What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 162 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 162 of 176

5975-01-545-5690
Electrical Equipment Rack

015455690
AR2105BLK: RNCC: 3 | RNVC: 2

16 Nov 2006

5975-01-470-9210
Guide Rail

014709210
061670: RNCC: 3 | RNVC: 2

14 Jan 2000

5975-01-439-7574
Electrical Tie Down Mounting Base

014397574
5223813-9: RNCC: 3 | RNVC: 2

18 Dec 1996

5975-01-626-4180
Electrical-Electronic Equipment Panel

016264180
734-65121-1: RNCC: 3 | RNVC: 2
734-65121: RNCC: D | RNVC: 9

10 Mar 2014

5975-01-627-7499
Cable Marker Sleeve

016277499
TMS-90-SCE-3/4: RNCC: 3 | RNVC: 2

25 Apr 2014

5975-01-627-7506
Cable Marker Sleeve

016277506
TMS-90-SCE-3/16: RNCC: 3 | RNVC: 2

25 Apr 2014

5975-01-627-6169
Junction Box

016276169
802-407: RNCC: 3 | RNVC: 2

21 Apr 2014

5975-01-627-8491
Electrical Conduit Tee

016278491
T45TIW: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-628-9497
Electrical Equipment Rack

016289497
RACK 900-36N: RNCC: 3 | RNVC: 2

16 Jun 2014

5975-00-167-0937
Electrical Equipment Mounting Base

001670937
658670: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-381-6841
Cable Hanger

013816841
2907713: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-349-3001
Electrical Components Tie Down Strap

013493001
TYS14: RNCC: 3 | RNVC: 2
241201505042: RNCC: 5 | RNVC: 2
78621080505: RNCC: 5 | RNVC: 2
352250041856: RNCC: 5 | RNVC: 2

23 Nov 1991

5975-01-544-1134
Electrical-Electronic Equipment Panel

015441134
414193-1: RNCC: 3 | RNVC: 2

2 Oct 2006

5975-01-543-0194
Electrical Equipment Mounting Base

015430194
70297-101: RNCC: 3 | RNVC: 2
17B9E1000-551: RNCC: 7 | RNVC: 2

25 Aug 2006

5975-01-468-9226
Electrical Conduit Ferrule

014689226
FERRULE SET 0016: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-9255
Flexible Metal Conduit Assembly

014689255
254715: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-624-0868
Electronic Junction Rack

016240868
932573-101: RNCC: 3 | RNVC: 2

16 Dec 2013

5975-01-625-4892
Metallic Raceway

016254892
80038800029: RNCC: 3 | RNVC: 9

5 Feb 2014

5975-01-625-2190
Electronic Equipment Mounting Tray

016252190
68A870386-1009: RNCC: 3 | RNVC: 2

28 Jan 2014

5975-01-128-0715
Ammeter Clamp

011280715
MODEL633TYPEA-1: RNCC: 3 | RNVC: 9

11 Mar 1982

5975-01-541-4055
Electrical Tie Down Mounting Base

015414055
SB7000UG2NY4P: RNCC: 3 | RNVC: 2
CB4021V3N24P: RNCC: 3 | RNVC: 2
9D0272-104P: RNCC: 5 | RNVC: 2

26 Jun 2006

5975-01-541-4410
Flexible Metal Conduit

015414410
FLB015: RNCC: 3 | RNVC: 2

27 Jun 2006

5975-01-419-1926
Sectiona Terminal Junction Block

014191926
9D0090-25U: RNCC: 3 | RNVC: 2
RC11090-25U: RNCC: 5 | RNVC: 2
9D0090-25U: RNCC: 5 | RNVC: 2
RC11090: RNCC: D | RNVC: 9

15 Sep 1995

5975-01-419-0017
Electrical-Electronic Equipment Chassis

014190017
804740-1: RNCC: 3 | RNVC: 2

11 Sep 1995

5975-01-407-5910
Blank Panel

014075910
516282-22: RNCC: 3 | RNVC: 2
516282-22: RNCC: 3 | RNVC: 9

31 Jan 1995

5975-01-621-4613
Electrical Equipment Foot

016214613
1200570-3: RNCC: 3 | RNVC: 2

9 Sep 2013

5975-01-375-2795
Electrical-Electronic Equipment Panel

013752795
68725-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-346-8327
Cable Terminal Chamber

013468327
DAA3255D147-001: RNCC: 3 | RNVC: 2

10 Oct 1991

5975-01-358-9929
Electrical Conduit Adapter

013589929
710DS004B1209: RNCC: 3 | RNVC: 2
710DS004B12-09: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-541-2353
Electrical Equipment Rack

015412353
950865-0002: RNCC: 3 | RNVC: 2

20 Jun 2006

5975-01-418-1627
Guide Rail

014181627
9D0090-12U: RNCC: 3 | RNVC: 2

21 Aug 1995

5975-01-618-5483
Electronic Junction Rack

016185483
CTJ-3A-07-4021: RNCC: 3 | RNVC: 2

27 Apr 2013

5975-01-312-1855
Electrical Equipment Cabinet

013121855
8460883-1: RNCC: 3 | RNVC: 2

12 Dec 1989

5975-01-346-6740
Electrical Equipment Rack

013466740
3525175-110: RNCC: 3 | RNVC: 2
54.1322.300.00: RNCC: 5 | RNVC: 2

9 Oct 1991

5975-01-345-7823
Electrical-Electronic Equipment Chassis

013457823
GC2-32100203: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-8531
Electrical Conduit Adapter

013458531
710-S017NF24D: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-357-0188
Electrical Equipment Rack

013570188
HP19500B: RNCC: 3 | RNVC: 2
222-4793-075: RNCC: 5 | RNVC: 2

16 Apr 1992

5975-01-417-3381
Sectiona Terminal Junction Block

014173381
9D0090-21U: RNCC: 3 | RNVC: 2
9D0090-21U: RNCC: 5 | RNVC: 2

5 Aug 1995

5975-00-485-8763
Electrical Conduit Ferrule

004858763
709107: RNCC: 3 | RNVC: 2
62239: RNCC: 5 | RNVC: 9

26 May 1969

5975-01-356-7617
Electrical Equipment Mounting Base

013567617
3658120-5: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-355-5868
Electrical Equipment Rack

013555868
10301-1100: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-01-397-8661
Rigid Metal Conduit

013978661
1310-0101-21: RNCC: 3 | RNVC: 2
1310-0101-21: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-397-8664
Rigid Metal Conduit

013978664
1310-0101-24: RNCC: 3 | RNVC: 2
1310-0101-24: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-397-1663
Electrical Conduit End Seal Disk

013971663
M527488-22: RNCC: 3 | RNVC: 2

4 Oct 1994

5975-01-308-4964
Electrical-Electronic Equipment Panel

013084964
945-0002: RNCC: 3 | RNVC: 9

29 Sep 1989

5975-01-310-3517
Electrical-Electronic Equipment Chassis

013103517
SM-D-968923: RNCC: 3 | RNVC: 2

2 Nov 1989

5975-01-343-6282
Electrical-Electronic Equipment Chassis

013436282
771011-2: RNCC: 3 | RNVC: 2

15 Aug 1991

5975-01-343-9338
Electrical-Electronic Equipment Chassis

013439338
718362-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-4894
Electrical-Electronic Equipment Panel

013434894
208127-101: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-9931
Cable Spacer

013439931
25933-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9930
Cable Spacer

013439930
25932-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-344-1350
Fanning Strip

013441350
21-160 BAL: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-343-4763
Junction Box

013434763
FX324-51: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-344-1514
Interconnecting Cabinet

013441514
374266-2: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-343-9123
Electrical Equipment Rack

013439123
256619-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-355-5867
Electrical Equipment Rack

013555867
10301-1200: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-01-355-5869
Electrical Equipment Rack

013555869
10301-1300: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-01-414-8770
Electrical Equipment Mounting Base

014148770
165880: RNCC: 3 | RNVC: 2

15 Jun 1995

5975-01-415-0052
Plate

014150052
DM3571: RNCC: 3 | RNVC: 2

19 Jun 1995

5975-01-394-2885
Electrical Conduit Nipple

013942885
016-2-WB26-12-1: RNCC: 3 | RNVC: 2
016-2-WB26-12-1: RNCC: 3 | RNVC: 9
016-2-WB26-12-1: RNCC: 5 | RNVC: 9
HP-016-2-WB26-12-1: RNCC: 5 | RNVC: 9

6 Aug 1994

5975-01-608-1603
Electrical Equipment Rack

016081603
922354-21: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-491-5547
Electrical Components Tie Down Strap

014915547
152104085: RNCC: 3 | RNVC: 2

25 Oct 2001

5975-01-491-6806
Electrical Equipment Mounting Base

014916806
30742: RNCC: 3 | RNVC: 2

29 Oct 2001

5975-01-400-4000
Electrical-Electronic Equipment Chassis

014004000
66G3515: RNCC: 3 | RNVC: 2
66G3515: RNCC: 5 | RNVC: 9

15 Dec 1994

5975-01-342-1196
Electrical Box Connector

013421196
5366: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-6038
Cable Marker Sleeve

013426038
651036-128: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6050
Cable Marker Sleeve

013426050
651043-39: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-343-4987
Flexible Metal Conduit Assembly

