What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 157 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 157 of 176

5975-01-469-1968
Cable Marker Sleeve

014691968
TMS-SCE-3/8-2.0-S1-4: RNCC: 3 | RNVC: 2
ECS6036FN4: RNCC: 5 | RNVC: 2
TMS-SCE-3/8-2.0-S1-4: RNCC: 5 | RNVC: 2
TMS-SCE-3/8-2.0-S1-4: RNCC: 5 | RNVC: 2

5 Nov 1999

5975-01-430-1028
Cable Marker Sleeve

014301028
N13714-050-013: RNCC: 3 | RNVC: 2

23 Apr 1996

5975-01-355-6245
Electrical Components Tie Down Strap

013556245
TY35M-X: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-01-549-7293
Electrical-Electronic Equipment Chassis

015497293
1001283G-23: RNCC: 3 | RNVC: 2

28 Mar 2007

5975-01-617-0140
Clutch Panel Assembly

016170140
040706-644: RNCC: 3 | RNVC: 2

6 Mar 2013

5975-01-617-4974
Stuffing Tube

016174974
RG00063090046: RNCC: 3 | RNVC: 2

25 Mar 2013

5975-01-465-6827
Electrical-Electronic Equipment Chassis

014656827
3C16071-ME: RNCC: 3 | RNVC: 2

17 Jun 1999

5975-01-466-2035
Electrical Equipment Mounting Base

014662035
419585-99: RNCC: 3 | RNVC: 2
419585-99: RNCC: 3 | RNVC: 9

9 Jul 1999

5975-01-468-0610
Shelf

014680610
7-511171036-29: RNCC: 3 | RNVC: 2

27 Sep 1999

5975-01-353-0790
Electrical Components Tie Down Strap

013530790
1106124-03: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-352-0871
Electrical-Electronic Equipment Panel

013520871
VMIVME-4920-02-17: RNCC: 3 | RNVC: 2
L76574-03631: RNCC: 5 | RNVC: 2

19 Jan 1992

5975-01-615-9163
Electrical Components Tie Down Strap

016159163
MS3367-4-0: RNCC: 3 | RNVC: 2

28 Jan 2013

5975-01-616-2236
Electrical-Electronic Equipment Chassis

016162236
ZCA596: RNCC: 3 | RNVC: 2
ZCA596: RNCC: 3 | RNVC: 9

6 Feb 2013

5975-01-615-8453
Electrical Cable Nipple

016158453
MS25171-4: RNCC: 2 | RNVC: 2

24 Jan 2013

5975-01-465-7238
Electrical Wall Plate

014657238
7-511115146-1: RNCC: 3 | RNVC: 2

18 Jun 1999

5975-01-465-6886
Electrical-Electronic Equipment Chassis

014656886
WS-C5505: RNCC: 3 | RNVC: 2

17 Jun 1999

5975-01-465-8830
Cable Marker Sleeve

014658830
13076094-2: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-01-466-4290
Mounting Rail

014664290
R378336-01: RNCC: 3 | RNVC: 2

19 Jul 1999

5975-01-348-5739
Electrical-Electronic Equipment Chassis

013485739
1583574-1: RNCC: 3 | RNVC: 2

13 Nov 1991

5975-01-349-7524
Electrical-Electronic Equipment Chassis

013497524
RR37401: RNCC: 3 | RNVC: 2

3 Dec 1991

5975-01-548-0840
Electrical-Electronic Equipment Chassis

015480840
N115204: RNCC: 3 | RNVC: 2
DS320-2 160/B: RNCC: 5 | RNVC: 9
IS DS320-2-160/B: RNCC: 5 | RNVC: 9

8 Feb 2007

5975-01-468-9238
Flexible Metal Conduit Assembly

014689238
254726: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-346-1270
Conduit Outlet Cover

013461270
PC-3/4-PL: RNCC: 3 | RNVC: 2

27 Sep 1991

5975-01-547-4301
Electrical Equipment Cabinet

015474301
BA355: RNCC: 3 | RNVC: 2

19 Jan 2007

5975-01-380-5547
Electrical Box Connector

013805547
15000020: RNCC: 3 | RNVC: 2

21 Sep 1993

5975-01-105-0793
Pie Cabinet

011050793
57977-40155: RNCC: 3 | RNVC: 2

17 Dec 1980

5975-01-108-8974
Electrical Equipment Mounting Base

011088974
622-5662-001: RNCC: 3 | RNVC: 2

7 Mar 1981

5975-01-546-5572
Electrical Equipment Rack

015465572
5102815-2: RNCC: 3 | RNVC: 2

20 Dec 2006

5975-01-546-9084
Electrical-Electronic Equipment Chassis

015469084
C7206VXR/400/GE: RNCC: 3 | RNVC: 2

8 Jan 2007

5975-01-179-4668
Electrical-Electronic Equipment Panel

011794668
0N315114-502: RNCC: 3 | RNVC: 2

18 May 1984

5975-01-545-7176
Electrical Equipment Rack

015457176
ACF002: RNCC: 3 | RNVC: 2
VCH115350P01: RNCC: 5 | RNVC: 2

22 Nov 2006

5975-01-376-3126
Interconnecting Box

013763126
DAA3233A300-009: RNCC: 3 | RNVC: 2

29 May 1993

5975-01-376-3823
Insulator Bracket

013763823
922396-1: RNCC: 3 | RNVC: 2

2 Jun 1993

5975-01-545-3582
Electrical-Electronic Equipment Chassis

015453582
SUNPS-3PP/CVPN3030-NR-BUN: RNCC: 3 | RNVC: 2

9 Nov 2006

5975-01-545-3585
Electrical Equipment Rack

015453585
AF001A(HP RAF 10642 G2): RNCC: 3 | RNVC: 2

9 Nov 2006

5975-01-545-2492
Junction Box

015452492
227267-F500000A: RNCC: 3 | RNVC: 2

6 Nov 2006

5975-01-476-7472
Guide Rail

014767472
5260010-2: RNCC: 3 | RNVC: 2

20 Jul 2000

5975-01-381-0696
Electrical-Electronic Equipment Chassis

013810696
13029710-201: RNCC: 3 | RNVC: 2

7 Oct 1993

5975-01-375-2802
Electrical-Electronic Equipment Panel

013752802
68732-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-104-2672
Electrical Conductor Bushing

011042672
0N519053: RNCC: 3 | RNVC: 2

2 Dec 1980

5975-01-543-6200
Electrical Equipment Rack

015436200
AMSMCCS06: RNCC: 3 | RNVC: 2

18 Sep 2006

5975-01-544-1140
Electrical-Electronic Equipment Panel

015441140
301023-1: RNCC: 3 | RNVC: 2

2 Oct 2006

5975-01-544-2369
Junction Box

015442369
211425: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-472-9988
Electrical Cable Nipple

