What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 166 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 166 of 176

5975-01-653-5430
Electrical Equipment Mounting Base

016535430
12050-3010: RNCC: 3 | RNVC: 2

28 Mar 2016

5975-01-291-3155
Printed Circu Panel

012913155
10008475-0302: RNCC: 3 | RNVC: 9

28 Dec 1988

5975-01-291-6086
Electrical-Electronic Equipment Panel

012916086
28260-3: RNCC: 3 | RNVC: 2
283550-1205: RNCC: 5 | RNVC: 2

31 Dec 1988

5975-01-175-5635
Box Connector

011755635
214622-1: RNCC: 3 | RNVC: 2

6 Aug 2003

5975-01-484-4317
Electrical-Electronic Equipment Panel

014844317
10133-1805: RNCC: 3 | RNVC: 2

27 Apr 2001

5975-01-483-9944
Cable Marker Sleeve

014839944
2540806-80: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-9921
Cable Marker Sleeve

014839921
2540806-49: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-484-7024
Electrical Conduit Adapter

014847024
10464: RNCC: 3 | RNVC: 2

4 May 2001

5975-01-485-3210
Metallic Raceway

014853210
106895004: RNCC: 3 | RNVC: 2

22 May 2001

5975-01-484-4985
Chassis Base

014844985
2541019-1: RNCC: 3 | RNVC: 2
2541019-1: RNCC: 5 | RNVC: 9

30 Apr 2001

5975-01-430-2285
Electrical-Electronic Equipment Panel

014302285
808-510-1: RNCC: 3 | RNVC: 2

25 Apr 1996

5975-01-074-5093
Strap Tie Down Electrical

010745093
SST4IC: RNCC: 3 | RNVC: 2

1 Apr 1979

5975-01-075-0997
Electrical Conduit Bend

010750997
WW-C-563: RNCC: 4 | RNVC: 1
WW-C-563 TY3: RNCC: 5 | RNVC: 1

13 Apr 1979

5975-01-185-6781
Conduit Outlet Cover

011856781
3723: RNCC: 3 | RNVC: 9

1 Aug 1984

5975-01-648-8367
Junction Box Extension

016488367
284A3203-33: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-649-5759
Junction Box Cover

016495759
284A6223-1: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-482-6337
Guide Rail

014826337
MDMT8: RNCC: 3 | RNVC: 2
5D0519-4: RNCC: 5 | RNVC: 2

28 Feb 2001

5975-01-482-5917
Aircraft Receiver

014825917
133-510014-5: RNCC: 3 | RNVC: 2
133-510014-5: RNCC: 3 | RNVC: 9

27 Feb 2001

5975-01-419-6400
Strain Electrical Conductor Clamp

014196400
46863: RNCC: 3 | RNVC: 2

27 Sep 1995

5975-01-072-9636
Electrical Components Tie Down Strap

010729636
10S300-2-137: RNCC: 3 | RNVC: 2

7 Mar 1979

5975-01-647-4929
Blank Panel

016474929
304A036-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-336-7693
Electrical Equipment Rack

013367693
3525075-135: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-287-1793
Electrical Equipment Cabinet

012871793
H969-AA: RNCC: 3 | RNVC: 2

18 Oct 1988

5975-01-110-0813
Conduit Assy

011100813
1310-0001-3: RNCC: 3 | RNVC: 2
1310-0001-3: RNCC: 3 | RNVC: 9

26 Mar 1981

5975-01-142-5832
Electrical-Electronic Equipment Chassis

011425832
338779-1: RNCC: 3 | RNVC: 2

18 Nov 1982

5975-01-480-5627
Flexible Metal Conduit Assembly

014805627
227637-DL0000: RNCC: 3 | RNVC: 2

27 Nov 2000

5975-01-481-1085
Electrical Cable Nipple

014811085
JW-00083-005: RNCC: 3 | RNVC: 2

18 Dec 2000

5975-01-418-1633
Guide Rail

014181633
RC11090-16U: RNCC: 3 | RNVC: 2
9D0090-16U: RNCC: 5 | RNVC: 2

21 Aug 1995

5975-01-066-8845
Electrical Conduit

010668845
CRN2646-25: RNCC: 3 | RNVC: 2

20 Oct 1978

5975-01-335-6551
Electrical Equipment Rack

013356551
85421489-2: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-285-4392
Electrical Equipment Mounting Base

012854392
818268-802: RNCC: 3 | RNVC: 2

14 Sep 1988

5975-01-285-8634
Electrical-Electronic Equipment Panel

012858634
7012918-903: RNCC: 3 | RNVC: 2

22 Sep 1988

5975-01-110-4986
Outlet Box Cover

011104986
109970: RNCC: 3 | RNVC: 9

2 Apr 1981

5975-01-104-8120
Conduit

011048120
346741-7: RNCC: 3 | RNVC: 2

12 Dec 1980

5975-01-120-5993
Electrical-Electronic Equipment Chassis

011205993
326154-3: RNCC: 3 | RNVC: 2
326154-3: RNCC: 5 | RNVC: 2

21 Oct 1981

5975-01-124-9928
Electrical-Electronic Equipment Chassis

011249928
621-0415-003: RNCC: 3 | RNVC: 2

19 Jan 1982

5975-01-476-6357
Flexible Metal Conduit Assembly

014766357
S6162-63806-3: RNCC: 3 | RNVC: 2

18 Jul 2000

5975-01-476-7703
Interconnecting Box

014767703
5261002: RNCC: 3 | RNVC: 2

21 Jul 2000

5975-01-476-9967
Blank Panel

014769967
372062-6: RNCC: 3 | RNVC: 2

27 Jul 2000

5975-01-478-5506
Interconnecting Box

014785506
KD84227-001: RNCC: 3 | RNVC: 2

18 Sep 2000

5975-01-478-7634
Electrical Equipment Rack

014787634
KD84019-007: RNCC: 3 | RNVC: 2

26 Sep 2000

5975-01-478-7323
Electrical Equipment Rack

014787323
KD84034-001: RNCC: 3 | RNVC: 2

25 Sep 2000

5975-01-418-1858
Guide Rail

014181858
9D0090-27U: RNCC: 3 | RNVC: 2
RC11090-27U: RNCC: 3 | RNVC: 2
9D0090-27U: RNCC: 5 | RNVC: 2

22 Aug 1995

5975-01-424-6359
Junction Box Cover

014246359
248726: RNCC: 3 | RNVC: 2

1 Feb 1996

5975-01-425-4057
Electrical Grounding Plate

014254057
3171663-2: RNCC: 3 | RNVC: 2

20 Feb 1996

5975-01-066-5394
Electrical-Electronic Equipment Chassis

010665394
7870-0200: RNCC: 3 | RNVC: 9

13 Oct 1978

5975-01-335-1815
Electrical-Electronic Equipment Panel

013351815
DS240BP: RNCC: 3 | RNVC: 2

6 Mar 1991

5975-01-335-6563
Electrical-Electronic Equipment Chassis

013356563
82504918: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-071-4402
Card Guide Plate

010714402
642AS3066: RNCC: 3 | RNVC: 2

8 Feb 1979

5975-01-283-3948
Fanning Strip

012833948
217335: RNCC: 3 | RNVC: 2

5 Aug 1988

5975-01-098-5928
Electrical Equipment Cabinet

010985928
403614: RNCC: 3 | RNVC: 9
403614: RNCC: 5 | RNVC: 9
403614: RNCC: C | RNVC: 1

5 Aug 1980

5975-01-100-9702
Blank Panel

011009702
40178: RNCC: 3 | RNVC: 9

17 Sep 1980

5975-01-474-4400
Electrical-Electronic Equipment Chassis

014744400
751-2552-002: RNCC: 3 | RNVC: 2

3 May 2000

5975-01-476-4771
Electrical Nonmetallic Conduit Assembly

014764771
70107882-29: RNCC: 3 | RNVC: 2
38597ASSY70107882-29: RNCC: 5 | RNVC: 2

13 Jul 2000

5975-01-476-4768
Electrical Nonmetallic Conduit Assembly

014764768
70107882-49: RNCC: 3 | RNVC: 2
38597ASSY70107882-49: RNCC: 5 | RNVC: 2

13 Jul 2000

5975-01-413-0124
Electrical-Electronic Equipment Chassis

014130124
A405A138-95: RNCC: 3 | RNVC: 2
A405A138-95: RNCC: 3 | RNVC: 2

3 May 1995

5975-01-413-1170
Electronic Equipment Mounting Tray

014131170
R686-406-2-00-0: RNCC: 3 | RNVC: 2

5 May 1995

5975-01-414-8777
Electrical Equipment Mounting Base

014148777
165879: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-01-414-8772
Electrical Equipment Mounting Base

014148772
168129: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-01-382-1657
Electrical-Electronic Equipment Chassis

013821657
117305: RNCC: 3 | RNVC: 2

29 Oct 1993

5975-01-383-6264
Mounting Tray

013836264
1900-0250-00: RNCC: 3 | RNVC: 2

26 Nov 1993

5975-01-384-4349
Electrical-Electronic Equipment Chassis

013844349
1505-1287-002: RNCC: 3 | RNVC: 2

15 Dec 1993

5975-01-384-4364
Electrical-Electronic Equipment Panel

013844364
9281881-1: RNCC: 3 | RNVC: 2
9281881-1: RNCC: 5 | RNVC: 2
9281881: RNCC: D | RNVC: 9

15 Dec 1993

5975-01-384-4826
Tab Lockout

013844826
ED600: RNCC: 3 | RNVC: 2

16 Dec 1993

5975-01-170-6766
Electrical-Electronic Equipment Chassis

011706766
5053061-1: RNCC: 3 | RNVC: 2

27 Jan 1984

5975-01-296-9103
Electrical Equipment Mounting Base

012969103
8033-5: RNCC: 3 | RNVC: 2

25 Mar 1989

5975-01-372-2379
Electrical Equipment Mounting Base

013722379
10738: RNCC: 3 | RNVC: 2
17B9E1000-549: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-373-9961
Cable Marker Sleeve

