What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 163 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 163 of 176

5975-01-563-4201
Electrical Bushing

015634201
RW309-9: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-562-6506
Electronic Equipment Mounting Tray

015626506
16E1712-23P: RNCC: 3 | RNVC: 2

15 Apr 2008

5975-01-563-4075
Electrical Bushing

015634075
RW309-10: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-564-8026
Electronic Equipment Mounting Tray

015648026
800007-1: RNCC: 3 | RNVC: 2

27 Jun 2008

5975-01-564-4060
Electrical-Electronic Equipment Chassis

015644060
S21A103: RNCC: 3 | RNVC: 9

16 Jun 2008

5975-01-358-0179
Electrical Grounding Plate

013580179
2948359-1: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-358-9934
Electrical Conduit Adapter

013589934
710AS002B1616: RNCC: 3 | RNVC: 2

27 May 1992

5975-01-358-9933
Electrical Conduit Adapter

013589933
710AS002B1416: RNCC: 3 | RNVC: 2

27 May 1992

5975-00-570-2938
Flexible Metal Conduit Assembly

005702938
10941169-1: RNCC: 3 | RNVC: 2
10941169-1: RNCC: 5 | RNVC: 2
10941169-1: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-381-8881
Electrical Components Tie Down Strap

013818881
AST20-5-C100: RNCC: 3 | RNVC: 2
AST20-5-C100: RNCC: 5 | RNVC: 2
SS-6942: RNCC: D | RNVC: 9

23 Oct 1993

5975-01-383-1872
Electrical Conduit Bushing

013831872
461558: RNCC: 3 | RNVC: 2

19 Nov 1993

5975-01-383-3302
Electrical-Electronic Equipment Chassis

013833302
1505-1200-006: RNCC: 3 | RNVC: 2
1505-1200-005: RNCC: 5 | RNVC: 9
1505-1200-003: RNCC: 5 | RNVC: 9

22 Nov 1993

5975-01-600-4765
Electrical-Electronic Equipment Panel

016004765
CA35146-001: RNCC: 3 | RNVC: 2

2 Dec 2011

5975-01-357-4238
Electrical-Electronic Equipment Chassis

013574238
5033107-1: RNCC: 3 | RNVC: 2

23 Apr 1992

5975-01-034-3198
Electrical Conduit Elbow

010343198
795-145: RNCC: 3 | RNVC: 2
0795-145: RNCC: 5 | RNVC: 2

24 Jan 1977

5975-01-505-9496
Electrical Conduit Coupling

015059496
GW9984: RNCC: 3 | RNVC: 2

19 Mar 2003

5975-01-506-4698
Electrical Equipment Cabinet

015064698
1979349 (1): RNCC: 3 | RNVC: 2

31 Mar 2003

5975-01-552-3154
Electrical-Electronic Equipment Chassis

015523154
5946392: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-552-3774
Electrical-Electronic Equipment Chassis

015523774
145220-01: RNCC: 3 | RNVC: 2

12 Jun 2007

5975-01-553-3752
Electrical Equipment Mounting Base

015533752
2001290-009: RNCC: 3 | RNVC: 2

13 Jul 2007

5975-01-413-7840
Electrical-Electronic Equipment Chassis

014137840
8500716-902: RNCC: 3 | RNVC: 2

23 May 1995

5975-01-355-7846
Electrical Equipment Foot

013557846
5322 462 10222: RNCC: 3 | RNVC: 2

24 Mar 1992

5975-01-355-1596
Junction Box

013551596
AB-664HC: RNCC: 3 | RNVC: 2

12 Mar 1992

5975-01-355-8401
Interconnecting Cabinet

013558401
7333849G2: RNCC: 3 | RNVC: 9
7333849G1: RNCC: 5 | RNVC: 9

25 Mar 1992

5975-00-573-3324
Electrical Equipment Mounting Base

005733324
522-2531-005: RNCC: 3 | RNVC: 2
MT-2976/PRC-41: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-981-0926
Ible No-6 Fle Cable

009810926
105834: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-505-3147
Electrical Equipment Rack

015053147
8861695: RNCC: 3 | RNVC: 2

3 Mar 2003

5975-01-505-3152
Electrical Equipment Rack

015053152
8861699: RNCC: 3 | RNVC: 2

3 Mar 2003

5975-01-547-9655
Electrical-Electronic Equipment Chassis

015479655
10535-3010-13: RNCC: 3 | RNVC: 2

5 Feb 2007

5975-01-281-9557
Junction Box Assembly

012819557
5520752: RNCC: 3 | RNVC: 2

5 Jul 1988

5975-01-591-2103
Electrical Equipment Cabinet

015912103
7700-5387: RNCC: 3 | RNVC: 2

14 Jan 2011

5975-01-595-2427
Electrical Cable Protector

015952427
5447-04-0006: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-3186
Electrical Components Tie Down Strap

015943186
UCT3S-X0: RNCC: 3 | RNVC: 2
4800679: RNCC: 5 | RNVC: 2
UCT3S-X0: RNCC: 5 | RNVC: 9

25 Apr 2011

5975-01-596-2953
Switch Box Case

015962953
017587-2: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-411-4725
Electrical Equipment Rack

014114725
806742-5: RNCC: 3 | RNVC: 2

24 Mar 1995

5975-01-354-7914
Electrical Equipment Rack

013547914
000828501: RNCC: 3 | RNVC: 9
89416679: RNCC: 5 | RNVC: 2
89416679: RNCC: 5 | RNVC: 9

6 Mar 1992

5975-01-502-9661
Electrical Equipment Cabinet

015029661
97-358-B: RNCC: 3 | RNVC: 2

26 Nov 2002

5975-01-503-9862
Shelf Assembly Md

015039862
7-511171036-31: RNCC: 3 | RNVC: 2

15 Jan 2003

5975-01-504-0694
Electrical Equipment Mounting Base

015040694
527-12505-8: RNCC: 3 | RNVC: 2

16 Jan 2003

5975-01-545-3566
Electrical Equipment Cabinet

015453566
884780-1: RNCC: 3 | RNVC: 2

9 Nov 2006

5975-01-544-2745
Junction Box

015442745
A-A-59214: RNCC: 4 | RNVC: 1
SYM406.3: RNCC: 5 | RNVC: 1
303-7526524ITEM13: RNCC: D | RNVC: 9

10 Oct 2006

5975-01-544-2389
Electrical-Electronic Equipment Chassis

015442389
211797: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-588-6719
Electrical Equipment Rack

015886719
290917-1: RNCC: 3 | RNVC: 2

29 Sep 2010

5975-01-589-4696
Electrical Equipment Mounting Base

015894696
M053007-101: RNCC: 3 | RNVC: 2
M053007-101: RNCC: 3 | RNVC: 9

27 Oct 2010

5975-01-502-0832
Guide Rail

015020832
MDMT2: RNCC: 3 | RNVC: 2
5D0519-1: RNCC: 5 | RNVC: 2

24 Oct 2002

5975-01-492-0513
Electrical Equipment Cabinet

014920513
11002-5100-02: RNCC: 3 | RNVC: 2

13 Nov 2001

5975-01-542-3871
Electrical Box Connector

015423871
SHC1086: RNCC: 3 | RNVC: 2

3 Aug 2006

5975-01-541-4934
Electrical-Electronic Equipment Chassis

015414934
R3-48: RNCC: 3 | RNVC: 2

28 Jun 2006

5975-01-351-9825
Cable Strain Relief Bushing

013519825
1000-1446-001: RNCC: 3 | RNVC: 2
1000-1446-001: RNCC: 5 | RNVC: 9

17 Jan 1992

5975-01-352-0574
Electrical-Electronic Equipment Chassis

013520574
58944-1: RNCC: 3 | RNVC: 2

19 Jan 1992

5975-00-768-8910
Fanning Strip

007688910
S572101: RNCC: 3 | RNVC: 9
811: RNCC: 5 | RNVC: 2
811: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-004-6435
Electrical-Electronic Equipment Chassis

000046435
546-7428-004: RNCC: 3 | RNVC: 2

7 Jun 1972

5975-00-007-4505
Rigid Metal Conduit Assembly

000074505
53-65028-13: RNCC: 3 | RNVC: 2

30 Jun 1972

5975-01-500-2538
Aluminum Conductor Contact Paste

015002538
016-703700: RNCC: 3 | RNVC: 2

19 Aug 2002

5975-01-499-5177
Electrical Equipment Mounting Base

014995177
CB9131: RNCC: 3 | RNVC: 2
715972/AT5181A1119: RNCC: 5 | RNVC: 2

25 Jul 2002

5975-01-501-7602
Electrical Conduit Ferrule

015017602
SS-FER-14: RNCC: 3 | RNVC: 2

15 Oct 2002

5975-01-485-0797
Electrical Equipment Rack

014850797
106861003: RNCC: 3 | RNVC: 2

16 May 2001

5975-01-485-4404
Retainer-Stator

014854404
113655: RNCC: 3 | RNVC: 2
B-113655: RNCC: 5 | RNVC: 2

25 May 2001

5975-01-486-3970
Sp Conduit Assembly

014863970
310E060-3: RNCC: 3 | RNVC: 2

27 Jun 2001

5975-01-483-9905
Cable Marker Sleeve

014839905
2540806-54: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-487-5491
Electrical Conduit Elbow

014875491
1375-15-0026: RNCC: 3 | RNVC: 2
G95953: RNCC: D | RNVC: 9

9 Aug 2001

5975-01-488-1064
Rigid Metal Conduit Assembly

014881064
5HM40130-103: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-277-9479
Mount

