What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 160 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 160 of 176

5975-01-375-2393
Electrical Box Connector

013752393
6-1-9932-25: RNCC: 3 | RNVC: 2

7 May 1993

5975-00-168-8083
Electrical Equipment Cabinet

001688083
CY2554AGT: RNCC: 3 | RNVC: 2

13 Jan 1971

5975-01-479-9318
Junction Box

014799318
C99A30457-1: RNCC: 3 | RNVC: 9
C99A30457-1: RNCC: C | RNVC: 1

2 Nov 2000

5975-01-479-8171
Electrical Equipment Cabinet

014798171
12349-08-001: RNCC: 3 | RNVC: 2

31 Oct 2000

5975-01-363-5958
Electrical Components Tie Down Strap

013635958
MS3368-1: RNCC: 2 | RNVC: 2

1 Sep 1992

5975-01-676-3429
Electrical Components Tie Down Strap

016763429
VLA080: RNCC: 3 | RNVC: 2

24 Oct 2018

5975-01-676-6536
Electrical Equipment Rack

016766536
RAM-B-202-AP20U: RNCC: 3 | RNVC: 2

6 Nov 2018

5975-01-677-5964
Electrical-Electronic Equipment Chassis

016775964
135382: RNCC: 3 | RNVC: 2

20 Dec 2018

5975-01-392-9552
Junction Box

013929552
TE10640: RNCC: 3 | RNVC: 2

11 Jul 1994

5975-01-478-5508
Interconnecting Box

014785508
KD84349-001: RNCC: 3 | RNVC: 2

18 Sep 2000

5975-01-478-7920
Electrical Equipment Rack

014787920
KD84219-003: RNCC: 3 | RNVC: 2

27 Sep 2000

5975-01-282-2277
Electrical Components Tie Down Strap

012822277
PLT4S-M76: RNCC: 3 | RNVC: 2

11 Jul 1988

5975-01-282-8791
Electrical Conduit Bushing

012828791
8092042-1: RNCC: 3 | RNVC: 2

24 Jul 1988

5975-01-360-7355
Strain Relief Retainer

013607355
6902-1797: RNCC: 3 | RNVC: 2

30 Jun 1992

5975-01-361-3696
Electrical Conduit Bend

013613696
68A311262-2011: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-01-361-7175
Electrical Equipment Cabinet

013617175
1506034G9: RNCC: 3 | RNVC: 9
1506034G9: RNCC: 5 | RNVC: 2

24 Jul 1992

5975-01-362-8770
Electrical-Electronic Equipment Panel

013628770
924000420-009: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-670-7088
Electrical-Electronic Equipment Panel

016707088
D-3889-32: RNCC: 3 | RNVC: 2

2 Mar 2018

5975-01-670-7592
Ground Rod

016707592
RB315: RNCC: 3 | RNVC: 2

6 Mar 2018

5975-01-478-0235
Electrical Equipment Mounting Base

014780235
812880-801: RNCC: 3 | RNVC: 2

28 Aug 2000

5975-01-611-9483
Electrical-Electronic Equipment Chassis

016119483
910-06816: RNCC: 3 | RNVC: 2

28 Sep 2012

5975-01-498-5698
Rigid Metal Conduit

014985698
5HM33101-111: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-6615
Rigid Metal Conduit Assembly

014986615
5HB71101-205: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-5238
Electrical Equipment Rack

014985238
J1502B: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-499-2635
Electrical Fitting Mounting Base

014992635
2003088-101: RNCC: 3 | RNVC: 2

17 Jul 2002

5975-01-499-6967
Stuffing Tube

014996967
17P6E2022-511: RNCC: 3 | RNVC: 2

1 Aug 2002

5975-01-476-4770
Electrical Nonmetallic Conduit Assembly

014764770
70107882-39: RNCC: 3 | RNVC: 2
38597ASSY70107882-39: RNCC: 5 | RNVC: 2

13 Jul 2000

5975-01-105-2670
Electrical Equipment Mounting Base

011052670
622-5370-001: RNCC: 3 | RNVC: 2
MT-6140/ARC-190(V): RNCC: 5 | RNVC: 2

19 Dec 1980

5975-01-110-2488
Electrical Equipment Mounting Base

011102488
622-5664-001: RNCC: 3 | RNVC: 2

28 Mar 1981

5975-01-110-5079
Outlet Box Base

011105079
A163047: RNCC: 3 | RNVC: 9

2 Apr 1981

5975-01-356-2266
Electrical-Electronic Equipment Panel

013562266
687-8365-001: RNCC: 3 | RNVC: 2
687-8365-001: RNCC: 5 | RNVC: 2

30 Mar 1992

5975-01-358-9937
Electrical Conduit Adapter

013589937
710AS002B2216: RNCC: 3 | RNVC: 2

27 May 1992

5975-01-612-8993
Electrical Equipment Rack

016128993
AS08009: RNCC: 3 | RNVC: 2

24 Oct 2012

5975-01-610-6158
Junction Box

016106158
003774-01: RNCC: 3 | RNVC: 2

23 Aug 2012

5975-01-612-1657
Stuffing Tube.

016121657
41008814-002: RNCC: 3 | RNVC: 2

3 Oct 2012

5975-01-452-7918
Fanning Strip

014527918
LS5957B028: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-01-455-6892
Rigid Metal Conduit

014556892
8323-1: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-457-9163
Electrical-Electronic Equipment Chassis

014579163
2351-24030-501: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-462-2325
Electrical-Electronic Equipment Chassis

014622325
8001A: RNCC: 3 | RNVC: 2
8001A: RNCC: 5 | RNVC: 9
188169-001: RNCC: 7 | RNVC: 2

26 Jan 1999

5975-01-462-2595
Electrical Equipment Mounting Base

014622595
622-3909-001: RNCC: 3 | RNVC: 2
741805-101: RNCC: 5 | RNVC: 2
MT-5180/ARC-5140V): RNCC: 5 | RNVC: 2

27 Jan 1999

5975-01-366-5465
Electrical-Electronic Equipment Chassis

013665465
165010G02: RNCC: 3 | RNVC: 2
165010G01: RNCC: 5 | RNVC: 9

28 Oct 1992

5975-01-641-6234
Electrical-Electronic Equipment Chassis

016416234
987-9653-401: RNCC: 3 | RNVC: 2

28 Jan 2015

5975-01-641-4285
Electrical-Electronic Equipment Chassis

016414285
60-1294-02: RNCC: 3 | RNVC: 2
SMB103: RNCC: 5 | RNVC: 2

21 Jan 2015

5975-01-641-7294
Electrical Components Tie Down Strap

016417294
PLT1.5I-C10: RNCC: 3 | RNVC: 2
X8677: RNCC: 5 | RNVC: 2
CV207964: RNCC: 5 | RNVC: 2

30 Jan 2015

5975-01-646-7969
Electronic Equipment Mounting Tray

016467969
MC14-TRAY-9PS: RNCC: 3 | RNVC: 2
25973187: RNCC: 5 | RNVC: 2

30 Jul 2015

5975-01-289-0648
Electrical-Electronic Equipment Chassis

012890648
4031012-913: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-285-0196
Junction Box Cover

012850196
860: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-613-2691
Electrical Equipment Rack

016132691
663201-B21: RNCC: 3 | RNVC: 2

5 Nov 2012

5975-01-608-9557
Flexible Nonmetallic Conduit

016089557
623-4929-003: RNCC: 3 | RNVC: 9

13 Jul 2012

5975-01-609-0573
Electronic Equipment Mounting Tray

016090573
MT6-6311-110: RNCC: 3 | RNVC: 2

13 Jul 2012

5975-01-483-6236
Electrical Equipment Rack

014836236
123SCAV5513-1: RNCC: 1 | RNVC: 2
622-0128-001: RNCC: 3 | RNVC: 2
123SCAV5513-1: RNCC: 5 | RNVC: 9

4 Apr 2001

5975-01-363-5691
Electrical-Electronic Equipment Chassis

013635691
72860201: RNCC: 3 | RNVC: 9
5017484-021: RNCC: 5 | RNVC: 2

1 Sep 1992

5975-01-362-8773
Electrical-Electronic Equipment Panel

013628773
921101040-009: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-285-4250
Insulator Bracket Strap

012854250
11463748: RNCC: 3 | RNVC: 2

14 Sep 1988

5975-01-285-9477
Electrical-Electronic Equipment Chassis

012859477
TRN-5299A: RNCC: 3 | RNVC: 9
TRN-5299A: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-00-006-4498
Electrical Conduit Coupling Nut

000064498
82695: RNCC: 3 | RNVC: 2

23 Jun 1972

5975-01-434-0691
Blank Panel

014340691
571553-5: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-01-481-5365
Electrical-Electronic Equipment Panel

014815365
714955-1: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-01-482-4572
Electrical Conduit Elbow

014824572
713FL101NF14116: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-01-360-8671
Cable Collar

