What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

What is an Electrical Box Connector?

An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Coupling?

An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.

Electrical Hardware and Supplies - United States (US)

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Federal Supply Group (FSG): 59 Electrical and Electronic Equipment Components

NATO Supply Classification Group (NSG): 59 Electrical and Electronic Equipment Components

Items Managed by United States (US) - NCB is 00 to 09

Page 100 of 176

NSN Format for Electrical Hardware and Supplies
Codified by United States

59	75	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

FSC 5975 Electrical Hardware and Supplies - United States (US)

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 768 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 262 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 258 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1671 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 139 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 13 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 59 Items
What is a Switch Terminal Cover? 107 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 141 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 1137 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 28 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 501 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 124 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 324 Items
What is a Crossarm Brace? 31 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 814 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 55 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 53 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 74 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 421 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 144 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 21 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 72 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 2471 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 547 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 1478 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 2666 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 43 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 1842 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 56 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 38 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 143 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 34 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 290 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 17 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 130 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 419 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 985 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 118 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 595 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 482 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is a Pole Step? 13 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Interior Cable Rack? 78 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 274 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 28 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 104 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 1449 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 391 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 167 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 17 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 79 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 123 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 33 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 193 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 18 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 552 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 27 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 10 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 84 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 1873 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 73 Items
Case,Switch Box 44 Items
What is a Ground Rod Section? 30 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 71 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 87 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Transmission Line Grounding Set? 38 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 1191 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 81 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 21 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 472 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 11 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 564 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 512 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 111 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 25 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 10 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 12 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 151 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 60 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 86 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 299 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1312 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 383 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 44 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 676 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 23 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 16 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 202 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 657 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 518 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 3161 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 253 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 16 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 626 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 196 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 376 Items
Raceway,Nonmetallic 122 Items
What is an Electrical-Electronic Equipment Panel? 2447 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box Supplementary Equipment? 14 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 5595 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Mounting Plate? 324 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 13 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 39 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 149 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is an Electrical Box Sealing Flange? 10 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 15 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 90 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 21 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 228 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 946 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 25 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 92 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is a Rigid Metal Conduit Assembly? 597 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 41 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 74 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 2073 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 15 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 100 of 176

5975-00-296-6608
Stuffing Tube

002966608
M24235-11-02: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1
9000-S6202-74438: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-839-6277
Offset Raceway Connector

008396277
V5786: RNCC: 3 | RNVC: 2
PC412800048F1: RNCC: 5 | RNVC: 9
PC412800048F1: RNCC: 5 | RNVC: 9
5786: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-038-2357
Metallic Raceway

000382357
V500: RNCC: 3 | RNVC: 2
500: RNCC: 5 | RNVC: 9
222: RNCC: 5 | RNVC: 9
TYPE500: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-686-6944
Electrical Equipment Mounting Base

016866944
4101AS0175-1: RNCC: 3 | RNVC: 2
4101AS0175: RNCC: D | RNVC: 9

28 Feb 2020

5975-01-651-5920
Electrical Nonmetallic Conduit Assembly

016515920
70551-07000-103: RNCC: 3 | RNVC: 2
70551-07000: RNCC: D | RNVC: 9

22 Jan 2016

5975-01-609-8587
Flexible Metal Conduit Assembly

016098587
4G14259-101A: RNCC: 3 | RNVC: 2

4 Aug 2012

5975-01-590-9711
Electrical Nonmetallic Conduit Assembly

015909711
23A02055: RNCC: 3 | RNVC: 2
749-051: RNCC: 3 | RNVC: 2
13425156: RNCC: 7 | RNVC: 2

5 Jan 2011

5975-01-689-9580
Cable Terminal Chamber

016899580
2718196: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-689-9463
Cable Terminal Chamber

016899463
1858057: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-690-6568
Electrical Nonmetallic Conduit Assembly

016906568
200AS349-040KG06041FA100: RNCC: 3 | RNVC: 2

25 Aug 2020

5975-01-690-6570
Electrical Nonmetallic Conduit Assembly

016906570
200AS349-041FG04041KA016: RNCC: 3 | RNVC: 2
749-183-15: RNCC: 5 | RNVC: 2

25 Aug 2020

5975-01-695-0442
Electrical Tie Down Mounting Base

016950442
CB3019CR3N: RNCC: 3 | RNVC: 2
HS5837-CR3N-750: RNCC: 7 | RNVC: 2
HS5837 REV B: RNCC: D | RNVC: 9

11 May 2021

5975-01-689-5138
Electrical Wall Plate

016895138
1302215: RNCC: 3 | RNVC: 2

24 Jun 2020

5975-01-689-9467
Cable Terminal Chamber

016899467
461018: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-687-1782
Interconnecting Box

016871782
123AV93636-19: RNCC: 3 | RNVC: 2

23 Mar 2020

5975-01-680-8559
Electrical-Electronic Equipment Panel

016808559
930-31120-1: RNCC: 3 | RNVC: 2
PL930-31120: RNCC: C | RNVC: 1
930-31120: RNCC: D | RNVC: 9

23 May 2019

5975-01-681-3373
Electrical-Electronic Equipment Chassis

016813373
CB50498-001: RNCC: 3 | RNVC: 2
CB50498: RNCC: D | RNVC: 9

13 Jun 2019

5975-01-606-6144
Rigid Metal Conduit

016066144
T4G04103-119A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-609-2819
Flexible Metal Conduit

016092819
W-1297-20: RNCC: 3 | RNVC: 2
12510307: RNCC: 3 | RNVC: 2
179489-3204: RNCC: 5 | RNVC: 9
179489-3204: RNCC: C | RNVC: 1
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-609-2824
Flexible Metal Conduit

016092824
12510305: RNCC: 1 | RNVC: 2
179489-2008: RNCC: 3 | RNVC: 2
W-1297-18: RNCC: 3 | RNVC: 2
179489-2008: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-614-5182
Electrical Wall Plate

016145182
2CCB-FS: RNCC: 3 | RNVC: 2
11B5091504: RNCC: 7 | RNVC: 2

6 Dec 2012

5975-01-649-6987
Electrical-Electronic Equipment Panel

016496987
7-611642002-001: RNCC: 1 | RNVC: 2
MD18010-1: RNCC: 3 | RNVC: 2
MD12010-1: RNCC: 5 | RNVC: 9

6 Nov 2015

5975-01-533-6581
Electrical Equipment Rack Base

015336581
4981949-1: RNCC: 3 | RNVC: 2
4981949-3: RNCC: 3 | RNVC: 2

22 Sep 2005

5975-01-609-2821
Flexible Metal Conduit

016092821
12510306: RNCC: 1 | RNVC: 2
W-1297-19: RNCC: 3 | RNVC: 2
179489-2300: RNCC: 5 | RNVC: 9
179489-2300: RNCC: C | RNVC: 1
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-609-2822
Flexible Metal Conduit

016092822
12510344: RNCC: 1 | RNVC: 2
W-1297-21: RNCC: 3 | RNVC: 2
179489-4208: RNCC: 3 | RNVC: 2
179489-4208: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-568-1600
Electrical Cable Protector

015681600
13540109: RNCC: 3 | RNVC: 2
13540109: RNCC: 5 | RNVC: 1

22 Oct 2008

5975-01-604-5844
Electronic Junction Rack

016045844
LL200: RNCC: 3 | RNVC: 2
008-014298-0001: RNCC: 7 | RNVC: 2
008-014298: RNCC: D | RNVC: 9

9 Apr 2012

5975-01-465-5059
Strain Electrical Conductor Clamp

014655059
11475031: RNCC: 3 | RNVC: 2

10 Jun 1999

5975-01-445-6167
Electrical Equipment Mounting Base

014456167
822-0790-001: RNCC: 3 | RNVC: 2

6 Jun 1997

5975-01-471-8722
Strain Electrical Conductor Clamp

014718722
30-302-2D06J14: RNCC: 3 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-327-3945
Cable Channel

013273945
7241541-04: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-219-8703
Junction Box

012198703
70550-02130-048: RNCC: 3 | RNVC: 2

4 Nov 1985

5975-01-119-7761
Flexible Metal Conduit Assembly

011197761
10911019: RNCC: 1 | RNVC: 2
W-1297-13: RNCC: 3 | RNVC: 2
179489-0200: RNCC: 3 | RNVC: 2
8711297: RNCC: D | RNVC: 9

4 Oct 1981

5975-01-069-4688
Electrical Conduit Union

010694688
UNY75NR: RNCC: 3 | RNVC: 2
UNY215: RNCC: 5 | RNVC: 2
UNY-75B: RNCC: 5 | RNVC: 9

16 Dec 1978

5975-00-141-3559
Electrical Equipment Shelf

001413559
SCD48610: RNCC: 3 | RNVC: 2

12 Jan 1973

5975-01-143-1920
Cable Hanger

011431920
71320328-009: RNCC: 3 | RNVC: 2

28 Nov 1982

5975-01-113-9716
Conduit Outlet Cover

011139716
62594: RNCC: 3 | RNVC: 2
62594: RNCC: 5 | RNVC: 1

7 Jun 1981

5975-00-963-7947
Boot Support Collar

009637947
17778: RNCC: 3 | RNVC: 2
950778-507: RNCC: 5 | RNVC: 2
950788-507: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-686-8354
Electrical Components Tie Down Strap

016868354
826/11445: RNCC: 3 | RNVC: 2

6 Mar 2020

5975-01-684-9011
Cable Marker Sleeve

016849011
3PS-500-2-WT: RNCC: 3 | RNVC: 2

20 Nov 2019

5975-01-682-0660
Electrical Components Tie Down Strap

016820660
N630597-01: RNCC: 3 | RNVC: 2
N630597-01: RNCC: 5 | RNVC: 2

18 Jul 2019

5975-01-682-0643
Electrical Components Tie Down Strap

016820643
1000434-01: RNCC: 3 | RNVC: 2
1000434-01: RNCC: 5 | RNVC: 2

18 Jul 2019

5975-01-679-7052
Electrical Equipment Rack

016797052
630200: RNCC: 3 | RNVC: 2

8 Apr 2019

5975-01-678-6046
Electrical Tie Down Mounting Base

016786046
CB4021E3N8: RNCC: 3 | RNVC: 2

14 Feb 2019

5975-01-678-1950
Switch Terminal Cover

016781950
AL4008099: RNCC: 3 | RNVC: 2
AL4008099: RNCC: 5 | RNVC: 2

25 Jan 2019

5975-01-678-1630
Electrical Cable Protector

016781630
12616317-1: RNCC: 3 | RNVC: 2

24 Jan 2019

5975-01-678-0597
Rear Bay Assembly

016780597
SPAL4003178: RNCC: 3 | RNVC: 2
SPAL4003178: RNCC: 5 | RNVC: 2

18 Jan 2019

5975-01-678-0568
Blank Panel

016780568
SPAL4003281: RNCC: 3 | RNVC: 2
SPAL4003281: RNCC: 5 | RNVC: 2

18 Jan 2019

5975-01-678-0531
Electrical Equipment Mounting Base

016780531
SPAL4003022: RNCC: 3 | RNVC: 2
SPAL4003022: RNCC: 5 | RNVC: 2

18 Jan 2019

5975-01-677-9699
Electrical Cable Protector

016779699
12584891-1: RNCC: 3 | RNVC: 2
12584891: RNCC: D | RNVC: 9

15 Jan 2019

5975-01-677-8912
Metallic Raceway

016778912
12584876-1: RNCC: 3 | RNVC: 2
12584876: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8911
Metallic Raceway

016778911
12584882-1: RNCC: 3 | RNVC: 2
12584882: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8905
Metallic Raceway

016778905
12584880-1: RNCC: 3 | RNVC: 2
12584880: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8909
Metallic Raceway

016778909
12584881-1: RNCC: 3 | RNVC: 2
12584881: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8073
Electrical Tie Down Mounting Base

