What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 101 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 101 of 176

5975-01-009-5749
Junction Box

010095749
ASE18X18X6: RNCC: 3 | RNVC: 2
AB-18186SB: RNCC: 3 | RNVC: 2
ESCB-18186: RNCC: 5 | RNVC: 9

13 Sep 1975

5975-01-009-5617
Electrical Entrance Cap

010095617
1548: RNCC: 3 | RNVC: 2
08200: RNCC: 5 | RNVC: 9
191: RNCC: 5 | RNVC: 9
1220: RNCC: 5 | RNVC: 9
1752: RNCC: 5 | RNVC: 9
26-125: RNCC: 5 | RNVC: 9
913: RNCC: 5 | RNVC: 9

13 Sep 1975

5975-01-009-3706
Slip-On Terminator

010093706
PAT1701: RNCC: 3 | RNVC: 2

9 Sep 1975

5975-01-008-6759
Electrical Conduit Bushing

010086759
BUC400: RNCC: 3 | RNVC: 2
1286: RNCC: 5 | RNVC: 9
3-400: RNCC: 5 | RNVC: 9
CB-60: RNCC: 5 | RNVC: 9

29 Aug 1975

5975-01-007-9748
Electrical Cable Nipple

010079748
639374: RNCC: 3 | RNVC: 2
639374: RNCC: 3 | RNVC: 9
639374: RNCC: 5 | RNVC: 9

15 Aug 1975

5975-01-007-9570
Cable Support

010079570
3323913: RNCC: 3 | RNVC: 2

15 Aug 1975

5975-01-007-6078
Cable Strain Relief Bushing

010076078
822: RNCC: 3 | RNVC: 2
822: RNCC: 5 | RNVC: 9

9 Aug 1975

5975-01-007-3498
Electrical-Electronic Equipment Chassis

010073498
113916: RNCC: 3 | RNVC: 2

2 Aug 1975

5975-01-007-0209
Junction Box

010070209
AB-884SB: RNCC: 3 | RNVC: 2
ASE8X8X4: RNCC: 3 | RNVC: 2
A-SE8X8X4: RNCC: 3 | RNVC: 2
SC884G: RNCC: 5 | RNVC: 9
8X8X4SC: RNCC: 5 | RNVC: 9
ESCB-884GK: RNCC: 5 | RNVC: 9

26 Jul 1975

5975-01-006-5517
Electrical Equipment Cabinet

010065517
CU-622-A: RNCC: 3 | RNVC: 2
CU-622: RNCC: 5 | RNVC: 9
736-3612: RNCC: 5 | RNVC: 9

18 Jul 1975

5975-01-005-9489
Electrical-Electronic Equipment Chassis

010059489
332161: RNCC: 3 | RNVC: 2
332161: RNCC: 3 | RNVC: 9
332161: RNCC: 5 | RNVC: 2
332161: RNCC: 5 | RNVC: 9

13 Jul 1975

5975-01-005-7582
Strain Electrical Conductor Clamp

010057582
203432-1: RNCC: 3 | RNVC: 2

4 Jul 1975

5975-01-005-5102
Electrical-Electronic Equipment Chassis

010055102
332181: RNCC: 3 | RNVC: 2
332181: RNCC: C | RNVC: 1

25 Jun 1975

5975-01-004-5251
Blank Panel

010045251
BACP10U0225B: RNCC: 3 | RNVC: 2

10 Jun 1975

5975-01-004-1988
Electrical Entrance Cap

010041988
SH-101: RNCC: 3 | RNVC: 2
1251: RNCC: 5 | RNVC: 9
25100: RNCC: 5 | RNVC: 9
ECO-100: RNCC: 5 | RNVC: 9

29 May 1975

5975-01-004-1535
Electrical Box Connector

010041535
5259: RNCC: 3 | RNVC: 2
5259: RNCC: 5 | RNVC: 9
4Q-9300: RNCC: 5 | RNVC: 9
ST-90300: RNCC: 5 | RNVC: 9
2-300: RNCC: 5 | RNVC: 9
LT-30090: RNCC: 5 | RNVC: 9
12-300: RNCC: 5 | RNVC: 9

26 May 1975

5975-01-004-1143
Electrical Equipment Drawer

010041143
SD-1407-4493: RNCC: 3 | RNVC: 9
DD-1980: RNCC: 5 | RNVC: 2

22 May 1975

5975-01-004-0955
Conduit Hub

010040955
B125: RNCC: 3 | RNVC: 2
B125: RNCC: 5 | RNVC: 2

21 May 1975

5975-01-003-5258
Junction Box Seal

010035258
65550-11011-105: RNCC: 3 | RNVC: 2
65550-11011-105: RNCC: 8 | RNVC: 2

28 Apr 1975

5975-01-003-4896
Electrical Wall Plate

010034896
S992: RNCC: 3 | RNVC: 2

25 Apr 1975

5975-00-999-9388
Bridle Ring

009999388
SC-B-441873: RNCC: 3 | RNVC: 2

1 Apr 1966

5975-00-999-7420
Cast A Junction Box

009997420
804011: RNCC: 3 | RNVC: 2
804011: RNCC: 5 | RNVC: 2
SMD414989: RNCC: D | RNVC: 9

16 Mar 1966

5975-00-999-3017
Junction Box Cover

009993017
523337: RNCC: 3 | RNVC: 2
545777: RNCC: 3 | RNVC: 9
545777: RNCC: 5 | RNVC: 9
HD11491-2: RNCC: 5 | RNVC: 9
545777: RNCC: C | RNVC: 1

14 Mar 1966

5975-00-998-9517
Electrical Conduit Adapter

009989517
RE21SA: RNCC: 3 | RNVC: 2
RE21SA: RNCC: 3 | RNVC: 9
RB75-50A: RNCC: 5 | RNVC: 1
45267-213: RNCC: 5 | RNVC: 9
RE21SA: RNCC: 5 | RNVC: 9
42593-213: RNCC: C | RNVC: 1

6 Dec 1967

5975-00-998-1358
Cabl Mounting Plate

009981358
660623: RNCC: 3 | RNVC: 2

16 Nov 1966

5975-00-997-4766
Interconnecting Box

009974766
757-1537-002: RNCC: 3 | RNVC: 2

8 Nov 1966

5975-00-997-3301
Beam Anchor Clamp

009973301
P2676: RNCC: 3 | RNVC: 2
B-751: RNCC: 5 | RNVC: 2

11 Apr 1967

5975-00-996-9153
Blank Panel

009969153
9084835: RNCC: 3 | RNVC: 2

6 Apr 1967

5975-00-995-5697
Electrical Box Connector

009955697
9995496: RNCC: 3 | RNVC: 2
NC490: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-995-2854
Electrical Conduit Adapter

009952854
E1110-355-13: RNCC: 3 | RNVC: 2
738761-08: RNCC: 7 | RNVC: 2

8 Apr 1967

5975-00-994-5645
Blank Panel

009945645
204-075-266-35: RNCC: 3 | RNVC: 2
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 2

30 Mar 1967

5975-00-994-5648
Blank Panel

009945648
204-075-266-045: RNCC: 3 | RNVC: 2
204-075-266-45: RNCC: 5 | RNVC: 9

30 Mar 1967

5975-00-993-9779
Electrical Equipment Cabinet

009939779
CR1743MG: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-993-1117
Conduit Outlet

009931117
GUAX47: RNCC: 3 | RNVC: 2
GRX125: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-992-8375
Chassis Base

009928375
51869: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-992-5333
Electrical Equipment Mounting Base

009925333
G6775-022-01: RNCC: 3 | RNVC: 2
MT-2840/APN-153(V): RNCC: 5 | RNVC: 2
G6775-022: RNCC: 5 | RNVC: 9
G6775-022-01: RNCC: 5 | RNVC: 9
G6775-022: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-992-3589
Splice Valve

009923589
P-1B: RNCC: 3 | RNVC: 9
P1: RNCC: 5 | RNVC: 9
P-1B: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-989-7416
Electrical Conduit Elbow

009897416
EL69: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-988-8689
Conduit Outlet

009888689
GUAT49: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-987-5352
Junction Box

009875352
5438-1: RNCC: 3 | RNVC: 2
BJ4F: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-986-6186
Electrical Equipment Rack

009866186
FR 127A: RNCC: 3 | RNVC: 2
FR127A: RNCC: 5 | RNVC: 2
4650: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-984-5793
Electrical Conductor Bushing

009845793
5M13-32: RNCC: 3 | RNVC: 2

26 Oct 1966

5975-00-984-4317
Metallic Raceway

009844317
LD62: RNCC: 3 | RNVC: 2
LD62: RNCC: 5 | RNVC: 9

24 Oct 1966

5975-00-984-3048
Electrical Box Connector

009843048
CT5301: RNCC: 3 | RNVC: 2
P100174: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-982-7461
Raceway End Fitting

009827461
G-3018AE: RNCC: 3 | RNVC: 2
3018A: RNCC: 5 | RNVC: 9
3018AE: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-982-2297
Conduit Outlet Cover

009822297
DS1282: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-981-0365
Electrical Conduit Ferrule

009810365
8724266: RNCC: 3 | RNVC: 2
8724226: RNCC: 5 | RNVC: 2
10-90290-114: RNCC: 5 | RNVC: 2
10-90290-114: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-979-6528
Wire Clip

009796528
3000WC: RNCC: 3 | RNVC: 2
SC-C-681537: RNCC: D | RNVC: 9

1 Jan 1962

5975-00-978-5224
Plate Closing

009785224
LD2CP: RNCC: 3 | RNVC: 2
LD2CP: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-00-978-5221
Connector

009785221
LD2C: RNCC: 3 | RNVC: 2
11253170-2: RNCC: 5 | RNVC: 2
LD2C: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-00-978-5225
Wireway Tee

009785225
LD-2T: RNCC: 3 | RNVC: 2
LD-2T: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-00-978-2291
Rigid Metal Conduit

009782291
204-070-037-5: RNCC: 3 | RNVC: 2
204-070-037-005: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-976-4848
Electrical Wall Plate

009764848
3391: RNCC: 3 | RNVC: 2
94229: RNCC: 5 | RNVC: 2

12 Oct 1966

5975-00-976-4262
Electrical Equipment Shelf

009764262
P-HD-SL-BS-2419: RNCC: 3 | RNVC: 2
DEE051475-4262-4: RNCC: 5 | RNVC: 2
BS2419: RNCC: 5 | RNVC: 9

12 Oct 1966

5975-00-975-4665
Blank Panel

009754665
PA1112HG: RNCC: 3 | RNVC: 2
PA1112MG: RNCC: 3 | RNVC: 9
6686LH: RNCC: 5 | RNVC: 2
CP-001-90-122: RNCC: 5 | RNVC: 2
AL112: RNCC: 5 | RNVC: 2
PA1112LG: RNCC: 5 | RNVC: 9
H6686: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-975-0930
Conduit Outlet

009750930
AA50563-207ACCCC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSC1-100: RNCC: 5 | RNVC: 1
FSC3: RNCC: 5 | RNVC: 1
FSC-100: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-975-0919
Conduit Outlet

009750919
GRN50: RNCC: 3 | RNVC: 2
GUAN16: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-975-0922
Conduit Outlet

009750922
GUAT47: RNCC: 3 | RNVC: 2
GRT125: RNCC: 5 | RNVC: 2
VTT44404: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-973-9568
Electrical Conduit Bushing

009739568
B-300: RNCC: 3 | RNVC: 9
B300: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-972-8028
Ground Rod

009728028
D9576-53-2: RNCC: 3 | RNVC: 2
D9576-53-2: RNCC: 5 | RNVC: 2
9576-53-2: RNCC: 5 | RNVC: 2
9576-53-2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-971-8840
Electrical-Electronic Equipment Chassis

