: 9

11 Feb 2021

5975-01-686-9067
Electrical-Electronic Equipment Panel

016869067
501-0123: RNCC: 3 | RNVC: 2

10 Mar 2020

5975-01-685-9739
Electrical Cable Protector

016859739
NV00243: RNCC: 3 | RNVC: 2

23 Jan 2020

5975-01-685-9878
Cable Hanger

016859878
NV00241: RNCC: 3 | RNVC: 2

24 Jan 2020

5975-01-670-8039
Electrical Wall Plate

016708039
6728: RNCC: 3 | RNVC: 2
14J393: RNCC: 5 | RNVC: 2

7 Mar 2018

5975-01-665-7116
No Item Name Available

9 Aug 2017

5975-01-663-0619
Electrical Equipment Shelf

25 Apr 2017

5975-01-661-9115
Electrical-Electronic Equipment Panel

016619115
04-20909: RNCC: 3 | RNVC: 2

20 Mar 2017

5975-01-661-8475
Stuffing Tube Adapter

016618475
M24758/15B-04-A: RNCC: 2 | RNVC: 2

17 Mar 2017

5975-01-659-3587
Ground Rod

016593587
GRDPM625: RNCC: 3 | RNVC: 2

21 Nov 2016

5975-01-659-2020
Rigid Nonmetallic Conduit

016592020
A52AG12: RNCC: 3 | RNVC: 2

9 Nov 2016

5975-01-659-0389
Electrical-Electronic Equipment Panel

016590389
0010-04-0079: RNCC: 3 | RNVC: 2
07011P2081: RNCC: 7 | RNVC: 2

1 Nov 2016

5975-01-654-9243
Electrical Components Tie Down Strap

016549243
VRT16S: RNCC: 3 | RNVC: 1

12 May 2016

5975-01-654-8982
Electrical Equipment Mounting Base

016548982
06988150: RNCC: 3 | RNVC: 2

12 May 2016

5975-01-654-8758
Electrical Equipment Rack

016548758
284T1722-302: RNCC: 3 | RNVC: 1

11 May 2016

5975-01-654-8295
Electrical Equipment Rack

016548295
284T2030-104: RNCC: 3 | RNVC: 1

10 May 2016

5975-01-654-7242
Electronic Equipment Mounting Tray

016547242
284T0131-206: RNCC: 3 | RNVC: 1

7 May 2016

5975-01-653-7892
Mounting Plate

016537892
233T5412-1: RNCC: 3 | RNVC: 1

5 Apr 2016

5975-01-653-7470
Electrical Equipment Shelf

016537470
284T2424-1: RNCC: 3 | RNVC: 1

4 Apr 2016

5975-01-653-2998
Electrical Components Tie Down Strap

016532998
MB310M4: RNCC: 3 | RNVC: 1

17 Mar 2016

5975-01-652-7499
Electrical Wall Plate

016527499
800-009168: RNCC: 3 | RNVC: 1

2 Mar 2016

5975-01-652-6032
Electrical Wall Plate

016526032
332B1518P: RNCC: 3 | RNVC: 1

27 Feb 2016

5975-01-652-5992
Electrical Wall Plate

016525992
800-009165: RNCC: 3 | RNVC: 1

27 Feb 2016

5975-01-652-4697
Electrical Wall Plate

016524697
800-000920: RNCC: 3 | RNVC: 1

23 Feb 2016

5975-01-651-9840
Conduit Outlet

5 Feb 2016

5975-01-650-0507
Electrical Grounding Plate

016500507
232A9115-13: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-648-4091
Electrical Equipment Drawer

016484091
AP-48063: RNCC: 3 | RNVC: 2
13022A1106-00: RNCC: 7 | RNVC: 2
13022A1106: RNCC: D | RNVC: 9

23 Sep 2015

5975-01-648-2162
Strain Electrical Conductor Clamp

016482162
115E1928P3: RNCC: 3 | RNVC: 2

18 Sep 2015

5975-01-647-7986
Junction Box

016477986
7000 100-230: RNCC: 3 | RNVC: 2
7000 100-230: RNCC: 5 | RNVC: 2
7001-000-285: RNCC: 5 | RNVC: 2
PL20706481-1 REV D ITEM 8: RNCC: 5 | RNVC: 2