016778073
AL4004263: RNCC: 3 | RNVC: 2
AL4004263: RNCC: 5 | RNVC: 2

8 Jan 2019

5975-01-677-7035
Rigid Metal Conduit Assembly

016777035
AL4005405: RNCC: 3 | RNVC: 2
AL4005405: RNCC: 5 | RNVC: 2

2 Jan 2019

5975-01-677-7038
Rigid Metal Conduit Assembly

016777038
AL4005385: RNCC: 3 | RNVC: 2
AL4005385: RNCC: 5 | RNVC: 2

2 Jan 2019

5975-01-677-7036
Rigid Metal Conduit Assembly

016777036
AL4005386: RNCC: 3 | RNVC: 2
AL4005386: RNCC: 5 | RNVC: 9
AL4005384: RNCC: 5 | RNVC: 9

2 Jan 2019

5975-01-677-6965
Metallic Raceway

016776965
12584878-101: RNCC: 3 | RNVC: 2
12584878: RNCC: D | RNVC: 9

31 Dec 2018

5975-01-677-6898
Electrical Cable Protector

016776898
12584877-1: RNCC: 3 | RNVC: 2

31 Dec 2018

5975-01-677-6175
Electrical Cable Protector

016776175
12584885-1: RNCC: 3 | RNVC: 2

21 Dec 2018

5975-01-677-2814
Electrical Grounding Plate

016772814
12603259: RNCC: 3 | RNVC: 2
12603259: RNCC: C | RNVC: 1

6 Dec 2018

5975-01-672-1797
Conduit Outlet

016721797
TC610 & 48-610: RNCC: 3 | RNVC: 2
3886013: RNCC: 5 | RNVC: 2

24 Apr 2018

5975-01-672-1569
Electrical Cable Protector

016721569
3560079: RNCC: 3 | RNVC: 2

23 Apr 2018

5975-01-671-3193
Electrical Components Tie Down Strap

016713193
111-12300: RNCC: 3 | RNVC: 2
10062210: RNCC: 7 | RNVC: 2

22 Mar 2018

5975-01-670-6774
Blank Panel

016706774
12603450: RNCC: 3 | RNVC: 2
12603450: RNCC: C | RNVC: 1

1 Mar 2018

5975-01-670-6772
Blank Panel

016706772
12603485: RNCC: 3 | RNVC: 2
12603485: RNCC: C | RNVC: 1

1 Mar 2018

5975-01-667-8254
Cable Hanger

016678254
SAT-10132-01: RNCC: 3 | RNVC: 2
6525NCM173712: RNCC: 5 | RNVC: 1
1448449: RNCC: 5 | RNVC: 1

1 Nov 2017

5975-01-666-7762
Ground Rod

016667762
615800: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-6290
Flexible Nonmetallic Conduit

016666290
120-116-1-114BE: RNCC: 3 | RNVC: 2
3955652: RNCC: 7 | RNVC: 2

14 Sep 2017

5975-01-660-2275
Flexible Nonmetallic Conduit

016602275
M1889010: RNCC: 3 | RNVC: 2
4273737: RNCC: 7 | RNVC: 2

11 Jan 2017

5975-01-659-3356
Electrical Equipment Cabinet

016593356
12604581: RNCC: 3 | RNVC: 2

18 Nov 2016

5975-01-658-3768
Blank Panel

016583768
PWR-C1-BLANK=: RNCC: 3 | RNVC: 2
PWR-C1-BLANK: RNCC: 5 | RNVC: 2

23 Sep 2016

5975-01-657-2799
Electrical Tie Down Mounting Base

016572799
7565K56: RNCC: 3 | RNVC: 2
7565K56: RNCC: 3 | RNVC: 2
10062034: RNCC: 7 | RNVC: 2

5 Aug 2016

5975-01-653-8827
Mounting Plate

016538827
430-1018-001: RNCC: 3 | RNVC: 9

8 Apr 2016

5975-01-652-5605
Flexible Metal Conduit Assembly

016525605
901-033-866-101: RNCC: 3 | RNVC: 2
901-033-866: RNCC: D | RNVC: 9

26 Feb 2016

5975-01-650-1407
Electrical Components Tie Down Strap

016501407
L-8-18-0-C: RNCC: 3 | RNVC: 2

20 Nov 2015

5975-01-649-2263
Electrical-Electronic Equipment Chassis

016492263
1008948G-1: RNCC: 3 | RNVC: 2
PL1008948G-1: RNCC: D | RNVC: 9
1008948G: RNCC: D | RNVC: 9

21 Oct 2015

5975-01-646-3007
Junction Box

016463007
10061037-0102: RNCC: 3 | RNVC: 2
10061037: RNCC: D | RNVC: 9

17 Jul 2015

5975-01-644-0658
Electrical Equipment Rack

016440658
11018G0330: RNCC: 3 | RNVC: 2

21 Apr 2015

5975-01-642-4751
Metallic Raceway Assembly

016424751
514382: RNCC: 3 | RNVC: 2

26 Feb 2015

5975-01-641-1337
Electrical Equipment Mounting Base

016411337
037846: RNCC: 3 | RNVC: 2

9 Jan 2015

5975-01-634-0580
Electrical Sliding Shelf

016340580
1USHL-112-20: RNCC: 3 | RNVC: 9
11027C2810: RNCC: 5 | RNVC: 2

15 Dec 2014

5975-01-632-2617
Cable Hanger

016322617
512717: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2603
Cable Hanger

016322603
11018G0001: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2602
Cable Hanger

016322602
512240: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2584
Metallic Raceway Assembly

016322584
512766: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-631-9766
Blank Panel

016319766
10006417: RNCC: 3 | RNVC: 2

2 Oct 2014

5975-01-630-8872
Flexible Nonmetallic Conduit

016308872
CLT150F-D20: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-630-8798
Flexible Nonmetallic Conduit

016308798
CLT50F-C20: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-630-7860
Electrical Components Tie Down Strap

016307860
EP-11-50-0-D: RNCC: 3 | RNVC: 2
10KP451: RNCC: 7 | RNVC: 2

19 Aug 2014

5975-01-630-6886
Chassis Base

016306886
H302A021-01: RNCC: 3 | RNVC: 2

13 Aug 2014

5975-01-630-5959
Electrical Cable Assembly Protector

016305959
12566064: RNCC: 3 | RNVC: 2

11 Aug 2014

5975-01-630-3262
Electronic Equipment Mounting Tray

016303262
12566154: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-630-3245
Electronic Equipment Mounting Tray

016303245
12566648: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-630-3232
Electrical-Electronic Equipment Panel

016303232
12566086: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-630-3233
Electrical Equipment Shelf

016303233
12565934: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-629-8271
Electrical Equipment Shelf

016298271
12565973: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8250
Electrical-Electronic Equipment Chassis

016298250
12565945: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8251
Electrical-Electronic Equipment Chassis

016298251
12565943: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8249
Electrical-Electronic Equipment Chassis

016298249
12565946: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-628-6673
Electrical Equipment Rack

016286673
10-2834442-1: RNCC: 3 | RNVC: 2
MC-106B: RNCC: 5 | RNVC: 1

5 Jun 2014

5975-01-627-7574
Electrical Equipment Shelf

016277574
3912881: RNCC: 3 | RNVC: 2
3912881: RNCC: 5 | RNVC: 9

25 Apr 2014

5975-01-627-7568
Electrical Equipment Shelf

016277568
3915284: RNCC: 3 | RNVC: 2
3915284: RNCC: 5 | RNVC: 9

25 Apr 2014

5975-01-626-9095
Electrical Components Tie Down Strap

016269095
T18R0: RNCC: 3 | RNVC: 2

25 Mar 2014

5975-01-625-9224
Electrical Wall Plate

016259224
10012145: RNCC: 3 | RNVC: 2

20 Feb 2014

5975-01-625-1488
Electrical Equipment Mounting Base

016251488
11018F0194: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1482
Metallic Raceway Assembly

016251482
11018G0339: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1470
Electrical Equipment Shelf

016251470
11018G0324: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1466
Electrical Equipment Leg

016251466
11018G0325: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1460
Rigid Metal Conduit

016251460
JKLSLR100: RNCC: 3 | RNVC: 2
517230: RNCC: 7 | RNVC: 2

27 Jan 2014

5975-01-623-8393
Interconnecting Box

016238393
WPBD452: RNCC: 3 | RNVC: 9
10002521: RNCC: 5 | RNVC: 2

4 Dec 2013

5975-01-618-4455
Electrical Cable Nipple

016184455
487N8V14: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-618-4357
Insulator Bracket

016184357
4003220: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-617-6712
Junction Box

016176712
330-0109-000: RNCC: 3 | RNVC: 2

29 Mar 2013

5975-01-617-1075
Flexible Nonmetallic Conduit

016171075
92N3682: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-0154
Rigid Metal Conduit

016170154
7126K12: RNCC: 3 | RNVC: 2

7 Mar 2013

5975-01-616-5806
Electrical Equipment Mounting Base

016165806
SRC2198-4: RNCC: 3 | RNVC: 2
SRC2198-4: RNCC: 7 | RNVC: 2

20 Feb 2013

5975-01-616-1364
Electrical Wall Plate

016161364
12566405: RNCC: 3 | RNVC: 2

4 Feb 2013

5975-01-615-8488
Flexible Metal Conduit

016158488
73145K3: RNCC: 3 | RNVC: 2
73145K3: RNCC: 3 | RNVC: 2

24 Jan 2013

5975-01-614-0552
Electrical Grounding Plate

016140552
12566494: RNCC: 3 | RNVC: 2

26 Nov 2012

5975-01-613-0589
Electrical-Electronic Equipment Chassis

016130589
OT-DTCR-2: RNCC: 3 | RNVC: 2
H469729-1: RNCC: 3 | RNVC: 2

29 Oct 2012

5975-01-608-6528
Electrical Cable Protector

016086528
10014B0529: RNCC: 3 | RNVC: 2

6 Jul 2012

5975-01-608-6527
Electrical Cable Protector

016086527
10014B0017: RNCC: 3 | RNVC: 2

6 Jul 2012

5975-01-608-6526
Electrical Cable Protector

016086526
10014B0530: RNCC: 3 | RNVC: 2

6 Jul 2012

5975-01-607-6851
Metallic Raceway

016076851
3838579C1: RNCC: 3 | RNVC: 2

12 Jun 2012

5975-01-605-7776
Electrical Cable Protector

016057776
4296813: RNCC: 3 | RNVC: 2
4296813: RNCC: 5 | RNVC: 2

25 Apr 2012

5975-01-603-8531
Electrical Cable Protector

016038531
40810019: RNCC: 3 | RNVC: 2
40810019: RNCC: 3 | RNVC: 9
40810019: RNCC: 5 | RNVC: 2

19 Mar 2012

5975-01-603-2145
Raceway Cover

016032145
40930004: RNCC: 3 | RNVC: 2
40930004: RNCC: 5 | RNVC: 9

24 Feb 2012

5975-01-602-7768
Cable Hanger

016027768
10009598: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-602-6419
Electrical Equipment Rack

016026419
4296579: RNCC: 3 | RNVC: 2
4296579: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-602-6414
Electrical Equipment Rack

016026414
4297741: RNCC: 3 | RNVC: 2
4297741: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-602-6402
Electrical Equipment Rack

016026402
4308828: RNCC: 3 | RNVC: 2
4308828: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-602-6388
Electrical Equipment Rack

016026388
4297724: RNCC: 3 | RNVC: 2
4297724: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-601-8044
Electrical-Electronic Equipment Panel

016018044
04-2816538-1: RNCC: 3 | RNVC: 2

25 Jan 2012

5975-01-601-1840
Ground Rod

016011840
13162: RNCC: 3 | RNVC: 2
13162B: RNCC: 5 | RNVC: 9
13162: RNCC: 5 | RNVC: 9

11 Jan 2012

5975-01-601-0847
Metallic Raceway Assembly

016010847
1F-7854: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-600-6849
Metallic Raceway

