What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 173 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 173 of 176

5975-01-499-6953
Stuffing Tube

014996953
17P6E2022-515: RNCC: 3 | RNVC: 2

1 Aug 2002

5975-01-450-2717
Electrical Equipment Mounting Base

014502717
622-7265-001: RNCC: 3 | RNVC: 2
280270: RNCC: 5 | RNVC: 2

31 Oct 1997

5975-01-411-5382
Blank Panel

014115382
11463973: RNCC: 3 | RNVC: 2

27 Mar 1995

5975-01-412-0013
Electrical-Electronic Equipment Chassis

014120013
62828-40490: RNCC: 3 | RNVC: 2
62828-40490: RNCC: 5 | RNVC: 9

7 Apr 1995

5975-01-411-7106
Junction Box

014117106
C2420A4: RNCC: 3 | RNVC: 9
00034481032793: RNCC: 5 | RNVC: 9

30 Mar 1995

5975-01-003-9585
Junction Box

010039585
518D796G1: RNCC: 3 | RNVC: 2

15 May 1975

5975-00-938-2494
Interconnecting Box

009382494
868534: RNCC: 3 | RNVC: 9
J2922SQS: RNCC: 5 | RNVC: 2

27 Feb 1970

5975-01-496-7000
Electronic Equipment Mounting Tray

014967000
157308581-001: RNCC: 3 | RNVC: 2

24 Apr 2002

5975-01-409-0527
Electrical Grounding Plate

014090527
2426108-2: RNCC: 3 | RNVC: 2

3 Mar 1995

5975-00-811-3444
Electrical Cable Nipple

008113444
YD20: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-495-8428
Electrical-Electronic Equipment Chassis

014958428
546-7025-006: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-496-0879
Electrical-Electronic Equipment Panel

014960879
687-3810-001: RNCC: 3 | RNVC: 2

2 Apr 2002

5975-01-496-2719
Electrical-Electronic Equipment Chassis

014962719
757-8905-001: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-496-2735
Electrical-Electronic Equipment Chassis

014962735
757-5916-001: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-496-2721
Electrical-Electronic Equipment Chassis

014962721
757-8907-001: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-446-1239
Electrical-Electronic Equipment Panel

014461239
H8132: RNCC: 3 | RNVC: 2
H8132: RNCC: 3 | RNVC: 9
H8132: RNCC: 5 | RNVC: 2

23 Jun 1997

5975-01-446-3973
Blank Panel

014463973
995-4407-001: RNCC: 3 | RNVC: 2
995-4407-001: RNCC: 5 | RNVC: 9

1 Jul 1997

5975-01-446-4093
Electrical-Electronic Equipment Chassis

014464093
8521752: RNCC: 3 | RNVC: 2

1 Jul 1997

5975-00-808-2101
Electrical-Electronic Equipment Chassis

008082101
CB629: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-492-2047
Electrical Equipment Rack

014922047
5104715: RNCC: 3 | RNVC: 2
FS-0219-LMC: RNCC: 5 | RNVC: 2

16 Nov 2001

5975-01-494-3701
Electrical-Electronic Equipment Chassis

014943701
D9408: RNCC: 3 | RNVC: 2

9 Feb 2002

5975-01-493-6997
Electrical Grounding Plate

014936997
4254508-3: RNCC: 3 | RNVC: 2
4254508-3: RNCC: 5 | RNVC: 2

15 Jan 2002

5975-01-302-8204
Electrical Components Tie Down Strap

013028204
696-40527-6-4: RNCC: 3 | RNVC: 2
696-40527-6-4-C: RNCC: 5 | RNVC: 2

20 Jun 1989

5975-01-303-6769
Electrical Components Tie Down Strap

013036769
696-40527-8-2: RNCC: 3 | RNVC: 2
696-40527-8-2-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-303-6770
Electrical Components Tie Down Strap

013036770
696-40527-8-0: RNCC: 3 | RNVC: 2
696-40527-8-0-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-00-957-2782
Electrical Box Connector

009572782
306: RNCC: 3 | RNVC: 2
347C126H02: RNCC: C | RNVC: 1

1 Jan 1962

5975-01-538-0572
Low Voltag Box Assy

015380572
25252: RNCC: 3 | RNVC: 9
25252: RNCC: C | RNVC: 1

8 Mar 2006

5975-01-538-1093
Electrical Equipment Rack

015381093
030668-0002: RNCC: 3 | RNVC: 2

10 Mar 2006

5975-01-492-7864
Electrical-Electronic Equipment Chassis

014927864
109-606-01: RNCC: 3 | RNVC: 2

12 Dec 2001

5975-01-493-3263
Junction Box Cover

014933263
545-7421-004: RNCC: 3 | RNVC: 2

27 Dec 2001

5975-01-492-3790
Electrical-Electronic Equipment Chassis

014923790
6533-1: RNCC: 3 | RNVC: 2

26 Nov 2001

5975-01-492-8362
Flexible Metal Conduit Assembly

014928362
C175R0500-2400-98-99: RNCC: 3 | RNVC: 2

13 Dec 2001

5975-01-443-3989
Electrical-Electronic Equipment Chassis

014433989
9C106: RNCC: 3 | RNVC: 2

9 Apr 1997

5975-01-300-8729
Front Panel Assembl

013008729
32-062743-02: RNCC: 3 | RNVC: 2
54.0069.100.00: RNCC: 5 | RNVC: 2
32-062743-02: RNCC: 5 | RNVC: 9

20 May 1989

5975-01-300-7053
Cable Marker Sleeve

013007053
676-0756-001: RNCC: 3 | RNVC: 2
10134293: RNCC: 6 | RNVC: 9

18 May 1989

5975-01-302-1773
Blank Panel

013021773
4007880-0501: RNCC: 3 | RNVC: 2

10 Jun 1989

5975-01-110-5874
Electrical Conduit Bushing

011105874
270A122: RNCC: 3 | RNVC: 2
270A122: RNCC: 5 | RNVC: 9

2 Apr 1981

5975-01-535-3389
Electrical Tie Down Mounting Base

015353389
CB4020V3N16P750: RNCC: 3 | RNVC: 2
SB6000UG2NY4TP: RNCC: 3 | RNVC: 2
9D0271P104T: RNCC: 5 | RNVC: 2

23 Nov 2005

5975-01-535-0753
Electrical-Electronic Equipment Chassis

015350753
11440424-001: RNCC: 3 | RNVC: 2

14 Nov 2005

5975-01-536-0698
Junction Box

015360698
E10-19446-1: RNCC: 3 | RNVC: 2

19 Dec 2005

5975-01-536-2326
Flexible Metal Conduit Assembly

015362326
227757-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-535-2279
Junction Box

015352279
C99A30404-7: RNCC: 3 | RNVC: 9
C99A30404-7: RNCC: C | RNVC: 1

18 Nov 2005

5975-01-536-2285
Flexible Metal Conduit

015362285
227755-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-1834
Flexible Metal Conduit Assembly

015361834
227700-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-7408
Electrical Equipment Leg

015367408
572F352G01: RNCC: 3 | RNVC: 2
572F352G01: RNCC: 3 | RNVC: 9

12 Jan 2006

5975-01-397-8658
Rigid Metal Conduit

013978658
1310-0101-18: RNCC: 3 | RNVC: 2
1310-0101-18: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-003-8937
Cable Grip

010038937
H336: RNCC: 3 | RNVC: 2

12 May 1975

5975-01-104-0138
Electrical-Electronic Equipment Chassis

011040138
777-1891-204: RNCC: 3 | RNVC: 2
MX-9521/A: RNCC: 5 | RNVC: 2

25 Nov 1980

5975-01-534-5160
Electrical-Electronic Equipment Chassis

015345160
11472515: RNCC: 3 | RNVC: 2

25 Oct 2005

5975-01-533-5860
Junction Box

015335860
3193572-1: RNCC: 3 | RNVC: 2

20 Sep 2005

5975-01-534-7565
Electrical-Electronic Equipment Chassis

015347565
11467083-001: RNCC: 3 | RNVC: 2

1 Nov 2005

5975-01-534-8381
Electrical Grounding Plate

015348381
152940-1: RNCC: 3 | RNVC: 2

3 Nov 2005

5975-01-393-3433
Electrical Equipment Mounting Base

013933433
1N4222: RNCC: 3 | RNVC: 2

18 Jul 1994

5975-01-394-2775
Electrical-Electronic Equipment Chassis

013942775
174D1868G1: RNCC: 3 | RNVC: 2

6 Aug 1994

5975-01-296-8165
Stuffing Tube Adapter

012968165
714614-4: RNCC: 3 | RNVC: 2

24 Mar 1989

5975-00-985-1494
Electrical Components Tie Down Strap

009851494
4040938-511: RNCC: 3 | RNVC: 9
4040938-511: RNCC: 5 | RNVC: 2

21 Oct 1966

5975-00-962-7190
Rigid Metal Conduit

009627190
775159-31: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-530-8933
Electrical Equipment Cabinet

015308933
10280422: RNCC: 3 | RNVC: 2

15 Jun 2005

5975-01-531-3473
Electrical Equipment Mounting Base

015313473
270-2682-020: RNCC: 3 | RNVC: 2

5 Jul 2005

5975-01-391-0484
Electrical Equipment Rack

013910484
689-3733-001: RNCC: 3 | RNVC: 2

2 Jun 1994

5975-01-391-4423
Electrical Equipment Mounting Base

013914423
5198006: RNCC: 3 | RNVC: 2

10 Jun 1994

5975-01-392-1559
Metallic Raceway

013921559
6A12085: RNCC: 3 | RNVC: 2

24 Jun 1994

5975-01-392-3098
Electrical Equipment Rack

013923098
41212999-007: RNCC: 3 | RNVC: 2

27 Jun 1994

5975-01-392-5939
Junction Box Cover

013925939
6228277: RNCC: 3 | RNVC: 2

1 Jul 1994

5975-00-441-2543
Connector

004412543
6158: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-431-6794
Cable Strain Relief Bushing