013739961
TRSA1014/E/0: RNCC: 3 | RNVC: 2
99045873: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-379-3026
Cable Terminal Chamber

013793026
XAGA550A3G/170: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-092-5437
Electrical Equipment Shelf

010925437
SM-D-2015998: RNCC: 3 | RNVC: 2

28 Mar 1980

5975-01-097-4700
Blank Panel

010974700
40177: RNCC: 3 | RNVC: 9

12 Jul 1980

5975-00-910-3461
Junction Box Cover

009103461
CE223274: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-471-5860
Flexible Metal Conduit Assembly

014715860
254786: RNCC: 3 | RNVC: 2

7 Feb 2000

5975-01-471-3396
Electrical Equipment Cabinet

014713396
7CDD: RNCC: 3 | RNVC: 2

31 Jan 2000

5975-01-471-6890
Junction Box Cover

014716890
53-0044: RNCC: 3 | RNVC: 2

10 Feb 2000

5975-01-470-8920
Isolator Mount

014708920
068539: RNCC: 3 | RNVC: 2

13 Jan 2000

5975-01-472-3450
Electrical-Electronic Equipment Panel

014723450
3353445-1: RNCC: 3 | RNVC: 2

29 Feb 2000

5975-01-410-9818
Cable Spacer

014109818
893929: RNCC: 3 | RNVC: 2

15 Mar 1995

5975-01-411-3359
Interconnecting Box

014113359
123AV53308-1: RNCC: 3 | RNVC: 2
123AV53308-1: RNCC: 5 | RNVC: 9

23 Mar 1995

5975-01-379-2474
Electrical-Electronic Equipment Panel

013792474
13030212: RNCC: 3 | RNVC: 2
10339392: RNCC: 6 | RNVC: 9

30 Aug 1993

5975-01-379-7833
Guide Rail

013797833
687-9290-001: RNCC: 3 | RNVC: 2

8 Sep 1993

5975-01-379-3030
Cable Terminal Chamber

013793030
WRSS35/170-12: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-381-0684
Electrical-Electronic Equipment Chassis

013810684
13028246: RNCC: 3 | RNVC: 2
10339360: RNCC: 6 | RNVC: 9

7 Oct 1993

5975-01-381-4762
Electrical Equipment Mounting Base

013814762
RTS-CHASSIS: RNCC: 3 | RNVC: 2
91722113: RNCC: 5 | RNVC: 2

15 Oct 1993

5975-01-390-2703
Electrical Components Tie Down Strap

013902703
PRWP2S-CO: RNCC: 3 | RNVC: 2

16 May 1994

5975-01-390-7626
Electrical Nonmetallic Conduit Assembly

013907626
57350-4: RNCC: 3 | RNVC: 2

26 May 1994

5975-01-391-7356
Electrical Components Tie Down Strap

013917356
PRT 3S: RNCC: 3 | RNVC: 2

16 Jun 1994

5975-01-393-3505
Electrical Nonmetallic Conduit Assembly

013933505
5493230-44: RNCC: 3 | RNVC: 2

18 Jul 1994

5975-01-392-3144
Electrical Components Tie Down Strap

013923144
TY23M-2: RNCC: 3 | RNVC: 2

27 Jun 1994

5975-01-392-3092
Electrical-Electronic Equipment Chassis

013923092
BCAB332B: RNCC: 3 | RNVC: 2

27 Jun 1994

5975-01-288-9882
Electrical Equipment Rack

012889882
A3015094: RNCC: 3 | RNVC: 2
MT-6617/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-288-9880
Electrical Equipment Rack

012889880
A3015095: RNCC: 3 | RNVC: 2
MT-6618/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-293-1956
Junction Box

012931956
157D3511: RNCC: 3 | RNVC: 2

29 Jan 1989

5975-01-064-5819
Electrical Conduit Bushing

010645819
3871: RNCC: 3 | RNVC: 2

27 Aug 1978

5975-01-199-9375
Electrical Conduit Adapter

011999375
845-240: RNCC: 3 | RNVC: 2
845-240: RNCC: 3 | RNVC: 9

29 Jan 1985

5975-01-451-2626
Electrical-Electronic Equipment Chassis

014512626
11466098: RNCC: 3 | RNVC: 2

10 Dec 1997

5975-01-452-0032
Cable Hanger

014520032
CL-10: RNCC: 3 | RNVC: 2

12 Jan 1998

5975-01-452-1888
Electrical Equipment Mounting Base

014521888
10253246-29: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-451-7448
Electrical Conduit Coupling

014517448
GW9883: RNCC: 3 | RNVC: 2

30 Dec 1997

5975-01-451-6140
Insulator Cable

014516140
652-2807-004: RNCC: 3 | RNVC: 2

22 Dec 1997

5975-01-451-9445
Cable Marker Sleeve

014519445
013-007382-025: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-452-5895
Electrical Equipment Mounting Base

014525895
818268-811: RNCC: 3 | RNVC: 2

30 Jan 1998

5975-01-408-0240
Electrical Box Connector

014080240
TC-722: RNCC: 3 | RNVC: 1

9 Feb 1995

5975-01-408-4599
Electrical Equipment Rack

014084599
PV20/20ED-160080T: RNCC: 3 | RNVC: 2

16 Feb 1995

5975-01-408-6247
Electrical Equipment Rack

014086247
7011995-904: RNCC: 3 | RNVC: 2

22 Feb 1995

5975-01-376-4678
Junction Box

013764678
E989R: RNCC: 3 | RNVC: 9
00034481066996: RNCC: 5 | RNVC: 9

3 Jun 1993

5975-01-390-2474
Blank Panel

013902474
687-4434-004: RNCC: 3 | RNVC: 2

13 May 1994

5975-01-173-1871
Alignment Angle

011731871
619-0170-001: RNCC: 3 | RNVC: 2

3 Mar 1984

5975-01-259-1080
Junction Box

012591080
7010567-901: RNCC: 3 | RNVC: 2

13 Jul 1987

5975-01-041-1475
Electrical Components Tie Down Strap

010411475
SST1M30: RNCC: 3 | RNVC: 2
91827329: RNCC: 5 | RNVC: 2
A1213112: RNCC: 5 | RNVC: 2

20 May 1977

5975-01-190-6914
Electrical Components Tie Down Strap

011906914
SST1-5IC10: RNCC: 3 | RNVC: 2
91280691: RNCC: 5 | RNVC: 2

29 Sep 1984

5975-01-191-5226
Flexible Nonmetallic Conduit

011915226
FLEX-8-2X2: RNCC: 3 | RNVC: 2
10087275: RNCC: 6 | RNVC: 9
13029396-1: RNCC: 7 | RNVC: 2

10 Oct 1984

5975-01-450-3173
Electrical-Electronic Equipment Chassis

014503173
A405A136-N70: RNCC: 3 | RNVC: 2

3 Nov 1997

5975-01-449-3932
Flexible Metal Conduit Assembly

014493932
23A02417: RNCC: 3 | RNVC: 2

30 Sep 1997

5975-01-434-7923
Electronic Junction Rack

014347923
M81714/11-16D: RNCC: 4 | RNVC: 1

7 Aug 1996

5975-01-375-2298
Conduit Outlet Cover

013752298
6-1-9985-20: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2785
Electrical-Electronic Equipment Panel

013752785
68715-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-387-7570
Electrical Equipment Mounting Base

013877570
7334105G1: RNCC: 3 | RNVC: 2
7334094G1: RNCC: 5 | RNVC: 9

11 Mar 1994

5975-01-120-6998
Electrical Conduit Bend

011206998
16733: RNCC: 3 | RNVC: 2
16733: RNCC: 5 | RNVC: 9

22 Oct 1981

5975-01-024-6026
Module Assy Shelf

010246026
622-2289-001: RNCC: 3 | RNVC: 2

15 Jul 1976

5975-00-912-4877
Electrical Equipment Mounting Base

009124877
AA24G17: RNCC: 2 | RNVC: 2
MILA38137: RNCC: 4 | RNVC: 1
BL2570-2-1: RNCC: 5 | RNVC: 1
MTK40A24G17: RNCC: 5 | RNVC: 1
1841670-1: RNCC: 5 | RNVC: 1

1 Jan 1960

5975-01-448-7286
Electrical Components Tie Down Strap

014487286
WITS-4-18MR: RNCC: 3 | RNVC: 9
WITS-4-18MR: RNCC: 5 | RNVC: 2
WITS-4-18MR: RNCC: 5 | RNVC: 9

9 Sep 1997

5975-01-448-7836
Cable Marker Sleeve

014487836
TMS-SCE 1-1.5-9: RNCC: 3 | RNVC: 9

10 Sep 1997

5975-01-448-9738
Guide Rail

014489738
RC11090-2U: RNCC: 3 | RNVC: 2
9D0090-2U: RNCC: 5 | RNVC: 2

16 Sep 1997

5975-01-433-8052
Electrical-Electronic Equipment Chassis

014338052
6288930-2: RNCC: 3 | RNVC: 2
6288930: RNCC: D | RNVC: 9

11 Jul 1996

5975-01-455-4267
Switch Terminal Cover

014554267
29-26711-00: RNCC: 3 | RNVC: 2

1 May 1998

5975-01-455-6912
Rigid Metal Conduit

014556912
8316-1: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-456-8660
Mounting Frame