016006849
3689933C3: RNCC: 3 | RNVC: 2

14 Dec 2011

5975-01-600-5369
Cable Strain Relief Bushing

016005369
S2121: RNCC: 3 | RNVC: 2

7 Dec 2011

5975-01-600-1500
Electrical Components Tie Down Strap

016001500
63461: RNCC: 3 | RNVC: 2
10010750: RNCC: 7 | RNVC: 2
S000193: RNCC: D | RNVC: 9

10 Nov 2011

5975-01-599-9053
Junction Box

015999053
2203-800-002: RNCC: 3 | RNVC: 9
2202-900-002427: RNCC: D | RNVC: 9

27 Oct 2011

5975-01-598-9797
Conduit Outlet Cover

015989797
10034699: RNCC: 3 | RNVC: 2

7 Sep 2011

5975-01-598-9786
Conduit Outlet

015989786
10034700: RNCC: 3 | RNVC: 2

7 Sep 2011

5975-01-598-5668
Electrical Tie Down Mounting Base

015985668
TM3-X2: RNCC: 3 | RNVC: 2
3614752C1: RNCC: 5 | RNVC: 2
3614752C1: RNCC: 5 | RNVC: 2

12 Aug 2011

5975-01-597-6571
Electrical Equipment Drawer

015976571
D2: RNCC: 3 | RNVC: 9

20 Jun 2011

5975-01-597-6453
Electrical-Electronic Equipment Chassis

015976453
4305611: RNCC: 3 | RNVC: 2
4305611: RNCC: 5 | RNVC: 2

17 Jun 2011

5975-01-597-5074
Electrical Tie Down Mounting Base

015975074
HDM250HIRC2: RNCC: 3 | RNVC: 2
10062209: RNCC: 7 | RNVC: 2

10 Jun 2011

5975-01-596-7461
Electrical Components Tie Down Strap

015967461
7130K31: RNCC: 3 | RNVC: 2
7130K31: RNCC: 5 | RNVC: 2

24 May 2011

5975-01-594-0982
Electrical Components Tie Down Strap

015940982
473321C1: RNCC: 3 | RNVC: 2
PT08-28991: RNCC: D | RNVC: 9

22 Apr 2011

5975-01-591-9775
Junction Box Assembly

015919775
H378882-1: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9511
Electrical-Electronic Equipment Panel

015919511
513336: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9494
Electrical Cable Assembly Protector

015919494
513207: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9490
Electrical Equipment Shelf

015919490
513203: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9489
Electrical Equipment Shelf

015919489
513204: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9485
Electrical Equipment Leg

015919485
513198: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9484
Electrical Equipment Shelf

015919484
513202: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9488
Electrical Equipment Leg

015919488
513199: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9487
Electrical Equipment Leg

015919487
513200: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-3825
Electrical Cable Protector

015913825
4308763: RNCC: 3 | RNVC: 2
4308763: RNCC: 5 | RNVC: 2

24 Jan 2011

5975-01-590-5424
Electrical Equipment Mounting Base

015905424
12050-3000-01: RNCC: 3 | RNVC: 2

9 Dec 2010

5975-01-589-6466
Electrical Tie Down Mounting Base

015896466
CB3019A3N750: RNCC: 3 | RNVC: 2
3684463: RNCC: 7 | RNVC: 2
3684463: RNCC: 7 | RNVC: 9

1 Nov 2010

5975-01-589-4340
Junction Box

015894340
4007690: RNCC: 3 | RNVC: 2

26 Oct 2010

5975-01-588-6200
Electrical Conduit Adapter

015886200
SAEJ5148-6140139C: RNCC: 3 | RNVC: 2
SAEJ5148-6140139C: RNCC: 5 | RNVC: 2
SAEJ5148-6140139C: RNCC: 5 | RNVC: 9

27 Sep 2010

5975-01-587-6287
Electrical Tie Down Mounting Base

015876287
TD-175-12ZI: RNCC: 3 | RNVC: 2
TD-175-12Z1: RNCC: 5 | RNVC: 9

13 Aug 2010

5975-01-587-4453
Electrical Tie Down Mounting Base

015874453
MT2023007CST: RNCC: 3 | RNVC: 2
3570838C1: RNCC: 5 | RNVC: 2
3570838C1: RNCC: 5 | RNVC: 9

6 Aug 2010

5975-01-587-3246
Electrical Equipment Mounting Base

015873246
3688757C3: RNCC: 3 | RNVC: 2
3688757C2: RNCC: 5 | RNVC: 9
3688757C2L: RNCC: 5 | RNVC: 9

3 Aug 2010

5975-01-587-2606
Junction Box

015872606
10005666: RNCC: 3 | RNVC: 2

29 Jul 2010

5975-01-586-9888
Stuffing Tube

015869888
4305545: RNCC: 3 | RNVC: 2
4305545: RNCC: 5 | RNVC: 2

21 Jul 2010

5975-01-586-9590
Electric Wall Plate

015869590
4305528: RNCC: 3 | RNVC: 2
4305528: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-9597
Electronic Equipment Mounting Tray

015869597
4305614: RNCC: 3 | RNVC: 2
4305614: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-9588
Electrical Wall Plate

015869588
4305475: RNCC: 3 | RNVC: 2
4305475: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-9587
Electronic Equipment Mounting Tray

015869587
4297348: RNCC: 3 | RNVC: 2
4297348: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-8616
Interconnecting Box

015868616
MCL-1291-0227: RNCC: 3 | RNVC: 2
29KP413: RNCC: 7 | RNVC: 2

16 Jul 2010

5975-01-583-8048
Electrical Tie Down Mounting Base

015838048
ABMM-AT-C0: RNCC: 3 | RNVC: 2
644-ABMM-AT-C0: RNCC: 5 | RNVC: 2
79DH391-00: RNCC: 5 | RNVC: 2
ABMM-AT-CO: RNCC: 5 | RNVC: 9

7 Apr 2010

5975-01-581-4983
Junction Box

015814983
2423054: RNCC: 3 | RNVC: 2

20 Jan 2010

5975-01-579-8340
Electrical Conduit Ferrule Anchor Plate

015798340
415321: RNCC: 3 | RNVC: 2

24 Nov 2009

5975-01-578-6278
Cable Collar

015786278
3835736C1: RNCC: 3 | RNVC: 2

14 Oct 2009

5975-01-577-8879
Junction Box

015778879
4003219: RNCC: 3 | RNVC: 2

22 Sep 2009

5975-01-577-7355
Electrical-Electronic Equipment Panel

015777355
10000721: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-577-7353
Electrical Components Tie Down Strap

015777353
63475: RNCC: 3 | RNVC: 2
12759-00869: RNCC: C | RNVC: 1

16 Sep 2009

5975-01-577-5397
Electrical-Electronic Equipment Panel

015775397
10000723: RNCC: 3 | RNVC: 2

10 Sep 2009

5975-01-577-4775
Electrical-Electronic Equipment Panel

015774775
10003062: RNCC: 3 | RNVC: 2

8 Sep 2009

5975-01-577-2387
Electrical Equipment Mounting Base

015772387
3829416: RNCC: 3 | RNVC: 2
3829416: RNCC: 5 | RNVC: 9

31 Aug 2009

5975-01-576-7363
Electrical Equipment Mounting Base

015767363
4293944: RNCC: 3 | RNVC: 2
4293944: RNCC: 5 | RNVC: 2

12 Aug 2009

5975-01-576-5279
Electrical Equipment Shelf

015765279
4293922: RNCC: 3 | RNVC: 2
4293922: RNCC: 5 | RNVC: 2

5 Aug 2009

5975-01-576-5281
Electrical Equipment Shelf

015765281
4293923: RNCC: 3 | RNVC: 2
4293923: RNCC: 5 | RNVC: 2

5 Aug 2009

NSN 5975-01-576-1086 015761086 STRAP,SAFETY,WIRE STRAND HANGER

5975-01-576-1086
Wire Strand Hanger Safety Strap

015761086
MS20995-C32: RNCC: 3 | RNVC: 9

21 Jul 2009

5975-01-576-0920
Electrical Equipment Rack

015760920
4296646: RNCC: 3 | RNVC: 2
4296646: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0867
Electrical Cable Protector

015760867
4297632: RNCC: 3 | RNVC: 2
4297632: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0548
Electrical Cable Protector

015760548
4297380: RNCC: 3 | RNVC: 2
4297380: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0540
Electrical Cable Protector

015760540
4296573: RNCC: 3 | RNVC: 2
4296573: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0541
Electrical Cable Protector

015760541
4297379: RNCC: 3 | RNVC: 2
4297379: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0542
Electrical Cable Protector

015760542
4297378: RNCC: 3 | RNVC: 2
4297378: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0337
Electrical Equipment Rack

015760337
4296577: RNCC: 3 | RNVC: 2
4296577: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-575-8519
Electrical-Electronic Equipment Chassis

015758519
A3210915-3: RNCC: 3 | RNVC: 2
A3210915: RNCC: D | RNVC: 9

15 Jul 2009

5975-01-575-4161
Electrical-Electronic Equipment Panel

015754161
802025334320-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-571-2189
Electrical Equipment Rack

015712189
4293920: RNCC: 3 | RNVC: 2
4293920: RNCC: 5 | RNVC: 2

28 Jan 2009

5975-01-568-7356
Electrical-Electronic Equipment Chassis

015687356
3113869C91: RNCC: 3 | RNVC: 2

7 Nov 2008

5975-01-568-6430
Electrical Cable Protector

015686430
3826282C2L: RNCC: 3 | RNVC: 2
3113411C1L: RNCC: 5 | RNVC: 9

8 Sep 2010

5975-01-566-6024
Electrical Equipment Shelf

015666024
3686306C1: RNCC: 3 | RNVC: 2
3686306C1L: RNCC: 5 | RNVC: 9

4 Sep 2008

5975-01-565-2217
Electrical Box Connector

015652217
3326: RNCC: 3 | RNVC: 2

16 Jul 2008

5975-01-564-0910
Flexible Metal Conduit Assembly

015640910
260A809-7: RNCC: 3 | RNVC: 2
740NC102NFH111H111-12-72: RNCC: 5 | RNVC: 2

4 Jun 2008

5975-01-564-0705
Flexible Metal Conduit Assembly

015640705
260A808-10: RNCC: 3 | RNVC: 2
749NC691NFT10H25A40-72: RNCC: 5 | RNVC: 2

3 Jun 2008

5975-01-564-0594
Flexible Metal Conduit Assembly

015640594
260A808-9: RNCC: 3 | RNVC: 2
749NC691NFT08H25A32-72: RNCC: 5 | RNVC: 2

3 Jun 2008

5975-01-560-4736
Guide Rail

015604736
0415 1882: RNCC: 3 | RNVC: 2

31 Jan 2008

5975-01-559-8238
Electronic Equipment Mounting Tray

015598238
3014-0019-03-3: RNCC: 3 | RNVC: 2
3014-0019-03-1: RNCC: 5 | RNVC: 9

8 Jan 2008

5975-01-559-8215
Electronic Equipment Mounting Tray

015598215
3014-0020-03-2: RNCC: 3 | RNVC: 2
3014-0020-03-1: RNCC: 5 | RNVC: 9

8 Jan 2008

5975-01-558-1008
Cable Hanger

015581008
1001727: RNCC: 3 | RNVC: 2

1 Nov 2007

5975-01-557-0694
Electrical-Electronic Equipment Chassis

015570694
1002457: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-556-5811
Electrical Equipment Rack

015565811
3113151C92: RNCC: 3 | RNVC: 2
3141000: RNCC: 5 | RNVC: 2
3113151C91L: RNCC: 5 | RNVC: 9
3113151C92L: RNCC: 5 | RNVC: 9
3113151C92L: RNCC: 5 | RNVC: 9

3 Oct 2007

5975-01-556-4150
Right Cable Tray

015564150
4285079: RNCC: 3 | RNVC: 2
4285079: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-555-9887
Electrical Equipment Rack Base

015559887
7185152-54: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-555-9889
Electrical Equipment Rack Base

015559889
7185152-55: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-555-5973
Chassis Air System