014316794
FXC-B: RNCC: 3 | RNVC: 2

16 May 1996

5975-01-097-3399
Blank Panel

010973399
21007: RNCC: 3 | RNVC: 2
21007: RNCC: 5 | RNVC: 2

10 Jul 1980

5975-00-669-7260
Flexible Metal Conduit Assembly

006697260
4394793-502: RNCC: 3 | RNVC: 2
XH-4551: RNCC: 5 | RNVC: 2
C175-0250-2300-5757: RNCC: 5 | RNVC: 2
C175-0250-2300-5757: RNCC: 5 | RNVC: 9
4394793-502: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-8089
Flexible Metal Conduit Assembly

006698089
HTCD4K4100AB: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-525-4143
Electrical Components Tie Down Strap

015254143
ILT6LHCO: RNCC: 3 | RNVC: 2

8 Nov 2004

5975-01-527-5691
Flexible Metal Conduit Assembly

015275691
363844-5: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-528-1297
Flexible Metal Conduit Assembly

015281297
227717-DL0000: RNCC: 3 | RNVC: 2

3 Mar 2005

5975-01-390-1661
Cable Terminal Chamber

013901661
XAGA550A135/170: RNCC: 3 | RNVC: 2

12 May 1994

5975-01-429-8197
Cable Marker Sleeve

014298197
N13714-050-002: RNCC: 3 | RNVC: 2

19 Apr 1996

5975-01-430-4931
Electrical Equipment Cabinet

014304931
TKB/SP85 150152: RNCC: 3 | RNVC: 9
TKB/SP85 150152: RNCC: C | RNVC: 1

30 Apr 1996

5975-01-431-3407
Electrical Tie Down Mounting Base

014313407
TM3S25-M: RNCC: 3 | RNVC: 2

10 May 1996

5975-01-432-0233
Electrical-Electronic Equipment Chassis

014320233
WS-C5001: RNCC: 3 | RNVC: 2

23 May 1996

5975-01-525-5394
Electrical Equipment Rack

015255394
16E1320-23: RNCC: 3 | RNVC: 2

15 Nov 2004

5975-01-526-3151
Electrical Equipment Cabinet

015263151
DS4500: RNCC: 3 | RNVC: 2

14 Dec 2004

5975-01-387-3405
Cable Marker Sleeve

013873405
58139-43060-1: RNCC: 3 | RNVC: 2

2 Mar 1994

5975-01-454-1600
Electrical Equipment Rack Base

014541600
3614549-1001: RNCC: 3 | RNVC: 2
3614549-1001: RNCC: 5 | RNVC: 2
704A45-400-050: RNCC: 5 | RNVC: 2

20 Mar 1998

5975-01-452-9550
Cable Marker Sleeve

014529550
TMS3-8-47-9: RNCC: 3 | RNVC: 2

13 Feb 1998

5975-01-452-9549
Cable Marker Sleeve

014529549
TMS3-32-48-9: RNCC: 3 | RNVC: 2

13 Feb 1998

5975-01-453-3533
Junction Box Assembly

014533533
K684160-5: RNCC: 3 | RNVC: 2

26 Feb 1998

5975-01-386-1630
Electrical-Electronic Equipment Chassis

013861630
A405A075-93: RNCC: 3 | RNVC: 2

28 Jan 1994

5975-01-425-3929
Electrical Equipment Mounting Base

014253929
4231737: RNCC: 3 | RNVC: 2

20 Feb 1996

5975-01-425-7337
Stuffing Tube

014257337
41008814-001: RNCC: 3 | RNVC: 2

27 Feb 1996

5975-01-070-2713
Electrical Conduit

010702713
CRN2646-41: RNCC: 3 | RNVC: 2
GA111-4-2: RNCC: 5 | RNVC: 2
C8922-105-1: RNCC: 5 | RNVC: 2

8 Jan 1979

5975-01-451-1946
Electrical-Electronic Equipment Chassis

014511946
11439877: RNCC: 3 | RNVC: 2

8 Dec 1997

5975-01-451-1961
Enable C Pwb Heater

014511961
11450353-9: RNCC: 3 | RNVC: 2

8 Dec 1997

5975-01-452-0407
Electrical-Electronic Equipment Panel

014520407
151-006305-001: RNCC: 3 | RNVC: 2

13 Jan 1998

5975-01-383-7391
Electrical-Electronic Equipment Chassis

013837391
80402: RNCC: 3 | RNVC: 2

1 Dec 1993

5975-01-423-4168
Electrical Equipment Cabinet

014234168
3041429G1: RNCC: 3 | RNVC: 2

26 Dec 1995

5975-01-423-4655
Conduit Outlet Cover

014234655
7589325G1: RNCC: 3 | RNVC: 2

27 Dec 1995

5975-01-423-2508
Electrical Cable Nipple

014232508
6317895-103: RNCC: 3 | RNVC: 2

19 Dec 1995

5975-01-424-4899
Electrical-Electronic Equipment Panel

014244899
320-5846403: RNCC: 3 | RNVC: 9

29 Jan 1996

5975-01-424-3155
Electrical-Electronic Equipment Chassis

014243155
3C6001: RNCC: 3 | RNVC: 9

25 Jan 1996

5975-01-451-3927
Electrical Equipment Cabinet

014513927
9076-308: RNCC: 3 | RNVC: 2
9076-308: RNCC: 5 | RNVC: 9

15 Dec 1997

5975-01-451-9447
Cable Marker Sleeve

014519447
013-007382-018: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-452-1799
Blank Panel

014521799
151-006298-001: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-452-0755
Electrical Equipment Mounting Base

014520755
8026018: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-451-2439
Cable Reinforcing Link

014512439
975527-01: RNCC: 3 | RNVC: 2

10 Dec 1997

5975-01-263-0395
Short Tray Assy

012630395
3201661-501: RNCC: 3 | RNVC: 2
3201661-501: RNCC: 5 | RNVC: 9

9 Sep 1987

5975-01-420-9114
Electrical Equipment Cabinet

014209114
6531-UMK: RNCC: 3 | RNVC: 2

27 Oct 1995

5975-01-421-3385
Electrical-Electronic Equipment Chassis

014213385
7598825G1: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-423-5075
Electrical-Electronic Equipment Chassis

014235075
797-0879-001: RNCC: 3 | RNVC: 2

29 Dec 1995

5975-01-058-2205
Cable Marker Sleeve

010582205
ST650713A2A19: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

24 Mar 1978

5975-01-419-4349
Electrical Equipment Mounting Base

014194349
8022031000A: RNCC: 3 | RNVC: 2
8022031000A: RNCC: 3 | RNVC: 9

21 Sep 1995

5975-01-421-3394
Electrical-Electronic Equipment Chassis

014213394
20603773G1: RNCC: 3 | RNVC: 2
174D1675G1: RNCC: 5 | RNVC: 9

6 Nov 1995

5975-00-675-4341
Junction Box

006754341
52297A: RNCC: 3 | RNVC: 9
52297: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-970-2639
Rigid Metal Conduit Assembly

009702639
NAF1150-6AB58: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-446-1227
Source Excitation

014461227
SIOA0815: RNCC: 3 | RNVC: 9

23 Jun 1997

5975-01-447-8878
Electrical Equipment Shelf

014478878
77-104386-01: RNCC: 3 | RNVC: 2
77-104386-01: RNCC: 5 | RNVC: 9

15 Aug 1997

5975-00-785-6394
Electrical Box Connector

007856394
ST1: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-386-1149
Electrical-Electronic Equipment Chassis

013861149
652-3125-051: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-01-418-1855
Guide Rail

014181855
9D0090-32U: RNCC: 3 | RNVC: 2
9D0090-32U: RNCC: 5 | RNVC: 2

22 Aug 1995

5975-01-418-1629
Guide Rail

014181629
RC11090-10U: RNCC: 3 | RNVC: 2
9D0090-10U: RNCC: 5 | RNVC: 2

21 Aug 1995

5975-01-581-5633
Junction Box Cover

015815633
915689-4: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-00-770-4361
Electrical Equipment Rack

007704361
463873-150: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-384-0695
Electrical Cable Support

013840695
0N383107-1: RNCC: 3 | RNVC: 2

8 Dec 1993

5975-01-383-2856
Blank Panel

013832856
227BC504-1: RNCC: 3 | RNVC: 9
227BC504-1: RNCC: 5 | RNVC: 9

19 Nov 1993

5975-01-383-9449
Electrical Equipment Mounting Base

013839449
252760-1: RNCC: 3 | RNVC: 2
PS317516-06: RNCC: 5 | RNVC: 2

7 Dec 1993

5975-01-273-7216
Electrical-Electronic Equipment Chassis

012737216
74-23655-00: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-578-7526
Electronic Junction Rack