014729988
96314: RNCC: 3 | RNVC: 2

23 Mar 2000

5975-01-471-5893
Ca Feinforcing Link

014715893
H78-0004-312: RNCC: 3 | RNVC: 2

7 Feb 2000

5975-01-415-4283
Insulator Bracket Strap

014154283
SST2S0: RNCC: 3 | RNVC: 2
SST2S0: RNCC: 5 | RNVC: 9

27 Jun 1995

5975-01-100-4896
Electrical-Electronic Equipment Chassis

011004896
326100-2: RNCC: 3 | RNVC: 2
326100-2: RNCC: 5 | RNVC: 9
326100-2: RNCC: 8 | RNVC: 2

7 Sep 1980

5975-01-393-9731
Raceway Cover

013939731
80-6101-2986-0: RNCC: 3 | RNVC: 9
7000057821: RNCC: C | RNVC: 1

30 Jul 1994

5975-01-394-1135
Electrical Equipment Drawer

013941135
7004404: RNCC: 3 | RNVC: 2
7004404: RNCC: 5 | RNVC: 9

2 Aug 1994

5975-01-393-2968
Electrical-Electronic Equipment Chassis

013932968
174D1585G1: RNCC: 3 | RNVC: 2

18 Jul 1994

5975-01-469-7412
Electrical Equipment Cabinet

014697412
380583-B21: RNCC: 3 | RNVC: 2

22 Nov 1999

5975-01-471-0438
Guide Rail

014710438
044081: RNCC: 3 | RNVC: 2
985B044081: RNCC: 5 | RNVC: 9

20 Jan 2000

5975-01-393-6279
Electrical Conduit Nipple

013936279
GRIG12XCL: RNCC: 3 | RNVC: 9

23 Jul 1994

5975-01-632-8094
Electrical Equipment Cabinet

016328094
096857: RNCC: 3 | RNVC: 2

30 Oct 2014

5975-01-632-6223
Electronic Junction Rack

016326223
420-017: RNCC: 3 | RNVC: 2
420-017: RNCC: 5 | RNVC: 2

24 Oct 2014

5975-01-632-6540
Electrical Equipment Rack

016326540
097660: RNCC: 3 | RNVC: 2

27 Oct 2014

5975-01-633-1597
Electrical-Electronic Equipment Chassis

016331597
CB39205-001: RNCC: 3 | RNVC: 2
40082107: RNCC: 5 | RNVC: 2

12 Nov 2014

5975-01-305-5935
Window

013055935
623-9665-001: RNCC: 3 | RNVC: 2

8 Aug 1989

5975-01-392-3148
Electrical Components Tie Down Strap

013923148
TY28M-9: RNCC: 3 | RNVC: 2

27 Jun 1994

5975-01-631-7174
Inte Server Blade

016317174
09205209-01: RNCC: 3 | RNVC: 1
SB-ATCA7300G96: RNCC: 5 | RNVC: 9

23 Sep 2014

5975-01-632-0678
Electrical Equipment Mounting Base

016320678
RF-5871-VM011: RNCC: 3 | RNVC: 2
RF-5871-VM011: RNCC: 5 | RNVC: 2

7 Oct 2014

5975-01-633-1603
Electrical-Electronic Equipment Chassis

016331603
CB39206-001: RNCC: 3 | RNVC: 2
40082112: RNCC: 5 | RNVC: 2

12 Nov 2014

5975-01-632-9016
Cable Splice Block

016329016
SBA10682: RNCC: 3 | RNVC: 2
15487313: RNCC: 5 | RNVC: 2

3 Nov 2014

5975-01-632-6177
Junction Box

016326177
VM776CT: RNCC: 3 | RNVC: 2

24 Oct 2014

5975-01-301-0046
Pe Controller

013010046
1663626-116: RNCC: 3 | RNVC: 2

23 May 1989

5975-01-410-9145
Electrical Equipment Mounting Base

014109145
2722-0203-2: RNCC: 3 | RNVC: 2
2722-0203-2: RNCC: 5 | RNVC: 9

15 Mar 1995

5975-01-412-5328
Junction Box

014125328
RVWB19: RNCC: 3 | RNVC: 9
00034481033479: RNCC: 5 | RNVC: 9

20 Apr 1995

5975-01-422-9698
Electrical Conductor Bushing

014229698
03408208: RNCC: 3 | RNVC: 2
03408208: RNCC: 5 | RNVC: 9

12 Dec 1995

5975-01-388-8158
Electrical Equipment Cabinet

013888158
11271-1: RNCC: 3 | RNVC: 2

8 Apr 1994

5975-01-170-6736
Junction Box

011706736
1536014-001: RNCC: 3 | RNVC: 2
1536014-001: RNCC: 3 | RNVC: 9

27 Jan 1984

5975-01-421-0978
Blank Panel

014210978
7596259P1: RNCC: 3 | RNVC: 2

1 Nov 1995

5975-01-630-5558
Electrical-Electronic Equipment Chassis

016305558
2853403-1: RNCC: 3 | RNVC: 2
2853403: RNCC: D | RNVC: 9

8 Aug 2014

5975-01-629-9690
Electrical Box Connector

016299690
SHC1023ZP: RNCC: 3 | RNVC: 2

21 Jul 2014

5975-01-169-6631
Electrical Components Tie Down Strap

011696631
10S300-2-222: RNCC: 3 | RNVC: 9
10S300-2-222: RNCC: C | RNVC: 1

12 Jan 1984

5975-01-463-3516
Electrical-Electronic Equipment Chassis

014633516
204-92046-2: RNCC: 3 | RNVC: 2

17 Mar 1999

5975-01-462-8756
Electrical Equipment Rack

014628756
40374-01212: RNCC: 3 | RNVC: 2
1261B-9U-MS: RNCC: 5 | RNVC: 2

23 Feb 1999

5975-01-416-5911
Rigid Metal Conduit

014165911
COML: RNCC: 3 | RNVC: 2

21 Jul 1995

5975-01-417-2996
Electrical-Electronic Equipment Chassis

014172996
152875-3: RNCC: 3 | RNVC: 2

4 Aug 1995

5975-01-418-0376
Cable Hanger

014180376
17P1E1045-24: RNCC: 3 | RNVC: 2

18 Aug 1995

5975-01-629-2085
Electrical Equipment Rack

016292085
VNXBRACK-40U: RNCC: 3 | RNVC: 2
VNXBRACK-40U: RNCC: 5 | RNVC: 2

23 Jun 2014

5975-01-461-3117
Electrical Equipment Rack

014613117
J1487B: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-629-1328
Electrical-Electronic Equipment Chassis

016291328
12V21OZX88N6TCL2-ARG2: RNCC: 3 | RNVC: 2

19 Jun 2014

5975-01-628-9975
Electrical-Electronic Equipment Chassis

016289975
778646-01: RNCC: 3 | RNVC: 2

17 Jun 2014

5975-01-459-2639
Electrical-Electronic Equipment Chassis

014592639
8697-1407-01: RNCC: 3 | RNVC: 2

25 Sep 1998

5975-01-457-8254
Electrical-Electronic Equipment Chassis

014578254
HM021-082-11: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-415-2869
Electrical-Electronic Equipment Chassis

014152869
8500717: RNCC: 3 | RNVC: 2

23 Jun 1995

5975-01-627-8999
Raceway Cover

016278999
HBLTT5B: RNCC: 3 | RNVC: 2

1 May 2014

5975-01-627-3922
Electrical Tie Down Mounting Base

016273922
279-044: RNCC: 3 | RNVC: 2

11 Apr 2014

5975-01-627-3877
Electrical Equipment Cabinet

016273877
G1-62-3000: RNCC: 3 | RNVC: 2

11 Apr 2014

5975-01-627-1988
Electrical Equipment Rack

016271988
ASP-TTSBU-900: RNCC: 3 | RNVC: 2

4 Apr 2014

5975-01-454-0610
Electrical Tie Down Mounting Base

014540610
CB4020V3N12: RNCC: 3 | RNVC: 2
9D0271-103: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-01-326-6204
Electrical Cable Protector

013266204
3491234: RNCC: 3 | RNVC: 2

27 Sep 1990

5975-01-627-7065
Prom Flash

016277065
216C9881VER2.0.1.08: RNCC: 3 | RNVC: 1

24 Apr 2014

5975-01-154-5435
Junction Box

011545435
131C837H01: RNCC: 3 | RNVC: 2
131C837H01: RNCC: 3 | RNVC: 9

26 May 1983

5975-01-326-6201
Electrical Cable Protector

013266201
3491229: RNCC: 3 | RNVC: 2

27 Sep 1990

5975-01-408-2678
Electrical Equipment Cabinet

014082678
93-03010-001: RNCC: 3 | RNVC: 2
CY7929V1WSC6V: RNCC: 3 | RNVC: 2

13 Feb 1995

5975-01-408-0019
Electrical Components Tie Down Strap

014080019
A401-1: RNCC: 3 | RNVC: 2

8 Feb 1995

5975-01-626-2646
Electrical-Electronic Equipment Chassis

016262646
MRR-16: RNCC: 3 | RNVC: 2

4 Mar 2014

5975-01-625-7966
Nonmetallic Raceway

016257966
M0DREF346869: RNCC: 3 | RNVC: 2

14 Feb 2014

5975-01-626-3750
Blank Panel

016263750
734-65228-1: RNCC: 3 | RNVC: 2
734-65228: RNCC: D | RNVC: 9

7 Mar 2014

5975-01-124-2225
Electrical Components Tie Down Strap

011242225
10S300-2-61: RNCC: 3 | RNVC: 9
10S300-2-61: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-316-3649
Switch Terminal Cover

013163649
7910904: RNCC: 3 | RNVC: 2

8 Mar 1990

5975-01-317-6016
Electrical-Electronic Equipment Panel

013176016
888-8693-3: RNCC: 3 | RNVC: 2
888-8693-3: RNCC: 5 | RNVC: 9

1 Apr 1990

5975-01-317-6840
Cable Marker Sleeve

013176840
SS7026-475: RNCC: 3 | RNVC: 2

4 Apr 1990

5975-01-625-0932
Electrical Components Tie Down Strap

016250932
8973048A: RNCC: 3 | RNVC: 2

24 Jan 2014

5975-01-397-4821
Flexible Metal Conduit

013974821
1310-0101-2: RNCC: 3 | RNVC: 2
1310-0101-2: RNCC: 5 | RNVC: 9

12 Oct 1994

5975-01-122-3448
Electrical Components Tie Down Strap

011223448
10S300-1-51: RNCC: 3 | RNVC: 9
10S300-1-51: RNCC: C | RNVC: 1

19 Nov 1981

5975-01-124-4590
Electrical Equipment Mounting Base

011244590
16F2261-69: RNCC: 3 | RNVC: 2
16F2261-65: RNCC: 5 | RNVC: 9

5 Jan 1982

5975-01-623-3666
Radio Frequency Cable Splicing Kit

016233666
GKT-158SG: RNCC: 3 | RNVC: 2

8 Nov 2013

5975-01-624-2763
Metallic Raceway

016242763
80038800033: RNCC: 3 | RNVC: 9

20 Dec 2013

5975-01-624-6849
Electrical-Electronic Equipment Chassis

016246849
IPC-615P7/300: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-397-1338
Electrical Equipment Rack

013971338
MT6917FSQ131: RNCC: 3 | RNVC: 2
290-118917-01: RNCC: 3 | RNVC: 2

4 Oct 1994

5975-01-394-8756
Electrical-Electronic Equipment Chassis

013948756
ISBC661-1: RNCC: 3 | RNVC: 2

17 Aug 1994

5975-01-369-0094
Electrical Equipment Rack Base

013690094
61212: RNCC: 3 | RNVC: 2

13 Dec 1992

5975-01-310-2922
Electrical-Electronic Equipment Panel

013102922
951-1651: RNCC: 3 | RNVC: 2
951-1651: RNCC: 3 | RNVC: 9
ASC1528476: RNCC: 5 | RNVC: 9
9159/9220: RNCC: 5 | RNVC: 9
9159/9221: RNCC: 5 | RNVC: 9
9159/9220: RNCC: 5 | RNVC: 9
9159/9221: RNCC: 5 | RNVC: 9

2 Nov 1989

5975-01-622-4773
Electrical Cable Protector

016224773
220673: RNCC: 3 | RNVC: 2

9 Oct 2013

5975-01-394-2879
Electrical Conduit Nipple

013942879
004-2-XX002-D1-1: RNCC: 3 | RNVC: 2
004-2-XX002-D1-1: RNCC: 3 | RNVC: 9
HP-004-2-XX002-D1-1: RNCC: 5 | RNVC: 9
004-2-XX002-D1-1: RNCC: 5 | RNVC: 9

6 Aug 1994

5975-01-392-5967
Switch Box Case

013925967
6374687: RNCC: 3 | RNVC: 2

1 Jul 1994

5975-01-393-0125
Guide Cable

013930125
14200675: RNCC: 3 | RNVC: 2

12 Jul 1994

5975-01-362-4734
Electrical-Electronic Equipment Panel

013624734
921102145-001: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-365-1840
Electrical-Electronic Equipment Chassis