015555973
3701424: RNCC: 3 | RNVC: 2
3701424: RNCC: 5 | RNVC: 9

7 Sep 2007

5975-01-555-5769
Conduit Outlet

015555769
3698268: RNCC: 3 | RNVC: 2
3698268: RNCC: 5 | RNVC: 9

7 Sep 2007

5975-01-555-5767
Conduit Outlet

015555767
3698264: RNCC: 3 | RNVC: 2
3698264: RNCC: 5 | RNVC: 9

7 Sep 2007

5975-01-554-3780
Electrical-Electronic Equipment Chassis

015543780
A3179881-1: RNCC: 3 | RNVC: 2
PLA3179881: RNCC: D | RNVC: 9
A3179881: RNCC: D | RNVC: 9

7 Aug 2007

5975-01-548-4294
Electrical Components Tie Down Strap

015484294
A3184330: RNCC: 3 | RNVC: 2

22 Feb 2007

5975-01-547-3797
Electrical Tie Down Mounting Base

015473797
8409-0386: RNCC: 3 | RNVC: 9
8409-0386: RNCC: 5 | RNVC: 2
30295-1000: RNCC: D | RNVC: 9

18 Jan 2007

5975-01-547-2847
Electrical Tie Down Mounting Base

015472847
81N2596: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-547-2529
Electrical Tie Down Mounting Base

015472529
TA1S8-MO: RNCC: 3 | RNVC: 2
30295-1910: RNCC: D | RNVC: 9

16 Jan 2007

5975-01-544-6768
Electrical Equipment Rack

015446768
2571-GG5D-003: RNCC: 3 | RNVC: 2
2571-GG5A-003: RNCC: 5 | RNVC: 9
2571-GG5A-003: RNCC: C | RNVC: 1

19 Oct 2006

5975-01-544-3616
Metallic Raceway

015443616
0287-GG3-023: RNCC: 3 | RNVC: 9
0287-GG3-023: RNCC: C | RNVC: 1

11 Oct 2006

5975-01-542-1357
Interconnecting Box

015421357
92-3603: RNCC: 3 | RNVC: 2
98-5656: RNCC: 5 | RNVC: 9

24 Jul 2006

5975-01-541-1591
Electrical Cable Protector

015411591
0636-GG5-J10: RNCC: 3 | RNVC: 9
0636-GG5-J10: RNCC: C | RNVC: 1

16 Jun 2006

5975-01-541-1589
Electrical Cable Protector

015411589
0636-GG5-J09: RNCC: 3 | RNVC: 9
0636-GG5-J09: RNCC: C | RNVC: 1

16 Jun 2006

5975-01-541-1581
Electrical Cable Protector

015411581
0636-GG5-J07: RNCC: 3 | RNVC: 2
0636-GG5-J07: RNCC: 3 | RNVC: 9

16 Jun 2006

5975-01-541-1571
Electrical Cable Protector

015411571
0636-GG5-J06: RNCC: 3 | RNVC: 2
0636-GG5-J06: RNCC: 3 | RNVC: 9

16 Jun 2006

5975-01-541-1294
Cable Terminal Chamber

015411294
0636-GG5-F01: RNCC: 3 | RNVC: 2
0636-GG5-F01: RNCC: 3 | RNVC: 9
0636-GG5-F01: RNCC: 5 | RNVC: 2

15 Jun 2006

5975-01-540-8800
Flexible Nonmetallic Conduit

015408800
M1883008: RNCC: 3 | RNVC: 9
2KP898: RNCC: 5 | RNVC: 9
M1883008: RNCC: 5 | RNVC: 9
2KP898: RNCC: 7 | RNVC: 2

7 Jun 2006

5975-01-540-8809
Flexible Nonmetallic Conduit

015408809
M1883007: RNCC: 3 | RNVC: 9
2KP899: RNCC: 5 | RNVC: 9
M1883007: RNCC: 5 | RNVC: 9
2KP899: RNCC: 7 | RNVC: 2

7 Jun 2006

5975-01-540-3399
Junction Box

015403399
174235: RNCC: 3 | RNVC: 2
174235: RNCC: 5 | RNVC: 2

16 May 2006

5975-01-534-5790
Terminal Cover Cable Chamber

015345790
C1.5WH6: RNCC: 3 | RNVC: 2
34518-17: RNCC: D | RNVC: 9

26 Oct 2005

5975-01-532-8076
Electrical-Electronic Equipment Chassis

015328076
G583103-1: RNCC: 3 | RNVC: 2
G583103-1: RNCC: 5 | RNVC: 2

22 Aug 2005

5975-01-532-1067
Electrical Components Tie Down Strap

015321067
017-00146: RNCC: 3 | RNVC: 2

28 Jul 2005

5975-01-530-6456
Electronic Equipment Mounting Tray

015306456
902663-803: RNCC: 3 | RNVC: 2

7 Jun 2005

5975-01-527-1408
Chassis Base

015271408
100-008421-G004: RNCC: 3 | RNVC: 2
100-008421-G001: RNCC: 5 | RNVC: 9
100-008421-G002: RNCC: 5 | RNVC: 9

21 Jan 2005

5975-01-527-1413
Chassis Base

015271413
100-013945-P001: RNCC: 3 | RNVC: 2
9076-00A: RNCC: 5 | RNVC: 2
100-008380-P001: RNCC: 5 | RNVC: 9

21 Jan 2005

5975-01-526-4916
Flexible Metal Conduit

015264916
78801: RNCC: 3 | RNVC: 2

20 Dec 2004

5975-01-526-4921
Flexible Metal Conduit

015264921
78832: RNCC: 3 | RNVC: 2

20 Dec 2004

5975-01-518-3292
Electronic Equipment Mounting Tray

015183292
7593370: RNCC: 3 | RNVC: 2
SWT0001100: RNCC: 5 | RNVC: 9
PSC0000000159: RNCC: 5 | RNVC: 9
233-571: RNCC: 5 | RNVC: 9

9 Mar 2004

5975-01-517-1766
Electrical Equipment Mounting Base

015171766
RF-5073VSM: RNCC: 3 | RNVC: 2
RF-5073VSM: RNCC: 5 | RNVC: 2
RF-5073VSM: RNCC: 5 | RNVC: 9
5975PL1611931: RNCC: 6 | RNVC: 9

31 Jan 2004

5975-01-513-4184
Cushion Clamp

015134184
14-02043: RNCC: 3 | RNVC: 2
14-02043: RNCC: 3 | RNVC: 9
14-02043: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-512-7804
Flexible Metal Conduit Assembly

015127804
CA00884-2K4WL4W00210: RNCC: 3 | RNVC: 2
CA00884-2K4WL4W00210: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-7800
Flexible Metal Conduit Assembly

015127800
CA00884-2E4WL4W00260: RNCC: 3 | RNVC: 2
CA00884-2E4WL4W00260: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-504-7746
Electrical Equipment Mounting Base

015047746
902220-801: RNCC: 3 | RNVC: 2
MT-7168/ARC-231(V)(C): RNCC: 5 | RNVC: 1

7 Feb 2003

5975-01-504-5483
Electrical Equipment Mounting Base

015045483
200-85099-101: RNCC: 3 | RNVC: 2
247-1027-010: RNCC: 5 | RNVC: 9
247-1027-010: RNCC: 7 | RNVC: 2

31 Jan 2003

5975-01-499-8654
Electrical Tie Down Mounting Base

014998654
CB3019AA3N: RNCC: 3 | RNVC: 2
7081542: RNCC: 5 | RNVC: 2
7079345: RNCC: 5 | RNVC: 2

6 Aug 2002

5975-01-495-3421
Electrical Components Tie Down Strap

014953421
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-1-9: RNCC: 3 | RNVC: 2
AS33671-1-9: RNCC: 3 | RNVC: 9

13 Mar 2002

5975-01-494-9125
Chassis Base

014949125
H302A024: RNCC: 3 | RNVC: 2
VA-016309-0002: RNCC: 5 | RNVC: 2
124975: RNCC: 5 | RNVC: 2

27 Feb 2002

5975-01-493-6209
Electrical Conduit Locknut

014936209
863-000748: RNCC: 3 | RNVC: 2
NN-29-BR: RNCC: 5 | RNVC: 2
NN-29-BK: RNCC: 5 | RNVC: 9

11 Jan 2002

5975-01-491-0479
Knockout Reducing Washer

014910479
PP-050: RNCC: 3 | RNVC: 2

11 Oct 2001

5975-01-490-7033
Electrical Equipment Rack

014907033
A3274023-3: RNCC: 3 | RNVC: 2

4 Oct 2001

5975-01-488-6198
Flexible Nonmetallic Conduit

014886198
12339351-2: RNCC: 3 | RNVC: 2

29 Aug 2001

5975-01-487-8248
Electrical Components Tie Down Strap

014878248
11567533: RNCC: 3 | RNVC: 2

20 Aug 2001

5975-01-484-7337
Rigid Metal Conduit

014847337
9238990905: RNCC: 3 | RNVC: 2
923899.0905: RNCC: 5 | RNVC: 2
923828.0925: RNCC: 5 | RNVC: 9

7 May 2001

5975-01-484-2793
Electrical-Electronic Equipment Chassis

014842793
VA-016753-0002: RNCC: 3 | RNVC: 2

24 Apr 2001

5975-01-481-6821
Cable Strain Relief Bushing

014816821
863-000518: RNCC: 3 | RNVC: 2
02171: RNCC: 3 | RNVC: 2
CD16NA-BK-N-O: RNCC: 3 | RNVC: 2
69915K57: RNCC: 5 | RNVC: 2
69915K57: RNCC: 5 | RNVC: 2

19 Jan 2001

5975-01-481-5123
Junction Box

014815123
863-000500: RNCC: 3 | RNVC: 2
2IH7S2-1: RNCC: 5 | RNVC: 2
LTX11-7: RNCC: 5 | RNVC: 9
58371-1/2: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-4977
Electrical Components Tie Down Strap

014814977
863-000523: RNCC: 3 | RNVC: 2
31000-542: RNCC: 3 | RNVC: 2
7130K56: RNCC: 5 | RNVC: 2
9-00004545: RNCC: 5 | RNVC: 9
2202-900-003676: RNCC: D | RNVC: 9

10 Jan 2001

5975-01-481-4499
Electrical Cable Protector

014814499
CLT50N-C630: RNCC: 3 | RNVC: 2
863-000670: RNCC: 5 | RNVC: 9

9 Jan 2001

5975-01-480-5616
Cable Hanger

014805616
9214370001: RNCC: 3 | RNVC: 2
921437.0001: RNCC: 5 | RNVC: 2

27 Nov 2000

5975-01-475-3814
Electrical Box Connector

014753814
712HS277NF1520-31: RNCC: 3 | RNVC: 2
712-277: RNCC: D | RNVC: 9

2 Jun 2000

5975-01-474-7487
Electrical Cable Nipple

014747487
R78063: RNCC: 3 | RNVC: 9

11 May 2000

5975-01-471-9490
Strain Electrical Conductor Clamp

014719490
30-302-1D06G03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-4579
Guide Rail

014714579
1207667: RNCC: 3 | RNVC: 2

3 Feb 2000

5975-01-470-0371
Flexible Metal Conduit

014700371
74525K82: RNCC: 3 | RNVC: 2
74525K82: RNCC: 5 | RNVC: 2

6 Dec 1999

5975-01-467-5849
Electronic Equipment Mounting Tray

014675849
69-00760-002: RNCC: 3 | RNVC: 2
69-00760-001: RNCC: 3 | RNVC: 2
MX-11918/USC-62(V)(C): RNCC: 5 | RNVC: 2

3 Sep 1999

5975-01-465-9074
Electrical-Electronic Equipment Chassis

014659074
E-MCC-1600: RNCC: 3 | RNVC: 9

25 Jun 1999

5975-01-465-1268
Electrical Equipment Mounting Base

014651268
822-1479-001: RNCC: 3 | RNVC: 2

21 May 1999

5975-01-457-7895
Electrical-Electronic Equipment Chassis

014577895
0N616724-1: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-457-7762
Electrical-Electronic Equipment Panel