009718840
CU3015A: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-971-0319
Blank Panel

009710319
170056: RNCC: 3 | RNVC: 9
170056: RNCC: 5 | RNVC: 9
170056: RNCC: 5 | RNVC: 9

25 Sep 1966

5975-00-968-3306
Conduit Outlet

009683306
FDA1: RNCC: 3 | RNVC: 2
FDA-1-50: RNCC: 5 | RNVC: 9
FDA-1-50: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-968-3286
Conduit Outlet

009683286
LBD8800: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-967-9877
Internal Raceway Elbow

009679877
5711LH: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-965-8996
Blank Panel

009658996
549-3790-003: RNCC: 3 | RNVC: 2
549-3790-003: RNCC: 5 | RNVC: 1
549-3790-003: RNCC: 5 | RNVC: 2

6 Jun 1966

5975-00-965-8998
Blank Panel

009658998
549-3791-003: RNCC: 3 | RNVC: 2
549-3791-003: RNCC: 5 | RNVC: 2

6 Jun 1966

5975-00-965-8982
Blank Panel

009658982
757-0477-001: RNCC: 3 | RNVC: 2
757-0477-001: RNCC: 5 | RNVC: 2
757-0477-001: RNCC: 5 | RNVC: 9

6 Jun 1966

5975-00-964-6673
Adapter Floor Duct

009646673
1126A1: RNCC: 3 | RNVC: 9

27 May 1966

5975-00-964-3400
Blank Panel

009643400
544-8558-002: RNCC: 3 | RNVC: 2

3 Jun 1966

5975-00-964-3036
Electrical Entrance Cap

009643036
F50: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-961-5206
Junction Box

009615206
G3028: RNCC: 3 | RNVC: 2
7716C17H01: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-935-2163
Electrical Conductor Bushing

009352163
SB1093-15: RNCC: 3 | RNVC: 2
655636: RNCC: 5 | RNVC: 9
077-003712-042: RNCC: 7 | RNVC: 2

3 Apr 1968

5975-00-892-9879
Conduit Outlet

008929879
AA50563-101ALLBF: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9
AA50563-1-1-XX-LB-2.00: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-892-9880
Conduit Outlet

008929880
AA50563-101ALLRA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-892-9868
Conduit Outlet

008929868
A-A-50563: RNCC: 4 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-880-3142
Blank Panel

008803142
PA1107BT, MG, OR WH: RNCC: 3 | RNVC: 2
ARP-1219: RNCC: 3 | RNVC: 2
PWHA-16: RNCC: 5 | RNVC: 1
6681LH: RNCC: 5 | RNVC: 2
PA1107HG: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-832-6887
Electrical Equipment Mounting Base

008326887
SC-D-595513: RNCC: 3 | RNVC: 2
MT-3874/V: RNCC: 5 | RNVC: 2
DL-SC-B-595512: RNCC: 5 | RNVC: 2
SC-D-446171: RNCC: 5 | RNVC: 9

13 Mar 1967

5975-00-804-1489
Conduit Outlet Cover

008041489
LD4CP: RNCC: 3 | RNVC: 2
LD4CP: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-803-0160
Switch Terminal Cover

008030160
5PA3: RNCC: 3 | RNVC: 2
7459794P1: RNCC: 5 | RNVC: 2
7459794P1: RNCC: 5 | RNVC: 2
5PA3: RNCC: 5 | RNVC: 2
5PA3: RNCC: 5 | RNVC: 2
131-1-175: RNCC: 5 | RNVC: 9
5PA3: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-781-9812
Junction Box

007819812
58371V1/2-25: RNCC: 3 | RNVC: 2
9009992501: RNCC: 5 | RNVC: 2
104FB: RNCC: 5 | RNVC: 2
202A: RNCC: 5 | RNVC: 2
58371V1-2: RNCC: 5 | RNVC: 9
678: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-701-5266
Cable Clamp

007015266
7C1-12: RNCC: 3 | RNVC: 2
7C1-12: RNCC: 5 | RNVC: 1
711698-005: RNCC: 5 | RNVC: 1
GC500BD12: RNCC: 7 | RNVC: 1

1 Jan 1963

5975-00-685-9545
Blank Panel

006859545
PS1251MG: RNCC: 3 | RNVC: 2
74B10067S: RNCC: 3 | RNVC: 2
101200-3: RNCC: 5 | RNVC: 2
PS1251HG: RNCC: 5 | RNVC: 9
RI-013-023: RNCC: 5 | RNVC: 9
PS-1251 LG: RNCC: 5 | RNVC: 9
9002-006 SIZE B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-682-0560
Electrical Wall Plate

006820560
ANSI UL514A: RNCC: 3 | RNVC: 1
W-P-455: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-4725
Raceway U Bushing

006814725
502: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-0991
Electrical-Electronic Equipment Chassis

006810991
AC-420: RNCC: 3 | RNVC: 2
9002-440: RNCC: 5 | RNVC: 9
CB773: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-9471
Electrical Box Connector

006699471
RSR-110: RNCC: 3 | RNVC: 2
DB-10: RNCC: 3 | RNVC: 2
7106754P4: RNCC: 3 | RNVC: 2
ZX-10: RNCC: 5 | RNVC: 9
13213E4405-5: RNCC: 7 | RNVC: 2
CM-1210: RNCC: E | RNVC: 8
RCG110: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-665-3158
Electrical Conduit Coupling

006653158
AA50553-1-2-K-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-581-8122
Junction Box

005818122
AA59214-4C12: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
LC0W: RNCC: 5 | RNVC: 1
388: RNCC: 5 | RNVC: 1
230LC: RNCC: 5 | RNVC: 1
471: RNCC: 5 | RNVC: 9
WJ800: RNCC: 5 | RNVC: 9
4S: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-538-5115
Electrical Equipment Cabinet

005385115
CY597AG: RNCC: 3 | RNVC: 2
0100040: RNCC: 5 | RNVC: 1
N16C10639-2872: RNCC: 5 | RNVC: 2
RE23J250G: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-536-3993
Raceway Coupling

005363993
5701: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-0187
Junction Box

005180187
5747-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-410-6172
Stuffing Tube Plug

004106172
M24231/28-002: RNCC: 4 | RNVC: 1
MIL-C-24231/28-002: RNCC: 4 | RNVC: 1
9000S6202-73980-51043A: RNCC: 5 | RNVC: 1
9000S6202-73980-51043AL1: RNCC: 5 | RNVC: 2
MIL-C-24231/28-002L1: RNCC: 5 | RNVC: 2

20 Aug 1969

5975-00-393-1269
Clamp Assembly

003931269
S0C60471: RNCC: 3 | RNVC: 2
S0C60471: RNCC: 3 | RNVC: 9
S0C66471: RNCC: 5 | RNVC: 9
S0C66471: RNCC: 5 | RNVC: 9
S0C66471: RNCC: 5 | RNVC: 9
SC-C-66471: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-1839
Electrical-Electronic Equipment Chassis

003701839
152538: RNCC: 3 | RNVC: 2
152538: RNCC: 5 | RNVC: 9
152538: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-370-1515
Chassis Base

003701515
152575: RNCC: 3 | RNVC: 9
152575: RNCC: 5 | RNVC: 2
152575: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-355-4754
Stuffing Tube Plug

003554754
9000S6202F73937SIZEK: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-340-2697
Lacing Tape

003402697
26HBLACK: RNCC: 3 | RNVC: 9
26HBLACK: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-339-0948
Deadend Clamp

003390948
5152: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-339-0947
Deadend Clamp

003390947
5151: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-337-0448
Conduit Outlet

003370448
AA50563-207ASSSA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSS1: RNCC: 5 | RNVC: 1
6176663: RNCC: 5 | RNVC: 1
675072: RNCC: 5 | RNVC: 9
FSS-50: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-335-2588
Flexible Nonmetallic Conduit

003352588
UL 3 SIZE 1/4: RNCC: 3 | RNVC: 2
LOOM 1/4 ID: RNCC: 3 | RNVC: 9
06174AB: RNCC: 5 | RNVC: 9
HHT791: RNCC: 5 | RNVC: 9
8376125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-329-4443
Pipe Connector

003294443
5782: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-325-9032
Electrical Equipment Mounting Base

003259032
MT1719AR: RNCC: 3 | RNVC: 2
505-2782-002: RNCC: 5 | RNVC: 2
350D3: RNCC: 5 | RNVC: 9
505-2782-002: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-325-1816
Blank Panel

003251816
154439: RNCC: 3 | RNVC: 2
154439: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-325-1814
Blank Panel

003251814
154437: RNCC: 3 | RNVC: 2
55080308-000: RNCC: 5 | RNVC: 9
154437: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-325-1781
Plate

003251781
153602: RNCC: 3 | RNVC: 2
153602: RNCC: 5 | RNVC: 9
153602: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-322-8480
Flat Elbow

003228480
211: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-319-5034
Junction Box Extension

003195034
V5747: RNCC: 3 | RNVC: 2
5747: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-319-5033
Junction Box Extension

003195033
5751: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-319-0698
Electrical Cable Protector

003190698
751-332-004-603: RNCC: 3 | RNVC: 2
12869: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-317-4782
Blank End Fitting

003174782
2110B: RNCC: 3 | RNVC: 2
10044616: RNCC: D | RNVC: 9
0099-3-3039: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-296-6991
Conduit Outlet

002966991
AA50563-101ALLBJ: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LB97: RNCC: 5 | RNVC: 1
LB350-M: RNCC: 5 | RNVC: 1
LB69: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
15708: RNCC: 5 | RNVC: 9
480-112-M: RNCC: 5 | RNVC: 9
LB-350G: RNCC: 5 | RNVC: 9
70-353: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-7009
Flexible Metal Conduit

002967009
MILC6136: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-296-6989
Raceway Box Connector

002966989
5781: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-4577
Junction Box

002964577
5748-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-4100
Stuffing Tube

002964100
F1836M TYPE-3-010: RNCC: 3 | RNVC: 9
F1836M: RNCC: 5 | RNVC: 1
TYPE-1-010: RNCC: 5 | RNVC: 2
MILS19622-1: RNCC: 5 | RNVC: 9
M19622-1-010: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-3079
Electrical Box Connector

002963079
AN3061-12: RNCC: 2 | RNVC: 2
AN3061-12: RNCC: 5 | RNVC: 1
148-12: RNCC: 5 | RNVC: 1
22-12-12: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-296-1600
Electrical Box Connector

002961600
RSR-1007: RNCC: 3 | RNVC: 2
DB-3: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-0537
Electrical Conduit Locknut

002960537
AN3066-28: RNCC: 2 | RNVC: 2
AN3066: RNCC: 4 | RNVC: 1
789802P10: RNCC: 5 | RNVC: 1
AN3066-28: RNCC: 5 | RNVC: 1
6-2-28: RNCC: 5 | RNVC: 1
6-2-28: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-9868
Electrical Conduit Coupling Nut

002959868
10-40458-10S: RNCC: 3 | RNVC: 2
6730405: RNCC: 5 | RNVC: 2
6730405: RNCC: 5 | RNVC: 2
10-37669: RNCC: E | RNVC: 8
10-37669: RNCC: E | RNVC: 8
10-37669: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-295-8715
Strain Electrical Conductor Clamp

002958715
PR1: RNCC: 3 | RNVC: 9
AT7408: RNCC: 5 | RNVC: 9
AT7408: RNCC: 5 | RNVC: 9
PR6: RNCC: 5 | RNVC: 9
PRS6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-8713
Electrical Conduit Nipple

002958713
ANSI UL6: RNCC: 3 | RNVC: 1
1-2X1 1-2INLGSH0RT: RNCC: 3 | RNVC: 9
UL STD UL-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-292-3250
Conduit Outlet