015787526
LS13179-L20: RNCC: 3 | RNVC: 2

19 Oct 2009

5975-01-578-5365
Electrical Components Tie Down Strap

015785365
TY075-18-20: RNCC: 3 | RNVC: 2

9 Oct 2009

5975-01-580-1873
Electrical Equipment Rack

015801873
RX1727-600: RNCC: 3 | RNVC: 2

7 Dec 2009

5975-01-578-8208
Junction Box

015788208
915406-3: RNCC: 3 | RNVC: 2

21 Oct 2009

5975-01-580-3777
Electrical Components Tie Down Strap

015803777
PYC-1: RNCC: 3 | RNVC: 2

12 Dec 2009

5975-01-581-2703
Electrical Equipment Rack

015812703
RX1688-2: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-383-1079
Radio Frequency Cable Splicing Kit

013831079
80-6101-0876-5: RNCC: 3 | RNVC: 9
80-6101-0876-5: RNCC: 5 | RNVC: 9

19 Nov 1993

5975-00-669-7668
Flexible Metal Conduit Assembly

006697668
HTCD4K1508CE: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-576-6507
Electrical Conduit Ferrule

015766507
687-207X008: RNCC: 3 | RNVC: 2

10 Aug 2009

5975-01-277-1327
Dust And Moisture Seal Boot

012771327
2673263P5: RNCC: 3 | RNVC: 1

18 Apr 1988

5975-01-278-1566
Cable Tie Kit

012781566
600S04068: RNCC: 3 | RNVC: 2

3 May 1988

5975-01-379-9584
Terminal Board Marker Strip

013799584
RC11090-2P: RNCC: 3 | RNVC: 2
9D0090-2P: RNCC: 3 | RNVC: 2

12 Sep 1993

5975-01-380-4790
Electrical-Electronic Equipment Panel

013804790
476272-01: RNCC: 3 | RNVC: 2

20 Sep 1993

5975-01-381-0753
Electrical-Electronic Equipment Chassis

013810753
13027537: RNCC: 3 | RNVC: 2

7 Oct 1993

5975-00-615-9854
Interconnecting Box

006159854
SCDL113906: RNCC: 3 | RNVC: 2
J668GR: RNCC: 3 | RNVC: 2

16 Aug 1967

5975-00-872-2183
Electrical Equipment Mounting Base

008722183
K2335-4: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-660-3589
Electrical Equipment Cabinet

006603589
2060332: RNCC: 3 | RNVC: 2

13 Jul 1967

5975-01-574-6493
Electrical-Electronic Equipment Panel

015746493
7337327: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-574-8825
Electrical-Electronic Equipment Chassis

015748825
CPSMC1310-100: RNCC: 3 | RNVC: 9

12 Jun 2009

5975-01-576-1520
Electrical Equipment Mounting Base

015761520
050-03284-0001: RNCC: 3 | RNVC: 2

22 Jul 2009

5975-01-576-2301
Electrical-Electronic Equipment Chassis

015762301
255300-101: RNCC: 3 | RNVC: 2
255300-101: RNCC: 5 | RNVC: 2

24 Jul 2009

5975-00-903-9970
Electrical Entrance Elbow

009039970
1491: RNCC: 3 | RNVC: 2
SL602: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-890-6808
Strain Electrical Conductor Clamp

008906808
7C1-24: RNCC: 3 | RNVC: 2
7C1-24: RNCC: 5 | RNVC: 2
454151-1: RNCC: 5 | RNVC: 2
454151-1: RNCC: 5 | RNVC: 2
454151-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-571-5629
Electrical Equipment Mounting Base

015715629
70200-101: RNCC: 3 | RNVC: 2

9 Feb 2009

5975-01-571-2771
Electrical-Electronic Equipment Chassis

015712771
986-2935-001: RNCC: 3 | RNVC: 2

29 Jan 2009

5975-01-572-4380
Electrical Conduit Adapter

015724380
C120DB1409AC: RNCC: 3 | RNVC: 2
C120DB1409AC: RNCC: 5 | RNVC: 2
C120DB1409AC: RNCC: 5 | RNVC: 2

11 Mar 2009

5975-01-573-4924
Flexible Metal Conduit

015734924
MIL-PRF-24758A-E: RNCC: 3 | RNVC: 9
M24758-E: RNCC: C | RNVC: 1

24 Apr 2009

5975-01-273-7040
Printer Panel Assy

012737040
3060-1020: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-375-2780
Electrical-Electronic Equipment Panel

013752780
68710-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-9541
Electrical Equipment Cabinet

013759541
27632-101: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-376-4875
Blank Panel

013764875
0N327295-1: RNCC: 3 | RNVC: 2

4 Jun 1993

5975-00-935-2285
Electrical Box Connector

009352285
DB43890: RNCC: 3 | RNVC: 2
DB438-90: RNCC: 3 | RNVC: 2
28-26130B01: RNCC: C | RNVC: 1

8 Nov 1968

5975-01-569-7107
Electrical Equipment Cabinet

015697107
14701-1: RNCC: 3 | RNVC: 2

8 Dec 2008

5975-01-569-8946
Cable Terminal Chamber

015698946
204-57433-4: RNCC: 3 | RNVC: 2

10 Dec 2008

5975-01-570-4057
Electrical Equipment Cabinet Base Assy

015704057
204-57462-1: RNCC: 3 | RNVC: 2

29 Dec 2008

5975-01-296-4615
Electrical Wall Plate

012964615
7102-0038-03: RNCC: 3 | RNVC: 2

20 Mar 1989

5975-01-296-8147
Cable Hanger

012968147
717612-1: RNCC: 3 | RNVC: 2

24 Mar 1989

5975-01-373-9481
Electrical Conduit Elbow

013739481
6-1-9987: RNCC: 3 | RNVC: 2

13 Apr 1993

5975-01-375-2797
Electrical-Electronic Equipment Panel

013752797
68727-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-374-6693
Electrical Nonmetallic Conduit Assembly

013746693
LS10046C0135DDS: RNCC: 3 | RNVC: 2

27 Apr 1993

5975-01-375-2402
Flexible Metal Conduit

013752402
6-1-8096: RNCC: 3 | RNVC: 2
6-1-8096: RNCC: 5 | RNVC: 9

7 May 1993

5975-01-294-1160
Junction Box

012941160
H317E: RNCC: 3 | RNVC: 2

10 Feb 1989

5975-00-240-3190
Front Assembl Panel

002403190
0N089009-1: RNCC: 3 | RNVC: 2
0N089481-1: RNCC: 3 | RNVC: 2

31 Oct 1969

5975-01-260-7012
Blade

012607012
8000-417P: RNCC: 3 | RNVC: 2

4 Aug 1987

5975-00-764-9956
Electrical Equipment Mounting Base

007649956
123SME50067-1: RNCC: 3 | RNVC: 2
123SME50067-1: RNCC: 5 | RNVC: 9

7 Apr 1972

5975-00-794-8769
Rim Clenchin Clamp

007948769
1053351: RNCC: 3 | RNVC: 2
1053351: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-796-8995
Flexible Metal Conduit Assembly

007968995
7968995: RNCC: 3 | RNVC: 2

9 Apr 1969

5975-00-797-2876
Electrical Equipment Rack

007972876
CE186992-2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-563-9749
Electrical Components Tie Down Strap

015639749
6375A: RNCC: 3 | RNVC: 2

30 May 2008

5975-01-565-5079
Electrical Fitting Mounting Base

015655079
5140005-1: RNCC: 3 | RNVC: 2

28 Jul 2008

5975-01-566-8542
Electrical Equipment Cabinet

015668542
39Y8955: RNCC: 3 | RNVC: 2

11 Sep 2008

5975-01-567-2830
Mts Pump Control Dr

015672830
8N46(REV.H): RNCC: 3 | RNVC: 1

23 Sep 2008

5975-01-568-9186
Junction Box Cover

015689186
70550-02139-104: RNCC: 3 | RNVC: 2

13 Nov 2008

5975-01-292-6038
Adapter Hoist

012926038
603559: RNCC: 3 | RNVC: 2

20 Jan 1989

5975-01-292-6963
Electrical Components Tie Down Strap

012926963
1376M24P01: RNCC: 3 | RNVC: 2

20 Jan 1989

5975-01-400-2311
Electrical Equipment Rack

014002311
MVME952: RNCC: 3 | RNVC: 9

12 Dec 1994

5975-01-374-0261
Strain Electrical Conductor Clamp

013740261
8630-193: RNCC: 3 | RNVC: 2

14 Apr 1993

5975-00-679-6738
Junction Box Cover

006796738
SC-B-70574: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-562-1796
Junction Box Cover

015621796
333757: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-00-985-6292
Electrical Cable Tray

009856292
6A06030: RNCC: 3 | RNVC: 2

14 May 1972

5975-01-398-6881
Electrical-Electronic Equipment Chassis

013986881
M3859: RNCC: 3 | RNVC: 2
M3859: RNCC: 5 | RNVC: 9

7 Nov 1994

5975-01-398-0486
Cable Spacer

013980486
50-055860-001: RNCC: 3 | RNVC: 9

24 Oct 1994

5975-01-399-5505
Electrical-Electronic Equipment Chassis

013995505
DM4741: RNCC: 3 | RNVC: 2

29 Nov 1994

5975-00-636-4240
Electrical Conduit Elbow

006364240
59067: RNCC: 3 | RNVC: 2
E1124-243-10: RNCC: 5 | RNVC: 2
E1124-243-10: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-251-4181
Electrical Components Tie Down Strap

