What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 172 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 172 of 176

5975-01-692-5387
Underground Cable Rack

016925387
DSL55GRIP: RNCC: 3 | RNVC: 9
DSL5SGRIP: RNCC: 5 | RNVC: 2

21 Dec 2020

5975-01-693-7903
Electrical-Electronic Equipment Chassis

016937903
POWEREDGE MX7000: RNCC: 3 | RNVC: 2

5 Mar 2021

5975-01-694-5859
Electrical Equipment Mounting Base

016945859
FORAX-SYN-ACHASSIS-2REGLINK: RNCC: 3 | RNVC: 2

12 Apr 2021

5975-01-696-1743
Electrical Equipment Cabinet Case

016961743
RJ1412HPL: RNCC: 3 | RNVC: 2

14 Jul 2021

5975-01-136-6882
Electrical Components Tie Down Strap

011366882
TYB23M8: RNCC: 3 | RNVC: 2
1400-0249: RNCC: 7 | RNVC: 2

13 Aug 1982

5975-01-525-0870
Electrical Cable Nipple

015250870
1-737893-7: RNCC: 3 | RNVC: 2
1-737893-7: RNCC: 5 | RNVC: 2
5-737893-7: RNCC: 5 | RNVC: 2

27 Oct 2004

5975-01-525-5387
Electrical Equipment Rack

015255387
16E3165-211: RNCC: 3 | RNVC: 2

15 Nov 2004

5975-01-690-6571
Line Supporting Strap

016906571
102001: RNCC: 3 | RNVC: 2

25 Aug 2020

5975-01-690-6211
Electrical Equipment Rack

016906211
010M056-001: RNCC: 3 | RNVC: 2

24 Aug 2020

5975-01-690-9574
Mounting Plate

016909574
PA-1136MG: RNCC: 3 | RNVC: 2

11 Sep 2020

5975-01-692-5027
Electrical Components Tie Down Strap

016925027
AC-19024-0007-01: RNCC: 3 | RNVC: 2

17 Dec 2020

5975-00-992-9041
Receptacle Coveer Kit

009929041
792460-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-523-4600
Junction Box

015234600
A23-RCJB: RNCC: 3 | RNVC: 2

3 Sep 2004

5975-00-518-4801
Blank Panel

005184801
MX1125G: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-687-2254
Junction Box

016872254
S100-2A6-3: RNCC: 3 | RNVC: 2

24 Mar 2020

5975-01-687-2575
Electrical Equipment Mounting Base

016872575
844E1331-101: RNCC: 3 | RNVC: 2

25 Mar 2020

5975-01-688-1784
Electrical Equipment Rack

016881784
EDV-01277: RNCC: 3 | RNVC: 2

6 May 2020

5975-01-689-7640
Electrical Conduit Elbow

016897640
55817: RNCC: 3 | RNVC: 2

9 Jul 2020

5975-01-689-9491
Electrical Equipment Shelf

016899491
7-511113596-101: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-685-6909
Electrical Equipment Rack

016856909
16E1703-1: RNCC: 3 | RNVC: 2
16E1703-1: RNCC: 5 | RNVC: 2

8 Jan 2020

5975-01-688-2459
Electrical Cable Nipple

016882459
A107-0017: RNCC: 3 | RNVC: 2

8 May 2020

5975-01-687-7235
Electrical Components Tie Down Strap

016877235
YLS-4.6-200BC: RNCC: 3 | RNVC: 2

15 Apr 2020

5975-01-688-9883
Electrical Components Tie Down Strap

016889883
823548T: RNCC: 3 | RNVC: 2
8M0064024: RNCC: 5 | RNVC: 2

2 Jun 2020

5975-01-687-7811
Electrical-Electronic Equipment Chassis

016877811
6DY78AV: RNCC: 3 | RNVC: 2

17 Apr 2020

5975-01-124-7394
Hold Down Bushing

011247394
621-0413-001: RNCC: 3 | RNVC: 2

11 Jan 1982

5975-01-521-3635
Electrical-Electronic Equipment Chassis

015213635
G000809-20CR: RNCC: 3 | RNVC: 2

18 Jun 2004

5975-01-521-8675
Electrical Fitting Mounting Base

015218675
7014803-901: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-01-521-1427
Electrical Equipment Cabinet

015211427
90380-40137-10: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-00-569-9714
Electrical Conduit Elbow

005699714
10-40681-16: RNCC: 3 | RNVC: 2
1755671: RNCC: 5 | RNVC: 2
S2620: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-682-5586
Cable Hanger

016825586
244106A-220: RNCC: 3 | RNVC: 2

13 Aug 2019

5975-01-684-2563
Electrical-Electronic Equipment Panel

016842563
PNL-M343: RNCC: 3 | RNVC: 2

28 Oct 2019

5975-01-683-6786
Electrical Tie Down Mounting Base

016836786
CB9297AA8N750: RNCC: 3 | RNVC: 2

2 Oct 2019

5975-01-686-0364
Interior Cable Rack

016860364
SRCABLERING1U: RNCC: 3 | RNVC: 2

28 Jan 2020

5975-01-685-7045
Electrical Equipment Cabinet

016857045
K10055555-2: RNCC: 3 | RNVC: 2

8 Jan 2020

5975-01-684-9186
Electrical Cable Support

016849186
3369066-3: RNCC: 3 | RNVC: 2

20 Nov 2019

5975-01-685-4538
Stuffing Tube Plug

016854538
AIO-CSJM22: RNCC: 3 | RNVC: 2

18 Dec 2019

5975-01-685-8490
Electrical-Electronic Equipment Chassis

016858490
RFE23050130-501: RNCC: 3 | RNVC: 2
RFE23050130-501: RNCC: 3 | RNVC: 9

15 Jan 2020

5975-01-685-4014
Electrical Equipment Shelf

016854014
D-4455: RNCC: 3 | RNVC: 2

16 Dec 2019

5975-01-682-5097
Electrical Tie Down Mounting Base

016825097
004F013480-1: RNCC: 3 | RNVC: 2

12 Aug 2019

5975-01-684-2852
Electrical Tie Down Mounting Base

016842852
CB4021G3NB24: RNCC: 3 | RNVC: 2

28 Oct 2019

5975-01-684-4543
Electrical Cable Support

016844543
CB9297AA5V750P: RNCC: 3 | RNVC: 2

4 Nov 2019

5975-01-685-1910
Cable Hanger

016851910
204-20083-9: RNCC: 3 | RNVC: 2

5 Dec 2019

5975-01-685-3441
Electrical Equipment Drawer

016853441
UPB86057-1: RNCC: 3 | RNVC: 2

12 Dec 2019

5975-01-193-0043
Cable Hanger

011930043
10671905: RNCC: 3 | RNVC: 2
10671905: RNCC: 5 | RNVC: 1

29 Oct 1984

5975-01-010-0109
Electrical-Electronic Equipment Chassis

010100109
65700-90404-101: RNCC: 3 | RNVC: 2

21 Sep 1975

5975-01-519-8244
Electrical Equipment Rack

015198244
220S: RNCC: 3 | RNVC: 2
220S: RNCC: 5 | RNVC: 9

3 May 2004

5975-01-520-5660
Electrical-Electronic Equipment Panel

015205660
A06A0971-6: RNCC: 3 | RNVC: 9

17 May 2004

5975-01-519-8895
Electrical Equipment Mounting Base

015198895
8200622G1: RNCC: 3 | RNVC: 2

5 May 2004

5975-00-518-4932
Electrical Equipment Rack

005184932
A17623: RNCC: 3 | RNVC: 2
MT1570GPX8: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-519-8599
Electrical Cable Nipple

005198599
7434252-6: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-578-2750
Electrical Conductor Bushing

005782750
PEM5: RNCC: 3 | RNVC: 2
139347: RNCC: 3 | RNVC: 2
MBV-125: RNCC: 5 | RNVC: 2
IB43: RNCC: 5 | RNVC: 9
BB125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-568-9713
Electrical Box Connector

005689713
5A49762: RNCC: 3 | RNVC: 9
5A49762: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-679-1284
Electrical-Electronic Equipment Chassis