013651840
1974AS399-1: RNCC: 3 | RNVC: 2

2 Oct 1992

5975-01-672-8940
Electrical Equipment Rack

016728940
16E1713-27: RNCC: 3 | RNVC: 2

22 May 2018

5975-01-306-6235
Electrical-Electronic Equipment Chassis

013066235
19D424309G5: RNCC: 3 | RNVC: 2

27 Aug 1989

5975-01-621-9446
Electrical Equipment Rack

016219446
AM338A: RNCC: 3 | RNVC: 2

23 Sep 2013

5975-01-394-2771
Electrical-Electronic Equipment Chassis

013942771
8905814-303: RNCC: 3 | RNVC: 2
8905814-303: RNCC: 3 | RNVC: 9

6 Aug 1994

5975-01-381-9064
Electrical-Electronic Equipment Chassis

013819064
17910482020: RNCC: 3 | RNVC: 2

23 Oct 1993

5975-01-381-8714
Electrical-Electronic Equipment Chassis

013818714
4205437Q01: RNCC: 3 | RNVC: 9

23 Oct 1993

5975-01-358-9928
Electrical Conduit Adapter

013589928
710AS002B2212: RNCC: 3 | RNVC: 2
710AS002B22-12: RNCC: 5 | RNVC: 2

27 May 1992

5975-01-360-6792
Blank Panel

013606792
A523A425-101: RNCC: 3 | RNVC: 2
A523A425-101: RNCC: 5 | RNVC: 2

29 Jun 1992

5975-01-252-6722
Stuffing Tube

012526722
M19622/14-009: RNCC: 4 | RNVC: 1
MIL-S-19622: RNCC: 5 | RNVC: 1

5 Apr 1987

5975-01-673-9365
Electrical Equipment Cabinet

016739365
N8822B: RNCC: 3 | RNVC: 2

5 Jul 2018

5975-01-674-0337
Electrical Equipment Cabinet

016740337
S6512B: RNCC: 3 | RNVC: 2

10 Jul 2018

5975-01-302-1772
Blank Panel

013021772
4007779-0501: RNCC: 3 | RNVC: 2

10 Jun 1989

5975-01-303-6762
Electrical Components Tie Down Strap

013036762
696-40527-0: RNCC: 3 | RNVC: 2
696-40527-0-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-306-4701
Electrical-Electronic Equipment Chassis

013064701
204-56238-1: RNCC: 3 | RNVC: 2

25 Aug 1989

5975-01-306-8194
Blank Panel

013068194
19D432007G3: RNCC: 3 | RNVC: 2

30 Aug 1989

5975-01-377-7921
Blank Panel

013777921
016-0195-05: RNCC: 3 | RNVC: 2
016-0195-05: RNCC: 5 | RNVC: 2

27 Jul 1993

5975-01-230-9178
Ground Rod

012309178
251176: RNCC: 3 | RNVC: 9

19 Apr 1986

5975-01-618-7661
Electrical Standardized Components Case

016187661
BLACKBOX-14U: RNCC: 3 | RNVC: 2

6 May 2013

5975-01-179-7727
Electrical-Electronic Equipment Panel

011797727
0N315114-503: RNCC: 3 | RNVC: 2

21 May 1984

5975-01-379-3850
Electrical Conduit Sealing Fitting

013793850
13615-899-1: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-375-2796
Electrical-Electronic Equipment Panel

013752796
68726-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-369-8057
Electrical Equipment Rack

013698057
04682-00-001: RNCC: 3 | RNVC: 9

7 Jan 1993

5975-01-369-9014
Electrical Equipment Cabinet

013699014
CU-2111B: RNCC: 3 | RNVC: 2

8 Jan 1993

5975-01-354-9228
Electrical-Electronic Equipment Panel

013549228
3661869-2: RNCC: 3 | RNVC: 2

7 Mar 1992

5975-01-304-3815
Conduit Outlet

013043815
710-M006N03: RNCC: 3 | RNVC: 2

18 Jul 1989

5975-01-371-5510
Electrical Equipment Rack

013715510
11468774: RNCC: 3 | RNVC: 2

18 Feb 1993

5975-01-371-7357
Va Wireway Assy

013717357
P69383-5: RNCC: 3 | RNVC: 9

22 Feb 1993

5975-01-543-2161
Bearing Sp Retainer

015432161
2786145-1: RNCC: 3 | RNVC: 2

1 Sep 2006

5975-01-132-6177
Load Center Marker

011326177
PCMB-LC: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-01-348-5832
Electrical-Electronic Equipment Chassis

013485832
4044138-0502: RNCC: 3 | RNVC: 2

13 Nov 1991

5975-01-144-8132
Conduit Outlet

011448132
E985E: RNCC: 3 | RNVC: 9

30 Dec 1982

5975-01-367-4158
Electrical-Electronic Equipment Chassis

013674158
171452G01: RNCC: 3 | RNVC: 2

11 Nov 1992

5975-01-541-6867
Electrical Cable Nipple

015416867
APCD24006BSPT: RNCC: 3 | RNVC: 2

6 Jul 2006

5975-01-128-7956
Module Hold Down

011287956
202530: RNCC: 3 | RNVC: 2
202530: RNCC: 5 | RNVC: 9

26 Mar 1982

5975-01-346-8143
Blank Panel

013468143
DAA3233A473-005: RNCC: 3 | RNVC: 2

10 Oct 1991

5975-01-188-0232
Electrical Components Tie Down Strap

011880232
MS3367-5-4: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1
MS3367-5-4: RNCC: 5 | RNVC: 2
5975PL0209938: RNCC: 6 | RNVC: 9

29 Aug 1984

5975-01-128-0813
Dial Assy

011280813
500418: RNCC: 3 | RNVC: 2
500418: RNCC: 5 | RNVC: 9

11 Mar 1982

5975-01-342-6040
Cable Marker Sleeve

013426040
651036-131: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-343-7599
Cable Retainer

013437599
8511-62-00: RNCC: 3 | RNVC: 2

16 Aug 1991

5975-01-105-3307
Stuffing Tube

011053307
3915180-5001: RNCC: 3 | RNVC: 2

20 Dec 1980

5975-01-538-9884
Electrical-Electronic Equipment Chassis

015389884
221-8101: RNCC: 3 | RNVC: 2

6 Apr 2006

5975-00-957-2800
Conduit Outlet

009572800
C017: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-900-7177
Conduit Outlet

009007177
ARE13: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-360-7005
Electrical Conduit Elbow

013607005
77C718713P003: RNCC: 3 | RNVC: 2

29 Jun 1992

5975-01-538-7211
Elec Condui Adapter

015387211
HF1001887: RNCC: 3 | RNVC: 2

29 Mar 2006

5975-01-537-7641
Electrical Components Tie Down Strap

015377641
54-41582-7: RNCC: 3 | RNVC: 2
54 41582Q 7: RNCC: 5 | RNVC: 2
54-41582-7: RNCC: 5 | RNVC: 2
54-41582-7: RNCC: 5 | RNVC: 2
54 41582Q7: RNCC: 5 | RNVC: 2

23 Feb 2006

5975-01-537-9423
Electrical Equipment Rack Base

015379423
211-1892-01: RNCC: 3 | RNVC: 2

3 Mar 2006

5975-01-537-8810
Electrical Equipment Rack

015378810
SR9-XKM038A-IP: RNCC: 3 | RNVC: 2
SUN-RACK 900-38 XKM: RNCC: 5 | RNVC: 2

1 Mar 2006

5975-01-538-1162
Electrical Components Tie Down Strap

015381162
18480: RNCC: 3 | RNVC: 9
18480: RNCC: C | RNVC: 1

10 Mar 2006

5975-01-538-3343
Electrical-Electronic Equipment Chassis

015383343
SG10233-1-2: RNCC: 3 | RNVC: 2

17 Mar 2006

5975-01-181-1081
Junction Box

011811081
0N329622-1: RNCC: 3 | RNVC: 2

6 Jun 1984

5975-01-669-8246
Electrical-Electronic Equipment Chassis

016698246
VOY-CHAS1-R1.0S: RNCC: 3 | RNVC: 2

23 Jan 2018

5975-01-672-0213
Electrical-Electronic Equipment Chassis

016720213
28002-M5: RNCC: 3 | RNVC: 2

19 Apr 2018

5975-01-671-9100
Electrical Equipment Rack

016719100
P9K05A: RNCC: 3 | RNVC: 2

16 Apr 2018

5975-01-670-8147
Electrical Equipment Shelf

016708147
7-511115140-3: RNCC: 3 | RNVC: 2

7 Mar 2018

5975-01-204-0934
Electrical Equipment Drawer

012040934
1047580G2: RNCC: 3 | RNVC: 2

22 Mar 1985

5975-01-198-1453
Gauge Tube

011981453
026-02619: RNCC: 3 | RNVC: 2
26-2619: RNCC: 5 | RNVC: 9

5 Jan 1985

5975-01-198-3584
Gauge

011983584
026-09098: RNCC: 3 | RNVC: 2
26-9098: RNCC: 5 | RNVC: 9

7 Jan 1985

5975-01-204-9325
Stuffing Tube

012049325
G1343B4B: RNCC: 3 | RNVC: 2

2 Apr 1985

5975-01-210-8130
Conduit Outlet

012108130
FDCC-1-100: RNCC: 3 | RNVC: 2
033823-0003: RNCC: 5 | RNVC: 2

18 Jun 1985

5975-01-144-5060
Electrical Equipment Rack

011445060
806422-1: RNCC: 3 | RNVC: 2

21 Dec 1982

5975-01-432-6529
Flexible Metal Conduit Assembly

014326529
10250675-94: RNCC: 3 | RNVC: 2
750-011NF32-182: RNCC: 5 | RNVC: 2
200188-D11820: RNCC: 5 | RNVC: 2

11 Jun 1996

5975-01-359-3986
Electrical Conduit Locknut

013593986
E5735-2E: RNCC: 3 | RNVC: 2
E5735-2E: RNCC: 5 | RNVC: 9

5 Jun 1992

5975-01-359-6061
Electrical Conduit Coupling

013596061
77C717355P002: RNCC: 3 | RNVC: 2

10 Jun 1992

5975-01-536-0149
Junction Box

015360149
BPG10: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-01-536-0332
Electronic Equipment Mounting Tray

015360332
242-0846-082: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-01-536-6420
Electrical-Electronic Equipment Panel