012514181
621-1714-001: RNCC: 3 | RNVC: 2

19 Mar 1987

5975-01-557-1974
Electrical Equipment Rack

015571974
SRK-2XAZ042A-IP: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-559-4611
Electrical Box Divider

015594611
H970172-001: RNCC: 3 | RNVC: 2

18 Dec 2007

5975-01-559-6496
Electronic Equipment Mounting Tray

015596496
C99A9409-3: RNCC: 1 | RNVC: 2
158010: RNCC: 3 | RNVC: 2

28 Dec 2007

5975-01-286-6768
Tee Couplining

012866768
25436-17: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-289-2182
Electrical Equipment Cabinet

012892182
098406-0150: RNCC: 3 | RNVC: 2
FA9996-7: RNCC: 5 | RNVC: 2

18 Nov 1988

5975-00-970-2632
Rigid Metal Conduit Assembly

009702632
NAF1150-3AB132: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-968-6124
Junction Box Cover

009686124
MT3436-063-008: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-397-4114
Flexible Metal Conduit

013974114
1310-0101-38: RNCC: 3 | RNVC: 2
1310-0101-38: RNCC: 5 | RNVC: 9

8 Oct 1994

5975-01-397-4675
Electrical-Electronic Equipment Chassis

013974675
3030-01-HW: RNCC: 3 | RNVC: 2

11 Oct 1994

5975-01-392-1688
Blank Panel

013921688
174D5912P1: RNCC: 3 | RNVC: 2

24 Jun 1994

5975-01-393-3495
Electrical Nonmetallic Conduit Assembly

013933495
5493230-011: RNCC: 3 | RNVC: 2
5493230-011: RNCC: 5 | RNVC: 2

18 Jul 1994

5975-01-391-7752
Shop Set Installation Electrical Kit

013917752
689-3734-001: RNCC: 3 | RNVC: 2

16 Jun 1994

5975-01-393-0740
Electrical Tie Down Mounting Base

013930740
TC5363X: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-01-393-8282
Electrical Equipment Mounting Base

013938282
10400-0357-01: RNCC: 3 | RNVC: 2

27 Jul 1994

5975-00-625-8155
Flexible Metal Conduit Assembly

006258155
S2206-615: RNCC: 3 | RNVC: 2
2206-615: RNCC: 5 | RNVC: 2
S3002-0615: RNCC: 5 | RNVC: 9
E1199-484-0615: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-553-5968
Electrical Equipment Cabinet

015535968
7820-740: RNCC: 3 | RNVC: 2

19 Jul 2007

5975-01-553-5420
Electrical Equipment Rack

015535420
7124-3010-2: RNCC: 3 | RNVC: 9

18 Jul 2007

5975-01-467-7050
Electrical Equipment Shelf

014677050
J1492B: RNCC: 3 | RNVC: 2

10 Sep 1999

5975-01-282-1350
Machine Housing

012821350
34-064369-101: RNCC: 3 | RNVC: 2
52.0258.011.01: RNCC: 5 | RNVC: 2
34-064369-101: RNCC: 5 | RNVC: 9

8 Jul 1988

5975-01-284-3420
Interior Cable Rack

012843420
10020470010: RNCC: 3 | RNVC: 2
2047: RNCC: 5 | RNVC: 9

23 Aug 1988

5975-01-390-7887
Electrical-Electronic Equipment Chassis

013907887
687-4427-006: RNCC: 3 | RNVC: 2

26 May 1994

5975-01-392-4175
Junction Box

013924175
DAA7294D016-007: RNCC: 3 | RNVC: 2

29 Jun 1994

5975-01-392-7758
Electrical-Electronic Equipment Chassis

013927758
8926-1: RNCC: 3 | RNVC: 9

6 Jul 1994

5975-01-392-3095
Electrical Equipment Rack

013923095
CAB9613: RNCC: 3 | RNVC: 2

27 Jun 1994

5975-00-636-4502
Electrical Cable Protector

006364502
26929: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-182-1087
Cab Video Generator

011821087
31-062253-01: RNCC: 3 | RNVC: 2
31-062253-01: RNCC: 5 | RNVC: 9

20 Jun 1984

5975-01-188-7459
Electrical Equipment Cabinet

011887459
110D175G1: RNCC: 3 | RNVC: 2

7 Sep 1984

5975-01-467-0577
Electronic Equipment Mounting Tray

014670577
MI585146-1: RNCC: 3 | RNVC: 2

11 Aug 1999

5975-01-465-9743
Electrical Equipment Rack

014659743
J1500A: RNCC: 3 | RNVC: 2

29 Jun 1999

5975-01-465-2219
Cable Spacer

014652219
9224-091: RNCC: 3 | RNVC: 2

26 May 1999

5975-01-465-8025
Flexible Metal Conduit Assembly

014658025
S6162-63806-10: RNCC: 3 | RNVC: 2

22 Jun 1999

5975-01-467-0566
Cable Marker Sleeve

014670566
TMS-SCE-1/4-2.0-S1-4: RNCC: 3 | RNVC: 2
ECS6036EN4: RNCC: 5 | RNVC: 2
FV 2194601 ITEM 24: RNCC: 5 | RNVC: 2
FV 2194601/24: RNCC: 5 | RNVC: 2
TMS-SCE-1/4-2.0-S1-4: RNCC: 5 | RNVC: 2
15010338: RNCC: 5 | RNVC: 2
TMS-SCE-1/4-2.0-S1-4: RNCC: 5 | RNVC: 2

11 Aug 1999

5975-01-466-0007
Blank Panel

014660007
E7749A: RNCC: 3 | RNVC: 2
E7749A: RNCC: 3 | RNVC: 9
E7749A: RNCC: 5 | RNVC: 9
E7749A: RNCC: 5 | RNVC: 9

30 Jun 1999

5975-01-467-3464
Seperator

014673464
65700-90066-101: RNCC: 3 | RNVC: 2

25 Aug 1999

5975-01-467-3807
Electronic Equipment Mounting Tray

014673807
8524177-901: RNCC: 3 | RNVC: 2

26 Aug 1999

5975-01-466-3195
Electrical-Electronic Equipment Chassis

014663195
MP3600D: RNCC: 3 | RNVC: 2

14 Jul 1999

5975-01-386-4253
Electrical Components Tie Down Strap

013864253
PRT8EH-100: RNCC: 3 | RNVC: 2

4 Feb 1994

5975-01-386-5720
Electrical Nonmetallic Conduit Assembly

013865720
254626-0001: RNCC: 3 | RNVC: 2

8 Feb 1994

5975-01-388-4223
Sectiona Terminal Junction Block

013884223
RC11090-20U: RNCC: 3 | RNVC: 2
9D0090-20U: RNCC: 5 | RNVC: 2
9D0090-20U: RNCC: 5 | RNVC: 2
9D0090-20U: RNCC: 5 | RNVC: 9

30 Mar 1994

5975-01-389-9268
Electrical Equipment Mounting Base

013899268
950F701-1: RNCC: 3 | RNVC: 2
950F701-1: RNCC: 5 | RNVC: 9

6 May 1994

5975-01-460-7149
Cable Marker Sleeve

014607149
249-150/210-218: RNCC: 3 | RNVC: 9

13 Nov 1998

5975-01-460-8422
Flexible Nonmetallic Conduit

014608422
8353-1: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-01-461-2021
Electrical-Electronic Equipment Panel

014612021
11466371-002: RNCC: 3 | RNVC: 2

3 Dec 1998

5975-01-461-5449
Electrical Equipment Mounting Base

014615449
BH25685B: RNCC: 3 | RNVC: 2

16 Dec 1998

5975-01-461-3996
Housing Section

014613996
11456303: RNCC: 3 | RNVC: 2

10 Dec 1998

5975-01-463-5254
Cable Spacer

014635254
9905-289-3605: RNCC: 3 | RNVC: 2
5D0462-1: RNCC: 5 | RNVC: 2

25 Mar 1999

5975-01-460-5676
Junction Box

014605676
EDC-024: RNCC: 3 | RNVC: 2

9 Nov 1998

5975-01-461-1306
Flexible Metal Conduit

014611306
8212-13: RNCC: 3 | RNVC: 2

1 Dec 1998

5975-01-247-4052
Electrical Equipment Cabinet

012474052
MMC86-044: RNCC: 3 | RNVC: 2
MMC86-044: RNCC: D | RNVC: 9

6 Jan 1987

5975-00-770-0151
Duct

007700151
3-1664-16-88-4: RNCC: 3 | RNVC: 2
3-1664-16-88-4: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-317-5644
Electrical-Electronic Equipment Chassis

013175644
521649: RNCC: 3 | RNVC: 2

1 Apr 1990

5975-00-774-8328
Rigid Metal Conduit

007748328
55-754: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-792-9243
Flexible Metal Conduit Assembly

007929243
10-86005: RNCC: 3 | RNVC: 2
10-86005: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-457-0322
Electrical Equipment Shelf

014570322
303607-B21: RNCC: 3 | RNVC: 2

8 Jul 1998

5975-01-455-7318
Rigid Metal Conduit

014557318
8328-1: RNCC: 3 | RNVC: 2

13 May 1998

5975-01-458-1427
Electrical-Electronic Equipment Panel

014581427
21U00-0000: RNCC: 3 | RNVC: 2

14 Aug 1998

5975-01-459-6674
Electrical Equipment Mounting Base

014596674
822-0596: RNCC: 3 | RNVC: 2

9 Oct 1998

5975-01-458-8793
Electrical-Electronic Equipment Chassis

014588793
89D5653-001: RNCC: 3 | RNVC: 2

14 Sep 1998

5975-01-259-5232
Blade

012595232
8000-417S: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-312-8013
Electrical-Electronic Equipment Panel