2 Sep 2015

5975-01-645-1075
Electrical Equipment Rack

016451075
WSTRTUP-SB-00: RNCC: 3 | RNVC: 2

3 Jun 2015

5975-01-644-8902
Emi Filter A047 Nrp

016448902
50FCD10: RNCC: 3 | RNVC: 2

24 May 2015

5975-01-644-4679
Raceway Cover

016444679
09024B5194-03: RNCC: 3 | RNVC: 2

7 May 2015

5975-01-642-2388
Electrical Conductor Bushing

016422388
8-140-002-05: RNCC: 3 | RNVC: 2

18 Feb 2015

5975-01-632-4976
Electrical Equipment Mounting Base

016324976
6B00015: RNCC: 3 | RNVC: 2
8938951: RNCC: 5 | RNVC: 1

21 Oct 2014

5975-01-630-8942
Electrical Cable Protector

016308942
RM00140101000: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-630-1805
Electrical Equipment Rack

016301805
A20000-99-027-21: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-629-9087
Electrical Cable Protector

016299087
5200969-2: RNCC: 3 | RNVC: 2

18 Jul 2014

5975-01-628-9612
Electrical-Electronic Equipment Chassis

016289612
46K7877: RNCC: 3 | RNVC: 2

16 Jun 2014

5975-01-628-9434
Electrical Equipment Rack

016289434
T0001006: RNCC: 3 | RNVC: 2
7903: RNCC: 5 | RNVC: 2

16 Jun 2014

5975-01-628-7409
Electrical Conduit Bushing

016287409
CSBG-200P-A-.500SEG: RNCC: 3 | RNVC: 9

9 Jun 2014

5975-01-628-5597
Conduit Outlet

016285597
06A8150003: RNCC: 3 | RNVC: 2

30 May 2014

5975-01-628-5552
Conduit Outlet

30 May 2014

5975-01-628-3288
Electrical Equipment Mounting Base

016283288
901-031-363-128: RNCC: 3 | RNVC: 2

20 May 2014

5975-01-627-1206
Switch Box Case

016271206
1033059-001: RNCC: 3 | RNVC: 2

2 Apr 2014

5975-01-626-6589
Chassis Base

016266589
123AVM92601-1: RNCC: 3 | RNVC: 2

19 Mar 2014

5975-01-626-0646
Stuffing Tube

016260646
ASTM F1836M/1-002: RNCC: 4 | RNVC: 1
206-8463938ITEM15: RNCC: D | RNVC: 9

25 Feb 2014

5975-01-624-3811
Electrical-Electronic Equipment Panel

016243811
17-3-2547-2: RNCC: 3 | RNVC: 2

30 Dec 2013

5975-01-624-3732
Electrical Equipment Mounting Base

016243732
17-3-2546-2: RNCC: 3 | RNVC: 2

27 Dec 2013

5975-01-624-0685
Electrical Equipment Leg

016240685
057194-02-S: RNCC: 3 | RNVC: 2

14 Dec 2013

5975-01-624-0906
Electrical Equipment Rack

016240906
661618-B21: RNCC: 3 | RNVC: 2

16 Dec 2013

5975-01-623-8551
Electrical-Electronic Equipment Chassis

016238551
8517675-501: RNCC: 3 | RNVC: 2

4 Dec 2013

5975-01-623-0285
Cable Marker Sleeve

016230285
5M43Q4-L3G22: RNCC: 3 | RNVC: 2
5M43Q4-L3G22: RNCC: 5 | RNVC: 2
5M43Q4-L3G22: RNCC: 5 | RNVC: 2

29 Oct 2013

5975-01-623-0175
Rigid Metal Conduit Assembly

016230175
802025297022-1: RNCC: 3 | RNVC: 2

29 Oct 2013

5975-01-622-6387
Flexible Nonmetallic Conduit

016226387
ES7878-10: RNCC: 3 | RNVC: 2
ES7878-10: RNCC: 3 | RNVC: 9
ES7878-10: RNCC: 5 | RNVC: 2

16 Oct 2013

5975-01-622-3161
Electrical-Electronic Equipment Chassis

016223161
7606S-RSP720C-R: RNCC: 3 | RNVC: 2
7606S-SUP720B-R: RNCC: 5 | RNVC: 9

3 Oct 2013

5975-01-622-1644
Electrical-Electronic Equipment Panel

016221644
58R045-300003-6: RNCC: 3 | RNVC: 2

30 Sep 2013

5975-01-622-1328
Electrical Components Tie Down Strap

016221328
158-300068-00: RNCC: 3 | RNVC: 2

27 Sep 2013

5975-01-622-0606
Electrical Box Divider

016220606
8224-2: RNCC: 3 | RNVC: 2
8224-2: RNCC: 5 | RNVC: 2

26 Sep 2013

5975-01-621-6981
Electrical Nonmetallic Conduit Assembly

016216981
CRN1454E: RNCC: 3 | RNVC: 2

16 Sep 2013

NSN 5975-01-621-6360 016216360 PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT

5975-01-621-6360
Electrical-Electronic Equipment Panel

016216360
58R045-300003-5: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-6355
Electrical-Electronic Equipment Panel

016216355
58R045-300003-2: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-1803
Electrical Equipment Cabinet

016211803
STX2-315AS: RNCC: 3 | RNVC: 2

27 Aug 2013

5975-01-620-6585
Chassis Base

016206585
VN569AA: RNCC: 3 | RNVC: 2

5 Aug 2013

5975-01-620-0624
Junction Box Cover

016200624
11B254107: RNCC: 3 | RNVC: 2
11B254107: RNCC: 5 | RNVC: 2

28 Jun 2013

5975-01-619-6472
Electrical-Electronic Equipment Panel

016196472
60175-050-03: RNCC: 3 | RNVC: 2

11 Jun 2013

5975-01-619-6161
Electrical Tie Down Mounting Base

016196161
CB9788-CRM-P: RNCC: 3 | RNVC: 2

10 Jun 2013

5975-01-619-5602
Electrical Cable Protector

016195602
512463: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5305
Electrical Equipment Shelf

016195305
RMS 1924F: RNCC: 3 | RNVC: 2

5 Jun 2013

5975-01-619-4286
Electrical Conduit Bushing

016194286
KJZ00038: RNCC: 3 | RNVC: 2

30 May 2013

5975-01-619-3911
Electrical Conduit Ferrule Anchor Plate

016193911
7-611660003-001: RNCC: 3 | RNVC: 2

29 May 2013

5975-01-619-2707
Electrical Equipment Cabinet

016192707
172500: RNCC: 3 | RNVC: 1

23 May 2013

5975-01-619-2705
Electrical Equipment Cabinet

016192705
3400H001 GR1: RNCC: 3 | RNVC: 1

23 May 2013

5975-01-618-8420
Flexible Metal Conduit Assembly

016188420
1531118-103: RNCC: 3 | RNVC: 2

8 May 2013

5975-01-618-4474
Electrical Wall Plate

016184474
88377810219: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-617-7499
Electrical-Electronic Equipment Chassis