015366420
345D778G01: RNCC: 3 | RNVC: 2
345D778G01: RNCC: 3 | RNVC: 9

10 Jan 2006

5975-01-536-1799
Flexible Metal Conduit Assembly

015361799
227708-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-537-2476
Electrical-Electronic Equipment Chassis

015372476
DS-C9216-K9: RNCC: 3 | RNVC: 2
MDS 9216: RNCC: 5 | RNVC: 2

31 Jan 2006

5975-01-537-5575
Electrical-Electronic Equipment Chassis

015375575
WS-C6503-E: RNCC: 3 | RNVC: 2

13 Feb 2006

5975-01-079-5578
Electrical-Electronic Equipment Chassis

010795578
887832-2: RNCC: 3 | RNVC: 2
887832-2: RNCC: 8 | RNVC: 2

8 Jul 1979

5975-01-666-9945
Electrical-Electronic Equipment Panel

016669945
3353561-3: RNCC: 3 | RNVC: 2

28 Sep 2017

5975-01-668-9466
Electrical-Electronic Equipment Panel

016689466
712983-2: RNCC: 3 | RNVC: 2

13 Dec 2017

5975-01-668-2912
Electrical Tie Down Mounting Base

016682912
298-1116-ND: RNCC: 3 | RNVC: 2

16 Nov 2017

5975-01-668-8069
Electrical Equipment Rack

016688069
KVM-RAC-1: RNCC: 3 | RNVC: 2

8 Dec 2017

5975-01-669-6490
Electrical Conduit Locknut

016696490
7680K29: RNCC: 3 | RNVC: 2

18 Jan 2018

5975-01-669-2305
Junction Box Assembly

016692305
724E2112-8: RNCC: 3 | RNVC: 2

29 Dec 2017

5975-01-668-0539
Harness Board Start

016680539
QB-KIT1: RNCC: 3 | RNVC: 2

8 Nov 2017

5975-01-487-4180
Electrical Components Tie Down Strap

014874180
45331: RNCC: 3 | RNVC: 2

6 Aug 2001

5975-01-495-5945
Electrical-Electronic Equipment Chassis

014955945
0003795: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-01-431-0819
Electrical-Electronic Equipment Chassis

014310819
AT-36C8: RNCC: 3 | RNVC: 2

7 May 1996

5975-01-535-3958
Cable Marker Sleeve

015353958
M235A774-159: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-536-0153
Electrical-Electronic Equipment Chassis

015360153
DS100-S1W: RNCC: 3 | RNVC: 9

16 Dec 2005

5975-01-536-1798
Flexible Metal Conduit Assembly

015361798
227703-DL0000: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-664-8730
Blank Panel

016648730
009271-1: RNCC: 3 | RNVC: 2

10 Jul 2017

5975-01-666-0837
Electrical Equipment Mounting Base

016660837
16VE100201-20: RNCC: 3 | RNVC: 2

23 Aug 2017

5975-01-666-6270
Electrical Cable Protector

016666270
LS35471EFG: RNCC: 3 | RNVC: 2

14 Sep 2017

5975-01-665-3017
Fanning Strip

016653017
17P2E2037-1: RNCC: 3 | RNVC: 2

24 Jul 2017

5975-01-666-5476
Transmission Line Grounding Set

016665476
241088-3: RNCC: 3 | RNVC: 2

12 Sep 2017

5975-01-666-3977
Electrical Cable Protector

016663977
INV14949: RNCC: 3 | RNVC: 2

6 Sep 2017

5975-01-666-8882
Electrical Conduit Elbow

016668882
52005420: RNCC: 3 | RNVC: 2

26 Sep 2017

5975-01-667-0258
Cable Retainer

016670258
DSI-160-6588CD: RNCC: 3 | RNVC: 2

29 Sep 2017

5975-01-666-5353
Electrical-Electronic Equipment Panel

016665353
3358943-13: RNCC: 3 | RNVC: 2

11 Sep 2017

5975-01-429-5889
Electrical Equipment Rack

014295889
808-401-9: RNCC: 3 | RNVC: 2

15 Apr 1996

5975-01-156-7838
Electrical Equipment Mounting Base

011567838
03-512253-1: RNCC: 3 | RNVC: 2
622-0182-002: RNCC: 5 | RNVC: 9
622-0182-001: RNCC: 5 | RNVC: 9

24 Jun 1983

5975-01-055-7761
Electrical Conductor Bushing

010557761
K-437-187: RNCC: 3 | RNVC: 2

11 Feb 1978

5975-01-061-9832
Junction Box

010619832
600: RNCC: 3 | RNVC: 2
CX: RNCC: 5 | RNVC: 9

7 Jul 1978

5975-01-663-7753
Electrical Cable Nipple

016637753
CCB376M0N14W: RNCC: 3 | RNVC: 2
1563779: RNCC: 5 | RNVC: 2
7422834907: RNCC: 5 | RNVC: 2

23 May 2017

5975-01-664-1249
Electrical Tie Down Mounting Base

016641249
CC01-01: RNCC: 3 | RNVC: 2

7 Jun 2017

5975-01-664-2014
Shop Set Installation Electrical Kit

016642014
10020018: RNCC: 3 | RNVC: 2

9 Jun 2017

5975-01-661-4414
Electrical Equipment Cabinet

016614414
AR3307: RNCC: 3 | RNVC: 2
AR3307: RNCC: 5 | RNVC: 2

2 Mar 2017

5975-01-429-2292
Brush Spring

014292292
90-4-3004: RNCC: 3 | RNVC: 2
10391980: RNCC: 6 | RNVC: 9

5 Apr 1996

5975-01-533-1375
Electrical Equipment Mounting Base

015331375
SUP-F96L80H: RNCC: 3 | RNVC: 2

1 Sep 2005

5975-01-144-7176
Electrical Components Tie Down Strap

011447176
T30MR: RNCC: 3 | RNVC: 2
3522 500 29117: RNCC: 5 | RNVC: 2
T30MR: RNCC: 5 | RNVC: 9

27 Dec 1982

5975-01-146-9607
Electrical-Electronic Equipment Chassis

011469607
5978930G002: RNCC: 3 | RNVC: 2

8 Feb 1983

5975-01-124-7990
Electrical Bonding Ring

011247990
0N120668: RNCC: 3 | RNVC: 2

13 Jan 1982

5975-01-047-7590
Panel Assembly

010477590
72D085510-2171: RNCC: 3 | RNVC: 2

13 Sep 1977

5975-01-661-7691
Electrical Components Tie Down Strap

016617691
8122: RNCC: 3 | RNVC: 2

15 Mar 2017

5975-01-662-9203
Guide Rail

016629203
UHK81176-1: RNCC: 3 | RNVC: 2

21 Apr 2017

5975-01-662-2035
Electrical Tie Down Mounting Base

016622035
100014932: RNCC: 3 | RNVC: 2

29 Mar 2017

5975-01-663-0566
Electrical Equipment Leg

016630566
2553760: RNCC: 3 | RNVC: 2

25 Apr 2017

5975-01-663-1591
Cord Assembly Fastener

016631591
232-454600-02-0101: RNCC: 3 | RNVC: 2

28 Apr 2017

5975-01-395-6657
Stuffing Tube

013956657
0050I41: RNCC: 3 | RNVC: 2
HD080/TM102-PG3ITEM16: RNCC: 5 | RNVC: 9

1 Sep 1994

5975-01-530-4972
Aircraft Equipment Quick Disconnect Handle

015304972
F5169245-1: RNCC: 3 | RNVC: 2

31 May 2005

5975-01-531-7914
Test Hood-Aft Tail

015317914
LA-RG972-101: RNCC: 3 | RNVC: 2

21 Jul 2005

5975-01-687-2313
Electrical-Electronic Equipment Chassis

016872313
SCD00800-7: RNCC: 3 | RNVC: 2

24 Mar 2020

5975-01-687-2335
Electrical Equipment Rack

016872335
1010960-01: RNCC: 3 | RNVC: 2
1010960-01: RNCC: 3 | RNVC: 9

24 Mar 2020

5975-01-686-8841
Junction Box

016868841
389893-21: RNCC: 3 | RNVC: 2

9 Mar 2020

5975-01-687-0699
Junction Box

016870699
844E2424-4: RNCC: 3 | RNVC: 2

17 Mar 2020

5975-01-687-3445
Electrical Equipment Rack

016873445
65-PRS11-075: RNCC: 3 | RNVC: 2

27 Mar 2020

5975-01-685-9315
Junction Box

016859315
AN-1309-G: RNCC: 3 | RNVC: 2

22 Jan 2020

5975-01-687-0772
Electrical-Electronic Equipment Chassis

016870772
93-036080-E: RNCC: 3 | RNVC: 2

17 Mar 2020

5975-01-687-2685
Electrical Conduit Sealing Fitting

016872685
8598469-03 FN6: RNCC: 3 | RNVC: 1
8598523-03-001: RNCC: 5 | RNVC: 1
8598469-03 FN6D7: RNCC: 5 | RNVC: 2
8598523-03-001D7: RNCC: 5 | RNVC: 2

25 Mar 2020

5975-01-374-3680
Conduit Outlet

013743680
6-1-9985-6: RNCC: 3 | RNVC: 2

22 Apr 1993

5975-01-345-6890
Stuffing Tube

013456890
3210B: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-6892
Stuffing Tube

013456892
3216B: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-212-6739
Electrical Equipment Mounting Base