013128013
8008-5019-1: RNCC: 3 | RNVC: 9

22 Dec 1989

5975-01-316-0319
Electrical-Electronic Equipment Chassis

013160319
DAA3383A262-101: RNCC: 3 | RNVC: 2

2 Mar 1990

5975-00-557-4140
Blank Panel

005574140
324678BR: RNCC: 3 | RNVC: 2
324678: RNCC: 5 | RNVC: 2
324678BR: RNCC: 5 | RNVC: 2
324678BR: RNCC: 5 | RNVC: 9
324678BR: RNCC: 5 | RNVC: 9
324678BR: RNCC: C | RNVC: 1

8 Nov 1974

5975-00-771-6628
Receptical Fitting

007716628
7716628: RNCC: 3 | RNVC: 2

25 Nov 1966

5975-01-551-3944
Blank Panel

015513944
2100027-102: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-551-2152
Electrical Box Connector

015512152
1591CSBK: RNCC: 3 | RNVC: 2

9 May 2007

5975-01-310-3348
Electrical Conduit Union

013103348
3223: RNCC: 3 | RNVC: 2
6L.3887.017.00-336518: RNCC: 5 | RNVC: 2
6L.3887.017.00-A001: RNCC: 5 | RNVC: 2

2 Nov 1989

5975-01-311-8625
Electrical-Electronic Equipment Chassis

013118625
13099858-2: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-00-524-6742
Electrical Conduit Ferrule

005246742
S2577-3: RNCC: 3 | RNVC: 2
2ZA124-5: RNCC: 5 | RNVC: 2
SC-D-2035-3: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-148-4429
Pillar

011484429
DYN28: RNCC: 3 | RNVC: 9

5 Mar 1983

5975-01-151-2238
Rigid Metal Conduit

011512238
29-2514-502: RNCC: 3 | RNVC: 2

14 Apr 1983

5975-01-034-5539
Electrical Cable Protector

010345539
M24705/1BN2006: RNCC: 2 | RNVC: 2
M24705: RNCC: 4 | RNVC: 1
20/6: RNCC: 5 | RNVC: 9
20/6: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-307-1056
Upper Hoist Cover

013071056
EC-10012-1: RNCC: 3 | RNVC: 2

7 Sep 1989

5975-01-307-6656
An Spherical Collar

013076656
1168907-1: RNCC: 3 | RNVC: 9
1168907-1: RNCC: C | RNVC: 1

16 Sep 1989

5975-01-309-2087
Electrical-Electronic Equipment Chassis

013092087
630-0312: RNCC: 3 | RNVC: 2

13 Oct 1989

5975-00-521-7598
Co Cable Rack Clamp

005217598
P403474: RNCC: 3 | RNVC: 9
P403474: RNCC: 5 | RNVC: 9
P403474: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-511-6072
Conduit-Inner Wing

005116072
32-75035-47: RNCC: 3 | RNVC: 2

26 Jul 1974

5975-01-141-4941
Electrical-Electronic Equipment Chassis

011414941
0N312311: RNCC: 3 | RNVC: 2
OQ-323/GRM: RNCC: 5 | RNVC: 2

30 Oct 1982

5975-01-543-6803
Electrical-Electronic Equipment Chassis

015436803
AB241A: RNCC: 3 | RNVC: 2

19 Sep 2006

5975-01-544-3583
Electrical-Electronic Equipment Chassis

015443583
12V12OP898N4VCC0-NGCWR: RNCC: 3 | RNVC: 2

11 Oct 2006

5975-01-543-9304
Electrical Equipment Mounting Base

015439304
16E1348-205: RNCC: 3 | RNVC: 2

26 Sep 2006

5975-01-544-0487
Chassis Eletronica

015440487
268822: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-00-989-0721
Electrical Box Connector

009890721
SP5323: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-303-6748
Electrical Components Tie Down Strap

013036748
TYS1000: RNCC: 3 | RNVC: 2

4 Jul 1989

5975-01-446-3946
Blank Panel

014463946
634-0351-001: RNCC: 3 | RNVC: 2

1 Jul 1997

5975-01-305-1608
Electrical-Electronic Equipment Panel

013051608
156070-3: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-303-6772
Electrical Components Tie Down Strap

013036772
696-40527-6-7: RNCC: 3 | RNVC: 2
696-40527-6-7-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-00-520-8483
T Junction Box Assy

005208483
177D628-12: RNCC: 3 | RNVC: 2
199C622G3: RNCC: 3 | RNVC: 2
177D628-12: RNCC: 3 | RNVC: 2
199C622G3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-142-6847
Electrical Equipment Mounting Base

011426847
636-5799-001: RNCC: 3 | RNVC: 2

18 Nov 1982

5975-01-540-9605
Electrical Equipment Cabinet

015409605
FA9639: RNCC: 3 | RNVC: 2

9 Jun 2006

5975-01-541-2394
Electronic Junction Rack

015412394
93072SX: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-445-6670
Electrical Equipment Rack

014456670
HP5062-7345: RNCC: 3 | RNVC: 2

9 Jun 1997

5975-01-444-2397
Electrical Equipment Mounting Base

014442397
MP109021043: RNCC: 3 | RNVC: 9
MP109021043: RNCC: C | RNVC: 1

1 May 1997

5975-01-468-9229
Electrical Conduit Ferrule

014689229
FERRULE SET 0038: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-470-3028
Rigid Nonmetallic Conduit

014703028
728-130-001: RNCC: 3 | RNVC: 2
728-130-001: RNCC: 5 | RNVC: 9

15 Dec 1999

5975-01-472-2598
Cable Marker Sleeve

014722598
2642-32: RNCC: 3 | RNVC: 2

24 Feb 2000

5975-01-008-7403
Electrical Components Tie Down Strap

010087403
PLM1M-C: RNCC: 3 | RNVC: 2

29 Aug 1975

5975-01-012-3537
Cap-Detent

010123537
249637: RNCC: 3 | RNVC: 2

11 Nov 1975

5975-01-007-8776
Electrical Box Connector

010078776
CGFP599: RNCC: 3 | RNVC: 2

10 Aug 1975

5975-00-972-8026
Locknut Electrical

009728026
73001A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-443-0253
Electrical-Electronic Equipment Chassis

014430253
908685-0101: RNCC: 3 | RNVC: 9
4099600P1: RNCC: 5 | RNVC: 2
908685-0101: RNCC: C | RNVC: 1

28 Mar 1997

5975-01-442-4109
Electrical Equipment Rack

014424109
PM2193-01: RNCC: 3 | RNVC: 2

13 Mar 1997

5975-01-444-0372
Electrical Equipment Rack

014440372
10488-1150-02: RNCC: 3 | RNVC: 2

25 Apr 1997

5975-01-443-3053
Blank Panel

014433053
40102A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-444-2399
Electrical-Electronic Equipment Panel

014442399
MP109029001: RNCC: 3 | RNVC: 9
B12: RNCC: 5 | RNVC: 9
MP109029001: RNCC: C | RNVC: 1

1 May 1997

5975-01-198-3590
Sight Glass

011983590
028-00778: RNCC: 3 | RNVC: 2
28-778K: RNCC: 5 | RNVC: 9

7 Jan 1985

5975-01-435-1433
Cable Marker Sleeve

014351433
M235A774-85: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-458-0927
Junction Box

014580927
5972230-1: RNCC: 3 | RNVC: 2

13 Aug 1998

5975-01-459-6711
Electrical Equipment Mounting Base

014596711
595-387172-C: RNCC: 3 | RNVC: 2
595-387172-C: RNCC: 5 | RNVC: 9

9 Oct 1998

5975-01-081-5895
Electrical Equipment Rack

010815895
41666-1: RNCC: 3 | RNVC: 2
353D383G01: RNCC: 5 | RNVC: 2
353D383G01: RNCC: 5 | RNVC: 9
41666-1: RNCC: 5 | RNVC: 9

17 Aug 1979

5975-00-970-2633
Rigid Metal Conduit Assembly

009702633
NAF1150-3A24: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-440-6382
Electrical Equipment Rack

014406382
5498161-1: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-01-441-1389
Electrical Box Connector

014411389
02-31-D24-05: RNCC: 3 | RNVC: 2

4 Feb 1997

5975-01-438-6478
Junction Box Assembly

014386478
3329402-1: RNCC: 3 | RNVC: 2

14 Nov 1996

5975-00-797-3069
Electrical Equipment Rack

007973069
CE186993-9: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-2948
Electrical Equipment Rack

007972948
CE186992-13: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-3089
Electrical Equipment Rack

007973089
CE186993-11: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-437-2508
Ground Rod

014372508
001-ROD-04P: RNCC: 3 | RNVC: 2
001-ROD-04P: RNCC: 5 | RNVC: 9

8 Oct 1996

5975-01-438-6476
Junction Box Cover

014386476
3329399-7: RNCC: 3 | RNVC: 2

14 Nov 1996

5975-01-185-5248
Electrical Conduit Adapter

011855248
13053999: RNCC: 3 | RNVC: 2

30 Jul 1984

5975-01-356-8187
Plate Light

013568187
2926576-1: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-00-755-3207
Electrical Box Connector

007553207
9053529: RNCC: 3 | RNVC: 2
10-37095-14: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-435-1438
Cable Marker Sleeve

