What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 174 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 174 of 176

5975-01-217-2516
Electrical-Electronic Equipment Chassis

012172516
2113343-102: RNCC: 3 | RNVC: 2

23 Sep 1985

5975-01-339-4797
Rack Adapter Kit

013394797
802140: RNCC: 3 | RNVC: 2

23 May 1991

5975-01-340-1158
Electrical Box Connector

013401158
74501-3: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2475
Electrical Equipment Cabinet

013402475
11453347: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-342-1006
Cable Strain Relief Bushing

013421006
H1401W: RNCC: 3 | RNVC: 9

16 Jul 1991

5975-01-189-0291
Electrical Components Tie Down Strap

011890291
TY4: RNCC: 3 | RNVC: 2

11 Sep 1984

5975-01-218-7068
Electrical-Electronic Equipment Chassis

012187068
4033180-952: RNCC: 3 | RNVC: 2
4033180-952: RNCC: 5 | RNVC: 1

17 Oct 1985

5975-01-338-5055
Electrical-Electronic Equipment Chassis

013385055
617-8762-009: RNCC: 3 | RNVC: 2

4 May 1991

5975-01-339-4316
Left Hand Support

013394316
949973-103: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-338-1614
Electrical-Electronic Equipment Panel

013381614
100-234D108: RNCC: 3 | RNVC: 2
100-234D000: RNCC: 5 | RNVC: 1
100-234D108: RNCC: 5 | RNVC: 2

26 Apr 1991

5975-01-339-7080
Electrical Nonmetallic Conduit Assembly

013397080
172A1376-052: RNCC: 3 | RNVC: 2

28 May 1991

5975-01-098-9133
Electrical Equipment Mounting Base

010989133
MT-3574(XN-1)/USQ-20(V): RNCC: 3 | RNVC: 2

9 Aug 1980

5975-01-100-4997
Electrical Components Tie Down Strap

011004997
21400: RNCC: 3 | RNVC: 2
21400C: RNCC: 5 | RNVC: 9

7 Sep 1980

5975-00-813-8660
Electrical Wall Plate

008138660
360: RNCC: 3 | RNVC: 2
70-1579: RNCC: 5 | RNVC: 2

23 Apr 1972

5975-00-427-1063
Electrical Cable Nipple

004271063
T354: RNCC: 3 | RNVC: 2
4684: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-335-6560
Blank Panel

013356560
86411656-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-086-6657
Electrical Components Tie Down Strap

010866657
10S300-2-97: RNCC: 3 | RNVC: 9
10S300-2-97: RNCC: C | RNVC: 1

1 Dec 1979

5975-00-326-9049
Electrical Equipment Rack

003269049
1783180-122: RNCC: 3 | RNVC: 2

24 Nov 1973

5975-01-333-7089
Electrical-Electronic Equipment Chassis

013337089
86421461-1: RNCC: 3 | RNVC: 2

8 Feb 1991

5975-01-333-7502
Electrical Equipment Leg

013337502
M3784-7001: RNCC: 3 | RNVC: 2

8 Feb 1991

5975-01-144-5979
Junction Box Assembly

011445979
12311562: RNCC: 3 | RNVC: 2

27 Dec 1982

5975-00-781-1738
Conduit Outlet Cover

007811738
WR150: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-838-0443
Ground Rod

008380443
2665: RNCC: 3 | RNVC: 9
9062882: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-132-5362
Cable Marker Sleeve

011325362
1086864P3: RNCC: 3 | RNVC: 2

30 May 1982

5975-01-132-6171
Wire Marker Book

011326171
PCMB10: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-01-134-1780
Mounting Plate

011341780
A-66845: RNCC: 3 | RNVC: 2

28 Jun 1982

5975-00-783-8253
Electrical Conduit Coupling Nut

007838253
45024-305: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-426-0657
Electrical Conduit Union

004260657
UNF205SA: RNCC: 3 | RNVC: 2

14 Apr 1971

5975-01-126-6163
Electrical Components Tie Down Strap

011266163
TY-P25M-0: RNCC: 3 | RNVC: 2

14 Feb 1982

5975-00-806-1759
Servocylinder Mounting Plate

008061759
68491: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-015-6812
Electrical Cable Nipple

010156812
40N171-2S: RNCC: 3 | RNVC: 9
40N171-2S: RNCC: C | RNVC: 1

25 Jan 1976

5975-01-122-9259
Electrical Components Tie Down Strap

011229259
10S300-2-134: RNCC: 3 | RNVC: 9
10S300-2-134: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-110-0810
Conduit Assy

011100810
1310-0001-5: RNCC: 3 | RNVC: 2
1310-0001-5: RNCC: 3 | RNVC: 9

26 Mar 1981

5975-01-118-7998
Waveguide Cover

011187998
311493-2: RNCC: 3 | RNVC: 2
311493-2: RNCC: 5 | RNVC: 9
311493-2: RNCC: 8 | RNVC: 2

12 Sep 1981

5975-00-951-2495
Electrical Equipment Rack

009512495
MT2846APQ72: RNCC: 3 | RNVC: 1
700R846G01: RNCC: 5 | RNVC: 2
700R846G01: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-008-9954
Electrical-Electronic Equipment Chassis

010089954
G354629: RNCC: 3 | RNVC: 9
G354629: RNCC: 5 | RNVC: 9
G354629: RNCC: C | RNVC: 1

1 Sep 1975

5975-01-031-7099
Cable Splicers Kit

010317099
MPU8: RNCC: 3 | RNVC: 9

1 Dec 1976

5975-01-036-3061
Blank Panel

010363061
08600-60016: RNCC: 3 | RNVC: 2
08600-60016: RNCC: 3 | RNVC: 9
08600-60016: RNCC: 5 | RNVC: 9

24 Feb 1977

5975-00-900-5000
Electrical Equipment Cabinet

009005000
MK200: RNCC: 3 | RNVC: 9
CY2556GT: RNCC: 5 | RNVC: 2
FR127ADWG6254-1AS2528AND6254-4: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-939-5616
Electrical Wall Plate

009395616
97181: RNCC: 3 | RNVC: 9

22 Nov 1965

5975-00-740-2708
Cable Collar

007402708
7402708: RNCC: 3 | RNVC: 2

20 Jun 1969

5975-00-956-3890
Electrical-Electronic Equipment Chassis

009563890
101004: RNCC: 3 | RNVC: 2
5800332-1920-000: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-107-8151
Circuit Board Support

011078151
LCBS-6N: RNCC: 3 | RNVC: 9

13 Feb 1981

5975-00-935-3942
Electrical Components Tie Down Strap

009353942
MS3367-1-6: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
MS3367-1-6: RNCC: 5 | RNVC: 2
MS3367-1-6: RNCC: 5 | RNVC: 2

22 Nov 1967

5975-01-090-7480
Electrical Components Tie Down Strap

010907480
SST4HD30: RNCC: 3 | RNVC: 2

23 Feb 1980

5975-00-845-2092
Electrical Equipment Cabinet

008452092
135: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-830-6074
Electrical Components Tie Down Strap

008306074
WL-725: RNCC: 3 | RNVC: 2
8846215: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-940-0472
Electrical Conduit Coupling Nut

009400472
67181: RNCC: 3 | RNVC: 2
67181: RNCC: 5 | RNVC: 9

16 Nov 1965

5975-00-989-2027
Electrical Equipment Rack

009892027
EK313A: RNCC: 3 | RNVC: 2
CR1774HG: RNCC: 5 | RNVC: 2
ER223A: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-068-6027
Boot

010686027
6P0382: RNCC: 3 | RNVC: 2

30 Nov 1978

5975-01-071-5594
Electrical Components Tie Down Strap

010715594
TY-29MX: RNCC: 3 | RNVC: 2
TY29MX: RNCC: 5 | RNVC: 2
TY29MX: RNCC: 5 | RNVC: 9

9 Feb 1979

5975-01-067-1411
Mounting Tray

010671411
151263: RNCC: 3 | RNVC: 2
985.95.10.070: RNCC: 5 | RNVC: 2

25 Oct 1978

5975-01-047-7597
Electrical Canister

010477597
72A097213-1013: RNCC: 3 | RNVC: 2

13 Sep 1977

5975-01-055-6456
Electrical Conduit

010556456
CRN2646-8: RNCC: 3 | RNVC: 2

9 Feb 1978

5975-01-055-9754
Electrical Conductor Bushing

010559754
620-1643: RNCC: 3 | RNVC: 9

15 Feb 1978

5975-00-985-6315
Electrical Cable Tray

009856315
6A12070: RNCC: 3 | RNVC: 2

14 May 1972

5975-01-030-4841
Electrical Wall Plate

010304841
7423: RNCC: 3 | RNVC: 2

7 Nov 1976

5975-01-034-1638
Electrical-Electronic Equipment Chassis

010341638
G354592: RNCC: 3 | RNVC: 2
G354592: RNCC: 3 | RNVC: 9

20 Jan 1977

5975-01-044-6729
Electrical Components Tie Down Strap

010446729
35382: RNCC: 1 | RNVC: 2
SSC2S-S6: RNCC: 3 | RNVC: 2
401626: RNCC: 5 | RNVC: 2
SSC2S-S6: RNCC: 5 | RNVC: 2

18 Jul 1977

5975-01-019-0464
Electrical Conductor Bushing

010190464
SB-750-10WHITE: RNCC: 3 | RNVC: 2
03050050-012: RNCC: 5 | RNVC: 2
03050050-012: RNCC: 5 | RNVC: 9

14 Apr 1976

5975-00-833-6983
Cable Clamp Handle

008336983
0N002704: RNCC: 3 | RNVC: 2

8 Sep 1967

5975-01-036-9574
Electrical Components Tie Down Strap

010369574
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-4-4: RNCC: 3 | RNVC: 2
MS3367-4-4: RNCC: 3 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 1
MIL-S-23190: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MS3367-4-4: RNCC: 5 | RNVC: 9

