What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 102 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 102 of 176

5975-01-328-8968
Electrical Equipment Mounting Base

013288968
654377-301: RNCC: 3 | RNVC: 2
654377-301: RNCC: 3 | RNVC: 9

9 Nov 1990

5975-01-289-2732
Electrical Equipment Cabinet

012892732
G25319: RNCC: 3 | RNVC: 9
F-22142 PIECE 79: RNCC: 5 | RNVC: 9

20 Nov 1988

5975-01-377-2511
Cable Marker Sleeve

013772511
4100565-8: RNCC: 3 | RNVC: 2

10 Jul 1993

5975-01-281-8820
Flexible Nonmetallic Conduit

012818820
1/4 IN. ASPHALT COAT: RNCC: 3 | RNVC: 2

3 Jul 1988

5975-01-281-0514
Electrical Conduit Adapter

012810514
G62793-20: RNCC: 3 | RNVC: 2
S1776-20: RNCC: 5 | RNVC: 2
K15K0008-7: RNCC: 5 | RNVC: 9

16 Jun 1988

5975-01-279-7594
Electrical Conduit Adapter

012797594
K15K0008-8: RNCC: 3 | RNVC: 2
G62793-22: RNCC: 5 | RNVC: 2
S1776-22: RNCC: 5 | RNVC: 2
K15K0008-8: RNCC: 5 | RNVC: 9
K15K0008: RNCC: 7 | RNVC: 1
K15K0008: RNCC: 7 | RNVC: 9

25 May 1988

5975-01-365-5440
Electrical Conduit Adapter

013655440
7000-715-10-62: RNCC: 3 | RNVC: 2
RP2330-10-05SM: RNCC: 5 | RNVC: 2
RP2330-10-05: RNCC: 5 | RNVC: 2
RP2330-10-05: RNCC: 5 | RNVC: 9

8 Oct 1992

5975-01-262-8522
Electrical Nonmetallic Conduit Assembly

012628522
T-1394: RNCC: 3 | RNVC: 2

4 Sep 1987

5975-01-262-8523
Electrical Nonmetallic Conduit Assembly

012628523
T-1396: RNCC: 3 | RNVC: 2

4 Sep 1987

5975-01-260-0060
Electrical Box Connector

012600060
0080-20-101-15: RNCC: 3 | RNVC: 2

24 Jul 1987

5975-01-255-3913
Flexible Nonmetallic Conduit

012553913
CVC2597-14-288: RNCC: 3 | RNVC: 2

20 May 1987

5975-01-356-9776
Blank Panel

013569776
149D3468P0002: RNCC: 3 | RNVC: 9
149D3468P2: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-251-9186
Stuffing Tube

012519186
ASI 202 ITEM 8 6IN: RNCC: 3 | RNVC: 2

26 Mar 1987

5975-01-246-7136
Cable Terminal Chamber

012467136
7729343-30: RNCC: 3 | RNVC: 9
7729343-30: RNCC: 5 | RNVC: 2
7729343-10: RNCC: 5 | RNVC: 9
7729343-10: RNCC: 5 | RNVC: 9
7729343-30: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-350-5658
Electrical Conduit Adapter

013505658
G63163: RNCC: 3 | RNVC: 2
10013: RNCC: 3 | RNVC: 2
187818-FB6200: RNCC: 3 | RNVC: 2
10252146-1: RNCC: 7 | RNVC: 2

18 Dec 1991

5975-01-241-2148
Electrical Conduit Adapter

012412148
RP2100-EM08-T: RNCC: 3 | RNVC: 2
RP2100-G08-T: RNCC: 3 | RNVC: 2
302-5563030 ITEM 15: RNCC: 5 | RNVC: 1
RP2100-F08-T: RNCC: 5 | RNVC: 2
RP2100-EM08-T: RNCC: 5 | RNVC: 9
RP2100-F08-T: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-231-3546
Electrical Tie Down Mounting Base

012313546
FCPI1-C20: RNCC: 3 | RNVC: 2
717625-1: RNCC: 5 | RNVC: 2

25 Apr 1986

5975-01-222-0543
Strain Relief Clamp

012220543
223-100012: RNCC: 1 | RNVC: 2
3504-1: RNCC: 3 | RNVC: 9
223-100012-001: RNCC: 5 | RNVC: 9
3504-1: RNCC: 5 | RNVC: 9

6 Dec 1985

5975-01-333-3085
Electrical-Electronic Equipment Panel

013333085
3262-7721: RNCC: 3 | RNVC: 2
3262-7721: RNCC: 5 | RNVC: 9

30 Jan 1991

5975-01-210-8076
Electrical Nonmetallic Conduit Assembly

012108076
R58HB09C33W020: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Jun 1985

5975-01-202-1179
Electrical Equipment Mounting Base

012021179
E5-15-4675: RNCC: 3 | RNVC: 2
E5-15-4675: RNCC: 5 | RNVC: 9

27 Feb 1985

5975-01-317-9668
Electrical Equipment Cabinet

013179668
3591-6469: RNCC: 3 | RNVC: 2
FA10226: RNCC: 5 | RNVC: 2
3591-6469: RNCC: 5 | RNVC: 9
FA10226: RNCC: 5 | RNVC: 9

9 Apr 1990

NSN 5975-01-196-3502 011963502 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-196-3502
Electrical Components Tie Down Strap

011963502
TY25MZYT103: RNCC: 3 | RNVC: 2

11 Dec 1984

5975-01-191-5213
Stuffing Tube

011915213
249-BLACK: RNCC: 3 | RNVC: 9

10 Oct 1984

5975-01-180-6836
Electrical-Electronic Equipment Panel

011806836
13079478: RNCC: 3 | RNVC: 2
13079478: RNCC: 5 | RNVC: 9

31 May 1984

5975-01-302-8290
Flexible Metal Conduit Assembly

013028290
750-011NF12-57: RNCC: 3 | RNVC: 2
200205-DI0570: RNCC: 3 | RNVC: 2
10250675-50: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-165-8855
Flexible Nonmetallic Conduit

011658855
94422004: RNCC: 3 | RNVC: 2
7807: RNCC: 5 | RNVC: 9

4 Nov 1983

5975-01-276-6790
Blank Panel

012766790
6510714-1: RNCC: 3 | RNVC: 2

12 Apr 1988

5975-01-141-6887
Electrical Tote Box

011416887
4425: RNCC: 3 | RNVC: 9
4425: RNCC: 5 | RNVC: 9
4425: RNCC: 5 | RNVC: 9
98-0798-0323-9: RNCC: 5 | RNVC: 9
98-0798-0323-9: RNCC: 5 | RNVC: 9

3 Nov 1982

5975-01-141-6883
Electrical Box Divider

011416883
4307: RNCC: 3 | RNVC: 9
98-0798-0313-0: RNCC: 5 | RNVC: 9
98-0798-0313-0: RNCC: 5 | RNVC: 9
4307: RNCC: 5 | RNVC: 9
4307: RNCC: 5 | RNVC: 9

3 Nov 1982

5975-01-141-6882
Electrical Box Divider

011416882
4306: RNCC: 3 | RNVC: 2
4306: RNCC: 3 | RNVC: 9
4306: RNCC: 5 | RNVC: 9
98-0798-0312-2: RNCC: 5 | RNVC: 9

3 Nov 1982

5975-01-141-2828
Electrical Equipment Cabinet

011412828
308383-1: RNCC: 3 | RNVC: 2

26 Oct 1982

5975-01-273-5966
Electrical Conduit Coupling

012735966
3511AC: RNCC: 3 | RNVC: 2
34711: RNCC: 5 | RNVC: 2

27 Feb 1988

5975-01-132-1664
Cable Marker Sleeve

011321664
GS830FB06-01: RNCC: 3 | RNVC: 2

24 May 1982

5975-01-127-2548
Flexible Nonmetallic Conduit

011272548
74A885630-1015: RNCC: 3 | RNVC: 2
74A88563C-1015: RNCC: 5 | RNVC: 2
74A885630-1015: RNCC: 5 | RNVC: 2

27 Feb 1982

5975-01-124-2228
Electrical Components Tie Down Strap

011242228
10S300-1-52: RNCC: 3 | RNVC: 9
10S300-1-52: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-124-2214
Electrical Components Tie Down Strap

011242214
10S300-2-1: RNCC: 3 | RNVC: 9
10S300-2-1: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-124-2215
Electrical Components Tie Down Strap

011242215
10S300-2-154: RNCC: 3 | RNVC: 9
10S300-2-154: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-122-9272
Electrical Components Tie Down Strap

011229272
10S300-2-55: RNCC: 3 | RNVC: 9
10S300-2-55: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-122-9261
Electrical Components Tie Down Strap

011229261
10S300-2-14: RNCC: 3 | RNVC: 9
10S300-2-14: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-122-9262
Electrical Components Tie Down Strap

011229262
10S300-2-15: RNCC: 3 | RNVC: 9
10S300-2-15: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-245-7723
Electrical Conduit Adapter

012457723
150315: RNCC: 3 | RNVC: 2

4 Dec 1986

5975-01-098-5238
Junction Box

010985238
74-35048-001: RNCC: 3 | RNVC: 2
J-3636A: RNCC: 5 | RNVC: 1

4 Aug 1980

5975-01-094-5237
Electrical Tie Down Mounting Base

010945237
FCBI1-S10-C20: RNCC: 3 | RNVC: 2
7558653-01: RNCC: 5 | RNVC: 9

10 May 1980

5975-01-087-7587
Electrical Equipment Drawer

010877587
908D726G03: RNCC: 3 | RNVC: 1
908D726G03TR: RNCC: 5 | RNVC: 2
908D726G03: RNCC: 5 | RNVC: 9

25 Dec 1979

5975-01-087-7586
Electrical Equipment Drawer

010877586
908D725G03: RNCC: 3 | RNVC: 1
908D725G03TR: RNCC: 5 | RNVC: 2
908D725G03: RNCC: 5 | RNVC: 9

25 Dec 1979

5975-01-206-6316
Electrical Equipment Mounting Base

012066316
759R369G01: RNCC: 3 | RNVC: 2
MT-6333/APQ-164: RNCC: 5 | RNVC: 9
400-11678-10: RNCC: 5 | RNVC: 9
694R949G01: RNCC: 5 | RNVC: 9
754R276G01: RNCC: 5 | RNVC: 9
400-11678: RNCC: D | RNVC: 9

20 Apr 1985

5975-01-188-5200
Electrical Equipment Cabinet

011885200
44D0552: RNCC: 3 | RNVC: 2
44D0552: RNCC: 3 | RNVC: 9

5 Sep 1984

5975-01-185-8879
Support Bracket

011858879
406-075-126-101: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-016-2496
Stuffing Tube

010162496
275-001-L02-2206: RNCC: 3 | RNVC: 9
M24235/9-127: RNCC: 4 | RNVC: 1
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2147: RNCC: 5 | RNVC: 9

