What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 156 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 156 of 176

5975-01-544-2385
Electrical-Electronic Equipment Chassis

015442385
211453: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-519-5951
Electrical Equipment Shelf

015195951
114E2071-18: RNCC: 3 | RNVC: 2

26 Apr 2004

5975-01-517-9071
Electrical-Electronic Equipment Chassis

015179071
11441871: RNCC: 3 | RNVC: 2

24 Feb 2004

5975-01-518-9282
Blank Panel

015189282
1003064-002: RNCC: 3 | RNVC: 2

29 Mar 2004

5975-01-519-4291
Cable Marker Sleeve

015194291
10253825-002: RNCC: 3 | RNVC: 2

19 Apr 2004

5975-01-291-0357
Junction Cable Rack

012910357
002012: RNCC: 3 | RNVC: 1
2012: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-00-503-0962
Electrical Equipment Rack

005030962
S0D63676ANDGS55140: RNCC: 3 | RNVC: 2
S0D63676ANDGS55140: RNCC: 5 | RNVC: 9
S0D63676ANDGS55140: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-508-1505
Interconnecting Box

005081505
463004-110: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-171-6368
Cable Spacer

011716368
13030397: RNCC: 3 | RNVC: 2
13030397: RNCC: 5 | RNVC: 1
10087274: RNCC: 6 | RNVC: 9

11 Feb 1984

5975-01-260-3642
Electrical-Electronic Equipment Chassis

012603642
102600G4: RNCC: 3 | RNVC: 2
102600G4: RNCC: 5 | RNVC: 9

30 Jul 1987

5975-01-261-4700
Electrical-Electronic Equipment Chassis

012614700
0N313169: RNCC: 3 | RNVC: 2

13 Aug 1987

5975-00-522-5559
Flexible Metal Conduit Assembly

005225559
5334403-566: RNCC: 3 | RNVC: 2
5334403-566: RNCC: 5 | RNVC: 9
C175XX57M8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5566
Flexible Metal Conduit Assembly

005225566
5334403-684: RNCC: 3 | RNVC: 2
5334403-684: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5551
Flexible Metal Conduit Assembly

005225551
5334403-504: RNCC: 3 | RNVC: 2
5334403-504: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5558
Flexible Metal Conduit Assembly

005225558
5334403-556: RNCC: 3 | RNVC: 2
5334403-556: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-2044
Flexible Metal Conduit Assembly

005212044
5143436-2: RNCC: 3 | RNVC: 2
5143436-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-518-2128
Junction Box

005182128
5733: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-259-5220
Blade

012595220
8000-417E: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-259-5228
Blade

012595228
8000-417M: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-00-326-9070
Flexible Metal Conduit Assembly

003269070
5334403-598: RNCC: 3 | RNVC: 2
5334403-598: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-303-6764
Electrical Components Tie Down Strap

013036764
696-40527-4: RNCC: 3 | RNVC: 2
696-40527-4-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-00-319-6018
Flexible Nonmetallic Conduit

003196018
15042R: RNCC: 3 | RNVC: 9
15042R: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-208-9341
Stored Cables Cover

012089341
10178479-8: RNCC: 3 | RNVC: 2
EC1024688: RNCC: 5 | RNVC: 9

21 May 1985

5975-01-195-5072
Electrical Conduit Elbow

011955072
C22000-71: RNCC: 3 | RNVC: 9

30 Nov 1984

5975-01-141-4944
Electrical-Electronic Equipment Chassis

011414944
0N312328: RNCC: 3 | RNVC: 2
SA-2386/G: RNCC: 5 | RNVC: 2

30 Oct 1982

5975-00-440-2280
Junction Box

004402280
ASG10X8X4: RNCC: 3 | RNVC: 2

20 May 1974

5975-00-439-9332
Electrical Equipment Rack

004399332
DCR260: RNCC: 3 | RNVC: 2

12 Dec 1969

5975-01-204-7767
Cable Hanger

012047767
13075927-1: RNCC: 3 | RNVC: 2
13075927-1: RNCC: 5 | RNVC: 9

29 Mar 1985

5975-00-221-2421
Electrical Equipment Cabinet

002212421
C5-128: RNCC: 3 | RNVC: 2
C5128: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-671-2210
Electrical Equipment Mounting Base

016712210
822-1511-006: RNCC: 3 | RNVC: 2

20 Mar 2018

5975-01-666-9820
Electrical-Electronic Equipment Panel

016669820
3365560-1: RNCC: 3 | RNVC: 2

28 Sep 2017

5975-01-651-9124
Electrical Equipment Mounting Base

016519124
2879596: RNCC: 3 | RNVC: 2
2879596: RNCC: 5 | RNVC: 2

3 Feb 2016

5975-01-653-0070
Junction Box Assembly

016530070
328-302020-001: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-653-1483
Electronic Equipment Mounting Tray

016531483
MT6-6311-111: RNCC: 3 | RNVC: 2

14 Mar 2016

5975-01-663-7568
Interconnecting Box

016637568
1590WGFBK: RNCC: 3 | RNVC: 2

23 May 2017

5975-01-591-3961
Electrical-Electronic Equipment Panel

015913961
4285249: RNCC: 3 | RNVC: 2

25 Jan 2011

5975-01-663-5036
Stuffing Tube

016635036
350578: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-663-7719
Cord Assembly Fastener

016637719
7458K16: RNCC: 3 | RNVC: 2

23 May 2017

5975-01-607-5785
Metallic Raceway Assembly

016075785
1234607-1: RNCC: 3 | RNVC: 2
1234607-1: RNCC: 3 | RNVC: 9

8 Jun 2012

5975-01-611-2253
Electrical Fitting Mounting Base

016112253
D5142110208: RNCC: 3 | RNVC: 2

7 Sep 2012

5975-01-612-8159
Electrical Equipment Rack

016128159
383573-001: RNCC: 3 | RNVC: 2

22 Oct 2012

5975-01-677-9840
Junction Box

016779840
4D07914G01: RNCC: 3 | RNVC: 2

15 Jan 2019

5975-01-678-8725
Electrical-Electronic Equipment Panel

016788725
MIC-BLANK: RNCC: 3 | RNVC: 2
MIC-BLANK: RNCC: 5 | RNVC: 2

1 Mar 2019

5975-01-676-9978
Junction Box Assembly

016769978
70550-82063-046: RNCC: 3 | RNVC: 2

21 Nov 2018

5975-01-676-0733
Electrical Equipment Mounting Base

016760733
011-02425-00: RNCC: 3 | RNVC: 2

11 Oct 2018

5975-01-586-9741
Electrical Equipment Mounting Base

015869741
74A880836-1001: RNCC: 3 | RNVC: 2

21 Jul 2010

5975-01-607-2055
Blade Server

016072055
09205012-01: RNCC: 3 | RNVC: 1
ATC6239: RNCC: 5 | RNVC: 1
912136239: RNCC: D | RNVC: 9

5 Jun 2012

5975-01-646-9087
Switch Box Case

016469087
V-1092: RNCC: 3 | RNVC: 2

4 Aug 2015

5975-01-625-4894
Metallic Raceway

016254894
80038800032: RNCC: 3 | RNVC: 9

5 Feb 2014

5975-01-625-5886
Electrical-Electronic Equipment Chassis

016255886
BK831B: RNCC: 3 | RNVC: 2

7 Feb 2014

5975-01-651-8337
Electrical Equipment Rack

016518337
3362454-1: RNCC: 3 | RNVC: 2

1 Feb 2016

5975-01-650-9250
Electrical Cable Protector

016509250
2200523-201: RNCC: 3 | RNVC: 2

21 Dec 2015

5975-01-624-4917
Electrical-Electronic Equipment Chassis

016244917
P5507FT-C: RNCC: 3 | RNVC: 2

6 Jan 2014

5975-01-694-6168
Electrical Cable Protector

016946168
102716: RNCC: 3 | RNVC: 2

13 Apr 2021

5975-01-692-9074

19 Jan 2021

5975-01-696-1367
Electrical-Electronic Equipment Chassis

016961367
72D420228-2001: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-6544
Electrical Equipment Shelf

016966544
1305AS1332-120: RNCC: 3 | RNVC: 2

9 Aug 2021

5975-01-695-5389
Electrical Equipment Rack

016955389
16E4148-1: RNCC: 3 | RNVC: 2

10 Jun 2021

5975-01-587-4980
Electrical Equipment Rack

015874980
1042: RNCC: 3 | RNVC: 2

9 Aug 2010

5975-01-601-5439
Electrical-Electronic Equipment Panel

016015439
86102-00: RNCC: 3 | RNVC: 9
86102-00: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-01-588-3383
Junction Box Terminal

015883383
TE-K60-4: RNCC: 3 | RNVC: 2

13 Sep 2010

5975-01-541-4056
Electrical Tie Down Mounting Base

015414056
SB6000UG2NY2P: RNCC: 3 | RNVC: 2
CB4020V3N8P: RNCC: 3 | RNVC: 2
9D0271P102: RNCC: 5 | RNVC: 2

26 Jun 2006

5975-01-643-8635
Electrical Equipment Drawer

016438635
00603000-04D: RNCC: 3 | RNVC: 2

14 Apr 2015

5975-01-542-2214
Electronic Junction Rack

015422214
32-104993-01: RNCC: 3 | RNVC: 2
32-104993-01: RNCC: 5 | RNVC: 9

26 Jul 2006

5975-01-644-7300
Transmission Line Grounding Set

016447300
GK-SUNV: RNCC: 3 | RNVC: 2
GK-SUNV: RNCC: 5 | RNVC: 2

18 May 2015

5975-01-649-5674
Mounting Plate

016495674
284A3224-6: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-537-5592
Electrical Conduit Adapter