016791284
CHAS-MX80-T-BB: RNCC: 3 | RNVC: 2
CHAS-MX80-T-BB: RNCC: 5 | RNVC: 2

8 Mar 2019

5975-01-679-5352
Electrical Equipment Cabinet

016795352
CB90980-001: RNCC: 3 | RNVC: 2

28 Mar 2019

5975-01-679-5556
Electronic Equipment Mounting Tray

016795556
H7B85A: RNCC: 3 | RNVC: 2

29 Mar 2019

5975-01-681-0407
Electronic Equipment Mounting Tray

016810407
1C8038: RNCC: 3 | RNVC: 2

3 Jun 2019

5975-01-680-7077
Electrical Conductor Bushing

016807077
447AL198NF1812LB: RNCC: 3 | RNVC: 2

17 May 2019

5975-01-678-5641
Electrical Equipment Rack

016785641
FX2-J1: RNCC: 3 | RNVC: 2

13 Feb 2019

5975-01-679-4537
Electrical-Electronic Equipment Chassis

016794537
MX80-48T-AC: RNCC: 3 | RNVC: 2
MX80-48T-AC: RNCC: 5 | RNVC: 2

25 Mar 2019

5975-01-425-0276
Electrical Equipment Rack

014250276
781R132G01: RNCC: 3 | RNVC: 2

9 Feb 1996

5975-01-190-9016
Electrical-Electronic Equipment Chassis

011909016
8070000144-1: RNCC: 3 | RNVC: 9

4 Oct 1984

5975-01-192-1302
Equipment Frame

011921302
0N311232: RNCC: 3 | RNVC: 2
MT-6391/FSQ-137: RNCC: 5 | RNVC: 2

17 Oct 1984

5975-01-516-5253
Rpi Base Assy

015165253
15400G1: RNCC: 3 | RNVC: 1

9 Jan 2004

5975-01-515-9852
Electrical Components Tie Down Strap

015159852
TY23M-9: RNCC: 3 | RNVC: 2

16 Dec 2003

5975-01-516-7454
Electrical Equipment Rack

015167454
7510707-968: RNCC: 3 | RNVC: 2

16 Jan 2004

5975-01-517-2529
Cable Hanger

015172529
6547E801-1: RNCC: 3 | RNVC: 2

3 Feb 2004

5975-01-518-2212
Blank Panel

015182212
6387654-9: RNCC: 3 | RNVC: 2

4 Mar 2004

5975-00-469-6057
Electrical-Electronic Equipment Panel

004696057
0N143358: RNCC: 3 | RNVC: 2

27 Feb 1972

5975-01-013-0735
Electrical-Electronic Equipment Chassis

010130735
230E944P1: RNCC: 3 | RNVC: 2

23 Nov 1975

5975-01-020-4270
Block Nut

010204270
7216574-00: RNCC: 3 | RNVC: 2

30 Apr 1976

5975-01-023-1964
Flexible Metal Conduit

010231964
UA SEALTITE 3/8 IN: RNCC: 3 | RNVC: 2

12 Jun 1976

5975-01-591-3414
Electrical Equipment Shelf

015913414
9967-6097: RNCC: 3 | RNVC: 2

21 Jan 2011

5975-01-592-4834
Transmission Line Grounding Set

015924834
09-9124-56: RNCC: 3 | RNVC: 2

8 Mar 2011

5975-01-592-3515
Electrical Tie Down Mounting Base

015923515
001-100057R00: RNCC: 3 | RNVC: 2

3 Mar 2011

5975-01-421-4474
Electrical-Electronic Equipment Panel

014214474
35-380133-25: RNCC: 3 | RNVC: 2
35-380133-25: RNCC: 3 | RNVC: 9

8 Nov 1995

5975-01-420-7241
Electrical Equipment Drawer

014207241
7N313: RNCC: 3 | RNVC: 1
7N313-1: RNCC: 5 | RNVC: 1

24 Oct 1995

5975-01-421-3976
Electrical Box Connector

014213976
LN43DA: RNCC: 3 | RNVC: 9
00034481043928: RNCC: 5 | RNVC: 9

7 Nov 1995

5975-01-422-8138
Electrical Equipment Mounting Base

014228138
300-2194-000: RNCC: 3 | RNVC: 9
706A35-402-094: RNCC: 5 | RNVC: 2

8 Dec 1995

5975-01-513-5557
Electrical Components Tie Down Strap

015135557
TYC25MX: RNCC: 3 | RNVC: 2
622-082: RNCC: 5 | RNVC: 2

29 Sep 2003

5975-01-516-1210
Electrical Equipment Drawer

015161210
8102700-01: RNCC: 3 | RNVC: 2

19 Dec 2003

5975-01-588-2785
Control Box Frame

015882785
549-3620-005: RNCC: 3 | RNVC: 2

10 Sep 2010

5975-01-588-5805
Electronic Equipment Mounting Tray

015885805
613253-6: RNCC: 3 | RNVC: 2
4038=055: RNCC: 5 | RNVC: 1

24 Sep 2010

5975-01-588-2985
Stuffing Tube Adapter

015882985
M24758-F: RNCC: 2 | RNVC: 1
MIL-PRF-24758: RNCC: 4 | RNVC: 1
M24758/1912A: RNCC: 5 | RNVC: 9

13 Sep 2010

5975-01-588-3967
Electrical Equipment Mounting Base

015883967
35584-10: RNCC: 3 | RNVC: 2
706A35402206: RNCC: 5 | RNVC: 2

15 Sep 2010

5975-01-589-3956
Electrical Components Tie Down Strap

015893956
PLT1.5I-M30: RNCC: 3 | RNVC: 2

25 Oct 2010

5975-01-590-0050
Electronic Equipment Mounting Tray

015900050
8520147-901: RNCC: 3 | RNVC: 2

12 Nov 2010

5975-01-590-6512
Electrical Equipment Rack

015906512
60022624+001: RNCC: 3 | RNVC: 2

14 Dec 2010

5975-01-419-1928
Sectiona Terminal Junction Block

014191928
9D0090-28U: RNCC: 3 | RNVC: 2
RC11090-28U: RNCC: 5 | RNVC: 2
9D0090-28U: RNCC: 5 | RNVC: 2
RC11090: RNCC: D | RNVC: 9

15 Sep 1995

5975-01-419-9073
Electrical-Electronic Equipment Chassis

014199073
751-7517-002: RNCC: 3 | RNVC: 2

3 Oct 1995

5975-01-420-5721
Junction Box Cover

014205721
65202-01006-104: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-00-215-3797
Electrical Conductor Bushing

002153797
8008426: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-587-7486
Electrical Equipment Rack

015877486
RN-X-2R/81M2-FA: RNCC: 3 | RNVC: 2
RN-X-2R/81M2-M: RNCC: 5 | RNVC: 9

19 Aug 2010

5975-01-417-8040
Electrical Cable Protector

014178040
9040461-22: RNCC: 3 | RNVC: 2

15 Aug 1995

5975-00-411-6207
Electrical Conduit Nipple

004116207
197B: RNCC: 3 | RNVC: 9

22 Aug 1969

5975-01-368-0687
Electrical Equipment Rack

013680687
9160584-03: RNCC: 1 | RNVC: 2
4695-30: RNCC: 3 | RNVC: 2

25 Nov 1992

5975-01-368-0688
Electrical Equipment Rack

013680688
9160584-01: RNCC: 1 | RNVC: 2
4695-31: RNCC: 3 | RNVC: 2

25 Nov 1992

5975-01-256-7211
Electrical-Electronic Equipment Chassis

012567211
2892903-1: RNCC: 3 | RNVC: 2

8 Jun 1987

5975-01-234-1624
Conduit Chase Nipple

012341624
7208889P005: RNCC: 3 | RNVC: 2

9 Jun 1986

5975-00-893-5443
Electrical Equipment Rack

008935443
10044030: RNCC: 3 | RNVC: 2
Y16148-1: RNCC: 5 | RNVC: 2

3 Feb 1967

5975-01-583-7195
Junction Box Assembly

015837195
92550-01827-104: RNCC: 3 | RNVC: 2

2 Apr 2010

5975-01-583-9704
Electrical Equipment Mounting Base

015839704
5406-02-0004: RNCC: 3 | RNVC: 2

13 Apr 2010

5975-01-584-5686
Electrical Conduit Adapter

015845686
710-818: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-585-4471
Metallic Raceway

015854471
62828-40198-10: RNCC: 3 | RNVC: 2

26 May 2010

5975-01-364-6735
Electrical Equipment Rack

013646735
4027120-903: RNCC: 3 | RNVC: 2

23 Sep 1992

5975-01-229-4967
Strain Electrical Conductor Clamp

012294967
G8801-15N: RNCC: 3 | RNVC: 2
FON9-4941-15N: RNCC: 5 | RNVC: 2
G8801-15N: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-01-237-2022
Electrical Equipment Rack

012372022
57977-40025-2: RNCC: 3 | RNVC: 2

26 Jul 1986

5975-00-252-6247
Junction Box

002526247
ZT56-84A-32: RNCC: 3 | RNVC: 2
MT1022-051-200: RNCC: 5 | RNVC: 9

19 Jun 1970

5975-01-581-5697
Junction Box Cover

015815697
915689-1: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-570-9927
Blank Panel

015709927
10122529-101: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-569-0893
Electrical-Electronic Equipment Chassis

015690893
310-5197-00: RNCC: 3 | RNVC: 2

19 Nov 2008

5975-01-363-5521
Electrical-Electronic Equipment Panel

013635521
80-0300-1H: RNCC: 3 | RNVC: 2

1 Sep 1992

5975-01-252-0247
Electrical Equipment Cabinet

012520247
0N333257-1(50HZ): RNCC: 3 | RNVC: 2
CY-8320(V)2/FYQ-107(V): RNCC: 5 | RNVC: 2

28 Mar 1987

5975-00-265-6667
Electrical Box Connector

002656667
SCD16576GPVIII: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-248-9516
Conduit Assembly Lh

002489516
68PA1244-7: RNCC: 3 | RNVC: 9

7 Nov 1969

5975-01-536-7396
Electrical-Electronic Equipment Chassis

015367396
361D814G01: RNCC: 3 | RNVC: 2
361D814G01: RNCC: 3 | RNVC: 9

12 Jan 2006

5975-01-495-8859
Electrical Conduit Tee

014958859
3250: RNCC: 3 | RNVC: 2

27 Mar 2002

5975-01-360-6835
Electrical Equipment Mounting Base

013606835
3494: RNCC: 3 | RNVC: 2

29 Jun 1992

5975-01-362-0425
Mounting Tray

013620425
730337-301: RNCC: 3 | RNVC: 2
730337-301: RNCC: 3 | RNVC: 9

1 Aug 1992

5975-01-214-1272
Junction Box Cover

012141272
300807: RNCC: 3 | RNVC: 2
5021-81: RNCC: 5 | RNVC: 2

6 Aug 1985

5975-01-218-3910
Plug And Adaptor As

012183910
10-00016-001: RNCC: 3 | RNVC: 2

11 Oct 1985

5975-01-243-2894
Flexible Metal Conduit

012432894
781342-36051: RNCC: 3 | RNVC: 2

24 Oct 1986

5975-01-244-0942
Electrical Wall Plate

012440942
600-A10364-002: RNCC: 3 | RNVC: 2

7 Nov 1986

5975-00-268-3818
Electrical Conductor Bushing

002683818
SCDL82924: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-263-0859
Junction Box

002630859
TA83FT: RNCC: 3 | RNVC: 2
H202: RNCC: 3 | RNVC: 2
MILJ10172: RNCC: 4 | RNVC: 1
H202: RNCC: 5 | RNVC: 9
H202: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-599-1815
Electronic Equipment Mounting Tray

