What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 161 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 161 of 176

5975-01-241-4535
Electrical-Electronic Equipment Chassis

012414535
10047024-105: RNCC: 3 | RNVC: 2

26 Sep 1986

5975-01-406-2215
Conduit Fitting Kit

014062215
58160-00: RNCC: 3 | RNVC: 2

23 Dec 1994

5975-01-386-6990
Electrical-Electronic Equipment Chassis

013866990
A405A137-98: RNCC: 3 | RNVC: 2

11 Feb 1994

5975-01-388-2752
Electrical Equipment Rack

013882752
HP E3902A: RNCC: 3 | RNVC: 2

25 Mar 1994

5975-01-390-7888
Blank Panel

013907888
687-4433-004: RNCC: 3 | RNVC: 2

26 May 1994

5975-01-558-8301
Electrical Equipment Rack

015588301
5102815-1: RNCC: 3 | RNVC: 2

26 Nov 2007

5975-01-559-4532
Electrical Equipment Rack

015594532
SLRK1004TS00-00: RNCC: 3 | RNVC: 2

18 Dec 2007

5975-01-375-2401
Flexible Metal Conduit

013752401
6-1-8771-43: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2404
Flexible Metal Conduit

013752404
6-1-8771-44: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2266
Electrical Box Connector

013752266
6-1-9985-18: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2258
Electrical Equipment Rack

013752258
HP5062-3978: RNCC: 3 | RNVC: 2
91714210: RNCC: 5 | RNVC: 2

7 May 1993

5975-01-375-2783
Electrical-Electronic Equipment Panel

013752783
68713-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-253-5937
Flexible Nonmetallic Conduit

012535937
T1620A00: RNCC: 3 | RNVC: 2

22 Apr 1987

5975-01-345-7913
Electrical Conduit Adapter

013457913
C004AC1616AA/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-7910
Electrical Conduit Adapter

013457910
151469-0004/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-8805
Electrical-Electronic Equipment Panel

013458805
PM-811L 104: RNCC: 3 | RNVC: 9
612/4/41784/000: RNCC: 5 | RNVC: 2
687/1/27216/001 ITEM 325: RNCC: 5 | RNVC: 2
687/1/27216/001/325: RNCC: 5 | RNVC: 2
612/4/41784/000: RNCC: 5 | RNVC: 9
687/1/27216/001 ITEM 325: RNCC: 5 | RNVC: 9
687/1/27216/001/325: RNCC: 5 | RNVC: 9

24 Sep 1991

5975-01-558-1929
Electrical Conduit Ferrule

015581929
RP2311-18-12-01: RNCC: 3 | RNVC: 1
302-7006849ITEM48: RNCC: 5 | RNVC: 1
RP2311-18-12-01SM: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-558-1914
Electrical Conduit Ferrule

015581914
GR2126-EM16: RNCC: 3 | RNVC: 1
302-7006849ITEM45: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-558-1925
Electrical Conduit Adapter

015581925
RP2200-EM12: RNCC: 3 | RNVC: 1
302-7006849ITEM42: RNCC: 5 | RNVC: 1
RP2200-EM12: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-374-3687
Electrical Box Connector

013743687
6-1-6200-34: RNCC: 3 | RNVC: 2

22 Apr 1993

5975-01-373-9957
Cable Marker Sleeve

013739957
TRSA1014/E/A: RNCC: 3 | RNVC: 2
99046769: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-374-5307
Blank Panel

013745307
0N475704-1: RNCC: 3 | RNVC: 2

24 Apr 1993

5975-00-101-5495
Electrical Equipment Shelf

001015495
8000384: RNCC: 3 | RNVC: 2

5 Jun 1968

5975-01-259-5216
Blade

012595216
8000-417BB: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-378-3785
Electrical Equipment Cabinet

013783785
612R631G01: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-258-6731
Junction Box

012586731
DR41A2: RNCC: 3 | RNVC: 2
DR41C1: RNCC: 5 | RNVC: 9
10-3056-9: RNCC: 7 | RNVC: 2

6 Jul 1987

5975-01-259-2298
Electrical-Electronic Equipment Chassis

012592298
0N352300: RNCC: 3 | RNVC: 2

14 Jul 1987

5975-01-258-5941
Strain Electrical Conductor Clamp

012585941
GS3417-12M: RNCC: 3 | RNVC: 2

4 Jul 1987

5975-01-343-5090
Electrical Equipment Cabinet

013435090
30508-507: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-9616
Electrical Cable Nipple

013439616
30850-501: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-555-7238
Electrical-Electronic Equipment Chassis

015557238
39J1255: RNCC: 3 | RNVC: 2

11 Sep 2007

5975-01-555-1078
Electrical Equipment Cabinet

015551078
400087-17: RNCC: 3 | RNVC: 2

29 Aug 2007

5975-01-555-9234
Electrical Cable Support

015559234
150-256-1: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-371-7882
Insulator Bracket

013717882
70500-82104-139: RNCC: 3 | RNVC: 2

23 Feb 1993

5975-01-370-7095
Electrical-Electronic Equipment Chassis

013707095
61053: RNCC: 3 | RNVC: 2

29 Jan 1993

5975-01-370-4454
Blank Panel

013704454
176C2214: RNCC: 3 | RNVC: 2

22 Jan 1993

5975-01-371-3344
Electrical-Electronic Equipment Chassis

013713344
628-5061-001: RNCC: 3 | RNVC: 2

11 Feb 1993

5975-01-419-1931
Sectiona Terminal Junction Block

014191931
9D0090-40U: RNCC: 3 | RNVC: 2
9D0090-40U: RNCC: 5 | RNVC: 2
RC11090-40U: RNCC: 5 | RNVC: 2
RC11090: RNCC: D | RNVC: 9

15 Sep 1995

5975-01-419-4929
Electrical Equipment Mounting Base

014194929
140-11137: RNCC: 3 | RNVC: 2

22 Sep 1995

5975-01-257-8534
Blank Panel

012578534
10080-1110: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-01-342-1289
Electrical Equipment Rack

013421289
SBC608: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-343-5087
Electrical Equipment Cabinet

013435087
30579-509: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-342-2246
Vertical Elbow

013422246
1224HDA490: RNCC: 3 | RNVC: 9

17 Jul 1991

5975-01-555-0547
Electrical Equipment Mounting Base

015550547
750021-13: RNCC: 3 | RNVC: 2
750021-13: RNCC: 3 | RNVC: 9

28 Aug 2007

5975-01-554-8928
Junction Box

015548928
11447673: RNCC: 3 | RNVC: 2

22 Aug 2007

5975-01-414-1711
Electrical Tie Down Mounting Base

014141711
TC-804: RNCC: 3 | RNVC: 2

1 Jun 1995

5975-01-397-5171
Rigid Metal Conduit

013975171
1310-0101-3: RNCC: 3 | RNVC: 2
1310-0101-3: RNCC: 5 | RNVC: 9

13 Oct 1994

5975-01-397-1341
Electrical Equipment Rack

013971341
CY8713FSQ131: RNCC: 3 | RNVC: 2
290-118914-01: RNCC: 3 | RNVC: 2

4 Oct 1994

5975-01-398-0197
Rigid Metal Conduit

013980197
1310-0101-28: RNCC: 3 | RNVC: 2
1310-0101-28: RNCC: 5 | RNVC: 9

22 Oct 1994

5975-00-280-6036
Electrical Equipment Rack

002806036
SCD68858: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-340-2895
Cable Marker Sleeve

013402895
506658-13: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-7880
Electrical-Electronic Equipment Panel

013407880
31835-01: RNCC: 3 | RNVC: 2

19 Jun 1991

5975-01-539-4536
Electrical Tie Down Mounting Base

015394536
SB6000UG2NY1P: RNCC: 3 | RNVC: 2
9D0271P101: RNCC: 5 | RNVC: 2
CB4020V3N6P: RNCC: 5 | RNVC: 2

21 Apr 2006

5975-01-539-8430
Tiedo Mounting Base

015398430
H0874: RNCC: 3 | RNVC: 2
CB9120-V-3: RNCC: 5 | RNVC: 2

2 May 2006

5975-01-366-3668
Electrical Equipment Rack

013663668
95000002B: RNCC: 3 | RNVC: 2

24 Oct 1992

5975-01-394-2323
Weldmen Enclosure

013942323
6122858: RNCC: 3 | RNVC: 2

4 Aug 1994

5975-01-393-2233
Chassis Base

013932233
149D3381G1: RNCC: 3 | RNVC: 2

15 Jul 1994

5975-01-393-6475
Electrical-Electronic Equipment Chassis

013936475
G160108: RNCC: 3 | RNVC: 2

25 Jul 1994

5975-01-395-5369
Electrical Cable Protector

013955369
WIN-CC-32: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-01-396-3335
Electrical-Electronic Equipment Chassis

013963335
34052418-008: RNCC: 3 | RNVC: 2
34052418-007: RNCC: 5 | RNVC: 9
34052418-007: RNCC: 5 | RNVC: 9

19 Sep 1994

5975-00-322-3712
Electrical Equipment Rack

003223712
463673-110: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-263-7342
Electrical-Electronic Equipment Panel

012637342
0015511-01: RNCC: 3 | RNVC: 9

18 Sep 1987

5975-01-339-5363
Electrical Box Connector

013395363
010916: RNCC: 3 | RNVC: 2
010916: RNCC: 3 | RNVC: 9

23 May 1991

5975-01-339-5364
Electrical Box Connector

013395364
010610: RNCC: 3 | RNVC: 2
010610: RNCC: 3 | RNVC: 9

23 May 1991

5975-01-340-2897
Cable Marker Sleeve

013402897
506658-10: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-1382
Cable Marker Sleeve