015375592
62-0477-001: RNCC: 3 | RNVC: 2

13 Feb 2006

5975-01-535-0754
Electrical-Electronic Equipment Chassis

015350754
11440424: RNCC: 3 | RNVC: 2

14 Nov 2005

5975-01-541-5834
Electrical Equipment Mounting Base

015415834
RMT40-00-00: RNCC: 3 | RNVC: 9
RMT40-00-00: RNCC: 5 | RNVC: 9
RMT-40: RNCC: C | RNVC: 1

30 Jun 2006

5975-01-539-5145
Electrical-Electronic Equipment Panel

015395145
747-3046-010: RNCC: 3 | RNVC: 2

24 Apr 2006

5975-01-528-2224
Electrical Equipment Mounting Base

015282224
522-0801-018: RNCC: 3 | RNVC: 2

7 Mar 2005

5975-01-534-9408
Electrical Equipment Cabinet

015349408
083948-0004: RNCC: 3 | RNVC: 2

8 Nov 2005

5975-01-534-7580
Electrical-Electronic Equipment Chassis

015347580
BA36R-RA: RNCC: 3 | RNVC: 9
00-BA356-RA: RNCC: 5 | RNVC: 2

1 Nov 2005

5975-01-533-3968
Electronic Equipment Mounting Tray

015333968
047-04751-0004: RNCC: 3 | RNVC: 2

13 Sep 2005

5975-01-353-0345
Electrical Nonmetallic Conduit Assembly

013530345
5497312-39: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-357-3057
Flexible Metal Conduit

013573057
1567004-101: RNCC: 3 | RNVC: 2

21 Apr 1992

5975-01-343-9337
Electrical-Electronic Equipment Chassis

013439337
870655-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-696-7615
Electrical-Electronic Equipment Panel

016967615
2841B2040-3: RNCC: 3 | RNVC: 2

16 Aug 2021

5975-01-354-9208
Electrical Tie Down Mounting Base

013549208
ABMM: RNCC: 3 | RNVC: 2
802716-2: RNCC: 3 | RNVC: 2

7 Mar 1992

5975-01-357-9386
Electrical Box Connector

013579386
040-3304: RNCC: 3 | RNVC: 2

5 May 1992

5975-01-343-9124
Electrical Equipment Rack

013439124
256617-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9334
Electrical-Electronic Equipment Chassis

013439334
719725-3: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-691-6212
Electrical-Electronic Equipment Chassis

016916212
77A586733G106: RNCC: 3 | RNVC: 2

20 Oct 2020

5975-01-686-0645
Electrical-Electronic Equipment Chassis

016860645
RFE23050110-501: RNCC: 3 | RNVC: 2
RFE23050110-501: RNCC: 3 | RNVC: 9

28 Jan 2020

5975-01-692-9785
Line Supporting Strap

016929785
SPC35323: RNCC: 3 | RNVC: 2
99253631: RNCC: 5 | RNVC: 2

21 Jan 2021

5975-01-693-5200
Interconnecting Box

016935200
11130953: RNCC: 3 | RNVC: 2
U-TNA-ELE-603-C: RNCC: 5 | RNVC: 2

18 Feb 2021

5975-01-692-8249
Electrical Equipment Rack

016928249
AT-MMCR18-00: RNCC: 3 | RNVC: 2

13 Jan 2021

5975-01-694-5926
Interconnecting Box

016945926
000-056-094: RNCC: 3 | RNVC: 2

12 Apr 2021

5975-01-688-0484
Raceway Cover

016880484
39920-40205-10: RNCC: 3 | RNVC: 2

30 Apr 2020

5975-01-689-3312
Electrical-Electronic Equipment Panel

016893312
20-101-30: RNCC: 3 | RNVC: 2

16 Jun 2020

5975-01-687-6467
Electrical Components Tie Down Strap

016876467
T50R6M4: RNCC: 3 | RNVC: 2

10 Apr 2020

5975-01-687-3202
Electrical Equipment Rack

016873202
65-PRS11-100: RNCC: 3 | RNVC: 2

27 Mar 2020

5975-01-689-1943
Electrical Equipment Mounting Base

016891943
540594: RNCC: 3 | RNVC: 2

9 Jun 2020

5975-01-690-9211
Mounting Plate

016909211
PA-1137MG: RNCC: 3 | RNVC: 2

10 Sep 2020

5975-01-690-3115
Electrical Cable Ground Guard

016903115
FL2X1.75-B: RNCC: 3 | RNVC: 9
06494976: RNCC: 5 | RNVC: 2

5 Aug 2020

5975-01-687-3532
Electrical Equipment Rack

016873532
52000029: RNCC: 3 | RNVC: 2
CAS-00014-INT: RNCC: 5 | RNVC: 2

30 Mar 2020

5975-01-692-6838
Electrical Equipment Mounting Base

016926838
D3495452-0501: RNCC: 3 | RNVC: 2

5 Jan 2021

5975-01-693-0943
Electrical Cable Protector

016930943
804018001: RNCC: 3 | RNVC: 2

26 Jan 2021

5975-01-693-3868
Electrical Cable Protector

016933868
161-44200: RNCC: 3 | RNVC: 2
SBPAV09: RNCC: 5 | RNVC: 2

9 Feb 2021

5975-01-694-7630
Electrical-Electronic Equipment Chassis

016947630
MB3060/M: RNCC: 3 | RNVC: 2

22 Apr 2021

5975-01-694-8588
Electrical Equipment Cabinet

016948588
E3SXR6: RNCC: 3 | RNVC: 2

29 Apr 2021

5975-01-695-1967
Interconnecting Box

016951967
1590R1FBK: RNCC: 3 | RNVC: 2

20 May 2021

5975-01-695-5680
Electrical-Electronic Equipment Chassis

016955680
9450241: RNCC: 3 | RNVC: 2
H490983-215: RNCC: 5 | RNVC: 9

12 Jun 2021

5975-01-695-8251
Strain Electrical Conductor Clamp

016958251
1958-F: RNCC: 3 | RNVC: 2

24 Jun 2021

5975-01-695-7226
Electrical-Electronic Equipment Panel

016957226
MCM1U: RNCC: 3 | RNVC: 2

22 Jun 2021

5975-01-685-2984
Electrical-Electronic Equipment Chassis

016852984
RFE23050280-501: RNCC: 3 | RNVC: 2
RFE23050280-501: RNCC: 3 | RNVC: 9

10 Dec 2019

5975-01-490-2018
Electrical-Electronic Equipment Chassis

014902018
233450-101: RNCC: 3 | RNVC: 2

21 Sep 2001

5975-01-682-0516
Electrical Equipment Rack

016820516
P9K37A: RNCC: 3 | RNVC: 2
P9K37A: RNCC: 5 | RNVC: 2

18 Jul 2019

5975-01-490-4862
Electrical-Electronic Equipment Chassis

014904862
114E6227G1: RNCC: 3 | RNVC: 2

27 Sep 2001

5975-01-491-2979
Electrical Equipment Rack

014912979
1215359-301: RNCC: 3 | RNVC: 2

17 Oct 2001

5975-01-491-2984
Electrical Equipment Rack

014912984
1215760-301: RNCC: 3 | RNVC: 2

17 Oct 2001

5975-01-490-7742
Electronic Equipment Mounting Tray

014907742
09-2757055-110: RNCC: 3 | RNVC: 2

5 Oct 2001

5975-01-681-8284
Electrical Equipment Shelf

016818284
01.102.041.1.001: RNCC: 3 | RNVC: 2

9 Jul 2019

5975-01-682-2356
Chassis Base

016822356
72D420301-1001: RNCC: 3 | RNVC: 2

29 Jul 2019

5975-01-684-2629
Electrical Components Tie Down Strap

016842629
SPC35192: RNCC: 3 | RNVC: 2

28 Oct 2019

5975-01-685-7075
Nonmetallic Raceway

016857075
T70TRIW: RNCC: 3 | RNVC: 2

9 Jan 2020

5975-01-685-7480
Nonmetallic Raceway

016857480
T70TRCIW: RNCC: 3 | RNVC: 2

10 Jan 2020

5975-01-682-2012
Electrical Components Tie Down Strap

016822012
304-7082: RNCC: 3 | RNVC: 2

26 Jul 2019

5975-01-489-5361
Cable Hanger

014895361
B-7050-8388: RNCC: 3 | RNVC: 2

17 Sep 2001

5975-01-483-9930
Cable Marker Sleeve

014839930
2540806-78: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-9945
Cable Marker Sleeve

014839945
2540806-83: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-484-0364
Electrical-Electronic Equipment Chassis

014840364
C-GRR: RNCC: 3 | RNVC: 2

16 Apr 2001

5975-01-487-1720
Blank Panel

014871720
068528: RNCC: 3 | RNVC: 2

26 Jul 2001

5975-01-488-0918
Rigid Metal Conduit

014880918
5HM40037-107: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-486-4938
Electrical-Electronic Equipment Chassis

014864938
10513-3000-01: RNCC: 3 | RNVC: 2

29 Jun 2001

5975-01-665-9939
Electrical-Electronic Equipment Chassis

016659939
101ASM6055: RNCC: 3 | RNVC: 2

21 Aug 2017

5975-01-666-1275
Electrical-Electronic Equipment Panel

016661275
5258803-686: RNCC: 3 | RNVC: 2
5258803-686: RNCC: 5 | RNVC: 2

24 Aug 2017

5975-01-485-6997
Junction Box

014856997
Z72-96-54-AL60: RNCC: 3 | RNVC: 2
GC533B71: RNCC: 7 | RNVC: 2

4 Jun 2001

5975-01-483-9924
Cable Marker Sleeve

014839924
2540806-72: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-666-1451
Conduit Outlet

