What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 164 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 164 of 176

5975-01-324-5977
Cable Strain Relief Bushing

013245977
784919-1: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-327-7655
Electrical-Electronic Equipment Chassis

013277655
48424-1000-104: RNCC: 3 | RNVC: 2
8424-4: RNCC: 5 | RNVC: 2
48424-1000-104: RNCC: 5 | RNVC: 9
8424-4: RNCC: 5 | RNVC: 9

21 Oct 1990

5975-01-440-6386
Electrical Equipment Rack

014406386
5498161-6: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-00-906-3583
Electrical Duct Ass

009063583
E2X2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-199-9927
Electrical Box Connector

011999927
TGP9385: RNCC: 3 | RNVC: 2

30 Jan 1985

5975-01-435-2200
Insulator Bracket

014352200
570788: RNCC: 3 | RNVC: 9
DE4628: RNCC: 5 | RNVC: 9

16 Aug 1996

5975-01-181-2267
Interconnecting Cabinet

011812267
063045: RNCC: 3 | RNVC: 2
979F063045: RNCC: 5 | RNVC: 9

7 Jun 1984

5975-01-361-0861
Electrical Equipment Rack

013610861
0.106.619.3: RNCC: 3 | RNVC: 2

8 Jul 1992

5975-01-362-1418
Electrical Components Tie Down Strap

013621418
G8203G17NF4-109: RNCC: 3 | RNVC: 2

1 Aug 1992

5975-01-208-4779
Electrical Equipment Mounting Base

012084779
622-2509-001: RNCC: 3 | RNVC: 2
03-512253-2: RNCC: 5 | RNVC: 2

15 May 1985

5975-01-280-9202
Electrical Equipment Rack

012809202
16E1348-111: RNCC: 3 | RNVC: 2

14 Jun 1988

5975-01-477-8063
Electrical-Electronic Equipment Panel

014778063
3353750-1: RNCC: 3 | RNVC: 2

18 Aug 2000

5975-01-478-5505
Interconnecting Box

014785505
K884169-001: RNCC: 3 | RNVC: 2

18 Sep 2000

5975-01-477-6477
Terminal Hea Pickup

014776477
500-1239: RNCC: 3 | RNVC: 2
62/56107: RNCC: 5 | RNVC: 2

14 Aug 2000

5975-01-478-4721
Interconnecting Cabinet

014784721
5320024I: RNCC: 3 | RNVC: 2

13 Sep 2000

5975-01-478-4994
Junction Box Assembly

014784994
KD84417-001: RNCC: 3 | RNVC: 2

14 Sep 2000

5975-01-477-9854
Electrical-Electronic Equipment Panel

014779854
SI08-232: RNCC: 3 | RNVC: 2
123SCMA719-1: RNCC: 5 | RNVC: 2
123SCMA719-1: RNCC: 5 | RNVC: 9

25 Aug 2000

5975-01-478-7632
Electrical Equipment Rack

014787632
KD84019-005: RNCC: 3 | RNVC: 2

26 Sep 2000

5975-01-479-5274
Electrical Equipment Cabinet

014795274
348700-001: RNCC: 3 | RNVC: 2

24 Oct 2000

5975-01-478-5818
Interconnecting Box

014785818
K884223-001: RNCC: 3 | RNVC: 2

19 Sep 2000

5975-01-524-5409
Electrical-Electronic Equipment Chassis

015245409
FS-1112: RNCC: 3 | RNVC: 2

6 Oct 2004

5975-01-356-9977
Electrical Equipment Rack

013569977
10301-1500: RNCC: 3 | RNVC: 2

16 Apr 1992

5975-01-278-2630
Electrical Components Tie Down Strap

012782630
PRT2SC20: RNCC: 3 | RNVC: 2
48100: RNCC: 5 | RNVC: 2

3 May 1988

5975-01-278-8229
Electrical-Electronic Equipment Chassis

012788229
0N383009-1: RNCC: 3 | RNVC: 2

10 May 1988

5975-01-280-0269
Electrical-Electronic Equipment Panel

012800269
672-0740-00: RNCC: 3 | RNVC: 2

29 May 1988

5975-01-476-4765
Electrical Nonmetallic Conduit Assembly

014764765
70107882-69: RNCC: 3 | RNVC: 2
38597ASSY70107882-69: RNCC: 5 | RNVC: 2

13 Jul 2000

5975-01-476-1729
Electrical Equipment Cabinet

014761729
9142: RNCC: 3 | RNVC: 2
120663-B21: RNCC: 5 | RNVC: 2

28 Jun 2000

5975-01-521-9090
Electrical-Electronic Equipment Chassis

015219090
39100-49E: RNCC: 3 | RNVC: 2

9 Jul 2004

5975-01-522-7146
Electrical Equipment Rack

015227146
5HK01151-101: RNCC: 3 | RNVC: 2

9 Aug 2004

5975-01-173-5127
Electrical-Electronic Equipment Chassis

011735127
229-026251-03: RNCC: 3 | RNVC: 2
229-026251-02: RNCC: 5 | RNVC: 9
229-026251-01: RNCC: 5 | RNVC: 9

7 Mar 1984

5975-00-448-3177
Conduit Assembly

004483177
5143436-3: RNCC: 3 | RNVC: 2
5143436-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-122-9260
Electrical Components Tie Down Strap

011229260
10S300-2-135: RNCC: 3 | RNVC: 9
10S300-2-135: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-278-2830
Junction Box

012782830
4802: RNCC: 3 | RNVC: 2
4802: RNCC: 5 | RNVC: 9

3 May 1988

5975-01-516-9454
Cable Hanger

015169454
288319: RNCC: 3 | RNVC: 2

26 Jan 2004

5975-01-516-9099
Blank Panel

015169099
7012738-905: RNCC: 3 | RNVC: 2

23 Jan 2004

5975-01-348-3346
Electrical Cable Nipple

013483346
43BLACK: RNCC: 3 | RNVC: 2

8 Nov 1991

5975-01-123-1174
Electronic Bracket

011231174
SM-D-858693: RNCC: 3 | RNVC: 2

6 Dec 1981

5975-01-244-3005
Electrical Equipment Mounting Base

012443005
622-7670-001: RNCC: 3 | RNVC: 2
MB-6534/ARC-190(V): RNCC: 5 | RNVC: 2

9 Nov 1986

5975-01-249-3204
Electrical Components Tie Down Strap

012493204
PLT8HQ: RNCC: 3 | RNVC: 2
720570-1: RNCC: 5 | RNVC: 2

10 Feb 1987

5975-01-472-7050
Electronic Equipment Mounting Tray

014727050
3354413-3: RNCC: 3 | RNVC: 2

14 Mar 2000

5975-01-472-3267
Electrical Equipment Cabinet

014723267
K939720610: RNCC: 3 | RNVC: 9

28 Feb 2000

5975-01-472-4928
Electrical-Electronic Equipment Panel

014724928
3351980-75: RNCC: 3 | RNVC: 2

6 Mar 2000

5975-01-472-5126
Electrical-Electronic Equipment Panel

014725126
K633720006: RNCC: 3 | RNVC: 9

6 Mar 2000

5975-01-473-2169
Blank Panel

014732169
BACP10U0750B: RNCC: 3 | RNVC: 2

30 Mar 2000

5975-01-514-0102
Blank Panel

015140102
957-236050: RNCC: 3 | RNVC: 2
957-236050H: RNCC: 5 | RNVC: 9

14 Oct 2003

5975-01-513-5975
Electrical Equipment Rack

015135975
120597-0001: RNCC: 3 | RNVC: 2
58353 00200: RNCC: 5 | RNVC: 2

30 Sep 2003

5975-01-303-2166
Insulator Bracket

013032166
70500-82202-112: RNCC: 3 | RNVC: 2

27 Jun 1989

5975-01-303-6744
Tiedown Strap Holder

013036744
650-40587-C: RNCC: 3 | RNVC: 2

4 Jul 1989

5975-01-302-8203
Electrical Components Tie Down Strap

013028203
696-40527-6-2: RNCC: 3 | RNVC: 2
696-40527-6-2-C: RNCC: 5 | RNVC: 2

20 Jun 1989

5975-01-302-4791
Electrical-Electronic Equipment Chassis

013024791
D78780-11118: RNCC: 3 | RNVC: 2

15 Jun 1989

5975-01-242-9548
Electrical Equipment Mounting Base

012429548
622-7570-001: RNCC: 3 | RNVC: 2

20 Oct 1986

5975-01-471-7546
Electrical-Electronic Equipment Chassis

014717546
7500-12HS-1A: RNCC: 3 | RNVC: 2

14 Feb 2000

5975-01-471-7548
Blank Panel

014717548
998079-1: RNCC: 3 | RNVC: 2

14 Feb 2000

5975-01-497-0448
Electrical-Electronic Equipment Chassis

014970448
790-1851-001: RNCC: 3 | RNVC: 2

7 May 2002

5975-01-301-0039
Interfac Ercs

013010039
1667203-100: RNCC: 3 | RNVC: 2

23 May 1989

5975-01-301-3642
Electrical Equipment Cabinet

013013642
2256-5: RNCC: 3 | RNVC: 2

27 May 1989

5975-00-448-3161
Flexible Metal Conduit Assembly

004483161
C151-0375-1708-7777: RNCC: 3 | RNVC: 2
5116427-6: RNCC: 5 | RNVC: 2
C151-0375-1708-7777: RNCC: 5 | RNVC: 9
5116427-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-448-3099
Conduit Assy-Eng Se