012779479
6N2009: RNCC: 3 | RNVC: 2

29 Apr 1988

5975-01-278-2205
Electrical Components Tie Down Strap

012782205
SST1MC20: RNCC: 3 | RNVC: 2

3 May 1988

5975-01-277-9482
Mounting

012779482
6N2549: RNCC: 3 | RNVC: 2

29 Apr 1988

5975-01-648-8364
Junction Box Extension

016488364
284A3223-30: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-647-4930
Blank Panel

016474930
304A035-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-645-3350
Eprom

016453350
74434B66VER03: RNCC: 3 | RNVC: 1

11 Jun 2015

5975-01-645-2640
Eprom

016452640
74434B64K2VER02: RNCC: 3 | RNVC: 1

9 Jun 2015

5975-01-648-8365
Junction Box Extension

016488365
284A3223-29: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-407-7152
Electrical-Electronic Equipment Chassis

014077152
516586-01: RNCC: 3 | RNVC: 2
516586-01: RNCC: 3 | RNVC: 9

3 Feb 1995

5975-01-408-4557
Electrical Conduit Adapter

014084557
EMA0375-181-500: RNCC: 3 | RNVC: 2

16 Feb 1995

5975-01-408-5125
Electrical-Electronic Equipment Chassis

014085125
754372C: RNCC: 3 | RNVC: 2
754372B: RNCC: 5 | RNVC: 9

17 Feb 1995

5975-01-408-9396
Electrical Equipment Rack

014089396
8519599-901: RNCC: 3 | RNVC: 2

1 Mar 1995

5975-01-498-6597
Rigid Metal Conduit Assembly

014986597
5HB71101-211: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-499-3843
Electron Wall Mount

014993843
8805-000002: RNCC: 3 | RNVC: 2

22 Jul 2002

5975-01-499-5802
Stuffing Tube

014995802
17P6E2022-503: RNCC: 3 | RNVC: 2

29 Jul 2002

5975-01-499-1555
Electrical Fitting Mounting Base

014991555
10249-3005: RNCC: 3 | RNVC: 2

15 Jul 2002

5975-01-499-1514
Electrical Components Tie Down Strap

014991514
10249-1016: RNCC: 3 | RNVC: 2

15 Jul 2002

5975-01-498-3254
Blank Panel

014983254
988-9588-001: RNCC: 3 | RNVC: 2

21 Jun 2002

5975-01-274-4850
Electrical Components Tie Down Strap

012744850
346-0143-00: RNCC: 3 | RNVC: 2

9 Mar 1988

5975-01-641-3441
Electrical Equipment Rack

016413441
3362436-1: RNCC: 3 | RNVC: 2
3362436: RNCC: 7 | RNVC: 2

16 Jan 2015

5975-01-642-4678
Cable Reinforcing Link

016424678
25UM1011A: RNCC: 3 | RNVC: 2
25UM1011A: RNCC: 3 | RNVC: 9

26 Feb 2015

5975-01-406-1900
Junction Box

014061900
E365D: RNCC: 3 | RNVC: 9
00034881065711: RNCC: 5 | RNVC: 9
00034481065715: RNCC: 5 | RNVC: 9

23 Dec 1994

5975-01-349-3062
Electrical Conduit Elbow

013493062
21-0376: RNCC: 3 | RNVC: 2

23 Nov 1991

5975-01-497-0720
Raid Tray Assembly

014970720
97008B4330: RNCC: 3 | RNVC: 2

8 May 2002

5975-01-497-6895
Electrical-Electronic Equipment Chassis

014976895
MSL5026DLX 0DR RM: RNCC: 3 | RNVC: 2
231979-B21: RNCC: 5 | RNVC: 9

30 May 2002

5975-01-496-9316
Electrical-Electronic Equipment Chassis

014969316
775-2841-001: RNCC: 3 | RNVC: 2

1 May 2002

5975-01-498-8744
Rigid Metal Conduit

014988744
5HM40133-105: RNCC: 3 | RNVC: 2

2 Jul 2002

5975-01-497-8845
Electrical Equipment Rack

014978845
28-172-200: RNCC: 3 | RNVC: 2

6 Jun 2002

5975-01-496-7906
Interconnecting Box

014967906
101619986: RNCC: 3 | RNVC: 2

26 Apr 2002

5975-01-496-2819
Electrical-Electronic Equipment Chassis

014962819
635-8765-002: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-498-5546
Flexible Metal Conduit

014985546
5PTC0028-1-016: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-499-5843
Stuffing Tube

014995843
17P6E2022-507: RNCC: 3 | RNVC: 2

29 Jul 2002

5975-01-499-7491
Electrical Tie Down Mounting Base

014997491
PBMSH25-MO: RNCC: 3 | RNVC: 2
724839004900: RNCC: 5 | RNVC: 2

1 Aug 2002

5975-01-273-5160
Permuter Plug Cover Assy

012735160
0N047416: RNCC: 3 | RNVC: 2

26 Feb 1988

5975-01-346-3469
Cable Hanger

013463469
TAS100R: RNCC: 3 | RNVC: 2

4 Oct 1991

5975-01-347-3258
Electrical-Electronic Equipment Chassis

013473258
8040003363-01: RNCC: 3 | RNVC: 9

19 Oct 1991

5975-01-347-5893
Frame

013475893
NLN5299B: RNCC: 3 | RNVC: 9

25 Oct 1991

5975-01-496-0866
Electrical-Electronic Equipment Chassis

014960866
687-3791-002: RNCC: 3 | RNVC: 2

2 Apr 2002

5975-01-496-2776
Electrical-Electronic Equipment Chassis

014962776
757-3421-002: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-485-4107
Electronic Equipment Mounting Tray

014854107
09-2757055-205: RNCC: 3 | RNVC: 2

24 May 2001

5975-01-470-2997
Flexible Metal Conduit Assembly

014702997
230742-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-553: RNCC: 7 | RNVC: 2

14 Dec 1999

5975-01-492-0552
Electrical-Electronic Equipment Chassis

014920552
66910605-9: RNCC: 3 | RNVC: 2

13 Nov 2001

5975-01-492-5356
Electrical Equipment Rack

014925356
6237100-101: RNCC: 3 | RNVC: 2

3 Dec 2001

5975-01-476-7278
Electrical Tie Down Mounting Base

014767278
TM1S4-M: RNCC: 3 | RNVC: 2

20 Jul 2000

5975-01-480-8913
Electrical Equipment Rack

014808913
SA7X: RNCC: 3 | RNVC: 2

8 Dec 2000

5975-01-493-7476
Electrical Components Tie Down Strap

014937476
602445: RNCC: 3 | RNVC: 2

16 Jan 2002

5975-01-494-3814
Transmission Line Grounding Set

014943814
1215771-301: RNCC: 3 | RNVC: 2

11 Feb 2002

5975-01-496-2722
Electrical-Electronic Equipment Chassis

014962722
757-8908-001: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-345-8094
Electrical Tie Down Mounting Base

013458094
3593: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-346-4497
Electrical-Electronic Equipment Panel

013464497
4044489-0001: RNCC: 3 | RNVC: 2

5 Oct 1991

5975-01-494-4043
Electrical Components Tie Down Strap

014944043
865101-01: RNCC: 3 | RNVC: 2

11 Feb 2002

5975-01-495-0781
Insulator Bracket

014950781
3306004: RNCC: 3 | RNVC: 2

6 Mar 2002

5975-01-495-0223
Electrical Components Tie Down Strap

014950223
MS3367-6-9: RNCC: 3 | RNVC: 2

4 Mar 2002

5975-01-469-8133
Electrical Equipment Rack

014698133
C200HW-BI051: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-470-7971
Junction Box Cover

014707971
068137-5: RNCC: 3 | RNVC: 2

10 Jan 2000

5975-01-481-8747
Electrical-Electronic Equipment Panel

014818747
123AV51601-3: RNCC: 3 | RNVC: 2
123AV51601-3: RNCC: 5 | RNVC: 9

30 Jan 2001

5975-01-398-4701
Electrical Wall Plate

013984701
P14X: RNCC: 3 | RNVC: 2

4 Nov 1994

5975-01-343-4896
Electrical-Electronic Equipment Panel

013434896
208132-101: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-4897
Electrical-Electronic Equipment Panel

013434897
208140-101: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-4892
Electrical-Electronic Equipment Panel

013434892
208120-101: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-5092
Electrical Equipment Cabinet

013435092
24597-1: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-4895
Electrical-Electronic Equipment Panel

013434895
208131-101: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-9491
Insulator Bracket

013439491
718976-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-344-1430
Electrical Conduit Wye

013441430
A902AX0910DA/18: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-343-9342
Electrical-Electronic Equipment Chassis

013439342
765302-4: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9267
Ground Rod Section

013439267
874475: RNCC: 3 | RNVC: 9

20 Aug 1991

5975-01-344-1578
Flexible Nonmetallic Conduit

013441578
10085-5156: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-493-6994
Electrical Grounding Plate

014936994
4254508-2: RNCC: 3 | RNVC: 2
4254508-2: RNCC: 5 | RNVC: 2

15 Jan 2002

5975-01-413-1739
Conduit Outlet Cover

014131739
E9G2DS: RNCC: 3 | RNVC: 9

7 May 1995

5975-01-414-8774
Insulator Bracket

014148774
159504: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-00-527-9656
Electrical Wall Plate

005279656
97072: RNCC: 3 | RNVC: 2

28 Aug 1974

5975-01-626-8138
Electrical Components Tie Down Strap

016268138
70043762: RNCC: 3 | RNVC: 2
A04081964: RNCC: 5 | RNVC: 2
BT6LH-L0: RNCC: 5 | RNVC: 2
A04081964: RNCC: 5 | RNVC: 2