016661451
GRUE50-A: RNCC: 3 | RNVC: 2

28 Aug 2017

5975-01-666-5871
Electrical-Electronic Equipment Chassis

016665871
39278-90034-11: RNCC: 1 | RNVC: 2
7MH-000-1241: RNCC: 3 | RNVC: 2

13 Sep 2017

5975-01-666-6668
Electrical Equipment Shelf

016666668
352E3401-101: RNCC: 3 | RNVC: 2

15 Sep 2017

5975-01-663-9506
Electrical Equipment Drawer

016639506
1117897: RNCC: 3 | RNVC: 2
04060726000001: RNCC: 5 | RNVC: 2
B10031225: RNCC: 5 | RNVC: 2

31 May 2017

5975-01-664-2681
Electrical Equipment Cabinet

016642681
15200: RNCC: 3 | RNVC: 2

13 Jun 2017

5975-01-664-2138
Electrical Conductor Bushing

016642138
E26030: RNCC: 3 | RNVC: 2

9 Jun 2017

5975-01-663-4305
Electrical-Electronic Equipment Panel

016634305
SR03-01MK2: RNCC: 3 | RNVC: 2

9 May 2017

5975-01-662-9202
Electrical-Electronic Equipment Chassis

016629202
UHK81536-1: RNCC: 3 | RNVC: 2

21 Apr 2017

5975-01-663-4360
Electrical Equipment Rack

016634360
ACS-4330-RM-19=: RNCC: 3 | RNVC: 2

10 May 2017

5975-01-661-3133
Electrical Components Tie Down Strap

016613133
LWC75-A-L20: RNCC: 3 | RNVC: 2

27 Feb 2017

5975-01-658-9871
Electrical Equipment Rack

016589871
279413-01: RNCC: 3 | RNVC: 2

28 Oct 2016

5975-01-659-4341
Mounting Plate

016594341
39278-40161-1: RNCC: 3 | RNVC: 2

28 Nov 2016

5975-01-660-0433
Electrical Conduit Union

016600433
419395-1: RNCC: 3 | RNVC: 2

3 Jan 2017

5975-01-661-4541
Interior Cable Rack

016614541
AR8715: RNCC: 3 | RNVC: 2

3 Mar 2017

5975-01-660-8889
Electrical-Electronic Equipment Chassis

016608889
39593-40606-3: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-663-4187
Blank Panel

016634187
CMBIG-XIG: RNCC: 3 | RNVC: 2
CMBIG-XIG: RNCC: 5 | RNVC: 9

9 May 2017

5975-01-663-4910
Mounting Plate

016634910
68629-43114-1: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-659-4762
Line Supporting Strap

016594762
601-504: RNCC: 3 | RNVC: 2

29 Nov 2016

5975-01-663-1307
Junction Box Cover

016631307
4010036: RNCC: 3 | RNVC: 2

27 Apr 2017

5975-01-580-6529
Blank Panel

015806529
A5543-00004: RNCC: 3 | RNVC: 2

22 Dec 2009

5975-01-581-4636
Electrical Components Tie Down Strap

015814636
8433-1020-T: RNCC: 3 | RNVC: 2
8433-1020-T: RNCC: 5 | RNVC: 2
79DH420-00: RNCC: 5 | RNVC: 2
16N8732: RNCC: 5 | RNVC: 2

19 Jan 2010

5975-01-658-5285
Raceway Cover

016585285
39278-40201-2: RNCC: 3 | RNVC: 2

30 Sep 2016

5975-01-658-6824
Electrical Equipment Shelf

016586824
7-511113836-101: RNCC: 3 | RNVC: 2

12 Oct 2016

5975-01-581-3494
Electronic Junction Rack

015813494
SL-RACK-42-Z: RNCC: 3 | RNVC: 2

13 Jan 2010

5975-01-577-4228
Electrical Box Connector

015774228
4011568: RNCC: 3 | RNVC: 2
4011568: RNCC: 5 | RNVC: 2
10440075: RNCC: 6 | RNVC: 9

4 Sep 2009

5975-01-657-6362
Mounting Plate

016576362
39278-40121-3: RNCC: 3 | RNVC: 2

23 Aug 2016

5975-01-578-4901
Electrical Equipment Rack

015784901
RX2077-2: RNCC: 3 | RNVC: 2

7 Oct 2009

5975-01-658-5044
Electrical Equipment Drawer

016585044
1-1671260-1: RNCC: 3 | RNVC: 2

29 Sep 2016

5975-01-579-9828
Electrical Equipment Cabinet

015799828
AE-B-1999: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-580-1323
Electrical-Electronic Equipment Panel

015801323
51-0351-01J: RNCC: 3 | RNVC: 2

5 Dec 2009

5975-01-570-8172
Rht Mtg Pst Assy

015708172
744-3241-001: RNCC: 3 | RNVC: 2

14 Jan 2009

5975-01-572-2963
Electrical-Electronic Equipment Chassis

015722963
KAM/CHS/06U/D: RNCC: 3 | RNVC: 2

5 Mar 2009

5975-01-570-8173
Left Mtg Pst Assy

015708173
744-3242-001: RNCC: 3 | RNVC: 2

14 Jan 2009

5975-01-572-2623
Electrical-Electronic Equipment Chassis

015722623
77447000-009: RNCC: 3 | RNVC: 2

5 Mar 2009

5975-01-577-4640
Electrical-Electronic Equipment Chassis

015774640
1424M85G01: RNCC: 3 | RNVC: 2

8 Sep 2009

5975-01-572-8450
Electronic Equipment Mounting Tray

015728450
VE011-2003: RNCC: 3 | RNVC: 2

26 Mar 2009

5975-01-571-6322
Electrical-Electronic Equipment Chassis

015716322
5145700-1: RNCC: 3 | RNVC: 2

11 Feb 2009

5975-01-575-0683
Electrical Equipment Mounting Base

015750683
822-1511-003: RNCC: 3 | RNVC: 2

18 Jun 2009

5975-01-571-6478
Electrical Equipment Rack

015716478
E-MCR-05: RNCC: 3 | RNVC: 9
E-MCR-03: RNCC: 5 | RNVC: 9
E-MCR-04: RNCC: 5 | RNVC: 9
H327838-3: RNCC: D | RNVC: 9
H327838-4: RNCC: D | RNVC: 9
H327838-6: RNCC: D | RNVC: 9

11 Feb 2009

5975-01-569-8938
Cable Terminal Chamber

015698938
204-57425-5: RNCC: 3 | RNVC: 2

10 Dec 2008

5975-01-581-5689
Junction Box Cover

015815689
915405-1: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-563-4080
Electrical Bushing

015634080
RW309-4: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-613-0705
Electrical Components Tie Down Strap

016130705
PRT2S-M3: RNCC: 3 | RNVC: 2
PRT2S-M3: RNCC: 5 | RNVC: 2

29 Oct 2012

5975-01-591-0329
Mounting Plate

015910329
M045008: RNCC: 3 | RNVC: 2
M045008: RNCC: 3 | RNVC: 9

7 Jan 2011

5975-01-589-3702
Electrical-Electronic Equipment Panel

015893702
68A810412-1013: RNCC: 3 | RNVC: 2

23 Oct 2010

5975-01-591-0202
Mounting Plate

015910202
M033009: RNCC: 3 | RNVC: 2
M033009: RNCC: 3 | RNVC: 9

6 Jan 2011

5975-01-602-6856
Electrical Equipment Rack

016026856
HP P6500 EVA: RNCC: 3 | RNVC: 9

2 Feb 2012

5975-01-632-9144
Electrical-Electronic Equipment Chassis

016329144
32V05MMX36N3VC10: RNCC: 3 | RNVC: 2
PS820-100738-01: RNCC: 5 | RNVC: 2

3 Nov 2014

5975-01-629-1724
Electrical-Electronic Equipment Panel

016291724
1000811-1: RNCC: 3 | RNVC: 2

20 Jun 2014

5975-01-605-2458
Electrical Equipment Rack

016052458
SR-1042-N: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-603-7372
Electrical Equipment Rack

016037372
234672-B21: RNCC: 3 | RNVC: 2

13 Mar 2012

5975-01-597-7478
Electrical-Electronic Equipment Chassis

015977478
60-978-01: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-599-1824
Eprom

015991824
74434B64K1VERTBE: RNCC: 3 | RNVC: 1

14 Sep 2011

5975-01-596-2952
Blank Panel

015962952
401855-05: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-596-9020
Electrical-Electronic Equipment Chassis

015969020
472038-9: RNCC: 3 | RNVC: 2

25 May 2011

5975-01-597-4195
Electrical Components Tie Down Strap

015974195
AU2029: RNCC: 3 | RNVC: 2

9 Jun 2011

5975-01-597-1633
Electrical Equipment Rack

015971633
N6700B-908: RNCC: 3 | RNVC: 9
91912015: RNCC: 5 | RNVC: 2
N6700B-908: RNCC: C | RNVC: 1

31 May 2011

5975-01-592-1108
Electrical Equipment Rack

015921108
5230335-100: RNCC: 3 | RNVC: 2

22 Feb 2011

5975-01-593-2557
Electrical Equipment Shelf

015932557
352E3303-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5975-01-592-7134
Junction Box

