What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 170 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 170 of 176

5975-01-652-2893
Electronic Equipment Mounting Tray

016522893
68T047914-2013: RNCC: 3 | RNVC: 2

17 Feb 2016

5975-01-651-9330
Electrical Components Tie Down Strap

016519330
S-13700BL: RNCC: 3 | RNVC: 2

4 Feb 2016

5975-01-652-5479
Junction Box Cover

016525479
3365387-5: RNCC: 3 | RNVC: 2

26 Feb 2016

5975-01-653-2876
Electrical-Electronic Equipment Chassis

016532876
NEXSTAR HX4R: RNCC: 3 | RNVC: 2

17 Mar 2016

5975-01-653-6820
Cable Terminal Chamber

016536820
8006767: RNCC: 3 | RNVC: 2

1 Apr 2016

5975-01-655-6437
Electrical-Electronic Equipment Chassis

016556437
84-01099: RNCC: 3 | RNVC: 2

3 Jun 2016

5975-01-654-5977
Electrical Grounding Plate

016545977
SE9612: RNCC: 3 | RNVC: 2

3 May 2016

5975-01-276-0110
Electrical-Electronic Equipment Panel

012760110
10121-3005: RNCC: 3 | RNVC: 2

2 Apr 1988

5975-01-020-5757
Cable Hanger

010205757
313448-1: RNCC: 3 | RNVC: 9
313448-1: RNCC: C | RNVC: 1

1 May 1976

5975-01-567-5040
Electrical-Electronic Equipment Chassis

015675040
WS-C4503-E: RNCC: 3 | RNVC: 2
WS-C4503-E: RNCC: 5 | RNVC: 2

29 Sep 2008

5975-01-567-2712
Electrical-Electronic Equipment Chassis

015672712
GH476AV: RNCC: 3 | RNVC: 2

22 Sep 2008

5975-01-568-0233
Bond Strip

015680233
3184682-600: RNCC: 3 | RNVC: 2
M0002239: RNCC: 5 | RNVC: 2
M0002239: RNCC: 5 | RNVC: 2

16 Oct 2008

5975-01-567-0537
Blank Panel

015670537
3106040002: RNCC: 3 | RNVC: 9

16 Sep 2008

5975-01-587-8695
Electrical-Electronic Equipment Panel

015878695
68A770141-9WAA: RNCC: 3 | RNVC: 2

24 Aug 2010

5975-01-450-2703
Electrical-Electronic Equipment Panel

014502703
13220134: RNCC: 3 | RNVC: 2

31 Oct 1997

5975-01-450-8532
Electrical Equipment Mounting Base

014508532
822-0595-001: RNCC: 3 | RNVC: 2

24 Nov 1997

5975-01-442-1827
Electrical-Electronic Equipment Chassis

014421827
296797: RNCC: 3 | RNVC: 9

6 Mar 1997

5975-01-353-0344
Electrical Nonmetallic Conduit Assembly

013530344
5497312-19: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-651-7590
Interior Cable Rack

016517590
HLS1018B: RNCC: 3 | RNVC: 2

29 Jan 2016

5975-01-015-9240
Electrical Conductor Bushing

010159240
CA39056-3C22: RNCC: 3 | RNVC: 2
CA18220-106: RNCC: 5 | RNVC: 2
CA18220-6C22: RNCC: 5 | RNVC: 2

30 Jan 1976

5975-01-101-4461
Electrical Equipment Mounting Base

011014461
3322190: RNCC: 3 | RNVC: 9
3322190: RNCC: 5 | RNVC: 2
92060-3: RNCC: 5 | RNVC: 2
92060-3: RNCC: 5 | RNVC: 9

30 Sep 1980

5975-01-651-1948
Electrical-Electronic Equipment Panel

016511948
43902-001: RNCC: 3 | RNVC: 2

8 Jan 2016

5975-01-650-4996
Electrical Components Tie Down Strap

016504996
MS3368-6-9E: RNCC: 3 | RNVC: 2
MS3368-6-9E: RNCC: 3 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9
MS3368-6-9E: RNCC: 5 | RNVC: 9

7 Dec 2015

5975-01-324-1521
Electrical-Electronic Equipment Chassis

013241521
63C51282G1: RNCC: 3 | RNVC: 2

11 Aug 1990

5975-01-585-6136
Electrical Equipment Rack Base

015856136
KEY-R19-SRS2: RNCC: 3 | RNVC: 2

29 May 2010

5975-01-584-6041
Electrical Equipment Cabinet

015846041
IN-PX101089V61: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-585-8428
Electrical Equipment Mounting Base

015858428
108091: RNCC: 3 | RNVC: 2

8 Jun 2010

5975-01-585-6869
Flexible Metal Conduit

015856869
750-069-20-E: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-585-9809
Electrical Components Tie Down Strap

015859809
H-06-1PK-BK: RNCC: 3 | RNVC: 2

14 Jun 2010

5975-01-449-2196
Electrical Equipment Mounting Base

014492196
11442502: RNCC: 3 | RNVC: 2

23 Sep 1997

5975-01-449-6949
Electrical Wall Plate

014496949
7425WOA: RNCC: 3 | RNVC: 2
1221732: RNCC: 5 | RNVC: 2

9 Oct 1997

5975-01-448-2991
Bite And Control Su

014482991
2855914-1: RNCC: 3 | RNVC: 2

26 Aug 1997

5975-01-449-5780
Electrical-Electronic Equipment Chassis

014495780
468003-1: RNCC: 3 | RNVC: 2

6 Oct 1997

5975-01-342-6983
Electrical Cable Nipple

013426983
2159552-5: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6039
Cable Marker Sleeve

013426039
651036-129: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-343-9328
Electrical Equipment Cabinet

013439328
765313-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-5135
Transmission Line Grounding Set

013435135
13231: RNCC: 3 | RNVC: 9

14 Aug 1991

5975-00-935-9566
Electrical Box Connector

009359566
NC410: RNCC: 3 | RNVC: 2
574: RNCC: 5 | RNVC: 9

21 Feb 1969

5975-01-097-4699
Blank Panel

010974699
40176: RNCC: 3 | RNVC: 9

12 Jul 1980

5975-01-468-1656
Guide Rail

014681656
RC11090-43P: RNCC: 3 | RNVC: 2
9D0090-43P: RNCC: 5 | RNVC: 2

30 Sep 1999

5975-01-468-9204
Flexible Metal Conduit Assembly

014689204
200180-0038: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-9207
Flexible Metal Conduit Assembly

014689207
200180-0024: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-9205
Flexible Metal Conduit Assembly

014689205
200180-0016: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-322-9100
Electrical-Electronic Equipment Chassis

013229100
709341-2: RNCC: 3 | RNVC: 2

17 Jul 1990

5975-01-584-9009
Junction Box

015849009
01233311: RNCC: 3 | RNVC: 2

10 May 2010

5975-01-449-5442
Junction Box

014495442
8221-1: RNCC: 3 | RNVC: 2

4 Oct 1997

5975-01-450-0451
Guide Rail

014500451
RC11090-20P: RNCC: 3 | RNVC: 2

25 Oct 1997

5975-01-450-0450
Guide Rail

014500450
RC11090-27P: RNCC: 3 | RNVC: 2

25 Oct 1997

5975-01-337-3616
Vault Pro Reset Box

013373616
52339101-10: RNCC: 3 | RNVC: 2
52339101-10: RNCC: 5 | RNVC: 9

14 Apr 1991

5975-01-340-1380
Cable Marker Sleeve

013401380
506658-6: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2674
Electrical Components Tie Down Strap

013402674
506657-29: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-339-3464
Electrical Equipment Rack

013393464
02-795837-2: RNCC: 3 | RNVC: 1
02-795837-2TR: RNCC: 5 | RNVC: 2

21 May 1991

5975-01-340-1155
Electrical Conduit Adapter

013401155
3417-1-2: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-341-1038
Electrical Cable Nipple

013411038
M480: RNCC: 3 | RNVC: 2

25 Jun 1991

5975-01-341-1037
Junction Box

013411037
0044-4300: RNCC: 3 | RNVC: 2

25 Jun 1991

5975-00-189-4703
Cable Marker Sleeve

001894703
0N057432-26: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-01-007-7317
Tract Adj Spring

010077317
3168526-00: RNCC: 3 | RNVC: 2

9 Aug 1975

5975-01-580-9325
Electrical Equipment Cabinet

015809325
507019-B21: RNCC: 3 | RNVC: 2
CHA-SERV-7000: RNCC: 5 | RNVC: 2

30 Dec 2009

5975-01-581-2809
Electrical Equipment Mounting Base

015812809
STK-RACKMOUNT-1RU: RNCC: 3 | RNVC: 2
800-05714-01: RNCC: 5 | RNVC: 9

12 Jan 2010

5975-01-581-4015
Electrical Components Tie Down Strap

015814015
10049: RNCC: 3 | RNVC: 2

14 Jan 2010

5975-01-582-7218
Electronic Equipment Mounting Tray

015827218
2100-8006-00: RNCC: 3 | RNVC: 2

3 Mar 2010

5975-01-582-0822
Electrical Equipment Mounting Base

015820822
080703028-1.0.0: RNCC: 3 | RNVC: 2

8 Feb 2010

5975-01-582-3202
Electronic Equipment Mounting Tray

015823202
ES122582-3: RNCC: 3 | RNVC: 2

16 Feb 2010

5975-01-582-6153
Electrical Tie Down Mounting Base

015826153
NMCSB7000UG2NH2: RNCC: 3 | RNVC: 2

27 Feb 2010

5975-01-463-4843
Flexible Metal Conduit

014634843
8212-19: RNCC: 3 | RNVC: 2
8212: RNCC: D | RNVC: 9

24 Mar 1999

5975-01-448-0861
Ground Rod

014480861
33-103129-01: RNCC: 3 | RNVC: 2
33-103129-01: RNCC: 5 | RNVC: 9

20 Aug 1997

5975-01-334-5438
Electrical-Electronic Equipment Chassis

013345438
648Z1471-1: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-333-9015
Radio Frequency Cable Splicing Kit

