5975-14-433-2518

3010-01-305-2376 3010013052376 013052376 is a flexible connection designed for nonvehicular applications which permits rotary motion to be transmitted between two shafts located at an angle to each other. the angle between the shafts may be continually varied within certain limits; the connecting ends must have either a flange, hub, or splined stub shaft; the plain portion of a splined stub shaft must not exceed the length of the splines. excludes drive or propeller shafts with joint(s) at one or both ends. see universal joint,geared.

1660-00-800-2892 1660008002892 008002892 PIN ASSEMBLY,LOCK

3010-01-316-9988 3010013169988 013169988 is a flexible connection designed for nonvehicular applications which permits rotary motion to be transmitted between two shafts located at an angle to each other. the angle between the shafts may be continually varied within certain limits; the connecting ends must have either a flange, hub, or splined stub shaft; the plain portion of a splined stub shaft must not exceed the length of the splines. excludes drive or propeller shafts with joint(s) at one or both ends. see universal joint,geared.

3120-00-413-3956 3120004133956 004133956 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.