014568660
300-2096-003: RNCC: 3 | RNVC: 2

29 Jun 1998

5975-01-282-1483
Blank Panel

012821483
34-064367-101: RNCC: 3 | RNVC: 2
52.0258.014.01: RNCC: 5 | RNVC: 2
34-064367-101: RNCC: 5 | RNVC: 9

8 Jul 1988

5975-01-184-1697
Electrical Components Tie Down Strap

011841697
08-432: RNCC: 3 | RNVC: 2
SM-C-968361-1: RNCC: 3 | RNVC: 2

15 Jul 1984

5975-01-446-5011
Electrical Equipment Cabinet

014465011
LTR100: RNCC: 3 | RNVC: 9

7 Jul 1997

5975-01-430-9076
Electrical Equipment Mounting Base

014309076
10073-6658: RNCC: 3 | RNVC: 2

3 May 1996

5975-01-432-7219
Flexible Metal Conduit Assembly

014327219
10250675-104: RNCC: 3 | RNVC: 2
750-011NF48-50.5: RNCC: 5 | RNVC: 2

12 Jun 1996

5975-01-454-5306
Junction Box Cover

014545306
HDC18634: RNCC: 3 | RNVC: 2

3 Apr 1998

5975-01-455-3951
Electrical-Electronic Equipment Chassis

014553951
46100: RNCC: 3 | RNVC: 2

30 Apr 1998

5975-01-456-0322
Electrical Equipment Cabinet

014560322
1981619: RNCC: 3 | RNVC: 2

27 May 1998

5975-01-455-6939
Rigid Metal Conduit

014556939
8313-1: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-338-1488
Electrical Equipment Cabinet

013381488
H9642CA: RNCC: 3 | RNVC: 2

26 Apr 1991

5975-01-156-5565
Electrical Equipment Cabinet

011565565
0N312371-4: RNCC: 3 | RNVC: 2

22 Jun 1983

5975-01-156-5566
Electrical Equipment Cabinet

011565566
0N312371-5: RNCC: 3 | RNVC: 2

22 Jun 1983

5975-01-052-3055
Panel

010523055
136230-0001: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-01-181-8168
Protective Cover

011818168
3322254: RNCC: 3 | RNVC: 2
3322254: RNCC: 3 | RNVC: 9

15 Jun 1984

5975-00-822-7022
Electrical Equipment Cabinet Case

008227022
7100-0385: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-823-0054
Electrical Equipment Mounting Base

008230054
SCDL104390: RNCC: 3 | RNVC: 2
MT759APRC: RNCC: 5 | RNVC: 2
GD864-2: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-445-3869
Electrical Equipment Rack

014453869
735200-1: RNCC: 3 | RNVC: 9
735200-1: RNCC: C | RNVC: 1

2 Jun 1997

5975-01-444-2842
Fanning Strip

014442842
LS5957B022: RNCC: 3 | RNVC: 2

2 May 1997

5975-01-429-8200
Cable Marker Sleeve

014298200
N13714-050-005: RNCC: 3 | RNVC: 2

19 Apr 1996

5975-01-453-7542
Junction Box Assembly

014537542
5498057-16: RNCC: 3 | RNVC: 2

10 Mar 1998

5975-01-335-6555
Blank Panel

013356555
82401370-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-336-5112
Helicopter Block Mounting

013365112
4-055035-01: RNCC: 3 | RNVC: 2

27 Mar 1991

5975-01-152-3320
Bushing

011523320
SD-31421: RNCC: 3 | RNVC: 2

30 Apr 1983

5975-01-042-9531
Electrical Grounding Plate

010429531
0N205595: RNCC: 3 | RNVC: 2

17 Jun 1977

5975-01-177-0208
Electrical Equipment Shelf

011770208
ECT124-0000-1: RNCC: 3 | RNVC: 2

18 Apr 1984

5975-01-179-7728
Electrical-Electronic Equipment Panel

011797728
0N315114-505: RNCC: 3 | RNVC: 2

21 May 1984

5975-01-072-8365
Electrical Components Tie Down Strap

010728365
10S300-2-65: RNCC: 3 | RNVC: 9
10S300-2-65: RNCC: C | RNVC: 1

4 Mar 1979

5975-01-443-8350
Flexible Metal Conduit Assembly

014438350
10250675-78: RNCC: 3 | RNVC: 2

18 Apr 1997

5975-01-442-4645
Electrical Equipment Rack

014424645
90400136: RNCC: 3 | RNVC: 2

14 Mar 1997

5975-01-444-4564
Electrical Cable Protector

014444564
359038-1: RNCC: 3 | RNVC: 2

7 May 1997

5975-01-443-3049
Blank Panel

014433049
40104A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-452-0757
Electrical Equipment Mounting Base

014520757
8026418: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-450-9858
Electrical-Electronic Equipment Chassis

014509858
WS-C5500: RNCC: 3 | RNVC: 2

1 Dec 1997

5975-01-452-7807
Electrical Equipment Mounting Base

014527807
K939-1: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-01-151-9680
Electrical Equipment Mounting Base

011519680
622-1680-003: RNCC: 3 | RNVC: 2
MT-4842/A (): RNCC: 5 | RNVC: 2

25 Apr 1983

5975-01-237-4256
Electrical-Electronic Equipment Chassis

012374256
K55D058-1: RNCC: 3 | RNVC: 9

31 Jul 1986

5975-01-198-3624
Gauge

011983624
026-10558: RNCC: 3 | RNVC: 2
26-10558: RNCC: 5 | RNVC: 9

7 Jan 1985

5975-01-440-9973
Electrical Conduit Ferrule-Nut Coupling

014409973
M1671: RNCC: 3 | RNVC: 2
M1671: RNCC: 5 | RNVC: 9

30 Jan 1997

5975-01-441-2621
Electrical Equipment Cabinet

014412621
7168402-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5975-01-426-8614
Interconnecting Box

014268614
458965: RNCC: 3 | RNVC: 2
458965: RNCC: 3 | RNVC: 9

19 Mar 1996

5975-01-425-2779
Electrical Grounding Plate

014252779
Q2-53: RNCC: 3 | RNVC: 9
91709041: RNCC: 5 | RNVC: 9
BG40268: RNCC: 5 | RNVC: 9

15 Feb 1996

5975-01-331-5005
Electrical Components Tie Down Strap

013315005
PLT1.5I-C00: RNCC: 3 | RNVC: 2

20 Dec 1990

5975-01-411-7396
Junction Box Cover

014117396
320900: RNCC: 3 | RNVC: 2

30 Mar 1995

5975-01-233-7166
Electrical Equipment Cabinet

012337166
CY-2519D/WLR-1: RNCC: 3 | RNVC: 2
CY25190WLR1: RNCC: 5 | RNVC: 9

1 Jun 1986

5975-01-233-7167
Electrical Equipment Cabinet

012337167
CY25440WLR1: RNCC: 3 | RNVC: 9
CY-2544D/WLR-1: RNCC: 5 | RNVC: 2

1 Jun 1986

5975-01-235-3800
Blank Panel

012353800
630-0308: RNCC: 3 | RNVC: 2

28 Jun 1986

5975-01-439-7203
Electrical Equipment Foot

014397203
0317696: RNCC: 3 | RNVC: 2
0317696: RNCC: 3 | RNVC: 9
0317696: RNCC: 5 | RNVC: 2
0317696: RNCC: 5 | RNVC: 9

17 Dec 1996

5975-01-439-7201
Electrical Equipment Foot

014397201
0317695: RNCC: 3 | RNVC: 2
0317695: RNCC: 3 | RNVC: 9
0317695: RNCC: 5 | RNVC: 2
0317695: RNCC: 5 | RNVC: 9

17 Dec 1996

5975-01-440-6369
Junction Box

014406369
5496863-1: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-01-425-3172
Lock Wedge

014253172
03457000: RNCC: 3 | RNVC: 2
03457000: RNCC: 5 | RNVC: 9

16 Feb 1996

5975-01-425-2642
Lock Wedge

014252642
03457100: RNCC: 3 | RNVC: 2
03457100: RNCC: 5 | RNVC: 9

15 Feb 1996

5975-01-448-1768
Electrical Equipment Cabinet

014481768
GER112260-1: RNCC: 3 | RNVC: 2

22 Aug 1997

5975-01-330-7223
Electrical-Electronic Equipment Chassis

013307223
596795-G01: RNCC: 3 | RNVC: 2

7 Dec 1990

5975-01-330-7249
Junction Box

013307249
Z32-56A-35: RNCC: 3 | RNVC: 2
SC9540-0011-12: RNCC: 7 | RNVC: 9

7 Dec 1990

5975-01-329-9318
Electrical-Electronic Equipment Panel

013299318
SYS68K/WFC-1BP: RNCC: 3 | RNVC: 2

28 Nov 1990

5975-01-086-4483
Electrical Components Tie Down Strap

010864483
10S300-2-126: RNCC: 3 | RNVC: 9
10S300-2-126: RNCC: C | RNVC: 1

29 Nov 1979

5975-01-087-7585
Electrical Equipment Drawer

010877585
908D724G01: RNCC: 3 | RNVC: 1
908D724G01TR: RNCC: 5 | RNVC: 2
908D724G01: RNCC: 5 | RNVC: 9

25 Dec 1979

5975-01-408-6236
Electrical Equipment Rack

014086236
7015495-902: RNCC: 3 | RNVC: 2

22 Feb 1995

5975-01-171-0725
Electrical Conduit Adapter

011710725
S694-5-24-75R: RNCC: 3 | RNVC: 2
533405-551: RNCC: 7 | RNVC: 2

3 Feb 1984

5975-01-362-2535
Insulator Bracket

013622535
142D6397: RNCC: 3 | RNVC: 2

4 Aug 1992

5975-01-362-8772
Electrical-Electronic Equipment Panel

013628772
921101030-009: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-439-4015
Electrical Grounding Plate