002923250
JBDX50L: RNCC: 3 | RNVC: 2
WC586: RNCC: 5 | RNVC: 9

19 Sep 1973

5975-00-285-6079
Flexible Metal Conduit

002856079
175-0500: RNCC: 3 | RNVC: 2
A-A-52440-1B-5: RNCC: 4 | RNVC: 1
MIL-C-13909: RNCC: 5 | RNVC: 9
175-0500: RNCC: 5 | RNVC: 9

9 Sep 1973

5975-00-285-0454
Electrical Conduit Nipple

002850454
ANSI UL6A: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
UL STD 6A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-7340
Flexible Nonmetallic Conduit

002847340
ANSI UL3: RNCC: 3 | RNVC: 1
1480FX59: RNCC: 5 | RNVC: 2
HHT791: RNCC: 5 | RNVC: 9
UL 3: RNCC: 5 | RNVC: 9
1480FX59: RNCC: 5 | RNVC: 9
LOOM 3/4 ID: RNCC: 5 | RNVC: 9
LOOM 3/4 ID: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-7339
Flexible Nonmetallic Conduit

002847339
ANSI UL3: RNCC: 3 | RNVC: 1
UL 3 SIZE 1/2: RNCC: 3 | RNVC: 2
R1-593: RNCC: 3 | RNVC: 9
LOOM 1/2 ID: RNCC: 5 | RNVC: 9
HHT791A: RNCC: 5 | RNVC: 9
FLEXTUBE1-2: RNCC: 5 | RNVC: 9
HHT791: RNCC: 5 | RNVC: 9
R1-593: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-284-6370
Electrical Cable Nipple

002846370
166-105: RNCC: 3 | RNVC: 2
166B105: RNCC: 3 | RNVC: 2
0100113: RNCC: 3 | RNVC: 2
YD12: RNCC: 3 | RNVC: 2
02YD12: RNCC: 5 | RNVC: 9
471361: RNCC: 5 | RNVC: 9
609086: RNCC: 5 | RNVC: 9
066424: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6285
Junction Box Cover

002846285
473: RNCC: 3 | RNVC: 2
128TYPE8SIZEUSTYLE53: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6099
Electrical Conduit Adapter

002846099
AN3055-32-20: RNCC: 2 | RNVC: 2
AN3055-32-20: RNCC: 5 | RNVC: 1
276-1106P50: RNCC: 5 | RNVC: 1
2360-069010-10-0: RNCC: 5 | RNVC: 2
2360-069010-10-0: RNCC: 5 | RNVC: 2
AN3055-32-20: RNCC: 5 | RNVC: 2
2360-069010-10-0: RNCC: 5 | RNVC: 2
AN3055-32-20: RNCC: 5 | RNVC: 9
AN3055-32-20: RNCC: 5 | RNVC: 9
276-1106P50: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-281-0055
Junction Box Cover

002810055
AA59214-8B8: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
8409: RNCC: 5 | RNVC: 1
54C48: RNCC: 5 | RNVC: 9
FEDSTD128: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9182
Knockout Reducing Washer

002809182
8168659: RNCC: 3 | RNVC: 2
3713: RNCC: 5 | RNVC: 2
13409: RNCC: 5 | RNVC: 9
1454-D: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-8570
Electrical Conduit Union

002808570
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-8478
Electrical Conduit Coupling

002808478
XK241: RNCC: 3 | RNVC: 2
530-DC: RNCC: 5 | RNVC: 9
676: RNCC: 5 | RNVC: 9
GX-50: RNCC: 5 | RNVC: 9

25 Aug 1973

5975-00-280-7543
Electrical Cable Nipple

002807543
13 RED AND BLACK: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-6039
Electrical Wall Plate

002806039
94072: RNCC: 3 | RNVC: 2
PD40-526: RNCC: 5 | RNVC: 9
PD40-526: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-5768
Electrical Conduit Ferrule

002805768
AN3051-6: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-280-4313
Electrical Conduit Adapter

002804313
AN3056-8: RNCC: 2 | RNVC: 2
AN3056-8: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-280-4121
Junction Box

002804121
A-A-59214-2B10: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
537020-1: RNCC: 5 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3974
Blank Panel

002803974
B6867GP3: RNCC: 3 | RNVC: 9
B6867GR3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3748
Electrical Entrance Cap

002803748
AA50563-627BG: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE VI DESIGN 27 FORM2 2 1/2IN: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3751
Electrical Entrance Cap

002803751
FB-707: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-3509
Wire Strand Hanger

002803509
MS39051: RNCC: 2 | RNVC: 2
8902: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3508
Wire Strand Hanger

002803508
5063: RNCC: 3 | RNVC: 2
DJ2C7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-3380
Electrical Box Connector

002803380
7288V: RNCC: 3 | RNVC: 2
8409556: RNCC: 5 | RNVC: 9
KC-51: RNCC: 5 | RNVC: 9
406: RNCC: 5 | RNVC: 9
10051676: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3211
Electrical Conduit Nipple

002803211
UL 514B: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
16224: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-280-3198
Electrical Conduit Nipple

002803198
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3197
Electrical Conduit Nipple

002803197
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
1184: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-280-3194
Electrical Conduit Nipple

002803194
ANSI UL6: RNCC: 3 | RNVC: 1
LS35066-04-16: RNCC: 3 | RNVC: 2
16243: RNCC: 5 | RNVC: 1
LS35066-04-16: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9
1-2X2INLGCL0SE: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-266-1986
Electrical Conduit Ferrule

002661986
AN3050-4: RNCC: 2 | RNVC: 2
AN3050: RNCC: 4 | RNVC: 1
213018-2: RNCC: 5 | RNVC: 9
7501-485757PC39: RNCC: 5 | RNVC: 9
11-0250P: RNCC: 5 | RNVC: 9
11-1-4: RNCC: 5 | RNVC: 9
11-0250P: RNCC: 5 | RNVC: 9
11-1-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-266-2029
Electrical Conduit Ferrule

002662029
AN3052-6: RNCC: 2 | RNVC: 2
S1110752-6: RNCC: 5 | RNVC: 1
11-3-6: RNCC: 5 | RNVC: 1
S1110752-6: RNCC: 5 | RNVC: 9
11-3-6: RNCC: 5 | RNVC: 9
6005-9570-9: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-265-7494
Conduit Outlet

002657494
GUAT24: RNCC: 3 | RNVC: 2
GRJT75: RNCC: 5 | RNVC: 2
ST41D9-13: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-265-7491
Conduit Outlet

002657491
AA50563-520ACCCB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
GUAC26: RNCC: 5 | RNVC: 1
TYPE V DESIGN 20 STYLE C: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
TYPE V DESIGN 23 STYLE C: RNCC: E | RNVC: 8
GUFC26: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-265-0661
External Raceway Elbow

002650661
718: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-265-0236
Internal Raceway Elbow

002650236
V518: RNCC: 3 | RNVC: 2
518: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-265-0237
Flat Raceway Elbow

002650237
V511: RNCC: 3 | RNVC: 2
511: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-265-0235
Internal Raceway Elbow

002650235
717: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-265-0021
Electrical Equipment Cabinet

002650021
3800: RNCC: 3 | RNVC: 2
C1798: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-264-5667
Clip Cable

002645667
712: RNCC: 3 | RNVC: 9
712: RNCC: 5 | RNVC: 9

4 Jul 1973

NSN 5975-00-263-1082 002631082 HOLDER,POLE STEP

5975-00-263-1082
Pole Step Holder

002631082
7235: RNCC: 3 | RNVC: 2
7235: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-262-9155
Crossarm Brace

002629155
MS39030-2: RNCC: 2 | RNVC: 2
MILH55053: RNCC: 5 | RNVC: 9
8028: RNCC: 5 | RNVC: 9
8028: RNCC: 5 | RNVC: 9
7028: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-255-6095
Cable Spacer

002556095
AT7640: RNCC: 3 | RNVC: 2
AT7640: RNCC: 3 | RNVC: 9
AT7396B: RNCC: 5 | RNVC: 2
A7396B: RNCC: 5 | RNVC: 9
AT7396B: RNCC: 5 | RNVC: 9
AT7640: RNCC: 5 | RNVC: 9
AT7396B: RNCC: 5 | RNVC: 9
AT7640D: RNCC: 5 | RNVC: 9
AT7640D: RNCC: 5 | RNVC: 9
6908: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-255-2187
Electrical Box Connector

002552187
CG100125: RNCC: 3 | RNVC: 2
DB-14118-L: RNCC: E | RNVC: 8
327767-45: RNCC: E | RNVC: 8
327767-45: RNCC: E | RNVC: 8

24 Jun 1973

5975-00-253-9743
Blank Panel

002539743
SCC83370: RNCC: 3 | RNVC: 2
PA3106HG: RNCC: E | RNVC: 8
T19-101532-187: RNCC: E | RNVC: 8
9A3226: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-252-0197
Electrical Box Connector

002520197
STA1: RNCC: 3 | RNVC: 9
41E7A1-2: RNCC: 5 | RNVC: 2
STA1: RNCC: 5 | RNVC: 9
D46B: RNCC: 5 | RNVC: 9
STA1: RNCC: C | RNVC: 1

28 Feb 1969

5975-00-250-6763
Electrical Conduit Ferrule

002506763
AN3051-3: RNCC: 3 | RNVC: 2
AN3051-3: RNCC: 5 | RNVC: 2
B47A30: RNCC: 5 | RNVC: 2
11-2-3: RNCC: 5 | RNVC: 2
6026-1025-13: RNCC: 5 | RNVC: 9
6026-1040-5: RNCC: 5 | RNVC: 9
11-2-3: RNCC: 5 | RNVC: 9
6005-1564-6: RNCC: 5 | RNVC: 9
6005-4702-14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-249-7878
Electrical Conduit Nipple

002497878
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
WWC581B: RNCC: 5 | RNVC: 9
1-2X6INLG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-249-6798
Ground Rod

002496798
8976942: RNCC: 3 | RNVC: 2
04271-0519: RNCC: 5 | RNVC: 1
MIL-R-11461: RNCC: 5 | RNVC: 9
MILR11461: RNCC: 5 | RNVC: 9
5975002496798: RNCC: 5 | RNVC: 9
04271-0519: RNCC: 5 | RNVC: 9
5975002496798: RNCC: 6 | RNVC: 9

19 Feb 1969

5975-00-248-8565
Strain Electrical Conductor Clamp

002488565
21LD: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-248-8533
Strain Electrical Conductor Clamp

002488533
41LD: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-248-5319
Insulator Bracket

002485319
J1300: RNCC: 3 | RNVC: 2
J1300: RNCC: 5 | RNVC: 9

15 Jun 1973

5975-00-248-2559
Junction Box

002482559
1542D: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-245-9575
Electrical Wall Plate

002459575
NP12: RNCC: 3 | RNVC: 2
91181: RNCC: 5 | RNVC: 2
P12X: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1692
Conduit Outlet

002451692
AA50563-101ACCCD: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
C125M: RNCC: 5 | RNVC: 1
C47: RNCC: 5 | RNVC: 1
TYPE I DESIGN 1 STYLE C (1 1/4IN: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1734
Conduit Outlet

002451734
AA50563-207BEEEA: RNCC: 2 | RNVC: 2
FS-2-50: RNCC: 5 | RNVC: 1
FS-2-50: RNCC: 5 | RNVC: 9
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1718
Conduit Outlet

002451718
AA50563-101ATBBB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE 1 DESIGN 1 STYLE TB: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1730
Conduit Outlet

002451730
AA50563-207ALLLA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSL1: RNCC: 5 | RNVC: 1
FSL-1-50: RNCC: 5 | RNVC: 1
TYPE II DESIGN 7 FORM STYLE LL: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
FSL-50: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1715
Conduit Outlet