015991815
M105035: RNCC: 3 | RNVC: 2
M105035: RNCC: 3 | RNVC: 9

14 Sep 2011

5975-01-599-5191
Electrical-Electronic Equipment Chassis

015995191
M123013: RNCC: 3 | RNVC: 2
M123013: RNCC: 3 | RNVC: 9

30 Sep 2011

5975-01-357-7622
Electrical Components Tie Down Strap

013577622
PLT1M-CP0: RNCC: 3 | RNVC: 2

30 Apr 1992

5975-01-358-9940
Electrical Conduit Adapter

013589940
710DS004B2020: RNCC: 3 | RNVC: 2

27 May 1992

5975-01-097-4359
Cable Marker Sleeve

010974359
322367-2: RNCC: 3 | RNVC: 2
322367-2: RNCC: 5 | RNVC: 9
322367-2: RNCC: 8 | RNVC: 2

11 Jul 1980

5975-01-099-1707
Cable Marker Sleeve

010991707
322367-6: RNCC: 3 | RNVC: 2
322367-6: RNCC: 5 | RNVC: 9
322367-6: RNCC: 8 | RNVC: 2

14 Aug 1980

5975-01-099-1708
Cable Marker Sleeve

010991708
322367-5: RNCC: 3 | RNVC: 2
322367-5: RNCC: 5 | RNVC: 9
322367-5: RNCC: 8 | RNVC: 2

14 Aug 1980

5975-01-589-7718
Electrical Bonding Ring

015897718
DHS1693B3DS: RNCC: 3 | RNVC: 2
DHS1693B3DS: RNCC: 3 | RNVC: 9

4 Nov 2010

5975-01-590-6372
Interconnecting Box

015906372
020848-DAGR: RNCC: 3 | RNVC: 2
10690048-001: RNCC: 7 | RNVC: 2

14 Dec 2010

5975-01-356-2268
Electrical-Electronic Equipment Panel

013562268
01-0200-00: RNCC: 3 | RNVC: 2

30 Mar 1992

5975-01-356-5492
Electrical Equipment Cabinet

013565492
1508277G1: RNCC: 3 | RNVC: 9
1508277G1: RNCC: 5 | RNVC: 2

7 Apr 1992

5975-01-086-5896
Electrical Conduit End Seal Cap

010865896
752-5079-001: RNCC: 3 | RNVC: 2

30 Nov 1979

5975-01-086-6651
Electrical Components Tie Down Strap

010866651
10S300-2-88: RNCC: 3 | RNVC: 9
10S300-2-88: RNCC: C | RNVC: 1

1 Dec 1979

5975-00-472-2445
Electrical-Electronic Equipment Chassis

004722445
775-9718-001: RNCC: 3 | RNVC: 2

3 Jun 1974

5975-00-392-5683
Junction Box Cover

003925683
5GCB: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-571-0421
Electrical-Electronic Equipment Chassis

015710421
03-06932-004: RNCC: 3 | RNVC: 2

22 Jan 2009

5975-01-442-9483
Electrical Equipment Rack

014429483
500-2216-000: RNCC: 3 | RNVC: 2
500-2216-000: RNCC: 5 | RNVC: 9

27 Mar 1997

5975-01-443-3992
Electrical-Electronic Equipment Chassis

014433992
3C05-ATX: RNCC: 3 | RNVC: 2

9 Apr 1997

5975-01-444-1402
Electrical-Electronic Equipment Panel

014441402
DZYC0543AB: RNCC: 3 | RNVC: 2

29 Apr 1997

5975-01-168-1888
Electrical-Electronic Equipment Chassis

011681888
3191916: RNCC: 3 | RNVC: 2

14 Dec 1983

5975-01-198-0424
Gauge

011980424
026-07110: RNCC: 3 | RNVC: 2
26-7110P: RNCC: 5 | RNVC: 9

4 Jan 1985

5975-01-085-9021
Electrical Nonmetallic Conduit Assembly

010859021
B910283-5600: RNCC: 3 | RNVC: 2

18 Nov 1979

5975-01-086-4485
Electrical Components Tie Down Strap

010864485
10S300-2-128: RNCC: 3 | RNVC: 9
10S300-2-128: RNCC: C | RNVC: 1

29 Nov 1979

5975-01-086-4488
Electrical Components Tie Down Strap

010864488
10S300-2-146: RNCC: 3 | RNVC: 9
10S300-2-146: RNCC: C | RNVC: 1

29 Nov 1979

5975-00-461-3095
Electrical Conduit Coupling Nut

004613095
CA3340-20: RNCC: 3 | RNVC: 2
AN3054-20: RNCC: 5 | RNVC: 2
CA3340-20: RNCC: 5 | RNVC: 2
2360-069010-11-0: RNCC: 5 | RNVC: 2
2360-069010-11-0: RNCC: 5 | RNVC: 2
2360-069010-11-0: RNCC: 5 | RNVC: 2

30 Apr 1969

5975-00-461-3097
Electrical Conduit Coupling Nut

004613097
CA3340-12: RNCC: 3 | RNVC: 2
AN3054-12: RNCC: 5 | RNVC: 2
2360-069030-11-0: RNCC: 5 | RNVC: 2
2360-069030-11-0: RNCC: 5 | RNVC: 2
2360-069030-11-0: RNCC: 5 | RNVC: 2
2360-069030.11.0: RNCC: 5 | RNVC: 2
CA3340-12: RNCC: 5 | RNVC: 2

30 Apr 1969

5975-00-395-9122
Electrical Grounding Plate

003959122
301237: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-403-9798
Electrical Grille Rack

004039798
949168-101: RNCC: 3 | RNVC: 2

28 Jul 1969

5975-01-516-4547
Rigid Metal Conduit

015164547
69-47014-3: RNCC: 3 | RNVC: 2

7 Jan 2004

5975-01-516-3113
Electrical Conductor Bushing

015163113
AII-MTS-01-214APPENDIXBITEM12: RNCC: 3 | RNVC: 1
DOD-STD-2003FIG3A213: RNCC: 5 | RNVC: 1

31 Dec 2003

5975-01-515-6218
Rigid Metal Conduit

015156218
6-52812-1: RNCC: 3 | RNVC: 9
6-52812-1: RNCC: C | RNVC: 1

2 Dec 2003

5975-01-469-6062
Electrical Equipment Mounting Base

014696062
822-0121-001: RNCC: 3 | RNVC: 2

16 Nov 1999

5975-01-469-9824
Electronic Equipment Mounting Tray

014699824
16101043-031: RNCC: 3 | RNVC: 2
16101043-021: RNCC: 5 | RNVC: 9

2 Dec 1999

5975-01-471-4296
Chassis Base

014714296
7-311180056-5: RNCC: 3 | RNVC: 2
7-311180056-5: RNCC: 5 | RNVC: 9

2 Feb 2000

5975-01-477-1017
Guide Rail

014771017
5260004-2: RNCC: 3 | RNVC: 2

31 Jul 2000

5975-01-441-0071
Electrical Equipment Mounting Base

014410071
308-5111-004: RNCC: 3 | RNVC: 2

30 Jan 1997

5975-01-164-4010
Junction Box

011644010
70550-22130-043: RNCC: 3 | RNVC: 2

16 Oct 1983

5975-01-185-9220
Electrical-Electronic Equipment Chassis

011859220
214-074-281-103: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-154-0074
Coupling

011540074
19C47-2421: RNCC: 3 | RNVC: 2

19 May 1983

5975-01-438-5606
Junction Box

014385606
3329402-3: RNCC: 3 | RNVC: 2

12 Nov 1996

5975-01-439-8490
Electrical Components Tie Down Strap

014398490
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-5-1: RNCC: 3 | RNVC: 2
MS3367-5-1: RNCC: 5 | RNVC: 9

20 Dec 1996

5975-01-087-7076
Electrical-Electronic Equipment Chassis

010877076
10178206: RNCC: 3 | RNVC: 2

22 Dec 1979

5975-01-089-4900
Wireway Assembly

010894900
502746W: RNCC: 3 | RNVC: 2
502746: RNCC: 3 | RNVC: 2

2 Feb 1980

5975-01-603-7717
Electrical-Electronic Equipment Panel

016037717
VMIVME-301A: RNCC: 3 | RNVC: 2

15 Mar 2012

5975-01-605-8216
Panel Blank

016058216
3799-301: RNCC: 3 | RNVC: 2

26 Apr 2012

5975-01-607-3420
Electrical Components Tie Down Strap

016073420
HV9150-C0: RNCC: 3 | RNVC: 2
10489915: RNCC: 6 | RNVC: 9

8 Jun 2012

5975-01-624-2237
Blank Panel

016242237
SPA-BLANK=: RNCC: 3 | RNVC: 2
SPA-BLANK=: RNCC: 5 | RNVC: 2

19 Dec 2013

5975-01-626-1382
Electrical-Electronic Equipment Panel

016261382
725916-811: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-436-5993
Electrical-Electronic Equipment Chassis

014365993
355-0256-501: RNCC: 3 | RNVC: 2

23 Sep 1996

5975-01-436-6901
Electrical Cable Protector

014366901
152-108: RNCC: 3 | RNVC: 2

25 Sep 1996

5975-01-149-4891
Suspension Assembly Clamp

011494891
L4231FA: RNCC: 3 | RNVC: 2
BT9533-0: RNCC: 5 | RNVC: 9
139-0922-060: RNCC: 7 | RNVC: 2

21 Mar 1983

5975-01-148-4430
Pillar

011484430
DYN27: RNCC: 3 | RNVC: 9

5 Mar 1983

5975-00-437-3706
Electrical Equipment Mounting Base

004373706
391-0900: RNCC: 3 | RNVC: 2
MT3399U: RNCC: 5 | RNVC: 2

5 Sep 1969

5975-00-432-0681
Junction Box Cover

004320681
0N047133: RNCC: 3 | RNVC: 2

5 May 1971

5975-01-020-4269
Mounting Swit Block

010204269
7216567-00: RNCC: 3 | RNVC: 2

30 Apr 1976

5975-01-647-4947
Blank Panel

016474947
304A040-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-648-7676
Electronic Equipment Mounting Tray

016487676
284W1693-3: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-649-3321
Electrical Components Tie Down Strap