004483099
2143124: RNCC: 3 | RNVC: 2
2143124: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-295-0590
Electrical-Electronic Equipment Chassis

012950590
2122908-1: RNCC: 3 | RNVC: 2

27 Feb 1989

5975-01-581-2683
Electrical Equipment Rack

015812683
RX2019-2: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-582-8705
Junction Box Cover

015828705
77D616421G001-C100: RNCC: 3 | RNVC: 2
77D616421G001-C100: RNCC: 5 | RNVC: 2
77D616421G001-C100: RNCC: 5 | RNVC: 9

10 Mar 2010

5975-01-581-2354
Junction Box

015812354
M81714/24-2D002: RNCC: 2 | RNVC: 2

11 Jan 2010

5975-01-582-1680
Electrical-Electronic Equipment Chassis

015821680
1970AS310-1: RNCC: 3 | RNVC: 2

10 Feb 2010

5975-01-581-5823
Junction Box

015815823
915623-3: RNCC: 3 | RNVC: 2

22 Jan 2010

5975-01-582-4153
Electrical-Electronic Equipment Chassis

015824153
484184-B21: RNCC: 3 | RNVC: 2
484184-B21: RNCC: 5 | RNVC: 9

19 Feb 2010

5975-01-468-4320
Electrical-Electronic Equipment Chassis

014684320
751-2552-001: RNCC: 3 | RNVC: 2

8 Oct 1999

5975-01-469-3161
Electrical Equipment Mounting Base

014693161
RMT-6: RNCC: 3 | RNVC: 2
RMT-6: RNCC: 3 | RNVC: 9
RMT6-1000-02: RNCC: D | RNVC: 9

10 Nov 1999

5975-01-468-9250
Flexible Metal Conduit Assembly

014689250
254730: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-7315
Electrical Equipment Mounting Base

014687315
775-4538-002: RNCC: 3 | RNVC: 2

20 Oct 1999

5975-01-470-2756
Flexible Metal Conduit Assembly

014702756
226481-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-505: RNCC: 7 | RNVC: 2

13 Dec 1999

5975-01-529-7798
Electrical Equipment Mounting Base

015297798
606-9067-003: RNCC: 3 | RNVC: 2

29 Apr 2005

5975-01-495-8423
Electrical-Electronic Equipment Chassis

014958423
546-6669-004: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-495-8969
Electrical Equipment Mounting Base

014958969
546-7055-002: RNCC: 3 | RNVC: 2

27 Mar 2002

5975-01-496-1673
Electrical-Electronic Equipment Chassis

014961673
549-1686-005: RNCC: 3 | RNVC: 2

4 Apr 2002

5975-01-588-3057
Electrical Equipment Rack

015883057
POWEREDGE 4220-RACK: RNCC: 3 | RNVC: 2

13 Sep 2010

5975-01-588-8744
Electrical Equipment Cabinet

015888744
OR-43500109: RNCC: 3 | RNVC: 2

7 Oct 2010

5975-01-588-7201
Electrical-Electronic Equipment Chassis

015887201
ASR1002-5G/K9: RNCC: 3 | RNVC: 2

30 Sep 2010

5975-00-488-3101
Stud-Roller Ground

004883101
BEA145A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-488-7806
Electrical Conduit Ferrule

004887806
36A2214-6: RNCC: 3 | RNVC: 2
113-1-1000: RNCC: 5 | RNVC: 2
113-1-1000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-292-1603
Electrical Grounding Plate

012921603
503972: RNCC: 3 | RNVC: 2
503972: RNCC: 5 | RNVC: 9

12 Jan 1989

5975-01-293-5622
Conduit Outlet Cover

012935622
G206LS2: RNCC: 3 | RNVC: 2

3 Feb 1989

5975-01-657-7261
Chassis Base

016577261
157670-11312XX-X: RNCC: 3 | RNVC: 2

26 Aug 2016

5975-01-580-9603
Electrical Equipment Rack

015809603
HA864A1: RNCC: 3 | RNVC: 2

31 Dec 2009

5975-01-468-8561
Flexible Metal Conduit Assembly

014688561
3260AS391: RNCC: 3 | RNVC: 2

25 Oct 1999

5975-01-468-9225
Electrical Conduit Ferrule

014689225
FERRULE SET 0009: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-232-0364
Electrical Equipment Rack

012320364
10011171-001: RNCC: 3 | RNVC: 2

16 Dec 2020

5975-01-526-2069
Electrical Equipment Mounting Base

015262069
7031800-902: RNCC: 3 | RNVC: 2
S932M10A1003: RNCC: 5 | RNVC: 2
7031800-902: RNCC: 5 | RNVC: 2

10 Dec 2004

5975-01-527-5690
Flexible Metal Conduit Assembly

015275690
363844-1: RNCC: 3 | RNVC: 2

8 Feb 2005

5975-01-493-6983
Electrical Grounding Plate

014936983
4254508-4: RNCC: 3 | RNVC: 2
4254508-4: RNCC: 5 | RNVC: 2

15 Jan 2002

5975-01-493-5679
Electronic Equipment Mounting Tray

014935679
RMA-30: RNCC: 3 | RNVC: 2
LCXXX-RMA-1: RNCC: 5 | RNVC: 9

9 Jan 2002

5975-01-492-9827
Electrical-Electronic Equipment Chassis

014929827
1582AS123-1: RNCC: 3 | RNVC: 2

18 Dec 2001

5975-01-494-0322
Electrical Equipment Mounting Base

014940322
822-1708-002: RNCC: 3 | RNVC: 2

29 Jan 2002

5975-01-586-7367
Electrical-Electronic Equipment Chassis

015867367
CT-310A: RNCC: 3 | RNVC: 2
CT-310A: RNCC: 3 | RNVC: 9

12 Jul 2010

5975-01-649-2246
Junction Box

016492246
JBA4912-4: RNCC: 3 | RNVC: 2

21 Oct 2015

5975-01-649-4003
Guide Rail

016494003
RBGT2: RNCC: 3 | RNVC: 2

28 Oct 2015

5975-01-163-6561
Electrical-Electronic Equipment Chassis

011636561
62007026-000: RNCC: 3 | RNVC: 2

6 Oct 1983

5975-01-230-4994
Metallic Raceway

012304994
777056-1: RNCC: 3 | RNVC: 2

14 Apr 1986

5975-01-583-4949
Electrical Equipment Mounting Base

015834949
5406-02-0032: RNCC: 3 | RNVC: 2

26 Mar 2010

5975-01-584-2813
Junction Box Cover

015842813
107766: RNCC: 3 | RNVC: 2

21 Apr 2010

5975-01-342-0946
Electrical Wall Plate

013420946
P18SS: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-1513
Electrical-Electronic Equipment Panel

013421513
10276-1150: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-6982
Electrical Cable Nipple

013426982
2159552-3: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-343-5103
Electrical Box Connector

013435103
30537-501: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-6132
Electrical Equipment Mounting Base

013436132
70500-24013-112: RNCC: 3 | RNVC: 2

15 Aug 1991

5975-01-646-0345
Electrical-Electronic Equipment Chassis

016460345
6001065: RNCC: 3 | RNVC: 2

9 Jul 2015

5975-01-646-2984
Electrical Conduit Coupling

016462984
M24758-23E: RNCC: 3 | RNVC: 2

17 Jul 2015

5975-01-647-1228
Electrical Equipment Shelf

016471228
69-57771-1: RNCC: 3 | RNVC: 2

12 Aug 2015

5975-01-647-9538
Cable Reinforcing Link

016479538
69-76554-1: RNCC: 3 | RNVC: 2

9 Sep 2015

5975-01-648-7669
Electrical Equipment Rack

016487669
H6J78A: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-161-4657
Electrical-Electronic Equipment Chassis

011614657
29209-19: RNCC: 3 | RNVC: 2

6 Sep 1983

5975-00-953-8732
Conduit Outlet

009538732
LR18: RNCC: 3 | RNVC: 2
LR18: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-583-6949
Electrical Chassis

015836949
269163G1: RNCC: 3 | RNVC: 2
269163: RNCC: 5 | RNVC: 9

1 Apr 2010

5975-01-340-2896
Cable Marker Sleeve

013402896
506658-11: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-643-3340
Electrical-Electronic Equipment Chassis

016433340
1261B-S-1708: RNCC: 3 | RNVC: 2

30 Mar 2015

5975-01-194-1173
Electrical Cable Protector

011941173
10671879: RNCC: 3 | RNVC: 2
10671879: RNCC: 5 | RNVC: 1

10 Nov 1984

5975-01-194-3389
Electrical Equipment Rack

011943389
0N361043: RNCC: 3 | RNVC: 2
CY-8405/FSC-99: RNCC: 5 | RNVC: 2

13 Nov 1984

5975-01-488-5667
Electrical Components Tie Down Strap

014885667
1375-04-0001: RNCC: 3 | RNVC: 2
G95948: RNCC: D | RNVC: 9

28 Aug 2001

5975-01-488-1051
Flexible Metal Conduit Assembly

014881051
5HM40034-107: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-487-8427
Electrical Equipment Rack

014878427
5HK01251-109: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-488-0935
Flexible Metal Conduit Assembly

014880935
5HM40048-106: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-6646
Electrical-Electronic Equipment Chassis

014886646
72D245046-1005: RNCC: 3 | RNVC: 2

30 Aug 2001

5975-01-580-9634
Electrical Equipment Rack

015809634
HA124A1#568: RNCC: 3 | RNVC: 2

31 Dec 2009

5975-01-581-4409
Electrical-Electronic Equipment Chassis

015814409
779508-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5975-01-581-3754
Guide Rail