013401382
506658-37: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-536-7385
Electrical Equipment Rack

015367385
4G3138-1-1: RNCC: 3 | RNVC: 2

12 Jan 2006

5975-01-536-8546
Flexible Metal Conduit Assembly

015368546
227724-DL0000: RNCC: 3 | RNVC: 2

18 Jan 2006

5975-01-537-9123
Electrical Equipment Cabinet

015379123
083701-0100: RNCC: 3 | RNVC: 9

2 Mar 2006

5975-01-536-2335
Flexible Metal Conduit Assembly

015362335
227760-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-364-0948
Electrical Tie Down Mounting Base

013640948
MTP1S-E6-C: RNCC: 3 | RNVC: 2

11 Sep 1992

5975-01-435-3391
Cable Hanger

014353391
11464745: RNCC: 3 | RNVC: 2

21 Aug 1996

5975-01-436-9701
Junction Box

014369701
2D113657G01: RNCC: 3 | RNVC: 2

2 Oct 1996

5975-00-296-4569
Flexible Metal Conduit Assembly

002964569
10-53352: RNCC: 3 | RNVC: 2
10-53352: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-262-9227
Electrical Equipment Rack

012629227
0015550-01: RNCC: 3 | RNVC: 9

5 Sep 1987

5975-01-338-1074
Electrical-Electronic Equipment Chassis

013381074
30447-103: RNCC: 3 | RNVC: 2

26 Apr 1991

5975-01-339-2518
Cable Marker Sleeve

013392518
651036-41: RNCC: 3 | RNVC: 2

19 May 1991

5975-01-340-1381
Cable Marker Sleeve

013401381
506658-5: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-536-0398
Flexible Metal Conduit Assembly

015360398
227698-DL0000: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-01-536-2337
Flexible Metal Conduit Assembly

015362337
230729-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-2193
Electrical Equipment Rack

015362193
65000127: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-5576
Interconnecting Box

015365576
916025200: RNCC: 3 | RNVC: 2

6 Jan 2006

5975-01-362-4748
Electrical-Electronic Equipment Chassis

013624748
PHU G10565-7: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-01-362-4745
Electrical-Electronic Equipment Panel

013624745
921101050-009: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-362-8915
Electrical-Electronic Equipment Chassis

013628915
72057: RNCC: 3 | RNVC: 2

18 Aug 1992

5975-01-544-0345
Electrical Box Connector

015440345
SR-50-375: RNCC: 3 | RNVC: 9

28 Sep 2006

5975-01-544-3561
Electrical-Electronic Equipment Chassis

015443561
123845-1: RNCC: 3 | RNVC: 2
123845-1: RNCC: 5 | RNVC: 2
123845-1: RNCC: 5 | RNVC: 2

11 Oct 2006

5975-01-544-7826
Junction Box Cover

015447826
227294-F500000A: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-285-4292
Electrical Equipment Mounting Base

012854292
11461490: RNCC: 3 | RNVC: 2

14 Sep 1988

5975-01-534-0179
Electrical-Electronic Equipment Chassis

015340179
DS-C9509: RNCC: 3 | RNVC: 2
MDS 9509: RNCC: 5 | RNVC: 2

4 Oct 2005

5975-01-533-4658
Electrical Equipment Rack

015334658
9742-1000: RNCC: 3 | RNVC: 2

15 Sep 2005

5975-01-361-0940
Electrical Components Tie Down Strap

013610940
TY-H-25M-5: RNCC: 3 | RNVC: 2

8 Jul 1992

5975-01-376-8532
Cable Spacer

013768532
3516875: RNCC: 3 | RNVC: 2

9 Jun 1993

5975-01-376-8519
Junction Box

013768519
800T-6TJZ: RNCC: 3 | RNVC: 2

9 Jun 1993

5975-01-223-4691
Electrical Equipment Rack

012234691
503320: RNCC: 3 | RNVC: 2

30 Dec 1985

5975-01-542-3046
Electrical Tie Down Mounting Base

015423046
SB7000UG2NY3P: RNCC: 3 | RNVC: 2
CB4021V3N16P: RNCC: 3 | RNVC: 2
9D0272-103P: RNCC: 5 | RNVC: 2

28 Jul 2006

5975-01-390-2470
Electrical-Electronic Equipment Panel

013902470
687-4434-003: RNCC: 3 | RNVC: 2

13 May 1994

5975-01-331-0423
Electrical-Electronic Equipment Panel

013310423
G5694: RNCC: 3 | RNVC: 2

13 Dec 1990

5975-01-331-4297
Electrical Grounding Plate

013314297
0050430410: RNCC: 3 | RNVC: 2
5043-4: RNCC: 5 | RNVC: 9

20 Dec 1990

5975-01-532-3462
Electrical-Electronic Equipment Panel

015323462
3605000-0512: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-360-0688
Junction Box

013600688
3650818-1: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-01-375-2294
Cable Marker Sleeve

013752294
TRSA1014/E/2/11: RNCC: 3 | RNVC: 2
99045985: RNCC: 5 | RNVC: 2

7 May 1993

5975-01-376-4657
Electrical Conduit Adapter

013764657
E950JH: RNCC: 3 | RNVC: 9
00034481062295: RNCC: 5 | RNVC: 9

3 Jun 1993

5975-01-375-2776
Electrical-Electronic Equipment Panel

013752776
67807-007: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-425-2576
Electrical Cable Nipple

014252576
03488000: RNCC: 3 | RNVC: 2
03488000: RNCC: 5 | RNVC: 9

15 Feb 1996

5975-01-327-9774
Electrical Equipment Mounting Base

013279774
433-19026-1: RNCC: 3 | RNVC: 2

25 Oct 1990

5975-01-329-9155
Junction Box Cover

013299155
6803-3026-1: RNCC: 3 | RNVC: 9

28 Nov 1990

5975-01-530-9511
Wrap Harness

015309511
PW50F-T: RNCC: 3 | RNVC: 2

17 Jun 2005

5975-01-389-1808
Electrical Equipment Mounting Base

013891808
8905910-505: RNCC: 3 | RNVC: 2
8905910-505: RNCC: 3 | RNVC: 9

19 Apr 1994

5975-01-342-6035
Cable Marker Sleeve

013426035
651036-73: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-375-2805
Electrical-Electronic Equipment Panel

013752805
68735-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-343-5086
Electrical Equipment Cabinet

013435086
30455-507: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-470-2762
Flexible Metal Conduit Assembly

014702762
230730-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-543: RNCC: 7 | RNVC: 2

13 Dec 1999

5975-00-296-0732
Flexible Metal Conduit Assembly

002960732
2206-1309: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-539-7900
Electrical-Electronic Equipment Chassis

015397900
14024100: RNCC: 3 | RNVC: 2
241 1EG5214024100: RNCC: C | RNVC: 1

2 May 2006

5975-01-362-4738
Electrical-Electronic Equipment Panel

013624738
924000040-019: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-370-3054
Crossarm Support *

013703054
32321: RNCC: 3 | RNVC: 2

20 Jan 1993

5975-01-370-9478
Electrical Components Tie Down Strap

013709478
SST1-5M10: RNCC: 3 | RNVC: 2
SST1-5M10: RNCC: 5 | RNVC: 2

3 Feb 1993

5975-01-529-5769
Electrical Equipment Mounting Base

015295769
609-9623-001: RNCC: 3 | RNVC: 2

21 Apr 2005

5975-01-387-1300
Electrical Equipment Cabinet

013871300
13082386: RNCC: 3 | RNVC: 2
13082386: RNCC: 5 | RNVC: 9

25 Feb 1994

5975-01-341-8196
Blank Panel

013418196
J52H0678-1: RNCC: 3 | RNVC: 9

9 Jul 1991

5975-01-342-6044
Cable Marker Sleeve

013426044
651036-135: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-467-9044
Cable Marker Sleeve

014679044
13074005-3: RNCC: 3 | RNVC: 2

20 Sep 1999

5975-01-465-8026
Flexible Metal Conduit Assembly

014658026
S6162-63806-4: RNCC: 3 | RNVC: 2

22 Jun 1999

5975-00-296-1490
Electrical Conduit Ferrule-Nut Coupling

002961490
U3264-55: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-0773
Electrical Conductor Bushing

002960773
504-9472-002: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-0768
Electrical Conduit Coupling Nut

002960768
5608-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-2668
Blank Panel

