What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 165 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 165 of 176

5975-01-529-3586
Electrical-Electronic Equipment Panel

015293586
17G121594-5: RNCC: 3 | RNVC: 2

13 Apr 2005

5975-00-328-7836
Electrical Wi Clamp

003287836
5C8-13: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-366-5463
Electrical Equipment Mounting Base

013665463
4005088-0505: RNCC: 3 | RNVC: 2

28 Oct 1992

5975-01-534-2773
Electrical Equipment Mounting Base

015342773
407731: RNCC: 3 | RNVC: 2
8045809Q00: RNCC: 5 | RNVC: 2

14 Oct 2005

5975-01-535-3295
Metallic Raceway Assembly

015353295
0002-6744-301: RNCC: 3 | RNVC: 2

23 Nov 2005

5975-01-535-0599
Electrical-Electronic Equipment Chassis

015350599
11477046-002: RNCC: 3 | RNVC: 2

14 Nov 2005

5975-01-534-5459
Test Hood Assy

015345459
LA-RG967-500R: RNCC: 3 | RNVC: 2

25 Oct 2005

5975-01-535-1616
Strain Electrical Conductor Clamp

015351616
9080 GH10: RNCC: 3 | RNVC: 2
106813804: RNCC: C | RNVC: 1

17 Nov 2005

5975-01-534-6643
Electrical Nonmetallic Conduit Assembly

015346643
78551-2: RNCC: 3 | RNVC: 2

28 Oct 2005

5975-01-536-1800
Flexible Metal Conduit Assembly

015361800
227709-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-534-7566
Electrical-Electronic Equipment Chassis

015347566
11467083: RNCC: 3 | RNVC: 2

1 Nov 2005

5975-01-535-3953
Cable Marker Sleeve

015353953
M235A774-158: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-052-7418
Banjo Fitting

010527418
52535-4-4: RNCC: 3 | RNVC: 2

20 Dec 1977

5975-01-060-2562
Cable Marker Sleeve

010602562
ST650713A19P35: RNCC: 3 | RNVC: 2

18 May 1978

5975-01-059-0855
Housing Cover

010590855
137017: RNCC: 3 | RNVC: 2

6 Apr 1978

5975-01-122-6671
Electrical Equipment Mounting Base

011226671
622-5420-001: RNCC: 3 | RNVC: 2

26 Nov 1981

5975-00-828-3505
Tube Locknut

008283505
132-0001-00: RNCC: 3 | RNVC: 2

28 Aug 1967

5975-01-308-8043
Interconnecting Box

013088043
A34U11410-1: RNCC: 3 | RNVC: 2
J-4179: RNCC: 5 | RNVC: 1

5 Oct 1989

5975-01-532-2108
Electrical Equipment Rack

015322108
002100-0102: RNCC: 3 | RNVC: 2

2 Aug 2005

5975-01-055-9756
Electrical Conductor Bushing

010559756
620-1645: RNCC: 3 | RNVC: 9

15 Feb 1978

5975-01-307-6992
Electrical-Electronic Equipment Panel

013076992
EC-10442-1: RNCC: 3 | RNVC: 2

16 Sep 1989

5975-01-531-3452
Flexible Metal Conduit Assembly

015313452
1563889-779: RNCC: 3 | RNVC: 2

5 Jul 2005

5975-01-135-3027
Electrical Conduit Bushing

011353027
5902946-1: RNCC: 1 | RNVC: 2
FIT SEAL-A: RNCC: 3 | RNVC: 2

21 Jul 1982

5975-00-886-8155
Spacing Strip

008868155
SMC288943-2LESSHAND: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-305-2363
Electrical-Electronic Equipment Panel

013052363
DQ696: RNCC: 3 | RNVC: 9
9159/9205: RNCC: 5 | RNVC: 2

2 Aug 1989

5975-01-529-6973
Electrical-Electronic Equipment Panel

015296973
3359599-3: RNCC: 3 | RNVC: 2

27 Apr 2005

5975-01-529-7455
Electrical-Electronic Equipment Chassis

015297455
IPC-615BP-30ZB: RNCC: 3 | RNVC: 2
IPC-615BP-30XB: RNCC: 5 | RNVC: 9

28 Apr 2005

5975-01-530-2259
Electrical Equipment Rack

015302259
502003: RNCC: 3 | RNVC: 2

18 May 2005

5975-00-502-9806
Electrical Wall Plate

005029806
3394: RNCC: 3 | RNVC: 2

9 Jul 1974

5975-00-503-3454
Electrical Equipment Rack

005033454
SCD63464: RNCC: 3 | RNVC: 2
GS55133: RNCC: 5 | RNVC: 9
GS55133: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-503-3499
Electrical Components Tie Down Strap

005033499
TY1435M: RNCC: 3 | RNVC: 2
TY1435M: RNCC: 5 | RNVC: 2
242201500719: RNCC: 5 | RNVC: 2
TY1435M: RNCC: 5 | RNVC: 9
TY1435M: RNCC: 5 | RNVC: 9
TY1435M: RNCC: C | RNVC: 1

13 Jul 1974

5975-00-982-6877
Blank Panel

009826877
LS4174A6: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-303-6767
Electrical Components Tie Down Strap

013036767
696-40527-8-9: RNCC: 3 | RNVC: 2
696-40527-8-9-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-303-6760
Electrical Components Tie Down Strap

013036760
696-40527-3-2: RNCC: 3 | RNVC: 2
696-40527-3-2-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-527-2406
Junction Box

015272406
C99A50700-1: RNCC: 3 | RNVC: 9
C99A50700-1: RNCC: C | RNVC: 1

25 Jan 2005

5975-01-527-5692
Flexible Metal Conduit Assembly

015275692
363844-4: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-300-7559
Electrical-Electronic Equipment Panel

013007559
G049A001: RNCC: 3 | RNVC: 2
G049A001: RNCC: 3 | RNVC: 9
43131-750-00-2: RNCC: 5 | RNVC: 2
43131-750-00-2: RNCC: 5 | RNVC: 9

18 May 1989

5975-00-989-0144
Electrical Equipment Cabinet

009890144
SF50: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-985-6294
Electrical Cable Tray

009856294
6A12030: RNCC: 3 | RNVC: 2

14 May 1972

5975-01-128-0786
Hs Pin Bd

011280786
625-0432: RNCC: 3 | RNVC: 2

11 Mar 1982

5975-00-846-7539
Chassis Base

008467539
666138-150: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-299-8944
Electrical Conductor Bushing

012998944
1161612-1: RNCC: 3 | RNVC: 9
1161612-1: RNCC: C | RNVC: 1

7 May 1989

5975-01-614-0272
Electrical Equipment Rack

016140272
TR4V6015-7035B: RNCC: 3 | RNVC: 2

24 Nov 2012

5975-01-614-6122
Electrical-Electronic Equipment Chassis

016146122
BS-2000-055-901: RNCC: 3 | RNVC: 2
BS-2000-055-901D: RNCC: D | RNVC: 9

10 Dec 2012

5975-01-614-8455
Cord Grip

016148455
8317K412: RNCC: 3 | RNVC: 2

17 Dec 2012

5975-01-612-7363
Electrical Equipment Mounting Base

016127363
RAM-316-1-324-6U: RNCC: 3 | RNVC: 2
T24-SCC-TBL-MOUNT: RNCC: 5 | RNVC: 2

19 Oct 2012

5975-01-151-9090
Electrical Cable Support

011519090
616-4512-001: RNCC: 3 | RNVC: 2
616-4512-001: RNCC: 5 | RNVC: 2

23 Apr 1983

5975-01-337-7158
Electrical Equipment Rack

013377158
15200: RNCC: 3 | RNVC: 2

21 Apr 1991

5975-01-338-8422
Electrical Equipment Leg Section

013388422
SMC752649: RNCC: 3 | RNVC: 2

12 May 1991

5975-01-297-7125
Flexible Nonmetallic Conduit

012977125
85874-10: RNCC: 3 | RNVC: 2
FG-545-100-N335: RNCC: 5 | RNVC: 2

6 Apr 1989

5975-01-362-3266
Elect Shelf Channel

013623266
036M008-002: RNCC: 3 | RNVC: 9

5 Aug 1992

5975-01-327-2316
Electrical Equipment Mounting Base

013272316
628-6561-002: RNCC: 3 | RNVC: 2

10 Oct 1990

5975-01-611-2356
Flexible Metal Conduit

016112356
MIL-PRF-24758-G: RNCC: 3 | RNVC: 9
M24758-G: RNCC: C | RNVC: 1

10 Sep 2012

5975-01-005-8772
Interconnecting Cabinet

010058772
7423260-50: RNCC: 3 | RNVC: 2
7423260-50: RNCC: 5 | RNVC: 9

6 Jul 1975

5975-01-132-6430
Electrical Equipment Mounting Base

011326430
464073-139: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-01-608-8393
Electrical Conduit Ferrule-Nut Coupling

016088393
712-188A 56: RNCC: 3 | RNVC: 9

13 Jul 2012

5975-00-705-6645
Electrical Conduit Coupling Nut

007056645
7056645: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-281-9556
Junction Box Assembly

012819556
5520749: RNCC: 3 | RNVC: 2

5 Jul 1988

5975-01-607-5782
Metallic Raceway Assembly

016075782
1234606-1: RNCC: 3 | RNVC: 2
1234606-1: RNCC: 3 | RNVC: 9

8 Jun 2012

5975-01-606-7871
Electrical Equipment Rack

016067871
17P1E1590-505: RNCC: 3 | RNVC: 2

23 May 2012

5975-01-607-3857
Electrical Equipment Cabinet

016073857
S4-CHASSIS-POE4: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-608-1402
Electrical Components Tie Down Strap