015927134
A606CHQR: RNCC: 3 | RNVC: 2
52860-440: RNCC: 5 | RNVC: 2
HOFA606CHQR: RNCC: 5 | RNVC: 9

16 Mar 2011

5975-01-592-7127
Electrical Equipment Mounting Base

015927127
M113087-101: RNCC: 3 | RNVC: 2
M113087-101: RNCC: 3 | RNVC: 9

16 Mar 2011

5975-01-594-8787
Cable Marker Sleeve

015948787
KTMS501-4(5): RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-592-7137
Junction Box

015927137
A806CHQR: RNCC: 3 | RNVC: 2
HOFA806CHQR: RNCC: 5 | RNVC: 9

16 Mar 2011

5975-01-593-4383
Conduit Connector

015934383
APPST100: RNCC: 3 | RNVC: 9
52257-000: RNCC: 5 | RNVC: 2

7 Apr 2011

5975-01-594-8795
Cable Marker Sleeve

015948795
KTMS501-4(2): RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-589-0424
Electrical-Electronic Equipment Chassis

015890424
NC316-288PMC4X: RNCC: 3 | RNVC: 2

15 Oct 2010

5975-01-588-8492
Stuffing Tube Adapter

015888492
630 B 022 NF 10 B: RNCC: 3 | RNVC: 2

6 Oct 2010

5975-01-588-7515
Electrical Components Tie Down Strap

015887515
FOL500-50-0: RNCC: 3 | RNVC: 2
2508472891: RNCC: 5 | RNVC: 2
HT2804 REF. E2 1730: RNCC: 5 | RNVC: 2
25993022: RNCC: 5 | RNVC: 2
FOL500-50-0: RNCC: 5 | RNVC: 9

1 Oct 2010

5975-01-589-1850
Electrical Equipment Rack

015891850
NGC-009: RNCC: 3 | RNVC: 2

20 Oct 2010

5975-01-591-7041
Kickstand

015917041
FG5965-12: RNCC: 3 | RNVC: 2
MVP-KS: RNCC: 3 | RNVC: 2

4 Feb 2011

5975-01-588-2784
Control Box Frame

015882784
549-3611-003: RNCC: 3 | RNVC: 2

10 Sep 2010

5975-01-588-8727
Electrical Equipment Cabinet

015888727
OR-43500090: RNCC: 3 | RNVC: 2

7 Oct 2010

5975-01-586-2887
Electrical Components Tie Down Strap

015862887
W54220-002: RNCC: 3 | RNVC: 2

22 Jun 2010

5975-01-082-6648
Conduit Outlet

010826648
FSX-1: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-01-585-4479
Metallic Raceway

015854479
62828-40198: RNCC: 3 | RNVC: 2

26 May 2010

5975-01-585-8411
Electrical Equipment Mounting Base

015858411
107678: RNCC: 3 | RNVC: 2

8 Jun 2010

5975-01-585-6786
Electronic Equipment Mounting Tray

015856786
420-1381: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-01-565-2121
Junction Box Cover

015652121
60937: RNCC: 3 | RNVC: 2

16 Jul 2008

5975-00-665-3644
Stuffing Tube

006653644
89-9101ISSUEB: RNCC: 3 | RNVC: 9
101167-36-00-0: RNCC: 5 | RNVC: 2
89-9101ISSUEB: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-616-5234
Stuffing Tube

016165234
4266016: RNCC: 3 | RNVC: 2

19 Feb 2013

5975-01-616-2820
Electrical-Electronic Equipment Chassis

016162820
11-0517: RNCC: 3 | RNVC: 2

7 Feb 2013

5975-01-583-6988
Electrical Drawer

015836988
8102700-04: RNCC: 3 | RNVC: 2

1 Apr 2010

5975-01-615-7200
Interconnecting Box

016157200
20-401-01: RNCC: 3 | RNVC: 2

22 Jan 2013

5975-01-614-6714
Electrical Standardized Components Case

016146714
570351G1: RNCC: 3 | RNVC: 2

12 Dec 2012

5975-01-582-2480
Electrical Equipment Mounting Base

015822480
653-2890-003: RNCC: 3 | RNVC: 2

12 Feb 2010

5975-01-583-6947
Electrical Chassis

015836947
269162G1: RNCC: 3 | RNVC: 2
269162: RNCC: 5 | RNVC: 9

1 Apr 2010

5975-01-616-6373
Electrical Equipment Cabinet

016166373
7420700-40: RNCC: 3 | RNVC: 2

22 Feb 2013

5975-01-583-2338
Electrical Equipment Mounting Base

015832338
5406-02-0006: RNCC: 3 | RNVC: 2

19 Mar 2010

5975-00-907-6773
Stuffing Tube

009076773
8427051: RNCC: 3 | RNVC: 2

22 Jun 1966

5975-01-613-2480
Electrical Equipment Rack

016132480
AR2900: RNCC: 3 | RNVC: 2

2 Nov 2012

5975-01-614-8535
Nonmetallic Raceway

016148535
2299979-1: RNCC: 3 | RNVC: 2
2299979-1: RNCC: 5 | RNVC: 2

17 Dec 2012

5975-01-613-8832
Junction Box Cover

016138832
204-53276-3: RNCC: 3 | RNVC: 2

20 Nov 2012

5975-01-614-8873
Electrical Equipment Rack

016148873
701M6630: RNCC: 3 | RNVC: 2

18 Dec 2012

5975-01-468-9228
Electrical Conduit Ferrule

014689228
FERRULE SET 0032: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-467-4476
Electrical Equipment Drawer

014674476
DE75I-SW: RNCC: 3 | RNVC: 9

30 Aug 1999

5975-01-611-8956
Electrical-Electronic Equipment Chassis

016118956
2841B1691-1: RNCC: 3 | RNVC: 2

27 Sep 2012

5975-01-612-7908
Electrical-Electronic Equipment Chassis

016127908
6014255-001: RNCC: 3 | RNVC: 2

22 Oct 2012

5975-01-612-4032
Metallic Raceway Assembly

016124032
0721400-13: RNCC: 3 | RNVC: 2
0721400-13: RNCC: 3 | RNVC: 9

10 Oct 2012

5975-01-609-9991
Electrical Box Connector

016099991
GHFC-1-90: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-358-5824
Conduit Outlet

013585824
8988772-10: RNCC: 3 | RNVC: 2

16 May 1992

5975-01-103-3911
Stuffing Tube

011033911
136-05: RNCC: 3 | RNVC: 2

12 Nov 1980

5975-01-334-6449
Support Electrical Bracket

013346449
13029035: RNCC: 3 | RNVC: 2

24 Feb 1991

5975-01-363-3583
Stuffing Tube

013633583
CTGS10EGG: RNCC: 3 | RNVC: 2
O5A193-06: RNCC: 5 | RNVC: 2

28 Aug 1992

5975-01-371-0663
Stuffing Tube

013710663
27082-548: RNCC: 3 | RNVC: 2

5 Feb 1993

5975-01-203-0018
Stuffing Tube

012030018
G2331A20S: RNCC: 3 | RNVC: 2

9 Mar 1985

5975-01-412-7477
Conduit Outlet

014127477
E984E: RNCC: 3 | RNVC: 9

27 Apr 1995

5975-01-608-9040
Stuffing Tube

016089040
WB1811B: RNCC: 3 | RNVC: 2

13 Jul 2012

5975-01-608-0813
Electrical Equipment Foot

016080813
100044: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-607-3912
Electronic Equipment Mounting Tray

016073912
MT6-4359-101: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-608-1599
Electrical Equipment Rack

016081599
922354-11: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-606-2785
Electrical-Electronic Equipment Chassis

016062785
780321-01: RNCC: 3 | RNVC: 2

15 May 2012

5975-01-565-5085
Electrical Fitting Mounting Base

015655085
5140054-1-EEB: RNCC: 3 | RNVC: 2

28 Jul 2008

5975-00-178-0595
Stuffing Tube

001780595
9S5010LALT17TYPE22BSYMB0L1902: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-097-0177
Stuffing Tube

000970177
M19622-5-006: RNCC: 2 | RNVC: 2
MIL-S-19622-5: RNCC: 4 | RNVC: 1

13 Dec 1972

5975-00-472-6033
Conduit Outlet

004726033
FD3100: RNCC: 3 | RNVC: 2
066703: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-208-6705
Conduit Outlet

002086705
C29: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-355-4801
Stuffing Tube

003554801
9S5235LREV18SYMB0L1551-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0578
Stuffing Tube

001780578
9S5010LALT17TYPE21SIZEM: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-355-4802
Stuffing Tube

003554802
9S5235LREV18SYMB0L1551-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-114-9855
Conduit Outlet

001149855
30204: RNCC: 3 | RNVC: 2
252: RNCC: 3 | RNVC: 2
B-33: RNCC: 5 | RNVC: 9

24 Dec 1972

5975-01-419-2880
Electrical Components Tie Down Strap

014192880
16322498: RNCC: 3 | RNVC: 9

18 Sep 1995

5975-01-378-4289
Electrical Entrance Elbow

013784289
13029884: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-423-1326
Blank Panel

014231326
93-ADL: RNCC: 3 | RNVC: 9
93-ADLF00M00R00: RNCC: 5 | RNVC: 9

15 Dec 1995

5975-01-360-6919
Electrical-Electronic Equipment Chassis

013606919
12-050F00M00R01: RNCC: 3 | RNVC: 9

29 Jun 1992

5975-01-520-4130
Electronic Junction Rack

015204130
VM83H: RNCC: 3 | RNVC: 9

11 May 2004

5975-01-491-3631
Electrical Grounding Plate

014913631
17-903F01M00R02: RNCC: 3 | RNVC: 9

18 Oct 2001

5975-01-487-1271
Electrical-Electronic Equipment Chassis

014871271
709-10-040: RNCC: 3 | RNVC: 9
709-10-040: RNCC: 5 | RNVC: 9

25 Jul 2001

5975-01-488-5025
Electrical-Electronic Equipment Chassis

014885025
709-102-021-2: RNCC: 3 | RNVC: 9
709-102-021-2: RNCC: 5 | RNVC: 9

27 Aug 2001

5975-01-662-2041
Electrical Components Tie Down Strap

016622041
100014933: RNCC: 3 | RNVC: 2

29 Mar 2017

5975-00-548-9547
Rigid Metal Conduit

005489547
10-79890: RNCC: 3 | RNVC: 9
10-79890: RNCC: 5 | RNVC: 9
10-79890: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-683-5577
Electrical Cable Protector