013608671
11771: RNCC: 3 | RNVC: 2

3 Jul 1992

5975-01-361-8683
Interconnecting Box

013618683
10023502: RNCC: 3 | RNVC: 2

28 Jul 1992

5975-01-471-3347
Blank Panel

014713347
7-511B25025-9: RNCC: 3 | RNVC: 2
7-511B25025-9: RNCC: 5 | RNVC: 9

31 Jan 2000

5975-01-473-2235
Metallic Raceway

014732235
341343-2: RNCC: 3 | RNVC: 2

30 Mar 2000

5975-01-141-5942
Electrical Equipment Rack

011415942
16E126-805: RNCC: 3 | RNVC: 2
16E126-801: RNCC: 5 | RNVC: 9

2 Nov 1982

5975-01-283-4085
Electrical-Electronic Equipment Panel

012834085
01630-00203: RNCC: 3 | RNVC: 2
01630-00203: RNCC: 3 | RNVC: 9
01630-00203: RNCC: 5 | RNVC: 9
01630-00203: RNCC: 5 | RNVC: 9

5 Aug 1988

5975-01-622-6937
Electrical Equipment Rack

016226937
115K241G02: RNCC: 3 | RNVC: 2

18 Oct 2013

5975-01-624-5836
Electrical Components Tie Down Strap

016245836
MS3367-1-9: RNCC: 3 | RNVC: 2

8 Jan 2014

5975-01-612-5990
Electrical-Electronic Equipment Chassis

016125990
AT-TN-SPLT-SHELF01: RNCC: 3 | RNVC: 2

16 Oct 2012

5975-01-607-3851
Electrical Equipment Cabinet

016073851
C2RPS-CHAS2: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-607-2047
Blade Switch

016072047
09205071-01: RNCC: 3 | RNVC: 1

5 Jun 2012

5975-01-433-8018
Rack Mount Kit

014338018
10181-5120-01: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-01-358-9936
Electrical Conduit Adapter

013589936
710AS002B2220: RNCC: 3 | RNVC: 2
710AS002B22-20: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-605-7153
Electrical-Electronic Equipment Chassis

016057153
5453-829: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-322-0437
Flexible Nonmetallic Conduit

013220437
717-1614-0: RNCC: 3 | RNVC: 2

28 Jun 1990

5975-01-470-2759
Flexible Metal Conduit Assembly

014702759
230728-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-545: RNCC: 7 | RNVC: 2

13 Dec 1999

5975-01-128-0732
Light Assy Cover

011280732
31-0890-1: RNCC: 3 | RNVC: 2

11 Mar 1982

5975-01-128-2656
Box

011282656
D161309-2: RNCC: 3 | RNVC: 9

20 Mar 1982

5975-01-481-6648
Electrical Equipment Mounting Base

014816648
2000350-1A: RNCC: 3 | RNVC: 9
2000350-1A: RNCC: C | RNVC: 1

18 Jan 2001

5975-01-510-4748
Flexible Metal Conduit Assembly

015104748
15217-5: RNCC: 3 | RNVC: 2

21 Jul 2003

5975-01-468-9227
Electrical Conduit Ferrule

014689227
FERRULE SET 0024: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-9251
Flexible Metal Conduit Assembly

014689251
254710: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-0690
Electrical Equipment Rack

014680690
12004-0200-01: RNCC: 3 | RNVC: 2
32-01330: RNCC: 5 | RNVC: 2
RF-5710A-RM001: RNCC: 5 | RNVC: 2

27 Sep 1999

5975-01-468-9233
Electrical Conduit Wye

014689233
152185: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-259-1456
Chassis Base

012591456
7157281-00: RNCC: 3 | RNVC: 2

14 Jul 1987

5975-01-594-6891
Electrical Equipment Mounting Base

015946891
4600957-1: RNCC: 3 | RNVC: 2
4600957-1: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-01-598-5696
Link Assembly

015985696
478D1003-2: RNCC: 3 | RNVC: 2

12 Aug 2011

5975-01-509-2209
Flexible Metal Conduit

015092209
525-11754-2: RNCC: 3 | RNVC: 2
525-11754-2: RNCC: 5 | RNVC: 9

16 Jun 2003

5975-01-467-7426
Electronic Equipment Mounting Tray

014677426
J1513A: RNCC: 3 | RNVC: 2

13 Sep 1999

5975-01-147-7645
Interconnecting Box

011477645
SK-1926: RNCC: 3 | RNVC: 2

22 Feb 1983

5975-01-245-8641
Blank Panel

012458641
1267695-1: RNCC: 3 | RNVC: 2

6 Dec 1986

5975-01-583-6948
Electrical Chassis

015836948
269147G1: RNCC: 3 | RNVC: 2
269147: RNCC: 5 | RNVC: 9

1 Apr 2010

5975-01-585-8333
Electrical Equipment Cabinet

015858333
107764: RNCC: 3 | RNVC: 2

8 Jun 2010

5975-01-590-4581
Electrical Standardized Components Case

015904581
810AS2651: RNCC: 3 | RNVC: 2

6 Dec 2010

5975-01-508-3613
Guide Rail

015083613
910138-15: RNCC: 3 | RNVC: 2

19 May 2003

5975-01-508-3621
Guide Rail

015083621
910138-13: RNCC: 3 | RNVC: 2

19 May 2003

5975-01-316-4003
Blank Panel

013164003
70550-82159-042: RNCC: 3 | RNVC: 2

8 Mar 1990

5975-01-527-9486
Electrical Box Connector

015279486
227088-F500000A: RNCC: 3 | RNVC: 2

24 Feb 2005

5975-01-526-8895
Electrical Equipment Mounting Base

015268895
96064-01: RNCC: 3 | RNVC: 2

11 Jan 2005

5975-01-527-4532
Electrical Equipment Mounting Base

015274532
17P1E1481-501: RNCC: 3 | RNVC: 2

2 Feb 2005

5975-01-138-5223
Interconnecting Box

011385223
0N516303: RNCC: 3 | RNVC: 2

16 Sep 1982

5975-01-241-0162
Electrical-Electronic Equipment Chassis

012410162
D9409: RNCC: 3 | RNVC: 2

20 Sep 1986

5975-01-244-0940
Electrical Wall Plate

012440940
600-A23868: RNCC: 3 | RNVC: 2

7 Nov 1986

5975-01-292-1320
Electrical-Electronic Equipment Chassis

012921320
25705-503: RNCC: 3 | RNVC: 2

11 Jan 1989

5975-01-598-9045
Guide Rail

015989045
7250255: RNCC: 3 | RNVC: 2
7250255: RNCC: 5 | RNVC: 9

31 Aug 2011

5975-01-599-4894
Electrical Standardized Components Case Section

015994894
011-01570-20: RNCC: 3 | RNVC: 2

29 Sep 2011

5975-01-506-6972
Electrical Components Tie Down Strap

015066972
TY5253MXR: RNCC: 3 | RNVC: 2
WX1159A00: RNCC: 5 | RNVC: 2

7 Apr 2003

5975-01-506-8164
Electrical-Electronic Equipment Chassis

015068164
754366B: RNCC: 3 | RNVC: 2

10 Apr 2003

5975-01-315-6075
Electrical-Electronic Equipment Panel

013156075
66601-159: RNCC: 3 | RNVC: 2
8861610: RNCC: 5 | RNVC: 9

20 Feb 1990

5975-01-526-2627
Electrical-Electronic Equipment Panel

015262627
233N3209-1025: RNCC: 3 | RNVC: 2

13 Dec 2004

5975-01-315-0025
Electrical Equipment Mounting Base

013150025
8055311-0102: RNCC: 3 | RNVC: 2

9 Feb 1990

5975-01-526-0136
Flexible Nonmetallic Conduit

015260136
75A355401-2003: RNCC: 3 | RNVC: 2

3 Dec 2004

5975-01-593-2558
Electrical Equipment Shelf

015932558
352E3302-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-290-3685
Electrical-Electronic Equipment Panel

012903685
70450-81113-042: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-611-7188
Cable Marker Sleeve

016117188
PSPT-250-175YL: RNCC: 3 | RNVC: 2

24 Sep 2012

5975-01-451-2935
Conduit Outlet

014512935
3260005-001: RNCC: 3 | RNVC: 2

11 Dec 1997

5975-01-505-1776
Electrical-Electronic Equipment Chassis

015051776
12019-5000-02: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-504-9333
Electrical Equipment Rack

015049333
5HK01151-109: RNCC: 3 | RNVC: 2

13 Feb 2003

5975-01-601-5730
Electrical Equipment Drawer

016015730
DMK920-17PB: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-289-7092
Electrical Equipment Mounting Base

012897092
622-7302-001: RNCC: 3 | RNVC: 2

28 Nov 1988

5975-01-290-3683
Electrical-Electronic Equipment Panel

012903683
70600-24111-041: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-523-4481
Electrical Equipment Cabinet

015234481
74323-2: RNCC: 3 | RNVC: 2

2 Sep 2004

5975-01-514-7796
Flexible Nonmetallic Conduit

015147796
749-656-1-54.36: RNCC: 3 | RNVC: 2
5D0554-4: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-288-9877
Electrical Equipment Rack

012889877
A3015124: RNCC: 3 | RNVC: 2
MT-6614/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-450-6625
Electrical Cable Nipple