012126739
1214C1428: RNCC: 3 | RNVC: 2
1214C1428: RNCC: 5 | RNVC: 9

17 Jul 1985

5975-01-530-9227
Electrical Equipment Rack

015309227
16103527-011: RNCC: 3 | RNVC: 2

16 Jun 2005

5975-01-142-1598
Electrical-Electronic Equipment Chassis

011421598
SM-C-415212: RNCC: 3 | RNVC: 2
SM-C-415212: RNCC: 5 | RNVC: 9

12 Nov 1982

5975-01-682-0789
Electrical Equipment Rack

016820789
ACXMODH2R-P-R2-SHIP: RNCC: 3 | RNVC: 2

22 Jul 2019

5975-01-682-6976
Cable Hanger

016826976
CL-6-SKR: RNCC: 3 | RNVC: 2

20 Aug 2019

5975-01-682-2142
Electrical Components Tie Down Strap

016822142
304-7077: RNCC: 3 | RNVC: 2

26 Jul 2019

5975-01-682-9584
Electrical Equipment Cabinet

016829584
CBTI5000: RNCC: 3 | RNVC: 2

30 Aug 2019

5975-01-683-2510
Electrical-Electronic Equipment Chassis

016832510
60000G04: RNCC: 3 | RNVC: 2

16 Sep 2019

5975-01-683-8150
Raceway Cover

016838150
39278-40201-20: RNCC: 3 | RNVC: 2

8 Oct 2019

5975-01-685-6442
Mounting Plate

016856442
K10055761-1: RNCC: 3 | RNVC: 2

3 Jan 2020

5975-01-684-7934
Electrical Equipment Rack

016847934
19212-3530-01: RNCC: 3 | RNVC: 2

18 Nov 2019

5975-01-685-2067
Electrical Cable Splice Protector

016852067
KS-2: RNCC: 3 | RNVC: 2

5 Dec 2019

5975-01-538-0043
Cable Marker Sleeve

015380043
11439543-633: RNCC: 3 | RNVC: 2

7 Mar 2006

5975-01-447-6222
Stuffing Tube

014476222
630A005NF052F: RNCC: 3 | RNVC: 2

11 Aug 1997

5975-01-421-3395
Blank Panel

014213395
7596264G1: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-420-7477
Flexible Metal Conduit

014207477
SEAL TITE, TYPE UA: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-533-9327
Junction Box

015339327
1D19694G01: RNCC: 3 | RNVC: 2

30 Sep 2005

5975-00-245-1729
Conduit Outlet

002451729
E47: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-01-423-4166
Electrical Equipment Cabinet

014234166
3041399G1: RNCC: 3 | RNVC: 2

26 Dec 1995

5975-01-680-4906
Raceway End Cap

016804906
175ECA-32: RNCC: 3 | RNVC: 2

7 May 2019

5975-01-678-6041
Electrical Equipment Rack

016786041
FX2-H4: RNCC: 3 | RNVC: 2

14 Feb 2019

5975-01-678-8453
Electrical-Electronic Equipment Chassis

016788453
CHAS-BP-MX960-S: RNCC: 3 | RNVC: 2
CHAS-BP-MX960-S: RNCC: 5 | RNVC: 2

28 Feb 2019

5975-01-677-5664
Electrical Equipment Rack

016775664
AR3300G: RNCC: 3 | RNVC: 2

19 Dec 2018

5975-01-679-4587
Electrical-Electronic Equipment Panel

016794587
CC12408-001: RNCC: 3 | RNVC: 2

25 Mar 2019

5975-00-962-7517
Junction Box

009627517
271385: RNCC: 3 | RNVC: 2
271385: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-677-6373
Electrical Box Connector

016776373
CBX2WH-AY: RNCC: 3 | RNVC: 2

26 Dec 2018

5975-01-437-6699
Electrical Equipment Mounting Base

014376699
HLN5292BR: RNCC: 3 | RNVC: 2

21 Oct 1996

5975-01-597-7486
Electrical-Electronic Equipment Panel

015977486
MPEP250: RNCC: 3 | RNVC: 2
MPEP250: RNCC: 5 | RNVC: 2
CV174077: RNCC: 5 | RNVC: 2

20 Jun 2011

5975-01-195-5653
Junction Box

011955653
1214D1732: RNCC: 3 | RNVC: 2
1213D1701 FIND 1: RNCC: 5 | RNVC: 2
1214D1732: RNCC: 5 | RNVC: 9
1213D1701 FIND 1: RNCC: 5 | RNVC: 9

30 Nov 1984

5975-01-313-1019
Blank Panel

013131019
GC2-32000540: RNCC: 3 | RNVC: 2

31 Dec 1989

5975-01-313-6287
Electrical Grounding Plate

013136287
86-10-A617-1215: RNCC: 3 | RNVC: 2

12 Jan 1990

5975-01-314-8104
Electrical Conduit Adapter

013148104
R-84: RNCC: 3 | RNVC: 2
RE84: RNCC: 3 | RNVC: 2

6 Feb 1990

5975-01-106-6633
Electrical Equipment Mounting Base

011066633
B300: RNCC: 3 | RNVC: 2

22 Jan 1981

5975-01-675-2460
Electrical Components Tie Down Strap

016752460
BT4LH-L0: RNCC: 3 | RNVC: 2
BT4LH-L0: RNCC: 5 | RNVC: 2

29 Aug 2018

5975-01-674-3120
Electrical Equipment Shelf

016743120
7-511115140A13: RNCC: 3 | RNVC: 2

20 Jul 2018

5975-00-314-6811
Rigid Metal Conduit

003146811
684: RNCC: 3 | RNVC: 2

7 Nov 1973

5975-01-311-2351
Electrical Equipment Mounting Base

013112351
11-1126: RNCC: 3 | RNVC: 2
91562061: RNCC: 5 | RNVC: 2

22 Nov 1989

5975-01-311-2350
Electrical Equipment Mounting Base

013112350
11-1006: RNCC: 3 | RNVC: 2
91608232: RNCC: 5 | RNVC: 2

22 Nov 1989

5975-01-674-6238
Electrical-Electronic Equipment Panel

016746238
ADTS405-1729-22-M0: RNCC: 3 | RNVC: 2

3 Aug 2018

5975-01-198-3587
Indicator

011983587
026-11780: RNCC: 3 | RNVC: 2
26-11780: RNCC: 5 | RNVC: 9

7 Jan 1985

5975-00-501-2146
Conduit Outlet Cover

005012146
2721: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-504-9000
Conduit Outlet Cover

005049000
S32232: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-309-5309
Blank Panel

013095309
CVC2538-12: RNCC: 3 | RNVC: 2
CVC2538-12: RNCC: 5 | RNVC: 9

19 Oct 1989

5975-01-672-6404
Electrical-Electronic Equipment Chassis

016726404
752-8799-001: RNCC: 3 | RNVC: 2

10 May 2018

5975-01-652-7990
Junction Box Assembly

016527990
328-302021-001: RNCC: 3 | RNVC: 2

4 Mar 2016

5975-01-305-5929
Spiral Sleeving

013055929
5015423-2: RNCC: 3 | RNVC: 2

8 Aug 1989

5975-01-342-3514
Cord Assembly Fastener

013423514
9622-20-02: RNCC: 3 | RNVC: 9

20 Jul 1991

5975-01-342-6036
Cable Marker Sleeve

013426036
651036-125: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-00-868-2167
Electrical Equipment Cabinet

008682167
FR126A: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-01-652-2529
Blank Panel

016522529
LP7141: RNCC: 3 | RNVC: 2

16 Feb 2016

5975-01-652-3284
Electrical-Electronic Equipment Panel

016523284
UPS1000-16: RNCC: 3 | RNVC: 2

17 Feb 2016

5975-00-425-4701
Conduit Outlet

004254701
C3: RNCC: 3 | RNVC: 9
37S2783: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-340-7416
Rigid Metal Conduit Assembly

013407416
GA191-A22B2252-54NFS: RNCC: 3 | RNVC: 2

19 Jun 1991

5975-01-338-5162
Cable Marker Sleeve

013385162
LS7225-6-8: RNCC: 3 | RNVC: 2

4 May 1991

5975-01-339-2772
Electrical-Electronic Equipment Chassis

013392772
897993-1: RNCC: 3 | RNVC: 2
897993-1: RNCC: 5 | RNVC: 9

19 May 1991

5975-01-339-4002
Rigid Metal Conduit Assembly

013394002
GA191-A14B1424-72NFS: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-100-1822
Connector Bracket

011001822
346395-1: RNCC: 3 | RNVC: 2
346395-1: RNCC: 8 | RNVC: 2

29 Aug 1980

5975-00-239-0334
Conduit Outlet

002390334
LB87: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
70-303: RNCC: 5 | RNVC: 2
LB300-M: RNCC: 5 | RNVC: 2
15707: RNCC: 5 | RNVC: 9
480-111-M: RNCC: 5 | RNVC: 9
LB68: RNCC: 5 | RNVC: 9
LB-300G: RNCC: 5 | RNVC: 9
LB87: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-336-3021
Electrical Equipment Mounting Base

013363021
882900-2: RNCC: 3 | RNVC: 2

24 Mar 1991

5975-01-097-4698
Blank Panel

010974698
40175: RNCC: 3 | RNVC: 9

12 Jul 1980

5975-00-178-0469
Stuffing Tube

001780469
9S5235LREV18SYMB0L1681: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0472
Stuffing Tube

001780472
9S5235LSYMB0L1684: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0580
Stuffing Tube

001780580
9S5010LALT17TYPE21SIZEP: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0569
Stuffing Tube

001780569
9S5010LALT17TYPE21SIZEA: RNCC: 3 | RNVC: 2
17T10180: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-330-7224
Electrical-Electronic Equipment Chassis