015813754
6714278: RNCC: 3 | RNVC: 2

13 Jan 2010

5975-01-339-3799
Electrical Conduit Adapter

013393799
900327: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-338-9891
Electrical-Electronic Equipment Panel

013389891
123SAV57880-1: RNCC: 3 | RNVC: 2
123SAV57880-1: RNCC: 5 | RNVC: 9

14 May 1991

5975-01-339-5318
Electrical Cable Protector

013395318
3612815-2: RNCC: 3 | RNVC: 2
892322: RNCC: 5 | RNVC: 2

23 May 1991

5975-01-340-2889
Cable Marker Sleeve

013402889
506658-19: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-3398
Electrical-Electronic Equipment Chassis

013403398
58213: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2892
Cable Marker Sleeve

013402892
506658-16: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-189-7345
Strain Electrical Conductor Clamp

011897345
1211166-00: RNCC: 3 | RNVC: 2

20 Sep 1984

5975-01-400-2398
Electrical Equipment Rack

014002398
BA641-C9: RNCC: 3 | RNVC: 2

12 Dec 1994

5975-01-215-1205
Electrical Box Connector

012151205
10545451: RNCC: 3 | RNVC: 2

22 Aug 1985

5975-01-486-3005
Cable Marker Sleeve

014863005
651664: RNCC: 3 | RNVC: 2

25 Jun 2001

5975-01-486-3010
Cable Marker Sleeve

014863010
651669: RNCC: 3 | RNVC: 2

25 Jun 2001

5975-01-487-0102
Electrical Equipment Rack

014870102
A5214A: RNCC: 3 | RNVC: 2

20 Jul 2001

5975-01-486-8978
Electrical-Electronic Equipment Panel

014868978
504363: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-487-2358
Electrical-Electronic Equipment Chassis

014872358
274875-01: RNCC: 3 | RNVC: 2

30 Jul 2001

5975-01-487-2359
Electrical-Electronic Equipment Chassis

014872359
274831-01: RNCC: 3 | RNVC: 2

30 Jul 2001

5975-01-487-2325
Locking Sleeve

014872325
12900694: RNCC: 3 | RNVC: 2

30 Jul 2001

5975-01-578-4637
Electrical Equipment Rack

015784637
HP RACK 10622 RACK 22U: RNCC: 3 | RNVC: 2
HP RACK 10622 RACK 22U: RNCC: 5 | RNVC: 9

7 Oct 2009

5975-01-578-6829
Electrical-Electronic Equipment Chassis

015786829
J8770A: RNCC: 3 | RNVC: 2
5055266231311: RNCC: 5 | RNVC: 1

15 Oct 2009

5975-01-337-2835
Electrical Cable Support

013372835
90-09670-04: RNCC: 3 | RNVC: 2

11 Apr 1991

5975-01-338-4981
Electrical Conduit Adapter

013384981
ST5M1331L12C12: RNCC: 3 | RNVC: 2

4 May 1991

5975-01-337-9447
Electrical Conduit Adapter

013379447
900-447-612405-03: RNCC: 3 | RNVC: 2

24 Apr 1991

5975-01-184-9382
Electrical-Electronic Equipment Chassis

011849382
4041807-952: RNCC: 3 | RNVC: 2

24 Jul 1984

5975-01-398-1460
Rigid Metal Conduit

013981460
1310-0101-33: RNCC: 3 | RNVC: 2
1310-0101-33: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-398-1455
Rigid Metal Conduit

013981455
1310-0101-31: RNCC: 3 | RNVC: 2
1310-0101-31: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-398-0193
Rigid Metal Conduit

013980193
1310-0101-27: RNCC: 3 | RNVC: 2
1310-0101-27: RNCC: 5 | RNVC: 9

22 Oct 1994

5975-01-201-1013
Junction Box

012011013
1213D1414: RNCC: 3 | RNVC: 2
PL 1213D1414: RNCC: 3 | RNVC: 2
1213E1180 FIND 19: RNCC: 5 | RNVC: 2
PL 1213E1180 FIND 19: RNCC: 5 | RNVC: 2
1213D1414: RNCC: 5 | RNVC: 9
1213E1180 FIND 19: RNCC: 5 | RNVC: 9
PL 1213D1414: RNCC: 5 | RNVC: 9
PL 1213E1180 FIND 19: RNCC: 5 | RNVC: 9

12 Feb 1985

5975-01-484-4990
Cable Marker Sleeve

014844990
2540806-1: RNCC: 3 | RNVC: 2
2540806-1: RNCC: 5 | RNVC: 9

30 Apr 2001

5975-01-485-8802
Cable Marker Sleeve

014858802
651808: RNCC: 3 | RNVC: 2

11 Jun 2001

5975-01-485-5074
Cable Strain Relief Bushing

014855074
106877001: RNCC: 3 | RNVC: 2

30 May 2001

5975-01-576-7317
Plasma Cart Mobile

015767317
PFCUB: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-576-8241
Ground Rod

015768241
588: RNCC: 3 | RNVC: 2

15 Aug 2009

5975-01-605-8830
Electrical-Electronic Equipment Chassis

016058830
811R316G03: RNCC: 3 | RNVC: 2

28 Apr 2012

5975-01-577-9613
Electrical Equipment Rack

015779613
RSLAN-24: RNCC: 3 | RNVC: 2

23 Sep 2009

5975-01-577-9291
Electrical-Electronic Equipment Chassis

015779291
88861MU: RNCC: 3 | RNVC: 2

22 Sep 2009

5975-01-577-9625
Electrical Components Tie Down Strap

015779625
TM3S8-0: RNCC: 3 | RNVC: 2
3887000230: RNCC: 5 | RNVC: 2
TE30008683-014: RNCC: 5 | RNVC: 2

23 Sep 2009

5975-01-335-6558
Blank Panel

013356558
82401018-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-336-8507
Electrical Equipment Rack

013368507
HPR332: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-396-3371
Electrical Cable Nipple

013963371
TCFS-12-19C-0-20-100-AH: RNCC: 3 | RNVC: 2

19 Sep 1994

5975-01-397-4817
Flexible Metal Conduit

013974817
1310-0101-1: RNCC: 3 | RNVC: 2
1310-0101-1: RNCC: 5 | RNVC: 9

12 Oct 1994

5975-01-397-5649
Flexible Metal Conduit

013975649
1310-0101-7: RNCC: 3 | RNVC: 2
1310-0101-7: RNCC: 5 | RNVC: 9

13 Oct 1994

5975-00-892-9486
Stuffing Tube Subassembly

008929486
REB49397REVC: RNCC: 3 | RNVC: 2
2387021-61: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-948-6159
Electrical-Electronic Equipment Chassis

009486159
CE190562: RNCC: 3 | RNVC: 2

6 Apr 1966

5975-01-233-7162
Junction Box

012337162
1213D1700: RNCC: 3 | RNVC: 2
1213E1161 FIND 45: RNCC: 5 | RNVC: 2
1213D1700: RNCC: 5 | RNVC: 9
1213E1161 FIND 45: RNCC: 5 | RNVC: 9

1 Jun 1986

5975-01-483-4654
Electrical-Electronic Equipment Chassis

014834654
687-3000-050: RNCC: 3 | RNVC: 2
C99A9762-1: RNCC: 5 | RNVC: 9
C99A9762-1: RNCC: C | RNVC: 1

29 Mar 2001

5975-01-483-8726
Electrical Conduit Adapter

014838726
712GS116A2332C3: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-483-9913
Cable Marker Sleeve

014839913
2540806-70: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-9923
Cable Marker Sleeve

014839923
2540806-76: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-9911
Cable Marker Sleeve

014839911
2540806-59: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-9931
Cable Marker Sleeve

014839931
2540806-82: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-484-4999
Cable Marker Sleeve

014844999
2540806-88: RNCC: 3 | RNVC: 2
2540806-88: RNCC: 5 | RNVC: 9

30 Apr 2001

5975-01-604-5124
Electrical-Electronic Equipment Chassis

016045124
N20-C6508: RNCC: 3 | RNVC: 2

6 Apr 2012

5975-01-575-5882
Electrical-Electronic Equipment Chassis

015755882
990-00013: RNCC: 3 | RNVC: 2

8 Jul 2009

5975-01-343-4762
Junction Box

013434762
069701: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-5466
Cable Marker Sleeve

013435466
638R089H59: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-0254
Electrical Components Tie Down Strap

013430254
CT2222-1: RNCC: 3 | RNVC: 2
119-0831-001: RNCC: 5 | RNVC: 2
MFGR-CT-2222: RNCC: 5 | RNVC: 9
CT2222: RNCC: 5 | RNVC: 9
119-0831-001: RNCC: 5 | RNVC: 9

4 Aug 1991

5975-01-343-9339
Electrical-Electronic Equipment Chassis

013439339
765298-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-5162
Flexible Metal Conduit

013435162
S152-2064: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-9615
Electrical Cable Nipple

013439615
2542013-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-344-3170
Electrical-Electronic Equipment Chassis

