What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 3 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 3 of 176

5975-01-515-4423
Electrical Components Tie Down Strap

015154423
420-61814-01: RNCC: 3 | RNVC: 2

25 Nov 2003

5975-01-702-7155
Conduit Outlet Cover

017027155
182505: RNCC: 3 | RNVC: 2

22 Jul 2022

5975-01-697-2714
Electrical Components Tie Down Strap

016972714
0775448: RNCC: 3 | RNVC: 9
2113N21: RNCC: 5 | RNVC: 2
3149-508: RNCC: 5 | RNVC: 9
3149-508: RNCC: 7 | RNVC: 2

10 Sep 2021

5975-00-408-1335
Electrical Components Tie Down Strap

004081335
TYF35M0: RNCC: 3 | RNVC: 2
TYF35N0: RNCC: 3 | RNVC: 2
990C768H01: RNCC: 7 | RNVC: 2

6 Jul 1970

5975-00-833-3244
Electrical Conduit Sealing Fitting

1 Jan 1962

5975-01-711-1766

017111766
RMC-3700: RNCC: 3 | RNVC: 2

5975-01-013-2742
Electrical Components Tie Down Strap

28 Nov 1975

5975-01-701-0858
Electrical Cable Assembly Protector

017010858
024.257.02: RNCC: 3 | RNVC: 2

26 Apr 2022

5975-01-714-5228

017145228
16D1706-41: RNCC: 3 | RNVC: 2
16D1706: RNCC: D | RNVC: 9

5975-01-714-5673

017145673
PLSR03: RNCC: 3 | RNVC: 9
5D900: RNCC: 5 | RNVC: 2

5975-01-714-1470

017141470
21027-4-M3D: RNCC: 3 | RNVC: 2
17-61350: RNCC: 7 | RNVC: 2

5975-01-713-7909

017137909
TA103003R09CR02: RNCC: 3 | RNVC: 2

5975-01-713-6653

017136653
EP-0031372: RNCC: 3 | RNVC: 2

5975-00-948-9907
Electrical Components Tie Down Strap

8 Apr 1966

5975-00-951-9882
Electrical Components Tie Down Strap

009519882
1850789: RNCC: 3 | RNVC: 2
3101-1027: RNCC: 5 | RNVC: 2
3101-1027: RNCC: 5 | RNVC: 9

6 May 1966

5975-00-994-1637
Electrical Components Tie Down Strap

009941637
LSC2E: RNCC: 3 | RNVC: 2
60A5A61-1: RNCC: 3 | RNVC: 2

30 Mar 1967

5975-00-985-1467
Electrical Components Tie Down Strap

009851467
4040947: RNCC: 3 | RNVC: 9

21 Oct 1966

5975-00-133-8695
Electrical Components Tie Down Strap

30 Aug 1968

5975-01-698-4800
Electrical-Electronic Equipment Chassis

016984800
PS400-CHAS-4-004-30: RNCC: 3 | RNVC: 2
02-2856344-4: RNCC: 5 | RNVC: 2

18 Nov 2021

5975-01-706-8553
Electronic Equipment Mounting Tray

017068553
34L9068: RNCC: 3 | RNVC: 2

23 Dec 2022

5975-01-707-9355
Electronic Equipment Mounting Tray

017079355
62-20399-01: RNCC: 3 | RNVC: 2

6 Mar 2023

5975-01-713-8328

017138328
8238122-1: RNCC: 3 | RNVC: 2
8238122: RNCC: D | RNVC: 9

5975-01-714-5492

017145492
13152-16: RNCC: 3 | RNVC: 2
13152-16: RNCC: 5 | RNVC: 2
23415 ITEM 19: RNCC: D | RNVC: 9

5975-01-714-1545

017141545
D1-55271D: RNCC: 3 | RNVC: 2

5975-01-714-2274

017142274
8844446: RNCC: 1 | RNVC: 2
8844446: RNCC: 3 | RNVC: 2

5975-01-713-6199

017136199
313041-1: RNCC: 3 | RNVC: 2

5975-01-705-4988
Electrical Components Tie Down Strap

017054988
WB18100HD: RNCC: 3 | RNVC: 2

22 Sep 2022

5975-01-531-3079
Electrical Components Tie Down Strap

015313079
SAE-AS23190/3: RNCC: 3 | RNVC: 1
AS23190/3-1: RNCC: 3 | RNVC: 2
AS23190/3-1: RNCC: 3 | RNVC: 9
12488863: RNCC: D | RNVC: 9

1 Jul 2005

5975-01-561-2436
Electrical Equipment Mounting Base

015612436
123AV92604-1: RNCC: 3 | RNVC: 2
123AV92604-1: RNCC: 3 | RNVC: 9

28 Feb 2008

5975-00-066-6841
Electrical Components Tie Down Strap

29 Jun 1967

5975-00-066-6839
Electrical Components Tie Down Strap

29 Jun 1967

5975-01-702-1771
Strain Electrical Conductor Clamp

017021771
BACC10HL3: RNCC: 3 | RNVC: 2

22 Jun 2022

5975-01-702-5560
Electrical-Electronic Equipment Chassis

017025560
30410-13: RNCC: 3 | RNVC: 2

14 Jul 2022

5975-00-178-1518
Stuffing Tube

001781518
M24235/9-155: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
5975PL1371107: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-178-1508
Stuffing Tube

001781508
M24235/9-010: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-010-1529: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-164-1239
Electrical Components Tie Down Strap

12 Oct 1983

5975-00-890-8465
Electrical Components Tie Down Strap

008908465
14993SFC: RNCC: 3 | RNVC: 9

10 Apr 1968

5975-00-903-1874
Electrical-Electronic Equipment Chassis

1 Jan 1960

5975-00-178-1504
Stuffing Tube

001781504
M24235/9-006: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-006-1525: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-178-1524
Stuffing Tube

001781524
M24235/9-161: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
27094-104: RNCC: 5 | RNVC: 1
5975PL1371157: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-01-697-7682
Electrical Equipment Mounting Base

016977682
7014037: RNCC: 3 | RNVC: 2

8 Oct 2021

5975-01-698-3060
Electrical-Electronic Equipment Chassis

016983060
512954-00: RNCC: 3 | RNVC: 2

9 Nov 2021

5975-01-700-5424
Electrical-Electronic Equipment Panel

017005424
90A513602-2001: RNCC: 3 | RNVC: 2

1 Apr 2022

5975-00-178-1513
Stuffing Tube

001781513
M24235/9-015: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-015-1534: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-238-5612
Electrical Components Tie Down Strap

2 Nov 1970

5975-00-460-4436
Interconnecting Box

14 Jan 1970

5975-01-711-2215

017112215
PDN-22-LG7242-2: RNCC: 3 | RNVC: 2

5975-01-711-1816

017111816
3366801-5: RNCC: 3 | RNVC: 2
3366801: RNCC: D | RNVC: 9

5975-01-711-1714

017111714
8425: RNCC: 3 | RNVC: 2

5975-00-938-1441
Electrical Components Tie Down Strap

009381441
1897262-1: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-855-7016
Electrical Components Tie Down Strap

29 Sep 1967

5975-01-434-4475
Electrical-Electronic Equipment Chassis

30 Jul 1996

5975-00-056-3847
Electrical Components Tie Down Strap

000563847
B22189P1: RNCC: 3 | RNVC: 9
22189P1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-698-4191
Electrical-Electronic Equipment Panel

016984191
185051-0001: RNCC: 3 | RNVC: 2

16 Nov 2021

5975-01-153-9208
Electrical-Electronic Equipment Chassis

011539208
126814-01: RNCC: 3 | RNVC: 2

18 May 1983

5975-01-698-5907
Electrical-Electronic Equipment Chassis

016985907
H1190G1: RNCC: 3 | RNVC: 2

29 Nov 2021

5975-01-700-9411
Electrical-Electronic Equipment Chassis

017009411
8200-PT: RNCC: 3 | RNVC: 2

21 Apr 2022

5975-01-698-4776
Electrical Components Tie Down Strap

016984776
MS3367-3-7: RNCC: 2 | RNVC: 2
AL-14-120-7: RNCC: 5 | RNVC: 2

18 Nov 2021

5975-01-698-2282
Electrical Components Tie Down Strap

016982282
111-02160: RNCC: 3 | RNVC: 2
111-02160: RNCC: 5 | RNVC: 2

4 Nov 2021

5975-01-701-5013
Electrical Equipment Mounting Base

017015013
WMBD: RNCC: 3 | RNVC: 9
91884614: RNCC: 5 | RNVC: 2

19 May 2022

5975-01-698-5500
Electronic Equipment Mounting Tray

016985500
MT6-4368-101: RNCC: 3 | RNVC: 2
MT6-4368-101: RNCC: 5 | RNVC: 2

23 Nov 2021

5975-01-699-3654
Electrical Tie Down Mounting Base

016993654
2587: RNCC: 3 | RNVC: 2

26 Jan 2022

5975-01-705-8249
Electrical Nonmetallic Conduit Assembly

017058249
D0090463-208: RNCC: 3 | RNVC: 2

14 Oct 2022

5975-00-001-8441
Electrical Components Tie Down Strap

4 Oct 1972

5975-01-714-5455

017145455
123AB92620-3: RNCC: 3 | RNVC: 2
123AB92620: RNCC: D | RNVC: 9

5975-01-706-2524
Electrical-Electronic Equipment Chassis

017062524
PS400-CHAS-5-007: RNCC: 3 | RNVC: 2

10 Nov 2022

5975-01-705-6728
Electrical-Electronic Equipment Panel

017056728
761308: RNCC: 3 | RNVC: 1

4 Oct 2022

5975-01-707-0637
Electrical Components Tie Down Strap

017070637
7082350: RNCC: 3 | RNVC: 2

12 Jan 2023

5975-01-699-6376
Electrical-Electronic Equipment Chassis

016996376
ACP-4000MB-40CE: RNCC: 3 | RNVC: 2

15 Feb 2022

5975-01-703-2684
Electrical-Electronic Equipment Chassis

017032684
8581904-10: RNCC: 3 | RNVC: 9

26 Aug 2022

5975-01-422-7721
Electrical Tie Down Mounting Base

014227721
CB4020G3N: RNCC: 3 | RNVC: 2

7 Dec 1995

5975-01-514-0293
Electrical Tie Down Mounting Base

015140293
403-4624-02: RNCC: 3 | RNVC: 2

14 Oct 2003

5975-01-518-2055
Electrical Tie Down Mounting Base

4 Mar 2004

5975-01-521-0605
Electronic Equipment Mounting Tray

8 Jun 2004

5975-01-169-3964
Electrical Components Tie Down Strap

7 Jan 1984

5975-01-177-7894
Electrical Components Tie Down Strap

011777894
2760465: RNCC: 3 | RNVC: 2
2760465: RNCC: 5 | RNVC: 9

27 Apr 1984

5975-01-323-0028
Electrical Components Tie Down Strap

013230028
4708353-013: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-323-9202
Electrical Components Tie Down Strap