002962668
A16224: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-539-5164
Junction Box Cover

015395164
227265-F500000A: RNCC: 3 | RNVC: 2

24 Apr 2006

5975-01-538-7152
Elect Condu Adapter

015387152
HF0965815: RNCC: 3 | RNVC: 2

29 Mar 2006

5975-01-339-4003
Rigid Metal Conduit Assembly

013394003
GA191-A22B2240-52NFSG: RNCC: 3 | RNVC: 9

22 May 1991

5975-01-355-6407
Electrical Box Connector

013556407
2912: RNCC: 3 | RNVC: 1
2912: RNCC: 5 | RNVC: 9

20 Mar 1992

5975-01-338-8922
Flexible Metal Conduit Assembly

013388922
90151-106: RNCC: 3 | RNVC: 2

12 May 1991

5975-01-339-2697
Pothead

013392697
D-500-0263-033: RNCC: 3 | RNVC: 2

19 May 1991

5975-01-339-3462
Electrical Equipment Rack

013393462
02-795838-2: RNCC: 3 | RNVC: 1
02-795838-2TR: RNCC: 5 | RNVC: 2

21 May 1991

5975-01-527-9514
Flexible Metal Conduit Assembly

015279514
227721-DL0000: RNCC: 3 | RNVC: 2

24 Feb 2005

5975-01-528-0738
Electrical Tie Down Mounting Base

015280738
TM3S8-M: RNCC: 3 | RNVC: 2
TM3S8-M: RNCC: 5 | RNVC: 2
PNUTM3S8-M: RNCC: 5 | RNVC: 9

2 Mar 2005

5975-01-529-3598
Electrical Tie Down Mounting Base

015293598
AM2-9: RNCC: 3 | RNVC: 2
5D0061-9: RNCC: 5 | RNVC: 2

13 Apr 2005

5975-01-528-5772
Flexible Metal Conduit Assembly

015285772
227716-DL0000: RNCC: 3 | RNVC: 2

17 Mar 2005

5975-01-385-8039
Electrical-Electronic Equipment Chassis

013858039
38906-1: RNCC: 3 | RNVC: 2
38906-1: RNCC: 5 | RNVC: 9

19 Jan 1994

5975-01-340-1387
Cable Marker Sleeve

013401387
506657-15: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2666
Electrical Components Tie Down Strap

013402666
506657-5: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2886
Cable Marker Sleeve

013402886
506658-21: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-340-2675
Electrical Components Tie Down Strap

013402675
506657-28: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-459-8649
Electrical Equipment Cabinet

014598649
C1100D-A: RNCC: 3 | RNVC: 2

16 Oct 1998

5975-01-459-6324
Electrical-Electronic Equipment Chassis

014596324
LE7404A: RNCC: 3 | RNVC: 9

8 Oct 1998

5975-01-462-8663
Electrical-Electronic Equipment Chassis

014628663
BE 1: RNCC: 3 | RNVC: 2
351-01513-000: RNCC: 5 | RNVC: 2
351-01513-000: RNCC: 5 | RNVC: 9
351-01513-000: RNCC: 5 | RNVC: 9

22 Feb 1999

5975-01-463-3831
Electrical Equipment Rack

014633831
03-05147-001: RNCC: 3 | RNVC: 2

18 Mar 1999

5975-01-464-4517
Electrical-Electronic Equipment Chassis

014644517
X6601A: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-01-461-6820
Electronic Equipment Mounting Tray

014616820
16101043-001: RNCC: 3 | RNVC: 2

23 Dec 1998

5975-01-274-5329
Electrical Cable Protector

012745329
810946-2: RNCC: 3 | RNVC: 2

10 Mar 1988

5975-01-537-0872
Electrical-Electronic Equipment Chassis

015370872
SNAP-M64: RNCC: 3 | RNVC: 2

25 Jan 2006

5975-01-537-6221
Electrical Equipment Rack

015376221
C9268R: RNCC: 3 | RNVC: 2

15 Feb 2006

5975-01-312-2136
Electrical Equipment Mounting Base

013122136
455-6085: RNCC: 3 | RNVC: 2

12 Dec 1989

5975-01-525-9880
Junction Box Assembly

015259880
1558005-101: RNCC: 3 | RNVC: 2

2 Dec 2004

5975-01-525-6944
Electrical Equipment Rack

015256944
9306250: RNCC: 3 | RNVC: 2

19 Nov 2004

5975-01-526-3681
Electrical Components Tie Down Strap

015263681
MLT6SH-LP316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-383-7158
Electrical-Electronic Equipment Chassis

013837158
1C9857G1: RNCC: 3 | RNVC: 2

1 Dec 1993

5975-01-385-0667
Electronic Junction Rack

013850667
210-296: RNCC: 3 | RNVC: 9

3 Jan 1994

5975-01-338-0783
Cable Marker Sleeve

013380783
804911: RNCC: 3 | RNVC: 2

26 Apr 1991

5975-01-339-4315
Right Hand Support

013394315
949973-104: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-339-2478
Electrical Equipment Rack

013392478
525 138-0001: RNCC: 3 | RNVC: 2

19 May 1991

5975-01-339-3831
Strain Electrical Conductor Clamp

013393831
SR4L4: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-339-4004
Rigid Metal Conduit Assembly

013394004
GA191-A24B2428-54NFS: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-339-3733
Flexible Metal Conduit Assembly

013393733
910292: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-340-1383
Cable Marker Sleeve

013401383
506658-36: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-320-9972
Electrical Equipment Mounting Base

013209972
102658-001PL: RNCC: 3 | RNVC: 9

7 Jun 1990

5975-01-454-7068
Electrical-Electronic Equipment Chassis

014547068
WS-C5000: RNCC: 3 | RNVC: 2

10 Apr 1998

5975-01-455-5208
Guide Rail

014555208
RC11090-15P: RNCC: 3 | RNVC: 2
9D0090-15P: RNCC: 3 | RNVC: 2

6 May 1998

5975-01-033-4892
Electrical Conduit Adapter

010334892
M1524: RNCC: 3 | RNVC: 9

7 Jan 1977

5975-01-272-0448
Cable Marker Sleeve

012720448
TMS1/2-46: RNCC: 3 | RNVC: 2
TMS-1/2-1/75-9: RNCC: 5 | RNVC: 2
TMS1/2-1.811: RNCC: 5 | RNVC: 9

3 Feb 1988

5975-01-535-9915
Flexible Metal Conduit Assembly

015359915
227695-DL0000: RNCC: 3 | RNVC: 2

15 Dec 2005

5975-01-534-8378
Electrical Grounding Plate

015348378
152938-1: RNCC: 3 | RNVC: 2

3 Nov 2005

5975-01-535-1124
Junction Box Assembly

015351124
204-53212-2: RNCC: 3 | RNVC: 2

15 Nov 2005

5975-01-535-3809
Stuffing Tube

015353809
630BJ003NF131A: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-535-4911
Electrical Components Tie Down Strap

015354911
GL0001: RNCC: 3 | RNVC: 2

1 Dec 2005

5975-01-303-6765
Electrical Components Tie Down Strap

013036765
696-40527-1-0: RNCC: 3 | RNVC: 2
696-40527-1-0-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-351-6097
Electrical-Electronic Equipment Panel

013516097
3661907-1: RNCC: 3 | RNVC: 2

12 Jan 1992

5975-01-521-8706
Electrical-Electronic Equipment Panel

015218706
233N7511-1: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-01-522-8120
Motor Co Enclosure

015228120
820-7425867PCMC-1: RNCC: 3 | RNVC: 1

12 Aug 2004

5975-01-522-4992
Cable Marker Sleeve

015224992
SS7074-929: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-522-9340
Electrical-Electronic Equipment Chassis

015229340
WS-C4507R-E: RNCC: 3 | RNVC: 2
WS-C4507R: RNCC: 3 | RNVC: 9
WS-C4507R: RNCC: 8 | RNVC: 2

13 Aug 2004

5975-01-525-0486
Electrical Nonmetallic Conduit Assembly

015250486
749-656-2-85.64-37.25: RNCC: 3 | RNVC: 2
5D0556-1: RNCC: 5 | RNVC: 2

26 Oct 2004

5975-01-379-3993
Electrical-Electronic Equipment Panel

013793993
47291100: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-379-6178
Electrical Cable Protector

013796178
IS-GF50LN-ME: RNCC: 3 | RNVC: 2
IS-GF50LN-ME: RNCC: 3 | RNVC: 9

7 Sep 1993

5975-01-333-7090
Electrical-Electronic Equipment Chassis

013337090
546-2909-002: RNCC: 3 | RNVC: 2

8 Feb 1991

5975-01-335-6810
Electrical-Electronic Equipment Panel

013356810
21162-51: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-336-1173
Electrical-Electronic Equipment Panel

013361173
8745450-0010: RNCC: 3 | RNVC: 2

20 Mar 1991

5975-01-337-1510
Electrical Bonding Ring

013371510
TR12AI: RNCC: 3 | RNVC: 2
TR12AI: RNCC: 5 | RNVC: 2
5365-009-12AI: RNCC: 5 | RNVC: 9
TR12AI: RNCC: 5 | RNVC: 9

10 Apr 1991

5975-01-314-5601
Electrical-Electronic Equipment Chassis

013145601
620500: RNCC: 3 | RNVC: 2

1 Feb 1990

5975-01-319-9453
Electrical Equipment Mounting Base

013199453
717744647-009: RNCC: 3 | RNVC: 2

17 May 1990

5975-00-836-9160
Electrical Box Connector

008369160
302: RNCC: 3 | RNVC: 2
27-50: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-529-3376
Stuffing Tube

015293376
630B007NF032D: RNCC: 3 | RNVC: 2

13 Apr 2005

5975-01-531-8232
Cable-Hatch Heater

015318232
LA-RR503-31: RNCC: 3 | RNVC: 2

21 Jul 2005

5975-01-532-0405
Electrical-Electronic Equipment Chassis

015320405
WS-C4510R: RNCC: 3 | RNVC: 2

26 Jul 2005

5975-01-530-7726
Blank Panel

015307726
61030048-000: RNCC: 3 | RNVC: 2
61030048: RNCC: 7 | RNVC: 2

10 Jun 2005

5975-01-519-2832
Electrical Components Tie Down Strap

015192832
PLT-2S-C-00: RNCC: 3 | RNVC: 2

13 Apr 2004

5975-01-375-2405
Flexible Metal Conduit

013752405
6-1-9932-7: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2398
Flexible Metal Conduit