002451715
AA50563-207AAAAA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSA-1-50: RNCC: 5 | RNVC: 1
FSA1: RNCC: 5 | RNVC: 1
8192127: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
FSA-50: RNCC: 5 | RNVC: 9
TYPE II DESIGN 7 FORM 1 STYLE A: RNCC: 5 | RNVC: 9
FSA1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1682
Conduit Outlet

002451682
AA50563-208AEEEA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE II DESIGN 8 STYLE E FORM 1: RNCC: 5 | RNVC: 9
FD1: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-243-3256
Electrical Conduit Adapter

002433256
AN3055-32-16: RNCC: 2 | RNVC: 2
00005-0001: RNCC: 5 | RNVC: 1
00005-0001: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-6427
Electrical Conduit Adapter

002426427
AN3055-14-4: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-242-4627
Fanning Strip

002424627
S572102: RNCC: 3 | RNVC: 9
812: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-4620
Fanning Strip

002424620
S572100: RNCC: 3 | RNVC: 9
810: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-4276
Conduit Outlet

002424276
AA50563-520LAAC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
GUAL36: RNCC: 5 | RNVC: 1
ST41D9-2: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
TYPE V DESIGN 20 STYLE L: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-241-6636
Electrical Cable Nipple

002416636
BU-26-0 BLACK: RNCC: 3 | RNVC: 2
BU-26-2 RED: RNCC: 3 | RNVC: 2

9 Jun 1973

5975-00-241-4127
Flexible Metal Conduit

002414127
MILC6136: RNCC: 4 | RNVC: 1
TYPE2SIZE3-16IN: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-241-4126
Flexible Metal Conduit

002414126
MILC6136: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-240-2763
Conduit Outlet

002402763
AA50563-101AEEEA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
E50-M: RNCC: 5 | RNVC: 1
E17: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
E-50G: RNCC: 5 | RNVC: 9
TYPE 1 DESIGN 1 STYLE E: RNCC: 5 | RNVC: 9
E17: RNCC: 5 | RNVC: 9
70-52: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2757
Conduit Outlet

002402757
AA50563-101AEEEB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
E27: RNCC: 5 | RNVC: 1
E75-M: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE I DESIGN 1 STYLE E: RNCC: 5 | RNVC: 9
E27: RNCC: 5 | RNVC: 9
70-72: RNCC: 5 | RNVC: 9
E-75G: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2733
Flat Raceway Elbow

002402733
1511: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-240-2732
Internal Raceway Elbow

002402732
1517: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-234-5182
Electrical Conduit Bend

002345182
UL6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
MS75022-14: RNCC: 5 | RNVC: 9
WWC571AMEND2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-234-4868
Blank Panel

002344868
6635: RNCC: 3 | RNVC: 2
6605: RNCC: 5 | RNVC: 1
PS1255MG OR WH: RNCC: 5 | RNVC: 2
RI-013-063: RNCC: 5 | RNVC: 9
PS-1255: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-233-6234
Electrical Cable Protector

002336234
6531: RNCC: 3 | RNVC: 2
7531: RNCC: 5 | RNVC: 9
6531: RNCC: 5 | RNVC: 9
792: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-232-7645
Conduit Outlet

002327645
AA50563-101BLLBG: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LB777: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE 1 DESIGN 1 STYLE LB: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-226-6676
Electrical Cable Nipple

002266676
47: RNCC: 3 | RNVC: 1
8169301: RNCC: 5 | RNVC: 2
860-0093: RNCC: 5 | RNVC: 9
916B326-1: RNCC: 5 | RNVC: 9
916B326-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-225-5242
Conduit Chase Nipple

002255242
AA50553-3-1-T-1-06-C: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
WF408-31T106M: RNCC: 5 | RNVC: 9

11 Jan 1968

5975-00-224-4620
Blank Panel

002244620
H6606: RNCC: 3 | RNVC: 2
MX509CP: RNCC: 5 | RNVC: 2
PS1256MG OR WH: RNCC: 5 | RNVC: 2
PS1256LG: RNCC: 5 | RNVC: 9
PS1256HG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-9860
Underground Cable Rack

002239860
5B9026: RNCC: 3 | RNVC: 1
J5126: RNCC: 3 | RNVC: 2
5B9206: RNCC: 5 | RNVC: 9
2126: RNCC: 5 | RNVC: 9
1126: RNCC: 5 | RNVC: 9
619: RNCC: 5 | RNVC: 9
2126: RNCC: 5 | RNVC: 9
2126: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-1835
Cable Hanger

002231835
6693SIZE1: RNCC: 3 | RNVC: 9
6693SIZE1: RNCC: 5 | RNVC: 2
6693SIZE1: RNCC: 5 | RNVC: 9
1: RNCC: 5 | RNVC: 9
891: RNCC: 5 | RNVC: 9
6693SIZE1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-221-7175
Conduit Outlet

002217175
EABT26: RNCC: 3 | RNVC: 2

4 May 1973

NSN 5975-00-214-9066 002149066 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-214-9066
Electrical Components Tie Down Strap

002149066
TY46MF4: RNCC: 3 | RNVC: 2
TY46MF4: RNCC: 5 | RNVC: 2
347C212H61: RNCC: 5 | RNVC: 2
347C212H61: RNCC: 5 | RNVC: 9
TY46MF4: RNCC: 5 | RNVC: 9

27 Apr 1973

5975-00-213-2330
Electrical Equipment Rack

002132330
400-11: RNCC: 3 | RNVC: 2
TLC4900-11: RNCC: 5 | RNVC: 2
400-11: RNCC: 5 | RNVC: 2
40011: RNCC: 5 | RNVC: 9
B92-04011: RNCC: 5 | RNVC: 9
1011U: RNCC: 5 | RNVC: 9
1011TYPE10: RNCC: 5 | RNVC: 9
92-000011: RNCC: 5 | RNVC: 9
8611: RNCC: 5 | RNVC: 9

25 Apr 1973

5975-00-212-6244
Electrical Bonding Ring

002126244
AN3111-9: RNCC: 2 | RNVC: 2
8192703: RNCC: 5 | RNVC: 1
7611100PT63: RNCC: 5 | RNVC: 1
7614260PT25: RNCC: 5 | RNVC: 1
CA 2250-9: RNCC: 5 | RNVC: 1
813145-9: RNCC: 5 | RNVC: 1
2250-9: RNCC: 5 | RNVC: 9
AN3111-9: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-209-1418
Conduit Outlet Cover

002091418
690: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-208-6727
Conduit Outlet

002086727
LL29: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-201-6306
Electrical Conduit Coupling

002016306
7127253-01: RNCC: 3 | RNVC: 9

31 Mar 1973

5975-00-197-0207
Conduit Outlet Cover

001970207
FSK-1VTS: RNCC: 3 | RNVC: 2
DS128F: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-194-8856
Junction Box

001948856
12SB: RNCC: 3 | RNVC: 9
A-A-59214: RNCC: 4 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-194-8858
Junction Box

001948858
AA59214-IC8: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
561L: RNCC: 5 | RNVC: 1
128TYPE1SIZEBSTYLE4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-189-6023
Flexible Metal Conduit

001896023
BA10089-8: RNCC: 3 | RNVC: 2
177-0375: RNCC: 5 | RNVC: 2
177-0375: RNCC: 5 | RNVC: 9
B10089-8: RNCC: 5 | RNVC: 9
BA10089-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-189-0093
Electrical Cable Nipple

001890093
30397: RNCC: 3 | RNVC: 2
30397: RNCC: 3 | RNVC: 9

3 Mar 1971

5975-00-178-1213
Rigid Metal Conduit

001781213
UL STD-6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-177-8022
Metallic Raceway

001778022
LD63: RNCC: 3 | RNVC: 2
LD63: RNCC: 5 | RNVC: 9

18 Feb 1973

5975-00-177-2819
Electrical Conductor Bushing

001772819
2119: RNCC: 3 | RNVC: 2
1559AS299-1: RNCC: 5 | RNVC: 2
8612016-1: RNCC: 5 | RNVC: 2
150-0742-010: RNCC: 5 | RNVC: 9
UB875: RNCC: 5 | RNVC: 9

29 Oct 1969

5975-00-174-9125
Knockout Reducing Washer

001749125
3716: RNCC: 3 | RNVC: 2
3716: RNCC: 5 | RNVC: 1
CATAL0G3716: RNCC: 5 | RNVC: 9
13412: RNCC: 5 | RNVC: 9
1455-C: RNCC: 5 | RNVC: 9
RW200-100: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-171-1346
Electrical Tie Down Mounting Base

001711346
PM2H25M: RNCC: 3 | RNVC: 2
PM2H25M: RNCC: 5 | RNVC: 2
45003612-1: RNCC: 5 | RNVC: 9

27 Aug 1972

5975-00-168-8783
Ground Rod

001688783
GP2: RNCC: 3 | RNVC: 2
GP2: RNCC: 5 | RNVC: 9

27 Jan 1971

5975-00-167-2422
Electrical Conduit End Seal Cap

001672422
B075: RNCC: 3 | RNVC: 2
B075: RNCC: 5 | RNVC: 9

7 Feb 1973

5975-00-160-9222
Electrical Conduit Elbow

001609222
4291: RNCC: 3 | RNVC: 2
8-75IT: RNCC: 5 | RNVC: 9
182A-B: RNCC: 5 | RNVC: 9

3 Nov 1971

5975-00-158-8487
Conduit Outlet Cover

001588487
370: RNCC: 3 | RNVC: 2
BS-100: RNCC: 5 | RNVC: 9
SC-63: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-158-8485
Conduit Outlet Cover

001588485
670: RNCC: 3 | RNVC: 2
35080: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-156-3325
Insulator Bracket

001563325
468: RNCC: 3 | RNVC: 9
568: RNCC: 5 | RNVC: 9
568: RNCC: 5 | RNVC: 9

27 Mar 1970

5975-00-153-6386
Junction Box

001536386
AA59214-4A4: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9
FED-STD-128: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1137
Electrical Conduit Coupling

001521137
NEMA C80.1: RNCC: 3 | RNVC: 2
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-152-1112
Electrical Conduit Bend

001521112
ANSI UL6: RNCC: 3 | RNVC: 1
UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1129
Electrical Conduit Coupling

001521129
ANSI UL514C: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
BM11637-68: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-152-1113
Electrical Conduit Bushing

001521113
AA50553-31Q109S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
SP130: RNCC: 5 | RNVC: 1
BU350: RNCC: 5 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
416-112-M: RNCC: 5 | RNVC: 9
A-A-50553-III-I-Q-1-09-S: RNCC: 5 | RNVC: 9
11908: RNCC: 5 | RNVC: 9
FED-STD-156: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1105
Electrical Conduit Bend

001521105
MS75022-5: RNCC: 2 | RNVC: 2
ANSI UL6: RNCC: 5 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
ANSI UL514D: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1107
Electrical Conduit Bend

001521107
ANSI UL6: RNCC: 3 | RNVC: 1
MS75022-13: RNCC: 4 | RNVC: 1
WWC581CAMEND2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1076
Electrical Conduit Bend

001521076
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-148-7162
Electrical Wall Plate

001487162
P8W: RNCC: 3 | RNVC: 2
88101W: RNCC: 5 | RNVC: 2
8248WHI: RNCC: 5 | RNVC: 9
88003HG: RNCC: 5 | RNVC: 9

19 Jun 1974

5975-00-141-0546
Conduit Outlet

001410546
TWOLB-4: RNCC: 3 | RNVC: 2
LB49MT: RNCC: 5 | RNVC: 9
LB34: RNCC: 5 | RNVC: 9
LB-100SS: RNCC: 5 | RNVC: 9
15-123: RNCC: 5 | RNVC: 9
LB-49MT: RNCC: 5 | RNVC: 9
17503: RNCC: 5 | RNVC: 9
ELB-13: RNCC: 5 | RNVC: 9