013239202
4708353-011: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-393-5100
Electrical Components Tie Down Strap

013935100
GS10-201-0: RNCC: 3 | RNVC: 2

21 Jul 1994

5975-01-629-9008
Electrical Components Tie Down Strap

18 Jul 2014

5975-01-669-4490
Electrical Conduit Union

9 Jan 2018

5975-01-660-8760
Electrical-Electronic Equipment Chassis

016608760
09203006-02: RNCC: 3 | RNVC: 2
09203006: RNCC: D | RNVC: 9

8 Feb 2017

5975-01-679-9098
Crossarm Brace

15 Apr 2019

5975-01-714-5674

017145674
5D884: RNCC: 3 | RNVC: 2
PLSR01: RNCC: 3 | RNVC: 9
5D884: RNCC: 5 | RNVC: 9

5975-01-713-7907

017137907
65C18665-501: RNCC: 3 | RNVC: 2
65C18665: RNCC: D | RNVC: 9

5975-01-713-7880

017137880
15-2-15-849-0FL: RNCC: 3 | RNVC: 2
15-2-15-849-0FL: RNCC: 5 | RNVC: 9
78550-02801: RNCC: D | RNVC: 9

5975-01-713-4507

017134507
13055208: RNCC: 3 | RNVC: 2

5975-01-714-4204

017144204
15009-100: RNCC: 3 | RNVC: 2

5975-01-714-5676

017145676
PLSR02: RNCC: 3 | RNVC: 2
5D885: RNCC: 5 | RNVC: 2

5975-00-820-9145
Electrical Conduit Sealing Fitting

1 Jan 1962

5975-01-707-0039
Electrical Cable Nipple

017070039
405N2V02: RNCC: 3 | RNVC: 2
5975: RNCC: 3 | RNVC: 2
A25001: RNCC: 5 | RNVC: 2

9 Jan 2023

5975-00-082-4778
Electrical Components Tie Down Strap

20 Dec 1967

5975-00-949-6415
Electrical Components Tie Down Strap

009496415
SMD536730: RNCC: 3 | RNVC: 2
864064: RNCC: 5 | RNVC: 2

22 Apr 1966

5975-01-702-8032
Electrical Equipment Mounting Base

017028032
200-91133-101: RNCC: 3 | RNVC: 2
ECS-201574 REV N/C: RNCC: D | RNVC: 9

29 Jul 2022

5975-01-304-7479
Electrical Components Tie Down Strap

26 Jul 1989

5975-01-311-6839
Electrical Equipment Cabinet Case

013116839
F82000613: RNCC: 3 | RNVC: 2
F82000613: RNCC: 5 | RNVC: 9

2 Dec 1989

5975-00-421-5080
Electrical Tie Down Mounting Base

004215080
TA1S8-C: RNCC: 3 | RNVC: 1
12562811: RNCC: 3 | RNVC: 2
600075P4: RNCC: 3 | RNVC: 2
951755-2: RNCC: 5 | RNVC: 1
TA1S8: RNCC: 5 | RNVC: 1
TA1S8: RNCC: 5 | RNVC: 2
104406: RNCC: 5 | RNVC: 9
TA1S8: RNCC: 5 | RNVC: 9
25233-00660: RNCC: 5 | RNVC: 9
16-116F00M00R00: RNCC: 5 | RNVC: 9

9 Dec 1970

5975-00-284-6287
Junction Box Cover

002846287
A-A-59214-8D29: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
RS5: RNCC: 5 | RNVC: 1
RS5: RNCC: 5 | RNVC: 1
192T: RNCC: 5 | RNVC: 1
8367: RNCC: 5 | RNVC: 1
803: RNCC: 5 | RNVC: 1
456: RNCC: 5 | RNVC: 1
N8495: RNCC: 5 | RNVC: 9
A-A-59214/VIII-D-29: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-1698
Electrical Conduit Coupling Nut

002961698
AN3054-8: RNCC: 2 | RNVC: 2
7249166Z: RNCC: 5 | RNVC: 1
A-2208-8: RNCC: 5 | RNVC: 1
6-25768-8: RNCC: 5 | RNVC: 1
LS964-8: RNCC: 5 | RNVC: 2
118-22-8: RNCC: 5 | RNVC: 9
874098-2: RNCC: 5 | RNVC: 9
AN3054-8: RNCC: 5 | RNVC: 9
6026-4210-11: RNCC: 5 | RNVC: 9
871174-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-968-5048
Electrical Conductor Bushing

009685048
SB375-4: RNCC: 3 | RNVC: 2
P-6844: RNCC: 5 | RNVC: 1
54296: RNCC: 5 | RNVC: 2
A69-158: RNCC: 5 | RNVC: 2
890011: RNCC: 5 | RNVC: 2
077-003712-006: RNCC: 7 | RNVC: 2
SB375-4: RNCC: C | RNVC: 1
HG5298-1: RNCC: C | RNVC: 1
2502-102996: RNCC: C | RNVC: 1
739074-01: RNCC: C | RNVC: 1

1 Jan 1962

5975-01-323-0037
Electrical Components Tie Down Strap

013230037
4708353-008: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-323-0694
Electrical Components Tie Down Strap

013230694
4708353-020: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0033
Electrical Components Tie Down Strap

013230033
4708353-004: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-326-8594
Electrical Tie Down Mounting Base

013268594
MBNY-140-9: RNCC: 3 | RNVC: 2
5624349: RNCC: 7 | RNVC: 2

3 Oct 1990

5975-00-152-1098
Electrical Conduit Bushing

001521098
AA50553-3-1-Q-0-04-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
LBBU125: RNCC: 5 | RNVC: 1
10772429-9: RNCC: 5 | RNVC: 1
9018842: RNCC: 5 | RNVC: 1
1105: RNCC: 5 | RNVC: 1
BU120: RNCC: 5 | RNVC: 1
204: RNCC: 5 | RNVC: 1
125: RNCC: 5 | RNVC: 1
2-125: RNCC: 5 | RNVC: 1

1 Jan 1961

5975-01-331-5747
Electrical Components Tie Down Strap

21 Dec 1990

5975-01-342-7190
Electrical Components Tie Down Strap

013427190
2256625-2: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-00-627-1067
Electrical Components Tie Down Strap

9 Mar 1975

5975-01-705-5328
Electrical Nonmetallic Conduit Assembly

017055328
D0090463-204: RNCC: 3 | RNVC: 2

23 Sep 2022

5975-01-707-0628
Electrical Components Tie Down Strap

017070628
7082880: RNCC: 3 | RNVC: 2

12 Jan 2023

5975-01-705-5331
Electrical Nonmetallic Conduit Assembly

017055331
D0090463-206: RNCC: 3 | RNVC: 2

23 Sep 2022

5975-01-709-0644
Electrical Equipment Mounting Base

017090644
822-3752-001: RNCC: 3 | RNVC: 2

9 May 2023

5975-01-705-6733
Electrical Equipment Mounting Base

017056733
9575700100: RNCC: 3 | RNVC: 2

4 Oct 2022

5975-01-713-8539

017138539
21003A0205: RNCC: 3 | RNVC: 2

5975-01-714-5677

017145677
LLTC10: RNCC: 3 | RNVC: 2
70123693: RNCC: 5 | RNVC: 2

5975-01-714-5640

017145640
901-075-645-103: RNCC: 3 | RNVC: 2

5975-01-025-2463
Electrical Components Tie Down Strap

010252463
312920: RNCC: 3 | RNVC: 2
312920: RNCC: 3 | RNVC: 9

29 Jul 1976

5975-01-331-2229
Electrical Tie Down Mounting Base

14 Dec 1990

5975-00-448-4325
Electrical Components Tie Down Strap

4 Jan 1971

5975-01-702-4954
Electrical Equipment Mounting Base

017024954
4524004: RNCC: 3 | RNVC: 2
20-0248: RNCC: 5 | RNVC: 2
4524004-EDFP REV A: RNCC: D | RNVC: 9

11 Jul 2022

5975-01-703-2503
Electrical-Electronic Equipment Chassis

017032503
1001618-1: RNCC: 3 | RNVC: 9

25 Aug 2022

5975-01-714-5781

017145781
PK27GTACU: RNCC: 3 | RNVC: 2

5975-01-713-5607

017135607
HLTP3I-X12: RNCC: 3 | RNVC: 2

5975-01-713-8642

017138642
8624474-104: RNCC: 1 | RNVC: 2
13259908-01: RNCC: 3 | RNVC: 2
8624474: RNCC: D | RNVC: 9

5975-00-985-1497
Electrical Components Tie Down Strap

009851497
4040938-507: RNCC: 3 | RNVC: 9

21 Oct 1966

5975-00-985-1464
Electrical Components Tie Down Strap

009851464
4040949: RNCC: 3 | RNVC: 9

21 Oct 1966

5975-00-938-1429
Electrical Components Tie Down Strap

009381429
1897210: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-171-6218
Electrical Components Tie Down Strap

11 Feb 1984

5975-01-669-7063
Strain Electrical Conductor Clamp

18 Jan 2018

5975-01-684-6047
Cord Assembly Fastener

7 Nov 2019

5975-00-938-1458
Electrical Components Tie Down Strap

009381458
1896782: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-644-7749
Electrical-Electronic Equipment Chassis

