What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 175 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 175 of 176

5975-00-685-9518
Cable Strain Relief Bushing

006859518
SR7PS18-2: RNCC: 3 | RNVC: 2
5975006859518: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-565-1053
Moisture Dust Boot

005651053
8011413: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-483-4824
Electrical-Electronic Equipment Chassis

004834824
0N056415: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-00-738-0211
Rigid Metal Conduit Assembly

007380211
NAF1150-4A188: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-189-4695
Cable Marker Sleeve

001894695
0N057432-20: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4694
Cable Marker Sleeve

001894694
0N057432-19: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4721
Cable Marker Sleeve

001894721
0N057432-47: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-9949
Electrical Cable Nipple

001899949
50133-1076: RNCC: 3 | RNVC: 2
50133-1076: RNCC: 5 | RNVC: 9

16 Mar 1973

5975-00-190-4421
Flexible Metal Conduit

001904421
177-0750: RNCC: 3 | RNVC: 2
BA10089-2: RNCC: 5 | RNVC: 2
177-0750: RNCC: 5 | RNVC: 2
117-0750: RNCC: 5 | RNVC: 2
BA10089-2: RNCC: 5 | RNVC: 9
BA10089-2: RNCC: 5 | RNVC: 9
B10089-2: RNCC: 5 | RNVC: 9
BA10089-2: RNCC: 5 | RNVC: 9
117-0750: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-0992
Electrical-Electronic Equipment Chassis

006810992
AC426: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-728-3224
Electrical-Electronic Equipment Chassis

007283224
516-2442-001: RNCC: 3 | RNVC: 2
SMB504469: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-681-4069
Electrical Conduit Adapter

006814069
RE61: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-061-0126
Electrical-Electronic Equipment Chassis

010610126
621-0612-001: RNCC: 3 | RNVC: 2

10 Jun 1978

5975-00-646-8882
Electrical Equipment Rack

006468882
464602-150: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-994-4684
Electrical Conductor Bushing

009944684
1560-3: RNCC: 3 | RNVC: 2
4M80-4: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-701-6336
Junction Box

007016336
SM-C-148427: RNCC: 3 | RNVC: 2
52298: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-501-0452
Flexible Metal Conduit

005010452
154-2464: RNCC: 3 | RNVC: 2
S154-2464: RNCC: 3 | RNVC: 2
C24-4: RNCC: 3 | RNVC: 2
7888: RNCC: 3 | RNVC: 2
C38-4: RNCC: 3 | RNVC: 2
7888: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-501-2628
Electrical Equipment Mounting Base

005012628
522-1658-004: RNCC: 3 | RNVC: 2

2 Jul 1974

5975-00-990-4081
Electrical Box Connector

009904081
112: RNCC: 3 | RNVC: 2
GC837AD1: RNCC: 7 | RNVC: 2

1 Jan 1962

5975-00-151-4097
Electrical-Electronic Equipment Chassis

001514097
11731127: RNCC: 3 | RNVC: 2

11 Sep 1970

5975-00-522-7045
Bushing

005227045
343A288: RNCC: 3 | RNVC: 9
343A288: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-448-3152
Engine Conduit Assembly

004483152
5116427-2: RNCC: 3 | RNVC: 2
5116427-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-448-3179
Flexible Metal Conduit Assembly

004483179
5143436-9: RNCC: 3 | RNVC: 2
C175-0375-0900-5757: RNCC: 3 | RNVC: 2
C175-0375-0900-5757: RNCC: 5 | RNVC: 9
5143436-9: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-016-0454
Base Plate Assembly

010160454
1841198: RNCC: 3 | RNVC: 2

2 Feb 1976

5975-01-050-8114
Self Locki Retainer

010508114
SLR1-BB: RNCC: 3 | RNVC: 2
SLR1-BB: RNCC: 5 | RNVC: 2

15 Nov 1977

5975-00-503-0318
Flexible Metal Conduit

005030318
1150-24: RNCC: 3 | RNVC: 2
1-1500: RNCC: 5 | RNVC: 2
1-1500: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-503-0797
Electrical Equipment Cabinet

005030797
1X1388: RNCC: 3 | RNVC: 2
CY1345GR: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-636-0741
Electrical Nonmetallic Conduit Assembly

006360741
8412461: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-038-8124
Junction Box Assembly

010388124
55008: RNCC: 3 | RNVC: 2
933F055008TR: RNCC: 5 | RNVC: 2
TIN-374: RNCC: 5 | RNVC: 9
933F055008: RNCC: 5 | RNVC: 9

13 Apr 1977

5975-00-497-7899
Junction Box

004977899
0N047134: RNCC: 3 | RNVC: 2

2 Jul 1971

5975-01-027-1642
Electrical Equipment Rack

010271642
TM506: RNCC: 3 | RNVC: 2
401-4970: RNCC: 6 | RNVC: 9

9 Sep 1976

5975-01-100-1063
Top Panel Assembly

011001063
456391-02BLACK: RNCC: 3 | RNVC: 2
456391-02BLACK: RNCC: 3 | RNVC: 9

28 Aug 1980

5975-00-608-4391
Cover

006084391
4561542: RNCC: 3 | RNVC: 2

25 Jan 1975

5975-01-040-9933
Electrical Equipment Mounting Base

010409933
2087016-1202: RNCC: 3 | RNVC: 2
MTA-12A1: RNCC: 5 | RNVC: 2

19 May 1977

5975-00-483-4675
Electrical-Electronic Equipment Chassis

004834675
0N047078: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-00-642-8131
Electrical Equipment Cabinet

006428131
CY1271ULR: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-130-2574
Electrical Equipment Mounting Base

011302574
74A880669-1001: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-00-498-8074
Eye Thimble

004988074
ESD33625-25: RNCC: 3 | RNVC: 2
500: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-119-9179
Cover

001199179
0N050121-1: RNCC: 3 | RNVC: 2

18 Oct 1968

5975-00-122-2429
Flexible Metal Conduit Assembly

001222429
5114173-5: RNCC: 3 | RNVC: 2
5114173-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-007-7075
Electrical Conduit Coupling Nut

010077075
3150230-668-17: RNCC: 3 | RNVC: 2

9 Aug 1975

5975-00-256-3555
Flexible Metal Conduit Assembly

002563555
50038-1009: RNCC: 3 | RNVC: 1
3002-1009: RNCC: 3 | RNVC: 2
S2206-1009: RNCC: 3 | RNVC: 2
92392: RNCC: 5 | RNVC: 2
50038-1009: RNCC: 5 | RNVC: 9
E1199-484-1009: RNCC: 5 | RNVC: 9
92392: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-623-0682
Conduit Outlet Cover

006230682
8417431: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-008-9956
Electrical-Electronic Equipment Chassis

010089956
G355062: RNCC: 3 | RNVC: 2
G355062: RNCC: 5 | RNVC: 9

1 Sep 1975

5975-01-010-4887
Electrical Conduit Ferrule

010104887
11-2B3: RNCC: 3 | RNVC: 2

30 Sep 1975

5975-01-013-5160
Electrical Equipment Rack

010135160
TM504: RNCC: 3 | RNVC: 2
401-9404: RNCC: 6 | RNVC: 9

5 Dec 1975

5975-00-570-4131
Non-Electrical Conduit

005704131
A5023-1200: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-562-4914
Electrical Equipment Mounting Base

005624914
41484-20600: RNCC: 3 | RNVC: 2

15 Jan 1968

5975-00-563-4566
Flexible Metal Conduit

005634566
G125: RNCC: 3 | RNVC: 2

22 Oct 1969

5975-01-031-7509
Rigid Metal Conduit

010317509
2505382: RNCC: 3 | RNVC: 2

2 Dec 1976

5975-00-481-0511
Power Junction Box

004810511
DR22A1: RNCC: 3 | RNVC: 2
DR10: RNCC: 3 | RNVC: 2
DR23A2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-617-3153
Electrical Conduit Coupling Nut

006173153
6173153: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-989-2010
Electrical Box Connector

009892010
SP5312: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-049-8307
Electrical Equipment Mounting Base

000498307
MT327GR: RNCC: 2 | RNVC: 2
MT327GR: RNCC: 5 | RNVC: 1
SCDL68854: RNCC: 5 | RNVC: 1
SC-D-68856: RNCC: 5 | RNVC: 1

1 Jan 1961

5975-01-025-3602
Electrical-Electronic Equipment Panel

010253602
65B0454: RNCC: 3 | RNVC: 2

30 Jul 1976

5975-00-774-4153
Electrical Conduit Adapter

007744153
7744153: RNCC: 3 | RNVC: 2
10-37408: RNCC: 3 | RNVC: 9
78200: RNCC: 5 | RNVC: 2
10-37408: RNCC: 5 | RNVC: 9
10-37408: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-020-7131
Electrical Components Tie Down Strap

010207131
004840: RNCC: 1 | RNVC: 2
H463-1-320-7: RNCC: 3 | RNVC: 2

3 May 1976

5975-00-152-1142
Electrical Box Connector

001521142
806: RNCC: 3 | RNVC: 9
W-F-406: RNCC: 4 | RNVC: 1
7485: RNCC: 5 | RNVC: 9
SC5: RNCC: 5 | RNVC: 9
L-1104: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-978-2527
Electrical Equipment Mounting Base

009782527
2065149-0504: RNCC: 3 | RNVC: 2
MT3748APS113: RNCC: 5 | RNVC: 2
2065149-0502: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-01-122-9278
Electrical Components Tie Down Strap

