What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 158 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 158 of 176

5975-01-062-7718
Electrical-Electronic Equipment Chassis

010627718
790-0877-002: RNCC: 3 | RNVC: 2

22 Jul 1978

5975-01-264-4932
Electrical-Electronic Equipment Chassis

012644932
897E429G5: RNCC: 3 | RNVC: 2

2 Oct 1987

5975-01-607-3859
Electrical Equipment Cabinet

016073859
S8-CHASSIS-POE4: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-608-1192
Electrical-Electronic Equipment Panel

016081192
D5027-4: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-608-1406
Pm Rack Chassis

016081406
2-42930-8917: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-608-3410
Electrical-Electronic Equipment Chassis

016083410
712575-61: RNCC: 3 | RNVC: 2

25 Jun 2012

5975-01-020-4275
Stiffener

010204275
7022569-00: RNCC: 3 | RNVC: 2

30 Apr 1976

5975-01-271-6475
Cable Strain Relief Bushing

012716475
780271: RNCC: 3 | RNVC: 2

29 Jan 1988

5975-01-270-9072
Electrical-Electronic Equipment Chassis

012709072
2085995-2: RNCC: 3 | RNVC: 2

15 Jan 1988

5975-01-271-7490
Blank Panel

012717490
600-B22370-004: RNCC: 3 | RNVC: 2
B22370-4: RNCC: 5 | RNVC: 2

29 Jan 1988

5975-01-606-2392
Electrical Components Tie Down Strap

016062392
3930369-9: RNCC: 3 | RNVC: 2
3930369-9: RNCC: 3 | RNVC: 9

14 May 2012

5975-01-607-6047
Electrical Components Tie Down Strap

016076047
105-0214: RNCC: 3 | RNVC: 9

8 Jun 2012

5975-01-057-6134
Cable Marker Sleeve

010576134
ST650713A19P41: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

16 Mar 1978

5975-01-270-0393
Electrical Tie Down Mounting Base

012700393
4654-0: RNCC: 3 | RNVC: 2
4654-0: RNCC: 3 | RNVC: 9

24 Dec 1987

5975-01-270-0394
Electrical Tie Down Mounting Base

012700394
4654-2: RNCC: 3 | RNVC: 2
4654-2: RNCC: 3 | RNVC: 9

24 Dec 1987

5975-01-056-7570
Cable Marker Sleeve

010567570
ST650713A19P49: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

28 Feb 1978

5975-01-057-8386
Electrical Access Cover

010578386
ZT112-200BCDT-5DD: RNCC: 3 | RNVC: 2

20 Mar 1978

5975-01-254-5466
Electrical Equipment Cabinet

012545466
0N333257-1(60HZ): RNCC: 3 | RNVC: 2
CY-8320(V)1/FYQ-107(V): RNCC: 5 | RNVC: 2

7 May 1987

5975-01-604-6076
Electrical Equipment Mounting Base

016046076
118986-001: RNCC: 3 | RNVC: 2

10 Apr 2012

5975-01-274-9555
Electrical-Electronic Equipment Chassis

012749555
7597161G1: RNCC: 3 | RNVC: 9
7816302G1: RNCC: 5 | RNVC: 9

16 Mar 1988

5975-01-051-1857
Electrical Equipment Mounting Base

010511857
12252451: RNCC: 3 | RNVC: 2
5975010511857: RNCC: 6 | RNVC: 9

25 Nov 1977

5975-01-601-6636
Electrical Equipment Rack

016016636
SUN RACK II: RNCC: 3 | RNVC: 9
594-5593-02: RNCC: 5 | RNVC: 9

19 Jan 2012

5975-01-058-8535
Cable Marker Sleeve

010588535
ST650713A19P34: RNCC: 3 | RNVC: 2
210: RNCC: 5 | RNVC: 9

2 Apr 1978

5975-01-388-8238
Electrical Grounding Plate

013888238
21033: RNCC: 3 | RNVC: 2

8 Apr 1994

5975-01-609-4520
Electrical Equipment Rack

016094520
AF012A: RNCC: 3 | RNVC: 9

26 Jul 2012

5975-01-277-2698
Electrical Equipment Rack

012772698
85831-201-1: RNCC: 3 | RNVC: 1

20 Apr 1988

5975-01-286-6963
Electrical-Electronic Equipment Chassis

012866963
059-001318-001: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-600-8418
Electrical Equipment Mounting Base

016008418
16820: RNCC: 3 | RNVC: 2

21 Dec 2011

5975-01-601-2051
Stuffing Tube

016012051
2007956: RNCC: 3 | RNVC: 2
2007956: RNCC: 5 | RNVC: 2
CV174150: RNCC: 5 | RNVC: 2

12 Jan 2012

5975-01-601-4708
Mids 1U Rackmountab

016014708
1095983: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-4377
Electrical Equipment Shelf

016014377
06-01896506-IGP: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-5861
Electrical-Electronic Equipment Chassis

016015861
CC1600-11L-GB/IE: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-275-2682
Metallic Raceway

012752682
CC5-M-1: RNCC: 3 | RNVC: 2

19 Mar 1988

5975-01-276-2895
Electrical Equipment Drawer

012762895
750240-1: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-283-8830
Switch Box Case

012838830
62114-1: RNCC: 3 | RNVC: 2

14 Aug 1988

5975-01-284-8669
Electrical-Electronic Equipment Chassis

012848669
03-118299-01: RNCC: 3 | RNVC: 2
03-118299-01: RNCC: 5 | RNVC: 9

2 Sep 1988

5975-01-285-8635
Electrical-Electronic Equipment Panel

012858635
7012918-902: RNCC: 3 | RNVC: 2

22 Sep 1988

5975-01-534-5081
Electrical-Electronic Equipment Chassis

015345081
11472312: RNCC: 3 | RNVC: 2

25 Oct 2005

5975-01-534-8382
Electrical Grounding Plate

015348382
152980-1: RNCC: 3 | RNVC: 2

3 Nov 2005

5975-01-534-2707
Junction Box

015342707
2036-1407-09: RNCC: 3 | RNVC: 2
2036-1407-19: RNCC: 3 | RNVC: 2

14 Oct 2005

5975-01-534-3141
Electrical Components Tie Down Strap

015343141
SST8H-D30: RNCC: 3 | RNVC: 2

17 Oct 2005

5975-01-534-8067
Electrical-Electronic Equipment Chassis

015348067
11440387: RNCC: 3 | RNVC: 2

2 Nov 2005

5975-01-534-7598
Interconnecting Box Cover

015347598
851835: RNCC: 3 | RNVC: 2
851835: RNCC: 5 | RNVC: 2

1 Nov 2005

5975-01-535-3976
Cable Marker Sleeve

015353976
M235A774-153: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-00-939-9013
Junction Box Cover

009399013
MT20161-050-010: RNCC: 3 | RNVC: 2

30 Nov 1965

5975-01-386-4257
Electrical Equipment Mounting Base

013864257
87-30481-0010: RNCC: 3 | RNVC: 2

4 Feb 1994

5975-00-824-4354
Cable End Sealing K

008244354
402-2H: RNCC: 3 | RNVC: 9

11 Aug 1967

5975-00-824-4353
Cable End Sealing K

008244353
449-2H: RNCC: 3 | RNVC: 9

11 Aug 1967

5975-01-532-9659
Electrical Equipment Shelf

015329659
JRRS1928: RNCC: 3 | RNVC: 2

25 Aug 2005

5975-01-530-8118
Junction Box Assembly

015308118
16103671-011: RNCC: 3 | RNVC: 2

13 Jun 2005

5975-01-530-3691
Flexible Metal Conduit Assembly

015303691
287N6202-18: RNCC: 3 | RNVC: 2

24 May 2005

5975-01-105-0792
Pie Cabinet

011050792
57977-40150: RNCC: 3 | RNVC: 2

17 Dec 1980

5975-01-566-7156
Electrical Equipment Mounting Base

015667156
612-007-150: RNCC: 3 | RNVC: 2

8 Sep 2008

5975-01-569-4946
Electrical Bushing

015694946
RW309-20: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-572-1628
Electronic Junction Rack

015721628
RR1061-18: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-572-0909
Sleeve Removal Tool

015720909
T60084: RNCC: 3 | RNVC: 2

27 Feb 2009

5975-01-527-9035
Electrical-Electronic Equipment Chassis

015279035
3642575-5: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-528-3961
Electrical-Electronic Equipment Chassis

015283961
TRN7479A: RNCC: 3 | RNVC: 2
TRN7479: RNCC: 5 | RNVC: 9

11 Mar 2005

5975-01-527-7086
Electrical Equipment Rack Base

015277086
965703-103: RNCC: 3 | RNVC: 2

14 Feb 2005

5975-01-381-0513
Electrical Equipment Drawer

013810513
8556B: RNCC: 3 | RNVC: 2

5 Oct 1993

5975-01-691-8187
Electrical-Electronic Equipment Chassis

016918187
PS400-CHAS-5-001: RNCC: 3 | RNVC: 2

30 Oct 2020

5975-01-693-3449
Electrical Equipment Cabinet

016933449
ASR0404021: RNCC: 3 | RNVC: 2

5 Feb 2021

5975-01-694-2036
Electrical Box Connector

016942036
1088135: RNCC: 3 | RNVC: 2

23 Mar 2021

5975-01-695-6813
Electrical Cable Nipple

016956813
AA59178-2E: RNCC: 2 | RNVC: 2

17 Jun 2021

5975-01-696-8886
Electrical-Electronic Equipment Panel

016968886
3369752-3: RNCC: 3 | RNVC: 2

23 Aug 2021

5975-00-854-2653
Electrical-Electronic Equipment Chassis

008542653
103815: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-564-5939
Electrical Equipment Mounting Base