016447749
534035-02: RNCC: 3 | RNVC: 2

19 May 2015

5975-01-496-5380
Electrical Components Tie Down Strap

014965380
346901-12: RNCC: 3 | RNVC: 2

18 Apr 2002

5975-01-499-1053
Electrical-Electronic Equipment Chassis

12 Jul 2002

5975-01-499-1050
Electrical-Electronic Equipment Chassis

12 Jul 2002

5975-01-500-5742
Electrical Components Tie Down Strap

015005742
249380: RNCC: 3 | RNVC: 2

2 Sep 2002

5975-01-713-5948

017135948
534185: RNCC: 3 | RNVC: 2

5975-01-713-5720

017135720
534184: RNCC: 3 | RNVC: 2

5975-01-508-3196
Electrical Components Tie Down Strap

015083196
PMI-MCTWS640: RNCC: 3 | RNVC: 9

17 May 2003

5975-01-714-5637

017145637
3686AS2112-1: RNCC: 3 | RNVC: 2
4189AS2010: RNCC: D | RNVC: 9

5975-01-714-5505

017145505
1011833: RNCC: 3 | RNVC: 2

5975-01-306-3476
Electrical-Electronic Equipment Chassis

2 May 1996

5975-01-531-3087
Electrical Components Tie Down Strap

015313087
SAE-AS23190/3: RNCC: 3 | RNVC: 1
AS23190/3-6: RNCC: 3 | RNVC: 2
AS23190/3-6: RNCC: 3 | RNVC: 9
12488863: RNCC: D | RNVC: 9

1 Jul 2005

5975-01-541-9216
Electrical Components Tie Down Strap

015419216
MS33670-2-0: RNCC: 2 | RNVC: 2

17 Jul 2006

5975-01-575-5228
Electrical Equipment Rack

6 Jul 2009

5975-01-713-3875

017133875
SR24UB: RNCC: 3 | RNVC: 2

5975-01-712-8775

017128775
N484-01U: RNCC: 3 | RNVC: 2

5975-01-713-8379

017138379
A156608-1: RNCC: 3 | RNVC: 2
LPLA156608-1: RNCC: C | RNVC: 1

5975-01-711-0973

017110973
12LTCN: RNCC: 3 | RNVC: 2

5975-01-714-2293

017142293
302-8778538 DETAIL 62-C: RNCC: 3 | RNVC: 2
302-8778538: RNCC: D | RNVC: 9

5975-01-574-8622
Electrical-Electronic Equipment Chassis

11 Jun 2009

5975-01-628-7455
Electrical Equipment Rack

9 Jun 2014

5975-01-593-2041
Electrical Components Tie Down Strap

015932041
AS33671-5-0: RNCC: 3 | RNVC: 2
AS33671: RNCC: 7 | RNVC: 1

5 Apr 2011

5975-01-365-6484
Electrical Tie Down Mounting Base

013656484
STBP19H: RNCC: 3 | RNVC: 2

9 Oct 1992

5975-01-605-0505
Electrical-Electronic Equipment Chassis

16 Apr 2012

5975-01-608-4100
Electronic Equipment Mounting Tray

26 Jun 2012

5975-01-534-3135
Electrical Components Tie Down Strap

015343135
T50R-NAT: RNCC: 3 | RNVC: 2

17 Oct 2005

5975-01-593-1232
Electrical-Electronic Equipment Chassis

4 Apr 2011

5975-01-602-2411
Electrical-Electronic Equipment Chassis

28 Jan 2012

5975-01-593-8438
Electrical Equipment Mounting Base

19 Apr 2011

5975-01-262-1618
Electrical Components Tie Down Strap

23 Aug 1987

5975-01-615-6778
Electrical-Electronic Equipment Chassis

18 Jan 2013

5975-01-502-0831
Electrical Components Tie Down Strap

015020831
ET5157: RNCC: 3 | RNVC: 2

24 Oct 2002

5975-00-604-4792
Electrical Components Tie Down Strap

006044792
LSC2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-703-1039
Electrical-Electronic Equipment Panel

017031039
TSW-770-GV-W-S: RNCC: 3 | RNVC: 2

17 Aug 2022

5975-01-702-5558
Electrical Equipment Cabinet Case

017025558
ECS 8307: RNCC: 3 | RNVC: 2

14 Jul 2022

5975-00-055-4385
Electrical Components Tie Down Strap

25 May 1967

5975-01-245-7055
Electrical-Electronic Equipment Chassis

3 Dec 1986

5975-01-703-5604
Electrical-Electronic Equipment Chassis

017035604
784781-01: RNCC: 3 | RNVC: 2
PXIE-1092: RNCC: 5 | RNVC: 2

8 Sep 2022

5975-00-402-7276
Electrical Components Tie Down Strap

15 Jan 1972

5975-01-070-5151
Electrical Components Tie Down Strap

11 Dec 1998

5975-00-548-8737
Electrical Cable Splice Protector

005488737
6ID 3/16TK X22L: RNCC: 3 | RNVC: 9
S-525324: RNCC: 5 | RNVC: 9
22X6-3/8 INCH: RNCC: 5 | RNVC: 9
22INX63-8IN: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-356-0354
Electrical Components Tie Down Strap

013560354
SST2HC: RNCC: 3 | RNVC: 2
781500000349: RNCC: 5 | RNVC: 2

28 Mar 1992

5975-00-549-9431
Electrical-Electronic Equipment Chassis

005499431
AC421: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-548-5883
Electrical Conduit Elbow

005485883
AN3063-4: RNCC: 2 | RNVC: 2
AN3063-4: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-01-072-9629
Electrical Components Tie Down Strap

010729629
10S300-2-120: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9626
Electrical Components Tie Down Strap

010729626
10S300-2-117: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-323-0032
Electrical Components Tie Down Strap

013230032
4708353-018: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-323-0031
Electrical Components Tie Down Strap

013230031
4708353-017: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-701-0745
Electrical Tie Down Mounting Base

017010745
FCM3.25-S6-L14: RNCC: 3 | RNVC: 2

26 Apr 2022

5975-01-701-0225
Electrical-Electronic Equipment Chassis

017010225
FXKIT0134: RNCC: 3 | RNVC: 2

22 Apr 2022

5975-01-699-5031
Electrical-Electronic Equipment Chassis

016995031
7014025: RNCC: 1 | RNVC: 2
7014025-01: RNCC: 3 | RNVC: 2

4 Feb 2022

5975-01-698-5290
Electrical-Electronic Equipment Chassis

016985290
PS400-CHAS-5-004-30: RNCC: 3 | RNVC: 2
02-2856344-6: RNCC: 5 | RNVC: 2

22 Nov 2021

5975-01-254-5708
Electrical Components Tie Down Strap

012545708
90-07033-00: RNCC: 3 | RNVC: 2

7 May 1987

5975-01-257-1836
Electrical Components Tie Down Strap

13 Jun 1987

5975-01-714-5682

017145682
PLSR04: RNCC: 3 | RNVC: 2
5D901: RNCC: 5 | RNVC: 2

5975-01-714-5952

017145952
SR-50: RNCC: 3 | RNVC: 2

5975-01-714-4240

017144240
EP-0031403: RNCC: 3 | RNVC: 2

5975-01-323-9201
Electrical Components Tie Down Strap

013239201
4708353-010: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-076-7852
Electrical Components Tie Down Strap

010767852
4-7-1: RNCC: 3 | RNVC: 2
2051803-0703: RNCC: 7 | RNVC: 2

11 May 1979

5975-01-072-9635
Electrical Components Tie Down Strap

010729635
10S300-2-136: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9638
Electrical Components Tie Down Strap

010729638
10S300-2-139: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-179-4401
Electrical Components Tie Down Strap

011794401
21662228-102: RNCC: 3 | RNVC: 2
SST-1M: RNCC: 3 | RNVC: 2
10134328: RNCC: 6 | RNVC: 9

18 May 1984

5975-01-385-5511
Electrical Tie Down Mounting Base

14 Jan 1994

5975-00-555-7355
Electrical Components Tie Down Strap

005557355
127-0377-004: RNCC: 3 | RNVC: 1

4 Nov 1974

5975-00-280-3384
Electrical Cable Splice Protector

1 Jan 1963

5975-00-285-6066
Electrical Components Tie Down Strap

5 Sep 1973

5975-00-614-2292
Electrical-Electronic Equipment Chassis

006142292
2591994-901: RNCC: 3 | RNVC: 2

8 Feb 1975

5975-01-254-5659
Electrical Components Tie Down Strap

012545659
A282A0076: RNCC: 3 | RNVC: 2

7 May 1987

5975-01-257-1057
Electrical Components Tie Down Strap

12 Jun 1987

5975-01-243-8400
Electrical-Electronic Equipment Chassis

1 Nov 1986

5975-01-323-9203
Electrical Components Tie Down Strap

013239203
4708353-012: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-336-7993
Electrical Components Tie Down Strap

013367993
RT675: RNCC: 3 | RNVC: 1
PLT2SC: RNCC: 3 | RNVC: 2
TY525M: RNCC: 5 | RNVC: 1
IR0179601 ITEM 9: RNCC: 5 | RNVC: 1
B755-1018: RNCC: 5 | RNVC: 1
100347-9000-145: RNCC: 5 | RNVC: 9
TY525M: RNCC: 5 | RNVC: 9
B755-1018: RNCC: 5 | RNVC: 9

3 Apr 1991

5975-01-462-9781
Electrical Components Tie Down Strap

014629781
SST1-5M-C10: RNCC: 3 | RNVC: 2

26 Feb 1999

NSN 5975-01-540-2181 015402181 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-540-2181
Electrical Components Tie Down Strap

11 May 2006

5975-01-562-7901
Electrical Components Tie Down Strap

015627901
1-1586: RNCC: 3 | RNVC: 2

22 Apr 2008

5975-01-598-5447
Electrical Components Tie Down Strap

015985447
63126: RNCC: 3 | RNVC: 2
55001362: RNCC: 7 | RNVC: 2

10 Aug 2011

5975-00-938-1440
Electrical Components Tie Down Strap

009381440
1897250: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-615-3062
Electrical-Electronic Equipment Chassis