20 Mar 2014

5975-01-626-4189
Electrical-Electronic Equipment Panel

016264189
734-65319-1: RNCC: 3 | RNVC: 2
734-65319: RNCC: D | RNVC: 9

10 Mar 2014

5975-01-629-6059
Prom Flash

016296059
216C9885VER02: RNCC: 3 | RNVC: 1

8 Jul 2014

5975-01-397-8659
Rigid Metal Conduit

013978659
1310-0101-19: RNCC: 3 | RNVC: 2
1310-0101-19: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-396-6078
Electrical Equipment Cabinet

013966078
1317: RNCC: 3 | RNVC: 9

22 Sep 1994

5975-01-397-4479
Electrical Conduit Coupling

013974479
DT3360: RNCC: 3 | RNVC: 2

11 Oct 1994

5975-01-397-7757
Rigid Metal Conduit

013977757
1310-0101-16: RNCC: 3 | RNVC: 2
1310-0101-16: RNCC: 5 | RNVC: 9

20 Oct 1994

5975-01-342-1516
Electrical-Electronic Equipment Panel

013421516
30757-101: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-6003
Junction Box

013426003
24909: RNCC: 3 | RNVC: 9

29 Jul 1991

5975-01-342-2245
Slide Track

013422245
1502770: RNCC: 3 | RNVC: 2

17 Jul 1991

5975-01-451-7447
Electrical Conduit Coupling

014517447
GW9116: RNCC: 3 | RNVC: 2

30 Dec 1997

5975-01-412-0666
Interlock Bypass Tool Assembly

014120666
161C755G01: RNCC: 3 | RNVC: 2

10 Apr 1995

5975-01-622-6351
Interior Cable Rack

016226351
CMR19X84S: RNCC: 3 | RNVC: 2

16 Oct 2013

5975-01-625-1935
Stuffing Tube

016251935
CRST010050046: RNCC: 3 | RNVC: 2
CRST010050046: RNCC: 5 | RNVC: 2

28 Jan 2014

5975-01-624-5973
Rigid Metal Conduit Assembly

016245973
68A250649-2083: RNCC: 3 | RNVC: 2

8 Jan 2014

5975-01-394-6748
Electrical Equipment Shelf

013946748
10822-005: RNCC: 3 | RNVC: 2

12 Aug 1994

5975-01-395-7019
Electronic Equipment Mounting Tray

013957019
47-0440-00: RNCC: 3 | RNVC: 2

2 Sep 1994

5975-01-451-1580
Interconnecting Box

014511580
51388: RNCC: 3 | RNVC: 2

5 Dec 1997

5975-00-521-4924
Electric Co Cabinet

005214924
X2298: RNCC: 3 | RNVC: 9

16 Aug 1974

5975-01-348-5851
Junction Box Cover

013485851
2838140: RNCC: 3 | RNVC: 2

13 Nov 1991

5975-01-349-3077
Flexible Metal Conduit

013493077
010100-HP0250: RNCC: 3 | RNVC: 2
101-0250: RNCC: 5 | RNVC: 9

23 Nov 1991

5975-01-619-3762
Electrical Equipment Rack

016193762
SR25UBTAA: RNCC: 3 | RNVC: 2

29 May 2013

5975-01-393-3496
Electrical Nonmetallic Conduit Assembly

013933496
5493230-009: RNCC: 3 | RNVC: 2
5493230-009: RNCC: 5 | RNVC: 2

18 Jul 1994

5975-01-465-5375
Electrical Equipment Foot

014655375
10208-1073-01: RNCC: 3 | RNVC: 2

11 Jun 1999

5975-01-466-4690
Electrical Grounding Plate

014664690
425298-1: RNCC: 3 | RNVC: 2

20 Jul 1999

5975-01-465-8030
Flexible Metal Conduit Assembly

014658030
S6162-63806-8: RNCC: 3 | RNVC: 2

22 Jun 1999

5975-01-466-2014
Junction Box

014662014
24400-02: RNCC: 3 | RNVC: 2

9 Jul 1999

5975-00-738-0210
Rigid Metal Conduit Assembly

007380210
NAF1150-4A142: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-448-4805
Panelmate Plus

014484805
MM-PM10-200: RNCC: 3 | RNVC: 9

29 Aug 1997

5975-01-449-2195
Junction Box

014492195
213241-FK6400: RNCC: 3 | RNVC: 2
11450704-1: RNCC: 7 | RNVC: 2

23 Sep 1997

5975-01-509-1927
Flexible Metal Conduit

015091927
34238: RNCC: 3 | RNVC: 1
401-7525883ITEM47: RNCC: D | RNVC: 9

16 Jun 2003

5975-01-514-7262
Electrical Grounding Plate

015147262
11460186: RNCC: 3 | RNVC: 2

3 Nov 2003

5975-01-345-7906
Electrical Conduit Adapter

013457906
151469-0002/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-346-4563
Electrical Components Tie Down Strap

013464563
PLT2S-MP: RNCC: 3 | RNVC: 2

5 Oct 1991

5975-01-048-7729
Electrical Components Tie Down Strap

010487729
10S300-2-35: RNCC: 3 | RNVC: 9
10S300-2-35: RNCC: C | RNVC: 1

3 Oct 1977

5975-01-052-7587
Electrical Equipment Mounting Base

010527587
706521-801: RNCC: 3 | RNVC: 2
MT-4984/ARC-164: RNCC: 5 | RNVC: 2

20 Dec 1977

5975-01-054-5266
Tie Cable

010545266
SST-3: RNCC: 3 | RNVC: 2

21 Jan 1978

5975-01-055-9755
Electrical Conductor Bushing

010559755
620-1644: RNCC: 3 | RNVC: 9

15 Feb 1978

5975-01-580-2794
Electronic Equipment Mounting Tray

015802794
3228-0013-03-1: RNCC: 3 | RNVC: 2

9 Dec 2009

5975-01-580-6034
Electrical-Electronic Equipment Chassis

015806034
192692-01: RNCC: 3 | RNVC: 2

19 Dec 2009

5975-01-581-7471
Junction Box

015817471
01236011: RNCC: 3 | RNVC: 2

27 Jan 2010

5975-01-585-2416
Electronic Equipment Mounting Tray

015852416
403072: RNCC: 3 | RNVC: 2

20 May 2010

5975-01-585-3273
Electrical Components Tie Down Strap

015853273
TYHT27M: RNCC: 3 | RNVC: 2

24 May 2010

5975-01-586-8714
Flexible Metal Conduit

015868714
750-069-32-E: RNCC: 3 | RNVC: 2

16 Jul 2010

5975-01-586-3215
Electronic Equipment Mounting Tray

015863215
MT6-3319-101: RNCC: 3 | RNVC: 2

24 Jun 2010

5975-01-391-7484
Electrical Cable Support

013917484
67F4013: RNCC: 3 | RNVC: 2

16 Jun 1994

5975-01-393-0144
Blank Panel

013930144
214C1027P2: RNCC: 3 | RNVC: 2

12 Jul 1994

5975-01-392-4169
Junction Box

013924169
ZT37-70-44-EE: RNCC: 3 | RNVC: 2
DAA7294D016-001: RNCC: 3 | RNVC: 2

29 Jun 1994

5975-00-854-2654
Electrical-Electronic Equipment Chassis

008542654
1064221-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-056-7569
Cable Marker Sleeve

010567569
ST650713A1A17: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

28 Feb 1978

5975-01-056-7568
Cable Marker Sleeve

010567568
ST650713A1A19: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

28 Feb 1978

5975-01-053-3133
Transition Conduit

010533133
CRN2647: RNCC: 3 | RNVC: 2

1 Jan 1978

5975-01-468-6021
Air Splitter

014686021
203170-1: RNCC: 3 | RNVC: 2

15 Oct 1999

5975-01-344-9037
Electrical Equipment Mounting Base

013449037
3198247: RNCC: 3 | RNVC: 2
3198247: RNCC: 3 | RNVC: 9

8 Sep 1991

5975-01-344-9760
Chassis Base

013449760
67-03866-003: RNCC: 3 | RNVC: 2

8 Sep 1991

5975-01-577-5406
Electrical-Electronic Equipment Chassis

015775406
CPSMC1800-200: RNCC: 3 | RNVC: 2
CPSMC1800-200: RNCC: 5 | RNVC: 2
160-026180-G001: RNCC: 5 | RNVC: 2
CPSMC1800-200: RNCC: 5 | RNVC: 9

10 Sep 2009

5975-01-578-5420
Electronic Equipment Mounting Tray

015785420
MT4-8329-101: RNCC: 3 | RNVC: 2
MT4-8329-101: RNCC: 5 | RNVC: 2

9 Oct 2009

5975-01-446-1225
Junction Box

014461225
10674149: RNCC: 3 | RNVC: 2

23 Jun 1997

5975-01-445-4199
Electrical Equipment Rack

014454199
1261AH OPT.S-1464,71: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-575-1766
Electrical Equipment Mounting Base

015751766
93A291: RNCC: 3 | RNVC: 2
704A35402051: RNCC: 5 | RNVC: 2

23 Jun 2009

5975-01-574-3381
Nonmetallic Raceway

015743381
1820M28G02: RNCC: 3 | RNVC: 2

26 May 2009

5975-01-461-2913
Electrical Equipment Mounting Base

014612913
11465389: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-461-5343
Electrical-Electronic Equipment Chassis