7 Feb 1976

5975-01-149-6626
Rigid Metal Conduit Assembly

011496626
65610-02050-041: RNCC: 3 | RNVC: 2

23 Mar 1983

5975-01-136-8861
Cable Terminal Chamber

011368861
11462120: RNCC: 3 | RNVC: 2
11462120: RNCC: 5 | RNVC: 1
11462120: RNCC: 5 | RNVC: 9

17 Aug 1982

5975-01-134-2264
Cover Panel

011342264
145E3118-5: RNCC: 3 | RNVC: 2

2 Jul 1982

5975-00-935-2286
Conduit Outlet Cover

009352286
S322GSA: RNCC: 3 | RNVC: 2
S322SA: RNCC: 5 | RNVC: 9

28 Aug 1968

5975-00-909-2053
Spacer Tape

009092053
7100017387: RNCC: 3 | RNVC: 2
P-3: RNCC: 3 | RNVC: 2
P3SPACER: RNCC: 5 | RNVC: 9
5975009092053: RNCC: 5 | RNVC: 9
P3SPACER: RNCC: 5 | RNVC: 9
P-3: RNCC: 5 | RNVC: 9
P-3: RNCC: 5 | RNVC: 9
5975009092053: RNCC: 6 | RNVC: 9

1 Jan 1960

5975-00-769-3925
Insulator Pin

007693925
J203A: RNCC: 3 | RNVC: 2
J203A: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-873-9048
Electrical Box Connector

008739048
GC5006: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-649-8633
Electrical Box Connector

006498633
8763341-1: RNCC: 1 | RNVC: 2
4317-A: RNCC: 3 | RNVC: 2
DB-6-A: RNCC: 3 | RNVC: 2
7031633P1: RNCC: 5 | RNVC: 2
8763341-1: RNCC: 5 | RNVC: 2
8763341-1: RNCC: 5 | RNVC: 2
5975006498633: RNCC: 5 | RNVC: 9
5975006498633: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-295-9864
Interior Cable Rack

002959864
0020030630: RNCC: 3 | RNVC: 2
P420634: RNCC: 5 | RNVC: 2
2003-6: RNCC: 5 | RNVC: 9
CR116: RNCC: 5 | RNVC: 9
P420634: RNCC: 5 | RNVC: 9
P420634: RNCC: 5 | RNVC: 9
P420634: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-252-6416
Wiring Harness Sealing Fitting

002526416
LS10277-1: RNCC: 3 | RNVC: 2

18 Jun 1973

5975-01-686-6916
Electrical Equipment Mounting Base

016866916
4101AS0150-1: RNCC: 3 | RNVC: 2
4101AS0150: RNCC: D | RNVC: 9

28 Feb 2020

5975-01-686-6096
Mounting Plate

016866096
4353866: RNCC: 3 | RNVC: 2

25 Feb 2020

5975-01-677-6855
Fan Assembly

016776855
1775-25-2980-01: RNCC: 3 | RNVC: 2

28 Dec 2018

5975-01-665-3882
Electrical Conduit Tee

016653882
506-MCM7513K81: RNCC: 3 | RNVC: 2

27 Jul 2017

5975-01-678-5599
Tray Module Fan

016785599
8479877-2: RNCC: 1 | RNVC: 2
UFT-1440-C06: RNCC: 3 | RNVC: 2
8479877-2: RNCC: 3 | RNVC: 2

13 Feb 2019

5975-01-595-5665
Electrical-Electronic Equipment Panel

015955665
8436899-1: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-602-7830
Electrical-Electronic Equipment Panel

016027830
4V10474-101A: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-555-9151
Electrical Equipment Rack

015559151
M-27002-1: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-596-5446
Electrical Equipment Rack

015965446
03002A1118-1: RNCC: 3 | RNVC: 2
02-15732: RNCC: 5 | RNVC: 2

19 May 2011

5975-01-556-9357
Junction Box Assembly

015569357
482-7067865-A7: RNCC: 3 | RNVC: 2
H689-1703-A7: RNCC: 5 | RNVC: 1

9 Oct 2007

5975-01-568-1263
Rigid Metal Conduit

015681263
136C477G01: RNCC: 3 | RNVC: 2
136C477G01: RNCC: 3 | RNVC: 9
136C477G01: RNCC: 5 | RNVC: 9

21 Oct 2008

5975-01-605-8727
Electrical Equipment Mounting Base

016058727
901-060-335-104: RNCC: 3 | RNVC: 2

27 Apr 2012

5975-01-566-7385
Interconnecting Box

015667385
74R730025-1003: RNCC: 3 | RNVC: 2

9 Sep 2008

5975-01-618-6237
Junction Box Assembly

016186237
123AV60653-1: RNCC: 3 | RNVC: 9
123AV60653-1: RNCC: 5 | RNVC: 1
123AV60653-1: RNCC: C | RNVC: 1

30 Apr 2013

5975-01-579-7451
Electrical Equipment Leg

015797451
SP-000064: RNCC: 3 | RNVC: 2
SP-000064: RNCC: 5 | RNVC: 2
038251-01: RNCC: 5 | RNVC: 9
07011B3500: RNCC: 7 | RNVC: 2

23 Nov 2009

5975-01-610-0004
Flexible Metal Conduit Assembly

016100004
3260AS1328-12: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-496-9016
Cable Collar

014969016
2916888-4: RNCC: 3 | RNVC: 2
2916888-4: RNCC: 5 | RNVC: 2
2916888-4: RNCC: 5 | RNVC: 9

1 May 2002

5975-01-504-5730
Electrical Standardized Components Case Section

015045730
5186605-1: RNCC: 3 | RNVC: 2
5186605-1: RNCC: 5 | RNVC: 9

3 Feb 2003

5975-01-504-2549
Electrical Fitting Mounting Base

015042549
4098-9792: RNCC: 3 | RNVC: 2
401-7528488-ITEM-7: RNCC: 5 | RNVC: 1
401-7528488: RNCC: D | RNVC: 9

23 Jan 2003

5975-01-530-2748
Transiion

015302748
12273148-210: RNCC: 3 | RNVC: 2
12273148-210: RNCC: 5 | RNVC: 2
D,12273148-210: RNCC: 5 | RNVC: 9

19 May 2005

5975-01-503-9451
Electrical Components Tie Down Strap

015039451
T50L9M4: RNCC: 3 | RNVC: 2

14 Jan 2003

5975-01-532-5412
Rigid Metal Conduit

015325412
11477605: RNCC: 3 | RNVC: 2

11 Aug 2005

5975-01-500-1930
Electrical Grounding Plate

015001930
5043994-4: RNCC: 3 | RNVC: 9
5043994: RNCC: D | RNVC: 9

16 Aug 2002

5975-01-368-6742
Cable Hanger

013686742
STRP-016: RNCC: 3 | RNVC: 2

6 Dec 1992

5975-01-485-3616
Electrical Equipment Mounting Base

014853616
889498-1: RNCC: 3 | RNVC: 2
RAM-101U-M: RNCC: 5 | RNVC: 1
889498-1: RNCC: 5 | RNVC: 2
889498-1: RNCC: 5 | RNVC: 2
RAM-D-111-MIU: RNCC: 5 | RNVC: 9
RAM 101U-M: RNCC: 5 | RNVC: 9
889498: RNCC: D | RNVC: 9

23 May 2001

5975-01-490-9843
Electrical Conduit Adapter

014909843
4D09274-001: RNCC: 3 | RNVC: 2
6510E64: RNCC: D | RNVC: 9

9 Oct 2001

5975-01-342-9566
Electrical-Electronic Equipment Chassis

013429566
46-0851-13: RNCC: 3 | RNVC: 2

2 Aug 1991

5975-01-464-4282
Special Purpose Ele

014644282
737505-1: RNCC: 3 | RNVC: 2
737505-1: RNCC: 3 | RNVC: 9

29 Apr 1999

5975-01-473-2767
Electrical Cable Protector

014732767
195A050-1: RNCC: 3 | RNVC: 2
195A050: RNCC: D | RNVC: 9

3 Apr 2000

5975-01-483-4483
Junction Box Assembly

014834483
482-7067865-A1: RNCC: 3 | RNVC: 2
H6891703-A1: RNCC: 5 | RNVC: 2
7067865: RNCC: D | RNVC: 9

29 Mar 2001

5975-01-365-9585
Electrical-Electronic Equipment Chassis

013659585
1348AS130: RNCC: 3 | RNVC: 2
1348AS130: RNCC: 5 | RNVC: 2
1348AS130: RNCC: 5 | RNVC: 2
1348AS130: RNCC: 5 | RNVC: 2

19 Oct 1992

5975-01-324-0352
Strain Electrical Conductor Clamp

013240352
141C960G01: RNCC: 3 | RNVC: 2
141C960G01: RNCC: 3 | RNVC: 9
141C960G01: RNCC: 5 | RNVC: 2

8 Aug 1990

5975-01-400-3408
Junction Box

014003408
20-75-WM2-115AITEM1: RNCC: 3 | RNVC: 2

14 Dec 1994

5975-01-343-1235
Junction Box

013431235
KS27294: RNCC: 3 | RNVC: 2
KS27294: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-363-9998
Electrical Equipment Mounting Base

013639998
4745: RNCC: 3 | RNVC: 2

11 Sep 1992

5975-01-371-9176
Rigid Metal Conduit Assembly

013719176
S81915B13CGM15: RNCC: 3 | RNVC: 2
5224209-34: RNCC: 5 | RNVC: 2
71434-34: RNCC: 5 | RNVC: 9
5224209-34: RNCC: 7 | RNVC: 2

25 Feb 1993

5975-01-462-7318
Stuffing Tube

014627318
1990.6 SIZE F TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269-146: RNCC: 5 | RNVC: 1
9000S620274269: RNCC: D | RNVC: 9

16 Feb 1999

5975-01-472-0157
Strain Electrical Conductor Clamp

014720157
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-189-5880
Electrical Conduit Coupling

011895880
LD482-0065-0005: RNCC: 3 | RNVC: 2

17 Sep 1984

5975-01-304-7128
Electrical-Electronic Equipment Panel

013047128
NMPP02: RNCC: 3 | RNVC: 2

26 Jul 1989

5975-01-227-4041
Ground Rod

012274041
342C280H06: RNCC: 3 | RNVC: 2
342C280H06: RNCC: 3 | RNVC: 9
342C280H06: RNCC: 5 | RNVC: 2
34C280H06: RNCC: 5 | RNVC: 9

3 Mar 1986

5975-01-303-8235
Electrical-Electronic Equipment Panel

013038235
TI 81001-1: RNCC: 3 | RNVC: 2
TI 715823-4: RNCC: 5 | RNVC: 2
715823-4: RNCC: 5 | RNVC: 9

7 Jul 1989

5975-01-278-9821
Junction Box

012789821
M24142/10-001: RNCC: 2 | RNVC: 2
MIL-E-24142/10: RNCC: 4 | RNVC: 1

12 May 1988

5975-01-299-7050
Flexible Nonmetallic Conduit

012997050
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1110: RNCC: 3 | RNVC: 2
M81914/4-1110: RNCC: 5 | RNVC: 9