013443170
3601666-0501: RNCC: 3 | RNVC: 2

27 Aug 1991

5975-01-333-3146
Junction Box

013333146
02-0130: RNCC: 3 | RNVC: 9
02-0130: RNCC: 5 | RNVC: 2
6227497-3: RNCC: 7 | RNVC: 2

30 Jan 1991

5975-01-622-8712
Electronic Equipment Mounting Tray

016228712
822-3090-001: RNCC: 3 | RNVC: 2

23 Oct 2013

5975-01-625-1548
Electrical Equipment Mounting Base

016251548
N1911A-908: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1770
Stuffing Tube

016251770
8615012A: RNCC: 3 | RNVC: 2

28 Jan 2014

5975-01-628-1806
Electrical Equipment Mounting Base

016281806
SMK-50: RNCC: 3 | RNVC: 2

13 May 2014

5975-01-466-4510
Flexible Metal Conduit

014664510
1310-0101-44: RNCC: 3 | RNVC: 2
1310-0101-44: RNCC: 5 | RNVC: 9
1310-0101-44: RNCC: C | RNVC: 1
7760-0046: RNCC: D | RNVC: 9

20 Jul 1999

5975-01-466-7283
Electronic Equipment Mounting Tray

014667283
17P1E1033-27: RNCC: 3 | RNVC: 2

29 Jul 1999

5975-01-481-0489
Shop Set Installation Electrical Kit

014810489
3700104-001: RNCC: 3 | RNVC: 2
3700104-001: RNCC: 5 | RNVC: 9

15 Dec 2000

5975-01-481-1045
Electrical Conductor Bushing

014811045
EH-00074-003: RNCC: 3 | RNVC: 2

18 Dec 2000

5975-01-482-4573
Electrical Conduit Wye

014824573
710-107NFA20B16C16: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-01-481-9621
Electrical Equipment Mounting Base

014819621
622-5134-004: RNCC: 3 | RNVC: 2
WMT-702X: RNCC: 5 | RNVC: 2

1 Feb 2001

5975-01-340-0133
Junction Box Cover

013400133
RS-15: RNCC: 3 | RNVC: 2

6 Jun 1991

5975-01-340-2898
Cable Marker Sleeve

013402898
506658-1: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-618-9750
Electrical Equipment Cabinet

016189750
BW903A: RNCC: 3 | RNVC: 2

13 May 2013

5975-01-619-6307
Electrical-Electronic Equipment Panel

016196307
20-0712-46-051 TEX: RNCC: 3 | RNVC: 2

11 Jun 2013

5975-01-293-7090
Blank Panel

012937090
RFP37-3: RNCC: 3 | RNVC: 2

4 Feb 1989

5975-01-465-9732
Electrical Equipment Cabinet

014659732
10L6912: RNCC: 3 | RNVC: 2
10L6912: RNCC: 3 | RNVC: 9
10L6912: RNCC: 5 | RNVC: 9

29 Jun 1999

5975-01-343-6283
Electrical-Electronic Equipment Chassis

013436283
708667-1: RNCC: 3 | RNVC: 2

15 Aug 1991

5975-01-343-9344
Electrical-Electronic Equipment Chassis

013439344
719996-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-344-2968
Electrical Equipment Rack

013442968
522-0793-005: RNCC: 3 | RNVC: 2

27 Aug 1991

5975-01-344-7269
Electrical Equipment Rack

013447269
522-0335-004: RNCC: 3 | RNVC: 2

6 Sep 1991

5975-01-323-1661
Electrical Equipment Rack

013231661
431-10755263: RNCC: 3 | RNVC: 9

23 Jul 1990

5975-01-338-1551
Electrical Equipment Rack

013381551
01-A-6010: RNCC: 3 | RNVC: 2
54002090: RNCC: 5 | RNVC: 9

26 Apr 1991

5975-01-339-3728
Flexible Metal Conduit Assembly

013393728
910278: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-558-8318
Electrical-Electronic Equipment Panel

015588318
2218018-001: RNCC: 3 | RNVC: 2

26 Nov 2007

5975-01-558-6919
Cable Hanger

015586919
9500-B74629-2: RNCC: 3 | RNVC: 2

19 Nov 2007

5975-01-292-0936
Electrical Equipment Rack

012920936
SM-D-982522: RNCC: 3 | RNVC: 2
MT-6654/G: RNCC: 5 | RNVC: 2

11 Jan 1989

5975-01-291-0359
Fastening Rack

012910359
0020460010: RNCC: 3 | RNVC: 2
2026: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-01-291-8041
Electrical Equipment Rack

012918041
2722-0203-1: RNCC: 3 | RNVC: 2
MT-6842/ASN-159: RNCC: 5 | RNVC: 1
2722-0203-1: RNCC: 5 | RNVC: 9
MT-6842/ASN-159: RNCC: 5 | RNVC: 9

6 Jan 1989

5975-01-465-2043
Insulator Bracket

014652043
17P1N4027-651: RNCC: 3 | RNVC: 2

26 May 1999

5975-01-265-8640
Electrical Conduit Adapter

012658640
A2107S28050B055: RNCC: 3 | RNVC: 2

18 Oct 1987

5975-01-342-3099
Electrical Box Adapter Flange

013423099
0N366029-1: RNCC: 3 | RNVC: 2

19 Jul 1991

5975-01-343-2857
Electrical-Electronic Equipment Chassis

013432857
1429M82P01: RNCC: 3 | RNVC: 2

9 Aug 1991

5975-01-343-9327
Electrical Equipment Cabinet

013439327
719043-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-335-6556
Blank Panel

013356556
86411021-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-336-7375
Strain Electrical Conductor Clamp

013367375
937832-103: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-556-7889
Electrical Tie Down Mounting Base

015567889
SB6000UG2NY1TP: RNCC: 3 | RNVC: 2
CB4020V3N6P750: RNCC: 3 | RNVC: 2
9D0271P101T: RNCC: 5 | RNVC: 2

4 Oct 2007

5975-01-557-1960
Electrical-Electronic Equipment Chassis

015571960
26100-007: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-557-2793
Electronic Equipment Mounting Tray

015572793
XTA-MT3-H2DBTBZ: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-290-8489
Electrical Equipment Drawer

012908489
966820-123: RNCC: 3 | RNVC: 2

17 Dec 1988

5975-01-290-3680
Electrical-Electronic Equipment Panel

012903680
70450-81105-042: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-461-2929
Electrical-Electronic Equipment Panel

014612929
11465131: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-341-3717
Electrical-Electronic Equipment Chassis

013413717
30687-1: RNCC: 3 | RNVC: 2

27 Jun 1991

5975-01-340-2668
Electrical Components Tie Down Strap

013402668
506657-34: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-596-3040
Chassis Base

015963040
230625-903: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-597-0086
Electrical-Electronic Equipment Chassis

015970086
7249659: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-597-1634
Electrical Equipment Rack

015971634
E5052B-1CM: RNCC: 3 | RNVC: 2
E5052B-1CM: RNCC: 3 | RNVC: 9
91912096: RNCC: 5 | RNVC: 2

31 May 2011

5975-01-596-9021
Electrical-Electronic Equipment Chassis

015969021
SPT-3150: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-597-1635
Electrical Equipment Rack

015971635
E8257D-1CM: RNCC: 3 | RNVC: 2
E8257D-1CM: RNCC: 3 | RNVC: 9
91912017: RNCC: 5 | RNVC: 2

31 May 2011

5975-00-387-6515
Electrical Conductor Bushing

003876515
70L: RNCC: 3 | RNVC: 2
6-1-2337-20-473: RNCC: 5 | RNVC: 2
L75997: RNCC: 5 | RNVC: 9
6-1-2337-20-473A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-333-6295
Flexible Metal Conduit Assembly

003336295
5334403-516: RNCC: 3 | RNVC: 2
5334403-516: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-332-8459
Electrical-Electronic Equipment Chassis

013328459
DAA3382A119-005: RNCC: 3 | RNVC: 2

18 Jan 1991

5975-01-554-7499
Electrical Chassis

015547499
266951G1: RNCC: 3 | RNVC: 2

17 Aug 2007

5975-01-553-4326
Electrical Equipment Mounting Base

015534326
2231-1002: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-553-5412
Electrical Equipment Rack

015535412
7124-0145-2: RNCC: 3 | RNVC: 9

18 Jul 2007

5975-01-303-6701
Electrical-Electronic Equipment Chassis

013036701
217257-0002D: RNCC: 3 | RNVC: 2

4 Jul 1989

5975-01-303-6757
Electrical Components Tie Down Strap

013036757
696-40527-1-7: RNCC: 3 | RNVC: 2
696-40527-1-7-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-289-7093
Electrical Equipment Mounting Base

012897093
622-7303-001: RNCC: 3 | RNVC: 2

28 Nov 1988

5975-01-460-0610
Electrical Equipment Mounting Base

014600610
822-0597-001: RNCC: 3 | RNVC: 2

23 Oct 1998

5975-01-460-0589
Fan Monitor

014600589
622-7154-002: RNCC: 3 | RNVC: 2

23 Oct 1998

5975-01-460-4894
Electronic Equipment Mounting Tray

014604894
GLN7342A: RNCC: 3 | RNVC: 2
GLN7342A: RNCC: 3 | RNVC: 9

5 Nov 1998

5975-01-461-2357
Flexible Metal Conduit Assembly

014612357
230749-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-549: RNCC: 7 | RNVC: 2

4 Dec 1998

5975-01-461-5339
Electrical-Electronic Equipment Chassis

014615339
10535-3010-01: RNCC: 3 | RNVC: 2

16 Dec 1998

5975-01-460-8400
Flexible Nonmetallic Conduit

014608400
8355-1: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-01-461-9407
Electrical Equipment Rack