014615343
10535-5000-01: RNCC: 3 | RNVC: 2

16 Dec 1998

5975-01-460-9823
Electrical Equipment Mounting Base

014609823
390012: RNCC: 3 | RNVC: 2

23 Nov 1998

5975-01-462-4855
Raceway Cover

014624855
HBLTT5: RNCC: 3 | RNVC: 2

4 Feb 1999

5975-01-462-4636
Flexible Metal Conduit Assembly

014624636
17BE2000-565: RNCC: 3 | RNVC: 2
230744-DL0000: RNCC: 3 | RNVC: 2

4 Feb 1999

5975-01-461-9406
Electrical Equipment Rack

014619406
101259058-002: RNCC: 3 | RNVC: 2

12 Jan 1999

5975-00-045-6704
Flexible Metal Conduit Assembly

000456704
C4P10245-11: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-443-3051
Blank Panel

014433051
40103A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-444-6481
Electrical Components Tie Down Strap

014446481
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-7-5: RNCC: 3 | RNVC: 2
MS3367-7-5: RNCC: 5 | RNVC: 9

13 May 1997

5975-01-463-4837
Flexible Metal Conduit

014634837
8212-16: RNCC: 3 | RNVC: 2
8212: RNCC: D | RNVC: 9

24 Mar 1999

5975-01-463-9869
Electrical-Electronic Equipment Chassis

014639869
795R680G01: RNCC: 3 | RNVC: 2
795R680G01: RNCC: 5 | RNVC: 2

12 Apr 1999

5975-01-342-6048
Cable Marker Sleeve

013426048
651043-29: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6986
Electrical Cable Nipple

013426986
2542013-1: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-558-5817
Electrical Cable Protector

015585817
16104360-001: RNCC: 3 | RNVC: 2

14 Nov 2007

5975-01-559-4095
Electrical-Electronic Equipment Chassis

015594095
12V21RMX78N4VC9-B: RNCC: 3 | RNVC: 2

17 Dec 2007

5975-01-479-9676
Electrical Box Connector

014799676
688539: RNCC: 3 | RNVC: 2

2 Nov 2000

5975-01-388-9700
Electrical-Electronic Equipment Chassis

013889700
4-541041-01: RNCC: 3 | RNVC: 2

13 Apr 1994

5975-01-443-2398
Electrical Equipment Cabinet

014432398
SD-1017: RNCC: 3 | RNVC: 2

4 Apr 1997

5975-01-442-3051
Electrical-Electronic Equipment Panel

014423051
111-D6099-1: RNCC: 3 | RNVC: 2

11 Mar 1997

5975-01-442-4613
Electrical-Electronic Equipment Chassis

014424613
111-D6095-1: RNCC: 3 | RNVC: 2

14 Mar 1997

5975-01-459-6751
Electrical Equipment Rack

014596751
CMA14-20: RNCC: 3 | RNVC: 2

9 Oct 1998

5975-01-340-2882
Cable Marker Sleeve

013402882
506658-25: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2629
Electrical-Electronic Equipment Chassis

013402629
31880: RNCC: 3 | RNVC: 9

11 Jun 1991

5975-01-340-2775
Blank Panel

013402775
31454: RNCC: 3 | RNVC: 9

11 Jun 1991

5975-01-341-3541
Junction Box

013413541
100803: RNCC: 3 | RNVC: 9

27 Jun 1991

5975-01-043-1210
Blank Panel

010431210
0N047102: RNCC: 3 | RNVC: 2

19 Jun 1977

5975-01-551-0690
Electrical Equipment Rack

015510690
300-CS-216: RNCC: 3 | RNVC: 2

4 May 2007

5975-01-478-8619
Electrical-Electronic Equipment Chassis

014788619
20400382-001: RNCC: 3 | RNVC: 2

28 Sep 2000

5975-01-478-7641
Electrical Equipment Rack

014787641
KD84019-003: RNCC: 3 | RNVC: 2

26 Sep 2000

5975-01-459-3547
Electrical Equipment Mounting Base

014593547
MT-7150/TRN-41: RNCC: 3 | RNVC: 9
MT-7150/TRN-41: RNCC: 5 | RNVC: 9
MT-7150/TRN-41: RNCC: C | RNVC: 1

28 Sep 1998

5975-01-339-3729
Flexible Metal Conduit Assembly

013393729
910272: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-340-3748
Strap Assembly

013403748
3100207A040-022: RNCC: 3 | RNVC: 2
3100207A040-022: RNCC: 5 | RNVC: 2

12 Jun 1991

5975-01-455-7641
Raceway Cover

014557641
8902-1: RNCC: 3 | RNVC: 2

14 May 1998

5975-01-455-7314
Rigid Metal Conduit

014557314
8326-1: RNCC: 3 | RNVC: 2

13 May 1998

5975-01-456-7061
Electrical-Electronic Equipment Chassis

014567061
218F255: RNCC: 3 | RNVC: 2

23 Jun 1998

5975-01-456-4849
Electrical-Electronic Equipment Chassis

014564849
6902-5100: RNCC: 3 | RNVC: 2

15 Jun 1998

5975-01-457-1658
Electrical-Electronic Equipment Chassis

014571658
725072-801: RNCC: 3 | RNVC: 2
725072-801: RNCC: 8 | RNVC: 1

14 Jul 1998

5975-01-456-4705
Flexible Metal Conduit Assembly

014564705
227659-DL0000: RNCC: 3 | RNVC: 2

15 Jun 1998

5975-01-439-7576
Electrical-Electronic Equipment Panel

014397576
5223871-9: RNCC: 3 | RNVC: 2

18 Dec 1996

5975-01-439-3684
Electrical-Electronic Equipment Panel

014393684
165664-001: RNCC: 3 | RNVC: 2

5 Dec 1996

5975-01-440-7495
Electrical Equipment Mounting Base

014407495
TC824: RNCC: 3 | RNVC: 2

23 Jan 1997

5975-01-470-3699
Electronic Equipment Mounting Tray

014703699
4044071: RNCC: 3 | RNVC: 2

16 Dec 1999

5975-01-471-6382
Electrical Equipment Mounting Base

014716382
17P1E1481-1: RNCC: 3 | RNVC: 2

8 Feb 2000

5975-01-471-6583
Electrical Equipment Rack

014716583
HP5062-4840: RNCC: 3 | RNVC: 2
5062-4840: RNCC: 5 | RNVC: 9
5062-4840: RNCC: 5 | RNVC: 9
5062-4840: RNCC: C | RNVC: 1

9 Feb 2000

5975-01-471-0473
Stuffing Tube

014710473
630A007NF103H: RNCC: 3 | RNVC: 2

20 Jan 2000

5975-01-472-5914
Cable Marker Sleeve

014725914
605B798H08: RNCC: 3 | RNVC: 2
605B798H08: RNCC: 3 | RNVC: 9

9 Mar 2000

5975-01-472-2614
Electrical Equipment Mounting Base

014722614
12004-0100-01: RNCC: 3 | RNVC: 2

24 Feb 2000

5975-01-449-5750
Interconnecting Box

014495750
02-0649: RNCC: 3 | RNVC: 2
10617218: RNCC: 5 | RNVC: 2
99-0024: RNCC: 5 | RNVC: 9

6 Oct 1997

5975-01-449-8300
Electrical Equipment Mounting Base

014498300
16F2261-215: RNCC: 3 | RNVC: 2

16 Oct 1997

5975-01-452-0401
Junction Cover Assembly

014520401
3351132-1: RNCC: 3 | RNVC: 2

13 Jan 1998

5975-01-452-1798
Blank Panel

014521798
151-006298-101: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-339-3800
Electrical Conduit Adapter

013393800
900326: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-169-1920
Blank Panel

011691920
0N313318: RNCC: 3 | RNVC: 2

4 Jan 1984

5975-01-547-6850
Electrical Equipment Rack

015476850
AF002A: RNCC: 3 | RNVC: 2
AF002A: RNCC: 5 | RNVC: 2
AF002AR: RNCC: 5 | RNVC: 2
91938014: RNCC: 5 | RNVC: 2
10642 G2 (42U): RNCC: 5 | RNVC: 2
AF002AR: RNCC: 5 | RNVC: 2

29 Jan 2007

5975-01-476-5781
Electrical Equipment Cabinet

014765781
C-SD20166: RNCC: 3 | RNVC: 2

17 Jul 2000

5975-01-477-1035
Electrical-Electronic Equipment Chassis

014771035
CCHA162-2: RNCC: 3 | RNVC: 2

31 Jul 2000

5975-01-455-0205
Electrical-Electronic Equipment Panel

014550205
70-27049-01: RNCC: 3 | RNVC: 2

20 Apr 1998

5975-01-442-3049
Electrical-Electronic Equipment Panel

014423049
111-D6097-1: RNCC: 3 | RNVC: 2

11 Mar 1997

5975-01-336-7466
Electrical-Electronic Equipment Panel

013367466
258270-913: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-337-1509
Electrical Conduit Tee

013371509
370DX4: RNCC: 3 | RNVC: 2
370DX4: RNCC: 3 | RNVC: 9

10 Apr 1991

5975-01-472-4976
Electrical-Electronic Equipment Panel

014724976
3352099-7: RNCC: 3 | RNVC: 2

6 Mar 2000

5975-01-473-9320
Interconnecting Box

014739320
75A871653-1013: RNCC: 3 | RNVC: 2

19 Apr 2000

5975-01-452-9568
Electrical-Electronic Equipment Chassis

014529568
5010D22720-1: RNCC: 3 | RNVC: 9

13 Feb 1998

5975-00-817-3625
Electrical Conduit Coupling Nut

008173625
726405: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-818-2569
Cable Strain Relief Bushing