4 May 1989

5975-01-220-7134
Electronic Junction Rack

012207134
62501-10: RNCC: 3 | RNVC: 2

17 Nov 1985

5975-01-260-7182
Rigid Metal Conduit Assembly

012607182
4G52430-101A: RNCC: 3 | RNVC: 9

4 Aug 1987

5975-01-181-9645
Cable Clamp Assy Rh

011819645
150389-1: RNCC: 3 | RNVC: 2

19 Jun 1984

5975-01-133-9855
Electrical-Electronic Equipment Chassis

011339855
930648-805: RNCC: 3 | RNVC: 2

24 Jun 1982

5975-01-173-2207
Electrical Conduit Elbow

011732207
G8619-207B: RNCC: 3 | RNVC: 2
G5603-207B: RNCC: 5 | RNVC: 9

3 Mar 1984

5975-01-139-0121
Electrical-Electronic Equipment Chassis

011390121
800RHW01-01-3: RNCC: 3 | RNVC: 2

22 Sep 1982

5975-00-935-9617
Electrical Equipment Mounting Base

009359617
MS91404S2: RNCC: 2 | RNVC: 2
MIL-C-172: RNCC: 4 | RNVC: 1
BL-1102: RNCC: 5 | RNVC: 1
1231-2: RNCC: 5 | RNVC: 1
TOLA-S2-A5: RNCC: 5 | RNVC: 1
1206-2: RNCC: 5 | RNVC: 9
325-8: RNCC: 5 | RNVC: 9

20 Aug 1969

5975-01-346-2549
Unique Supply Support Request

013462549
126-2635-010: RNCC: 3 | RNVC: 9
1185: RNCC: C | RNVC: 1

1 Oct 1991

5975-01-697-4350
Junction Box

016974350
3121: RNCC: 3 | RNVC: 2
700-0-74-147-101: RNCC: 7 | RNVC: 2

20 Sep 2021

5975-01-683-0575
Electrical Cable Protector

016830575
13015549: RNCC: 3 | RNVC: 2

6 Sep 2019

5975-01-615-8415
Flexible Metal Conduit Assembly

016158415
23A02863-64: RNCC: 3 | RNVC: 2

24 Jan 2013

5975-01-611-2348
Flexible Metal Conduit

016112348
01D3172H06: RNCC: 1 | RNVC: 2
M24758-F: RNCC: 3 | RNVC: 2
MIL-PRF-24758-F: RNCC: 3 | RNVC: 9

10 Sep 2012

5975-01-619-8678
Electrical Components Tie Down Strap

016198678
RT-675-UVPP: RNCC: 3 | RNVC: 2
70215K63: RNCC: 5 | RNVC: 2

20 Jun 2013

5975-01-657-4275
Electrical Conduit Adapter

016574275
M24758-13B10: RNCC: 3 | RNVC: 2

12 Aug 2016

5975-01-644-2060
Electrical Wall Plate

016442060
13047352-1: RNCC: 1 | RNVC: 2
SS8: RNCC: 3 | RNVC: 9

24 Apr 2015

5975-01-664-7988
Electrical Components Tie Down Strap

016647988
10328: RNCC: 3 | RNVC: 2

6 Jul 2017

5975-01-601-1389
Metallic Raceway

016011389
2368141: RNCC: 3 | RNVC: 2

9 Jan 2012

5975-01-604-7905
Electrical Equipment Shelf

016047905
03002A1109-1: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-620-9534
Stuffing Tube

016209534
AX0685-2816-SP: RNCC: 3 | RNVC: 2
AX#685-TAB: RNCC: D | RNVC: 9

19 Aug 2013

5975-01-671-1667
Electrical-Electronic Equipment Chassis

016711667
8628998-01: RNCC: 3 | RNVC: 2
1505010-01: RNCC: 5 | RNVC: 2
8628998: RNCC: D | RNVC: 9

16 Mar 2018

5975-01-631-2035
Electrical Cable Protector

016312035
13015836: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-543-7982
Electrical Components Tie Down Strap

015437982
2179039: RNCC: 3 | RNVC: 2
217-9039: RNCC: 5 | RNVC: 2
CV178375: RNCC: 5 | RNVC: 2
217-9039: RNCC: 5 | RNVC: 2

21 Sep 2006

5975-01-515-0526
Electrical Conduit Elbow

015150526
LF90-50: RNCC: 3 | RNVC: 2
7457265 FIND NO. 6: RNCC: 5 | RNVC: 2

14 Nov 2003

5975-01-528-0055
Electrical Components Tie Down Strap

015280055
PLT3I-M: RNCC: 3 | RNVC: 2
PNUPLT3I-M: RNCC: 5 | RNVC: 9

28 Feb 2005

5975-01-502-1524
Electrical Conduit Adapter

015021524
712-088A24B: RNCC: 3 | RNVC: 2
712-088: RNCC: D | RNVC: 9

28 Oct 2002

5975-01-542-9012
Junction Box

015429012
0212349 FIND 3: RNCC: 1 | RNVC: 2
95F939: RNCC: 3 | RNVC: 2
AN-1304: RNCC: 5 | RNVC: 1
736-1307: RNCC: 5 | RNVC: 9

23 Aug 2006

5975-01-583-8123
Flexible Metal Conduit Assembly

015838123
7450912-1: RNCC: 3 | RNVC: 2
CA0012902S: RNCC: 5 | RNVC: 2
749-880: RNCC: 5 | RNVC: 2

7 Apr 2010

5975-01-531-3214
Electrical Equipment Mounting Base

015313214
822-1290-003: RNCC: 3 | RNVC: 2

1 Jul 2005

5975-01-476-1753
Electrical Equipment Rack

014761753
E3662B: RNCC: 3 | RNVC: 2
E3662B: RNCC: 3 | RNVC: 9
HP E3662B: RNCC: 5 | RNVC: 9
E3662B: RNCC: 5 | RNVC: 9

28 Jun 2000

5975-01-398-2743
Electrical Box Connector

013982743
453: RNCC: 3 | RNVC: 2
453: RNCC: 3 | RNVC: 9
453: RNCC: 5 | RNVC: 9

28 Oct 1994

5975-01-320-7363
Electrical Cable Protector

013207363
3824910-9: RNCC: 3 | RNVC: 2
3824910-6: RNCC: 5 | RNVC: 9
10164158: RNCC: 6 | RNVC: 9
3824910: RNCC: D | RNVC: 9

2 Jun 1990

5975-01-302-8283
Flexible Metal Conduit Assembly

013028283
750-011NF16-102: RNCC: 3 | RNVC: 2
200206-DI1020: RNCC: 5 | RNVC: 2
10250675-60: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-160-8458
Flexible Nonmetallic Conduit

011608458
8919355: RNCC: 3 | RNVC: 2
8919355: RNCC: 5 | RNVC: 9

27 Aug 1983

5975-01-063-4022
Electrical Equipment Mounting Base

010634022
4038850-0501: RNCC: 3 | RNVC: 2
MT-4811/APX-100V: RNCC: 5 | RNVC: 1
4038850-0501: RNCC: 5 | RNVC: 2
706A35-402-124: RNCC: 5 | RNVC: 2
4038850-0501: RNCC: 5 | RNVC: 2
5975PL1612107: RNCC: 6 | RNVC: 9

5 Aug 1978

5975-00-284-9343
Stuffing Tube Packing Nut

002849343
9S5235LREV19PC2: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-01-668-6945
Ground Rod

016686945
T-5975-00: RNCC: 3 | RNVC: 2
5975-00: RNCC: 5 | RNVC: 9
11A7000095: RNCC: 7 | RNVC: 2

4 Dec 2017

5975-01-686-6078
Electrical-Electronic Equipment Chassis

016866078
4353867: RNCC: 3 | RNVC: 2

25 Feb 2020

5975-01-686-5326
Electrical Equipment Shelf

016865326
4354088: RNCC: 3 | RNVC: 2

21 Feb 2020

5975-01-687-5520
Junction Box Cover

016875520
6105018013-2: RNCC: 3 | RNVC: 2
6105018013: RNCC: D | RNVC: 9

7 Apr 2020

5975-01-686-5321
Electrical Equipment Shelf

016865321
4334957: RNCC: 3 | RNVC: 2

21 Feb 2020

5975-01-628-4380
Electrical Nonmetallic Conduit Assembly

016284380
749-844-78: RNCC: 3 | RNVC: 2
3260AS1328-78: RNCC: 5 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

27 May 2014

5975-01-610-6697
Electrical Nonmetallic Conduit Assembly

016106697
3260AS1328-67: RNCC: 1 | RNVC: 2
749-844-67: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-600-7943
Electrical Grounding Plate

016007943
04-2805389-2: RNCC: 3 | RNVC: 2

19 Dec 2011

5975-01-610-9152
Electrical Nonmetallic Conduit Assembly

016109152
3260AS1328-40: RNCC: 1 | RNVC: 2
749-844-40: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

30 Aug 2012

5975-01-603-0239
Electrical Components Tie Down Strap

016030239
R478167-04: RNCC: 3 | RNVC: 2

16 Feb 2012

5975-01-609-9580
Flexible Metal Conduit Assembly

016099580
3260AS1328-9: RNCC: 3 | RNVC: 2
749-844-9: RNCC: 5 | RNVC: 2

6 Aug 2012

5975-01-609-9816
Flexible Metal Conduit Assembly

016099816
3260AS1328-13: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-610-6678
Electrical Nonmetallic Conduit Assembly

016106678
3260AS1328-51: RNCC: 1 | RNVC: 2
749-844-51: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6717
Electrical Nonmetallic Conduit Assembly

016106717
3260AS1328-53: RNCC: 1 | RNVC: 2
749-844-53: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-613-5241
Cable Spacer

016135241
RMH-53735-0: RNCC: 3 | RNVC: 2

8 Nov 2012

5975-01-622-6467
Electrical Equipment Cabinet

016226467
11027B0003: RNCC: 3 | RNVC: 2

17 Oct 2013

5975-01-534-7425
Electrical Tie Down Mounting Base

015347425
752-7068433-A83: RNCC: 3 | RNVC: 2
H832-0399-A83: RNCC: 5 | RNVC: 2
H832-0399: RNCC: D | RNVC: 9
7068433: RNCC: D | RNVC: 9

1 Nov 2005

5975-01-565-7430
Electrical Equipment Leg

015657430
802011289203-1: RNCC: 3 | RNVC: 2

5 Aug 2008

5975-01-591-5495
Support Assy

015915495
199541-T02: RNCC: 3 | RNVC: 2

31 Jan 2011

5975-01-532-6716
Electrical Conduit Adapter

015326716
712GJ229NF2310: RNCC: 3 | RNVC: 2

16 Aug 2005

5975-01-591-4933
Support Assy

015914933
199541-T01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-534-9905
Electrical Conduit Adapter

015349905
TX-40-AB00-2410-H: RNCC: 3 | RNVC: 2

9 Nov 2005

5975-01-586-4529
Electrical-Electronic Equipment Chassis

015864529
DX75C/300B: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-551-4362
Electrical Nonmetallic Conduit Assembly