014394015
7240730-00: RNCC: 3 | RNVC: 2

6 Dec 1996

5975-01-422-2903
Blank Panel

014222903
7589177G1: RNCC: 3 | RNVC: 2

28 Nov 1995

5975-01-422-8920
Electrical-Electronic Equipment Chassis

014228920
0N406546-1: RNCC: 3 | RNVC: 2

11 Dec 1995

5975-01-423-5404
Electronic Equipment Mounting Tray

014235404
103E4402G3: RNCC: 3 | RNVC: 2

31 Dec 1995

5975-01-445-6681
Electrical Equipment Rack

014456681
1.240.518.3: RNCC: 3 | RNVC: 2

9 Jun 1997

5975-01-445-8906
Junction Box

014458906
DBOX35: RNCC: 3 | RNVC: 9

16 Jun 1997

5975-01-445-8628
Cable Strain Relief Bushing

014458628
GB840B8: RNCC: 3 | RNVC: 2

13 Jun 1997

5975-01-445-8017
Electrical Equipment Mounting Base

014458017
4073373-0501: RNCC: 3 | RNVC: 2

12 Jun 1997

5975-01-446-3980
Bundle Spacer

014463980
TC5339: RNCC: 3 | RNVC: 2
971.32.18.105: RNCC: 5 | RNVC: 2

1 Jul 1997

5975-01-296-4666
Electrical Equipment Mounting Base

012964666
622-6433-003: RNCC: 3 | RNVC: 2

20 Mar 1989

5975-01-083-6528
Conduit Outlet Cover

010836528
G201S2: RNCC: 3 | RNVC: 2
G201S2: RNCC: 5 | RNVC: 9

28 Sep 1979

5975-01-085-4518
Electrical Box Connector

8 Nov 1979

5975-01-335-6564
Electrical-Electronic Equipment Chassis

013356564
86411486-2: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-335-6554
Blank Panel

013356554
82401270-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-398-1079
Rigid Metal Conduit

013981079
1310-0101-29: RNCC: 3 | RNVC: 2
1310-0101-29: RNCC: 5 | RNVC: 9

25 Oct 1994

5975-01-443-8352
Flexible Metal Conduit Assembly

014438352
10250675-96: RNCC: 3 | RNVC: 2

18 Apr 1997

5975-01-445-6655
Electrical Equipment Rack

014456655
E3662AOPTAW5: RNCC: 3 | RNVC: 2
E3662A: RNCC: 5 | RNVC: 2

9 Jun 1997

5975-01-293-7024
Junction Box

012937024
217F324: RNCC: 3 | RNVC: 2

4 Feb 1989

5975-01-394-0911
Flexible Metal Conduit Assembly

013940911
254228: RNCC: 3 | RNVC: 2

2 Aug 1994

5975-01-007-7318
Hammer Bushing Assy

010077318
3527614-01: RNCC: 3 | RNVC: 2

9 Aug 1975

5975-01-008-0715
Electrical-Electronic Equipment Chassis

010080715
G354635: RNCC: 3 | RNVC: 9
G354635: RNCC: 5 | RNVC: 9
G354635: RNCC: C | RNVC: 1

15 Aug 1975

5975-01-219-9536
Electrical Conductor Bushing

012199536
10-382697: RNCC: 3 | RNVC: 2

5 Nov 1985

5975-01-315-9373
Electrical-Electronic Equipment Chassis

013159373
897E517G25: RNCC: 3 | RNVC: 2

28 Feb 1990

5975-01-316-4320
Electrical-Electronic Equipment Panel

013164320
130339: RNCC: 3 | RNVC: 9
130339: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-01-316-4316
Electrical-Electronic Equipment Panel

013164316
70550-24516-101: RNCC: 3 | RNVC: 2

8 Mar 1990

5975-01-359-9617
Electrical-Electronic Equipment Chassis

013599617
687-2638-002: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-01-442-6818
Electrical-Electronic Equipment Chassis

014426818
CISCO72Q4: RNCC: 3 | RNVC: 2

20 Mar 1997

5975-01-293-4660
Cable Terminal Chamber

012934660
469583-1: RNCC: 3 | RNVC: 2
658/1/00055/000: RNCC: 5 | RNVC: 2

3 Feb 1989

5975-01-279-8938
Blank Panel

012798938
473451: RNCC: 3 | RNVC: 2

26 May 1988

5975-01-358-0356
Blank Panel

013580356
4-494268-01: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-330-7353
Electrical-Electronic Equipment Panel

013307353
130-1166-001: RNCC: 3 | RNVC: 2
130-1166-001: RNCC: 3 | RNVC: 9

7 Dec 1990

5975-01-332-0442
Electrical-Electronic Equipment Panel

013320442
5-18761: RNCC: 3 | RNVC: 2
5019846-004: RNCC: 5 | RNVC: 2

2 Jan 1991

5975-01-440-2045
Electrical Grounding Plate

014402045
6387550-9: RNCC: 3 | RNVC: 2

7 Jan 1997

5975-01-440-6410
Electrical-Electronic Equipment Panel

014406410
5597948-29: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-01-291-0358
Turn Rack

012910358
0020170010: RNCC: 3 | RNVC: 2
2017: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-01-291-4095
Flat Panel Ear

012914095
FPE-5: RNCC: 3 | RNVC: 2

28 Dec 1988

5975-00-992-9035
Electrical Conduit Adapter

009929035
2592B52: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-306-2012
Electrical-Electronic Equipment Chassis

013062012
749443: RNCC: 3 | RNVC: 2

19 Aug 1989

5975-01-308-9448
Plate

013089448
70083-55014-102: RNCC: 3 | RNVC: 2

8 Oct 1989

5975-01-356-2882
Electrical Conduit Bushing

013562882
130-11-AL-8-32P: RNCC: 3 | RNVC: 2

1 Apr 1992

5975-01-329-4322
Electrical Equipment Drawer

013294322
750350-1: RNCC: 3 | RNVC: 9
750350-1: RNCC: C | RNVC: 1

16 Nov 1990

5975-01-439-7133
Electrical Components Tie Down Strap

014397133
AE 715: RNCC: 3 | RNVC: 2

17 Dec 1996

5975-01-440-5593
Junction Box

014405593
4-301-045-04: RNCC: 3 | RNVC: 9

16 Jan 1997

5975-01-287-1952
Blank Panel

012871952
132525G1: RNCC: 3 | RNVC: 1

18 Oct 1988

5975-01-270-6720
Conduit Outlet Cover

012706720
2FT: RNCC: 3 | RNVC: 2

12 Jan 1988

5975-00-982-5915
Electrical Equipment Mounting Base

009825915
2085715-1: RNCC: 3 | RNVC: 2
2087017-1201: RNCC: 5 | RNVC: 2
MTA12B: RNCC: 5 | RNVC: 9

14 Oct 1966

5975-01-206-8867
Electrical Cable Nipple

012068867
1-1464-04: RNCC: 3 | RNVC: 9

24 Apr 1985

5975-01-353-0346
Electrical Nonmetallic Conduit Assembly

013530346
5497312-29: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-327-0033
Electrical Equipment Drawer

013270033
7N269-1: RNCC: 3 | RNVC: 1
9N104-6: RNCC: 5 | RNVC: 1
9N104PC6: RNCC: 5 | RNVC: 1
7N269-1: RNCC: 5 | RNVC: 1

5 Oct 1990

5975-01-189-3022
Cable Hanger

011893022
339129: RNCC: 3 | RNVC: 2

14 Sep 1984

5975-01-270-5563
Electrical-Electronic Equipment Chassis

012705563
10045205-101: RNCC: 3 | RNVC: 2

8 Jan 1988

5975-01-269-5261
Blank Panel

012695261
200-3199-01: RNCC: 3 | RNVC: 2
200/2742/02: RNCC: 5 | RNVC: 9

18 Dec 1987

5975-01-239-2368
Electrical-Electronic Equipment Panel

012392368
8680371-513: RNCC: 3 | RNVC: 2
8680371-513: RNCC: 5 | RNVC: 9

27 Aug 1986

5975-01-241-0347
Mounting Plate

012410347
823-2: RNCC: 3 | RNVC: 2

20 Sep 1986

5975-00-669-9138
Electrical Box Connector

006699138
DBZM6824: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-689-9621
Stuffing Tube Packing Nut

006899621
REB101374-3REVN: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-023-8773
Shutter Body

010238773
85-12870-0010: RNCC: 3 | RNVC: 2

28 Jun 1976

5975-01-146-9610
Electrical Equipment Mounting Base

011469610
522-3566-016: RNCC: 3 | RNVC: 2

8 Feb 1983

5975-01-348-8853
Interconnecting Box

013488853
978583-101: RNCC: 3 | RNVC: 2

19 Nov 1991

5975-01-350-7412
Electrical Equipment Mounting Base

013507412
4008-115: RNCC: 3 | RNVC: 2
4008-115: RNCC: 5 | RNVC: 9

20 Dec 1991

5975-01-323-0428
Electrical-Electronic Equipment Chassis

013230428
519.794: RNCC: 3 | RNVC: 2
519.794: RNCC: 5 | RNVC: 2
MR55-1/BG55-1: RNCC: 5 | RNVC: 9
MR-55-1: RNCC: 5 | RNVC: 9