014577762
0N616772-3: RNCC: 3 | RNVC: 2
0N616722-2: RNCC: 5 | RNVC: 2
0N616722-1: RNCC: 5 | RNVC: 2

3 Aug 1998

5975-01-457-0854
Electrical-Electronic Equipment Chassis

014570854
0N616717-1: RNCC: 3 | RNVC: 2

10 Jul 1998

5975-01-457-0148
Electrical-Electronic Equipment Panel

014570148
0N616715-1: RNCC: 3 | RNVC: 2

7 Jul 1998

5975-01-454-6916
Junction Box

014546916
A404DSC: RNCC: 3 | RNVC: 2

9 Apr 1998

5975-01-452-7801
Electronic Junction Rack

014527801
36025800: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-01-451-4192
Electrical Equipment Rack

014514192
A3193434-1: RNCC: 3 | RNVC: 2

16 Dec 1997

5975-01-448-8894
Junction Box

014488894
P0614-2608-4: RNCC: 3 | RNVC: 2
5-15-18999: RNCC: 5 | RNVC: 9

12 Sep 1997

5975-01-446-0862
Junction Box Cover

014460862
181A358-1: RNCC: 3 | RNVC: 2

21 Jun 1997

5975-01-442-1230
Nonmetallic Raceway

014421230
G2X1LG6: RNCC: 3 | RNVC: 2
E2X1LG6: RNCC: 5 | RNVC: 9

5 Mar 1997

5975-01-438-6015
Junction Box

014386015
A806SC: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-435-1448
Flexible Metal Conduit

014351448
M24758/1-06: RNCC: 2 | RNVC: 2
MIL-C-24758/1: RNCC: 4 | RNVC: 1

15 Aug 1996

5975-01-434-1773
Strain Relief Grip

014341773
7HE487: RNCC: 3 | RNVC: 2
6702554: RNCC: 5 | RNVC: 2
7HE487: RNCC: 5 | RNVC: 9
073031204: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-431-4347
Blank Panel

014314347
MS14129-14: RNCC: 2 | RNVC: 2

13 May 1996

5975-01-431-4131
Electronic Equipment Mounting Tray

014314131
938668-801: RNCC: 3 | RNVC: 2

13 May 1996

5975-01-431-3657
Nonmetallic Raceway

014313657
LD5IW6-A: RNCC: 3 | RNVC: 2

11 May 1996

5975-01-422-3449
Cable Spacer

014223449
12364768: RNCC: 3 | RNVC: 2
12364768: RNCC: 5 | RNVC: 2

30 Nov 1995

5975-01-420-8385
Ground Rod

014208385
K2-12CS: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-420-8383
Ground Rod

014208383
K2-10CS: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-420-8384
Ground Rod

014208384
K2L-20CS: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-420-7309
Ground Rod

014207309
K2-2-10CS: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-420-7310
Ground Rod

014207310
K2L-12CS: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-420-7308
Ground Rod

014207308
K2-20CS: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-420-6821
Ground Rod

014206821
K2-40CS: RNCC: 3 | RNVC: 2

23 Oct 1995

5975-01-420-2700
Electrical-Electronic Equipment Panel

014202700
084835: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
084835: RNCC: 5 | RNVC: 9

12 Oct 1995

5975-01-418-8330
Flexible Nonmetallic Conduit

014188330
E22401A-000000: RNCC: 3 | RNVC: 2

7 Sep 1995

5975-01-413-0605
Electrical Box Connector

014130605
LT 501: RNCC: 3 | RNVC: 2
APC050: RNCC: 5 | RNVC: 9

4 May 1995

5975-01-412-9096
Conduit Outlet

014129096
E984H: RNCC: 3 | RNVC: 9
E984H: RNCC: 5 | RNVC: 1
12416381: RNCC: D | RNVC: 9

1 May 1995

5975-01-409-1354
Rigid Metal Conduit Assembly

014091354
115384-02-33.38: RNCC: 3 | RNVC: 9
757NA001B08-33.38: RNCC: 5 | RNVC: 2
841819-35: RNCC: 5 | RNVC: 9
115384-02-33.38: RNCC: C | RNVC: 1
841819: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-406-3395
Electrical Equipment Mounting Base

014063395
500176: RNCC: 3 | RNVC: 2
LL-H36-2041: RNCC: 5 | RNVC: 1

30 Dec 1994

5975-01-406-3332
Electrical Equipment Cabinet Case

014063332
500285: RNCC: 3 | RNVC: 2
LL-H36-2023: RNCC: 5 | RNVC: 1

30 Dec 1994

5975-01-406-3324
Electrical-Electronic Equipment Chassis

014063324
500297: RNCC: 3 | RNVC: 2
LL-H36-2017: RNCC: 5 | RNVC: 1

30 Dec 1994

5975-01-398-5840
Electrical Components Tie Down Strap

013985840
MS3368-3-9A: RNCC: 2 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9

5 Nov 1994

5975-01-398-1886
Conduit Outlet

013981886
T150-M: RNCC: 3 | RNVC: 9
T150-M: RNCC: 5 | RNVC: 2

26 Oct 1994

5975-01-394-4049
Electrical Box Connector

013944049
8406: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-390-1498
Electrical Cable Nipple

013901498
202S132-25S-0: RNCC: 3 | RNVC: 2
202S132-25S: RNCC: 5 | RNVC: 2
10567836-2: RNCC: 5 | RNVC: 2

12 May 1994

5975-01-388-0115
Electrical-Electronic Equipment Panel

013880115
10-0488: RNCC: 3 | RNVC: 2
LL-H36-5559: RNCC: 5 | RNVC: 1

17 Mar 1994

5975-01-387-7511
Transit Frame

013877511
S-4: RNCC: 3 | RNVC: 2
S-4: RNCC: 5 | RNVC: 9

11 Mar 1994

5975-01-386-6985
Electrical-Electronic Equipment Chassis

013866985
H314A003-107: RNCC: 3 | RNVC: 2

11 Feb 1994

5975-01-386-0882
Electrical-Electronic Equipment Chassis

013860882
903146-1: RNCC: 3 | RNVC: 9
903146: RNCC: D | RNVC: 9

27 Jan 1994

5975-01-385-8686
Electrical Cable Nipple

013858686
222S152-25C-0: RNCC: 3 | RNVC: 2
10567835-4: RNCC: 5 | RNVC: 2
222S152-25S: RNCC: 5 | RNVC: 9
222S152-25S-0: RNCC: 5 | RNVC: 9

21 Jan 1994

5975-01-385-7622
Flexible Nonmetallic Conduit

013857622
HCTE-0375-0-SP: RNCC: 3 | RNVC: 2
120-112-12B: RNCC: 5 | RNVC: 2
HCTE-0375-0: RNCC: 5 | RNVC: 9

18 Jan 1994

5975-01-385-6781
Electrical-Electronic Equipment Chassis

013856781
676-0764-001: RNCC: 3 | RNVC: 2

16 Jan 1994

5975-01-384-6063
Junction Box Cover

013846063
52-C-0: RNCC: 3 | RNVC: 2

18 Dec 1993

5975-01-382-9350
Electrical-Electronic Equipment Chassis

013829350
400686-001C: RNCC: 3 | RNVC: 2
LL-H36-4588: RNCC: 5 | RNVC: 1

12 Nov 1993

5975-01-382-7955
Electrical Cable Nipple

013827955
222S132-25C-0: RNCC: 3 | RNVC: 2
222S132-25S: RNCC: 5 | RNVC: 9
10567835-2: RNCC: 5 | RNVC: 9

9 Nov 1993

5975-01-381-8910
Electrical-Electronic Equipment Chassis

013818910
6405847N03: RNCC: 3 | RNVC: 9
6405847N03: RNCC: 5 | RNVC: 2
64-5847N03: RNCC: 5 | RNVC: 9

23 Oct 1993

5975-01-379-8325
Junction Box

013798325
12351409: RNCC: 3 | RNVC: 2

8 Sep 1993

5975-01-374-1863
Electrical Equipment Shelf

013741863
K1091500-1220G1500IRRIDITE: RNCC: 3 | RNVC: 2
KX1009: RNCC: 3 | RNVC: 2
721141-3: RNCC: 7 | RNVC: 2

17 Apr 1993

5975-01-372-3404
Electrical Components Tie Down Strap

013723404
53064-7: RNCC: 3 | RNVC: 2
868188-0007: RNCC: 5 | RNVC: 9
868188-0007: RNCC: C | RNVC: 1

6 Mar 1993

5975-01-372-0978
Electrical Equipment Mounting Base

013720978
94956-991: RNCC: 3 | RNVC: 9
6850001-441: RNCC: 5 | RNVC: 2
6850001-441: RNCC: 5 | RNVC: 9
6850001-441: RNCC: 5 | RNVC: 9

3 Mar 1993

5975-01-370-5089
Junction Box

013705089
68371-1/2: RNCC: 3 | RNVC: 2
88035A0073: RNCC: 5 | RNVC: 9
88035A0073: RNCC: D | RNVC: 9

23 Jan 1993

5975-01-367-1859
Electrical Equipment Mounting Base

013671859
RF-5072VSM-03: RNCC: 3 | RNVC: 2
10181-5072-03: RNCC: 3 | RNVC: 2
RF-5072VSM-03: RNCC: 3 | RNVC: 2
10181-5072-03: RNCC: 5 | RNVC: 2
RF-5072VSM: RNCC: 5 | RNVC: 9

9 Nov 1992

5975-01-362-8229
Electrical Conduit Adapter

013628229
LT50P: RNCC: 3 | RNVC: 2
73-1332029-1: RNCC: 5 | RNVC: 9
73-1332029-1: RNCC: 7 | RNVC: 2

15 Aug 1992

5975-01-358-4349
Interconnecting Box

013584349
2-195-6-00662: RNCC: 3 | RNVC: 1
2-195-6-10023: RNCC: 3 | RNVC: 2
2-195-6-00596: RNCC: 5 | RNVC: 9
2HG331: RNCC: C | RNVC: 1

14 May 1992

5975-01-356-6749
Cable Strain Relief Bushing

013566749
1223: RNCC: 3 | RNVC: 2
C5118717: RNCC: 5 | RNVC: 2
C5118717: RNCC: 7 | RNVC: 9

9 Apr 1992

5975-01-353-5710
Electrical Cable Nipple

013535710
4052: RNCC: 3 | RNVC: 2
A51381-2: RNCC: 5 | RNVC: 9

13 Feb 1992

5975-01-353-2166
Electrical Cable Nipple

013532166
6294501: RNCC: 3 | RNVC: 2

7 Feb 1992

5975-01-347-2578
Flexible Nonmetallic Conduit

013472578
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1007: RNCC: 3 | RNVC: 2
M81914/1-1007: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

18 Oct 1991

5975-01-346-2077
Electrical Bonding Ring

013462077
TR10AI: RNCC: 3 | RNVC: 2
TR10AI-TINEL-LOCK-RING: RNCC: 5 | RNVC: 9
TR10AI: RNCC: 5 | RNVC: 9
TR10AI: RNCC: 5 | RNVC: 9
5365-009-10AI: RNCC: C | RNVC: 1

28 Sep 1991

5975-01-345-6513
Electrical Components Tie Down Strap

013456513
PLT2M-M: RNCC: 3 | RNVC: 2

23 Sep 1991

5975-01-344-7124
Electrical Box Connector

013447124
NHC-1037-ZP: RNCC: 3 | RNVC: 2

6 Sep 1991

5975-01-343-3509
Electrical Tie Down Mounting Base

013433509
21038: RNCC: 3 | RNVC: 2
P27600: RNCC: 5 | RNVC: 9

11 Aug 1991

5975-01-342-1292
Electrical Equipment Mounting Base

013421292
78-8051-9180-2: RNCC: 3 | RNVC: 2
MT-6811/AMS-2: RNCC: 5 | RNVC: 1

16 Jul 1991

5975-01-341-9778
Stuffing Tube

013419778
SC-D-914847-3: RNCC: 1 | RNVC: 2
CG-3138: RNCC: 3 | RNVC: 9
CG-3138: RNCC: 5 | RNVC: 2

12 Jul 1991

5975-01-341-3644
Electrical Conduit Adapter

013413644
50-075-0239-89: RNCC: 3 | RNVC: 2
A3006864: RNCC: 3 | RNVC: 2
011000-4001: RNCC: 5 | RNVC: 2

27 Jun 1991

5975-01-339-9970
Electrical-Electronic Equipment Panel

013399970
5041-8912: RNCC: 3 | RNVC: 2
5041-8912: RNCC: 3 | RNVC: 9
5041-3991: RNCC: 5 | RNVC: 2
5041-3991: RNCC: 5 | RNVC: 9
5041-3991: RNCC: 5 | RNVC: 9