016081402
PLT5S-0: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-00-759-8353
Clenching Rim Clamp

007598353
7598353: RNCC: 3 | RNVC: 2
7598353: RNCC: 5 | RNVC: 2
BA83745: RNCC: 5 | RNVC: 9
BA83745: RNCC: 5 | RNVC: 9
BA83745: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-003-8080
Disk Pak Brush

010038080
93008-001: RNCC: 3 | RNVC: 9

11 May 1975

5975-01-604-6847
Chassis Base

016046847
SMS002988: RNCC: 3 | RNVC: 2
MA331354OX2815: RNCC: 5 | RNVC: 2
D-3773 REV C ITEM 10: RNCC: 5 | RNVC: 2

11 Apr 2012

5975-01-605-2229
Electrical Equipment Mounting Base

016052229
12055-2021-01: RNCC: 3 | RNVC: 2

17 Apr 2012

5975-01-605-5994
Cable Marker Sleeve

016055994
TMS-SCE-3/8-2.0-S2-4: RNCC: 3 | RNVC: 2
TMS-SCE-3/8-2.0-S2-4: RNCC: 5 | RNVC: 9

23 Apr 2012

5975-01-606-8830
Stuffing Tube

016068830
1468960-1: RNCC: 3 | RNVC: 2

25 May 2012

5975-00-703-5237
Cable Marker Sleeve

007035237
G1027035237: RNCC: 3 | RNVC: 2
A310930B: RNCC: 3 | RNVC: 2
7035237: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-072-3168
Electrical-Electronic Equipment Chassis

010723168
2836963-1: RNCC: 3 | RNVC: 2

28 Feb 1979

5975-01-073-8611
Electrical Cable Nipple

010738611
F11400: RNCC: 3 | RNVC: 2
3558039: RNCC: 5 | RNVC: 2
3198-8509-00: RNCC: 5 | RNVC: 2
3198-8509-00: RNCC: 5 | RNVC: 9
3558039: RNCC: 5 | RNVC: 9

22 Mar 1979

5975-01-134-1416
Insulator

011341416
I,F 489: RNCC: 3 | RNVC: 2

28 Jun 1982

5975-01-603-7456
Junction Box

016037456
147-G-102-XMS-0004: RNCC: 3 | RNVC: 2
147-102-0004: RNCC: 7 | RNVC: 2

14 Mar 2012

5975-01-316-4321
Electrical-Electronic Equipment Panel

013164321
230141-21-1: RNCC: 3 | RNVC: 9
230141-21-1: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-00-729-8609
Cable Spacer

007298609
9028412: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-853-3978
Electrical Conductor Bushing

008533978
PEML2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-359-6069
Insulator Bracket Strap

013596069
77C714398P009: RNCC: 3 | RNVC: 2

10 Jun 1992

5975-01-360-6173
Electrical Equipment Cabinet

013606173
3650036-1: RNCC: 3 | RNVC: 2

28 Jun 1992

5975-01-601-3386
Electrical Equipment Rack

016013386
T2U-SR-02: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-4609
Line Supporting Strap

016014609
60009-202: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-4198
Electrical-Electronic Equipment Chassis

016014198
PL7010: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-00-872-7532
Electrical Equipment Mounting Base

008727532
522-4306-001: RNCC: 3 | RNVC: 2
MT-3322/ARC-109: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-857-5464
Electrical Conduit Adapter

008575464
526867-1: RNCC: 3 | RNVC: 2

29 Apr 1972

5975-00-845-8372
Electrical Box Connector

008458372
CGB6913: RNCC: 3 | RNVC: 2
8528516: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-497-8153
Electrical-Electronic Equipment Chassis

014978153
H200A171-05: RNCC: 3 | RNVC: 2

5 Jun 2002

5975-01-498-2089
Electronic Equipment Mounting Tray

014982089
13214707: RNCC: 3 | RNVC: 2

19 Jun 2002

5975-01-498-7196
Rigid Metal Conduit Assembly

014987196
5HB71102-277: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-6593
Rigid Metal Conduit Assembly

014986593
5HB71101-203: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-349-7243
Electrical Equipment Cabinet

013497243
361D540G01: RNCC: 3 | RNVC: 2

3 Dec 1991

5975-01-657-7155
Electrical Cable Protector

016577155
5CM0000008983: RNCC: 3 | RNVC: 2

26 Aug 2016

5975-01-658-2278
Electrical Equipment Rack

016582278
1199106: RNCC: 3 | RNVC: 2

19 Sep 2016

5975-01-600-3328
Electrical-Electronic Equipment Chassis

016003328
0761345-09188-6: RNCC: 3 | RNVC: 2

23 Nov 2011

5975-01-657-9277
Electrical Equipment Rack

016579277
79-D1-1018: RNCC: 3 | RNVC: 2

6 Sep 2016

5975-01-657-9571
Mounting Plate

016579571
39278-40125-1: RNCC: 3 | RNVC: 2

7 Sep 2016

5975-01-086-6652
Electrical Components Tie Down Strap

010866652
10S300-2-92: RNCC: 3 | RNVC: 9
10S300-2-92: RNCC: C | RNVC: 1

1 Dec 1979

5975-01-093-8764
Electrical Grounding Plate

010938764
2000440-1: RNCC: 3 | RNVC: 2

25 Apr 1980

5975-00-912-2240
Electrical Equipment Mounting Base

009122240
88245: RNCC: 3 | RNVC: 2
MT-3791/ARC-134: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-683-5348
Flexible Metal Conduit Assembly

006835348
8B745024-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-497-0445
Electrical Cable Nipple

014970445
3145815: RNCC: 3 | RNVC: 2

7 May 2002

5975-01-656-8872
Electrical Equipment Rack

016568872
279412-01: RNCC: 3 | RNVC: 2

21 Jul 2016

5975-00-869-0686
Blank Panel

008690686
9190398: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-772-8002
Electrical-Electronic Equipment Chassis

007728002
311D503G4: RNCC: 3 | RNVC: 2
311D503G4: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-797-2890
Electrical Equipment Rack

007972890
CE186992-4: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-495-8417
Electrical-Electronic Equipment Chassis

014958417
546-6548-003: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-655-2267
Electrical-Electronic Equipment Panel

016552267
25-8DC165-4: RNCC: 3 | RNVC: 2
25-8DC165-4: RNCC: 3 | RNVC: 9

23 May 2016

5975-01-655-2358
Junction Box Extension

016552358
25-8FC357-5A: RNCC: 3 | RNVC: 2

23 May 2016

5975-01-655-8196
Flexible Nonmetallic Conduit

016558196
21-854-10: RNCC: 3 | RNVC: 2

8 Jun 2016

5975-00-869-0688
Blank Panel

008690688
9178599: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-655-0276
Cable Terminal Chamber

016550276
NBF-32326: RNCC: 3 | RNVC: 2

17 May 2016

5975-00-591-1995
Electrical Box Connector

005911995
B775-146: RNCC: 3 | RNVC: 2
8247-13-12: RNCC: 3 | RNVC: 2
B775-146: RNCC: 5 | RNVC: 2
31-831: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-491-6813
Electrical-Electronic Equipment Chassis

014916813
35854: RNCC: 3 | RNVC: 2

29 Oct 2001

5975-01-492-3593
Electrical Equipment Shelf

014923593
2200070-201: RNCC: 3 | RNVC: 2
CC6920-00-0280: RNCC: 3 | RNVC: 2
2200070: RNCC: D | RNVC: 9

26 Nov 2001

5975-01-492-7909
Blank Panel

014927909
2100062-101: RNCC: 3 | RNVC: 2
2100009-102: RNCC: 5 | RNVC: 9

12 Dec 2001

5975-01-492-7696
Blank Panel

014927696
2310030-301: RNCC: 3 | RNVC: 2
2310010-301: RNCC: 5 | RNVC: 9

12 Dec 2001

5975-01-492-7035
Electrical-Electronic Equipment Chassis

014927035
RPC-500N-MX-30X: RNCC: 3 | RNVC: 2

10 Dec 2001

5975-01-652-8244
Junction Box

016528244
13552345-520: RNCC: 3 | RNVC: 2

4 Mar 2016

5975-01-652-2662
Electrical-Electronic Equipment Panel

016522662
CB19459-002: RNCC: 3 | RNVC: 2

16 Feb 2016

5975-01-652-1153
Electrical Wall Plate

016521153
UIT70FV4IW: RNCC: 3 | RNVC: 2

10 Feb 2016

5975-01-653-0069
Junction Box Assembly

016530069
328-302019-001: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-652-5499
Electrical Components Tie Down Strap

016525499
22343166: RNCC: 3 | RNVC: 2
22343166: RNCC: 3 | RNVC: 9

26 Feb 2016

5975-00-644-2603
Electrical Conduit Elbow

006442603
LBD3300: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-646-5299
Electrical Equipment Rack

006465299
MT893GPN: RNCC: 3 | RNVC: 2
41730: RNCC: 5 | RNVC: 2

1 Nov 1967

5975-00-770-5634
Internal Corner Coupling

007705634
151-92-1: RNCC: 3 | RNVC: 2
151-92-1: RNCC: 5 | RNVC: 9
3017TC: RNCC: 5 | RNVC: 9
3017TCP2: RNCC: 5 | RNVC: 9
3017TCP1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-649-9630
Reduction Sleeve

016499630
259-021Z3A-4-12: RNCC: 3 | RNVC: 2

17 Nov 2015

5975-01-649-5762
Electrical-Electronic Equipment Panel

016495762
284A1816-4: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-649-9700
Blank Panel

016499700
JPM375A: RNCC: 3 | RNVC: 9

17 Nov 2015

5975-01-650-6025
Junction Box

016506025
H456942-1: RNCC: 3 | RNVC: 2

11 Dec 2015

5975-00-513-2277
Flexible Metal Conduit

005132277
BC1-0750: RNCC: 3 | RNVC: 2
BC1-0750: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-489-1245
Electrical Equipment Rack