013752398
6-1-8771-17: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2786
Electrical-Electronic Equipment Panel

013752786
68716-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-5268
Electrical Equipment Cabinet

013755268
EEC124193: RNCC: 3 | RNVC: 2

14 May 1993

5975-01-375-2791
Electrical-Electronic Equipment Panel

013752791
68721-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-376-0191
Electrical Equipment Cabinet

013760191
1979579-1: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-329-9319
Electrical-Electronic Equipment Panel

013299319
SYS68K/ISIO-1FP: RNCC: 3 | RNVC: 2

28 Nov 1990

5975-01-331-0336
Junction Box

013310336
338003-D5-23: RNCC: 3 | RNVC: 9

13 Dec 1990

5975-01-331-0598
Interconnecting Box

013310598
16E2504-847: RNCC: 3 | RNVC: 2

13 Dec 1990

5975-01-331-2236
Electrical-Electronic Equipment Panel

013312236
CCA-03072-05: RNCC: 3 | RNVC: 2

14 Dec 1990

5975-01-332-0820
Stuffing Tube

013320820
501-6603017PC110: RNCC: 3 | RNVC: 1
501-6603017PC110: RNCC: 5 | RNVC: 1
M24235/13-002: RNCC: 5 | RNVC: 1

3 Jan 1991

5975-01-333-4077
Electrical Conduit Adapter

013334077
710-S017NF12D: RNCC: 3 | RNVC: 2

3 Feb 1991

5975-01-481-9727
Blank Panel

014819727
1601239-101: RNCC: 3 | RNVC: 2

1 Feb 2001

5975-01-479-4813
Electrical Equipment Cabinet

014794813
121237-2: RNCC: 3 | RNVC: 2

23 Oct 2000

5975-01-661-3755
Sea Band End Cap

016613755
0705 020: RNCC: 3 | RNVC: 2

1 Mar 2017

5975-01-665-6524
Nonmetallic Raceway

016656524
C59: RNCC: 3 | RNVC: 2

8 Aug 2017

5975-01-251-1544
Electrical-Electronic Equipment Panel

012511544
844473-2: RNCC: 3 | RNVC: 2

13 Mar 1987

5975-01-525-5386
Electrical Equipment Rack

015255386
16E3202-301: RNCC: 3 | RNVC: 2

15 Nov 2004

5975-01-526-0135
Flexible Nonmetallic Conduit

015260135
75A355401-2001: RNCC: 3 | RNVC: 2

3 Dec 2004

5975-01-525-5399
Electrical Equipment Cabinet

015255399
DS19372J: RNCC: 3 | RNVC: 2

15 Nov 2004

5975-01-524-9979
Flexible Nonmetallic Conduit

015249979
343912: RNCC: 3 | RNVC: 2
343912: RNCC: 5 | RNVC: 9

25 Oct 2004

5975-01-527-0238
Electrical-Electronic Equipment Chassis

015270238
S20A159: RNCC: 3 | RNVC: 9
S20A159: RNCC: 5 | RNVC: 2

14 Jan 2005

5975-01-528-0138
Flexible Metal Conduit Assembly

015280138
227723-DL0000: RNCC: 3 | RNVC: 2

28 Feb 2005

5975-01-527-9364
Cable Marker Sleeve

015279364
RPS-1-400/2.0-9: RNCC: 3 | RNVC: 2

24 Feb 2005

5975-01-527-9362
Cable Marker Sleeve

015279362
RPS-6-250/2.0-9: RNCC: 3 | RNVC: 2

24 Feb 2005

5975-01-528-1298
Flexible Metal Conduit Assembly

015281298
227718-DL0000: RNCC: 3 | RNVC: 2

3 Mar 2005

5975-01-395-6525
Electrical-Electronic Equipment Chassis

013956525
647-2628-001: RNCC: 3 | RNVC: 2

1 Sep 1994

5975-01-395-9057
Electrical Conduit Adapter

013959057
5333007-1: RNCC: 3 | RNVC: 2

8 Sep 1994

5975-01-395-1226
Blank Panel

013951226
34077576-001: RNCC: 3 | RNVC: 2

23 Aug 1994

5975-01-397-6756
Rigid Metal Conduit

013976756
1310-0101-11: RNCC: 3 | RNVC: 2
1310-0101-11: RNCC: 5 | RNVC: 9

18 Oct 1994

5975-01-396-5602
Electrical Equipment Rack

013965602
820RHW02011: RNCC: 3 | RNVC: 2

21 Sep 1994

5975-01-398-0194
Rigid Metal Conduit

013980194
1310-0101-26: RNCC: 3 | RNVC: 2
1310-0101-26: RNCC: 5 | RNVC: 9

22 Oct 1994

5975-01-397-1340
Electrical Equipment Rack

013971340
MT6912FSQ131: RNCC: 3 | RNVC: 2
290-118911-01: RNCC: 3 | RNVC: 2

4 Oct 1994

5975-01-398-2898
Fanning Strip

013982898
2422365-2: RNCC: 3 | RNVC: 2
2422365-0002: RNCC: 5 | RNVC: 2
2422365-0002: RNCC: 5 | RNVC: 9

29 Oct 1994

5975-01-397-1342
Electrical Equipment Rack

013971342
CY8713AFSQ131: RNCC: 3 | RNVC: 2
290-118915-01: RNCC: 3 | RNVC: 2

4 Oct 1994

5975-01-516-3773
Electrical-Electronic Equipment Chassis

015163773
77427000-019: RNCC: 3 | RNVC: 2
5975PL0932142: RNCC: 6 | RNVC: 9

6 Jan 2004

5975-01-516-3116
Stuffing Tube

015163116
AII-MTS-01-214APPENDIXBITEM22: RNCC: 3 | RNVC: 1
M19622/5-004: RNCC: 5 | RNVC: 1

31 Dec 2003

5975-01-516-8977
Electrical-Electronic Equipment Chassis

015168977
8110569-00: RNCC: 3 | RNVC: 2

23 Jan 2004

5975-01-329-3972
Transmission Line Grounding Set

013293972
C600-0759: RNCC: 3 | RNVC: 9

16 Nov 1990

5975-01-329-5281
Compensating Keeper

013295281
H2142-1: RNCC: 3 | RNVC: 2

19 Nov 1990

5975-01-328-5948
Electrical Conduit Nipple

013285948
3/4 X 1-3/8: RNCC: 3 | RNVC: 9

6 Nov 1990

5975-01-472-3274
Electrical-Electronic Equipment Panel

014723274
K633720100: RNCC: 3 | RNVC: 9

28 Feb 2000

5975-01-473-0451
Junction Box Cover

014730451
VF-001B: RNCC: 3 | RNVC: 2
10226: RNCC: 5 | RNVC: 2

24 Mar 2000

5975-01-476-4766
Electrical Nonmetallic Conduit Assembly

014764766
70107882-59: RNCC: 3 | RNVC: 2
38597ASSY70107882-59: RNCC: 5 | RNVC: 2

13 Jul 2000

5975-01-476-5782
Electrical Equipment Cabinet

014765782
CSD16126: RNCC: 3 | RNVC: 2

17 Jul 2000

5975-01-656-9772
Conduit Outlet Cover

016569772
SPXDCWP: RNCC: 3 | RNVC: 2

26 Jul 2016

5975-01-657-9269
Electrical Equipment Rack

016579269
42-D1-1018: RNCC: 3 | RNVC: 2

6 Sep 2016

5975-01-522-9949
Electrical Equipment Rack

015229949
59P6727: RNCC: 3 | RNVC: 2

17 Aug 2004

5975-01-522-6981
Electrical-Electronic Equipment Chassis

015226981
DS-SL13R-BB: RNCC: 3 | RNVC: 2

9 Aug 2004

5975-01-523-6110
Blank Panel

015236110
253214-B26: RNCC: 3 | RNVC: 2

9 Sep 2004

5975-01-394-2772
Blank Panel

013942772
8030637-3: RNCC: 3 | RNVC: 2
8030637-3: RNCC: 3 | RNVC: 9

6 Aug 1994

5975-01-394-0801
Rigid Metal Conduit

013940801
65-45888-70: RNCC: 3 | RNVC: 2

2 Aug 1994

5975-01-394-8985
Electrical Components Tie Down Strap

013948985
TY23Y: RNCC: 3 | RNVC: 2

17 Aug 1994

5975-01-512-8181
Stuffing Tube

015128181
17-10411: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-01-512-7065
Electrical Equipment Cabinet

015127065
33-105411-01: RNCC: 3 | RNVC: 2
33-105411-01: RNCC: 5 | RNVC: 9

8 Sep 2003

5975-01-514-3165
Cable Spacer

015143165
3233416: RNCC: 3 | RNVC: 2

22 Oct 2003

5975-01-513-4699
Electrical Equipment Rack

015134699
A4901A: RNCC: 3 | RNVC: 2

25 Sep 2003

5975-01-514-7798
Flexible Nonmetallic Conduit

015147798
749-656-3-117.75: RNCC: 3 | RNVC: 2
5D0555-2: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-303-6759
Electrical Components Tie Down Strap

013036759
696-40527-3-0: RNCC: 3 | RNVC: 2
696-40527-3-0-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-326-6206
Electrical Cable Protector

013266206
3491240: RNCC: 3 | RNVC: 2

27 Sep 1990

5975-01-470-2760
Flexible Metal Conduit Assembly

014702760
226483-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-509: RNCC: 7 | RNVC: 2