013307224
596795-G02: RNCC: 3 | RNVC: 2

7 Dec 1990

5975-01-647-9700
Electrical-Electronic Equipment Chassis

016479700
41012: RNCC: 3 | RNVC: 2

9 Sep 2015

5975-01-647-4148
Electrical Components Tie Down Strap

016474148
TY400-50X: RNCC: 3 | RNVC: 2

21 Aug 2015

5975-01-647-2969
Electrical Equipment Mounting Base

016472969
KC44024-001: RNCC: 3 | RNVC: 2
KC44024: RNCC: D | RNVC: 9

17 Aug 2015

5975-00-870-6323
Electrical Box Connector

008706323
CGB114: RNCC: 3 | RNVC: 2
9975847: RNCC: 5 | RNVC: 2
5975008706323: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-647-4868
Electrical Equipment Rack

016474868
05.010.002.1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-149-7376
Rigid Metal Conduit

011497376
35-8252-801: RNCC: 3 | RNVC: 2

25 Mar 1983

5975-01-646-0597
Electric Component Rail Guide Stop

016460597
B204: RNCC: 3 | RNVC: 2

11 Jul 2015

5975-01-646-7543
Electrical-Electronic Equipment Panel

016467543
1001155878: RNCC: 3 | RNVC: 2
1001155878: RNCC: 5 | RNVC: 2
1001155878: RNCC: 5 | RNVC: 2

29 Jul 2015

5975-01-103-5205
Solenoid Case

011035205
1010205-2: RNCC: 3 | RNVC: 2
1010205-2: RNCC: 3 | RNVC: 9

13 Nov 1980

5975-01-105-4246
Ground Strap

011054246
3150100-601-29: RNCC: 3 | RNVC: 2

23 Dec 1980

5975-01-417-4384
Electrical-Electronic Equipment Chassis

014174384
4041149G1: RNCC: 3 | RNVC: 2
4041149G1: RNCC: 5 | RNVC: 2

7 Aug 1995

5975-01-325-4740
Electrical Grounding Plate

013254740
279-316: RNCC: 3 | RNVC: 9
40102435: RNCC: 5 | RNVC: 2
PS190469415261: RNCC: 5 | RNVC: 2

5 Sep 1990

5975-01-144-5061
Electrical Equipment Rack

011445061
806422-2: RNCC: 3 | RNVC: 2

21 Dec 1982

5975-01-148-5254
Ground Rod

011485254
402804-2: RNCC: 3 | RNVC: 2

8 Mar 1983

5975-01-143-0147
Electrical Components Tie Down Strap

011430147
SS1-5MM: RNCC: 3 | RNVC: 2

24 Nov 1982

5975-01-142-2216
Blank Panel

011422216
571553-3: RNCC: 3 | RNVC: 2

13 Nov 1982

5975-01-645-4151
Electrical-Electronic Equipment Chassis

016454151
AA3102120-01: RNCC: 3 | RNVC: 2

15 Jun 2015

5975-01-645-2637
Eprom

016452637
74434B64K1VER02: RNCC: 3 | RNVC: 1

9 Jun 2015

5975-01-645-3455
Cable Hanger

016453455
02.045.147.1: RNCC: 3 | RNVC: 2

12 Jun 2015

5975-01-417-3393
Sectiona Terminal Junction Block

014173393
RC11090-7U: RNCC: 3 | RNVC: 2
9D0090-7U: RNCC: 5 | RNVC: 2

5 Aug 1995

5975-01-417-3379
Sectiona Terminal Junction Block

014173379
RC11090-3U: RNCC: 3 | RNVC: 2
9D0090-3U: RNCC: 5 | RNVC: 2

5 Aug 1995

5975-01-141-2028
Electrical-Electronic Equipment Chassis

011412028
29700-79: RNCC: 3 | RNVC: 2

25 Oct 1982

5975-01-141-4947
Electrical-Electronic Equipment Chassis

011414947
0N312428: RNCC: 3 | RNVC: 2
MX-10438(V)2/G: RNCC: 5 | RNVC: 2

30 Oct 1982

5975-01-644-1973
Line Supporting Strap

016441973
B-3852-1-0: RNCC: 3 | RNVC: 2

24 Apr 2015

5975-01-214-1271
Junction Box Cover

012141271
300806: RNCC: 3 | RNVC: 2
5021-1: RNCC: 5 | RNVC: 2

6 Aug 1985

5975-01-096-3730
Electrical-Electronic Equipment Chassis

010963730
322417-2: RNCC: 3 | RNVC: 2
322417-2: RNCC: 5 | RNVC: 9
322417-2: RNCC: 8 | RNVC: 2

18 Jun 1980

5975-01-096-9380
Electrical Equipment Mounting Base

010969380
8027896-10: RNCC: 3 | RNVC: 2
MT-4681/M: RNCC: 5 | RNVC: 2

1 Jul 1980

5975-01-097-4362
Cable Marker Sleeve

010974362
322367-7: RNCC: 3 | RNVC: 2
322367-7: RNCC: 5 | RNVC: 9
322367-7: RNCC: 8 | RNVC: 2

11 Jul 1980

5975-01-415-9745
Terminal Board

014159745
9D0090-46U: RNCC: 3 | RNVC: 2
RC11090-46U: RNCC: 5 | RNVC: 2
9D0090: RNCC: D | RNVC: 9

11 Jul 1995

5975-01-642-2234
Electrical Components Tie Down Strap

016422234
SSPM4H-L300: RNCC: 3 | RNVC: 2
42099076: RNCC: 5 | RNVC: 2

18 Feb 2015

5975-01-642-9655
Electrical-Electronic Equipment Chassis

016429655
JG403A: RNCC: 3 | RNVC: 2

16 Mar 2015

5975-01-643-5725
Junction Box

016435725
M403515-01: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-642-9752
Electrical Equipment Mounting Base

016429752
10299-0585-01: RNCC: 3 | RNVC: 2

16 Mar 2015

5975-01-641-6346
Cable Marker Sleeve

016416346
TMS-SCE-1K-3/4-2-6: RNCC: 3 | RNVC: 2

28 Jan 2015

5975-01-089-9399
Electrical-Electronic Equipment Panel

010899399
8680371-507: RNCC: 3 | RNVC: 2
8680371-507: RNCC: 3 | RNVC: 9
8680371-505: RNCC: 5 | RNVC: 9
8680371-503: RNCC: 5 | RNVC: 9

10 Feb 1980

5975-01-060-2560
Cable Marker Sleeve

010602560
ST650713A19P44: RNCC: 3 | RNVC: 2

18 May 1978

5975-01-641-8703
Cross-Connector

016418703
1069900000: RNCC: 3 | RNVC: 2

5 Feb 2015

5975-01-135-3029
Electrical Conduit Bushing

011353029
5902946-3: RNCC: 1 | RNVC: 2
FIT SEAL-C: RNCC: 3 | RNVC: 2

21 Jul 1982

5975-01-122-9253
Electrical Components Tie Down Strap

011229253
10S300-2-111: RNCC: 3 | RNVC: 9
10S300-2-111: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-122-9257
Electrical Components Tie Down Strap

011229257
10S300-2-13: RNCC: 3 | RNVC: 9
10S300-2-13: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-123-1173
Electronic Bracket

011231173
SM-D-858694: RNCC: 3 | RNVC: 2

6 Dec 1981

5975-01-053-6294
Electrical Components Tie Down Strap

010536294
TF-5H: RNCC: 3 | RNVC: 2
TF5H: RNCC: 5 | RNVC: 2

7 Jan 1978

5975-01-238-1133
Strain Electrical Conductor Clamp

012381133
204-83179-7: RNCC: 3 | RNVC: 2

11 Aug 1986

5975-01-127-9865
Pin Micro Switch

011279865
162957: RNCC: 3 | RNVC: 2

11 Mar 1982

5975-01-108-8975
Electrical Equipment Mounting Base

011088975
622-5410-001: RNCC: 3 | RNVC: 2

7 Mar 1981

5975-01-411-6054
Electrical Equipment Rack

014116054
011-00059-00: RNCC: 3 | RNVC: 2

28 Mar 1995

5975-01-411-5378
Blank Panel

014115378
11463972: RNCC: 3 | RNVC: 2

27 Mar 1995

5975-01-580-7351
Mounting Tray

015807351
400-048124-01: RNCC: 3 | RNVC: 2

28 Dec 2009

5975-01-581-2557
Electrical Equipment Mounting Base

015812557
779689-01: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-580-8316
Electrical-Electronic Equipment Chassis

015808316
6547-0000-0500: RNCC: 3 | RNVC: 2

29 Dec 2009

5975-01-098-9508
Blank Panel

010989508
08640-20204: RNCC: 3 | RNVC: 2
08640-20204: RNCC: 3 | RNVC: 9
08640-20204: RNCC: 5 | RNVC: 9

9 Aug 1980

5975-01-097-4361
Cable Marker Sleeve

010974361
322367-3: RNCC: 3 | RNVC: 2
322367-3: RNCC: 5 | RNVC: 9
322367-3: RNCC: 8 | RNVC: 2

11 Jul 1980

5975-01-374-1515
Electrical Box Connector

013741515
6-1-9985-9: RNCC: 3 | RNVC: 2

17 Apr 1993

5975-01-373-9483
Electrical Conduit Elbow

013739483
6-1-9985-7: RNCC: 3 | RNVC: 2

13 Apr 1993

5975-01-411-2626
Safety Shorting Probe

014112626
020-1908-00: RNCC: 3 | RNVC: 2

21 Mar 1995

5975-01-212-5829
Flat Cable Clamp

012125829
223-100011-002: RNCC: 1 | RNVC: 2
DFCC-3: RNCC: 3 | RNVC: 2

14 Jul 1985

5975-01-544-5585
Electrical-Electronic Equipment Chassis

015445585
11437622: RNCC: 3 | RNVC: 2

16 Oct 2006

5975-01-539-8337
Electrical Components Tie Down Strap

015398337
KH5055: RNCC: 3 | RNVC: 9
KH5055: RNCC: C | RNVC: 1

2 May 2006

5975-01-547-6832
Mount Rack Kit

015476832
AD053A: RNCC: 3 | RNVC: 2
AD053A: RNCC: 3 | RNVC: 9
AD053A: RNCC: 5 | RNVC: 2

29 Jan 2007

5975-00-548-5241
Electrical Conduit Coupling Nut

005485241
5276007: RNCC: 3 | RNVC: 2
1889420: RNCC: 3 | RNVC: 2
5276007: RNCC: 3 | RNVC: 2
CAN14046: RNCC: 5 | RNVC: 9
1889420: RNCC: 5 | RNVC: 9
1889420: RNCC: 5 | RNVC: 9
CAN14046: RNCC: 5 | RNVC: 9
1889420: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-373-1724
Junction Box