013434987
NAF1150-6A154: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-4976
Flexible Metal Conduit Assembly

013434976
NAF1150-4A111: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-175-3566
Electrical Equipment Cabinet

011753566
0N285576-2: RNCC: 3 | RNVC: 2

30 Mar 1984

5975-01-392-1692
Blank Panel

013921692
174D5913P1: RNCC: 3 | RNVC: 2

24 Jun 1994

5975-01-416-7332
Electrical-Electronic Equipment Chassis

014167332
8500716-901: RNCC: 3 | RNVC: 2

25 Jul 1995

5975-01-491-1723
Cable Marker Sleeve

014911723
SS7095-5009: RNCC: 3 | RNVC: 2

15 Oct 2001

5975-01-414-6205
Electrical Equipment Mounting Base

014146205
7N1425: RNCC: 3 | RNVC: 2

9 Jun 1995

5975-01-425-7511
Electrical Components Tie Down Strap

014257511
PLT3S-Q0: RNCC: 3 | RNVC: 2

27 Feb 1996

5975-00-376-6345
Flexible Metal Conduit Assembly

003766345
159-54132-3: RNCC: 3 | RNVC: 2
HTCD4K1200AB: RNCC: 5 | RNVC: 2
159-54132-3: RNCC: 5 | RNVC: 2
159-54132-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-341-1360
Junction Box

013411360
L572-000-029: RNCC: 3 | RNVC: 2
J-5132/BYG-501: RNCC: 5 | RNVC: 2

25 Jun 1991

5975-01-342-1517
Electrical-Electronic Equipment Panel

013421517
30672-1: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-352-4909
Flexible Metal Conduit Assembly

013524909
CH10-0192-416-03-SM: RNCC: 3 | RNVC: 2

27 Jan 1992

5975-01-424-6081
Junction Box

014246081
981AS400-2: RNCC: 3 | RNVC: 2

1 Feb 1996

5975-01-425-0239
Electrical Equipment Rack

014250239
10-189646-1: RNCC: 3 | RNVC: 2

9 Feb 1996

5975-01-425-3930
Electrical Equipment Mounting Base

014253930
4231738: RNCC: 3 | RNVC: 2

20 Feb 1996

5975-01-425-7513
Electrical Components Tie Down Strap

014257513
PLT2S-Q0: RNCC: 3 | RNVC: 2

27 Feb 1996

5975-01-486-2998
Cable Marker Sleeve

014862998
651661: RNCC: 3 | RNVC: 2

25 Jun 2001

5975-01-487-5948
Blank Panel

014875948
068293: RNCC: 3 | RNVC: 2

10 Aug 2001

5975-01-487-5954
Electrical-Electronic Equipment Chassis

014875954
068861: RNCC: 3 | RNVC: 2

10 Aug 2001

5975-01-396-0052
Electrical Components Tie Down Strap

013960052
6384748-002: RNCC: 3 | RNVC: 2

9 Sep 1994

5975-01-396-3373
Electrical Cable Nipple

013963373
TCFS-20-19C-0-20-100-AH: RNCC: 3 | RNVC: 2

19 Sep 1994

5975-01-340-7512
Electrical Equipment Drawer

013407512
2003187-00: RNCC: 3 | RNVC: 9
2003187-00: RNCC: 5 | RNVC: 2

19 Jun 1991

5975-01-148-4427
Pillar

011484427
DYN302: RNCC: 3 | RNVC: 9

5 Mar 1983

5975-01-350-7682
Electrical-Electronic Equipment Panel

013507682
10096-1002: RNCC: 3 | RNVC: 2

20 Dec 1991

5975-01-410-9817
Cable Spacer

014109817
893765: RNCC: 3 | RNVC: 2

15 Mar 1995

5975-01-423-3706
Electronic Junction Rack

014233706
7596250G1: RNCC: 3 | RNVC: 2

22 Dec 1995

5975-01-423-4165
Electrical Equipment Cabinet

014234165
3046367G1: RNCC: 3 | RNVC: 2

26 Dec 1995

5975-01-485-8798
Cable Marker Sleeve

014858798
651804: RNCC: 3 | RNVC: 2

11 Jun 2001

5975-01-486-3014
Cable Marker Sleeve

014863014
651666: RNCC: 3 | RNVC: 2

25 Jun 2001

5975-01-485-7807
Metallic Raceway Assembly

014857807
659248: RNCC: 3 | RNVC: 2

6 Jun 2001

5975-01-483-9908
Cable Marker Sleeve

014839908
2540806-58: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-393-3240
Electrical Equipment Mounting Base

013933240
8010000341-1: RNCC: 3 | RNVC: 9

18 Jul 1994

5975-01-393-3497
Electrical Nonmetallic Conduit Assembly

013933497
5493230-46: RNCC: 3 | RNVC: 2
5493230-46: RNCC: 5 | RNVC: 2

18 Jul 1994

5975-01-393-3502
Electrical Nonmetallic Conduit Assembly

013933502
5493230-47: RNCC: 3 | RNVC: 2

18 Jul 1994

5975-01-393-5202
Enclosure.

013935202
168-808-1: RNCC: 3 | RNVC: 2

21 Jul 1994

5975-01-394-2773
Electrical Equipment Mounting Base

013942773
7334107G1: RNCC: 3 | RNVC: 2
7334093G1: RNCC: 5 | RNVC: 9

6 Aug 1994

5975-01-339-4001
Rigid Metal Conduit Assembly

013394001
GA191-A24B2452-54NFS: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-340-2881
Cable Marker Sleeve

013402881
506658-26: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2671
Electrical Components Tie Down Strap

013402671
506657-31: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-349-7082
Strain Electrical Conductor Clamp

013497082
341912: RNCC: 3 | RNVC: 9
341912: RNCC: 5 | RNVC: 9
341912: RNCC: C | RNVC: 1

3 Dec 1991

5975-01-410-7547
Junction Box Cover

014107547
5893695-101: RNCC: 3 | RNVC: 2

11 Mar 1995

5975-01-422-2904
Electronic Junction Rack

014222904
7596244G1: RNCC: 3 | RNVC: 2

28 Nov 1995

5975-01-421-3386
Blank Panel

014213386
7599071G1: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-422-2787
Cable Hanger

014222787
101-107-182: RNCC: 3 | RNVC: 2
5975PL1285670: RNCC: 6 | RNVC: 9

28 Nov 1995

5975-01-373-3981
Electrical-Electronic Equipment Chassis

013733981
408613-1: RNCC: 3 | RNVC: 2

2 Apr 1993

5975-00-581-2829
Electrical Equipment Mounting Base

005812829
747452-1: RNCC: 3 | RNVC: 2

19 Dec 1974

5975-01-333-1301
Electrical Equipment Cabinet

013331301
7131850-05: RNCC: 3 | RNVC: 2
CY-7168A/AYK-10V: RNCC: 5 | RNVC: 2

25 Jan 1991

5975-01-408-9313
Electrical-Electronic Equipment Chassis

014089313
407040/407044/407045: RNCC: 3 | RNVC: 2

1 Mar 1995

5975-01-481-6202
Electrical-Electronic Equipment Panel

014816202
714980-1: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-01-481-5666
Electrical-Electronic Equipment Panel

014815666
34003-502: RNCC: 3 | RNVC: 2

12 Jan 2001

5975-01-369-8162
Electrical-Electronic Equipment Panel

013698162
03908-08-001: RNCC: 3 | RNVC: 9

7 Jan 1993

5975-01-332-0359
Junction Box Cover

013320359
3322214: RNCC: 3 | RNVC: 2

2 Jan 1991

5975-01-332-6361
Electrical Conduit Nipple

013326361
T1-1005-03: RNCC: 3 | RNVC: 2

14 Jan 1991

5975-01-373-3793
Electrical-Electronic Equipment Panel

013733793
3750886-100-3: RNCC: 3 | RNVC: 2

2 Apr 1993

5975-01-373-9966
Cable Marker Sleeve

013739966
TRSA1014/E/9: RNCC: 3 | RNVC: 2
99045872: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-373-9963
Cable Marker Sleeve

013739963
TRSA1014/E/4: RNCC: 3 | RNVC: 2
99045867: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-433-7569
Electrical Equipment Mounting Base

014337569
10299-0569: RNCC: 3 | RNVC: 2
RF-5081BMT-125: RNCC: 3 | RNVC: 2

10 Jul 1996

5975-01-407-4074
Electrical Equipment Rack

014074074
AS-H819-100: RNCC: 3 | RNVC: 9

27 Jan 1995

5975-01-478-8621
Electrical-Electronic Equipment Chassis

014788621
DE100I-CSW: RNCC: 3 | RNVC: 9

28 Sep 2000

5975-01-479-6197
Electronic Equipment Mounting Tray

014796197
41-00292-001: RNCC: 3 | RNVC: 2
C99A9350-3: RNCC: 7 | RNVC: 9
C99A9350-3: RNCC: C | RNVC: 1

26 Oct 2000

5975-01-671-3771
Electrical Equipment Mounting Base

016713771
2610-3900-500-101: RNCC: 3 | RNVC: 2
70600-72843-101: RNCC: 5 | RNVC: 2

23 Mar 2018

5975-01-671-3763
Electronic Equipment Mounting Tray

016713763
50951801-001: RNCC: 3 | RNVC: 2
50951801-001: RNCC: 5 | RNVC: 2

23 Mar 2018

5975-00-342-4339
Electrical Cable Nipple

003424339
8024468: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-343-9330
Electrical Equipment Cabinet