10 Mar 1977

5975-01-024-8486
Electrical Box Connector

010248486
2257: RNCC: 3 | RNVC: 2
CS72101: RNCC: 5 | RNVC: 1
2257: RNCC: 5 | RNVC: 2

21 Jul 1976

5975-01-058-7584
Electrical Equipment Rack

010587584
0N226590: RNCC: 3 | RNVC: 2

1 Apr 1978

5975-00-872-0756
Outlet Assembly

008720756
G202S2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-056-2118
Electrical-Electronic Equipment Chassis

010562118
159953-01: RNCC: 3 | RNVC: 2

18 Feb 1978

5975-01-047-7595
Electrical Canister

010477595
72A097023-1003: RNCC: 3 | RNVC: 2

13 Sep 1977

5975-01-047-7596
Electrical Canister

010477596
72A097213-1009: RNCC: 3 | RNVC: 2

13 Sep 1977

5975-01-132-9399
Box Electric

011329399
364-40123-000: RNCC: 3 | RNVC: 2

8 Jun 1982

5975-01-136-4146
Blank Panel

011364146
74A802615-1025: RNCC: 3 | RNVC: 2
74A802615-1015: RNCC: 5 | RNVC: 2
74A802615-1001: RNCC: 5 | RNVC: 2

8 Aug 1982

5975-00-879-5754
Electrical Cable Nipple

008795754
8140000135: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-879-4932
Junction Box

008794932
5732: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-121-6199
Blank Panel

011216199
75-0127-13: RNCC: 3 | RNVC: 2

6 Nov 1981

5975-01-079-4382
Electrical-Electronic Equipment Chassis

010794382
326466-1: RNCC: 3 | RNVC: 2
842435-1: RNCC: 5 | RNVC: 9
326466-1: RNCC: 5 | RNVC: 9
326466-1: RNCC: 8 | RNVC: 2

6 Jul 1979

5975-01-136-8287
Cable Marker Sleeve

011368287
1086864P2: RNCC: 3 | RNVC: 2

16 Aug 1982

5975-00-973-9564
Electrical Conduit Bushing

009739564
B100: RNCC: 3 | RNVC: 2
IBC100: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-982-5736
Electrical Wall Plate

009825736
91111: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-138-5195
Electrical Grounding Plate

011385195
0N517049: RNCC: 3 | RNVC: 2

16 Sep 1982

5975-01-139-3409
Cable Marker Sleeve

011393409
TMS-SCE-1/8-2.0-S1-9: RNCC: 3 | RNVC: 1
215511T117: RNCC: 5 | RNVC: 2
RNF-100-1/8X13/16 WHITE: RNCC: 5 | RNVC: 9
215511T117: RNCC: 7 | RNVC: 2

29 Sep 1982

5975-01-079-2544
Electrical Equipment Mounting Base

010792544
162946-01: RNCC: 3 | RNVC: 2

30 Jun 1979

5975-00-960-1084
Electrical Box Connector

009601084
CGB3816: RNCC: 3 | RNVC: 2
SR384: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-813-8809
Electrical Cable Nipple

008138809
389: RNCC: 3 | RNVC: 1
389: RNCC: 5 | RNVC: 9

23 Apr 1972

5975-00-711-8805
Switch Cap

007118805
B-41749: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-713-8181
Cable Strap

007138181
TY35: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-797-2864
Electrical Equipment Rack

007972864
CE187194: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-669-9017
Electrical Cable Protector

006699017
134040: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-809-1000
Electrical-Electronic Equipment Chassis

008091000
10549047: RNCC: 3 | RNVC: 2

8 May 1968

5975-00-669-9348
Electrical Conduit Ferrule

006699348
S1110750-16: RNCC: 3 | RNVC: 2
11-1B16: RNCC: 3 | RNVC: 2
S1110750-16: RNCC: 5 | RNVC: 9
11-1B16: RNCC: 5 | RNVC: 9
019-1561-070: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-665-0817
Electrical Cable Nipple

006650817
5913: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-752-4922
Electrical Conduit Ferrule-Nut Coupling

007524922
7524922: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-519-9547
Electrical-Electronic Equipment Chassis

005199547
8824569-501: RNCC: 3 | RNVC: 9
8824569-501: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-524-5430
Cover Controller Bo

005245430
CE88041: RNCC: 3 | RNVC: 2

29 Oct 1969

5975-00-520-1217
Cable Clamp

005201217
666164-415: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-758-6000
Underground Cable Rack

007586000
J5125: RNCC: 3 | RNVC: 2

6 Mar 1968

5975-00-579-5024
Electrical Conduit Locknut

005795024
AN3066-6: RNCC: 4 | RNVC: 1
10134298: RNCC: 6 | RNVC: 9

1 Jan 1960

5975-00-556-7814
Flexible Metal Conduit Assembly

005567814
SM-B-71883: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-740-1266
Electrical Equipment Cabinet

007401266
708522-2: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-441-1610
Electrical Components Tie Down Strap

004411610
2829-75-3: RNCC: 3 | RNVC: 9
3571-0753: RNCC: 5 | RNVC: 2
135105-003: RNCC: 5 | RNVC: 2
10092235-3: RNCC: 5 | RNVC: 2
214-1176P3: RNCC: 5 | RNVC: 2
3571-0753: RNCC: 5 | RNVC: 9
113251: RNCC: 5 | RNVC: 9
2829-72-3: RNCC: 5 | RNVC: 9
214-1176P3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-425-4072
Junction Box Cover

004254072
0N047141-2: RNCC: 3 | RNVC: 2

21 Apr 1971

5975-00-596-2119
Cover-Round

005962119
E7260: RNCC: 3 | RNVC: 2
04050452045094: RNCC: 5 | RNVC: 2

8 Jan 1975

5975-00-636-1988
Flexible Metal Conduit

006361988
S105-4864: RNCC: 3 | RNVC: 2
10-90271-413: RNCC: 3 | RNVC: 9
10-70912-48: RNCC: 5 | RNVC: 9
10-70912-48: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-636-1976
Electrical Conduit Bushing

006361976
810M10009: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-630-4520
Holder Assembly

006304520
3304844REVBPC14: RNCC: 3 | RNVC: 2
41102: RNCC: 3 | RNVC: 9
0977REVBPC14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-644-0236
Electrical Cable Protector

006440236
E1028-73-10: RNCC: 3 | RNVC: 2
33690: RNCC: 5 | RNVC: 2
26038: RNCC: 5 | RNVC: 2
E1028-73-10: RNCC: 5 | RNVC: 2
33690: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-627-2509
Ible Fle Coupling

006272509
1769-1007P1: RNCC: 3 | RNVC: 2
T: RNCC: 5 | RNVC: 2
TYPET: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-626-5882
Housing Kit

006265882
621-8533-002: RNCC: 3 | RNVC: 2
6501022: RNCC: 5 | RNVC: 2
6501022: RNCC: 5 | RNVC: 9

5 Mar 1975

5975-00-687-1410
Switch Terminal Cover

006871410
LA8566-12: RNCC: 3 | RNVC: 9
LA8566-12: RNCC: 5 | RNVC: 2
9018578: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-545-1599
Electrical Conduit Elbow

005451599
213029-1: RNCC: 3 | RNVC: 2
3355-2: RNCC: 5 | RNVC: 2
3355-2: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-669-9136
Junction Box

006699136
236-107: RNCC: 3 | RNVC: 9
236-107: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-521-2035
Flexible Metal Conduit Assembly

005212035
5143436-10: RNCC: 3 | RNVC: 2
5143436-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-549-1715
Electrical Grounding Plate

005491715
715339-18: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-521-2045
Flexible Metal Conduit Assembly

005212045
5143436-20: RNCC: 3 | RNVC: 2
5143436-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-2049
Flexible Metal Conduit Assembly

005212049
5143436-7: RNCC: 3 | RNVC: 2
5143436-7: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-534-3537
Cable Marker Sleeve

005343537
5343537: RNCC: 3 | RNVC: 2
5343537: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-087-3789
Electrical Equipment Cabinet

010873789
171D008: RNCC: 3 | RNVC: 2

16 Dec 1979

5975-01-085-8483
Rotating Pedestal *

010858483
SRGL2-5600: RNCC: 3 | RNVC: 2
KM-123: RNCC: 5 | RNVC: 2
FL-1112-16: RNCC: 5 | RNVC: 2

17 Nov 1979

5975-00-646-8887
Electrical Equipment Rack

006468887
464511-150: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-158-4036
Interconnecting Box