015645939
7215-0021-1: RNCC: 3 | RNVC: 9

20 Jun 2008

5975-01-564-1060
Electrical Standardized Components Case

015641060
1610 CASE: RNCC: 3 | RNVC: 2
1610 PROTECTOR: RNCC: 3 | RNVC: 2
1614 - WITH PADDED DIVIDERS: RNCC: 3 | RNVC: 2
10176709: RNCC: 6 | RNVC: 9

4 Jun 2008

5975-01-564-6079
Stay Plate

015646079
AA0130SS: RNCC: 3 | RNVC: 9
301-7006850ITEM128: RNCC: 5 | RNVC: 1

23 Jun 2008

5975-01-235-0625
Electrical Equipment Rack

012350625
57977-40160-2: RNCC: 3 | RNVC: 2

24 Jun 1986

5975-01-233-7165
Electrical Equipment Cabinet

012337165
CY-2518D/WLR-1: RNCC: 3 | RNVC: 2
522-1558-005: RNCC: 5 | RNVC: 9

1 Jun 1986

5975-01-234-2947
Panel Back

012342947
2353081-2: RNCC: 3 | RNVC: 2

13 Jun 1986

5975-01-526-0138
Flexible Nonmetallic Conduit

015260138
75A355401-2005: RNCC: 3 | RNVC: 2

3 Dec 2004

5975-01-527-8981
Electrical Equipment Cabinet

015278981
504149C: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-134-8374
Electrical Components Tie Down Strap

011348374
PLTIM51CP: RNCC: 3 | RNVC: 2

10 Jul 1982

5975-01-141-6841
Cable Marker Sleeve

011416841
TMS-SCE-3/8-2.0-S1-9: RNCC: 3 | RNVC: 1
215511T92: RNCC: 5 | RNVC: 2
RNF-100-3/8X1 1/4 WHITE: RNCC: 5 | RNVC: 9
215511T92: RNCC: 7 | RNVC: 2

3 Nov 1982

5975-01-132-6174
Safety Sign Book

011326174
PSSB-1: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-01-380-4352
Cable Hanger

013804352
2910093: RNCC: 3 | RNVC: 2

18 Sep 1993

5975-01-688-2437
Blank Panel

016882437
8664856-1: RNCC: 3 | RNVC: 2

8 May 2020

5975-01-622-7436
Electrical Conduit Coupling

016227436
62030044100: RNCC: 3 | RNVC: 9

22 Oct 2013

5975-01-688-8938
Electrical Equipment Rack

016888938
40010180-000: RNCC: 3 | RNVC: 2

29 May 2020

5975-01-689-3317
Electrical-Electronic Equipment Panel

016893317
20-102-30: RNCC: 3 | RNVC: 2

16 Jun 2020

5975-01-690-9216
Mounting Plate

016909216
K10055538-501: RNCC: 3 | RNVC: 2

10 Sep 2020

5975-01-232-9227
Electrical-Electronic Equipment Chassis

012329227
797-0879-007: RNCC: 3 | RNVC: 2

22 May 1986

5975-01-231-5040
Blank Panel

012315040
30023-1102-01: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-525-8274
Strain Electrical Conductor Clamp

015258274
63B41451: RNCC: 3 | RNVC: 2

24 Nov 2004

5975-01-379-3694
Cable Terminal Chamber

013793694
WRSS120/500-12: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-411-4728
Electrical Equipment Rack

014114728
806742-14: RNCC: 3 | RNVC: 2

24 Mar 1995

5975-01-608-9558
Flexible Nonmetallic Conduit

016089558
623-4929-005: RNCC: 3 | RNVC: 9

13 Jul 2012

5975-01-593-2856
Sdlp

015932856
ISD-3218: RNCC: 3 | RNVC: 1

6 Apr 2011

5975-01-599-9817
Electrical Equipment Rack

015999817
A3021-000386: RNCC: 1 | RNVC: 2
RLCD19-8U: RNCC: 3 | RNVC: 2
80-0916-001: RNCC: 5 | RNVC: 2
A3021-000386-2: RNCC: 5 | RNVC: 2
80-0649: RNCC: 5 | RNVC: 2
RLCD18: RNCC: 5 | RNVC: 9

1 Nov 2011

5975-01-572-2961
Electrical-Electronic Equipment Chassis

015722961
IPC-610BP-30ZFCE: RNCC: 3 | RNVC: 2

5 Mar 2009

5975-01-651-9463
Electrical-Electronic Equipment Chassis

016519463
PE6R4: RNCC: 3 | RNVC: 2

4 Feb 2016

5975-01-653-3959
Electrical Equipment Cabinet

016533959
A48H36DLP3PT: RNCC: 3 | RNVC: 2

22 Mar 2016

5975-01-554-9469
Electrical-Electronic Equipment Chassis

015549469
11466109: RNCC: 3 | RNVC: 2

23 Aug 2007

5975-01-555-3249
Electrical Equipment Mounting Base

015553249
184882-2: RNCC: 3 | RNVC: 2
184882-2: RNCC: 5 | RNVC: 2

31 Aug 2007

5975-01-522-3762
Electrical-Electronic Equipment Chassis

015223762
KAM/SYS/13U: RNCC: 3 | RNVC: 2

28 Jul 2004

5975-01-523-2107
Electronic Equipment Mounting Tray

015232107
5020808-0000: RNCC: 3 | RNVC: 9
5020808-0000: RNCC: C | RNVC: 1

24 Aug 2004

5975-01-563-1541
Electrical Conductor Bushing

015631541
18220-10: RNCC: 3 | RNVC: 2

2 May 2008

5975-01-409-0564
Electrical-Electronic Equipment Chassis

014090564
407040/407044: RNCC: 3 | RNVC: 2

3 Mar 1995

5975-01-647-1636
Electrical Cable Nipple

016471636
048-001: RNCC: 3 | RNVC: 2

13 Aug 2015

5975-01-649-7276
Electronic Equipment Mounting Tray

016497276
10920105: RNCC: 3 | RNVC: 2

9 Nov 2015

5975-01-649-9803
Electrical-Electronic Equipment Panel

016499803
1663781-1: RNCC: 3 | RNVC: 2

17 Nov 2015

5975-01-520-7580
Blank Panel

015207580
37761-2081-101: RNCC: 3 | RNVC: 2

25 May 2004

5975-01-521-3622
Electrical-Electronic Equipment Chassis

015213622
G000809-18CL: RNCC: 3 | RNVC: 2

18 Jun 2004

5975-01-522-4991
Cable Marker Sleeve

015224991
SS7074-931: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-522-4989
Cable Marker Sleeve

015224989
SS7074-3798: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-01-519-0459
Electrical Conduit Coupling

015190459
H316A003-103: RNCC: 3 | RNVC: 2

2 Apr 2004

5975-01-570-9925
Junction Box Assembly

015709925
10116955-101: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-548-8098
Flexible Metal Conduit Assembly

015488098
5493230-017: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-01-407-4076
Electrical Equipment Rack

014074076
AS-H819-209: RNCC: 3 | RNVC: 9

27 Jan 1995

5975-01-408-3744
Blank Panel

014083744
964136-127: RNCC: 3 | RNVC: 2

15 Feb 1995

5975-01-641-1532
Electrical Equipment Cabinet

016411532
193D1536G2: RNCC: 3 | RNVC: 2

12 Jan 2015

5975-01-503-8556
Electronic Equipment Mounting Tray

015038556
6107-100-0500: RNCC: 3 | RNVC: 2
ASC1580516: RNCC: 5 | RNVC: 9
DE100I-CSW160/B: RNCC: 5 | RNVC: 9

9 Jan 2003

5975-01-505-0748
Electrical-Electronic Equipment Panel

015050748
W82ME0006: RNCC: 3 | RNVC: 2

21 Feb 2003

5975-01-625-1239
Stuffing Tube

016251239
8611008R: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-624-4719
Electrical-Electronic Equipment Chassis

016244719
455YP-A9: RNCC: 3 | RNVC: 2

3 Jan 2014

5975-01-625-1783
Stuffing Tube

016251783
8611012A: RNCC: 3 | RNVC: 2

28 Jan 2014

5975-01-623-8199
Electrical Cable Protector

016238199
ER00A01001121: RNCC: 3 | RNVC: 2
R 100 EMC AISI 316: RNCC: 5 | RNVC: 2

4 Dec 2013

5975-01-625-1761
Stuffing Tube

016251761
8615008A: RNCC: 3 | RNVC: 2

28 Jan 2014

5975-01-625-0824
Electronic Equipment Mounting Tray

016250824
68A870386-1005: RNCC: 3 | RNVC: 2

23 Jan 2014

5975-01-569-5866
Cooling Tray

015695866
1027984: RNCC: 3 | RNVC: 2

4 Dec 2008

5975-01-572-1630
Electronic Junction Rack

015721630
RR1061-6: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-648-9647
Electrical Plate

016489647
25-8NF6095-1: RNCC: 3 | RNVC: 2
25-8NF6095-1: RNCC: 3 | RNVC: 9

13 Oct 2015

5975-01-667-3354
Electrical Equipment Mounting Base

016673354
39920-40404-1: RNCC: 3 | RNVC: 2

12 Oct 2017

5975-01-670-5497
Electrical Cable Nipple

016705497
328854: RNCC: 3 | RNVC: 2

27 Feb 2018

5975-01-630-4788
Electrical Equipment Rack

016304788
60-190-20: RNCC: 3 | RNVC: 2

6 Aug 2014

5975-01-633-2923
Electrical-Electronic Equipment Chassis

016332923
OT-CC-6: RNCC: 3 | RNVC: 2

17 Nov 2014

5975-01-497-1065
Electrical Equipment Drawer

014971065
97008A4200: RNCC: 3 | RNVC: 2

9 May 2002

5975-01-498-5139
Electrical Tie Down Mounting Base

014985139
CB3019A5N: RNCC: 3 | RNVC: 2

28 Jun 2002

5975-01-623-3495
Electrical Standardized Components Case

016233495
MA-0055-00: RNCC: 3 | RNVC: 2
MA-0055-00: RNCC: 3 | RNVC: 9
484-0000-242: RNCC: 5 | RNVC: 2

8 Nov 2013

5975-01-623-0398
Electrical Equipment Rack

016230398
AF022A: RNCC: 3 | RNVC: 2

30 Oct 2013

5975-01-623-0838
Electrical Equipment Cabinet

016230838
H416023-9: RNCC: 3 | RNVC: 2

31 Oct 2013

5975-01-623-4035
Electrical Equipment Rack

016234035
650926-B21: RNCC: 3 | RNVC: 2

13 Nov 2013

5975-01-624-3517
Electrical-Electronic Equipment Chassis

016243517
ACP-2000EBP-00XE: RNCC: 3 | RNVC: 2

26 Dec 2013

5975-01-623-5150
Guide Rail

016235150
RK-LMG-26DR: RNCC: 3 | RNVC: 2

18 Nov 2013

5975-01-623-8901
Electrical-Electronic Equipment Chassis

016238901
781447-01: RNCC: 3 | RNVC: 2

6 Dec 2013

5975-01-643-5395
Electrical Cable Nipple

016435395
455N8V02: RNCC: 3 | RNVC: 2
22066597: RNCC: 5 | RNVC: 2
1720741: RNCC: 5 | RNVC: 2
7422066597: RNCC: 5 | RNVC: 2
22066597: RNCC: 5 | RNVC: 9