011229278
10S300-2-75: RNCC: 3 | RNVC: 9
10S300-2-75: RNCC: C | RNVC: 1

2 Dec 1981

5975-00-404-1079
Cable Strain Relief Bushing

004041079
SR5P4: RNCC: 3 | RNVC: 1

8 Aug 1969

5975-00-702-6807
Electrical Cable Protector

007026807
7438429G1: RNCC: 3 | RNVC: 9
7438429G1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-039-5913
Interconnecting Box

010395913
12000029: RNCC: 3 | RNVC: 2

23 Apr 1977

5975-00-051-3994
Top Cover

000513994
0N008940: RNCC: 3 | RNVC: 2

11 May 1967

5975-01-118-3169
Electrical Equipment Cabinet

011183169
A51T72550-1: RNCC: 3 | RNVC: 9
A51T72550-1: RNCC: 5 | RNVC: 9
A51T72550-1: RNCC: C | RNVC: 1

1 Sep 1981

5975-01-121-6063
Hydraulic Tub Mount

011216063
344680-2: RNCC: 3 | RNVC: 2
344680-2: RNCC: 8 | RNVC: 2

6 Nov 1981

5975-01-122-9254
Electrical Components Tie Down Strap

011229254
10S300-2-112: RNCC: 3 | RNVC: 9
10S300-2-112: RNCC: C | RNVC: 1

2 Dec 1981

5975-00-417-8815
Junction Box Assembly

004178815
375875-40: RNCC: 3 | RNVC: 2

18 Nov 1970

5975-00-280-3824
Electrical Conduit Ferrule-Nut Coupling

002803824
A25834: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-6050
Electrical Box Connector

002806050
2005: RNCC: 3 | RNVC: 2
1054504: RNCC: 5 | RNVC: 2
1054504: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-752-4920
Electrical Conduit Ferrule-Nut Coupling

007524920
7524920: RNCC: 3 | RNVC: 2
0-37374-171: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-752-4919
Electrical Conduit Ferrule-Nut Coupling

007524919
7524919: RNCC: 3 | RNVC: 2
0-37374-141: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-665-1122
Electrical Equipment Cabinet

006651122
RX303150: RNCC: 3 | RNVC: 2
CY1373URN3: RNCC: 5 | RNVC: 2

1 Jun 1966

5975-00-338-9072
Telegraph Key Strap

003389072
K884475: RNCC: 3 | RNVC: 9
K884475: RNCC: 5 | RNVC: 9
85167: RNCC: 5 | RNVC: 9
DSA10137: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-5380
Flexible Metal Conduit

002405380
C198-1000: RNCC: 3 | RNVC: 2
C198-1000: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-011-2569
Wiring Electrical Duct Support

010112569
0N125406: RNCC: 3 | RNVC: 2

20 Oct 1975

5975-00-988-5815
Electrical Cable Nipple

009885815
449926-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-705-7572
Electrical Conduit Elbow

007057572
7057572: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-021-3134
Cables Junction Box

010213134
15G14BFPN-16: RNCC: 3 | RNVC: 2

13 May 1976

5975-01-008-7739
Electrical-Electronic Equipment Chassis

010087739
0N205594: RNCC: 3 | RNVC: 2

30 Aug 1975

5975-01-008-7740
Electrical-Electronic Equipment Chassis

010087740
0N205596-1: RNCC: 3 | RNVC: 2

30 Aug 1975

5975-00-234-6776
Electrical Conduit Bushing

002346776
73D: RNCC: 3 | RNVC: 2
73S: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-717-6713
Electrical Conduit Ferrule

007176713
6780820-07: RNCC: 3 | RNVC: 2
6780820-07: RNCC: 5 | RNVC: 2
6780820-7: RNCC: 5 | RNVC: 2
6780820-7: RNCC: 5 | RNVC: 2
6780820-07: RNCC: 5 | RNVC: 9
6780820-7: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-090-1115
Flexible Metal Conduit Assembly

000901115
ASB64: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-089-1880
Electrical Box Connector

000891880
CG2575: RNCC: 3 | RNVC: 2
2531: RNCC: 3 | RNVC: 2
SR-754: RNCC: 5 | RNVC: 2
2543: RNCC: 5 | RNVC: 2
6513: RNCC: 5 | RNVC: 2
SR-754: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-090-3725
Electrical Equipment Mounting Base

000903725
12265-1B: RNCC: 3 | RNVC: 9
MT14AARN1: RNCC: 5 | RNVC: 2
12265-1B: RNCC: 5 | RNVC: 9
12265-1B: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-090-4823
Flexible Metal Conduit Assembly

000904823
2206-702: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-011-5253
Slide Telescopic

010115253
6620351L: RNCC: 3 | RNVC: 2
7903167-00: RNCC: 5 | RNVC: 2

23 Oct 1975

5975-00-232-4125
Rigid Metal Conduit Assembly

002324125
53-65028-5: RNCC: 3 | RNVC: 2

19 Oct 1970

5975-00-232-4130
Rigid Metal Conduit Assembly

002324130
53-65028-10: RNCC: 3 | RNVC: 2

19 Oct 1970

5975-00-232-4132
Rigid Metal Conduit Assembly

002324132
53-65028-3: RNCC: 3 | RNVC: 2

19 Oct 1970

5975-00-832-9697
Electrical Conduit

008329697
7445343-602: RNCC: 3 | RNVC: 2

4 Apr 1967

5975-00-830-2898
Clamp Assembly

008302898
5C11-7: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-024-3609
Blank Panel

010243609
8400A/FM-2011: RNCC: 3 | RNVC: 2
324079: RNCC: 5 | RNVC: 2

9 Jul 1976

5975-00-347-5685
Rigid Metal Conduit Assembly

003475685
XH2961: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-169-4395
Cable Retainer

001694395
8250-185: RNCC: 3 | RNVC: 2

21 Aug 1972

5975-00-065-3260
Electrical Conduit Tee

000653260
DBG610: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-701-0393
Electrical Box Connector

007010393
5051: RNCC: 3 | RNVC: 2
4050: RNCC: 5 | RNVC: 9
20300: RNCC: 5 | RNVC: 9
720: RNCC: 5 | RNVC: 9
1020-S: RNCC: 5 | RNVC: 9

9 Feb 1968

5975-01-007-7316
Case Pc Board

010077316
5070076-00: RNCC: 3 | RNVC: 2

9 Aug 1975

5975-00-081-9854
Electrical Equipment Rack

000819854
10659002: RNCC: 3 | RNVC: 2

13 Dec 1967

5975-01-039-9748
Electrical Box Connector

010399748
2536: RNCC: 3 | RNVC: 2

28 Apr 1977

5975-01-097-4703
Blank Panel

010974703
40181: RNCC: 3 | RNVC: 9

12 Jul 1980

5975-00-448-3163
Conduit Assy-Eng Se

004483163
5116427-8: RNCC: 3 | RNVC: 2
5116427-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-021-3135
Cables Junction Box

010213135
15G14BGPN-12: RNCC: 3 | RNVC: 2

13 May 1976

5975-00-322-0346
Flange Collar

003220346
20621: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-819-6243
Electrical Grounding Plate

008196243
56407: RNCC: 3 | RNVC: 2
56407: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-591-8159
Blank Panel

005918159
L297566-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-108-6098
Elbow

011086098
W-10891-10: RNCC: 3 | RNVC: 2

2 Mar 1981

5975-01-006-7080
Electrical-Electronic Equipment Chassis

010067080
G390795: RNCC: 3 | RNVC: 9
G390795: RNCC: 5 | RNVC: 9
G390795: RNCC: C | RNVC: 1

21 Jul 1975

5975-00-335-1713
Plate

003351713
CE14536: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-122-9248
Electrical Components Tie Down Strap

011229248
10S300-2-105: RNCC: 3 | RNVC: 9
10S300-2-105: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-131-4232
Electrical Equipment Mounting Base

011314232
622-1680-002: RNCC: 3 | RNVC: 2

11 May 1982

5975-01-042-8693
Blank Panel

010428693
0N205571: RNCC: 3 | RNVC: 2

17 Jun 1977

5975-00-926-7416
Cable Strain Relief Bushing

009267416
SR6L: RNCC: 3 | RNVC: 2
255-322: RNCC: 5 | RNVC: 2

14 Sep 1966

5975-00-824-4349
Cable End Sealing K

008244349
434-3G: RNCC: 3 | RNVC: 9

11 Aug 1967

5975-01-020-4274
Center Support

010204274
7022563-00: RNCC: 3 | RNVC: 2

30 Apr 1976

5975-01-025-9990
Electrical Conductor Bushing

010259990
46-0251-1: RNCC: 3 | RNVC: 2

13 Aug 1976

5975-00-256-0361
Flexible Metal Conduit

002560361
32-75035-50: RNCC: 3 | RNVC: 2

12 Mar 1971

5975-00-548-6394
Electrical Equipment Rack

005486394
463402-100: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-665-1292
Electrical Equipment Mounting Base

006651292
SCD40696: RNCC: 3 | RNVC: 2
MT298GR: RNCC: 3 | RNVC: 2
GA1835-14: RNCC: 3 | RNVC: 2
SCDL40692: RNCC: 5 | RNVC: 2
GA1835-14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-063-8236
Electrical Equipment Mounting Base