016493321
3029T135: RNCC: 3 | RNVC: 2

27 Oct 2015

5975-01-651-2839
Electrical Box Connector

016512839
3888244: RNCC: 3 | RNVC: 2
3888244: RNCC: 5 | RNVC: 2
3888244: RNCC: 5 | RNVC: 9
3888244: RNCC: C | RNVC: 1

12 Jan 2016

5975-01-651-2739
Electrical Equipment Rack

016512739
1095800: RNCC: 3 | RNVC: 2

12 Jan 2016

5975-01-654-0808
Electrical Equipment Cabinet

016540808
A36H30DLP3PT: RNCC: 3 | RNVC: 2

18 Apr 2016

5975-01-662-6885
Electrical Conduit Adapter

016626885
MIC-DCA-S: RNCC: 3 | RNVC: 2
MIC-DCA-S: RNCC: 5 | RNVC: 2
40061978: RNCC: 5 | RNVC: 2

17 Apr 2017

5975-01-436-5050
Electronic Equipment Mounting Tray

014365050
732040-1: RNCC: 3 | RNVC: 2
732040-1: RNCC: 3 | RNVC: 9

20 Sep 1996

5975-01-436-5136
Rigid Metal Conduit

014365136
75A351011-2003: RNCC: 3 | RNVC: 2

20 Sep 1996

5975-01-436-1525
Electrical-Electronic Equipment Panel

014361525
406-075-158-111: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-01-227-2389
Electrical Equipment Cabinet

012272389
110D171G1: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-00-450-0945
Electrical-Electronic Equipment Chassis

004500945
351640-2: RNCC: 3 | RNVC: 2

12 May 1971

5975-01-015-9196
Junction Box Cover

010159196
45631-305: RNCC: 3 | RNVC: 2

30 Jan 1976

5975-01-600-1697
Me Conduit Assembly

016001697
227748-DL0000: RNCC: 3 | RNVC: 2

14 Nov 2011

5975-01-551-5346
Electrical Components Tie Down Strap

015515346
TYZ523M: RNCC: 3 | RNVC: 2

18 May 2007

5975-01-543-8580
Electrical Tie Down Mounting Base

015438580
SB6000UG2NY3TP: RNCC: 3 | RNVC: 2
CB4020V3N12P750: RNCC: 3 | RNVC: 2
9D0271P103T: RNCC: 5 | RNVC: 2

22 Sep 2006

5975-01-220-8127
Cable Tie

012208127
TY5234M: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-01-531-2355
Electrical Equipment Mounting Base

015312355
308-1301-041: RNCC: 3 | RNVC: 9

29 Jun 2005

5975-01-597-1631
Electrical Equipment Rack

015971631
N9030A-1CM: RNCC: 3 | RNVC: 2
N9030A-1CM: RNCC: 3 | RNVC: 9
91912020: RNCC: 5 | RNVC: 2

31 May 2011

5975-01-598-3948
Electrical-Electronic Equipment Chassis

015983948
11442228: RNCC: 3 | RNVC: 2

27 Jul 2011

5975-01-433-2110
Switch Terminal Cover

014332110
9475780-1: RNCC: 3 | RNVC: 2

24 Jun 1996

5975-01-433-0751
Switch Terminal Cover

014330751
9475687-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-160-8239
Conduit Cover Plate

011608239
2890850: RNCC: 3 | RNVC: 2
2890850: RNCC: 5 | RNVC: 2
2890850: RNCC: 5 | RNVC: 9

27 Aug 1983

5975-01-278-6576
Electrical-Electronic Equipment Chassis

012786576
411340-01: RNCC: 3 | RNVC: 2

7 May 1988

5975-00-997-6459
Electrical Nonmetallic Conduit Assembly

009976459
7445343-740: RNCC: 3 | RNVC: 2

10 Nov 1966

5975-01-644-8650
Electrical Wall Plate

016448650
SS8: RNCC: 3 | RNVC: 2

22 May 2015

5975-01-646-0803
Electrical Equipment Cabinet

016460803
764630-B21: RNCC: 3 | RNVC: 2

13 Jul 2015

5975-01-563-1368
Electrical Equipment Rack

015631368
C99F52205-11: RNCC: 3 | RNVC: 2
6093-103: RNCC: 5 | RNVC: 1
C99F52205-1: RNCC: 5 | RNVC: 9

2 May 2008

5975-01-564-9497
Electrical-Electronic Equipment Panel

015649497
470242-SS: RNCC: 3 | RNVC: 2

3 Jul 2008

5975-01-594-5245
Electrical-Electronic Equipment Chassis

015945245
554-2665-005: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-596-9089
Electrical Tie Down Mounting Base

015969089
NMCSB5000UGNH2: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-589-4693
Electrical Equipment Mounting Base

015894693
M123029: RNCC: 3 | RNVC: 2
M123029: RNCC: 3 | RNVC: 9

27 Oct 2010

5975-01-593-5741
Programmed Device

015935741
74434B60K1: RNCC: 3 | RNVC: 1

12 Apr 2011

5975-01-594-1669
Spec Power S Shelf

015941669
290914-760: RNCC: 3 | RNVC: 2
B3210374-1 SR1: RNCC: 5 | RNVC: 2

22 Apr 2011

5975-01-590-1685
Electrical Equipment Mounting Base

015901685
M063042: RNCC: 3 | RNVC: 2
M063042: RNCC: 3 | RNVC: 9

22 Nov 2010

5975-01-394-6747
Electrical Equipment Cabinet

013946747
10206-246: RNCC: 3 | RNVC: 2

12 Aug 1994

5975-01-140-0762
Cable Marker Sleeve

011400762
TMS-SCE-3/32-2.0-S2-9: RNCC: 3 | RNVC: 1
215511T100: RNCC: 5 | RNVC: 2
RNF-100-3/32X45/64 WHITE: RNCC: 5 | RNVC: 9
215511T100: RNCC: 7 | RNVC: 2

7 Oct 1982

5975-01-141-6839
Cable Marker Sleeve

011416839
TMS-SCE-3/32-2.0-S2-9: RNCC: 3 | RNVC: 1
215511T96: RNCC: 5 | RNVC: 2
RNF-100-3/32X45/64 WHITE: RNCC: 5 | RNVC: 9
215511T96: RNCC: 7 | RNVC: 2

3 Nov 1982

5975-01-275-6888
Electrical-Electronic Equipment Chassis

012756888
1444: RNCC: 3 | RNVC: 2

25 Mar 1988

5975-01-277-4967
Electrical-Electronic Equipment Panel

012774967
10121-2000: RNCC: 3 | RNVC: 2
10121-2000-02: RNCC: 5 | RNVC: 2

22 Apr 1988

5975-01-206-8866
Electrical Cable Nipple

012068866
1-1464-05: RNCC: 3 | RNVC: 9

24 Apr 1985

5975-00-413-4424
Cable Marker Sleeve

004134424
SS7026-16: RNCC: 3 | RNVC: 2
SS7026-16: RNCC: 8 | RNVC: 2

1 May 1970

5975-01-038-8707
Electrical Box Connector

010388707
5421: RNCC: 3 | RNVC: 1

14 Apr 1977

5975-01-634-0678
Electrical Equipment Shelf

016340678
U2V-4: RNCC: 3 | RNVC: 2

15 Dec 2014

5975-01-641-5774
Electrical-Electronic Equipment Chassis

016415774
NTDW72AAE5: RNCC: 3 | RNVC: 9

27 Jan 2015

5975-01-397-1346
Electrical Equipment Rack

013971346
MT6915FSQ131: RNCC: 3 | RNVC: 2
290-118913-01: RNCC: 3 | RNVC: 2

4 Oct 1994

5975-01-171-9447
Electrical Equipment Mounting Base

011719447
622-3090-003: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-273-0810
Blank Panel

012730810
386-2791-01: RNCC: 3 | RNVC: 2

19 Feb 1988

5975-01-222-7158
Side Assembly Panel

012227158
257-42266: RNCC: 3 | RNVC: 9

16 Dec 1985

5975-00-197-0017
Electrical Grounding Plate

001970017
738597-1: RNCC: 3 | RNVC: 2

17 Jun 1970

5975-00-845-2095
Electrical Equipment Cabinet

008452095
000: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-01-033-2733
Conduit Outlet Cover

010332733
21503: RNCC: 3 | RNVC: 2

2 Jan 1977

5975-01-662-3824
Ground Rod

016623824
1751-4012: RNCC: 3 | RNVC: 2

5 Apr 2017

5975-01-662-7042
Electrical Cable Protector

016627042
CE01167D21A: RNCC: 3 | RNVC: 2

17 Apr 2017

5975-01-663-0848
Electrical Conduit Adapter

016630848
9272-B: RNCC: 3 | RNVC: 2

26 Apr 2017

5975-01-663-4703
Electrical Equipment Shelf

016634703
UHK81360-1: RNCC: 3 | RNVC: 2

10 May 2017

5975-01-662-5289
Electrical Tie Down Mounting Base

016625289
ABMZ5-AT-0: RNCC: 3 | RNVC: 2
6736547: RNCC: 7 | RNVC: 2

11 Apr 2017

5975-01-124-3992
Junction Box

011243992
10045627: RNCC: 3 | RNVC: 2

1 Jan 1982

5975-01-130-2137
Cable Strain Relief Bushing

011302137
1260: RNCC: 3 | RNVC: 2

18 Apr 1982

5975-00-186-3962
Electrical Cable Protector

001863962
SCD7311AITEM3: RNCC: 3 | RNVC: 2
SCD7311APT3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-422-1301
Cable Bracket

004221301
757-4533-001: RNCC: 3 | RNVC: 2

16 Dec 1970

5975-01-030-3599
Control Box Assembl

010303599
63E41528: RNCC: 3 | RNVC: 2

4 Nov 1976

5975-01-658-9628
Electrical Equipment Rack

016589628
279409-07: RNCC: 3 | RNVC: 2

27 Oct 2016

5975-01-432-1989
Electrical Equipment Rack

014321989
10488-3230-10: RNCC: 3 | RNVC: 2
KLGRC7101: RNCC: 5 | RNVC: 2

29 May 1996

5975-01-448-2992
Electrical-Electronic Equipment Chassis

014482992
719344-1: RNCC: 3 | RNVC: 2

26 Aug 1997

5975-00-448-3159
Flexible Metal Conduit Assembly

004483159
5116427-4: RNCC: 3 | RNVC: 2
5116427-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-026-9931
Electrical Equipment Rack