014619407
101259058-001: RNCC: 3 | RNVC: 2

12 Jan 1999

5975-01-461-3541
Electrical Conduit Tee

014613541
227257-F500000A: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-01-189-0604
Cable Strain Relief Bushing

011890604
K481-6: RNCC: 3 | RNVC: 2

11 Sep 1984

5975-01-190-6916
Electrical Components Tie Down Strap

011906916
SST1-5MX30: RNCC: 3 | RNVC: 2

29 Sep 1984

5975-01-259-5223
Blade

012595223
8000-417H: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-260-7181
Electrical-Electronic Equipment Panel

012607181
621-1532-001: RNCC: 3 | RNVC: 2

4 Aug 1987

5975-01-340-1384
Cable Marker Sleeve

013401384
506658-35: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2885
Cable Marker Sleeve

013402885
506658-22: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-594-3076
Electrical-Electronic Equipment Chassis

015943076
ISK 300-65: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-5953
Cable Hanger

015945953
25324102: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-4389
Guide Rail

015944389
2530907: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-6888
Electrical Equipment Mounting Base

015946888
D9K38-00280: RNCC: 3 | RNVC: 2
919052-002: RNCC: 7 | RNVC: 2

25 Apr 2011

5975-01-594-8790
Cable Marker Sleeve

015948790
KTMS501-4(4): RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-5386
Electrical-Electronic Equipment Chassis

015945386
CISCO7609-S: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-552-3172
Electrical Equipment Mounting Base

015523172
719-5070-001: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-553-0575
Conduit Outlet

015530575
152A3010: RNCC: 3 | RNVC: 2

3 Jul 2007

5975-01-302-3918
Cable Marker Sleeve

013023918
676-0756-002: RNCC: 3 | RNVC: 2
10134294: RNCC: 6 | RNVC: 9

14 Jun 1989

5975-01-458-4457
Electrical-Electronic Equipment Chassis

014584457
00-358552-00001: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-01-458-8412
Junction Box Assembly

014588412
414E3639: RNCC: 3 | RNVC: 2

11 Sep 1998

5975-01-459-7312
Flexible Metal Conduit Assembly

014597312
227692-DL0000: RNCC: 3 | RNVC: 2

14 Oct 1998

5975-01-592-5731
Electrical-Electronic Equipment Chassis

015925731
779007-01: RNCC: 3 | RNVC: 2

11 Mar 2011

5975-01-592-5424
Electrical-Electronic Equipment Chassis

015925424
AT-MCF2000: RNCC: 3 | RNVC: 2

10 Mar 2011

5975-01-589-8122
Electrical-Electronic Equipment Chassis

015898122
K5010333: RNCC: 3 | RNVC: 2
K5010333: RNCC: 5 | RNVC: 2

5 Nov 2010

5975-01-592-7567
Cable Collar

015927567
RR679-3: RNCC: 3 | RNVC: 2

17 Mar 2011

5975-01-281-6172
Electrical Equipment Cabinet

012816172
CY-5250/ULM-503: RNCC: 3 | RNVC: 2
237179: RNCC: 5 | RNVC: 9

28 Jun 1988

5975-01-550-2758
Electrical Conduit Coupling

015502758
717-136XO: RNCC: 3 | RNVC: 2
717-136XO: RNCC: 5 | RNVC: 9

13 Apr 2007

5975-01-550-6808
Chassis Base

015506808
121512-2: RNCC: 3 | RNVC: 2

25 Apr 2007

5975-01-551-6250
Electrical-Electronic Equipment Chassis

015516250
93006A3003: RNCC: 3 | RNVC: 2

22 May 2007

5975-01-550-7720
Pole Platform

015507720
456556-01-700: RNCC: 3 | RNVC: 2
456556-01-700: RNCC: 5 | RNVC: 9

27 Apr 2007

5975-01-551-4079
Electrical-Electronic Equipment Panel

015514079
3096399-101: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-551-4230
Electronic Equipment Mounting Tray

015514230
8050504/G: RNCC: 3 | RNVC: 2
8050504D/B: RNCC: 5 | RNVC: 9
8050504C/A: RNCC: 5 | RNVC: 9

16 May 2007

5975-01-299-7632
Flexible Metal Conduit Assembly

012997632
750-011NF24-105: RNCC: 3 | RNVC: 2
200187-DI1050: RNCC: 3 | RNVC: 2
CH10-0340-183: RNCC: 5 | RNVC: 9
10250675-83: RNCC: 7 | RNVC: 2

5 May 1989

5975-01-301-0040
Ad Controller

013010040
59-103: RNCC: 3 | RNVC: 2

23 May 1989

5975-01-301-3566
Junction Box Assembly

013013566
1213D3706: RNCC: 3 | RNVC: 2
1213D3706: RNCC: 5 | RNVC: 9

27 May 1989

5975-01-300-8852
Electrical-Electronic Equipment Chassis

013008852
400014: RNCC: 3 | RNVC: 9

20 May 1989

5975-01-508-1993
Electrical Equipment Mounting Base

015081993
N1671D: RNCC: 3 | RNVC: 2
N1671D: RNCC: 3 | RNVC: 9

14 May 2003

5975-01-141-4946
Electrical-Electronic Equipment Chassis

011414946
0N312318: RNCC: 3 | RNVC: 2
C-11187/GYQ: RNCC: 5 | RNVC: 2

30 Oct 1982

5975-01-550-2094
Electrical-Electronic Equipment Chassis

015502094
12019-5010-01: RNCC: 3 | RNVC: 2

12 Apr 2007

5975-01-507-7556
Junction Box

015077556
EDC-06P-NH-LS: RNCC: 3 | RNVC: 2

5 May 2003

5975-01-507-9463
Electrical-Electronic Equipment Chassis

015079463
029333-MISC: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-248-8447
Blank Panel

012488447
0N507611-1: RNCC: 3 | RNVC: 2

31 Jan 1987

5975-01-140-1195
Electrical-Electronic Equipment Chassis

011401195
2674860-1: RNCC: 3 | RNVC: 2

8 Oct 1982

5975-01-621-2954
Junction Box

016212954
131202-1009: RNCC: 3 | RNVC: 9

30 Aug 2013

5975-01-590-5698
Electrical-Electronic Equipment Chassis

015905698
CSE-743T-665B: RNCC: 3 | RNVC: 2
B04371: RNCC: 5 | RNVC: 2

10 Dec 2010

5975-01-591-3474
Blank Panel

015913474
9967-6177: RNCC: 3 | RNVC: 2

21 Jan 2011

5975-01-590-6199
Electrical Equipment Drawer

015906199
40008887+001: RNCC: 3 | RNVC: 2

13 Dec 2010

5975-01-592-1166
Electronic Equipment Mounting Tray

015921166
M105034: RNCC: 3 | RNVC: 2
M105034: RNCC: 3 | RNVC: 9

22 Feb 2011

5975-01-277-1326
Dust And Moisture Seal Boot

012771326
2673263P4: RNCC: 3 | RNVC: 1

18 Apr 1988

5975-01-277-9464
Mount

012779464
6N2008: RNCC: 3 | RNVC: 2

29 Apr 1988

5975-01-599-1715
Electronic Equipment Mounting Tray

015991715
M103018: RNCC: 3 | RNVC: 2
M103018: RNCC: 3 | RNVC: 9

14 Sep 2011

5975-01-548-8105
Flexible Nonmetallic Conduit

015488105
6980767: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-00-705-7567
Electrical Box Connector

007057567
7057567: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-297-9754
Electrical-Electronic Equipment Chassis

012979754
0002-3600: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-298-1940
Electrical-Electronic Equipment Panel

012981940
1169120-1: RNCC: 3 | RNVC: 9
1169120-1: RNCC: C | RNVC: 1

13 Apr 1989

5975-01-506-9275
Blank Panel

015069275
4080916-0501: RNCC: 3 | RNVC: 2
4080916-0501: RNCC: 5 | RNVC: 2

14 Apr 2003

5975-01-244-6272
Electrical-Electronic Equipment Chassis

012446272
542-601067-000: RNCC: 3 | RNVC: 2

15 Nov 1986

5975-01-139-3406
Cable Marker Sleeve

011393406
TMS-SCE-1/4-2.0-S1-9: RNCC: 3 | RNVC: 1
215511T135: RNCC: 5 | RNVC: 2
TMS-SCE-1/4-2.0-S1-9: RNCC: 5 | RNVC: 2
RNF-100-1/4X13/16 WHITE: RNCC: 5 | RNVC: 9
215511T135: RNCC: 7 | RNVC: 2

29 Sep 1982

5975-01-008-5319
Electrical-Electronic Equipment Chassis

010085319
G354655: RNCC: 3 | RNVC: 9
G354655: RNCC: 5 | RNVC: 9
G354655: RNCC: C | RNVC: 1

25 Aug 1975

5975-01-618-6192
Electrical Equipment Rack

016186192
663478-B21: RNCC: 3 | RNVC: 2

30 Apr 2013

5975-01-618-0282
Electrical Components Tie Down Strap

016180282
MIL-001-894: RNCC: 3 | RNVC: 2

10 Apr 2013

5975-01-620-1917
Electronic Equipment Mounting Tray

016201917
978526-101: RNCC: 3 | RNVC: 2

9 Jul 2013

5975-00-392-5894
Chassis Base

003925894
MT589BARN12: RNCC: 3 | RNVC: 2
2Z6763-589: RNCC: 3 | RNVC: 2
1013-1: RNCC: 3 | RNVC: 2
MT589ARN12: RNCC: 5 | RNVC: 2
MT589ARN21: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-392-5933
Electrical Equipment Mounting Base