19 Jul 1990

5975-01-322-7586
Electrical Equipment Rack

013227586
33494-2: RNCC: 3 | RNVC: 2
33494-2: RNCC: 5 | RNVC: 2

13 Jul 1990

5975-01-324-2909
Ground Rod

013242909
GR7508P: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-348-6072
Electrical Cable Protector

013486072
PMMCAPG: RNCC: 3 | RNVC: 2

14 Nov 1991

5975-01-349-2825
Electrical Conductor Bushing

013492825
186255-FB5000: RNCC: 3 | RNVC: 2
117-3B0625: RNCC: 5 | RNVC: 9

23 Nov 1991

5975-01-348-3713
Electrical-Electronic Equipment Chassis

013483713
230-0038-001: RNCC: 3 | RNVC: 2
230-0038-001: RNCC: 3 | RNVC: 9

8 Nov 1991

5975-01-351-9921
Electrical Equipment Mounting Base

013519921
800-RW-02-01-3: RNCC: 3 | RNVC: 2

17 Jan 1992

5975-00-798-9195
Electrical Equipment Rack

007989195
CE186993-14: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-348-3352
Electrical Conduit Adapter

013483352
120182600: RNCC: 3 | RNVC: 2

8 Nov 1991

5975-01-368-9665
Electrical-Electronic Equipment Chassis

013689665
652-3937-002: RNCC: 3 | RNVC: 2

12 Dec 1992

5975-01-322-7489
Electrical Equipment Mounting Base

013227489
13028912-1: RNCC: 3 | RNVC: 2

13 Jul 1990

5975-01-342-2247
Hanger Clamp

013422247
14HL789: RNCC: 3 | RNVC: 9

17 Jul 1991

5975-01-342-4681
Electrical Equipment Mounting Base

013424681
34084570-001: RNCC: 3 | RNVC: 2
MT-6359A/ASN: RNCC: 5 | RNVC: 1

24 Jul 1991

5975-01-342-6984
Electrical Cable Nipple

013426984
2159552-2: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-1514
Electrical-Electronic Equipment Panel

013421514
10279-2005: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-343-4977
Flexible Metal Conduit Assembly

013434977
NAF1150-4A148: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-272-1533
Electrical Components Tie Down Strap

012721533
SST2IM: RNCC: 3 | RNVC: 2

4 Feb 1988

5975-01-341-8044
Strain Electrical Conductor Clamp

013418044
021-9556-01: RNCC: 3 | RNVC: 9

9 Jul 1991

5975-01-344-7948
Cable Hanger

013447948
TAS100L: RNCC: 3 | RNVC: 2

6 Sep 1991

5975-01-346-0793
Electrical-Electronic Equipment Chassis

013460793
TM 5006A: RNCC: 3 | RNVC: 9
TM5006A: RNCC: 5 | RNVC: 2
TM 5006A: RNCC: 5 | RNVC: 9

26 Sep 1991

5975-01-303-6771
Electrical Components Tie Down Strap

013036771
696-40527-6-9: RNCC: 3 | RNVC: 2
696-40527-6-9-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-00-955-1752
Electrical-Electronic Equipment Chassis

009551752
0N007917: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-346-7194
Electronic Junction Rack

013467194
MRTB-15: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-01-346-7193
Electrical Equipment Mounting Base

013467193
90-4-1002-2: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-01-346-8144
Blank Panel

013468144
DAA3233D482-001: RNCC: 3 | RNVC: 2

10 Oct 1991

5975-01-347-3577
Electrical-Electronic Equipment Panel

013473577
408646-1: RNCC: 3 | RNVC: 2

19 Oct 1991

5975-01-368-3340
Electrical Conduit Locknut

013683340
7415043P003: RNCC: 3 | RNVC: 2

29 Nov 1992

5975-01-338-5054
Electrical-Electronic Equipment Chassis

013385054
617-8762-007: RNCC: 3 | RNVC: 2

4 May 1991

5975-01-340-1379
Cable Marker Sleeve

013401379
506658-7: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-341-1177
Electrical Components Tie Down Strap

013411177
PLT1S-M8: RNCC: 3 | RNVC: 2

25 Jun 1991

5975-01-292-6539
Electrical-Electronic Equipment Chassis

012926539
ANDS5400-B-B: RNCC: 3 | RNVC: 2

20 Jan 1989

5975-01-290-4224
Electrical Conduit Adapter

012904224
225M510-19A: RNCC: 3 | RNVC: 2

10 Dec 1988

5975-01-291-6085
Electrical-Electronic Equipment Panel

012916085
28257-2: RNCC: 3 | RNVC: 9
283550-1206: RNCC: 5 | RNVC: 2

31 Dec 1988

5975-01-340-1375
Cable Marker Sleeve

013401375
506657-14: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2711
Fanning Strip

013402711
8-160B-R: RNCC: 3 | RNVC: 2
327-22-08-001: RNCC: 5 | RNVC: 9

11 Jun 1991

5975-01-340-2669
Electrical Components Tie Down Strap

013402669
506657-33: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2888
Cable Marker Sleeve

013402888
506658-2: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-341-3716
Electrical-Electronic Equipment Chassis

013413716
30408-101: RNCC: 3 | RNVC: 2

27 Jun 1991

5975-01-341-3715
Electrical-Electronic Equipment Chassis

013413715
30361-503: RNCC: 3 | RNVC: 2

27 Jun 1991

5975-00-822-1441
Electrical Conduit Nipple

008221441
96-28300-001: RNCC: 3 | RNVC: 9
96-28300-001: RNCC: 5 | RNVC: 9
96-28300-001: RNCC: 5 | RNVC: 9
96-28300-001: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-468-9194
Junction Box

014689194
310-045820: RNCC: 3 | RNVC: 2
310-045820: RNCC: 5 | RNVC: 9

27 Oct 1999

5975-01-468-9202
Flexible Metal Conduit Assembly

014689202
200180-0032: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-366-4190
Electrical Equipment Mounting Base

013664190
A206A929-101: RNCC: 3 | RNVC: 2

25 Oct 1992

5975-01-366-4942
Electrical-Electronic Equipment Chassis

013664942
1970AS656-1: RNCC: 3 | RNVC: 2

27 Oct 1992

5975-01-366-4172
Blank Panel

013664172
TR101EL: RNCC: 3 | RNVC: 9
1R001FE ITEM 9: RNCC: 5 | RNVC: 1

25 Oct 1992

5975-01-326-5858
Electrical Equipment Rack

013265858
TM506AOPT10: RNCC: 3 | RNVC: 2

27 Sep 1990

5975-01-327-3868
Electrical-Electronic Equipment Panel

013273868
70550-24521-044: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-290-5789
Electrical Equipment Mounting Base

012905789
706293-801: RNCC: 3 | RNVC: 2
MT-CA-356: RNCC: 5 | RNVC: 2
700293: RNCC: D | RNVC: 9

13 Dec 1988

5975-01-280-9215
Junction Box

012809215
2602: RNCC: 3 | RNVC: 2
2602: RNCC: 5 | RNVC: 9

15 Jun 1988

5975-01-283-5644
Switch Box Case

012835644
62115-3: RNCC: 3 | RNVC: 2

9 Aug 1988

5975-00-950-0588
Cable Strain Relief Bushing

009500588
SR3P1: RNCC: 3 | RNVC: 2
30003-405D18-1: RNCC: 5 | RNVC: 2
1521R: RNCC: 5 | RNVC: 2
414913-1: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-468-8117
Junction Box

014688117
24401-15: RNCC: 3 | RNVC: 2

22 Oct 1999

5975-01-468-9256
Flexible Metal Conduit Assembly

014689256
254716: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-7410
Electrical Equipment Rack

014687410
515R: RNCC: 3 | RNVC: 2
515R: RNCC: 5 | RNVC: 2

20 Oct 1999

5975-01-364-0312
Electrical Components Tie Down Strap

013640312
SST1M010: RNCC: 3 | RNVC: 2

11 Sep 1992

5975-01-364-5812
Electrical Conduit Coupling Nut

013645812
10280-2037: RNCC: 3 | RNVC: 2

22 Sep 1992

5975-01-324-2911
Ground Rod

013242911
5008: RNCC: 3 | RNVC: 2
7228447P001: RNCC: 5 | RNVC: 2

14 Aug 1990

5975-01-325-7612
Surface Mount Enclosure

013257612
10250T-N12: RNCC: 3 | RNVC: 2

11 Sep 1990

5975-00-613-0921
Clenching Rim Clamp

006130921
SM-A-120230: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-466-0008
Electrical Equipment Rack

014660008
J1501A: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-01-465-8029
Flexible Metal Conduit Assembly

014658029
S6162-63806-9: RNCC: 3 | RNVC: 2

22 Jun 1999

5975-01-465-7240
Electrical Wall Plate

014657240
7-511115146-13: RNCC: 3 | RNVC: 2

18 Jun 1999

5975-01-361-2834
Mounting Kit

013612834
MS6: RNCC: 3 | RNVC: 2

13 Jul 1992

5975-01-362-4740
Electrical-Electronic Equipment Panel

013624740
924000260-009: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-362-1334
Electrical Conduit Locknut