13 Dec 1999

5975-01-649-9594
Cable Hanger

016499594
CLAMP-114: RNCC: 3 | RNVC: 2

17 Nov 2015

5975-01-648-7384
Electrical Equipment Shelf

016487384
284A7700-14: RNCC: 3 | RNVC: 2

5 Oct 2015

5975-01-648-7680
Electronic Equipment Mounting Tray

016487680
284A7700-3: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-650-9543
Electrical-Electronic Equipment Panel

016509543
0410-113-150-501: RNCC: 3 | RNVC: 2

23 Dec 2015

5975-01-648-7635
Electrical Equipment Rack

016487635
24-191-085: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-521-1924
Electronic Equipment Mounting Tray

015211924
404-50-S-1/DPXB-0: RNCC: 3 | RNVC: 2

14 Jun 2004

5975-01-521-5818
Electrical Equipment Cabinet

015215818
127665-1: RNCC: 3 | RNVC: 2

25 Jun 2004

5975-01-522-4993
Cable Marker Sleeve

015224993
SS7074-1049: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-392-4826
Electrical Equipment Rack

013924826
9500002B: RNCC: 3 | RNVC: 2
91743083: RNCC: 5 | RNVC: 2

29 Jun 1994

5975-01-280-1081
Electrical Equipment Rack

012801081
622-5297-001: RNCC: 3 | RNVC: 2
MT-5205/ARC-512: RNCC: 5 | RNVC: 2

1 Jun 1988

5975-01-279-0484
Flexible Metal Conduit Assembly

012790484
SE21F12F1204-15-12T: RNCC: 3 | RNVC: 2
710088-1: RNCC: 3 | RNVC: 2
710088: RNCC: 7 | RNVC: 2

12 May 1988

5975-01-324-2773
Stand-Off Bushing

013242773
130-11-AL-6-32P: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-449-7191
Electrical Equipment Leg

014497191
34497: RNCC: 3 | RNVC: 2

10 Oct 1997

5975-01-451-9448
Cable Marker Sleeve

014519448
013-007382-024: RNCC: 3 | RNVC: 2

9 Jan 1998

5975-01-452-0406
Electrical-Electronic Equipment Panel

014520406
151-006304-101: RNCC: 3 | RNVC: 2

13 Jan 1998

5975-01-451-9935
Electrical Equipment Rack

014519935
RF-5081BNT-125: RNCC: 3 | RNVC: 2

12 Jan 1998

5975-01-646-2982
Electrical Conduit Coupling

016462982
M24758-23D: RNCC: 3 | RNVC: 2

17 Jul 2015

5975-01-519-4571
Blank Panel

015194571
02-2785087-1: RNCC: 3 | RNVC: 2

20 Apr 2004

5975-01-520-6609
Electrical Box Connector

015206609
HRB36: RNCC: 3 | RNVC: 2

20 May 2004

5975-01-520-7587
Electrical-Electronic Equipment Panel

015207587
47761-2031-1: RNCC: 3 | RNVC: 2

25 May 2004

5975-01-389-3196
Electrical Cable Protector

013893196
DAA3523D069-001: RNCC: 3 | RNVC: 2

22 Apr 1994

5975-01-629-8600
Electrical Equipment Cabinet

016298600
S8512W: RNCC: 3 | RNVC: 2

17 Jul 2014

5975-01-232-0384
Blank Panel

012320384
10011304-001: RNCC: 3 | RNVC: 2

16 Dec 2020

5975-01-446-5009
Electrical Equipment Rack

014465009
170-035-010: RNCC: 3 | RNVC: 2

7 Jul 1997

5975-00-229-8699
Electrical Grounding Plate

002298699
0N047111: RNCC: 3 | RNVC: 2

5 Mar 1971

5975-01-642-1676
Junction Box

016421676
VC1: RNCC: 3 | RNVC: 2

17 Feb 2015

5975-01-518-3202
Feed Elbow Mount

015183202
17P2E2030-1: RNCC: 3 | RNVC: 2

8 Mar 2004

5975-01-518-1539
Blank Panel

015181539
7103928-9: RNCC: 3 | RNVC: 2

3 Mar 2004

5975-01-518-9932
Electrical-Electronic Equipment Panel

015189932
233T3230-1: RNCC: 3 | RNVC: 2

31 Mar 2004

5975-01-518-5529
Electrical-Electronic Equipment Panel

015185529
285T0554-5: RNCC: 3 | RNVC: 2

16 Mar 2004

5975-01-389-1076
Electrical Equipment Rack

013891076
JO: RNCC: 3 | RNVC: 2

16 Apr 1994

5975-01-389-7245
Terminal Board

013897245
RC11090-10: RNCC: 3 | RNVC: 2
9D0090-10: RNCC: 5 | RNVC: 2
RC11090: RNCC: D | RNVC: 9

30 Apr 1994

5975-01-628-3386
Electrical-Electronic Equipment Panel

016283386
009889-1: RNCC: 3 | RNVC: 2

20 May 2014

5975-01-628-8503
Electrical-Electronic Equipment Panel

016288503
EXP-3418: RNCC: 3 | RNVC: 2

11 Jun 2014

5975-01-629-8022
Interconnecting Box

016298022
A66B3-6: RNCC: 3 | RNVC: 2
A66B3-6: RNCC: 5 | RNVC: 2

15 Jul 2014

5975-01-387-8753
Radio Frequency Cable Splicing Kit

013878753
80-6100-7255-7: RNCC: 3 | RNVC: 9
7100135223: RNCC: C | RNVC: 1

14 Mar 1994

5975-01-627-9021
Electrical Equipment Rack

016279021
AR3350: RNCC: 3 | RNVC: 2
AR3350: RNCC: 5 | RNVC: 2
AR3350: RNCC: 5 | RNVC: 2
1AAN024971: RNCC: 5 | RNVC: 2

1 May 2014

5975-01-628-1524
Electrical-Electronic Equipment Chassis

016281524
EPP: RNCC: 3 | RNVC: 2

12 May 2014

5975-01-233-4043
Electrical Cable Assembly Protector

012334043
4205560: RNCC: 3 | RNVC: 2
4205560: RNCC: 8 | RNVC: 1

30 May 1986

5975-01-231-6831
Tube

012316831
G1343-A-4-B: RNCC: 3 | RNVC: 9

2 May 1986

5975-01-660-1663
Electrical-Electronic Equipment Chassis

016601663
WS-C4510RE-S7+96V+: RNCC: 3 | RNVC: 2

9 Jan 2017

5975-01-660-7942
Electronic Junction Rack

016607942
PVDM3-16U128: RNCC: 3 | RNVC: 2

3 Feb 2017

5975-01-659-9093
Interconnecting Box

016599093
21469055: RNCC: 3 | RNVC: 2

21 Dec 2016

5975-01-440-9989
Cabinet Assembly

014409989
7168403-00: RNCC: 3 | RNVC: 2

30 Jan 1997

5975-01-633-1607
Electrical-Electronic Equipment Chassis

016331607
CB10102-001: RNCC: 3 | RNVC: 2
40082113: RNCC: 5 | RNVC: 2

12 Nov 2014

5975-01-633-3924
Junction Box

016333924
ACN LE-T40-8181: RNCC: 3 | RNVC: 2
7325175-0003: RNCC: 5 | RNVC: 2

20 Nov 2014

5975-01-514-6783
Spec Retainer Cable

015146783
11455218: RNCC: 3 | RNVC: 2

31 Oct 2003

5975-01-515-4340
Electrical Equipment Cabinet

015154340
005787: RNCC: 3 | RNVC: 2

25 Nov 2003

5975-01-516-2454
Interconnecting Box

015162454
8-61106-505: RNCC: 3 | RNVC: 9
8-61106-505: RNCC: C | RNVC: 1

24 Dec 2003

5975-01-514-7797
Flexible Nonmetallic Conduit

015147797
749-656-3-122.45: RNCC: 3 | RNVC: 2
5D0555-1: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-515-1536
Electrical Equipment Rack