6 Apr 2015

5975-01-648-7671
Electronic Equipment Mounting Tray

016487671
284A7700-16: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-645-2641
Eprom

016452641
74434B65VER04: RNCC: 3 | RNVC: 1

9 Jun 2015

5975-01-648-9830
Junction Box Extension

016489830
284A3203-29: RNCC: 3 | RNVC: 2

14 Oct 2015

5975-01-647-4931
Blank Panel

016474931
295A306-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-670-6205
Ground Rod

016706205
ST300: RNCC: 3 | RNVC: 2

28 Feb 2018

5975-01-670-4077
Electrical-Electronic Equipment Chassis

016704077
1756-A4/B: RNCC: 3 | RNVC: 2
016223: RNCC: 5 | RNVC: 2

22 Feb 2018

5975-01-569-2236
Electrical Components Tie Down Strap

015692236
1400-0507: RNCC: 3 | RNVC: 2
1400-0507: RNCC: 3 | RNVC: 9

24 Nov 2008

5975-01-569-2241
Electrical Equipment Drawer

015692241
35181M: RNCC: 3 | RNVC: 2
35181M: RNCC: 3 | RNVC: 9

24 Nov 2008

5975-01-569-3206
Flexible Metal Conduit Assembly

015693206
10-42614-7S: RNCC: 3 | RNVC: 2

26 Nov 2008

5975-01-570-8179
Extruded Channel

015708179
T5330-0003-002: RNCC: 3 | RNVC: 2

14 Jan 2009

5975-01-571-2718
Electrical Conduit Elbow

015712718
PF9DN: RNCC: 3 | RNVC: 9

29 Jan 2009

5975-01-629-6063
Prom

016296063
74434B57K1VER02: RNCC: 3 | RNVC: 1

8 Jul 2014

5975-01-493-2699
Air Port Cover

014932699
642-8906-001: RNCC: 3 | RNVC: 2
642-8906-001: RNCC: 5 | RNVC: 2

21 Dec 2001

5975-01-435-9386
Electrical Equipment Mounting Base

014359386
452-3050: RNCC: 3 | RNVC: 9

6 Sep 1996

5975-01-495-8420
Electrical-Electronic Equipment Chassis

014958420
546-6638-003: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-656-6537
Interconnecting Box

016566537
627777: RNCC: 3 | RNVC: 2

13 Jul 2016

5975-01-622-0547
Metallic Raceway

016220547
26687666: RNCC: 3 | RNVC: 2
Y00014335: RNCC: 5 | RNVC: 2
U26687666: RNCC: 5 | RNVC: 2

26 Sep 2013

5975-01-641-1867
Junction Box

016411867
715644-1: RNCC: 3 | RNVC: 2
715644: RNCC: D | RNVC: 9

13 Jan 2015

5975-01-666-9819
Electrical-Electronic Equipment Panel

016669819
3365560-2: RNCC: 3 | RNVC: 2

28 Sep 2017

5975-01-666-3096
Interconnecting Box

016663096
UWA13360-2: RNCC: 3 | RNVC: 2

31 Aug 2017

5975-01-667-1431
Electrical-Electronic Equipment Chassis

016671431
NI-9144: RNCC: 3 | RNVC: 2

5 Oct 2017

5975-00-827-4862
Junction Box

008274862
J1197AWA6: RNCC: 3 | RNVC: 1
50252A: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-433-0758
Chassis Base

014330758
9475675-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-641-3860
Cable Hanger

016413860
783009-B21: RNCC: 3 | RNVC: 2

20 Jan 2015

5975-01-685-6617
Electrical-Electronic Equipment Chassis

016856617
K10055626-502: RNCC: 3 | RNVC: 2

7 Jan 2020

5975-01-668-9904
Electrical Grounding Plate

016689904
RGRB19U: RNCC: 3 | RNVC: 2

15 Dec 2017

5975-01-398-1892
Rigid Metal Conduit

013981892
1310-0101-36: RNCC: 3 | RNVC: 2
1310-0101-36: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-400-2509
Electrical-Electronic Equipment Chassis

014002509
3523000-30: RNCC: 3 | RNVC: 2

12 Dec 1994

5975-01-673-0047
Nonmetallic Raceway

016730047
1830: RNCC: 3 | RNVC: 2

25 May 2018

5975-01-678-8481
Electrical-Electronic Equipment Chassis

016788481
MX960BASE-AC: RNCC: 3 | RNVC: 2
MX960BASE-AC: RNCC: 5 | RNVC: 2

28 Feb 2019

5975-01-677-4780
Electrical-Electronic Equipment Chassis

016774780
N5696-B-24Q: RNCC: 3 | RNVC: 2
N5696-B-24Q: RNCC: 5 | RNVC: 2

17 Dec 2018

5975-01-682-7455
Electrical-Electronic Equipment Chassis

016827455
IMC-719-2AC-US: RNCC: 3 | RNVC: 9
605-10144-2AC: RNCC: 5 | RNVC: 2

22 Aug 2019

5975-01-683-8641
Electronic Equipment Mounting Tray

016838641
200-92002-101: RNCC: 3 | RNVC: 2

10 Oct 2019

5975-01-588-9367
Electrical Standardized Components Case

015889367
PELICAN 1400: RNCC: 3 | RNVC: 2

12 Oct 2010

5975-01-584-2820
Junction Box Cover

015842820
108214: RNCC: 3 | RNVC: 2

21 Apr 2010

5975-01-601-5252
Line Supporting Strap

016015252
CBR4S-M30: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-542-2213
Electronic Junction Rack

015422213
95031422: RNCC: 3 | RNVC: 2
95031422: RNCC: 5 | RNVC: 9

26 Jul 2006

5975-01-597-7913
Spec Cable Clamp

015977913
25710: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-674-7396
Raceway Cover