014891245
5HK01352-107: RNCC: 3 | RNVC: 2

12 Sep 2001

5975-01-646-9409
Electrical Tie Down Mounting Base

016469409
PLT31-C: RNCC: 3 | RNVC: 2

5 Aug 2015

5975-01-647-4942
Blank Panel

016474942
304A023-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-647-4872
Interior Cable Rack

016474872
CF 54/100 EZ: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-647-7449
Conduit Outlet

016477449
637-058B2: RNCC: 3 | RNVC: 2

31 Aug 2015

5975-01-647-9299
Cable Reinforcing Link

016479299
69-76556-1: RNCC: 3 | RNVC: 2

8 Sep 2015

5975-01-647-9887
Cable Reinforcing Link

016479887
25-8UN283-1A: RNCC: 3 | RNVC: 2
25-8UN283-1A: RNCC: 3 | RNVC: 9

10 Sep 2015

5975-01-648-7700
Electrical Equipment Shelf

016487700
284A1741-140: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-648-7365
Electrical Equipment Shelf

016487365
284A3700-42: RNCC: 3 | RNVC: 2

5 Oct 2015

5975-01-648-8363
Junction Box Extension

016488363
284A3223-7: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-648-2225
Wire Strand Hanger Safety Strap

016482225
DHS1693B3BS: RNCC: 3 | RNVC: 2
DHS1693B3BS: RNCC: 3 | RNVC: 9

18 Sep 2015

5975-01-648-6195
Adaptor-Landing Gea

016486195
25SF1585: RNCC: 3 | RNVC: 2
25SF1585: RNCC: 3 | RNVC: 9

30 Sep 2015

5975-01-648-0652
Electrical-Electronic Equipment Chassis

016480652
10535-3010-15: RNCC: 3 | RNVC: 2

14 Sep 2015

5975-00-443-3427
Electrical-Electronic Equipment Chassis

004433427
WG21B4: RNCC: 3 | RNVC: 9

3 Apr 1969

5975-01-486-8425
Rigid Metal Conduit Assembly

014868425
3226027-3: RNCC: 3 | RNVC: 2

17 Jul 2001

5975-01-486-2843
Electrical Box Connector

014862843
712AS116A2232C3: RNCC: 3 | RNVC: 2
712-116: RNCC: D | RNVC: 9

25 Jun 2001

5975-01-486-9055
Electrical-Electronic Equipment Panel

014869055
504362: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-486-8926
Electrical-Electronic Equipment Panel

014868926
23010-1: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-486-2192
Electrical Equipment Mounting Base

014862192
775-4355-001: RNCC: 3 | RNVC: 2

21 Jun 2001

5975-01-487-1430
Junction Box

014871430
140-016-0003-GPC: RNCC: 3 | RNVC: 9
140-016-0003-GPC: RNCC: 5 | RNVC: 2

25 Jul 2001

5975-01-487-7747
Cable Hanger

014877747
CL-18-SKR: RNCC: 3 | RNVC: 2
8174-1: RNCC: 7 | RNVC: 2

16 Aug 2001

5975-01-487-6417
Electrical Equipment Mounting Base

014876417
822-1511-001: RNCC: 3 | RNVC: 2
MT-5327/ARC-512A(V): RNCC: 5 | RNVC: 2

13 Aug 2001

5975-01-644-4656
Electrical-Electronic Equipment Chassis

016444656
19-1004321: RNCC: 3 | RNVC: 2

6 May 2015

5975-01-645-6709
Blank Panel

016456709
70205-25009-102: RNCC: 3 | RNVC: 2

24 Jun 2015

5975-01-647-3297
Electrical-Electronic Equipment Panel

016473297
9D02746-1: RNCC: 3 | RNVC: 2

18 Aug 2015

5975-01-038-2914
Cable Marker Sleeve

010382914
BA10144-71: RNCC: 3 | RNVC: 2

3 Apr 1977

5975-01-043-0782
Cable Marker Sleeve

010430782
65550-01101-109: RNCC: 3 | RNVC: 2
65550-01101-109: RNCC: 8 | RNVC: 2

19 Jun 1977

5975-00-706-2938
Electrical-Electronic Equipment Chassis

007062938
733432: RNCC: 3 | RNVC: 2
733432: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-501-0561
Flexible Metal Conduit Assembly

005010561
4394793-514: RNCC: 3 | RNVC: 2
4394793-514: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-501-0565
Flexible Metal Conduit Assembly

005010565
4394793-516: RNCC: 3 | RNVC: 2
C175-0250-2208-5757: RNCC: 5 | RNVC: 2
4394793-516: RNCC: 5 | RNVC: 9
C175-0250-2208-5757: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-966-2523
Molded Rub Junction

009662523
1603668: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-960-2571
Conduit Outlet Cover

009602571
480: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-148-3102
Electrical Equipment Mounting Base

011483102
810448-802: RNCC: 3 | RNVC: 2
660188-801: RNCC: 5 | RNVC: 2

3 Mar 1983

5975-01-513-4176
Electronic Equipment Mounting Tray

015134176
770053: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-511-9507
Blank Panel

015119507
17G691592-501: RNCC: 3 | RNVC: 2

19 Aug 2003

5975-01-511-8577
Electrical-Electronic Equipment Chassis

015118577
652-3125-052: RNCC: 3 | RNVC: 2

18 Aug 2003

5975-01-642-2457
Electrical Equipment Mounting Base

016422457
733668-B21: RNCC: 3 | RNVC: 2

19 Feb 2015

5975-01-642-4797
Cable Reinforcing Link

016424797
25FC7503A: RNCC: 3 | RNVC: 2
25FC7503A: RNCC: 3 | RNVC: 9

26 Feb 2015

5975-01-033-0896
Electrical-Electronic Equipment Chassis

010330896
G354622-8: RNCC: 3 | RNVC: 2
G354622-8: RNCC: 3 | RNVC: 9

28 Dec 1976

5975-01-033-3679
Electrical Equipment Mounting Base

010333679
522-3511-004: RNCC: 3 | RNVC: 2

5 Jan 1977

5975-01-011-5251
Slide Telescopic

010115251
150737R: RNCC: 3 | RNVC: 2
7903159-01: RNCC: 5 | RNVC: 2

23 Oct 1975

5975-01-291-8206
Junction Box

012918206
802-S1/4: RNCC: 3 | RNVC: 2

6 Jan 1989

5975-01-292-8803
Electrical-Electronic Equipment Chassis

012928803
609-2555-001: RNCC: 3 | RNVC: 2

23 Jan 1989

5975-01-141-6842
Cable Marker Sleeve

011416842
TMS-SCE-3/4-2.0-S1-9: RNCC: 3 | RNVC: 1
ECS6036HN9: RNCC: 5 | RNVC: 2
215511T107: RNCC: 5 | RNVC: 2
RNF-100-3/4X1 1/4 WHITE: RNCC: 5 | RNVC: 9
215511T107: RNCC: 7 | RNVC: 2

3 Nov 1982

5975-01-509-7865
Electrical Components Tie Down Strap

015097865
TY24M-2: RNCC: 3 | RNVC: 2

2 Jul 2003

5975-01-509-8472
Blank Panel

015098472
45388-1: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-511-0984
Electrical Equipment Mounting Base

015110984
522-4099-002: RNCC: 3 | RNVC: 2

1 Aug 2003

5975-01-640-9249
Cable Spacer

016409249
369D25631: RNCC: 3 | RNVC: 2

2 Jan 2015

5975-01-640-9937
Electrical Equipment Cabinet

016409937
AR4038A: RNCC: 3 | RNVC: 2
NETSHELTER CX 38U: RNCC: 5 | RNVC: 2

6 Jan 2015

5975-01-641-8312
Electrical-Electronic Equipment Chassis

016418312
112ASM0034: RNCC: 3 | RNVC: 2

4 Feb 2015

5975-01-641-0835
Stuffing Tube

016410835
737DM7M65: RNCC: 3 | RNVC: 2

8 Jan 2015

5975-01-027-5954
Electronic Junction Rack

010275954
JF13E-01-14: RNCC: 3 | RNVC: 2

19 Sep 1976

5975-00-602-6679
Flexible Metal Conduit

006026679
151-0750: RNCC: 3 | RNVC: 2
151-0750: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-141-0079
Tube Assembly

011410079
619-6024-001: RNCC: 3 | RNVC: 2

22 Oct 1982

5975-01-507-0732
Interconnecting Box

015070732
NH15556: RNCC: 3 | RNVC: 2
KC84358-001: RNCC: 7 | RNVC: 2

17 Apr 2003

5975-01-508-4987
Electrical-Electronic Equipment Panel

015084987
910149-5: RNCC: 3 | RNVC: 2

22 May 2003

5975-01-508-2441
Electrical Conduit Adapter

015082441
7012-4213: RNCC: 3 | RNVC: 2
S2G3255: RNCC: 5 | RNVC: 2

15 May 2003

5975-00-450-8975
Electrical Conductor Bushing

004508975
PEML16: RNCC: 3 | RNVC: 2

26 Dec 1969

5975-01-041-1776
Base And Clamp Assy

010411776
LP5A1BA2: RNCC: 3 | RNVC: 2

21 May 1977

5975-00-608-1021
Electrical Conduit Ferrule

006081021
C1077B: RNCC: 3 | RNVC: 2
60034-5: RNCC: 3 | RNVC: 2
C1077B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-608-1186
Electrical Equipment Mounting Base