013339015
D-150-14: RNCC: 3 | RNVC: 2

11 Feb 1991

5975-01-336-1098
Electrical-Electronic Equipment Chassis

013361098
30320-1: RNCC: 3 | RNVC: 2

20 Mar 1991

5975-01-007-8376
Electrical Components Tie Down Strap

010078376
SSC2-0: RNCC: 3 | RNVC: 2
137614: RNCC: 5 | RNVC: 9

9 Aug 1975

5975-01-007-9910
Electrical Components Tie Down Strap

010079910
MS3368-1-9C: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

15 Aug 1975

5975-01-465-8831
Cable Marker Sleeve

014658831
13076094-3: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-01-465-6814
Electrical-Electronic Equipment Chassis

014656814
3C35100: RNCC: 3 | RNVC: 9

17 Jun 1999

5975-01-466-4611
Electrical-Electronic Equipment Chassis

014664611
3500437: RNCC: 3 | RNVC: 2

20 Jul 1999

5975-00-501-0573
Electrical Conduit Coupling Nut

005010573
43A13595: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-578-8319
Electrical-Electronic Equipment Chassis

015788319
77427000-009: RNCC: 3 | RNVC: 2

21 Oct 2009

5975-01-579-0141
Electrical-Electronic Equipment Chassis

015790141
SPT-2000A-HS: RNCC: 3 | RNVC: 2

28 Oct 2009

5975-01-580-0721
Transit Frame

015800721
B-4X1 GALV: RNCC: 3 | RNVC: 2

3 Dec 2009

5975-01-581-2707
Electrical Equipment Rack

015812707
RX1727-1: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-581-5701
Junction Box Cover

015815701
915689-2: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-461-4973
Electrical-Electronic Equipment Chassis

014614973
522-3060-003: RNCC: 3 | RNVC: 2

15 Dec 1998

5975-01-463-4844
Flexible Metal Conduit

014634844
8212-20: RNCC: 3 | RNVC: 2
8212: RNCC: D | RNVC: 9

24 Mar 1999

5975-01-463-6452
Electrical Wall Plate

014636452
CNN3568L: RNCC: 3 | RNVC: 2

30 Mar 1999

5975-00-989-2006
Electrical Equipment Cabinet

009892006
DL2613: RNCC: 3 | RNVC: 1
CR1744HG: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-989-2009
Electrical Box Connector

009892009
SP5310: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-086-6654
Electrical Components Tie Down Strap

010866654
10S300-2-94: RNCC: 3 | RNVC: 9
10S300-2-94: RNCC: C | RNVC: 1

1 Dec 1979

5975-01-086-6656
Electrical Components Tie Down Strap

010866656
10S300-2-96: RNCC: 3 | RNVC: 9
10S300-2-96: RNCC: C | RNVC: 1

1 Dec 1979

5975-01-463-3837
Electrical Equipment Rack

014633837
03-05144-001: RNCC: 3 | RNVC: 2

18 Mar 1999

5975-01-463-4845
Flexible Metal Conduit

014634845
8212-24: RNCC: 3 | RNVC: 2
8212: RNCC: D | RNVC: 9

24 Mar 1999

5975-01-463-0445
Flexible Metal Conduit Assembly

014630445
254874-0001: RNCC: 3 | RNVC: 2
749-230-4: RNCC: 3 | RNVC: 2
5D0238-1: RNCC: 5 | RNVC: 2
749-230: RNCC: 5 | RNVC: 9

3 Mar 1999

5975-00-015-6012
Electrical Entrance Elbow

000156012
TYPE I STYLE LB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
SLB2: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9

17 Oct 1972

5975-00-503-0792
Electrical Equipment Cabinet

005030792
CY1221G: RNCC: 3 | RNVC: 2
SMD155564: RNCC: 3 | RNVC: 2
MILR11539: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-503-0790
Electrical Equipment Cabinet

005030790
CY979URR: RNCC: 3 | RNVC: 2
D14261: RNCC: 5 | RNVC: 2
D14261: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-0804
Electrical Equipment Cabinet

005030804
114X1622: RNCC: 3 | RNVC: 2
CY1216U: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-576-6455
Me Conduit Assembly

015766455
RR646-3: RNCC: 3 | RNVC: 2

10 Aug 2009

5975-01-577-5985
Electrical Equipment Rack

015775985
NEMA-4: RNCC: 3 | RNVC: 2

14 Sep 2009

5975-01-459-8641
Electrical-Electronic Equipment Chassis

014598641
001956-0: RNCC: 3 | RNVC: 9

16 Oct 1998

5975-01-460-0641
Electrical-Electronic Equipment Chassis

014600641
751-7517-004: RNCC: 3 | RNVC: 2

23 Oct 1998

5975-01-459-2611
Electronic Equipment Mounting Tray

014592611
542801-1: RNCC: 3 | RNVC: 2
542801A: RNCC: 5 | RNVC: 2

25 Sep 1998

5975-01-461-2232
Electrical-Electronic Equipment Chassis

014612232
RA-1C: RNCC: 3 | RNVC: 2
2002700011: RNCC: 5 | RNVC: 2

3 Dec 1998

5975-00-601-3143
Stud Assy

006013143
A10332: RNCC: 3 | RNVC: 2
1-6654-000-000: RNCC: 3 | RNVC: 2
A10332A: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-603-6258
Electrical Equipment Mounting Base

006036258
QG29B6: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-461-3120
Rackmount Kit

014613120
E7709A: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-460-9793
Cable Strain Relief Bushing

014609793
613129: RNCC: 3 | RNVC: 2

23 Nov 1998

5975-01-461-3540
Electrical Conduit Tee

014613540
227091-F500000A: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-01-461-4641
Base Electr Unit

014614641
11463255-2: RNCC: 3 | RNVC: 2

14 Dec 1998

5975-01-458-9536
Electrical-Electronic Equipment Chassis

014589536
16U75610-41: RNCC: 3 | RNVC: 2

16 Sep 1998

5975-01-406-7528
Cable Marker Sleeve

014067528
SS7095-5004: RNCC: 3 | RNVC: 2

11 Jan 1995

5975-00-581-1440
Blank Panel

005811440
9032374: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-007-1319
Electrical Cable Nipple

000071319
SMC568468-1: RNCC: 3 | RNVC: 2

6 Jul 1972

5975-00-498-4892
Electrical-Electronic Equipment Chassis

004984892
780-0932-001: RNCC: 3 | RNVC: 2

8 Oct 1969

5975-00-489-6195
Electrical Components Tie Down Strap

004896195
MS3368-2-2: RNCC: 2 | RNVC: 2

25 May 1970

5975-01-610-5853
Cable Strain Relief Bushing

016105853
7680K26: RNCC: 3 | RNVC: 2

22 Aug 2012

5975-01-610-6163
Junction Box

016106163
92550-01307: RNCC: 3 | RNVC: 2

23 Aug 2012

5975-01-174-4012
Electrical-Electronic Equipment Chassis

011744012
229-026230-02: RNCC: 3 | RNVC: 2
229-026230-01: RNCC: 5 | RNVC: 9

17 Mar 1984

5975-00-581-0768
Conduit Outlet Cover

005810768
DS70G: RNCC: 3 | RNVC: 2
13217E3887: RNCC: 5 | RNVC: 2
202: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-514-3301
Electrical Conduit Adapter

015143301
M55399/03-00027: RNCC: 4 | RNVC: 1

22 Oct 2003

5975-01-459-6327
Electrical-Electronic Equipment Chassis

014596327
AQ2012001: RNCC: 3 | RNVC: 9

8 Oct 1998

5975-00-475-1846
Electrical Equipment Cabinet

004751846
BL1886-1-1: RNCC: 3 | RNVC: 2
9192720: RNCC: 7 | RNVC: 2

1 Jan 1961

5975-01-609-6929
Electrical Conduit Coupling Nut Clamp

016096929
DS0611-2D: RNCC: 3 | RNVC: 2

1 Aug 2012

5975-01-609-7858
Electrical Wall Plate

016097858
1293645-1: RNCC: 3 | RNVC: 2

2 Aug 2012

5975-01-400-2310
Electrical Equipment Rack

014002310
MVME955C: RNCC: 3 | RNVC: 9

12 Dec 1994

5975-01-400-2339
Electrical-Electronic Equipment Chassis

014002339
A1897A: RNCC: 3 | RNVC: 2
A1897A: RNCC: 3 | RNVC: 9
A1897A: RNCC: 5 | RNVC: 9
A1897A: RNCC: 5 | RNVC: 9

12 Dec 1994

5975-01-399-6800
Electrical Box Connector

013996800
BB100-1W: RNCC: 3 | RNVC: 2

2 Dec 1994

5975-00-602-6736
Electrical Conduit Coupling Nut

006026736
118-22B20: RNCC: 3 | RNVC: 2
118-22B20: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-513-5973
Electrical Equipment Rack