014506625
212N2T02: RNCC: 3 | RNVC: 9

18 Nov 1997

5975-01-435-1434
Cable Marker Sleeve

014351434
M235A774-71: RNCC: 3 | RNVC: 2

15 Aug 1996

5975-01-281-7270
Electrical-Electronic Equipment Panel

012817270
9-390218-01: RNCC: 3 | RNVC: 2

29 Jun 1988

5975-01-522-4986
Cable Marker Sleeve

015224986
SS7074-3802: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-522-4987
Cable Marker Sleeve

015224987
SS7074-3813: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-430-4873
Electrical-Electronic Equipment Panel

014304873
3605000-0501: RNCC: 3 | RNVC: 2

30 Apr 1996

5975-01-559-3373
Electrical Equipment Rack

015593373
125330-5: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-435-2057
Switch Box Case

014352057
29323: RNCC: 3 | RNVC: 2

16 Aug 1996

5975-01-279-3297
Flexible Nonmetallic Conduit

012793297
162989-024: RNCC: 3 | RNVC: 2

16 May 1988

5975-01-521-4067
Electrical Components Tie Down Strap

015214067
6255-14125-3: RNCC: 3 | RNVC: 2

21 Jun 2004

5975-01-521-8674
Electronic Equipment Mounting Tray

015218674
7014702-901: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-01-247-2117
Electrical Components Tie Down Strap

012472117
GTR42-10N: RNCC: 3 | RNVC: 2

29 Dec 1986

5975-01-242-4987
Electrical Equipment Shelf

012424987
528104-1: RNCC: 3 | RNVC: 2

12 Oct 1986

5975-01-245-9429
Electrical-Electronic Equipment Chassis

012459429
802031-1: RNCC: 3 | RNVC: 2

6 Dec 1986

5975-01-559-0252
Connector Tip Cleaning

015590252
FCLT-MIL-2R: RNCC: 3 | RNVC: 2

3 Dec 2007

5975-01-447-8888
Electrical-Electronic Equipment Panel

014478888
77-104851-02: RNCC: 3 | RNVC: 2
77-104851-02: RNCC: 5 | RNVC: 9

15 Aug 1997

5975-01-447-5640
Blank Panel

014475640
0N632768-501: RNCC: 3 | RNVC: 2

8 Aug 1997

5975-01-447-0870
Electrical-Electronic Equipment Chassis

014470870
34-103874-01: RNCC: 3 | RNVC: 2
34-103874-01: RNCC: 5 | RNVC: 9

24 Jul 1997

5975-01-448-1344
Electrical Equipment Rack

014481344
31-102182-01: RNCC: 3 | RNVC: 2
31-102182-01: RNCC: 5 | RNVC: 9

21 Aug 1997

5975-01-448-2993
Chassis Base

014482993
719239-2: RNCC: 3 | RNVC: 2

26 Aug 1997

5975-01-443-3041
Interconnecting Cabinet

014433041
4010: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-434-7459
Electrical Equipment Cabinet

014347459
100H231GP1,GP3: RNCC: 3 | RNVC: 1

6 Aug 1996

5975-01-520-5425
Junction Box

015205425
377-07275-000: RNCC: 3 | RNVC: 2
377-07275-000: RNCC: 5 | RNVC: 2

14 May 2004

5975-01-521-1491
Electrical Equipment Mounting Base

015211491
232536-1: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-01-506-4240
Electrical-Electronic Equipment Chassis

015064240
717459380-009: RNCC: 3 | RNVC: 2

28 Mar 2003

5975-01-248-9329
Electrical Equipment Cabinet

012489329
0N334045: RNCC: 3 | RNVC: 2
CY-8322(V)2/FYQ-107(V): RNCC: 5 | RNVC: 2

2 Feb 1987

5975-01-392-7990
Electrical Equipment Mounting Base

013927990
39361-1: RNCC: 3 | RNVC: 2
39361-1: RNCC: 5 | RNVC: 9

6 Jul 1994

5975-01-446-5012
Blank Panel

014465012
LTR329: RNCC: 3 | RNVC: 9

7 Jul 1997

5975-01-446-5010
Blank Panel

014465010
LTR328: RNCC: 3 | RNVC: 9

7 Jul 1997

5975-01-447-5641
Electrical Equipment Mounting Base

014475641
0N632756-2: RNCC: 3 | RNVC: 2

8 Aug 1997

5975-01-442-0585
Conduit Outlet Cover

014420585
270: RNCC: 3 | RNVC: 2

4 Mar 1997

5975-01-519-7520
Electrical-Electronic Equipment Panel

015197520
1Z7628: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-519-8893
Electrical Equipment Mounting Base

015198893
8200580G1: RNCC: 3 | RNVC: 2

5 May 2004

5975-01-345-7915
Electrical Conduit Adapter

013457915
C007DX1220AA/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-276-0109
Electrical-Electronic Equipment Panel

012760109
10121-2005: RNCC: 3 | RNVC: 2

2 Apr 1988

5975-01-519-0442
Electrical Conduit Coupling

015190442
H316A002-102: RNCC: 3 | RNVC: 2

2 Apr 2004

5975-01-603-4893
Electrical-Electronic Equipment Chassis

016034893
ACP-2320MB0-00BE: RNCC: 3 | RNVC: 2
62566433AA: RNCC: 5 | RNVC: 2

5 Mar 2012

5975-00-903-2283
Electrical Components Tie Down Strap

009032283
TY35M2: RNCC: 3 | RNVC: 2

15 Feb 1967

5975-01-445-6261
Electrical Cable Protector

014456261
9040461-14: RNCC: 3 | RNVC: 2

9 Jun 1997

5975-01-445-3166
Electrical-Electronic Equipment Chassis

014453166
ASP841ENC: RNCC: 3 | RNVC: 9

29 May 1997

5975-01-445-1032
Flexible Metal Conduit Assembly

014451032
749-257: RNCC: 3 | RNVC: 2
749-257: RNCC: 5 | RNVC: 2

23 May 1997

5975-01-517-7175
Electrical Equipment Rack

015177175
1009353: RNCC: 3 | RNVC: 2

18 Feb 2004

5975-01-518-1560
Junction Box

015181560
6135851-9: RNCC: 3 | RNVC: 2

3 Mar 2004

5975-01-443-8147
Electrical Components Tie Down Strap

014438147
GTR112G14N: RNCC: 3 | RNVC: 2

18 Apr 1997

5975-01-443-3054
Blank Panel

014433054
40107A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-7239
Electrical Equipment Mounting Base

014437239
1073026: RNCC: 3 | RNVC: 2
27112371-7: RNCC: 5 | RNVC: 2
27112371-7: RNCC: 5 | RNVC: 9

16 Apr 1997

5975-01-369-3738
Electrical Tie Down Mounting Base

013693738
TM3S25C: RNCC: 3 | RNVC: 2

22 Dec 1992

5975-01-273-7730
Electrical Conduit Adapter

012737730
W8366N223W6: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-517-2525
Cable Hanger

015172525
6547E801-3: RNCC: 3 | RNVC: 2

3 Feb 2004

5975-01-516-9998
Electrical Equipment Rack

015169998
ASP-TCAS735-204: RNCC: 3 | RNVC: 2

27 Jan 2004

5975-01-517-8565
Electrical Grounding Plate

015178565
123AV15100-511: RNCC: 3 | RNVC: 2
123AV15100-511: RNCC: 5 | RNVC: 9

23 Feb 2004

5975-01-595-5354
Prom Flash

015955354
216C9881VER1.05: RNCC: 3 | RNVC: 1
WF1M32B-100HM3: RNCC: 5 | RNVC: 1

2 May 2011

5975-01-595-2252
Ground Rod

015952252
155300: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-388-3413
Check Comb

013883413
4052-T: RNCC: 3 | RNVC: 9
7000031451: RNCC: C | RNVC: 1

28 Mar 1994

5975-01-362-2679
Electrical Conduit Locknut

013622679
B040-26-01: RNCC: 3 | RNVC: 2

4 Aug 1992

5975-01-362-2573
Electrical Equipment Cabinet

013622573
G0143M007-002: RNCC: 3 | RNVC: 9

4 Aug 1992

5975-01-515-6214
Rigid Metal Conduit

015156214
6-52476-3: RNCC: 3 | RNVC: 9
6-52476-3: RNCC: C | RNVC: 1

2 Dec 2003

5975-01-516-3110
Electrical Bonding Ring

015163110
AII-MTS-01-214APPENDIXBITEM10: RNCC: 3 | RNVC: 1
DOD-STD-2003FIG3A211: RNCC: 5 | RNVC: 1

31 Dec 2003

5975-01-562-7804
Electrical Equipment Mounting Base

015627804
792-6319-002: RNCC: 3 | RNVC: 2

22 Apr 2008

5975-01-563-4189
Electrical Bushing

015634189
RW164-4: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-4186
Electrical Bushing

015634186
RW85-3: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-564-8727
Electrical Equipment Rack

015648727
2210068-205: RNCC: 1 | RNVC: 2
69-0186-01: RNCC: 3 | RNVC: 2

1 Jul 2008

5975-01-563-4190
Electrical Bushing

015634190
RW85-20: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-566-1900
Electrical Conduit Adapter

015661900
712HL116A1532C: RNCC: 3 | RNVC: 2

22 Aug 2008

5975-01-566-1896
Electrical Conduit Adapter

015661896
712HL116A1524C: RNCC: 3 | RNVC: 2

22 Aug 2008

5975-01-594-0390
Spec Conduit Assy

015940390
5822451-5: RNCC: 3 | RNVC: 2

22 Apr 2011

5975-01-594-5389
Electrical-Electronic Equipment Chassis

015945389
779218-01: RNCC: 3 | RNVC: 2
NI PXI-1044: RNCC: 5 | RNVC: 2
779218-01: RNCC: 5 | RNVC: 2
NI PXI-1044: RNCC: 5 | RNVC: 2
779218-01: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-01-594-8353
Electrical Nonmetallic Conduit Assembly