008182569
SR5K: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-419-0333
Elevation Platform

014190333
2002119-2: RNCC: 3 | RNVC: 2

12 Sep 1995

5975-01-439-6034
Electrical-Electronic Equipment Chassis

014396034
885907-1: RNCC: 3 | RNVC: 2
885907-1: RNCC: 5 | RNVC: 9

13 Dec 1996

5975-01-247-2082
Strain Electrical Conductor Clamp

012472082
G8353-16N: RNCC: 3 | RNVC: 2
25431-01972: RNCC: 5 | RNVC: 2
25431-01972: RNCC: 5 | RNVC: 9

29 Dec 1986

5975-01-419-2924
Conduit Outlet Cover

014192924
E98SRC: RNCC: 3 | RNVC: 9

18 Sep 1995

5975-01-419-4928
Electrical-Electronic Equipment Chassis

014194928
6702-0005-01: RNCC: 3 | RNVC: 2

22 Sep 1995

5975-01-421-8497
Stop And Receptacle

014218497
604AS295-11: RNCC: 3 | RNVC: 2

16 Nov 1995

5975-01-472-3692
Electronic Equipment Mounting Tray

014723692
HW-RDE-04: RNCC: 3 | RNVC: 2

29 Feb 2000

5975-01-472-3279
Electrical-Electronic Equipment Panel

014723279
K633320130: RNCC: 3 | RNVC: 9

28 Feb 2000

5975-01-471-7629
Electrical-Electronic Equipment Chassis

014717629
K5288: RNCC: 3 | RNVC: 2
5288: RNCC: 5 | RNVC: 9

14 Feb 2000

5975-01-452-8367
Electrical Cable Protector

014528367
728-119-001: RNCC: 3 | RNVC: 2
728-119-001: RNCC: 5 | RNVC: 9

10 Feb 1998

5975-01-452-4428
Electrical Equipment Mounting Base

014524428
404-38-S-0-0: RNCC: 3 | RNVC: 2

27 Jan 1998

5975-01-523-2108
Electrical-Electronic Equipment Chassis

015232108
3523300-6: RNCC: 3 | RNVC: 2

24 Aug 2004

5975-01-461-7743
Electrical-Electronic Equipment Chassis

014617743
X6600A: RNCC: 3 | RNVC: 2

1 Jan 1999

5975-01-463-4838
Flexible Metal Conduit

014634838
8212-17: RNCC: 3 | RNVC: 2
8212: RNCC: D | RNVC: 9

24 Mar 1999

5975-01-258-5807
Electrical-Electronic Equipment Chassis

012585807
4011624-901: RNCC: 3 | RNVC: 2

4 Jul 1987

5975-01-468-9252
Flexible Metal Conduit Assembly

014689252
254711: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-469-8123
Electrical Equipment Rack

014698123
C200HW-BC081: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-470-2758
Flexible Metal Conduit Assembly

014702758
226478-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-1: RNCC: 7 | RNVC: 2

13 Dec 1999

5975-01-451-9454
Cable Marker Sleeve

014519454
013-007382-016: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-452-1807
Box Outlet Assembly

014521807
389083-5: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-522-3658
Cable Marker Sleeve

015223658
65550-12023-105: RNCC: 3 | RNVC: 2

28 Jul 2004

5975-01-522-3659
Cable Marker Sleeve

015223659
65550-12023-106: RNCC: 3 | RNVC: 2

28 Jul 2004

5975-01-460-0595
Electrical Equipment Mounting Base

014600595
622-4333-001: RNCC: 3 | RNVC: 2

23 Oct 1998

5975-01-229-0208
Junction Box

012290208
152D5580: RNCC: 3 | RNVC: 2

24 Mar 1986

5975-01-426-2286
Strap Bonding Plate

014262286
621-7785-005: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-01-468-9231
Flexible Metal Conduit Assembly

014689231
254722: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-9257
Flexible Metal Conduit Assembly

014689257
254717: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-9240
Flexible Metal Conduit Assembly

014689240
254729: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-341-5428
Electrical Equipment Rack

013415428
03-03467-001: RNCC: 3 | RNVC: 2

1 Jul 1991

5975-01-451-2777
Electrical Equipment Shelf

014512777
13E2152-1: RNCC: 3 | RNVC: 2
13E2152-1: RNCC: 5 | RNVC: 9

11 Dec 1997

5975-01-451-8722
Electrical Tie Down Mounting Base

014518722
CB4020V3N6: RNCC: 3 | RNVC: 2
9D0271-101: RNCC: 3 | RNVC: 2

7 Jan 1998

5975-01-451-0592
Electrical-Electronic Equipment Chassis

014510592
240314-100: RNCC: 3 | RNVC: 2
240314-100: RNCC: 5 | RNVC: 9

3 Dec 1997

5975-01-451-0964
Electrical-Electronic Equipment Chassis

014510964
11441983: RNCC: 3 | RNVC: 2

4 Dec 1997

5975-00-842-5255
Electrical Components Tie Down Strap

008425255
MS3367-2-5: RNCC: 2 | RNVC: 2
SST4SC5: RNCC: 5 | RNVC: 1
TY28M5: RNCC: 5 | RNVC: 1
TY28M5: RNCC: 5 | RNVC: 1
SSM4-5: RNCC: 5 | RNVC: 9

23 Dec 1966

5975-00-843-2585
Electrical Equipment Mounting Base

008432585
522-3062-003: RNCC: 3 | RNVC: 2

18 Sep 1967

5975-00-098-3378
Ground Rod

000983378
8103998: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-520-5424
Junction Box

015205424
377-07274-000: RNCC: 3 | RNVC: 2
377-07274-000: RNCC: 5 | RNVC: 2

14 May 2004

5975-01-520-5427
Junction Box

015205427
377-07358-000: RNCC: 3 | RNVC: 2
377-07358-000: RNCC: 5 | RNVC: 2

14 May 2004

5975-01-519-7890
Electrical Components Tie Down Strap

015197890
TY-23M-HAT: RNCC: 3 | RNVC: 2

30 Apr 2004

5975-01-521-3634
Electrical-Electronic Equipment Chassis

015213634
G000809-20CL: RNCC: 3 | RNVC: 2

18 Jun 2004

5975-01-481-2352
Clip And Retaining

014812352
HLMP-0104OPT107: RNCC: 3 | RNVC: 2
HLMP-0104OPT107: RNCC: 5 | RNVC: 2

22 Dec 2000

5975-01-481-6200
Electrical-Electronic Equipment Panel

014816200
714880-1: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-01-482-2171
Electrical Equipment Rack

014822171
133-340049-15: RNCC: 3 | RNVC: 2
133-340049-15: RNCC: 3 | RNVC: 9

13 Feb 2001

5975-01-455-6936
Rigid Metal Conduit

014556936
8314-1: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-456-6885
Junction Box

014566885
11470284: RNCC: 3 | RNVC: 2

23 Jun 1998

5975-01-455-8970
Guide Rail

014558970
9D0090-25P: RNCC: 3 | RNVC: 2
RC11090-25P: RNCC: 3 | RNVC: 2

20 May 1998

5975-01-420-9538
Electrical Equipment Rack Base

014209538
7334088G1: RNCC: 3 | RNVC: 2

28 Oct 1995

5975-01-422-1400
Electrical-Electronic Equipment Chassis

014221400
5005NT: RNCC: 3 | RNVC: 2

22 Nov 1995

5975-01-467-7051
Electrical Equipment Shelf

014677051
J1456B: RNCC: 3 | RNVC: 2

10 Sep 1999

5975-01-467-9359
Electrical-Electronic Equipment Chassis

014679359
726178-801: RNCC: 3 | RNVC: 2
726178-801-E2C: RNCC: 5 | RNVC: 9

21 Sep 1999

5975-01-467-6189
Electrical Equipment Rack

014676189
800R22: RNCC: 3 | RNVC: 2

7 Sep 1999

5975-01-339-7183
Electrical Components Tie Down Strap

013397183
2620526G001: RNCC: 3 | RNVC: 2

28 May 1991

5975-01-340-1388
Cable Marker Sleeve

013401388
506657-2: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2526
Blank Panel

013402526
11454083: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2670
Electrical Components Tie Down Strap

013402670
506657-32: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-1181
Flexible Metal Conduit Assembly

013401181
90151-103: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2890
Cable Marker Sleeve

013402890
506658-18: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-00-068-4478
Electrical Equipment Cabinet

000684478
CY4455WLR1: RNCC: 3 | RNVC: 2
K663300001: RNCC: 5 | RNVC: 2
5895-21-841-3609: RNCC: 6 | RNVC: 9

5 Jul 1967

5975-01-478-5828
Interconnecting Box

014785828
KC84352-001: RNCC: 3 | RNVC: 2

19 Sep 2000

5975-01-480-0150
Electrical Conduit Adapter

014800150
34417445: RNCC: 3 | RNVC: 2
3441745: RNCC: 5 | RNVC: 9

3 Nov 2000

5975-01-423-3705
Electrical Equipment Rack Base

014233705
7333944G1: RNCC: 3 | RNVC: 2

22 Dec 1995

5975-01-423-6812
Electrical Equipment Rack

014236812
7215-0021-3: RNCC: 3 | RNVC: 9

5 Jan 1996

5975-01-455-6887
Rigid Metal Conduit

014556887
8319-1: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-455-5435
Electrical-Electronic Equipment Chassis