013621334
08030913: RNCC: 3 | RNVC: 9

1 Aug 1992

5975-01-324-2908
Ground Rod

013242908
GR6260: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-324-2910
Ground Rod

013242910
GR7510: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-324-1660
Electrical Equipment Mounting Base

013241660
10088502-101: RNCC: 3 | RNVC: 9

11 Aug 1990

5975-01-238-1132
Strain Electrical Conductor Clamp

012381132
204-83179-5: RNCC: 3 | RNVC: 2

11 Aug 1986

5975-01-041-1385
Electrical Equipment Mounting Base

010411385
2087017-1202: RNCC: 3 | RNVC: 2
MTA-12B1: RNCC: 5 | RNVC: 2

20 May 1977

5975-01-461-7744
Electrical-Electronic Equipment Panel

014617744
16E2848-3: RNCC: 3 | RNVC: 2

1 Jan 1999

5975-01-462-3236
Electrical Equipment Rack

014623236
CCHA40340: RNCC: 3 | RNVC: 2

28 Jan 1999

5975-01-359-0002
Metallic Raceway Assembly

013590002
159C355G01: RNCC: 3 | RNVC: 2
159C355G01: RNCC: 3 | RNVC: 9

27 May 1992

5975-01-358-9927
Electrical Conduit Adapter

013589927
710AS002B1609: RNCC: 3 | RNVC: 2
710AS002B16-09: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-359-6057
Electrical Box Connector

013596057
7208952P004: RNCC: 3 | RNVC: 2

10 Jun 1992

5975-01-360-3153
Electrical Equipment Cabinet

013603153
202905-2: RNCC: 3 | RNVC: 2
CY-5304/APX-72: RNCC: 5 | RNVC: 2

21 Jun 1992

5975-01-359-9615
Electrical-Electronic Equipment Chassis

013599615
687-2645-002: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-01-320-0385
Electrical-Electronic Equipment Chassis

013200385
635-9913-001: RNCC: 3 | RNVC: 2

18 May 1990

5975-01-281-2592
Junction Box Assembly

012812592
13217E7132: RNCC: 3 | RNVC: 2

21 Jun 1988

5975-01-234-5706
Actuator Boot

012345706
555-012-101: RNCC: 3 | RNVC: 2
555-023-101: RNCC: 5 | RNVC: 9

16 Jun 1986

5975-01-235-0062
Electrical Components Tie Down Strap

012350062
SST2I-C: RNCC: 3 | RNVC: 2
SST2I-C: RNCC: 5 | RNVC: 2

23 Jun 1986

5975-01-440-5489
Electrical-Electronic Equipment Chassis

014405489
5211176-01: RNCC: 3 | RNVC: 2

16 Jan 1997

5975-01-443-2084
Electrical-Electronic Equipment Panel

014432084
DAA3222D565-013: RNCC: 3 | RNVC: 2

3 Apr 1997

5975-01-444-7783
Guide Rail

014447783
RC11090-5U: RNCC: 3 | RNVC: 2
9D0090-5U: RNCC: 5 | RNVC: 2
RC11090: RNCC: D | RNVC: 9

16 May 1997

5975-00-603-5211
Electrical Components Tie Down Strap

006035211
674-3-6DR: RNCC: 3 | RNVC: 2
825632-00: RNCC: 5 | RNVC: 9

18 Jan 1975

5975-01-462-6214
Electrical-Electronic Equipment Panel

014626214
17G231540-1: RNCC: 3 | RNVC: 2

10 Feb 1999

5975-01-319-7651
Cable Marker Sleeve

013197651
SS7074-3059: RNCC: 3 | RNVC: 2

15 May 1990

5975-01-522-5179
Blank Panel

015225179
004580: RNCC: 3 | RNVC: 2

3 Aug 2004

5975-01-436-5149
Electrical-Electronic Equipment Panel

014365149
2416396: RNCC: 3 | RNVC: 2
2416396: RNCC: 3 | RNVC: 9
2416396: RNCC: 5 | RNVC: 2
2416396: RNCC: 5 | RNVC: 9

20 Sep 1996

5975-01-259-5226
Blade

012595226
8000-417K: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-00-909-4975
Suspension Clamp

009094975
2200: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-01-459-8000
Raceway Cover

014598000
8902-8: RNCC: 3 | RNVC: 2

15 Oct 1998

5975-01-460-5451
Electrical Lead And Conduit Assembly

014605451
227749-DL0000: RNCC: 3 | RNVC: 2

9 Nov 1998

5975-01-460-0609
Electrical Equipment Mounting Base

014600609
622-8124-001: RNCC: 3 | RNVC: 2

23 Oct 1998

5975-01-460-9232
Electrical-Electronic Equipment Chassis

014609232
11441866: RNCC: 3 | RNVC: 2

20 Nov 1998

5975-01-461-2382
Flexible Metal Conduit Assembly

014612382
230340-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-555: RNCC: 7 | RNVC: 2

4 Dec 1998

5975-01-460-9233
Electrical Equipment Drawer

014609233
11442225: RNCC: 3 | RNVC: 2

20 Nov 1998

5975-01-356-0632
Electrical-Electronic Equipment Chassis

013560632
PM-1150/5: RNCC: 3 | RNVC: 2

28 Mar 1992

5975-01-356-2267
Electrical-Electronic Equipment Panel

013562267
685-9787-001: RNCC: 3 | RNVC: 2
685-9787-001: RNCC: 5 | RNVC: 2

30 Mar 1992

5975-01-514-7789
Flexible Nonmetallic Conduit

015147789
749-656-1-118.84: RNCC: 3 | RNVC: 2
5D0554-1: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-522-1060
Cable Marker Sleeve

015221060
TMS-SCE-3/32-2.0-S1-9: RNCC: 3 | RNVC: 2
ECS6036BN9: RNCC: 5 | RNVC: 2

19 Jul 2004

5975-00-636-1836
Conduit Outlet Cover

006361836
SP24C2: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-458-5831
Electrical-Electronic Equipment Chassis

014585831
16-4368-01: RNCC: 3 | RNVC: 9

31 Aug 1998

5975-01-459-2236
Electrical Equipment Cabinet

014592236
304110-B21: RNCC: 3 | RNVC: 2

24 Sep 1998

5975-01-317-6841
Cable Marker Sleeve

013176841
SS7026-476: RNCC: 3 | RNVC: 2

4 Apr 1990

5975-01-514-7254
Electrical-Electronic Equipment Panel

015147254
233N3209-25: RNCC: 3 | RNVC: 2

3 Nov 2003

5975-01-457-7187
Electrical-Electronic Equipment Panel

014577187
HM021-080-11: RNCC: 3 | RNVC: 2

31 Jul 1998

5975-01-457-6456
Electrical-Electronic Equipment Chassis

014576456
213A749-1: RNCC: 3 | RNVC: 9

30 Jul 1998

5975-01-353-0425
Electrical Equipment Cabinet

013530425
DCV-50132: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-317-6032
Electrical Wall Plate

013176032
66601-158: RNCC: 3 | RNVC: 9

1 Apr 1990

5975-01-318-0044
Electrical Equipment Mounting Base

013180044
622-8115-001: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-01-287-1887
Electrical-Electronic Equipment Panel

012871887
3120-001K: RNCC: 3 | RNVC: 9

18 Oct 1988

5975-01-509-8370
Special Pin Assy

015098370
1005042-3: RNCC: 3 | RNVC: 2
1005042-3: RNCC: 5 | RNVC: 2

3 Jul 2003

5975-01-321-4471
Cable Marker Sleeve

013214471
SS7074-1730: RNCC: 3 | RNVC: 2

18 Jun 1990

5975-01-457-2868
Electrical Equipment Drawer

014572868
VD-4100-99-1375: RNCC: 3 | RNVC: 2

17 Jul 1998

5975-01-328-5917
Electrical Wye

013285917
A901AX1216DA/18: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-329-2236
Panel Center

013292236
70550-01166-101: RNCC: 3 | RNVC: 2

13 Nov 1990

5975-01-278-2576
Electrical-Electronic Equipment Panel

012782576
1033411-1: RNCC: 3 | RNVC: 2
1033411-1: RNCC: 5 | RNVC: 9

3 May 1988

5975-01-278-6574
Electrical-Electronic Equipment Panel

012786574
411336-01: RNCC: 3 | RNVC: 2

7 May 1988

5975-01-307-7751
Mounting Fixture

013077751
391034: RNCC: 3 | RNVC: 2

16 Sep 1989

5975-01-285-8643
Electrical-Electronic Equipment Chassis

012858643
20498192: RNCC: 3 | RNVC: 9

22 Sep 1988

5975-01-286-1346
Electrical-Electronic Equipment Panel

012861346
7908531-002: RNCC: 3 | RNVC: 2

27 Sep 1988

5975-01-320-1835
Electrical-Electronic Equipment Chassis

013201835
799204625-019: RNCC: 3 | RNVC: 2

22 May 1990

5975-01-455-3384
Electrical Equipment Rack

014553384
340-0037: RNCC: 3 | RNVC: 2
190078-018: RNCC: 5 | RNVC: 2
340-0037: RNCC: 5 | RNVC: 9

29 Apr 1998

5975-01-455-9937
Electrical Tie Down Mounting Base

014559937
CB4020V3N24-750: RNCC: 3 | RNVC: 2
9D0271-105T: RNCC: 3 | RNVC: 2

26 May 1998

5975-01-456-4371
Flexible Metal Conduit Assembly

014564371
227631-DL0000: RNCC: 3 | RNVC: 2

12 Jun 1998

5975-01-456-7049
Electrical Equipment Mounting Base

014567049
209F722-1: RNCC: 3 | RNVC: 2

23 Jun 1998

5975-01-373-9515
Flexible Metal Conduit

013739515
6-1-9985-16: RNCC: 3 | RNVC: 2

13 Apr 1993

5975-01-374-1862
Electrical Equipment Rack

013741862
010A020-001: RNCC: 3 | RNVC: 2

17 Apr 1993

5975-01-375-3517
Electrical Equipment Mounting Base

013753517
G400195-1: RNCC: 3 | RNVC: 2

8 May 1993

5975-01-375-3381
Electrical Components Tie Down Strap

013753381
PLT6EH-Q: RNCC: 3 | RNVC: 2

8 May 1993

5975-01-483-9936
Cable Marker Sleeve

014839936
2540806-68: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-485-3156
Metallic Raceway