015948353
LS10046C0082DEN: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-563-6319
Switch Box Case

015636319
62114-2: RNCC: 3 | RNVC: 2

15 May 2008

5975-01-187-9207
Cable Tie Mount

011879207
ABMM-AC30: RNCC: 3 | RNVC: 2

27 Aug 1984

5975-00-899-7943
Electrical Box Connector

008997943
4233: RNCC: 3 | RNVC: 2
8125W: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-441-5395
Electroni Enclosure

014415395
G5-E17A: RNCC: 3 | RNVC: 9

14 Feb 1997

5975-01-442-7971
Electrical Equipment Foot

014427971
6259-2W/W: RNCC: 3 | RNVC: 2

24 Mar 1997

5975-01-414-6141
Electrical Equipment Rack

014146141
1261AH: RNCC: 3 | RNVC: 2

9 Jun 1995

5975-01-440-5455
Electrical Equipment Cabinet

014405455
PE522: RNCC: 3 | RNVC: 9

16 Jan 1997

5975-01-440-6385
Electrical Equipment Rack

014406385
5498161-7: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-01-440-6381
Junction Box Assembly

014406381
5498056-29: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-01-578-7999
Electrical Equipment Cabinet

015787999
030780-0001: RNCC: 3 | RNVC: 2

20 Oct 2009

5975-01-578-4899
Electrical Equipment Rack

015784899
5110040-1: RNCC: 3 | RNVC: 2

7 Oct 2009

5975-01-578-8408
Cable Marker Sleeve

015788408
TMS-SCE-3/16-2.0-S2-4: RNCC: 3 | RNVC: 2
TMS-SCE-3/16-2.0-S2-4: RNCC: 5 | RNVC: 2

21 Oct 2009

5975-01-577-8784
Chassis Base

015778784
IQ1000: RNCC: 3 | RNVC: 2

21 Sep 2009

5975-01-439-7132
Electrical Components Tie Down Strap

014397132
AE 713: RNCC: 3 | RNVC: 2

17 Dec 1996

5975-01-291-6137
Electrical Equipment Mounting Base

012916137
0020220010: RNCC: 3 | RNVC: 2
2022: RNCC: 5 | RNVC: 9

31 Dec 1988

5975-01-465-9744
Electrical Equipment Rack

014659744
D6077A: RNCC: 3 | RNVC: 2

29 Jun 1999

5975-01-465-9752
Electrical Equipment Cabinet

014659752
35202RU: RNCC: 3 | RNVC: 2

29 Jun 1999

5975-01-553-1848
Electrical Equipment Rack

015531848
ATR S53001-01: RNCC: 3 | RNVC: 2

10 Jul 2007

5975-01-557-2453
Electrical Equipment Drawer

015572453
S-RSU: RNCC: 3 | RNVC: 9

16 Oct 2007

5975-01-378-2882
Junction Box Cover

013782882
13027538: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-438-7271
Metallic Raceway Assembly

014387271
1090235: RNCC: 3 | RNVC: 2

18 Nov 1996

5975-01-439-3688
Electrical Equipment Cabinet

014393688
165753-003: RNCC: 3 | RNVC: 2

5 Dec 1996

5975-01-439-3685
Electrical-Electronic Equipment Panel

014393685
189907-001: RNCC: 3 | RNVC: 2

5 Dec 1996

5975-01-576-5660
Electrical-Electronic Equipment Chassis

015765660
72D245046-1007: RNCC: 3 | RNVC: 2

6 Aug 2009

5975-01-290-3682
Electrical-Electronic Equipment Panel

012903682
70600-24106-041: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-290-0861
Cable Strain Relief Bushing

012900861
57905400-01: RNCC: 3 | RNVC: 9

6 Dec 1988

5975-01-290-0860
Cable Strain Relief Bushing

012900860
57905400-02: RNCC: 3 | RNVC: 9

6 Dec 1988

5975-01-465-9731
Electrical Equipment Shelf

014659731
J1520A: RNCC: 3 | RNVC: 2

29 Jun 1999

5975-01-465-8027
Flexible Metal Conduit Assembly

014658027
S6162-63806-6: RNCC: 3 | RNVC: 2

22 Jun 1999

5975-01-552-8409
Junction Box

015528409
86301-482: RNCC: 3 | RNVC: 2

26 Jun 2007

5975-01-551-7000
Junction Box Assembly

015517000
283130-0001: RNCC: 3 | RNVC: 2
5975PL0550229: RNCC: 6 | RNVC: 9

23 May 2007

5975-01-552-8407
Conduit Outlet

015528407
70100X45: RNCC: 3 | RNVC: 2

26 Jun 2007

5975-01-289-0925
Electrical Box Connector

012890925
11-300: RNCC: 3 | RNVC: 9

17 Nov 1988

5975-01-463-5011
Foot Option

014635011
9605A: RNCC: 3 | RNVC: 2

24 Mar 1999

5975-01-589-9378
Electrical Equipment Mounting Base

015899378
M123027: RNCC: 3 | RNVC: 2
M123027: RNCC: 3 | RNVC: 9

9 Nov 2010

5975-01-591-0286
Electrical Equipment Mounting Base

015910286
M093116-101: RNCC: 3 | RNVC: 2
M093116-101: RNCC: 3 | RNVC: 9

7 Jan 2011

5975-01-591-3578
Electrical Components Tie Down Strap

015913578
L-8-50R-0-C: RNCC: 3 | RNVC: 2

21 Jan 2011

5975-01-229-0868
Electrical Equipment Cabinet

012290868
CY-8409/FSC: RNCC: 3 | RNVC: 2

26 Mar 1986

5975-01-231-5051
Cable Marker Sleeve

012315051
411621-10-D: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-375-2803
Electrical-Electronic Equipment Panel

013752803
68733-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2801
Electrical-Electronic Equipment Panel

013752801
68731-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-591-0697
Mounting Plate

015910697
M035053: RNCC: 3 | RNVC: 2
M035053: RNCC: 3 | RNVC: 9

10 Jan 2011

5975-01-594-3188
Electrical Components Tie Down Strap

015943188
205-9920: RNCC: 3 | RNVC: 2
205-9920: RNCC: 5 | RNVC: 2
205-9920: RNCC: 5 | RNVC: 2
205-9920: RNCC: 5 | RNVC: 2
205-9920: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-01-463-6381
Electrical-Electronic Equipment Chassis

014636381
2216296-004: RNCC: 3 | RNVC: 2

30 Mar 1999

5975-01-463-9397
Electrical-Electronic Equipment Chassis

014639397
3895-4500-002: RNCC: 3 | RNVC: 2
3895-4500: RNCC: D | RNVC: 9

9 Apr 1999

5975-01-586-5710
Electrical-Electronic Equipment Chassis

015865710
120197-102: RNCC: 3 | RNVC: 2

3 Jul 2010

5975-01-231-9306
Electrical Equipment Mounting Base

012319306
1802631-04: RNCC: 3 | RNVC: 9
100171-9007-334: RNCC: 5 | RNVC: 9
100171-9007-334: RNCC: 5 | RNVC: 9
1802631-03: RNCC: 5 | RNVC: 9

6 May 1986

5975-01-552-3171
Electrical Equipment Mounting Base

015523171
719-0070-001: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-572-9889
Electrical Equipment Rack

015729889
424057-01-01: RNCC: 3 | RNVC: 2

2 Apr 2009

5975-01-583-7984
Electrical Equipment Rack

015837984
5HU50300-121: RNCC: 3 | RNVC: 2

6 Apr 2010

5975-01-582-5349
Junction Box

015825349
L3239A: RNCC: 3 | RNVC: 2

24 Feb 2010

5975-01-583-6944
Electrical Chassis

015836944
269314G1: RNCC: 3 | RNVC: 2
269314: RNCC: 5 | RNVC: 9

1 Apr 2010

5975-01-222-7151
Front Assembl Panel

012227151
251-42227: RNCC: 3 | RNVC: 9

16 Dec 1985

5975-01-221-7957
Flexible Metal Conduit Assembly

012217957
112701: RNCC: 3 | RNVC: 2
112701: RNCC: 5 | RNVC: 9

4 Dec 1985

5975-01-373-7679
Electrical Box Connector

013737679
25211: RNCC: 3 | RNVC: 2

10 Apr 1993

5975-01-572-7340
Electrical-Electronic Equipment Chassis

015727340
IPC-610BP-300: RNCC: 3 | RNVC: 2

23 Mar 2009

5975-01-445-1192
Electrical-Electronic Equipment Chassis

014451192
AD1402001: RNCC: 3 | RNVC: 9

23 May 1997

5975-01-570-6800
Blank Panel

015706800
4HP605: RNCC: 3 | RNVC: 2
4HP605GM: RNCC: 5 | RNVC: 2

8 Jan 2009

5975-01-572-1635
Electronic Junction Rack

015721635
RR1061-9: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-572-1624
Electronic Junction Rack

015721624
RR1061-16: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-285-9493
Electrical-Electronic Equipment Chassis