014555435
F-3060-001-1111: RNCC: 3 | RNVC: 9

6 May 1998

5975-01-246-3114
Chassis Base

012463114
61-0109-B000: RNCC: 3 | RNVC: 2
61-0109-B000: RNCC: 3 | RNVC: 9

12 Dec 1986

5975-01-247-2118
Electrical Components Tie Down Strap

012472118
GTR112G8N: RNCC: 3 | RNVC: 2

29 Dec 1986

5975-01-510-1174
Electrical-Electronic Equipment Chassis

015101174
76003411-029: RNCC: 3 | RNVC: 2

14 Jul 2003

5975-01-417-6297
Electrical Wall Plate

014176297
1573440-101: RNCC: 3 | RNVC: 2

10 Aug 1995

5975-01-418-7693
Terminal Board

014187693
9D0090-75U: RNCC: 3 | RNVC: 2
RC11090-75U: RNCC: 5 | RNVC: 2
9D0090-75U: RNCC: 5 | RNVC: 2

6 Sep 1995

5975-01-465-7243
Electrical Wall Plate

014657243
7-511115146-7: RNCC: 3 | RNVC: 2

18 Jun 1999

5975-01-465-6884
Electrical-Electronic Equipment Chassis

014656884
WS-C5509: RNCC: 3 | RNVC: 2

17 Jun 1999

5975-01-465-5373
Electrical Equipment Foot

014655373
10208-1072-01: RNCC: 3 | RNVC: 2

11 Jun 1999

5975-01-338-4989
Rigid Metal Conduit Assembly

013384989
74A782422-1003: RNCC: 3 | RNVC: 2

4 May 1991

5975-00-676-6521
Electrical Equipment Mounting Base

006766521
111235-000: RNCC: 3 | RNVC: 2
MT1586APR17: RNCC: 5 | RNVC: 2
858-3-2019: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-01-516-8985
Electrical-Electronic Equipment Chassis

015168985
8110600-00: RNCC: 3 | RNVC: 2

23 Jan 2004

5975-01-209-3790
Rigid Metal Conduit Assembly

012093790
28-300-20884: RNCC: 3 | RNVC: 2

29 May 1985

5975-01-222-5631
Electrical Equipment Rack

012225631
2927093-1: RNCC: 3 | RNVC: 2
MT-6413/APQ-171(V): RNCC: 5 | RNVC: 2
500162-14: RNCC: 5 | RNVC: 9
582359-4: RNCC: 5 | RNVC: 9
2927093: RNCC: D | RNVC: 9

13 Dec 1985

5975-01-505-3815
Electrical Tie Down Mounting Base

015053815
LHMS-S5D: RNCC: 3 | RNVC: 2

5 Mar 2003

5975-01-505-2771
Electrical Components Tie Down Strap

015052771
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-4-9: RNCC: 3 | RNVC: 2
AS33671-4-9: RNCC: 5 | RNVC: 9

28 Feb 2003

5975-01-507-8872
Electronic Equipment Mounting Tray

015078872
52-06818-141: RNCC: 3 | RNVC: 2

7 May 2003

5975-01-508-3620
Guide Rail

015083620
910138-14: RNCC: 3 | RNVC: 2

19 May 2003

5975-01-463-4831
Flexible Metal Conduit

014634831
8212-15: RNCC: 3 | RNVC: 2
8212: RNCC: D | RNVC: 9

24 Mar 1999

5975-01-464-6124
Electrical-Electronic Equipment Panel

014646124
10555-1500-01: RNCC: 3 | RNVC: 2

5 May 1999

5975-01-337-1482
Electrical Components Tie Down Strap

013371482
PLY1S-C: RNCC: 3 | RNVC: 2
25233-00674: RNCC: 5 | RNVC: 2
25233-00674: RNCC: 5 | RNVC: 9

10 Apr 1991

5975-01-081-6299
Meter Illuminating Panel

010816299
700859: RNCC: 3 | RNVC: 2
1300157-1: RNCC: 3 | RNVC: 9
1300157-1: RNCC: 7 | RNVC: 2

17 Aug 1979

5975-01-082-7003
Electrical-Electronic Equipment Chassis

010827003
326076-2: RNCC: 3 | RNVC: 2

8 Sep 1979

5975-01-516-7435
Cable Collar

015167435
7011018: RNCC: 3 | RNVC: 2

16 Jan 2004

5975-01-517-0440
Electrical Conduit End Seal Disk

015170440
133-938: RNCC: 3 | RNVC: 2

28 Jan 2004

5975-01-442-5191
Electrical-Electronic Equipment Chassis

014425191
3C04-R: RNCC: 3 | RNVC: 2

17 Mar 1997

5975-01-444-0373
Electrical Equipment Rack

014440373
10488-1150-03: RNCC: 3 | RNVC: 2

25 Apr 1997

5975-01-420-5786
Electrical-Electronic Equipment Chassis

014205786
105-103146-002 REV E: RNCC: 3 | RNVC: 9
105-103146-002 REV E: RNCC: 5 | RNVC: 2

19 Oct 1995

5975-01-421-6733
Electrical-Electronic Equipment Panel

014216733
067-103-011: RNCC: 3 | RNVC: 2

13 Nov 1995

5975-01-421-3355
Electrical Conduit Adapter

014213355
6246136: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-499-6856
Electronic Junction Rack

014996856
1505963A-R: RNCC: 3 | RNVC: 2

31 Jul 2002

5975-01-462-3870
Special Support

014623870
13980-899-1: RNCC: 3 | RNVC: 2

1 Feb 1999

5975-01-462-3516
Electrical Equipment Rack

014623516
CCHA167: RNCC: 3 | RNVC: 2
PCU-VF: RNCC: 5 | RNVC: 2

29 Jan 1999

5975-00-669-8088
Flexible Metal Conduit Assembly

006698088
HTCD4K1000AA: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-074-9162
Electrical Conduit Bend

010749162
WW-C-563: RNCC: 4 | RNVC: 1
WW-C-563 TY3: RNCC: 5 | RNVC: 1

10 Apr 1979

5975-00-102-9639
Electrical Equipment Rack

001029639
01P00634E001: RNCC: 3 | RNVC: 9
MT4484APM: RNCC: 5 | RNVC: 1
01P00634E001: RNCC: C | RNVC: 1

29 Apr 1972

5975-01-513-9746
Electrical Equipment Rack

015139746
05141562-0021: RNCC: 3 | RNVC: 2
05141562-0021: RNCC: 5 | RNVC: 2

10 Oct 2003

5975-01-515-4844
Electrical Conduit Adapter

015154844
MA2111-08: RNCC: 3 | RNVC: 2

26 Nov 2003

5975-01-440-8531
Chassis Base

014408531
296775: RNCC: 3 | RNVC: 9

27 Jan 1997

5975-01-418-1630
Cable Marker Sleeve

014181630
17P1E1522-5: RNCC: 3 | RNVC: 2

21 Aug 1995

5975-01-417-8047
Cable Hanger

014178047
17P1E1045-23: RNCC: 3 | RNVC: 2

15 Aug 1995

5975-01-420-3209
Electrical-Electronic Equipment Panel

014203209
16E2512-863: RNCC: 3 | RNVC: 2

13 Oct 1995

5975-01-419-3582
Electrical-Electronic Equipment Chassis

014193582
C200H-SP001: RNCC: 3 | RNVC: 2

20 Sep 1995

5975-01-206-8868
Electrical Cable Nipple

012068868
1-1464-03: RNCC: 3 | RNVC: 9

24 Apr 1985

5975-01-211-5820
Junction Box Assembly

012115820
SM-D-969917: RNCC: 3 | RNVC: 2
2439087-2: RNCC: 5 | RNVC: 2

28 Jun 1985

5975-01-461-2343
Flexible Metal Conduit Assembly

014612343
230747-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-569: RNCC: 7 | RNVC: 2

4 Dec 1998

5975-01-498-1706
Electrical Equipment Cabinet

014981706
PER400AN24A: RNCC: 3 | RNVC: 2
PER400AN24A: RNCC: 5 | RNVC: 2

17 Jun 2002

5975-01-499-1515
Electrical Components Tie Down Strap

014991515
10249-3105-06: RNCC: 3 | RNVC: 2

15 Jul 2002

5975-01-498-5682
Rigid Metal Conduit

014985682
5HM31101-117: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7193
Rigid Metal Conduit Assembly

014987193
5HB71102-273: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-499-2118
Electrical-Electronic Equipment Chassis

014992118
988-5780-001: RNCC: 3 | RNVC: 2

17 Jul 2002

5975-01-458-7572
Electrical Conduit Adapter

014587572
237-1656A: RNCC: 3 | RNVC: 2

9 Sep 1998

5975-01-460-8410
Flexible Nonmetallic Conduit

014608410
8354-1: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-01-460-8431
Flexible Nonmetallic Conduit

014608431
8351-1: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-01-460-8430
Flexible Nonmetallic Conduit

014608430
8352-1: RNCC: 3 | RNVC: 2

18 Nov 1998

5975-01-461-2361
Flexible Metal Conduit Assembly

014612361
759-498-541: RNCC: 3 | RNVC: 2
230724-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-541: RNCC: 7 | RNVC: 2

22 Aug 2020

5975-01-461-3542
Electrical Conduit Tee

014613542
227094-F500000A: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-01-332-5259
Electrical Equipment Mounting Base

013325259
7002036-2: RNCC: 3 | RNVC: 2
404A-38-X014: RNCC: 5 | RNVC: 2
404A-38-X014: RNCC: 5 | RNVC: 9

11 Jan 1991

5975-01-333-1303
Electrical Equipment Rack

013331303
3657172: RNCC: 3 | RNVC: 2

25 Jan 1991

5975-01-333-7139
Electrical Components Tie Down Strap

013337139
TY-5242M-O: RNCC: 3 | RNVC: 2
1501131: RNCC: 5 | RNVC: 2
TY-5242M-O: RNCC: 5 | RNVC: 2
HNGL-TY242MX: RNCC: 5 | RNVC: 2
TY-5242MX-O: RNCC: 5 | RNVC: 2
TY-5242MX-0: RNCC: 5 | RNVC: 9
TY-5242M-0: RNCC: 5 | RNVC: 9