010269931
1400C-0101G1: RNCC: 3 | RNVC: 9
MX-9902(P)/G: RNCC: 5 | RNVC: 2

5 Sep 1976

5975-01-418-0373
Cable Marker Sleeve

014180373
17P1E1414-3: RNCC: 3 | RNVC: 2

18 Aug 1995

5975-01-219-9468
Bushing

012199468
10-382969: RNCC: 3 | RNVC: 2

5 Nov 1985

5975-01-218-8584
Electrical-Electronic Equipment Chassis

012188584
0N303502-2: RNCC: 3 | RNVC: 2

20 Oct 1985

5975-01-267-3479
Digita Mounting Kit

012673479
0355-12: RNCC: 3 | RNVC: 2

10 Nov 1987

5975-00-186-8884
Stuffing Tube Adapter

001868884
9S5355LALT9SIZEB: RNCC: 3 | RNVC: 2
336817B: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-655-8391
Electrical-Electronic Equipment Chassis

016558391
717612560-004: RNCC: 3 | RNVC: 2

8 Jun 2016

5975-01-655-9226
Junction Box

016559226
SBA4170: RNCC: 3 | RNVC: 2
15191252: RNCC: 5 | RNVC: 2

10 Jun 2016

5975-01-263-1630
Electrical Connector Protector Kit

012631630
BCP-4: RNCC: 3 | RNVC: 2

10 Sep 1987

5975-01-650-8317
System Tracker

016508317
631B: RNCC: 3 | RNVC: 2

17 Dec 2015

5975-01-652-8230
Eprom

016528230
74434B66VER05: RNCC: 3 | RNVC: 1

4 Mar 2016

5975-01-411-7724
Junction Box

014117724
RVWB22: RNCC: 3 | RNVC: 9
00034481033486: RNCC: 5 | RNVC: 9

31 Mar 1995

5975-00-578-2229
Electrical Box Connector

005782229
SC-C-82720: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-197-5201
Lamp

011975201
025-11153: RNCC: 3 | RNVC: 2
25-11153: RNCC: 5 | RNVC: 9

22 Dec 1984

5975-01-259-5224
Blade

012595224
8000-417I: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-176-6403
Cable Hanger

011766403
U463A: RNCC: 3 | RNVC: 2

13 Apr 1984

5975-01-180-1967
Electrical Equipment Mounting Base

011801967
6258054-1: RNCC: 3 | RNVC: 2

25 May 1984

5975-01-649-5755
Conduit Outlet

016495755
BACC63CC22-55P7: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-649-5761
Electrical-Electronic Equipment Panel

016495761
284A3816-2: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-651-3144
Electrical Equipment Leg

016513144
1021-0048-01: RNCC: 3 | RNVC: 2

13 Jan 2016

5975-01-259-5234
Blade

012595234
8000-417U: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-049-5489
Electrical Equipment Mounting Base

010495489
522-3746-001: RNCC: 3 | RNVC: 2
390D6A: RNCC: 3 | RNVC: 2

21 Oct 1977

5975-01-052-3489
Electrical Components Tie Down Strap

010523489
08376: RNCC: 3 | RNVC: 2
TY-524M: RNCC: 3 | RNVC: 2
PLT1.5I-C: RNCC: 5 | RNVC: 2
PLT1.5I-C: RNCC: 5 | RNVC: 2
01903757: RNCC: 5 | RNVC: 2
91474236: RNCC: 5 | RNVC: 2
242201505094: RNCC: 5 | RNVC: 2
TY524M: RNCC: 5 | RNVC: 2
604750: RNCC: 5 | RNVC: 9

13 Dec 1977

5975-01-053-2840
Conduit

010532840
CRN2646-34: RNCC: 3 | RNVC: 2

1 Jan 1978

5975-01-058-2257
Electrical Box Connector

010582257
7353: RNCC: 3 | RNVC: 2
G88022-D604-T019: RNCC: 5 | RNVC: 2
S72634: RNCC: 5 | RNVC: 2

24 Mar 1978

5975-00-116-9646
Electrical Conduit End Seal Disk

001169646
PEC120: RNCC: 3 | RNVC: 9

18 Oct 1968

5975-01-646-8728
Cable Reinforcing Link

016468728
315A1511-1: RNCC: 3 | RNVC: 2

3 Aug 2015

5975-01-647-5955
Electrical Tie Down Mounting Base

016475955
TM2R6-M30: RNCC: 3 | RNVC: 2

26 Aug 2015

5975-01-648-1861
Electrical Conduit Adapter

016481861
25PF23: RNCC: 3 | RNVC: 2
25PF23: RNCC: 3 | RNVC: 9

17 Sep 2015

5975-01-648-1162
Electrical Cable Protector

016481162
BGF.2M.100.XAV: RNCC: 3 | RNVC: 2

15 Sep 2015

5975-01-648-3708
Electrical Equipment Cabinet

016483708
11002-5200-01: RNCC: 3 | RNVC: 2

22 Sep 2015

5975-01-408-6237
Electrical Equipment Rack

014086237
7013057-916: RNCC: 3 | RNVC: 2

22 Feb 1995

5975-01-408-7749
Terminal Board

014087749
RC11090-31U: RNCC: 3 | RNVC: 2
9D0090-31U: RNCC: 5 | RNVC: 2

24 Feb 1995

5975-01-407-7135
Electrical-Electronic Equipment Panel

014077135
48817: RNCC: 3 | RNVC: 2

3 Feb 1995

5975-01-216-2346
Cable Tie

012162346
TY5232M: RNCC: 3 | RNVC: 2
PLT2M-C: RNCC: 5 | RNVC: 2

7 Sep 1985

5975-01-222-0115
B Driver

012220115
461728-01: RNCC: 3 | RNVC: 2
461728-01: RNCC: 3 | RNVC: 9

6 Dec 1985

5975-01-047-3120
Electrical Components Tie Down Strap

010473120
SST2I: RNCC: 3 | RNVC: 2
238-0675: RNCC: 7 | RNVC: 2

2 Sep 1977

5975-01-645-4523
Electrical Conduit Adapter

016454523
2691: RNCC: 3 | RNVC: 2

16 Jun 2015

5975-01-645-1685
Electrical Box Connector

016451685
8553364-1: RNCC: 3 | RNVC: 2

5 Jun 2015

5975-01-645-8423
Electrical Standardized Components Case Section

016458423
BOOT-0001: RNCC: 3 | RNVC: 2

1 Jul 2015

5975-01-646-2979
Electrical Conduit Coupling

016462979
M24758-8D: RNCC: 3 | RNVC: 2

17 Jul 2015

5975-01-219-9463
Junction Plate

012199463
10-382785: RNCC: 3 | RNVC: 2

5 Nov 1985

5975-01-116-1690
Junc Mounting Plate

011161690
12277877: RNCC: 3 | RNVC: 2
12277877: RNCC: 3 | RNVC: 9

22 Jul 1981

5975-00-068-4476
Electrical Equipment Cabinet

000684476
CY2544CWLR1: RNCC: 3 | RNVC: 2
K663220001: RNCC: 5 | RNVC: 2
5895-21-841-3612: RNCC: 6 | RNVC: 9

5 Jul 1967

5975-01-643-3408
Electrical Standardized Components Case

016433408
PWR-CAS-FLS02: RNCC: 3 | RNVC: 9
PWR-CAS-FLS02: RNCC: 5 | RNVC: 2
PWR-CAS-FLSO2: RNCC: 5 | RNVC: 9

30 Mar 2015

5975-01-104-2765
Electrical Conduit Locknut

011042765
47550: RNCC: 3 | RNVC: 2
47550: RNCC: 3 | RNVC: 9

2 Dec 1980

5975-01-105-4247
Ground Strap

011054247
3150100-601-3: RNCC: 3 | RNVC: 2

23 Dec 1980

5975-01-105-4243
Ground Strap

011054243
3150100-601-21: RNCC: 3 | RNVC: 2

23 Dec 1980

5975-01-078-4608
Electrical Components Tie Down Strap

010784608
MS3367-4-7: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

13 Jun 1979

5975-01-641-4494
Conduit Outlet Cover

016414494
CP-RG2-BLK-N4: RNCC: 3 | RNVC: 2

22 Jan 2015

5975-01-642-4557
Electrical Box Connector

016424557
RSR-629-E: RNCC: 3 | RNVC: 2

25 Feb 2015

5975-01-641-6259
Electrical Equipment Rack

016416259
709228: RNCC: 3 | RNVC: 2
709228: RNCC: 5 | RNVC: 2

28 Jan 2015

5975-01-210-6221
Electrical Equipment Rack

012106221
11463688: RNCC: 3 | RNVC: 2
11463688: RNCC: 5 | RNVC: 1

14 Jun 1985

5975-01-098-8394
Nut Protect

010988394
10-405979-249: RNCC: 3 | RNVC: 2

8 Aug 1980

5975-01-100-5681
Electrical Conduit Tee

011005681
28F1: RNCC: 3 | RNVC: 9

10 Sep 1980

5975-01-073-9974
Base

010739974
GC34-221: RNCC: 3 | RNVC: 2
GC34-221: RNCC: 3 | RNVC: 9

24 Mar 1979

5975-01-379-5050
Cable Terminal Chamber

013795050
XAGA550B148/300: RNCC: 3 | RNVC: 2

31 Aug 1993

5975-01-380-4799
Blank Panel

013804799
227BC502-1: RNCC: 3 | RNVC: 9
227BC502-1: RNCC: 5 | RNVC: 9

20 Sep 1993

5975-01-380-7151
Flexible Metal Conduit Assembly

013807151
115355-004: RNCC: 3 | RNVC: 2
5493230-4: RNCC: 3 | RNVC: 2
115355-004: RNCC: 5 | RNVC: 9

24 Sep 1993

5975-01-380-5432
Electrical Box Connector

013805432
15000018: RNCC: 3 | RNVC: 2

21 Sep 1993

5975-01-201-5401
Electrical-Electronic Equipment Chassis

012015401
4041807-953: RNCC: 3 | RNVC: 2

20 Feb 1985

5975-00-538-7957
Electrical Cable Nipple

005387957
568666: RNCC: 3 | RNVC: 2
101021: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-538-3070
Electrical Equipment Cabinet

005383070
506-0453-003: RNCC: 3 | RNVC: 2
3000-298B: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-539-7234
Electrical Equipment Cabinet

005397234
PL7303927G2: RNCC: 3 | RNVC: 2
CY1138AFPS6: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-379-4479
Electrical Conduit Adapter