006081186
0999160001: RNCC: 3 | RNVC: 2
99916: RNCC: 5 | RNVC: 9

25 Jan 1975

5975-01-506-1446
Junction Box

015061446
G732697-1: RNCC: 3 | RNVC: 2

24 Mar 2003

5975-01-008-0292
Electrical-Electronic Equipment Chassis

010080292
G354989: RNCC: 3 | RNVC: 9
G354989: RNCC: 5 | RNVC: 9
G354989: RNCC: C | RNVC: 1

15 Aug 1975

5975-01-505-3150
Electrical Equipment Rack

015053150
8861710: RNCC: 3 | RNVC: 2

3 Mar 2003

5975-01-505-2441
Cable Shield Adapter

015052441
SEEPA-SPN75-ASM-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-505-1771
Electrical-Electronic Equipment Chassis

015051771
12019-3010-01: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-505-6076
Electronic Equipment Mounting Tray

015056076
KC33051-003: RNCC: 3 | RNVC: 2

11 Mar 2003

5975-00-534-3536
Cable Marker Sleeve

005343536
5343536: RNCC: 3 | RNVC: 2
5343536: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-982-7070
Blank Panel

009827070
LS4174-6: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-266-2860
Flexible Nonmetallic Conduit

012662860
162989-001: RNCC: 3 | RNVC: 2

23 Oct 1987

5975-01-266-2859
Flexible Nonmetallic Conduit

012662859
162989-020: RNCC: 3 | RNVC: 2

23 Oct 1987

5975-01-133-5128
Bushing

011335128
925417: RNCC: 3 | RNVC: 2

16 Jun 1982

5975-01-132-6172
Wire Marker Book

011326172
PCMB-13: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-01-436-3485
Electronic Equipment Mounting Tray

014363485
3350863-3: RNCC: 3 | RNVC: 2

17 Sep 1996

5975-01-436-5086
Electrical-Electronic Equipment Chassis

014365086
13217728: RNCC: 3 | RNVC: 2

20 Sep 1996

5975-01-503-1204
Blank Panel

015031204
600B45922A: RNCC: 3 | RNVC: 2

4 Dec 2002

5975-01-503-4604
Electronic Equipment Mounting Tray

015034604
DM-SM-0300: RNCC: 3 | RNVC: 2

18 Dec 2002

5975-01-504-2201
Electrical-Electronic Equipment Chassis

015042201
KC31135-059: RNCC: 3 | RNVC: 2

22 Jan 2003

5975-01-633-9399
Electrical Equipment Cabinet

016339399
BW928A: RNCC: 3 | RNVC: 2

10 Dec 2014

5975-00-535-9706
Fanning Strip

005359706
8515393: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-534-3617
Cable Marker Sleeve

005343617
5343617: RNCC: 3 | RNVC: 2
5343617: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-538-5256
Electrical Conduit Coupling Nut

005385256
11035-1B: RNCC: 3 | RNVC: 9
11035-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-3182
Conduit Outlet Cover

006813182
670F: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-677-8908
Base

006778908
8021290: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-055-5160
Electrical Conduit Coupling

010555160
5032: RNCC: 3 | RNVC: 2
1031-S: RNCC: 5 | RNVC: 9
20401: RNCC: 5 | RNVC: 9
714626-2: RNCC: 7 | RNVC: 2

7 Feb 1978

5975-01-475-7901
Interconnecting Box

014757901
1721795-100: RNCC: 3 | RNVC: 2

13 Jun 2000

5975-01-476-5169
Junction Box Assembly

014765169
3357942-1: RNCC: 3 | RNVC: 2

14 Jul 2000

5975-01-479-6355
Electrical Equipment Shelf

014796355
5071A-MP1: RNCC: 3 | RNVC: 2

26 Oct 2000

5975-01-263-9099
Cable Hanger

012639099
7150438-00: RNCC: 3 | RNVC: 2

21 Sep 1987

5975-00-351-4405
Junction Box

003514405
ASD14350: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-177-8577
Electrical Components Tie Down Strap

011778577
TY-635M-8: RNCC: 3 | RNVC: 2
10134332: RNCC: 6 | RNVC: 9

27 Apr 1984

5975-01-434-6243
Electrical Equipment Rack

014346243
3346-0100-001: RNCC: 3 | RNVC: 2

2 Aug 1996

5975-01-434-7977
Flexible Metal Conduit Assembly

014347977
3402121-3: RNCC: 3 | RNVC: 2

7 Aug 1996

5975-00-497-2158
Electrical Components Tie Down Strap

004972158
MS17821-1-9: RNCC: 2 | RNVC: 2
680-505-9001: RNCC: 5 | RNVC: 9

5 Feb 1971

5975-01-471-5861
Electrical Conduit Elbow

014715861
152197: RNCC: 3 | RNVC: 2

7 Feb 2000

5975-01-473-2488
Junction Box Cover

014732488
348450-1: RNCC: 3 | RNVC: 2

31 Mar 2000

5975-01-244-0939
Electrical Wall Plate

012440939
600-A10364-001: RNCC: 3 | RNVC: 2

7 Nov 1986

5975-00-355-6019
Cable Marker Sleeve

003556019
446712-12: RNCC: 3 | RNVC: 2

6 Feb 1974

5975-01-434-3154
Electronic Equipment Mounting Tray

014343154
M8FM: RNCC: 3 | RNVC: 2

25 Jul 1996

5975-01-434-2023
Electrical Equipment Mounting Base

014342023
071-04043-0000: RNCC: 3 | RNVC: 2

23 Jul 1996

5975-01-631-5360
Electrical Components Tie Down Strap

016315360
3KH13: RNCC: 3 | RNVC: 2

17 Sep 2014

5975-01-632-1447
Electrical-Electronic Equipment Chassis

016321447
775-91198-1: RNCC: 3 | RNVC: 2

8 Oct 2014

5975-00-538-0615
Electrical Equipment Cabinet

005380615
38541-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-538-0624
Electrical Equipment Cabinet

005380624
CY1398AARC34: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-246-6866
Electrical-Electronic Equipment Chassis

012466866
520022-01: RNCC: 3 | RNVC: 2

18 Dec 1986

5975-01-175-3565
Electrical Equipment Cabinet

011753565
0N285576-1: RNCC: 3 | RNVC: 2

30 Mar 1984

5975-01-629-8629
Electrical-Electronic Equipment Chassis

016298629
651-0595-003: RNCC: 3 | RNVC: 2

17 Jul 2014

5975-01-629-8609
Electrical-Electronic Equipment Chassis

016298609
651-0595-009: RNCC: 3 | RNVC: 2

17 Jul 2014

5975-01-629-7890
Electrical-Electronic Equipment Chassis

016297890
QR482A: RNCC: 3 | RNVC: 2
HP 3PAR STORESERV 7200 2-NODE: RNCC: 5 | RNVC: 2

15 Jul 2014

5975-01-630-0251
Electrical Conduit Adapter

016300251
36684-62: RNCC: 3 | RNVC: 2

23 Jul 2014

5975-01-629-8581
Strain Relief

016298581
B2000215: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-631-1472
Electrical Cable Support

016311472
4002700-1: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-00-531-1007
Conduit Chase Nipple

005311007
CN500: RNCC: 3 | RNVC: 2

11 Sep 1974

5975-00-533-4906
Electrical Components Tie Down Strap

005334906
10S300-2-10: RNCC: 3 | RNVC: 9
10S300-2-10: RNCC: C | RNVC: 1

14 Sep 1974

5975-00-534-3610
Cable Marker Sleeve

005343610
5343610: RNCC: 3 | RNVC: 2
5343610: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-807-6124
Interconnecting Box

008076124
7714: RNCC: 3 | RNVC: 2
11210: RNCC: 5 | RNVC: 9
M7215: RNCC: 5 | RNVC: 9
M7215: RNCC: 5 | RNVC: 9
508E635: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-539-5770
Cover

005395770
36C716585AAP1: RNCC: 3 | RNVC: 2

25 Sep 1974

5975-00-534-3596
Cable Marker Sleeve

005343596
5343596: RNCC: 3 | RNVC: 2
5343596: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-534-3590
Cable Marker Sleeve

005343590
5343590: RNCC: 3 | RNVC: 2
5343590: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-372-4292
Electrical Equipment Rack

013724292
16826102-000: RNCC: 3 | RNVC: 2

10 Mar 1993

5975-01-466-4249
Guide Rail

014664249
R266261-01: RNCC: 3 | RNVC: 2

19 Jul 1999

5975-00-605-2956
Electrical Conduit Ferrule

006052956
119-2-0375: RNCC: 3 | RNVC: 2
119-2-0375: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-431-5812
Electrical Equipment Rack

014315812
MT-6382/VRC-94 10012-0830: RNCC: 3 | RNVC: 2

15 May 1996

5975-01-628-3177
Wire Strand Hanger Support And Safety Strap

016283177
EZT 90 KIT/EZ: RNCC: 3 | RNVC: 2

19 May 2014

5975-01-368-6027
Conduit Outlet Cover

013686027
10772323-007: RNCC: 3 | RNVC: 2

4 Dec 1992

5975-01-247-2083
Strain Electrical Conductor Clamp

012472083
G8353-10N: RNCC: 3 | RNVC: 2

29 Dec 1986

5975-01-430-6899
Electronic Equipment Mounting Tray

014306899
40161415: RNCC: 3 | RNVC: 9
40161415: RNCC: C | RNVC: 1

2 May 1996

5975-01-429-8609
Cable Reinforcing Link

014298609
412-001-103-101: RNCC: 3 | RNVC: 2

19 Apr 1996

5975-01-627-7541
Electrical-Electronic Equipment Chassis

016277541
030-000107-000: RNCC: 3 | RNVC: 2
5975PL1584125: RNCC: 6 | RNVC: 9

25 Apr 2014

5975-01-628-2687
Electrical-Electronic Equipment Chassis

016282687
X3109-R6: RNCC: 3 | RNVC: 2

16 May 2014

5975-01-627-3675
Electrical Components Tie Down Strap

016273675
PLT1S-M: RNCC: 3 | RNVC: 2

11 Apr 2014

5975-01-628-2355
Ss Wire Ties

016282355
WT-500S: RNCC: 3 | RNVC: 2

14 May 2014

5975-00-501-6640
Conduit Insert

005016640
436-2X2 3-8: RNCC: 3 | RNVC: 9

6 Jul 1974

5975-01-363-5911
Electrical Tie Down Mounting Base

013635911
5002506: RNCC: 3 | RNVC: 2

1 Sep 1992

5975-01-169-2522
Electrical Components Tie Down Strap

011692522
8424552: RNCC: 3 | RNVC: 9

4 Jan 1984

5975-01-626-3793
Electrical-Electronic Equipment Panel

016263793
734-65463-1: RNCC: 3 | RNVC: 2
734-65463: RNCC: D | RNVC: 9

7 Mar 2014

5975-01-626-3717
Electrical-Electronic Equipment Panel

016263717
734-65220-1: RNCC: 3 | RNVC: 2
734-65220: RNCC: D | RNVC: 9

7 Mar 2014

5975-01-626-4186
Electrical-Electronic Equipment Panel

016264186
734-65219-1: RNCC: 3 | RNVC: 2
734-65219: RNCC: D | RNVC: 9

10 Mar 2014

5975-00-534-3571
Cable Marker Sleeve

005343571
5343571: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-534-3564
Cable Marker Sleeve