016177499
29219A-01: RNCC: 3 | RNVC: 9
29219A-01: RNCC: 5 | RNVC: 2
29219A-01: RNCC: C | RNVC: 1

2 Apr 2013

5975-01-617-5824
Chassis Base

016175824
AP-90-MNT: RNCC: 3 | RNVC: 2

27 Mar 2013

5975-01-617-4528
Electrical Equipment Rack

016174528
ARM044: RNCC: 3 | RNVC: 2

22 Mar 2013

5975-01-616-5216
Electrical Conduit End Seal Disk

016165216
1552751-103: RNCC: 3 | RNVC: 2

19 Feb 2013

5975-01-616-3079
Electrical-Electronic Equipment Chassis

016163079
AT-MCR1-30: RNCC: 3 | RNVC: 2
P40-900-508: RNCC: 5 | RNVC: 2

8 Feb 2013

5975-01-616-2479
Electrical-Electronic Equipment Panel

016162479
138-32100: RNCC: 3 | RNVC: 2

6 Feb 2013

5975-01-615-9466
Flexible Nonmetallic Conduit

016159466
0708144: RNCC: 3 | RNVC: 2

28 Jan 2013

5975-01-615-7982
Chassis Base

23 Jan 2013

5975-01-614-4529
Conduit Outlet

016144529
11B3512711: RNCC: 3 | RNVC: 2
11B3512711: RNCC: 3 | RNVC: 2

4 Dec 2012

5975-01-614-0956
Electrical-Electronic Equipment Chassis

016140956
ACS-3845RM-23: RNCC: 3 | RNVC: 2

27 Nov 2012

5975-01-613-8841
Rack E-16

016138841
204-56134-2: RNCC: 3 | RNVC: 2

20 Nov 2012

5975-01-613-8836
Conduit

016138836
204-53692-4: RNCC: 3 | RNVC: 2

20 Nov 2012

5975-01-613-8830
Junction Box

016138830
204-53276-6: RNCC: 3 | RNVC: 2

20 Nov 2012

5975-01-613-4389
Electrical Equipment Mounting Base

016134389
799001125009: RNCC: 2 | RNVC: 2

7 Nov 2012

5975-01-613-4050
Electrical Equipment Shelf

016134050
65-5785-15: RNCC: 3 | RNVC: 2

6 Nov 2012

5975-01-612-9476
Sectiona Terminal Junction Block

25 Oct 2012

5975-01-610-5791
Electrical-Electronic Equipment Chassis

016105791
69Y0893: RNCC: 3 | RNVC: 2

22 Aug 2012

5975-01-610-3318
Electrical-Electronic Equipment Panel

016103318
43019223-03: RNCC: 3 | RNVC: 2

15 Aug 2012

5975-01-610-1091
Electrical Wall Plate

016101091
43019049: RNCC: 3 | RNVC: 2

9 Aug 2012

5975-01-609-5488
Sp Chassis Assembly

016095488
204-18589-18: RNCC: 3 | RNVC: 2

27 Jul 2012

5975-01-609-5489
Spec Panel Assembly

016095489
204-18852-20: RNCC: 3 | RNVC: 2

27 Jul 2012

5975-01-609-1526
Electrical-Electronic Equipment Chassis

016091526
17-3-3030-2: RNCC: 3 | RNVC: 2

18 Jul 2012

5975-01-609-1314
Electrical-Electronic Equipment Chassis

016091314
17-3-3030-1: RNCC: 3 | RNVC: 2

17 Jul 2012

5975-01-608-4841
Interconnecting Box

016084841
17-3-3257-1: RNCC: 3 | RNVC: 2

28 Jun 2012

5975-01-608-4857
Junction Box

016084857
17-3-3258-1: RNCC: 3 | RNVC: 2

28 Jun 2012

5975-01-608-3388
Ground Rod

25 Jun 2012

5975-01-607-8020
Junction Box

14 Jun 2012

5975-01-607-8017
Junction Box

14 Jun 2012

5975-01-607-7867
Electrical Cable Protector

016077867
17-3-3550-1: RNCC: 3 | RNVC: 2
17-3-3550: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7851
Electrical Cable Protector

016077851
17-3-3551-1: RNCC: 3 | RNVC: 2
17-3-3551: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7841
Electrical Cable Protector

016077841
17-3-3554-1: RNCC: 3 | RNVC: 2
17-3-3554: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7832
Electrical Cable Protector

016077832
17-3-3555-1: RNCC: 3 | RNVC: 2
17-3-3555: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-7810
Electrical Cable Protector

016077810
17-3-3556-1: RNCC: 3 | RNVC: 2
17-3-3556: RNCC: D | RNVC: 9

14 Jun 2012

5975-01-607-4225
Panel

016074225
204-18852-37: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-607-4154
Conduit Installatio

016074154
1515750-101: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-605-8321
Electrical Grounding Plate