010638236
623-2498-001: RNCC: 3 | RNVC: 2
MT-4860/U: RNCC: 5 | RNVC: 2
623-2498-001: RNCC: C | RNVC: 1

13 Aug 1978

5975-00-302-1088
Electrical Conduit Elbow

003021088
104068118: RNCC: 3 | RNVC: 2
7716689: RNCC: 5 | RNVC: 2
500846: RNCC: 5 | RNVC: 9
500846: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-126-7341
Electrical Equipment Cabinet

011267341
A44206-001: RNCC: 3 | RNVC: 2

16 Feb 1982

5975-01-046-4763
Electrical Components Tie Down Strap

010464763
238-0673: RNCC: 3 | RNVC: 2
SST4I: RNCC: 5 | RNVC: 2

18 Aug 1977

5975-00-283-3665
Junction Assembly T

002833665
77D605507G001: RNCC: 3 | RNVC: 2

22 Aug 1973

5975-00-681-4728
Electrical Conduit Bushing

006814728
B400: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-103-9615
Electrical Conductor Bushing

011039615
2F17-18-4: RNCC: 3 | RNVC: 2
C187Z2C9: RNCC: 5 | RNVC: 2

23 Nov 1980

5975-00-373-3401
Bushing Nut

003733401
49A14915: RNCC: 3 | RNVC: 9
49A14915: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-2865
Electrical Conduit Elbow

002962865
LBY3: RNCC: 3 | RNVC: 2
LB43: RNCC: 5 | RNVC: 2
1482: RNCC: 5 | RNVC: 2
19-100: RNCC: 5 | RNVC: 9
HL-423: RNCC: 5 | RNVC: 9
353: RNCC: 5 | RNVC: 9
392: RNCC: 5 | RNVC: 9
327: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-603-5731
Clenching Rim Clamp

006035731
SMB287309: RNCC: 3 | RNVC: 2
SMB287309: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-358-7916
Spark Plug Terminal Sleeve

003587916
2215: RNCC: 3 | RNVC: 2
2215: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-578-9255
Blank Panel

005789255
95C3: RNCC: 3 | RNVC: 9
101-052-033: RNCC: 5 | RNVC: 9
95B3: RNCC: 5 | RNVC: 9
P339748: RNCC: 5 | RNVC: 9
95B3: RNCC: 5 | RNVC: 9
P339748: RNCC: 5 | RNVC: 9
95C3: RNCC: 5 | RNVC: 9
101-052-033: RNCC: 5 | RNVC: 9
101-052-033: RNCC: C | RNVC: 1
P339748: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-548-5240
Electrical Conduit Coupling Nut

005485240
5276396: RNCC: 3 | RNVC: 2
5276396: RNCC: 3 | RNVC: 2
503518: RNCC: 5 | RNVC: 2
BREX2PT345680: RNCC: 5 | RNVC: 2
H004-0345680: RNCC: 5 | RNVC: 2
118-22B16: RNCC: 5 | RNVC: 2
118-22B16: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-5254
Electrical Conduit Adapter

005485254
10-35875-201: RNCC: 3 | RNVC: 2
10-35875-201: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-076-8668
Electrical Components Tie Down Strap

010768668
435-0001-040: RNCC: 3 | RNVC: 2
10035: RNCC: 3 | RNVC: 2
T50ML: RNCC: 3 | RNVC: 2
SSC-4: RNCC: 3 | RNVC: 2
11156274-2: RNCC: 5 | RNVC: 2
T50ML: RNCC: 5 | RNVC: 2
435-0001-040: RNCC: 7 | RNVC: 2

13 May 1979

5975-01-048-4920
Electrical Equipment Mounting Base

010484920
84510-3: RNCC: 3 | RNVC: 2

26 Sep 1977

5975-01-068-2088
Electrical Components Tie Down Strap

010682088
TY8-0: RNCC: 3 | RNVC: 2

17 Nov 1978

5975-01-069-7461
Strain Electrical Conductor Clamp

010697461
6030004: RNCC: 3 | RNVC: 2

23 Dec 1978

5975-00-642-8959
Flexible Metal Conduit Assembly

006428959
5334403-604: RNCC: 3 | RNVC: 2
5334403-604: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-916-9453
Electrical Grounding Plate

009169453
9072008: RNCC: 3 | RNVC: 2

29 Jul 1966

5975-00-563-4572
Flexible Metal Conduit

005634572
G100: RNCC: 3 | RNVC: 2

22 Oct 1969

5975-00-565-7593
Electrical Box Connector

005657593
33-64: RNCC: 3 | RNVC: 2
149-054-0002: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-064-5592
Electrical Components Tie Down Strap

010645592
TF4: RNCC: 3 | RNVC: 2
RT550: RNCC: 3 | RNVC: 2
WIT-30R-MIL: RNCC: 3 | RNVC: 2
T30R: RNCC: 3 | RNVC: 2
TF4: RNCC: 5 | RNVC: 2
08-376: RNCC: 5 | RNVC: 9
WIT-30R: RNCC: 5 | RNVC: 9
TF4: RNCC: 5 | RNVC: 9
10406721: RNCC: 6 | RNVC: 9
094787-0003: RNCC: 7 | RNVC: 2

26 Aug 1978

5975-01-114-7967
Electrical Box Connector

011147967
5245: RNCC: 3 | RNVC: 2

23 Jun 1981

5975-00-916-5796
Mounting Strap

009165796
T1657: RNCC: 3 | RNVC: 9

11 Jul 1966

5975-00-562-1192
Electrical Conductor Bushing

005621192
123234: RNCC: 3 | RNVC: 9
5182780: RNCC: 5 | RNVC: 2
5182780: RNCC: 5 | RNVC: 9
5182780: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-110-4984
Outlet Box Base

011104984
112614: RNCC: 3 | RNVC: 9

2 Apr 1981

5975-01-085-5588
Electrical Equipment Rack Base

010855588
2575487-901: RNCC: 3 | RNVC: 2

10 Nov 1979

5975-00-382-9977
Electrical-Electronic Equipment Chassis

003829977
281E403G1: RNCC: 3 | RNVC: 2

21 Mar 1974

5975-00-333-6302
Flexible Metal Conduit Assembly

003336302
5334403-782: RNCC: 3 | RNVC: 2
5334403-782: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-333-6299
Flexible Metal Conduit Assembly

003336299
5334403-628: RNCC: 3 | RNVC: 2
5334403-628: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-623-0298
Flexible Metal Conduit Assembly

006230298
S2206-513: RNCC: 3 | RNVC: 2
S1790-513: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-106-5323
Electrical-Electronic Equipment Chassis

011065323
004648: RNCC: 3 | RNVC: 2

21 Jan 1981

5975-01-106-7957
Junction Box

011067957
12297863: RNCC: 3 | RNVC: 2

25 Jan 1981

5975-00-548-8903
Cable Collar

005488903
117-3B0375: RNCC: 3 | RNVC: 2
117-310375: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-054-5558
Cable Marker Sleeve

010545558
ST650713A19P46: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

21 Jan 1978

5975-01-054-6693
Cable Marker Sleeve

010546693
ST650713A19P38: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

24 Jan 1978

5975-00-328-7835
Electrical Wire Clamp

003287835
161-54040-3: RNCC: 3 | RNVC: 2
5C8-11: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-936-1404
Inductor Bracket

009361404
342125: RNCC: 3 | RNVC: 2

20 Feb 1970

5975-01-101-5615
Cable Marker Sleeve

011015615
322367-8: RNCC: 3 | RNVC: 2
322367-8: RNCC: 5 | RNVC: 9
322367-8: RNCC: 8 | RNVC: 2

3 Oct 1980

5975-00-360-2166
Electrical Equipment Cabinet

003602166
3342110: RNCC: 3 | RNVC: 2

6 Feb 1974

5975-00-388-9058
Cable Marker Sleeve

003889058
AN4028-5-4: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-295-9763
Electrical Conduit Elbow

002959763
AN3104-2: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-296-0812
Stuffing Tube Packing Nut

002960812
417726PC7: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-326-9048
Electrical Equipment Mounting Base

003269048
AR5860: RNCC: 3 | RNVC: 2

26 Mar 1982

5975-00-296-9959
Electrical Conduit Coupling Nut

002969959
77269-01: RNCC: 3 | RNVC: 2
77269-01: RNCC: 5 | RNVC: 9
77269-01: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-607-8587
Kick O Adapter Assy

006078587
139: RNCC: 3 | RNVC: 2
139: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-913-3170
Electrical Conduit Adapter

009133170
613: RNCC: 3 | RNVC: 2
364-S: RNCC: 3 | RNVC: 2
RB200-100: RNCC: 5 | RNVC: 2
13313: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-284-6637
Ground Rod

002846637
920-800: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-9519
Electrical Conduit Coupling Nut

002809519
36A2212-6: RNCC: 3 | RNVC: 9
118-1-1000: RNCC: 5 | RNVC: 2
118-1-1000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-071-7749
Flanged Elect Elbow

010717749
4049T37G01: RNCC: 3 | RNVC: 2

14 Feb 1979

5975-00-122-2424
Flexible Metal Conduit Assembly

001222424
5114173-31: RNCC: 3 | RNVC: 2
5114173-31: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-122-2421
Flexible Metal Conduit Assembly

001222421
5114173-17: RNCC: 3 | RNVC: 2
5114173-17: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-394-2545
Cable Marker Sleeve

003942545
AN4028-5-5: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-01-067-2507
Electrical Box Connector

010672507
8225: RNCC: 3 | RNVC: 2
D-381-S: RNCC: 5 | RNVC: 9
21401: RNCC: 5 | RNVC: 9

27 Oct 1978

5975-00-166-5800
Cable Hanger

001665800
131-0271-00: RNCC: 3 | RNVC: 2

9 Feb 1973

5975-00-669-7247
Flexible Metal Conduit Assembly

006697247
20-550-3553-4: RNCC: 3 | RNVC: 9
20-550-3553-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-9406
Flexible Metal Conduit Assembly