5 Jun 1991

5975-01-339-9969
Electrical-Electronic Equipment Panel

013399969
5041-8913: RNCC: 3 | RNVC: 9
5041-3988: RNCC: 5 | RNVC: 9
5041-8913: RNCC: 5 | RNVC: 9
5041-8913: RNCC: C | RNVC: 1

5 Jun 1991

5975-01-339-5948
Electrical Box Connector

013395948
5236: RNCC: 3 | RNVC: 2
5236: RNCC: 5 | RNVC: 2

24 May 1991

5975-01-339-5027
Electrical Conduit Adapter

013395027
8654-160400N055: RNCC: 3 | RNVC: 2
841506-23: RNCC: 3 | RNVC: 2
841506-23: RNCC: 5 | RNVC: 9

23 May 1991

5975-01-339-5025
Electrical Conduit Adapter

013395025
8654-120400N055: RNCC: 3 | RNVC: 2
841506-030: RNCC: 5 | RNVC: 9

23 May 1991

5975-01-336-9064
Junction Box Assembly

013369064
70550-02130-050: RNCC: 3 | RNVC: 2
70070-552121-041: RNCC: 5 | RNVC: 9
70070-55212-041: RNCC: 5 | RNVC: 9

3 Apr 1991

5975-01-336-0186
Conduit Outlet Cover

013360186
3100370-501: RNCC: 3 | RNVC: 2

19 Mar 1991

5975-01-335-9257
Electrical Components Tie Down Strap

013359257
53064-6: RNCC: 3 | RNVC: 2
868188-0006: RNCC: 5 | RNVC: 2
868188-0006: RNCC: 5 | RNVC: 9

15 Mar 1991

5975-01-335-1901
Rigid Metal Conduit Assembly

013351901
223954-DI0600: RNCC: 3 | RNVC: 2
253766-0044: RNCC: 5 | RNVC: 9
3130918G044: RNCC: 7 | RNVC: 2

6 Mar 1991

5975-01-334-4728
Conduit Outlet

013344728
2IH5S2-2: RNCC: 3 | RNVC: 2
LTX14-5: RNCC: 3 | RNVC: 9
LTX14-5-L: RNCC: 5 | RNVC: 9

23 Feb 1991

5975-01-333-5983
Strain Relief Bar

013335983
13201970-01: RNCC: 3 | RNVC: 9
13201970-01: RNCC: 5 | RNVC: 2
13201970-01: RNCC: C | RNVC: 1

7 Feb 1991

5975-01-333-5874
Electrical Conduit Ferrule

013335874
2-745129-6: RNCC: 3 | RNVC: 2
841803-4: RNCC: 5 | RNVC: 9
841803-4: RNCC: 7 | RNVC: 2

6 Feb 1991

5975-01-333-5873
Electrical Conduit Ferrule

013335873
1-745130-2: RNCC: 3 | RNVC: 2
841803-3: RNCC: 5 | RNVC: 9

6 Feb 1991

5975-01-333-3131
Special Item

013333131
841493-5: RNCC: 3 | RNVC: 2
EA90-20822S155: RNCC: 5 | RNVC: 2
841493-5: RNCC: 5 | RNVC: 9

30 Jan 1991

5975-01-333-0668
Stuffing Tube

013330668
841529-4: RNCC: 3 | RNVC: 2
817-20632S155: RNCC: 5 | RNVC: 2
841529-4: RNCC: 5 | RNVC: 9

23 Jan 1991

5975-01-332-8978
Electrical Wall Plate

013328978
5028: RNCC: 3 | RNVC: 2
RCV1-GFR: RNCC: 5 | RNVC: 9

19 Jan 1991

5975-01-331-9045
Strain Electrical Conductor Clamp

013319045
MB-1: RNCC: 3 | RNVC: 2
Z22-0002-002: RNCC: 7 | RNVC: 1

31 Dec 1990

5975-01-329-1505
Electrical Wall Plate

013291505
S1962: RNCC: 3 | RNVC: 2
4976: RNCC: 5 | RNVC: 9
5215-0: RNCC: 5 | RNVC: 9
4976-GY: RNCC: 5 | RNVC: 9

11 Nov 1990

5975-01-328-6229
Electrical Cable Nipple

013286229
202F221-51-07-/164: RNCC: 3 | RNVC: 2
12910598-12: RNCC: 5 | RNVC: 2
12273147-2-1.1-07/9: RNCC: 7 | RNVC: 2

6 Nov 1990

5975-01-328-6228
Electrical Cable Nipple

013286228
12273147-5-1.1-10/9: RNCC: 1 | RNVC: 2
202F253-51-10/164: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-325-3706
Electrical Equipment Cabinet

013253706
6005671: RNCC: 3 | RNVC: 2

4 Sep 1990

5975-01-325-0069
Electrical Components Tie Down Strap

013250069
3018920: RNCC: 3 | RNVC: 2

25 Aug 1990

5975-01-322-6373
Junction Box

013226373
12342198: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-320-2665
Electrical Components Tie Down Strap

013202665
343-0549-00: RNCC: 3 | RNVC: 2
TY100: RNCC: 5 | RNVC: 2

23 May 1990

5975-01-318-4726
Conduit Outlet

013184726
ARE46: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-317-3255
Electrical Box Connector

013173255
STA-7: RNCC: 3 | RNVC: 9
STA-7: RNCC: 5 | RNVC: 2

28 Mar 1990

5975-01-316-7589
Conduit Outlet

013167589
2653: RNCC: 3 | RNVC: 2

15 Mar 1990

5975-01-316-3433
Electrical Equipment Mounting Base

013163433
755017A9005: RNCC: 3 | RNVC: 2
MT4495/GRC-193: RNCC: 5 | RNVC: 2
755017A9005: RNCC: 7 | RNVC: 2
MT4495: RNCC: C | RNVC: 1
MT-4495: RNCC: C | RNVC: 1

8 Mar 1990

5975-01-314-8181
Junction Box

013148181
A14107JFGQRR OR A14107JFGQRPWR: RNCC: 3 | RNVC: 2
A14107JFGQR: RNCC: 5 | RNVC: 9

6 Feb 1990

5975-01-314-4662
Stuffing Tube

013144662
SE93103B-34C: RNCC: 3 | RNVC: 2
90-31032-155: RNCC: 5 | RNVC: 2

31 Jan 1990

5975-01-314-3648
Cathode Electrical Brush

013143648
SP-107A8012: RNCC: 3 | RNVC: 2

28 Jan 1990

5975-01-309-3195
Nonmetallic Raceway

013093195
D-2: RNCC: 3 | RNVC: 9
12552949: RNCC: 7 | RNVC: 2

15 Oct 1989

5975-01-308-5334
Flexible Metal Conduit

013085334
5384-100-002: RNCC: 3 | RNVC: 2

30 Sep 1989

5975-01-307-1716
Electrical Equipment Mounting Base

013071716
481-200470: RNCC: 3 | RNVC: 2
481-200471: RNCC: 5 | RNVC: 9
481-200470: RNCC: 5 | RNVC: 9

7 Sep 1989

5975-01-307-0204
Flexible Metal Conduit

013070204
7127K26: RNCC: 3 | RNVC: 2

5 Sep 1989

5975-01-306-5090
Electrical-Electronic Equipment Panel

013065090
42006: RNCC: 3 | RNVC: 2

25 Aug 1989

5975-01-306-3777
Electrical-Electronic Equipment Panel

013063777
EC-10440-1: RNCC: 3 | RNVC: 2

23 Aug 1989

5975-01-306-2258
Electrical Equipment Mounting Base

013062258
91497-991: RNCC: 3 | RNVC: 9
2537990-801: RNCC: 5 | RNVC: 9
91497-991: RNCC: C | RNVC: 1

19 Aug 1989

5975-01-305-8185
Cable Hanger

013058185
093-597-00: RNCC: 3 | RNVC: 2

12 Aug 1989

5975-01-304-2050
Electrical Equipment Mounting Base

013042050
A3132625: RNCC: 3 | RNVC: 2
MT-6352A/VRC: RNCC: 5 | RNVC: 2
A3132625-1: RNCC: 5 | RNVC: 9

14 Jul 1989

5975-01-303-4239
Electrical Components Tie Down Strap

013034239
PLT12EH: RNCC: 3 | RNVC: 2
6V7555: RNCC: 3 | RNVC: 2

30 Jun 1989

5975-01-302-9605
Stuffing Tube

013029605
001-008906-283: RNCC: 3 | RNVC: 2

22 Jun 1989

5975-01-301-8620
Junction Box Cover

013018620
1552AS558-1: RNCC: 3 | RNVC: 2
97151: RNCC: 5 | RNVC: 2

4 Jun 1989

5975-01-301-8130
Cable Strain Relief Bushing

013018130
200532-01: RNCC: 3 | RNVC: 2
200532-01: RNCC: 5 | RNVC: 9

3 Jun 1989

5975-01-301-6289
Electrical Conduit Adapter

013016289
E950FE: RNCC: 3 | RNVC: 9
00034481062233: RNCC: 5 | RNVC: 9

2 Jun 1989

5975-01-300-5032
Electrical Tie Down Mounting Base

013005032
201457-001: RNCC: 3 | RNVC: 2
90-10019: RNCC: 5 | RNVC: 9

15 May 1989

5975-01-299-6327
Junction Box Cover

012996327
3240-AL: RNCC: 3 | RNVC: 2
3240-AL: RNCC: 5 | RNVC: 2

4 May 1989

5975-01-299-3433
Electrical Equipment Mounting Base

012993433
236110-2: RNCC: 3 | RNVC: 2
706A35-402-139: RNCC: 5 | RNVC: 2
236110-2: RNCC: 5 | RNVC: 2
MT-6678/ARS-6(V): RNCC: 5 | RNVC: 2
D6003057: RNCC: 5 | RNVC: 2

30 Apr 1989

5975-01-296-9662
Electrical Box Connector

012969662
2282: RNCC: 3 | RNVC: 2
BS-72101: RNCC: D | RNVC: 9

26 Mar 1989

5975-01-291-6981
Electrical Equipment Rack

012916981
SM-D-805151: RNCC: 3 | RNVC: 2

4 Jan 1989

5975-01-290-4699
Electrical Grounding Plate

012904699
SN100FA: RNCC: 3 | RNVC: 2
1339AS981-1: RNCC: 5 | RNVC: 9

10 Dec 1988

5975-01-290-1617
Electrical Conduit Elbow

012901617
61DC: RNCC: 3 | RNVC: 9
173G: RNCC: 5 | RNVC: 2
6-5021: RNCC: 5 | RNVC: 9
5863: RNCC: 5 | RNVC: 9
265-E: RNCC: 5 | RNVC: 9