011584036
5053024-1: RNCC: 3 | RNVC: 2
5053024-1: RNCC: 5 | RNVC: 2

22 Jul 1983

5975-01-158-4046
Electrical-Electronic Equipment Panel

011584046
5051723-1: RNCC: 3 | RNVC: 2

22 Jul 1983

5975-01-052-3050
Support Collar

010523050
24871-0002: RNCC: 3 | RNVC: 2
601544: RNCC: 5 | RNVC: 9

12 Dec 1977

5975-01-053-7577
Chassis Base

010537577
635R633G01: RNCC: 3 | RNVC: 2

10 Jan 1978

5975-00-498-9357
Electrical Conductor Bushing

004989357
QP0127: RNCC: 3 | RNVC: 2
X44-280: RNCC: 5 | RNVC: 9
236: RNCC: 5 | RNVC: 9
236: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-884-6663
Cable Strain Relief Bushing

008846663
001-24598PC23: RNCC: 3 | RNVC: 1
SR6P3-4: RNCC: 5 | RNVC: 1

29 Nov 1967

5975-01-049-4517
Electrical Box Connector

010494517
5243AL: RNCC: 3 | RNVC: 2

19 Oct 1977

5975-01-108-5460
Electrical Equipment Mounting Base

011085460
149-0033-000: RNCC: 3 | RNVC: 9

1 Mar 1981

5975-00-537-5031
Electrical Equipment Shelf

005375031
82744982Z: RNCC: 3 | RNVC: 2
MT1582GP: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-098-2874
Electrical Box Connector

000982874
187170: RNCC: 3 | RNVC: 2
18770: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-760-5317
Flexible Metal Conduit

007605317
G340: RNCC: 3 | RNVC: 2

31 Oct 1969

5975-00-845-2093
Electrical Equipment Cabinet

008452093
108: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-497-1754
Flexible Metal Conduit

004971754
8800-173744: RNCC: 3 | RNVC: 2
187-0250: RNCC: 5 | RNVC: 9
9734-4: RNCC: 5 | RNVC: 9
9734-4: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-090-9061
Electrical Box Connector

000909061
5265604: RNCC: 3 | RNVC: 2
5934536: RNCC: 5 | RNVC: 2
5934536: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-632-4323
High Voltage Grounding Rod

006324323
7488977G2: RNCC: 3 | RNVC: 9
7488977G2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-090-3688
Shock Mount

000903688
SH1003: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-3982
Electrical Conductor Bushing

002803982
SCB83062: RNCC: 3 | RNVC: 2
PB3709B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9521
Electrical Conduit Coupling Nut

002809521
4-0251: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-055-6459
Electrical Conduit

010556459
CRN2646-7: RNCC: 3 | RNVC: 2

9 Feb 1978

5975-01-232-6636
Junction Box

012326636
10182779: RNCC: 3 | RNVC: 2
10182779: RNCC: 5 | RNVC: 1

19 May 1986

5975-01-233-3204
Electrical Components Tie Down Strap

012333204
418212-1: RNCC: 3 | RNVC: 2

29 May 1986

5975-00-322-4192
Blank Panel

003224192
PL0152: RNCC: 3 | RNVC: 2
0152: RNCC: 5 | RNVC: 2
SCD204123: RNCC: 5 | RNVC: 2

21 Nov 1969

5975-01-067-1413
Table Assembly

010671413
666193-978: RNCC: 3 | RNVC: 2

25 Oct 1978

5975-01-228-5134
Electrical Conduit Nipple

012285134
B305-D12W: RNCC: 3 | RNVC: 2

18 Mar 1986

5975-01-083-9522
Electrical-Electronic Equipment Chassis

010839522
119277: RNCC: 3 | RNVC: 2
119277: RNCC: 5 | RNVC: 9

5 Oct 1979

5975-00-076-1095
Electrical-Electronic Equipment Chassis

000761095
1511229-901: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-751-8968
Ground Rod

007518968
B11076-5-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-752-4923
Electrical Conduit Ferrule-Nut Coupling

007524923
7524923: RNCC: 3 | RNVC: 2
0-37374-281: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-025-1613
Junction Box

010251613
1448414: RNCC: 3 | RNVC: 2

27 Jul 1976

5975-01-224-8671
Electrical Equipment Rack

012248671
16C0501-5: RNCC: 3 | RNVC: 2

24 Jan 1986

5975-01-082-3210
Electrical-Electronic Equipment Chassis

010823210
822581-2: RNCC: 3 | RNVC: 2
822581-2: RNCC: 8 | RNVC: 2

31 Aug 1979

5975-00-296-9432
Electrical Box Connector

002969432
304V: RNCC: 3 | RNVC: 2
SMB210005-1: RNCC: 3 | RNVC: 2
304: RNCC: 5 | RNVC: 2
SP5304: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-064-6411
Electrical Box Connector

010646411
TW200-S: RNCC: 3 | RNVC: 2
1025-S: RNCC: 5 | RNVC: 9
20305: RNCC: 5 | RNVC: 9
033794-0006: RNCC: 7 | RNVC: 2

29 Aug 1978

5975-01-064-0370
Junction Box

010640370
J2514SPS48V: RNCC: 3 | RNVC: 2

16 Aug 1978

5975-00-469-1443
Rigid Metal Conduit

004691443
32-75035-39: RNCC: 3 | RNVC: 2

3 Jun 1974

5975-00-309-5125
Plate

003095125
MX1468G: RNCC: 3 | RNVC: 2
SCDC180621: RNCC: 3 | RNVC: 2
MX1468G: RNCC: 3 | RNVC: 2
SC-DL-180621: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-755-3137
Electrical Equipment Mounting Base

007553137
90115-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-826-3293
Electrical-Electronic Equipment Chassis

008263293
512770-1: RNCC: 3 | RNVC: 2
512770-1: RNCC: 5 | RNVC: 9
512770-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-827-0481
Electrical Box Connector

008270481
LS966-8: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-074-9156
Electrical Cable Nipple

010749156
11083: RNCC: 3 | RNVC: 2
3558038: RNCC: 5 | RNVC: 2
3198-8508-00: RNCC: 5 | RNVC: 2
S1458: RNCC: 5 | RNVC: 2
3558038: RNCC: 5 | RNVC: 9
3198-8508-00: RNCC: 5 | RNVC: 9

10 Apr 1979

5975-01-049-6622
Electrical Equipment Rack

010496622
CR120X36A: RNCC: 3 | RNVC: 9

23 Oct 1977

5975-00-091-9128
Electrical Conductor Bushing

000919128
191-465: RNCC: 3 | RNVC: 2

29 May 1968

5975-00-301-5715
Cable Clamp

003015715
507C: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-213-7389
Electronic Junction Rack

012137389
591628-1: RNCC: 3 | RNVC: 2
MRTB-10-239: RNCC: 5 | RNVC: 9
11437559-1: RNCC: 7 | RNVC: 2

29 Jul 1985

5975-00-534-3501
Cable Marker Sleeve

005343501
5343501: RNCC: 3 | RNVC: 2
5343501: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-092-6762
Shelf Dts Control

010926762
619-6051-001: RNCC: 3 | RNVC: 2

31 Mar 1980

5975-01-068-7227
Regulator Handle

010687227
607-7693-002: RNCC: 3 | RNVC: 2

1 Dec 1978

5975-01-089-4600
Electrical-Electronic Equipment Panel

010894600
0N507983-1: RNCC: 3 | RNVC: 2

2 Feb 1980

5975-01-095-4515
Frame

010954515
319056-3: RNCC: 3 | RNVC: 2
319056-3: RNCC: 8 | RNVC: 2

30 May 1980

5975-00-961-1416
Wir Molded Junction

009611416
2983495: RNCC: 3 | RNVC: 2
1603669: RNCC: 5 | RNVC: 9
2983495: RNCC: 5 | RNVC: 9
2983495: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-928-5989
Splicing Kit

009285989
2654-01: RNCC: 3 | RNVC: 2
SS8A: RNCC: 5 | RNVC: 9
2654: RNCC: 5 | RNVC: 9

24 Aug 1966

5975-00-862-2495
Cable Hanger

008622495
CE93526: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-076-5894
Electrical Components Tie Down Strap

010765894
TY24MX0: RNCC: 3 | RNVC: 2

8 May 1979

5975-01-103-5206
Solenoid Case

011035206
1010205-3: RNCC: 3 | RNVC: 2
1010205-3: RNCC: 3 | RNVC: 9

13 Nov 1980

5975-00-257-5616
Electrical Conductor Bushing

002575616
K7112780REV1: RNCC: 3 | RNVC: 2
B654032: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-553-6584
Electrical Conduit Adapter

005536584
60B110512-6: RNCC: 3 | RNVC: 9
60B110-12-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-208-9348
Telescopic Slide

012089348
990124-R: RNCC: 3 | RNVC: 2
1672255-3: RNCC: 7 | RNVC: 2

21 May 1985

5975-01-070-4585
Electrical Cable Protector

010704585
16E1388-9: RNCC: 3 | RNVC: 2

12 Jan 1979

5975-00-225-7352
Electrical Conductor Bushing

002257352
PEM16: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-521-1694
Electrical Conduit Elbow

005211694
1042935: RNCC: 3 | RNVC: 2
1118628: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-522-5562
Flexible Metal Conduit Assembly

005225562
5334403-624: RNCC: 3 | RNVC: 2
5334403-624: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5553
Flexible Metal Conduit Assembly

005225553
5334403-514: RNCC: 3 | RNVC: 2
5334403-514: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-523-5642
Electrical Equipment Mounting Base

005235642
9893896G2: RNCC: 3 | RNVC: 2
9893896G2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-583-2938
Electrical Conductor Bushing