015151536
004295: RNCC: 3 | RNVC: 2

17 Nov 2003

5975-01-385-2241
Electrical Cable Nipple

013852241
222S163-25S: RNCC: 3 | RNVC: 2

6 Jan 1994

5975-01-386-1202
Electrical Equipment Mounting Base

013861202
E6676-2: RNCC: 3 | RNVC: 9

27 Jan 1994

5975-01-386-8563
Junction Box

013868563
86156: RNCC: 3 | RNVC: 9

17 Feb 1994

5975-01-624-2914
Electrical Equipment Rack

016242914
34411A-1CM: RNCC: 3 | RNVC: 2
34411A-1CM: RNCC: 5 | RNVC: 2
34411A-1CM: RNCC: 5 | RNVC: 9

20 Dec 2013

5975-01-624-9796
Electrical Components Tie Down Strap

016249796
BT2S-M39: RNCC: 3 | RNVC: 2

21 Jan 2014

5975-01-625-8940
Prom Flash

016258940
216C9881VER2.0.1.07: RNCC: 3 | RNVC: 1

19 Feb 2014

5975-01-625-9095
Cable Marker Sleeve

016259095
3233980: RNCC: 3 | RNVC: 2

20 Feb 2014

5975-01-625-9420
Electrical-Electronic Equipment Chassis

016259420
IPC-6608BP-00E: RNCC: 3 | RNVC: 2

21 Feb 2014

5975-01-627-3093
Junction Box

016273093
60523: RNCC: 3 | RNVC: 2

9 Apr 2014

5975-01-659-3778
Electrical Equipment Rack

016593778
6616-6570-0500: RNCC: 3 | RNVC: 2

22 Nov 2016

5975-01-658-7409
Interior Cable Rack

016587409
000 911: RNCC: 3 | RNVC: 2

14 Oct 2016

5975-01-660-1655
Electrical-Electronic Equipment Chassis

016601655
N6004X-M20UP=: RNCC: 3 | RNVC: 2

9 Jan 2017

5975-00-223-6613
Cable Marker Sleeve

002236613
10159118-2: RNCC: 3 | RNVC: 2

24 Dec 1971

5975-01-630-3534
Strain Relief

016303534
B2000216: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-384-5990
Electrical-Electronic Equipment Panel

013845990
528030: RNCC: 3 | RNVC: 2

18 Dec 1993

5975-01-624-8998
Cable Terminal Chamber

016248998
232A1511-1: RNCC: 3 | RNVC: 2

17 Jan 2014

5975-01-624-5173
Electrical Box Entry Flange

016245173
6715197: RNCC: 3 | RNVC: 2

7 Jan 2014

5975-01-624-9829
Electrical-Electronic Equipment Chassis

016249829
7381508-00: RNCC: 3 | RNVC: 2

21 Jan 2014

5975-01-624-7653
Electrical-Electronic Equipment Chassis

016247653
32V05OP448Y3VG41: RNCC: 3 | RNVC: 2

14 Jan 2014

5975-01-658-5292
Electrical Nonmetallic Conduit Assembly

016585292
172A1376-053: RNCC: 1 | RNVC: 2
252563-0053: RNCC: 3 | RNVC: 2
23A02976-053: RNCC: 3 | RNVC: 2
172A1376: RNCC: D | RNVC: 9

30 Sep 2016

5975-01-658-5991
Rigid Nonmetallic Conduit

016585991
S109-1664: RNCC: 3 | RNVC: 2

5 Oct 2016

5975-01-627-4751
Junction Box

016274751
PB-400-T-5: RNCC: 3 | RNVC: 2

15 Apr 2014

5975-01-628-1135
Cable Radius Drop

016281135
HLCD12: RNCC: 3 | RNVC: 2

9 May 2014

5975-01-627-8504
Raceway Cover

016278504
T45CCIW-X: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-629-6110
Electrical Components Tie Down Strap

016296110
112-12060: RNCC: 3 | RNVC: 2
T120R0K2: RNCC: 5 | RNVC: 2

9 Jul 2014

5975-01-628-6889
Electrical Components Tie Down Strap

016286889
PLT6H-C: RNCC: 3 | RNVC: 2
MS3367-9-9: RNCC: 5 | RNVC: 2

5 Jun 2014

5975-01-512-7641
Scr Cable Tie Mount

015127641
P02732: RNCC: 3 | RNVC: 2

9 Sep 2003

5975-01-513-0544
Electrical Components Tie Down Strap

015130544
PLT3H-L: RNCC: 3 | RNVC: 2

16 Sep 2003

5975-01-383-4766
Electrical-Electronic Equipment Chassis

013834766
ODS 296: RNCC: 3 | RNVC: 9
ODS 296-CHASSIS: RNCC: 5 | RNVC: 9

24 Nov 1993

5975-01-623-3657
Electrical-Electronic Equipment Chassis

016233657
1016803-1: RNCC: 3 | RNVC: 2

8 Nov 2013

5975-01-472-4955
Electrical-Electronic Equipment Panel

014724955
3351980-89: RNCC: 3 | RNVC: 2

6 Mar 2000

5975-01-476-4777
Electrical Nonmetallic Conduit Assembly

014764777
70107882-9: RNCC: 3 | RNVC: 2
38597ASSY70107882-9: RNCC: 5 | RNVC: 2

13 Jul 2000

5975-01-482-4574
Electrical Conduit Wye

014824574
710-077NFA20B16C16D16B: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-01-376-4658
Electrical Conduit Elbow

013764658
UB9AL: RNCC: 3 | RNVC: 9
00034481063285: RNCC: 5 | RNVC: 9

3 Jun 1993

5975-01-657-2380
Electrical-Electronic Equipment Panel

016572380
280296-02: RNCC: 3 | RNVC: 2

4 Aug 2016

5975-01-626-3727
Electrical-Electronic Equipment Panel

016263727
734-65113-1: RNCC: 3 | RNVC: 2
734-65113: RNCC: D | RNVC: 9

7 Mar 2014

5975-01-511-4075
Electrical Equipment Rack

015114075
590-1003-F01-02: RNCC: 3 | RNVC: 2
590-1003-F01-02: RNCC: 3 | RNVC: 9

7 Aug 2003

5975-01-396-5588
Electrical Fitting Mounting Base

013965588
501230: RNCC: 3 | RNVC: 2

21 Sep 1994

5975-01-391-2572
Electrical-Electronic Equipment Chassis

013912572
8905923-305: RNCC: 3 | RNVC: 2
8905923-305: RNCC: 3 | RNVC: 9

8 Jun 1994

5975-01-390-7884
Electrical-Electronic Equipment Chassis

013907884
8905836-301: RNCC: 3 | RNVC: 2
8905836-301: RNCC: 3 | RNVC: 9

26 May 1994

5975-01-655-2549
Electrical Equipment Rack

016552549
1002200-01: RNCC: 3 | RNVC: 2
1002200-01: RNCC: 3 | RNVC: 9

23 May 2016

5975-00-845-6223
Electrical Equipment Cabinet

008456223
C1793: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-845-6224
Electrical Equipment Cabinet

008456224
C1795: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-624-2954
Electrical-Electronic Equipment Panel

016242954
K10052749-3: RNCC: 3 | RNVC: 2

21 Dec 2013

5975-01-621-8520
Electrical-Electronic Equipment Chassis

016218520
104759-02: RNCC: 3 | RNVC: 2

19 Sep 2013

5975-01-624-4946
Electrical Conduit End Seal Disk

016244946
3311 302 004: RNCC: 3 | RNVC: 2

6 Jan 2014

5975-01-620-6696
Electrical Equipment Cabinet

016206696
7420700-42: RNCC: 3 | RNVC: 2

5 Aug 2013

5975-01-621-1524
Electrical-Electronic Equipment Chassis

016211524
ACP-2320MB0-00XBE: RNCC: 3 | RNVC: 2

26 Aug 2013

5975-01-621-1417
Electrical-Electronic Equipment Chassis

016211417
JC177B: RNCC: 3 | RNVC: 2

26 Aug 2013

5975-01-621-6952
Electrical Equipment Cabinet

016216952
PHR-100NDAS: RNCC: 3 | RNVC: 2

16 Sep 2013

5975-01-478-0829
Interconnecting Box

014780829
C99A50702-1: RNCC: 3 | RNVC: 9
C99A50702-1: RNCC: C | RNVC: 1

29 Aug 2000

5975-01-412-5075
Electrical Equipment Rack

014125075
A2084-60011: RNCC: 3 | RNVC: 2

20 Apr 1995

5975-01-413-7077
Strain Electrical Conductor Clamp

014137077
9121D1700: RNCC: 3 | RNVC: 9

19 May 1995

5975-01-413-7078
Electrical Equipment Mounting Base

014137078
01-P35868M001: RNCC: 3 | RNVC: 9
01-P35868M001: RNCC: 5 | RNVC: 9

19 May 1995

5975-01-652-2660
Electrical-Electronic Equipment Panel

016522660
CB19459-001: RNCC: 3 | RNVC: 2

16 Feb 2016

5975-01-654-1492
Conduit Outlet Cover

016541492
CFPAGS2SAWY: RNCC: 3 | RNVC: 2

19 Apr 2016

5975-01-655-2262
Electrical-Electronic Equipment Panel

016552262
25-8NF2101-11: RNCC: 3 | RNVC: 2
25-8NF2101-11: RNCC: 3 | RNVC: 9

23 May 2016

5975-01-655-0251
Cable Terminal Chamber

016550251
GWS-250-24: RNCC: 3 | RNVC: 2

17 May 2016

5975-01-655-6272
Electrical-Electronic Equipment Chassis

016556272
84-01033: RNCC: 3 | RNVC: 2

3 Jun 2016

5975-01-618-6954
Electrical Components Tie Down Strap

016186954
155-30602: RNCC: 3 | RNVC: 2

2 May 2013

5975-01-618-3988
Junction Box

016183988
1678-4: RNCC: 3 | RNVC: 2
1678-4-V2: RNCC: 3 | RNVC: 2

23 Apr 2013

5975-01-379-7738
Electrical Equipment Rack

013797738
011-00014-00: RNCC: 3 | RNVC: 2

8 Sep 1993

5975-01-619-2445
Electrical-Electronic Equipment Chassis

016192445
791-8591-002: RNCC: 3 | RNVC: 2

22 May 2013

5975-01-619-3189
Cable Marker Sleeve

016193189
HT-SCE-1K-3/8-2.0-0: RNCC: 3 | RNVC: 2

24 May 2013

5975-01-618-4519
Stuffing Tube

016184519
SB/34861: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-468-9253
Flexible Metal Conduit Assembly

014689253
254754: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-471-0528
Electrical-Electronic Equipment Chassis