015135973
120601-0001: RNCC: 3 | RNVC: 2
58353 00100: RNCC: 5 | RNVC: 2

30 Sep 2003

5975-01-513-6005
Electrical Equipment Rack

015136005
120599-0001: RNCC: 3 | RNVC: 2
58353 00300: RNCC: 5 | RNVC: 2

30 Sep 2003

5975-01-514-7801
Flexible Nonmetallic Conduit

015147801
749-656-3-36.05: RNCC: 3 | RNVC: 2
5D0555-5: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-514-6820
Electrical Conduit Bushing

015146820
CDC00195: RNCC: 3 | RNVC: 9
CDC00195: RNCC: C | RNVC: 1

31 Oct 2003

5975-01-309-1126
Electrical-Electronic Equipment Chassis

013091126
03-05152-001: RNCC: 3 | RNVC: 2

11 Oct 1989

5975-01-310-5126
Electrical Conductor Bushing

013105126
11466102-13: RNCC: 3 | RNVC: 2
10-242999-135: RNCC: 5 | RNVC: 2

6 Nov 1989

5975-01-606-4491
Junction Box

016064491
009109: RNCC: 3 | RNVC: 2

18 May 2012

5975-01-607-3866
Electrical Equipment Cabinet

016073866
STK-RPS-CH2: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-607-3910
Electrical Fitting Mounting Base

016073910
MT4-3333-101: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-608-7943
Electrical Equipment Cabinet

016087943
098815-0001: RNCC: 3 | RNVC: 2

11 Jul 2012

5975-01-609-1486
Junction Box

016091486
BJ4TERM: RNCC: 3 | RNVC: 2

18 Jul 2012

5975-01-608-8354
Electrical Equipment Mounting Base

016088354
810725: RNCC: 3 | RNVC: 2
900706: RNCC: 5 | RNVC: 2

13 Jul 2012

5975-01-609-1962
Cable Marker Sleeve

016091962
TMS-SCE-3/4-2.0-0: RNCC: 3 | RNVC: 2

19 Jul 2012

5975-01-608-9892
Electrical Components Tie Down Strap

016089892
60009-025: RNCC: 3 | RNVC: 2
5975PL1582590: RNCC: 6 | RNVC: 9

13 Jul 2012

5975-01-455-0709
Electrical-Electronic Equipment Panel

014550709
70-27050-01: RNCC: 3 | RNVC: 2

21 Apr 1998

5975-01-454-6262
Electrical-Electronic Equipment Chassis

014546262
717769857-001: RNCC: 3 | RNVC: 2

7 Apr 1998

5975-01-509-7668
Junction Box

015097668
123AV50323-39: RNCC: 3 | RNVC: 2
123AV50323-39: RNCC: 5 | RNVC: 9

2 Jul 2003

5975-01-510-3904
Hoisting Appliance

015103904
SL10: RNCC: 3 | RNVC: 2

18 Jul 2003

5975-01-510-8705
Electrical Equipment Rack

015108705
6C107: RNCC: 3 | RNVC: 2

28 Jul 2003

5975-00-326-9075
Flexible Metal Conduit Assembly

003269075
5334403-870: RNCC: 3 | RNVC: 2
5334403-870: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-605-1763
Electrical-Electronic Equipment Chassis

016051763
850-10952-AC: RNCC: 3 | RNVC: 9

16 Apr 2012

5975-01-510-8709
Electrical Equipment Mounting Base

015108709
AS/8500: RNCC: 3 | RNVC: 2
AS/8500: RNCC: 5 | RNVC: 2

28 Jul 2003

5975-01-451-9446
Cable Marker Sleeve

014519446
013-007382-019: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-452-7161
Fanning Strip

014527161
LS5957A014: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-01-397-7754
Rigid Metal Conduit

013977754
1310-0101-13: RNCC: 3 | RNVC: 2
1310-0101-13: RNCC: 5 | RNVC: 9

20 Oct 1994

5975-01-398-1888
Rigid Metal Conduit

013981888
1310-0101-35: RNCC: 3 | RNVC: 2
1310-0101-35: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-397-5168
Rigid Metal Conduit

013975168
1310-0101-6: RNCC: 3 | RNVC: 2
1310-0101-6: RNCC: 5 | RNVC: 9

13 Oct 1994

5975-01-398-1456
Rigid Metal Conduit

013981456
1310-0101-32: RNCC: 3 | RNVC: 2
1310-0101-32: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-397-8663
Rigid Metal Conduit

013978663
1310-0101-23: RNCC: 3 | RNVC: 2
1310-0101-23: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-181-2196
Electrical-Electronic Equipment Chassis

011812196
3322211: RNCC: 3 | RNVC: 2
3322211: RNCC: 3 | RNVC: 9

7 Jun 1984

5975-01-508-4988
Electrical-Electronic Equipment Panel

015084988
910149-7: RNCC: 3 | RNVC: 2

22 May 2003

5975-01-604-6085
Electrical Equipment Mounting Base

016046085
118945-001: RNCC: 3 | RNVC: 2

10 Apr 2012

5975-01-508-4985
Electrical-Electronic Equipment Panel

015084985
910147-2: RNCC: 3 | RNVC: 2

22 May 2003

5975-01-509-6175
Electrical Conduit Coupling

015096175
L128: RNCC: 3 | RNVC: 2

26 Jun 2003

5975-01-510-3862
Flexible Metal Conduit Assembly

015103862
759-707: RNCC: 3 | RNVC: 2

18 Jul 2003

5975-01-311-6102
Cable Marker Sleeve

013116102
013-006060-054: RNCC: 3 | RNVC: 2

1 Dec 1989

5975-01-382-9330
Electrical Equipment Rack

013829330
4361A1: RNCC: 3 | RNVC: 9

12 Nov 1993

5975-01-506-8759
Electrical-Electronic Equipment Chassis

015068759
8019723: RNCC: 3 | RNVC: 2

11 Apr 2003

5975-01-508-7110
Insulator Bracket

015087110
046-500647-00: RNCC: 3 | RNVC: 2

30 May 2003

5975-01-335-6545
Electrical Equipment Rack

013356545
86421046-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-335-6548
Electrical Equipment Rack

013356548
86421481-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-603-3495
Junction Box

016033495
500-100-1002: RNCC: 3 | RNVC: 2

29 Feb 2012

5975-01-311-8636
Electrical Equipment Mounting Base

013118636
RAT 400SM: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-331-4414
Electrical Equipment Cabinet Case

013314414
130-0811-001: RNCC: 3 | RNVC: 2
130-0811-001: RNCC: 3 | RNVC: 9

20 Dec 1990

5975-01-202-3790
Blank Panel

012023790
505437: RNCC: 3 | RNVC: 2
505437: RNCC: 5 | RNVC: 9

1 Mar 1985

5975-00-772-2341
Electrical Conduit Elbow

007722341
0-40695-221: RNCC: 3 | RNVC: 2
7722341: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-505-9495
Electrical-Electronic Equipment Panel

015059495
G006-1112-01: RNCC: 3 | RNVC: 2

19 Mar 2003

5975-01-506-6050
Electrical-Electronic Equipment Chassis

015066050
CR200P: RNCC: 3 | RNVC: 2
CR200P: RNCC: 5 | RNVC: 2

3 Apr 2003

5975-01-506-2318
Electrical Equipment Mounting Base

015062318
74A880642-1003: RNCC: 3 | RNVC: 2

25 Mar 2003

5975-01-561-9819
Splice Box Assy

015619819
237488-0001: RNCC: 3 | RNVC: 2

25 Mar 2008

5975-01-506-6918
Electrical-Electronic Equipment Chassis

015066918
37275-19: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-312-1854
Electrical Equipment Cabinet

013121854
8460880-1: RNCC: 3 | RNVC: 2

12 Dec 1989

5975-01-316-4323
Electrical-Electronic Equipment Panel

013164323
030781: RNCC: 3 | RNVC: 9
030781: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-01-310-9440
Earth Rod

013109440
174211417-301: RNCC: 3 | RNVC: 2
174211417-301: RNCC: 5 | RNVC: 9

16 Nov 1989

5975-00-689-5129
Junction Box

006895129
2082533-1: RNCC: 3 | RNVC: 2

29 Jan 1968

5975-01-525-2211
Flexible Nonmetallic Conduit

015252211
749-656-6-3: RNCC: 3 | RNVC: 2
5D0562-3: RNCC: 5 | RNVC: 2

1 Nov 2004

5975-01-526-9273
Flexible Metal Conduit Assembly

015269273
363844-3: RNCC: 3 | RNVC: 2

12 Jan 2005

5975-01-331-4413
Electrical Equipment Cabinet Case

013314413
130-0797-001: RNCC: 3 | RNVC: 2
130-0797-001: RNCC: 3 | RNVC: 9

20 Dec 1990

5975-01-332-0441
Electrical-Electronic Equipment Panel

013320441
52061-0002: RNCC: 3 | RNVC: 2

2 Jan 1991

5975-01-558-8319
Electrical Equipment Rack

015588319
2218001-201: RNCC: 3 | RNVC: 2

26 Nov 2007

5975-01-558-8325
Electrical-Electronic Equipment Panel

015588325
2218027-001: RNCC: 3 | RNVC: 2

26 Nov 2007

5975-01-559-3372
Electrical Equipment Rack

015593372
125330-1: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-560-4201
Electrical Equipment Cabinet

015604201
522-3248-001: RNCC: 3 | RNVC: 2

29 Jan 2008

5975-01-504-7139
Electrical-Electronic Equipment Chassis

015047139
646R656H01: RNCC: 3 | RNVC: 2

6 Feb 2003

5975-01-505-1775
Electrical-Electronic Equipment Chassis

015051775
12019-5000-01: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-505-3148
Electrical Equipment Rack