003925933
SCD34392: RNCC: 3 | RNVC: 2
114X1265: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-276-0152
Electrical Equipment Rack

012760152
0902-1502: RNCC: 3 | RNVC: 2

2 Apr 1988

5975-01-596-4901
Electrical Equipment Rack

015964901
020-0069: RNCC: 3 | RNVC: 2

18 May 2011

5975-01-596-9634
Electrical Conduit Union

015969634
E107312: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-598-0961
Electrical-Electronic Equipment Chassis

015980961
RM41300: RNCC: 3 | RNVC: 2

29 Jun 2011

5975-01-598-3636
Spec Cable Tie

015983636
2GL555: RNCC: 3 | RNVC: 2
2GL555: RNCC: 3 | RNVC: 9
2GL555: RNCC: 5 | RNVC: 2

25 Jul 2011

5975-00-702-6808
Electrical Cable Protector

007026808
7438430G1: RNCC: 3 | RNVC: 9
7438430G1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-504-7291
Electrical-Electronic Equipment Panel

015047291
145E2462-2: RNCC: 3 | RNVC: 2

6 Feb 2003

5975-01-504-7954
Conduit Outlet Cover

015047954
3502179-003: RNCC: 3 | RNVC: 2

10 Feb 2003

5975-01-248-9328
Electrical Equipment Cabinet

012489328
0N334043: RNCC: 3 | RNVC: 2
CY-8322(V)1/FYQ-107(V): RNCC: 5 | RNVC: 2

2 Feb 1987

5975-00-390-5751
Electrical Equipment Mounting Base

003905751
MT274CARN6BXR: RNCC: 3 | RNVC: 2
0R200263-4: RNCC: 3 | RNVC: 2
52F12985: RNCC: 3 | RNVC: 2
MT274CARN6: RNCC: 5 | RNVC: 1
707869-1: RNCC: 5 | RNVC: 2
52F12895: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-01-375-2777
Electrical-Electronic Equipment Panel

013752777
68037-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-9671
Electrical-Electronic Equipment Panel

013759671
30977-20: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-260-1096
Electrical-Electronic Equipment Panel

012601096
2439533-1: RNCC: 3 | RNVC: 2

25 Jul 1987

5975-01-614-9369
Electrical Equipment Mounting Base

016149369
HP XW4/Z2/Z4: RNCC: 3 | RNVC: 2

19 Dec 2012

5975-01-615-0220
Electrical-Electronic Equipment Panel

016150220
195D5441: RNCC: 3 | RNVC: 2

21 Dec 2012

5975-01-616-7728
Nonmetallic Raceway

016167728
2278133-1: RNCC: 3 | RNVC: 2
2278133-1: RNCC: 5 | RNVC: 2

27 Feb 2013

5975-00-346-6273
Electrical Box Connector

003466273
C23: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-372-2385
Electrical Equipment Mounting Base

013722385
10418: RNCC: 3 | RNVC: 2

4 Mar 1993

5975-01-373-3689
Electrical Conduit Coupling

013733689
6-1-6200-51: RNCC: 3 | RNVC: 9
6-1-6200-51: RNCC: C | RNVC: 1

2 Apr 1993

5975-01-594-5952
Cable Hanger

015945952
25324101: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-2884
Spec Voltage Box

015952884
117-139: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-8345
Conduit Outlet Cover

015948345
2527509: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-499-9700
Electrical-Electronic Equipment Chassis

014999700
0180702Y88: RNCC: 3 | RNVC: 2

8 Aug 2002

5975-01-500-9154
Electrical Fitting Mounting Base

015009154
654-0044-002: RNCC: 3 | RNVC: 2

16 Sep 2002

5975-01-501-5892
Electrical Equipment Cabinet

015015892
12461: RNCC: 3 | RNVC: 9
12461: RNCC: C | RNVC: 1

7 Oct 2002

5975-01-259-5227
Blade

012595227
8000-417L: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-205-0713
Heat Shrinkabl Boot

012050713
MIL-C-85049-68-12BC: RNCC: 3 | RNVC: 2

4 Apr 1985

5975-01-614-1719
Electrical Components Tie Down Strap

016141719
PRT4S-M3: RNCC: 3 | RNVC: 2
PRT4S-M3: RNCC: 5 | RNVC: 2

28 Nov 2012

5975-01-370-9857
Insulator Bracket Strap

013709857
176C2432: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-01-592-4019
Electrical-Electronic Equipment Panel

015924019
022-010307R01: RNCC: 3 | RNVC: 2

4 Mar 2011

5975-01-592-7128
Junction Box

015927128
A1614CHQR: RNCC: 3 | RNVC: 2
HOFA1614CHQR: RNCC: 5 | RNVC: 9

16 Mar 2011

5975-01-593-3440
Electrical Equipment Mounting Base

015933440
DE50: RNCC: 3 | RNVC: 2

6 Apr 2011

5975-01-498-7278
Rigid Metal Conduit Assembly

014987278
5HB71102-257: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-259-5230
Blade

012595230
8000-417Q: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-259-5222
Blade

012595222
8000-417G: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-259-5237
Blade

012595237
8000-417X: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-259-5218
Blade

012595218
8000-417DD: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-192-0720
Electrical-Electronic Equipment Chassis

011920720
812088-801: RNCC: 3 | RNVC: 2
812088: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-612-4208
Electrical Equipment Mounting Base

016124208
7-59005-2G: RNCC: 3 | RNVC: 2

11 Oct 2012

5975-01-613-1212
Elect Tiedown Strap

016131212
SST2I-9: RNCC: 3 | RNVC: 2
9D0254-1-8-9: RNCC: 5 | RNVC: 2

30 Oct 2012

5975-01-368-6026
Conduit Outlet Cover

013686026
10772323-001: RNCC: 3 | RNVC: 2

4 Dec 1992

5975-01-368-3386
Electrical Box Connector

013683386
2254: RNCC: 3 | RNVC: 2
BS-72101: RNCC: D | RNVC: 9

29 Nov 1992

5975-01-367-7057
Interconnecting Box

013677057
4000837-0503: RNCC: 3 | RNVC: 2

18 Nov 1992

5975-01-591-0165
Insulator Bracket

015910165
2862616: RNCC: 3 | RNVC: 2

6 Jan 2011

5975-01-592-3875
Electrical Equipment Rack

015923875
M986J: RNCC: 3 | RNVC: 2
14709A-23: RNCC: C | RNVC: 1

4 Mar 2011

5975-01-497-7458
Electrical Equipment Shelf

014977458
BA-356-SB: RNCC: 3 | RNVC: 2

3 Jun 2002

5975-01-498-6599
Rigid Metal Conduit

014986599
5HB71102-251: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-259-5229
Blade

012595229
8000-417N: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-258-6709
Ground Rod

012586709
149069-2: RNCC: 3 | RNVC: 2

6 Jul 1987

5975-01-610-8554
Electrical Equipment Rack

016108554
17P1E1590-501: RNCC: 3 | RNVC: 2

28 Aug 2012

5975-01-610-7673
Electrical-Electronic Equipment Chassis

016107673
JE698A: RNCC: 3 | RNVC: 2

28 Aug 2012

5975-01-611-4381
Electrical Equipment Mounting Base

016114381
DE-D-4083: RNCC: 3 | RNVC: 2
DE-D-4083A: RNCC: 3 | RNVC: 2

13 Sep 2012

5975-01-611-7203
Cable Marker Sleeve

016117203
PSPT-500-173: RNCC: 3 | RNVC: 2

24 Sep 2012

5975-01-365-1839
Electrical-Electronic Equipment Chassis

013651839
1974AS398-1: RNCC: 3 | RNVC: 2

2 Oct 1992

5975-01-368-4581
Junction Box

013684581
62828-90109-11: RNCC: 3 | RNVC: 2
1103-254: RNCC: 3 | RNVC: 2
1103-260: RNCC: 3 | RNVC: 2

1 Dec 1992

5975-01-589-1665
Electrical Equipment Cabinet

015891665
0N802183-2: RNCC: 3 | RNVC: 2

19 Oct 2010

5975-01-495-8421
Electrical-Electronic Equipment Chassis

014958421
546-6635-003: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-496-2714
Electrical-Electronic Equipment Chassis

014962714
757-8902-001: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-497-1679
Rigid Metal Conduit Assembly

014971679
75A602503-2001: RNCC: 3 | RNVC: 2

10 May 2002

5975-01-253-6681
Blank Panel

012536681
230-267-001: RNCC: 3 | RNVC: 9

23 Apr 1987

5975-01-608-4329
Electrical-Electronic Equipment Chassis

016084329
DC-SW/160-3: RNCC: 3 | RNVC: 9

27 Jun 2012

5975-01-607-8209
Electronic Equipment Mounting Tray

016078209
P0299: RNCC: 3 | RNVC: 2

15 Jun 2012

5975-01-608-1440
Rigid Metal Conduit

016081440
60008-230: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-608-0930
Average Cell Voltag

016080930
24KV: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-608-9196
Flexible Metal Conduit