012859493
TLD-9252A: RNCC: 3 | RNVC: 9
TLD-9252A: RNCC: 5 | RNVC: 9

23 Sep 1988

5975-01-285-0267
Rack Mounting Kit

012850267
950000: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-285-8641
Electrical-Electronic Equipment Chassis

012858641
7012431-902: RNCC: 3 | RNVC: 2

22 Sep 1988

5975-01-580-5925
Electrical Equipment Rack

015805925
AF021A: RNCC: 3 | RNVC: 2
HP 10622 G2 22U: RNCC: 5 | RNVC: 2

18 Dec 2009

5975-01-580-1325
Electrical-Electronic Equipment Panel

015801325
51-0350-01J: RNCC: 3 | RNVC: 2

5 Dec 2009

5975-01-581-6646
Junction Box

015816646
914021-3: RNCC: 3 | RNVC: 2

25 Jan 2010

5975-01-569-9557
Electrical-Electronic Equipment Chassis

015699557
14711-12: RNCC: 3 | RNVC: 2
YK959: RNCC: 5 | RNVC: 2
310-9689: RNCC: 5 | RNVC: 2

11 Dec 2008

5975-01-570-1382
Electrical Equipment Rack Base

015701382
204-32758-6: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-2539
Mounting Kit

015702539
T5935-0115-007: RNCC: 3 | RNVC: 2

18 Dec 2008

5975-01-570-9919
Junction Box Assembly

015709919
10116922-101: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-570-4059
Electrical Equipment Cabinet Top Assy

015704059
204-57462-3: RNCC: 3 | RNVC: 2

29 Dec 2008

5975-01-570-9934
Electrical-Electronic Equipment Panel

015709934
10115712-101: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-570-2823
Electrical Components Tie Down Strap

015702823
TYH24M: RNCC: 3 | RNVC: 2

19 Dec 2008

5975-01-569-4949
Electrical Bushing

015694949
RX35-6: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-460-2791
Electrical Equipment Mounting Base

014602791
95952-1: RNCC: 3 | RNVC: 2

30 Oct 1998

5975-01-461-2928
Electrical-Electronic Equipment Panel

014612928
11465130: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-579-3861
Electronic Equipment Mounting Tray

015793861
16E1712-27: RNCC: 3 | RNVC: 2

10 Nov 2009

5975-01-172-4044
Panel Assembly Atr

011724044
784-5872-001: RNCC: 3 | RNVC: 2

20 Feb 1984

5975-01-515-2593
Electrical Conductor Protector

015152593
620058 69: RNCC: 3 | RNVC: 2

19 Nov 2003

5975-01-442-4646
Electrical Equipment Rack

014424646
90400026: RNCC: 3 | RNVC: 2

14 Mar 1997

5975-01-569-2313
Blank Panel

015692313
86101-60005: RNCC: 3 | RNVC: 2
86101-60005: RNCC: 3 | RNVC: 9

24 Nov 2008

5975-01-569-4947
Electrical Bushing

015694947
RW309-7: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-570-0136
Bridle Ring

015700136
204-44941-2: RNCC: 3 | RNVC: 2

12 Dec 2008

5975-01-570-2036
Electrical-Electronic Equipment Chassis

015702036
TA3320R00N00DISK: RNCC: 3 | RNVC: 2

17 Dec 2008

5975-01-570-0112
Electrical Equipment Rack

015700112
2004040-009: RNCC: 3 | RNVC: 2

12 Dec 2008

5975-01-570-0250
Electrical Tie Down Mounting Base

015700250
NMCSB7000UG2NH4: RNCC: 3 | RNVC: 2

12 Dec 2008

5975-01-570-2822
Electrical Components Tie Down Strap

015702822
TYH28M: RNCC: 3 | RNVC: 2

19 Dec 2008

5975-01-569-4948
Electrical Bushing

015694948
RW309-17: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-460-2757
Electrical-Electronic Equipment Chassis

014602757
301001-1: RNCC: 3 | RNVC: 2

30 Oct 1998

5975-01-538-0536
Flexible Metal Conduit Assembly

015380536
18547-2: RNCC: 3 | RNVC: 9
18547-2: RNCC: C | RNVC: 1

8 Mar 2006

5975-01-536-1035
Cable Shoe

015361035
151745: RNCC: 3 | RNVC: 9

20 Dec 2005

5975-01-536-4684
Electrical-Electronic Equipment Chassis

015364684
CHAS-7507: RNCC: 3 | RNVC: 2

5 Jan 2006

5975-01-440-7901
Electrical-Electronic Equipment Panel

014407901
5498342-39: RNCC: 3 | RNVC: 2

24 Jan 1997

5975-01-269-9513
Electrical Equipment Rack

012699513
3498A-908: RNCC: 3 | RNVC: 2
3498A-908: RNCC: 3 | RNVC: 9
3498AOPT908: RNCC: 5 | RNVC: 9

24 Dec 1987

5975-01-525-4846
Electronic Equipment Mounting Tray

015254846
12019-0450-01: RNCC: 3 | RNVC: 2

10 Nov 2004

5975-01-526-3685
Electrical Components Tie Down Strap

015263685
MLT6DSH-Q316: RNCC: 3 | RNVC: 2

15 Dec 2004

5975-01-527-3554
Electronic Equipment Mounting Tray

015273554
4074010-0701: RNCC: 3 | RNVC: 2

28 Jan 2005

5975-01-527-8960
Ground Rod

015278960
12020-9527-01: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-528-1840
Electrical-Electronic Equipment Chassis

015281840
4845-4500-001: RNCC: 3 | RNVC: 2

4 Mar 2005

5975-01-614-8524
Nonmetallic Raceway

016148524
2278134-1: RNCC: 3 | RNVC: 2
2278134-1: RNCC: 5 | RNVC: 2

17 Dec 2012

5975-01-614-1392
Electrical-Electronic Equipment Chassis

016141392
10558-2000-03: RNCC: 3 | RNVC: 2

28 Nov 2012

5975-01-458-4401
Electrical-Electronic Equipment Chassis

014584401
E-MCR-01: RNCC: 3 | RNVC: 9

26 Aug 1998

5975-01-524-2736
Electrical Conduit Elbow

015242736
AS519D1212D: RNCC: 3 | RNVC: 2
AS519D1212D: RNCC: 3 | RNVC: 9

27 Sep 2004

5975-01-499-1519
Electrical Components Tie Down Strap

014991519
10249-3009-01: RNCC: 3 | RNVC: 2

15 Jul 2002

5975-01-613-1421
Electrical Equipment Rack

016131421
663203-B21: RNCC: 3 | RNVC: 2

31 Oct 2012

5975-01-457-1659
Electrical-Electronic Equipment Chassis

014571659
725758-802: RNCC: 3 | RNVC: 2

14 Jul 1998

5975-01-456-7028
Electronic Equipment Mounting Tray

014567028
462570-01: RNCC: 3 | RNVC: 2
462570-01: RNCC: 3 | RNVC: 9
462570-01: RNCC: 5 | RNVC: 2

23 Jun 1998

5975-01-570-1278
Strain Electrical Conductor Clamp

015701278
BACC10D616A: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-0423
Electrical Equipment Cabinet

015700423
14701-3: RNCC: 3 | RNVC: 2

15 Dec 2008

5975-01-569-4943
Electrical Bushing

015694943
RW309-13: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-570-1379
Electrical Equipment Rack Base

015701379
204-32758-5: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-569-4959
Electrical Bushing

015694959
RL39-3: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-437-6698
Electrical Equipment Mounting Base

014376698
HLN5189AR: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-455-6895
Rigid Metal Conduit

014556895
8318-1: RNCC: 3 | RNVC: 2

12 May 1998

5975-01-455-7650
Raceway Cover

014557650
8902-5: RNCC: 3 | RNVC: 2

14 May 1998

5975-01-455-6723
Rigid Metal Conduit

014556723
8321-1: RNCC: 3 | RNVC: 2

11 May 1998

5975-01-456-1423
Junction Box Assembly

014561423
068012: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-456-5243
Electrical-Electronic Equipment Chassis

014565243
11467698: RNCC: 3 | RNVC: 2

16 Jun 1998

5975-01-455-7316
Rigid Metal Conduit

014557316
8327-1: RNCC: 3 | RNVC: 2

13 May 1998

5975-01-518-5113
Electronic Equipment Mounting Tray

015185113
D9G87-00282: RNCC: 3 | RNVC: 2

15 Mar 2004

5975-01-518-9625
Engine Fire Control

015189625
233N6205-12: RNCC: 3 | RNVC: 2

30 Mar 2004

5975-01-519-4331
Electrical Equipment Mounting Base

015194331
11438656-007: RNCC: 3 | RNVC: 2

19 Apr 2004

5975-01-519-4290
Cable Marker Sleeve

015194290
10253825-005: RNCC: 3 | RNVC: 2

19 Apr 2004

5975-01-303-6755
Electrical Components Tie Down Strap

013036755
696-40527-3-7: RNCC: 3 | RNVC: 2
696-40527-3-7-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-303-6754
Electrical Components Tie Down Strap

