5975-99-111-7333
Cable Marker Sleeve
5975991117333 991117333 599-9
A cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER. View more Cable Marker Sleeve
Managed by United Kingdom
NSN Created on 25 Apr 1991
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5975-99-111-7333
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5975-99-111-7333 5+ Documents (More...)
25 Apr 1991 5975-99-111-7370 Cable Marker Sleeve 661-0RNCC: 3 | RNVC: 2 | DAC: 4 25 Apr 1991 5975-99-111-7333
5310-99-542-1500 5310995421500 995421500 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-00-558-5095 5310005585095 005585095 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5935-01-537-1378 5935015371378 015371378 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.
5935-01-467-6976 5935014676976 014676976 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.
Restrictions 5975-99-111-7333
End Users 5975-99-111-7333
- United Kingdom (ZK)
Approved Sources 5975-99-111-7333
- Part Number
- Manufacturer
- Status
- 599-9
- Manufacturer
- K1860 - Critchley Ltd (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 5975-99-111-7333
5975-14-568-2150 5975-99-117-2332 5975-14-555-8581 5975-32-069-7270 5975-99-527-2813 5975-13-117-3463 5975-12-197-3836 5975-99-527-2921 5975-13-117-0558 5975-99-231-3928 5975-99-733-6552 5975-99-956-6081 5975-12-374-9700 5975-12-371-9083 5975-99-867-8266 5975-99-257-0101 5975-99-406-3441 5975-99-719-0736