006699406
4394793-532: RNCC: 3 | RNVC: 2
4394793-532: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-8509
Flexible Metal Conduit Assembly

006698509
2355018-504: RNCC: 3 | RNVC: 2
2355018-504: RNCC: 5 | RNVC: 9
2355018-504: RNCC: 5 | RNVC: 9
2355018-502: RNCC: 5 | RNVC: 9

23 Mar 1966

5975-00-669-9491
Flexible Metal Conduit

006699491
367445PC47: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-067-3334
Electrical Conduit Elbow

000673334
LS963-10: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-067-9720
Electrical Box Connector

000679720
19974-1: RNCC: 3 | RNVC: 2

11 Jul 1967

5975-00-134-5688
Junction Box Assembly

001345688
37699-100: RNCC: 3 | RNVC: 2

20 Aug 1969

5975-01-055-1311
Cable Marker Sleeve

010551311
ST650713A1A18: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

1 Feb 1978

5975-00-138-7753
Right Indexing Pin

001387753
4320-507: RNCC: 3 | RNVC: 2

30 Jul 1971

5975-00-369-6736
Electrical Equipment Mounting Base

003696736
MT28ARN5: RNCC: 3 | RNVC: 2

12 Jul 1972

5975-00-711-0075
Invert * Box Assembly

007110075
412285-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-493-3453
Junction Box

004933453
ZT48-60A-36: RNCC: 3 | RNVC: 2
ZT48-60A-36: RNCC: 5 | RNVC: 2
MT1006-050-208: RNCC: 5 | RNVC: 9
ZT48-60A-36: RNCC: 5 | RNVC: 9

20 Feb 1970

5975-00-374-3606
Electrical Conduit Ferrule

003743606
EY528: RNCC: 3 | RNVC: 2
EY528: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-056-7338
Electrical Components Tie Down Strap

010567338
PLC1M-S4: RNCC: 3 | RNVC: 2
137555-0001: RNCC: 5 | RNVC: 2
91479179: RNCC: 5 | RNVC: 9
PLC1M-S4-CO: RNCC: 5 | RNVC: 9
40-009659-1: RNCC: 7 | RNVC: 2
5924763-1: RNCC: C | RNVC: 1

28 Feb 1978

5975-00-710-7099
Chassis Base

007107099
575647: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-364-2603
Electrical Cable Nipple

003642603
9367A: RNCC: 3 | RNVC: 2
9367A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-923-5227
Retainer

009235227
2344B0067: RNCC: 3 | RNVC: 2
2344B0067: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-355-6018
Cable Marker Sleeve

003556018
446712-36: RNCC: 3 | RNVC: 2

6 Feb 1974

5975-00-355-6039
Cable Marker Sleeve

003556039
446712-35: RNCC: 3 | RNVC: 2

6 Feb 1974

5975-00-838-7904
Electrical Conduit Sealing Fitting

008387904
EYS3: RNCC: 3 | RNVC: 2
EYS3: RNCC: 5 | RNVC: 9
EY100: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-521-0600
Coupling Nut

005210600
5604REV1: RNCC: 3 | RNVC: 2
5604REV1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-774-5556
Electrical Equipment Rack

007745556
700R363G01: RNCC: 3 | RNVC: 2
MT2133APQ72: RNCC: 5 | RNVC: 2
700R363G01: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-774-0056
Electrical Conduit Coupling

007740056
A342345F: RNCC: 3 | RNVC: 2
7740056: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-627-6534
Connector

006276534
L2088525-1: RNCC: 3 | RNVC: 2
2088525-1: RNCC: 5 | RNVC: 2

24 Jan 1968

5975-01-060-7438
Electrical-Electronic Equipment Chassis

010607438
4027002: RNCC: 3 | RNVC: 2

29 May 1978

5975-00-220-1974
Electrical Equipment Drawer

002201974
9066295: RNCC: 3 | RNVC: 2

29 Jan 1969

5975-00-483-4694
Electrical Equipment Cabinet

004834694
0N047127-1: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-00-483-4910
Electrical-Electronic Equipment Chassis

004834910
0N057253: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-00-891-8828
Rigid Nonmetallic Conduit

008918828
7445343-260: RNCC: 3 | RNVC: 2

20 Jan 1967

5975-00-622-4297
Electrical Components Tie Down Strap

006224297
TY37M0: RNCC: 3 | RNVC: 2

27 Feb 1975

5975-00-719-4242
Silicone Molded Shi

007194242
0P185L14: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-058-3816
Interconnecting Box

010583816
2540707: RNCC: 3 | RNVC: 2

27 Mar 1978

5975-00-465-9507
Junction Box Cover

004659507
C4E1097-11: RNCC: 3 | RNVC: 2

19 Jan 1970

5975-00-919-3715
Interconnecting Box

009193715
3-61380-1: RNCC: 3 | RNVC: 2
3-61380-1: RNCC: 3 | RNVC: 9
3-61380-1: RNCC: 5 | RNVC: 9

5 Aug 1966

5975-00-919-9982
Pushbutton

009199982
553-0806-003: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-901-3180
Electrical Cable Nipple

009013180
LS9747-11: RNCC: 3 | RNVC: 2

13 Feb 1967

5975-00-119-3977
Electrical Cable Protector

001193977
1383842: RNCC: 3 | RNVC: 2

23 Oct 1968

5975-00-918-2965
Electrical Cable Nipple

009182965
10211988: RNCC: 3 | RNVC: 2

10 Aug 1966

5975-00-058-2205
Electrical Conduit Bend

000582205
WC571: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-900-0438
Conduit

009000438
10C2B12-6: RNCC: 3 | RNVC: 2

3 Feb 1967

5975-00-590-5935
Cable Collar

005905935
393691PC90: RNCC: 3 | RNVC: 2
393691PC9: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-992-9036
Electrical Conduit Adapter

009929036
2592N52: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-892-9085
Electrical Equipment Cabinet

008929085
CY2580GT: RNCC: 3 | RNVC: 2
FR15ADWG6255-1ASSYAS2529: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-602-6735
Electrical Conduit Coupling Nut

006026735
118-22B12: RNCC: 3 | RNVC: 2
118-22B12: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-070-9182
Electrical Equipment Mounting Base

010709182
100-476998-000: RNCC: 3 | RNVC: 2

24 Jan 1979

5975-00-566-9393
Electrical Equipment Mounting Base

005669393
B196-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-797-2997
Electrical Equipment Rack

007972997
CE186992-17: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-3090
Electrical Equipment Rack

007973090
CE186993-12: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-797-3079
Electrical Equipment Rack

007973079
CE186993-10: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-2891
Electrical Equipment Rack

007972891
CE186992-5: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-402-2906
Interconnecting Box

004022906
131024-1: RNCC: 3 | RNVC: 2
J2930TPS32: RNCC: 5 | RNVC: 2

10 Apr 1970

5975-00-779-3319
Electrical Components Tie Down Strap

007793319
MS17821-2-9: RNCC: 2 | RNVC: 2
MIS17332-1-11: RNCC: 5 | RNVC: 1
3522 500 19191: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-777-6781
Ground Rod

007776781
7541542: RNCC: 3 | RNVC: 2
MILR11461: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-789-3388
Electrical Conduit Locknut

007893388
GL125: RNCC: 3 | RNVC: 2

27 Mar 1968

5975-00-392-7971
Junction Box

003927971
GB16: RNCC: 3 | RNVC: 9
TA77FT: RNCC: 5 | RNVC: 2
GB16: RNCC: 5 | RNVC: 9
GB16: RNCC: 5 | RNVC: 9
GB16: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-556-0846
Flexible Metal Conduit Assembly

005560846
E1199-602-1200: RNCC: 3 | RNVC: 2
E1199-602-1200: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-333-6305
Flexible Metal Conduit Assembly

003336305
5334403-868: RNCC: 3 | RNVC: 2
5334403-868: RNCC: 5 | RNVC: 9
5334403-590: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-936-9549
Electrical Components Tie Down Strap

009369549
MS3367-3-3: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
TY27M3: RNCC: 5 | RNVC: 1
SST4H3: RNCC: 5 | RNVC: 1
MS17821-3-3: RNCC: 5 | RNVC: 9

15 Mar 1967

5975-01-237-5769
Blank Panel

012375769
12-165546-1: RNCC: 3 | RNVC: 2

1 Aug 1986

5975-01-235-0212
Wiring Duct

012350212
LD10WH6-A: RNCC: 3 | RNVC: 2

24 Jun 1986

5975-00-011-0938
Electrical-Electronic Equipment Chassis

000110938
40965-401-111: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-759-7340
Handle Ferrule

007597340
5010F1D: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-098-8856
Electrical Grounding Plate

010988856
SM-C-447172: RNCC: 3 | RNVC: 2

8 Aug 1980

5975-00-765-4271
Electrical-Electronic Equipment Chassis

007654271
9006548: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-966-1941
Rigid Metal Conduit

009661941
775159-29: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-089-8641
Electrical Equipment Cabinet