016153062
FV29690G3: RNCC: 3 | RNVC: 2

8 Jan 2013

5975-01-491-0790
Electrical Components Tie Down Strap

12 Oct 2001

5975-01-577-2385
Electrical Equipment Mounting Base

31 Aug 2009

5975-01-577-3966
Electrical Equipment Shelf

3 Sep 2009

5975-00-938-1436
Electrical Components Tie Down Strap

009381436
1897220: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-938-1465
Electrical Components Tie Down Strap

009381465
1897214: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-938-1462
Electrical Components Tie Down Strap

009381462
1897186: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-611-5829
Electrical Components Tie Down Strap

016115829
560594: RNCC: 3 | RNVC: 2

19 Sep 2012

5975-01-323-0693
Electrical Components Tie Down Strap

013230693
4708353-019: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-087-2879
Electrical Components Tie Down Strap

14 Dec 1979

5975-01-177-7892
Electrical Components Tie Down Strap

011777892
556450: RNCC: 3 | RNVC: 2
556450: RNCC: 5 | RNVC: 9

27 Apr 1984

5975-01-064-6499
Electrical Components Tie Down Strap

29 Aug 1978

5975-00-999-1795
Electrical Components Tie Down Strap

009991795
515-4699-002: RNCC: 3 | RNVC: 2

10 Jan 1966

5975-01-092-5728
Electrical Components Tie Down Strap

28 Mar 1980

5975-01-133-4136
Electrical Components Tie Down Strap

13 Jun 1982

5975-01-375-9740
Electrical Components Tie Down Strap

013759740
107-1307-9: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-378-9758
Electrical Components Tie Down Strap

26 Aug 1993

5975-01-400-4193
Electrical Components Tie Down Strap

014004193
AS33681: RNCC: 3 | RNVC: 1
MS3368-5-9D: RNCC: 5 | RNVC: 9

15 Dec 1994

5975-00-132-0303
Electrical Components Tie Down Strap

001320303
C3N5: RNCC: 3 | RNVC: 9
3700-0800: RNCC: 5 | RNVC: 2

11 Dec 1968

5975-01-574-9766
Electrical Components Tie Down Strap

16 Jun 2009

5975-01-310-8844
Electrical Tie Down Mounting Base

013108844
C4NY-203-0D: RNCC: 3 | RNVC: 2

16 Nov 1989

5975-01-595-6223
Electrical Components Tie Down Strap

015956223
MS3367-19-0: RNCC: 3 | RNVC: 2
MS3367-19-0: RNCC: 3 | RNVC: 2
MS3367-19-0: RNCC: 5 | RNVC: 9
SAE-AS3367: RNCC: 7 | RNVC: 1

3 May 2011

5975-01-591-2592
Conduit Outlet

18 Jan 2011

5975-01-597-6462
Electrical Components Tie Down Strap

015976462
AS3367-8-0: RNCC: 3 | RNVC: 2

17 Jun 2011

5975-01-706-2266
Electrical-Electronic Equipment Panel

017062266
8-930001-02: RNCC: 3 | RNVC: 2

9 Nov 2022

5975-01-705-9355
Electrical-Electronic Equipment Panel

017059355
8-930002-01: RNCC: 3 | RNVC: 2

22 Oct 2022

5975-01-670-8097
Electrical Wall Plate

7 Mar 2018

5975-01-492-8356
Electrical Components Tie Down Strap

014928356
TY524MXR: RNCC: 3 | RNVC: 2

13 Dec 2001

5975-01-072-9643
Electrical Components Tie Down Strap

010729643
10S300-2-144: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-340-7356
Electrical Components Tie Down Strap

013407356
G470074-3: RNCC: 3 | RNVC: 2

19 Jun 1991

5975-01-518-4402
Electrical Components Tie Down Strap

11 Mar 2004

5975-01-136-4360
Electrical Components Tie Down Strap

8 Aug 1982

5975-01-526-3677
Electrical Components Tie Down Strap

015263677
MLT4EH15-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-356-8034
Electrical Components Tie Down Strap

013568034
101066: RNCC: 3 | RNVC: 9

10 Apr 1992

5975-01-423-5502
Electrical Components Tie Down Strap

31 Dec 1995

5975-01-525-0418
Electrical Components Tie Down Strap

015250418
R379231-01: RNCC: 3 | RNVC: 2

26 Oct 2004

5975-01-136-2169
Electrical Components Tie Down Strap

011362169
79940: RNCC: 3 | RNVC: 2

4 Aug 1982

5975-01-525-1970
Electrical Tie Down Mounting Base

015251970
7566K42: RNCC: 3 | RNVC: 2

1 Nov 2004

5975-01-539-0286
Electrical Components Tie Down Strap

015390286
869707C1: RNCC: 3 | RNVC: 2

7 Apr 2006

5975-00-938-1432
Electrical Components Tie Down Strap

009381432
1897216: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-362-6397
Electrical Components Tie Down Strap

013626397
656-0987-001: RNCC: 3 | RNVC: 2

12 Aug 1992

5975-01-299-6224
Electrical Components Tie Down Strap

012996224
689941: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-710-3525
Electrical-Electronic Equipment Chassis

017103525
CDAQ-9181: RNCC: 3 | RNVC: 2

30 May 2023

5975-01-270-0036
Electrical Components Tie Down Strap

012700036
1400-0402: RNCC: 3 | RNVC: 2
1400-0402: RNCC: 5 | RNVC: 9

24 Dec 1987

5975-01-465-9494
Electrical Tie Down Mounting Base

014659494
HS4271-2R6: RNCC: 3 | RNVC: 2
HS4271-2R6: RNCC: 5 | RNVC: 9

28 Jun 1999

5975-01-476-3974
Electronic Equipment Mounting Tray

11 Jul 2000

5975-01-132-9769
Electrical Components Tie Down Strap

011329769
PLM2MC: RNCC: 3 | RNVC: 2
PLM2MCP: RNCC: 5 | RNVC: 9

8 Jun 1982

5975-01-278-4575
Electrical Tie Down Mounting Base

012784575
KIMS-H430: RNCC: 3 | RNVC: 2
25233-00671: RNCC: 5 | RNVC: 2

5 May 1988

5975-01-072-9633
Electrical Components Tie Down Strap

010729633
10S300-2-124: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9627
Electrical Components Tie Down Strap

010729627
10S300-2-118: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9644
Electrical Components Tie Down Strap

010729644
10S300-2-145: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9625
Electrical Components Tie Down Strap

010729625
10S300-2-116: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-202-2937
Electrical Components Tie Down Strap

012022937
MS3368-5-3E: RNCC: 2 | RNVC: 2

28 Feb 1985

5975-01-228-7003
Electrical Tie Down Mounting Base

012287003
TC113: RNCC: 3 | RNVC: 2

20 Mar 1986

5975-01-230-3865
Electrical Tie Down Mounting Base

12 Apr 1986

5975-01-235-6897
Electrical Components Tie Down Strap

4 Jul 1986

5975-00-982-0157
Electrical Components Tie Down Strap

009820157
89104-3: RNCC: 3 | RNVC: 2

14 Oct 1966

5975-01-155-8412
Electrical Components Tie Down Strap

16 Jun 1983

5975-01-163-1188
Electrical Components Tie Down Strap

28 Sep 1983

5975-01-177-7893
Electrical Components Tie Down Strap

27 Apr 1984

5975-00-156-3253
Electrical Components Tie Down Strap

001563253
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-2-9: RNCC: 3 | RNVC: 2
MS3367-2-9: RNCC: 3 | RNVC: 9
MIS17332/2-7: RNCC: 5 | RNVC: 1
TF8: RNCC: 5 | RNVC: 1
TY-28M: RNCC: 5 | RNVC: 1
SAE AS33671: RNCC: 5 | RNVC: 1
242201505096: RNCC: 5 | RNVC: 1
SST4S-C: RNCC: 5 | RNVC: 1
08-477: RNCC: 5 | RNVC: 1

28 Jan 1970

5975-00-056-3984
Blank Panel

000563984
72B9993: RNCC: 3 | RNVC: 2
PA1101MG: RNCC: 3 | RNVC: 2
AM-1110-HG: RNCC: 3 | RNVC: 2
RI-013-012: RNCC: 5 | RNVC: 9
PBHG11: RNCC: 5 | RNVC: 9
PA1101HG: RNCC: 5 | RNVC: 9
19-12332-1/8: RNCC: 5 | RNVC: 9
9A-2125: RNCC: 5 | RNVC: 9
AP-G3984: RNCC: 5 | RNVC: 9
E1033-0119: RNCC: 5 | RNVC: 9

1 Jun 1967

5975-00-176-4344
Conduit Outlet

001764344
T-42: RNCC: 3 | RNVC: 2
T-42: RNCC: 3 | RNVC: 9
TC75: RNCC: 5 | RNVC: 1
16201: RNCC: 5 | RNVC: 9
RT-11: RNCC: 5 | RNVC: 9
BM12084-05ITEM005330: RNCC: 5 | RNVC: 9
AT2: RNCC: 5 | RNVC: 9
T2: RNCC: 5 | RNVC: 9
10-76: RNCC: 5 | RNVC: 9
TC-75: RNCC: 5 | RNVC: 9

17 Dec 1971

5975-01-455-3803
Electrical Tie Down Mounting Base

014553803
CB4020V3N12-750: RNCC: 3 | RNVC: 2
9D0271-103T: RNCC: 3 | RNVC: 2

30 Apr 1998

5975-01-472-8712
Electronic Equipment Mounting Tray

21 Mar 2000

5975-00-280-3105
Pole Step

002803105
MILH55053: RNCC: 4 | RNVC: 1
J1118: RNCC: 5 | RNVC: 1
PF37: RNCC: 5 | RNVC: 1
SCD106725-17: RNCC: 5 | RNVC: 1
ESB19424PT10: RNCC: 5 | RNVC: 1
MS39049-1: RNCC: 5 | RNVC: 9
S-515720: RNCC: 5 | RNVC: 9
506125: RNCC: 5 | RNVC: 9
DG1S2: RNCC: 5 | RNVC: 9
DG1S3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-178-1515
Stuffing Tube