016747396
EB3T14A099DA: RNCC: 3 | RNVC: 2
7423228764: RNCC: 5 | RNVC: 2
23228764: RNCC: 5 | RNVC: 2

9 Aug 2018

5975-01-674-8201
Raceway Cover

016748201
EB3T14A099GA: RNCC: 3 | RNVC: 2
23228775: RNCC: 5 | RNVC: 2
7423228775: RNCC: 5 | RNVC: 2

13 Aug 2018

5975-01-616-8732
Electrical Equipment Rack

016168732
370-4427: RNCC: 3 | RNVC: 2

1 Mar 2013

5975-01-617-7791
Electrical Cable Nipple

016177791
0-1394512-1: RNCC: 3 | RNVC: 2
0025453480: RNCC: 5 | RNVC: 2
0025453480: RNCC: 5 | RNVC: 9

3 Apr 2013

5975-01-632-8753
Electrical Tie Down Mounting Base

016328753
ABM1M-AT-M: RNCC: 3 | RNVC: 2

31 Oct 2014

5975-01-632-8582
Electrical Equipment Rack

016328582
734807-B21: RNCC: 3 | RNVC: 2
HP-734807-B21: RNCC: 5 | RNVC: 2
734807-B21: RNCC: 5 | RNVC: 2

31 Oct 2014

5975-01-397-8666
Rigid Metal Conduit

013978666
1310-0101-22: RNCC: 3 | RNVC: 2
1310-0101-22: RNCC: 5 | RNVC: 9

21 Oct 1994

5975-01-423-7915
Electrical-Electronic Equipment Panel

014237915
84014: RNCC: 3 | RNVC: 2

10 Jan 1996

5975-01-616-2172
Electrical Components Tie Down Strap

016162172
BC1.5I-S8-M: RNCC: 3 | RNVC: 2

5 Feb 2013

5975-01-631-7176
200 Svr Bl Rr Md

016317176
09205025-02: RNCC: 3 | RNVC: 1
SB-RTM414S200MI: RNCC: 5 | RNVC: 9

23 Sep 2014

5975-01-397-1336
Electrical Equipment Rack

013971336
290-118916-01: RNCC: 3 | RNVC: 2
MT6918FSQ131: RNCC: 3 | RNVC: 2

4 Oct 1994

5975-01-397-7218
Electrical-Electronic Equipment Panel

013977218
39926-13: RNCC: 3 | RNVC: 2

18 Oct 1994

5975-01-546-2852
Electrical-Electronic Equipment Chassis

015462852
111-3803: RNCC: 3 | RNVC: 2
111-3803: RNCC: 5 | RNVC: 2

12 Dec 2006

5975-01-593-9933
Spec Cable

015939933
AE15832: RNCC: 3 | RNVC: 2

22 Apr 2011

5975-01-615-1737
Junction Box Assembly

016151737
1731231-1: RNCC: 3 | RNVC: 2
1731231-1: RNCC: 3 | RNVC: 9

3 Jan 2013

5975-01-615-3923
Electrical Tie Down Mounting Base

016153923
STBP19M9: RNCC: 3 | RNVC: 2

10 Jan 2013

5975-01-615-3611
Electrical-Electronic Equipment Chassis

016153611
508668-B21: RNCC: 3 | RNVC: 2

10 Jan 2013

5975-01-628-7930
Interior Cable Rack

016287930
HLCMK: RNCC: 3 | RNVC: 2

10 Jun 2014

5975-01-630-4790
Electrical Equipment Rack

016304790
60-604-21: RNCC: 3 | RNVC: 2

6 Aug 2014

5975-01-630-5218
Electrical-Electronic Equipment Panel

016305218
697912: RNCC: 1 | RNVC: 2
713055-20: RNCC: 3 | RNVC: 2
697912-35: RNCC: 5 | RNVC: 2

7 Aug 2014

5975-01-395-9060
Electrical Box Connector

013959060
5327909-1: RNCC: 3 | RNVC: 2

8 Sep 1994

5975-01-396-0778
Stuffing Tube Packing Nut

013960778
1210B0560: RNCC: 3 | RNVC: 2
1210B0560: RNCC: 5 | RNVC: 9

13 Sep 1994

5975-01-395-8242
Cable Spacer

013958242
221B1698P1: RNCC: 3 | RNVC: 2

7 Sep 1994

5975-01-396-3374
Electrical Cable Nipple

013963374
TCFS-16-19C-0-20-100-AH: RNCC: 3 | RNVC: 2

19 Sep 1994

5975-01-417-4387
Electrical-Electronic Equipment Chassis

014174387
4041132G1: RNCC: 3 | RNVC: 2

7 Aug 1995

5975-01-417-3352
Electrical Tie Down Mounting Base

014173352
ABM2S-S6-D69: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-479-5642
Electrical Equipment Rack

014795642
1017441: RNCC: 3 | RNVC: 2

25 Oct 2000

5975-01-613-4972
Electronic Equipment Mounting Tray

016134972
840-5035-010: RNCC: 3 | RNVC: 2

8 Nov 2012

5975-01-613-5255
Electronic Equipment Mounting Tray

016135255
IFT-9373CDTRAY: RNCC: 3 | RNVC: 2
IFT-9372CDTRAY: RNCC: 5 | RNVC: 9

8 Nov 2012

5975-01-624-2757
Ground Rod

016242757
78378680026: RNCC: 3 | RNVC: 9

20 Dec 2013

5975-01-625-0386
Electrical-Electronic Equipment Chassis

016250386
K10053234-501: RNCC: 3 | RNVC: 2

22 Jan 2014

5975-01-625-0950
Wire Strand Hanger Support Strap

016250950
8973748A: RNCC: 3 | RNVC: 2

24 Jan 2014

5975-01-626-3712
Electrical-Electronic Equipment Panel

016263712
734-65114-1: RNCC: 3 | RNVC: 2
734-65114: RNCC: D | RNVC: 9

7 Mar 2014

5975-01-626-1305
Metallic Raceway

016261305
232A1653-12: RNCC: 3 | RNVC: 2

27 Feb 2014

5975-01-627-8506
Electrical Components Tie Down Strap

016278506
DTREH-LR0: RNCC: 3 | RNVC: 2

30 Apr 2014

5975-01-627-9005
Raceway Cover

016279005
HBLTT545LB: RNCC: 3 | RNVC: 2

1 May 2014

5975-01-393-6090
Electrical Nonmetallic Conduit Assembly

013936090
5493230-50: RNCC: 3 | RNVC: 2

22 Jul 1994

5975-01-393-8846
Blank Panel

013938846
34064464-002: RNCC: 3 | RNVC: 2

29 Jul 1994

5975-01-415-6962
Electrical-Electronic Equipment Chassis

014156962
814509: RNCC: 3 | RNVC: 2

3 Jul 1995

5975-01-417-3391
Sectiona Terminal Junction Block

014173391
RC11090-6: RNCC: 3 | RNVC: 2
9D0090-6: RNCC: 5 | RNVC: 2

5 Aug 1995

5975-01-613-0586
Electrical-Electronic Equipment Chassis

016130586
M62-02559: RNCC: 3 | RNVC: 2

29 Oct 2012

5975-01-621-2949
Cable Rack Extension

016212949
131202-1013: RNCC: 3 | RNVC: 9

30 Aug 2013

5975-01-392-3147
Electrical Components Tie Down Strap

013923147
TY23M-1: RNCC: 3 | RNVC: 2

27 Jun 1994

5975-01-392-4381
Junction Box Cover

013924381
5496137: RNCC: 3 | RNVC: 2

29 Jun 1994

5975-01-393-2695
Electrical-Electronic Equipment Panel

013932695
G160159: RNCC: 3 | RNVC: 2

18 Jul 1994

5975-00-982-5908
Electrical Equipment Mounting Base

009825908
2085709-1: RNCC: 3 | RNVC: 2
2087016-1201: RNCC: 5 | RNVC: 2
MTA12A: RNCC: 5 | RNVC: 9

14 Oct 1966

5975-01-304-3816
Conduit Outlet

013043816
710-M007N03: RNCC: 3 | RNVC: 2

18 Jul 1989

5975-01-505-5396
Electronic Equipment Mounting Tray

015055396
MC14-TR+PS9X2: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-01-611-4819
Electrical Equipment Mounting Base

016114819
A-320V1-H QM: RNCC: 3 | RNVC: 2

17 Sep 2012

5975-01-612-6850
Insulator Bracket

016126850
2890W12G712: RNCC: 3 | RNVC: 2

18 Oct 2012

5975-01-616-9546
Electrical Conductor Bushing

016169546
953-236506: RNCC: 3 | RNVC: 2
25034449: RNCC: 5 | RNVC: 2
1H4B-AB-0000-V0013: RNCC: 5 | RNVC: 2

5 Mar 2013

5975-01-618-6090
Switch Terminal Cover

016186090
BL-16498-1: RNCC: 3 | RNVC: 2

30 Apr 2013

5975-01-391-7803
Electrical Equipment Cabinet

013917803
770067-5: RNCC: 3 | RNVC: 9

16 Jun 1994

5975-01-392-4571
Junction Box

013924571
NMS9300: RNCC: 3 | RNVC: 2
24960: RNCC: 5 | RNVC: 2

29 Jun 1994

5975-01-505-5218
Flexible Metal Conduit Assembly

015055218
230226-DL0000: RNCC: 3 | RNVC: 2
759-498-533: RNCC: 5 | RNVC: 2
17B2E2000-533: RNCC: 7 | RNVC: 2

10 Mar 2003

5975-01-505-8239
Electrical-Electronic Equipment Panel

015058239
5026-1-7: RNCC: 3 | RNVC: 2

17 Mar 2003

5975-01-505-2445
Cable Shield Adapter

015052445
SEEPA-N-E-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-661-4702
Electrical-Electronic Equipment Chassis

016614702
E-X5682A-0E-R6-C: RNCC: 3 | RNVC: 2

3 Mar 2017

5975-01-661-9685
Electrical-Electronic Equipment Panel

016619685
85F1001-1: RNCC: 3 | RNVC: 2

22 Mar 2017

5975-01-662-1693
Electrical-Electronic Equipment Chassis

016621693
8555066: RNCC: 3 | RNVC: 2

29 Mar 2017

5975-00-967-9354
Metallic Raceway

009679354
9183760: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-962-7192
Rigid Metal Conduit

009627192
775159-61: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-521-3625
Electrical-Electronic Equipment Chassis

015213625
G000809-18CR: RNCC: 3 | RNVC: 2

18 Jun 2004

5975-01-371-0664
Stuffing Tube

013710664
27082-530: RNCC: 3 | RNVC: 2

5 Feb 1993

5975-01-397-0131
Stuffing Tube

013970131
221B1246P1: RNCC: 3 | RNVC: 2

30 Sep 1994

5975-01-075-1910
Conduit Outlet

010751910
FS2029: RNCC: 3 | RNVC: 2

15 Apr 1979

5975-01-503-5847
Strain Relief

015035847
10047-621: RNCC: 3 | RNVC: 2

24 Dec 2002

5975-01-661-4996
Electrical-Electronic Equipment Chassis

016614996
CDAQ-9178: RNCC: 3 | RNVC: 2

6 Mar 2017

5975-01-288-9881
Electrical Equipment Rack

012889881
A3015096: RNCC: 3 | RNVC: 2
MT-6619/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-519-7606
Electrical-Electronic Equipment Chassis

015197606
817R579G02: RNCC: 3 | RNVC: 2

29 Apr 2004

5975-01-519-4292
Cable Marker Sleeve

015194292
10253825-6: RNCC: 3 | RNVC: 2

19 Apr 2004

5975-01-429-5295
Stuffing Tube

014295295
8Y9015: RNCC: 3 | RNVC: 2

12 Apr 1996

5975-01-502-1627
Electrical Conduit Adapter

015021627
FA462: RNCC: 3 | RNVC: 9

28 Oct 2002

5975-01-657-2167
Blank Panel

016572167
38659-42087-1: RNCC: 3 | RNVC: 2

3 Aug 2016

5975-00-685-8611
Electrical-Electronic Equipment Chassis

006858611
9018568: RNCC: 3 | RNVC: 2
LA8566-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-516-3111
Electrical Bonding Ring