014351438
M235A774-104: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-00-447-1053
Blank Panel

004471053
53-81045-9: RNCC: 3 | RNVC: 2

30 Dec 1970

5975-00-851-1842
Electrical Box Connector

008511842
9053529-2: RNCC: 3 | RNVC: 2
10-262114-141: RNCC: 5 | RNVC: 2

16 Jan 1967

5975-01-309-2164
Electrical Equipment Mounting Base

013092164
92211S: RNCC: 3 | RNVC: 2

13 Oct 1989

5975-00-782-8890
Cross Bar Assembly

007828890
SM-C-508645: RNCC: 3 | RNVC: 2
SM-C-508645: RNCC: 5 | RNVC: 2

12 Apr 1972

5975-01-434-1107
Guide Rail

014341107
RC11092-20: RNCC: 3 | RNVC: 2
9D0092-20: RNCC: 5 | RNVC: 2

20 Jul 1996

5975-01-435-1435
Cable Marker Sleeve

014351435
M235A774-89: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-433-8836
Electrical-Electronic Equipment Chassis

014338836
VXP-C1: RNCC: 3 | RNVC: 2

12 Jul 1996

5975-01-434-7433
Cable Marker Sleeve

014347433
M23A774-95: RNCC: 3 | RNVC: 2

6 Aug 1996

5975-00-844-5073
Raceway Connector

008445073
PC412800042F1: RNCC: 3 | RNVC: 2
5790: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-434-2022
Electrical Equipment Mounting Base

014342022
047-07531-0000: RNCC: 3 | RNVC: 2

23 Jul 1996

5975-01-433-0744
Junction Box

014330744
9282068-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-307-1659
Electrical-Electronic Equipment Chassis

013071659
51539-300: RNCC: 3 | RNVC: 2

7 Sep 1989

5975-00-773-6207
Mast Cap

007736207
MP8: RNCC: 3 | RNVC: 2
RLD5299ITEM1: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-362-3183
Electrical Components Tie Down Strap

013623183
08354: RNCC: 3 | RNVC: 2
3311010: RNCC: 5 | RNVC: 9

4 Aug 1992

5975-01-362-7636
Cable Marker Sleeve

013627636
75A892600-2413: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-01-302-8055
Rigid Metal Conduit

013028055
212-001-206-1: RNCC: 3 | RNVC: 2

20 Jun 1989

5975-01-303-6768
Electrical Components Tie Down Strap

013036768
696-40527-8-4: RNCC: 3 | RNVC: 2
696-40527-8-4-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-303-6758
Electrical Components Tie Down Strap

013036758
696-40527-1-9: RNCC: 3 | RNVC: 2
696-40527-1-9-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-302-1713
Electrical Equipment Rack

013021713
3525075-131: RNCC: 3 | RNVC: 2

10 Jun 1989

5975-01-301-5316
Electrical Equipment Rack

013015316
85900A: RNCC: 3 | RNVC: 2

31 May 1989

5975-01-303-6753
Electrical Components Tie Down Strap

013036753
696-40527-5-2: RNCC: 3 | RNVC: 2
696-40527-5-2-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-00-842-5247
Electrical Components Tie Down Strap

008425247
MS17821-4-5: RNCC: 2 | RNVC: 2
TY23M4: RNCC: 5 | RNVC: 1
915-4-98207-106: RNCC: 5 | RNVC: 2
915-4-98207-106: RNCC: 5 | RNVC: 9

23 Dec 1966

5975-00-842-5248
Electrical Components Tie Down Strap

008425248
MS17821-4-3: RNCC: 2 | RNVC: 2
TY23M3: RNCC: 5 | RNVC: 1

23 Dec 1966

5975-00-489-4793
Band-Wire Harness

004894793
49210: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-356-7827
Electrical-Electronic Equipment Panel

013567827
5543291: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-357-9385
Electrical Box Connector

013579385
040-3302: RNCC: 3 | RNVC: 2

5 May 1992

5975-01-299-0227
Electrical Equipment Drawer

012990227
4186830: RNCC: 3 | RNVC: 2
4186830: RNCC: 8 | RNVC: 1

24 Apr 1989

5975-01-239-4207
Electrical-Electronic Equipment Chassis

012394207
520001-02-01: RNCC: 3 | RNVC: 2

29 Aug 1986

5975-01-246-1452
Electrical Equipment Cabinet

012461452
6000-3110-01: RNCC: 3 | RNVC: 2

10 Dec 1986

5975-01-042-8687
Blank Panel

010428687
0N152126: RNCC: 3 | RNVC: 2

17 Jun 1977

5975-01-354-3073
Sub-Assembly Panel

013543073
414E3028-9: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-01-356-8227
Barrel Right Angle

013568227
778-9008-001: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-297-9755
Electrical-Electronic Equipment Chassis

012979755
0002-3610: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-296-8184
Electrical Conduit Tee

012968184
1643679: RNCC: 3 | RNVC: 2

24 Mar 1989

5975-01-332-4139
Electrical Equipment Rack

013324139
1815-4: RNCC: 3 | RNVC: 2

11 Jan 1991

5975-00-838-6698
Flexible Nonmetallic Conduit

008386698
4823438-1: RNCC: 3 | RNVC: 2

12 Dec 1966

5975-01-197-0454
Electrical Components Tie Down Strap

011970454
TY-234MX: RNCC: 3 | RNVC: 2

18 Dec 1984

5975-01-352-4713
Electrical Equipment Cabinet

013524713
2417: RNCC: 3 | RNVC: 9
2417: RNCC: C | RNVC: 1

27 Jan 1992

5975-01-351-9751
Electrical-Electronic Equipment Panel

013519751
3750886-100: RNCC: 3 | RNVC: 2

17 Jan 1992

5975-01-351-4762
Electrical Equipment Mounting Base

013514762
708668-2: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-353-0343
Electrical Nonmetallic Conduit Assembly

013530343
5497312-79: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-00-438-7009
Electrical-Electronic Equipment Chassis

004387009
11074291: RNCC: 3 | RNVC: 2

5 Dec 1969

5975-01-328-5922
Conduit

013285922
200266-0012: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-328-7481
Cable Terminal Chamber

013287481
6187-2: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-324-1490
Blank Panel

013241490
34-062050-01: RNCC: 3 | RNVC: 2
34-062050-01: RNCC: 5 | RNVC: 9

11 Aug 1990

5975-01-324-5967
Cable Hanger

013245967
4052T74G02: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-324-1657
Electrical Equipment Mounting Base

013241657
622-8122-001: RNCC: 3 | RNVC: 2
MT-6792/ARC-217 80058(V): RNCC: 5 | RNVC: 2

11 Aug 1990

5975-01-324-5968
Cable Hanger

013245968
4069T70G01: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-00-888-4661
Rigid Metal Conduit Assembly

008884661
NAF1150-3AB96: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-838-4922
Ball Bushing

008384922
41262: RNCC: 3 | RNVC: 9

9 Dec 1966

5975-01-336-1178
Electrical-Electronic Equipment Chassis

013361178
ISBC660: RNCC: 3 | RNVC: 9

20 Mar 1991

5975-01-336-7695
Electrical Equipment Mounting Base

013367695
9182-1921-04: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-335-6546
Electrical Equipment Rack

013356546
86421430-1: RNCC: 3 | RNVC: 2
86421430-1: RNCC: 5 | RNVC: 2

12 Mar 1991

5975-01-336-7243
Switch Terminal Cover

013367243
179121-5: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-336-8016
Dead-End Glas-Grip

013368016
KDE-1107: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-047-7589
Structure Assembly

010477589
72D085510-2189: RNCC: 3 | RNVC: 2

13 Sep 1977

5975-01-050-7785
Electrical Components Tie Down Strap

010507785
MS3368-4-4D: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
5975PL0929605: RNCC: 6 | RNVC: 9

13 Nov 1977

5975-01-060-2559
Cable Marker Sleeve

010602559
ST650713A19P37: RNCC: 3 | RNVC: 2

18 May 1978

5975-01-231-8966
Electrical-Electronic Equipment Chassis

012318966
34-055282-01: RNCC: 3 | RNVC: 2
34-055282-01: RNCC: 5 | RNVC: 9

6 May 1986

5975-01-334-5437
Electrical-Electronic Equipment Chassis

013345437
648Z1279-2: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-333-5981
Protective Cover

013335981
DAA3383F097-001: RNCC: 3 | RNVC: 2

7 Feb 1991

5975-01-334-5439
Electrical-Electronic Equipment Chassis

013345439
648Z1325-1: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-335-6559
Blank Panel

013356559
86511681-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-060-8967
Electrical-Electronic Equipment Chassis

010608967
4027120-901: RNCC: 3 | RNVC: 2

4 Jun 1978

5975-01-067-6389
Electrical Conductor Bushing

010676389
119-0240-000-009: RNCC: 3 | RNVC: 2
755090A0762-1: RNCC: 5 | RNVC: 9

4 Nov 1978

5975-01-315-0024
Electrical Equipment Mounting Base

013150024
622-5212-003: RNCC: 3 | RNVC: 2
706A35-402-021: RNCC: 5 | RNVC: 2
622-5212-003: RNCC: 5 | RNVC: 2
UMT-12: RNCC: 5 | RNVC: 2

9 Feb 1990

5975-01-316-4324
Electrical-Electronic Equipment Panel

013164324
230141-21-3: RNCC: 3 | RNVC: 9
230141-21-3: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-01-320-0498
Junction Box Cover