8 Feb 1991

5975-01-333-0900
Electrical-Electronic Equipment Chassis

013330900
DAA3383A273-101: RNCC: 3 | RNVC: 2

24 Jan 1991

5975-01-513-0308
Test Loo Controller

015130308
4641-01: RNCC: 3 | RNVC: 2
4641-01: RNCC: 5 | RNVC: 2

16 Sep 2003

5975-01-512-7655
Interconnecting Box

015127655
CCH-02U: RNCC: 3 | RNVC: 9

9 Sep 2003

5975-01-434-5036
Electrical-Electronic Equipment Panel

014345036
4692392: RNCC: 3 | RNVC: 2

31 Jul 1996

5975-01-486-3620
Junction Box

014863620
C99A30446-9: RNCC: 3 | RNVC: 9
C99A30446-9: RNCC: C | RNVC: 1

26 Jun 2001

5975-01-486-8940
Electrical-Electronic Equipment Chassis

014868940
103306: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-486-6670
Electrical Nonmetallic Conduit Assembly

014866670
227729-DL0000: RNCC: 3 | RNVC: 2

10 Jul 2001

5975-01-487-7319
Electrical Standardized Components Case Section

014877319
5HK01517-101: RNCC: 3 | RNVC: 2

15 Aug 2001

5975-01-488-0923
Rigid Metal Conduit Assembly

014880923
5HM40044-120: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-454-2062
Electrical Tie Down Mounting Base

014542062
SB7000UG2NY2P: RNCC: 3 | RNVC: 2
CB4021V3N12P: RNCC: 3 | RNVC: 2
9D0272-102P: RNCC: 5 | RNVC: 2
CB4021V3N12: RNCC: 5 | RNVC: 9
9D0272-102: RNCC: 5 | RNVC: 9

23 Mar 1998

5975-01-455-6882
Rigid Metal Conduit

014556882
8320-1: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-457-6006
Junction Box

014576006
558251-1: RNCC: 3 | RNVC: 2
558251-1: RNCC: 5 | RNVC: 9

28 Jul 1998

5975-01-457-6311
Electrical-Electronic Equipment Chassis

014576311
458908-1: RNCC: 3 | RNVC: 2
458908-1: RNCC: 3 | RNVC: 9

29 Jul 1998

5975-01-332-3464
Cable Identification Kit

013323464
P400R: RNCC: 3 | RNVC: 2

10 Jan 1991

5975-01-596-4924
Electrical-Electronic Equipment Chassis

015964924
S35T-NF: RNCC: 3 | RNVC: 9

18 May 2011

5975-01-046-7393
Cable Shield

010467393
4189694: RNCC: 3 | RNVC: 2

22 Aug 1977

5975-01-049-1793
Electrical Splice Plate

010491793
6ASP200: RNCC: 3 | RNVC: 2

13 Oct 1977

5975-01-509-4016
Electrical-Electronic Equipment Panel

015094016
28690-002: RNCC: 3 | RNVC: 2

20 Jun 2003

5975-01-510-6348
Ground Rod Section

015106348
SAGROUNDTARGET R: RNCC: 3 | RNVC: 2
SAGROUNDTARGET-8: RNCC: 5 | RNVC: 2
3-0095: RNCC: 5 | RNVC: 9

23 Jul 2003

5975-01-289-0675
Electrical Components Tie Down Strap

012890675
CC16-01: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-288-9879
Electrical Equipment Rack

012889879
A3015093: RNCC: 3 | RNVC: 2
MT-6616/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-288-9875
Electrical Equipment Rack

012889875
A3015090: RNCC: 3 | RNVC: 2
MT-6613/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-485-0796
Electrical Equipment Rack

014850796
106861002: RNCC: 3 | RNVC: 2
1746-A10: RNCC: 5 | RNVC: 2

16 May 2001

5975-01-484-7377
Electrical Equipment Cabinet

014847377
822-1376-001: RNCC: 3 | RNVC: 2
619U-1B: RNCC: 5 | RNVC: 2

7 May 2001

5975-01-485-4575
Electrical Cable Protector

014854575
132910001: RNCC: 3 | RNVC: 2
132910001: RNCC: 5 | RNVC: 2

29 May 2001

5975-01-134-3441
4 Way Bridge

011343441
41084V: RNCC: 3 | RNVC: 9

3 Jul 1982

5975-01-451-9453
Cable Marker Sleeve

014519453
013-007382-017: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-452-1942
Electrical-Electronic Equipment Chassis

014521942
150-034962-001: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-455-3797
Electrical Tie Down Mounting Base

014553797
CB4020V3N8-750: RNCC: 3 | RNVC: 2
9D0271-102T: RNCC: 3 | RNVC: 2

30 Apr 1998

5975-01-455-7114
Electronic Equipment Mounting Tray

014557114
418-3505: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-455-0480
Electrical Equipment Mounting Base

014550480
8900699-503: RNCC: 3 | RNVC: 9

21 Apr 1998

5975-01-456-4851
Blank Panel

014564851
10237-0120: RNCC: 3 | RNVC: 2

15 Jun 1998

5975-01-456-6845
Electrical-Electronic Equipment Chassis

014566845
660237-001: RNCC: 3 | RNVC: 9
ASC1568097: RNCC: 5 | RNVC: 9

23 Jun 1998

5975-01-330-0155
Ribbon Cable Clamp

013300155
177094-2: RNCC: 3 | RNVC: 2
177094-2: RNCC: 3 | RNVC: 9

28 Nov 1990

5975-01-329-5561
Electrical Equipment Cabinet

013295561
T7341L: RNCC: 3 | RNVC: 2

19 Nov 1990

5975-00-633-7265
Conduit

006337265
6337265: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-636-1152
Electrical Grounding Plate

006361152
K866544-1SUB4: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-636-1702
Electrical Wall Plate

006361702
20C: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-508-4642
Electrical-Electronic Equipment Panel

015084642
KC84386-001: RNCC: 3 | RNVC: 2

21 May 2003

5975-01-508-5816
Electrical Components Tie Down Strap

015085816
871003: RNCC: 3 | RNVC: 2

27 May 2003

5975-01-284-1577
Electrical Conduit Coupling

012841577
12L371-7: RNCC: 3 | RNVC: 2

19 Aug 1988

5975-01-284-7047
Electrical Conductor Bushing

012847047
2054: RNCC: 3 | RNVC: 2

30 Aug 1988

5975-01-483-9940
Cable Marker Sleeve

014839940
2540806-73: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-7402
Electrical Equipment Rack

014837402
9452977-01: RNCC: 3 | RNVC: 2
9452977: RNCC: D | RNVC: 9

5 Apr 2001

5975-01-484-4280
Electrical Components Tie Down Strap

014844280
10178-1514: RNCC: 3 | RNVC: 2

27 Apr 2001

5975-01-483-9916
Cable Marker Sleeve

014839916
2540806-44: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-492-8326
Cable Hanger

014928326
269A8617: RNCC: 3 | RNVC: 2
269A8617: RNCC: 3 | RNVC: 9

13 Dec 2001

5975-01-493-7854
Electrical Components Tie Down Strap

014937854
WIT-120RRUVB: RNCC: 3 | RNVC: 9
WIT-120RRBLACK: RNCC: 5 | RNVC: 9
4-1-101920ITEM 34: RNCC: 5 | RNVC: 9
4-1-101920/34: RNCC: 5 | RNVC: 9

17 Jan 2002

5975-01-454-1601
Interconnecting Box

014541601
J-1013/AIC: RNCC: 3 | RNVC: 2

20 Mar 1998

5975-01-327-2235
Electrical-Electronic Equipment Chassis

013272235
0962E-7100: RNCC: 3 | RNVC: 2
9A1: RNCC: 5 | RNVC: 2

10 Oct 1990

5975-01-328-5132
Magnetic Fiber Optics Splice Protector

013285132
FP-3M: RNCC: 3 | RNVC: 9

2 Nov 1990

5975-00-036-9157
Cap Brush

000369157
20934: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-217-2514
Electrical-Electronic Equipment Chassis

012172514
2120473-002: RNCC: 3 | RNVC: 2

23 Sep 1985

5975-01-483-0504
Conduit Chase Nipple

014830504
848AL: RNCC: 3 | RNVC: 2

14 Mar 2001

5975-01-486-8984
Electrical-Electronic Equipment Chassis

014868984
504254: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-487-2406
Junction Box

014872406
140-015-0003-GPC: RNCC: 3 | RNVC: 9
140-015-0003-GPC: RNCC: 5 | RNVC: 2

30 Jul 2001

5975-01-326-6260
Electrical Box Connector

013266260
SHC-1012-SS: RNCC: 3 | RNVC: 9

27 Sep 1990

5975-01-488-5030
Electrical Equipment Rack

014885030
709-11-029: RNCC: 3 | RNVC: 9
709-11-029: RNCC: 5 | RNVC: 9

27 Aug 2001

5975-01-201-2662
Electrical-Electronic Equipment Chassis

012012662
3365561-1: RNCC: 3 | RNVC: 2
112718-1: RNCC: 5 | RNVC: 2

14 Feb 1985

5975-01-203-8599
Electrical Components Tie Down Strap

012038599
PLT2S-30: RNCC: 3 | RNVC: 2
4082000: RNCC: 5 | RNVC: 2
0117 3467: RNCC: 5 | RNVC: 2
4788867: RNCC: 5 | RNVC: 2
01173467ES8976-72: RNCC: 5 | RNVC: 2
25233-00661: RNCC: 5 | RNVC: 2
25233-00661: RNCC: 5 | RNVC: 9

20 Mar 1985

5975-01-480-4333
Electrical Nonmetallic Conduit Assembly

014804333
227663-DL0000: RNCC: 3 | RNVC: 2

20 Nov 2000

5975-01-481-6199
Electrical-Electronic Equipment Panel

014816199
714855-1: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-01-481-0654
Electrical Equipment Mounting Base