015163111
AII-MTS-01-214APPENDIXBITEM11: RNCC: 3 | RNVC: 1
DOD-STD-2003FIG3A212: RNCC: 5 | RNVC: 1

31 Dec 2003

5975-01-517-2938
Electrical Components Tie Down Strap

015172938
TY24M-1: RNCC: 3 | RNVC: 2

4 Feb 2004

5975-01-535-6594
Electrical Equipment Cabinet

015356594
359836-AN8: RNCC: 3 | RNVC: 2

7 Dec 2005

5975-01-501-5244
Electrical Equipment Mounting Base

015015244
11039-1400-01: RNCC: 3 | RNVC: 2

3 Oct 2002

5975-01-655-1378
Electronic Equipment Mounting Tray

016551378
MT6-6314-110: RNCC: 3 | RNVC: 2

19 May 2016

5975-01-655-2342
Rigid Metal Conduit

016552342
25-8NT5-1: RNCC: 3 | RNVC: 2

23 May 2016

5975-01-456-5233
Electrical Equipment Mounting Base

014565233
11463255: RNCC: 3 | RNVC: 2

16 Jun 1998

5975-01-452-0756
Electrical Equipment Mounting Base

014520756
8026118: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-499-6854
Electronic Junction Rack

014996854
1505963B-L: RNCC: 3 | RNVC: 2

31 Jul 2002

5975-01-499-5174
Electrical Components Tie Down Strap

014995174
S9NY-265-0-C: RNCC: 3 | RNVC: 2

25 Jul 2002

5975-01-328-4905
Electrical Equipment Cabinet

013284905
N36308: RNCC: 3 | RNVC: 2

2 Nov 1990

5975-01-334-5436
Electrical-Electronic Equipment Chassis

013345436
648Z1279-1: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-330-7226
Electrical-Electronic Equipment Chassis

013307226
596796-G02: RNCC: 3 | RNVC: 2

7 Dec 1990

5975-01-342-6037
Cable Marker Sleeve

013426037
651036-127: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-452-5775
Electrical Equipment Cabinet

014525775
9948: RNCC: 3 | RNVC: 9

30 Jan 1998

5975-01-506-9274
Electrical-Electronic Equipment Chassis

015069274
4081666-0501: RNCC: 3 | RNVC: 2
4081666-0501: RNCC: 5 | RNVC: 2

14 Apr 2003

5975-01-508-8046
Chassis Base

015088046
151-006290-101: RNCC: 3 | RNVC: 2

3 Jun 2003

5975-01-508-3617
Guide Rail

015083617
910138-7: RNCC: 3 | RNVC: 2

19 May 2003

5975-01-462-3527
Electrical Equipment Rack

014623527
CCHA40244: RNCC: 3 | RNVC: 2

29 Jan 1999

5975-01-498-5699
Rigid Metal Conduit

014985699
5HM33101-101: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-498-7296
Rigid Metal Conduit Assembly

014987296
5HB71102-287: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-258-9037
Blank Panel

012589037
6003060G001: RNCC: 3 | RNVC: 2

10 Jul 1987

5975-01-447-4440
Cable Marker Sleeve

014474440
TMS-SCE-1/4-1.5-9: RNCC: 3 | RNVC: 9

6 Aug 1997

5975-01-450-6325
Preformed Guy Grip

014506325
CDE-3103: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-00-512-1099
Electrical Components Tie Down Strap

005121099
MS3367-4-5: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

3 Aug 1974

5975-00-012-4116
Junction Box Cover

000124116
MT20341-050-010: RNCC: 3 | RNVC: 2

18 Apr 1967

5975-01-589-1909
Electrical Equipment Mounting Base

015891909
918872-3: RNCC: 3 | RNVC: 2

20 Oct 2010

5975-01-589-2295
Electrical Equipment Rack

015892295
290932-1: RNCC: 3 | RNVC: 2

21 Oct 2010

5975-01-590-0293
Electrical Equipment Mounting Base

015900293
M125014: RNCC: 3 | RNVC: 2
M125014: RNCC: 3 | RNVC: 9

15 Nov 2010

5975-01-590-7044
Electrical-Electronic Equipment Chassis

015907044
10990A: RNCC: 3 | RNVC: 2

16 Dec 2010

5975-01-590-5799
Electronic Equipment Mounting Tray

015905799
NP-PAN-CRADLE: RNCC: 3 | RNVC: 2

10 Dec 2010

5975-01-590-8657
Stuffing Tube

015908657
M24235/10-10: RNCC: 2 | RNVC: 2
MIL-S-24235/10: RNCC: 5 | RNVC: 1

28 Dec 2010

5975-01-589-4719
Electrical Equipment Mounting Base

015894719
M095063: RNCC: 3 | RNVC: 2
M095063: RNCC: 3 | RNVC: 9

27 Oct 2010

5975-01-590-2273
Electrical Equipment Mounting Base

015902273
047-12623-0001: RNCC: 3 | RNVC: 2
047-12623-0001: RNCC: 5 | RNVC: 2

23 Nov 2010

5975-01-590-1703
Electrical Equipment Mounting Base

015901703
M025038-002: RNCC: 3 | RNVC: 2
M025038-002: RNCC: 3 | RNVC: 9

22 Nov 2010

5975-01-318-0043
Electrical Equipment Mounting Base

013180043
622-8117-001: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-01-317-2262
Cable Marker Sleeve

013172262
SS7074-2780: RNCC: 3 | RNVC: 2
BR81044/12-14-2: RNCC: 5 | RNVC: 2

24 Mar 1990

5975-01-018-9702
Electrical Wall Plate

010189702
SK2: RNCC: 3 | RNVC: 9

2 Apr 1976

5975-01-495-8426
Electrical-Electronic Equipment Chassis

014958426
546-6686-003: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-496-0878
Electrical-Electronic Equipment Panel

014960878
687-3810-002: RNCC: 3 | RNVC: 2

2 Apr 2002

5975-01-495-8394
Electrical-Electronic Equipment Chassis

014958394
687-3777-001: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-587-4772
Electrical Equipment Rack Base

015874772
5230337-100: RNCC: 3 | RNVC: 2

9 Aug 2010

5975-01-587-5528
Electrical Equipment Rack

015875528
MNT-2PST-RACK: RNCC: 3 | RNVC: 2

11 Aug 2010

5975-01-587-9076
Electrical Equipment Rack

015879076
284680-1: RNCC: 3 | RNVC: 2

25 Aug 2010

5975-01-587-5307
Electronic Equipment Mounting Tray

015875307
612826A: RNCC: 3 | RNVC: 2
4028-T54: RNCC: 5 | RNVC: 2

10 Aug 2010

5975-01-587-7485
Electrical Equipment Rack

015877485
RA-U/33Q: RNCC: 3 | RNVC: 2

19 Aug 2010

5975-01-587-9892
Electrical Equipment Rack

015879892
1024112-01: RNCC: 3 | RNVC: 2
1024112-01: RNCC: 5 | RNVC: 2

27 Aug 2010

5975-01-588-2308
Electrical Equipment Cabinet

015882308
300-5944-01: RNCC: 3 | RNVC: 2

8 Sep 2010

5975-01-588-2672
Junction Box

015882672
ISL-21-5009-00: RNCC: 3 | RNVC: 2

9 Sep 2010

5975-00-722-8421
Electrical Box Connector

007228421
279: RNCC: 3 | RNVC: 2
ACV-51: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-723-0390
Flexible Metal Conduit

007230390
7230390: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-442-2222
Electrical Cable Nipple

014422222
3353960-3: RNCC: 3 | RNVC: 2

7 Mar 1997

5975-01-442-4644
Electrical Equipment Rack

014424644
90400045: RNCC: 3 | RNVC: 2

14 Mar 1997

5975-00-243-3276
Conduit Outlet

002433276
B17: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-240-2742
Conduit Outlet

002402742
LL17: RNCC: 3 | RNVC: 2
10079-6: RNCC: 5 | RNVC: 9
LL50M: RNCC: 5 | RNVC: 9
1665-43-6: RNCC: 5 | RNVC: 9
0661: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-959-8304
Electrical-Electronic Equipment Chassis

009598304
530159: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-903-4728
Conduit Outlet

009034728
T18: RNCC: 3 | RNVC: 2
T-50: RNCC: 5 | RNVC: 9
70-56: RNCC: 5 | RNVC: 9

20 Jun 1966

5975-01-495-1480
Electrical-Electronic Equipment Chassis

014951480
470860-1: RNCC: 3 | RNVC: 2

7 Mar 2002

5975-01-584-5614
Electronic Equipment Mounting Tray

015845614
MT6-6306: RNCC: 3 | RNVC: 2

29 Apr 2010

5975-01-586-3082
Electrical-Electronic Equipment Chassis

015863082
794120-02: RNCC: 3 | RNVC: 9

23 Jun 2010

5975-01-585-9060
Electrical-Electronic Equipment Panel

015859060
107679: RNCC: 3 | RNVC: 2

11 Jun 2010

5975-01-586-0646
Rigid Metal Conduit

015860646
6555047-6: RNCC: 3 | RNVC: 2
6555047-6: RNCC: 3 | RNVC: 9

17 Jun 2010

5975-01-587-2700
Cord Assembly Fastener

015872700
FS-ZA-Z50: RNCC: 3 | RNVC: 2

30 Jul 2010

5975-00-178-0446
Stuffing Tube

001780446
9S5235LSYMB0L1680: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0573
Stuffing Tube

001780573
9S5010LALT17TYPE21SIZEF: RNCC: 3 | RNVC: 2
17T10190: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-011-5187
Cable Clamp Spacer

010115187
1113498-1: RNCC: 3 | RNVC: 9
17-15KE17FIG9-5-10: RNCC: 5 | RNVC: 2
17-15KE17FIG9-5-10FIG9-5-15: RNCC: 5 | RNVC: 2
1113498-1: RNCC: 5 | RNVC: 2