005832938
A99A18: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-590-0261
Electrical Equipment Mounting Base

005900261
PS45291: RNCC: 3 | RNVC: 2
PS45291: RNCC: 5 | RNVC: 2
PS45291: RNCC: 5 | RNVC: 2
K102: RNCC: 5 | RNVC: 9
PS45291: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-070-7411
Metallic Raceway

010707411
281620-0003: RNCC: 3 | RNVC: 2

18 Jan 1979

5975-01-048-8920
Electrical Equipment Rack

010488920
MIS-30526/1TY1: RNCC: 3 | RNVC: 2
RTM506: RNCC: 5 | RNVC: 1

7 Oct 1977

5975-00-374-4742
Electrical Conduit Ferrule

003744742
K1077: RNCC: 3 | RNVC: 9
J1077: RNCC: 5 | RNVC: 9
K1077: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-374-5245
Hold-Down Plate

003745245
30266: RNCC: 3 | RNVC: 2
6050F: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-066-9297
Electrical-Electronic Equipment Chassis

010669297
626334: RNCC: 3 | RNVC: 2

21 Oct 1978

5975-01-068-3549
Cable Clamp

010683549
768-7354-001: RNCC: 3 | RNVC: 2

22 Nov 1978

5975-00-388-9054
Cable Marker Sleeve

003889054
AN4028-5-10: RNCC: 2 | RNVC: 2

1 Jan 1961

5975-00-503-3447
Electrical Equipment Rack

005033447
S0D63782ANDGS55143: RNCC: 3 | RNVC: 2
S0D63782ANDGS55143: RNCC: 5 | RNVC: 9
S0D63782ANDGS55143: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-037-5143
Conduit Assembly

010375143
11553769: RNCC: 1 | RNVC: 2
CRN2505: RNCC: 3 | RNVC: 2

19 Mar 1977

5975-00-777-5256
Electrical Conduit Elbow

007775256
FFL200: RNCC: 3 | RNVC: 2
347518-0003: RNCC: 5 | RNVC: 2

20 Mar 1968

5975-01-186-7975
Electrical Equipment Cabinet

011867975
0N090290-4: RNCC: 3 | RNVC: 2

15 Aug 1984

5975-00-368-4679
Cable Marker Sleeve

003684679
446712-15: RNCC: 3 | RNVC: 2

27 Feb 1974

5975-00-369-6781
Electrical Equipment Mounting Base

003696781
500-9356-003: RNCC: 3 | RNVC: 2
500-9356-00C: RNCC: 3 | RNVC: 2
MT-283/ART-13: RNCC: 3 | RNVC: 2
2Z6763-283: RNCC: 5 | RNVC: 2
KH3286-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-511-6073
Conduit-Inner Wing

005116073
32-75035-48: RNCC: 3 | RNVC: 2

26 Jul 1974

5975-01-221-0107
Electrical Tie Down Mounting Base

012210107
FRC-1: RNCC: 3 | RNVC: 2

22 Nov 1985

5975-00-978-2531
Electrical-Electronic Equipment Chassis

009782531
2065179-0501: RNCC: 3 | RNVC: 2

7 Oct 1966

5975-00-265-7310
Electrical Conduit Adapter

002657310
RE54: RNCC: 3 | RNVC: 2
RB150-125: RNCC: 5 | RNVC: 2
RB150-125: RNCC: C | RNVC: 1

1 Jan 1961

5975-00-797-2862
Electrical Equipment Rack

007972862
CE187183: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-3039
Electrical Equipment Rack

007973039
CE186993-8: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-2894
Electrical Equipment Rack

007972894
CE186992-9: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-590-5932
Cable Collar

005905932
393691PC91: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-511-8658
Ground Rod

005118658
SCB75592A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-059-9623
Cable Marker Sleeve

010599623
ST650713A19P42: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

4 May 1978

5975-00-982-8642
Blank Panel

009828642
LS4174-9: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-413-4423
Cable Marker Sleeve

004134423
SS7026-15: RNCC: 3 | RNVC: 2
SS7026-15: RNCC: 8 | RNVC: 2

1 May 1970

5975-00-519-8421
Cord Assembly Fastener

005198421
SCB84531: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-575-9446
Electrical Conduit Adapter

005759446
8171437: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-534-3562
Cable Marker Sleeve

005343562
5343562: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-057-9547
Tie Clamp

010579547
938299-1: RNCC: 3 | RNVC: 2

22 Mar 1978

5975-01-058-2206
Cable Marker Sleeve

010582206
ST650713A19P47: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

24 Mar 1978

5975-00-511-4435
Electrical Equipment Rack

005114435
SCD104610: RNCC: 3 | RNVC: 2
4-1004507-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-023-8597
Flexible Metal Conduit Assembly

010238597
10917049: RNCC: 3 | RNVC: 2
156MP56-806: RNCC: 5 | RNVC: 2

27 Jun 1976

5975-01-074-2874
Fanning Strip

010742874
14D48: RNCC: 3 | RNVC: 2

29 Mar 1979

5975-00-369-6803
Electrical Equipment Rack

003696803
MT822ARC27: RNCC: 3 | RNVC: 2
505-0150-004: RNCC: C | RNVC: 1

1 Jan 1961

5975-01-046-1337
Electrical Tie Down Mounting Base

010461337
TC-825: RNCC: 3 | RNVC: 2
717612-9: RNCC: 7 | RNVC: 2

13 Aug 1977

5975-01-071-6897
Test Plug

010716897
4047: RNCC: 3 | RNVC: 9
80-6100-2375-8: RNCC: 5 | RNVC: 2
7000031361: RNCC: C | RNVC: 1

13 Feb 1979

5975-00-411-5963
Electrical Conductor Bushing

004115963
SB1093-13: RNCC: 3 | RNVC: 2
077-003712-040: RNCC: 7 | RNVC: 2

22 Aug 1969

5975-00-501-3279
Junction Box

005013279
GS15764: RNCC: 3 | RNVC: 1
J219AAPS23: RNCC: 5 | RNVC: 1
GS15764: RNCC: 5 | RNVC: 9
GS15764: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-043-3084
Electrical Components Tie Down Strap

010433084
SST8H30: RNCC: 3 | RNVC: 2

22 Jun 1977

5975-01-039-9583
Drawer Housing

010399583
9170732: RNCC: 3 | RNVC: 2

28 Apr 1977

5975-00-403-7382
Switch Terminal Cover

004037382
824866: RNCC: 3 | RNVC: 2

25 Jul 1969

5975-00-404-3113
Bracing Rod

004043113
C27-2727: RNCC: 3 | RNVC: 9
L2538: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-512-7027
Electrical Equipment Rack

005127027
12398: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-812-5048
Electrical Cable Nipple

008125048
335C667H01: RNCC: 3 | RNVC: 2
335C667H01: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-814-6844
Electrical Cable Nipple

008146844
23FLEXINSULAT0R: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-01-138-1392
Electrical Equipment Cabinet

011381392
622-5744-001: RNCC: 3 | RNVC: 2

8 Sep 1982

5975-00-256-4239
Electrical Box Connector

002564239
SCD23565-1: RNCC: 3 | RNVC: 2
P265456: RNCC: 5 | RNVC: 9
P265456: RNCC: 5 | RNVC: 9
65252: RNCC: 5 | RNVC: 9
SC-D-23565-1: RNCC: 5 | RNVC: 9
P265456: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-766-5614
Strain Electrical Conductor Clamp

007665614
7665614: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-538-4899
Conduit Outlet Cover

005384899
0B180W: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-538-5375
Electrical Equipment Cabinet

005385375
N205958-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-138-3702
Electrical-Electronic Equipment Chassis

011383702
32-062023-01: RNCC: 3 | RNVC: 2
32-062023-01: RNCC: 5 | RNVC: 9

11 Sep 1982

5975-00-450-7227
Electrical-Electronic Equipment Chassis

004507227
668407-1: RNCC: 3 | RNVC: 2

17 Dec 1969

5975-01-052-1376
Electrical Components Tie Down Strap

010521376
PLT2S-C30: RNCC: 3 | RNVC: 2
10134319: RNCC: 6 | RNVC: 9

10 Dec 1977

5975-00-955-1709
Blank Panel

009551709
0N007880: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-394-2534
Ignition Cab Marker

003942534
AN4028-2: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-394-9561
Junction Box

003949561
54151SPL: RNCC: 3 | RNVC: 2

8 Apr 1974

5975-00-281-0545
Flexible Metal Conduit

002810545
101-0750: RNCC: 3 | RNVC: 2
101-0750: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-758-5997
Underground Cable Rack