015514362
23A03193: RNCC: 3 | RNVC: 2

17 May 2007

5975-01-552-4559
Electrical Conduit Adapter

015524559
21A30309: RNCC: 3 | RNVC: 2
717-262: RNCC: 5 | RNVC: 2
K15K0037-1: RNCC: 7 | RNVC: 2

14 Jun 2007

5975-01-587-9116
Electrical Equipment Mounting Base

015879116
582328-032: RNCC: 3 | RNVC: 2
S9553-CH-MMO-010 FIG 7-41-3: RNCC: 5 | RNVC: 2

25 Aug 2010

5975-01-535-1023
Conduit Outlet Cover

015351023
PLG100-S: RNCC: 3 | RNVC: 2
618AS253-4: RNCC: 3 | RNVC: 2
PLG100-S: RNCC: 5 | RNVC: 9

15 Nov 2005

5975-01-558-4419
Junction Box Assembly

015584419
3642776: RNCC: 3 | RNVC: 2
3642776: RNCC: 5 | RNVC: 9

9 Nov 2007

5975-01-568-1983
Junction Box

015681983
11192005: RNCC: 3 | RNVC: 2

22 Oct 2008

5975-01-557-2679
Junction Box

015572679
140-060XMS-03: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-546-8188
Chassis Base

015468188
61726109: RNCC: 3 | RNVC: 2

4 Jan 2007

5975-01-591-5865
Special Nozzle

015915865
748077-K01: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-533-8492
Electrical-Electronic Equipment Panel

015338492
3654AS475-1: RNCC: 3 | RNVC: 2
3654AS475-1: RNCC: 5 | RNVC: 2

29 Sep 2005

5975-01-551-4368
Flexible Metal Conduit Assembly

015514368
23A03205: RNCC: 3 | RNVC: 2

17 May 2007

5975-01-590-4185
Adapterelectrical

015904185
901-031-125-135: RNCC: 3 | RNVC: 2

3 Dec 2010

5975-01-496-8860
Electrical Conduit Adapter

014968860
711S084NF4040-4: RNCC: 3 | RNVC: 2
63A155258P263: RNCC: 5 | RNVC: 2
S4270-2440S-34-4: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-493-2773
Mounting Strap

014932773
17-1-5523-4: RNCC: 3 | RNVC: 2
17-1-5523-4: RNCC: 5 | RNVC: 9
17-1-5523-4: RNCC: 5 | RNVC: 9
17-1-5523-4: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-487-8477
Metallic Raceway Assembly

014878477
11686113: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-443-2307
Electrical Equipment Mounting Base

014432307
A3103996: RNCC: 3 | RNVC: 2

4 Apr 1997

5975-01-502-9391
Junction Box

015029391
D40006APC: RNCC: 3 | RNVC: 2
D40006A: RNCC: 5 | RNVC: 9

26 Nov 2002

5975-01-480-2537
Flexible Metal Conduit Assembly

014802537
749-298-3: RNCC: 3 | RNVC: 2
802027107403-3: RNCC: 5 | RNVC: 2

13 Nov 2000

5975-01-455-7858
Electrical Wall Plate

014557858
82-2729881-1: RNCC: 3 | RNVC: 2
A3178943-1: RNCC: 7 | RNVC: 2

15 May 1998

5975-01-500-3576
Electrical Conduit Wye

015003576
HCT5AB10-10-10AI: RNCC: 3 | RNVC: 2
HCT5 & 6: RNCC: D | RNVC: 9

22 Aug 2002

5975-01-408-4000
Switch Terminal Cover

014084000
5267672-001: RNCC: 3 | RNVC: 2
5267672: RNCC: D | RNVC: 9

16 Feb 1995

5975-01-511-7429
Electrical Cable Protector

015117429
CP1X125-GP-B: RNCC: 3 | RNVC: 9

14 Aug 2003

5975-01-517-6642
Electrical Equipment Foot

015176642
10208-1027-01: RNCC: 3 | RNVC: 2

17 Feb 2004

5975-01-485-7286
Electrical-Electronic Equipment Chassis

014857286
JPI300: RNCC: 3 | RNVC: 2

5 Jun 2001

5975-01-466-4953
Electrical-Electronic Equipment Chassis

014664953
10208-1209: RNCC: 3 | RNVC: 2

21 Jul 1999

5975-01-481-2244
Rigid Metal Conduit

014812244
863-000715: RNCC: 3 | RNVC: 2
IMC-1: RNCC: 5 | RNVC: 2

22 Dec 2000

5975-01-316-2272
Insulator Pin

013162272
1330-08663-01: RNCC: 3 | RNVC: 2

6 Mar 1990

5975-01-279-7596
Cable Strain Relief Bushing

012797596
040-2521: RNCC: 3 | RNVC: 2

25 May 1988

5975-01-217-0699
Electrical Conduit Adapter

012170699
K15K0017-3HWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9

20 Sep 1985

5975-01-275-8333
Electrical Nonmetallic Conduit Assembly

012758333
R58HA04D45W008: RNCC: 3 | RNVC: 2
R58HA04D45W008: RNCC: 3 | RNVC: 2
R58HA04D45W008: RNCC: 7 | RNVC: 2
R58HA04D45W008: RNCC: 7 | RNVC: 9
R58HA: RNCC: D | RNVC: 9

27 Mar 1988

5975-01-213-2866
Electrical Equipment Mounting Base

012132866
22061-8: RNCC: 3 | RNVC: 2
2625039G001: RNCC: 5 | RNVC: 2

25 Jul 1985

5975-01-123-8380
Electrical Equipment Mounting Base

011238380
T0BB-S2-B10: RNCC: 3 | RNVC: 2
T0BB-S2-B10: RNCC: 3 | RNVC: 9

18 Dec 1981

5975-01-152-5369
Cable Hanger

011525369
2215711-00: RNCC: 3 | RNVC: 2

4 May 1983

5975-01-198-0367
Head Junction

011980367
11911913N: RNCC: 3 | RNVC: 2
3199180: RNCC: 5 | RNVC: 9

4 Jan 1985

5975-01-195-3282
Blank Panel

011953282
1608094: RNCC: 3 | RNVC: 9
1608094: RNCC: 5 | RNVC: 9
1608094: RNCC: 5 | RNVC: 9
1608094: RNCC: 5 | RNVC: 9

28 Nov 1984

5975-01-157-5450
Rigid Nonmetallic Conduit

011575450
49407: RNCC: 3 | RNVC: 9
49407: RNCC: 5 | RNVC: 9
A53AG11: RNCC: 5 | RNVC: 9

8 Jul 1983

5975-01-121-4324
Junction Box Cover

011214324
188C1108G1: RNCC: 3 | RNVC: 2
153C7131G2: RNCC: 5 | RNVC: 9

5 Nov 1981

5975-01-195-0086
Blank Panel

011950086
1608089: RNCC: 3 | RNVC: 2
1608089: RNCC: 5 | RNVC: 9

21 Nov 1984

5975-00-990-5354
Pole Step

009905354
575709: RNCC: 3 | RNVC: 2
575709: RNCC: 3 | RNVC: 9
5-4-4964: RNCC: 5 | RNVC: 1
146002-8: RNCC: 5 | RNVC: 9
73892421: RNCC: 5 | RNVC: 9
C30555: RNCC: 5 | RNVC: 9
575709: RNCC: 5 | RNVC: 9
575709: RNCC: 5 | RNVC: 9
600: RNCC: 5 | RNVC: 9
73892421: RNCC: C | RNVC: 1

8 Nov 1966

5975-00-589-2589
Electrical Equipment Mounting Base

005892589
91894-2: RNCC: 3 | RNVC: 2
605473-1: RNCC: 5 | RNVC: 2
605473-1: RNCC: 5 | RNVC: 9
91894-2: RNCC: 5 | RNVC: 9
1150-1: RNCC: 5 | RNVC: 9

5 Feb 1989

5975-00-178-1584
Stuffing Tube

001781584
M24235/11-01: RNCC: 2 | RNVC: 2
MIL-S-24235/11: RNCC: 4 | RNVC: 1
9-S-4799-L REV F: RNCC: 5 | RNVC: 1
9S4799LALT3: RNCC: 5 | RNVC: 1
SYMBOL 1853: RNCC: 5 | RNVC: 1
SYMBOL 1853: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-178-0760
Stuffing Tube

001780760
M24235-10-10-1609: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-479-8050
Electrical Cable Assembly Protector

004798050
780022-1: RNCC: 3 | RNVC: 2
780022-1: RNCC: 5 | RNVC: 2
715639-1: RNCC: 5 | RNVC: 9

8 Mar 1972

5975-01-701-8335
Ground Rod

10 Jun 2022

5975-01-697-5450
Stuffing Tube Adapter

016975450
SEEPA-S-C-C: RNCC: 3 | RNVC: 2
12665597: RNCC: 7 | RNVC: 2
12665597-002: RNCC: 7 | RNVC: 2

27 Sep 2021

5975-01-694-4600
Electrical Box Connector

016944600
987-0002-682: RNCC: 3 | RNVC: 2

2 Apr 2021

5975-01-694-3036
Raceway Cover

016943036
1109200319-2: RNCC: 3 | RNVC: 2
1109200319: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-3032
Raceway Cover

016943032
1109200282-1: RNCC: 3 | RNVC: 2
1109200282: RNCC: D | RNVC: 9

26 Mar 2021

5975-01-694-2613
Junction Box

016942613
78550-01418-041: RNCC: 3 | RNVC: 2
78550-01418: RNCC: C | RNVC: 1

24 Mar 2021

5975-01-693-7712
Stuffing Tube

016937712
F1836M TYPE-1-001: RNCC: 3 | RNVC: 2
311-8592608 FIND NUMBER 9: RNCC: C | RNVC: 1
311-8592608: RNCC: D | RNVC: 9