005343564
5343564: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-360-7356
Strain Relief Plate

013607356
6902-1796: RNCC: 3 | RNVC: 2

30 Jun 1992

5975-01-358-9926
Electrical Conduit Adapter

013589926
710AS002B1009: RNCC: 3 | RNVC: 2

27 May 1992

5975-01-262-4700
Electrical Tie Down Mounting Base

012624700
A698-33: RNCC: 3 | RNVC: 2

29 Aug 1987

5975-01-624-4914
Electrical-Electronic Equipment Chassis

016244914
P5507-C: RNCC: 3 | RNVC: 2

6 Jan 2014

5975-01-625-0819
Mounting Plate

016250819
68A870386-1003: RNCC: 3 | RNVC: 2

23 Jan 2014

5975-01-625-9315
Electrical-Electronic Equipment Chassis

016259315
CTP2008-AC-02: RNCC: 3 | RNVC: 2
CTP2008-AC-02: RNCC: 5 | RNVC: 2

20 Feb 2014

5975-01-626-1310
Metallic Raceway

016261310
232A1653-2: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-625-4053
Insulator

016254053
68A250225-2019: RNCC: 3 | RNVC: 2

3 Feb 2014

5975-01-625-7953
Nonmetallic Raceway

016257953
M0DREF346868: RNCC: 3 | RNVC: 2

14 Feb 2014

5975-01-425-2694
Electrical Equipment Mounting Base

014252694
16U74305-13: RNCC: 3 | RNVC: 2

15 Feb 1996

5975-01-624-3701
Electrical Equipment Rack

016243701
BW946A: RNCC: 3 | RNVC: 2

27 Dec 2013

5975-01-624-3693
Electrical-Electronic Equipment Chassis

016243693
CTP-150-AC: RNCC: 3 | RNVC: 2
CTP-150-AC: RNCC: 5 | RNVC: 2

27 Dec 2013

5975-01-393-3242
Electrical Equipment Mounting Base

013933242
8010000362-1: RNCC: 3 | RNVC: 9

18 Jul 1994

5975-01-159-5140
Junction Box

011595140
SK83221-1: RNCC: 3 | RNVC: 2

10 Aug 1983

5975-01-422-6214
Casting Mac Chassis

014226214
0N406545-1: RNCC: 3 | RNVC: 2

5 Dec 1995

5975-01-423-7836
Electrical Equipment Cabinet

014237836
TL-18: RNCC: 3 | RNVC: 9

10 Jan 1996

5975-01-422-7678
Conduit Outlet Cover

014227678
7589328G1: RNCC: 3 | RNVC: 2

7 Dec 1995

5975-01-621-8550
Electrical-Electronic Equipment Chassis

016218550
1051391P-2: RNCC: 3 | RNVC: 2
74A-07U-0089: RNCC: 7 | RNVC: 2

19 Sep 2013

5975-01-622-6350
Nonmetallic Raceway Assembly

016226350
WMPFSE: RNCC: 3 | RNVC: 2
L-46B-C-PP-P: RNCC: 5 | RNVC: 2

16 Oct 2013

5975-01-623-5117
Electrical Equipment Cabinet

016235117
572021: RNCC: 3 | RNVC: 2

18 Nov 2013

5975-01-432-6530
Flexible Metal Conduit Assembly

014326530
10250675-52: RNCC: 3 | RNVC: 2
750-011NF12-46: RNCC: 3 | RNVC: 2
200205-D10460: RNCC: 5 | RNVC: 2

11 Jun 1996

5975-01-380-4700
Blank Panel

013804700
227BC503-1: RNCC: 3 | RNVC: 9
227BC503-1: RNCC: 5 | RNVC: 9

20 Sep 1993

5975-01-390-7893
Electrical-Electronic Equipment Panel

013907893
687-4458-004: RNCC: 3 | RNVC: 2

26 May 1994

5975-01-390-7891
Electrical-Electronic Equipment Panel

013907891
687-4458-002: RNCC: 3 | RNVC: 2

26 May 1994

5975-01-621-0999
Electrical Components Tie Down Strap

016210999
PLT4H-C0: RNCC: 3 | RNVC: 2

23 Aug 2013

5975-00-919-9980
Pushbutton

009199980
553-1277-002: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-661-0716
Electrical Conduit Sealing Fitting

006610716
EYS26: RNCC: 3 | RNVC: 2
EYS26: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-373-6234
Electrical-Electronic Equipment Chassis

013736234
8928-110: RNCC: 3 | RNVC: 9
91741010: RNCC: 5 | RNVC: 2
91741010: RNCC: 5 | RNVC: 9

8 Apr 1993

5975-01-280-0266
Electrical-Electronic Equipment Panel

012800266
670505604: RNCC: 3 | RNVC: 2
670-5056-03: RNCC: 5 | RNVC: 9
670-5056-00: RNCC: 5 | RNVC: 9

29 May 1988

5975-01-281-0172
Electrical Equipment Cabinet

012810172
717613380-009: RNCC: 3 | RNVC: 2

16 Jun 1988

5975-01-618-8577
Electrical Components Tie Down Strap

016188577
SG350LH: RNCC: 3 | RNVC: 2
Y00015605: RNCC: 5 | RNVC: 2
0089979490: RNCC: 5 | RNVC: 2
0089979490: RNCC: 5 | RNVC: 9

8 May 2013

5975-01-617-5847
Electrical Cable Nipple

016175847
0-967056-1: RNCC: 3 | RNVC: 2
0025458780: RNCC: 5 | RNVC: 2
0025458780: RNCC: 5 | RNVC: 9

27 Mar 2013

5975-01-619-6306
Electrical-Electronic Equipment Panel

016196306
20-0112-46-051 TEX: RNCC: 3 | RNVC: 2

11 Jun 2013

5975-01-093-8781
Electrical Components Tie Down Strap

010938781
SST8HC0: RNCC: 3 | RNVC: 2

25 Apr 1980

5975-01-275-6889
Electrical-Electronic Equipment Chassis

012756889
4-139003-05: RNCC: 3 | RNVC: 2

25 Mar 1988

5975-01-276-2859
Electrical-Electronic Equipment Chassis

012762859
336573-1: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-278-2829
Junction Box

012782829
4502: RNCC: 3 | RNVC: 9
4502: RNCC: C | RNVC: 1

3 May 1988

5975-00-544-0332
Electrical-Electronic Equipment Chassis

005440332
8031517: RNCC: 3 | RNVC: 2

6 Oct 1974

5975-01-148-4392
Ground Strap

011484392
50001609-004: RNCC: 3 | RNVC: 9

5 Mar 1983

5975-01-151-2962
Junction Box

011512962
25-2308-55: RNCC: 3 | RNVC: 2

16 Apr 1983

5975-01-386-5715
Electrical-Electronic Equipment Chassis

013865715
H200A163-01: RNCC: 3 | RNVC: 2

8 Feb 1994

5975-01-387-0818
Interconnecting Box

013870818
1006186: RNCC: 3 | RNVC: 2
1006186: RNCC: 3 | RNVC: 9

24 Feb 1994

5975-01-503-4516
Electrical Equipment Cabinet

015034516
245161-B21: RNCC: 3 | RNVC: 2
CQ245161-B21: RNCC: 5 | RNVC: 2
245161-B21: RNCC: 5 | RNVC: 2
10642-42U: RNCC: 5 | RNVC: 2

18 Dec 2002

5975-00-923-0698
Electrical Equipment Cabinet

009230698
663R331G01: RNCC: 3 | RNVC: 2
CY6280AAWG10: RNCC: 5 | RNVC: 1

19 Apr 1968

5975-00-950-5830
Junction Box Extension

009505830
59361 3-4: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-301-9440
Electrical Equipment Mounting Base

013019440
522-2823-005: RNCC: 3 | RNVC: 2

6 Jun 1989

5975-01-238-1095
Electrical Equipment Cabinet

012381095
57977-40000-2: RNCC: 3 | RNVC: 2

11 Aug 1986

5975-01-273-0971
Electrical-Electronic Equipment Panel

012730971
1220-1001: RNCC: 3 | RNVC: 2

19 Feb 1988

5975-00-548-8904
Cable Collar

005488904
117-3B0250: RNCC: 3 | RNVC: 2
117-3B0250: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-108-5461
Electrical Equipment Mounting Base