013036754
696-40527-3-9: RNCC: 3 | RNVC: 2
696-40527-3-9-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-567-6168
Junction Box Cover

015676168
687-500 M 10: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-569-2490
Electrical Box Sealing Flange

015692490
47128-11-7: RNCC: 3 | RNVC: 2

24 Nov 2008

5975-01-610-4823
Electrical-Electronic Equipment Chassis

016104823
40006032-000: RNCC: 3 | RNVC: 2

18 Aug 2012

5975-01-454-6549
Electrical-Electronic Equipment Panel

014546549
050388: RNCC: 3 | RNVC: 2
050388: RNCC: 5 | RNVC: 2
PCAMI/1400000050388: RNCC: 5 | RNVC: 2

8 Apr 1998

5975-01-454-2055
Electrical Tie Down Mounting Base

014542055
CB4021V3N8: RNCC: 3 | RNVC: 2
9D0272-101: RNCC: 3 | RNVC: 2

23 Mar 1998

5975-01-549-4827
Electrical-Electronic Equipment Chassis

015494827
629-8472-002: RNCC: 3 | RNVC: 2

21 Mar 2007

5975-00-174-8121
Fanning Strip

001748121
1681937P1: RNCC: 3 | RNVC: 2

24 Feb 1973

5975-01-302-1042
Electrical Equipment Cabinet

013021042
CY-7786A/FCC-98(V): RNCC: 3 | RNVC: 2
17025-020A: RNCC: 5 | RNVC: 9

10 Jun 1989

5975-01-301-1713
Bulkhead Union

013011713
25436-71: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-436-0630
Electrical Equipment Mounting Base

014360630
622-7230-001: RNCC: 3 | RNVC: 2
16VE293002: RNCC: 7 | RNVC: 2

10 Sep 1996

5975-01-454-2193
Electrical Tie Down Mounting Base

014542193
CB4021V3N16: RNCC: 3 | RNVC: 2
9D0272-103: RNCC: 3 | RNVC: 2

24 Mar 1998

5975-01-542-7640
Junction Box Assembly

015427640
5612627: RNCC: 3 | RNVC: 2

17 Aug 2006

5975-01-563-3995
Electrical Equipment Cabinet

015633995
90-351-X: RNCC: 3 | RNVC: 2

9 May 2008

5975-01-608-0929
Average Cell Voltag

016080929
24KV-160KVA: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-451-7034
Electrical Equipment Cabinet

014517034
43H2950: RNCC: 3 | RNVC: 2

29 Dec 1997

5975-01-452-2462
Box Iron Lung Assembly

014522462
374280-1L: RNCC: 3 | RNVC: 2

21 Jan 1998

5975-01-539-7084
Conduit Outlet Cover

015397084
CFPFS2AW: RNCC: 3 | RNVC: 2

28 Apr 2006

5975-01-542-5825
Electrical-Electronic Equipment Chassis

015425825
0N697050-1: RNCC: 3 | RNVC: 2

10 Aug 2006

5975-01-541-7471
Electrical Components Tie Down Strap

015417471
H0922: RNCC: 3 | RNVC: 2
514-08387: RNCC: 5 | RNVC: 2

10 Jul 2006

5975-01-370-8789
Chassis Base

013708789
646-8466-001: RNCC: 3 | RNVC: 2

3 Feb 1993

5975-01-607-6129
Electrical Conduit End Seal Disk

016076129
514-1905-002: RNCC: 3 | RNVC: 9

8 Jun 2012

5975-01-607-3858
Electrical Equipment Cabinet

016073858
S4-CHASSIS: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-607-3779
Electrical-Electronic Equipment Chassis

016073779
BK831A: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-536-2334
Flexible Metal Conduit Assembly

015362334
227759-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-559-5615
Electrical Equipment Mounting Base

015595615
4102311-1: RNCC: 3 | RNVC: 2
706A35402204: RNCC: 5 | RNVC: 2
4102311-1: RNCC: 5 | RNVC: 2

20 Dec 2007

5975-01-369-8160
Electrical-Electronic Equipment Panel

013698160
04700-00-001: RNCC: 3 | RNVC: 9

7 Jan 1993

5975-01-304-8530
Electrical Equipment Rack

013048530
A3047251: RNCC: 3 | RNVC: 2
MT-6655/G: RNCC: 5 | RNVC: 2

28 Jul 1989

5975-01-359-9616
Electrical-Electronic Equipment Chassis

013599616
687-2642-004: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-01-360-0627
Electrical Conduit Adapter

013600627
7: RNCC: 3 | RNVC: 2
1857086-11: RNCC: 7 | RNVC: 2

17 Jun 1992

5975-01-360-8562
Electrical-Electronic Equipment Chassis

013608562
62000709-000: RNCC: 3 | RNVC: 2

3 Jul 1992

5975-01-535-3971
Cable Marker Sleeve

015353971
M235A774-151: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-199-6360
Electrical Grounding Plate

011996360
0N326715-1: RNCC: 3 | RNVC: 2

24 Jan 1985

5975-01-556-9697
Electrical-Electronic Equipment Chassis

015569697
200-0000-00: RNCC: 3 | RNVC: 2

10 Oct 2007

5975-01-557-2792
Electrical Equipment Rack

015572792
X6839A-2: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-603-7471
Electrical Equipment Cabinet

016037471
X870C-R6-C: RNCC: 3 | RNVC: 2

14 Mar 2012

5975-01-604-1311
Electrical Equipment Shelf

016041311
3042: RNCC: 3 | RNVC: 2

27 Mar 2012

5975-01-604-2046
Electrical-Electronic Equipment Chassis

016042046
ECIMLN-MSW5049-12: RNCC: 3 | RNVC: 2

29 Mar 2012

5975-01-604-2991
Electrical Chassis

016042991
V2P-SCSI: RNCC: 3 | RNVC: 2

2 Apr 2012

5975-01-303-6756
Electrical Components Tie Down Strap

013036756
696-40527-1-4: RNCC: 3 | RNVC: 2
696-40527-1-4-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-303-6749
Electrical Components Tie Down Strap

013036749
696-40527-5-7: RNCC: 3 | RNVC: 2
696-40527-5-7-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-302-8780
Switch Terminal Cover

013028780
12-14623-04: RNCC: 3 | RNVC: 2

21 Jun 1989

5975-01-302-8205
Electrical Components Tie Down Strap

013028205
696-40527-6-0: RNCC: 3 | RNVC: 2
696-40527-6-0-C: RNCC: 5 | RNVC: 2

20 Jun 1989

5975-01-358-0357
Electrical-Electronic Equipment Chassis

013580357
1003767900: RNCC: 3 | RNVC: 2

6 May 1992

5975-01-358-9938
Electrical Conduit Adapter

013589938
712AC157B1816-1: RNCC: 3 | RNVC: 2
712AC157B1816-1: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-358-9930
Electrical Conduit Adapter

013589930
710DS004B1009: RNCC: 3 | RNVC: 2

27 May 1992

5975-01-358-5118
Electrical Components Tie Down Strap

013585118
TY27MFR: RNCC: 3 | RNVC: 2
212-8100: RNCC: 5 | RNVC: 2
38266: RNCC: 5 | RNVC: 2

14 May 1992

5975-01-024-5142
Electrical Channel

010245142
PS-210-H1 7/8 PLAIN 10 FT: RNCC: 3 | RNVC: 9

12 Jul 1976

5975-01-301-0047
Pe Controller

013010047
1663626-101: RNCC: 3 | RNVC: 2

23 May 1989

5975-01-356-7867
Electrical Components Tie Down Strap

013567867
PLC2S-S10-M30: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-554-0573
Blank Panel

015540573
70-090-12: RNCC: 3 | RNVC: 2

27 Jul 2007

5975-01-554-6985
Electrical-Electronic Equipment Chassis

015546985
530125-110: RNCC: 3 | RNVC: 2

16 Aug 2007

5975-01-601-4718
Rigid Metal Conduit

016014718
6-52476-5: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-573-3487
Electrical Conduit Adapter

015733487
717-321: RNCC: 3 | RNVC: 2

17 Apr 2009

5975-01-574-0741
Chassis Base

015740741
7190095-05: RNCC: 3 | RNVC: 2

14 May 2009

5975-01-011-3848
Electrical Wall Plate

010113848
SPA-42: RNCC: 3 | RNVC: 2
SPA-42: RNCC: 3 | RNVC: 9

21 Oct 1975

5975-01-012-2591
Electrical Components Tie Down Strap

010122591
MS17821-2-0: RNCC: 2 | RNVC: 2

9 Nov 1975

5975-01-553-7309
Electrical Conduit Adapter

015537309
31-300-20400: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-01-553-0568
Electrical-Electronic Equipment Chassis