23 Oct 1975

5975-01-477-1016
Guide Rail

014771016
5261003-2: RNCC: 3 | RNVC: 2

31 Jul 2000

5975-00-174-2647
Conduit Outlet

001742647
S-346: RNCC: 3 | RNVC: 2

26 Apr 1981

5975-01-492-7018
Electrical-Electronic Equipment Panel

014927018
CCH-CP12-91: RNCC: 3 | RNVC: 2

10 Dec 2001

5975-01-493-1957
Electrical-Electronic Equipment Chassis

014931957
125486-25: RNCC: 3 | RNVC: 2

19 Dec 2001

5975-01-493-4116
Electrical Equipment Rack

014934116
RSO/U RACK: RNCC: 3 | RNVC: 2
387256-001: RNCC: 3 | RNVC: 2

4 Jan 2002

5975-01-678-3146
Electrical Equipment Drawer

016783146
10067892: RNCC: 3 | RNVC: 2

31 Jan 2019

5975-01-678-7881
Electrical-Electronic Equipment Chassis

016787881
MX960-PREMIUM2-AC: RNCC: 3 | RNVC: 2
MX960-PREMIUM2-AC: RNCC: 5 | RNVC: 2

26 Feb 2019

5975-01-678-8608
Electrical Conduit Adapter

016788608
36-011: RNCC: 3 | RNVC: 2

1 Mar 2019

5975-01-678-8914
Electrical Grounding Plate

016788914
4017608: RNCC: 3 | RNVC: 2

4 Mar 2019

5975-01-585-0492
Electrical-Electronic Equipment Panel

015850492
78870-502: RNCC: 3 | RNVC: 2
245-960123-000: RNCC: 5 | RNVC: 2

14 May 2010

5975-01-475-8781
Electrical-Electronic Equipment Chassis

014758781
CISCO 7204: RNCC: 3 | RNVC: 2

15 Jun 2000

5975-01-563-4790
Electrical-Electronic Equipment Chassis

015634790
12V15MMX98N4VP31-BN: RNCC: 3 | RNVC: 2

12 May 2008

5975-01-563-9683
Electrical Equipment Mounting Base

015639683
99010-01: RNCC: 3 | RNVC: 9

30 May 2008

5975-01-674-8552
Electrical Cable Assembly Protector

016748552
EZDG444S2: RNCC: 3 | RNVC: 2

14 Aug 2018

5975-01-674-5755
Electrical-Electronic Equipment Chassis

016745755
ION002-AD-EU: RNCC: 3 | RNVC: 9
92009358: RNCC: 5 | RNVC: 2

2 Aug 2018

5975-01-674-7448
Electrical Cable Protector

016747448
9M3517A124AA: RNCC: 3 | RNVC: 2
7423228662: RNCC: 5 | RNVC: 2
23228662: RNCC: 5 | RNVC: 2

9 Aug 2018

5975-01-674-5834
Flexible Nonmetallic Conduit

016745834
15011-050: RNCC: 3 | RNVC: 2

2 Aug 2018

5975-01-408-4997
Electrical Equipment Rack

014084997
E3661A: RNCC: 3 | RNVC: 2

17 Feb 1995

5975-01-562-2824
End Packing

015622824
M24705/1AC2A: RNCC: 4 | RNVC: 1
301-7006850ITEM124: RNCC: 5 | RNVC: 1

3 Apr 2008

5975-01-674-6202
Stuffing Tube

016746202
449.400.021: RNCC: 3 | RNVC: 2

3 Aug 2018

5975-01-674-6370
Electrical Equipment Rack

016746370
RCKMNT-REC-1.5RU: RNCC: 3 | RNVC: 2

3 Aug 2018

5975-01-320-9903
Flexible Metal Conduit Assembly

013209903
47014-50: RNCC: 3 | RNVC: 2

7 Jun 1990

5975-01-473-1837
Electrical-Electronic Equipment Chassis

014731837
8520753-901: RNCC: 3 | RNVC: 2

29 Mar 2000

5975-01-319-2552
Electrical Box Connector

013192552
LS966-24: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-471-1246
Electrical Equipment Cabinet

014711246
348710-002: RNCC: 3 | RNVC: 2

24 Jan 2000

5975-01-471-7549
Blank Panel

014717549
998494-1: RNCC: 3 | RNVC: 2

14 Feb 2000

5975-01-473-0070
Electrical-Electronic Equipment Chassis

014730070
346134-2: RNCC: 3 | RNVC: 2

23 Mar 2000

5975-01-560-8200
Flexible Nonmetallic Conduit

015608200
74A885630-1017: RNCC: 3 | RNVC: 2

13 Feb 2008

5975-01-561-0383
Flexible Nonmetallic Conduit

015610383
T23201B-0E0000: RNCC: 3 | RNVC: 2

22 Feb 2008

5975-01-671-3484
Electrical Cable Support

016713484
CB9297-AA-5N: RNCC: 3 | RNVC: 2

22 Mar 2018

5975-01-671-5765
Ground Rod

016715765
E600-GR8: RNCC: 3 | RNVC: 2
E600-GR8: RNCC: 5 | RNVC: 2

3 Apr 2018

5975-01-672-0022
Electrical Equipment Cabinet

016720022
LHC353020SS: RNCC: 3 | RNVC: 2

18 Apr 2018

5975-01-672-5109
Processing Cabinet

016725109
70600-01719-103: RNCC: 3 | RNVC: 2

4 May 2018

5975-01-421-3315
Electrical-Electronic Equipment Chassis

014213315
PSP 16E2X: RNCC: 3 | RNVC: 2
82016: RNCC: 5 | RNVC: 2

6 Nov 1995

5975-01-471-0512
Junction Box

014710512
042775: RNCC: 3 | RNVC: 2

20 Jan 2000

5975-01-559-0650
Electrical Equipment Mounting Base

015590650
BE02000: RNCC: 3 | RNVC: 2

4 Dec 2007

5975-01-559-7621
Electronic Equipment Mounting Tray

015597621
RK-12V2: RNCC: 3 | RNVC: 2

4 Jan 2008

5975-01-668-8435
Junction Box

016688435
DXE-UE-2P: RNCC: 3 | RNVC: 2

8 Dec 2017

5975-01-668-9072
Electrical-Electronic Equipment Panel

016689072
713253-3: RNCC: 3 | RNVC: 2

12 Dec 2017

5975-01-669-5360
Blank Panel

016695360
AIR-BZL-C220M4: RNCC: 3 | RNVC: 2

11 Jan 2018

5975-01-670-0212
Electrical Equipment Rack

016700212
1USHL-139: RNCC: 3 | RNVC: 2
6193.2220.00: RNCC: 5 | RNVC: 2

1 Feb 2018

5975-01-668-9802
Cable Hanger

016689802
L45CLICK: RNCC: 3 | RNVC: 2

14 Dec 2017

5975-01-669-0719
Mounting Plate

016690719
H292965-PCP: RNCC: 3 | RNVC: 2
60223242-01: RNCC: 5 | RNVC: 2

20 Dec 2017

5975-01-669-5363
Blank Panel

016695363
AIR-PSU-BLKP1U: RNCC: 3 | RNVC: 2

11 Jan 2018

5975-01-316-8338
Electrical-Electronic Equipment Chassis

013168338
17504: RNCC: 3 | RNVC: 2

16 Mar 1990

5975-01-316-4325
Electrical-Electronic Equipment Panel

013164325
230141-21-4: RNCC: 3 | RNVC: 9
230141-21-4: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-01-418-1632
Cable Marker Sleeve

014181632
17P1E1414-5: RNCC: 3 | RNVC: 2

21 Aug 1995

5975-01-419-1930
Sectiona Terminal Junction Block

014191930
9D0090-6U: RNCC: 3 | RNVC: 2
9D0090-6U: RNCC: 5 | RNVC: 2
RC11090-6U: RNCC: 5 | RNVC: 2
RC11090: RNCC: D | RNVC: 9