014853156
106895003: RNCC: 3 | RNVC: 2

22 May 2001

5975-01-486-3007
Cable Marker Sleeve

014863007
651667: RNCC: 3 | RNVC: 2

25 Jun 2001

5975-01-313-7522
Electrical Equipment Rack

013137522
10242-6400: RNCC: 3 | RNVC: 2

16 Jan 1990

5975-01-008-2164
Electrical-Electronic Equipment Chassis

010082164
G354690: RNCC: 3 | RNVC: 9
G354690: RNCC: 5 | RNVC: 9
G354690: RNCC: C | RNVC: 1

17 Aug 1975

5975-01-453-7697
Cable Marker Sleeve

014537697
M235A774-49: RNCC: 3 | RNVC: 2

10 Mar 1998

5975-01-373-6233
Electrical-Electronic Equipment Chassis

013736233
8921-210: RNCC: 3 | RNVC: 9
91741009: RNCC: 5 | RNVC: 2
91741009: RNCC: 5 | RNVC: 9

8 Apr 1993

5975-01-373-9962
Cable Marker Sleeve

013739962
TRSA1014/E/2/13: RNCC: 3 | RNVC: 2
99045987: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-304-3767
Crossarm Brace

013043767
412-070-830-101: RNCC: 3 | RNVC: 2

18 Jul 1989

5975-01-285-8640
Electrical-Electronic Equipment Chassis

012858640
7012431-901: RNCC: 3 | RNVC: 2

22 Sep 1988

5975-01-372-2376
Electrical Equipment Mounting Base

013722376
10106: RNCC: 3 | RNVC: 2
17B9E1000-511: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-455-7384
Electrical Conduit Coupling

014557384
8493-1: RNCC: 3 | RNVC: 2
B001-04-000-04: RNCC: 5 | RNVC: 9

13 May 1998

5975-01-458-4458
Electrical-Electronic Equipment Chassis

014584458
00-358551-00001: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-01-460-8385
Electrical Conduit Nipple

014608385
8356-1: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-00-692-9432
Flexible Metal Conduit Assembly

006929432
8391639: RNCC: 3 | RNVC: 2
2896E: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-692-9434
Flexible Metal Conduit Assembly

006929434
8391641: RNCC: 3 | RNVC: 2
2898E: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-507-3825
Electrical-Electronic Equipment Chassis

015073825
EJ024666-1: RNCC: 3 | RNVC: 9

25 Apr 2003

5975-01-301-7486
Electronic Junction Rack

013017486
2043829-4: RNCC: 3 | RNVC: 2

2 Jun 1989

5975-01-371-2087
Electrical-Electronic Equipment Chassis

013712087
MMAC-8FNB: RNCC: 3 | RNVC: 2

8 Feb 1993

5975-01-370-5809
Electrical Equipment Mounting Base

013705809
622-7210-002: RNCC: 3 | RNVC: 2

26 Jan 1993

5975-01-370-6896
Electrical-Electronic Equipment Chassis

013706896
150-20055-00: RNCC: 3 | RNVC: 2

29 Jan 1993

5975-01-371-2804
Electrical Bonding Ring

013712804
TR14BI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
91650832: RNCC: 5 | RNVC: 2
TR14BI: RNCC: 5 | RNVC: 9

10 Feb 1993

5975-01-455-0279
Turbo Chann Adapter

014550279
54-20430-01: RNCC: 3 | RNVC: 2

20 Apr 1998

5975-01-499-5312
Interconnecting Box

014995312
5-603-143: RNCC: 3 | RNVC: 2

26 Jul 2002

5975-01-499-2646
Electrical Components Tie Down Strap

014992646
634-004-001: RNCC: 3 | RNVC: 2

17 Jul 2002

5975-01-498-5657
Rigid Metal Conduit

014985657
5HM34101-109: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-294-7027
Electrical Equipment Cabinet

012947027
7073260-77: RNCC: 3 | RNVC: 2

22 Feb 1989

5975-01-448-4513
Electrical-Electronic Equipment Panel

014484513
3342834-3: RNCC: 3 | RNVC: 2

28 Aug 1997

5975-00-060-6365
Junction Box Cover

000606365
CE223275: RNCC: 3 | RNVC: 2

10 Jun 1967

5975-01-475-9381
Electrical Equipment Cabinet

014759381
PER400AR24A: RNCC: 3 | RNVC: 2
PER400AR24A: RNCC: 5 | RNVC: 2
1202EA: RNCC: 5 | RNVC: 9

19 Jun 2000

5975-01-483-5255
Electrical Equipment Rack

014835255
842-649200: RNCC: 3 | RNVC: 2
842-649200: RNCC: 5 | RNVC: 2

30 Mar 2001

5975-01-293-8707
Electrical Equipment Rack

012938707
A3047252: RNCC: 3 | RNVC: 2
MT-6653/G: RNCC: 5 | RNVC: 2

8 Feb 1989

5975-01-368-0686
Electrical Equipment Rack

013680686
9160584-02: RNCC: 1 | RNVC: 2
4695-40: RNCC: 3 | RNVC: 2

25 Nov 1992

5975-01-299-8976
Strain Electrical Conductor Clamp

012998976
SS815GB03L32: RNCC: 3 | RNVC: 2
1166153-1: RNCC: 3 | RNVC: 9
SS815GB03L32: RNCC: 5 | RNVC: 2
1166153-1: RNCC: C | RNVC: 1

7 May 1989

5975-01-249-9820
Conduit Box Base

012499820
04X00004-0206: RNCC: 3 | RNVC: 2
04X00004-0206: RNCC: 5 | RNVC: 9
5975PL0724626: RNCC: 6 | RNVC: 9

21 Feb 1987

5975-01-476-8898
Electrical Standardized Components Case Section

014768898
10522-4575-02: RNCC: 3 | RNVC: 2

25 Jul 2000

5975-00-703-0879
Blank Panel

007030879
LS4174-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-802-9061
Co Fitting Assembly

008029061
6828096: RNCC: 3 | RNVC: 2
6828096: RNCC: 5 | RNVC: 2
6828096: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-234-6640
Wiring Duct

012346640
LD5WH6-A: RNCC: 3 | RNVC: 2

18 Jun 1986

5975-01-297-9703
Electrical-Electronic Equipment Panel

012979703
3045-1007-01: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-470-8293
Metallic Raceway Assembly

014708293
068437: RNCC: 3 | RNVC: 2

11 Jan 2000

5975-01-531-3122
Audi0 Panel Assembly

015313122
D-3889-1: RNCC: 3 | RNVC: 2
D-3548-1: RNCC: 5 | RNVC: 9

1 Jul 2005

5975-01-559-2606
Electrical Equipment Rack

015592606
60257601200-10: RNCC: 3 | RNVC: 2

11 Dec 2007

5975-01-533-3969
Electronic Equipment Mounting Tray

015333969
047-05193-0002: RNCC: 3 | RNVC: 2

13 Sep 2005

5975-01-544-5608
Electrical Equipment Rack

015445608
8-6A056272: RNCC: 3 | RNVC: 2

16 Oct 2006

5975-01-291-6084
Electrical-Electronic Equipment Panel

012916084
28312-1: RNCC: 3 | RNVC: 2
283550-1208: RNCC: 5 | RNVC: 2

31 Dec 1988

5975-01-333-4076
Electrical Conduit Adapter

013334076
710-S017NF32D: RNCC: 3 | RNVC: 2

3 Feb 1991

5975-01-231-8730
Transistor Holder

012318730
352-1111-010: RNCC: 3 | RNVC: 2
SRF2264P: RNCC: 5 | RNVC: 9

6 May 1986

5975-01-322-1484
Electrical-Electronic Equipment Panel

013221484
200-2618-00: RNCC: 3 | RNVC: 2

29 Jun 1990

5975-01-322-2814
Electrical Components Tie Down Strap

013222814
11465817-3: RNCC: 3 | RNVC: 2

30 Jun 1990

5975-01-322-0439
Flexible Nonmetallic Conduit

013220439
717-1613-0: RNCC: 3 | RNVC: 2

28 Jun 1990

5975-01-322-7585
Electrical Equipment Cabinet

013227585
14-87710-00: RNCC: 3 | RNVC: 2
B2-87710: RNCC: 5 | RNVC: 9

13 Jul 1990

5975-01-513-8394
Electrical Equipment Rack

015138394
5HU50400-107: RNCC: 3 | RNVC: 2

7 Oct 2003

5975-01-514-7805
Flexible Nonmetallic Conduit

015147805
749-656-5-51.86: RNCC: 3 | RNVC: 2
5D0561-1: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-514-7790
Flexible Nonmetallic Conduit