015530568
31-300-3433: RNCC: 3 | RNVC: 2

3 Jul 2007

5975-01-362-8913
Electrical-Electronic Equipment Chassis

013628913
19D901881G1: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-600-5724
Electrical-Electronic Equipment Panel

016005724
652-HAE-SAASM-100: RNCC: 3 | RNVC: 2

8 Dec 2011

5975-01-599-9069
Electrical Equipment Drawer

015999069
K10051119-1: RNCC: 3 | RNVC: 2

27 Oct 2011

5975-01-599-8157
Electronic Equipment Mounting Tray

015998157
M163027-101: RNCC: 3 | RNVC: 2
M163027-101: RNCC: 3 | RNVC: 9

25 Oct 2011

5975-01-600-4626
Electrical-Electronic Equipment Chassis

016004626
IPC-610BP-00HE: RNCC: 3 | RNVC: 2

1 Dec 2011

5975-01-354-9343
Electrical Equipment Mounting Base

013549343
3315765: RNCC: 3 | RNVC: 2
3315765: RNCC: 3 | RNVC: 9

7 Mar 1992

5975-01-572-1629
Electronic Junction Rack

015721629
RR1061-5: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-571-9473
Electrical-Electronic Equipment Chassis

015719473
40300516-001: RNCC: 3 | RNVC: 2

21 Feb 2009

5975-01-572-1694
Electrical Chassis

015721694
10-215122-1: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-00-239-9784
Dust Cap

002399784
C3E: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-362-4742
Electrical-Electronic Equipment Panel

013624742
921101080-009: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-362-4737
Electrical-Electronic Equipment Panel

013624737
924000030-049: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-362-4739
Electrical-Electronic Equipment Panel

013624739
924000060-029: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-362-3182
Electrical Components Tie Down Strap

013623182
TY51M-HT: RNCC: 3 | RNVC: 2

4 Aug 1992

5975-01-362-8774
Electrical-Electronic Equipment Panel

013628774
921101060-009: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-599-1826
Eprom

015991826
74434B64K2VERTBE: RNCC: 3 | RNVC: 1

14 Sep 2011

5975-01-599-0734
Electrical Equipment Rack

015990734
POLY115C RAILS: RNCC: 3 | RNVC: 2

13 Sep 2011

5975-01-297-7204
Junction Box Assembly

012977204
160131-01: RNCC: 3 | RNVC: 9
CRJB: RNCC: 5 | RNVC: 9

6 Apr 1989

5975-01-297-9689
Electrical-Electronic Equipment Panel

012979689
5597903-19: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-572-1625
Electronic Junction Rack

015721625
RR1061-3: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-570-9931
Electrical-Electronic Equipment Panel

015709931
10115716-102: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-572-0399
Electrical Equipment Mounting Base

015720399
542-6069-002: RNCC: 3 | RNVC: 2

25 Feb 2009

5975-01-570-8797
Electrical-Electronic Equipment Panel

015708797
68T060393-2003: RNCC: 3 | RNVC: 2

15 Jan 2009

5975-01-551-3660
Electrical Equipment Rack

015513660
6150047-100: RNCC: 3 | RNVC: 2

15 May 2007

5975-01-550-3047
Electrical Box Connector

015503047
1594ASGY: RNCC: 3 | RNVC: 2

16 Apr 2007

5975-01-597-8487
Electrical Cable Protector

015978487
S1023654: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-597-1624
Electrical-Electronic Equipment Panel

015971624
60063166: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-598-3312
Guide Rail

015983312
7250264: RNCC: 3 | RNVC: 2

21 Jul 2011

5975-01-351-9650
Junction Box

013519650
2712 104 000: RNCC: 3 | RNVC: 2

17 Jan 1992

5975-01-352-0202
Electrical Components Tie Down Strap

013520202
908-2518-1: RNCC: 3 | RNVC: 2
908-2518-1: RNCC: 5 | RNVC: 9

18 Jan 1992

5975-01-353-0789
Electrical Components Tie Down Strap

013530789
1106124-01: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-00-238-2336
Electrical Cable Nipple

002382336
49-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-550-0771
Electrical Equipment Rack

015500771
779382-01: RNCC: 3 | RNVC: 2
NI PXI-1036: RNCC: 5 | RNVC: 2

6 Apr 2007

5975-01-550-0899
Electrical-Electronic Equipment Panel

015500899
204446-1: RNCC: 3 | RNVC: 2

9 Apr 2007

5975-01-358-6418
Cable Hanger

013586418
400870: RNCC: 3 | RNVC: 2
6049-2017: RNCC: 7 | RNVC: 2

16 May 1992

5975-01-359-9614
Electrical-Electronic Equipment Chassis

013599614
687-2641-002: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-01-359-6056
Electrical Box Connector

013596056
7208952P003: RNCC: 3 | RNVC: 2

10 Jun 1992

5975-01-596-8874
Electrical Box Adapter Flange

015968874
1545233-2: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-350-4649
Electrical Equipment Mounting Base

013504649
404A-25-S-T/DPXBC/C-D: RNCC: 3 | RNVC: 2

17 Dec 1991

5975-01-350-6556
Electrical-Electronic Equipment Chassis

013506556
005643-001: RNCC: 3 | RNVC: 2

19 Dec 1991

5975-01-350-4950
Electrical Grounding Plate

013504950
279-337: RNCC: 3 | RNVC: 9

17 Dec 1991

5975-01-328-5920
Junction Can

013285920
151468/18: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-00-231-0436
Cable Hanger Assy

002310436
369A6401-3: RNCC: 3 | RNVC: 2
369A6401-3: RNCC: 5 | RNVC: 9

14 Oct 1970

5975-00-247-5005
Electrical Conduit Ferrule

002475005
S1110752-8: RNCC: 3 | RNVC: 2
11-3B8: RNCC: 5 | RNVC: 2
S1110752-8: RNCC: 5 | RNVC: 9
11-3B8: RNCC: 5 | RNVC: 9
019-1561-260: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-548-8705
Cable Marker Sleeve

015488705
7381985-001: RNCC: 3 | RNVC: 2
TMS-SCE1/8-2.0-S3-9: RNCC: 5 | RNVC: 2

6 Mar 2007

5975-01-548-8107
Flexible Metal Conduit Assembly

015488107
5493230-013: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-01-546-4526
Electrical-Electronic Equipment Chassis

015464526
ECIMLN-MSW5049: RNCC: 3 | RNVC: 2

15 Dec 2006

5975-01-549-4450
Electrical-Electronic Equipment Chassis

015494450
R548731-02: RNCC: 3 | RNVC: 2

20 Mar 2007

5975-01-549-3829
Cable Hanger

015493829
AA-38S: RNCC: 3 | RNVC: 2

19 Mar 2007

5975-01-358-9939
Electrical Conduit Adapter

013589939
G9692A18B: RNCC: 3 | RNVC: 2
G9692A18B: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-358-3344
Electrical-Electronic Equipment Chassis

013583344
6000207: RNCC: 3 | RNVC: 2

13 May 1992

5975-01-358-5119
Electrical Components Tie Down Strap

013585119
TY28MFR: RNCC: 3 | RNVC: 2
TY28MFR: RNCC: 5 | RNVC: 2
5730163: RNCC: 5 | RNVC: 2
TY28MFR: RNCC: 5 | RNVC: 9

14 May 1992

5975-01-358-9935
Electrical Conduit Adapter

013589935
710AA002B1216: RNCC: 3 | RNVC: 2
710AA002B12-16: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-358-3202
Insulator Bracket

013583202
20800-16: RNCC: 3 | RNVC: 2

13 May 1992

5975-01-595-0172
Electrical Equipment Rack

015950172
148624-5: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-259-7108
Electrical Components Tie Down Strap

012597108
WIT-18R: RNCC: 3 | RNVC: 9
A3-093967: RNCC: 5 | RNVC: 2

21 Jul 1987

5975-01-259-5231
Blade

012595231
8000-417R: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-00-995-9110
Electrical-Electronic Equipment Chassis

009959110
110715: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-356-7865
Electrical Components Tie Down Strap

013567865
PLC1.5I-S8-M30: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-594-8447
Rigid Nonmetallic Conduit

015948447
SR10380006-3: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-3183
Electrical Components Tie Down Strap

015943183
61000603: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-8346
Conduit Outlet Cover

015948346
2527556: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-593-4387
Conduit Connector

015934387
APPST90100: RNCC: 3 | RNVC: 9
52259-000: RNCC: 5 | RNVC: 2

7 Apr 2011

5975-01-347-7889
Interconnecting Box

013477889
978442-103: RNCC: 3 | RNVC: 2

29 Oct 1991

5975-01-348-9513
Interconnecting Box

013489513
8225-2: RNCC: 3 | RNVC: 2

19 Nov 1991

5975-01-495-8430
Electrical-Electronic Equipment Chassis

014958430
546-6905-002: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-495-5911
Blank Panel

014955911
0003046-2: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-01-498-2781
Electrical-Electronic Equipment Chassis