17 Dec 1969

5975-00-141-0051
Conduit Outlet

001410051
LB29MT: RNCC: 3 | RNVC: 9
TWOLB-2: RNCC: 5 | RNVC: 2
LB29MT: RNCC: 5 | RNVC: 9
LB32: RNCC: 5 | RNVC: 9
15-73: RNCC: 5 | RNVC: 9
17501: RNCC: 5 | RNVC: 9
ELB-11: RNCC: 5 | RNVC: 9

17 Dec 1969

5975-00-140-7572
Electrical Tie Down Mounting Base

001407572
AM2C: RNCC: 3 | RNVC: 2

10 Sep 1971

5975-00-140-7301
Rigid Metal Conduit

001407301
SMC499041-7: RNCC: 3 | RNVC: 2
HM3064-18: RNCC: E | RNVC: 8

10 Sep 1971

5975-00-134-4930
Electrical Box Connector

001344930
7916113: RNCC: 3 | RNVC: 2
7916113: RNCC: 5 | RNVC: 2
SKD4850-3: RNCC: 5 | RNVC: 9

18 Aug 1969

5975-00-134-0397
Conduit Outlet Cover

001340397
10105424: RNCC: 3 | RNVC: 2
1B4BB: RNCC: 3 | RNVC: 2
94121: RNCC: 5 | RNVC: 2
94121: RNCC: 5 | RNVC: 2
81014: RNCC: 5 | RNVC: 9
B-14: RNCC: 5 | RNVC: 9
94121: RNCC: 5 | RNVC: 9

13 Dec 1968

5975-00-132-9475
Flexible Metal Conduit

001329475
A-A-52440-1B-4: RNCC: 2 | RNVC: 2
A-A-52440: RNCC: 4 | RNVC: 1
MILC13909: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-125-2347
Jack Strip

001252347
PJ724: RNCC: 3 | RNVC: 2
CN-J0152-001: RNCC: 5 | RNVC: 2

11 Nov 1968

5975-00-122-2356
Knockout Cover

001222356
12-0600-0075: RNCC: 3 | RNVC: 2
MP-0850520: RNCC: 5 | RNVC: 2
066-010561-005: RNCC: 5 | RNVC: 9
K0C3-4: RNCC: 5 | RNVC: 9
K0C075: RNCC: 5 | RNVC: 9

28 Oct 1968

5975-00-122-2359
Electrical Equipment Shelf

001222359
DL87-5136: RNCC: 3 | RNVC: 2
SA-B2343-2359: RNCC: 3 | RNVC: 2
SK2419: RNCC: 5 | RNVC: 2
9002-674: RNCC: 5 | RNVC: 9
DL2419RS: RNCC: 5 | RNVC: 9

28 Oct 1968

5975-00-114-9835
Junction Box Cover

001149835
8461: RNCC: 3 | RNVC: 2

24 Dec 1972

5975-00-114-5031
Housing

001145031
G6046KD: RNCC: 3 | RNVC: 2

24 Dec 1972

5975-00-114-0019
Electrical Equipment Mounting Base

001140019
547-1648-003: RNCC: 3 | RNVC: 2
547-1648-003: RNCC: 5 | RNVC: 2
547-1648-003: RNCC: 5 | RNVC: 2
SI-7991: RNCC: 5 | RNVC: 2

9 Sep 1968

5975-00-113-5257
Conduit Outlet Cover

001135257
490: RNCC: 3 | RNVC: 9
490: RNCC: 5 | RNVC: 2

6 Sep 1968

5975-00-113-5254
Conduit Outlet Cover

001135254
290: RNCC: 3 | RNVC: 2

6 Sep 1968

5975-00-113-3657
Gland Assembly

001133657
10-257921-123: RNCC: 3 | RNVC: 2

30 Aug 1968

5975-00-110-5887
Cable Hanger

001105887
343-0089-00: RNCC: 3 | RNVC: 2

9 Aug 1968

5975-00-108-6464
Junction Box

001086464
383: RNCC: 3 | RNVC: 2
105353-1: RNCC: 5 | RNVC: 2
440: RNCC: E | RNVC: 8
440: RNCC: E | RNVC: 8

17 Dec 1972

5975-00-107-8198
Cable Strain Relief Bushing

001078198
SR7K2: RNCC: 3 | RNVC: 2
SR7K2BLK: RNCC: C | RNVC: 1
568126-1: RNCC: C | RNVC: 1
1240: RNCC: E | RNVC: 8
38-2023-00: RNCC: E | RNVC: 8

24 Dec 1972

5975-00-106-4339
Conduit Outlet

001064339
FS12: RNCC: 3 | RNVC: 2
FS-2-50: RNCC: 5 | RNVC: 9

12 Jul 1968

5975-00-106-4320
Electrical-Electronic Equipment Chassis

001064320
CU3012A: RNCC: 3 | RNVC: 9

26 Jul 1968

5975-00-101-5487
Electrical Equipment Leg

001015487
10044352: RNCC: 3 | RNVC: 2

5 Jun 1968

5975-00-098-5130
Gear Clamp

000985130
503-4750-001: RNCC: 3 | RNVC: 2
AD0315890: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-097-8512
Electrical Wall Plate

000978512
SS11: RNCC: 3 | RNVC: 2
93181: RNCC: 5 | RNVC: 9
93181: RNCC: 5 | RNVC: 9
97181: RNCC: 5 | RNVC: 9

24 May 1968

5975-00-097-8116
Electrical Conduit Union

000978116
AA50553-2-1-G-1-10-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9
AA-50553-II-A-G: RNCC: 5 | RNVC: 9
AA50553-2-1-G-10-S: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8112
Electrical Conduit Union

000978112
AA50553-2-1-G-1-06-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9
680: RNCC: E | RNVC: 8

29 May 1968

5975-00-097-8115
Electrical Conduit Union

000978115
AA50553-II-1-G-09-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8114
Electrical Conduit Union

000978114
AA50553-2-1-G-1-08-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8113
Electrical Conduit Union

000978113
AA50553-2-1-G-1-07-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8110
Electrical Conduit Union

000978110
AA50553-II-1-G-04-C: RNCC: 2 | RNVC: 2
AA50553A: RNCC: 4 | RNVC: 1
678: RNCC: 5 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9
EC125: RNCC: E | RNVC: 8
13703: RNCC: E | RNVC: 8
273-S: RNCC: E | RNVC: 8
4-125: RNCC: E | RNVC: 8

29 May 1968

5975-00-096-2665
Flexible Metal Conduit Assembly

000962665
ECLK118: RNCC: 3 | RNVC: 2
ECLK-50-18: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-094-5959
Rigid Metal Conduit Assembly

000945959
14-28739-21: RNCC: 3 | RNVC: 9

6 Dec 1972

5975-00-092-4425
Electrical Equipment Shelf

000924425
GA468: RNCC: 3 | RNVC: 9

3 Dec 1972

5975-00-091-8718
Cable Clamp

000918718
SC-B-40773: RNCC: 3 | RNVC: 2
5800041-0026-000: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-090-5274
Cable Hanger

000905274
28-09850: RNCC: 3 | RNVC: 9
T985: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-090-4881
Electrical Conduit Ferrule

000904881
10-40461-145: RNCC: 3 | RNVC: 2
10-40726-142: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-089-8408
Electrical-Electronic Equipment Chassis

000898408
SMD619711: RNCC: 3 | RNVC: 2
836661-801: RNCC: 5 | RNVC: 2

27 Jul 1967

5975-00-089-7588
Spacer

000897588
S526393S7132: RNCC: 3 | RNVC: 9

13 Jul 1967

5975-00-089-2143
Junction Box

000892143
335: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-089-1909
Conduit Outlet Cover

000891909
7382: RNCC: 3 | RNVC: 2
7382: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-087-9400
Duct Tee

000879400
B0M4550: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9407
Raceway Coupler

000879407
B0M4561: RNCC: 3 | RNVC: 9

25 May 1967

5975-00-087-9405
Raceway Tee

000879405
B0M4557: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9395
Sq.Elbow Duct 4In

000879395
B0M4547: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9396
Sq R-Ins Duct 4In

000879396
B0M4548: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-0673
Electrical Conduit Adapter

000870673
1050A: RNCC: 3 | RNVC: 9
TWAD-50: RNCC: 5 | RNVC: 2
2062: RNCC: 5 | RNVC: 9
785: RNCC: 5 | RNVC: 9
TA-101: RNCC: 5 | RNVC: 9
681: RNCC: 5 | RNVC: 9
1141: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-086-6949
Electrical Equipment Mounting Base

000866949
5MD383387A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-079-8784
Electrical Conduit Bushing

000798784
AA50553-3-1-Q-9-08-M: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
AA50553-3-1-Q-9-0: RNCC: 5 | RNVC: 9
033756-0007: RNCC: E | RNVC: 8
BLG3122: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-079-0022
Insulator Pin

000790022
4717: RNCC: 3 | RNVC: 9
3137: RNCC: 5 | RNVC: 9
DP3T1: RNCC: 5 | RNVC: 9
DP5S3: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-078-7088
Electrical Box Connector

000787088
8100W: RNCC: 3 | RNVC: 9
4232: RNCC: 5 | RNVC: 2
4232: RNCC: 5 | RNVC: 2
772: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-076-1665
Flexible Metal Conduit Assembly

000761665
ECGJH136: RNCC: 3 | RNVC: 2
EXGJH136: RNCC: 5 | RNVC: 2
ECGJH136: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-076-1672
Flexible Metal Conduit Assembly

000761672
EXGJH-115: RNCC: 3 | RNVC: 2
ECGJH115: RNCC: 3 | RNVC: 2
ECF-115: RNCC: 3 | RNVC: 2
EXGJH-115: RNCC: 5 | RNVC: 9
ECGJH-50-15: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-076-1674
Flexible Metal Conduit Assembly

000761674
ECGJH110: RNCC: 3 | RNVC: 2
EXHF110: RNCC: 5 | RNVC: 2
ECGJH110: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-075-0448
Electrical Nonmetallic Conduit Assembly

000750448
ECLK124: RNCC: 3 | RNVC: 2
ECLK-50-24: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-072-6075
Electrical Cable Nipple

000726075
2360-2074: RNCC: 3 | RNVC: 2
11139448: RNCC: 3 | RNVC: 2
2360-2074: RNCC: 5 | RNVC: 9
2360-2094: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-070-4498
Electrical-Electronic Equipment Chassis

000704498
983432-3: RNCC: 3 | RNVC: 2

13 Jul 1967

5975-00-069-9324
Conduit Outlet

000699324
GUAL-150: RNCC: 3 | RNVC: 9
GUAL59: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-068-7915
Junction Box

000687915
8018105: RNCC: 3 | RNVC: 2
ESCB884: RNCC: 5 | RNVC: 9
8X8X4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-068-7923
Junction Box

000687923
12X12X6: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-068-7919
Junction Box

000687919
AB-664SBG: RNCC: 3 | RNVC: 2
6X6X4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-068-7916
Junction Box

000687916
AB-886SBG: RNCC: 3 | RNVC: 2
18460: RNCC: 5 | RNVC: 9
8X8X6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-066-8071
Power Sup Top Cover

000668071
0N008602: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-066-3581
Electrical Equipment Rack

000663581
2589228-1: RNCC: 3 | RNVC: 2
2589228-1: RNCC: 5 | RNVC: 2

29 Jun 1967

5975-00-064-4772
Electrical Box Connector

000644772
ST250: RNCC: 3 | RNVC: 1
5238: RNCC: 5 | RNVC: 2
4Q-250: RNCC: 5 | RNVC: 9
4Q-250: RNCC: 5 | RNVC: 9
LT-250: RNCC: 5 | RNVC: 9
11-250: RNCC: 5 | RNVC: 9
773735-8: RNCC: 7 | RNVC: 2