016058321
073-010566: RNCC: 3 | RNVC: 2

26 Apr 2012

5975-01-605-5678
Electrical-Electronic Equipment Chassis

016055678
152-002092-0001: RNCC: 1 | RNVC: 2
AS-0550885-11: RNCC: 3 | RNVC: 2

20 Apr 2012

5975-01-605-4549
Electrical-Electronic Equipment Chassis

016054549
A3179374-1: RNCC: 3 | RNVC: 2

19 Apr 2012

5975-01-605-2578
Electrical Equipment Rack

18 Apr 2012

5975-01-605-1880
Electrical-Electronic Equipment Chassis

016051880
79C0967-18: RNCC: 3 | RNVC: 2
CXPS-SL-00-1: RNCC: 5 | RNVC: 2
B1627: RNCC: 5 | RNVC: 2

16 Apr 2012

5975-01-604-7671
Electrical Equipment Rack

016047671
VIASAT 1123446: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-2217
Electrical Cable Nipple

016042217
55001620: RNCC: 3 | RNVC: 2
12048086: RNCC: 5 | RNVC: 9

30 Mar 2012

5975-01-602-5205
Rear Common

016025205
ART112-000-200-000: RNCC: 3 | RNVC: 2
350-1000-00: RNCC: 5 | RNVC: 9

31 Jan 2012

5975-01-602-5117
Electrical-Electronic Equipment Panel

016025117
526430: RNCC: 3 | RNVC: 2
4939835: RNCC: 5 | RNVC: 9

31 Jan 2012

5975-01-602-4559

31 Jan 2012

5975-01-601-5279
Blank Panel

016015279
352E2900-215: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-3011
Electrical Equipment Cabinet

016013011
WFM7F02: RNCC: 3 | RNVC: 2
071110603: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-01-600-9457
Electrical Equipment Rack

016009457
JW842434: RNCC: 3 | RNVC: 2

3 Jan 2012

5975-01-600-2257
Electrical-Electronic Equipment Panel

016002257
2100061-101: RNCC: 3 | RNVC: 2

17 Nov 2011

5975-01-600-0676
Chassis Base

016000676
X565A-R5: RNCC: 3 | RNVC: 2

7 Nov 2011

5975-01-599-5552
Electrical Equipment Rack Base

015995552
130-210: RNCC: 3 | RNVC: 2
H457522-1: RNCC: 5 | RNVC: 2

4 Oct 2011

5975-01-597-8670
Electrical-Electronic Equipment Panel

015978670
0N696846-1: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-597-8669
Electrical-Electronic Equipment Panel

015978669
0N696849-1: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-597-8599
Spec Conduit

015978599
1523669-123: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-597-6389
Bottom Channel Assy

17 Jun 2011

5975-01-597-1630
Electrical Equipment Rack

015971630
N5740A: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-596-7116
Electrical Equipment Shelf

015967116
3EM19148AD: RNCC: 3 | RNVC: 2
3EM19148ADAA: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-7026
Electrical Cable Protector

015967026
CL4S: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-5433
Cable Spacer

19 May 2011

5975-01-595-6237
Cable Marker Sleeve

015956237
3907AS2110-96: RNCC: 3 | RNVC: 2

3 May 2011

5975-01-595-0218
Junction Box

015950218
00514-0039-0001A: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0170
Electrical Equipment Rack

015950170
859-35027: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0174
Electrical Equipment Rack

015950174
103301-036: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0171
Electrical Equipment Rack

015950171
859-30019: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-593-6195
Electrical-Electronic Equipment Chassis

015936195
CMS-00183: RNCC: 3 | RNVC: 2
TPL-00135: RNCC: 3 | RNVC: 2

9 Apr 2013

5975-01-593-5740
Programmed Device

015935740
74434B61K1: RNCC: 3 | RNVC: 1

12 Apr 2011

5975-01-593-2564
Electrical Equipment Shelf

015932564
352E3307-102: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2563
Electrical Equipment Shelf

015932563
352E3307-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2560
Electrical Equipment Shelf

015932560
352E3303-102: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2562
Electrical Equipment Shelf

015932562
352E3305-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2561
Electrical Equipment Shelf

015932561
352E3304-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-593-2559
Electrical Equipment Shelf

015932559
352E3302-102: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-592-5508
Electrical-Electronic Equipment Chassis

015925508
4174890: RNCC: 3 | RNVC: 2

10 Mar 2011

5975-01-591-8918
Electrical Equipment Drawer

015918918
8102700-002: RNCC: 3 | RNVC: 2
8102700-02: RNCC: 5 | RNVC: 9

14 Feb 2011

5975-01-591-3333
Electrical Conductor Bushing

015913333
5690: RNCC: 3 | RNVC: 2

20 Jan 2011

5975-01-590-8180
Electrical-Electronic Equipment Panel

015908180
9861A125: RNCC: 3 | RNVC: 2

22 Dec 2010

5975-01-590-0514
Electrical-Electronic Equipment Chassis

015900514
333-414061-1: RNCC: 3 | RNVC: 2
333-414061-1: RNCC: 3 | RNVC: 2
8852HC1: RNCC: 5 | RNVC: 1

16 Nov 2010

5975-01-589-9716
Rigid Metal Conduit

10 Nov 2010

5975-01-588-8271
Stuffing Tube

015888271
1300-2751-B: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-7234
Cable Rack Extension