15 Sep 1995

5975-01-469-6856
Conduit Box

014696856
00-120990: RNCC: 3 | RNVC: 2

18 Nov 1999

5975-01-558-3608
Electrical Equipment Mounting Base

015583608
WS-X4596: RNCC: 3 | RNVC: 2
WS-X4596: RNCC: 5 | RNVC: 2

7 Nov 2007

5975-01-557-9697
Electrical-Electronic Equipment Chassis

015579697
IXIA 400T: RNCC: 3 | RNVC: 9

31 Oct 2007

5975-01-696-8165
Electronic Equipment Mounting Tray

016968165
95576-1: RNCC: 3 | RNVC: 2

18 Aug 2021

5975-01-697-1525
Strain Electrical Conductor Clamp

016971525
GC065: RNCC: 3 | RNVC: 2

3 Sep 2021

5975-01-696-7931
Electrical Equipment Mounting Base

016967931
FORAX-RM-3U-A4L: RNCC: 3 | RNVC: 2

18 Aug 2021

5975-01-697-1931
Electrical Equipment Shelf

016971931
UPB86099-1: RNCC: 3 | RNVC: 2

7 Sep 2021

5975-01-667-2728
Electronic Equipment Mounting Tray

016672728
3356044-1: RNCC: 3 | RNVC: 2

10 Oct 2017

5975-01-667-5088
Flexible Metal Conduit Assembly

016675088
6V-5819: RNCC: 3 | RNVC: 2

19 Oct 2017

5975-01-697-2249
Switch Terminal Cover

016972249
11829344-00: RNCC: 3 | RNVC: 2

9 Sep 2021

5975-01-315-8947
Electrical Equipment Mounting Base

013158947
33V4-125: RNCC: 3 | RNVC: 2

26 Feb 1990

5975-01-555-8815
Electrical Equipment Rack Base

015558815
36789: RNCC: 3 | RNVC: 2

17 Sep 2007

5975-01-694-4436
Junction Box

016944436
1649306-1: RNCC: 3 | RNVC: 2
1649306-1: RNCC: 5 | RNVC: 2

2 Apr 2021

5975-01-695-8636
Electrical Conduit Union

016958636
STR125B: RNCC: 3 | RNVC: 2

28 Jun 2021

5975-01-696-5951
Rigid Nonmetallic Conduit

016965951
102366: RNCC: 3 | RNVC: 2

5 Aug 2021

5975-01-696-7158
Electrical Equipment Shelf

016967158
1305AS1332-128: RNCC: 3 | RNVC: 2

12 Aug 2021

5975-01-693-2875
Rigid Metal Conduit

016932875
ALP012A: RNCC: 3 | RNVC: 2
13599087-1: RNCC: 3 | RNVC: 2
AL1/2: RNCC: 5 | RNVC: 9
13599087: RNCC: 7 | RNVC: 2

2 Feb 2021

5975-01-695-1441
Electrical Equipment Cabinet

016951441
CB36799-001: RNCC: 3 | RNVC: 2

17 May 2021

5975-01-313-7520
Electrical Equipment Rack

013137520
10242-6200: RNCC: 3 | RNVC: 2

16 Jan 1990

5975-01-314-0535
Electrical Equipment Mounting Base

013140535
5188635: RNCC: 3 | RNVC: 2
5188635: RNCC: 3 | RNVC: 2
5188635: RNCC: 5 | RNVC: 9
51886355: RNCC: 5 | RNVC: 9

23 Jan 1990

5975-01-413-6669
Blank Panel

014136669
5062-5597: RNCC: 3 | RNVC: 2

18 May 1995

5975-01-536-2194
Electrical Equipment Rack

015362194
65000125: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-535-9239
Flexible Metal Conduit

015359239
230746-DL0000: RNCC: 3 | RNVC: 2

14 Dec 2005

5975-01-537-2296
Flexible Metal Conduit Assembly

015372296
75A732268-2003: RNCC: 3 | RNVC: 2

31 Jan 2006

5975-01-537-1251
Electrical Equipment Cabinet

015371251
083701-0400: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-538-0401
Electrical-Electronic Equipment Panel

015380401
030587-0001: RNCC: 3 | RNVC: 2

8 Mar 2006

5975-01-554-7187
Electrical Grounding Plate

015547187
PE24879: RNCC: 3 | RNVC: 2

17 Aug 2007

5975-01-554-7530
Electrical Chassis

015547530
262146G1: RNCC: 3 | RNVC: 2

17 Aug 2007

5975-01-554-3158
Blank Panel

015543158
6199-10050-73: RNCC: 3 | RNVC: 2

6 Aug 2007

5975-01-688-3585
Electrical Equipment Drawer

016883585
900-63520: RNCC: 3 | RNVC: 1

14 May 2020

5975-01-689-8925
Junction Box

016898925
000-023-459-180: RNCC: 3 | RNVC: 2
000-023-459-180: RNCC: 5 | RNVC: 2

15 Jul 2020

5975-01-689-7612
Electrical Equipment Rack

016897612
AR3100X717: RNCC: 3 | RNVC: 2
1AAN019516: RNCC: 5 | RNVC: 2

9 Jul 2020

5975-01-690-4610
Junction Box

016904610
CSD24248EMCSS: RNCC: 3 | RNVC: 2

13 Aug 2020

5975-01-689-5350
Grounding Kit

016895350
539924: RNCC: 3 | RNVC: 2

25 Jun 2020

5975-01-690-0330
Electrical Equipment Rack

016900330
CMT-1U: RNCC: 3 | RNVC: 2

22 Jul 2020

5975-01-691-6689
Junction Box

016916689
JG.CS.FZ-N1: RNCC: 3 | RNVC: 2

22 Oct 2020

5975-01-692-1335
Electronic Equipment Mounting Tray

016921335
MT4-2342-102: RNCC: 3 | RNVC: 2

20 Nov 2020

5975-01-692-4564
Electrical Box Connector

016924564
SYLZ769-010: RNCC: 3 | RNVC: 2

15 Dec 2020

5975-01-694-4551
Electrical Equipment Mounting Base

016944551
D1268849: RNCC: 3 | RNVC: 2

2 Apr 2021

5975-01-694-4280
Electrical Equipment Shelf

016944280
11421-6714-01: RNCC: 3 | RNVC: 2

1 Apr 2021

5975-01-312-8184
Electrical Equipment Mounting Base

013128184
628-6561-001: RNCC: 3 | RNVC: 2

22 Dec 1989

5975-01-533-5854
Interconnecting Box

015335854
DU322RB: RNCC: 3 | RNVC: 2
7800-0074-001: RNCC: 5 | RNVC: 2

20 Sep 2005

5975-01-533-4656
Electrical Equipment Rack

015334656
9741-1000: RNCC: 3 | RNVC: 2

15 Sep 2005

5975-01-533-5497
Electrical Equipment Mounting Base

015335497
1784001-101: RNCC: 3 | RNVC: 2
95628-2: RNCC: 5 | RNVC: 2

20 Sep 2005

5975-00-013-9993
Electrical Equipment Mounting Base

000139993
MT4579U: RNCC: 3 | RNVC: 2
22171-1: RNCC: 5 | RNVC: 2

29 Sep 1972

5975-01-553-4270
Electrical-Electronic Equipment Chassis

015534270
7421221-10: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-554-0574
Face Plate

015540574
60-632-02: RNCC: 3 | RNVC: 2

27 Jul 2007

5975-01-686-4834
Electrical Bonding Ring

016864834
397-0630: RNCC: 3 | RNVC: 2

18 Feb 2020

5975-01-687-2240
Junction Box

016872240
62828-40492-10: RNCC: 3 | RNVC: 2

24 Mar 2020

5975-01-687-7099
Junction Box

016877099
000-022-302-01: RNCC: 3 | RNVC: 2
000-022-302-01: RNCC: 5 | RNVC: 2

14 Apr 2020

5975-01-687-6985
Electrical-Electronic Equipment Panel

016876985
UPB95858-1: RNCC: 3 | RNVC: 2

14 Apr 2020

5975-01-687-9135
Junction Box

016879135
000-023-786-02: RNCC: 3 | RNVC: 2
000-023-786-02: RNCC: 5 | RNVC: 2

23 Apr 2020

5975-01-688-1367
Electrical Wall Plate

016881367
10-4680081P01: RNCC: 3 | RNVC: 2

5 May 2020

5975-01-688-4865
Electrical-Electronic Equipment Chassis

016884865
784782-01: RNCC: 3 | RNVC: 2
784782-01: RNCC: 5 | RNVC: 2
784782-01: RNCC: 5 | RNVC: 2
10463596: RNCC: 6 | RNVC: 9

18 May 2020

5975-01-310-3518
Electrical-Electronic Equipment Chassis

013103518
SM-D-968930-1: RNCC: 3 | RNVC: 2

2 Nov 1989

5975-01-530-6676
Cable Terminal Chamber

015306676
XAGA550-43/8-200: RNCC: 3 | RNVC: 2

7 Jun 2005

5975-01-552-3170
Electrical Equipment Mounting Base

015523170
719-0060-001: RNCC: 3 | RNVC: 2

11 Jun 2007

5975-01-553-6854
Electronic Equipment Mounting Tray

015536854
MT6-6310-101: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-685-1299
Electrical Equipment Cabinet

016851299
JG.IMPCT.GLXY.S9: RNCC: 3 | RNVC: 2

3 Dec 2019

5975-01-685-8747
Electrical-Electronic Equipment Chassis

016858747
XPN-141021-3319-I/O: RNCC: 3 | RNVC: 2
K10055570-5: RNCC: 7 | RNVC: 2

17 Jan 2020

5975-01-684-5427
Electrical Equipment Rack

016845427
5855280-2: RNCC: 3 | RNVC: 2

6 Nov 2019

5975-01-684-7460
Cable Collar

016847460
TMS-SCE-1K-1/2-2.0-0: RNCC: 3 | RNVC: 2
Y00022188: RNCC: 5 | RNVC: 2

14 Nov 2019

5975-01-685-7204
Junction Box

016857204
K10055541-1: RNCC: 3 | RNVC: 2

9 Jan 2020

5975-01-685-7053
Interconnecting Box

016857053
K10053807-502: RNCC: 3 | RNVC: 2

8 Jan 2020

5975-01-308-2352
Board Terminal Assy

013082352
70450-21811-041: RNCC: 3 | RNVC: 2

27 Sep 1989

5975-01-309-2163
Blank Panel

013092163
92211T: RNCC: 3 | RNVC: 2

13 Oct 1989

5975-00-989-2008
Electrical Box Connector

009892008
SP5308: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-01-408-4993
Electrical Equipment Rack

014084993
E3660A: RNCC: 3 | RNVC: 2

17 Feb 1995

5975-01-525-4229
Electrical Components Tie Down Strap

015254229
HRM/01-0001: RNCC: 3 | RNVC: 2

8 Nov 2004

5975-01-525-1721
Cable Marker Sleeve

015251721
HS030WE1NF038B: RNCC: 3 | RNVC: 2
16100531-015: RNCC: 5 | RNVC: 2

29 Oct 2004

5975-01-525-3231
Rigid Metal Conduit

015253231
75A355401-2009: RNCC: 3 | RNVC: 2

3 Nov 2004

5975-01-526-0598
Electrical Equipment Rack

015260598
E3661B: RNCC: 3 | RNVC: 2
E3661B: RNCC: 3 | RNVC: 9

6 Dec 2004

5975-01-526-0141
Flexible Nonmetallic Conduit

015260141
75A355401-2007: RNCC: 3 | RNVC: 2

3 Dec 2004

5975-01-337-9696
Conduit Outlet

013379696
D32726-1: RNCC: 3 | RNVC: 9

24 Apr 1991

5975-01-345-6893
Stuffing Tube

013456893
3219B: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-585-3752
Electrical-Electronic Equipment Panel