007585997
J5124: RNCC: 3 | RNVC: 2

6 Mar 1968

5975-01-133-9854
Electrical Equipment Cabinet

011339854
A41794-001: RNCC: 3 | RNVC: 2
CY-7032/ASM-428: RNCC: 5 | RNVC: 2

24 Jun 1982

5975-00-412-5239
Nonmetalic Raceway Conduit

004125239
E2X2: RNCC: 3 | RNVC: 1
128C706DA600A: RNCC: 5 | RNVC: 9
128C706DA600A: RNCC: C | RNVC: 1

1 May 1970

5975-01-047-9358
Panel Assy

010479358
72D085510-2139: RNCC: 3 | RNVC: 2

16 Sep 1977

5975-00-923-1889
Electrical Permuter Cover

009231889
0N008841: RNCC: 3 | RNVC: 2

2 Jan 1966

5975-00-015-7822
Switch Mounting Clamp

000157822
CL-53: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-034-5478
Electrical Equipment Mounting Base

010345478
156089: RNCC: 3 | RNVC: 2

27 Jan 1977

5975-01-124-9966
Electrical Conduit Adapter

011249966
2051H: RNCC: 3 | RNVC: 2

19 Jan 1982

5975-00-406-2123
Brush Contact Cap

004062123
K5861385AA1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-025-6346
Electrical Box Connector

000256346
213029-2: RNCC: 3 | RNVC: 9
3380-1: RNCC: 5 | RNVC: 2
3380-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-657-9507
Flexible Metal Conduit Assembly

006579507
363844-7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-669-9860
Flexible Metal Conduit Assembly

006699860
S14-55-2277: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-669-9678
Electrical Conduit Coupling Nut

006699678
MS25066-12: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-405-3814
Electrical Equipment Rack

004053814
1821-825: RNCC: 3 | RNVC: 2

7 Apr 1971

5975-00-973-9966
Electrical Equipment Rack

009739966
EK316A: RNCC: 3 | RNVC: 2
CR1772HG: RNCC: 5 | RNVC: 9
ER225A: RNCC: 5 | RNVC: 9
9002-092: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-079-4381
Electrical-Electronic Equipment Chassis

010794381
326465-1: RNCC: 3 | RNVC: 2
842438-4: RNCC: 5 | RNVC: 9
326465-1: RNCC: 5 | RNVC: 9
326465-1: RNCC: 8 | RNVC: 2

6 Jul 1979

5975-01-095-5122
Bolt Assembly Bracket

010955122
541-6506-004: RNCC: 3 | RNVC: 2

31 May 1980

5975-00-673-5403
Drawer Divider

006735403
66D867-4-1: RNCC: 3 | RNVC: 2
202C47P2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-970-2636
Rigid Metal Conduit Assembly

009702636
NAF1150-4AB148: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-936-0924
Electrical Equipment Mounting Base

009360924
6088246: RNCC: 3 | RNVC: 2
MT-3791A/ARC-134: RNCC: 5 | RNVC: 2
88246: RNCC: 5 | RNVC: 9

1 Mar 1967

5975-00-008-1492
Conduit Outlet

000081492
VMC1-2: RNCC: 3 | RNVC: 2
2231-0601-001: RNCC: 5 | RNVC: 2

9 Jul 1972

5975-00-631-7201
Electrical Sw Plate

006317201
369A7389: RNCC: 3 | RNVC: 2
369A7389: RNCC: 5 | RNVC: 9

21 Mar 1975

5975-00-394-2536
Ignition Cab Marker

003942536
AN4028-4: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-962-7193
Rigid Metal Conduit

009627193
775159-63: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-104-7028
Electrical Components Tie Down Strap

011047028
PLC1M-S4-10: RNCC: 3 | RNVC: 2
S316: RNCC: 5 | RNVC: 1
S316-4001F: RNCC: 5 | RNVC: 2
S316 4001F: RNCC: 5 | RNVC: 9
S316 4001F: RNCC: C | RNVC: 1

9 Dec 1980

5975-00-659-6531
Interconnecting Box Cover

006596531
7666516: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-240-3195
Blank Panel

002403195
0N089481-2: RNCC: 3 | RNVC: 2

31 Oct 1969

5975-01-055-2025
Electrical Box Connector

010552025
8103-375: RNCC: 3 | RNVC: 9

3 Feb 1978

5975-00-238-6884
Insulator Pin

002386884
J1760: RNCC: 3 | RNVC: 2
PF59: RNCC: 5 | RNVC: 1
J1760: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-885-5560
Cable Clamp

008855560
2205: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-003-2720
Conduit Chase Nipple

000032720
1124-1: RNCC: 3 | RNVC: 9

13 May 1972

5975-00-098-9956
Clamp

000989956
A241792: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-760-7890
Cover Retainer

007607890
7607890: RNCC: 3 | RNVC: 2
BL718309: RNCC: 5 | RNVC: 9
BL718309: RNCC: 5 | RNVC: 9
BL718309: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-067-2359
Electrical Components Tie Down Strap

010672359
4350914001: RNCC: 3 | RNVC: 9
4350914001: RNCC: 5 | RNVC: 9
4350914001: RNCC: 5 | RNVC: 9
4350914001: RNCC: 5 | RNVC: 9
4350914001: RNCC: 5 | RNVC: 9

27 Oct 1978

5975-01-106-6772
Electrical-Electronic Equipment Chassis

011066772
7595858G1: RNCC: 3 | RNVC: 9

22 Jan 1981

5975-01-106-6771
Electrical-Electronic Equipment Chassis

011066771
7595843G1: RNCC: 3 | RNVC: 9

22 Jan 1981

5975-01-069-1381
Flow C Access Cover

010691381
9089261: RNCC: 3 | RNVC: 2

9 Dec 1978

5975-00-241-2417
Junction Box Cover

002412417
ZT84-84ACOG-3-5: RNCC: 3 | RNVC: 2
MT4201-051-010: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-425-4228
Electrical-Electronic Equipment Chassis

004254228
0N149626-2: RNCC: 3 | RNVC: 2

12 Apr 1971

5975-00-244-8946
Crossarm Brace

002448946
P010-10: RNCC: 3 | RNVC: 2

3 Jul 1969

5975-01-009-6162
Electrical Components Tie Down Strap

010096162
3298743: RNCC: 3 | RNVC: 2

13 Sep 1975

5975-00-534-3636
Cable Marker Sleeve

005343636
5343636: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-535-9705
Fanning Strip

005359705
8515363: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-536-3957
Raceway Connector

005363957
5790A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-244-4363
Electrical Conduit Ferrule

002444363
U2164-139A: RNCC: 3 | RNVC: 2
5483: RNCC: 3 | RNVC: 2
E1110-23-1: RNCC: 5 | RNVC: 2
E1110-23-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-854-2657
Electrical-Electronic Equipment Chassis

008542657
1064960G001: RNCC: 3 | RNVC: 2
1064960-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-394-2544
Cable Marker Sleeve

003942544
AN4028-5-2: RNCC: 2 | RNVC: 2

1 Jan 1961

5975-00-113-3490
Interconnecting Box

001133490
6049-2700: RNCC: 3 | RNVC: 2
J2822FRT84V: RNCC: 5 | RNVC: 2

30 Aug 1968

5975-01-094-6943
Electrical Components Tie Down Strap

010946943
MS3367-4-6: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

14 May 1980

5975-01-007-4008
Replacement Blades

010074008
D71401: RNCC: 3 | RNVC: 9
D71401: RNCC: C | RNVC: 1

3 Aug 1975

5975-00-623-0828
Electrical Cable Protector

006230828
926C324P2: RNCC: 3 | RNVC: 2
926C324P2: RNCC: 5 | RNVC: 2
24E1936SPCW1CSTE2: RNCC: 5 | RNVC: 9
101-219CW2: RNCC: 5 | RNVC: 9
1ASWTE1936ACWJTE2: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-866-9550
Raceway Cover

008669550
C4F10114-1: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-373-3882
Motor Brush Spring

003733882
WA900-26: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-501-0571
Electrical Box Connector

005010571
22577: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-109-2145
Flexible Metal Conduit Assembly

001092145
A3399: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-882-1879
Electrical Conduit Coupling Nut

008821879
MDE322108-3: RNCC: 3 | RNVC: 2

10 Nov 1967

5975-01-089-1350
Rack Mounting Kit

010891350
800A: RNCC: 3 | RNVC: 2

26 Jan 1980

5975-00-504-8028
Electrical Cable Nipple

005048028
A22840: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-448-3175
Flexible Metal Conduit Assembly

004483175
C187-0250-0908-5353: RNCC: 3 | RNVC: 2
5143436-1: RNCC: 5 | RNVC: 2
5143436-1: RNCC: 5 | RNVC: 9
C187-0250-0908-5353: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-448-1548
Conduit Fitting

004481548
70893: RNCC: 3 | RNVC: 2
70893: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-883-5806
Electrical Equipment Mounting Base

008835806
54500915: RNCC: 3 | RNVC: 9
MT-1729/ARN-52V: RNCC: 5 | RNVC: 2

15 Nov 1967

5975-01-087-3788
Electrical Equipment Cabinet

010873788
171D007: RNCC: 3 | RNVC: 2

16 Dec 1979

5975-00-856-4758
Electrical-Electronic Equipment Chassis

008564758
SMD415515: RNCC: 3 | RNVC: 2
800084: RNCC: 5 | RNVC: 2
SMB415515ANDSMB415516: RNCC: 5 | RNVC: 2
5820008564758: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-062-4494
Electrical Conduit Elbow

000624494
E1124-317-10: RNCC: 3 | RNVC: 2

17 Jun 1967

5975-01-082-1694
Bushing

010821694
37675449-001: RNCC: 3 | RNVC: 2

27 Aug 1979

5975-00-463-4957
Nonmetallic Raceway

004634957
E2X3LG6: RNCC: 3 | RNVC: 2

10 Sep 1969

5975-00-845-2089
Electrical Equipment Cabinet

008452089
143 BLACK: RNCC: 3 | RNVC: 9
143: RNCC: 5 | RNVC: 1

10 Jun 1978

5975-00-526-4701
Electrical Equipment Rack

005264701
635R644G01: RNCC: 3 | RNVC: 2
635R644G02: RNCC: 5 | RNVC: 2

28 Aug 1974

5975-00-522-5556
Flexible Metal Conduit Assembly

005225556
5334403-528: RNCC: 3 | RNVC: 2
5334403-528: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-007-1054
Special Plate