001781515
M24235/9-122: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
M24235-9-122-1571: RNCC: 5 | RNVC: 9
5975PL1371082: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-257-1304
Electrical Box Connector

002571304
AA50553-2-2-L-1-02-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
2003: RNCC: 5 | RNVC: 1
0212356 FIND 17: RNCC: 5 | RNVC: 1
TW75-S: RNCC: 5 | RNVC: 1
91T075: RNCC: 5 | RNVC: 1
TC122: RNCC: 5 | RNVC: 1
5053: RNCC: 5 | RNVC: 1
W-F-408-2-2-L-1-02-M: RNCC: 5 | RNVC: 9
4075S: RNCC: 5 | RNVC: 9

26 Mar 1971

5975-00-223-7543
Electrical Components Tie Down Strap

002237543
MS3368-4-9D: RNCC: 2 | RNVC: 2
MS3368-4-9D: RNCC: 5 | RNVC: 1
AS33681-4-9D: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9
MS3368-4-9D: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9
10134314: RNCC: 6 | RNVC: 9

11 May 1973

5975-00-266-1984
Electrical Conduit Ferrule

002661984
AN3050-10: RNCC: 2 | RNVC: 2
874099-4: RNCC: 5 | RNVC: 1
212506: RNCC: 5 | RNVC: 1
258-2999: RNCC: 5 | RNVC: 1
R212506CHANGE3: RNCC: 5 | RNVC: 1
00066-0003: RNCC: 5 | RNVC: 1
63-00-3: RNCC: 5 | RNVC: 1
212506: RNCC: 5 | RNVC: 1
11-1-10: RNCC: 5 | RNVC: 1
2582999: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-244-7807
Electrical Box Connector

002447807
AA50553-1-2-M-1-01-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
TWL50L: RNCC: 5 | RNVC: 1
066351: RNCC: 5 | RNVC: 1
4230: RNCC: 5 | RNVC: 1
4230: RNCC: 5 | RNVC: 1
347C095H01: RNCC: 5 | RNVC: 1
2072: RNCC: 5 | RNVC: 1
W-F-408-1-2-M-1-01-S: RNCC: 5 | RNVC: 9
FED-STD-156: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-4093
Stuffing Tube

002964093
M19622/1-002: RNCC: 2 | RNVC: 2
MILS19622-1: RNCC: 4 | RNVC: 1
4010456-2: RNCC: 5 | RNVC: 1
5975PL0812180: RNCC: 6 | RNVC: 9
M19622/1-002: RNCC: 6 | RNVC: 9
PL1887874 IT. 8: RNCC: C | RNVC: 1
5210288-2: RNCC: C | RNVC: 1
617089-21: RNCC: C | RNVC: 1
204-4680421 PIE: RNCC: C | RNVC: 1
MS16156-2: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-280-3836
Electrical Wall Plate

002803836
AA59214-8F58: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
863: RNCC: 5 | RNVC: 1
100SR: RNCC: 5 | RNVC: 1
58C5: RNCC: 5 | RNVC: 1
863: RNCC: 5 | RNVC: 1
2539: RNCC: 5 | RNVC: 1
W-P-455: RNCC: 5 | RNVC: 9
SP58R5: RNCC: 5 | RNVC: 9
SP34R5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-282-2707
Electrical Components Tie Down Strap

002822707
T30LL9C2: RNCC: 3 | RNVC: 2
PLT3I: RNCC: 5 | RNVC: 2
PLT3I-C: RNCC: 5 | RNVC: 2
TY526M: RNCC: 5 | RNVC: 2
08471: RNCC: 5 | RNVC: 2
924024-3: RNCC: 5 | RNVC: 2
T30I: RNCC: 5 | RNVC: 9
T30LL0C2: RNCC: 5 | RNVC: 9
WIT-40VL-C: RNCC: 5 | RNVC: 9
TY526M: RNCC: 5 | RNVC: 9

22 Aug 1973

5975-00-274-3772
Electrical Components Tie Down Strap

002743772
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-8-9: RNCC: 3 | RNVC: 2
AS23190: RNCC: 5 | RNVC: 1
TC1115: RNCC: 5 | RNVC: 1
AS33671: RNCC: 5 | RNVC: 1
MTP3H-E6: RNCC: 5 | RNVC: 2
VG 95387 PART 102-8-9: RNCC: 5 | RNVC: 2
MTP3H-E6: RNCC: 5 | RNVC: 2
MIL-S-23190: RNCC: 5 | RNVC: 9
MS3367-8-9: RNCC: 5 | RNVC: 9

25 Jul 1973

5975-01-475-3442
Electrical Components Tie Down Strap

1 Jun 2000

5975-00-655-2775
Conduit Outlet

006552775
AA50563-101ALLLC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LL37WITH370F: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
A-A-50563-101XLLC: RNCC: 5 | RNVC: 9
LL397: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-556-0412
Electrical Box Connector

005560412
AA50552-00I-3-I-1: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1
5233: RNCC: 5 | RNVC: 1
5233: RNCC: 5 | RNVC: 1
325956: RNCC: 5 | RNVC: 1
ST75: RNCC: 5 | RNVC: 1
3403: RNCC: 5 | RNVC: 1
LT-102: RNCC: 5 | RNVC: 1
LT-202: RNCC: 5 | RNVC: 9
FED-STD-157: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-6984
Electrical Box Connector

002966984
CGB396: RNCC: 3 | RNVC: 2
WT3084-2: RNCC: 5 | RNVC: 1
458673: RNCC: 5 | RNVC: 1
964-8003: RNCC: 5 | RNVC: 1
2545: RNCC: 5 | RNVC: 1
2545: RNCC: 5 | RNVC: 1
7722330P012: RNCC: 5 | RNVC: 1
SR-1007: RNCC: 5 | RNVC: 1
SR-1007: RNCC: 5 | RNVC: 9
CGB396: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5975-00-553-6995 005536995 CABLE NIPPLE,ELECTRICAL

5975-00-553-6995
Electrical Cable Nipple

005536995
A-A-59178-1: RNCC: 2 | RNVC: 2
A-A-59178: RNCC: 4 | RNVC: 1
MS25171-1S-BLK: RNCC: 5 | RNVC: 1
MS25171-1S: RNCC: 5 | RNVC: 2
MS25171-1S: RNCC: 5 | RNVC: 2
MS25171-1S: RNCC: 5 | RNVC: 2
AA59178-1A: RNCC: 5 | RNVC: 2
N7718062571: RNCC: 5 | RNVC: 2
MBBN3411-1S: RNCC: 5 | RNVC: 2
MS25171-1S: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-486-1084
Electrical Tie Down Mounting Base

014861084
21-33006-3: RNCC: 3 | RNVC: 2
23TA00475: RNCC: D | RNVC: 9

19 Jun 2001

5975-00-548-9557
Conduit Chase Nipple

005489557
AN3064-20: RNCC: 2 | RNVC: 2
32660: RNCC: 5 | RNVC: 1
900-90-20: RNCC: 5 | RNVC: 1
AN3064-20: RNCC: 5 | RNVC: 1
7115: RNCC: 5 | RNVC: 1
GF803P20: RNCC: 5 | RNVC: 1
28-12-20: RNCC: 5 | RNVC: 1
1055-1: RNCC: 5 | RNVC: 9
77158: RNCC: C | RNVC: 1
213019-10: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-892-9256
Electrical Box Connector

008929256
STB9050: RNCC: 3 | RNVC: 2
33155: RNCC: 5 | RNVC: 1
LML-12: RNCC: 5 | RNVC: 1
3542: RNCC: 5 | RNVC: 1
13226E8396: RNCC: 5 | RNVC: 1
5352: RNCC: 5 | RNVC: 2
LQ5090-IC: RNCC: 5 | RNVC: 9
4Q950IT: RNCC: 5 | RNVC: 9
4Q-950-T: RNCC: 5 | RNVC: 9
LTB-5090: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-839-5322
Conduit Outlet

008395322
AA50553-101ATTAB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
T75MANDK75CM: RNCC: 5 | RNVC: 1
T75: RNCC: 5 | RNVC: 1
T27: RNCC: 5 | RNVC: 1
T27AND270F: RNCC: 5 | RNVC: 1
77C718693P002: RNCC: 5 | RNVC: 2
70-76: RNCC: 5 | RNVC: 9
T27: RNCC: 5 | RNVC: 9
T-75: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-903-2286
Electrical Components Tie Down Strap

009032286
T50MR-0: RNCC: 3 | RNVC: 2
08443: RNCC: 3 | RNVC: 2
TY535M0: RNCC: 5 | RNVC: 1
RTM 675UV: RNCC: 5 | RNVC: 1
TY35M0: RNCC: 5 | RNVC: 2
PLC2S-S10-C-0: RNCC: 5 | RNVC: 2
N-7-MB: RNCC: 5 | RNVC: 2
AP-07-50-MH-0-C: RNCC: 5 | RNVC: 2
AP-07-50-MH-0-C: RNCC: 5 | RNVC: 2
N-7MB-0: RNCC: 5 | RNVC: 9

15 Feb 1967

5975-01-034-5543
Electrical Cable Protector

010345543
M24705/1-BN6032: RNCC: 2 | RNVC: 2
M24705/1BN6032: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
60/32: RNCC: 5 | RNVC: 9
60/32: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-034-5528
Electrical Cable Protector

010345528
M24705/1-BN3015: RNCC: 2 | RNVC: 2
M24705/1BN3015: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
MIL-P-24705/1: RNCC: 5 | RNVC: 9
30/15: RNCC: 5 | RNVC: 9
30/15: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-00-838-7450
Electrical Components Tie Down Strap

008387450
PLC4HS25: RNCC: 3 | RNVC: 1
10035: RNCC: 3 | RNVC: 1
TY37M: RNCC: 3 | RNVC: 1
YJ-381: RNCC: 3 | RNVC: 2
CT120400MH14D: RNCC: 3 | RNVC: 2
TY37M: RNCC: 5 | RNVC: 1
AS40144: RNCC: 5 | RNVC: 1
TF7H: RNCC: 5 | RNVC: 2
PLC4H-S25: RNCC: 5 | RNVC: 2
PLC4H-S25: RNCC: 5 | RNVC: 2