015053148
8861698: RNCC: 3 | RNVC: 2

3 Mar 2003

5975-01-662-7939
Metallic Raceway

016627939
ACAC10005: RNCC: 3 | RNVC: 2

20 Apr 2017

5975-01-663-0087
Bus Bar Cover

016630087
738N3P05: RNCC: 3 | RNVC: 2

24 Apr 2017

5975-01-664-3854
Electrical Cable Protector

016643854
PWR-CAB-H203: RNCC: 3 | RNVC: 2
PWR-CAB-H203: RNCC: 3 | RNVC: 9

16 Jun 2017

5975-01-663-9520
Flexible Metal Conduit

016639520
309D030-2: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-524-6745
Rigid Metal Conduit

015246745
205A396-2: RNCC: 3 | RNVC: 2

12 Oct 2004

5975-01-521-5944
Electrical-Electronic Equipment Chassis

015215944
G211B00684-3: RNCC: 3 | RNVC: 2

25 Jun 2004

5975-01-523-6015
Electrical Tie Down Mounting Base

015236015
CB4020C3NB6: RNCC: 3 | RNVC: 2

9 Sep 2004

5975-01-328-2811
Electrical Equipment Cabinet

013282811
463777-1: RNCC: 3 | RNVC: 2

30 Oct 1990

5975-01-328-9621
Electrical Equipment Rack

013289621
PB16H: RNCC: 3 | RNVC: 2

11 Nov 1990

5975-01-555-9671
Electrical Equipment Mounting Base

015559671
966240-101: RNCC: 3 | RNVC: 2

19 Sep 2007

5975-01-556-0915
Electronic Junction Rack

015560915
8002333-10: RNCC: 3 | RNVC: 9

24 Sep 2007

5975-01-557-7599
Rigid Metal Conduit Assembly

015577599
3338688-1: RNCC: 3 | RNVC: 2

27 Oct 2007

5975-01-557-4182
Electrical Equipment Rack

015574182
AF054A: RNCC: 3 | RNVC: 2
AF054A: RNCC: 5 | RNVC: 2
AF054AR: RNCC: 5 | RNVC: 2
AF054A: RNCC: 5 | RNVC: 2

22 Oct 2007

5975-01-557-1315
Electronic Equipment Mounting Tray

015571315
VA-008921-0001: RNCC: 3 | RNVC: 2

12 Oct 2007

5975-01-502-0639
Ehternet Bridge

015020639
31145-41-A1/A2-5733/5800MHZ: RNCC: 3 | RNVC: 2

24 Oct 2002

5975-01-501-7983
Electrical-Electronic Equipment Chassis

015017983
110835: RNCC: 3 | RNVC: 2

16 Oct 2002

5975-01-632-8814
Raceway Cover

016328814
T70EEIW: RNCC: 3 | RNVC: 2

31 Oct 2014

5975-00-702-4060
Ground Rod

007024060
66456: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-521-5551
Electrical-Electronic Equipment Chassis

015215551
95CD0153-1: RNCC: 3 | RNVC: 2

24 Jun 2004

5975-00-518-4971
Electrical Equipment Cabinet

005184971
RX303151-1: RNCC: 3 | RNVC: 2
CY1372/URN3: RNCC: 5 | RNVC: 2
A2141001: RNCC: 5 | RNVC: 2
J2143280: RNCC: 5 | RNVC: 2
RX303151-1A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-555-9630
Electrical Wall Plate

015559630
MX-FP-S-04-SS-L: RNCC: 3 | RNVC: 2

19 Sep 2007

5975-01-498-7181
Rigid Metal Conduit Assembly

014987181
5HB71102-289: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7203
Rigid Metal Conduit Assembly

014987203
5HB71102-283: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-630-5222
Junction Box

016305222
J1412HPL: RNCC: 3 | RNVC: 2

7 Aug 2014

5975-01-631-4201
Electrical-Electronic Equipment Panel

016314201
68A810412-1019: RNCC: 3 | RNVC: 2

13 Sep 2014

5975-01-628-7934
Interior Cable Rack

016287934
HLWRK: RNCC: 3 | RNVC: 2

10 Jun 2014

5975-01-628-9867
Electronic Equipment Mounting Tray

016289867
MT6-4376-101 REVC00: RNCC: 3 | RNVC: 2
S935C10T1004: RNCC: 5 | RNVC: 2

17 Jun 2014

5975-01-519-8268
Electrical Tie Down Mounting Base

015198268
CB3019AA2NP: RNCC: 3 | RNVC: 2

3 May 2004

5975-01-520-3158
Electronic Equipment Mounting Tray

015203158
200-89564-101: RNCC: 3 | RNVC: 2

7 May 2004

5975-01-519-7602
Electrical-Electronic Equipment Chassis

015197602
811R316G02: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-520-5426
Junction Box

015205426
377-07357-000: RNCC: 3 | RNVC: 2
377-07357-000: RNCC: 5 | RNVC: 2

14 May 2004

5975-01-519-6110
Electrical Equipment Rack

015196110
16E5350-801: RNCC: 3 | RNVC: 2
16E5053-801FA01: RNCC: 5 | RNVC: 2
16E5350-801FA01: RNCC: 5 | RNVC: 2

26 Apr 2004

5975-01-358-9925
Electrical Conduit Adapter

013589925
710DS004B2220: RNCC: 3 | RNVC: 2
710DS004B22-20: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-362-4735
Electrical-Electronic Equipment Panel

013624735
924000020-019: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-553-5396
Electrical Equipment Rack

015535396
KC84034-001: RNCC: 3 | RNVC: 2

18 Jul 2007

5975-01-554-2677
Transmission Line Grounding Set

015542677
7223K15: RNCC: 3 | RNVC: 2

3 Aug 2007

5975-01-587-1443
Electrical-Electronic Equipment Chassis

015871443
071-04021-0001: RNCC: 3 | RNVC: 2

26 Jul 2010

5975-01-498-5239
Electrical Equipment Rack

014985239
D5989C: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-6297
Electrical Equipment Cabinet

014986297
12315: RNCC: 3 | RNVC: 9
12315: RNCC: C | RNVC: 1

29 Jun 2002

5975-01-625-9022
Ground Rod

016259022
H96-0002-250: RNCC: 3 | RNVC: 2

20 Feb 2014

5975-01-628-2514
Nonmetallic Raceway Assembly

016282514
WMPLFSE: RNCC: 3 | RNVC: 2

15 May 2014

5975-01-625-4896
Metallic Raceway

016254896
80038800025: RNCC: 3 | RNVC: 9

5 Feb 2014

5975-01-628-0432
Electronic Equipment Mounting Tray

016280432
310329: RNCC: 3 | RNVC: 2
310329: RNCC: 5 | RNVC: 2
RS-4AF-16SF: RNCC: 5 | RNVC: 2

7 May 2014

5975-01-627-3982
Electrical-Electronic Equipment Chassis

016273982
44354-1: RNCC: 3 | RNVC: 2

12 Apr 2014

5975-01-627-9718
Guide Rail

016279718
G-001-11152-CR: RNCC: 3 | RNVC: 2

5 May 2014

5975-00-669-9673
Electrical Conduit Coupling Nut

006699673
503516: RNCC: 3 | RNVC: 2
BREX2PT503516: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-9827
Junction Box

006699827
15D13: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-517-8254
Electrical Equipment Mounting Base