013794479
13470-899-685: RNCC: 3 | RNVC: 2

31 Aug 1993

5975-01-379-3035
Cable Terminal Chamber

013793035
WRSS35/170-48: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-00-534-3569
Cable Marker Sleeve

005343569
5343569: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-187-5403
Conduit Chase Nipple

011875403
G70550-4: RNCC: 3 | RNVC: 2

23 Aug 1984

5975-01-377-0050
Electrical Equipment Cabinet

013770050
7259301-101: RNCC: 3 | RNVC: 2
CY8677WSC: RNCC: 3 | RNVC: 2

2 Jul 1993

5975-01-376-8882
Electrical Equipment Rack

013768882
125330-3: RNCC: 3 | RNVC: 2
CY-5289/SPX-501(V): RNCC: 5 | RNVC: 2

9 Jun 1993

5975-01-142-6857
Cable Marker Sleeve

011426857
TMS-SCE-3/4-2.0-9: RNCC: 3 | RNVC: 1
215511T83: RNCC: 5 | RNVC: 2
RNF-100-3/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T83: RNCC: 7 | RNVC: 2

18 Nov 1982

5975-01-143-3956
Panel Front

011433956
405035-1: RNCC: 3 | RNVC: 2

2 Dec 1982

5975-01-115-1304
Electrical Equipment Cabinet

011151304
CY-4033A/SRA-34(V): RNCC: 3 | RNVC: 2

28 Jun 1981

5975-01-003-8073
Spindle Ground Brus

010038073
91535-001: RNCC: 3 | RNVC: 9

11 May 1975

5975-01-375-2292
Cable Marker Sleeve

013752292
TRSA1014/E/J: RNCC: 3 | RNVC: 2
99046778: RNCC: 5 | RNVC: 2

7 May 1993

5975-01-375-2784
Electrical-Electronic Equipment Panel

013752784
68714-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2782
Electrical-Electronic Equipment Panel

013752782
68712-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-00-534-3503
Cable Marker Sleeve

005343503
5343503: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-01-140-0420
Altere Socket Strip

011400420
2532552-1: RNCC: 3 | RNVC: 2

7 Oct 1982

5975-01-138-3691
Blank Panel

011383691
33-062046-01: RNCC: 3 | RNVC: 2
33-062046-01: RNCC: 5 | RNVC: 9

11 Sep 1982

5975-00-514-3340
Electrical Conduit Elbow

005143340
5143340: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-108-6388
Electrical Equipment Mounting Base

011086388
622-5660-001: RNCC: 3 | RNVC: 2

3 Mar 1981

5975-01-107-8150
Circuit Board Support

011078150
LCBS-3N: RNCC: 3 | RNVC: 9

13 Feb 1981

5975-01-110-1150
Electrical Nonmetallic Conduit Assembly

011101150
GA115-2: RNCC: 3 | RNVC: 2
C8922-25: RNCC: 7 | RNVC: 2
C8922: RNCC: D | RNVC: 9

26 Mar 1981

5975-01-633-1595
Electrical Equipment Cabinet

016331595
CB04887-001: RNCC: 3 | RNVC: 2
40082105: RNCC: 5 | RNVC: 2

12 Nov 2014

5975-01-633-1080
Electrical Conduit Coupling

016331080
261-SRT: RNCC: 3 | RNVC: 2

7 Nov 2014

5975-01-633-5069
Electrical Equipment Cabinet

016335069
030815-0001: RNCC: 3 | RNVC: 2

25 Nov 2014

5975-01-633-6615
Electrical Equipment Mounting Base

016336615
07222000-2: RNCC: 3 | RNVC: 2
07222000: RNCC: D | RNVC: 9

28 Nov 2014

5975-01-372-2387
Electrical Equipment Mounting Base

013722387
10100: RNCC: 3 | RNVC: 2
17B9E1000-1: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-373-9958
Cable Marker Sleeve

013739958
TRSA1014/E/P: RNCC: 3 | RNVC: 2
99046784: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-233-3748
Electrical Equipment Rack

012333748
10-158031-1: RNCC: 3 | RNVC: 2

30 May 1986

5975-01-256-8116
Electrical-Electronic Equipment Chassis

012568116
3186105-004-001: RNCC: 3 | RNVC: 2

9 Jun 1987

5975-01-134-2043
Junction Box

011342043
1264TE5: RNCC: 3 | RNVC: 2

30 Jun 1982

5975-00-548-3786
Stuffing Tube Packing Nut

005483786
734659PC5: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-098-5940
Printed Wir Chassis

010985940
346394-1: RNCC: 3 | RNVC: 2
346394-1: RNCC: 8 | RNVC: 2

5 Aug 1980

5975-01-105-0980
Electrical Equipment Cabinet

011050980
57977-40000: RNCC: 3 | RNVC: 2

17 Dec 1980

5975-00-553-5528
Flexible Metal Conduit

005535528
176B820G1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-250-3810
Flexible Metal Conduit Assembly

012503810
5188105-123: RNCC: 1 | RNVC: 2
204-123: RNCC: 3 | RNVC: 2
TBD-123: RNCC: 5 | RNVC: 9

28 Feb 1987

5975-01-127-1318
Tiedown Cable

011271318
0203-0431: RNCC: 3 | RNVC: 2
0203-0431: RNCC: 3 | RNVC: 2

24 Feb 1982

5975-01-097-1734
Electrical Box Connector

010971734
2524: RNCC: 3 | RNVC: 2

7 Jul 1980

5975-00-980-3042
Electrical Equipment Mounting Base

009803042
KR3882-2: RNCC: 3 | RNVC: 9
KR3882-2: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-627-2293
Electrical Equipment Mounting Base

016272293
457915-02: RNCC: 3 | RNVC: 2

7 Apr 2014

5975-01-369-8163
Electrical-Electronic Equipment Panel

013698163
03933-00-001: RNCC: 3 | RNVC: 9

7 Jan 1993

5975-00-521-1990
Flexible Metal Conduit Assembly

005211990
5116427-29: RNCC: 3 | RNVC: 2
5116427-29: RNCC: 5 | RNVC: 9

24 Nov 1967

5975-01-244-3051
Keyboard Base Assembly

012443051
10045443-101: RNCC: 3 | RNVC: 2

9 Nov 1986

5975-01-089-1351
Half Rack Cover Pla

010891351
89102785A: RNCC: 3 | RNVC: 2

26 Jan 1980

5975-01-007-7323
Screw Set

010077323
4915130-01: RNCC: 3 | RNVC: 2

9 Aug 1975

5975-01-624-2958
Electrical-Electronic Equipment Panel

016242958
K10053237-1: RNCC: 3 | RNVC: 2

21 Dec 2013

5975-01-624-1396
Electrical-Electronic Equipment Chassis

016241396
ACP-1320BP-30ZE: RNCC: 3 | RNVC: 2
ACP-1320BP-00ZE: RNCC: 5 | RNVC: 9

17 Dec 2013

5975-01-626-3360
Electrical Equipment Cabinet

016263360
734-62670-1: RNCC: 3 | RNVC: 2
734-62670: RNCC: D | RNVC: 9

6 Mar 2014

5975-01-626-3795
Electrical-Electronic Equipment Panel

016263795
734-65230-1: RNCC: 3 | RNVC: 2
734-65230: RNCC: D | RNVC: 9

7 Mar 2014

5975-01-626-2915
Electrical-Electronic Equipment Panel

016262915
734-65225-1: RNCC: 3 | RNVC: 2
734-65225: RNCC: D | RNVC: 9

5 Mar 2014

5975-01-365-9551
Rigid Nonmetallic Conduit

013659551
14108: RNCC: 3 | RNVC: 9

19 Oct 1992

5975-01-208-9668
Stored Cables Cover

012089668
10178479-6: RNCC: 3 | RNVC: 2
EC1024686: RNCC: 5 | RNVC: 9

21 May 1985

5975-01-087-7584
Electrical Equipment Drawer

010877584
908D723G01: RNCC: 3 | RNVC: 1
908D723G01TR: RNCC: 5 | RNVC: 2
908D723G01: RNCC: 5 | RNVC: 9

25 Dec 1979

5975-01-006-0889
Electrical Components Tie Down Strap

010060889
MS3367-1-8: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
TY-25M-8: RNCC: 5 | RNVC: 1
TY-25M-8: RNCC: 5 | RNVC: 1
PANPLT2S-C8: RNCC: 5 | RNVC: 2
PLT2S-C8: RNCC: 5 | RNVC: 2
MS3367-1-8: RNCC: 5 | RNVC: 2
MS3367-1-8: RNCC: 5 | RNVC: 2
MS3367-1-8: RNCC: 5 | RNVC: 2

12 Jul 1975

5975-01-622-3643
Electrical-Electronic Equipment Chassis

016223643
C99A55110-0003: RNCC: 3 | RNVC: 2

5 Oct 2013

5975-01-622-4401
Electrical Components Tie Down Strap

016224401
ZIP50: RNCC: 3 | RNVC: 2

8 Oct 2013

5975-01-622-4432
Electrical Equipment Cabinet Case

016224432
G5EM0101: RNCC: 3 | RNVC: 2

8 Oct 2013

5975-01-316-4317
Electrical-Electronic Equipment Panel

013164317
70550-24516-102: RNCC: 3 | RNVC: 2

8 Mar 1990

5975-00-521-1993
Flexible Metal Conduit Assembly

005211993
5116427-38: RNCC: 3 | RNVC: 2
5116427-38: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-518-0683
Electrical Standardized Components Case

005180683
AB1002F: RNCC: 3 | RNVC: 2
CY2755UPA35: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-619-3172
Cable Marker Sleeve

016193172
HT-SCE-1K-3/32-2.0-0: RNCC: 3 | RNVC: 2

24 May 2013

5975-01-621-0055
Blank Panel

016210055
N30-25021: RNCC: 3 | RNVC: 2

20 Aug 2013

5975-01-353-7107
Junction Box Assembly

013537107
C33218-1: RNCC: 3 | RNVC: 9
C33218-1: RNCC: 5 | RNVC: 2

14 Feb 1992

5975-00-518-7817
Conduit-Inner Wing

005187817
32-75035-62: RNCC: 3 | RNVC: 2

11 Aug 1974

5975-01-183-6906
Electrical Components Tie Down Strap

011836906
21662228-280: RNCC: 3 | RNVC: 2
21662228-280: RNCC: 3 | RNVC: 9
4SST-3S: RNCC: 5 | RNVC: 2
4SST-3S: RNCC: 5 | RNVC: 9
445-9844: RNCC: 6 | RNVC: 9