011085461
622-5409-001: RNCC: 3 | RNVC: 2

1 Mar 1981

5975-01-385-1753
Electrical Equipment Mounting Base

013851753
17284-2: RNCC: 3 | RNVC: 9

6 Jan 1994

5975-01-385-8736
Electrical-Electronic Equipment Chassis

013858736
A405A086-94: RNCC: 3 | RNVC: 2

21 Jan 1994

5975-01-385-4829
Electrical-Electronic Equipment Chassis

013854829
K633310045: RNCC: 3 | RNVC: 2

13 Jan 1994

5975-01-610-7732
Electrical-Electronic Equipment Chassis

016107732
JF010A: RNCC: 3 | RNVC: 2

28 Aug 2012

5975-01-561-7095
Junction Box

015617095
42325-708: RNCC: 3 | RNVC: 2

14 Mar 2008

5975-01-451-8739
Electrical Tie Down Mounting Base

014518739
CB4020V3N16: RNCC: 3 | RNVC: 2
9D0271-104: RNCC: 3 | RNVC: 2

7 Jan 1998

5975-01-451-9449
Cable Marker Sleeve

014519449
013-007382-021: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-081-9493
Electrical Box Connector

010819493
HUB10: RNCC: 3 | RNVC: 2

23 Aug 1979

5975-01-319-7755
Junction Box

013197755
54F8F-1: RNCC: 3 | RNVC: 9
54F8F-1/FOUR DSS-3 CABLES: RNCC: 5 | RNVC: 2
54F8F-1: RNCC: 5 | RNVC: 2

15 May 1990

5975-00-494-6825
Conduit Compensator

004946825
G61721-12-4: RNCC: 3 | RNVC: 2

18 Feb 1970

5975-01-383-2829
Electrical-Electronic Equipment Chassis

013832829
227BC508-1: RNCC: 3 | RNVC: 9
227BC508-1: RNCC: 5 | RNVC: 9

19 Nov 1993

5975-01-383-4666
Electrical Cable Nipple

013834666
222S121-25S: RNCC: 3 | RNVC: 2
10567835-1: RNCC: 5 | RNVC: 2
TE30002975-001: RNCC: 7 | RNVC: 2

24 Nov 1993

5975-01-603-7245
Flexible Metal Conduit Assembly

016037245
AE1010344K2480: RNCC: 3 | RNVC: 2

13 Mar 2012

5975-01-447-1659
Electrical Equipment Drawer

014471659
DRFH3-19-25E,CLR81T: RNCC: 3 | RNVC: 2

28 Jul 1997

5975-01-099-9450
Electrical-Electronic Equipment Chassis

010999450
617-8425-001: RNCC: 3 | RNVC: 2
617-8425: RNCC: D | RNVC: 9

27 Aug 1980

5975-01-117-1154
Protective Nut

011171154
10-405979-189: RNCC: 3 | RNVC: 2

9 Aug 1981

5975-01-108-6118
Clamp

011086118
08-0105: RNCC: 3 | RNVC: 2

2 Mar 1981

5975-01-319-4671
Electrical Components Tie Down Strap

013194671
SST2IM0: RNCC: 3 | RNVC: 2

8 May 1990

5975-01-127-5299
Electrical Bracket

011275299
192-54159: RNCC: 3 | RNVC: 2

3 Mar 1982

5975-01-049-7113
Eccentric Plate Ass

010497113
174122-1: RNCC: 3 | RNVC: 2

23 Oct 1977

5975-01-398-0190
Blank Panel

013980190
4200-1131: RNCC: 3 | RNVC: 2
4200-1131: RNCC: 5 | RNVC: 9

22 Oct 1994

5975-00-903-8280
Electrical Components Tie Down Strap

009038280
MS3367-3-1: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
SST4H1: RNCC: 5 | RNVC: 1
TY27M1: RNCC: 5 | RNVC: 1
TY27M1: RNCC: 5 | RNVC: 1

1 Jan 1960

5975-01-313-6336
Electrical Conduit Cross

013136336
710-M006N04: RNCC: 3 | RNVC: 9

12 Jan 1990

5975-01-313-7521
Electrical Equipment Rack

013137521
10242-6300: RNCC: 3 | RNVC: 2

16 Jan 1990

5975-01-315-5841
Electrical Equipment Rack

013155841
10073-0055: RNCC: 3 | RNVC: 1
RF-594-01: RNCC: 3 | RNVC: 2

20 Feb 1990

5975-01-045-3575
Cable Clamp

010453575
70906150-002: RNCC: 3 | RNVC: 2
70906150-002: RNCC: 5 | RNVC: 9

1 Aug 1977

5975-01-379-2691
Electrical Equipment Mounting Base

013792691
13793-899-1: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-379-4284
Cable Terminal Chamber

013794284
XAGA550D2185/595: RNCC: 3 | RNVC: 2
XAGA-550-D2-KIT-M474: RNCC: 5 | RNVC: 2

31 Aug 1993

5975-01-380-4775
Electrical-Electronic Equipment Panel

013804775
227BC501-1: RNCC: 3 | RNVC: 9
227BC501-1: RNCC: 5 | RNVC: 9

20 Sep 1993

5975-01-630-8006
Electrical Equipment Shelf

016308006
39278-90028-1: RNCC: 3 | RNVC: 2

19 Aug 2014

5975-01-631-3664
Mounting Elect Tray

016313664
RR1079-3: RNCC: 3 | RNVC: 2

10 Sep 2014

5975-01-397-5653
Rigid Metal Conduit

013975653
1310-0101-8: RNCC: 3 | RNVC: 2
1310-0101-8: RNCC: 5 | RNVC: 9

13 Oct 1994

5975-01-397-7756
Rigid Metal Conduit

013977756
1310-0101-12: RNCC: 3 | RNVC: 2
1310-0101-12: RNCC: 5 | RNVC: 9

20 Oct 1994

5975-01-397-4116
Flexible Metal Conduit

013974116
1310-0101-40: RNCC: 3 | RNVC: 2
1310-0101-40: RNCC: 5 | RNVC: 9

8 Oct 1994

5975-01-048-8490
Electrical Components Tie Down Strap

010488490
G470074-4: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-01-163-1057
Flexible Nonmetallic Conduit

011631057
Z1211A00: RNCC: 3 | RNVC: 2

28 Sep 1983

5975-01-165-5970
Ground Rod Retainer

011655970
10288066: RNCC: 3 | RNVC: 2

31 Oct 1983

5975-01-379-1036
Electrical Equipment Mounting Base

013791036
2757-0206-1: RNCC: 3 | RNVC: 2
MT-6931/ASN-165(V): RNCC: 5 | RNVC: 2
2757-0206-1: RNCC: 5 | RNVC: 9

27 Aug 1993

5975-01-379-3695
Cable Terminal Chamber

013793695
XAGA550C2110/490: RNCC: 3 | RNVC: 2
XAGA550-C2-KIT-M474: RNCC: 5 | RNVC: 2

30 Aug 1993

5975-01-617-5209
Electrical Cable Nipple

016175209
0-1394511-1: RNCC: 3 | RNVC: 2
0025458180: RNCC: 5 | RNVC: 2
0025458180: RNCC: 5 | RNVC: 9

26 Mar 2013

5975-01-577-5127
Electrical Equipment Cabinet

015775127
N24208HWT: RNCC: 3 | RNVC: 2

9 Sep 2009

5975-01-577-5699
Junction Box

015775699
1626M34P02 (CELTECH 20-6023-2): RNCC: 3 | RNVC: 2

11 Sep 2009

5975-01-626-4897
Electrical Components Tie Down Strap

016264897
70215K64: RNCC: 3 | RNVC: 2

12 Mar 2014

5975-01-043-9309
Electrical Equipment Drawer

010439309
3150520-618-107: RNCC: 3 | RNVC: 2

2 Jul 1977

5975-01-053-3138
Electrical Conduit

010533138
GA113-7: RNCC: 3 | RNVC: 2
CRN2646-6: RNCC: 5 | RNVC: 2
C8922-6: RNCC: 7 | RNVC: 2

1 Jan 1978

5975-01-323-1482
Blank Panel

013231482
C22-5507: RNCC: 3 | RNVC: 2
C22-5507: RNCC: 3 | RNVC: 9

22 Jul 1990

5975-01-574-3740
Electrical-Electronic Equipment Chassis

015743740
8527290-920: RNCC: 3 | RNVC: 2

27 May 2009

5975-01-393-4761
Electrical-Electronic Equipment Chassis

013934761
149D3365G2: RNCC: 3 | RNVC: 2
149D3365G1: RNCC: 5 | RNVC: 9

20 Jul 1994

5975-01-392-3094
Electrical-Electronic Equipment Chassis

013923094
BCAB6X0A: RNCC: 3 | RNVC: 2

27 Jun 1994

5975-01-393-4754
Blank Panel

013934754
214C1027G1: RNCC: 3 | RNVC: 2

20 Jul 1994

5975-01-072-5917
Special Stuffing Tube

010725917
123268-2: RNCC: 3 | RNVC: 1
123200G1PC28: RNCC: 5 | RNVC: 1

3 Mar 1979

5975-01-333-6535
Electrical Equipment Cabinet

013336535
625015-1: RNCC: 3 | RNVC: 2

8 Feb 1991

5975-01-105-4227
Conduit

011054227
3150000-602-10: RNCC: 3 | RNVC: 2

23 Dec 1980

5975-01-322-0438
Flexible Nonmetallic Conduit

013220438
717-1602-0: RNCC: 3 | RNVC: 2

28 Jun 1990

5975-01-584-9663
Stuffing Tube Adapter

015849663
M24758-15 D B: RNCC: 3 | RNVC: 2

12 May 2010

5975-01-546-0771
Electrical Equipment Shelf

015460771
1-820-000132: RNCC: 3 | RNVC: 2

6 Dec 2006

5975-01-546-5165
Electrical Equipment Mounting Base

015465165
988-8738-001: RNCC: 3 | RNVC: 2

19 Dec 2006

5975-01-546-9083
Electrical-Electronic Equipment Chassis

015469083
WS-C6506E-S32-GE: RNCC: 3 | RNVC: 2

8 Jan 2007

5975-01-392-1560
Metallic Raceway

013921560
6A06085: RNCC: 3 | RNVC: 2

24 Jun 1994

5975-01-390-4444
Electrical Equipment Mounting Base

013904444
3838048-1: RNCC: 3 | RNVC: 2
ZC8-81-202-6-1: RNCC: 7 | RNVC: 2

19 May 1994

5975-01-330-7225
Electrical-Electronic Equipment Chassis

013307225
596796-G01: RNCC: 3 | RNVC: 2

7 Dec 1990

5975-01-144-9359
Grounding Plate

011449359
665598B11402-01: RNCC: 3 | RNVC: 2

31 Dec 1982

5975-01-580-9191
Electrical Equipment Rack

015809191
356578-B21: RNCC: 3 | RNVC: 2

30 Dec 2009

5975-01-581-5694
Junction Box Cover

015815694
915405-4: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-584-2811
Junction Box Cover