016089196
750-031-56: RNCC: 3 | RNVC: 2

13 Jul 2012

5975-01-587-0533
Electrical-Electronic Equipment Chassis

015870533
A26980-000: RNCC: 3 | RNVC: 2

21 Jul 2010

5975-01-588-5437
Electrical-Electronic Equipment Chassis

015885437
SI-GT-CGC16: RNCC: 3 | RNVC: 2

23 Sep 2010

5975-01-587-8699
Electrical-Electronic Equipment Panel

015878699
68A770149-9WAA: RNCC: 3 | RNVC: 2

24 Aug 2010

5975-01-436-7500
Electrical-Electronic Equipment Chassis

014367500
415067: RNCC: 3 | RNVC: 2
415067: RNCC: 5 | RNVC: 9

26 Sep 1996

5975-01-260-7011
Blade

012607011
8000-417O: RNCC: 3 | RNVC: 2

4 Aug 1987

5975-01-155-9242
Electrical Standardized Components Case

011559242
16E1219-11: RNCC: 3 | RNVC: 2

16 Jun 1983

5975-01-164-0320
Electrical Equipment Mounting Base

011640320
792-6128-004: RNCC: 3 | RNVC: 2

12 Oct 1983

5975-00-947-9960
Electronic Junction Rack

009479960
AM3200T1: RNCC: 3 | RNVC: 2

30 Mar 1966

5975-00-948-9602
Service Fittings

009489602
G3S3: RNCC: 3 | RNVC: 9

6 Apr 1966

5975-01-606-8609
Electrical-Electronic Equipment Chassis

016068609
C99A9444-23: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-259-5239
Blade

012595239
8000-417Z: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-571-7475
Transmission Line Grounding Set

015717475
39J0218: RNCC: 3 | RNVC: 2

17 Feb 2009

5975-01-254-0107
Electrical-Electronic Equipment Chassis

012540107
34-054331-01: RNCC: 3 | RNVC: 2
52.0262.002.00: RNCC: 5 | RNVC: 2
34-054331-01: RNCC: 5 | RNVC: 9

29 Apr 1987

5975-01-265-2466
Electrical-Electronic Equipment Chassis

012652466
7126396-00: RNCC: 3 | RNVC: 2

10 Oct 1987

5975-01-265-3893
Electrical Equipment Cabinet Case

012653893
470694-1: RNCC: 3 | RNVC: 2

14 Oct 1987

5975-01-151-9089
Electrical Cable Support

011519089
616-4513-001: RNCC: 3 | RNVC: 2
616-4513-001: RNCC: 5 | RNVC: 2

23 Apr 1983

5975-01-547-0093
Electrical-Electronic Equipment Chassis

015470093
C8540-CHAS13: RNCC: 3 | RNVC: 2

10 Jan 2007

5975-01-605-7483
Stuffing Tube Plug

016057483
6718796: RNCC: 3 | RNVC: 2
6660646: RNCC: 5 | RNVC: 9

24 Apr 2012

5975-01-547-3359
Electrical Equipment Mounting Base

015473359
R548782-01: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-257-9200
Electronic Junction Rack

012579200
591628-3: RNCC: 3 | RNVC: 2
MRTB-4-239: RNCC: 5 | RNVC: 9
11437559-3: RNCC: 7 | RNVC: 2

25 Jun 1987

5975-01-259-5233
Blade

012595233
8000-417T: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-258-5568
Bushing

012585568
225446-1: RNCC: 3 | RNVC: 2

4 Jul 1987

5975-01-570-9854
Electrical Equipment Shelf

015709854
RASV190515BK1: RNCC: 3 | RNVC: 2
2200290-201: RNCC: 7 | RNVC: 2

21 Jan 2009

5975-01-571-3172
Electrical Cable Protector

015713172
BB4-300GM: RNCC: 3 | RNVC: 9
BB4-300GM: RNCC: 5 | RNVC: 9

30 Jan 2009

5975-01-570-6183
Cord Connector

015706183
87869: RNCC: 3 | RNVC: 2

7 Jan 2009

5975-01-570-5605
Electrical-Electronic Equipment Panel

015705605
CU-592-A: RNCC: 3 | RNVC: 2

6 Jan 2009

5975-01-569-7193
Electronic Equipment Mounting Tray

015697193
14711-11: RNCC: 3 | RNVC: 2
311-8063: RNCC: 5 | RNVC: 2
TY980: RNCC: 5 | RNVC: 2

8 Dec 2008

5975-01-570-2037
Electrical-Electronic Equipment Chassis

015702037
XTA-3000-2URK-19UZ: RNCC: 3 | RNVC: 2

17 Dec 2008

5975-01-570-6181
Telephone Cable Ide

015706181
PPC25X50F: RNCC: 3 | RNVC: 2

7 Jan 2009

5975-01-571-1487
Electrical Equipment Mounting Base

015711487
652-3232-001: RNCC: 3 | RNVC: 2

26 Jan 2009

5975-01-570-5558
Interconnecting Cabinet

015705558
PHR-100SU: RNCC: 3 | RNVC: 2

6 Jan 2009

5975-01-571-0395
Electrical-Electronic Equipment Chassis

015710395
ACP-2000P4-30ZE: RNCC: 3 | RNVC: 2

22 Jan 2009

5975-01-435-1429
Cable Marker Sleeve

014351429
M235A774-42: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-434-1482
Electrical Nonmetallic Conduit Assembly

014341482
901-516-1: RNCC: 3 | RNVC: 2
901-516-1: RNCC: 5 | RNVC: 2

22 Jul 1996

5975-00-801-5923
Electrical Box Connector

008015923
98T075: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-606-1002
Stuffing Tube.

016061002
2193129-1: RNCC: 3 | RNVC: 2

7 May 2012

5975-01-606-2684
Metallic Raceway Assembly

016062684
2213083-14: RNCC: 3 | RNVC: 2
2213083-14: RNCC: 3 | RNVC: 9

15 May 2012

5975-01-568-5209
Electrical Equipment Foot

015685209
341753-2: RNCC: 3 | RNVC: 2

3 Nov 2008

5975-01-570-1282
Strain Electrical Conductor Clamp

015701282
BACC10D618A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-569-8945
Cable Terminal Chamber

015698945
204-57433-5: RNCC: 3 | RNVC: 2

10 Dec 2008

5975-01-571-2722
Electrical Conduit Elbow

015712722
48815-020: RNCC: 3 | RNVC: 9

29 Jan 2009

5975-01-569-2356
Electrical Equipment Rack

015692356
E3664AC: RNCC: 3 | RNVC: 2
E3664AC: RNCC: 3 | RNVC: 9

24 Nov 2008

5975-01-434-1774
Cord Cover

014341774
CC-34: RNCC: 3 | RNVC: 2

22 Jul 1996

5975-01-216-8288
Electrical Equipment Mounting Base

012168288
18-61220-1: RNCC: 3 | RNVC: 9
18-61220-1: RNCC: C | RNVC: 1

17 Sep 1985

5975-01-219-9458
Bushing

012199458
10-163048: RNCC: 3 | RNVC: 2

5 Nov 1985

5975-00-797-4698
Cab Marker Band Set

007974698
AF34-66: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-544-3567
Electrical Equipment Rack

015443567
RMK250A: RNCC: 3 | RNVC: 9

11 Oct 2006

5975-01-544-6897
Electrical Equipment Rack

015446897
5063-9243: RNCC: 3 | RNVC: 2
5063-9243: RNCC: 3 | RNVC: 9

19 Oct 2006

5975-01-544-2392
Electrical-Electronic Equipment Panel

015442392
214932: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-567-5068
Electrical-Electronic Equipment Chassis

015675068
5119390-1: RNCC: 3 | RNVC: 2

29 Sep 2008

5975-01-568-0071
Electronic Box

015680071
1100051: RNCC: 3 | RNVC: 2

16 Oct 2008

5975-01-433-1499
Electrical-Electronic Equipment Chassis

014331499
947567-1: RNCC: 3 | RNVC: 9

21 Jun 1996

5975-01-433-3563
Electrical Equipment Rack

014333563
071-04038-0001: RNCC: 3 | RNVC: 2
Z00.N7788481401TBM: RNCC: 5 | RNVC: 9

27 Jun 1996

5975-01-224-1698
Blank Panel

012241698
0077631402: RNCC: 3 | RNVC: 9
77631402: RNCC: 5 | RNVC: 9

13 Jan 1986

5975-01-541-4041
Electrical Components Tie Down Strap

015414041
PLT21-M: RNCC: 3 | RNVC: 2

26 Jun 2006

5975-01-542-1814
Electrical Tie Down Mounting Base

015421814
CB4022V4MCR6-750: RNCC: 3 | RNVC: 2

25 Jul 2006

5975-00-404-2513
Guy Kit

004042513
1C046: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-564-5013
Electrical Conduit Adapter

015645013
712GK116A1724C: RNCC: 3 | RNVC: 2

18 Jun 2008

5975-01-565-4482
Electrical Equipment Rack

015654482
13177-3200-01: RNCC: 3 | RNVC: 2

24 Jul 2008

5975-01-565-4495
Electrical Grounding Plate

015654495
EGGP: RNCC: 3 | RNVC: 2

24 Jul 2008

5975-00-632-7682
Electrical Cable Nipple

006327682
6327682: RNCC: 3 | RNVC: 2
5281603: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-430-5536
Electrical-Electronic Equipment Chassis