016835577
865774T01: RNCC: 3 | RNVC: 2

26 Sep 2019

5975-01-681-4508
Electrical Bonding Ring

016814508
TR-600: RNCC: 3 | RNVC: 2
3192-038: RNCC: 3 | RNVC: 9

18 Jun 2019

5975-01-682-1340
Electronic Equipment Mounting Tray

016821340
805-18070- 001: RNCC: 3 | RNVC: 2

24 Jul 2019

5975-01-564-0661
Electrical Standardized Components Case

015640661
1664 CASE: RNCC: 3 | RNVC: 2

3 Jun 2008

5975-01-534-8380
Electrical Grounding Plate

015348380
152939-1: RNCC: 3 | RNVC: 2

3 Nov 2005

5975-01-676-1564
Mounting Plate

016761564
720863-B21: RNCC: 3 | RNVC: 2

15 Oct 2018

5975-01-676-3919
Electronic Equipment Mounting Tray

016763919
UWA21401-1: RNCC: 3 | RNVC: 2

25 Oct 2018

5975-01-678-8729
Electric Cable Joint Box

016788729
112-1026-0: RNCC: 3 | RNVC: 2

1 Mar 2019

5975-01-679-5347
Electrical Equipment Cabinet

016795347
CB73093-001: RNCC: 3 | RNVC: 2

28 Mar 2019

5975-01-680-1575
Cable Hanger

016801575
252116: RNCC: 3 | RNVC: 9
SSH-114: RNCC: 5 | RNVC: 9

22 Apr 2019

5975-01-672-6236
Electronic Equipment Mounting Tray

016726236
26020396-101: RNCC: 3 | RNVC: 2

10 May 2018

5975-01-565-9476
Electrical Conduit Adapter

015659476
712AL116A4048C: RNCC: 3 | RNVC: 2

13 Aug 2008

5975-01-079-4383
Electrical-Electronic Equipment Chassis

010794383
326467-1: RNCC: 3 | RNVC: 2
842432-1: RNCC: 5 | RNVC: 9

6 Jul 1979

5975-01-080-4914
Electrical-Electronic Equipment Chassis

010804914
326093-1: RNCC: 3 | RNVC: 2

27 Jul 1979

5975-01-082-2882
Grounding Strap

010822882
877381: RNCC: 3 | RNVC: 2

30 Aug 1979

5975-01-138-1155
Electrical-Electronic Equipment Chassis

011381155
11-198F01M00R01: RNCC: 3 | RNVC: 9

7 Sep 1982

5975-01-662-1116
Electrical-Electronic Equipment Panel

016621116
65036-101-00: RNCC: 3 | RNVC: 2

27 Mar 2017

5975-01-678-9959
Electrical-Electronic Equipment Chassis

016789959
MX104-AC: RNCC: 3 | RNVC: 2
MX104-AC: RNCC: 5 | RNVC: 2

6 Mar 2019

5975-01-679-5534
Electrical-Electronic Equipment Panel

016795534
CB04478-001: RNCC: 3 | RNVC: 2

29 Mar 2019

5975-01-680-2605
Junction Box Cover

016802605
163286: RNCC: 3 | RNVC: 2
163286: RNCC: 5 | RNVC: 2

25 Apr 2019

5975-01-680-2877
Blank Panel

016802877
771108: RNCC: 3 | RNVC: 2
771108: RNCC: 5 | RNVC: 2

26 Apr 2019

5975-01-680-4818
Electrical-Electronic Equipment Chassis

016804818
ACP-2000EBP-00BE: RNCC: 3 | RNVC: 2

7 May 2019

5975-01-684-2555
Chassis Base

016842555
GVS-HC101: RNCC: 3 | RNVC: 2

28 Oct 2019

5975-01-685-6674
Electrical-Electronic Equipment Chassis

016856674
K10055570-4: RNCC: 3 | RNVC: 2

7 Jan 2020

5975-01-685-8038
Blank Panel

016858038
775-1450-0000: RNCC: 3 | RNVC: 2

14 Jan 2020

5975-01-688-8086
Electrical-Electronic Equipment Chassis

016888086
IONFP: RNCC: 3 | RNVC: 9
92009360: RNCC: 5 | RNVC: 2

27 May 2020

5975-01-560-7831
Cable Terminal Chamber

015607831
QTPET025-MOXB-MOXT-DND: RNCC: 3 | RNVC: 2

12 Feb 2008

5975-01-562-6505
Electronic Equipment Mounting Tray

015626505
16E2119-5: RNCC: 3 | RNVC: 2

15 Apr 2008

5975-01-667-1248
Electronic Equipment Mounting Tray

016671248
3353170-1: RNCC: 3 | RNVC: 2

4 Oct 2017

5975-01-685-2973
Electrical-Electronic Equipment Chassis

016852973
RFE23050270-501: RNCC: 3 | RNVC: 2
RFE23050270-501: RNCC: 3 | RNVC: 9

10 Dec 2019

5975-01-669-2570
Electrical-Electronic Equipment Chassis

016692570
UCSB-5108-AC2: RNCC: 3 | RNVC: 2

2 Jan 2018

5975-01-669-2171
Electrical Equipment Drawer

016692171
1020995: RNCC: 3 | RNVC: 2
1020995: RNCC: 5 | RNVC: 2

28 Dec 2017

5975-01-563-7748
Switch Box Case

015637748
62115-4: RNCC: 3 | RNVC: 2

21 May 2008

5975-01-564-0659
Electrical-Electronic Equipment Chassis

015640659
115-00294-00: RNCC: 3 | RNVC: 2

3 Jun 2008

5975-01-564-1075
Electrical Bonding Ring

015641075
12975A: RNCC: 3 | RNVC: 2

4 Jun 2008

5975-01-563-7740
Electrical-Electronic Equipment Chassis

015637740
071-04049-0000: RNCC: 3 | RNVC: 2
975.96.32.310: RNCC: 5 | RNVC: 2
071-4049-00: RNCC: 5 | RNVC: 2
3614379-6001: RNCC: 5 | RNVC: 2

21 May 2008

5975-01-590-3403
Electrical-Electronic Equipment Panel

015903403
PAN-ENC2424WDF4: RNCC: 3 | RNVC: 9

1 Dec 2010

5975-01-581-5705
Junction Box Cover

015815705
915689-3: RNCC: 3 | RNVC: 2

21 Jan 2010

5975-01-581-6560
Junction Box

015816560
914020-3: RNCC: 3 | RNVC: 2

25 Jan 2010

5975-01-678-6919
Electrical-Electronic Equipment Chassis

016786919
MX80-T-AC: RNCC: 3 | RNVC: 2
MX80-T-AC: RNCC: 5 | RNVC: 2

20 Feb 2019

5975-01-678-6034
Electrical Equipment Rack

016786034
AMT2241: RNCC: 3 | RNVC: 2

14 Feb 2019

5975-01-559-7682
Electrical Equipment Rack

015597682
371-1480: RNCC: 3 | RNVC: 2
X8099A-4: RNCC: 5 | RNVC: 2

4 Jan 2008

5975-01-557-7995
Electrical Equipment Drawer

015577995
MD101: RNCC: 3 | RNVC: 2
25014982: RNCC: 5 | RNVC: 2

29 Oct 2007

5975-01-557-2783
Electrical Equipment Rack

015572783
XTA-3000-1URK-19UZ: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-558-1977
Electrical Conduit Ferrule

015581977
RP2120-EM12-T: RNCC: 3 | RNVC: 1
302-7006849ITEM80: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-557-9705
Electrical Equipment Rack

015579705
RACK-40U-60: RNCC: 3 | RNVC: 2

31 Oct 2007

5975-01-534-0160
Electrical-Electronic Equipment Chassis

015340160
20511585-501: RNCC: 3 | RNVC: 2

4 Oct 2005

5975-01-534-1145
Telescoping Bushing

015341145
0700550054: RNCC: 3 | RNVC: 2

7 Oct 2005

5975-01-536-8928
Telemetry Bracket Spacer

015368928
ICE10ITAS20591-2: RNCC: 3 | RNVC: 2

19 Jan 2006

5975-01-539-5550
Electrical Equipment Rack

015395550
R3-230: RNCC: 3 | RNVC: 2
2410T0G7R3-230: RNCC: 5 | RNVC: 9

25 Apr 2006

5975-01-536-0755
Flexible Metal Conduit Assembly

015360755
227654-DL0000: RNCC: 3 | RNVC: 2

19 Dec 2005

5975-01-523-6106
Rack Stabilizer Kit

015236106
246107-B21: RNCC: 3 | RNVC: 2

9 Sep 2004

5975-01-527-5186
Electrical Equipment Mounting Base

015275186
525-10186-609: RNCC: 3 | RNVC: 2

4 Feb 2005

5975-00-194-8130
Electrical Equipment Cabinet

001948130
SCC34271: RNCC: 3 | RNVC: 2
CY826GRC26: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-223-9842
Electrical Equipment Cabinet