4 Mar 2021

5975-01-692-4820
Electrical Equipment Rack

016924820
5HK01195-103: RNCC: 3 | RNVC: 2

16 Dec 2020

5975-01-690-0166
Junction Box

016900166
JBP1DIG: RNCC: 3 | RNVC: 1

21 Jul 2020

5975-01-689-9773
Electrical-Electronic Equipment Chassis

016899773
11-0824: RNCC: 3 | RNVC: 2

20 Jul 2020

5975-01-689-9555
Cable Terminal Chamber

016899555
1833111: RNCC: 3 | RNVC: 1

17 Jul 2020

5975-01-688-8414
Electrical-Electronic Equipment Chassis

016888414
PS400-250-CHAS-5-004: RNCC: 3 | RNVC: 2
21012A1012-01: RNCC: 7 | RNVC: 2

28 May 2020

5975-01-688-8400
Electrical-Electronic Equipment Chassis

016888400
PS400-250-CHAS-4-004: RNCC: 3 | RNVC: 2
21012A1013-01: RNCC: 7 | RNVC: 2

28 May 2020

5975-01-687-6401
Electrical Cable Protector

016876401
A1707809-2: RNCC: 3 | RNVC: 2

10 Apr 2020

5975-01-687-2446
Mounting Plate

016872446
57710P112102: RNCC: 3 | RNVC: 2

24 Mar 2020

5975-01-685-9185
Electrical Equipment Rack

016859185
5HK01195-101: RNCC: 3 | RNVC: 2

21 Jan 2020

5975-01-684-1300
Electrical Cable Protector

016841300
12648921: RNCC: 3 | RNVC: 2

22 Oct 2019

5975-01-680-6288
Electrical-Electronic Equipment Panel

016806288
011594-AY: RNCC: 3 | RNVC: 2

14 May 2019

5975-01-678-7299
Electrical-Electronic Equipment Chassis

016787299
304A460-101: RNCC: 3 | RNVC: 2

22 Feb 2019

5975-01-678-7295
Electrical-Electronic Equipment Chassis

016787295
304A460-102: RNCC: 3 | RNVC: 2

22 Feb 2019

5975-01-678-7135
Electrical-Electronic Equipment Chassis

016787135
4200373L1#AC: RNCC: 3 | RNVC: 2
1058193: RNCC: 5 | RNVC: 2
N003228-001: RNCC: 5 | RNVC: 2

21 Feb 2019

5975-01-678-6065
Electrical Tie Down Mounting Base

016786065
CB4021E3N16: RNCC: 3 | RNVC: 2

14 Feb 2019

5975-01-678-0561
Flexible Nonmetallic Conduit

016780561
8431: RNCC: 3 | RNVC: 2
1058418: RNCC: 5 | RNVC: 2

18 Jan 2019

5975-01-677-5275
Electrical-Electronic Equipment Panel

016775275
12602328: RNCC: 3 | RNVC: 2
12602328: RNCC: C | RNVC: 1

18 Dec 2018

5975-01-676-4179
Electronic Equipment Mounting Tray

016764179
304A360-1: RNCC: 3 | RNVC: 2

26 Oct 2018

5975-01-675-7531
Electrical-Electronic Equipment Chassis

016757531
170-037197-G002: RNCC: 3 | RNVC: 2

25 Sep 2018

5975-01-675-5466
Interface Video

016755466
1775-25-2224-01: RNCC: 3 | RNVC: 2

16 Sep 2018

5975-01-675-3677
Electrical Grounding Plate

016753677
12604856: RNCC: 3 | RNVC: 2
12604856: RNCC: 5 | RNVC: 2

6 Sep 2018

5975-01-673-9454
Junction Box

016739454
008295: RNCC: 3 | RNVC: 2

6 Jul 2018

5975-01-673-8501
Mounting Plate

016738501
09024C5229: RNCC: 3 | RNVC: 2

29 Jun 2018

5975-01-673-4628
Electrical Components Tie Down Strap

016734628
PLT1.5M-M00: RNCC: 3 | RNVC: 2

14 Jun 2018

5975-01-672-6256
Cable Marker Sleeve

016726256
TMS-SCE-1K-1-2.0-9: RNCC: 3 | RNVC: 2
101416-5: RNCC: 7 | RNVC: 2

10 May 2018

5975-01-672-5808
Cable Marker Sleeve

016725808
TMS-SCE-1K-1/2-2.0-9: RNCC: 3 | RNVC: 2

8 May 2018

5975-01-672-4838
Cable Marker Sleeve

016724838
TMS-SCE-1K-1 1/2-2.0-4: RNCC: 3 | RNVC: 2

3 May 2018

5975-01-671-8807
Cable Marker Sleeve

016718807
TMS-SCE-1K-3/4-2.0-4: RNCC: 3 | RNVC: 2
C-MCD160002: RNCC: D | RNVC: 9

13 Apr 2018

5975-01-671-1683
Electrical-Electronic Equipment Chassis

016711683
8629025-01: RNCC: 3 | RNVC: 2
1505037-01: RNCC: 5 | RNVC: 9
8629025: RNCC: D | RNVC: 9

16 Mar 2018

5975-01-670-3336
Electrical Equipment Mounting Base

016703336
270-2712-010: RNCC: 3 | RNVC: 2

16 Feb 2018

5975-01-669-7988
Interconnecting Cabinet

016697988
8592613-105: RNCC: 3 | RNVC: 2
324-8592613 FN 4: RNCC: C | RNVC: 1

22 Jan 2018

5975-01-669-4254
Electrical Tie Down Mounting Base

016694254
STBP19M14: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-669-1211
Electrical Nonmetallic Conduit Assembly

016691211
A52CE12: RNCC: 3 | RNVC: 2
4EUC2: RNCC: 5 | RNVC: 2

21 Dec 2017

5975-01-668-2033
Blank Panel

016682033
246623: RNCC: 3 | RNVC: 9
MIL246623: RNCC: 5 | RNVC: 2

14 Nov 2017

5975-01-667-8014
Blank Panel

016678014
246624: RNCC: 3 | RNVC: 9
MIL246624: RNCC: 5 | RNVC: 2

31 Oct 2017

5975-01-666-7892
Cable Strain Relief Bushing

016667892
SECP16BA: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-7396
Junction Box

016667396
5342-0: RNCC: 3 | RNVC: 2

19 Sep 2017

5975-01-666-1030
Electrical Tie Down Mounting Base

016661030
09003D1104-20: RNCC: 3 | RNVC: 2

23 Aug 2017

5975-01-665-3123
Junction Box

016653123
BN4040403SS: RNCC: 3 | RNVC: 2

25 Jul 2017

5975-01-664-6118
Electrical Components Tie Down Strap

016646118
514-02098-99: RNCC: 3 | RNVC: 2
PLT2M-M30: RNCC: 5 | RNVC: 9

27 Jun 2017

5975-01-664-6108
Electrical Conduit Adapter

016646108
558-11571-58: RNCC: 3 | RNVC: 2
300AS001N1404-4: RNCC: 5 | RNVC: 9

27 Jun 2017

5975-01-663-8882
Electrical-Electronic Equipment Chassis

016638882
6307254: RNCC: 3 | RNVC: 2

26 May 2017

5975-01-663-2678
Electrical-Electronic Equipment Panel

016632678
6991158: RNCC: 3 | RNVC: 2

3 May 2017

5975-01-663-0702
Handle Assy

016630702
150-038838-0001: RNCC: 3 | RNVC: 2
150-038838: RNCC: 5 | RNVC: 2

25 Apr 2017

5975-01-662-9890
Blank Panel

016629890
6181477: RNCC: 3 | RNVC: 2

24 Apr 2017

5975-01-662-5448
Electrical-Electronic Equipment Chassis

016625448
6181292: RNCC: 3 | RNVC: 2

11 Apr 2017

5975-01-662-5288
Electrical Equipment Mounting Base

016625288
010-6027-000: RNCC: 3 | RNVC: 2

11 Apr 2017

5975-01-662-4762
Electrical-Electronic Equipment Chassis

016624762
5190175: RNCC: 3 | RNVC: 2

7 Apr 2017

5975-01-662-3691
Junction Box

016623691
5189859: RNCC: 3 | RNVC: 2

5 Apr 2017

5975-01-662-2967
Junction Box

016622967
5262521: RNCC: 3 | RNVC: 2

3 Apr 2017

5975-01-662-2805
Electrical-Electronic Equipment Chassis

016622805
5262585: RNCC: 3 | RNVC: 2

31 Mar 2017

5975-01-662-0553
Mounting Plate

016620553
010-6028-000: RNCC: 3 | RNVC: 2

24 Mar 2017

5975-01-661-7951
Electrical-Electronic Equipment Chassis

016617951
5188336: RNCC: 3 | RNVC: 2

15 Mar 2017

5975-01-661-7300
Junction Box

016617300
5189853: RNCC: 3 | RNVC: 2

14 Mar 2017

5975-01-661-6958
Junction Box

016616958
5189839: RNCC: 3 | RNVC: 2

13 Mar 2017

5975-01-661-4262
Electrical Components Tie Down Strap

016614262
70215K51: RNCC: 3 | RNVC: 2

2 Mar 2017

5975-01-661-1270
Electrical Equipment Mounting Base

016611270
MS91405-C2C: RNCC: 2 | RNVC: 2

16 Feb 2017

5975-01-661-0110
Chassis Base

016610110
576-0001-F10-04: RNCC: 3 | RNVC: 2

13 Feb 2017

5975-01-660-9591
Cable Hanger

016609591
LBP-4A: RNCC: 3 | RNVC: 9

10 Feb 2017

5975-01-660-9293
Electrical Equipment Cabinet

016609293
4216186: RNCC: 3 | RNVC: 2

9 Feb 2017

5975-01-660-9278
Electrical Equipment Cabinet

016609278
3959219: RNCC: 3 | RNVC: 2

9 Feb 2017

5975-01-660-9274
Electrical Equipment Cabinet

016609274
4216185: RNCC: 3 | RNVC: 2

9 Feb 2017

5975-01-660-9262
Electrical Equipment Cabinet

016609262
3959218: RNCC: 3 | RNVC: 2

9 Feb 2017

5975-01-660-8794
Electronic Equipment Mounting Tray

016608794
822-2477-002: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-660-3892
Electrical Box Sealing Flange

016603892
ALA3810B: RNCC: 3 | RNVC: 2

19 Jan 2017

5975-01-660-3147
Electrical Conduit Coupling

016603147
ALA01: RNCC: 3 | RNVC: 2

17 Jan 2017

5975-01-659-9816
Raceway Cover

016599816
ALA-F: RNCC: 3 | RNVC: 2

28 Dec 2016

5975-01-659-6001
Junction Box

016596001
13015876: RNCC: 3 | RNVC: 2

6 Dec 2016

5975-01-659-5971
Electrical Equipment Mounting Base

016595971
A1-39262D: RNCC: 3 | RNVC: 2

6 Dec 2016

5975-01-659-4605
Junction Box

016594605
010-1141-000: RNCC: 3 | RNVC: 2

29 Nov 2016

5975-01-658-7878
Electrical Cable Nipple

016587878
230E3V14: RNCC: 3 | RNVC: 2
3230E3V14: RNCC: 5 | RNVC: 9
2517178C1: RNCC: 7 | RNVC: 2

18 Oct 2016

5975-01-658-7873
Electrical Cable Nipple

016587873
230E3V02: RNCC: 3 | RNVC: 2
2517177C1: RNCC: 7 | RNVC: 2

18 Oct 2016

5975-01-657-4328
Mounting Plate

016574328
G662052-51: RNCC: 3 | RNVC: 2
G662052: RNCC: D | RNVC: 9

12 Aug 2016

5975-01-657-0254
Fanning Strip

016570254
68A780618-1003: RNCC: 3 | RNVC: 2
68A780618: RNCC: D | RNVC: 9

28 Jul 2016

5975-01-656-6970
Electrical-Electronic Equipment Chassis

016566970
280574-01: RNCC: 3 | RNVC: 2

14 Jul 2016

5975-01-656-5290
Electrical Equipment Shelf

016565290
EA101209V20: RNCC: 3 | RNVC: 2

7 Jul 2016

5975-01-655-6402
Electrical-Electronic Equipment Chassis

016556402
8200-9: RNCC: 3 | RNVC: 2

3 Jun 2016

5975-01-655-2740
Electrical Equipment Rack

016552740
284T2023-7: RNCC: 3 | RNVC: 1

23 May 2016

5975-01-655-0524
Electrical Components Tie Down Strap

016550524
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-35-0: RNCC: 3 | RNVC: 2
MS3367-35-0: RNCC: 3 | RNVC: 9