013439330
716529-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-351-1126
Electrical-Electronic Equipment Panel

013511126
3661869-1: RNCC: 3 | RNVC: 2

31 Dec 1991

5975-01-475-1378
Electrical Equipment Mounting Base

014751378
16F2261-221: RNCC: 3 | RNVC: 2

23 May 2000

5975-01-668-7672
Electrical Equipment Mounting Base

016687672
EMT360-01: RNCC: 3 | RNVC: 2

6 Dec 2017

5975-01-669-2863
Electrical Equipment Rack

016692863
1020902: RNCC: 3 | RNVC: 2
1020902: RNCC: 5 | RNVC: 2

3 Jan 2018

5975-01-668-8600
Electrical-Electronic Equipment Chassis

016688600
AT-TN-SPLT-SHELF04: RNCC: 3 | RNVC: 2

11 Dec 2017

5975-01-669-5403
Blank Panel

016695403
PWR-COVER-4430: RNCC: 3 | RNVC: 2

11 Jan 2018

5975-01-668-8601
Electrical-Electronic Equipment Chassis

016688601
AT-TN-SPLT-SHELF02: RNCC: 3 | RNVC: 2

11 Dec 2017

5975-01-669-0314
Electrical-Electronic Equipment Chassis

016690314
QE159AV: RNCC: 3 | RNVC: 2

18 Dec 2017

5975-01-670-0286
Junction Box Cover

016700286
65902-01229-1013F: RNCC: 3 | RNVC: 2

1 Feb 2018

5975-01-328-5918
Conduit

013285918
200266-0032: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-323-4875
Electrical Equipment Mounting Base

013234875
622-8118-001: RNCC: 3 | RNVC: 2
622-8118-001: RNCC: 5 | RNVC: 2
MT-6791/ARC-217 (V): RNCC: 5 | RNVC: 2

28 Jul 1990

5975-01-331-0597
Interconnecting Box

013310597
16E2504-848: RNCC: 3 | RNVC: 2

13 Dec 1990

5975-01-369-7521
Terminal Board

013697521
RC11090-82U: RNCC: 3 | RNVC: 2
9D0090-82U: RNCC: 5 | RNVC: 2

6 Jan 1993

5975-01-431-8520
Support Stowage

014318520
11466854: RNCC: 3 | RNVC: 2

20 May 1996

5975-01-432-6127
Guide Rail

014326127
JF13E01-18: RNCC: 3 | RNVC: 2

10 Jun 1996

5975-01-468-8562
Flexible Metal Conduit Assembly

014688562
3260AS434: RNCC: 3 | RNVC: 2

25 Oct 1999

5975-01-471-0474
Stuffing Tube

014710474
630A007NF083H: RNCC: 3 | RNVC: 2

20 Jan 2000

5975-01-472-4530
Electrical-Electronic Equipment Panel

014724530
3351786-5: RNCC: 3 | RNVC: 2

3 Mar 2000

5975-01-470-1074
Switch Box Case

014701074
616565-1: RNCC: 3 | RNVC: 2

7 Dec 1999

5975-01-667-1259
Electronic Equipment Mounting Tray

016671259
3365541-1: RNCC: 3 | RNVC: 2

4 Oct 2017

5975-01-666-4663
Electrical-Electronic Equipment Panel

016664663
FATS0002: RNCC: 3 | RNVC: 2
1020903: RNCC: 5 | RNVC: 2
1020903: RNCC: 5 | RNVC: 2

7 Sep 2017

5975-01-666-7487
Electronic Equipment Mounting Tray

016667487
352SK219-103: RNCC: 3 | RNVC: 2

19 Sep 2017

5975-01-666-6467
Electrical-Electronic Equipment Panel

016666467
352SK190-103: RNCC: 3 | RNVC: 2

14 Sep 2017

5975-01-667-1072
Electrical Conduit Locknut

016671072
LNB-20: RNCC: 3 | RNVC: 2
LNB-20: RNCC: 5 | RNVC: 2
LIQLNB-20: RNCC: 5 | RNVC: 2
LNB-20: RNCC: 5 | RNVC: 9

4 Oct 2017

5975-01-666-4650
Electrical-Electronic Equipment Panel

016664650
FATS0003: RNCC: 3 | RNVC: 2
1020906: RNCC: 5 | RNVC: 2
1020906: RNCC: 5 | RNVC: 2

7 Sep 2017

5975-01-667-0862
Stuffing Tube

016670862
BVIVG-U439: RNCC: 3 | RNVC: 2

3 Oct 2017

5975-01-667-0882
Stuffing Tube

016670882
BVNV-P299: RNCC: 3 | RNVC: 2

3 Oct 2017

5975-01-667-8510
Electrical Equipment Cabinet

016678510
NET-ACCESS S6512B: RNCC: 3 | RNVC: 2

1 Nov 2017

5975-01-668-2105
Junction Box

016682105
352E2517-1: RNCC: 3 | RNVC: 2
352EK255-1: RNCC: 5 | RNVC: 2

14 Nov 2017

5975-01-668-0702
Electrical Equipment Rack

016680702
011-02515-00: RNCC: 3 | RNVC: 2

8 Nov 2017

5975-01-358-5972
Electrical Conduit Coupling

013585972
77C722928P003: RNCC: 3 | RNVC: 2

16 May 1992

5975-01-361-3697
Electrical Conduit Bend

013613697
68A311262-2023: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-01-327-2234
Electrical-Electronic Equipment Chassis

013272234
4-139003-04: RNCC: 3 | RNVC: 2

10 Oct 1990

5975-01-367-6059
Electrical Tie Down Mounting Base

013676059
SMS-A-14: RNCC: 3 | RNVC: 2

15 Nov 1992

5975-01-368-3342
Electrical Conduit Locknut

013683342
7415043P005: RNCC: 3 | RNVC: 2

29 Nov 1992

5975-01-368-1626
Conduit Outlet Cover

013681626
100779: RNCC: 3 | RNVC: 2

27 Nov 1992

5975-01-368-3384
Electrical Box Connector

013683384
2256: RNCC: 3 | RNVC: 2
BS-72101: RNCC: D | RNVC: 9

29 Nov 1992

5975-01-429-8198
Cable Marker Sleeve

014298198
N13714-050-003: RNCC: 3 | RNVC: 2

19 Apr 1996

5975-01-429-8033
Cable Marker Sleeve

014298033
N13714-050-001: RNCC: 3 | RNVC: 2

18 Apr 1996

5975-01-429-8201
Cable Marker Sleeve

014298201
N13714-050-006: RNCC: 3 | RNVC: 2

19 Apr 1996

5975-01-665-6711
Interconnecting Box

016656711
01126000: RNCC: 3 | RNVC: 2
A-126: RNCC: 5 | RNVC: 2

8 Aug 2017

5975-01-664-2733
Electrical-Electronic Equipment Chassis

016642733
N77-C7706: RNCC: 3 | RNVC: 2

13 Jun 2017

5975-01-324-2907
Ground Rod

013242907
GR6258: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-324-7473
Electrical Equipment Mounting Base

013247473
800959: RNCC: 3 | RNVC: 2

22 Aug 1990

5975-01-428-3305
Electrical Equipment Shelf

014283305
08903-00149: RNCC: 3 | RNVC: 2
08903-00149: RNCC: 3 | RNVC: 9
08903-00149: RNCC: 5 | RNVC: 9

25 Mar 1996

5975-01-305-1609
Electrical-Electronic Equipment Panel

013051609
156070-1: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-662-1050
Electrical-Electronic Equipment Panel

016621050
1629-4147: RNCC: 3 | RNVC: 2

27 Mar 2017

5975-01-661-9765
Electrical-Electronic Equipment Panel

016619765
241-4627: RNCC: 3 | RNVC: 2

22 Mar 2017

5975-01-662-0512
Electrical Equipment Drawer

016620512
KVT419A-8UV-R2: RNCC: 3 | RNVC: 2

24 Mar 2017

5975-01-662-4637
Switch Terminal Cover

016624637
228-7280: RNCC: 3 | RNVC: 2

7 Apr 2017

5975-01-663-4817
Electrical Equipment Rack

016634817
IR829-DINRAIL=: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-369-8056
Electrical Equipment Rack

013698056
04680-00-001: RNCC: 3 | RNVC: 9

7 Jan 1993

5975-01-324-2771
Stand-Off Bushing

013242771
130-03-AL-6-32P: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-324-2774
Stand-Off Bushing

013242774
130-03-AL-8-32P: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-324-5969
Cable Hanger

013245969
5051T97G01: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-292-0032
Ground Rod

012920032
131224-100: RNCC: 3 | RNVC: 2
131224-001: RNCC: 5 | RNVC: 9

10 Jan 1989

5975-01-660-8921
Electrical-Electronic Equipment Chassis

016608921
AT-TN-250G-B: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-660-8880
Electrical-Electronic Equipment Chassis

016608880
39593-40606-2: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-397-6755
Rigid Metal Conduit

013976755
1310-0101-10: RNCC: 3 | RNVC: 2
1310-0101-10: RNCC: 5 | RNVC: 9

18 Oct 1994

5975-01-397-8547
Wire Strand Hanger Safety Strap

013978547
541-8182-002: RNCC: 3 | RNVC: 2

21 Oct 1994

5975-01-398-1893
Rigid Metal Conduit

013981893
1310-0101-37: RNCC: 3 | RNVC: 2
1310-0101-37: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-398-1889
Rigid Metal Conduit