015147790
749-656-1-120.44: RNCC: 3 | RNVC: 2
5D0554-2: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-463-3827
Electrical-Electronic Equipment Chassis

014633827
03-05149-001: RNCC: 3 | RNVC: 2

18 Mar 1999

5975-01-467-1111
Electrical-Electronic Equipment Chassis

014671111
7005588-1: RNCC: 3 | RNVC: 2

13 Aug 1999

5975-00-762-1251
Electrical Components Tie Down Strap

007621251
TY527MX: RNCC: 3 | RNVC: 2
TY527MX: RNCC: 5 | RNVC: 2
TY27MX-50: RNCC: 5 | RNVC: 9

15 Oct 1972

5975-00-346-3668
Cord Assy Fastener

003463668
CE88144: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-767-7407
Electrical-Electronic Equipment Chassis

007677407
664295: RNCC: 3 | RNVC: 2

15 Mar 1968

5975-01-527-0236
Electrical-Electronic Equipment Chassis

015270236
S30A121: RNCC: 3 | RNVC: 9
S30A121: RNCC: 5 | RNVC: 2
DS100 DATA SILO: RNCC: 5 | RNVC: 9

14 Jan 2005

5975-01-526-8453
Guide Rail

015268453
G1-59-6000-800: RNCC: 3 | RNVC: 2

10 Jan 2005

5975-01-527-2605
Electrical-Electronic Equipment Chassis

015272605
37275-99A: RNCC: 3 | RNVC: 2

26 Jan 2005

5975-01-352-4993
Electrical-Electronic Equipment Chassis

013524993
67-03867-001: RNCC: 3 | RNVC: 2

27 Jan 1992

5975-01-318-8754
Junction Box

013188754
981AS600-1: RNCC: 3 | RNVC: 2

27 Apr 1990

5975-01-522-4988
Cable Marker Sleeve

015224988
SS7074-3799: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-300-8520
Electronic Junction Rack

013008520
MRTB-13: RNCC: 3 | RNVC: 2

19 May 1989

5975-01-316-4319
Electrical-Electronic Equipment Panel

013164319
330024: RNCC: 3 | RNVC: 9
330024: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-00-761-0206
Bushing

007610206
271622-41: RNCC: 3 | RNVC: 2
271622-41: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-775-2455
Contact Assembly

007752455
9101953: RNCC: 3 | RNVC: 2
R30815T: RNCC: 5 | RNVC: 9
352197: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-296-1301
Junction Box

002961301
9000S6202-74013: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-296-0712
Electrical Conduit Wye

002960712
148-1-0250: RNCC: 3 | RNVC: 2
148-1-0250: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-123-3494
Junction Box Cover

001233494
5116732-3: RNCC: 3 | RNVC: 2
5116732-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-589-4705
Electrical Equipment Mounting Base

015894705
M103035-101: RNCC: 3 | RNVC: 2
M103035-101: RNCC: 3 | RNVC: 9

27 Oct 2010

5975-01-588-3389
Junction Box Terminal

015883389
22-42036: RNCC: 3 | RNVC: 2

13 Sep 2010

5975-01-350-9017
Electrical Equipment Cabinet

013509017
3661851-1: RNCC: 3 | RNVC: 2

25 Dec 1991

5975-01-314-8172
Electrical Equipment Rack

013148172
C200H-BC051: RNCC: 3 | RNVC: 2

6 Feb 1990

5975-01-316-8337
Electrical-Electronic Equipment Chassis

013168337
4007780-0501: RNCC: 3 | RNVC: 2

16 Mar 1990

5975-01-303-6751
Electrical Components Tie Down Strap

013036751
696-40527-5-4: RNCC: 3 | RNVC: 2
696-40527-5-4-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-301-6716
Electrical Components Tie Down Strap

013016716
MLT4S-CP316: RNCC: 3 | RNVC: 2
VMUAS-00000540: RNCC: 5 | RNVC: 2
MLT45-316: RNCC: 5 | RNVC: 9

2 Jun 1989

5975-00-760-4699
Electrical Equipment Mounting Base

007604699
8070000236: RNCC: 3 | RNVC: 9

20 Oct 1969

5975-00-122-1553
Flexible Metal Conduit Assembly

001221553
5114173-39: RNCC: 3 | RNVC: 2
5114173-39: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-734-6243
Electrical Equipment Cabinet

007346243
188400-802: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-585-6404
Ground Rod

015856404
A84: RNCC: 3 | RNVC: 2

1 Jun 2010

5975-01-585-9557
Electrical Equipment Rack

015859557
594-2535-01: RNCC: 3 | RNVC: 2

14 Jun 2010

5975-01-586-9712
Electrical Equipment Rack

015869712
5HU50400-121: RNCC: 3 | RNVC: 2

20 Jul 2010

5975-01-586-6775
Electrical Cable Protector

015866775
BFTNY200-50FT: RNCC: 3 | RNVC: 9
A290801000006: RNCC: 5 | RNVC: 2

9 Jul 2010

5975-01-587-0505
Junction Box

015870505
40251-01: RNCC: 3 | RNVC: 2

21 Jul 2010

5975-01-587-8917
Electrical Equipment Mounting Base

015878917
ES122255-123: RNCC: 3 | RNVC: 2

24 Aug 2010

5975-01-347-0309
Electrical-Electronic Equipment Chassis

013470309
77D613139-6: RNCC: 3 | RNVC: 9

13 Oct 1991

5975-01-345-7905
Electrical Conduit Adapter

013457905
C200AC1609AA/18: RNCC: 3 | RNVC: 2
PS183415-20: RNCC: 5 | RNVC: 2

24 Sep 1991

5975-01-347-3360
Interconnecting Box

013473360
68D230024-1003: RNCC: 3 | RNVC: 2

19 Oct 1991

5975-01-345-2182
Conne Adapter Plate

013452182
151466/18: RNCC: 3 | RNVC: 2

14 Sep 1991

5975-01-347-7891
Interconnecting Box

013477891
978443-103: RNCC: 3 | RNVC: 2

29 Oct 1991

5975-01-348-1095
Electrical-Electronic Equipment Panel

013481095
938A104208-00: RNCC: 3 | RNVC: 2

4 Nov 1991

5975-01-348-3353
Electrical Conduit Elbow

013483353
10-40695-151: RNCC: 3 | RNVC: 2

8 Nov 1991

5975-01-312-8181
Electrical Equipment Mounting Base

013128181
622-2490-001: RNCC: 3 | RNVC: 2

22 Dec 1989

5975-01-313-6884
Electrical Equipment Cabinet

013136884
CY8606BRC: RNCC: 3 | RNVC: 2

14 Jan 1990

5975-01-313-5055
Electrical-Electronic Equipment Chassis

013135055
70-15734-00: RNCC: 3 | RNVC: 2

10 Jan 1990

5975-01-384-0694
Electrical Cable Support

013840694
0N383111-1: RNCC: 3 | RNVC: 2

8 Dec 1993

5975-01-376-0426
Kit Bail

013760426
267451-5: RNCC: 3 | RNVC: 2
267451-5: RNCC: 5 | RNVC: 9

26 May 1993

5975-01-299-5213
Electrical-Electronic Equipment Chassis

012995213
7152980-27: RNCC: 3 | RNVC: 2

2 May 1989

5975-00-315-3044
Electrical Equipment Rack Base

003153044
10125A: RNCC: 3 | RNVC: 2
25A635: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-0096
Flexible Metal Conduit

002960096
S152-2464: RNCC: 3 | RNVC: 2
C24-2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-4807
Electrical Conduit Coupling Nut

002964807
60-37005-181: RNCC: 3 | RNVC: 2
7525212: RNCC: 5 | RNVC: 2
5975002964807: RNCC: 5 | RNVC: 9
5975002964807: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-01-581-2674
Electrical Equipment Rack

015812674
RX2002-100: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-581-1700
Aircraft Equipment Quick Disconnect Handle

015811700
1423-1035-65: RNCC: 3 | RNVC: 2

7 Jan 2010

5975-01-582-4842
Guide Rail

015824842
779018-01: RNCC: 3 | RNVC: 2

23 Feb 2010

5975-01-582-1565
Electrical-Electronic Equipment Chassis

015821565
3000A: RNCC: 3 | RNVC: 2

9 Feb 2010

5975-01-581-7332
Electrical Equipment Drawer

015817332
KDM 7198: RNCC: 3 | RNVC: 2

27 Jan 2010

5975-01-584-5629
Electrical Equipment Mounting Base

015845629
22-63710: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-342-6045
Cable Marker Sleeve

013426045
651036-137: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6051
Cable Marker Sleeve

013426051
651043-40: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-343-9331
Electrical Equipment Cabinet

013439331
718922-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9932
Cable Spacer

013439932
25765-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9332
Electrical Equipment Cabinet

013439332
966439-101: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9928
Cable Spacer

013439928
25930-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-311-9018
Strain Electrical Conductor Clamp

013119018
151-001936-001: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-310-3349
Electrical Conduit Union

013103349
3223B: RNCC: 3 | RNVC: 2
6L.3113.013.00-336519: RNCC: 5 | RNVC: 2
6L.3113.013.00-A001: RNCC: 5 | RNVC: 2

2 Nov 1989

5975-01-378-7099
Junction Box

013787099
799E657: RNCC: 3 | RNVC: 2

21 Aug 1993

Load More Results