015887234
26755: RNCC: 3 | RNVC: 2

30 Sep 2010

5975-01-588-4407
Junction Box

015884407
9380-0372-001: RNCC: 3 | RNVC: 2

17 Sep 2010

5975-01-588-0561
Electronic Junction Rack

015880561
1453503-2: RNCC: 3 | RNVC: 2

31 Aug 2010

5975-01-588-0349
Electrical-Electronic Equipment Chassis

015880349
7604-SUP7203B-PS: RNCC: 3 | RNVC: 2

30 Aug 2010

5975-01-587-8843
Electronic Equipment Mounting Tray

015878843
358162-000: RNCC: 3 | RNVC: 2

24 Aug 2010

5975-01-587-5084
Stuffing Tube

015875084
41151-1: RNCC: 3 | RNVC: 2

9 Aug 2010

5975-01-587-2772
Electrical Equipment Mounting Base

015872772
200-89249-102: RNCC: 3 | RNVC: 2

30 Jul 2010

5975-01-587-1065
Guide Rail

23 Jul 2010

5975-01-586-8183
Electrical Cable Protector

015868183
115E2098G4: RNCC: 3 | RNVC: 2

15 Jul 2010

5975-01-586-8619
Electrical Grounding Plate

16 Jul 2010

5975-01-586-6808
Cable Marker Sleeve

015866808
1878805-5: RNCC: 3 | RNVC: 2
R-PV5: RNCC: 3 | RNVC: 2

9 Jul 2010

5975-01-586-4087
Electrical Conduit Tee

28 Jun 2010

5975-01-586-4085
Electrical Conduit Coupling

28 Jun 2010

5975-01-586-3486
Blank Panel

25 Jun 2010

5975-01-586-4088
Cable Hanger

28 Jun 2010

5975-01-586-4079
Electrical Box Connector

28 Jun 2010

5975-01-585-7538
Junction Box

015857538
4939815: RNCC: 3 | RNVC: 2

4 Jun 2010

5975-01-585-2005
Junction Box

015852005
H280111: RNCC: 3 | RNVC: 2

19 May 2010

5975-01-584-4086
Electrical Equipment Rack

26 Apr 2010

5975-01-582-0867
Electrical Equipment Cabinet Case

015820867
5599R: RNCC: 3 | RNVC: 2

8 Feb 2010

5975-01-581-2461
Chassis Base

015812461
355-7028-501: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-581-1604
Electrical Conduit Adapter

015811604
710HS002N1712C: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-581-0251
Electronic Equipment Mounting Tray

015810251
X2200: RNCC: 3 | RNVC: 2

4 Jan 2010

5975-01-580-5486
Electrical Equipment Rack

015805486
FAB-3USHELF0894: RNCC: 3 | RNVC: 2

17 Dec 2009

5975-01-580-1874
Electrical Equ Rack

015801874
RX1607-502: RNCC: 3 | RNVC: 2

7 Dec 2009

5975-01-580-0569
Electrical Equipment Rack

015800569
DELL POWEREDGE 42: RNCC: 3 | RNVC: 2

3 Dec 2009

5975-01-579-9282
Electrical-Electronic Equipment Chassis

015799282
218344-2-3-1: RNCC: 3 | RNVC: 2
FR-684: RNCC: 5 | RNVC: 2

28 Nov 2009

5975-01-579-2954
Vehicular Operation Panel

5 Nov 2009

5975-01-579-3386
Electrical Equipment Rack

015793386
Z22095-14U-27: RNCC: 3 | RNVC: 2
ZP22095-14U-27: RNCC: 5 | RNVC: 2
0210531 REV A FIND 4: RNCC: D | RNVC: 9

9 Nov 2009

5975-01-579-1828
Vehicular Operation Panel

3 Nov 2009

5975-01-578-3361
Electrical Equipment Mounting Base

015783361
234-0400-000: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-3369
Electrical Equipment Mounting Base

015783369
213-1201-010: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-3356
Electrical Equipment Mounting Base

015783356
221-0200-000: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-3348
Electrical Equipment Mounting Base