7 Dec 1988

5975-01-288-6594
Electrical Conduit Coupling Nut

012886594
705267: RNCC: 3 | RNVC: 2

11 Nov 1988

5975-01-282-8798
Interior Cable Rack

012828798
VD4802-00-0000: RNCC: 3 | RNVC: 2
D-329: RNCC: 5 | RNVC: 9

24 Jul 1988

5975-01-280-5371
Whip Ring Guy

012805371
755017B0778: RNCC: 3 | RNVC: 2

12 Jun 1988

5975-01-280-4620
Junction Box

012804620
389: RNCC: 3 | RNVC: 2
567: RNCC: 3 | RNVC: 2

10 Jun 1988

5975-01-277-3512
Gearbox Assembly

012773512
C-81815-1: RNCC: 3 | RNVC: 2

20 Apr 1988

5975-01-270-7361
Conduit Outlet

012707361
FSC1: RNCC: 3 | RNVC: 2

12 Jan 1988

5975-01-269-9392
Junction Box

012699392
LT-11: RNCC: 3 | RNVC: 9
2IH3-1: RNCC: 5 | RNVC: 2
LT-11: RNCC: 5 | RNVC: 2

24 Dec 1987

5975-01-269-5258
Electrical Box Connector

012695258
7480V: RNCC: 3 | RNVC: 2

18 Dec 1987

5975-01-268-6487
Junction Box

012686487
259: RNCC: 3 | RNVC: 2
5-SDW-1 1/4: RNCC: 3 | RNVC: 2
4SJD-1-1/4: RNCC: 3 | RNVC: 2
72171-1 1/4: RNCC: 5 | RNVC: 2

4 Dec 1987

5975-01-267-0282
Junction Box

012670282
ASE6X6X4: RNCC: 3 | RNVC: 2

4 Nov 1987

5975-01-265-2697
Cable Strain Relief Bushing

012652697
1150: RNCC: 3 | RNVC: 2

11 Oct 1987

5975-01-263-9309
Junction Box

012639309
EFSC150-2023: RNCC: 3 | RNVC: 2
7461K11: RNCC: 5 | RNVC: 9

22 Sep 1987

5975-01-262-4514
Difuser Filter Mount

012624514
B1-010-13: RNCC: 3 | RNVC: 2
NAVAL REPAIR PART: RNCC: 5 | RNVC: 1

29 Aug 1987

5975-01-261-9783
Electrical Tie Down Mounting Base

012619783
MCEH-S25-C0: RNCC: 3 | RNVC: 2
MCEH-S25-C0: RNCC: 5 | RNVC: 2
MCEH-S25-0: RNCC: 5 | RNVC: 2
MCEH-S25-C0: RNCC: 5 | RNVC: 2
127-0740-001: RNCC: 5 | RNVC: 2

20 Aug 1987

5975-01-258-8153
Electrical Wall Plate

012588153
731: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-253-7061
Internal Corner Coupling

012537061
G-4017TC: RNCC: 3 | RNVC: 2

23 Apr 1987

5975-01-252-2954
Junction Box

012522954
13217E2366-1: RNCC: 3 | RNVC: 2
13217E2366-1: RNCC: 3 | RNVC: 9
13217E2366-1: RNCC: 5 | RNVC: 9

1 Apr 1987

5975-01-251-6753
Junction Box Cover

012516753
30501: RNCC: 3 | RNVC: 2

22 Mar 1987

5975-01-249-3506
Electrical Components Tie Down Strap

012493506
SSC2S-S6-0: RNCC: 3 | RNVC: 2
5033672-0005: RNCC: 7 | RNVC: 9

11 Feb 1987

5975-01-248-2961
Cable Hanger

012482961
0N332810-1: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-01-247-7346
Interconnecting Box

012477346
A3041680: RNCC: 3 | RNVC: 2
A3041680: RNCC: 5 | RNVC: 2

11 Jan 1987

5975-01-246-8101
Junction Box

012468101
521511/23/4-30: RNCC: 3 | RNVC: 2
4-SW-SPL: RNCC: 5 | RNVC: 1
52151-1-2-3-4: RNCC: 5 | RNVC: 9

19 Dec 1986

5975-01-244-3413
Insulator Clamp

012443413
1349-21: RNCC: 3 | RNVC: 2

10 Nov 1986

5975-01-240-2306
Stuffing Tube Adapter

012402306
3AA041XA1624AA: RNCC: 3 | RNVC: 2
2869120-3: RNCC: 7 | RNVC: 2

11 Sep 1986

5975-01-235-1962
Electrical Equipment Mounting Base

012351962
A3014053-1: RNCC: 3 | RNVC: 2
MT-6353/VRC: RNCC: 5 | RNVC: 2

26 Jun 1986

5975-01-234-2169
Cable Splicing Kit

012342169
8427-16: RNCC: 3 | RNVC: 2
7100010774: RNCC: 5 | RNVC: 2
8407-16: RNCC: 5 | RNVC: 9

11 Jun 1986

5975-01-231-5196
Rigid Nonmetallic Conduit

012315196
49411-010: RNCC: 3 | RNVC: 9
49411-010 2IN SCHD 80 PRIM COND: RNCC: 5 | RNVC: 2
33512: RNCC: 5 | RNVC: 9
A53CA11: RNCC: 5 | RNVC: 9
49411: RNCC: 5 | RNVC: 9

29 Apr 1986

5975-01-229-8672
Conduit Outlet

012298672
E986L: RNCC: 3 | RNVC: 9
00034881065490: RNCC: 5 | RNVC: 9
00034481065494: RNCC: 5 | RNVC: 9

6 Apr 1986

5975-01-228-1236
Electrical Conduit Adapter

012281236
E943L: RNCC: 3 | RNVC: 9
E943L: RNCC: 5 | RNVC: 2
00034481062080: RNCC: 5 | RNVC: 9

14 Mar 1986

5975-01-221-5929
Wiring Duct Cover

012215929
C.75LG6: RNCC: 3 | RNVC: 2
890518-0928: RNCC: 5 | RNVC: 2
890518-0928: RNCC: 5 | RNVC: 9

1 Dec 1985

5975-01-220-7901
Electrical Equipment Mounting Base

012207901
A3014052-1: RNCC: 3 | RNVC: 2
MT-6429/VRC: RNCC: 5 | RNVC: 2

19 Nov 1985

5975-01-219-4496
Interconnecting Box

012194496
625B-246: RNCC: 3 | RNVC: 2
625B-246: RNCC: 3 | RNVC: 9
102 430 402: RNCC: 5 | RNVC: 1
SE-625B14-50: RNCC: 5 | RNVC: 2
NE-625B1-50: RNCC: 5 | RNVC: 9
A0251373: RNCC: 5 | RNVC: 9
SE-625B14-50: RNCC: 5 | RNVC: 9
102 430 402: RNCC: 5 | RNVC: 9
A0251373: RNCC: 5 | RNVC: 9
102-430-402: RNCC: 5 | RNVC: 9

26 Oct 1985

5975-01-212-5830
Outlet Cap

012125830
BP29W: RNCC: 3 | RNVC: 2
800-12777: RNCC: 5 | RNVC: 9

14 Jul 1985

5975-01-207-5533
Metallic Raceway

012075533
LD210: RNCC: 3 | RNVC: 2
AB-22120HWK: RNCC: 5 | RNVC: 2
LD210: RNCC: 5 | RNVC: 9

2 May 1985

5975-01-205-6343
Electrical Equipment Mounting Base

012056343
980-17285-12: RNCC: 3 | RNVC: 2

10 Apr 1985

5975-01-171-4790
Interconnecting Box

011714790
12285757: RNCC: 3 | RNVC: 2

8 Feb 1984

5975-01-157-8140
Electrical Equipment Mounting Base

011578140
16VE253002-1: RNCC: 3 | RNVC: 2
00-046-01: RNCC: 5 | RNVC: 2
00-046-01: RNCC: 5 | RNVC: 9

12 Jul 1983

5975-01-129-4157
Electrical-Electronic Equipment Chassis

011294157
SM-D-413528: RNCC: 3 | RNVC: 2
SM-D-413528: RNCC: 5 | RNVC: 2
413528: RNCC: 5 | RNVC: 2
SM-D-413528: RNCC: 5 | RNVC: 9
SM-D-413528: RNCC: C | RNVC: 1

5 Apr 1982

5975-01-129-3274
Conduit Outlet Cover

011293274
60CM75: RNCC: 3 | RNVC: 2

5 Apr 1982

5975-01-126-9863
Electrical Equipmea2zzyty Mounting Base

011269863
12272195: RNCC: 3 | RNVC: 2

21 Feb 1982

5975-01-126-0178
Junction Box

011260178
635-9644-001: RNCC: 3 | RNVC: 2

5 Feb 1982

5975-01-126-0020
Electrical Wall Plate

011260020
SS703: RNCC: 3 | RNVC: 2
S703: RNCC: 5 | RNVC: 9
9354: RNCC: 5 | RNVC: 9

5 Feb 1982

5975-01-105-8880
Flexible Metal Conduit

011058880
AA55810-00204: RNCC: 2 | RNVC: 2
A-A-55810: RNCC: 4 | RNVC: 1
WWC-566: RNCC: 5 | RNVC: 9

7 Jan 1981

5975-01-105-8253
Raceway Channell End

011058253
G1020: RNCC: 3 | RNVC: 2

5 Jan 1981

5975-01-105-6804
Electrical Box Connector

011056804
SE0-21: RNCC: 3 | RNVC: 2
2200: RNCC: 5 | RNVC: 2
CGY241: RNCC: 5 | RNVC: 9
SE-751: RNCC: 5 | RNVC: 9
CGYCGY241: RNCC: 5 | RNVC: 9
CGY241: RNCC: 5 | RNVC: 9

2 Jan 1981

5975-01-105-6822
Raceway End Reducing Connector

011056822
G3089E: RNCC: 3 | RNVC: 2

2 Jan 1981

5975-01-105-6805
Conduit Outlet

011056805
TA75-M: RNCC: 3 | RNVC: 2

2 Jan 1981

5975-01-091-6161
Electrical Conductor Bushing

010916161
2800: RNCC: 3 | RNVC: 2
358-0599-00: RNCC: 5 | RNVC: 2
358-0599-00: RNCC: 5 | RNVC: 2
B187-125: RNCC: 5 | RNVC: 9

11 Mar 1980

5975-01-085-0438
Conduit Outlet Cover

010850438
1FA: RNCC: 3 | RNVC: 2

28 Oct 1979

5975-01-047-0587
Electrical-Electronic Equipment Chassis

010470587
755017A3900: RNCC: 3 | RNVC: 2
755017A3900: RNCC: 5 | RNVC: 2
A12522: RNCC: 5 | RNVC: 2
75517A3900: RNCC: 5 | RNVC: 2
755017A3900: RNCC: 5 | RNVC: 9

28 Aug 1977

5975-01-045-9683
Junction Box Cover

010459683
13215E9893: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-01-041-8297
Conduit Outlet

010418297
LL38 AND 380F: RNCC: 3 | RNVC: 2
LL-100-M AND K100-CM: RNCC: 5 | RNVC: 2
LL-100 AND BC-100G: RNCC: 5 | RNVC: 9

1 Jun 1977

5975-01-041-3621
Conduit Outlet Cover

010413621
FSK-1VTS-A: RNCC: 3 | RNVC: 2
DS128: RNCC: 3 | RNVC: 2

23 May 1977

5975-01-039-9750
Electrical Box Connector

010399750
2439: RNCC: 3 | RNVC: 2
AS 70319: RNCC: 5 | RNVC: 1
2439: RNCC: 5 | RNVC: 9
WT 6862-6: RNCC: 5 | RNVC: 9
SE-1004: RNCC: 5 | RNVC: 9

28 Apr 1977

5975-01-038-4851
Junction Box Cover

010384851
RSL5: RNCC: 3 | RNVC: 2

7 Apr 1977

5975-01-037-8929
Electrical Box Connector

010378929
C22: RNCC: 3 | RNVC: 2
7226V: RNCC: 5 | RNVC: 2
E40-300: RNCC: E | RNVC: 8

26 Mar 1977

5975-01-036-9578
Electrical Components Tie Down Strap

010369578
MS3368-1-2B: RNCC: 2 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
MS3368-1-2B: RNCC: 5 | RNVC: 1
MIL-S-23190: RNCC: 5 | RNVC: 9
MS3368-1-2B: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 9

10 Mar 1977

5975-01-036-7522
Electrical Tie Down Mounting Base

010367522
TM3S10-C: RNCC: 3 | RNVC: 2
SMNY-002NA: RNCC: 3 | RNVC: 2
SM-10: RNCC: 5 | RNVC: 2
CTM310: RNCC: 5 | RNVC: 2
867094-0006: RNCC: 5 | RNVC: 9