014710528
063764: RNCC: 3 | RNVC: 2

20 Jan 2000

5975-01-651-8632
Electrical Conduit Wye

016518632
K-2922: RNCC: 3 | RNVC: 2

2 Feb 2016

5975-01-617-5279
Electrical Equipment Mounting Base

016175279
11071-0900-02: RNCC: 3 | RNVC: 2

26 Mar 2013

5975-01-378-9818
Blank Panel

013789818
634-3314-001: RNCC: 3 | RNVC: 2

26 Aug 1993

5975-01-688-0368
Raceway Cover

016880368
39920-40207-10: RNCC: 3 | RNVC: 2

30 Apr 2020

5975-01-687-3217
Junction Box

016873217
844E2424-11: RNCC: 3 | RNVC: 2

27 Mar 2020

5975-01-690-7284
Electrical Components Tie Down Strap

016907284
150-00700: RNCC: 3 | RNVC: 2
150-00700: RNCC: 5 | RNVC: 2
BM050578: RNCC: 5 | RNVC: 2

28 Aug 2020

5975-01-689-6677
Ground Rod

016896677
GTP-1097S-1: RNCC: 3 | RNVC: 2

2 Jul 2020

5975-01-690-4626
Electrical-Electronic Equipment Chassis

016904626
LHGC-RACK: RNCC: 3 | RNVC: 2
92139861: RNCC: 5 | RNVC: 2

13 Aug 2020

5975-01-684-8523
Flexible Nonmetallic Conduit

016848523
LCN-1000-300: RNCC: 3 | RNVC: 2
4017613: RNCC: 5 | RNVC: 2

19 Nov 2019

5975-01-618-7324
Junction Box

016187324
JB6004: RNCC: 3 | RNVC: 2

3 May 2013

5975-01-648-8629
Plate Assy Throttle

016488629
25-7CX477A: RNCC: 3 | RNVC: 2
25-7CX477A: RNCC: 3 | RNVC: 9

9 Oct 2015

5975-01-648-7367
Electrical Equipment Shelf

016487367
284A3701-16: RNCC: 3 | RNVC: 2

5 Oct 2015

5975-01-614-8875
Electrical Equipment Rack

016148875
701M6620: RNCC: 3 | RNVC: 2

18 Dec 2012

5975-01-616-1093
Electrical Conduit Adapter

016161093
62752: RNCC: 3 | RNVC: 2
62752: RNCC: 5 | RNVC: 2
SMU-00000035: RNCC: 5 | RNVC: 2
62752: RNCC: 5 | RNVC: 9

1 Feb 2013

5975-01-614-6437
Electrical Standardized Components Case

016146437
572093G1: RNCC: 3 | RNVC: 2

11 Dec 2012

5975-01-378-6355
Electrical-Electronic Equipment Panel

013786355
1576AS282-1: RNCC: 3 | RNVC: 2

21 Aug 1993

5975-01-378-7355
Electrical Conduit Coupling Nut Clamp

013787355
13470-899-403: RNCC: 3 | RNVC: 2

21 Aug 1993

5975-01-378-8796
Electrical-Electronic Equipment Panel

013788796
1214D2531: RNCC: 3 | RNVC: 2
1214D2531: RNCC: 5 | RNVC: 9

23 Aug 1993

5975-01-684-4594
Electrical Equipment Mounting Base

016844594
UT-2001: RNCC: 3 | RNVC: 2

4 Nov 2019

5975-01-464-4266
Waveguide Assy

014644266
737628-301: RNCC: 3 | RNVC: 9
737628-301: RNCC: C | RNVC: 1

29 Apr 1999

5975-01-645-7952
Blank Panel

016457952
25R5559: RNCC: 3 | RNVC: 2

29 Jun 2015

5975-01-646-8000
Electrical Equipment Rack

016468000
05.010.014.1: RNCC: 3 | RNVC: 2

30 Jul 2015

5975-01-647-4861
Electrical-Electronic Equipment Chassis

016474861
263K901G01: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-647-8345
Electrical Equipment Mounting Base

016478345
24-314-026: RNCC: 3 | RNVC: 2

3 Sep 2015

5975-01-301-0927
Panel

013010927
70550-01166-103: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-303-6700
Electrical-Electronic Equipment Panel

013036700
29128: RNCC: 3 | RNVC: 9

4 Jul 1989

5975-01-376-9352
Electrical-Electronic Equipment Chassis

013769352
681R268G01: RNCC: 3 | RNVC: 2

9 Jun 1993

5975-01-376-7927
Junction Box

013767927
E987N: RNCC: 3 | RNVC: 9
00034881066831: RNCC: 5 | RNVC: 9
00034481066835: RNCC: 5 | RNVC: 9

8 Jun 1993

5975-01-675-4354
Electrical Equipment Mounting Base

016754354
503-9501: RNCC: 3 | RNVC: 2

11 Sep 2018

5975-01-554-8924
Electrical Components Tie Down Strap

015548924
11441068-003: RNCC: 3 | RNVC: 2

22 Aug 2007

5975-01-616-2766
Electrical-Electronic Equipment Chassis

016162766
AJ866A: RNCC: 3 | RNVC: 2

7 Feb 2013

5975-01-643-0767
Flexible Nonmetallic Conduit

016430767
EZ-400NSS: RNCC: 3 | RNVC: 2

18 Mar 2015

5975-00-189-4687
Cable Marker Sleeve

001894687
0N057432-12: RNCC: 3 | RNVC: 2

1 Mar 1971

5975-01-375-2790
Electrical-Electronic Equipment Panel

013752790
68720-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-673-0167
Electrical Conduit Adapter

016730167
36-007: RNCC: 3 | RNVC: 2

29 May 2018

5975-01-553-8698
Electronic Equipment Mounting Tray

015538698
96195-1: RNCC: 3 | RNVC: 2

26 Jul 2007

5975-01-457-9491
Electrical Equipment Rack

014579491
9521-1000: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-455-7324
Rigid Metal Conduit

014557324
8329-1: RNCC: 3 | RNVC: 2

13 May 1998

5975-01-456-8087
Electrical Equipment Mounting Base

014568087
GLN7341A: RNCC: 3 | RNVC: 2
GLN7341A: RNCC: 3 | RNVC: 9

26 Jun 1998

5975-01-458-8273
Flexible Metal Conduit Assembly

014588273
17B2E2000-513: RNCC: 3 | RNVC: 2
226485-DL0000: RNCC: 3 | RNVC: 2

11 Sep 1998

5975-01-459-4832
Electrical Equipment Cabinet

014594832
570300: RNCC: 3 | RNVC: 2
570300: RNCC: 5 | RNVC: 9

2 Oct 1998

5975-01-694-8937
Electrical-Electronic Equipment Chassis

016948937
RMC-3N: RNCC: 3 | RNVC: 2

3 May 2021

5975-01-695-7694
Electrical Equipment Rack

016957694
030839-0001: RNCC: 3 | RNVC: 2
502082: RNCC: D | RNVC: 9

23 Jun 2021

5975-01-696-8659
Electrical-Electronic Equipment Panel

016968659
3366048-1: RNCC: 3 | RNVC: 2

20 Aug 2021

5975-01-375-2395
Electrical Conduit Tee

013752395
6162.0032: RNCC: 3 | RNVC: 9
6-1-6200-32: RNCC: 5 | RNVC: 9

7 May 1993

5975-01-552-7132
Electrical Conduit Sealing Fitting

015527132
232-DC2: RNCC: 3 | RNVC: 2

21 Jun 2007

5975-01-553-5413
Electrical Equipment Rack

015535413
7124-4010-2: RNCC: 3 | RNVC: 9

18 Jul 2007

5975-01-452-7160
Fanning Strip

014527160
LS5957A028: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-01-452-7886
Electrical Components Tie Down Strap

014527886
435-1169-400: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-01-455-0215
Junction Box

014550215
214820561: RNCC: 3 | RNVC: 2

20 Apr 1998

5975-01-692-7344
Electrical Components Tie Down Strap

016927344
PLB2S-C0: RNCC: 3 | RNVC: 2
BM000359: RNCC: 5 | RNVC: 2
PLB2S-C0: RNCC: 5 | RNVC: 9

8 Jan 2021

5975-01-693-8846
Electrical-Electronic Equipment Chassis

016938846
85PPN: RNCC: 3 | RNVC: 2

9 Mar 2021

5975-01-694-5718
Electrical Equipment Mounting Base

016945718
FORAX-RM-2U-A2L: RNCC: 3 | RNVC: 2

9 Apr 2021

5975-01-375-2403
Flexible Metal Conduit

013752403
6-1-8771-42: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-603-2610
Electrical Equipment Mounting Base

016032610
MT4-4316-104: RNCC: 3 | RNVC: 2

27 Feb 2012

5975-01-553-3589
Interconnecting Box

015533589
KD84420-101: RNCC: 3 | RNVC: 2

13 Jul 2007

5975-01-452-1064
Electrical Conduit End Seal Disk

014521064
3352279-1: RNCC: 3 | RNVC: 2

15 Jan 1998

5975-01-451-8015
Electrical Conduit Coupling

014518015
GW9963: RNCC: 3 | RNVC: 2

5 Jan 1998

5975-01-689-4739
Electrical-Electronic Equipment Panel

016894739
100-PLULTRA16: RNCC: 3 | RNVC: 2

23 Jun 2020

5975-01-321-4472
Cable Marker Sleeve

013214472
SS7074-1731: RNCC: 3 | RNVC: 2

18 Jun 1990

5975-00-557-2804
Electrical Box Connector

005572804
SCD16576GP4: RNCC: 3 | RNVC: 2
SCC28203: RNCC: E | RNVC: 8

1 Jan 1963

5975-01-373-7612
Electrical-Electronic Equipment Panel

013737612
A8201: RNCC: 3 | RNVC: 2

10 Apr 1993

5975-01-373-1019
Electrical Conduit Adapter

013731019
634-3119-001: RNCC: 3 | RNVC: 2

27 Mar 1993

5975-01-373-9512
Flexible Metal Conduit

013739512
6-1-9985-26: RNCC: 3 | RNVC: 2

13 Apr 1993

5975-01-373-9965
Cable Marker Sleeve

013739965
TRSA1014/E/7: RNCC: 3 | RNVC: 2
99045870: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-374-1514
Electrical Box Connector