013981889
1310-0101-41: RNCC: 3 | RNVC: 2
1310-0101-41: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-398-1887
Rigid Metal Conduit

013981887
1310-0101-34: RNCC: 3 | RNVC: 2
1310-0101-34: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-00-574-4247
Electrical-Electronic Equipment Chassis

005744247
8166530: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-362-9559
Groundin Receptacle

013629559
56718-001: RNCC: 3 | RNVC: 2

19 Aug 1992

5975-01-683-7659
Electrical Equipment Mounting Base

016837659
RAM-D-101U-246: RNCC: 3 | RNVC: 2
RAM-D-101U-246: RNCC: 5 | RNVC: 2
BU00.199.0161: RNCC: 5 | RNVC: 2

7 Oct 2019

5975-01-684-5746
Electrical Box Connector

016845746
0845893-212: RNCC: 3 | RNVC: 2

7 Nov 2019

5975-01-685-8769
Electrical Equipment Mounting Base

016858769
16E6053-1: RNCC: 3 | RNVC: 2
16E6053-1: RNCC: 5 | RNVC: 2

17 Jan 2020

5975-01-685-9031
Ground Rod

016859031
1008082: RNCC: 3 | RNVC: 2
1008082: RNCC: 5 | RNVC: 2

21 Jan 2020

5975-01-685-9533
Mounting Plate

016859533
STK-RACKMNT-2955=: RNCC: 3 | RNVC: 2

23 Jan 2020

5975-01-685-5195
Electrical Fitting Mounting Base

016855195
UHK92164-1: RNCC: 3 | RNVC: 2

20 Dec 2019

5975-01-685-3629
Electrical-Electronic Equipment Panel

016853629
RFE23050606-503: RNCC: 3 | RNVC: 2
RFE23050606-503: RNCC: 3 | RNVC: 9

12 Dec 2019

5975-01-686-5622
Electrical Equipment Drawer

016865622
EXD-002UL-R00: RNCC: 3 | RNVC: 2

24 Feb 2020

5975-01-289-8991
Cable Hanger

012898991
2D12654G01: RNCC: 3 | RNVC: 2

2 Dec 1988

5975-01-291-0360
Wall Support Rack

012910360
0020650730: RNCC: 3 | RNVC: 2
2065-7: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-01-362-7779
Electrical-Electronic Equipment Panel

013627779
037-00206-0000: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-01-362-4747
Electrical-Electronic Equipment Panel

013624747
921101180-009: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-424-3707
Electronic Equipment Mounting Tray

014243707
622-5508-002: RNCC: 3 | RNVC: 2

26 Jan 1996

5975-01-681-7402
Electrical Wall Plate

016817402
72D420800-2005: RNCC: 3 | RNVC: 2

2 Jul 2019

5975-01-682-7069
Electrical Components Tie Down Strap

016827069
304-7078: RNCC: 3 | RNVC: 2

20 Aug 2019

5975-01-683-1469
Electrical Equipment Mounting Base

016831469
200-100283-103: RNCC: 3 | RNVC: 2

11 Sep 2019

5975-01-683-8866
Electrical Cable Nipple

016838866
226N3V02: RNCC: 3 | RNVC: 2

11 Oct 2019

5975-01-683-9954
Radio Frequency Cable Splicing Kit

016839954
ORCARX-SKHLX102: RNCC: 3 | RNVC: 2

16 Oct 2019

5975-01-394-2883
Electrical Conduit Nipple

013942883
006-2-WB017-12-1: RNCC: 3 | RNVC: 2
006-2-WB017-12-1: RNCC: 3 | RNVC: 9
HP-006-2-WB017-12-1: RNCC: 5 | RNVC: 9
006-2-WB017-12-1: RNCC: 5 | RNVC: 9

6 Aug 1994

5975-01-394-5063
Electrical Conduit Coupling Nut

013945063
BACN10WW8A1: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-394-5062
Electrical Conduit Coupling Nut

013945062
BACN10WW6A1: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-00-419-4913
Flexible Metal Conduit Assembly

004194913
68PA1235-10: RNCC: 3 | RNVC: 2

11 Dec 1970

5975-01-318-3074
Junction Box

013183074
54F2F-1: RNCC: 3 | RNVC: 9
54F2F-1/ONE DSS-3 CABLE: RNCC: 5 | RNVC: 2
54F2F-1: RNCC: 5 | RNVC: 2

15 Apr 1990

5975-01-360-0164
Electrical Equipment Rack

013600164
8861728: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-01-424-0268
Electrical Equipment Rack

014240268
7518: RNCC: 3 | RNVC: 2

18 Jan 1996

5975-01-679-3545
Electrical-Electronic Equipment Chassis

016793545
MX80BASE-T: RNCC: 3 | RNVC: 2
MX80BASE-T: RNCC: 5 | RNVC: 2

20 Mar 2019

5975-01-679-8819
Electrical-Electronic Equipment Panel

016798819
3799-3109: RNCC: 3 | RNVC: 2

12 Apr 2019

5975-01-393-4374
Cable Terminal Chamber

013934374
163304-4: RNCC: 3 | RNVC: 2

20 Jul 1994

5975-01-432-7218
Flexible Metal Conduit Assembly

014327218
10250675-95: RNCC: 3 | RNVC: 2

12 Jun 1996

5975-01-317-2260
Cable Marker Sleeve

013172260
SS7074-1825: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-317-5643
Electrical-Electronic Equipment Chassis

013175643
516576: RNCC: 3 | RNVC: 2

1 Apr 1990

5975-01-447-2771
Electrical Grounding Plate

014472771
34-066859-01: RNCC: 3 | RNVC: 2
34-066859-01: RNCC: 5 | RNVC: 9

31 Jul 1997

5975-01-421-3392
Blank Panel

014213392
7597644P1: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-677-0252
Illumination Box

016770252
70600-82161-043: RNCC: 3 | RNVC: 2

26 Nov 2018

5975-01-677-7260
Electrical-Electronic Equipment Chassis

016777260
798153-B21: RNCC: 3 | RNVC: 2

3 Jan 2019

5975-01-678-1849
Electrical Equipment Rack

016781849
RCA42612SPBE: RNCC: 3 | RNVC: 2
RAA42612PSB13: RNCC: 5 | RNVC: 2

25 Jan 2019

5975-01-678-8601
Electrical Conduit Adapter

016788601
36-015: RNCC: 3 | RNVC: 2

1 Mar 2019

5975-01-678-8488
Electrical-Electronic Equipment Chassis

016788488
MX960BASE-AC-ECM: RNCC: 3 | RNVC: 2
MX960BASE-AC-ECM: RNCC: 5 | RNVC: 2

28 Feb 2019

5975-01-678-8616
Electrical Conduit Adapter

016788616
36-013: RNCC: 3 | RNVC: 2

1 Mar 2019

5975-01-491-0028
Flexible Metal Conduit Assembly

014910028
227677-DL0000: RNCC: 3 | RNVC: 2
17B2E2000: RNCC: 7 | RNVC: 2

9 Oct 2001

5975-01-461-0117
Electrical Box Connector

014610117
CRN1137-8: RNCC: 3 | RNVC: 2

24 Nov 1998

5975-01-461-2340
Flexible Metal Conduit Assembly

014612340
230734-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-561: RNCC: 7 | RNVC: 2

4 Dec 1998

5975-01-461-2367
Flexible Metal Conduit Assembly

014612367
759-498-511: RNCC: 3 | RNVC: 2
226484-DL000: RNCC: 3 | RNVC: 2
17B2E2000-511: RNCC: 7 | RNVC: 2

9 Jul 2020

5975-01-461-5341
Electrical-Electronic Equipment Chassis

014615341
10535-4000-03: RNCC: 3 | RNVC: 2

16 Dec 1998

5975-01-446-4484
Electrical Grounding Plate

014464484
634-2551-001: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-01-447-6262
Shop Set Installation Electrical Kit

014476262
T86J900: RNCC: 3 | RNVC: 2

11 Aug 1997

5975-00-832-2145
Rim Clinching Clamp

008322145
604026: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-675-2087
Electrical Equipment Shelf

016752087
XES-2619: RNCC: 3 | RNVC: 2

28 Aug 2018

5975-01-674-6514
Electrical Grounding Plate

016746514
8716112-1: RNCC: 3 | RNVC: 2

6 Aug 2018

5975-01-677-1101
Electrical Components Tie Down Strap

016771101
BT1M-M: RNCC: 3 | RNVC: 2

28 Nov 2018

5975-00-355-5558
Cable Marker Sleeve

003555558
446712-30: RNCC: 3 | RNVC: 2

6 Feb 1974

5975-01-488-4461
Electrical-Electronic Equipment Chassis

014884461
8520126-901-AA: RNCC: 3 | RNVC: 2

24 Aug 2001

5975-01-487-5916
Blank Panel

014875916
061719: RNCC: 3 | RNVC: 2

10 Aug 2001

5975-01-568-3291
Electrical Equipment Mounting Base

015683291
33-83151: RNCC: 3 | RNVC: 2

27 Oct 2008

5975-01-569-1604
Electrical Equipment Mounting Base

015691604
822-1082-101: RNCC: 3 | RNVC: 2

20 Nov 2008

5975-01-569-4953
Electrical Bushing

015694953
RL16-7: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-569-8114
Electrical Standardized Components Case Section

015698114
204-32736-1: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-570-1724
Electrical Equipment Rack Base