013200498
SM-D-852138: RNCC: 3 | RNVC: 2

18 May 1990

5975-00-845-2097
Electrical Equipment Cabinet

008452097
M00: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-01-332-0443
Electrical-Electronic Equipment Panel

013320443
5-15551: RNCC: 3 | RNVC: 2
5019846-002: RNCC: 5 | RNVC: 2

2 Jan 1991

5975-01-329-5723
Electrical Equipment Mounting Base

013295723
MI585278: RNCC: 3 | RNVC: 2

19 Nov 1990

5975-01-330-4310
Conduit Outlet Cover

013304310
MK500-78: RNCC: 3 | RNVC: 2

4 Dec 1990

5975-01-332-0387
Electrical Nonmetallic Conduit Assembly

013320387
625-2883-001: RNCC: 3 | RNVC: 2

2 Jan 1991

5975-01-331-4296
Electrical Grounding Plate

013314296
0050430610: RNCC: 3 | RNVC: 2
5043-6: RNCC: 5 | RNVC: 9

20 Dec 1990

5975-01-046-8117
Junction Box

010468117
18910350000: RNCC: 3 | RNVC: 2

23 Aug 1977

5975-01-326-6504
Wiring Duct

013266504
E.5X.5LG6: RNCC: 3 | RNVC: 2

28 Sep 1990

5975-01-326-6205
Electrical Cable Protector

013266205
3491235: RNCC: 3 | RNVC: 2

27 Sep 1990

5975-01-161-4660
Electrical-Electronic Equipment Chassis

011614660
646R589G01: RNCC: 3 | RNVC: 2

6 Sep 1983

5975-01-161-4659
Electrical-Electronic Equipment Chassis

011614659
682R726G01: RNCC: 3 | RNVC: 2

6 Sep 1983

5975-01-163-0464
Electrical Conductor Bushing

011630464
0N518310-1: RNCC: 3 | RNVC: 2

27 Sep 1983

5975-01-264-5424
Electrical Equipment Cabinet

012645424
0N393056: RNCC: 3 | RNVC: 2
CY-8542/G: RNCC: 5 | RNVC: 2

2 Oct 1987

5975-01-322-1605
Rigid Metal Conduit Assembly

013221605
7-44750-295: RNCC: 3 | RNVC: 2

29 Jun 1990

5975-01-323-0427
Electrical-Electronic Equipment Chassis

013230427
519.786: RNCC: 3 | RNVC: 2
519.786: RNCC: 5 | RNVC: 2
FH20-C/1: RNCC: 5 | RNVC: 9
FH20C: RNCC: 5 | RNVC: 9

19 Jul 1990

5975-01-144-6132
Kit Cap Ay

011446132
496-896-9274: RNCC: 3 | RNVC: 2
226: RNCC: 5 | RNVC: 9

27 Dec 1982

5975-01-144-9400
Electrical Conduit Coupling

011449400
E940G: RNCC: 3 | RNVC: 9
00034481061045: RNCC: 5 | RNVC: 9

31 Dec 1982

5975-01-259-9678
Electrical Equipment Cabinet

012599678
H9602-DH: RNCC: 3 | RNVC: 2

24 Jul 1987

5975-01-084-0977
Electrical Components Tie Down Strap

010840977
TF5: RNCC: 3 | RNVC: 2
T50R: RNCC: 3 | RNVC: 2
WIT-50R-MIL: RNCC: 3 | RNVC: 2
TF5: RNCC: 5 | RNVC: 2
307339-4: RNCC: 5 | RNVC: 2
10-50R: RNCC: 5 | RNVC: 9
TF5: RNCC: 5 | RNVC: 9
WIT-50R: RNCC: 5 | RNVC: 9
094787-0004: RNCC: 7 | RNVC: 2

9 Oct 1979

5975-01-086-4487
Electrical Components Tie Down Strap

010864487
10S300-2-131: RNCC: 3 | RNVC: 9
10S300-2-131: RNCC: C | RNVC: 1

29 Nov 1979

5975-01-087-7582
Electrical Equipment Drawer

010877582
908D721G02: RNCC: 3 | RNVC: 1
908D721G02TR: RNCC: 5 | RNVC: 2
908D721G02: RNCC: 5 | RNVC: 9

25 Dec 1979

5975-01-355-1598
Junction Box

013551598
AB-18126HC: RNCC: 3 | RNVC: 2

12 Mar 1992

5975-01-026-2427
Electrical Components Tie Down Strap

010262427
PLT1-51C: RNCC: 3 | RNVC: 2
A29061: RNCC: 5 | RNVC: 2
PLT1-5ICP: RNCC: 5 | RNVC: 9
10134321: RNCC: 6 | RNVC: 9

19 Aug 1976

5975-01-034-7402
Electrical Equipment Rack

010347402
800R1-1: RNCC: 3 | RNVC: 2

30 Jan 1977

5975-01-141-6531
Electrical Equipment Rack

011416531
K103: RNCC: 3 | RNVC: 9
806742-15: RNCC: 5 | RNVC: 2
2001A2-K103: RNCC: 5 | RNVC: 9

3 Nov 1982

5975-01-213-8975
Wall Mount

012138975
NLN4127A: RNCC: 3 | RNVC: 9

2 Aug 1985

5975-01-258-6759
Electrical Conduit Locknut

012586759
K59-0040: RNCC: 3 | RNVC: 2

6 Jul 1987

5975-01-256-2280
Electrical Components Tie Down Strap

012562280
PLTIM-M76: RNCC: 3 | RNVC: 2

3 Jun 1987

5975-01-259-5236
Blade

012595236
8000-417W: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-259-5221
Blade

012595221
8000-417F: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-120-6083
Electrical-Electronic Equipment Chassis

011206083
842107-4: RNCC: 3 | RNVC: 2
842107-4: RNCC: 5 | RNVC: 2

22 Oct 1981

5975-01-122-9252
Electrical Components Tie Down Strap

011229252
10S300-2-109: RNCC: 3 | RNVC: 9
10S300-2-109: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-348-8854
Interconnecting Box

013488854
978583-105: RNCC: 3 | RNVC: 2

19 Nov 1991

5975-01-349-3076
Flexible Metal Conduit

013493076
010100-HP1250: RNCC: 3 | RNVC: 2
101-1250: RNCC: 5 | RNVC: 9

23 Nov 1991

5975-01-349-9158
Electrical-Electronic Equipment Panel

013499158
3661908-1: RNCC: 3 | RNVC: 2

6 Dec 1991

5975-01-350-3420
Electrical-Electronic Equipment Panel

013503420
0N363356-502: RNCC: 3 | RNVC: 2

13 Dec 1991

5975-01-353-0252
Electrical-Electronic Equipment Chassis

013530252
1166131-1: RNCC: 3 | RNVC: 9
1166131-1: RNCC: C | RNVC: 1

5 Feb 1992

5975-00-563-7591
Junction Box

005637591
456056-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-206-8864
Electrical Cable Nipple

012068864
1-1464-07: RNCC: 3 | RNVC: 9

24 Apr 1985

5975-01-208-9342
Stored Cables Cover

012089342
10178479-5: RNCC: 3 | RNVC: 2
EC1024685: RNCC: 5 | RNVC: 9

21 May 1985

5975-01-114-8016
Electrical-Electronic Equipment Chassis

011148016
11781631: RNCC: 3 | RNVC: 2
8680197-501: RNCC: 5 | RNVC: 2
8680197-501: RNCC: 5 | RNVC: 9

23 Jun 1981

5975-01-348-3712
Electrical Equipment Cabinet

013483712
NP1-4017: RNCC: 3 | RNVC: 9

8 Nov 1991

5975-01-345-7907
Electrical Conduit Adapter

013457907
151469-0001/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-348-2227
Receptacle Cover

013482227
E98GDR: RNCC: 3 | RNVC: 9

6 Nov 1991

5975-01-347-5452
Junction Box

013475452
275 SL: RNCC: 3 | RNVC: 2

24 Oct 1991

5975-00-565-3044
Metal Condu T Assy

005653044
10209: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-187-0808
Diode Mtg Plate

011870808
857006-1: RNCC: 3 | RNVC: 2

17 Aug 1984

5975-01-110-2451
Electrical Box Connector

011102451
FSH-2: RNCC: 3 | RNVC: 2

28 Mar 1981

5975-01-110-0809
Conduit Assy

011100809
1310-0001-6: RNCC: 3 | RNVC: 2
1310-0001-6: RNCC: 3 | RNVC: 9

26 Mar 1981

5975-01-342-1007
Cable Strain Relief Bushing

013421007
H1400W: RNCC: 3 | RNVC: 9

16 Jul 1991

5975-01-341-3718
Electrical-Electronic Equipment Chassis

013413718
30277-101: RNCC: 3 | RNVC: 2

27 Jun 1991

5975-01-343-4988
Flexible Metal Conduit Assembly

013434988
NAF1150-8AC392: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-342-0986
Junction Box Cover

013420986
770: RNCC: 3 | RNVC: 9

16 Jul 1991

5975-01-342-1569
Electrical Components Tie Down Strap

013421569
PLT2SM9: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-2248
Cable Ladder

013422248
12-1200-120: RNCC: 3 | RNVC: 9

17 Jul 1991

5975-01-342-6041
Cable Marker Sleeve

013426041
651036-132: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-9565
Electrical Equipment Cabinet

013429565
7161631-02: RNCC: 3 | RNVC: 2

2 Aug 1991

5975-01-343-4568
Electrical Box Connector

013434568
3625497: RNCC: 3 | RNVC: 2
3625497: RNCC: 5 | RNVC: 2
3625497: RNCC: 5 | RNVC: 2

14 Aug 1991

5975-01-344-2235
Electrical Cable Assembly Protector

013442235
2688-7547: RNCC: 3 | RNVC: 9

24 Aug 1991

5975-01-345-7914
Electrical Conduit Adapter

013457914
C200AC1016AA/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-343-9929
Cable Spacer

013439929
25931-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-345-7908
Electrical Conduit Adapter