002239842
CH153: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-01-571-5630
Electrical Equipment Mounting Base

015715630
70225-101: RNCC: 3 | RNVC: 2

9 Feb 2009

5975-01-650-3067
Strain Electrical Conductor Clamp

016503067
MCS2323-11: RNCC: 3 | RNVC: 2

27 Nov 2015

5975-01-651-7102
Electrical-Electronic Equipment Panel

016517102
FRME2: RNCC: 3 | RNVC: 2

27 Jan 2016

5975-01-557-7093
Safety Shorting Probe

015577093
ACC1-6A-12-A-8: RNCC: 3 | RNVC: 2

25 Oct 2007

5975-01-557-8639
Faceplate Flush Mou

015578639
NK6FIWY: RNCC: 3 | RNVC: 2

30 Oct 2007

5975-01-555-8379
Universal Box

015558379
P 252612: RNCC: 3 | RNVC: 2
507-5532: RNCC: 5 | RNVC: 2

14 Sep 2007

5975-01-556-0916
Electronic Junction Rack

015560916
8002219-10: RNCC: 3 | RNVC: 9

24 Sep 2007

5975-01-581-6708
Junction Box

015816708
914021-5: RNCC: 3 | RNVC: 2

25 Jan 2010

5975-01-582-7186
Electrical Equipment Rack

015827186
5063-9216: RNCC: 3 | RNVC: 2
5063-9216: RNCC: 3 | RNVC: 9

3 Mar 2010

5975-01-600-0237
Box Assembly Operator

016000237
241977: RNCC: 3 | RNVC: 2

3 Nov 2011

5975-01-527-5677
Electrical Components Tie Down Strap

015275677
PLT3S-M10: RNCC: 3 | RNVC: 2
1132775S00: RNCC: 5 | RNVC: 2

8 Feb 2005

5975-01-514-7793
Flexible Nonmetallic Conduit

015147793
749-656-6-71.75: RNCC: 3 | RNVC: 2
5D0562-1: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-060-2561
Cable Marker Sleeve

010602561
ST650713A19P36: RNCC: 3 | RNVC: 2

18 May 1978

5975-01-374-4565
Stuffing Tube

013744565
6190962: RNCC: 3 | RNVC: 2

23 Apr 1993

5975-01-322-5247
Radome Support

013225247
WP-11020: RNCC: 3 | RNVC: 2

9 Jul 1990

5975-01-475-2390
Rigid Metal Conduit

014752390
75A321224-2003: RNCC: 3 | RNVC: 2

25 May 2000

5975-01-650-3370
Cable Hanger

016503370
CLAMP-105: RNCC: 3 | RNVC: 2

30 Nov 2015

5975-01-553-5894
Electrical Equipment Mounting Base

015535894
52-111-000: RNCC: 3 | RNVC: 2

19 Jul 2007

5975-01-566-1898
Electrical Conduit Adapter

015661898
712HL116A2532C: RNCC: 3 | RNVC: 2

22 Aug 2008

5975-01-578-5058
Electrical-Electronic Equipment Chassis

015785058
ACP-4000MB-00XE: RNCC: 3 | RNVC: 2

8 Oct 2009

5975-01-510-0025
Electrical Equipment Mounting Base

015100025
KC44024-015: RNCC: 3 | RNVC: 2

10 Jul 2003

5975-01-220-9834
Electrical Equipment Cabinet

012209834
8418B: RNCC: 3 | RNVC: 2
8418B: RNCC: 3 | RNVC: 9
8418B: RNCC: 5 | RNVC: 9

22 Nov 1985

5975-01-505-2532
Electrical-Electronic Equipment Chassis

015052532
ECIMLN-MSW5049-4: RNCC: 3 | RNVC: 2
ECIMLN-MSW5049-4: RNCC: 5 | RNVC: 9

27 Feb 2003

5975-01-467-7710
Cable Marker Sleeve

014677710
TMS-SCE-1/2-2.0-S3-4: RNCC: 3 | RNVC: 2
TMS-SCE-1/2-2.0-S3-4: RNCC: 5 | RNVC: 2

14 Sep 1999

5975-01-649-0249
Electrical Cable Protector

016490249
VC-406-8-BLACK: RNCC: 3 | RNVC: 2

15 Oct 2015

5975-01-648-8358
Junction Box Extension

016488358
284A3223-21: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-648-6659
Reinforcing Tank Ve

016486659
25-8PT531-5: RNCC: 3 | RNVC: 2
25-8PT531-5: RNCC: 3 | RNVC: 9

1 Oct 2015

5975-01-649-4905
Electrical-Electronic Equipment Panel

016494905
CB04528-001: RNCC: 3 | RNVC: 2

30 Oct 2015

5975-01-649-6031
Electrical-Electronic Equipment Chassis

016496031
12011-6010-02: RNCC: 3 | RNVC: 2

4 Nov 2015

5975-01-552-5945
Rigid Metal Conduit

015525945
CONDUIT,GALVANIZED,5.0 IN.,20 FT: RNCC: 3 | RNVC: 2

19 Jun 2007

5975-01-552-0706
Guide Rail

015520706
CTJ-3D-03: RNCC: 3 | RNVC: 2

5 Jun 2007

5975-01-576-7167
Electrical Equipment Cabinet

015767167
LL5-DLX-185: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-542-1444
Bus Coupler

015421444
62-678172: RNCC: 3 | RNVC: 2
62-678172: RNCC: 5 | RNVC: 9

24 Jul 2006

5975-01-545-5198
Cable Strain Relief Bushing

015455198
3305: RNCC: 3 | RNVC: 2

15 Nov 2006

5975-01-544-2512
Electrical-Electronic Equipment Chassis

015442512
7A11800H02-C: RNCC: 3 | RNVC: 2

6 Oct 2006

5975-01-546-0445
Base Elect Mounting

015460445
MS21065L3-8-9: RNCC: 3 | RNVC: 2

4 Dec 2006

5975-01-545-3614
Electrical-Electronic Equipment Chassis

015453614
8138745: RNCC: 3 | RNVC: 2
T0078239: RNCC: 5 | RNVC: 2
T0078239: RNCC: 5 | RNVC: 2

9 Nov 2006

5975-01-601-3483
Electrical Cable Nipple

016013483
232N3V02: RNCC: 3 | RNVC: 9

19 Jan 2012

5975-01-648-7701
Electrical Equipment Shelf

016487701
M0DREF266094: RNCC: 3 | RNVC: 2

6 Oct 2015

5975-01-649-0229
Guide Rail

016490229
25-6NF1373A: RNCC: 3 | RNVC: 2
25-6NF1373A: RNCC: 3 | RNVC: 9

15 Oct 2015

5975-01-576-8242
Ground Rod

015768242
586SS3AT: RNCC: 3 | RNVC: 2

15 Aug 2009

5975-00-616-8907
Stuffing Tube

006168907
6168907: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-233-3836
Electrical Components Tie Down Strap

012333836
16-386F00M00R00: RNCC: 3 | RNVC: 9
16-386: RNCC: 5 | RNVC: 9

30 May 1986

5975-01-598-7034
Electrical-Electronic Equipment Panel

015987034
7251229: RNCC: 3 | RNVC: 2

22 Aug 2011

5975-01-645-5368
Pothead

016455368
195144-01: RNCC: 3 | RNVC: 2
195144-01: RNCC: 3 | RNVC: 9
195146: RNCC: D | RNVC: 9

19 Jun 2015

5975-01-645-6704
Blank Panel

016456704
70550-82020-059: RNCC: 3 | RNVC: 2

24 Jun 2015

5975-01-646-0843
Electrical-Electronic Equipment Chassis

016460843
5095-1000-25: RNCC: 3 | RNVC: 2

13 Jul 2015

5975-01-646-8001
Electrical Equipment Rack

016468001
05.010.004.1: RNCC: 3 | RNVC: 2

30 Jul 2015

5975-01-647-0779
Junction Box Assembly

016470779
G-101-5809-3: RNCC: 3 | RNVC: 2

11 Aug 2015

5975-01-647-4926
Blank Panel

016474926
304A026-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-647-9483
Mounting Plate

016479483
25414191: RNCC: 3 | RNVC: 2

9 Sep 2015

5975-01-648-1163
Electrical Cable Protector

016481163
BGF.0M.100.XAV: RNCC: 3 | RNVC: 2

15 Sep 2015

5975-01-646-8127
Electrical Cable Protector

016468127
FL1X4-O: RNCC: 3 | RNVC: 9
06494959: RNCC: 5 | RNVC: 2
A03332A-01: RNCC: 5 | RNVC: 2
A03332A-01: RNCC: 5 | RNVC: 2
06494959: RNCC: 5 | RNVC: 9

31 Jul 2015

5975-01-547-6041
Blank Panel

015476041
190-00318: RNCC: 3 | RNVC: 2

25 Jan 2007

5975-01-547-4284
Power Distribu Rack

015474284
39Y8952: RNCC: 3 | RNVC: 2

19 Jan 2007

5975-01-548-8108
Electrical Entrance Elbow

015488108
6980766: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-01-548-8790
Electrical Equipment Cabinet

015488790
6374706: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-01-549-1059
Electrical Equipment Cabinet

015491059
DELL 4210: RNCC: 3 | RNVC: 2

12 Mar 2007

5975-01-548-8888
Electrical Equipment Mounting Base

015488888
740-33416-2: RNCC: 3 | RNVC: 2

6 Mar 2007

5975-01-549-4814
Electrical-Electronic Equipment Chassis

015494814
629-8472-001: RNCC: 3 | RNVC: 2

21 Mar 2007

5975-01-550-0897
Electrical-Electronic Equipment Panel

015500897
204441-1: RNCC: 3 | RNVC: 2

9 Apr 2007

5975-01-597-8130
Junction Box

015978130
07221408-1: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-573-8581
Electrical Equipment Rack