12 Dec 1966

5975-00-839-5324
Conduit Outlet

008395324
AA50563-101ATTAC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
T37AND370F: RNCC: 5 | RNVC: 1
T353AND35050: RNCC: 5 | RNVC: 1
370F: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
033722-0001: RNCC: C | RNVC: 1
T353: RNCC: E | RNVC: 8
T100M: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-199-4846
Electrical Components Tie Down Strap

22 Jan 1985

5975-01-510-7824
Electrical-Electronic Equipment Chassis

25 Jul 2003

5975-00-949-6413
Electrical Components Tie Down Strap

009496413
SMD536713: RNCC: 3 | RNVC: 2
864059: RNCC: 5 | RNVC: 2

22 Apr 1966

5975-01-387-6291
Roxkit Stayplate

013876291
0000258436: RNCC: 3 | RNVC: 2
ASP0001200018: RNCC: 3 | RNVC: 2
STAY PLATE: RNCC: 5 | RNVC: 9
STAY PLATE: RNCC: 5 | RNVC: 9
10477070: RNCC: 6 | RNVC: 9

9 Mar 1994

5975-01-589-2440
Stuffing Tube

015892440
R70: RNCC: 3 | RNVC: 2
R 70: RNCC: 5 | RNVC: 2
R000000701021: RNCC: 5 | RNVC: 2
R000000701021: RNCC: 5 | RNVC: 2
592000210020: RNCC: 5 | RNVC: 2
R70 AISI 316: RNCC: 5 | RNVC: 2
5940900414: RNCC: 5 | RNVC: 2

22 Oct 2010

5975-01-699-8401
Stuffing Tube

016998401
NYST-1-002: RNCC: 3 | RNVC: 2

1 Mar 2022

5975-01-690-6804
Interconnecting Box

016906804
AN-2810-A: RNCC: 3 | RNVC: 2
NEMA-BX: RNCC: 5 | RNVC: 2
NEMA-BX: RNCC: 5 | RNVC: 9

26 Aug 2020

5975-01-007-7227
Electrical Components Tie Down Strap

9 Aug 1975

5975-01-221-7978
Electrical Components Tie Down Strap

012217978
5000093-00: RNCC: 3 | RNVC: 2
70906156-002: RNCC: 5 | RNVC: 9
5000091: RNCC: 5 | RNVC: 9

4 Dec 1985

5975-01-323-0698
Electrical Components Tie Down Strap

013230698
4708353-024: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0035
Electrical Components Tie Down Strap

013230035
4708353-006: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-386-4837
Electrical Components Tie Down Strap

013864837
AS33681: RNCC: 3 | RNVC: 1
MS3368-1-9E: RNCC: 3 | RNVC: 2
MS3368-1-9E: RNCC: 5 | RNVC: 9
MS3368: RNCC: 5 | RNVC: 9

5 Feb 1994

5975-01-088-9053
Electrical Components Tie Down Strap

010889053
SSC2SS10M30: RNCC: 3 | RNVC: 2

23 Jan 1980

5975-01-065-0505
Electrical Components Tie Down Strap

010650505
0266653-0007: RNCC: 3 | RNVC: 2
266653-0007: RNCC: 5 | RNVC: 9

8 Sep 1978

5975-01-393-2334
Electrical Tie Down Mounting Base

16 Jul 1994

5975-01-072-9631
Electrical Components Tie Down Strap

010729631
10S300-2-122: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-00-224-5312
Electrical Components Tie Down Strap

10 Sep 1972

5975-01-443-3661
Electrical Tie Down Mounting Base

014433661
9840044: RNCC: 3 | RNVC: 2

9 Apr 1997

5975-01-406-9972
Electrical Tie Down Mounting Base

014069972
FCPI3-20: RNCC: 3 | RNVC: 2
150-1013-040: RNCC: 7 | RNVC: 2

18 Jan 1995

5975-01-648-0787
Electrical-Electronic Equipment Chassis

016480787
4101192-501: RNCC: 3 | RNVC: 2

14 Sep 2015

5975-01-676-8781
Electrical Equipment Rack

16 Nov 2018

5975-01-486-9019
Electrical Components Tie Down Strap

014869019
6029001: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-686-9087
Electrical Components Tie Down Strap

10 Mar 2020

5975-01-391-8521
Electrical Components Tie Down Strap

013918521
PRWP1.5S-C0: RNCC: 3 | RNVC: 2

18 Jun 1994

5975-01-667-8623
Electrical-Electronic Equipment Chassis

2 Nov 2017

5975-01-127-0041
Electrical Components Tie Down Strap

21 Feb 1982

5975-01-493-0341
Electrical-Electronic Equipment Chassis

18 Dec 2001

5975-00-813-8716
Electrical Conductor Bushing

008138716
3036: RNCC: 3 | RNVC: 2
710015-006: RNCC: 5 | RNVC: 2
710015-006: RNCC: 5 | RNVC: 2
G105-334-001: RNCC: 5 | RNVC: 2
G105-334-001: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-480-4586
Electrical Components Tie Down Strap

014804586
PLT8H-LO: RNCC: 3 | RNVC: 2

21 Nov 2000

5975-01-526-6698
Electrical Equipment Rack

3 Jan 2005

5975-00-813-9805
Electrical-Electronic Equipment Chassis

008139805
6113-48: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-933-2481
Electrical Components Tie Down Strap

29 Jul 1966

5975-01-347-3631
Electrical Components Tie Down Strap

013473631
SSC25-S6-C: RNCC: 3 | RNVC: 2

19 Oct 1991

5975-01-357-3207
Electrical Components Tie Down Strap

013573207
PLT2I30: RNCC: 3 | RNVC: 2

21 Apr 1992

5975-01-365-4672
Electrical Components Tie Down Strap

013654672
81N1641: RNCC: 3 | RNVC: 2

7 Oct 1992

5975-01-372-3775
Electrical-Electronic Equipment Chassis

8 Mar 1993

5975-00-927-6512
Electrical Components Tie Down Strap

009276512
902496-1: RNCC: 3 | RNVC: 2

15 Aug 1966

5975-01-512-7323
Electrical Tie Down Mounting Base

015127323
ABM2S-A-D: RNCC: 3 | RNVC: 2

9 Sep 2003

5975-01-513-0889
Electrical Components Tie Down Strap

015130889
PLT8EH: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-00-933-3653
Electrical Components Tie Down Strap

10 Aug 1966

5975-01-526-7443
Electrical-Electronic Equipment Panel

5 Jan 2005

5975-00-938-1446
Electrical Components Tie Down Strap

009381446
1898045: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-529-2420
Electrical-Electronic Equipment Chassis

11 Apr 2005

5975-01-258-7917
Electrical Components Tie Down Strap

012587917
12563330: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-267-7801
Electrical Components Tie Down Strap

012677801
FS3009: RNCC: 3 | RNVC: 2
WRN-31/2: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-01-303-7377
Electrical Components Tie Down Strap

013037377
TY-50PX: RNCC: 3 | RNVC: 2

4 Jul 1989

5975-01-707-1734
Electrical-Electronic Equipment Panel

017071734
310113341: RNCC: 3 | RNVC: 2

20 Jan 2023

5975-01-702-9930
Electronic Equipment Mounting Tray

017029930
1721385A: RNCC: 3 | RNVC: 2
1721385 REV B: RNCC: D | RNVC: 9

10 Aug 2022

5975-01-706-0152
Electrical Equipment Mounting Base

017060152
AM003-8: RNCC: 3 | RNVC: 2

25 Oct 2022

5975-01-707-7906
Electrical-Electronic Equipment Chassis

017077906
P07818-B21: RNCC: 3 | RNVC: 2

22 Feb 2023

5975-01-707-1808
Electrical-Electronic Equipment Panel

017071808
310113158: RNCC: 3 | RNVC: 2

20 Jan 2023

5975-01-707-9239
Electric Component Rail Guide Stop

017079239
RK2PA: RNCC: 3 | RNVC: 2

4 Mar 2023

5975-01-706-9945
Electrical-Electronic Equipment Chassis

017069945
6300-7612-9500: RNCC: 3 | RNVC: 2

9 Jan 2023

5975-01-398-5960
Electrical Components Tie Down Strap

013985960
258B1097P0001: RNCC: 3 | RNVC: 9
258B1097P1: RNCC: 5 | RNVC: 9

5 Nov 1994

5975-01-697-9539
Electrical Conduit Coupling Nut Clamp

016979539
NMCCA2030-2: RNCC: 3 | RNVC: 2

20 Oct 2021

5975-01-699-9449
Shop Set Installation Electrical Kit

016999449
U8ACC-00001-0: RNCC: 3 | RNVC: 2

8 Mar 2022

5975-01-339-9796
Electrical Tie Down Mounting Base

013399796
VBC1055C: RNCC: 3 | RNVC: 2

5 Jun 1991

5975-01-345-1780
Electrical Components Tie Down Strap

013451780
2311: RNCC: 3 | RNVC: 2

13 Sep 1991

5975-01-033-8611
Electrical Conduit Sealing Fitting

13 Jan 1977

5975-00-669-9859
Flexible Metal Conduit Assembly

006699859
5334403-620: RNCC: 3 | RNVC: 2
5334403-620: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-232-2345
Electrical Components Tie Down Strap

012322345
K250903: RNCC: 3 | RNVC: 2

9 May 1986

5975-01-699-7834
Electronic Equipment Mounting Tray

016997834
284T0204-6: RNCC: 3 | RNVC: 1

25 Feb 2022

5975-01-257-1058
Electrical Components Tie Down Strap

12 Jun 1987

5975-00-178-1526
Stuffing Tube

001781526
M24235-9-133-1582: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
5975PL1371187: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-01-217-2711
Electrical Components Tie Down Strap