015178254
111-5055: RNCC: 3 | RNVC: 2

20 Feb 2004

5975-01-518-9257
Electrical-Electronic Equipment Panel

015189257
622-5048-361: RNCC: 3 | RNVC: 2

29 Mar 2004

5975-01-518-7382
Electrical Equipment Cabinet

015187382
NEMA-1/8DIN4X1: RNCC: 3 | RNVC: 2

22 Mar 2004

5975-01-661-4430
Electrical Equipment Cabinet

016614430
KAM/LRU/006/AM5: RNCC: 3 | RNVC: 2

2 Mar 2017

5975-01-662-7435
Guide Rail

016627435
147-1960: RNCC: 3 | RNVC: 2

18 Apr 2017

5975-01-551-8330
Electrical-Electronic Equipment Chassis

015518330
758R405G01: RNCC: 3 | RNVC: 2

29 May 2007

5975-01-552-8205
Enclosure Control Unit

015528205
N-32095-001: RNCC: 3 | RNVC: 9

26 Jun 2007

5975-01-662-7932
Electrical Equipment Mounting Base

016627932
NBRK0250: RNCC: 3 | RNVC: 2

20 Apr 2017

5975-01-618-5761
Electrical-Electronic Equipment Chassis

016185761
DCS-032KVM: RNCC: 3 | RNVC: 2

29 Apr 2013

5975-01-621-8389
Junction Box

016218389
MAS0808030R5: RNCC: 3 | RNVC: 9

18 Sep 2013

5975-01-616-2938
Electrical Equipment Rack

016162938
N2916B: RNCC: 3 | RNVC: 2

8 Feb 2013

5975-01-617-3137
Electrical Equipment Cabinet

016173137
575245: RNCC: 3 | RNVC: 2

19 Mar 2013

5975-01-620-5829
Grounding Coil

016205829
0019216-02: RNCC: 3 | RNVC: 2

31 Jul 2013

5975-01-621-4568
Electrical-Electronic Equipment Chassis

016214568
1182832: RNCC: 3 | RNVC: 2

9 Sep 2013

5975-01-163-2129
Stand-Off Bushing

011632129
130-23-AL-6-32P: RNCC: 3 | RNVC: 2

29 Sep 1983

5975-01-516-6698
Electrical-Electronic Equipment Panel

015166698
233T3242-6: RNCC: 3 | RNVC: 2

14 Jan 2004

5975-01-516-7704
Cable Reinforcing Link

015167704
116436-G5: RNCC: 3 | RNVC: 2

20 Jan 2004

5975-01-517-8027
Flexible Metal Conduit

015178027
M24758/6-08-A: RNCC: 2 | RNVC: 2
MIL-C-24758/6: RNCC: 4 | RNVC: 1

19 Feb 2004

5975-01-517-9485
Rack Based Console

015179485
7422100-00: RNCC: 3 | RNVC: 2
7383325-01: RNCC: 5 | RNVC: 2

25 Feb 2004

5975-01-517-9118
Electrical Components Tie Down Strap

015179118
69235K53: RNCC: 3 | RNVC: 2

24 Feb 2004

5975-01-349-3064
Electrical Conductor Bushing

013493064
L2080385-5: RNCC: 3 | RNVC: 2

23 Nov 1991

5975-01-354-1599
Electrical Conduit Adapter

013541599
C004AC1212AA/18: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-01-661-4220
Interior Cable Rack

016614220
AR8173BLK: RNCC: 3 | RNVC: 2

2 Mar 2017

5975-01-582-7150
Electrical Components Tie Down Strap

015827150
PLC4S-S10-M30: RNCC: 3 | RNVC: 2
PLC4S-S10-M30: RNCC: 5 | RNVC: 2

3 Mar 2010

5975-01-583-7380
Junction Box Assembly

015837380
92550-02814-106: RNCC: 3 | RNVC: 2

5 Apr 2010

5975-01-584-9219
Electrical-Electronic Equipment Chassis

015849219
8166198-1: RNCC: 3 | RNVC: 2

11 May 2010

5975-01-584-8381
Electrical Chassis

015848381
268863G1: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-613-1912
Electrical Equipment Leg

016131912
M62-88103: RNCC: 3 | RNVC: 2

1 Nov 2012

5975-01-504-1520
24 Inch Wide Base

015041520
156850GP1: RNCC: 3 | RNVC: 1

21 Jan 2003

5975-01-412-1634
Electrical Equipment Rack

014121634
3838026-4: RNCC: 3 | RNVC: 2

12 Apr 1995

5975-01-412-4237
Electrical Equipment Rack

014124237
1018: RNCC: 3 | RNVC: 2

18 Apr 1995

5975-01-657-7898
Electrical Equipment Mounting Base

016577898
65C26702-1: RNCC: 3 | RNVC: 2

30 Aug 2016

5975-01-658-0256
Electrical-Electronic Equipment Chassis

016580256
NI PXI-1033: RNCC: 3 | RNVC: 2

9 Sep 2016

5975-01-657-8445
Mounting Plate

016578445
39278-40121-4: RNCC: 3 | RNVC: 2

31 Aug 2016

5975-01-581-5826
Junction Box

015815826
915623-4: RNCC: 3 | RNVC: 2

22 Jan 2010

5975-01-607-2026
Chassis Blade

016072026
09205040-01: RNCC: 3 | RNVC: 1

5 Jun 2012

5975-01-234-5707
Wire Wrap Strip

012345707
906205: RNCC: 3 | RNVC: 2

16 Jun 1986

5975-01-233-4042
Electrical Cable Assembly Protector

012334042
4205559: RNCC: 3 | RNVC: 2
4205559: RNCC: 8 | RNVC: 2

30 May 1986

5975-01-501-3284
Electronic Equipment Mounting Tray

015013284
09-2757055-162: RNCC: 3 | RNVC: 2

30 Sep 2002

5975-01-503-2241
Electrical-Electronic Equipment Chassis

015032241
8520126-902: RNCC: 3 | RNVC: 2

9 Dec 2002

5975-01-503-1200
Blank Panel

015031200
600B45922: RNCC: 3 | RNVC: 2

4 Dec 2002

5975-01-502-7084
Electrical Components Tie Down Strap

015027084
757-5696-001: RNCC: 3 | RNVC: 2

18 Nov 2002

5975-01-503-5067
Interconnecting Box

015035067
123013: RNCC: 3 | RNVC: 2

19 Dec 2002

5975-01-656-4165
Electrical Equipment Mounting Base

016564165
LE49328-1: RNCC: 3 | RNVC: 2

30 Jun 2016

5975-01-656-9090
Cable Hanger

016569090
CC9-2-CD: RNCC: 3 | RNVC: 2

22 Jul 2016

5975-01-657-2394
Electrical Equipment Rack

016572394
H6J82A: RNCC: 3 | RNVC: 2

4 Aug 2016

5975-01-657-2138
Electrical Conduit Adapter

016572138
185792-1: RNCC: 3 | RNVC: 2
5010306346: RNCC: 5 | RNVC: 2
20518107: RNCC: 5 | RNVC: 2
20518107: RNCC: 5 | RNVC: 9

3 Aug 2016

5975-01-579-5470
Cable Terminal Chamber

015795470
PE-10CHE1-RJ48-QPP: RNCC: 3 | RNVC: 2

17 Nov 2009

5975-01-580-1870
Electrical Equipment Rack

015801870
RX1321-101: RNCC: 3 | RNVC: 2

7 Dec 2009

5975-01-580-8252
Electrical Tie Down Mounting Base

015808252
TC5357: RNCC: 3 | RNVC: 2

29 Dec 2009

5975-01-600-8442
Electrical-Electronic Equipment Chassis

016008442
CPSMC0100-226: RNCC: 3 | RNVC: 9

21 Dec 2011

5975-01-600-0154
Electrical Box Adapter Flange

016000154
8939432-0001: RNCC: 3 | RNVC: 2

2 Nov 2011

5975-01-601-4405
Conduit Chase Nipple

016014405
CI8006: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-4477
Electrical Equipment Cabinet

016014477
098816-0001: RNCC: 3 | RNVC: 2
CY-5312/GRN-519: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-01-500-9146
Electrical Fitting Mounting Base

015009146
654-0075-002: RNCC: 3 | RNVC: 2

16 Sep 2002

5975-01-501-5238
Electrical Equipment Mounting Base

015015238
993E-11: RNCC: 3 | RNVC: 2
822-1223-001: RNCC: 5 | RNVC: 2

3 Oct 2002

5975-00-328-7922
Electrical Box Connector

003287922
7285V: RNCC: 3 | RNVC: 2
WF406: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-188-6514
Electrical Equipment Mounting Base

001886514
464074-192: RNCC: 3 | RNVC: 2

16 Mar 1973

5975-01-407-2057
Electrical-Electronic Equipment Chassis

014072057
DE1001-RA: RNCC: 3 | RNVC: 9

23 Jan 1995

5975-01-652-9137
Electrical Equipment Drawer

016529137
11601-217K: RNCC: 3 | RNVC: 2

8 Mar 2016

5975-01-654-2569
Electrical Equipment Mounting Base

016542569
KC44024-003: RNCC: 3 | RNVC: 2
KC44024: RNCC: D | RNVC: 9

22 Apr 2016

5975-01-653-9764
Raceway Cover

016539764
LD5IW10-A: RNCC: 3 | RNVC: 2

13 Apr 2016

5975-01-654-1230
Mounting Plate

016541230
8547183-01: RNCC: 3 | RNVC: 2

18 Apr 2016

5975-01-576-0031
Electrical Equipment Mounting Base

015760031
RMT40-00-01: RNCC: 3 | RNVC: 9
RMT40-00-01: RNCC: 5 | RNVC: 9
RMT-40-01: RNCC: C | RNVC: 1

21 Jul 2009

5975-01-578-5417
Electronic Equipment Mounting Tray

015785417
MT4-4391-101: RNCC: 3 | RNVC: 2
MT4-4391-101: RNCC: 5 | RNVC: 2

9 Oct 2009

5975-01-578-5422
Electronic Equipment Mounting Tray

015785422
MT4-4390-101: RNCC: 3 | RNVC: 2
MT4-4390-101: RNCC: 5 | RNVC: 2

9 Oct 2009

5975-01-594-4340
Electronic Equipment Mounting Tray

015944340
286A708-1: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-498-7214
Rigid Metal Conduit Assembly

014987214
5HB71102-385: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7173
Rigid Metal Conduit Assembly

014987173
5HB71102-253: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7289
Rigid Metal Conduit Assembly

014987289
5HB71102-279: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7282
Rigid Metal Conduit Assembly

014987282
5HB71102-259: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7175
Rigid Metal Conduit Assembly

014987175
5HB71102-261: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-00-309-4512
Vibration Loc Pivot

003094512
21958: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-652-1152
Conduit Outlet

016521152
JBX3510IW-A: RNCC: 3 | RNVC: 2

10 Feb 2016

5975-01-651-8773
Electrical Equipment Mounting Base

016518773
7510280-901: RNCC: 3 | RNVC: 2

2 Feb 2016

5975-01-652-2524
Electrical Equipment Cabinet

016522524
DN82000: RNCC: 3 | RNVC: 2

16 Feb 2016

5975-01-652-2277
Electrical Equipment Mounting Base

016522277
2879985: RNCC: 3 | RNVC: 2

12 Feb 2016

5975-01-575-5256
Electrical-Electronic Equipment Chassis

015755256
988-6888-001: RNCC: 3 | RNVC: 2

6 Jul 2009

5975-01-590-6509
Electrical Equipment Drawer

015906509
40008887+004: RNCC: 3 | RNVC: 2

14 Dec 2010

5975-01-588-9120
Electric Cable Joint Box Supplementary Equipment

015889120
905252-007: RNCC: 3 | RNVC: 2

8 Oct 2010

5975-01-588-7206
Electrical-Electronic Equipment Panel

015887206
6340K85050-1: RNCC: 3 | RNVC: 2

30 Sep 2010

5975-00-669-7255
Flexible Metal Conduit Assembly

006697255
5334403-578: RNCC: 3 | RNVC: 2
5334403-578: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-497-2110
Electrical Components Tie Down Strap