014305536
5002407-2: RNCC: 3 | RNVC: 2

1 May 1996

5975-00-849-3917
Junction Box

008493917
12X10X4 SC GREY STEEL NOKO: RNCC: 3 | RNVC: 9

22 Nov 1980

5975-01-538-6416
Electrical Equipment Rack

015386416
358254-B21: RNCC: 3 | RNVC: 2

28 Mar 2006

5975-01-539-0056
Electrical Equipment Rack

015390056
CHS-4: RNCC: 3 | RNVC: 2

6 Apr 2006

5975-01-540-5444
Electrical Cable Protector

015405444
611-3125: RNCC: 3 | RNVC: 2
3125B: RNCC: 5 | RNVC: 2

23 May 2006

5975-01-540-8912
Junction Box

015408912
RTL-4043A: RNCC: 3 | RNVC: 2

7 Jun 2006

5975-01-563-2494
Electrical Conduit Coupling

015632494
P050NGYA: RNCC: 3 | RNVC: 2

6 May 2008

5975-01-563-4192
Electrical Bushing

015634192
RX262: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-564-1792
Crossarm Brace

015641792
906331-01: RNCC: 3 | RNVC: 2

6 Jun 2008

5975-01-563-5460
Electrical-Electronic Equipment Chassis

015635460
C99A9429-1: RNCC: 3 | RNVC: 2
C99A9429-7: RNCC: 5 | RNVC: 1
1068504: RNCC: 5 | RNVC: 1

13 May 2008

5975-01-562-8021
Electrical Grounding Plate

015628021
1016BTB: RNCC: 3 | RNVC: 2

22 Apr 2008

5975-01-429-8204
Cable Marker Sleeve

014298204
N13714-050-009: RNCC: 3 | RNVC: 2

19 Apr 1996

5975-00-767-7945
Electrical Cable Nipple

007677945
7378478: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-784-4591
Electrical Components Tie Down Strap

007844591
TY15: RNCC: 3 | RNVC: 2
TY15: RNCC: 5 | RNVC: 2
422104: RNCC: 5 | RNVC: 2
347C212H05: RNCC: 5 | RNVC: 2
ES1837-2: RNCC: 5 | RNVC: 9
536-1354: RNCC: 5 | RNVC: 9
ES1837-2: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-538-0134
Flexible Metal Conduit Assembly

015380134
18547-4: RNCC: 3 | RNVC: 9
18547-4: RNCC: C | RNVC: 1

7 Mar 2006

5975-01-538-5916
Electrical Equipment Rack

015385916
376440-B21: RNCC: 3 | RNVC: 2

27 Mar 2006

5975-01-538-0396
Electrical-Electronic Equipment Chassis

015380396
030324-0002: RNCC: 3 | RNVC: 2

8 Mar 2006

5975-01-538-1160
Electrical Box Connector

015381160
25594: RNCC: 3 | RNVC: 9
25594: RNCC: C | RNVC: 1

10 Mar 2006

5975-01-538-0573
High Volta Box Assy

015380573
25254: RNCC: 3 | RNVC: 9
25254: RNCC: C | RNVC: 1

8 Mar 2006

5975-00-350-3122
Electrical Conduit Coupling Nut

003503122
383258: RNCC: 3 | RNVC: 9
18883994: RNCC: 5 | RNVC: 2
5215243: RNCC: 5 | RNVC: 2
18883994: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-376-4660
Rigid Nonmetallic Conduit

013764660
49415: RNCC: 3 | RNVC: 9

3 Jun 1993

5975-01-562-1433
Interconnecting Box Cover

015621433
34459: RNCC: 3 | RNVC: 2

31 Mar 2008

5975-01-561-6034
Guide Rail

015616034
103002291-002: RNCC: 3 | RNVC: 2

11 Mar 2008

5975-00-642-8937
Ground Rod

006428937
6-1-1912-21-48A: RNCC: 3 | RNVC: 9
PD380: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-426-5624
Electrical Bonding Ring

014265624
TRO7B1-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
TR07BI: RNCC: 5 | RNVC: 2
TR07BI: RNCC: 5 | RNVC: 9
TR07BI: RNCC: 5 | RNVC: 9

14 Mar 1996

5975-00-883-3574
Electrical Conduit Ferrule

008833574
6780820-11: RNCC: 3 | RNVC: 2
6780820-11: RNCC: 5 | RNVC: 2
6780820-11: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-536-2325
Flexible Metal Conduit Assembly

015362325
227756-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-0773
Flexible Metal Conduit Assembly

015360773
227699-DL0000: RNCC: 3 | RNVC: 2

19 Dec 2005

5975-01-536-1797
Flexible Metal Conduit Assembly

015361797
227707-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-373-9484
Electrical Conduit Elbow

013739484
6-2-2449: RNCC: 3 | RNVC: 9
6-2-2449: RNCC: C | RNVC: 1

13 Apr 1993

5975-01-542-0676
Electrical Equipment Mounting Base

015420676
0N697072: RNCC: 3 | RNVC: 2

20 Jul 2006

5975-01-542-2169
Electrical Components Tie Down Strap

015422169
TY24M-6: RNCC: 3 | RNVC: 2

26 Jul 2006

5975-01-543-3323
Electrical-Electronic Equipment Chassis

015433323
A5990-62002: RNCC: 3 | RNVC: 9

8 Sep 2006

5975-01-559-5531
Cable Terminal Chamber

015595531
60-716-0A: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-125-6774
Electrical Equipment Rack

011256774
MT-6199/URC: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-535-7120
Junction Box

015357120
032430: RNCC: 3 | RNVC: 2

8 Dec 2005

5975-01-535-3975
Cable Marker Sleeve

015353975
M235A774-152: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-535-9250
Flexible Metal Conduit

015359250
227638-DL0000: RNCC: 3 | RNVC: 2

14 Dec 2005

5975-01-372-3216
Electrical Equipment Mounting Base

013723216
DAA3222P501-247: RNCC: 3 | RNVC: 2

6 Mar 1993

5975-01-372-2381
Electrical Equipment Mounting Base

013722381
10102: RNCC: 3 | RNVC: 2
17B9E1000-503: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-541-4972
Interconnecting Box Cover

015414972
3203828: RNCC: 3 | RNVC: 2

28 Jun 2006

5975-01-540-9818
Electrical Tie Down Mounting Base

015409818
K4M-BLD: RNCC: 3 | RNVC: 2

9 Jun 2006

5975-00-519-6166
Ground Rod

005196166
MILR11461: RNCC: 4 | RNVC: 1

26 Feb 1973

5975-01-118-6989
Electrical Components Tie Down Strap

011186989
TY53MO: RNCC: 3 | RNVC: 2

9 Sep 1981

5975-01-534-6693
Circu Support Frame

015346693
11438328: RNCC: 3 | RNVC: 2
11438328: RNCC: 5 | RNVC: 1

28 Oct 2005

5975-01-535-1119
Electrical Equipment Rack

015351119
RMK19C: RNCC: 3 | RNVC: 9

15 Nov 2005

5975-01-533-5735
Boxzzconverterzzzzz

015335735
U000003924: RNCC: 3 | RNVC: 2

20 Sep 2005

5975-00-333-7201
Spacer Bar

003337201
P406842: RNCC: 3 | RNVC: 9
P406842: RNCC: 5 | RNVC: 9
P406842: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-540-5427
Junction Box

015405427
02-0710: RNCC: 3 | RNVC: 2

23 May 2006

5975-00-522-5552
Flexible Metal Conduit Assembly

005225552
5334403-510: RNCC: 3 | RNVC: 2
5334403-510: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5560
Flexible Metal Conduit Assembly

005225560
5334403-570: RNCC: 3 | RNVC: 2
5334403-570: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-504-8020
Electrical Box Connector

005048020
DHF338: RNCC: 3 | RNVC: 2
QB88432-1: RNCC: 5 | RNVC: 2
QB88432-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-853-5955
Electrical Components Tie Down Strap

008535955
1191: RNCC: 3 | RNVC: 2
1191: RNCC: 3 | RNVC: 9

22 Nov 1966

5975-01-531-5275
Junction Box

015315275
CB100: RNCC: 3 | RNVC: 2

13 Jul 2005

5975-01-536-3515
Flexible Metal Conduit Assembly

015363515
227696-DL0000: RNCC: 3 | RNVC: 2

29 Dec 2005

5975-01-536-7410
Electrical Equipment Leg

015367410
572F359G01: RNCC: 3 | RNVC: 2
572F359G01: RNCC: 3 | RNVC: 9

12 Jan 2006

5975-01-536-7409
Electrical Equipment Leg

015367409
572F358G01: RNCC: 3 | RNVC: 2
572F358G01: RNCC: 3 | RNVC: 9

12 Jan 2006

5975-01-537-2456
Electrical Equipment Rack

015372456
170-084-020: RNCC: 3 | RNVC: 2

31 Jan 2006

5975-01-538-0403
Electrical Equipment Rack

015380403
030668-0001: RNCC: 3 | RNVC: 2

8 Mar 2006

5975-01-537-8573
Blank Panel

015378573
07-09-06305: RNCC: 3 | RNVC: 2
MV VM-6: RNCC: 5 | RNVC: 9

28 Feb 2006

5975-01-539-0680
Electrical-Electronic Equipment Panel

015390680
470472: RNCC: 3 | RNVC: 2
89532436: RNCC: 5 | RNVC: 2
470171: RNCC: 5 | RNVC: 9

10 Apr 2006

5975-00-522-2466
Electrical Conduit Elbow

005222466
IBF1028: RNCC: 3 | RNVC: 2
IBF1028: RNCC: 5 | RNVC: 9

13 Jun 1969

5975-01-148-4431
Clip

011484431
DYN52: RNCC: 3 | RNVC: 9

5 Mar 1983

5975-00-752-4926
Elbow

007524926
7524926: RNCC: 3 | RNVC: 2

1 Jan 1960

Load More Results