8 Jul 1984

5975-01-618-3657
Electrical-Electronic Equipment Chassis

016183657
72D245024-1005: RNCC: 3 | RNVC: 2

22 Apr 2013

5975-01-618-4835
Electrical-Electronic Equipment Chassis

016184835
2100F815GR1: RNCC: 3 | RNVC: 1

25 Apr 2013

5975-01-618-5673
Electrical Conduit Adapter

016185673
NC360T: RNCC: 3 | RNVC: 2
NC360T: RNCC: 5 | RNVC: 9

29 Apr 2013

5975-01-353-6185
Electrical Equipment Cabinet

013536185
1646385-109: RNCC: 3 | RNVC: 2

13 Feb 1992

5975-01-013-1010
Cable Marker Sleeve

010131010
SS7026-294: RNCC: 3 | RNVC: 2

25 Nov 1975

5975-01-617-4416
Electrical-Electronic Equipment Panel

016174416
0002-9076-301: RNCC: 3 | RNVC: 2

22 Mar 2013

5975-01-351-4763
Electrical-Electronic Equipment Chassis

013514763
935-103500-00: RNCC: 3 | RNVC: 2

9 Jan 1992

5975-01-352-4907
Flexible Metal Conduit Assembly

013524907
CH10-0192-419-03-SM: RNCC: 3 | RNVC: 2

27 Jan 1992

5975-01-076-2263
Electrical-Electronic Equipment Chassis

010762263
11776574: RNCC: 3 | RNVC: 2
60082-241: RNCC: 5 | RNVC: 2

3 May 1979

5975-00-866-8377
Electrical Equipment Mounting Base

008668377
522-3332-004: RNCC: 3 | RNVC: 2
MT-3094/ARC-105: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-869-3749
Electrical Conduit Cross

008693749
739271-01: RNCC: 3 | RNVC: 2
E1185-44-10: RNCC: 3 | RNVC: 2

25 Oct 1967

5975-01-616-4410
Electrical-Electronic Equipment Chassis

016164410
04-OG-8321-CN: RNCC: 3 | RNVC: 2

13 Feb 2013

5975-01-066-6494
Electrical Conduit Coupling

010666494
8224: RNCC: 3 | RNVC: 2
D-361-S: RNCC: 5 | RNVC: 9
21601: RNCC: 5 | RNVC: 9

15 Oct 1978

5975-01-070-2712
Electrical Nonmetallic Conduit Assembly

010702712
CRN2646-42: RNCC: 3 | RNVC: 2
GA111-5-2: RNCC: 5 | RNVC: 2
C8922-132-1: RNCC: 5 | RNVC: 2

8 Jan 1979

5975-00-880-6285
Electrical Wall Plate

008806285
S18: RNCC: 3 | RNVC: 9
97532: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-01-612-9479
Electrical Box Connector

016129479
22785: RNCC: 3 | RNVC: 2

25 Oct 2012

5975-01-474-5508
Guide Rail

014745508
MDMT10: RNCC: 3 | RNVC: 2
5D0519-5: RNCC: 5 | RNVC: 2

5 May 2000

5975-01-611-5388
Electrical-Electronic Equipment Chassis

016115388
8527287: RNCC: 3 | RNVC: 2

18 Sep 2012

5975-01-612-4293
Metallic Raceway Assembly

016124293
0721400-14: RNCC: 3 | RNVC: 2
0721400-14: RNCC: 3 | RNVC: 9

11 Oct 2012

5975-01-473-3485
Electrical Equipment Cabinet Case

014733485
6578824: RNCC: 3 | RNVC: 2

5 Apr 2000

5975-01-473-0520
Electrical Equipment Cabinet

014730520
7371700-00: RNCC: 3 | RNVC: 2

24 Mar 2000

5975-01-473-1834
Electrical-Electronic Equipment Chassis

014731834
8520126-901: RNCC: 3 | RNVC: 2

29 Mar 2000

5975-01-473-6015
Electrical Bonding Ring

014736015
158360: RNCC: 3 | RNVC: 2
158360: RNCC: 5 | RNVC: 9

11 Apr 2000

5975-01-163-2130
Stand-Off Bushing

011632130
130-15-AL-6-32P: RNCC: 3 | RNVC: 2

29 Sep 1983

5975-01-052-9748
Light Union Swivel

010529748
52501-4-4: RNCC: 3 | RNVC: 2

23 Dec 1977

5975-01-470-8244
Junction Box

014708244
069589: RNCC: 3 | RNVC: 2

11 Jan 2000

5975-01-471-0496
Electrical Conduit Bondnut

014710496
062921: RNCC: 3 | RNVC: 2
62921: RNCC: 5 | RNVC: 2

20 Jan 2000

5975-01-471-1233
Electrical-Electronic Equipment Chassis

014711233
063446: RNCC: 3 | RNVC: 2

24 Jan 2000

5975-01-471-6820
Switch Box Case

014716820
10-106236: RNCC: 3 | RNVC: 2

10 Feb 2000

5975-01-162-4075
Electrical Equipment Rack

011624075
37656990-002: RNCC: 3 | RNVC: 2

17 Sep 1983

5975-00-869-8898
Blank Panel

008698898
9170554: RNCC: 3 | RNVC: 2
9170554: RNCC: 5 | RNVC: 1

1 Jan 1960

5975-01-565-0459
Electrical Equipment Mounting Base

015650459
622-9670-001: RNCC: 3 | RNVC: 2
622-9670-001: RNCC: 5 | RNVC: 2
622-9670-001: RNCC: 5 | RNVC: 2

9 Jul 2008

5975-01-566-0226
Electrical-Electronic Equipment Chassis

015660226
4084363-0501: RNCC: 1 | RNVC: 3
4084363-0501: RNCC: 3 | RNVC: 3

16 Aug 2008

5975-01-566-0837
Electrical Conduit Adapter

015660837
712AS116A4048C3: RNCC: 3 | RNVC: 2

19 Aug 2008

5975-01-608-9554
Flexible Nonmetallic Conduit

016089554
623-4929: RNCC: 3 | RNVC: 9

13 Jul 2012

5975-01-468-6034
Electrical-Electronic Equipment Chassis

014686034
CISCO7206VXR: RNCC: 3 | RNVC: 2
CISCO7206: RNCC: 5 | RNVC: 9

15 Oct 1999

5975-01-468-6161
Electrical-Electronic Equipment Chassis

014686161
IPC-610: RNCC: 3 | RNVC: 2

18 Oct 1999

5975-01-468-9258
Flexible Metal Conduit Assembly

014689258
152188: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-469-8134
Electrical Equipment Rack

014698134
C200HW-BI081: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-468-7425
Electrical Conduit Ferrule

014687425
PC109D0900-13: RNCC: 3 | RNVC: 2

20 Oct 1999

5975-01-468-9248
Flexible Metal Conduit Assembly

014689248
254709: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-470-2761
Flexible Metal Conduit Assembly

014702761
226482-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-507: RNCC: 7 | RNVC: 2

13 Dec 1999

5975-01-160-6435
Conduit Cover Plate

011606435
2890849: RNCC: 3 | RNVC: 2
2890849: RNCC: 5 | RNVC: 2
2890849: RNCC: 5 | RNVC: 9

24 Aug 1983

5975-01-158-4047
Electrical-Electronic Equipment Panel

011584047
5051694-1: RNCC: 3 | RNVC: 2

22 Jul 1983

5975-01-160-6142
Electrical Equipment Cabinet

011606142
259516-000: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-00-879-5809
Cable Strain Relief Bushing

008795809
C3966-020-1: RNCC: 3 | RNVC: 9

27 Oct 1967

5975-01-560-1429
Electrical Components Tie Down Strap

015601429
154A24TY524M: RNCC: 3 | RNVC: 2
154A24TY524M: RNCC: 3 | RNVC: 9

16 Jan 2008

5975-01-560-6099
Metallic Raceway

015606099
AF25-001: RNCC: 3 | RNVC: 2

5 Feb 2008

5975-01-465-7242
Electrical Wall Plate

014657242
7-511115146-5: RNCC: 3 | RNVC: 2

18 Jun 1999

5975-01-465-5377
Electronic Equipment Mounting Tray

014655377
10208-1074-01: RNCC: 3 | RNVC: 2

11 Jun 1999

5975-01-465-8828
Cable Marker Sleeve

014658828
13076094-1: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-01-466-0009
Electrical Equipment Rack

014660009
J1502A: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-01-468-4730
Electrical Equipment Foot

014684730
604397: RNCC: 3 | RNVC: 2

12 Oct 1999

5975-00-513-0705
Cushion Washer

005130705
WA10078-12: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-983-5234
Electrical Box Connector

009835234
CGB3239: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-917-1817
Electrical Components Tie Down Strap

009171817
PLC2SS10-4: RNCC: 3 | RNVC: 2
TY15-4: RNCC: 3 | RNVC: 2

18 Jul 1966

5975-00-829-4113
Breaker Box

008294113
58875A: RNCC: 3 | RNVC: 2

15 Apr 1972

5975-01-555-1527
Junction Box

015551527
70600-81071-044: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-01-555-4251
Electrical-Electronic Equipment Chassis

015554251
VCMR1602: RNCC: 3 | RNVC: 2

5 Sep 2007

5975-01-558-7847
Electrical Equipment Mounting Base

015587847
28-106-180EOL: RNCC: 3 | RNVC: 2

21 Nov 2007

5975-01-463-5726
Electrical Wall Plate

014635726
CNN3568E: RNCC: 3 | RNVC: 2

26 Mar 1999

5975-01-463-4840
Flexible Metal Conduit

014634840
8212-18: RNCC: 3 | RNVC: 2
8212: RNCC: D | RNVC: 9

24 Mar 1999

5975-01-215-7199
Electrical Equipment Mounting Base

012157199
HT2-50: RNCC: 3 | RNVC: 2

30 Aug 1985

5975-01-026-2426
Electrical Components Tie Down Strap

010262426
PLT2ICP: RNCC: 3 | RNVC: 2

19 Aug 1976

5975-01-554-1859
Electrical-Electronic Equipment Chassis

015541859
77425000-059: RNCC: 3 | RNVC: 2
5975PL0932145: RNCC: 6 | RNVC: 9

1 Aug 2007

5975-01-553-6852
Electronic Equipment Mounting Tray

015536852
200-99815-101: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-461-6525
Housing Section