010898641
11456554: RNCC: 3 | RNVC: 2

8 Feb 1980

5975-01-068-3043
Electrical Components Tie Down Strap

010683043
TY3: RNCC: 3 | RNVC: 2

19 Nov 1978

5975-01-229-0401
Junction Box Assembly

012290401
799E373: RNCC: 3 | RNVC: 2

24 Mar 1986

5975-00-413-4428
Cable Marker Sleeve

004134428
SS7026-20: RNCC: 3 | RNVC: 2
SS7026-20: RNCC: 8 | RNVC: 2

1 May 1970

5975-00-316-2350
Electrical Conduit Coupling

003162350
20640: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-003-2787
Electrical Equipment Rack

000032787
546-7019-002: RNCC: 3 | RNVC: 2

7 Nov 2000

5975-00-989-0143
Electrical Equipment Cabinet

009890143
SF50: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-01-096-9614
Standa Box Assembly

010969614
121985: RNCC: 3 | RNVC: 9

2 Jul 1980

5975-00-413-4425
Cable Marker Sleeve

004134425
SS7026-17: RNCC: 3 | RNVC: 2
SS7026-17: RNCC: 8 | RNVC: 2

1 May 1970

5975-00-978-0612
Electrical Strapping

009780612
9746821-2: RNCC: 3 | RNVC: 2
E25-51: RNCC: 3 | RNVC: 9
AV5: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-217-6213
Electrical Components Tie Down Strap

012176213
10S300-2-44: RNCC: 3 | RNVC: 9
10S300-2-44: RNCC: C | RNVC: 1

28 Sep 1985

5975-00-399-6100
Electrical Conduit Ferrule

003996100
36A2213-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-827-3965
Electrical Equipment Rack

008273965
522-0240-003: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-560-5068
Junction Box Cover

005605068
37F82921-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-559-5676
Mounting Plate

005595676
24080: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-320-3150
Flexible Metal Conduit Assembly

003203150
5334403-600: RNCC: 3 | RNVC: 2
5334403-600: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-084-9167
Electrical Bonding Ring

010849167
3271455-1: RNCC: 3 | RNVC: 2

26 Oct 1979

5975-00-782-6389
Electrical Conduit Ferrule

007826389
72-450: RNCC: 3 | RNVC: 9
AF45M: RNCC: 5 | RNVC: 9

19 Feb 1968

5975-01-014-2964
Electrical Equipment Drawer

010142964
9211-1165: RNCC: 3 | RNVC: 2
9211-1165: RNCC: 3 | RNVC: 9
9211-1165: RNCC: 5 | RNVC: 9

19 Dec 1975

5975-00-960-2170
Electrical Standardized Components Case

009602170
0N008502-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-544-0331
Electrical-Electronic Equipment Chassis

005440331
8031516: RNCC: 3 | RNVC: 2

6 Oct 1974

5975-01-008-9957
Electrical-Electronic Equipment Chassis

010089957
G354863: RNCC: 3 | RNVC: 9
G354863: RNCC: 5 | RNVC: 9
G354863: RNCC: C | RNVC: 1

1 Sep 1975

5975-00-089-7694
Electrical Equipment Mounting Base

000897694
MT3823GRC: RNCC: 3 | RNVC: 2

18 Jul 1967

5975-01-014-2963
Electrical Equipment Drawer

010142963
9211-1164: RNCC: 3 | RNVC: 2
9211-1164: RNCC: 3 | RNVC: 9
9211-1164: RNCC: 5 | RNVC: 9

19 Dec 1975

5975-00-927-7475
Conduit Hub

009277475
ST7: RNCC: 3 | RNVC: 9

17 Aug 1966

5975-00-327-5066
Electrical Equipment Rack

003275066
MT1579G: RNCC: 3 | RNVC: 2
SMD195031: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-500-0166
Electrical Equipment Mounting Base

005000166
434102-01-01: RNCC: 3 | RNVC: 2
SCDFA0003-3: RNCC: 5 | RNVC: 2

6 Jul 1974

5975-00-522-5563
Flexible Metal Conduit Assembly

005225563
5334403-626: RNCC: 3 | RNVC: 2
5334403-626: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-534-3697
Cable Marker Sleeve

005343697
5343697: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-9966
Electrical Conduit Coupling Nut

002969966
E1026-29B2P: RNCC: 3 | RNVC: 2
23350: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-521-1987
Flexible Metal Conduit Assembly

005211987
5116427-19: RNCC: 3 | RNVC: 2
5116427-19: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-430-8082
Cable Marker Sleeve

004308082
10159118-8: RNCC: 3 | RNVC: 2

11 Feb 1972

5975-00-436-1822
Rigid Metal Conduit Assembly

004361822
800733-00: RNCC: 3 | RNVC: 2

24 Mar 1969

5975-01-054-6723
Electrical Components Tie Down Strap

010546723
C61703AA1125: RNCC: 3 | RNVC: 9

24 Jan 1978

5975-01-049-2831
Junction Box

010492831
7972851: RNCC: 3 | RNVC: 2

15 Oct 1977

5975-01-006-6536
Bushing-Coaxial Con

010066536
47924: RNCC: 3 | RNVC: 2

21 Jul 1975

5975-00-255-2441
Electrical Components Tie Down Strap

002552441
PLT1MC30: RNCC: 3 | RNVC: 2
KCF00-003: RNCC: 5 | RNVC: 9

20 Jun 1973

5975-00-306-2309
Electrical Standardized Components Case

003062309
GS55101DRAWINGS0062548: RNCC: 3 | RNVC: 2
GS55101DRAWINGS0062548: RNCC: 5 | RNVC: 9
GS55101DRAWINGS0D62548: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-432-4519
Electrical Conduit Ferrule

004324519
AN3052-24: RNCC: 2 | RNVC: 2
11-3-24: RNCC: 5 | RNVC: 1
11-3-24: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-089-5508
Electrical Components Tie Down Strap

010895508
MS3368-3-7C: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

4 Feb 1980

5975-01-087-1434
Cable Bracket

010871434
527R270H01: RNCC: 3 | RNVC: 2

12 Dec 1979

5975-00-419-7770
Bushing

004197770
1562536: RNCC: 3 | RNVC: 2

2 Dec 1970

5975-00-955-0017
Electrical Conduit Nipple

1 Jan 1962

5975-01-087-6377
Electrical Conduit Adapter

010876377
10684037-6: RNCC: 1 | RNVC: 2
6060-09-041-15: RNCC: 3 | RNVC: 2

21 Dec 1979

5975-00-322-3711
Electrical Equipment Rack

003223711
463573-110: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-753-7669
Spacer

007537669
LS7882-450: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-012-0534
Electrical-Electronic Equipment Chassis

010120534
G354622: RNCC: 3 | RNVC: 9
G354622: RNCC: 5 | RNVC: 9
G354622: RNCC: C | RNVC: 1

5 Nov 1975

5975-00-320-8962
Electrical Equipment Drawer

003208962
43916: RNCC: 3 | RNVC: 2
MX1209GPN: RNCC: 5 | RNVC: 2

1 Nov 1967

5975-01-105-0287
Electrical Equipment Drawer

011050287
54342-40765: RNCC: 3 | RNVC: 2

15 Dec 1980

5975-00-955-9268
Chassis Base

009559268
CB651: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-956-1367
Electrical Conduit Locknut

009561367
152: RNCC: 3 | RNVC: 2
22: RNCC: 5 | RNVC: 2
BL500: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-448-3178
Conduit Assembly

004483178
5143436-5: RNCC: 3 | RNVC: 2
5143436-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-955-1724
Rh Support Assembly

009551724
0N008030: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-947-0206
Junction Box

009470206
6-60305-13: RNCC: 3 | RNVC: 9
6-60305-13: RNCC: C | RNVC: 1

18 Mar 1966

5975-00-840-0045
Electrical Components Tie Down Strap

008400045
TY37MX: RNCC: 3 | RNVC: 2
TY37MX: RNCC: 5 | RNVC: 2
5422912: RNCC: 5 | RNVC: 2
98245763: RNCC: 5 | RNVC: 2
PLC4H-S25-0: RNCC: 5 | RNVC: 2
PLC4H-S25-L0: RNCC: 5 | RNVC: 2
PLC4H-S25-TL0: RNCC: 5 | RNVC: 2
542.2912.02: RNCC: 5 | RNVC: 2
TY537MX: RNCC: 5 | RNVC: 2
TY537MX: RNCC: 5 | RNVC: 2

16 Dec 1966

5975-01-101-0269
Cable Hanger

011010269
CK25A: RNCC: 3 | RNVC: 2

18 Sep 1980

5975-00-284-6374
Electrical Cable Nipple

002846374
A5255: RNCC: 3 | RNVC: 2
375437: RNCC: 3 | RNVC: 9
A27487: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-065-3308
Flexible Metal Conduit Assembly

000653308
ASP62-0100FF: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-761-2833
Clamp

007612833
C231: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-064-5366
Electrical Equipment Shelf

000645366
SC-D-19814: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-9524
Electrical Conduit Coupling Nut

002809524
B15403: RNCC: 3 | RNVC: 2
M421475-3: RNCC: 5 | RNVC: 2
421275-3: RNCC: 5 | RNVC: 2
865539-3: RNCC: 5 | RNVC: 2
118-1-0375: RNCC: 5 | RNVC: 2
118-1-0375: RNCC: 5 | RNVC: 9
421275-3: RNCC: 5 | RNVC: 9
865539-3: RNCC: 5 | RNVC: 9
M421475-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-8262
Electrical Conduit Coupling Nut

002808262
36A2212-4: RNCC: 3 | RNVC: 9
118-1-0625: RNCC: 5 | RNVC: 2
118-1-0625: RNCC: 5 | RNVC: 9
36A2212-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-593-9658
Clamp

