5975-13-114-4713

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Electrical Equipment Leg (INC 19746) 1994 5975-13-114-4713

1995 5975-14-471-9606 Electrical Equipment Leg 870000004RNCC: 3 | RNVC: 2 | DAC: 5 28 Sep 1994 5975-13-114-4713

2410-25-112-2648 2410251122648 251122648

2410-25-112-2572 2410251122572 251122572

5310-14-483-3426 5310144833426 144833426 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.