015783348
231-0300-000: RNCC: 3 | RNVC: 2

1 Oct 2009

5975-01-578-1482
Junction Box

015781482
3351953-7: RNCC: 3 | RNVC: 2
3351953-7: RNCC: 5 | RNVC: 2

29 Sep 2009

5975-01-577-3968
Electrical Equipment Shelf

3 Sep 2009

5975-01-576-9728
Junction Box Cover

20 Aug 2009

5975-01-576-6668
Electronic Equipment Mounting Tray

015766668
231-0335-050: RNCC: 3 | RNVC: 9

11 Aug 2009

5975-01-576-6669
Electrical Conduit Coupling Nut Clamp

015766669
FPL5312-10E: RNCC: 3 | RNVC: 9

11 Aug 2009

5975-01-576-4672
Electrical-Electronic Equipment Chassis

015764672
77425000-009: RNCC: 3 | RNVC: 2

3 Aug 2009

5975-01-576-3340
Electrical-Electronic Equipment Panel

015763340
91062783-001: RNCC: 3 | RNVC: 2

28 Jul 2009

5975-01-576-1459
Electrical Equipment Mounting Base

015761459
44V4391: RNCC: 3 | RNVC: 2

22 Jul 2009

5975-01-576-1463
Electrical Equipment Mounting Base

015761463
39J5304: RNCC: 3 | RNVC: 2
P39J5304: RNCC: 5 | RNVC: 9

22 Jul 2009

5975-01-576-1458
Electrical Equipment Mounting Base

015761458
40K6591: RNCC: 3 | RNVC: 2

22 Jul 2009

5975-01-575-8842
Electrical Equipment Drawer

015758842
39J4530: RNCC: 3 | RNVC: 2

16 Jul 2009

5975-01-575-5498
Stuffing Tube

015755498
500-5385: RNCC: 3 | RNVC: 2

7 Jul 2009

5975-01-575-5353
Electrical Conduit Wye

015755353
1523669-191: RNCC: 3 | RNVC: 2

6 Jul 2009

5975-01-575-5223
Electrical Equipment Rack

015755223
57K6022: RNCC: 3 | RNVC: 2

6 Jul 2009

5975-01-575-1364
Electrical Equipment Mounting Base

015751364
0701-R2: RNCC: 3 | RNVC: 9
PCCTS-0701: RNCC: 5 | RNVC: 2

22 Jun 2009

5975-01-574-9190
Insulator Bracket

15 Jun 2009

5975-01-574-7441
Junction Box

015747441
40512-01: RNCC: 3 | RNVC: 2

8 Jun 2009

5975-01-574-6095

3 Jun 2009

5975-01-574-5954
Electrical-Electronic Equipment Panel

015745954
6544526: RNCC: 3 | RNVC: 2

2 Jun 2009

5975-01-573-8594
Electrical Equ Rack

015738594
RX781-36: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8577
Electrical Equ Rack

015738577
RX1337-13: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8580
Electrical Equ Rack

015738580
RX1651-1: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8584
Electrical Equ Rack

015738584
RX2025-2: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-7606
Electrical-Electronic Equipment Chassis

015737606
C99A9414-5: RNCC: 3 | RNVC: 2

4 May 2009

5975-01-573-6232
Electronic Equipment Mounting Tray

015736232
827-10053-3: RNCC: 3 | RNVC: 2

29 Apr 2009

5975-01-573-6002
Electronic Equipment Mounting Tray

015736002
MT4-6319-101: RNCC: 3 | RNVC: 2

29 Apr 2009

5975-01-573-2891
Electrical Equipment Rack

015732891
GF030612: RNCC: 3 | RNVC: 2

15 Apr 2009

5975-01-573-2666
Thread Forming Tapping Stud

15 Apr 2009

5975-01-573-2500
Electronic Equipment Mounting Tray

14 Apr 2009

5975-01-572-7823
Cable Conduit Assy

015727823
7329084-03: RNCC: 3 | RNVC: 2
7329078-01 FIND 064: RNCC: 5 | RNVC: 2

25 Mar 2009

5975-01-572-8015
Electrical Equipment Mounting Base

015728015
92887A-00: RNCC: 3 | RNVC: 2

25 Mar 2009

5975-01-572-4597
Ground Rod

015724597
155070: RNCC: 3 | RNVC: 2

11 Mar 2009

5975-01-572-4301
Electrical Conductor Bushing

015724301
2240: RNCC: 3 | RNVC: 2

11 Mar 2009

5975-01-572-4004
Flexible Nonmetallic Conduit

015724004
221-1532-501: RNCC: 3 | RNVC: 2

10 Mar 2009

5975-01-572-2357
Electrical Wall Plate

015722357
87134022: RNCC: 3 | RNVC: 2

4 Mar 2009

5975-01-571-7912
Electrical-Electronic Equipment Panel

015717912
54642-42202: RNCC: 3 | RNVC: 2

18 Feb 2009

5975-01-571-6072
Ground Rod

015716072
GST0075395-01N: RNCC: 3 | RNVC: 2
75395: RNCC: D | RNVC: 9

10 Feb 2009

5975-01-570-9002
Swivel Assembly

015709002
VE207204ITEM2,ITEM4: RNCC: 3 | RNVC: 1
D-V-2657/VE207204ITEM2,ITEM8: RNCC: 5 | RNVC: 1

16 Jan 2009

5975-01-570-7621
Chassis Vme

015707621
TS107764: RNCC: 3 | RNVC: 2

13 Jan 2009

5975-01-570-6965
Housing Assembly Az

015706965
6724036000: RNCC: 3 | RNVC: 2

9 Jan 2009

5975-01-570-6191
Electrical-Electronic Equipment Chassis

7 Jan 2009

5975-01-569-7865
Junction Box

015697865
40555-01: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-6106
Junction Box