29 Jun 1967

5975-00-064-0321
Junction Box Cover

000640321
65550-02036-044: RNCC: 3 | RNVC: 2

22 Jun 1967

5975-00-064-0317
Junction Box Cover

000640317
65550-02036-043: RNCC: 3 | RNVC: 2

22 Jun 1967

5975-00-063-3736
Junction Box

000633736
A-606CHRFI: RNCC: 3 | RNVC: 9
69C37523-2: RNCC: 7 | RNVC: 2

27 Jun 1967

5975-00-062-4758
Electrical Equipment Leg

000624758
MT2786PRC47: RNCC: 3 | RNVC: 2
549-6473-000: RNCC: 5 | RNVC: 2
549-6473-00: RNCC: 5 | RNVC: 2
549-6473-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-060-4050
Junction Box Cover

000604050
ZT76-152B-COT-5-EE: RNCC: 3 | RNVC: 2
MT22941-050-010: RNCC: 5 | RNVC: 9

15 Jun 1967

5975-00-060-0314
Conduit Outlet

000600314
LBH50: RNCC: 3 | RNVC: 2
ELBD-150: RNCC: 5 | RNVC: 2

16 Dec 1973

5975-00-060-0306
Electrical Conduit Sealing Fitting

000600306
EYS4: RNCC: 3 | RNVC: 2
EY-125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-060-0312
Conduit Outlet

000600312
LBH10: RNCC: 3 | RNVC: 2
ELBD-50: RNCC: 5 | RNVC: 2
XLB-1: RNCC: 5 | RNVC: 2
LBH-0507: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-058-5223
Conduit Outlet

000585223
LB28RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5234
Conduit Outlet

000585234
LL38RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5162
Conduit Outlet

000585162
LB38W/380FANDGASK853N: RNCC: 3 | RNVC: 2
LB100/BC-100GANDASKSGN-100: RNCC: 5 | RNVC: 9
LB38RFI: RNCC: 5 | RNVC: 9

13 Jun 1967

5975-00-058-2229
Electrical Conduit Nipple

000582229
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-058-2227
Electrical Conduit Nipple

000582227
LS35066-06-48: RNCC: 3 | RNVC: 2
WWC581: RNCC: 4 | RNVC: 1
LS35066-06-48: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-058-2223
Electrical Conduit Nipple

000582223
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-058-2222
Electrical Conduit Nipple

000582222
ANSI UL514B: RNCC: 3 | RNVC: 1
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-058-1866
Conduit Outlet

000581866
FDCT2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-057-9410
Electrical Conduit Bushing

000579410
AA50553- 31Q107M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-056-5577
Cable Button

000565577
541-5188-002: RNCC: 3 | RNVC: 2
541-5188-002: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-056-4383
Junction Box

000564383
225: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-056-3986
Electrical Conduit Nipple

000563986
LS35066-06-11: RNCC: 3 | RNVC: 2
WWC581: RNCC: 4 | RNVC: 1
LS35066-06-11: RNCC: 5 | RNVC: 2

1 Jun 1967

5975-00-054-6319
Conduit Outlet

000546319
AA50563-101ALRLA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
L17: RNCC: 5 | RNVC: 1
LRL50N-M: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
L-50NT: RNCC: 5 | RNVC: 9
TYPE I DESIGN I STYLE LRL: RNCC: 5 | RNVC: 9
70-59: RNCC: 5 | RNVC: 9
L17: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-054-6320
Conduit Outlet

000546320
A-A-50563: RNCC: 4 | RNVC: 1
LRL75M: RNCC: 5 | RNVC: 2
W-C-586: RNCC: 5 | RNVC: 9
L-75: RNCC: 5 | RNVC: 9
L-75: RNCC: 5 | RNVC: 9
70-79: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-054-6321
Conduit Outlet

000546321
AA50563-101ALRLC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LRL100M: RNCC: 5 | RNVC: 1
L37: RNCC: 5 | RNVC: 1
TYPE 1 DESIGN 1 STYLE LRL: RNCC: 5 | RNVC: 9
L37: RNCC: 5 | RNVC: 9
70-109: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-054-1865
Electrical Entrance Cap

000541865
AA50563-628GE: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
SP1529: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
TYPE VI DESIGN 28 FORM 7: RNCC: 5 | RNVC: 9

25 May 1967

5975-00-054-1860
Electric Conduit Support

000541860
UPC-75G: RNCC: 3 | RNVC: 9
PC3-4: RNCC: 5 | RNVC: 9
PAR3-4: RNCC: 5 | RNVC: 9

20 May 1967

5975-00-054-1861
Electric Conduit Support

000541861
UPC-50G: RNCC: 3 | RNVC: 9
PAR1-2: RNCC: 5 | RNVC: 9
PC1-2: RNCC: 5 | RNVC: 9

20 May 1967

5975-00-054-1630
Electrical Wall Plate

000541630
49340REQUAL: RNCC: 3 | RNVC: 9
4939: RNCC: 5 | RNVC: 2

15 Dec 1967

5975-00-054-1005
Electrical Cable Nipple

000541005
32GREEN: RNCC: 3 | RNVC: 2
993272-02: RNCC: 5 | RNVC: 2
916B326-26: RNCC: 5 | RNVC: 9
916B326-26: RNCC: 7 | RNVC: 2
413327-15: RNCC: 7 | RNVC: 2

29 May 1968

5975-00-053-3047
Electrical Conductor Bushing

000533047
4952: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-051-7332
Blank Panel

000517332
9A-2575: RNCC: 3 | RNVC: 2
9A-2575: RNCC: 3 | RNVC: 9
DL88-5145: RNCC: 5 | RNVC: 2
PA1105MG: RNCC: 5 | RNVC: 2
1001-012-052: RNCC: 5 | RNVC: 2
RI-013-052: RNCC: 5 | RNVC: 9

16 May 1967

5975-00-051-5927
Blank Panel

000515927
MAP119: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-050-0220
Electrical Conduit Elbow

000500220
C14355: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-049-9057
Metallic Raceway

000499057
1500: RNCC: 3 | RNVC: 2
WR32: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-044-4770
Electrical Equipment Mounting Base

000444770
1509594-901: RNCC: 3 | RNVC: 2
MT2585APN150V: RNCC: 5 | RNVC: 9

17 May 1968

5975-00-043-0778
Electrical Equipment Shelf

000430778
SA1719GT: RNCC: 3 | RNVC: 2

15 May 1968

5975-00-040-2363
Wiring Junction Cover

000402363
8330140: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-2598
Electrical Conductor Bushing

000382598
5M13-20: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-2310
Junction Box Extension

000382310
5739A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-2306
Internal Raceway Elbow

000382306
V517: RNCC: 3 | RNVC: 2
517: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-035-6522
Bushing

000356522
1502: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-035-5917
Ignition Cable Protector

000355917
AN4060-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-034-3479
Electrical Equipment Leg Section

000343479
10064280: RNCC: 3 | RNVC: 2

6 May 1967

5975-00-033-5722
Junction Box

000335722
227467-90: RNCC: 3 | RNVC: 2
227467PC90: RNCC: 5 | RNVC: 2
SK58255: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-033-4917
Junction Box Cover

000334917
N3380: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-031-1703
Contact Asy

000311703
1797-1076G1: RNCC: 3 | RNVC: 2
1797-1076G1: RNCC: 5 | RNVC: 2
1797-1076G1: RNCC: 5 | RNVC: 2
1797-1076G1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-027-4598
Electrical Components Tie Down Strap

000274598
PLC1MS4-0: RNCC: 3 | RNVC: 2
4049-0027: RNCC: 3 | RNVC: 2
AS50931: RNCC: 5 | RNVC: 1
TY13-0: RNCC: 5 | RNVC: 2
TY13-0: RNCC: 5 | RNVC: 2
59A5A116: RNCC: 5 | RNVC: 2
PLC1MS4CM: RNCC: 5 | RNVC: 9
4049-0027: RNCC: 5 | RNVC: 9
59A5A116: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-026-8433
Plain Plug

000268433
227467PC6: RNCC: 3 | RNVC: 2
227467PC6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-014-0784
Cable Spacer

000140784
B4-2: RNCC: 3 | RNVC: 2
B4-2: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-013-9291
Electrical Equipment Leg Section

000139291
2553005-1: RNCC: 3 | RNVC: 2
2553005: RNCC: D | RNVC: 9

3 May 1968

5975-00-012-4376
Electrical Conductor Bushing

000124376
SB2000-26: RNCC: 3 | RNVC: 2
287Z31D16: RNCC: 5 | RNVC: 2
077-003712-054: RNCC: 7 | RNVC: 2

1 Jan 1961

5975-00-011-3455
Junction Box

000113455
G2BAS2: RNCC: 3 | RNVC: 2
G2BA: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-007-5141
Electrical Conductor Bushing

000075141
SMA587746: RNCC: 3 | RNVC: 2
SMA587746: RNCC: 5 | RNVC: 2

14 Jul 1972

5975-00-003-7844
Electrical-Electronic Equipment Chassis

000037844
332254: RNCC: 3 | RNVC: 2
332254: RNCC: 5 | RNVC: 9

19 May 1972

5975-00-003-0933
Junction Box Cover

000030933
500DR: RNCC: 3 | RNVC: 2
500DR: RNCC: 3 | RNVC: 9
500ALDR: RNCC: 5 | RNVC: 9

11 May 1972

5975-01-687-3773
Conduit Outlet Cover

016873773
8827496: RNCC: 3 | RNVC: 2

31 Mar 2020

5975-01-678-3403
Electrical-Electronic Equipment Chassis

016783403
176-1003-000-0C: RNCC: 3 | RNVC: 2
1058758-001-AS: RNCC: D | RNVC: 9

1 Feb 2019

5975-01-659-4953
Junction Box

016594953
574A: RNCC: 3 | RNVC: 2

30 Nov 2016

5975-01-675-8249
Electrical-Electronic Equipment Panel

016758249
3892351: RNCC: 3 | RNVC: 2

28 Sep 2018

5975-01-665-5626
Electrical Conduit Adapter

016655626
712S380NF4040-3C: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-650-2645
Interconnecting Box

016502645
12580285: RNCC: 3 | RNVC: 2

24 Nov 2015

5975-01-662-6156
Electrical Fitting Mounting Base

016626156
EB35DIN: RNCC: 3 | RNVC: 2

13 Apr 2017

5975-01-640-8813
Electrical Conductor Bushing

016408813
56-9200-2: RNCC: 3 | RNVC: 2
97-3918ITEM5: RNCC: C | RNVC: 1

30 Dec 2014

5975-01-628-5622
Blank Panel

016285622
XPN-1719-FP: RNCC: 3 | RNVC: 2

30 May 2014

5975-01-559-3934
Conduit Outlet Cover

015593934
71695K67: RNCC: 3 | RNVC: 2

17 Dec 2007

5975-01-592-9273
Electrical Conduit Elbow

015929273
5975-2195: RNCC: 3 | RNVC: 2
7119K87: RNCC: 5 | RNVC: 2

29 Mar 2011

5975-01-590-9434
Cable Tie Installation Tool

015909434
A31189: RNCC: 1 | RNVC: 2
600-059: RNCC: 3 | RNVC: 2
10184029: RNCC: 6 | RNVC: 9

4 Jan 2011

5975-01-550-3323
Junction Box

015503323
306-9004: RNCC: 3 | RNVC: 2

17 Apr 2007

5975-01-529-7752
Junction Box

015297752
J604W+BP-64-AL: RNCC: 3 | RNVC: 2
J604W+BP-64: RNCC: 5 | RNVC: 9
J604W+BP-64-4L: RNCC: 5 | RNVC: 9
YMD-9407: RNCC: 5 | RNVC: 9