012172711
TY535MX: RNCC: 3 | RNVC: 2

23 Sep 1985

5975-01-115-2297
Electrical Components Tie Down Strap

011152297
TY525MX: RNCC: 3 | RNVC: 2
60009-020: RNCC: 5 | RNVC: 2
SW25594-7: RNCC: 5 | RNVC: 2
16004: RNCC: 5 | RNVC: 9

1 Jul 1981

5975-01-068-7375
Electrical Equipment Shelf

010687375
5061-0098: RNCC: 3 | RNVC: 2

1 Dec 1978

NSN 5975-00-899-4606 008994606 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-899-4606
Electrical Components Tie Down Strap

008994606
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-2-0: RNCC: 3 | RNVC: 2
MS3367-2-0: RNCC: 3 | RNVC: 9
P307206: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 1
SST4-0: RNCC: 5 | RNVC: 1
TY28M0: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 1
MS3367-2-0: RNCC: 5 | RNVC: 2

8 Feb 1967

5975-01-308-5114
Electrical Tie Down Mounting Base

013085114
FTH-4: RNCC: 3 | RNVC: 2
150115-001: RNCC: 7 | RNVC: 2

29 Sep 1989

5975-00-925-9316
Electrical Box Connector

009259316
8851: RNCC: 3 | RNVC: 2
NTC-350: RNCC: 5 | RNVC: 2
HC-409: RNCC: 5 | RNVC: 2
31-350: RNCC: 5 | RNVC: 9
1758: RNCC: 5 | RNVC: 9

11 Feb 1966

5975-00-938-1438
Electrical Components Tie Down Strap

009381438
1897230: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-851-8710
Electrical Components Tie Down Strap

008518710
802749-1: RNCC: 3 | RNVC: 2

18 Nov 1966

5975-01-304-6407
Electrical Components Tie Down Strap

013046407
2829-115-1: RNCC: 3 | RNVC: 2
1914824-5: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-371-8282
Electrical Components Tie Down Strap

013718282
11689: RNCC: 1 | RNVC: 2
PLT1M-M100: RNCC: 3 | RNVC: 2

24 Feb 1993

5975-01-365-5740
Electrical Components Tie Down Strap

013655740
6375207: RNCC: 3 | RNVC: 2
P2-096: RNCC: 5 | RNVC: 2

8 Oct 1992

5975-00-701-0989
Electrical Components Tie Down Strap

2 Feb 1968

5975-01-323-0029
Electrical Components Tie Down Strap

013230029
4708353-014: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-319-0011
Electrical Components Tie Down Strap

013190011
2412359-502: RNCC: 3 | RNVC: 2

29 Apr 1990

5975-01-323-0701
Electrical Components Tie Down Strap

013230701
4708353-002: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0699
Electrical Components Tie Down Strap

013230699
4708353-025: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0700
Electrical Components Tie Down Strap

013230700
4708353-001: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-323-0034
Electrical Components Tie Down Strap

013230034
4708353-005: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-295-9096
Electrical Tie Down Mounting Base

012959096
ABMMAC0: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-231-1647
Electrical Components Tie Down Strap

012311647
PLT1.5S: RNCC: 3 | RNVC: 2

23 Apr 1986

5975-01-362-1419
Electrical Components Tie Down Strap

013621419
G8203G17NF4-107: RNCC: 3 | RNVC: 2

1 Aug 1992

5975-01-526-7569
Electrical Equipment Cabinet

6 Jan 2005

5975-01-406-0660
Electrical Components Tie Down Strap

014060660
50167400: RNCC: 3 | RNVC: 2

20 Dec 1994

5975-01-062-6187
Electrical Tie Down Mounting Base

20 Jul 1978

5975-01-147-1903
Electrical Components Tie Down Strap

11 Feb 1983

5975-01-028-7853
Electrical Components Tie Down Strap

010287853
SST2SC30: RNCC: 3 | RNVC: 2

10 Oct 1976

5975-01-187-0003
Electrical Components Tie Down Strap

17 Aug 1984

5975-01-128-0390
Electrical Components Tie Down Strap

11 Mar 1982

5975-01-295-2655
Electrical-Electronic Equipment Panel

012952655
F82000423: RNCC: 3 | RNVC: 2
F82000423: RNCC: 5 | RNVC: 9

3 Mar 1989

5975-01-294-6499
Electrical Components Tie Down Strap

012946499
20-227: RNCC: 3 | RNVC: 2

19 Feb 1989

5975-01-714-4242

017144242
F1.5X3LG6: RNCC: 3 | RNVC: 2
2000-489: RNCC: 5 | RNVC: 2

5975-01-566-6489
Electrical Components Tie Down Strap

5 Sep 2008

5975-01-118-6988
Electrical Components Tie Down Strap

9 Sep 1981

5975-01-072-9639
Electrical Components Tie Down Strap

010729639
10S300-2-140: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-072-9630
Electrical Components Tie Down Strap

010729630
10S300-2-121: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-576-0814
Electrical Equipment Cabinet

21 Jul 2009

5975-01-609-7141
Electrical-Electronic Equipment Panel

1 Aug 2012

5975-01-578-7166
Electrical Cable Assembly Protector

16 Oct 2009

5975-01-577-9002
Electrical-Electronic Equipment Chassis

22 Sep 2009

5975-01-111-6945
Electrical Components Tie Down Strap

011116945
TY-503: RNCC: 3 | RNVC: 2

22 Apr 1981

5975-01-575-6834
Electrical Components Tie Down Strap

015756834
AS33671-6-9: RNCC: 3 | RNVC: 2

13 Jul 2009

5975-01-610-5108
Electrical Components Tie Down Strap

016105108
0719839: RNCC: 3 | RNVC: 2

20 Aug 2012

5975-01-323-0697
Electrical Components Tie Down Strap

013230697
4708353-023: RNCC: 3 | RNVC: 2

19 Jul 1990

5975-01-700-9441
Electrical Equipment Mounting Base

017009441
8254847-1: RNCC: 3 | RNVC: 2

21 Apr 2022

5975-01-698-3267
Electrical Equipment Mounting Base

016983267
822-1211-001: RNCC: 3 | RNVC: 1

10 Nov 2021

5975-01-701-3544
Electrical Components Tie Down Strap

017013544
7295K1: RNCC: 3 | RNVC: 2
9323: RNCC: 7 | RNVC: 2
9323-EDFP: RNCC: D | RNVC: 9

12 May 2022

5975-01-649-8986
Electrical Components Tie Down Strap

13 Nov 2015

5975-00-143-9527
Flexible Nonmetallic Conduit

001439527
SAE-AS81914/1: RNCC: 3 | RNVC: 1
CFT-06-0: RNCC: 3 | RNVC: 2
M81914/1-1001: RNCC: 3 | RNVC: 2
C10000-012: RNCC: 3 | RNVC: 2
AMS-T-81914: RNCC: 5 | RNVC: 1
CBT-12: RNCC: 5 | RNVC: 9
C2026-2-1: RNCC: 5 | RNVC: 9
M81914/1-1001: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
MIL-T-81914/1-2001: RNCC: 5 | RNVC: 9

26 Feb 1969

5975-01-359-6443
Electronic Junction Rack

013596443
AS81714/16: RNCC: 3 | RNVC: 1
M81714/16-13: RNCC: 3 | RNVC: 2
M81714/16-13: RNCC: 3 | RNVC: 9
TJT703015: RNCC: 5 | RNVC: 1
AS81714: RNCC: 5 | RNVC: 1
TJT803015: RNCC: 5 | RNVC: 2
M81714/16-13: RNCC: 5 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 9
MIL-T-81714: RNCC: 5 | RNVC: 9
10129644: RNCC: 6 | RNVC: 9

10 Jun 1992

5975-00-944-1499
Electrical Components Tie Down Strap

009441499
MS3368-1-9A: RNCC: 2 | RNVC: 2
TY46: RNCC: 5 | RNVC: 1
RTID-675: RNCC: 5 | RNVC: 1
SS7034-0246: RNCC: 5 | RNVC: 1
AS-33681: RNCC: 5 | RNVC: 1
MS3368-1-9A: RNCC: 5 | RNVC: 1
AS-23190: RNCC: 5 | RNVC: 1
MS3368-1-9A: RNCC: 5 | RNVC: 2
SSM2: RNCC: 5 | RNVC: 9
MS3368-1-5A: RNCC: 5 | RNVC: 9

7 Feb 1966

5975-00-151-7263
Electrical Box Connector

001517263
ST6: RNCC: 3 | RNVC: 9
9354233: RNCC: 5 | RNVC: 1
420-0158-002: RNCC: 5 | RNVC: 1
156-DC: RNCC: 5 | RNVC: 2
156-DC: RNCC: 5 | RNVC: 9
AC14: RNCC: E | RNVC: 8

15 Jan 1973

5975-00-919-7531
Electrical Components Tie Down Strap

1 Jan 1960

5975-01-531-2781
Electrical Tie Down Mounting Base

015312781
003900: RNCC: 3 | RNVC: 2

30 Jun 2005

5975-00-937-3461
Electrical Components Tie Down Strap

009373461
10125A114: RNCC: 3 | RNVC: 2

9 Dec 1966

5975-00-938-1434
Electrical Components Tie Down Strap

009381434
1897218: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-00-938-1470
Electrical Components Tie Down Strap