4 Dec 2008

5975-01-569-5387
Electrical Binding Post

3 Dec 2008

5975-01-569-3882
Junction Box

015693882
2056AS0315-1: RNCC: 3 | RNVC: 2

1 Dec 2008

5975-01-568-9684
Electrical Equipment Mounting Base

015689684
81151250: RNCC: 3 | RNVC: 2

15 Nov 2008

5975-01-568-4080
Cable Marker Sleeve

015684080
TMS-SCE-1/4-2.0-S1-0: RNCC: 3 | RNVC: 2

29 Oct 2008

5975-01-568-1981
Junction Box

015681981
A1210CHNF: RNCC: 3 | RNVC: 2
A2110CHNF: RNCC: 5 | RNVC: 9

22 Oct 2008

5975-01-567-9362
Electrical Nonmetallic Conduit Assembly

015679362
93006H9046: RNCC: 3 | RNVC: 2

14 Oct 2008

5975-01-567-8657
Cable Hanger

015678657
1716084ASSY7TY8,13.00LG: RNCC: 3 | RNVC: 1
302-8181042ITEM013: RNCC: 5 | RNVC: 1

9 Oct 2008

5975-01-567-8647
Cable Hanger

015678647
1716084ASSY7TY8,14.00LG: RNCC: 3 | RNVC: 1
302-8181042ITEM014: RNCC: 5 | RNVC: 1

9 Oct 2008

5975-01-567-8194
Junction Box Cover

8 Oct 2008

5975-01-567-2766
Electronic Equipment Mounting Tray

015672766
2805-0012-03-1: RNCC: 3 | RNVC: 2

22 Sep 2008

5975-01-567-0095
Junction Box

015670095
12516994: RNCC: 3 | RNVC: 2

16 Sep 2008

5975-01-566-8234
Interconnecting Box

015668234
2060AS218-01: RNCC: 3 | RNVC: 2
2060AS218-01: RNCC: 5 | RNVC: 2

11 Sep 2008

5975-01-566-4928
Electrical Conduit Adapter

3 Sep 2008

5975-01-565-5528
Electrical-Electronic Equipment Chassis

015655528
93006E3503: RNCC: 3 | RNVC: 2

30 Jul 2008

5975-01-565-5524
Electrical-Electronic Equipment Chassis

015655524
93006E3003: RNCC: 3 | RNVC: 2

30 Jul 2008

5975-01-565-5207
Stuffing Tube

015655207
NG-9516: RNCC: 3 | RNVC: 2

29 Jul 2008

5975-01-565-3784
Stuffing Tube

015653784
PCGA-11-B: RNCC: 3 | RNVC: 2

23 Jul 2008

5975-01-565-2260
Electrical Equipment Shelf

015652260
1758-7569: RNCC: 3 | RNVC: 2

16 Jul 2008

5975-01-565-0656
Electrical Equipment Mounting Base

015650656
43501G01: RNCC: 3 | RNVC: 2

10 Jul 2008

5975-01-564-7075
Blank Panel

015647075
200733: RNCC: 3 | RNVC: 2

25 Jun 2008

5975-01-564-6438
Rigid Nonmetallic Conduit

24 Jun 2008

5975-01-564-6080
End Packing

015646080
AA0148SS: RNCC: 3 | RNVC: 9
301-7006850ITEM124: RNCC: 5 | RNVC: 1

23 Jun 2008

5975-01-564-4113
Electrical-Electronic Equipment Chassis

015644113
5211603-03: RNCC: 3 | RNVC: 2

16 Jun 2008

5975-01-563-9654
Electrical Equipment Rack

015639654
5063-9236: RNCC: 3 | RNVC: 9

30 May 2008

5975-01-563-8422
Electrical Conduit Elbow

015638422
8214866: RNCC: 3 | RNVC: 2

23 May 2008

5975-01-563-7365
Flexible Nonmetallic Conduit

015637365
5651003203: RNCC: 3 | RNVC: 2
5651003203: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-563-7368
Flexible Nonmetallic Conduit

015637368
5651000503: RNCC: 3 | RNVC: 2
5651000503: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-563-7018
Junction Box

19 May 2008

5975-01-563-6715
Junction Box

015636715
8215107: RNCC: 3 | RNVC: 2

16 May 2008

5975-01-563-5112
Flexible Metal Conduit

015635112
2643132R1: RNCC: 3 | RNVC: 2

13 May 2008

5975-01-563-1901
Metallic Raceway Assembly

015631901
1677483C1: RNCC: 3 | RNVC: 2

5 May 2008

5975-01-563-0718
Air Black Tie Strap

015630718
SST-2S-0/TY25MX: RNCC: 3 | RNVC: 2
SST-2S-0/TY25MX: RNCC: 5 | RNVC: 9
SST-2S: RNCC: 5 | RNVC: 9
SST-2S: RNCC: C | RNVC: 1

1 May 2008

5975-01-562-8251
Junction Box Cover

015628251
2006384C92: RNCC: 3 | RNVC: 2

23 Apr 2008

5975-01-562-5918
Electrical Conduit Coupling Nut Clamp

015625918
PSSS1/4EG: RNCC: 3 | RNVC: 2

11 Apr 2008

5975-01-562-4397
Flexible Metal Conduit

015624397
FLEX LT 1-1/2 EFGRY: RNCC: 3 | RNVC: 2

8 Apr 2008

5975-01-562-4396
Flexible Metal Conduit

015624396
FLEX LT 1-1/4 EFGRY: RNCC: 3 | RNVC: 2

8 Apr 2008

5975-01-562-3506
Electrical Cable Protector

015623506
8215214: RNCC: 3 | RNVC: 2

5 Apr 2008

5975-01-562-1874
Ground Rod

015621874
8214938: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-01-562-1007
Junction Box Assembly

015621007
3212317: RNCC: 3 | RNVC: 2
3212317: RNCC: 5 | RNVC: 2

28 Mar 2008

5975-01-562-0541
Osc Servos Pcbavc

27 Mar 2008

5975-01-562-0504
Power Supply M215 Cpu 10

27 Mar 2008

5975-01-561-9078
Electrical-Electronic Equipment Chassis

015619078
904-3000001-01: RNCC: 3 | RNVC: 2

21 Mar 2008

5975-01-561-9070
Electrical Equipment Cabinet

015619070
A1053-000001: RNCC: 3 | RNVC: 2

21 Mar 2008

5975-01-561-6767
Electrical Equipment Rack

015616767
IPC-610-F: RNCC: 3 | RNVC: 2

13 Mar 2008

5975-01-561-2824
Junction Box

015612824
03237000: RNCC: 3 | RNVC: 2
23M7934: RNCC: 5 | RNVC: 1
54731: RNCC: 5 | RNVC: 2
364-8453: RNCC: 5 | RNVC: 2

28 Feb 2008

5975-01-561-2624
Msa Raid Disk Exp

015612624
ICP-MSA-EXP: RNCC: 3 | RNVC: 2
N115781: RNCC: 3 | RNVC: 2

28 Feb 2008

5975-01-561-1416
Vehicular Components Bracket

26 Feb 2008

5975-01-559-5730
Electronic Equipment Mounting Tray

015595730
2850-0101-03-1: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-559-3109
Electronic Equipment Mounting Tray