014972110
PLF1MA-C4: RNCC: 3 | RNVC: 2

13 May 2002

5975-01-650-5775
Electrical Equipment Rack Base

016505775
0130-7104-01: RNCC: 3 | RNVC: 2

10 Dec 2015

5975-01-650-4621
Junction Box

016504621
4802268: RNCC: 3 | RNVC: 2

4 Dec 2015

5975-01-573-8589
Electrical Equipment Rack

015738589
RX2004-1: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8587
Electrical Equipment Rack

015738587
RX2004-100: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-584-3733
Electrical-Electronic Equipment Panel

015843733
3605000-0537: RNCC: 3 | RNVC: 2

23 Apr 2010

5975-01-584-8247
Electrical Chassis

015848247
2202-4: RNCC: 3 | RNVC: 2

7 May 2010

5975-00-510-6815
Electrical Box Connector

005106815
312: RNCC: 3 | RNVC: 2
59066D41-69: RNCC: 5 | RNVC: 2
59066D41-69: RNCC: 5 | RNVC: 2
59066D41-69C: RNCC: 5 | RNVC: 2
JH30-39: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-496-1529
Guide Rail

014961529
MDMT14: RNCC: 3 | RNVC: 2
5D0519-6: RNCC: 5 | RNVC: 2

4 Apr 2002

5975-01-496-0904
Electrical-Electronic Equipment Chassis

014960904
761-0584-001: RNCC: 3 | RNVC: 2

2 Apr 2002

5975-01-420-5273
Interconnecting Box

014205273
F20G8011017-506: RNCC: 3 | RNVC: 2

19 Oct 1995

5975-01-420-7449
Blank Panel

014207449
EC-12122-1: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-421-0977
Blank Panel

014210977
7596296G1: RNCC: 3 | RNVC: 2

1 Nov 1995

5975-00-505-2101
Interconnecting Box

005052101
J90AIC3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-648-7742
Junction Box

016487742
284A3223-2: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-648-7451
Electrical Equipment Shelf

016487451
284A3740-101: RNCC: 3 | RNVC: 2

5 Oct 2015

5975-01-649-3448
Mounting Plate

016493448
CB04548-001: RNCC: 3 | RNVC: 2
CB04548: RNCC: D | RNVC: 9

27 Oct 2015

5975-01-649-5710
Junction Box Assembly

016495710
284A2224-3: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-649-3479
Electrical Equipment Rack

016493479
CA35808-001: RNCC: 3 | RNVC: 2
CA35808: RNCC: D | RNVC: 9

27 Oct 2015

5975-01-572-9888
Electrical Equipment Rack

015729888
424057-01: RNCC: 3 | RNVC: 2

2 Apr 2009

5975-01-582-7171
Electrical-Electronic Equipment Panel

015827171
4025767-901: RNCC: 3 | RNVC: 2

3 Mar 2010

5975-01-580-9997
Electrical-Electronic Equipment Chassis

015809997
ZCM596: RNCC: 3 | RNVC: 2
ZCM596: RNCC: 3 | RNVC: 9

4 Jan 2010

5975-01-581-3108
Electrical Components Tie Down Strap

015813108
KA4A1-2 CB9120: RNCC: 3 | RNVC: 2
KA4A1-2CB9120V5: RNCC: 5 | RNVC: 2
KA4A1-2 CB91Z0V5: RNCC: 5 | RNVC: 2
69.62620-0001: RNCC: 5 | RNVC: 2
CB9120: RNCC: 5 | RNVC: 2
KA4A1-2 CB9120: RNCC: 5 | RNVC: 9
CB9120: RNCC: D | RNVC: 9
KA KIT: RNCC: D | RNVC: 9

12 Jan 2010

5975-00-811-0946
Electrical Cable Nipple

008110946
5297241: RNCC: 3 | RNVC: 2
5297241: RNCC: 5 | RNVC: 2
7982400: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-501-2532
Conduit Outlet Cover

005012532
1773: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-495-3181
Interconnecting Box

014953181
4249856: RNCC: 3 | RNVC: 2

12 Mar 2002

5975-01-495-1476
Electrical-Electronic Equipment Chassis

014951476
461419-1: RNCC: 3 | RNVC: 2

7 Mar 2002

5975-01-419-2170
Electric Cable Joint Box Supplementary Equipment

014192170
13135: RNCC: 3 | RNVC: 2

15 Sep 1995

5975-01-647-4939
Blank Panel

016474939
304A025-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-647-9840
Electrical Conduit Union

016479840
AGS3016C: RNCC: 3 | RNVC: 2
AGS3016C: RNCC: 3 | RNVC: 9

10 Sep 2015

5975-01-648-6658
Union Selector Assy

016486658
800-8549-9: RNCC: 3 | RNVC: 2
800-8549-9: RNCC: 3 | RNVC: 9

1 Oct 2015

5975-01-647-4938
Blank Panel

016474938
304A051-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-647-8421
Electrical Components Tie Down Strap

016478421
FO200-40-0: RNCC: 3 | RNVC: 2
2548.6681: RNCC: 5 | RNVC: 2

3 Sep 2015

5975-01-523-4248
Electrical-Electronic Equipment Chassis

015234248
10178-1004: RNCC: 3 | RNVC: 2

1 Sep 2004

5975-01-525-1419
Stuffing Tube

015251419
12145-403: RNCC: 3 | RNVC: 2

28 Oct 2004

5975-01-577-8693
Electrical-Electronic Equipment Chassis

015778693
412152-B22: RNCC: 3 | RNVC: 2
HP BLC7000-CTO: RNCC: 5 | RNVC: 2

21 Sep 2009

5975-01-578-8282
Electrical-Electronic Equipment Chassis

015788282
3CS7903E: RNCC: 3 | RNVC: 2

21 Oct 2009

5975-01-575-6364
Electrical Equipment Leg

015756364
9021095-01: RNCC: 3 | RNVC: 2

10 Jul 2009

5975-01-135-0694
Cable Marker Sleeve

011350694
0186864P9: RNCC: 3 | RNVC: 2

17 Jul 1982

5975-00-486-6004
Rigid Metal Conduit Assembly

004866004
707545: RNCC: 3 | RNVC: 2
707545: RNCC: 5 | RNVC: 9
55064: RNCC: 5 | RNVC: 9

4 Jun 1969

5975-01-627-9015
Nonmetallic Raceway Assembly

016279015
TF10IW-X: RNCC: 3 | RNVC: 2

1 May 2014

5975-01-627-3694
Raceway Cover

016273694
OCF10IW-X: RNCC: 3 | RNVC: 2

11 Apr 2014

5975-01-628-1131
Electrical Cable Support

016281131
HLF1290B: RNCC: 3 | RNVC: 2

9 May 2014

5975-01-628-1527
Rail Kit

016281527
OM756D: RNCC: 3 | RNVC: 2

12 May 2014

5975-01-627-8495
Nonmetallic Raceway

016278495
T45BIW10: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-627-4073
Interior Cable Rack

016274073
000 031: RNCC: 3 | RNVC: 2
CF30/150EZ: RNCC: 5 | RNVC: 2

14 Apr 2014

5975-01-627-1631
Electrical-Electronic Equipment Chassis

016271631
CHASSIS-DOWSLAKE MOD.RA-T: RNCC: 3 | RNVC: 2

3 Apr 2014

5975-01-522-5031
Insulator Bracket

015225031
004641: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-522-4629
Electrical Components Tie Down Strap