015842811
107765: RNCC: 3 | RNVC: 2

21 Apr 2010

5975-01-389-1056
Electrical-Electronic Equipment Chassis

013891056
16784523-007: RNCC: 3 | RNVC: 2

16 Apr 1994

5975-01-100-6719
Bearing

011006719
1843632-1: RNCC: 3 | RNVC: 2
YB3077-1004: RNCC: 5 | RNVC: 2
YB3077-1004: RNCC: 5 | RNVC: 9

11 Sep 1980

5975-01-324-1978
Interconnecting Box

013241978
558-7630-002: RNCC: 3 | RNVC: 2

11 Aug 1990

5975-01-196-3890
Blank Panel

011963890
1214D1790: RNCC: 3 | RNVC: 2
1213D1701 FIND 3: RNCC: 5 | RNVC: 2
1214D1790: RNCC: 5 | RNVC: 9
1213D1701 FIND 3: RNCC: 5 | RNVC: 9

11 Dec 1984

5975-01-316-8336
Electrical Equipment Cabinet

013168336
360C2: RNCC: 3 | RNVC: 2
360C2: RNCC: 3 | RNVC: 9

16 Mar 1990

5975-01-317-6015
Electrical-Electronic Equipment Panel

013176015
879-8088-1: RNCC: 3 | RNVC: 2
879-8088-1: RNCC: 5 | RNVC: 9

1 Apr 1990

5975-01-317-6033
Electrical Wall Plate

013176033
66601-157: RNCC: 3 | RNVC: 9

1 Apr 1990

5975-01-318-0374
Electrical Components Tie Down Strap

013180374
PLT1.5I-C8: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-01-544-2391
Junction Box

015442391
214924: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-545-4305
Electrical Equipment Shelf

015454305
8050694: RNCC: 3 | RNVC: 2
T0078962: RNCC: 5 | RNVC: 2
T0078962: RNCC: 5 | RNVC: 2

13 Nov 2006

5975-01-545-8309
Flexible Nonmetallic Conduit

015458309
12339351-6: RNCC: 3 | RNVC: 2

28 Nov 2006

5975-01-387-2884
Optical Mount Assy

013872884
26027: RNCC: 3 | RNVC: 2
UC300L: RNCC: 5 | RNVC: 9

1 Mar 1994

5975-01-387-3050
Transmission Line Grounding Set

013873050
13231057: RNCC: 3 | RNVC: 2
13231057: RNCC: 5 | RNVC: 9

1 Mar 1994

5975-01-058-3536
Electrical Cable Protector

010583536
GDKF50-125: RNCC: 3 | RNVC: 2
C8843-1: RNCC: 5 | RNVC: 9
GDKF47002-030-28: RNCC: 5 | RNVC: 9
GDKF50-125: RNCC: 5 | RNVC: 9
C8843-2: RNCC: 7 | RNVC: 2

27 Mar 1978

5975-01-059-0854
Bar

010590854
137525-99: RNCC: 3 | RNVC: 2

6 Apr 1978

5975-01-182-5131
Junction Box

011825131
0N329629-1: RNCC: 3 | RNVC: 2

25 Jun 1984

5975-01-172-4043
Front Panel Assy

011724043
619-0451-001: RNCC: 3 | RNVC: 2

20 Feb 1984

5975-01-206-8869
Electrical Cable Nipple

012068869
1-1464-02: RNCC: 3 | RNVC: 9

24 Apr 1985

5975-01-543-7388
Electrical Equipment Rack

015437388
1261B OPT 14: RNCC: 3 | RNVC: 2
407396: RNCC: 3 | RNVC: 2
91796409: RNCC: 5 | RNVC: 2

20 Sep 2006

5975-01-543-9006
Electrical Equipment Mounting Base

015439006
901-370-345-323: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-4933
Conduit Chase Nipple

015434933
2639: RNCC: 3 | RNVC: 2

14 Sep 2006

5975-01-424-2537
Fanning Strip

014242537
75A783014-2005: RNCC: 3 | RNVC: 2

24 Jan 1996

5975-01-386-7467
Electrical-Electronic Equipment Chassis

013867467
628-5497-001: RNCC: 3 | RNVC: 2

14 Feb 1994

5975-01-347-3093
Electrical-Electronic Equipment Panel

013473093
8861776: RNCC: 3 | RNVC: 2

19 Oct 1991

5975-01-179-3782
Electrical Equipment Rack

011793782
16E1348-79: RNCC: 3 | RNVC: 2

17 May 1984

5975-01-313-8186
Electrical Conduit Adapter

013138186
G63164-48: RNCC: 3 | RNVC: 2
101008-48: RNCC: 3 | RNVC: 2
210633-FB6200: RNCC: 3 | RNVC: 2
210633-FB200: RNCC: 5 | RNVC: 9
10250710-48: RNCC: 7 | RNVC: 2

18 Jan 1990

5975-01-422-5505
Electrical-Electronic Equipment Chassis

014225505
294E300G27: RNCC: 3 | RNVC: 2

4 Dec 1995

5975-01-110-4983
Contact Carrier

011104983
14-125-905-001: RNCC: 3 | RNVC: 9

2 Apr 1981

5975-01-342-0956
Electrical Conduit Coupling

013420956
47647: RNCC: 3 | RNVC: 9

16 Jul 1991

5975-01-343-4893
Electrical-Electronic Equipment Panel

013434893
208121-101: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-9336
Electrical-Electronic Equipment Chassis

013439336
719875-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9341
Electrical-Electronic Equipment Chassis

013439341
788181-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-344-1577
Flexible Nonmetallic Conduit

013441577
6611-0151: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-345-7917
Electrical Conduit Adapter

013457917
C004AC1209AA/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-311-8634
Electrical Equipment Mounting Base

013118634
RAT 100SM: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-315-0177
Flexible Nonmetallic Conduit

013150177
CL2C14: RNCC: 3 | RNVC: 2

9 Feb 1990

5975-01-316-4326
Electrical-Electronic Equipment Panel

013164326
153104: RNCC: 3 | RNVC: 9
153104: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-01-317-6838
Cable Marker Sleeve

013176838
SS7026-2045: RNCC: 3 | RNVC: 2

4 Apr 1990

5975-01-106-3595
Assembly Acce Cover

011063595
116051-002: RNCC: 3 | RNVC: 2

16 Jan 1981

5975-01-109-4674
Junction Box

011094674
SP-CU-005-006: RNCC: 3 | RNVC: 2

15 Mar 1981

5975-01-339-3727
Flexible Metal Conduit Assembly

013393727
910288-1800: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-339-4694
Electrical-Electronic Equipment Panel

013394694
D32407-2: RNCC: 3 | RNVC: 9
D32407-2: RNCC: 5 | RNVC: 2
D32407-2: RNCC: 5 | RNVC: 9

22 May 1991

5975-01-340-2893
Cable Marker Sleeve

013402893
506658-15: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-225-5616
Electrical Box Connector

012255616
70A015-1: RNCC: 3 | RNVC: 9
70A15-1: RNCC: 5 | RNVC: 9
70A015-1: RNCC: 5 | RNVC: 9
70A015-1: RNCC: C | RNVC: 1

4 Feb 1986

5975-01-095-9429
Blank Panel

010959429
40174: RNCC: 3 | RNVC: 9

10 Jun 1980

5975-01-098-8392
Nut Protect

010988392
10-405979-229: RNCC: 3 | RNVC: 2

8 Aug 1980

5975-01-098-8393
Nut Protect

010988393
10-405979-209: RNCC: 3 | RNVC: 2

8 Aug 1980

5975-01-390-6902
Electrical Nonmetallic Conduit Assembly

013906902
57350-25: RNCC: 3 | RNVC: 2

24 May 1994

5975-01-313-6547
Electrical Cable Support

013136547
10252163-9: RNCC: 3 | RNVC: 2

12 Jan 1990

5975-01-419-1072
Electrical-Electronic Equipment Chassis

014191072
476210-01: RNCC: 3 | RNVC: 2

13 Sep 1995

5975-01-104-0139
Electrical-Electronic Equipment Chassis

011040139
777-1891-201: RNCC: 3 | RNVC: 2
MX-9519/A: RNCC: 5 | RNVC: 2

25 Nov 1980

5975-01-105-4238
Ground Strap

011054238
3150100-601-11: RNCC: 3 | RNVC: 2

23 Dec 1980

5975-01-106-0997
Labkit No 2

011060997
2999: RNCC: 3 | RNVC: 2

13 Jan 1981

5975-01-372-0977
Electrical Equipment Mounting Base

013720977
10114: RNCC: 3 | RNVC: 2
17B9E1000-525: RNCC: 5 | RNVC: 2

3 Mar 1993

5975-01-301-0887
Electrical Equipment Mounting Base

013010887
2070514-0101: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-214-1433
Electrical Equipment Rack