29 Apr 2005

5975-01-542-1717
Junction Box

015421717
A6044NFSS6: RNCC: 3 | RNVC: 2
A6044NFSS6: RNCC: 3 | RNVC: 9
M-307810 B0 ITEM 91: RNCC: 5 | RNVC: 1

25 Jul 2006

5975-01-472-0165
Strain Electrical Conductor Clamp

014720165
30-302-1D03G06: RNCC: 3 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-388-1746
Electronic Equipment Mounting Tray

013881746
6687345-9: RNCC: 3 | RNVC: 2

22 Mar 1994

5975-01-388-7358
Transit Frame

013887358
S 6X1 ALUM (ART#S006000000131): RNCC: 3 | RNVC: 2
A-6: RNCC: 3 | RNVC: 9
A-6: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7241
Transit Frame

013887241
S 4X1 ALU EXTRUD: RNCC: 3 | RNVC: 2
A-4: RNCC: 5 | RNVC: 9
A-4: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-390-7358
Electrical Equipment Cabinet

013907358
3825254: RNCC: 3 | RNVC: 2
846791-2: RNCC: 5 | RNVC: 9

25 May 1994

5975-01-319-6616
Cable Hanger

013196616
5002359: RNCC: 3 | RNVC: 2

11 May 1990

5975-01-216-9333
Stuffing Tube Packing Nut

012169333
M24235/14-062: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
1213E1527 FIND 41: RNCC: 5 | RNVC: 1
1213E1527 FIND 41: RNCC: 5 | RNVC: 9

19 Sep 1985

5975-01-037-4290
Electrical Equipment Mounting Base

010374290
ETN-9750: RNCC: 3 | RNVC: 2
L02301: RNCC: 3 | RNVC: 2
4047-1258PIECE: RNCC: C | RNVC: 1
303-61-001: RNCC: C | RNVC: 1

18 Mar 1977

5975-00-610-5875
Metallic Raceway

006105875
G-3000B: RNCC: 3 | RNVC: 2
32341063: RNCC: 5 | RNVC: 9
3000B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-475-2407
Internal Corner Coupling

004752407
G-3017TCE: RNCC: 3 | RNVC: 2
G3017TC: RNCC: 5 | RNVC: 9
17-1-5984-1: RNCC: 7 | RNVC: 2
3017TCE: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-694-8538
Electrical Equipment Mounting Base

016948538
D1268849-1: RNCC: 3 | RNVC: 2

29 Apr 2021

5975-01-694-6991
Electronic Equipment Mounting Tray

016946991
12467093: RNCC: 3 | RNVC: 2

19 Apr 2021

5975-01-694-5834
Transport Upgrade

016945834
1USHL-139-TRNSUPGRD: RNCC: 3 | RNVC: 2
B3984915-2: RNCC: 7 | RNVC: 2
B3984915: RNCC: D | RNVC: 9

12 Apr 2021

5975-01-694-5826
Electrical Equipment Shelf

016945826
1USHL-139: RNCC: 3 | RNVC: 2
70029624: RNCC: 5 | RNVC: 2
B3984915-1: RNCC: 7 | RNVC: 2
B3984915: RNCC: D | RNVC: 9

12 Apr 2021

5975-01-694-1710
Blank Panel

016941710
331E00116500: RNCC: 3 | RNVC: 2
331E00116500: RNCC: C | RNVC: 1

19 Mar 2021

5975-01-693-7646
Junction Box

016937646
8592608-200: RNCC: 3 | RNVC: 2
311-8592608 FIND NUMBER 2: RNCC: C | RNVC: 1
311-8592608: RNCC: D | RNVC: 9

4 Mar 2021

5975-01-689-7745
Junction Box

016897745
3596AS440-1: RNCC: 3 | RNVC: 2
3596AS440: RNCC: D | RNVC: 9

9 Jul 2020

5975-01-685-6182
Sleeve Assembly

016856182
2712750: RNCC: 3 | RNVC: 2
2712750: RNCC: 5 | RNVC: 2
2712750: RNCC: 5 | RNVC: 9

2 Jan 2020

5975-01-678-8134
Electrical Fitting Mounting Base

016788134
1704: RNCC: 3 | RNVC: 2
10452: RNCC: 5 | RNVC: 2

27 Feb 2019

5975-01-672-3749
Cable Hanger

016723749
04-2815616-1: RNCC: 3 | RNVC: 2

30 Apr 2018

5975-01-672-0375
Electrical Equipment Cabinet

016720375
A1-46080D: RNCC: 3 | RNVC: 2

19 Apr 2018

5975-01-670-7837
Mounting Plate

016707837
1025712-001: RNCC: 3 | RNVC: 2

6 Mar 2018

5975-01-670-7539
Jet Hub Assembly

016707539
808-105: RNCC: 3 | RNVC: 2

5 Mar 2018

5975-01-669-3808
Electrical-Electronic Equipment Chassis

016693808
02-2802271-1: RNCC: 3 | RNVC: 2

9 Jan 2018

5975-01-665-5554
Electrical Conduit Adapter

016655554
712S380NF2424-3C: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-663-9818
Electrical-Electronic Equipment Chassis

016639818
H274A249-01: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-659-8522
Electrical Equipment Rack

016598522
1045727: RNCC: 3 | RNVC: 2

20 Dec 2016

5975-01-657-4892
Electrical Equipment Foot

016574892
2284T52: RNCC: 3 | RNVC: 2

16 Aug 2016

5975-01-656-5001
Mounting Plate

016565001
FR-0055-2086: RNCC: 3 | RNVC: 2

6 Jul 2016

5975-01-656-4991
Electrical-Electronic Equipment Panel

016564991
FR-0055-2243: RNCC: 3 | RNVC: 2

6 Jul 2016

5975-01-656-4988
Mounting Plate

016564988
IN-0055-0282: RNCC: 3 | RNVC: 2

6 Jul 2016

5975-01-656-4001
Electrical-Electronic Equipment Panel

016564001
FR-0055-2237: RNCC: 3 | RNVC: 2

29 Jun 2016

5975-01-656-3990
Electrical-Electronic Equipment Panel

016563990
FP-X60M: RNCC: 3 | RNVC: 2

29 Jun 2016

5975-01-656-3996
Electrical-Electronic Equipment Panel

016563996
FR-0055-2090: RNCC: 3 | RNVC: 2

29 Jun 2016

5975-01-653-2135
Electrical-Electronic Equipment Chassis

016532135
04-2825127-1: RNCC: 3 | RNVC: 2

15 Mar 2016

5975-01-648-4945
Electrical Equipment Mounting Base

016484945
3101203-502: RNCC: 3 | RNVC: 2

26 Sep 2015

5975-01-648-0728
Position Cntrl

016480728
07440190-3: RNCC: 3 | RNVC: 2
07440190-3: RNCC: 3 | RNVC: 2

14 Sep 2015

5975-01-643-5607
Electrical Cable Protector

016435607
034NPBSG: RNCC: 3 | RNVC: 9
PLS-3/4: RNCC: 5 | RNVC: 2
PLS-3/4: RNCC: 5 | RNVC: 9

7 Apr 2015

5975-01-643-3481
Flexible Metal Conduit

016433481
M24758-D: RNCC: 3 | RNVC: 2

30 Mar 2015

5975-01-642-8371
Electrical-Electronic Equipment Chassis

016428371
618-679-00: RNCC: 3 | RNVC: 2
618-679-00-AD: RNCC: D | RNVC: 9

11 Mar 2015

5975-01-632-6848
Cable Hanger

016326848
A24007-1: RNCC: 3 | RNVC: 2

27 Oct 2014

5975-01-630-6472
Electrical-Electronic Equipment Chassis

016306472
12083-2200-01: RNCC: 3 | RNVC: 2

12 Aug 2014

5975-01-629-7179
Electrical Equipment Mounting Base

016297179
3138413: RNCC: 3 | RNVC: 2
3138413: RNCC: 5 | RNVC: 2

11 Jul 2014

5975-01-629-2762
Electrical Equipment Mounting Base

016292762
300A451-1: RNCC: 3 | RNVC: 2

24 Jun 2014

5975-01-629-2240
Flexible Metal Conduit Assembly

016292240
RA-1276: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-627-6394
Electrical Components Tie Down Strap

016276394
2105292-3: RNCC: 3 | RNVC: 2

21 Apr 2014

5975-01-622-4878
Strain Electrical Conductor Clamp

016224878
G6-14-8026-003: RNCC: 3 | RNVC: 2

9 Oct 2013

5975-01-620-5921
Electronic Equipment Mounting Tray

016205921
300A407-1: RNCC: 3 | RNVC: 2

31 Jul 2013

5975-01-615-5664
Electrical Nonmetallic Conduit Assembly

016155664
229A671-2: RNCC: 3 | RNVC: 2
202C621-71: RNCC: 5 | RNVC: 2

16 Jan 2013

5975-01-613-5248
Electrical-Electronic Equipment Chassis

016135248
TCR014511-10: RNCC: 3 | RNVC: 2

8 Nov 2012

5975-01-613-4952
Electrical-Electronic Equipment Panel

016134952
TCR014518-01: RNCC: 3 | RNVC: 2

8 Nov 2012

5975-01-613-4487
Electrical Grounding Plate

016134487
TCR014535-01: RNCC: 3 | RNVC: 2

7 Nov 2012

5975-01-611-4794
Electrical-Electronic Equipment Chassis

016114794
4079103-0501: RNCC: 3 | RNVC: 2

16 Sep 2012

5975-01-605-6386
Electrical Equipment Mounting Base

016056386
ABP-RM-5: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-603-2143
Raceway Cover

016032143
40930002: RNCC: 3 | RNVC: 2
40930002: RNCC: 5 | RNVC: 9

24 Feb 2012

5975-01-600-8457
Electrical-Electronic Equipment Chassis

016008457
781368-01: RNCC: 3 | RNVC: 2

21 Dec 2011

5975-01-600-8078
Electrical-Electronic Equipment Chassis

016008078
TCR014012-10: RNCC: 3 | RNVC: 2

20 Dec 2011

5975-01-697-3911
Electrical Components Tie Down Strap

016973911
316-9351: RNCC: 3 | RNVC: 2
316-9351: RNCC: 5 | RNVC: 2

17 Sep 2021

5975-01-697-0486
Electrical Components Tie Down Strap

016970486
326-4516: RNCC: 3 | RNVC: 2

30 Aug 2021

5975-01-595-7472
Cable Marker Sleeve

015957472
3907AS2220-99: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-690-9062
Electrical Components Tie Down Strap

016909062
CTB1X1BKA-C: RNCC: 3 | RNVC: 9
8665845-0: RNCC: 7 | RNVC: 2
8665845 REV X1: RNCC: D | RNVC: 9

9 Sep 2020

5975-01-690-7304
Electrical Tie Down Mounting Base

016907304
CB3019AA5N: RNCC: 3 | RNVC: 2

28 Aug 2020

5975-01-593-2933
Electrical-Electronic Equipment Chassis

015932933
296A191-1: RNCC: 3 | RNVC: 2

6 Apr 2011

5975-01-685-1868
Rigid Metal Conduit Assembly

016851868
C99F34708: RNCC: 3 | RNVC: 2
C99F34708: RNCC: 3 | RNVC: 9

5 Dec 2019

5975-01-681-5543
Junction Box

016815543
CCA332318: RNCC: 3 | RNVC: 2
CCA332318: RNCC: 5 | RNVC: 9

21 Jun 2019

5975-01-678-3213
Electrical-Electronic Equipment Chassis

016783213
576-1015-F10-08: RNCC: 3 | RNVC: 2

31 Jan 2019

5975-01-673-7886
Electrical Equipment Mounting Base

016737886
STK-RACK-DINRAIL=: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-583-6058
Electrical Cable Protector

015836058
232A627-1: RNCC: 3 | RNVC: 2

30 Mar 2010

5975-01-581-7286
Electrical-Electronic Equipment Chassis

015817286
8535002-920: RNCC: 3 | RNVC: 2

26 Jan 2010

5975-01-580-2507
Electrical-Electronic Equipment Chassis

015802507
G533441-2: RNCC: 3 | RNVC: 2
G533441-2: RNCC: 5 | RNVC: 2

9 Dec 2009

5975-01-655-4265
Electrical Equipment Rack

016554265
MB453TRAY-2B: RNCC: 3 | RNVC: 9
MB453TRY-B: RNCC: 5 | RNVC: 9

26 May 2016

5975-01-655-3186
Electrical-Electronic Equipment Chassis

016553186
SFR514A: RNCC: 3 | RNVC: 2
2860006: RNCC: D | RNVC: 9

24 May 2016

5975-01-653-7205
Electrical Components Tie Down Strap

016537205
TY27MX-A: RNCC: 3 | RNVC: 2
TY27MX-A: RNCC: 5 | RNVC: 2
TY27MX-A: RNCC: 5 | RNVC: 9

4 Apr 2016

5975-01-653-5263
Electrical-Electronic Equipment Chassis

016535263
70-0389-101: RNCC: 3 | RNVC: 2
70-0389-101: RNCC: 5 | RNVC: 2
70-0389-101: RNCC: 5 | RNVC: 9
70-0389-101: RNCC: 5 | RNVC: 9