013457908
151469-0005/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-7918
Electrical Conduit Elbow

013457918
C196AX1110DA/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-346-1253
Electrical-Electronic Equipment Chassis

013461253
34-032126-101: RNCC: 3 | RNVC: 2
34-032126-101: RNCC: 5 | RNVC: 9

27 Sep 1991

5975-00-545-0507
Ignition Cab Marker

005450507
AN4028-9: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-01-180-9476
Electrical Components Tie Down Strap

011809476
TYH23M: RNCC: 3 | RNVC: 2
9560120560: RNCC: 5 | RNVC: 2
555502520431: RNCC: 5 | RNVC: 2
0232909K00: RNCC: 5 | RNVC: 2
1BK-507213: RNCC: 5 | RNVC: 2

5 Jun 1984

5975-01-340-2665
Electrical Components Tie Down Strap

013402665
506657-6: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2676
Electrical Components Tie Down Strap

013402676
506657-27: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2572
Electrical Equipment Drawer

013402572
790-1572-001: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-3860
Junction Box

013403860
AB-664GSB: RNCC: 3 | RNVC: 2

12 Jun 1991

5975-01-341-1626
Electrical-Electronic Equipment Panel

013411626
CCA-01695: RNCC: 3 | RNVC: 2
002593549 SHEET 036: RNCC: 5 | RNVC: 2
002593549/036: RNCC: 5 | RNVC: 2
CCA-01695: RNCC: 5 | RNVC: 9

25 Jun 1991

5975-01-339-3732
Flexible Metal Conduit Assembly

013393732
90151-104: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-340-2672
Electrical Components Tie Down Strap

013402672
506657-30: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-339-8355
Junction Box Cover

013398355
RSL-13: RNCC: 3 | RNVC: 2

2 Jun 1991

5975-01-340-1376
Cable Marker Sleeve

013401376
506657-13: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2891
Cable Marker Sleeve

013402891
506658-17: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-339-7182
Electrical Components Tie Down Strap

013397182
PRT6EH-Q-100: RNCC: 3 | RNVC: 2
352250042373: RNCC: 5 | RNVC: 2

28 May 1991

5975-01-341-1041
Electrical Conduit Elbow

013411041
407533: RNCC: 3 | RNVC: 2
407533: RNCC: 5 | RNVC: 9

25 Jun 1991

5975-01-179-6208
Flexible Metal Conduit

011796208
EF1/2GREY: RNCC: 3 | RNVC: 2
EFSEALTITE 1/2 INGREY: RNCC: 3 | RNVC: 2
781342-36211: RNCC: 3 | RNVC: 2

19 May 1984

5975-01-159-7384
Electrical Equipment Cabinet

011597384
70-14974-01: RNCC: 3 | RNVC: 2

13 Aug 1983

5975-01-110-0812
Conduit Assy

011100812
1310-0001-1: RNCC: 3 | RNVC: 2
1310-0001-1: RNCC: 3 | RNVC: 9

26 Mar 1981

5975-01-076-1497
Junction Box

010761497
JALX-11: RNCC: 3 | RNVC: 2
JALX-10: RNCC: 3 | RNVC: 2

2 May 1979

5975-01-110-8351
Outlet Box Base

011108351
X236358: RNCC: 3 | RNVC: 9

7 Apr 1981

5975-01-110-0808
Conduit Assy

011100808
1310-0001-7: RNCC: 3 | RNVC: 2
1310-0001-7: RNCC: 3 | RNVC: 9

26 Mar 1981

5975-01-110-0818
Conduit

011100818
C14: RNCC: 3 | RNVC: 9

26 Mar 1981

5975-01-110-5077
Magnetic Starter

011105077
GCR00DC0J: RNCC: 3 | RNVC: 9

2 Apr 1981

5975-01-338-8963
Electrical Conduit Coupling Nut Clamp

013388963
332-0051: RNCC: 3 | RNVC: 2

12 May 1991

5975-01-110-8425
Electrical Conduit Bushing

011108425
374120-1: RNCC: 3 | RNVC: 2
374120-1: RNCC: 5 | RNVC: 2
374120-1: RNCC: 5 | RNVC: 9

7 Apr 1981

5975-01-132-6176
Wire Marker Books

011326176
PCMB-8: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-00-864-5267
Electrical Wall Plate

008645267
10-21V: RNCC: 3 | RNVC: 2
92072: RNCC: 3 | RNVC: 2
92072: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-878-9833
Switch Terminal Cover

008789833
A145SC9: RNCC: 3 | RNVC: 2
9018941: RNCC: 5 | RNVC: 1
A145SC9: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-488-7780
Electrical Conduit Ferrule

004887780
111-0375P: RNCC: 3 | RNVC: 2
111-0375P: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-109-9602
Switch Mounti Plate

011099602
R772293: RNCC: 3 | RNVC: 9

25 Mar 1981

5975-01-105-0981
Electrical Equipment Cabinet

011050981
57977-40010: RNCC: 3 | RNVC: 2

17 Dec 1980

5975-01-113-5882
Electrical Box Connector

011135882
7286: RNCC: 3 | RNVC: 2

30 May 1981

5975-01-141-6886
Electrical Tote Box

011416886
4415: RNCC: 3 | RNVC: 9
4415: RNCC: 5 | RNVC: 9
98-0798-0330-4: RNCC: 5 | RNVC: 9
98-0798-0330-4: RNCC: 5 | RNVC: 9
4415: RNCC: 5 | RNVC: 9
98-0798-0330-4: RNCC: 5 | RNVC: 9
7100137911: RNCC: C | RNVC: 1

3 Nov 1982

5975-01-141-0103
Blank Panel

011410103
619-6100-001: RNCC: 3 | RNVC: 2

22 Oct 1982

5975-01-142-4183
Electrical Components Tie Down Strap

011424183
SST1MX30: RNCC: 3 | RNVC: 2

15 Nov 1982

5975-01-347-9589
Junction Box

013479589
E980EF: RNCC: 3 | RNVC: 9

1 Nov 1991

5975-01-348-0909
Electrical-Electronic Equipment Chassis

013480909
8030003001-1: RNCC: 3 | RNVC: 9

4 Nov 1991

5975-01-349-2856
Electrical Conduit Ferrule

013492856
187404-FB5000: RNCC: 3 | RNVC: 2
119-1-1250: RNCC: 5 | RNVC: 9

23 Nov 1991

5975-01-348-6127
Electrical-Electronic Equipment Panel

013486127
10122-3505: RNCC: 3 | RNVC: 2

14 Nov 1991

5975-01-140-0760
Cable Marker Sleeve

011400760
TMS-SCE-1/4-2.0-9: RNCC: 3 | RNVC: 1
215511T88: RNCC: 5 | RNVC: 2
RNF-100-1/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T88: RNCC: 7 | RNVC: 2

7 Oct 1982

5975-01-190-0175
Electrical Grounding Plate

011900175
00920-22002: RNCC: 3 | RNVC: 2
00920-22002: RNCC: 3 | RNVC: 9
00920-22002: RNCC: 5 | RNVC: 9
00920-22002: RNCC: 5 | RNVC: 9

22 Sep 1984

5975-01-347-0262
Electrical Conduit Elbow

013470262
C206AX1212DA/18: RNCC: 3 | RNVC: 2

13 Oct 1991

5975-01-346-6080
Electrical Equipment Mounting Base

013466080
622-3960-001: RNCC: 3 | RNVC: 2
673821-103: RNCC: 5 | RNVC: 9

9 Oct 1991

5975-01-347-0101
Switch Terminal Cover

013470101
031282: RNCC: 3 | RNVC: 2

13 Oct 1991

5975-01-347-3257
Electrical-Electronic Equipment Chassis

013473257
8040003363-53: RNCC: 3 | RNVC: 9

19 Oct 1991

5975-01-345-9198
Switch Box Case

013459198
025470-11: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-7226
Electrical Equipment Mounting Base

013457226
TC4501MK: RNCC: 3 | RNVC: 2
TC4501MK: RNCC: 5 | RNVC: 9

24 Sep 1991

5975-01-347-0261
Electrical Conduit Adapter

013470261
C004AC1216AA/18: RNCC: 3 | RNVC: 2

13 Oct 1991

5975-01-345-7538
Electrical Conduit Ferrule

013457538
AN3051-28: RNCC: 2 | RNVC: 2

24 Sep 1991

5975-01-345-7548
Electrical Cable Protector

013457548
GC2-32000514: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-7909
Electrical Conduit Adapter

013457909
151465/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-011-2570
Electrical Wiring Duct Filler Shim

010112570
0N125052: RNCC: 3 | RNVC: 2

20 Oct 1975

5975-01-011-5250
Tlscp Slide

010115250
1502737L: RNCC: 3 | RNVC: 2
7903159-00: RNCC: 5 | RNVC: 2

23 Oct 1975

5975-01-013-9247
Electrical Components Tie Down Strap

010139247
G-8: RNCC: 3 | RNVC: 2
153-1143-002: RNCC: 5 | RNVC: 9

10 Dec 1975

5975-01-342-6042
Cable Marker Sleeve

013426042
651036-133: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6061
Cable Strain Relief Bushing

013426061
1523: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6043
Cable Marker Sleeve

013426043
651036-134: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-343-4978
Flexible Metal Conduit Assembly

013434978
NAF1150-3AB328: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-9343
Electrical-Electronic Equipment Chassis

013439343
765304-2: RNCC: 3 | RNVC: 2

20 Aug 1991

Load More Results