015738581
RX1650-500: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-598-8613
Electrical Nonmetallic Conduit Assembly

015988613
254089: RNCC: 3 | RNVC: 2

30 Aug 2011

5975-01-529-0610
Rigid Metal Conduit Assembly

015290610
5HM40133-101: RNCC: 3 | RNVC: 2

1 Apr 2005

5975-01-534-8384
Electrical Grounding Plate

015348384
152942-1: RNCC: 3 | RNVC: 2

3 Nov 2005

5975-01-535-9234
Flexible Metal Conduit

015359234
227650-DL0000: RNCC: 3 | RNVC: 2

14 Dec 2005

5975-01-539-7905
Electrical-Electronic Equipment Chassis

015397905
14024105: RNCC: 3 | RNVC: 2
241 1EG5214024105: RNCC: C | RNVC: 1

2 May 2006

5975-01-539-7904
Electrical-Electronic Equipment Chassis

015397904
14024104: RNCC: 3 | RNVC: 2
241 1EG5214024104: RNCC: C | RNVC: 1

2 May 2006

5975-01-538-9020
Electrical Tie Down Mounting Base

015389020
TM3S10M0: RNCC: 3 | RNVC: 2

3 Apr 2006

5975-00-796-8397
Slide

007968397
29495-3: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-01-615-1188
Electrical Box Connector

016151188
CONN278 10 PF DB9: RNCC: 3 | RNVC: 2

28 Dec 2012

5975-01-597-7646
Electrical Equipment Mounting Base

015977646
6477522: RNCC: 3 | RNVC: 2

20 Jun 2011

5975-01-644-3337
Electrical-Electronic Equipment Chassis

016443337
617-8762-010: RNCC: 3 | RNVC: 2

30 Apr 2015

5975-01-547-3213
Electrical Chassis

015473213
R466977-01: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-593-5176
Junction Box

015935176
500614-COUG: RNCC: 3 | RNVC: 2
52859-440: RNCC: 5 | RNVC: 2

8 Apr 2011

5975-01-594-5248
Electrical-Electronic Equipment Chassis

015945248
554-2664-005: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-593-4382
Flexible Conduit

015934382
ANAEFSTGRY1IN/CUT: RNCC: 3 | RNVC: 9

7 Apr 2011

5975-01-372-2373
Electrical Equipment Mounting Base

013722373
10112: RNCC: 3 | RNVC: 2
17B9E1000-523: RNCC: 5 | RNVC: 2

4 Mar 1993

5975-01-527-9360
Cable Marker Sleeve

015279360
RPS-18-12/2.0-9: RNCC: 3 | RNVC: 2

24 Feb 2005

5975-01-154-9194
Electrical Equipment Mounting Base

011549194
622-1680-005: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-01-642-4744
Electrical Conduit Adapter

016424744
25-7MC1141: RNCC: 3 | RNVC: 2
25-7MC1141: RNCC: 3 | RNVC: 9

26 Feb 2015

5975-01-641-9683
Junction Box Cover

016419683
115-00500-04: RNCC: 3 | RNVC: 2

9 Feb 2015

5975-01-643-3407
Electrical Standardized Components Case

016433407
PWR-CAS-FLS01: RNCC: 3 | RNVC: 9
PWR-CAS-FLS01: RNCC: 5 | RNVC: 2
PWR-CAS-FLS01: RNCC: 5 | RNVC: 9

30 Mar 2015

5975-01-544-7005
Cable Hanger

015447005
073041282: RNCC: 3 | RNVC: 2

19 Oct 2006

5975-01-589-3840
Electrical Equipment Mounting Base

015893840
M123000: RNCC: 3 | RNVC: 2
M123000: RNCC: 3 | RNVC: 9

25 Oct 2010

5975-01-591-0825
Electrical Equipment Rack

015910825
915901: RNCC: 3 | RNVC: 2

10 Jan 2011

5975-01-413-7069
Electrical Box Connector

014137069
C35612: RNCC: 3 | RNVC: 9

19 May 1995

5975-01-605-2227
Electrical Equipment Cabinet

016052227
DN-19 22U-6/8-EC: RNCC: 3 | RNVC: 2

17 Apr 2012

5975-01-605-2232
Electrical-Electronic Equipment Chassis

016052232
A90-D SUN BLADE: RNCC: 3 | RNVC: 2

17 Apr 2012

5975-01-633-1084
Wire Strand Hanger

016331084
5200: RNCC: 3 | RNVC: 2

7 Nov 2014

5975-01-632-6542
Transmission Line Grounding Set

016326542
097867: RNCC: 3 | RNVC: 2

27 Oct 2014

5975-01-633-6770
Electrical Equipment Shelf

016336770
7-511115140-13: RNCC: 3 | RNVC: 2

1 Dec 2014

5975-01-697-4735
Electronic Equipment Mounting Tray

016974735
Z95-0006-101: RNCC: 3 | RNVC: 2

22 Sep 2021

5975-01-696-7803
Electrical Cable Protector

016967803
5517801: RNCC: 3 | RNVC: 2
5517801: RNCC: 3 | RNVC: 2

17 Aug 2021

5975-01-695-6802
Electrical Cable Nipple

016956802
AA59178-3E: RNCC: 2 | RNVC: 2

17 Jun 2021

5975-01-696-5953
Electrical Equipment Drawer

016965953
9394900: RNCC: 3 | RNVC: 2
9394900: RNCC: 5 | RNVC: 2

5 Aug 2021

5975-01-696-5002
Mounting Plate

016965002
OP-9400(3T): RNCC: 3 | RNVC: 2

30 Jul 2021

5975-01-344-7576
Blank Panel

013447576
10275-1150: RNCC: 3 | RNVC: 2

6 Sep 1991

5975-01-343-5088
Electrical Equipment Cabinet

013435088
30628-503: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-641-6734
Electrical-Electronic Equipment Chassis

016416734
QR491A: RNCC: 3 | RNVC: 2
QR491A: RNCC: 5 | RNVC: 2

29 Jan 2015

5975-01-633-4896
Electrical Equipment Rack

016334896
MR1921-05/29/05-11U: RNCC: 3 | RNVC: 2

24 Nov 2014

5975-01-342-9914
Electrical Wall Plate

013429914
708604-1: RNCC: 3 | RNVC: 2

2 Aug 1991

5975-01-343-5089
Electrical Equipment Cabinet

013435089
30647-503: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-693-4124
Cable Marker Sleeve

016934124
SS7074-1922: RNCC: 3 | RNVC: 2

10 Feb 2021

5975-01-690-7900
Electrical Equipment Mounting Base

016907900
540595: RNCC: 3 | RNVC: 2

1 Sep 2020

5975-01-691-9992
Electrical-Electronic Equipment Panel

016919992
4078987-0510: RNCC: 3 | RNVC: 2

12 Nov 2020

5975-01-692-2749
Electrical-Electronic Equipment Chassis

016922749
304-5067-132: RNCC: 3 | RNVC: 2

3 Dec 2020

5975-01-692-9828
Junction Box Cover

016929828
NM-BLANK-T1=: RNCC: 3 | RNVC: 2

21 Jan 2021

5975-01-694-0346
Electrical Tie Down Mounting Base

016940346
DK-SBK0S10: RNCC: 3 | RNVC: 2

15 Mar 2021

5975-01-693-5795
Electrical-Electronic Equipment Panel

016935795
1088133: RNCC: 3 | RNVC: 2

22 Feb 2021

5975-01-692-9687

21 Jan 2021

5975-01-693-5155
Electrical Equipment Mounting Base

016935155
RAM-E-202U: RNCC: 3 | RNVC: 2
MX4471A00: RNCC: 5 | RNVC: 2

18 Feb 2021

5975-01-303-6699
Electrical-Electronic Equipment Panel

013036699
31649: RNCC: 3 | RNVC: 9

4 Jul 1989

5975-01-340-1157
Electrical Conduit Elbow

013401157
3416-1-2: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-1378
Cable Marker Sleeve

013401378
506657-11: RNCC: 3 | RNVC: 2

10 Jun 1991

5975-01-340-2920
Maintenance Tray

013402920
955536-101: RNCC: 3 | RNVC: 2

11 Jun 1991

5975-01-630-1685
Electrical-Electronic Equipment Chassis

016301685
30222-1020-0101: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-689-2496
Electrical-Electronic Equipment Chassis