015224629
MLT12H-Q: RNCC: 3 | RNVC: 2

30 Jul 2004

5975-01-522-2870
Electrical-Electronic Equipment Panel

015222870
406-075-241-107: RNCC: 3 | RNVC: 2

26 Jul 2004

5975-01-523-6016
Electrical Tie Down Mounting Base

015236016
CB3019AA2N750P: RNCC: 3 | RNVC: 2

9 Sep 2004

5975-01-523-7756
Electrical-Electronic Equipment Chassis

015237756
243564-B21: RNCC: 3 | RNVC: 2

15 Sep 2004

5975-01-696-9237
Electrical Equipment Mounting Base

016969237
3367187-1: RNCC: 3 | RNVC: 2

24 Aug 2021

5975-01-695-0228
Electrical Equipment Rack

016950228
P9K08A: RNCC: 3 | RNVC: 2

10 May 2021

5975-01-693-9485
Electrical-Electronic Equipment Panel

016939485
352E2307-101: RNCC: 3 | RNVC: 2

11 Mar 2021

5975-01-695-2423
Electrical Equipment Rack

016952423
19000743-100: RNCC: 3 | RNVC: 2

24 May 2021

5975-01-695-5819
Junction Box

016955819
412A230132-ROHS: RNCC: 3 | RNVC: 2
412A230132-ROHS: RNCC: 5 | RNVC: 2

14 Jun 2021

5975-01-696-5981
Rigid Nonmetallic Conduit

016965981
102364: RNCC: 3 | RNVC: 2

5 Aug 2021

5975-01-696-8573
Electric Component Rail Guide Stop

016968573
15703077-03: RNCC: 3 | RNVC: 2

20 Aug 2021

5975-01-696-4234
Electronic Equipment Mounting Tray

016964234
16E5453-3: RNCC: 3 | RNVC: 2
16E5453-3: RNCC: 5 | RNVC: 2

27 Jul 2021

5975-01-696-8874
Electrical Equipment Mounting Base

016968874
3367187-5: RNCC: 3 | RNVC: 2

23 Aug 2021

5975-01-024-6125
Electrical Box Connector

010246125
STB50: RNCC: 3 | RNVC: 2
SM-A-949385-1: RNCC: 5 | RNVC: 2
STB-50: RNCC: C | RNVC: 1

15 Jul 1976

5975-00-490-4392
Electrical Equipment Mounting Base

004904392
ES0000062: RNCC: 3 | RNVC: 9

22 Sep 1969

5975-01-538-6415
Electrical Equipment Rack

015386415
AF072A: RNCC: 3 | RNVC: 2

28 Mar 2006

5975-01-539-7906
Electrical-Electronic Equipment Chassis

015397906
14024106: RNCC: 3 | RNVC: 2
241 1EG5214024106: RNCC: C | RNVC: 1

2 May 2006

5975-01-626-4668
Electrical Equipment Cabinet

016264668
734-63742-1: RNCC: 3 | RNVC: 2
734-63742: RNCC: D | RNVC: 9

11 Mar 2014

5975-01-626-4613
Electrical-Electronic Equipment Panel

016264613
734-65221-1: RNCC: 3 | RNVC: 2
734-65221: RNCC: D | RNVC: 9

11 Mar 2014

5975-01-627-0850
Electrical-Electronic Equipment Chassis

016270850
B8S55AA: RNCC: 3 | RNVC: 2

1 Apr 2014

5975-01-520-7591
Junction Box

015207591
47761-5019: RNCC: 3 | RNVC: 2

25 May 2004

5975-01-691-5733
Electrical-Electronic Equipment Panel

016915733
77A583440G1: RNCC: 3 | RNVC: 2

16 Oct 2020

5975-01-691-5954
Electrical Equipment Rack

016915954
TPC2365-R: RNCC: 3 | RNVC: 2

19 Oct 2020

5975-01-692-7348
Electrical Components Tie Down Strap

016927348
BT2I-M30: RNCC: 3 | RNVC: 2

8 Jan 2021

5975-01-692-8126
Electrical Components Tie Down Strap

016928126
170790: RNCC: 3 | RNVC: 2
CS PL VO 120 104: RNCC: 5 | RNVC: 2

13 Jan 2021

5975-01-691-5622
Electrical Tie Down Mounting Base

016915622
007-002313-000: RNCC: 3 | RNVC: 2

16 Oct 2020

5975-01-692-8345
Electronic Junction Rack

016928345
1100796-501: RNCC: 3 | RNVC: 2

13 Jan 2021

5975-01-693-7975
Cable Strain Relief Bushing

016937975
SRB19BLY: RNCC: 3 | RNVC: 2
SRB19BLY: RNCC: 5 | RNVC: 9

5 Mar 2021

5975-01-694-4135
Interior Cable Rack

016944135
CF 54/450 EZ: RNCC: 3 | RNVC: 2

1 Apr 2021

5975-01-694-7823
Electrical-Electronic Equipment Chassis

016947823
MB2530/M: RNCC: 3 | RNVC: 2

23 Apr 2021

5975-00-495-4685
Electrical-Electronic Equipment Chassis

004954685
0N149656: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-01-536-7413
Electrical Equipment Rack

015367413
608J445G01: RNCC: 3 | RNVC: 2
608J445G01: RNCC: 3 | RNVC: 9

12 Jan 2006

5975-01-536-7569
Electrical Equipment Cabinet

015367569
180704-001: RNCC: 3 | RNVC: 2

12 Jan 2006

5975-01-537-5576
Electrical-Electronic Equipment Chassis

015375576
WS-C6503-E-FAN: RNCC: 3 | RNVC: 2

13 Feb 2006

5975-01-538-0395
Electrical-Electronic Equipment Panel

015380395
030586-0002: RNCC: 3 | RNVC: 2

8 Mar 2006

5975-01-537-9137
Electrical Equipment Cabinet

015379137
083948-0006: RNCC: 3 | RNVC: 9

2 Mar 2006

5975-00-312-7970
Electrical Equipment Leg

003127970
SM-B-91320: RNCC: 3 | RNVC: 2
SMB91320: RNCC: 5 | RNVC: 2
SM-B-91320: RNCC: 5 | RNVC: 2
SMB91320-1: RNCC: 5 | RNVC: 9
B472743-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-413-8191
Flexible Nonmetallic Conduit

014138191
774164: RNCC: 3 | RNVC: 2

23 May 1995

5975-01-625-1281
Electrical-Electronic Equipment Chassis

016251281
N121800-1: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-5762
Electrical Equipment Shelf

016255762
233A5623-3: RNCC: 3 | RNVC: 2

7 Feb 2014

5975-01-625-0805
Electrical Tie Down Mounting Base

016250805
HBF 08461: RNCC: 3 | RNVC: 2

23 Jan 2014

5975-01-625-5743
Electrical Equipment Shelf

016255743
233A5623-4: RNCC: 3 | RNVC: 2

7 Feb 2014

5975-01-625-2212
Electrical-Electronic Equipment Panel

016252212
K10053235501: RNCC: 3 | RNVC: 2

28 Jan 2014

5975-01-625-1301
Electrical-Electronic Equipment Panel

016251301
N121363-1: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-0088
Electrical-Electronic Equipment Chassis

016250088
987-594-00: RNCC: 3 | RNVC: 2

22 Jan 2014

5975-01-519-4822
Electrical Equipment Rack

015194822
9019-040: RNCC: 3 | RNVC: 2

21 Apr 2004

5975-01-519-4519
Electrical Nonmetallic Conduit Assembly

015194519
23A01864-02: RNCC: 3 | RNVC: 2

20 Apr 2004

5975-01-690-6743
Electrical Wall Plate

016906743
64729-3: RNCC: 3 | RNVC: 2

26 Aug 2020

5975-01-624-5426
Electrical-Electronic Equipment Chassis

016245426
NC316BU-4S/AC: RNCC: 3 | RNVC: 2

7 Jan 2014

5975-01-624-1524
Electrical-Electronic Equipment Panel

016241524
K10052749-1: RNCC: 3 | RNVC: 2

17 Dec 2013

5975-01-518-2176
Junction Box

015182176
6135852-9: RNCC: 3 | RNVC: 2

4 Mar 2004

5975-01-518-3071
Switch Terminal Cover

015183071
95-728-D-PART 11: RNCC: 3 | RNVC: 2

8 Mar 2004

5975-01-689-7472
Electrical Equipment Rack

016897472
115-01294-A0: RNCC: 3 | RNVC: 2

8 Jul 2020

5975-01-684-5003
Electrical-Electronic Equipment Chassis

016845003
RK-FLEX-24: RNCC: 3 | RNVC: 9
VF 01234: RNCC: 5 | RNVC: 2

5 Nov 2019

5975-01-685-7195
Electronic Equipment Mounting Tray

016857195
K10055626-501: RNCC: 3 | RNVC: 2

9 Jan 2020

5975-01-685-7913
Electrical-Electronic Equipment Chassis

016857913
RFE23050240-501: RNCC: 3 | RNVC: 2
RFE23050240-501: RNCC: 3 | RNVC: 9

13 Jan 2020

5975-01-687-6991
Electronic Equipment Mounting Tray

016876991
UPA85478-1: RNCC: 3 | RNVC: 2

14 Apr 2020

5975-01-689-0768
Electrical Equipment Rack

016890768
SFR-127A-LPB: RNCC: 3 | RNVC: 2

4 Jun 2020

5975-00-534-3584
Cable Marker Sleeve

005343584
5343584: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-498-8052
Underground Cable Rack Hook

004988052
1132: RNCC: 3 | RNVC: 2
1132: RNCC: 5 | RNVC: 9
DU5S2: RNCC: 5 | RNVC: 9
2132: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-534-9410
Electrical Equipment Mounting Base

015349410
068650-0001: RNCC: 3 | RNVC: 2

8 Nov 2005

5975-01-534-2460
Electrical-Electronic Equipment Chassis

015342460
335880-B21: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-01-534-5156
Electronic Junction Rack

015345156
11472327-002: RNCC: 3 | RNVC: 2

25 Oct 2005

5975-01-534-5500
Tester Hood

015345500
LA-RG967-102: RNCC: 3 | RNVC: 2

25 Oct 2005

5975-01-534-7581
Electrical-Electronic Equipment Chassis

015347581
BA36R-RC: RNCC: 3 | RNVC: 9
00-BA356-RC: RNCC: 5 | RNVC: 2

1 Nov 2005

5975-01-536-0150
Junction Box

015360150
BPG6: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-01-443-3045
Electrical-Electronic Equipment Chassis

014433045
142185-001: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-2392
Blank Panel