013741514
6-1-9985-8: RNCC: 3 | RNVC: 2

17 Apr 1993

5975-01-374-6288
Flexible Metal Conduit

013746288
6-1-8771-16: RNCC: 3 | RNVC: 9
6-1-8771-16: RNCC: C | RNVC: 1

27 Apr 1993

5975-01-601-6658
Insulating Kit

016016658
MK3301: RNCC: 3 | RNVC: 2
TO-3: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-01-372-2374
Electrical Equipment Mounting Base

013722374
10104: RNCC: 3 | RNVC: 2
17B9E1000-507: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-688-2972
Electrical Equipment Rack

016882972
DRT 1211C-V0: RNCC: 3 | RNVC: 2

12 May 2020

5975-01-689-3124
Electrical-Electronic Equipment Panel

016893124
10535-2050-01: RNCC: 3 | RNVC: 2

15 Jun 2020

5975-01-690-3261
Electrical Equipment Mounting Base

016903261
452-3075: RNCC: 3 | RNVC: 2

6 Aug 2020

5975-01-040-7386
Guide Rail

010407386
69E13342-12: RNCC: 3 | RNVC: 2

14 May 1977

5975-01-294-6191
Electrical Equipment Mounting Base

012946191
707739-801: RNCC: 3 | RNVC: 2

18 Feb 1989

5975-01-551-3231
Insulator Bracket Strap

015513231
2532490-1: RNCC: 3 | RNVC: 2

14 May 2007

5975-01-478-6166
Electrical Equipment Rack

014786166
70500-24003-046: RNCC: 3 | RNVC: 2

20 Sep 2000

5975-01-687-3328
Electrical Wall Plate

016873328
WPC 220 A EU: RNCC: 3 | RNVC: 2

27 Mar 2020

5975-01-686-5595
Electrical Equipment Rack

016865595
DM40-1008-1: RNCC: 3 | RNVC: 2

24 Feb 2020

5975-01-686-8915
Electrical-Electronic Equipment Chassis

016868915
SCD02474-1: RNCC: 3 | RNVC: 2

10 Mar 2020

5975-01-687-3212
Junction Box

016873212
844E2423-12: RNCC: 3 | RNVC: 2

27 Mar 2020

5975-01-687-9482
Ground Rod

016879482
615850: RNCC: 3 | RNVC: 2

27 Apr 2020

5975-01-688-2125
Electrical Equipment Mounting Base

016882125
RF-5871-VM002: RNCC: 3 | RNVC: 2

7 May 2020

5975-01-372-2383
Electrical Equipment Mounting Base

013722383
10110: RNCC: 3 | RNVC: 2
17B9E1000-519: RNCC: 7 | RNVC: 2

4 Mar 1993

5975-01-371-2875
Ground Rod

013712875
152937-13: RNCC: 3 | RNVC: 2

10 Feb 1993

5975-01-476-5140
Guide Rail

014765140
5260005-2: RNCC: 3 | RNVC: 2

14 Jul 2000

5975-01-476-8855
Cable Marker Sleeve

014768855
013-007382-055: RNCC: 3 | RNVC: 2

25 Jul 2000

5975-01-477-1015
Guide Rail

014771015
5261003-4: RNCC: 3 | RNVC: 2

31 Jul 2000

5975-01-642-6732
Blank Panel

016426732
NOTCHED RFPV1.0: RNCC: 3 | RNVC: 2

4 Mar 2015

5975-01-641-9960
Electrical Equipment Rack

016419960
DMS-3100DC004: RNCC: 3 | RNVC: 2

10 Feb 2015

5975-01-685-8757
Electrical Equipment Rack

016858757
16E5350-807: RNCC: 3 | RNVC: 2
16E5350-807: RNCC: 5 | RNVC: 2

17 Jan 2020

5975-01-034-2963
Electrical-Electronic Equipment Chassis

010342963
G390792: RNCC: 3 | RNVC: 2
G390792: RNCC: 3 | RNVC: 9

22 Jan 1977

5975-01-310-2783
Electrical-Electronic Equipment Chassis

013102783
12-13686-00: RNCC: 3 | RNVC: 2

2 Nov 1989

5975-00-546-7575
Tube Clamp

005467575
D152370L: RNCC: 3 | RNVC: 2
LA152370L: RNCC: 5 | RNVC: 2
D152370L: RNCC: 5 | RNVC: 9
D152370L: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-539-6314
Electrical Conduit Coupling

005396314
WF406TYPEB1A: RNCC: 2 | RNVC: 2
WF408: RNCC: 4 | RNVC: 1
8420: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-01-372-2382
Electrical Equipment Mounting Base

013722382
10108: RNCC: 3 | RNVC: 2
17B9E1000-515: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-548-8109
Flexible Metal Conduit Assembly

015488109
5493230-056: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-01-549-3804
Electrical Components Tie Down Strap

015493804
BT4S-C: RNCC: 3 | RNVC: 2
BT4S-C: RNCC: 5 | RNVC: 2
FEFAPL54N: RNCC: 5 | RNVC: 2

19 Mar 2007

5975-01-549-3346
Electrical Equipment Rack

015493346
065-1185: RNCC: 3 | RNVC: 2

16 Mar 2007

5975-01-476-0070
Junction Box

014760070
22-32141: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-01-365-1615
Electrical-Electronic Equipment Chassis

013651615
902: RNCC: 3 | RNVC: 2

1 Oct 1992

5975-00-534-3554
Cable Marker Sleeve

005343554
5343554: RNCC: 3 | RNVC: 2
5343554: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-534-3595
Cable Marker Sleeve

005343595
5343595: RNCC: 3 | RNVC: 2
5343595: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-450-6300
Electrical Equipment Cabinet

014506300
163747-002: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-01-449-7228
Blank Panel

014497228
965527-101: RNCC: 3 | RNVC: 2

10 Oct 1997

5975-01-361-8682
Electrical Conduit Bushing

013618682
67974: RNCC: 3 | RNVC: 2

28 Jul 1992

5975-01-354-2086
Electrical Box Connector

013542086
414E2061-2: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-01-547-5556
Electronic Equipment Mounting Tray

015475556
WS-C6K-13SLT-FAN2: RNCC: 3 | RNVC: 2
WS-C6K-13SLT-FAN2: RNCC: 5 | RNVC: 2

24 Jan 2007

5975-01-547-4824
Ground Rod

015474824
NCC 5810: RNCC: 3 | RNVC: 2

22 Jan 2007

5975-01-472-2002
Flexible Nonmetallic Conduit

014722002
999536-1: RNCC: 3 | RNVC: 2

22 Feb 2000

5975-01-472-8290
Flexible Nonmetallic Conduit

014728290
343989-9: RNCC: 3 | RNVC: 2

17 Mar 2000

5975-01-473-0076
Electrical Components Tie Down Strap

014730076
345345-1: RNCC: 3 | RNVC: 2

23 Mar 2000

5975-01-473-0449
Junction Box

014730449
VF-002: RNCC: 3 | RNVC: 2
10227: RNCC: 5 | RNVC: 2

24 Mar 2000

5975-01-473-4310
Electrical Equipment Rack

014734310
1017490: RNCC: 3 | RNVC: 2

7 Apr 2000

5975-01-448-0860
Breakout Box Chassis

014480860
34-104151-01: RNCC: 3 | RNVC: 2
34-104151-01: RNCC: 5 | RNVC: 9

20 Aug 1997

5975-01-633-1608
Electrical Equipment Drawer

016331608
CB43833-001: RNCC: 3 | RNVC: 2
40082114: RNCC: 5 | RNVC: 2

12 Nov 2014

5975-01-633-3486
Junction Box

016333486
1000-1467-402: RNCC: 3 | RNVC: 2
40070529: RNCC: 5 | RNVC: 2
1000-1467-401: RNCC: 5 | RNVC: 9

19 Nov 2014

5975-01-633-1213
Electrical Equipment Rack

016331213
AH257B: RNCC: 3 | RNVC: 2

8 Nov 2014

5975-01-545-4788
Interconnecting Cabinet

015454788
450D0100: RNCC: 3 | RNVC: 2
450D0100: RNCC: 5 | RNVC: 2

14 Nov 2006

5975-01-471-0082
Electrical Conduit Ferrule

014710082
051810: RNCC: 3 | RNVC: 2
885B052810: RNCC: 5 | RNVC: 9

19 Jan 2000

5975-01-471-1189
Adapter Assembly

014711189
036700: RNCC: 3 | RNVC: 2

24 Jan 2000

5975-01-631-4222
Mounting. Plate

016314222
195D1148G4: RNCC: 3 | RNVC: 2

13 Sep 2014

5975-01-544-2381
Electrical-Electronic Equipment Chassis

015442381
214938: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-544-8930
Junction Box

015448930
227261-F500000A: RNCC: 3 | RNVC: 2

25 Oct 2006

5975-01-545-3547
Electrical Components Tie Down Strap

015453547
PLC1.5I-S8-M0: RNCC: 3 | RNVC: 2

9 Nov 2006

Load More Results