015701724
14710-7: RNCC: 3 | RNVC: 2
U9426: RNCC: 5 | RNVC: 2

17 Dec 2008

5975-01-241-1320
Electrical Grounding Plate

012411320
200805-001: RNCC: 3 | RNVC: 9

23 Sep 1986

5975-01-448-6395
Blank Panel

014486395
204-18852-36: RNCC: 3 | RNVC: 2

5 Sep 1997

5975-01-672-3096
Electrical-Electronic Equipment Chassis

016723096
8527290-901: RNCC: 3 | RNVC: 2

26 Apr 2018

5975-01-487-6947
Cable Marker Sleeve

014876947
G23630: RNCC: 3 | RNVC: 2
G95986: RNCC: D | RNVC: 9

14 Aug 2001

5975-01-486-9057
Electrical-Electronic Equipment Chassis

014869057
505431: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-486-8991
Electrical-Electronic Equipment Chassis

014868991
505435: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-487-1713
Blank Panel

014871713
069621: RNCC: 3 | RNVC: 2

26 Jul 2001

5975-01-487-8650
Cable Marker Sleeve

014878650
G21642: RNCC: 3 | RNVC: 2
G95778: RNCC: D | RNVC: 9

21 Aug 2001

5975-01-564-0625
Electrical Equipment Mounting Base

015640625
12459-1: RNCC: 3 | RNVC: 2

3 Jun 2008

5975-01-563-4199
Electrical Bushing

015634199
RW309-8: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-5999
Electrical-Electronic Equipment Chassis

015635999
C99A9429-2: RNCC: 1 | RNVC: 3
C99A9429-5: RNCC: 3 | RNVC: 3

14 May 2008

5975-01-564-1482
Electrical Cable Assembly Protector

015641482
6700487: RNCC: 3 | RNVC: 2

5 Jun 2008

5975-01-458-9259
Electronic Equipment Mounting Tray

014589259
840-5004-030: RNCC: 3 | RNVC: 2

15 Sep 1998

5975-01-458-8401
Electrical-Electronic Equipment Chassis

014588401
561-10737A: RNCC: 3 | RNVC: 2
561-10737A: RNCC: 5 | RNVC: 9
10737: RNCC: 5 | RNVC: 9

11 Sep 1998

5975-01-458-0310
Cable Support Panel

014580310
558329-1: RNCC: 3 | RNVC: 2
558329-1: RNCC: 5 | RNVC: 9

11 Aug 1998

5975-01-443-8267
Electrical Conduit Adapter

014438267
10250710-47: RNCC: 3 | RNVC: 2
G63164-47: RNCC: 5 | RNVC: 2

18 Apr 1997

5975-01-443-8261
Electrical Conduit Elbow

014438261
10250674-6: RNCC: 3 | RNVC: 2

18 Apr 1997

5975-01-653-0067
Electrical Equipment Rack

016530067
328-302010-001: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-654-4760
Electrical-Electronic Equipment Chassis

016544760
ACP-4340BP-00XE: RNCC: 3 | RNVC: 2

29 Apr 2016

5975-00-395-1722
Drive Ring

003951722
6A8473: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-484-4997
Cable Marker Sleeve

014844997
2540806-87: RNCC: 3 | RNVC: 2
2540806-87: RNCC: 5 | RNVC: 9

30 Apr 2001

5975-00-378-7421
Rigid Metal Conduit

003787421
WWC563: RNCC: 4 | RNVC: 1

16 Mar 1974

5975-01-457-0323
Electrical-Electronic Equipment Chassis

014570323
303656-001: RNCC: 3 | RNVC: 2

8 Jul 1998

5975-01-457-3203
Electrical-Electronic Equipment Chassis

014573203
190A873-1: RNCC: 3 | RNVC: 2

20 Jul 1998

5975-01-458-0312
Electrical Wall Plate

014580312
555650-1: RNCC: 3 | RNVC: 2
555650-1: RNCC: 5 | RNVC: 9

11 Aug 1998

5975-01-458-2209
Electrical-Electronic Equipment Chassis

014582209
3512PE-250: RNCC: 3 | RNVC: 2

18 Aug 1998

5975-01-443-0058
Electrical Equipment Rack

014430058
85043C/230: RNCC: 3 | RNVC: 2

28 Mar 1997

5975-01-443-3046
Electrical Equipment Rack

014433046
J1450A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-651-1388
Electrical Equipment Cabinet

016511388
LWC252015: RNCC: 3 | RNVC: 2

6 Jan 2016

5975-01-653-3958
Consolet

016533958
C16C20: RNCC: 3 | RNVC: 2

22 Mar 2016

5975-01-653-1632
Electrical-Electronic Equipment Chassis

016531632
BB601W: RNCC: 3 | RNVC: 2

14 Mar 2016

5975-01-483-1767
Electrical Cable Protector

014831767
00-13159-01: RNCC: 3 | RNVC: 2
00-13159-01: RNCC: 5 | RNVC: 2

19 Mar 2001

5975-01-483-6574
Cable Marker Sleeve

014836574
SS7074-1507: RNCC: 3 | RNVC: 2

4 Apr 2001

5975-01-483-6245
Electrical Equipment Rack Base

014836245
123SCAV5641-5: RNCC: 1 | RNVC: 2
20E772-1: RNCC: 3 | RNVC: 2
123SCAV5641-5: RNCC: 5 | RNVC: 9

4 Apr 2001

5975-01-483-8725
Electrical Conduit Adapter

014838725
712GS116A1724C5: RNCC: 3 | RNVC: 2

10 Apr 2001

5975-01-484-4995
Cable Marker Sleeve

014844995
2540806-62: RNCC: 3 | RNVC: 2
2540806-62: RNCC: 5 | RNVC: 9

30 Apr 2001

5975-01-481-2291
Electrical Conduit Elbow

014812291
10601-TB: RNCC: 3 | RNVC: 2
AS72182-1: RNCC: 5 | RNVC: 2
10601: RNCC: 5 | RNVC: 9

22 Dec 2000

5975-01-555-7455
Electrical Equipment Rack

015557455
LFC-B: RNCC: 3 | RNVC: 2

12 Sep 2007

5975-01-457-0714
Nonmetallic Raceway

014570714
LD3IG6-A: RNCC: 3 | RNVC: 2

9 Jul 1998

5975-01-259-5219
Blade

012595219
8000-417D: RNCC: 3 | RNVC: 2
8000457D: RNCC: 5 | RNVC: 2

18 Jul 1987

5975-01-300-7581
Electrical-Electronic Equipment Chassis

013007581
IV1691-4S: RNCC: 3 | RNVC: 2

18 May 1989

5975-01-260-1435
Electrical Equipment Drawer

012601435
016-0362-01: RNCC: 3 | RNVC: 2

26 Jul 1987

5975-01-302-8207
Electrical Components Tie Down Strap

013028207
PLT2I-M20: RNCC: 3 | RNVC: 2
0223131: RNCC: 5 | RNVC: 9

20 Jun 1989

5975-01-440-6989
Blank Panel

014406989
959143-101: RNCC: 3 | RNVC: 2

22 Jan 1997

5975-01-441-2623
Electrical Components Tie Down Strap

014412623
7168419-00: RNCC: 3 | RNVC: 2

6 Feb 1997

5975-01-441-8181
Electrical Equipment Rack

014418181
SA7XR-AK: RNCC: 3 | RNVC: 2
364888-011: RNCC: 5 | RNVC: 2

25 Feb 1997

5975-01-442-3070
Lock Pin Plate Positioning

014423070
111-D6122-1: RNCC: 3 | RNVC: 2

11 Mar 1997

5975-01-444-2841
Fanning Strip

014442841
LS5957B032: RNCC: 3 | RNVC: 2

2 May 1997

5975-01-444-0377
Electrical Equipment Rack

014440377
10488-3230-01: RNCC: 3 | RNVC: 2

25 Apr 1997

5975-00-630-2003
Flexible Metal Conduit Assembly

006302003
9033123: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-649-0246
Electrical Cable Protector

016490246
VC-343-8-RED: RNCC: 3 | RNVC: 2

15 Oct 2015

5975-01-650-5776
Electrical Equipment Rack Base

016505776
0130-7100-01: RNCC: 3 | RNVC: 2

10 Dec 2015

5975-01-480-7703
Electrical Components Tie Down Strap

014807703
204VN15021-1: RNCC: 3 | RNVC: 9

5 Dec 2000

5975-01-480-5877
Electrical-Electronic Equipment Chassis

014805877
CU50428: RNCC: 3 | RNVC: 2
CU50428: RNCC: 3 | RNVC: 9

28 Nov 2000

5975-01-606-9379
Electrical-Electronic Equipment Panel

016069379
7250795: RNCC: 3 | RNVC: 2

25 May 2012

5975-01-607-5056
Electrical-Electronic Equipment Panel

016075056
185051-0002: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-608-1600
Electrical Equipment Rack

016081600
922354-15: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-454-2908
Electronic Cabinet

014542908
817-2070-001: RNCC: 3 | RNVC: 2

25 Mar 1998

5975-01-454-8318
Junction Box

014548318
5517967: RNCC: 3 | RNVC: 2
5975PL0841422: RNCC: 6 | RNVC: 9

14 Apr 1998

5975-01-454-0592
Electrical Tie Down Mounting Base

014540592
TM2PWH25: RNCC: 3 | RNVC: 2
9D0222-2: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-01-297-9558
Electrical Equipment Rack