27 Mar 2016

5975-01-648-5260
Kvm Assembly

016485260
14021-7026-01: RNCC: 3 | RNVC: 9

28 Sep 2015

5975-01-645-3572
Electronic Equipment Mounting Tray

016453572
004-030032-000: RNCC: 3 | RNVC: 2

12 Jun 2015

5975-01-640-7125
Electrical-Electronic Equipment Panel

016407125
14021-0028-01: RNCC: 3 | RNVC: 1
D14021-0028-MD01: RNCC: 5 | RNVC: 1

18 Dec 2014

5975-01-569-8555
Electrical-Electronic Equipment Chassis

015698555
232A719-9: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-8553
Electrical-Electronic Equipment Chassis

015698553
232A719-6: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-8060
Electrical-Electronic Equipment Chassis

015698060
232A719-8: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-7667
Electrical-Electronic Equipment Chassis

015697667
232A719-10: RNCC: 3 | RNVC: 2

8 Dec 2008

5975-01-568-3010
Junction Box

015683010
13227E6125: RNCC: 3 | RNVC: 2

27 Oct 2008

5975-01-566-3434
Flexible Nonmetallic Conduit

015663434
M1833: RNCC: 3 | RNVC: 2

28 Aug 2008

5975-01-564-9113
Electrical-Electronic Equipment Chassis

015649113
2200214-201: RNCC: 3 | RNVC: 2

2 Jul 2008

5975-01-626-0705
Electrical Equipment Cabinet

016260705
CABINET SE 125 DUAL: RNCC: 3 | RNVC: 9

26 Feb 2014

5975-01-623-2592
Electrical Standardized Components Case

016232592
MA-0055-02: RNCC: 3 | RNVC: 2
MA-0055-02: RNCC: 3 | RNVC: 9

6 Nov 2013

5975-01-560-2656
Electrical-Electronic Equipment Chassis

015602656
110-2821-000-0C: RNCC: 3 | RNVC: 2

23 Jan 2008

5975-01-616-3542
Electrical Equipment Mounting Base

016163542
09022F1061-1: RNCC: 3 | RNVC: 2

11 Feb 2013

5975-01-553-1254
Chassis Base

015531254
64008-1: RNCC: 3 | RNVC: 2
974404A03: RNCC: 5 | RNVC: 2
64008-1: RNCC: 5 | RNVC: 9

9 Jul 2007

5975-01-550-0278
Electrical Equipment Rack

015500278
260A821-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-01-550-0259
Electrical Equipment Rack

015500259
260A791-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-01-550-0257
Electrical Equipment Rack

015500257
260A811-1: RNCC: 3 | RNVC: 2
260A811: RNCC: D | RNVC: 9

5 Apr 2007

5975-01-549-3186
Electrical Nonmetallic Conduit Assembly

015493186
260A809-6: RNCC: 3 | RNVC: 2
740NC102NFH171H171-21-72: RNCC: 5 | RNVC: 9

16 Mar 2007

5975-01-549-0440
Electrical-Electronic Equipment Chassis

015490440
640-008362-P001: RNCC: 3 | RNVC: 2
14V-38121-R05J12P250C-SN3: RNCC: 5 | RNVC: 2

9 Mar 2007

5975-01-546-4520
Electrical-Electronic Equipment Chassis

015464520
VA-016753-0003: RNCC: 3 | RNVC: 2

15 Dec 2006

5975-01-546-0256
Electrical Grounding Plate

015460256
N-174: RNCC: 3 | RNVC: 2

4 Dec 2006

5975-01-545-0019
Electrical Equipment Mounting Base

015450019
GD32: RNCC: 3 | RNVC: 2

30 Oct 2006

5975-01-585-9555
Electrical Equipment Leg

015859555
SAC4451: RNCC: 3 | RNVC: 9

14 Jun 2010

5975-01-581-6229
Electrical-Electronic Equipment Chassis

015816229
AT-MCR12-4: RNCC: 3 | RNVC: 9

22 Jan 2010

5975-01-575-7604
Electrical-Electronic Equipment Chassis

015757604
1071748: RNCC: 3 | RNVC: 2

14 Jul 2009

5975-01-536-5836
Electrical-Electronic Equipment Chassis

015365836
CTM-100/C: RNCC: 3 | RNVC: 9
244-990305-675: RNCC: 5 | RNVC: 2

9 Jan 2006

5975-01-573-5209
Electrical Equipment Rack Base

015735209
A3266017: RNCC: 3 | RNVC: 2

27 Apr 2009

5975-01-573-3312
Electrical-Electronic Equipment Chassis

015733312
AT8628: RNCC: 3 | RNVC: 2

16 Apr 2009

5975-01-560-3456
Electrical Wall Plate

015603456
S82: RNCC: 3 | RNVC: 2

28 Jan 2008

5975-01-550-9521
Electrical-Electronic Equipment Chassis

015509521
AV3200-001: RNCC: 3 | RNVC: 9
A2000R-AM: RNCC: 5 | RNVC: 9

3 May 2007

5975-01-550-1046
Electrical Equipment Mounting Base

015501046
RMK39: RNCC: 3 | RNVC: 9

9 Apr 2007

5975-01-549-0850
Electrical Components Tie Down Strap

015490850
110-030: RNCC: 3 | RNVC: 9

12 Mar 2007

5975-01-548-2545
Electrical Conduit Elbow

015482545
153-499: RNCC: 3 | RNVC: 9

15 Feb 2007

5975-01-511-3365
Flexible Metal Conduit Assembly

015113365
759-395: RNCC: 3 | RNVC: 2

6 Aug 2003

5975-01-501-0119
Electrical Equipment Mounting Base

015010119
780R164G03: RNCC: 3 | RNVC: 2
780R164G03: RNCC: 3 | RNVC: 2

20 Sep 2002

5975-01-495-3470
Electrical-Electronic Equipment Chassis

014953470
112908-002: RNCC: 3 | RNVC: 2

13 Mar 2002

5975-01-487-4201
Electrical-Electronic Equipment Chassis

014874201
CAE003495: RNCC: 3 | RNVC: 2
CAE003495: RNCC: 5 | RNVC: 2

6 Aug 2001

5975-01-486-0479
Electrical Nonmetallic Conduit Assembly

014860479
23A01845-046: RNCC: 3 | RNVC: 2
740NF102NFH111H251-14-118: RNCC: 5 | RNVC: 2
2046AS072-46: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-477-1815
Prote Connector Kit

014771815
HCPS-69J: RNCC: 3 | RNVC: 2
HCPS-69J: RNCC: 3 | RNVC: 9
HCPS-69J: RNCC: 5 | RNVC: 9
6317986-021: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1813
Prote Connector Kit

014771813
HCPS-109J: RNCC: 3 | RNVC: 2
HCPS-109J: RNCC: 3 | RNVC: 9
6317986-025: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1812
Prote Connector Kit

014771812
HCPS-79J: RNCC: 3 | RNVC: 2
HCPS-79J: RNCC: 3 | RNVC: 9
HCPS-79J: RNCC: 5 | RNVC: 9
6317986-022: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1814
Prote Connector Kit

014771814
HCPS-99J: RNCC: 3 | RNVC: 2
HCPS-99J: RNCC: 3 | RNVC: 9
HCPS-99J: RNCC: 5 | RNVC: 9
6317986-024: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1811
Prote Connector Kit

014771811
HCPS-89J: RNCC: 3 | RNVC: 2
HCPS-89J: RNCC: 3 | RNVC: 9
HCPS-89J: RNCC: 5 | RNVC: 9
6317986-023: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-476-1746
Electronic Components Assembly

014761746
119533-0001: RNCC: 3 | RNVC: 2

17 Jun 2014

NSN 5975-01-437-9784 014379784 BUSHING,ELECTRICAL CONDUCTOR

5975-01-437-9784
Electrical Conductor Bushing

014379784
EL64-60: RNCC: 3 | RNVC: 2
1640-1110: RNCC: 5 | RNVC: 2

28 Oct 1996

5975-01-458-8342
Electrical-Electronic Equipment Panel

014588342
G1-50-1000-801: RNCC: 3 | RNVC: 2
G1-50-1000-800: RNCC: 5 | RNVC: 2

11 Sep 1998

5975-01-457-9296
Electrical-Electronic Equipment Chassis

014579296
129020-59: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9231
Electrical-Electronic Equipment Chassis

014579231
129020-59A: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9070
Electrical-Electronic Equipment Chassis

014579070
129020-59B: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-453-4265
Electrical Equipment Mounting Base

014534265
4290362-501: RNCC: 3 | RNVC: 2
4290362-501: RNCC: 5 | RNVC: 2

28 Feb 1998

5975-01-450-7176
Rigid Metal Conduit Assembly

014507176
68A250749-2005: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-01-437-8869
Electrical-Electronic Equipment Chassis

014378869
H405A058-97: RNCC: 3 | RNVC: 2

25 Oct 1996

5975-01-434-6297
Electronic Equipment Mounting Tray

014346297
94247-1: RNCC: 3 | RNVC: 2
94247-1: RNCC: 5 | RNVC: 9

2 Aug 1996

5975-01-371-2403
Electrical-Electronic Equipment Chassis

013712403
A3014092-1: RNCC: 3 | RNVC: 2

9 Feb 1993

5975-01-360-7382
Connector Protection Flange

013607382
TH-3: RNCC: 3 | RNVC: 2
TH-3H: RNCC: 3 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9

30 Jun 1992

5975-01-360-7383
Connector Protection Flange

013607383
TH-4G: RNCC: 3 | RNVC: 2
TH-4G: RNCC: 3 | RNVC: 9

30 Jun 1992

5975-01-360-4733
Protection Connector Kit

013604733
7100164380: RNCC: 3 | RNVC: 2
HCPS-74: RNCC: 5 | RNVC: 9
HCPS-74: RNCC: 5 | RNVC: 9
HCPS-74: RNCC: 5 | RNVC: 9

24 Jun 1992

5975-01-360-4732
Protection Connector Kit

013604732
HCPS-84: RNCC: 3 | RNVC: 9
HCPS-84: RNCC: 5 | RNVC: 9
HCPS-84: RNCC: C | RNVC: 1

24 Jun 1992

5975-01-360-4734
Protection Connector Kit

013604734
HCPS-64: RNCC: 3 | RNVC: 2
HCPS-64: RNCC: 3 | RNVC: 9
HCPS-64: RNCC: 5 | RNVC: 9
6317971-011: RNCC: C | RNVC: 1

24 Jun 1992

Load More Results