000071054
761-4885-001: RNCC: 3 | RNVC: 9

1 Feb 2001

5975-00-026-9698
Blank Panel

000269698
PL0013: RNCC: 3 | RNVC: 2
900E0038: RNCC: 5 | RNVC: 9
138686: RNCC: 5 | RNVC: 9
PC1213: RNCC: 5 | RNVC: 9
900E0039: RNCC: 5 | RNVC: 9
125745: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-615-7573
Electrical Box Connector

006157573
KS1946: RNCC: 3 | RNVC: 2
323: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-619-8159
Electrical-Electronic Equipment Chassis

006198159
757-3423-001: RNCC: 3 | RNVC: 2

20 Feb 1975

5975-00-519-4516
Stuffing Tube Packing Nut

005194516
SMB193952: RNCC: 3 | RNVC: 2
SMB193952: RNCC: 5 | RNVC: 2
SMB193952: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-437-0439
Chassis Base

004370439
36958-06: RNCC: 3 | RNVC: 9
36958-06: RNCC: 5 | RNVC: 9
36958-06: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-782-2045
Electrical Cable Protector

007822045
11617272: RNCC: 3 | RNVC: 2
2590007822045: RNCC: 6 | RNVC: 9

21 Feb 1968

5975-00-199-4956
Electrical Equipment Mounting Base

001994956
MT4616ARN84V: RNCC: 3 | RNVC: 2
8010000311-1: RNCC: 5 | RNVC: 9

18 Mar 1973

5975-00-004-9278
Electrical Equipment Rack

000049278
MT4258UYK: RNCC: 3 | RNVC: 2

14 Jun 1972

5975-01-075-6980
Electrical Components Tie Down Strap

010756980
4370174901: RNCC: 3 | RNVC: 9

25 Apr 1979

5975-00-433-4256
Blank Panel

004334256
07035-81000: RNCC: 3 | RNVC: 2

30 Jul 1970

5975-00-864-6613
Electrical Equipment Leg

008646613
626412: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-388-9062
Cable Marker Sleeve

003889062
AN4028-5-9: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-009-2075
Electrical Cable Tray

000092075
6A06010: RNCC: 3 | RNVC: 2

28 Jul 1972

5975-00-701-0897
Flexible Metal Conduit Assembly

007010897
90940-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-852-2191
Electrical Conduit Bend

008522191
WC571TYPE2SIZE3: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-01-071-6581
Electrical Components Tie Down Strap

010716581
PLC2S-S10-CP: RNCC: 3 | RNVC: 2
08484: RNCC: 3 | RNVC: 2
1400-0440: RNCC: 5 | RNVC: 2
1400-0440: RNCC: 5 | RNVC: 9
1400-0440: RNCC: 5 | RNVC: 9
PLC2SS10M: RNCC: C | RNVC: 1

13 Feb 1979

5975-01-072-5915
Special Stuffing Tube

010725915
123268-4: RNCC: 3 | RNVC: 1
123200G1PC26: RNCC: 5 | RNVC: 1

3 Mar 1979

5975-00-845-2090
Electrical Equipment Cabinet

008452090
140: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-709-1756
Missile Relea Mount

007091756
90215: RNCC: 3 | RNVC: 2
90215-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-068-0656
Electrical Grounding Plate

010680656
800952: RNCC: 3 | RNVC: 2

15 Nov 1978

5975-00-692-9433
Flexible Metal Conduit Assembly

006929433
8391640: RNCC: 3 | RNVC: 2
2897E: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-698-0174
Electrical Equipment Cabinet

006980174
SCDL195168: RNCC: 3 | RNVC: 2
SMD195169: RNCC: 3 | RNVC: 2
CY1824G: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-485-9081
Electrical Conduit Coupling Nut

004859081
10-40780-14S: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-913-3167
Electrical Conduit Adapter

009133167
360-S: RNCC: 3 | RNVC: 2
609: RNCC: 3 | RNVC: 2
13309: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-366-7440
Chassis Base

003667440
BPA1523: RNCC: 3 | RNVC: 2

3 Mar 1974

5975-00-792-8506
Flexible Metal Conduit Assembly

007928506
10-86700-2: RNCC: 3 | RNVC: 2
10-86700-2: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-797-2956
Electrical Equipment Rack

007972956
CE186992-14: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-683-2743
Electrical Conduit Union

006832743
8820: RNCC: 3 | RNVC: 2
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-538-0141
Electrical Equipment Cabinet

005380141
CY688U: RNCC: 3 | RNVC: 9
150-120: RNCC: 5 | RNVC: 2
110-006: RNCC: 5 | RNVC: 9
54C13269: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-008-4695
Electrical-Electronic Equipment Chassis

010084695
G390793: RNCC: 3 | RNVC: 9
G390793: RNCC: 5 | RNVC: 9
G390793: RNCC: C | RNVC: 1

25 Aug 1975

5975-00-556-9106
Electrical Equipment Rack Base

005569106
A14G1343: RNCC: 3 | RNVC: 2
MT362AA: RNCC: 5 | RNVC: 1
MT366AA: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-795-7934
Blank Panel

007957934
C192523-3: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-189-4698
Cable Marker Sleeve

001894698
0N057432-22: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4707
Cable Marker Sleeve

001894707
0N057432-29: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4720
Cable Marker Sleeve

001894720
0N057432-43: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-189-4714
Cable Marker Sleeve

001894714
0N057432-36: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-00-360-2162
Interconnecting Cabinet

003602162
000369013: RNCC: 3 | RNVC: 9

6 Feb 1974

5975-01-089-6821
Electrical-Electronic Equipment Panel

010896821
0N507613: RNCC: 3 | RNVC: 2

6 Feb 1980

5975-00-355-5896
Cable Marker Sleeve

003555896
446712-31: RNCC: 3 | RNVC: 2

6 Feb 1974

5975-00-357-4440
Cable Marker Sleeve

003574440
446712-34: RNCC: 3 | RNVC: 2

8 Feb 1974

5975-00-521-2140
Flexible Metal Conduit Assembly

005212140
5334403-680: RNCC: 3 | RNVC: 2
5334403-680: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-539-7300
Electrical Cable Nipple

005397300
568665: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-522-5549
Flexible Metal Conduit Assembly

005225549
5334403-500: RNCC: 3 | RNVC: 2
5334403-500: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-519-5378
Electrical Equipment Cabinet

005195378
R650479-1: RNCC: 3 | RNVC: 2
CY1932GPS: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-978-9078
Electrical Equipment Mounting Base

009789078
2086027-1: RNCC: 3 | RNVC: 2

10 Oct 1966

5975-00-676-2711
Junction Box Assembly

006762711
785135-509: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-521-1988
Flexible Metal Conduit Assembly

005211988
5116427-23: RNCC: 3 | RNVC: 2
5116427-23: RNCC: 5 | RNVC: 9

28 Oct 1966

5975-00-521-2036
Flexible Metal Conduit Assembly

005212036
5143436-11: RNCC: 3 | RNVC: 2
5143436-11: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-2038
Flexible Metal Conduit Assembly

005212038
5143436-13: RNCC: 3 | RNVC: 2
5143436-13: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-2047
Flexible Metal Conduit Assembly

005212047
5143436-4: RNCC: 3 | RNVC: 2
5143436-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-1991
Flexible Metal Conduit Assembly

005211991
5116427-3: RNCC: 3 | RNVC: 2
5116427-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-510-4121
Clamp Assy

005104121
504-7366-002: RNCC: 3 | RNVC: 2
504-7366-002: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-271-5981
Electrical Equipment Mounting Base

002715981
522-0801-005: RNCC: 3 | RNVC: 2
522-0801-005: RNCC: 5 | RNVC: 2

25 Jul 1973

5975-00-333-2473
Electrical Grounding Plate

003332473
66-1091-1: RNCC: 3 | RNVC: 2

16 Dec 1973

5975-00-333-6298
Flexible Metal Conduit Assembly

003336298
5334403-540: RNCC: 3 | RNVC: 2
5334403-540: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-495-4689
Electrical-Electronic Equipment Panel

004954689
0N149665: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-00-341-0338
Electrical Equipment Mounting Base

003410338
174-54046: RNCC: 3 | RNVC: 2
174-54046: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-520-8481
T Junction Box Assy

005208481
177D628-9: RNCC: 3 | RNVC: 2
199C622G2: RNCC: 3 | RNVC: 2
177D628-9: RNCC: 3 | RNVC: 2
199C622G2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-705-7571
Electrical Conduit Elbow

007057571
7057571: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-036-3507
Re Shield-Card Cage

010363507
3124935-01: RNCC: 3 | RNVC: 9
3124935-01: RNCC: 5 | RNVC: 9

25 Feb 1977

5975-00-933-0250
Insulating Sleeve

009330250
530455: RNCC: 3 | RNVC: 9

20 Feb 1967

5975-00-404-5370
Electrical Equipment Mounting Base

004045370
G7256-025: RNCC: 3 | RNVC: 2
MT4037APN190V: RNCC: 5 | RNVC: 1
G7212-025: RNCC: 5 | RNVC: 2
G7256-025: RNCC: 5 | RNVC: 9