015853752
414E2636-2: RNCC: 3 | RNVC: 2

25 May 2010

5975-01-585-9096
Electrical Equipment Cabinet

015859096
107751: RNCC: 3 | RNVC: 2

11 Jun 2010

5975-01-586-3039
Electrical-Electronic Equipment Chassis

015863039
POWEREDGE 2420 24U: RNCC: 3 | RNVC: 2

23 Jun 2010

5975-01-550-3183
Cable Terminal Chamber

015503183
T172353: RNCC: 3 | RNVC: 2
T172353: RNCC: 5 | RNVC: 2
T172353: RNCC: 5 | RNVC: 2
T172353: RNCC: 5 | RNVC: 9
T172353: RNCC: 5 | RNVC: 9

16 Apr 2007

5975-01-550-4592
Electronic Equipment Mounting Tray

015504592
3085870-101: RNCC: 3 | RNVC: 2

19 Apr 2007

5975-01-551-4737
Electronic Equipment Mounting Tray

015514737
8050695/E: RNCC: 3 | RNVC: 2
8050695C/A: RNCC: 5 | RNVC: 9

17 May 2007

5975-01-551-2626
Electrical-Electronic Equipment Chassis

015512626
CWDM-CHASSIS-2: RNCC: 3 | RNVC: 2

10 May 2007

5975-01-551-3998
Electrical Equipment Cabinet

015513998
U3001034-01: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-679-5537
Electrical-Electronic Equipment Chassis

016795537
CB23672-001: RNCC: 3 | RNVC: 2

29 Mar 2019

5975-01-678-9140
Electrical Conduit Adapter

016789140
36-014: RNCC: 3 | RNVC: 2

5 Mar 2019

5975-01-679-1426
Electrical-Electronic Equipment Chassis

016791426
CHAS-MX80-T-S: RNCC: 3 | RNVC: 2
CHAS-MX80-T-S: RNCC: 5 | RNVC: 2

11 Mar 2019

5975-01-679-4627
Electrical-Electronic Equipment Panel

016794627
CC10478-001: RNCC: 3 | RNVC: 2

26 Mar 2019

5975-01-681-9081
Electrical-Electronic Equipment Chassis

016819081
HPE 3PAR STORESERV 8200: RNCC: 3 | RNVC: 2

12 Jul 2019

5975-01-683-1182
Electronic Equipment Mounting Tray

016831182
3800-RAK: RNCC: 3 | RNVC: 2

10 Sep 2019

5975-01-679-4712
Electrical-Electronic Equipment Chassis

016794712
EX4500-4PST-RMK: RNCC: 3 | RNVC: 2
EX4500-4PST-RMK: RNCC: 5 | RNVC: 2

26 Mar 2019

5975-01-681-6443
Electrical Components Tie Down Strap

016816443
151482: RNCC: 3 | RNVC: 2
151482: RNCC: 5 | RNVC: 2
129048: RNCC: 5 | RNVC: 2

26 Jun 2019

5975-01-407-5909
Blank Panel

014075909
516282-05: RNCC: 3 | RNVC: 2
516282-05: RNCC: 3 | RNVC: 9

31 Jan 1995

5975-01-584-2824
Junction Box Cover

015842824
107487: RNCC: 3 | RNVC: 2

21 Apr 2010

5975-01-549-3805
Electrical Components Tie Down Strap

015493805
BT41-C: RNCC: 3 | RNVC: 2

19 Mar 2007

5975-01-661-4613
Electrical-Electronic Equipment Chassis

016614613
AR203A: RNCC: 3 | RNVC: 2

3 Mar 2017

5975-01-687-7012
Electrical Equipment Mounting Base

016877012
504661-001: RNCC: 3 | RNVC: 2

14 Apr 2020

5975-01-307-1057
Upper Cover

013071057
EC-10012-2: RNCC: 3 | RNVC: 2

7 Sep 1989

5975-01-406-3162
Electrical-Electronic Equipment Chassis

014063162
453636-03: RNCC: 3 | RNVC: 2
453636-03: RNCC: 3 | RNVC: 9

29 Dec 1994

5975-01-406-2580
Junction Box Plug

014062580
WPBP50: RNCC: 3 | RNVC: 9

27 Dec 1994

5975-01-406-1891
Junction Box Extension

014061891
187: RNCC: 3 | RNVC: 2
53151-1/2-3/4: RNCC: 3 | RNVC: 2

23 Dec 1994

5975-01-548-8788
Flexible Metal Conduit Assembly

015488788
5493230-014: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-01-660-8957
Flexible Metal Conduit

016608957
651-4694-001: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-660-0417
Electrical Conduit Union

016600417
419396-1: RNCC: 3 | RNVC: 2

3 Jan 2017

5975-01-306-3889
Electrical-Electronic Equipment Chassis

013063889
19C327121G1: RNCC: 3 | RNVC: 2

23 Aug 1989

5975-01-305-8931
Electrical Box Connector

013058931
6-978-990114: RNCC: 3 | RNVC: 2

12 Aug 1989

5975-00-732-4175
Conduit Outlet

007324175
2512: RNCC: 3 | RNVC: 9
2512: RNCC: C | RNVC: 1

1 Jan 1961

5975-00-893-9612
Conduit Outlet

008939612
FSS2: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-582-7829
Electrical-Electronic Equipment Chassis

015827829
ACP-4000MB-00XE: RNCC: 3 | RNVC: 2

8 Mar 2010

5975-01-548-7158
Electronic Equipment Mounting Tray

015487158
UHK21222-1: RNCC: 3 | RNVC: 2

1 Mar 2007

5975-01-548-8702
Electrical Tie Down Mounting Base

015488702
7521131: RNCC: 3 | RNVC: 2
7521131: RNCC: 5 | RNVC: 2

6 Mar 2007

5975-01-659-3110
Electrical-Electronic Equipment Chassis

016593110
JG402A: RNCC: 3 | RNVC: 2
JG402A: RNCC: 3 | RNVC: 9

17 Nov 2016

5975-01-501-7310
Electrical Conductor Bushing

015017310
640-015NF0308: RNCC: 3 | RNVC: 2

11 Oct 2002

5975-01-468-3706
Electrical-Electronic Equipment Chassis

014683706
DE100I-SW/B: RNCC: 3 | RNVC: 9

7 Oct 1999

5975-01-534-7575
Electrical-Electronic Equipment Chassis

015347575
22-12167-01: RNCC: 3 | RNVC: 9
2T-BA350-SF: RNCC: 5 | RNVC: 2

1 Nov 2005

5975-01-468-9254
Flexible Metal Conduit Assembly

014689254
254713: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-00-826-4206
Conduit Outlet

008264206
T448: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-01-658-5290
Electrical Nonmetallic Conduit Assembly

016585290
172A1376-054: RNCC: 1 | RNVC: 2
252563-0054: RNCC: 3 | RNVC: 2
23A02976-054: RNCC: 3 | RNVC: 2
172A1376: RNCC: D | RNVC: 9

30 Sep 2016

5975-01-499-5175
Electrical Equipment Mounting Base

014995175
CB9132: RNCC: 3 | RNVC: 2
715973/AT5181A919: RNCC: 5 | RNVC: 2

25 Jul 2002

5975-01-475-2537
Electrical-Electronic Equipment Panel

014752537
03-07359-001: RNCC: 3 | RNVC: 2

26 May 2000

5975-01-477-1019
Guide Rail

014771019
5261004-2: RNCC: 3 | RNVC: 2

31 Jul 2000

5975-01-533-3966
Electrical-Electronic Equipment Chassis

015333966
CHASSIS 7507: RNCC: 3 | RNVC: 2

13 Sep 2005

5975-01-469-2001
Junction Box

014692001
01628-100: RNCC: 3 | RNVC: 9

5 Nov 1999

5975-01-649-5908
Guide Rail

016495908
001751 130 00: RNCC: 3 | RNVC: 9

4 Nov 2015

5975-01-580-5490
Electrical-Electronic Equipment Chassis

015805490
CCA-4UDC003: RNCC: 3 | RNVC: 2

17 Dec 2009

5975-01-581-2803
Electrical-Electronic Equipment Chassis

015812803
N5K-C5010P-BF: RNCC: 3 | RNVC: 2
N5K-C5010P-BF: RNCC: 5 | RNVC: 2

12 Jan 2010

5975-01-581-2712
Electrical Equipment Rack

015812712
RX1880-4: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-582-0232
Cable Marker Sleeve

015820232
TMS-SCE-1/2-2.0-S1-9: RNCC: 3 | RNVC: 2
TMS-SCE-1/2-2.0-S1-9: RNCC: 5 | RNVC: 2

4 Feb 2010

5975-01-547-5169
Electrical Equipment Shelf

015475169
70207-24010-051: RNCC: 3 | RNVC: 2

23 Jan 2007

5975-01-657-6372
Mounting Plate

016576372
39278-40121-2: RNCC: 3 | RNVC: 2

23 Aug 2016

5975-01-657-7652
Mounting Plate

016577652
39278-40122-4: RNCC: 3 | RNVC: 2

29 Aug 2016

5975-01-657-1234
Electrical-Electronic Equipment Chassis

016571234
UCS-SPM-MINI: RNCC: 3 | RNVC: 2

29 Jul 2016

5975-01-657-6325
Mounting Plate

016576325
39278-40122-1: RNCC: 3 | RNVC: 2

23 Aug 2016

5975-01-657-6355
Mounting Plate

016576355
39278-40121-1: RNCC: 3 | RNVC: 2

23 Aug 2016

5975-01-581-6418
Electrical Bonding Ring

015816418
SL4243C7C: RNCC: 3 | RNVC: 2
SL4243C7C: RNCC: 3 | RNVC: 9

23 Jan 2010

5975-01-582-7190
Electrical Equipment Rack

015827190
5063-9217: RNCC: 3 | RNVC: 2
5063-9217: RNCC: 3 | RNVC: 9

3 Mar 2010

Load More Results