17 May 2016

5975-01-654-7863
Electrical Equipment Rack

016547863
284T2032-104: RNCC: 3 | RNVC: 1

9 May 2016

5975-01-654-7858
Electrical Equipment Rack

016547858
284T1743-1: RNCC: 3 | RNVC: 1

9 May 2016

5975-01-654-5097
Blank Panel

016545097
BACP10U0787B: RNCC: 3 | RNVC: 2
BACP10U0787B: RNCC: 5 | RNVC: 9

2 May 2016

5975-01-654-4337
Electrical-Electronic Equipment Chassis

016544337
280568-01: RNCC: 3 | RNVC: 2
280568-01: RNCC: 5 | RNVC: 2

28 Apr 2016

5975-01-654-3970
Electrical Cable Nipple

016543970
202F221-71/86-0: RNCC: 3 | RNVC: 2

27 Apr 2016

5975-01-653-8995
Electrical Equipment Leg

016538995
12007D0003-0: RNCC: 1 | RNVC: 2
10236: RNCC: 3 | RNVC: 2
12007D0003: RNCC: D | RNVC: 9

11 Apr 2016

5975-01-653-8975
Electrical Equipment Leg

016538975
12007D0004-0: RNCC: 1 | RNVC: 2
10237: RNCC: 3 | RNVC: 2
12007D0004: RNCC: D | RNVC: 9

11 Apr 2016

5975-01-653-6634
Chassis Base

016536634
13064124: RNCC: 3 | RNVC: 2

31 Mar 2016

5975-01-653-5589
Electrical Equipment Cabinet

016535589
1077-4000008-01: RNCC: 3 | RNVC: 2
1077-4000008: RNCC: D | RNVC: 9

29 Mar 2016

5975-01-653-5512
Electrical Box Connector

016535512
115E6374G1: RNCC: 3 | RNVC: 1

28 Mar 2016

5975-01-653-2671
Stud Assy

016532671
HAB18619-02: RNCC: 3 | RNVC: 1

16 Mar 2016

5975-01-652-9702
Electrical Equipment Mounting Base

016529702
7019249: RNCC: 3 | RNVC: 2

9 Mar 2016

5975-01-652-9182
Electrical-Electronic Equipment Panel

016529182
TSE-P01-03-002: RNCC: 3 | RNVC: 2

8 Mar 2016

5975-01-652-3640
Electrical Conduit Elbow

016523640
3LL22: RNCC: 3 | RNVC: 2
3LL22: RNCC: 5 | RNVC: 2
36.5MET30.5586-4376: RNCC: 5 | RNVC: 9

19 Feb 2016

5975-01-651-7155
Flexible Metal Conduit

016517155
80211: RNCC: 3 | RNVC: 2

27 Jan 2016

5975-01-651-6486
Junction Box Cover

016516486
292A865-1: RNCC: 3 | RNVC: 2
292A865: RNCC: D | RNVC: 9

25 Jan 2016

5975-01-651-6419
Junction Box Cover

016516419
292A866-1: RNCC: 3 | RNVC: 2
292A866: RNCC: D | RNVC: 9

25 Jan 2016

5975-01-651-3128
Electrical Tie Down Mounting Base

016513128
1797774-1: RNCC: 3 | RNVC: 2

13 Jan 2016

5975-01-650-3843
Mounting Plate

016503843
0N706869-1: RNCC: 3 | RNVC: 2

1 Dec 2015

5975-01-650-0779
Conduit Outlet

016500779
479W3602-2: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-649-9743
Electrical Equipment Mounting Base

016499743
010-3209-000: RNCC: 3 | RNVC: 2

17 Nov 2015

5975-01-649-3630
Electrical Box Connector

016493630
233T6210-5: RNCC: 3 | RNVC: 1

27 Oct 2015

5975-01-648-8230
Cable Hanger

016488230
774619-B21: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-648-2118
Electrical-Electronic Equipment Chassis

016482118
SRC2027: RNCC: 3 | RNVC: 2

17 Sep 2015

5975-01-648-2016
Electrical-Electronic Equipment Chassis

016482016
77A587673P1: RNCC: 3 | RNVC: 2

17 Sep 2015

5975-01-647-7890
Electrical Equipment Mounting Base

016477890
2401414-1: RNCC: 3 | RNVC: 2

1 Sep 2015

5975-01-647-6761
Electrical-Electronic Equipment Chassis

016476761
30117-1102-0102: RNCC: 3 | RNVC: 2

27 Aug 2015

5975-01-647-4401
Electrical Cable Protector

016474401
3899263C1: RNCC: 3 | RNVC: 2

21 Aug 2015

5975-01-646-7108
Blank Panel

016467108
010-6046-000: RNCC: 3 | RNVC: 2

29 Jul 2015

5975-01-646-7097
Electrical-Electronic Equipment Chassis

016467097
010-6045-002: RNCC: 3 | RNVC: 2

29 Jul 2015

5975-01-646-6932
Electrical Equipment Mounting Base

016466932
010-2207-000: RNCC: 3 | RNVC: 2

28 Jul 2015

5975-01-646-0586
Electrical Cable Protector

016460586
50-107-B05T: RNCC: 3 | RNVC: 2
50-107-B05T: RNCC: 5 | RNVC: 2

10 Jul 2015

5975-01-646-0251
Electrical-Electronic Equipment Chassis

016460251
3937700C1: RNCC: 3 | RNVC: 2

9 Jul 2015

5975-01-645-9001
Electrical Equipment Mounting Base

016459001
901-031-363-123: RNCC: 3 | RNVC: 2

2 Jul 2015

5975-01-645-7774
Cable Marker Sleeve

016457774
PSPT-094-1WT: RNCC: 3 | RNVC: 2
C71791-001: RNCC: 7 | RNVC: 2

27 Jun 2015

5975-01-645-2942
Electrical-Electronic Equipment Chassis

016452942
30125-1103-0301: RNCC: 3 | RNVC: 2

10 Jun 2015

5975-01-644-9995
Electrical-Electronic Equipment Chassis

016449995
30127-1901-0304: RNCC: 3 | RNVC: 2

29 May 2015

5975-01-644-5378
Electrical-Electronic Equipment Chassis

016445378
09024B5231-01: RNCC: 3 | RNVC: 2

11 May 2015

5975-01-644-2605
Chassis Base

016442605
3014-0017-03-3: RNCC: 3 | RNVC: 2

28 Apr 2015

5975-01-643-8460
Electrical Equipment Mounting Base

016438460
899000540-01: RNCC: 3 | RNVC: 2

14 Apr 2015

5975-01-643-5112
Electrical-Electronic Equipment Panel

016435112
5210785-01: RNCC: 3 | RNVC: 2

3 Apr 2015

5975-01-643-5105
Electrical-Electronic Equipment Panel

016435105
5210811-12: RNCC: 3 | RNVC: 2

3 Apr 2015

5975-01-643-5107
Electrical-Electronic Equipment Panel

016435107
5211033-04: RNCC: 3 | RNVC: 2

3 Apr 2015

5975-01-643-4384
Electrical Equipment Foot

016434384
5220003-02: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4329
Electrical-Electronic Equipment Chassis

016434329
5211045-01: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-4312
Electrical-Electronic Equipment Chassis

016434312
5240014-15: RNCC: 3 | RNVC: 2

1 Apr 2015

5975-01-643-3199
Flexible Nonmetallic Conduit

016433199
310-8320: RNCC: 3 | RNVC: 2

27 Mar 2015

5975-01-643-0532
Electrical Conduit Adapter

016430532
23232X8: RNCC: 3 | RNVC: 2

18 Mar 2015

5975-01-642-8044
Electrical-Electronic Equipment Chassis

016428044
MCC16-RM: RNCC: 3 | RNVC: 2

10 Mar 2015

5975-01-642-1714
Cca-Comput Assy Nrp

016421714
63A170140G2: RNCC: 3 | RNVC: 2
PL 63E920411G5 REV C ITEM A1: RNCC: 5 | RNVC: 2
PL 63E920411G6 REV C: RNCC: D | RNVC: 9

17 Feb 2015

5975-01-642-0352
Electrical Components Tie Down Strap

016420352
0332-0941: RNCC: 3 | RNVC: 2

10 Feb 2015

5975-01-641-3864
Electrical Equipment Rack

016413864
733660-B21: RNCC: 3 | RNVC: 2
733660-B21: RNCC: 3 | RNVC: 9

20 Jan 2015

5975-01-641-2400
Cable Hanger

016412400
8355446: RNCC: 3 | RNVC: 2

14 Jan 2015

5975-01-633-6631
Electrical-Electronic Equipment Chassis

016336631
010M054-001: RNCC: 3 | RNVC: 2

28 Nov 2014

5975-01-633-1812
Electrical-Electronic Equipment Chassis

016331812
C6807-XL-FAN: RNCC: 3 | RNVC: 2
480-09-01764: RNCC: 7 | RNVC: 2

12 Nov 2014

5975-01-633-0837
Electrical Equipment Mounting Base

016330837
01-P53864R003: RNCC: 3 | RNVC: 2

6 Nov 2014

5975-01-633-0825
Chassis Base

016330825
097-0128-008: RNCC: 3 | RNVC: 2

6 Nov 2014

5975-01-633-0090
Electrical Equipment Mounting Base

016330090
9800-53864-0000: RNCC: 3 | RNVC: 2

5 Nov 2014

5975-01-632-7184
Interconnecting Box

016327184
901-175-575-109: RNCC: 3 | RNVC: 2

28 Oct 2014

5975-01-632-6515
Metallic Raceway

016326515
25-3163 01: RNCC: 3 | RNVC: 2

27 Oct 2014

5975-01-632-4226
Electrical-Electronic Equipment Chassis

016324226
15310-MA-FTA: RNCC: 3 | RNVC: 2

17 Oct 2014

5975-01-632-1629
Stuffing Tube

016321629
CD06MW-BR: RNCC: 3 | RNVC: 2

9 Oct 2014

5975-01-632-1395
Electrical Cable Nipple

016321395
BU-29-9: RNCC: 3 | RNVC: 2

8 Oct 2014

5975-01-631-9158
Electrical Tie Down Mounting Base

016319158
7566K47: RNCC: 3 | RNVC: 2

30 Sep 2014

5975-01-631-4371
Electrical Components Tie Down Strap

016314371
SW.5X8BK-10: RNCC: 3 | RNVC: 2
6605K12: RNCC: 5 | RNVC: 2

15 Sep 2014

5975-01-631-2040
Electrical Cable Protector

016312040
13015845: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-2031
Electrical Cable Protector

016312031
13015830: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-2026
Electrical Cable Protector