012979558
V4DTB-2: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-297-7126
Flexible Nonmetallic Conduit

012977126
85707-03: RNCC: 3 | RNVC: 2

6 Apr 1989

5975-01-444-0370
Electrical Equipment Rack

014440370
10488-1150-01: RNCC: 3 | RNVC: 2

25 Apr 1997

5975-00-626-8026
Cabinet Assembly

006268026
6873510: RNCC: 3 | RNVC: 2

5 Mar 1975

5975-01-647-4941
Blank Panel

016474941
304A024-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-648-7371
Electrical Equipment Shelf

016487371
284A3700-97: RNCC: 3 | RNVC: 2

5 Oct 2015

5975-01-648-8361
Junction Box Extension

016488361
284A3223-14: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-648-7370
Electrical Equipment Shelf

016487370
284A3700-89: RNCC: 3 | RNVC: 2

5 Oct 2015

5975-01-649-5680
Junction Box Assembly

016495680
2841B1839-103: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-00-395-9499
Switch Plate

003959499
SM-B-148594: RNCC: 3 | RNVC: 2
533LX: RNCC: 5 | RNVC: 2
11545: RNCC: 5 | RNVC: 9
52998: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-463-6481
Electrical-Electronic Equipment Chassis

014636481
2215317-001: RNCC: 3 | RNVC: 2

30 Mar 1999

5975-01-477-8048
Electrical Conduit Locknut

014778048
97-3066-6: RNCC: 3 | RNVC: 2
97-3066-6: RNCC: 3 | RNVC: 9

18 Aug 2000

5975-01-479-6083
Electrical Equipment Mounting Base

014796083
C99A9107-3: RNCC: 1 | RNVC: 3
812880-801: RNCC: 3 | RNVC: 3

26 Oct 2000

5975-01-601-4330
Electrical Equipment Shelf

016014330
ER-S1: RNCC: 3 | RNVC: 2
VMP-ER-S1: RNCC: 3 | RNVC: 9

19 Jan 2012

5975-01-601-5469
Junction Box

016015469
H280111-1: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-452-1027
Electrical Box Divider

014521027
3353791-1: RNCC: 3 | RNVC: 2

15 Jan 1998

5975-01-451-9450
Cable Marker Sleeve

014519450
013-007382-022: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-451-9455
Cable Marker Sleeve

014519455
013-007382-015: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-438-7435
Cable Spacer

014387435
10675936: RNCC: 3 | RNVC: 2

19 Nov 1996

5975-01-440-9080
Electrical-Electronic Equipment Chassis

014409080
7220529-01: RNCC: 3 | RNVC: 2

28 Jan 1997

5975-01-646-9451
Electrical Equipment Mounting Base

016469451
92-100237-100: RNCC: 3 | RNVC: 2

5 Aug 2015

5975-01-646-6572
Electrical Conduit Coupling Nut

016466572
7513K317: RNCC: 3 | RNVC: 2

27 Jul 2015

5975-01-524-0520
Electrical-Electronic Equipment Panel

015240520
G7404-08: RNCC: 3 | RNVC: 2

22 Sep 2004

5975-01-452-0735
Junction Box

014520735
3351953-3: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-452-2464
Box Iron Lung Assembly

014522464
374280-1R: RNCC: 3 | RNVC: 2

21 Jan 1998

5975-01-388-2539
Electrical Equipment Cabinet

013882539
1980639: RNCC: 3 | RNVC: 2

25 Mar 1994

5975-01-436-6294
Blank Panel

014366294
17G231541-1: RNCC: 3 | RNVC: 2
17G231541: RNCC: D | RNVC: 9

24 Sep 1996

5975-01-435-8086
Electronic Equipment Mounting Tray

014358086
622-7745-001: RNCC: 3 | RNVC: 2
16VE293001: RNCC: 7 | RNVC: 2

3 Sep 1996

5975-01-645-7098
Cable Hanger

016457098
77D617189: RNCC: 3 | RNVC: 2
77D617189: RNCC: 5 | RNVC: 2
77D617189: RNCC: 5 | RNVC: 9

25 Jun 2015

5975-01-462-3353
Junction Box Assembly

014623353
4851-1: RNCC: 3 | RNVC: 2
4851: RNCC: 5 | RNVC: 2

29 Jan 1999

5975-01-450-5306
Harness Cover

014505306
3824910-4: RNCC: 3 | RNVC: 2

13 Nov 1997

5975-01-440-9932
Electrical Equipment Rack

014409932
PB16HC: RNCC: 3 | RNVC: 2
2004421W00: RNCC: 5 | RNVC: 2
2004421W00: RNCC: 5 | RNVC: 9

30 Jan 1997

5975-01-644-4654
Electrical-Electronic Equipment Chassis

016444654
R105646-01: RNCC: 3 | RNVC: 2

6 May 2015

5975-01-645-7097
Cable Hanger

016457097
77D617190P1: RNCC: 3 | RNVC: 2
77D617190P001: RNCC: 5 | RNVC: 2
77D617190P1: RNCC: 5 | RNVC: 2
77D617190P001: RNCC: 5 | RNVC: 9
77D617190P1: RNCC: 5 | RNVC: 9

25 Jun 2015

5975-01-461-3119
Electric Rack Tool Kit

014613119
D4984: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-461-2333
Flexible Metal Conduit Assembly

014612333
230732-DL0000: RNCC: 3 | RNVC: 2
759-498-557: RNCC: 5 | RNVC: 2
203732-DL0000: RNCC: 5 | RNVC: 9
17B2E2000-557: RNCC: 7 | RNVC: 2

4 Dec 1998

5975-01-520-7577
Electrical-Electronic Equipment Panel

015207577
37761-2039-1: RNCC: 3 | RNVC: 2

25 May 2004

5975-00-501-0564
Flexible Metal Conduit Assembly

005010564
XH6579: RNCC: 3 | RNVC: 2
4394793-520: RNCC: 3 | RNVC: 2
C175-0250-3408-5757: RNCC: 3 | RNVC: 2
C175-0250-3408-5757: RNCC: 5 | RNVC: 9
4394793-520: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-270-9073
Electrical-Electronic Equipment Chassis

012709073
2085810-1: RNCC: 3 | RNVC: 2

15 Jan 1988

5975-01-439-1061
Electrical-Electronic Equipment Chassis

014391061
7239014-14: RNCC: 3 | RNVC: 2

27 Nov 1996

5975-01-643-9585
Electrical-Electronic Equipment Chassis

016439585
E7X71A: RNCC: 3 | RNVC: 2

17 Apr 2015

5975-01-644-0974
Electrical Equipment Rack

016440974
AR2400: RNCC: 3 | RNVC: 2

22 Apr 2015

5975-01-459-2051
Raceway Cover

014592051
8902-7: RNCC: 3 | RNVC: 2

24 Sep 1998

5975-01-459-7542
Junction Box

014597542
414E3629-1: RNCC: 3 | RNVC: 2

14 Oct 1998

5975-01-459-8608
Electrical Equipment Mounting Base

014598608
500-620499-C: RNCC: 3 | RNVC: 2
500-620499-C: RNCC: 5 | RNVC: 9

16 Oct 1998

5975-01-459-8642
Electrical-Electronic Equipment Chassis

014598642
002455-0: RNCC: 3 | RNVC: 9

16 Oct 1998

5975-01-459-6713
Junction Box

014596713
500-047504: RNCC: 3 | RNVC: 2
500-047504: RNCC: 5 | RNVC: 9

9 Oct 1998

5975-01-460-3216
Electrical Equipment Rack

014603216
5620A-168-014: RNCC: 3 | RNVC: 2
5620A-168-014: RNCC: 3 | RNVC: 9
5620A-168-014: RNCC: 5 | RNVC: 2
5620A-168-014: RNCC: 5 | RNVC: 9
HP5620A-168-014: RNCC: 5 | RNVC: 9

2 Nov 1998

5975-01-460-9227
Electrical-Electronic Equipment Chassis

014609227
11441620: RNCC: 3 | RNVC: 2

20 Nov 1998

5975-01-460-2326
Electrical Equipment Mounting Base

014602326
622-8614-400: RNCC: 3 | RNVC: 2

29 Oct 1998

5975-01-460-9229
Electrical-Electronic Equipment Chassis

014609229
11441518: RNCC: 3 | RNVC: 2

20 Nov 1998

5975-01-579-6610
Electrical-Electronic Equipment Chassis

015796610
ACS-1800-RM-19: RNCC: 3 | RNVC: 2

19 Nov 2009

5975-01-580-9739
Electrical-Electronic Equipment Chassis

015809739
IDEPRODRWRBK: RNCC: 3 | RNVC: 2

31 Dec 2009

5975-01-582-2110
Electrical-Electronic Equipment Panel

015822110
681111-2: RNCC: 3 | RNVC: 2

11 Feb 2010

5975-01-581-5692
Junction Box Cover

015815692
915405-3: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-515-2679
Electrical Conduit Adapter