014616525
11456111: RNCC: 3 | RNVC: 2

22 Dec 1998

5975-01-463-6095
Electrical Nonmetallic Conduit Assembly

014636095
172A1376-060: RNCC: 3 | RNVC: 2

30 Mar 1999

5975-00-545-0505
Ignition Cab Marker

005450505
AN4028-7: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-01-511-2026
Electrical Tie Down Mounting Base

015112026
TM1A-C: RNCC: 3 | RNVC: 2

4 Aug 2003

5975-01-461-6809
Electrical Components Tie Down Strap

014616809
SST3S-C00: RNCC: 3 | RNVC: 2

23 Dec 1998

5975-01-461-4643
Blank Panel

014614643
11463986: RNCC: 3 | RNVC: 2

14 Dec 1998

5975-01-461-4048
Housing Section

014614048
11456304: RNCC: 3 | RNVC: 2

10 Dec 1998

5975-01-069-6592
Electrical Components Tie Down Strap

010696592
PLM2SCP: RNCC: 3 | RNVC: 2

20 Dec 1978

5975-00-833-7597
Electrical Conduit Union

008337597
EC200: RNCC: 3 | RNVC: 2

15 Sep 1967

5975-01-506-5235
Electrical Components Tie Down Strap

015065235
7130K572: RNCC: 3 | RNVC: 2

1 Apr 2003

5975-01-506-1421
Junction Box

015061421
G200664-2: RNCC: 3 | RNVC: 2

24 Mar 2003

5975-01-507-8881
Electronic Equipment Mounting Tray

015078881
52-04910-002: RNCC: 3 | RNVC: 2

7 May 2003

5975-01-508-5157
Electrical Components Tie Down Strap

015085157
SSC4H-S25-D: RNCC: 3 | RNVC: 2

22 May 2003

5975-01-508-5802
Electrical Equipment Cabinet

015085802
175991-B21: RNCC: 3 | RNVC: 2
EMA 1200S14: RNCC: 5 | RNVC: 2

27 May 2003

5975-01-458-8821
Electronic Junction Rack

014588821
60-032-01: RNCC: 3 | RNVC: 2

14 Sep 1998

5975-01-459-2235
Electrical Equipment Cabinet

014592235
304110-B22: RNCC: 3 | RNVC: 2

24 Sep 1998

5975-01-460-0942
Aircraft Shelf Assy

014600942
414E2073-5: RNCC: 3 | RNVC: 2

26 Oct 1998

5975-01-459-2239
Electrical Equipment Cabinet

014592239
304100-B21: RNCC: 3 | RNVC: 2

24 Sep 1998

5975-01-459-6750
Electrical-Electronic Equipment Chassis

014596750
EFP204A97: RNCC: 3 | RNVC: 2

9 Oct 1998

5975-01-460-1386
Electrical Equipment Mounting Base

014601386
827-5060-001: RNCC: 3 | RNVC: 2

27 Oct 1998

5975-00-520-8479
T Junction Box Assy

005208479
177D628-13: RNCC: 3 | RNVC: 2
177D628-13: RNCC: 3 | RNVC: 2
199C624G2: RNCC: 3 | RNVC: 2
199C624G2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-519-9006
Flexible Metal Conduit

005199006
WWC566: RNCC: 4 | RNVC: 1
C219414-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-521-1994
Flexible Metal Conduit Assembly

005211994
5116427-41: RNCC: 3 | RNVC: 2
5116427-41: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-1986
Flexible Metal Conduit Assembly

005211986
5116427-13: RNCC: 3 | RNVC: 2
5116427-13: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-534-3591
Cable Marker Sleeve

005343591
5343591: RNCC: 3 | RNVC: 2
5343591: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-534-3524
Cable Marker Sleeve

005343524
5343524: RNCC: 3 | RNVC: 2
5343524: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-201-2106
Electrical-Electronic Equipment Chassis

012012106
BCAB010D-001: RNCC: 3 | RNVC: 2
BCAB010D-002: RNCC: 3 | RNVC: 2

14 Feb 1985

5975-01-061-2182
Electrical Components Tie Down Strap

010612182
867153-0036: RNCC: 3 | RNVC: 2
867153-0036: RNCC: 3 | RNVC: 9

14 Jun 1978

5975-01-008-9955
Electrical-Electronic Equipment Chassis

010089955
G390796: RNCC: 3 | RNVC: 9
G390796: RNCC: 5 | RNVC: 9
G390796: RNCC: C | RNVC: 1

1 Sep 1975

5975-01-012-9211
Electrical Components Tie Down Strap

010129211
SST1-5SC: RNCC: 3 | RNVC: 2
0312131250: RNCC: 5 | RNVC: 2
SST1-5S-C10: RNCC: 5 | RNVC: 2

20 Nov 1975

5975-00-832-9698
Electrical Conduit

008329698
7445343-702: RNCC: 3 | RNVC: 2

4 Apr 1967

5975-01-504-3682
Cable Strain Relief Bushing

015043682
820482-11: RNCC: 3 | RNVC: 2

27 Jan 2003

5975-01-505-2449
Cable Shield Adapter

015052449
SEEPA-SPN250-W-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-505-4255
Junction Box

015054255
140403-A: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-01-506-3174
Electronic Equipment Mounting Tray

015063174
MT6-2300-104: RNCC: 3 | RNVC: 2

26 Mar 2003

5975-01-456-4444
Electrical Conduit Bushing

014564444
BBU50H: RNCC: 3 | RNVC: 9
8901-1: RNCC: 7 | RNVC: 2
BBU50H: RNCC: C | RNVC: 1

12 Jun 1998

5975-01-457-0317
Electrical Equipment Shelf

014570317
303606-B21: RNCC: 3 | RNVC: 2

8 Jul 1998

5975-00-512-0377
Radi Latch Fastener

005120377
420-99-0950: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-512-6946
Electric Conduit Assembly

005126946
TF54138: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-513-2422
Electrical Conduit Ferrule

005132422
S1110752-10: RNCC: 3 | RNVC: 2
11-3B10: RNCC: 5 | RNVC: 2
S1110752-10: RNCC: 5 | RNVC: 9
11-3B10: RNCC: 5 | RNVC: 9
019-1561-270: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-01-504-3644
Blank Panel

015043644
ADPHF01: RNCC: 3 | RNVC: 2

27 Jan 2003

5975-01-453-8404
Electrical Equipment Rack

014538404
PM8969/001: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-01-454-6200
Cable Marker Sleeve

014546200
708406-132: RNCC: 3 | RNVC: 2

7 Apr 1998

5975-00-511-6076
Conduit-Inner Wing

005116076
32-75035-59: RNCC: 3 | RNVC: 2

26 Jul 1974

5975-00-511-6074
Conduit-Inner Wing

005116074
32-75035-49: RNCC: 3 | RNVC: 2

26 Jul 1974

5975-00-501-3777
Electrical Conduit Ferrule

005013777
AC39B3335-6: RNCC: 3 | RNVC: 2
111-0750: RNCC: 5 | RNVC: 2
111-0750P: RNCC: 5 | RNVC: 2
111-0750: RNCC: 5 | RNVC: 9
111-0750P: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-501-2806
Electrical Equipment Cabinet

015012806
H9A10-MC: RNCC: 3 | RNVC: 2

27 Sep 2002

5975-01-501-6967
Electrical-Electronic Equipment Panel

015016967
CCH-CP06-25T: RNCC: 3 | RNVC: 2

10 Oct 2002

5975-01-501-5774
Electrical Equipment Mounting Base

015015774
11039-1600-01: RNCC: 3 | RNVC: 2

7 Oct 2002

5975-01-502-0640
Ethernet Bridge

015020640
31145-41-B1/B2-5755/5820MHZ: RNCC: 3 | RNVC: 2

24 Oct 2002

5975-01-503-1850
Electrical-Electronic Equipment Chassis

015031850
PXI 1000B: RNCC: 3 | RNVC: 2

6 Dec 2002

5975-01-451-9452
Cable Marker Sleeve

014519452
013-007382-034: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-414-8775
Electrical Equipment Mounting Base

014148775
165881: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-01-010-8912
Electrical Box Connector

010108912
DB-14118-L: RNCC: 3 | RNVC: 2
327767-45: RNCC: 5 | RNVC: 9
327767-45: RNCC: 7 | RNVC: 2

9 Oct 1975

5975-01-450-8534
Electrical Equipment Mounting Base

014508534
822-0594-001: RNCC: 3 | RNVC: 2
S433A10T0001: RNCC: 5 | RNVC: 2
822-0594-001: RNCC: 5 | RNVC: 2
822-0594-001: RNCC: 5 | RNVC: 2

24 Nov 1997

5975-01-451-3900
Electrical-Electronic Equipment Chassis

014513900
995-7816-030: RNCC: 3 | RNVC: 2

15 Dec 1997

5975-01-450-5102
Electrical Equipment Drawer

014505102
098548-0100: RNCC: 3 | RNVC: 2

13 Nov 1997

5975-01-451-9444
Cable Marker Sleeve

014519444
013-007382-023: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-414-3403
Dust And Moisture Seal Boot

014143403
200-801-04: RNCC: 3 | RNVC: 2
C900987Q: RNCC: 5 | RNVC: 2

5 Jun 1995

5975-01-007-8695
Electrical Components Tie Down Strap

010078695
G470074-2: RNCC: 3 | RNVC: 2

10 Aug 1975

5975-01-498-6338
Junction Box Cover

014986338
12464: RNCC: 3 | RNVC: 9
12464: RNCC: C | RNVC: 1

29 Jun 2002

5975-01-498-5359
Electrical Equipment Rack

014985359
5HK01701-103: RNCC: 3 | RNVC: 2

29 Jun 2002

Load More Results