8 Aug 1969

5975-00-407-5989
Clamp

004075989
107079: RNCC: 3 | RNVC: 9
107079: RNCC: 5 | RNVC: 9
107079: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-929-9678
Junction Box

009299678
170-40804-3: RNCC: 3 | RNVC: 2
170-40804-3: RNCC: 5 | RNVC: 9

9 Sep 1966

5975-00-335-1833
Spring Retainer

003351833
CE14512: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-284-9058
Electrical Bonding Ring

002849058
476689-2: RNCC: 3 | RNVC: 9
MT157-2: RNCC: 5 | RNVC: 9
AP18738: RNCC: 5 | RNVC: 9
476689-2: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-284-6366
Electrical Cable Nipple

002846366
568182-2: RNCC: 3 | RNVC: 2
568182PT2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-415-6842
Electrical Equipment Mounting Base

004156842
211137-000: RNCC: 3 | RNVC: 2

13 Nov 1970

5975-01-055-0167
Electrical Conductor Bushing

010550167
CA39056-7C22: RNCC: 3 | RNVC: 2

30 Jan 1978

5975-00-504-8979
Junction Box

005048979
5744: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-504-9347
Electrical Conduit Coupling Nut

005049347
118-22B10: RNCC: 3 | RNVC: 2
118-22B10: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-305-7644
Switch Cover

003057644
K63J811REV0PT1: RNCC: 3 | RNVC: 2
CAXH: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-01-047-7588
Panel Assembly

010477588
72D085510-2201: RNCC: 3 | RNVC: 2

13 Sep 1977

5975-00-891-7298
Junction Box

008917298
SR0: RNCC: 3 | RNVC: 2

18 Jan 1967

5975-00-548-3702
Interconnecting Box

005483702
122D143: RNCC: 1 | RNVC: 2
6285: RNCC: 3 | RNVC: 2
5294660: RNCC: 3 | RNVC: 2
122D143: RNCC: 5 | RNVC: 2
M7203: RNCC: 5 | RNVC: 2
M7203: RNCC: 5 | RNVC: 9
11106: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-095-7872
Multi Panel Adapter

010957872
M00-200-611: RNCC: 3 | RNVC: 2

6 Jun 1980

5975-00-256-4238
Electrical Box Connector

002564238
SCC16576GP5: RNCC: 3 | RNVC: 2
TJ130: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-445-9926
Adapter

004459926
1268: RNCC: 3 | RNVC: 2
6-1-1984-9: RNCC: 5 | RNVC: 2
67631: RNCC: 5 | RNVC: 2
1268: RNCC: 5 | RNVC: 9
6-1-1984-9A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-413-4426
Cable Marker Sleeve

004134426
SS7026-18: RNCC: 3 | RNVC: 2
SS7026-18: RNCC: 8 | RNVC: 2

1 May 1970

5975-00-491-0600
Electrical-Electronic Equipment Chassis

004910600
548-8291-004: RNCC: 3 | RNVC: 2

1 Oct 1969

5975-00-930-6925
Electrical Equipment Mounting Base

009306925
SCD425889: RNCC: 3 | RNVC: 2

22 Jun 1966

5975-00-296-0621
Ground Rod

002960621
GR3410: RNCC: 3 | RNVC: 9
MILR11461: RNCC: 4 | RNVC: 1
7510: RNCC: 5 | RNVC: 9
2001E001P3: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-285-0349
Electrical Conduit Elbow

002850349
27032: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-854-2656
Electrical-Electronic Equipment Chassis

008542656
1064311: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-344-0854
Rigid Metal Conduit Assembly

003440854
5-96333-7: RNCC: 3 | RNVC: 2

15 Jan 1974

5975-00-296-3469
Electrical Conductor Bushing

002963469
PM10996: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-513-2416
Electrical Conduit Ferrule

005132416
7501B4: RNCC: 3 | RNVC: 2
S1110751-4: RNCC: 3 | RNVC: 2
11-2B4: RNCC: 5 | RNVC: 2
S1110751-4: RNCC: 5 | RNVC: 9
11-2B4: RNCC: 5 | RNVC: 9
019-1561-140: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-405-3815
Electrical Equipment Rack

004053815
1821-875: RNCC: 3 | RNVC: 2

7 Apr 1971

5975-00-296-1676
Electrical Box Connector

002961676
DB612: RNCC: 3 | RNVC: 2
8019832: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-1813
Electrical Equipment Rack

002961813
46157: RNCC: 3 | RNVC: 2
FT233A: RNCC: 5 | RNVC: 2
7509-2B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-772-2340
Electrical Conduit Elbow

007722340
60-40695-171: RNCC: 3 | RNVC: 2
7722340: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-390-5753
Electrical Equipment Mounting Base

003905753
51B14139: RNCC: 3 | RNVC: 2
MT-556A-A1C: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-219-7505
Electrical Conduit Elbow

002197505
A22185: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-317-5505
Interconnecting Box

003175505
J2DSM99: RNCC: 3 | RNVC: 2

28 Nov 1973

5975-00-404-3481
Electrical Conductor Bushing

004043481
M14-1: RNCC: 3 | RNVC: 2
SC-B-34417: RNCC: 3 | RNVC: 2
M14-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-833-7701
Electrical Conduit Sealing Fitting

008337701
EYD7: RNCC: 3 | RNVC: 2

15 Sep 1967

5975-00-318-1637
Electrical Conductor Bushing

003181637
238: RNCC: 3 | RNVC: 2
0400-0039: RNCC: 5 | RNVC: 2
0400-0039: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-562-4211
Adapter

005624211
A38894: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-3046
Electrical Equipment Mounting Base

002963046
463173-110: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-557-4648
Electrical Box Connector

005574648
SMB185274: RNCC: 3 | RNVC: 2
57639: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-558-2495
Electrical Equipment Mounting Base

005582495
522-2539-003: RNCC: 3 | RNVC: 2
MT2977PRC41: RNCC: 5 | RNVC: 2

15 Oct 1969

5975-00-561-7874
Fanning Strip

005617874
9003208: RNCC: 3 | RNVC: 2
BL721438-4: RNCC: 3 | RNVC: 9
BL721438-4: RNCC: 5 | RNVC: 9
BL721438-4: RNCC: 5 | RNVC: 9
BL721438-4: RNCC: 5 | RNVC: 9
BL721438-4: RNCC: C | RNVC: 1

1 Jan 1961

5975-00-293-7323
Electrical Conduit Coupling Nut

002937323
10-40460-20: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-624-6949
Cover

006246949
6246949: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-108-8976
Electrical Equipment Mounting Base

011088976
622-1742-002: RNCC: 3 | RNVC: 2

7 Mar 1981

5975-01-107-8901
Electrical-Electronic Equipment Chassis

011078901
330888-1: RNCC: 3 | RNVC: 2

14 Feb 1981

5975-00-333-6300
Flexible Metal Conduit Assembly

003336300
5334403-640: RNCC: 3 | RNVC: 2
C175-0500-3500-5757: RNCC: 5 | RNVC: 9
5334403-640: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-045-1275
Electrical Equipment Cabinet

000451275
CU-2107B: RNCC: 3 | RNVC: 1
PMC1007: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-045-1715
Electrical Equipment Rack

000451715
614937-10: RNCC: 3 | RNVC: 9

16 Jul 2001

5975-00-376-8001
Electrical Conduit Ferrule

003768001
7F6797: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-523-5655
Electrical Conductor Bushing

005235655
SCB16580-4: RNCC: 3 | RNVC: 2
5800041-0027-003: RNCC: 5 | RNVC: 2
343K439: RNCC: 5 | RNVC: 9
343K439: RNCC: 5 | RNVC: 9
16580-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-935-5946
Electrical Components Tie Down Strap

009355946
MS3367-2-1: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

24 Jan 1968

5975-00-797-2863
Electrical Equipment Rack

007972863
CE187216: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-2919
Electrical Equipment Rack

007972919
CE186992-10: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-2998
Electrical Equipment Rack

007972998
CE186992-18: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-3015
Electrical Equipment Rack

007973015
CE186993-5: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-819-7118
Electrical Box Connector

008197118
DHF7S176: RNCC: 3 | RNVC: 2
DHF7S176: RNCC: 3 | RNVC: 9
DHFA7DP: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-357-4439
Cable Marker Sleeve

003574439
446712-2: RNCC: 3 | RNVC: 2

8 Feb 1974

5975-00-799-2584
Electrical Cable Support

007992584
MX3SM: RNCC: 3 | RNVC: 2
8939914-1: RNCC: 5 | RNVC: 9
8939914-1: RNCC: 5 | RNVC: 9
8939914-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-376-6346
Flexible Metal Conduit Assembly

003766346
159-54132-5: RNCC: 3 | RNVC: 2
159-54132-5: RNCC: 5 | RNVC: 2
159-54132-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-788-1846
Electrical-Electronic Equipment Chassis

007881846
434-006: RNCC: 3 | RNVC: 2
CH54APN168: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-377-0110
Packing Nut Assy