013731724
12101081-9: RNCC: 3 | RNVC: 2
12101081-9: RNCC: 3 | RNVC: 9
12101081-9: RNCC: 5 | RNVC: 9

30 Mar 1993

5975-01-373-9514
Flexible Metal Conduit

013739514
6-1-9985-19: RNCC: 3 | RNVC: 2

13 Apr 1993

5975-01-535-0665
Cable Strain Relief Bushing

015350665
186441: RNCC: 3 | RNVC: 2
186441: RNCC: 3 | RNVC: 9

14 Nov 2005

5975-00-610-5825
Conduit Outlet

006105825
LL57: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-072-1483
Electrical Equipment Rack

010721483
0N505012: RNCC: 3 | RNVC: 2
TSEC/KGF-28B: RNCC: 5 | RNVC: 2

24 Feb 1979

5975-01-372-2378
Electrical Equipment Mounting Base

013722378
10419: RNCC: 3 | RNVC: 2
17B9E1000-529: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-371-9783
Electrical Equipment Mounting Base

013719783
3688047: RNCC: 3 | RNVC: 2

27 Feb 1993

5975-01-205-1069
Electrical Equipment Cabinet

012051069
CY-7970/WSC: RNCC: 3 | RNVC: 2
6-9115-102: RNCC: 5 | RNVC: 2
3533380-0501: RNCC: 5 | RNVC: 2
CY-7970/WSC: RNCC: 5 | RNVC: 2

4 Apr 1985

5975-01-508-3619
Trim

015083619
910150-7: RNCC: 3 | RNVC: 2

19 May 2003

5975-01-066-6491
Electrical Box Connector

010666491
2123: RNCC: 3 | RNVC: 2
1C-32: RNCC: 5 | RNVC: 9
20501: RNCC: 5 | RNVC: 9
1151-S: RNCC: 5 | RNVC: 9
5033: RNCC: 5 | RNVC: 9

15 Oct 1978

5975-01-371-2085
Electrical-Electronic Equipment Chassis

013712085
MMAC-3FNB: RNCC: 3 | RNVC: 2

8 Feb 1993

5975-01-248-8566
Microcircuit Remover

012488566
5016: RNCC: 3 | RNVC: 2
5016: RNCC: 3 | RNVC: 9

31 Jan 1987

5975-01-036-1448
Junction Box

010361448
6080: RNCC: 3 | RNVC: 2

23 Feb 1977

5975-01-551-4797
Electrical Equipment Cabinet

015514797
TAC-DCD-010: RNCC: 3 | RNVC: 2

17 May 2007

5975-01-580-9192
Electrical Equipment Rack

015809192
AF002A#001: RNCC: 3 | RNVC: 2

30 Dec 2009

5975-01-582-5621
Electrical-Electronic Equipment Chassis

015825621
105289: RNCC: 3 | RNVC: 2

25 Feb 2010

5975-01-055-6866
Electrical Equipment Rack

010556866
654-0044-001: RNCC: 3 | RNVC: 2

10 Feb 1978

5975-01-280-0270
Electrical-Electronic Equipment Panel

012800270
672-1031-00: RNCC: 3 | RNVC: 2

29 May 1988

5975-01-280-9336
Electrical-Electronic Equipment Chassis

012809336
5188053: RNCC: 3 | RNVC: 2

15 Jun 1988

5975-01-283-2682
Electrical-Electronic Equipment Panel

012832682
4415A320A: RNCC: 3 | RNVC: 2

2 Aug 1988

5975-01-258-6767
Electrical Equipment Mounting Base

012586767
802075: RNCC: 3 | RNVC: 2

6 Jul 1987

5975-01-573-8590
Electrical Equipment Rack

015738590
RX1609-600: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8593
Electrical Equipment Rack

015738593
RX1123-500: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-580-9620
Electrical Equipment Rack

015809620
572559-B21: RNCC: 3 | RNVC: 2

31 Dec 2009

5975-01-581-5691
Junction Box Cover

015815691
915405-2: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-049-1360
Junction Box Cover

010491360
72113: RNCC: 3 | RNVC: 2

12 Oct 1977

5975-01-366-7999
Electrical-Electronic Equipment Panel

013667999
DAA3295A180-023: RNCC: 3 | RNVC: 2

3 Nov 1992

5975-01-265-8642
Electrical Conduit Adapter

012658642
SE20E2837ARL34: RNCC: 3 | RNVC: 2

18 Oct 1987

5975-01-573-8588
Electrical Equipment Rack

015738588
RX1609-502: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-3787
Rigid Metal Conduit Assembly

015733787
AEP8000-567: RNCC: 3 | RNVC: 2

20 Apr 2009

5975-01-574-2065
Interconnecting Box

015742065
13218643: RNCC: 3 | RNVC: 2

19 May 2009

5975-01-028-5462
Electrical Equipment Rack

010285462
10699522: RNCC: 3 | RNVC: 2
10699522: RNCC: 5 | RNVC: 2
10699522: RNCC: 5 | RNVC: 2
10699522: RNCC: 5 | RNVC: 9

6 Oct 1976

5975-01-170-5927
Wrap Tie

011705927
1400-0839: RNCC: 3 | RNVC: 2

27 Jan 1984

5975-01-572-3052
Electrical-Electronic Equipment Chassis

015723052
071-060-007-01: RNCC: 3 | RNVC: 1

5 Mar 2009

5975-01-571-5961
Blank Panel

015715961
E7733A: RNCC: 3 | RNVC: 2
E7733A: RNCC: 3 | RNVC: 9

10 Feb 2009

5975-01-571-3176
Electrical Fitting Mounting Base

015713176
STBXBA2200: RNCC: 3 | RNVC: 2

30 Jan 2009

5975-01-199-3185
Electrical Box Connector

011993185
504NC: RNCC: 3 | RNVC: 9

20 Jan 1985

5975-01-362-8771
Electrical-Electronic Equipment Panel

013628771
921102144-009: RNCC: 3 | RNVC: 9

18 Aug 1992

5975-01-362-4743
Electrical-Electronic Equipment Panel

013624743
921101010-009: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-362-8911
Electrical Equipment Cabinet

013628911
4007875-0501: RNCC: 3 | RNVC: 2

18 Aug 1992

5975-01-363-5688
Electrical Equipment Mounting Base

013635688
16-0126-5: RNCC: 3 | RNVC: 2

1 Sep 1992

5975-01-570-4094
Electrical Equipment Cabinet Plenum Assy

015704094
204-57469-1: RNCC: 3 | RNVC: 2

29 Dec 2008

5975-01-570-7306
Electrical Equipment Cabinet Case

015707306
2616160900: RNCC: 3 | RNVC: 2
26161690: RNCC: 5 | RNVC: 2

12 Jan 2009

5975-01-570-2535
Electrical-Electronic Equipment Panel

015702535
360-1215-001: RNCC: 3 | RNVC: 2

18 Dec 2008

5975-01-361-8760
Electrical Equipment Mounting Base

013618760
2146-0006-000: RNCC: 3 | RNVC: 2

28 Jul 1992

5975-01-362-2838
Electrical Components Tie Down Strap

013622838
SST2NOIR: RNCC: 3 | RNVC: 2

4 Aug 1992

5975-01-362-5042
Electrical Conduit Bend

013625042
68A311262-2001: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-01-569-4942
Electrical Bushing

015694942
RL138-2: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-570-0991
Cable Collar

015700991
251A2123-1: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-569-4945
Electrical Bushing

015694945
RW309-16: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-682-0506
Electrical Equipment Mounting Base

016820506
1003193-325AHC: RNCC: 3 | RNVC: 2

18 Jul 2019

5975-01-183-9467
Side Plate

011839467
59-154822-2: RNCC: 3 | RNVC: 2

12 Jul 1984

5975-01-185-5249
Electrical Conduit Adapter

011855249
13054000: RNCC: 3 | RNVC: 2

30 Jul 1984

5975-01-271-3998
Electrical Conduit Wye

012713998
OP46: RNCC: 3 | RNVC: 9

23 Jan 1988

5975-01-301-7397
Electrical-Electronic Equipment Chassis

013017397
BA-11SD: RNCC: 3 | RNVC: 2

2 Jun 1989

5975-01-302-1714
Electrical Equipment Rack

013021714
3525075-143: RNCC: 3 | RNVC: 2

10 Jun 1989

5975-00-242-6707
Conduit Outlet

002426707
LB68: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-01-231-2252
Stuffing Tube

012312252
G1218B-5N: RNCC: 3 | RNVC: 2

24 Apr 1986

5975-01-269-9639
Electrical Components Tie Down Strap

012699639
MS3368-5-9A: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

24 Dec 1987

5975-01-566-0838
Electrical Conduit Adapter

015660838
712GS116A1524C3: RNCC: 3 | RNVC: 2

19 Aug 2008

5975-01-565-9474
Electrical Conduit Adapter

015659474
712AK116A2232C: RNCC: 3 | RNVC: 2

13 Aug 2008

5975-00-006-2049
Electrical-Electronic Equipment Chassis

000062049
666231-129: RNCC: 3 | RNVC: 2

23 Jun 1972

5975-01-083-1512
Test Lead Hanger

010831512
10177528: RNCC: 3 | RNVC: 2
10177528: RNCC: 5 | RNVC: 1
10177528: RNCC: 5 | RNVC: 1
10177528: RNCC: 5 | RNVC: 9