014810654
7000368: RNCC: 3 | RNVC: 2

15 Dec 2000

5975-01-144-0346
Post

011440346
4232: RNCC: 3 | RNVC: 2
4232: RNCC: 5 | RNVC: 9

13 Dec 1982

5975-01-141-4948
Electrical-Electronic Equipment Chassis

011414948
0N312426: RNCC: 3 | RNVC: 2
MX-10438(V)1/G: RNCC: 5 | RNVC: 2

30 Oct 1982

5975-01-227-4151
Junction Box

012274151
1671530: RNCC: 3 | RNVC: 2

3 Mar 1986

5975-01-482-0218
Video Display Driver

014820218
802263-6: RNCC: 3 | RNVC: 2

6 Feb 2001

5975-01-482-2172
Electrical Equipment Rack

014822172
133-340049-25: RNCC: 3 | RNVC: 2
133-340049-25: RNCC: 3 | RNVC: 9

13 Feb 2001

5975-01-483-5673
Interconnecting Box

014835673
683R115G01: RNCC: 3 | RNVC: 2

2 Apr 2001

5975-01-451-1960
Storage Driv Heater

014511960
11450356-9: RNCC: 3 | RNVC: 2

8 Dec 1997

5975-01-451-6139
Insulator Cable

014516139
652-2807-001: RNCC: 3 | RNVC: 2

22 Dec 1997

5975-01-324-1662
Electrical-Electronic Equipment Chassis

013241662
222-3005-822: RNCC: 3 | RNVC: 2
706A35-402-011: RNCC: 5 | RNVC: 2

11 Aug 1990

5975-01-276-0035
Electrical Equipment Cabinet

012760035
M37-383: RNCC: 3 | RNVC: 9
5018343-055: RNCC: 5 | RNVC: 2

2 Apr 1988

5975-01-285-9492
Electrical Equipment Mounting Base

012859492
HLN-4034C: RNCC: 3 | RNVC: 9
HLN-4034C: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-480-2069
Electrical-Electronic Equipment Chassis

014802069
16U4580-7: RNCC: 3 | RNVC: 2

9 Nov 2000

5975-01-480-0972
Electrical Equipment Rack

014800972
28-155-200-00: RNCC: 3 | RNVC: 2

7 Nov 2000

5975-01-225-9514
Conduit Chase Nipple

012259514
188195-FB5100: RNCC: 3 | RNVC: 2
10250679-1: RNCC: 7 | RNVC: 2

9 Feb 1986

5975-01-225-5546
Strain Electrical Conductor Clamp

012255546
G8361-20M: RNCC: 3 | RNVC: 2

3 Feb 1986

5975-01-398-1454
Rigid Metal Conduit

013981454
1310-0101-30: RNCC: 3 | RNVC: 2
1310-0101-30: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-398-1666
Electrical-Electronic Equipment Chassis

013981666
4233: RNCC: 3 | RNVC: 9
1093064R00: RNCC: 5 | RNVC: 2

26 Oct 1994

5975-01-397-5172
Rigid Metal Conduit

013975172
1310-0101-4: RNCC: 3 | RNVC: 2
1310-0101-4: RNCC: 5 | RNVC: 9

13 Oct 1994

5975-01-449-3083
Conduit Outlet

014493083
53890-0: RNCC: 3 | RNVC: 2
MP150099201: RNCC: 5 | RNVC: 9
5389: RNCC: 5 | RNVC: 9
MP150099201: RNCC: C | RNVC: 1

25 Sep 1997

5975-01-449-9145
Shiel Grounding Kit

014499145
D-500-0186: RNCC: 3 | RNVC: 2

20 Oct 1997

5975-00-673-9869
Electrical Conduit Elbow

006739869
362563-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-151-9681
Electrical Equipment Mounting Base

011519681
622-5680-002: RNCC: 3 | RNVC: 2

25 Apr 1983

5975-01-103-9507
Junction Box Strip

011039507
374266-7: RNCC: 3 | RNVC: 2

23 Nov 1980

5975-01-224-5270
Electrical Conduit Coupling

012245270
S91238-16P: RNCC: 3 | RNVC: 2
S91238-16P: RNCC: 3 | RNVC: 9
734159-1: RNCC: 7 | RNVC: 2

17 Jan 1986

5975-01-394-1046
Electrical Conduit Nipple

013941046
ES7587-04B: RNCC: 3 | RNVC: 2
ES7587-04B: RNCC: 3 | RNVC: 9

2 Aug 1994

5975-01-449-1203
Electrical Equipment Mounting Base

014491203
10274089: RNCC: 3 | RNVC: 2

19 Sep 1997

5975-01-192-0147
Electrical Tie Down Mounting Base

011920147
TM2R6-C: RNCC: 3 | RNVC: 2
131951-002: RNCC: 5 | RNVC: 2
TM2R6: RNCC: 5 | RNVC: 9

15 Oct 1984

5975-00-657-6342
Box Assy

006576342
5283854: RNCC: 3 | RNVC: 2
6576342: RNCC: 3 | RNVC: 2

20 Aug 1969

5975-00-242-9130
Electrical Equipment Cabinet

002429130
CY825SRC26: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-343-0370
Electrical Equipment Cabinet

003430370
CY1390ATMQ5: RNCC: 2 | RNVC: 2
MILR10882: RNCC: 4 | RNVC: 1
CY1390ATMQ5: RNCC: 5 | RNVC: 1
SK5320-100-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-278-2828
Junction Box

012782828
2502: RNCC: 3 | RNVC: 2
2502: RNCC: 5 | RNVC: 9

3 May 1988

5975-01-415-9450
Electrical Nonmetallic Conduit Assembly

014159450
740NC100M64-36-296: RNCC: 3 | RNVC: 2

10 Jul 1995

5975-01-315-5842
Electrical Equipment Rack

013155842
RF-7405-1: RNCC: 3 | RNVC: 2
10143-0050: RNCC: 3 | RNVC: 2

20 Feb 1990

5975-00-518-3114
Electrical Conductor Bushing

005183114
10-5049Y: RNCC: 3 | RNVC: 9
10-5049Y: RNCC: 5 | RNVC: 9
10-5049Y: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-513-8966
Electrical Conduit Coupling Nut

005138966
10-24510: RNCC: 3 | RNVC: 9
10-24510: RNCC: 5 | RNVC: 9
10-24510: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-01-133-0346
Cable Carrier

011330346
CC11-C: RNCC: 3 | RNVC: 2
843942-1: RNCC: 5 | RNVC: 2

9 Jun 1982

5975-01-206-2605
Electrical Components Tie Down Strap

012062605
2465365P1: RNCC: 3 | RNVC: 1

16 Apr 1985

5975-01-206-8862
Electrical Cable Nipple

012068862
1-1464-09: RNCC: 3 | RNVC: 9

24 Apr 1985

5975-01-206-1323
Electrical-Electronic Equipment Chassis

012061323
542-459693-000: RNCC: 3 | RNVC: 2

15 Apr 1985

5975-01-343-6073
Electrical Equipment Cabinet

013436073
40CAB202RC: RNCC: 3 | RNVC: 9
40CAB202RC: RNCC: 5 | RNVC: 9
40CAB202RC: RNCC: C | RNVC: 1

15 Aug 1991

5975-01-349-1895
Electrical Equipment Shelf

013491895
3661853-1: RNCC: 3 | RNVC: 2

22 Nov 1991

5975-01-329-9222
Electrical Equipment Drawer

013299222
IADRFH7-19-30E: RNCC: 3 | RNVC: 2

28 Nov 1990

5975-01-339-3734
Flexible Metal Conduit Assembly

013393734
910293: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-128-3023
Electrical Components Tie Down Strap

011283023
10S300-2-110: RNCC: 3 | RNVC: 9
10S300-2-110: RNCC: C | RNVC: 1

20 Mar 1982

5975-01-131-0770
Electrical Equipment Mounting Base

011310770
404-25S1/DPX2-0: RNCC: 3 | RNVC: 2

4 May 1982

5975-01-446-3894
Electronic Equipment Mounting Tray

014463894
3350183-15: RNCC: 3 | RNVC: 2
3350183-9: RNCC: 5 | RNVC: 9

1 Jul 1997

5975-01-185-6643
Wire Strand Hanger

011856643
128785-1: RNCC: 3 | RNVC: 2

1 Aug 1984

5975-01-186-2058
Electrical Equipment Cabinet

011862058
0N002702-3: RNCC: 3 | RNVC: 2

8 Aug 1984

5975-01-186-4268
Spacer

011864268
1-0122-0016: RNCC: 3 | RNVC: 9

10 Aug 1984

5975-01-440-2485
Electrical Equipment Mounting Base

014402485
5598794-19: RNCC: 3 | RNVC: 2

8 Jan 1997

5975-01-440-2066
Electrical-Electronic Equipment Chassis

014402066
6387564-9: RNCC: 3 | RNVC: 2

7 Jan 1997

5975-01-311-8635
Electrical Equipment Mounting Base

013118635
RA400SM: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-313-1414
Electrical-Electronic Equipment Chassis

013131414
RA-11: RNCC: 3 | RNVC: 2

3 Jan 1990

5975-01-184-5203
Cable Tie Mount

011845203
FTH-2A-RT: RNCC: 3 | RNVC: 9
907970-001: RNCC: 5 | RNVC: 2
FTH-2: RNCC: 5 | RNVC: 9
FTH-2A: RNCC: 5 | RNVC: 9

18 Jul 1984

5975-00-496-9767
Electrical Wall Plate

004969767
SCB577862-2: RNCC: 3 | RNVC: 2

8 Oct 1969

Load More Results