016312026
13015548: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-2021
Electrical Cable Protector

016312021
13015544: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-2013
Electrical Cable Protector

016312013
13015543: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-631-1497
Electrical Cable Protector

016311497
13015542: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-01-631-0365
Electrical Tie Down Mounting Base

016310365
SGABM25-AT-C0: RNCC: 3 | RNVC: 2

27 Aug 2014

5975-01-631-0212
Electrical Equipment Mounting Base

016310212
68A870386-1019: RNCC: 3 | RNVC: 2

26 Aug 2014

5975-01-630-8592
Conduit Outlet

016308592
11B3512711: RNCC: 3 | RNVC: 2
2IHD5-2: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-8486
Electrical Cable Protector

016308486
13015876: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-630-7669
Mounting Plate

016307669
13015742: RNCC: 3 | RNVC: 2

18 Aug 2014

5975-01-630-4753
Tie Wrap

016304753
T185: RNCC: 3 | RNVC: 2

6 Aug 2014

5975-01-630-4035
Electrical Tie Down Mounting Base

016304035
ABM100-A: RNCC: 3 | RNVC: 2

4 Aug 2014

5975-01-630-1923
Electrical Equipment Leg

016301923
A20000-99-164-21: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1747
Electrical Equipment Leg

016301747
A20000-99-164-22: RNCC: 3 | RNVC: 2
A20000-99-164-22: RNCC: 5 | RNVC: 2

28 Jul 2014

5975-01-630-1728
Electrical Equipment Rack

016301728
A20000-99-027-22: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1715
Crossarm Brace

016301715
A20000-99-165-21: RNCC: 3 | RNVC: 2

28 Jul 2014

5975-01-630-1581
Crossarm Brace

016301581
A20000-99-165-22: RNCC: 3 | RNVC: 2
A20000-99-165-22: RNCC: 5 | RNVC: 2

25 Jul 2014

5975-01-629-8244
Electrical Equipment Rack

016298244
12566095: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8240
Junction Box

016298240
12566461: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8234
Conduit Outlet

016298234
12566477: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-7059
Electrical Equipment Mounting Base

016297059
03-2832600-1: RNCC: 3 | RNVC: 2

11 Jul 2014

5975-01-629-4225
Electronic Equipment Mounting Tray

016294225
717598: RNCC: 3 | RNVC: 2
10-2855722-1: RNCC: 5 | RNVC: 2

30 Jun 2014

5975-01-629-3290
Electrical Equipment Mounting Base

016293290
300A452-1: RNCC: 3 | RNVC: 2

25 Jun 2014

5975-01-629-3264
Electrical Standardized Components Case

016293264
93740: RNCC: 3 | RNVC: 2

25 Jun 2014

5975-01-628-8708
Junction Box

016288708
5361-0: RNCC: 3 | RNVC: 2
S-47: RNCC: 5 | RNVC: 2
06A8150047: RNCC: 7 | RNVC: 2

12 Jun 2014

5975-01-628-6524
Electrical Cable Protector

016286524
12023B1002: RNCC: 3 | RNVC: 2

4 Jun 2014

5975-01-628-6490
Electrical Cable Protector

016286490
12023B1003: RNCC: 3 | RNVC: 2

4 Jun 2014

5975-01-628-2314
Electrical Equipment Cabinet

016282314
93001397-01: RNCC: 3 | RNVC: 2

14 May 2014

5975-01-628-1756
Conduit Outlet

016281756
LT50: RNCC: 3 | RNVC: 2

13 May 2014

5975-01-628-0625
Electrical Components Tie Down Strap

016280625
826/01092: RNCC: 3 | RNVC: 2

7 May 2014

5975-01-627-7572
Mounting Plate

016277572
3960633: RNCC: 3 | RNVC: 2
3960633: RNCC: 5 | RNVC: 9

25 Apr 2014

5975-01-627-7560
Conduit Outlet Cover

016277560
3899259: RNCC: 3 | RNVC: 2
3899259: RNCC: 5 | RNVC: 9

25 Apr 2014

5975-01-626-3808
Electrical Conduit Adapter

016263808
CD13N3-BK: RNCC: 3 | RNVC: 2

7 Mar 2014

5975-01-626-3164
Flexible Metal Conduit

016263164
34251: RNCC: 3 | RNVC: 2
7127K6: RNCC: 5 | RNVC: 2
11A7000926: RNCC: 7 | RNVC: 2

6 Mar 2014

5975-01-625-2674
Mounting Plate

016252674
68A870386-1008: RNCC: 3 | RNVC: 2

29 Jan 2014

5975-01-625-2489
Electrical Equipment Leg Section

016252489
94713: RNCC: 3 | RNVC: 2

29 Jan 2014

5975-01-624-9764
Junction Box

016249764
IF-8810: RNCC: 3 | RNVC: 2

21 Jan 2014

5975-01-624-9258
Junction Box

016249258
717519-1: RNCC: 3 | RNVC: 2

17 Jan 2014

5975-01-624-4792
Electrical-Electronic Equipment Chassis

016244792
RMG-2000-000B: RNCC: 3 | RNVC: 2

3 Jan 2014

5975-01-624-3078
Electrical Tie Down Mounting Base

016243078
561-TA00600: RNCC: 3 | RNVC: 2
04-21806: RNCC: 7 | RNVC: 2

23 Dec 2013

5975-01-624-1994
Electrical-Electronic Equipment Panel

016241994
282A550-1: RNCC: 3 | RNVC: 2

19 Dec 2013

5975-01-624-1776
Electrical-Electronic Equipment Panel

016241776
282A551-1: RNCC: 3 | RNVC: 2

18 Dec 2013

5975-01-623-6191
Electrical Components Tie Down Strap

016236191
1STRAP1X12: RNCC: 3 | RNVC: 2
17-3-3716-1: RNCC: 7 | RNVC: 2

21 Nov 2013

5975-01-623-5600
Electrical Box Connector

016235600
STR3890: RNCC: 3 | RNVC: 2
3421: RNCC: 5 | RNVC: 2
7119K19: RNCC: 5 | RNVC: 2
3421: RNCC: 5 | RNVC: 9
17-3-2529-1: RNCC: 7 | RNVC: 2

19 Nov 2013

5975-01-623-1252
Electrical-Electronic Equipment Chassis

016231252
Z0809: RNCC: 3 | RNVC: 2

1 Nov 2013

5975-01-623-0088
Junction Box

016230088
4700441: RNCC: 3 | RNVC: 9
4700441: RNCC: 5 | RNVC: 2

29 Oct 2013

5975-01-622-4141
Switch Box Case

016224141
2058776: RNCC: 3 | RNVC: 9
2058776: RNCC: 5 | RNVC: 2

7 Oct 2013

5975-01-622-3529
Electrical-Electronic Equipment Chassis

016223529
1207-0005-002: RNCC: 3 | RNVC: 2
FA00232: RNCC: 5 | RNVC: 2

4 Oct 2013

5975-01-622-3082
Conduit Outlet

016223082
IHD3-1: RNCC: 3 | RNVC: 2
11B5091455: RNCC: 7 | RNVC: 2

3 Oct 2013

5975-01-621-6389
Electrical Equipment Mounting Base

016216389
15883-200: RNCC: 3 | RNVC: 2

13 Sep 2013

5975-01-621-5977
Knockout Reducing Washer

016215977
7513K373: RNCC: 3 | RNVC: 2

12 Sep 2013

5975-01-621-3992
Mounting Plate

016213992
263A994-1: RNCC: 3 | RNVC: 2

5 Sep 2013

5975-01-621-1400
Electrical Tie Down Mounting Base

016211400
PM2H25-C: RNCC: 3 | RNVC: 2

26 Aug 2013

5975-01-620-8655
Cable Hanger

016208655
400-8283592 ITEM 2: RNCC: 3 | RNVC: 2

14 Aug 2013

5975-01-620-7698
Electrical Equipment Mounting Base

016207698
513727: RNCC: 3 | RNVC: 2
513727: RNCC: D | RNVC: 9

9 Aug 2013

5975-01-620-6321
Electrical-Electronic Equipment Chassis

016206321
CB33677-001: RNCC: 3 | RNVC: 2

1 Aug 2013

5975-01-620-4768
Electrical Components Tie Down Strap

016204768
VWOW-25RL: RNCC: 3 | RNVC: 2

25 Jul 2013

5975-01-619-9895
Junction Box

016199895
AG-JB4W: RNCC: 3 | RNVC: 2
4310703: RNCC: 5 | RNVC: 2
4310703: RNCC: 5 | RNVC: 2

25 Jun 2013

5975-01-619-5608
Electrical Cable Protector

016195608
512367: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5616
Electrical Cable Protector

016195616
512368: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5613
Electrical Cable Protector

016195613
512538: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5611
Electrical Cable Protector

016195611
512362: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5598
Electrical Cable Protector

016195598
512377: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5593
Electrical Cable Protector

016195593
512539: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-619-5578
Electrical Cable Protector

016195578
512444: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-618-5806
Flexible Metal Conduit