005939658
88261: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-960-2169
Electrical Standardized Components Case

009602169
0N008502-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-768-6883
Sleeve

007686883
7007247: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-073-5593
Electrical Components Tie Down Strap

000735593
TY5-5: RNCC: 3 | RNVC: 2
AS40321-2: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-591-0562
Conduit Assembly

005910562
S1655-80191: RNCC: 3 | RNVC: 2
1560H34-097: RNCC: 5 | RNVC: 2
1560H34-097-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-971-4897
Voltage Reg Support

009714897
780869-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-440-1947
Multiflex Fibe Duct

004401947
189108: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-611-3174
Electrical Equipment Cabinet

006113174
7611861G2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-968-6115
Flexible Metal Conduit Assembly

009686115
ASP37-0900DE: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-051-5018
Fanning Strip

000515018
0N002495: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-594-6273
Cover

005946273
4560133: RNCC: 3 | RNVC: 2

3 Jan 1975

5975-00-725-6377
Electrical Wall Plate

007256377
5053: RNCC: 3 | RNVC: 9
860425-4: RNCC: 5 | RNVC: 9
860425-4: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-615-8679
Electrical Box Connector

006158679
DB3516: RNCC: 3 | RNVC: 2
1668669-1: RNCC: 5 | RNVC: 2
766825-1: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-503-0803
Electrical Equipment Cabinet

005030803
41-16716: RNCC: 3 | RNVC: 2
CY1346GR: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-503-1857
Junction Box

005031857
102511: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-006-2808
Blank Panel

010062808
100-1930: RNCC: 3 | RNVC: 9

15 Jul 1975

5975-00-681-0862
Electrical Equipment Cabinet

006810862
CA202: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-521-2048
Flexible Metal Conduit Assembly

005212048
5143436-6: RNCC: 3 | RNVC: 2
5143436-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-079-4165
Electrical Entrance Cap

000794165
1529: RNCC: 3 | RNVC: 2
17-150: RNCC: 5 | RNVC: 9
374: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-549-3189
Electrical Grounding Plate

005493189
832657-11: RNCC: 3 | RNVC: 2
832657-11: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-488-8691
Electrical Conduit Coupling Nut

004888691
36A2216-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-433-5904
Electrical Box Connector

004335904
TC123A: RNCC: 3 | RNVC: 2
91T100: RNCC: 5 | RNVC: 2
2004: RNCC: 5 | RNVC: 2
5055: RNCC: 5 | RNVC: 2
M20-22: RNCC: 5 | RNVC: 9
232: RNCC: 5 | RNVC: 9
722: RNCC: 5 | RNVC: 9
452: RNCC: 5 | RNVC: 9
1022-S: RNCC: 5 | RNVC: 9
20302: RNCC: 5 | RNVC: 9

12 Feb 1972

5975-00-613-2345
Ignition Cab Marker

006132345
AN4028-6: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-913-7714
Junction Box

009137714
509AL: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-075-5190
Junction Box

000755190
MT1043-050-010: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-636-0064
Flexible Metal Conduit

006360064
C24-3: RNCC: 3 | RNVC: 2
S153-2464: RNCC: 3 | RNVC: 2
175-0375: RNCC: 5 | RNVC: 9
AS324: RNCC: 5 | RNVC: 9
018-0192-030: RNCC: 7 | RNVC: 2
AS324: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-636-3357
Electrical Cable Protector

006363357
321891: RNCC: 3 | RNVC: 2
7413455: RNCC: 5 | RNVC: 2
321891: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-613-0920
Clenching Rim Clamp

006130920
SMA120088: RNCC: 3 | RNVC: 2
SMA120088: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-989-0147
Electrical Equipment Cabinet

009890147
CU210: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-548-5244
Electrical Conduit Coupling Nut

005485244
BREX2PT345660: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-461-3096
Electrical Conduit Coupling Nut

004613096
CA3340-24: RNCC: 3 | RNVC: 2
AN3054-24: RNCC: 5 | RNVC: 2
CA3340-24: RNCC: 5 | RNVC: 2
2360-069300-08-0: RNCC: 5 | RNVC: 2
2360-069300-08-0: RNCC: 5 | RNVC: 2

30 Apr 1969

5975-00-632-0217
Clenching Rim Clamp

006320217
699B362P1: RNCC: 3 | RNVC: 2
SM-B-285339: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-797-2921
Electrical Equipment Rack

007972921
CE186992-11: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-3012
Electrical Equipment Rack

007973012
CE186993-4: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-2924
Electrical Equipment Rack

007972924
CE186992-12: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-3001
Electrical Equipment Rack

007973001
CE186993-1: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-623-0301
Flexible Metal Conduit Assembly

006230301
50038-0702: RNCC: 3 | RNVC: 2
S2206-702: RNCC: 5 | RNVC: 2
50038-0702: RNCC: 5 | RNVC: 9
S3002-0702: RNCC: 5 | RNVC: 9
E1199-484-0702: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-868-4456
Electrical Box Connector

008684456
0N110342: RNCC: 3 | RNVC: 2

20 Oct 1967

5975-00-935-2293
Electrical Box Connector

009352293
3302M: RNCC: 3 | RNVC: 2
3302M: RNCC: 5 | RNVC: 2
11290891-1: RNCC: 5 | RNVC: 2
C11LS: RNCC: 5 | RNVC: 9

15 Nov 1968

5975-00-621-6327
Electrical Equipment Cabinet

006216327
LAC226BRLESU115: RNCC: 3 | RNVC: 2
LAC226BRLESU115: RNCC: 5 | RNVC: 9

27 Feb 1975

5975-00-617-2769
Electrical-Electronic Equipment Chassis

006172769
757-3459-001: RNCC: 3 | RNVC: 2

15 Feb 1975

5975-01-075-4497
Electrical Equipment Mounting Base

010754497
WG219A3: RNCC: 3 | RNVC: 2

21 Apr 1979

5975-00-450-1015
Electrical-Electronic Equipment Chassis

004501015
135C2978G1: RNCC: 3 | RNVC: 2

31 Oct 1997

5975-01-066-8844
Electrical Conduit

010668844
GA112-2: RNCC: 3 | RNVC: 2
CRN2646-27: RNCC: 5 | RNVC: 2
C8922-27: RNCC: 7 | RNVC: 2

20 Oct 1978

5975-00-769-5560
Electrical Conduit Bondnut

007695560
3866: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-613-0924
Clenching Rim Clamp

006130924
SMB287321: RNCC: 3 | RNVC: 2
SMB287321: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-617-3161
Electrical Conduit Coupling Nut

006173161
6173161: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-683-3945
Electrical Conduit Adapter

006833945
60B110514-8: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-682-6958
Electrical Cable Nipple

006826958
29GREEN: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-256-5119
Junction Box

002565119
0N149630: RNCC: 3 | RNVC: 2

24 Mar 1971

5975-00-258-3056
Electrical Equipment Mounting Base

002583056
681110-3: RNCC: 3 | RNVC: 2
MT4375ASN92V: RNCC: 5 | RNVC: 1

24 Jun 1973

5975-01-045-4588
Cable Collar

010454588
174245085-001: RNCC: 3 | RNVC: 2
174245085-001: RNCC: 5 | RNVC: 9

1 Aug 1977

5975-00-296-3450
Electrical Bonding Ring

002963450
9769-8: RNCC: 3 | RNVC: 9
5W2334-3: RNCC: 5 | RNVC: 9
9769-8: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-296-1627
Electrical Cable Protector

002961627
6L58018C: RNCC: 3 | RNVC: 2
03530: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-031-1303
Connector Housing

010311303
16993-7: RNCC: 3 | RNVC: 9

20 Nov 1976

5975-00-602-6740
Electrical Conduit Coupling Nut

006026740
118-1B0625: RNCC: 3 | RNVC: 2
118-1B0625: RNCC: 5 | RNVC: 2
102922: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-603-6252
Electrical Equipment Mounting Base

006036252
275002-164: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-384-8077
Multipo Front Plate

003848077
9S4474LALT30PC14: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-573-7479
Electrical Tie Down Mounting Base

005737479
TM3S8C: RNCC: 3 | RNVC: 2
867094-0005: RNCC: 5 | RNVC: 2
SC5340-0085-3: RNCC: 5 | RNVC: 9
867094-0005: RNCC: 5 | RNVC: 9

8 Dec 1974

5975-00-872-4464
Electrical-Electronic Equipment Chassis

008724464
10106968: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-407-6373
Lance Pole

004076373
SC-C-27971: RNCC: 3 | RNVC: 2
SCC27971A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-053-3134
Electrical Conduit

010533134
CRN2646-9: RNCC: 3 | RNVC: 2
GA113-6: RNCC: 5 | RNVC: 2
C8922-9: RNCC: 7 | RNVC: 2

1 Jan 1978

5975-01-053-3991
Ground Rod

010533991
W-R-550: RNCC: 4 | RNVC: 1

5 Jan 1978

5975-00-308-5138
Chassis Base

003085138
8320: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-366-5581
Cable Marker Sleeve