014982781
WS-6509-2500AC: RNCC: 3 | RNVC: 2

20 Jun 2002

5975-01-498-7920
Electrical-Electronic Equipment Chassis

014987920
1505892U01: RNCC: 3 | RNVC: 9
1505892U01: RNCC: 5 | RNVC: 9

1 Jul 2002

5975-01-499-1556
Electrical Components Tie Down Strap

014991556
10249-3105-03: RNCC: 3 | RNVC: 2

15 Jul 2002

5975-01-496-9318
Electrical-Electronic Equipment Chassis

014969318
775-2842-001: RNCC: 3 | RNVC: 2

1 May 2002

5975-00-240-2676
Electrical Box Connector

002402676
AN3060-3: RNCC: 2 | RNVC: 2
3060-3: RNCC: 5 | RNVC: 1
22-0187: RNCC: 5 | RNVC: 1
22-10-3: RNCC: 5 | RNVC: 1
22-10-3: RNCC: 5 | RNVC: 9
22-0187: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-546-4537
Rigid Metal Conduit

015464537
759-835: RNCC: 3 | RNVC: 2

15 Dec 2006

5975-01-546-8357
Electrical Equipment Cabinet

015468357
L524 000 342: RNCC: 3 | RNVC: 2

4 Jan 2007

5975-01-592-6975
Conduit Outlet Cover

015926975
M095058: RNCC: 3 | RNVC: 2
M095058: RNCC: 3 | RNVC: 9

16 Mar 2011

5975-01-592-7283
Junction Box

015927283
A604CHQR: RNCC: 3 | RNVC: 2
HOFA604CHQR: RNCC: 5 | RNVC: 9

16 Mar 2011

5975-01-257-6416
Junction Box Assembly

012576416
13282644: RNCC: 3 | RNVC: 2

22 Jun 1987

5975-01-258-0619
Electrical Conductor Bushing

012580619
DC-68-2-2: RNCC: 3 | RNVC: 2
DC68-2-2: RNCC: 5 | RNVC: 2

27 Jun 1987

5975-01-347-0361
Electrical Tie Down Mounting Base

013470361
ABMM-AC10: RNCC: 3 | RNVC: 2

13 Oct 1991

5975-01-347-3259
Electrical-Electronic Equipment Chassis

013473259
8040003363-02: RNCC: 3 | RNVC: 9

19 Oct 1991

5975-01-418-8097
Electrical-Electronic Equipment Chassis

014188097
SA-H112: RNCC: 3 | RNVC: 9
SA-H112: RNCC: C | RNVC: 1

6 Sep 1995

5975-01-419-2048
Electrical-Electronic Equipment Chassis

014192048
C200H-BC031-V2: RNCC: 3 | RNVC: 2

15 Sep 1995

5975-01-419-0922
Electrical-Electronic Equipment Chassis

014190922
2594037: RNCC: 3 | RNVC: 2

13 Sep 1995

5975-01-256-5698
Electrical-Electronic Equipment Panel

012565698
5188870-3: RNCC: 3 | RNVC: 2

6 Jun 1987

5975-01-489-5758
Electrical Equipment Mounting Base

014895758
200661: RNCC: 3 | RNVC: 2

17 Sep 2001

5975-01-489-0868
Electrical Equipment Rack

014890868
5HK01352-109: RNCC: 3 | RNVC: 2

11 Sep 2001

5975-01-417-4733
Electrical Tie Down Mounting Base

014174733
213-084-601: RNCC: 3 | RNVC: 2

8 Aug 1995

5975-01-417-3392
Sectiona Terminal Junction Block

014173392
RC11090-10P: RNCC: 3 | RNVC: 2
9D0090-10P: RNCC: 5 | RNVC: 2

5 Aug 1995

5975-01-417-8043
Electrical Cable Protector

014178043
9040461-21: RNCC: 3 | RNVC: 2

15 Aug 1995

5975-01-343-4985
Flexible Metal Conduit Assembly

013434985
NAF1150-6A74: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-344-1634
Electrical-Electronic Equipment Chassis

013441634
10278-0603: RNCC: 3 | RNVC: 2

24 Aug 1991

5975-01-344-7947
Cable Hanger

013447947
TAS100M: RNCC: 3 | RNVC: 2

6 Sep 1991

5975-01-345-7904
Electrical Conduit Adapter

013457904
C200AC1012AA/18: RNCC: 3 | RNVC: 2
PS183415-16: RNCC: 5 | RNVC: 2

24 Sep 1991

5975-01-345-7916
Electrical Conduit Adapter

013457916
C004AC1009AA/18: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-329-0290
Electrical-Electronic Equipment Panel

013290290
208150-100: RNCC: 3 | RNVC: 2

11 Nov 1990

5975-01-329-4647
Safety Shorting Probe

013294647
19250006: RNCC: 3 | RNVC: 2

16 Nov 1990

5975-01-264-5425
Electrical Equipment Cabinet

012645425
0N393084: RNCC: 3 | RNVC: 2
CY-8544/GSQ-234: RNCC: 5 | RNVC: 2

2 Oct 1987

5975-01-351-5043
Electrical Grounding Plate

013515043
281-316: RNCC: 3 | RNVC: 9
281-316: RNCC: 5 | RNVC: 2

9 Jan 1992

5975-01-352-5294
Cable Marker Sleeve

013525294
GENCOTE125C 1/2IN: RNCC: 3 | RNVC: 2

27 Jan 1992

5975-01-415-0068
Chain Assembly

014150068
3303549-1: RNCC: 3 | RNVC: 2

19 Jun 1995

5975-01-416-1229
Electrical Equipment Rack

014161229
6000560-001: RNCC: 3 | RNVC: 2

13 Jul 1995

5975-01-565-8687
Tagging Gun

015658687
10651-0: RNCC: 3 | RNVC: 2
10651-0MKIII: RNCC: 5 | RNVC: 2

11 Aug 2008

5975-01-326-6202
Electrical Cable Protector

013266202
3491230: RNCC: 3 | RNVC: 2

27 Sep 1990

5975-00-119-9182
Control Assembly Cover

001199182
0N050129: RNCC: 3 | RNVC: 2

18 Oct 1968

5975-01-351-1127
Electrical-Electronic Equipment Panel

013511127
3661892-1: RNCC: 3 | RNVC: 2

31 Dec 1991

5975-01-563-4030
Electrical Entrance Cap

015634030
RF175-4-D3: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-4187
Electrical Bushing

015634187
RL69-24: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-4196
Electrical Bushing

015634196
RW309-6: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-562-2825
Stay Plate

015622825
M24705-1SC2: RNCC: 4 | RNVC: 1
301-7006850ITEM128: RNCC: 5 | RNVC: 1

3 Apr 2008

5975-01-562-9468
Cable Hanger

015629468
1C7218G01: RNCC: 3 | RNVC: 2

26 Apr 2008

5975-01-389-7274
Terminal Board

013897274
RC11090-14: RNCC: 3 | RNVC: 2
9D0090-14: RNCC: 5 | RNVC: 2
RC11090: RNCC: D | RNVC: 9

30 Apr 1994

5975-01-390-1762
Electrical-Electronic Equipment Chassis

013901762
687-4417-002: RNCC: 3 | RNVC: 2

13 May 1994

5975-00-100-8670
Electrical Conduit Bushing

001008670
FED-STD 156: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 4 | RNVC: 1

3 Jun 1968

5975-01-045-0431
Electrical Components Tie Down Strap

010450431
MS3367-2-4: RNCC: 2 | RNVC: 2
SAE-AS23190: RNCC: 5 | RNVC: 1
30F849: RNCC: 5 | RNVC: 2
MIL-S-23190: RNCC: 5 | RNVC: 9

25 Jul 1977

5975-00-966-7105
Electrical Equipment Drawer

009667105
0N008554: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-266-2858
Flexible Nonmetallic Conduit

012662858
162989-025: RNCC: 3 | RNVC: 2

23 Oct 1987

5975-01-348-0627
Electrical Conduit Ferrule

013480627
10670: RNCC: 3 | RNVC: 2

4 Nov 1991

5975-01-348-3477
Electrical Equipment Mounting Base

013483477
619-6823-002: RNCC: 3 | RNVC: 2
MT-5240/AYC-501: RNCC: 3 | RNVC: 2

8 Nov 1991

5975-01-413-5239
Electrical-Electronic Equipment Chassis

014135239
CTJ-3A-09: RNCC: 3 | RNVC: 2

16 May 1995

5975-01-412-7405
Electrical Cable Protector

014127405
5495378: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-01-413-6677
Electrical Equipment Rack

014136677
5062-6979: RNCC: 3 | RNVC: 2

18 May 1995

5975-01-413-1741
Electrical Conduit Elbow

014131741
UA9ADB: RNCC: 3 | RNVC: 9
00034481226987: RNCC: 5 | RNVC: 9

7 May 1995

5975-01-560-7834
Cable Terminal Chamber

015607834
QTPET025-4N4B-MOXT-DND: RNCC: 3 | RNVC: 2

12 Feb 2008

5975-01-561-3236
Blank Panel

015613236
010-10492-00: RNCC: 3 | RNVC: 2

29 Feb 2008

5975-01-562-1775
Junction Box Assembly

015621775
70902-21082-041: RNCC: 3 | RNVC: 2

1 Apr 2008

5975-01-562-2181
Electrical-Electronic Equipment Chassis

015622181
371-0703: RNCC: 3 | RNVC: 2

2 Apr 2008

Load More Results