015593109
3671200E08006-5: RNCC: 3 | RNVC: 2

12 Dec 2007

5975-01-559-2181
Electronic Equipment Mounting Tray

015592181
8198216-G1: RNCC: 3 | RNVC: 2

10 Dec 2007

5975-01-559-1625
Electronic Equipment Mounting Tray

015591625
322-2420: RNCC: 3 | RNVC: 2

7 Dec 2007

5975-01-558-8206

26 Nov 2007

5975-01-558-1939
Electrical Conduit Ferrule

015581939
RP2100-EM16-T: RNCC: 3 | RNVC: 1
302-7006849ITEM52: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-557-7846
Drop Assembly

015577846
40601BF (C-4DM8): RNCC: 3 | RNVC: 2

29 Oct 2007

5975-01-557-6441
Electrical Cable Protector

015576441
R0071067-0113: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-6355
Electrical Equipment Rack

015576355
R0069359-0102: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-6325
Electrical-Electronic Equipment Panel

015576325
R0069125-0102: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-5781
Electrical Cable Protector

015575781
CS9124-2-3: RNCC: 3 | RNVC: 9

25 Oct 2007

5975-01-557-1890
Electrical Wall Plate

015571890
SM-B-887877-3: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-557-0962
Cable Hanger

015570962
3001624-2: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0711
Pipe To Tube Straight Adapter

015570711
1001978: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0597
Electrical Equipment Mounting Base

015570597
1002504: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-557-0650
Electronic Equipment Parts Kit

015570650
4003232: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-556-5665
Threadedplate

015565665
3112916C1L: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-5465
Electrical Nonmetallic Conduit Assembly

015565465
2644094R1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-5366
Flexible Nonmetallic Conduit

015565366
2508843C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4996
Flexible Metal Conduit Assembly

015564996
1822645C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4826
Interconnecting Box

015564826
MPN220: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4827
Conduit Outlet Cover

015564827
MPN221: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-4140
Metallic Raceway Assembly

015564140
4285064: RNCC: 3 | RNVC: 2
4285064: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-555-9870
Junction Box

015559870
1003330-1: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-555-9138
Electrical Equipment Rack

015559138
M-40010: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-8964
Electrical Switch Cover

015558964
SM-D-887872-2: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-555-4360
Metallic Raceway Assembly

015554360
1003599-1: RNCC: 3 | RNVC: 2
1003599-1-144: RNCC: 5 | RNVC: 9

5 Sep 2007

5975-01-554-7185
Electrical Grounding Plate

015547185
KP00399: RNCC: 3 | RNVC: 2

17 Aug 2007

5975-01-553-8559
Electrical-Electronic Equipment Panel

015538559
TGN6153A: RNCC: 3 | RNVC: 2

26 Jul 2007

5975-01-553-6861
Electrical-Electronic Equipment Chassis

015536861
SCXI-1000: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-553-4362
Electrical Equipment Mounting Base

015534362
882-1812-002: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-553-2104
Junction Box Assembly

015532104
UPB13200: RNCC: 3 | RNVC: 2

10 Jul 2007

5975-01-553-0799
Electrical-Electronic Equipment Panel

015530799
A3278863-001: RNCC: 3 | RNVC: 2

5 Jul 2007

5975-01-553-0373
Electrical Box Connector

015530373
RG31-R0062491/1: RNCC: 3 | RNVC: 2

3 Jul 2007

5975-01-552-8216
Junction Box

015528216
LSC151512: RNCC: 3 | RNVC: 1

26 Jun 2007

5975-01-552-7903
Ground Rod

015527903
J9155: RNCC: 3 | RNVC: 2

25 Jun 2007

5975-01-552-4932
Rigid Metal Conduit

015524932
75A230645-2003: RNCC: 3 | RNVC: 2

14 Jun 2007

5975-01-552-4716
Rackmount Kit

015524716
Y5735: RNCC: 3 | RNVC: 2

14 Jun 2007

5975-01-552-2918
Flexible Nonmetallic Conduit

015522918
4600-15: RNCC: 3 | RNVC: 2
3007792: RNCC: 5 | RNVC: 2

11 Jun 2007

5975-01-552-1172
Junction Box

015521172
BN4100804SS: RNCC: 3 | RNVC: 2

6 Jun 2007

5975-01-551-8104
Cable Hanger

015518104
TYUW10306A: RNCC: 3 | RNVC: 2
8H-A33334: RNCC: D | RNVC: 9

29 May 2007

5975-01-551-7377
Cable Hanger

015517377
TYUW10305A: RNCC: 3 | RNVC: 2
8H-A33357: RNCC: D | RNVC: 9

24 May 2007

5975-01-551-3920
Blank Panel

015513920
2100026-101: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-551-1616
Junction Box

015511616
JBPIO-BAE: RNCC: 3 | RNVC: 2

9 May 2007

5975-01-550-9086
Stuffing Tube

015509086
563-NG-9512: RNCC: 3 | RNVC: 2

3 May 2007

5975-01-550-9651
Cabinet Electrical

015509651
810-813D: RNCC: 3 | RNVC: 2
810-813D: RNCC: 3 | RNVC: 9

3 May 2007

5975-01-550-8527
Electrical Equipment Mounting Base

015508527
505712801-412: RNCC: 3 | RNVC: 2

1 May 2007

5975-01-550-8762
Electrical Box Sealing Flange

015508762
11C0327H01: RNCC: 3 | RNVC: 2

1 May 2007

Load More Results