014432392
111-D6033-1: RNCC: 3 | RNVC: 2

4 Apr 1997

5975-00-477-3895
Cable Spacer

004773895
210237-1: RNCC: 3 | RNVC: 2

20 Jan 1999

5975-01-515-9177
Electrical-Electronic Equipment Chassis

015159177
164063-01: RNCC: 3 | RNVC: 2
164063-01: RNCC: 3 | RNVC: 9

12 Dec 2003

5975-01-517-6252
Ground Rod Section

015176252
25358GOVT: RNCC: 3 | RNVC: 2
3481868: RNCC: 7 | RNVC: 2
3481868: RNCC: 7 | RNVC: 9

17 Feb 2004

5975-01-518-0585
Electrical Wall Plate

015180585
81-1770-1: RNCC: 3 | RNVC: 2

1 Mar 2004

5975-01-518-7066
Electrical-Electronic Equipment Panel

015187066
G6992-12: RNCC: 3 | RNVC: 2

19 Mar 2004

5975-01-518-9283
Blank Panel

015189283
1003064-004: RNCC: 3 | RNVC: 2

29 Mar 2004

5975-01-656-5639
Stuffing Tube

016565639
55210: RNCC: 3 | RNVC: 2

8 Jul 2016

5975-01-656-7873
Electrical Equipment Foot

016567873
886124: RNCC: 3 | RNVC: 2

19 Jul 2016

5975-01-657-2644
Interior Cable Rack

016572644
558 241: RNCC: 3 | RNVC: 2
EDRNEZ: RNCC: 5 | RNVC: 2

5 Aug 2016

5975-01-658-2504
Flexible Metal Conduit

016582504
M24758-K: RNCC: 3 | RNVC: 2

20 Sep 2016

5975-01-657-3454
Electrical Equipment Mounting Base

016573454
8050504: RNCC: 3 | RNVC: 2

9 Aug 2016

5975-01-012-5457
Electrical-Electronic Equipment Chassis

010125457
761-0673-001: RNCC: 3 | RNVC: 2

14 Nov 1975

5975-01-052-3056
Panel

010523056
136230-0002: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-00-816-1980
Electrical Cable Nipple

008161980
8140000038: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-530-8572
Electrical Equipment Rack Base

015308572
20-16547-01: RNCC: 3 | RNVC: 2

14 Jun 2005

5975-01-531-2354
Electrical Equipment Mounting Base

015312354
308-1301-031: RNCC: 3 | RNVC: 9

29 Jun 2005

5975-01-532-2675
Electrical-Electronic Equipment Chassis

015322675
3085553-1: RNCC: 3 | RNVC: 2

3 Aug 2005

5975-01-534-0529
Ground Clamp

015340529
766678: RNCC: 3 | RNVC: 2

5 Oct 2005

5975-01-439-3687
Electrical Equipment Cabinet

014393687
165620-002: RNCC: 3 | RNVC: 2

5 Dec 1996

5975-01-439-6762
Electrical-Electronic Equipment Chassis

014396762
872510: RNCC: 3 | RNVC: 2

16 Dec 1996

5975-01-440-6371
Electrical-Electronic Equipment Panel

014406371
5497086-29: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-01-440-6501
Electrical-Electronic Equipment Chassis

014406501
296745: RNCC: 3 | RNVC: 9

21 Jan 1997

5975-01-440-6383
Electrical Equipment Rack

014406383
5498161-2: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-00-489-3839
Electrical Tie Down Mounting Base

004893839
TC342A: RNCC: 3 | RNVC: 2
ABMS-A-C: RNCC: 5 | RNVC: 2
TC342A: RNCC: 5 | RNVC: 2
0205519T00: RNCC: 5 | RNVC: 2
TC342A: RNCC: 5 | RNVC: 9

11 Mar 1972

5975-01-620-3888
Electrical-Electronic Equipment Chassis

016203888
ASR-9006-AC-V2: RNCC: 3 | RNVC: 2

22 Jul 2013

5975-01-621-3014
Electronic Equipment Mounting Tray

016213014
23-62200-105: RNCC: 3 | RNVC: 2

30 Aug 2013

5975-01-620-7950
Electrical Components Tie Down Strap

016207950
SST4H-D0: RNCC: 3 | RNVC: 2
98150511: RNCC: 5 | RNVC: 2

12 Aug 2013

5975-01-620-7946
Electrical Components Tie Down Strap

016207946
PLT4H-TL100: RNCC: 3 | RNVC: 2
500436402: RNCC: 5 | RNVC: 2
PLT4H-TL100: RNCC: 5 | RNVC: 2

12 Aug 2013

5975-01-621-7037
Electrical Equipment Cabinet

016217037
BW963A: RNCC: 3 | RNVC: 2

16 Sep 2013

5975-01-621-6001
Electrical-Electronic Equipment Panel

016216001
16107320: RNCC: 3 | RNVC: 2

12 Sep 2013

5975-01-621-2164
Electrical-Electronic Equipment Panel

016212164
68D411200-1001: RNCC: 3 | RNVC: 2

28 Aug 2013

5975-01-516-0205
Flexible Nonmetallic Conduit

015160205
749-656-4-2: RNCC: 3 | RNVC: 2
5D0557-2: RNCC: 5 | RNVC: 2

16 Dec 2003

5975-01-654-0600
Junction Box

016540600
5133710: RNCC: 3 | RNVC: 2

15 Apr 2016

5975-01-654-1494
Conduit Outlet Cover

016541494
FCFPAW: RNCC: 3 | RNVC: 2

19 Apr 2016

5975-01-655-2268
Electrical-Electronic Equipment Panel

016552268
25-8DC165-1: RNCC: 3 | RNVC: 2
25-8DC165-1: RNCC: 3 | RNVC: 9

23 May 2016

5975-01-655-6273
Electrical-Electronic Equipment Chassis

016556273
84-01032-500: RNCC: 3 | RNVC: 2

3 Jun 2016

5975-01-041-1477
Electrical Components Tie Down Strap

010411477
SST4S30: RNCC: 3 | RNVC: 2
SST4S30: RNCC: 5 | RNVC: 2

20 May 1977

5975-01-041-1476
Electrical Components Tie Down Strap

010411476
SST2S30: RNCC: 3 | RNVC: 2

20 May 1977

5975-01-529-0611
Cable Spacer

015290611
CR2: RNCC: 3 | RNVC: 2
9D0224-2: RNCC: 5 | RNVC: 2

1 Apr 2005

5975-01-530-1814
Electrical-Electronic Equipment Chassis

015301814
LE7412A: RNCC: 3 | RNVC: 9

17 May 2005

5975-01-438-6475
Junction Box Assembly

014386475
3329399-1: RNCC: 3 | RNVC: 2

14 Nov 1996

5975-01-617-7986
Electrical-Electronic Equipment Chassis

016177986
SRME-351X51: RNCC: 3 | RNVC: 9

3 Apr 2013

5975-01-496-9314
Electrical Equipment Cabinet

014969314
797-0879-002: RNCC: 3 | RNVC: 2

1 May 2002

5975-01-512-3926
Junction Box Cover

015123926
46-0937-1: RNCC: 3 | RNVC: 2

28 Aug 2003

5975-01-653-9798
Electrical-Electronic Equipment Chassis

016539798
724E3707-201: RNCC: 3 | RNVC: 2

13 Apr 2016

5975-01-653-4580
Enclosure Plate

016534580
A36P30G: RNCC: 3 | RNVC: 2

24 Mar 2016

5975-01-526-8963
Electrical Equipment Cabinet

015268963
7516: RNCC: 3 | RNVC: 2

12 Jan 2005

5975-01-616-5477
Electrical-Electronic Equipment Chassis

016165477
HALRSYS-1700AC-A22: RNCC: 3 | RNVC: 2

19 Feb 2013

5975-01-616-7908
Clutch Panel Assemb

016167908
040706-640: RNCC: 3 | RNVC: 2

27 Feb 2013

5975-01-618-0284
Electrical Components Tie Down Strap

016180284
MIL-001-895: RNCC: 3 | RNVC: 2

10 Apr 2013

5975-01-495-8418
Electrical-Electronic Equipment Chassis

014958418
546-6562-000: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-496-8965
Insulator Pin

014968965
209117-100: RNCC: 3 | RNVC: 9
209117-100: RNCC: 5 | RNVC: 2

30 Apr 2002

5975-01-496-3854
Electrical-Electronic Equipment Chassis

014963854
2085995-3: RNCC: 3 | RNVC: 2

12 Apr 2002

5975-01-650-5677
Mounting Plate

016505677
500-633028: RNCC: 3 | RNVC: 2

9 Dec 2015

5975-01-651-1774
Junction Box

016511774
85001491: RNCC: 3 | RNVC: 2

7 Jan 2016

5975-01-651-6226
Junction Box

016516226
M300300225G: RNCC: 3 | RNVC: 2

25 Jan 2016

5975-01-652-4859
Blank Panel

016524859
LP9471: RNCC: 3 | RNVC: 2

24 Feb 2016

5975-01-242-6077
Electrical-Electronic Equipment Chassis

012426077
OMC-16: RNCC: 3 | RNVC: 2

13 Oct 1986

5975-01-247-5150
Electrical Equipment Rack

012475150
3525075-130: RNCC: 3 | RNVC: 2

8 Jan 1987

5975-00-810-8189
Electrical Conduit Elbow

008108189
LBY15: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-552-6539
Metallic Raceway

015526539
6212: RNCC: 3 | RNVC: 2

20 Jun 2007

5975-01-552-7599
Electrical-Electronic Equipment Chassis

015527599
NC316BU-16/AC: RNCC: 3 | RNVC: 9

22 Jun 2007

5975-01-553-6853
Electronic Equipment Mounting Tray

015536853
200-99884-101: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-554-2400
Electrical-Electronic Equipment Panel

015542400
70550-83107-048: RNCC: 3 | RNVC: 2

2 Aug 2007

Load More Results