5 Mar 1977

5975-01-035-7704
Clamp Cable

010357704
755090A0666-1: RNCC: 3 | RNVC: 9

14 Feb 1977

5975-01-035-4386
Electrical Equipment Rack

010354386
JSIX-64S: RNCC: 3 | RNVC: 2
DM-2410: RNCC: 5 | RNVC: 1
CI-273: RNCC: 5 | RNVC: 1
BP2313: RNCC: 5 | RNVC: 1
JS1X-64S: RNCC: 5 | RNVC: 9
1500-0121-1: RNCC: 5 | RNVC: 9
DM-2410: RNCC: 5 | RNVC: 9
CI-273: RNCC: 5 | RNVC: 9
A-1406: RNCC: 5 | RNVC: 9

10 Feb 1977

5975-01-034-2266
Electrical Tie Down Mounting Base

010342266
868140-0001: RNCC: 3 | RNVC: 2
868140-0001: RNCC: 5 | RNVC: 9

21 Jan 1977

5975-01-033-9759
Transit Stay Plate

010339759
M24705/1SA: RNCC: 2 | RNVC: 2
M24705: RNCC: 4 | RNVC: 1
ALUMINUM STAY PLATE: RNCC: 5 | RNVC: 9
ALUMINUM STAY PLATE: RNCC: 5 | RNVC: 9
CC530967: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-01-032-4639
Rigid Metal Conduit

010324639
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL1242: RNCC: 3 | RNVC: 1
3IN. SIZE IMC: RNCC: 5 | RNVC: 9
WW-C-581: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4637
Rigid Metal Conduit

010324637
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL1242: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4638
Rigid Metal Conduit

010324638
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
2 1/2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4632
Rigid Metal Conduit

010324632
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
1/2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4636
Rigid Metal Conduit

010324636
ANSI UL1242: RNCC: 3 | RNVC: 1
UL 1242: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
1 1/2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-3761
Nonmetallic Conduit Raceway Cover

010323761
C2DG6: RNCC: 3 | RNVC: 2

14 Dec 1976

5975-01-030-0989
Metallic Raceway

010300989
G4000B-10: RNCC: 3 | RNVC: 1
G-4000B: RNCC: 5 | RNVC: 9
12423626-010: RNCC: 7 | RNVC: 2
12423626: RNCC: D | RNVC: 9

27 Oct 1976

5975-01-028-9413
Conduit Outlet Cover

010289413
FS-2-DCS: RNCC: 3 | RNVC: 9
FSK-2DR: RNCC: 5 | RNVC: 2
DRF-2: RNCC: 5 | RNVC: 9
77C721210P006: RNCC: 7 | RNVC: 9

13 Oct 1976

5975-01-027-3273
Junction Box

010273273
AA59214-2: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
SC BOX 12X12X4: RNCC: 5 | RNVC: 1
WJ800: RNCC: 5 | RNVC: 9

16 Sep 1976

5975-01-027-3274
Junction Box

010273274
SC BOX 6X6X3: RNCC: 3 | RNVC: 2
ESCB663PK: RNCC: 5 | RNVC: 2
17690: RNCC: 5 | RNVC: 9

16 Sep 1976

5975-01-025-8155
Electrical Conduit Bend

010258155
ANSI UL797: RNCC: 3 | RNVC: 1
MS75023-11: RNCC: 5 | RNVC: 9
2.00-90DEGRIGIDELBOW: RNCC: E | RNVC: 8
40006: RNCC: E | RNVC: 8

11 Aug 1976

5975-01-023-1584
End Cap

010231584
4-DC: RNCC: 3 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9
4-DC: RNCC: 5 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9

12 Jun 1976

5975-01-022-8469
Electrical Wall Plate

010228469
92102: RNCC: 3 | RNVC: 2
P-82-I: RNCC: C | RNVC: 1

6 Jun 1976

5975-01-022-7577
Conduit Outlet

010227577
FDT1: RNCC: 3 | RNVC: 2

5 Jun 1976

5975-01-022-1299
Electrical Box Connector

010221299
PK-250: RNCC: 3 | RNVC: 9

25 May 1976

5975-01-022-0014
Conduit Chase Nipple

010220014
SM-A-751505-1: RNCC: 3 | RNVC: 2
CN-600: RNCC: 3 | RNVC: 9
956: RNCC: 5 | RNVC: 9

24 May 1976

5975-01-020-9176
Cable Hanger

010209176
RTD2680: RNCC: 3 | RNVC: 1
101-107-060: RNCC: 3 | RNVC: 2
1162: RNCC: 3 | RNVC: 2
2070: RNCC: 5 | RNVC: 9
1162: RNCC: 5 | RNVC: 9
010-352: RNCC: 5 | RNVC: 9

7 May 1976

5975-01-020-5023
Electrical Wall Plate

010205023
70151: RNCC: 3 | RNVC: 2
S724: RNCC: 5 | RNVC: 9

30 Apr 1976

5975-01-020-4730
Junction Box

010204730
Z56-80-48: RNCC: 3 | RNVC: 2
Z56-80-48: RNCC: 5 | RNVC: 9

30 Apr 1976

5975-01-020-1178
Fixture Nipple

010201178
G972 1/2: RNCC: 3 | RNVC: 2

25 Apr 1976

5975-01-017-7379
Hanger

010177379
HS402: RNCC: 3 | RNVC: 2

12 Mar 1976

5975-01-017-5968
Nail-Up Strap

010175968
2252: RNCC: 3 | RNVC: 2
333: RNCC: 5 | RNVC: 9
03700: RNCC: 5 | RNVC: 9
202-104: RNCC: 5 | RNVC: 9
920-NS: RNCC: 5 | RNVC: 9
250: RNCC: 5 | RNVC: 9

11 Mar 1976

5975-01-016-4650
Duct Elbow

010164650
LDB890L: RNCC: 3 | RNVC: 2
LD88L: RNCC: 5 | RNVC: 9
LD88L: RNCC: 5 | RNVC: 9

12 Feb 1976

5975-01-016-3428
Conduit Outlet

010163428
LB50T-M: RNCC: 3 | RNVC: 2
LB17-MT: RNCC: 5 | RNVC: 2
LBE-50: RNCC: 5 | RNVC: 9
LB17-MT: RNCC: 5 | RNVC: 9

8 Feb 1976

5975-01-016-1805
Raceway Conduit Connector

010161805
G-976: RNCC: 3 | RNVC: 2

5 Feb 1976

5975-01-016-1775
Junction Box

010161775
10-10-6SC: RNCC: 3 | RNVC: 2

5 Feb 1976

5975-01-016-1685
Conduit Outlet

010161685
LB18: RNCC: 3 | RNVC: 2

5 Feb 1976

5975-01-016-0880
Grounding Clamp

010160880
GC003: RNCC: 3 | RNVC: 2
G0003: RNCC: 5 | RNVC: 9
13219E3929: RNCC: 7 | RNVC: 2

4 Feb 1976

5975-01-015-7660
Electrical-Electronic Equipment Chassis

010157660
16861: RNCC: 3 | RNVC: 9
16861: RNCC: 5 | RNVC: 2
16861: RNCC: 5 | RNVC: 2
16861: RNCC: 5 | RNVC: 9
16861: RNCC: 5 | RNVC: 9

27 Jan 1976

5975-01-015-1284
Electrical Box Connector

010151284
CES-4: RNCC: 3 | RNVC: 2

15 Jan 1976

5975-01-014-9929
Stuffing Tube

010149929
M24235/17-004: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9100
Suspension Clamp

010149100
J1096: RNCC: 3 | RNVC: 2
S521740: RNCC: 5 | RNVC: 9
DJ2C7: RNCC: 5 | RNVC: 9
7903: RNCC: 5 | RNVC: 9
5269: RNCC: 5 | RNVC: 9
S7145: RNCC: 5 | RNVC: 9
S-3418: RNCC: 5 | RNVC: 9

8 Jan 1976

5975-01-014-7145
Blank Panel

010147145
LBP-40: RNCC: 3 | RNVC: 9
2605144-2: RNCC: 7 | RNVC: 2

2 Jan 1976

5975-01-014-7136
Conduit Outlet Cover

010147136
989: RNCC: 3 | RNVC: 2

2 Jan 1976

5975-01-014-7132
Electrical Conduit Elbow

010147132
LBY45: RNCC: 3 | RNVC: 2

2 Jan 1976

5975-01-013-0289
Junction Box

010130289
601: RNCC: 3 | RNVC: 2
CXWOW: RNCC: 5 | RNVC: 2
384D: RNCC: 5 | RNVC: 2
CXW: RNCC: 5 | RNVC: 9
CXW: RNCC: 5 | RNVC: 9

22 Nov 1975

5975-01-012-7444
Junction Box

010127444
A10R104: RNCC: 3 | RNVC: 2

18 Nov 1975

5975-01-012-6204
Electrical Conduit Adapter

010126204
J595-1812-2.5A-4: RNCC: 3 | RNVC: 2
7902622-02: RNCC: 5 | RNVC: 2
J595-1812-2.5-4: RNCC: 5 | RNVC: 9
J595-1812-2504: RNCC: 5 | RNVC: 9
5935PL0902651: RNCC: 6 | RNVC: 9

15 Nov 1975

5975-01-012-5643
Junction Box

010125643
A10R86: RNCC: 3 | RNVC: 2

14 Nov 1975

5975-01-011-0820
Electrical Conduit Adapter

010110820
10684037-36: RNCC: 1 | RNVC: 2
6060-20-171-15: RNCC: 3 | RNVC: 2

12 Oct 1975

5975-01-011-0376
Electrical Conduit Coupling Nut Clamp

010110376
13217E9335-1: RNCC: 3 | RNVC: 2
ABG0704: RNCC: 5 | RNVC: 9

12 Oct 1975

5975-01-011-0004
Conduit Outlet

010110004
2906: RNCC: 3 | RNVC: 2
2906: RNCC: 5 | RNVC: 9

12 Oct 1975

5975-01-010-8942
Electrical Equipment Mounting Base

010108942
1546261-1: RNCC: 3 | RNVC: 2
1546261-1: RNCC: 3 | RNVC: 9
1546261-1: RNCC: 5 | RNVC: 2
1546261-1: RNCC: 5 | RNVC: 9

9 Oct 1975

5975-01-010-8919
Flexible Nonmetallic Conduit

010108919
17-C-18035-40: RNCC: 3 | RNVC: 2
7801: RNCC: 5 | RNVC: 9
5401: RNCC: 5 | RNVC: 9
HH-T-791: RNCC: 5 | RNVC: 9
683: RNCC: 5 | RNVC: 9
LOOM 3/16 ID: RNCC: 5 | RNVC: 9

9 Oct 1975

5975-01-010-6235
Electrical Conduit Adapter

010106235
10684037-18: RNCC: 1 | RNVC: 2
6060-12-081-15: RNCC: 3 | RNVC: 2

3 Oct 1975

5975-01-010-5950
Electrical Components Tie Down Strap

010105950
TYR-505: RNCC: 3 | RNVC: 2
TYR505: RNCC: 5 | RNVC: 2
TYR-5: RNCC: 5 | RNVC: 9

2 Oct 1975

5975-01-010-2953
Junction Box

010102953
ASE10X8X4: RNCC: 3 | RNVC: 2

25 Sep 1975

5975-01-009-8531
Blank Panel

010098531
5060-8762: RNCC: 3 | RNVC: 9
5060-8762: RNCC: 5 | RNVC: 9
5060-0797: RNCC: 5 | RNVC: 9
MX8610U: RNCC: 5 | RNVC: 9
5060-0797: RNCC: 5 | RNVC: 9
5060-0797: RNCC: C | RNVC: 1
5060-8762: RNCC: C | RNVC: 1

17 Sep 1975

5975-01-009-8152
Electrical Equipment Mounting Base

010098152
138186: RNCC: 3 | RNVC: 2

17 Sep 1975

5975-01-009-7677
Conduit Hub

010097677
3930: RNCC: 3 | RNVC: 2
G-50H: RNCC: 5 | RNVC: 9

15 Sep 1975

Load More Results