012141433
16U1459-45: RNCC: 3 | RNVC: 2

6 Aug 1985

5975-01-122-9251
Electrical Components Tie Down Strap

011229251
10S300-2-108: RNCC: 3 | RNVC: 9
10S300-2-108: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-115-3393
Electrical Equipment Drawer

011153393
11450278-9: RNCC: 3 | RNVC: 2
11450278-9: RNCC: 5 | RNVC: 1
11450278-9: RNCC: 5 | RNVC: 9

3 Jul 1981

5975-01-311-9020
Strain Electrical Conductor Clamp

013119020
076-006899-001: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-415-9751
Terminal Board

014159751
9D0090-15U: RNCC: 3 | RNVC: 2
RC11090-15U: RNCC: 5 | RNVC: 2
9D0090: RNCC: D | RNVC: 9

11 Jul 1995

5975-01-299-0509
Electrical Tie Down Mounting Base

012990509
TC301: RNCC: 3 | RNVC: 2

24 Apr 1989

5975-01-124-2213
Electrical Components Tie Down Strap

011242213
SST2SM30: RNCC: 3 | RNVC: 2
91320450: RNCC: 5 | RNVC: 2
SST 2 S-M 30: RNCC: 5 | RNVC: 2
238900144: RNCC: 5 | RNVC: 2
238900144: RNCC: 5 | RNVC: 9

28 Dec 1981

5975-01-414-6123
Electrical Equipment Rack

014146123
70500-24004-046: RNCC: 3 | RNVC: 2

9 Jun 1995

5975-00-943-6766
Top Cover

009436766
0N008719-1: RNCC: 3 | RNVC: 2

28 Jan 1966

5975-01-060-9492
Interconnecting Box

010609492
020706B: RNCC: 3 | RNVC: 2

7 Jun 1978

5975-01-369-7347
Electrical Equipment Mounting Base

013697347
802711-1: RNCC: 3 | RNVC: 2

4 Jan 1993

5975-01-297-2366
Electrical Equipment Cabinet

012972366
T7331L-816T: RNCC: 3 | RNVC: 2

31 Mar 1989

5975-01-297-9476
Junction Box Assembly

012979476
5599622-9: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-364-5680
Electrical Equipment Mounting Base

013645680
622-5211-003: RNCC: 3 | RNVC: 2
706A35-402-026: RNCC: 5 | RNVC: 2
622-5211-003: RNCC: 5 | RNVC: 2

22 Sep 1992

5975-01-419-0678
Conduit Outlet Cover

014190678
E9G2GFT: RNCC: 3 | RNVC: 9

12 Sep 1995

5975-01-417-6316
Junction Box

014176316
628303: RNCC: 3 | RNVC: 2

10 Aug 1995

5975-01-296-4614
Electrical Wall Plate

012964614
7102-0038-02: RNCC: 3 | RNVC: 2

20 Mar 1989

5975-01-295-9785
Electrical Cable Assembly Protector

012959785
57-01060-001: RNCC: 3 | RNVC: 2

14 Mar 1989

5975-00-911-3012
Electrical-Electronic Equipment Chassis

009113012
2064105G1: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-366-3667
Electrical Equipment Cabinet

013663667
29431G: RNCC: 3 | RNVC: 2
29431G: RNCC: 3 | RNVC: 9
HP29431G: RNCC: 5 | RNVC: 9
29431G: RNCC: 5 | RNVC: 9

24 Oct 1992

5975-01-293-4907
Electrical-Electronic Equipment Chassis

012934907
2122909-1: RNCC: 3 | RNVC: 2

3 Feb 1989

5975-01-293-4746
Electrical Wall Plate

012934746
67-03290-001: RNCC: 3 | RNVC: 2

3 Feb 1989

5975-01-128-0821
Shield

011280821
202531: RNCC: 3 | RNVC: 2
202531: RNCC: 5 | RNVC: 9

11 Mar 1982

5975-01-420-9464
Electrical-Electronic Equipment Chassis

014209464
7334048G1: RNCC: 3 | RNVC: 2

28 Oct 1995

5975-01-420-8079
Nonmetallic Raceway

014208079
30TP-2V: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-408-3624
Raceway Adapter

014083624
RVA8: RNCC: 3 | RNVC: 9
00034481028505: RNCC: 5 | RNVC: 9

15 Feb 1995

5975-01-408-7479
Junction Box

014087479
1836AS600-1: RNCC: 3 | RNVC: 2

24 Feb 1995

5975-00-910-3460
Junction Box Cover

009103460
CE223273: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-910-8680
Component Support

009108680
0N008758-1: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-598-4207
Junction Box

015984207
A18149JFGQRR: RNCC: 3 | RNVC: 2

29 Jul 2011

5975-01-362-4733
Electrical-Electronic Equipment Panel

013624733
921102143-009: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-290-9387
Bushing

012909387
2541253: RNCC: 3 | RNVC: 2

20 Dec 1988

5975-01-114-4534
Junction Box

011144534
10934-100: RNCC: 3 | RNVC: 9
10934: RNCC: 5 | RNVC: 9
10934-100: RNCC: C | RNVC: 1

17 Jun 1981

5975-01-406-7917
Cable Hanger

014067917
8511-56-00: RNCC: 3 | RNVC: 9

12 Jan 1995

5975-01-407-5846
Electrical-Electronic Equipment Chassis

014075846
DMHUB-AX: RNCC: 3 | RNVC: 2

31 Jan 1995

5975-01-643-8888
Cable Marker Sleeve

016438888
7030-14: RNCC: 3 | RNVC: 2

15 Apr 2015

5975-01-649-5753
Conduit Outlet

016495753
BACC63CC18-14P8: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-649-5751
Conduit Outlet

016495751
BACC63CC18-31P9: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-359-6059
Electrical Box Connector

013596059
7228332P002: RNCC: 3 | RNVC: 2

10 Jun 1992

5975-01-303-9979
Electrical-Electronic Equipment Chassis

013039979
150-00004-10: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-01-332-0440
Electrical-Electronic Equipment Panel

013320440
52061-0001: RNCC: 3 | RNVC: 2

2 Jan 1991

5975-01-316-4322
Electrical-Electronic Equipment Panel

013164322
230141-21-2: RNCC: 3 | RNVC: 9
230141-21-2: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-01-003-5257
Junction Box Cup

010035257
65550-11011-111: RNCC: 3 | RNVC: 2
65550-11011-111: RNCC: 8 | RNVC: 2

28 Apr 1975

5975-01-434-7428
Cable Marker Sleeve

014347428
M235A774-54: RNCC: 3 | RNVC: 2

6 Aug 1996

5975-01-593-3654
Plasma Cart Mobile

015933654
PFC2000B: RNCC: 3 | RNVC: 2

6 Apr 2011

5975-01-288-9876
Electrical Equipment Rack

012889876
A3015086: RNCC: 3 | RNVC: 2
MT-6612/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-148-1926
Electrical-Electronic Equipment Chassis

011481926
A2045-7: RNCC: 3 | RNVC: 2
A2045-7: RNCC: 5 | RNVC: 9

2 Mar 1983

5975-01-420-3210
Electrical-Electronic Equipment Panel

014203210
16E2512-865: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-433-8757
Electrical-Electronic Equipment Chassis

014338757
3C6004-001: RNCC: 3 | RNVC: 9

12 Jul 1996

5975-01-171-9896
Electrical Equipment Shelf

011719896
41010-96-01: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-657-7125
Electrical Equipment Mounting Base

016577125
6000: RNCC: 3 | RNVC: 2

26 Aug 2016

5975-01-658-6258
Electrical-Electronic Equipment Chassis

016586258
39920-40458-60: RNCC: 3 | RNVC: 2

6 Oct 2016

5975-01-660-9069
Electrical-Electronic Equipment Chassis

016609069
AT-TN-251G: RNCC: 3 | RNVC: 2

9 Feb 2017

5975-01-662-5899
Electrical-Electronic Equipment Panel

016625899
375-8207: RNCC: 3 | RNVC: 2

12 Apr 2017

5975-01-357-0195
Electrical-Electronic Equipment Chassis

013570195
841919-3: RNCC: 3 | RNVC: 2
841919-3: RNCC: 8 | RNVC: 2

16 Apr 1992

5975-01-357-3206
Electrical Components Tie Down Strap

013573206
PLT1-5M30: RNCC: 3 | RNVC: 2
PLT1,5M30: RNCC: 5 | RNVC: 2

21 Apr 1992

5975-01-129-8978
Electrical Conduit Adapter

011298978
533405-70: RNCC: 3 | RNVC: 2
S694-122-87R: RNCC: 5 | RNVC: 2

14 Apr 1982

5975-01-485-8809
Cable Marker Sleeve

014858809
651692: RNCC: 3 | RNVC: 2

11 Jun 2001

5975-01-432-8963
Electrical-Electronic Equipment Chassis

014328963
66000A-847-908: RNCC: 3 | RNVC: 2
66000A-847-908: RNCC: 3 | RNVC: 9
91750294: RNCC: 5 | RNVC: 2
91750294: RNCC: 5 | RNVC: 2
66000AOPT847-908: RNCC: 5 | RNVC: 9

17 Jun 1996

5975-01-431-0921
Junction Box

014310921
ZT96-128C-32-BB: RNCC: 3 | RNVC: 2

7 May 1996

5975-01-207-9281
Electrical Components Tie Down Strap

012079281
TY24M-0: RNCC: 3 | RNVC: 2
SST-1.5-0: RNCC: 3 | RNVC: 2
1927M4: RNCC: 5 | RNVC: 2
10167124: RNCC: 6 | RNVC: 9
911322-240: RNCC: 7 | RNVC: 2

7 May 1985

5975-01-652-0539
Junction Box

016520539
147-044XMS-0006: RNCC: 3 | RNVC: 2

9 Feb 2016

Load More Results