015152679
600122-611-002: RNCC: 3 | RNVC: 2

19 Nov 2003

5975-01-518-1552
Cable Marker Sleeve

015181552
HS032WE1WF152S: RNCC: 3 | RNVC: 2

3 Mar 2004

5975-01-447-2387
Chassis Base

014472387
34-103976-01: RNCC: 3 | RNVC: 2
34-103976-01: RNCC: 5 | RNVC: 9

30 Jul 1997

5975-01-447-8886
Electrical-Electronic Equipment Panel

014478886
77-099101-01: RNCC: 3 | RNVC: 2
77-099101-01: RNCC: 5 | RNVC: 9

15 Aug 1997

5975-01-448-1772
Electrical Wall Plate

014481772
91307-1: RNCC: 3 | RNVC: 2

22 Aug 1997

5975-01-448-2950
Electronic Equipment Mounting Tray

014482950
93601-2: RNCC: 3 | RNVC: 2

26 Aug 1997

5975-01-661-0207
Electrical Equipment Rack

016610207
790357-B21: RNCC: 3 | RNVC: 2

14 Feb 2017

5975-01-662-3634
Electrical Equipment Mounting Base

016623634
010-12445-32: RNCC: 3 | RNVC: 2

4 Apr 2017

5975-01-663-2929
Electrical Equipment Cabinet

016632929
2713502: RNCC: 3 | RNVC: 2

4 May 2017

5975-01-663-5046
Electronic Equipment Mounting Tray

016635046
352E3031-13: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-664-9130
Electronic Equipment Mounting Tray

016649130
652-3934-001: RNCC: 3 | RNVC: 2

11 Jul 2017

5975-01-663-8170
Electrical Equipment Mounting Base

016638170
RAM-101U-B-2461: RNCC: 3 | RNVC: 2
91995406: RNCC: 5 | RNVC: 2

24 May 2017

5975-01-385-2052
Electrical Equipment Cabinet

013852052
M042A029-03: RNCC: 3 | RNVC: 2

6 Jan 1994

5975-01-044-8950
Electrical Components Tie Down Strap

010448950
TY-46MD-6: RNCC: 3 | RNVC: 2
PL2M2S-D6: RNCC: 3 | RNVC: 2

22 Jul 1977

5975-00-394-2524
Ignition Cab Marker

003942524
AN4028-1: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-01-458-4452
Electrical-Electronic Equipment Chassis

014584452
00-359458-00002: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-00-503-0261
Flexible Metal Conduit Assembly

005030261
5334403-596: RNCC: 3 | RNVC: 2
5334403-596: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-446-1238
Electrical-Electronic Equipment Panel

014461238
808503: RNCC: 3 | RNVC: 2
808503: RNCC: 3 | RNVC: 9
808503: RNCC: 5 | RNVC: 2

23 Jun 1997

5975-01-316-4004
Electrical Equipment Mounting Base

013164004
3614258-0802: RNCC: 3 | RNVC: 2

8 Mar 1990

5975-01-446-8279
Junction Box

014468279
2439658-2: RNCC: 3 | RNVC: 2

17 Jul 1997

5975-01-656-3716
Conduit Outlet Cover

016563716
74A314077-2003: RNCC: 3 | RNVC: 2
74A314077: RNCC: D | RNVC: 9

28 Jun 2016

5975-01-656-3302
Blank Panel

016563302
UCSC-BBLKD-L: RNCC: 3 | RNVC: 2

27 Jun 2016

5975-01-656-2051
Electric Component Rail Guide Stop

016562051
PSB-ENDSP: RNCC: 3 | RNVC: 2
40100115: RNCC: 5 | RNVC: 2

21 Jun 2016

5975-01-383-1717
Blank Panel

013831717
392001: RNCC: 3 | RNVC: 2
10350827: RNCC: 6 | RNVC: 9

19 Nov 1993

5975-01-384-5968
Electronic Equipment Mounting Tray

013845968
65-22501-27: RNCC: 3 | RNVC: 2

18 Dec 1993

5975-01-572-9973
Flexible Metal Conduit Assembly

015729973
347124-2005: RNCC: 3 | RNVC: 2

2 Apr 2009

5975-01-573-8585
Electrical Equipment Rack

015738585
RX1880-1: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-572-7608
Conduit Outlet Cover

015727608
CHS2R2IG-X: RNCC: 3 | RNVC: 2
C10414: RNCC: 5 | RNVC: 2

24 Mar 2009

5975-01-574-2037
Electrical Equipment Mounting Base

015742037
120-250-006: RNCC: 3 | RNVC: 2
120-250-006: RNCC: 5 | RNVC: 2
120-250-006: RNCC: 5 | RNVC: 9

19 May 2009

5975-01-574-5699
Electrical-Electronic Equipment Chassis

015745699
ECIMLN-MSW5049-9: RNCC: 3 | RNVC: 2

1 Jun 2009

5975-01-316-6316
Electrical Equipment Mounting Base

013166316
962680-111: RNCC: 3 | RNVC: 2

13 Mar 1990

5975-01-651-3467
Electrical Equipment Shelf

016513467
7-511115248-001: RNCC: 3 | RNVC: 2

14 Jan 2016

5975-01-695-8371
Junction Box

016958371
VJ606HW: RNCC: 3 | RNVC: 2

25 Jun 2021

5975-01-381-0671
Electrical-Electronic Equipment Chassis

013810671
13031264: RNCC: 3 | RNVC: 2

7 Oct 1993

5975-01-454-6062
Electrical-Electronic Equipment Chassis

014546062
RA-ISPE: RNCC: 3 | RNVC: 9

7 Apr 1998

5975-01-455-3793
Electrical Tie Down Mounting Base

014553793
CB4020V3N6-750: RNCC: 3 | RNVC: 2
9D0271-101T: RNCC: 5 | RNVC: 2

30 Apr 1998

5975-01-456-1345
Junction Box

014561345
38429: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-596-2954
Blank Panel

015962954
401855-01: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-597-8105
Electrical Wall Plate

015978105
CBEIGY: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-571-1514
Electrical-Electronic Equipment Panel

015711514
988-5534-001: RNCC: 3 | RNVC: 2

26 Jan 2009

5975-01-644-1978
Line Supporting Strap

016441978
B-3852-5-0: RNCC: 3 | RNVC: 2

24 Apr 2015

5975-01-644-9870
Electrical Equipment Mounting Base

016449870
866-0128-020: RNCC: 3 | RNVC: 2

29 May 2015

5975-01-381-0744
Electrical-Electronic Equipment Chassis

013810744
13032021: RNCC: 3 | RNVC: 2

7 Oct 1993

5975-00-829-3922
Cover Side Entrance

008293922
00-8016-056-000-100: RNCC: 3 | RNVC: 2

30 Aug 1967

5975-00-830-4134
Electrical Equipment Cabinet

008304134
9152908: RNCC: 3 | RNVC: 2

28 May 1969

5975-01-451-1451
Zer Pwb-Heater Bite

014511451
11450350-9: RNCC: 3 | RNVC: 2

5 Dec 1997

5975-01-454-4888
Electrical-Electronic Equipment Chassis

014544888
Z380CRT: RNCC: 3 | RNVC: 2

1 Apr 1998

5975-01-453-8937
Cord Tray Ducting Cover

014538937
YC-24419: RNCC: 3 | RNVC: 2

12 Mar 1998

5975-01-454-2199
Electrical Tie Down Mounting Base

014542199
9D0272-105: RNCC: 3 | RNVC: 2
CB4021V3N32: RNCC: 5 | RNVC: 2

24 Mar 1998

5975-01-455-0923
Electrical-Electronic Equipment Panel

014550923
889134-2: RNCC: 3 | RNVC: 2

22 Apr 1998

5975-01-589-4526
Electrical-Electronic Equipment Panel

015894526
618-4462-001: RNCC: 3 | RNVC: 2

27 Oct 2010

5975-01-589-4708
Electrical Equipment Mounting Base

015894708
M123008: RNCC: 3 | RNVC: 2
M123008: RNCC: 3 | RNVC: 9

27 Oct 2010

5975-01-589-8473
Electrical-Electronic Equipment Panel

015898473
7345634: RNCC: 3 | RNVC: 2

6 Nov 2010

5975-01-593-2566
Electrical Equipment Shelf

015932566
352E3312-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-501-5801
Cable Strain Relief Bushing

015015801
784919-2: RNCC: 3 | RNVC: 2

7 Oct 2002

5975-01-563-4193
Electrical Bushing

015634193
RW309-15: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-379-3278
Electrical Nonmetallic Conduit Assembly

013793278
13983-899-1: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-379-7716
Electrical Grounding Plate

013797716
11-963-5: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-00-280-9726
Flexible Metal Conduit Assembly

002809726
S3043-4700: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-351-9651
Electrical Equipment Rack

013519651
630013: RNCC: 3 | RNVC: 2
91702551: RNCC: 5 | RNVC: 2

17 Jan 1992

5975-01-353-0341
Electrical Nonmetallic Conduit Assembly

013530341
5497312-49: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-380-1908
Electrical Equipment Mounting Base

013801908
252756-1: RNCC: 3 | RNVC: 2

15 Sep 1993

5975-01-455-7605
Rigid Metal Conduit

014557605
8325-1: RNCC: 3 | RNVC: 2

14 May 1998

5975-01-584-5583
Electronic Equipment Mounting Tray

015845583
MT6-3335: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-584-9054
Card Cover

015849054
831657-0001: RNCC: 3 | RNVC: 2

11 May 2010

5975-01-616-0059
Electrical-Electronic Equipment Chassis

016160059
72B245030-102: RNCC: 3 | RNVC: 2

29 Jan 2013

5975-01-616-7446
Electronic Junction Rack

016167446
24563-431: RNCC: 3 | RNVC: 9

26 Feb 2013

5975-01-618-1119
Electrical-Electronic Equipment Panel

016181119
65707-70021-043: RNCC: 3 | RNVC: 2

12 Apr 2013

5975-01-537-8815
Electrical Equipment Rack

015378815
XTA-3000-2URK-19U: RNCC: 3 | RNVC: 2
370-6166: RNCC: 5 | RNVC: 2

1 Mar 2006

5975-01-375-2800
Electrical-Electronic Equipment Panel

013752800
68730-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-5269
Electrical Equipment Cabinet