009381470
1897254: RNCC: 3 | RNVC: 2

10 Mar 1967

5975-01-699-4926
Electrical Equipment Cabinet Case

016994926
DMD-4553 STBD: RNCC: 3 | RNVC: 2
571-170096: RNCC: D | RNVC: 9

3 Feb 2022

5975-01-700-3075
Electrical-Electronic Equipment Panel

017003075
ALH-215768-001: RNCC: 3 | RNVC: 2
ALH-215768: RNCC: D | RNVC: 9

23 Mar 2022

5975-01-065-0506
Electrical Components Tie Down Strap

010650506
0266553-0008: RNCC: 3 | RNVC: 2
266653-0008: RNCC: 5 | RNVC: 9

8 Sep 1978

5975-00-248-8914
Electrical Equipment Drawer

002488914
7913394: RNCC: 3 | RNVC: 2

9 Jan 1972

5975-01-376-6481
Electrical Components Tie Down Strap

013766481
PLC2S-S10-M-10: RNCC: 3 | RNVC: 2
8734053: RNCC: 7 | RNVC: 2

6 Jun 1993

5975-00-125-4095
Modifications Kit

13 Nov 1968

5975-01-520-8324
Electrical Components Tie Down Strap

015208324
Z22-0036-001: RNCC: 3 | RNVC: 2

27 May 2004

5975-01-500-0560
Electrical Components Tie Down Strap

015000560
MS3367-1: RNCC: 3 | RNVC: 2
MS3367-1: RNCC: 5 | RNVC: 9

12 Aug 2002

5975-01-254-5707
Electrical Components Tie Down Strap

012545707
90-09617-00: RNCC: 3 | RNVC: 2

7 May 1987

5975-01-586-3971
Electrical Conduit Elbow

28 Jun 2010

5975-01-278-2206
Electrical Components Tie Down Strap

012782206
PLT3IC10: RNCC: 3 | RNVC: 2

3 May 1988

5975-01-583-4745
Electrical Conduit Adapter

25 Mar 2010

5975-01-343-4336
Electrical Components Tie Down Strap

13 Aug 1991

5975-01-628-7446
Electrical Equipment Cabinet

9 Jun 2014

5975-01-526-3679
Electrical Components Tie Down Strap

015263679
MLT6EH15-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-526-3667
Electrical Components Tie Down Strap

015263667
MLT4EH-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-642-9789
Electrical Equipment Mounting Base

16 Mar 2015

5975-01-526-9947
Electrical Components Tie Down Strap

015269947
NCMLT15DSH-L316: RNCC: 3 | RNVC: 2

13 Jan 2005

5975-01-296-0619
Electrical Components Tie Down Strap

16 Mar 1989

5975-01-313-0873
Electrical Components Tie Down Strap

013130873
22-119650: RNCC: 3 | RNVC: 2

31 Dec 1989

5975-01-702-3197
Electronic Equipment Mounting Tray

017023197
341B11220AB2481-104: RNCC: 3 | RNVC: 2

28 Jun 2022

5975-01-692-7227
Metallic Raceway Assembly

7 Jan 2021

5975-01-323-1362
Electrical Components Tie Down Strap

013231362
4708353-015: RNCC: 3 | RNVC: 2

21 Jul 1990

5975-01-251-4497
Electrical Components Tie Down Strap

012514497
PLTZM-30: RNCC: 3 | RNVC: 2

19 Mar 1987

5975-01-605-3449
Electrical Conduit Bushing

18 Apr 2012

5975-01-526-1594
Electrical Wall Plate

9 Dec 2004

5975-01-476-3978
Electronic Equipment Mounting Tray

11 Jul 2000

5975-01-692-3887
Electrical Grounding Plate

10 Dec 2020

5975-01-602-1447
Electrical-Electronic Equipment Chassis

27 Jan 2012

5975-01-597-5068
Electrical Components Tie Down Strap

10 Jun 2011

5975-01-553-6430
Electronic Equipment Mounting Tray

015536430
UTR1: RNCC: 3 | RNVC: 2

20 Jul 2007

5975-01-556-4569
Flexible Nonmetallic Conduit

3 Oct 2007

5975-01-581-3224
Electrical Components Tie Down Strap

015813224
KA4A1-2 CB9151: RNCC: 3 | RNVC: 2
KA4A1-2 CB915V5: RNCC: 5 | RNVC: 2
KA4A1-2CB9151V5: RNCC: 5 | RNVC: 2
KA4A1-2 CB9151: RNCC: 5 | RNVC: 9
CB9151: RNCC: D | RNVC: 9
KA KIT: RNCC: D | RNVC: 9

13 Jan 2010

5975-01-498-2167
Electrical Components Tie Down Strap

19 Jun 2002

5975-01-652-5578
Electrical Conduit Ferrule Anchor Plate

26 Feb 2016

5975-01-670-1629
Electrical Components Tie Down Strap

8 Feb 2018

5975-01-084-1832
Electrical Components Tie Down Strap

12 Oct 1979

5975-01-141-2364
Electrical Components Tie Down Strap

25 Oct 1982

5975-01-411-6589
Electrical Components Tie Down Strap

29 Mar 1995

5975-00-497-3865
Electrical Components Tie Down Strap

004973865
BT-10-01-NT: RNCC: 3 | RNVC: 2
EZ17-10: RNCC: 5 | RNVC: 9

2 Jul 1974

5975-01-561-1433
Electrical Components Tie Down Strap

26 Feb 2008

5975-01-156-9498
Blank Panel

011569498
3047795G1: RNCC: 3 | RNVC: 2

28 Jun 1983

5975-01-163-2043
End Plate

011632043
2D2-2E: RNCC: 3 | RNVC: 2
2D2-2E: RNCC: 3 | RNVC: 9
2D2-2E: RNCC: 5 | RNVC: 9
2D2-2E: RNCC: 5 | RNVC: 9

29 Sep 1983

5975-01-161-1033
Electrical-Electronic Equipment Chassis

011611033
3562040-10: RNCC: 3 | RNVC: 2

31 Aug 1983

5975-01-156-8141
Junction Box Assembly

011568141
13214E3498-2: RNCC: 3 | RNVC: 2

25 Jun 1983

5975-01-155-4842
Junction Box

011554842
81-90-95: RNCC: 3 | RNVC: 9

9 Jun 1983

5975-01-155-4854
Flexible Metal Conduit

011554854
3-8 ID FLEX: RNCC: 3 | RNVC: 9

9 Jun 1983

5975-01-300-7313
Electrical Components Tie Down Strap

013007313
29247: RNCC: 3 | RNVC: 2

18 May 1989

5975-01-280-9262
Electrical Components Tie Down Strap

012809262
PLT1MC10: RNCC: 3 | RNVC: 2

15 Jun 1988

5975-01-504-4929
Electrical-Electronic Equipment Panel

30 Jan 2003

5975-01-376-0205
Electrical Tie Down Mounting Base

013760205
208508: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-711-1135

017111135
840-34551-103: RNCC: 3 | RNVC: 2
840-34551: RNCC: D | RNVC: 9

5975-01-296-7075
Electrical Components Tie Down Strap

23 Mar 1989

5975-00-435-7054
Electrical Components Tie Down Strap

004357054
2250804: RNCC: 3 | RNVC: 2
2250804: RNCC: 5 | RNVC: 9

12 Feb 1972

5975-01-203-8698
Electrical Components Tie Down Strap

20 Mar 1985

5975-01-323-0036
Electrical Components Tie Down Strap

013230036
4708353-007: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-323-0030
Electrical Components Tie Down Strap

013230030
4708353-016: RNCC: 3 | RNVC: 2

18 Jul 1990

5975-01-343-1706
Electrical Components Tie Down Strap

013431706
006-0531-00: RNCC: 3 | RNVC: 2

6 Aug 1991

5975-01-245-7056
Electrical-Electronic Equipment Chassis

3 Dec 1986

5975-01-176-0364
Electrical Components Tie Down Strap

6 Apr 1984

5975-01-243-5108
Electrical Tie Down Mounting Base

28 Oct 1986

5975-01-199-7458
Electrical Components Tie Down Strap

011997458
9960027: RNCC: 3 | RNVC: 2

25 Jan 1985

5975-01-200-3535
Electrical Components Tie Down Strap

3 Feb 1985

5975-01-267-1775
Electrical Components Tie Down Strap

5 Nov 1987

5975-01-500-7250
Flexible Metal Conduit

9 Sep 2002

5975-01-177-0785
Electrical Components Tie Down Strap

011770785
524519: RNCC: 3 | RNVC: 2

19 Apr 1984

5975-01-679-9958
Interconnecting Box Cover

17 Apr 2019

5975-01-679-4250
Mounting Plate

25 Mar 2019

5975-01-513-6305
Electrical Components Tie Down Strap

015136305
5193HX: RNCC: 3 | RNVC: 2
TY525MX: RNCC: 5 | RNVC: 2

1 Oct 2003

5975-01-526-3682
Electrical Components Tie Down Strap

015263682
MLT6EH-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-499-1048
Electrical-Electronic Equipment Chassis

12 Jul 2002

5975-01-528-0056
Electrical Components Tie Down Strap

015280056
PLT2.5SM30: RNCC: 3 | RNVC: 2

28 Feb 2005

5975-01-585-4535
Electrical Components Tie Down Strap

015854535
69455K42: RNCC: 3 | RNVC: 2

26 May 2010

5975-01-595-5670
Rigid Metal Conduit

2 May 2011

5975-01-617-1098
Electrical Components Tie Down Strap

016171098
18102-X: RNCC: 3 | RNVC: 2
3006056: RNCC: 5 | RNVC: 2
S000193: RNCC: D | RNVC: 9

12 Mar 2013

5975-01-631-6032
Electrical-Electronic Equipment Chassis

016316032
114E7851G3: RNCC: 3 | RNVC: 2

18 Sep 2014

5975-01-657-9949
Electrical Equipment Mounting Base

016579949
RMK-1901: RNCC: 3 | RNVC: 2

8 Sep 2016

5975-01-252-3823
Electrical Components Tie Down Strap

012523823
1400-0308: RNCC: 3 | RNVC: 2
PL12S-M14: RNCC: 5 | RNVC: 2
1400-0308: RNCC: 5 | RNVC: 9

1 Apr 1987

5975-01-256-0927
Electrical Components Tie Down Strap

012560927
PLT4H-L30: RNCC: 3 | RNVC: 2
PLT-4H-D-30: RNCC: 5 | RNVC: 9

31 May 1987

5975-01-211-4632
Electrical Components Tie Down Strap

26 Jun 1985

5975-01-257-1059
Electrical Components Tie Down Strap

12 Jun 1987

5975-01-309-4755
Electrical Components Tie Down Strap

013094755
063550-0001: RNCC: 3 | RNVC: 2

19 Oct 1989

5975-01-323-0038
Electrical Components Tie Down Strap

013230038
4708353-009: RNCC: 3 | RNVC: 2

18 Jul 1990

Load More Results