003770110
B55-0088: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-056-7567
Cable Marker Sleeve

010567567
ST650713A2A17: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

28 Feb 1978

5975-00-392-9136
Electrical Grounding Plate

003929136
8-510-7A: RNCC: 3 | RNVC: 9
8-510-7A: RNCC: C | RNVC: 1

1 Jan 1961

5975-00-644-0187
Stuffing Tube Packing Nut

006440187
1142865: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-3026
Electrical Equipment Rack

007973026
CE186993-7: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-797-3025
Electrical Equipment Rack

007973025
CE186993-6: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-388-9060
Cable Marker Sleeve

003889060
AN4028-5-7: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-01-109-2997
Junction Box

011092997
31619: RNCC: 3 | RNVC: 9

12 Mar 1981

5975-01-108-6105
Clamp

011086105
403064: RNCC: 3 | RNVC: 2

2 Mar 1981

5975-01-108-6099
Elbow

011086099
W-10891-4: RNCC: 3 | RNVC: 2

2 Mar 1981

5975-00-789-0743
Adapter Electrical

007890743
EB131: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-009-0106
Cable Marker Sleeve

010090106
BA10144-103: RNCC: 3 | RNVC: 2
BA10144-103: RNCC: 3 | RNVC: 9
B10144-103: RNCC: 5 | RNVC: 9

1 Sep 1975

5975-00-009-8718
Flexible Metal Conduit Assembly

000098718
SCB93181: RNCC: 3 | RNVC: 2

11 Aug 1972

5975-00-810-7632
Electrical Box Connector

008107632
321: RNCC: 3 | RNVC: 2
272M0259P001: RNCC: 3 | RNVC: 2
6-1-2337-20-472A: RNCC: 5 | RNVC: 2
272M0259P001: RNCC: 5 | RNVC: 9
KS549701L52: RNCC: 5 | RNVC: 9
KS549701L52: RNCC: 5 | RNVC: 9
6-1-2337-20-472A: RNCC: 5 | RNVC: 9
KS549701L52: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-802-4992
Electrical Conduit Adapter

008024992
60A298: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-004-3656
Electrical Grounding Plate

010043656
8007542-1: RNCC: 3 | RNVC: 2

31 May 1975

5975-00-644-3196
Electrical Box Connector

1 Jan 1963

5975-01-096-3731
Electrical-Electronic Equipment Chassis

010963731
322415-1: RNCC: 3 | RNVC: 2
322415-1: RNCC: 5 | RNVC: 9
322415-1: RNCC: 8 | RNVC: 2

18 Jun 1980

5975-00-805-9359
Electrical Equipment Mounting Base

008059359
76753: RNCC: 3 | RNVC: 9
MT1454ARN31: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-623-6460
Lined Type Conduit

006236460
12623: RNCC: 3 | RNVC: 2
12623: RNCC: 5 | RNVC: 2

1 Mar 1975

5975-00-615-9301
Electrical Conduit Ferrule

006159301
AN3053-32: RNCC: 2 | RNVC: 2
26-3-32: RNCC: 5 | RNVC: 1
26-3-32: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-826-8973
Electrical Equipment Rack

008268973
666137-200: RNCC: 3 | RNVC: 2
MT2258ARR52: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-608-9014
Boot

006089014
H4335: RNCC: 3 | RNVC: 9
190157: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-040-5022
Electrical Equipment Rack

010405022
1400C: RNCC: 3 | RNVC: 2
1400C: RNCC: 5 | RNVC: 9

8 May 1977

5975-00-168-7649
Electrical Equipment Mounting Base

001687649
110040: RNCC: 3 | RNVC: 9
MT4153ASH22V: RNCC: 5 | RNVC: 1
110040: RNCC: C | RNVC: 1

11 Sep 1970

5975-00-122-2422
Flexible Metal Conduit Assembly

001222422
5114173-20: RNCC: 3 | RNVC: 2
5114173-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-122-2418
Flexible Metal Conduit Assembly

001222418
5114173-11: RNCC: 3 | RNVC: 2
5114173-11: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-086-4484
Electrical Components Tie Down Strap

010864484
10S300-2-127: RNCC: 3 | RNVC: 9
10S300-2-127: RNCC: C | RNVC: 1

29 Nov 1979

5975-00-344-9582
Electrical Equipment Rack

003449582
488576: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-534-3593
Cable Marker Sleeve

005343593
5343593: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-633-4925
Junction Box

006334925
SMB157746: RNCC: 3 | RNVC: 2
SMB157746: RNCC: 5 | RNVC: 2
SMB157746: RNCC: 5 | RNVC: 9
SMB157746: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6372
Electrical Cable Nipple

002846372
2095768: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-284-6051
Flexible Metal Conduit Assembly

002846051
87B538: RNCC: 3 | RNVC: 2
WEA2725: RNCC: 5 | RNVC: 9
WEA2725: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-106-8866
Ground Rod

001068866
588X050: RNCC: 3 | RNVC: 2

12 Aug 1968

5975-00-280-3835
Electrical Box Connector

002803835
BG52134: RNCC: 3 | RNVC: 2
BG52134: RNCC: 5 | RNVC: 9
BG52134: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-4361
Junction Box

002804361
5742: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-797-2957
Electrical Equipment Rack

007972957
CE186992-15: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-797-2892
Electrical Equipment Rack

007972892
CE186992-8: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-382-6055
Chassis Base

003826055
716141: RNCC: 3 | RNVC: 2
664879: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-280-9784
Electrical Conduit Ferrule

002809784
117-3-0375: RNCC: 3 | RNVC: 2
117-3-0375: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-817-3728
Fanning Strip

008173728
LS4999A51-60: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-102-3829
Electrical Equipment Mounting Base

001023829
548610: RNCC: 3 | RNVC: 2
S6190-61022-1: RNCC: 7 | RNVC: 2

5 Jun 1968

5975-01-025-1869
Mounting Ring

010251869
50-30480-0030: RNCC: 3 | RNVC: 2

28 Jul 1976

5975-00-997-9772
Junction Box

009979772
V16-003-710: RNCC: 3 | RNVC: 9
EL16-003-184: RNCC: 5 | RNVC: 9

16 Nov 1966

5975-00-797-2865
Electrical Equipment Rack

007972865
CE186992-6: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-2889
Electrical Equipment Rack

007972889
CE186992-3: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-548-4133
Electrical Box Connector

005484133
367444-17: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-824-4351
Cable End Sealing K

008244351
387-4H: RNCC: 3 | RNVC: 9

11 Aug 1967

5975-00-826-8982
Electrical Box Connector

008268982
10-40695-202: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-827-7426
Electrical Box Connector

008277426
19974: RNCC: 3 | RNVC: 2

30 Aug 1967

5975-00-826-6648
Electrical Grounding Plate

008266648
9151287: RNCC: 3 | RNVC: 2
A7333: RNCC: 3 | RNVC: 2
A7333: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-296-2578
Electrical Equipment Rack

002962578
463102-110: RNCC: 3 | RNVC: 2
463102-100: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-300-1240
Upper Bandguy

003001240
CMA111: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-342-9195
Electrical Equipment Mounting Base

003429195
MTA12C: RNCC: 3 | RNVC: 2

4 Jan 1974

5975-00-242-3482
Mounting Plate

002423482
111693: RNCC: 3 | RNVC: 9
111693: RNCC: 5 | RNVC: 9
111693: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-960-5879
Cable Assem Support

009605879
CE187315: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-966-1918
Blank Panel

009661918
LS4174-5: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-142-2450
Flexible Metal Conduit Assembly

001422450
C4P10399-3: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-059-7374
Cable Marker Sleeve

010597374
ST650713A19P43: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

15 Apr 1978

5975-00-246-2205
Ventilation Panel

002462205
0N080593: RNCC: 3 | RNVC: 2

12 Feb 1969

5975-00-937-8749
Electrical Equipment Mounting Base

009378749
10125A112: RNCC: 3 | RNVC: 2

6 Feb 1967

5975-00-337-7853
Coupling Assy

003377853
A58067: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-134-5294
Insulator Bracket

001345294
15ARM30019N: RNCC: 3 | RNVC: 2

30 Apr 1969

5975-00-187-5294
Ground Rod

001875294
MILR11461: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-966-2525
Molded Rub Junction

009662525
2983494: RNCC: 3 | RNVC: 2
2983494: RNCC: 5 | RNVC: 9
1603662: RNCC: 5 | RNVC: 9
2983494: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-140-9553
Rigid Metal Conduit

001409553
32-75035-44: RNCC: 3 | RNVC: 2

10 Sep 1971

5975-00-189-6034
Flexible Metal Conduit

001896034
29894: RNCC: 3 | RNVC: 2
108-21: RNCC: 5 | RNVC: 2
108-20: RNCC: 5 | RNVC: 2
E1200-1-2: RNCC: 5 | RNVC: 2
E1200-1-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-688-2652
Electrical-Electronic Equipment Chassis

006882652
602672: RNCC: 3 | RNVC: 2
602672: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-566-4232
Electrical Conduit Coupling

005664232
32-77027-3: RNCC: 3 | RNVC: 2

15 Jan 1968

5975-00-193-9961
Electrical Conductor Bushing

001939961
SC-B-35556: RNCC: 3 | RNVC: 2
AC0764ISSUEA: RNCC: 5 | RNVC: 2
W226234: RNCC: 5 | RNVC: 2
AC0765: RNCC: 5 | RNVC: 2
AC0765L: RNCC: 5 | RNVC: 9

1 Jan 1963

Load More Results