18 Sep 1979

5975-01-301-0044
Pe Controller

013010044
1663626-105: RNCC: 3 | RNVC: 2

23 May 1989

5975-00-265-7496
Conduit Outlet

002657496
GSC120: RNCC: 3 | RNVC: 2
WC586CLASS1: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-01-600-0155
Electrical Box Adapter Flange

016000155
8939432-0002: RNCC: 3 | RNVC: 2

2 Nov 2011

5975-00-819-5730
Conduit Outlet

008195730
LB38: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-011-7239
Electrical Components Tie Down Strap

010117239
TY-234M: RNCC: 3 | RNVC: 2
057560014: RNCC: 5 | RNVC: 2
33564-012: RNCC: 5 | RNVC: 2
GD00797565: RNCC: 5 | RNVC: 2
TY234M: RNCC: 5 | RNVC: 9
6074 156007: RNCC: 5 | RNVC: 9
TY234M: RNCC: C | RNVC: 1

26 Oct 1975

5975-01-259-5217
Blade

012595217
8000-417CC: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-599-0441
Eprom

015990441
74434B62VERTBE: RNCC: 3 | RNVC: 1

12 Sep 2011

5975-01-599-2023
Electrical-Electronic Equipment Chassis

015992023
60-970-01: RNCC: 3 | RNVC: 2

15 Sep 2011

5975-01-599-2337
Electrical-Electronic Equipment Chassis

015992337
NI PXIE-1065: RNCC: 3 | RNVC: 2

19 Sep 2011

5975-01-598-3307
Guide Rail

015983307
7250256: RNCC: 3 | RNVC: 2

21 Jul 2011

5975-01-599-1716
Electronic Equipment Mounting Tray

015991716
M103000: RNCC: 3 | RNVC: 2
M103000: RNCC: 3 | RNVC: 9

14 Sep 2011

5975-01-299-0384
Flexible Metal Conduit Assembly

012990384
750-011NF48-70.5: RNCC: 3 | RNVC: 2
200207-DI0705: RNCC: 3 | RNVC: 2
CH10-0340-201: RNCC: 5 | RNVC: 9
10250675-101: RNCC: 7 | RNVC: 2

24 Apr 1989

5975-01-259-5215
Blade

012595215
8000-417AA: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-597-8240
Cable Hanger

015978240
011-01336-04: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-297-9477
Junction Box Assembly

012979477
5599729-9: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-339-4147
Stuffing Tube

013394147
G1218A-6N: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-342-6005
Conduit Outlet

013426005
GRFT50: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-258-9038
Blank Panel

012589038
6003036G001: RNCC: 3 | RNVC: 2

10 Jul 1987

5975-01-278-8411
Electrical Equipment Cabinet

012788411
4208921: RNCC: 3 | RNVC: 2
4208921: RNCC: 5 | RNVC: 2

10 May 1988

5975-01-597-4738
Electrical Conduit Wye

015974738
342A024-25: RNCC: 3 | RNVC: 2

9 Jun 2011

5975-01-297-9690
Electrical-Electronic Equipment Panel

012979690
0002-3615: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-440-0493
Electrical-Electronic Equipment Panel

014400493
HSSP0516: RNCC: 3 | RNVC: 2
HELISEP500/HSSP0516: RNCC: 5 | RNVC: 2

31 Dec 1996

5975-01-459-4147
Electrical Equipment Mounting Base

014594147
LASER5-SHOCK: RNCC: 3 | RNVC: 2

30 Sep 1998

5975-01-079-2330
Liquid Level S Plug

010792330
710-0000-0-3: RNCC: 3 | RNVC: 2

30 Jun 1979

5975-01-463-0376
Electrical Equipment Rack

014630376
9309-002: RNCC: 3 | RNVC: 9

3 Mar 1999

5975-01-203-0015
Stuffing Tube

012030015
G1343B3B: RNCC: 3 | RNVC: 2

9 Mar 1985

5975-01-276-2857
Electrical-Electronic Equipment Chassis

012762857
67-05170-101: RNCC: 3 | RNVC: 2

6 Apr 1988

5975-01-594-5956
Cable Hanger

015945956
25324112: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-1231
Electrical Grounding Plate

015951231
77D617214P001: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-294-0448
Electrical Cable Support

012940448
4190453: RNCC: 3 | RNVC: 2

10 Feb 1989

5975-00-890-0129
Rigid Metal Conduit Assembly

008900129
32-65439-11: RNCC: 3 | RNVC: 2

3 Apr 1968

5975-01-262-3495
Electrical Cable Nipple

012623495
078394: RNCC: 3 | RNVC: 2

27 Aug 1987

5975-01-265-3420
Electrical Equipment Mounting Base

012653420
123SCAV5634-7: RNCC: 1 | RNVC: 2
20E3537-1: RNCC: 3 | RNVC: 2
123SCAV5634-7: RNCC: 5 | RNVC: 9

12 Oct 1987

5975-01-592-6420
Chassis Base

015926420
653-1539-001: RNCC: 3 | RNVC: 2

15 Mar 2011

5975-01-591-9798
Round Transit Frame

015919798
R 125 EMC: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-592-7841
Electronic Equipment Mounting Tray

015927841
M103027-101: RNCC: 3 | RNVC: 2
M103027-101: RNCC: 3 | RNVC: 9

18 Mar 2011

5975-01-592-5401
Electrical Tie Down Mounting Base

015925401
FTH-27-12-01: RNCC: 3 | RNVC: 2
FTH-27-12-01: RNCC: 3 | RNVC: 9

10 Mar 2011

5975-01-568-0260
Electrical-Electronic Equipment Chassis

015680260
ACP-4000: RNCC: 3 | RNVC: 2

16 Oct 2008

5975-01-272-5220
Bushing

012725220
A106549: RNCC: 3 | RNVC: 2

10 Feb 1988

5975-01-590-6381
Interconnecting Box

015906381
020649-DAGR: RNCC: 3 | RNVC: 2
10690126-001: RNCC: 7 | RNVC: 2

14 Dec 2010

5975-01-591-0167
Insulator Bracket

015910167
2862613: RNCC: 3 | RNVC: 2

6 Jan 2011

5975-01-591-0388
Electrical-Electronic Equipment Chassis

015910388
R58228: RNCC: 3 | RNVC: 2

7 Jan 2011

5975-01-286-6822
Cable Hanger

012866822
43196: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-657-7612
Electrical Cable Protector

016577612
C000100501000: RNCC: 3 | RNVC: 2

29 Aug 2016

5975-01-614-0364
Electrical-Electronic Equipment Chassis

016140364
1711547C: RNCC: 3 | RNVC: 2

26 Nov 2012

5975-01-587-2912
Electrical-Electronic Equipment Panel

015872912
107329: RNCC: 3 | RNVC: 2

2 Aug 2010

5975-01-589-9625
Electrical Equipment Mounting Base

015899625
548-3984-004: RNCC: 3 | RNVC: 2

9 Nov 2010

5975-01-589-4520
Electrical-Electronic Equipment Panel

015894520
797-7621-001: RNCC: 3 | RNVC: 2

27 Oct 2010

5975-01-285-8642
Electrical-Electronic Equipment Chassis

012858642
7012036-901: RNCC: 3 | RNVC: 2

22 Sep 1988

5975-01-611-7829
Electronic Equipment Mounting Tray

016117829
D6591110204: RNCC: 3 | RNVC: 2

25 Sep 2012

5975-01-588-2545
Electrical Components Tie Down Strap

015882545
0CE090-109: RNCC: 3 | RNVC: 9
M85049/118S10W: RNCC: C | RNVC: 1

9 Sep 2010

5975-01-376-9800
Conduit Outlet

013769800
E984J: RNCC: 3 | RNVC: 9
00034881065667: RNCC: 5 | RNVC: 9
00034481065661: RNCC: 5 | RNVC: 9

1 Jul 1993

5975-01-264-3059
Electrical Equipment Cabinet

012643059
0N393050: RNCC: 3 | RNVC: 2
CY-8541/GSQ-232: RNCC: 5 | RNVC: 2

28 Sep 1987

5975-01-611-2216
Electrical Conductor Bushing

016112216
D5211100202: RNCC: 3 | RNVC: 2

7 Sep 2012

5975-01-282-0958
Electrical-Electronic Equipment Chassis

012820958
757-0907-002: RNCC: 3 | RNVC: 2

8 Jul 1988

5975-01-608-6018
Blank Panel

016086018
N20-BBLKD: RNCC: 3 | RNVC: 2

3 Jul 2012

5975-01-608-6016
Electrical-Electronic Equipment Chassis

016086016
R2XX-G31032RAIL: RNCC: 3 | RNVC: 2

3 Jul 2012

5975-01-608-9559
Flexible Nonmetallic Conduit

016089559
623-4929-004: RNCC: 3 | RNVC: 9

13 Jul 2012

5975-01-129-3474
Blank Panel

011293474
9M381D7: RNCC: 3 | RNVC: 2

5 Apr 1982

5975-01-280-4674
Electrical Cable Assembly Protector

012804674
152D3006: RNCC: 3 | RNVC: 2
152-1056 ITEM 30: RNCC: 5 | RNVC: 2

10 Jun 1988

5975-01-279-6519
Marker

012796519
391-2420: RNCC: 3 | RNVC: 2

23 May 1988

5975-01-280-0267
Electrical-Electronic Equipment Panel

012800267
670505806: RNCC: 3 | RNVC: 2
670-5058-05: RNCC: 5 | RNVC: 9

29 May 1988

5975-00-355-4798
Stuffing Tube

003554798
9S5235LREV18SYMB0L1551-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0600
Stuffing Tube

001780600
9S5010LALT17TYPE22BSYMB0L1908: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0516
Stuffing Tube

001780516
9S5342LREV10TYPE53SYMB0L1742: RNCC: 3 | RNVC: 2

1 Jan 1963

Load More Results