016892496
40010179-000: RNCC: 3 | RNVC: 2

11 Jun 2020

5975-01-689-3318
Electrical-Electronic Equipment Panel

016893318
20-104-30: RNCC: 3 | RNVC: 2

16 Jun 2020

5975-01-689-7337
Mounting Plate

016897337
011-02246-02: RNCC: 3 | RNVC: 1

8 Jul 2020

5975-01-687-3041
Junction Box

016873041
844E2423-11: RNCC: 3 | RNVC: 2

26 Mar 2020

5975-01-691-3167
Junction Box Assembly

016913167
02-Y01-16-209-01: RNCC: 3 | RNVC: 2

2 Oct 2020

5975-01-690-2843
Electronic Equipment Mounting Tray

016902843
ADJSHELFHD: RNCC: 3 | RNVC: 2

4 Aug 2020

5975-01-691-6100
Electrical Equipment Rack

016916100
GXT5 RMKIT18-32: RNCC: 3 | RNVC: 2

20 Oct 2020

5975-01-689-9019
Electrical Components Tie Down Strap

016899019
B7SAW0C: RNCC: 3 | RNVC: 2

16 Jul 2020

5975-01-301-3682
Flexible Metal Conduit

013013682
781342-36212: RNCC: 3 | RNVC: 2
E.F. 1/2GRAY SMALL CARTON: RNCC: 3 | RNVC: 2

27 May 1989

5975-00-861-6718
Conduit Outlet

008616718
LB61: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-685-2992
Electrical-Electronic Equipment Chassis

016852992
RFE23050340-501: RNCC: 3 | RNVC: 2
RFE23050340-501: RNCC: 3 | RNVC: 9

10 Dec 2019

5975-01-685-2532
Nonmetallic Raceway Assembly

016852532
WGBTMWFBL: RNCC: 3 | RNVC: 2

9 Dec 2019

5975-01-685-6695
Electrical-Electronic Equipment Chassis

016856695
K10055570-6: RNCC: 3 | RNVC: 2

7 Jan 2020

5975-01-686-5356
Mounting Plate

016865356
RQ688-3: RNCC: 3 | RNVC: 2

21 Feb 2020

5975-01-685-6651
Electrical-Electronic Equipment Chassis

016856651
K10055570-3: RNCC: 3 | RNVC: 2

7 Jan 2020

5975-01-686-5019
Junction Box

016865019
PC 125/35 LG: RNCC: 3 | RNVC: 2

19 Feb 2020

5975-01-687-3689
Junction Box

016873689
844E2033-101: RNCC: 3 | RNVC: 2

30 Mar 2020

5975-01-687-3140
Electrical-Electronic Equipment Chassis

016873140
72D245099-1005: RNCC: 3 | RNVC: 2

26 Mar 2020

5975-01-140-0764
Cable Marker Sleeve

011400764
TMS-SCE-3/8-2.0-S1-9: RNCC: 3 | RNVC: 1
215511T102: RNCC: 5 | RNVC: 2
RNF-100-3/8X1 1/4 WHITE: RNCC: 5 | RNVC: 9
215511T102: RNCC: 7 | RNVC: 2

7 Oct 1982

5975-01-140-0766
Cable Marker Sleeve

011400766
TMS-SCE-3/8-2.0-S1-9: RNCC: 3 | RNVC: 1
215511T104: RNCC: 5 | RNVC: 2
RNF-100-3/8X1 1/4 WHITE: RNCC: 5 | RNVC: 9
215511T104: RNCC: 7 | RNVC: 2

7 Oct 1982

5975-01-433-0743
Chassis Base

014330743
9475672-1: RNCC: 3 | RNVC: 2

20 Jun 1996

5975-01-626-2898
Electrical-Electronic Equipment Panel

016262898
734-65222-1: RNCC: 3 | RNVC: 2
734-65222: RNCC: D | RNVC: 9

5 Mar 2014

5975-01-626-2907
Electrical-Electronic Equipment Panel

016262907
734-65226-1: RNCC: 3 | RNVC: 2
734-65226: RNCC: D | RNVC: 9

5 Mar 2014

5975-01-626-2213
Electrical-Electronic Equipment Chassis

016262213
AT-CV1200: RNCC: 3 | RNVC: 2

4 Mar 2014

5975-01-608-8645
Electrical-Electronic Equipment Chassis

016088645
627-5725: RNCC: 3 | RNVC: 9

13 Jul 2012

5975-01-397-5650
Rigid Metal Conduit

013975650
1310-0101-9: RNCC: 3 | RNVC: 2
1310-0101-9: RNCC: 5 | RNVC: 9

13 Oct 1994

5975-00-245-1699
Conduit Outlet

002451699
LL37: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-265-7487
Conduit Outlet

002657487
T17MT: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-01-624-6946
Electrical-Electronic Equipment Chassis

016246946
11A05GJB58Y4HPBS-BC: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-625-4395
Electrical-Electronic Equipment Chassis

016254395
T1US2DS01: RNCC: 3 | RNVC: 2

4 Feb 2014

5975-01-624-9564
Electrical Equipment Mounting Base

016249564
CMP-MGNT-TRAY: RNCC: 3 | RNVC: 2
CMP-MGNT-TRAY: RNCC: 5 | RNVC: 2
CMP-MGNT-TRAY =: RNCC: 5 | RNVC: 2

21 Jan 2014

5975-01-625-7715
Electrical-Electronic Equipment Chassis

016257715
900A: RNCC: 3 | RNVC: 2
900A: RNCC: 5 | RNVC: 2
900A: RNCC: 5 | RNVC: 2

13 Feb 2014

5975-01-626-3369
Electrical-Electronic Equipment Panel

016263369
734-65218-1: RNCC: 3 | RNVC: 2
734-65218: RNCC: D | RNVC: 9

6 Mar 2014

5975-01-626-3775
Electrical-Electronic Equipment Panel

016263775
734-62708-1: RNCC: 3 | RNVC: 2
734-62708: RNCC: D | RNVC: 9

7 Mar 2014

5975-01-608-0812
Electrical Equipment Foot

016080812
100045: RNCC: 3 | RNVC: 2

20 Jun 2012

5975-01-396-5616
Electrical-Electronic Equipment Chassis

013965616
728011265-001: RNCC: 3 | RNVC: 2

21 Sep 1994

5975-00-284-8436
Stuffing Tube

002848436
SCD16576GR0UPV: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0598
Stuffing Tube

001780598
9S5010LALT17TYPE22BSYMB0L1905: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-423-7858
Electrical-Electronic Equipment Chassis

014237858
ODS-1097: RNCC: 3 | RNVC: 9

10 Jan 1996

5975-01-624-6306
Electrical-Electronic Equipment Panel

016246306
68A810412-1017: RNCC: 3 | RNVC: 2

9 Jan 2014

5975-01-625-0904
Electrical Equipment Cabinet

016250904
TTK-4SM-W-S: RNCC: 3 | RNVC: 2

24 Jan 2014

5975-01-600-4980
Junction Box

016004980
032430-1: RNCC: 3 | RNVC: 2

5 Dec 2011

5975-01-623-4003
Electrical-Electronic Equipment Chassis

016234003
ASR-9006-AC: RNCC: 3 | RNVC: 2

13 Nov 2013

5975-01-317-2263
Cable Marker Sleeve

013172263
SS7074-2781: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-554-7531
Electrical Chassis

015547531
262145G1: RNCC: 3 | RNVC: 2

17 Aug 2007

5975-01-555-3035
Electronic Junction Rack

015553035
TJT701020: RNCC: 3 | RNVC: 2

31 Aug 2007

5975-01-554-3738
Electrical Tubing

015543738
P1896718-5: RNCC: 3 | RNVC: 2

7 Aug 2007

5975-01-554-7509
Electrical Chassis

015547509
266950G1: RNCC: 3 | RNVC: 2

17 Aug 2007

5975-01-311-9019
Strain Electrical Conductor Clamp

013119019
151-001960-001: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-388-2603
Electrical Components Tie Down Strap

013882603
PRT2EHC0: RNCC: 3 | RNVC: 2
PRT2EHC0: RNCC: 5 | RNVC: 2
PRT2EHC0: RNCC: 5 | RNVC: 2
PRT2ECHO: RNCC: 5 | RNVC: 2
PRT2EHC0: RNCC: 5 | RNVC: 2
PRT2ECHO: RNCC: 5 | RNVC: 9

25 Mar 1994

5975-01-375-2804
Electrical-Electronic Equipment Panel

013752804
68734-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-2779
Electrical-Electronic Equipment Panel

013752779
68709-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-552-8408
Conduit Outlet

015528408
8301512: RNCC: 3 | RNVC: 2

26 Jun 2007

5975-01-553-1389
Electrical-Electronic Equipment Chassis

015531389
31-300-3440: RNCC: 3 | RNVC: 2

9 Jul 2007

5975-01-619-4996
Condulet

016194996
AR60: RNCC: 3 | RNVC: 2

4 Jun 2013

5975-01-467-7049
Blank Panel

014677049
J1508A: RNCC: 3 | RNVC: 2

10 Sep 1999

5975-01-551-3791
Electrical-Electronic Equipment Chassis

015513791
AA3100767-01: RNCC: 3 | RNVC: 2
POWEREDGE1855ENCLOSURE: RNCC: 3 | RNVC: 2

15 May 2007

5975-01-551-6763
Electrical-Electronic Equipment Chassis

015516763
800-RHW-04-01-4: RNCC: 3 | RNVC: 2

23 May 2007

5975-01-552-3767
Electrical-Electronic Equipment Panel

015523767
10446-1600-03: RNCC: 3 | RNVC: 2

12 Jun 2007

5975-01-618-6535
Electrical Components Tie Down Strap

016186535
KH5170: RNCC: 3 | RNVC: 9
KH5170: RNCC: C | RNVC: 1

30 Apr 2013

5975-01-618-8881
Electrical Equipment Rack

016188881
CN1: RNCC: 3 | RNVC: 2

9 May 2013

5975-01-618-5484
Electronic Junction Rack

016185484
CTJ-3A-09-4021: RNCC: 3 | RNVC: 2

27 Apr 2013

5975-01-618-9621
Electrical Equipment Cabinet

016189621
7420700-43: RNCC: 3 | RNVC: 2

13 May 2013

5975-01-618-5325
Electrical Tie Down Mounting Base

016185325
FTH-7A-RT: RNCC: 3 | RNVC: 9

26 Apr 2013

5975-01-619-0099
Electrical Equipment Mounting Base

016190099
Z6/8: RNCC: 3 | RNVC: 2

14 May 2013

5975-01-618-9618
Electrical Equipment Cabinet

016189618
7420700-41: RNCC: 3 | RNVC: 2

13 May 2013

5975-01-618-9109
Electrical-Electronic Equipment Chassis

016189109
8521763-902: RNCC: 3 | RNVC: 2

9 May 2013

5975-01-455-6890
Rigid Metal Conduit

014556890
8324-1: RNCC: 3 | RNVC: 2

12 May 1998

Load More Results