013755269
EEC124517: RNCC: 3 | RNVC: 2

14 May 1993

5975-01-375-2798
Electrical-Electronic Equipment Panel

013752798
68728-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-3186
Connector Box Assembly

013753186
6-1-9405: RNCC: 3 | RNVC: 2

8 May 1993

5975-01-375-3187
Ground Rod Assembly

013753187
6-1-9836-143: RNCC: 3 | RNVC: 2

8 May 1993

5975-01-375-5345
Nonmetallic Raceway Assembly

013755345
BL-10999: RNCC: 3 | RNVC: 2

14 May 1993

5975-01-376-2943
Flexible Metal Conduit Assembly

013762943
226493-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-525: RNCC: 5 | RNVC: 2

29 May 1993

5975-01-375-9633
Electrical Equipment Mounting Base

013759633
6V3137: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-376-7902
Electrical Conduit Elbow

013767902
UB9AJ: RNCC: 3 | RNVC: 9

8 Jun 1993

5975-01-339-8283
Electrical-Electronic Equipment Panel

013398283
5041-7238: RNCC: 3 | RNVC: 2
5041-7238: RNCC: 3 | RNVC: 9
5041-7238: RNCC: 5 | RNVC: 9

31 May 1991

5975-01-343-9617
Electrical Equipment Cabinet

013439617
24900-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-351-9689
Cable Strain Relief Bushing

013519689
2113: RNCC: 3 | RNVC: 2

17 Jan 1992

5975-01-369-7520
Terminal Board

013697520
RC11090-50U: RNCC: 3 | RNVC: 2
9D0090-50U: RNCC: 5 | RNVC: 2

6 Jan 1993

5975-01-516-7093
Electrical-Electronic Equipment Panel

015167093
10535-4000-01: RNCC: 3 | RNVC: 2

15 Jan 2004

5975-01-516-8971
Rod Grounding Kit

015168971
8110565-00: RNCC: 3 | RNVC: 2

23 Jan 2004

5975-00-441-7551
Chassis Base

004417551
7826: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-612-7593
Electrical Equipment Drawer

016127593
74T081618-1001: RNCC: 3 | RNVC: 2

19 Oct 2012

5975-01-373-9513
Flexible Metal Conduit

013739513
6-1-9985-24: RNCC: 3 | RNVC: 2

13 Apr 1993

5975-01-374-3688
Electrical Box Connector

013743688
6-1-9985-17: RNCC: 3 | RNVC: 2

22 Apr 1993

5975-01-375-2787
Electrical-Electronic Equipment Panel

013752787
68717-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2394
Electrical Box Connector

013752394
6-1-9932-6: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-127-0102
Insulation Sleeve

011270102
4038722: RNCC: 3 | RNVC: 2

22 Feb 1982

5975-01-128-0815
Bracket Panel

011280815
201987-2: RNCC: 3 | RNVC: 2
201987-2: RNCC: 5 | RNVC: 9

11 Mar 1982

5975-01-127-9543
Electrical Components Tie Down Strap

011279543
T120R: RNCC: 3 | RNVC: 2
303452-6: RNCC: 5 | RNVC: 2
T120R W: RNCC: 5 | RNVC: 2

11 Mar 1982

5975-00-392-1939
Blank Panel

003921939
123394: RNCC: 3 | RNVC: 9
123394: RNCC: 5 | RNVC: 9
123394: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-468-7378
Electrical-Electronic Equipment Chassis

014687378
VPR-MB: RNCC: 3 | RNVC: 2

20 Oct 1999

5975-01-505-2447
Cable Shield Adapter

015052447
SEEPA-N-N-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-506-8768
Electrical-Electronic Equipment Chassis

015068768
3642575-10: RNCC: 3 | RNVC: 2

11 Apr 2003

5975-01-538-2895
Electrical-Electronic Equipment Panel

015382895
511245-1: RNCC: 3 | RNVC: 2

16 Mar 2006

5975-01-607-3911
Electronic Equipment Mounting Tray

016073911
MT4-2333-101: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-607-6046
Electrical Components Tie Down Strap

016076046
105-0210: RNCC: 3 | RNVC: 9

8 Jun 2012

5975-01-420-8448
Cable Hanger

014208448
604AS398-1: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-451-9451
Cable Marker Sleeve

014519451
013-007382-020: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-539-7907
Electrical-Electronic Equipment Chassis

015397907
14024103: RNCC: 3 | RNVC: 2
241 1EG5214024103: RNCC: C | RNVC: 1

2 May 2006

5975-01-465-7241
Electrical Wall Plate

014657241
7-511115146-3: RNCC: 3 | RNVC: 2

18 Jun 1999

5975-00-436-1820
Rigid Metal Conduit Assembly

004361820
800735-00: RNCC: 3 | RNVC: 2

24 Mar 1969

5975-01-303-6763
Electrical Components Tie Down Strap

013036763
696-40527-2: RNCC: 3 | RNVC: 2
696-40527-2-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-303-6752
Electrical Components Tie Down Strap

013036752
696-40527-5-0: RNCC: 3 | RNVC: 2
696-40527-5-0-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-303-7189
Junction Box

013037189
1213D3704: RNCC: 3 | RNVC: 2
1213D3704: RNCC: 5 | RNVC: 9

4 Jul 1989

5975-01-535-9243
Flexible Metal Conduit

015359243
227653-DL0000: RNCC: 3 | RNVC: 2

14 Dec 2005

5975-01-419-4043
Electrical-Electronic Equipment Chassis

014194043
6702-0004-01: RNCC: 3 | RNVC: 2

21 Sep 1995

5975-00-578-3959
Junction Box Cover

005783959
58C6: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-445-3163
Electrical-Electronic Equipment Chassis

014453163
G5-E17M: RNCC: 3 | RNVC: 9

29 May 1997

5975-01-539-5160
Electrical Tie Down Mounting Base

015395160
SB7000UG2NY1P: RNCC: 3 | RNVC: 2
CB4021V3N8P: RNCC: 5 | RNVC: 2
9D0272-101P: RNCC: 5 | RNVC: 2

24 Apr 2006

5975-00-436-1821
Rigid Metal Conduit Assembly

004361821
800734-00: RNCC: 3 | RNVC: 2

24 Mar 1969

5975-01-300-8386
Electrical Equipment Cabinet

013008386
19511A: RNCC: 3 | RNVC: 2
19511A: RNCC: 3 | RNVC: 9
19511A: RNCC: 5 | RNVC: 9

19 May 1989

5975-01-300-8389
Electrical Conduit Adapter

013008389
74-20774-02: RNCC: 3 | RNVC: 9

19 May 1989

5975-01-565-2996
Electrical Equipment Mounting Base

015652996
ES122255-125: RNCC: 3 | RNVC: 2

21 Jul 2008

5975-01-566-1297
Electrical-Electronic Equipment Chassis

015661297
749015-01: RNCC: 3 | RNVC: 2

20 Aug 2008

5975-01-568-1420
Chassis Base

015681420
309144-001: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-568-5207
Electrical Equipment Foot

015685207
341749: RNCC: 3 | RNVC: 2

3 Nov 2008

5975-01-568-9939
Electrical-Electronic Equipment Chassis

015689939
115-00243-00: RNCC: 3 | RNVC: 2

17 Nov 2008

5975-01-417-3351
Switch Terminal Cover

014173351
1132105-1: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-417-9220
Electrical Components Tie Down Strap

014179220
M23190/3-6: RNCC: 2 | RNVC: 1

17 Aug 1995

5975-01-418-1856
Guide Rail

014181856
9D0090-43: RNCC: 3 | RNVC: 2
9D0090-43: RNCC: 5 | RNVC: 2

22 Aug 1995

5975-01-034-1623
Electrical Components Tie Down Strap

010341623
PLT1-5I: RNCC: 3 | RNVC: 2
1003382-01: RNCC: 5 | RNVC: 9
11437794-5: RNCC: 7 | RNVC: 2

20 Jan 1977

5975-01-384-4347
Junction Box

013844347
1006416: RNCC: 3 | RNVC: 2
1006416: RNCC: 3 | RNVC: 9

15 Dec 1993

5975-01-379-2264
Insulator Pin

013792264
40320C10R65A8R1: RNCC: 3 | RNVC: 2

29 Aug 1993

5975-01-379-2417
Electrical-Electronic Equipment Panel

013792417
13031209: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-530-1914
Electrical Tie Down Mounting Base

015301914
TM2R6-3: RNCC: 3 | RNVC: 2
5D0061-3: RNCC: 5 | RNVC: 2

17 May 2005

5975-01-531-4099
Electrical-Electronic Equipment Panel

015314099
243A090-1: RNCC: 3 | RNVC: 2

7 Jul 2005

5975-01-562-1025
Electrical Equipment Rack

015621025
292302-B22: RNCC: 3 | RNVC: 2

28 Mar 2008

Load More Results