003665581
446712-5: RNCC: 3 | RNVC: 2

22 Feb 1974

5975-01-068-4125
Rigid Metal Conduit

010684125
32-75035-41: RNCC: 3 | RNVC: 2

25 Nov 1978

5975-01-107-5563
Electrical Conduit Bushing

011075563
8U-20: RNCC: 3 | RNVC: 2

8 Feb 1981

5975-01-106-3594
Acce Cover Assembly

011063594
116049-002: RNCC: 3 | RNVC: 2

16 Jan 1981

5975-01-109-0511
Electrical Equipment Mounting Base

011090511
139-2423-000: RNCC: 3 | RNVC: 2

9 Mar 1981

5975-00-306-2310
Electrical Standardized Components Case

003062310
GS55103DRAWINGS0062844: RNCC: 3 | RNVC: 2
GS55103DRAWINGS0D62844: RNCC: 5 | RNVC: 9
GS55103DRAWINGS0062844: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-2042
Flexible Metal Conduit Assembly

005212042
5143436-17: RNCC: 3 | RNVC: 2
5143436-17: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-097-4704
Blank Panel

010974704
40182: RNCC: 3 | RNVC: 9

12 Jul 1980

5975-00-244-4370
Electrical Conduit Ferrule

002444370
92369: RNCC: 3 | RNVC: 2
U5-45A: RNCC: 3 | RNVC: 2
E1110-23-2: RNCC: 5 | RNVC: 2
E1110-23-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-705-7570
Electrical Conduit Elbow

007057570
7057570: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-473-5595
Electrical Components Tie Down Strap

004735595
8763398: RNCC: 3 | RNVC: 2
7726507: RNCC: 5 | RNVC: 2
7949890: RNCC: 5 | RNVC: 2
666156-070: RNCC: 5 | RNVC: 2
7949890: RNCC: 5 | RNVC: 2
7726507: RNCC: 5 | RNVC: 9
5975004735595: RNCC: 5 | RNVC: 9
N5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-9435
Conduit Chase Nipple

002969435
28-0376: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-817-4476
Electrical Conduit Adapter

008174476
60B110S14-8: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-238-3697
Electrical-Electronic Equipment Chassis

002383697
723897-42: RNCC: 3 | RNVC: 2

28 Oct 1970

5975-00-552-8222
Stuffing Tube Packing Nut

005528222
143-537: RNCC: 3 | RNVC: 2
SMB348230-2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-133-8440
Junction Box

011338440
10548437: RNCC: 3 | RNVC: 2

22 Jun 1982

5975-00-250-6328
Electrical Conduit Ferrule

002506328
A1819-4: RNCC: 3 | RNVC: 2
39B3335-4: RNCC: 3 | RNVC: 2
111-0500P: RNCC: 5 | RNVC: 2
111-0500P: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-106-1053
Electrical Equipment Cabinet

011061053
57977-40005: RNCC: 3 | RNVC: 2

13 Jan 1981

5975-00-701-4971
Electrical Equipment Mounting Base

007014971
153461: RNCC: 3 | RNVC: 2
153461: RNCC: 5 | RNVC: 9
153461: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-156-3326
Junction Box Cover

001563326
227-153: RNCC: 3 | RNVC: 2
C4-4839: RNCC: 5 | RNVC: 2
811: RNCC: 5 | RNVC: 2
3395: RNCC: E | RNVC: 8

6 May 1970

5975-00-094-1862
Junction Box

000941862
1336193: RNCC: 3 | RNVC: 2
1336193: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-892-9257
Electrical Equipment Cabinet

008929257
103152: RNCC: 3 | RNVC: 2
CY3942FPA15: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-319-1183
Electr Contact Assy

003191183
NEDP334B101: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-563-1501
Electrical Equipment Mounting Base

005631501
MT274BARN6: RNCC: 3 | RNVC: 2
50F13904: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-103-2998
Electrical-Electronic Equipment Chassis

011032998
544-9293-004: RNCC: 3 | RNVC: 2

11 Nov 1980

5975-01-106-7987
Junction Box Cover

011067987
12293139: RNCC: 3 | RNVC: 2

25 Jan 1981

5975-00-370-9284
Interconnecting Box

003709284
61710610-601A: RNCC: 3 | RNVC: 2

3 Mar 1974

5975-00-189-4702
Cable Marker Sleeve

001894702
0N057432-25: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4704
Cable Marker Sleeve

001894704
0N057432-27: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4717
Cable Marker Sleeve

001894717
0N057432-39: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4719
Cable Marker Sleeve

001894719
0N057432-41: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4713
Cable Marker Sleeve

001894713
0N057432-35: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4716
Cable Marker Sleeve

001894716
0N057432-38: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-563-0185
Electrical-Electronic Equipment Chassis

005630185
20884: RNCC: 3 | RNVC: 9

15 Jan 1968

5975-00-226-1167
Flexible Metal Conduit Assembly

002261167
ASP62-0202FG: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-224-4859
Electrical Cable Splice Protector

002244859
S525314: RNCC: 3 | RNVC: 9
S6829: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-285-0343
Electrical Conduit Elbow

002850343
25878: RNCC: 3 | RNVC: 2
A27623CH5: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-546-5570
Fanning Strip

005465570
504087: RNCC: 3 | RNVC: 2
504087: RNCC: 5 | RNVC: 9

6 Oct 1974

5975-00-220-1972
Electrical Equipment Drawer

002201972
9066294: RNCC: 3 | RNVC: 2

29 Jan 1969

5975-00-223-6968
Cable Marker Sleeve

002236968
10159118-6: RNCC: 3 | RNVC: 2

22 Dec 1971

5975-00-524-6014
Electrical Conduit Tee

005246014
5246014: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-534-3549
Cable Marker Sleeve

005343549
5343549: RNCC: 3 | RNVC: 2
5343549: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-413-4427
Cable Marker Sleeve

004134427
SS7026-19: RNCC: 3 | RNVC: 2
SS7026-19: RNCC: 8 | RNVC: 2

1 May 1970

5975-00-215-5971
Adapter Bulkh Cable

002155971
1282-516: RNCC: 3 | RNVC: 2

22 Apr 1973

5975-00-217-0896
Shockmount

002170896
9G6210-217-0896REV4: RNCC: 3 | RNVC: 2
MILF16377-41: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-861-1112
Junction Box

008611112
AB-666HC: RNCC: 3 | RNVC: 2
6X6X6-16G: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-435-3636
Junction Box Cover

004353636
C4R1460-3: RNCC: 3 | RNVC: 2

17 Mar 1969

5975-00-355-8037
Electrical Conductor Bushing

003558037
11646103-5: RNCC: 3 | RNVC: 2

8 Feb 1974

5975-00-356-1887
Electri Holder Assy

003561887
123385: RNCC: 3 | RNVC: 9
S29566: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-2046
Flexible Metal Conduit Assembly

005212046
5143436-22: RNCC: 3 | RNVC: 2
5143436-22: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-1562
Electrical Equipment Mounting Base

005221562
MT-1099/U: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-272-1231
Electrical Equipment Rack

002721231
ES0000147: RNCC: 3 | RNVC: 2
ES0000147REVB: RNCC: 5 | RNVC: 2

22 Jul 1973

5975-00-419-4911
Flexible Metal Conduit Assembly

004194911
68PA1235-7: RNCC: 3 | RNVC: 2

9 Dec 1970

5975-00-432-6739
Electrical-Electronic Equipment Panel

004326739
0N056193-1: RNCC: 3 | RNVC: 2

3 May 1971

5975-00-432-9992
Electrical-Electronic Equipment Chassis

004329992
567-9218-002: RNCC: 3 | RNVC: 2

4 Feb 1972

5975-00-538-3339
Electrical Box Connector

005383339
CT1101: RNCC: 3 | RNVC: 2
003-900-004: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-234-2426
Electrical Box Connector

002342426
LS1778-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-845-2094
Electrical Equipment Cabinet

008452094
00: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-117-1084
Electrical Conduit Coupling Nut

001171084
10-319878: RNCC: 3 | RNVC: 2
10-319878: RNCC: 5 | RNVC: 2
10-319878: RNCC: 5 | RNVC: 9

4 Jan 1973

5975-00-284-6419
Electrical Conduit Coupling Nut

002846419
7376554: RNCC: 3 | RNVC: 2
1889900: RNCC: 3 | RNVC: 2
1889900: RNCC: 5 | RNVC: 9
1889900: RNCC: 5 | RNVC: 9
1889900: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-280-8997
Junction Box Cover

002808997
SC-C-40743: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-615-7258
Blank Panel

006157258
46763: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-238-9322
Interconnecting Box

002389322
9235850: RNCC: 3 | RNVC: 2
05423-00: RNCC: 5 | RNVC: 2

29 Oct 1969

5975-00-350-2742
Loom

003502742
S182X10: RNCC: 3 | RNVC: 9
A215091: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-189-4689
Cable Marker Sleeve

001894689
0N057432-14: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4690
Cable Marker Sleeve

001894690
0N057432-15: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4686
Cable Marker Sleeve

001894686
0N057432-11: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-144-3195
Electrical Cable Nipple

001443195
7318: RNCC: 3 | RNVC: 9
7318: RNCC: 5 | RNVC: 2
7318: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-351-3911
Blank Panel

003513911
SM-D-97466: RNCC: 3 | RNVC: 2
AS1188: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-335-2586
Flexible Nonmetallic Conduit

003352586
15039R: RNCC: 3 | RNVC: 9
A145813: RNCC: 5 | RNVC: 2
P10529: RNCC: 5 | RNVC: 9
P10529: RNCC: C | RNVC: 1
15039R: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-351-8429
Flexible Metal Conduit Assembly

003518429
201470-1: RNCC: 3 | RNVC: 2
G201470-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-280-5781
Electrical Conduit Ferrule