016185806
55091601: RNCC: 3 | RNVC: 9
74115K5: RNCC: 5 | RNVC: 2

29 Apr 2013

5975-01-618-4645
Mounting Plate

016184645
4297745: RNCC: 3 | RNVC: 2
4297745: RNCC: 5 | RNVC: 2

24 Apr 2013

5975-01-618-3870
Electrical Components Tie Down Strap

016183870
MLTC4H-LP316: RNCC: 3 | RNVC: 2
MLTC4H-LP316: RNCC: 5 | RNVC: 2

23 Apr 2013

5975-01-618-3652
Flexible Nonmetallic Conduit

016183652
LTC038GY: RNCC: 3 | RNVC: 2
LT10-GRY: RNCC: 5 | RNVC: 2

22 Apr 2013

5975-01-618-3654
Flexible Nonmetallic Conduit

016183654
LTC200GY: RNCC: 3 | RNVC: 2
LT16-GRY: RNCC: 5 | RNVC: 2

22 Apr 2013

5975-01-618-1965
Electrical Box Connector

016181965
449-050-051-101: RNCC: 3 | RNVC: 2

16 Apr 2013

5975-01-617-6934
Electrical-Electronic Equipment Panel

016176934
G32153: RNCC: 3 | RNVC: 2

1 Apr 2013

5975-01-617-0167
Electrical Conduit Coupling

016170167
7150K76: RNCC: 3 | RNVC: 2

7 Mar 2013

5975-01-617-0168
Electrical Conduit Coupling

016170168
7150K42: RNCC: 3 | RNVC: 2

7 Mar 2013

5975-01-617-0156
Rigid Metal Conduit

016170156
7126K13: RNCC: 3 | RNVC: 2

7 Mar 2013

5975-01-616-8106
Cable Hanger

016168106
11018G0094: RNCC: 3 | RNVC: 2

28 Feb 2013

5975-01-616-7400
Electrical Equipment Shelf

016167400
4308830: RNCC: 3 | RNVC: 2
4308830: RNCC: 5 | RNVC: 2

26 Feb 2013

5975-01-616-7395
Electrical Equipment Shelf

016167395
4296938: RNCC: 3 | RNVC: 2
4296938: RNCC: 5 | RNVC: 2

26 Feb 2013

5975-01-616-7394
Electrical Equipment Shelf

016167394
4297187: RNCC: 3 | RNVC: 2
4297187: RNCC: 5 | RNVC: 2

26 Feb 2013

5975-01-616-5352
Electrical Conduit Adapter

016165352
CD21NR-BR: RNCC: 3 | RNVC: 2
08018B4132: RNCC: 7 | RNVC: 2

19 Feb 2013

5975-01-616-2648
Stuffing Tube

016162648
NG-9512: RNCC: 3 | RNVC: 2
83F3333: RNCC: 5 | RNVC: 2

7 Feb 2013

5975-01-616-0220
Electrical Box Connector

016160220
CD29NA-MZ: RNCC: 3 | RNVC: 2
08018B4223: RNCC: 7 | RNVC: 2

30 Jan 2013

5975-01-616-0216
Electrical Box Connector

016160216
CD13NA-MZ: RNCC: 3 | RNVC: 2
08018B4147: RNCC: 7 | RNVC: 2

30 Jan 2013

5975-01-616-0028
Electrical Box Connector

016160028
CD29NR-BR: RNCC: 3 | RNVC: 2
08018B4217: RNCC: 7 | RNVC: 2

29 Jan 2013

5975-01-615-9827
Electronic Equipment Mounting Tray

016159827
82-2830988-1: RNCC: 3 | RNVC: 2
82-2830988-1: RNCC: 5 | RNVC: 9

29 Jan 2013

5975-01-615-9461
Conduit Outlet

016159461
T17SA: RNCC: 3 | RNVC: 2
08018B4125: RNCC: 7 | RNVC: 2

28 Jan 2013

5975-01-615-9453
Junction Box

016159453
8125: RNCC: 3 | RNVC: 2
08018B4049: RNCC: 7 | RNVC: 2

28 Jan 2013

5975-01-615-8681
Conduit Outlet

016158681
LR17SA: RNCC: 3 | RNVC: 2
08018B4129: RNCC: 7 | RNVC: 2

25 Jan 2013

5975-01-615-8514
Electrical-Electronic Equipment Panel

016158514
D0013145-2001: RNCC: 3 | RNVC: 2

24 Jan 2013

5975-01-615-8400
Electrical Conduit Adapter

016158400
2832: RNCC: 3 | RNVC: 2
7150K11: RNCC: 5 | RNVC: 2
08018B4145: RNCC: 7 | RNVC: 2

24 Jan 2013

5975-01-615-8392
Electrical Conduit Adapter

016158392
2922-8: RNCC: 3 | RNVC: 2
1841T31: RNCC: 5 | RNVC: 2
08018B4138: RNCC: 7 | RNVC: 2

24 Jan 2013

5975-01-615-1515
Electrical-Electronic Equipment Chassis

016151515
700-0077-000: RNCC: 3 | RNVC: 2

2 Jan 2013

5975-01-615-0190
Electrical Cable Nipple

016150190
HSEC050: RNCC: 3 | RNVC: 9

21 Dec 2012

5975-01-614-7649
Electrical Components Tie Down Strap

016147649
80005K55: RNCC: 3 | RNVC: 2

14 Dec 2012

5975-01-614-6852
Electrical Equipment Rack

016146852
MRC-MIK002: RNCC: 3 | RNVC: 2

12 Dec 2012

5975-01-614-5255
Junction Box Extension

016145255
2IHE: RNCC: 3 | RNVC: 2

6 Dec 2012

5975-01-614-5244
Conduit Outlet

016145244
IH5S2-2: RNCC: 3 | RNVC: 2

6 Dec 2012

5975-01-614-5233
Conduit Outlet

016145233
2IH3-2: RNCC: 3 | RNVC: 2

6 Dec 2012

5975-01-614-3932
Electrical-Electronic Equipment Chassis

016143932
6578-1420-0500: RNCC: 3 | RNVC: 2
6012481-005: RNCC: 7 | RNVC: 2
6012481: RNCC: D | RNVC: 9

4 Dec 2012

5975-01-614-2045
Electrical Wall Plate

016142045
3889579C2: RNCC: 3 | RNVC: 2

29 Nov 2012

5975-01-614-2046
Electrical Wall Plate

016142046
3896038C2: RNCC: 3 | RNVC: 2

29 Nov 2012

5975-01-614-2032
Electrical-Electronic Equipment Chassis

016142032
3896890C2: RNCC: 3 | RNVC: 2

29 Nov 2012

5975-01-614-2033
Electrical-Electronic Equipment Chassis

016142033
3888496C91: RNCC: 3 | RNVC: 2

29 Nov 2012

5975-01-614-0644
Electrical Components Tie Down Strap

016140644
370-0015-001: RNCC: 3 | RNVC: 2

26 Nov 2012

5975-01-612-8437
Electrical Equipment Shelf

016128437
4001944-KD: RNCC: 3 | RNVC: 2

22 Oct 2012

5975-01-612-7735
Electrical Equipment Shelf

016127735
4001945-4U-KD: RNCC: 3 | RNVC: 2

19 Oct 2012

5975-01-612-7651
Electrical Equipment Shelf

016127651
09021A1027: RNCC: 3 | RNVC: 2

19 Oct 2012

5975-01-612-6980
Electrical-Electronic Equipment Chassis

016126980
6578-1000-0500: RNCC: 3 | RNVC: 2
6012481-003: RNCC: 5 | RNVC: 2
S20A113: RNCC: 5 | RNVC: 9

18 Oct 2012

5975-01-612-0921
Electrical Equipment Drawer

016120921
RDRW1900716BK1: RNCC: 3 | RNVC: 2

3 Oct 2012

5975-01-612-0926
Electrical Box Connector

016120926
NHC1037CR: RNCC: 3 | RNVC: 2

3 Oct 2012

5975-01-611-9640
Electrical Equipment Rack

016119640
08020E0013: RNCC: 3 | RNVC: 2

28 Sep 2012

5975-01-611-8569
Electrical Wall Plate

016118569
MTM-10591: RNCC: 3 | RNVC: 2

26 Sep 2012

5975-01-611-8562
Electrical Cable Protector

016118562
12522332: RNCC: 3 | RNVC: 2

26 Sep 2012

5975-01-611-6983
Electrical Components Tie Down Strap

016116983
712362: RNCC: 3 | RNVC: 2

24 Sep 2012

5975-01-610-6618
Electrical Box Connector

016106618
5011081R1: RNCC: 3 | RNVC: 2
3833153C5: RNCC: 5 | RNVC: 9

24 Aug 2012

5975-01-610-2924
Electrical Components Tie Down Strap

016102924
LIC9N-266: RNCC: 3 | RNVC: 2

14 Aug 2012

5975-01-609-3481
Electrical Components Tie Down Strap

016093481
332/D3660: RNCC: 3 | RNVC: 2

24 Jul 2012

5975-01-609-3223
Electrical Components Tie Down Strap

016093223
332/D3656: RNCC: 3 | RNVC: 2

23 Jul 2012

5975-01-609-3038
Electrical-Electronic Equipment Chassis

016093038
901-092-437-101: RNCC: 3 | RNVC: 2

23 Jul 2012

5975-01-608-8671
Flexible Metal Conduit Assembly

016088671
CA00886-860: RNCC: 3 | RNVC: 2

13 Jul 2012

5975-01-608-7590
Electrical-Electronic Equipment Chassis

016087590
10-210886-4: RNCC: 3 | RNVC: 2

10 Jul 2012

5975-01-608-6855
Electrical Tie Down Mounting Base

016086855
10044: RNCC: 3 | RNVC: 2

9 Jul 2012

5975-01-608-5427
Electrical Tie Down Mounting Base

016085427
MB4A0H4: RNCC: 3 | RNVC: 2
14000097: RNCC: 7 | RNVC: 2

2 Jul 2012

5975-01-608-3383
Electrical Tie Down Mounting Base

016083383
10810109: RNCC: 3 | RNVC: 2
10810109: RNCC: 3 | RNVC: 9
10810109: RNCC: 5 | RNVC: 2

25 Jun 2012

5975-01-607-8861
Cable Hanger

016078861
NMC1005-5: RNCC: 3 | RNVC: 2

16 Jun 2012

5975-01-607-8860
Cable Hanger

016078860
NMC1005-4: RNCC: 3 | RNVC: 2

16 Jun 2012

5975-01-607-2955
Electrical Components Tie Down Strap

016072955
7177K82: RNCC: 3 | RNVC: 2
P21176: RNCC: 5 | RNVC: 2
7177K35: RNCC: 5 | RNVC: 9

7 Jun 2012

5975-01-607-2608
Electrical Conduit Adapter

016072608
710-106NFA14B10C10: RNCC: 3 | RNVC: 2

6 Jun 2012

5975-01-607-1109
Electrical Components Tie Down Strap

016071109
CTB-07: RNCC: 3 | RNVC: 2

31 May 2012

5975-01-607-0435
Electrical Equipment Cabinet

016070435
433-8357167-140: RNCC: 3 | RNVC: 2
62030-500: RNCC: 5 | RNVC: 2
218071329: RNCC: 5 | RNVC: 2

30 May 2012

5975-01-606-5566
Electrical Equipment Shelf

016065566
1207-0040: RNCC: 3 | RNVC: 2

21 May 2012

5975-01-606-5160
Rigid Metal Conduit

016065160
206F4255: RNCC: 3 | RNVC: 2

18 May 2012

5975-01-606-4179
Flexible Metal Conduit Assembly

016064179
23A02931-42: RNCC: 3 | RNVC: 2

17 May 2012

5975-01-606-4174
Flexible Metal Conduit Assembly

016064174
23A02931-58: RNCC: 3 | RNVC: 2

17 May 2012

5975-01-605-9952
Electrical-Electronic Equipment Chassis

016059952
901-005-649-101: RNCC: 3 | RNVC: 2

2 May 2012

5975-01-605-9577
Electrical Conduit Adapter

016059577
901-031-125-131: RNCC: 3 | RNVC: 2

2 May 2012

5975-01-605-8025
Metallic Raceway Assembly

016058025
R0125378: RNCC: 3 | RNVC: 2
R0125378: RNCC: 5 | RNVC: 2
R0125378-0107: RNCC: D | RNVC: 9

25 Apr 2012

5975-01-605-1246
Flexible Metal Conduit Assembly

016051246
23A02931-50: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-0495
Flexible Metal Conduit Assembly

016050495
23A02931-52: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-0496
Rigid Metal Conduit

016050496
23A02881-18: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-604-8299
Flexible Metal Conduit Assembly

016048299
23A02931-51: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-603-8834
Electrical Cable Protector

016038834
40530064: RNCC: 3 | RNVC: 2

20 Mar 2012

5975-01-603-2021
Rigid Metal Conduit

016032021
10130008: RNCC: 3 | RNVC: 2
10130008: RNCC: 5 | RNVC: 9

23 Feb 2012

Load More Results