002805781
36A2215-4: RNCC: 3 | RNVC: 2
114-0625-10: RNCC: 5 | RNVC: 2
114-0625-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9719
Flexible Metal Conduit Assembly

002809719
S3043-4100: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-7794
Junction Box

002807794
17830: RNCC: 3 | RNVC: 9
6X6X4SC: RNCC: 5 | RNVC: 1

1 Jan 1960

5975-00-591-1997
Electrical Box Connector

005911997
8247-15-5: RNCC: 3 | RNVC: 2
B775-149: RNCC: 3 | RNVC: 2
31-834: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-484-9339
Conduit Outlet Cover

004849339
6-48223-7: RNCC: 3 | RNVC: 2

14 Jun 1974

5975-00-189-6047
Flexible Metal Conduit

001896047
151-0625: RNCC: 3 | RNVC: 2
151-0625: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-417-0543
Electrical Wall Plate

004170543
70-1580: RNCC: 1 | RNVC: 2
A9000: RNCC: 3 | RNVC: 2
A9000: RNCC: 3 | RNVC: 2

28 Jan 1972

5975-00-295-9316
Electrical Conduit Elbow

002959316
5585: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-295-2497
Electrical Equipment Rack Base

002952497
1138-21: RNCC: 3 | RNVC: 2

22 Sep 1973

5975-00-125-9280
Electrical Conductor Bushing

001259280
2370621G1: RNCC: 3 | RNVC: 2

27 Nov 1968

5975-00-888-4660
Rigid Metal Conduit Assembly

008884660
NAF1150-3A66: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-214-0368
Flexible Metal Conduit Assembly

002140368
5116427-26: RNCC: 3 | RNVC: 2
5116427-26: RNCC: 5 | RNVC: 9

20 Apr 1973

5975-00-295-8136
Electrical Conduit Ferrule

002958136
61558: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-483-4918
Electrical-Electronic Equipment Panel

004834918
0N057410: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-00-890-9812
Cover

008909812
0N124708: RNCC: 3 | RNVC: 2
0N108213: RNCC: 5 | RNVC: 2

10 Apr 1968

5975-00-189-6031
Flexible Metal Conduit

001896031
79427-8: RNCC: 3 | RNVC: 2
151-0500: RNCC: 5 | RNVC: 2
151-0500: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-845-2096
Electrical Equipment Cabinet

008452096
00Z: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-309-4513
Vibration Locking L

003094513
21959: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-068-4474
Electrical Equipment Cabinet

000684474
CY2523CWLR1: RNCC: 3 | RNVC: 2
K663260001: RNCC: 5 | RNVC: 2
5895-21-841-3608: RNCC: 6 | RNVC: 9

5 Jul 1967

5975-00-068-4469
Electrical Equipment Cabinet

000684469
CY2519CWLR1: RNCC: 3 | RNVC: 2
K663210001: RNCC: 5 | RNVC: 2
5895-21-841-3606: RNCC: 6 | RNVC: 9

5 Jul 1967

5975-00-284-6397
Electrical Box Connector

002846397
61004: RNCC: 3 | RNVC: 2
58A802931: RNCC: 5 | RNVC: 9
58A802931: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-247-4981
Electrical Conduit Ferrule

002474981
1110751-10: RNCC: 3 | RNVC: 2
11-2B10: RNCC: 5 | RNVC: 2
1110751-10: RNCC: 5 | RNVC: 9
11-2B10: RNCC: 5 | RNVC: 9
019-1561-170: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-296-0711
Flexible Metal Conduit Assembly

002960711
10-53354: RNCC: 3 | RNVC: 2
10-53354: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-4162
Electrical Cable Protector

002964162
A18757: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-243-5697
Electrical Conduit Coupling

002435697
AN3068-24: RNCC: 2 | RNVC: 2
25-1500: RNCC: 5 | RNVC: 1
25-2-24: RNCC: 5 | RNVC: 1
25-2-24: RNCC: 5 | RNVC: 9
25-1500: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-2531
Blank Panel

002962531
A16225: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-955-2058
Junction Box Cover

009552058
29C13: RNCC: 3 | RNVC: 2
29C13: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-242-6425
Electrical Conduit Adapter

002426425
AN3055-10-4: RNCC: 2 | RNVC: 2
9750-8512: RNCC: 5 | RNVC: 9
9750-8512: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-030-9018
Cable Hanger

000309018
101-107-102: RNCC: 3 | RNVC: 1
02-99-0554: RNCC: 5 | RNVC: 1
1040: RNCC: 5 | RNVC: 2

28 Oct 1972

5975-00-244-9426
Electrical Cable Nipple

002449426
SCA14702: RNCC: 3 | RNVC: 2
658-83: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2634
Electrical Conduit Bushing

002402634
115: RNCC: 3 | RNVC: 2
SP1460: RNCC: 3 | RNVC: 2
BUC50: RNCC: 3 | RNVC: 2
1460: RNCC: 5 | RNVC: 2
1460: RNCC: 5 | RNVC: 2
1272: RNCC: 5 | RNVC: 2
301: RNCC: 5 | RNVC: 9
3-50: RNCC: 5 | RNVC: 9
CB-51: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-487-5381
Stuffing Tube Packing Nut

004875381
JH3079: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-189-4710
Cable Marker Sleeve

001894710
0N057432-32: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-045-1703
Electrical Equipment Rack

000451703
1783180-7: RNCC: 3 | RNVC: 9

6 May 1967

5975-00-504-9001
Conduit Outlet Cover

005049001
SA342: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-504-9274
Electrical Equipment Rack Base

005049274
MT62ARC5: RNCC: 3 | RNVC: 2
23155: RNCC: 5 | RNVC: 2
46085: RNCC: 5 | RNVC: 2
FT279A: RNCC: 5 | RNVC: 2
5694: RNCC: 5 | RNVC: 9
5694-2A: RNCC: 5 | RNVC: 9
6546-4B: RNCC: 5 | RNVC: 9
7978-3B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-008-0636
Grounding Plate

000080636
546-7050-002: RNCC: 3 | RNVC: 2

16 Jul 1972

5975-00-007-9010
Electrical Equipment Mounting Base

000079010
35-29218-2: RNCC: 3 | RNVC: 2

14 Jul 1972

5975-00-411-1689
Chassis Base

004111689
51872: RNCC: 3 | RNVC: 2

15 Aug 1969

5975-00-476-8452
Electrical Equipment Mounting Base

004768452
95635-1: RNCC: 3 | RNVC: 2

10 Jun 1971

5975-00-135-7892
Blank Panel

001357892
32-81608-1: RNCC: 3 | RNVC: 2

8 Jan 1969

5975-00-875-4082
Strain Electrical Conductor Clamp

008754082
80471: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-378-4714
Guy Kit

003784714
R78-5: RNCC: 3 | RNVC: 2
MK99U: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-223-9488
Junction Box

002239488
GC1265-14: RNCC: 3 | RNVC: 2
SC-D-40738: RNCC: 3 | RNVC: 2
GC1265-14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-379-2388
Universal Strandlink

003792388
5040: RNCC: 3 | RNVC: 2
5040: RNCC: 5 | RNVC: 9

21 Mar 1974

5975-00-131-1583
Electrical Conduit Adapter

001311583
REC604: RNCC: 3 | RNVC: 2

10 Jan 1969

5975-00-038-1754
Junction Box

000381754
EE143: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-2813
Electrical Box Connector

000382813
45929: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-783-3674
Clamp

007833674
C336009002: RNCC: 3 | RNVC: 2
950468-1: RNCC: 5 | RNVC: 2
C336009-002: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-007-0650
Electrical Conduit Adapter

000070650
533405-306: RNCC: 3 | RNVC: 9
S694-4-20-100R: RNCC: 5 | RNVC: 9
2221-20100-101: RNCC: 5 | RNVC: 9

1 Feb 2001

5975-00-405-8787
Junction Box Cover

004058787
0N047141-1: RNCC: 3 | RNVC: 2

14 Apr 1971

5975-00-772-5668
Blank Panel

007725668
50-344544: RNCC: 3 | RNVC: 2
50-344544: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-237-3147
Metallic Raceway

002373147
6660G: RNCC: 3 | RNVC: 2

4 Nov 1970

5975-00-366-5562
Cable Marker Sleeve

003665562
446712-25: RNCC: 3 | RNVC: 2

22 Feb 1974

5975-00-216-4758
Electrical Equipment Mounting Base

002164758
M1585010: RNCC: 3 | RNVC: 2
M1585010: RNCC: 5 | RNVC: 9

25 Apr 1973

5975-00-845-2088
Electrical Equipment Cabinet

008452088
144: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-448-3153
Flexible Metal Conduit

004483153
5116427-22: RNCC: 3 | RNVC: 2
5116427-24: RNCC: 5 | RNVC: 2
5116427-24: RNCC: 5 | RNVC: 9
5116427-22: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-194-6846
Electrical Equipment Rack

001946846
ML7761671G2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-197-6515
Electrical Equipment Rack Base

001976515
SCD6441: RNCC: 3 | RNVC: 2
FT284: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-004-9431
Electrical Grounding Plate

000049431
666230-128: RNCC: 3 | RNVC: 2

14 Jun 1972

5975-00-215-4289
Junction Box

002154289
9000S8106-73143: RNCC: 3 | RNVC: 2
9000S8106-73143ALT2: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-737-8265
Cap Asy

007378265
1089604: RNCC: 3 | RNVC: 2
7378265: RNCC: 5 | RNVC: 9

1 Jan 1963

Load More Results