What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

✨ Tired of ads? Register and login for a clean, ad-free experience!

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 2 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
88102 Items

FR
France
48173 Items

UK
United Kingdom
41043 Items

DE
Germany
16261 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 896 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 340 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1995 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6446 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1026 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 632 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7324 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1900 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11019 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1346 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2423 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 230 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1521 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4129 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 92 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14546 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 135 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 543 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1803 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1806 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9969 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1054 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 601 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9839 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11807 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 388 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 843 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2122 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4144 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 2of 491

5975-01-130-2578
Junction Box Cover

011302578
65560-03150-119: RNCC: 3 | RNVC: 2
65560-03150-119: RNCC: 5 | RNVC: 2
65560-03150-103: RNCC: 5 | RNVC: 9
65560-03150-109: RNCC: 5 | RNVC: 9

19 Apr 1982

5975-01-128-1340
Electrical Adapter

011281340
10-435962-223: RNCC: 3 | RNVC: 2
11663286-2: RNCC: 5 | RNVC: 9

13 Mar 1982

5975-01-125-6688
Elect Box Connector

011256688
CG-5050: RNCC: 3 | RNVC: 2
56646-8: RNCC: 5 | RNVC: 2
13229E6555-2: RNCC: 7 | RNVC: 2

1 Feb 1982

5975-01-123-9103
Ground Rod Section

011239103
635830: RNCC: 3 | RNVC: 2
6253: RNCC: 5 | RNVC: 9
W-583: RNCC: 5 | RNVC: 9

19 Dec 1981

5975-01-122-5230
Junction Box

011225230
AA1555: RNCC: 3 | RNVC: 2
401-4676882 ITEM 7: RNCC: D | RNVC: 9

23 Nov 1981

5975-01-121-8601
Blank Panel

011218601
A-12P10: RNCC: 3 | RNVC: 9
A-12P10: RNCC: 5 | RNVC: 9

10 Nov 1981

5975-01-121-6699
Cable Marker Sleeve

011216699
SS7074-415: RNCC: 3 | RNVC: 2
SS7074-415: RNCC: 5 | RNVC: 2

7 Nov 1981

5975-01-119-9337
Electrical Coupling

011199337
RP2200-EM06: RNCC: 3 | RNVC: 2
S82200-S06: RNCC: 3 | RNVC: 2
RP2200-F06: RNCC: 5 | RNVC: 2
RP2200-F06: RNCC: 5 | RNVC: 9
RP2200-F06: RNCC: 5 | RNVC: 9
RP2200-F06: RNCC: 5 | RNVC: 9
S82200-S06: RNCC: 5 | RNVC: 9
S82200-F06: RNCC: 5 | RNVC: 9

8 Oct 1981

5975-01-119-4381
Flexible Metal Conduit

011194381
SM83-06NC: RNCC: 3 | RNVC: 2
750-085-24: RNCC: 3 | RNVC: 2
MHT75-31-P: RNCC: 5 | RNVC: 1
SM 83-06SN: RNCC: 5 | RNVC: 9
237R0750: RNCC: 5 | RNVC: 9

24 Sep 1981

5975-01-118-8371
Electrical Coupling

011188371
7000-690-EM05: RNCC: 3 | RNVC: 2
RP2200-EM05: RNCC: 3 | RNVC: 2
S82200-EM05: RNCC: 3 | RNVC: 2
RP2200-EM05: RNCC: 5 | RNVC: 1
S82200-EM05: RNCC: 5 | RNVC: 9
RP2200-G05: RNCC: 5 | RNVC: 9
RP2200-F05: RNCC: 5 | RNVC: 9
RP2200-EM05: RNCC: 7 | RNVC: 1

12 Sep 1981

5975-01-118-8368
Electrical Adapter

011188368
RP2321-03-06: RNCC: 3 | RNVC: 1
RP2321-03-06: RNCC: 3 | RNVC: 1
RP2321-03-06SM: RNCC: 3 | RNVC: 2
S82321-03-06: RNCC: 5 | RNVC: 1
RP2321-03-06: RNCC: 5 | RNVC: 2
S82321-03-06: RNCC: 5 | RNVC: 9
RP2321-03-06: RNCC: 5 | RNVC: 9
164-201-1S: RNCC: C | RNVC: 1
RP2320-03-06: RNCC: C | RNVC: 1
RP2321-(0.9375-: RNCC: C | RNVC: 1

12 Sep 1981

5975-01-118-6759
Electrical Adapter

011186759
RP2440-06-N: RNCC: 3 | RNVC: 2
RP2440-06-N: RNCC: 5 | RNVC: 2
RP2440-06-1: RNCC: 5 | RNVC: 9

9 Sep 1981

5975-01-116-8979
Me Conduit Assembly

011168979
4B69142-121A: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-01-115-1314
Me Conduit Assembly

011151314
4B69142-139A: RNCC: 3 | RNVC: 2

28 Jun 1981

5975-01-113-7251
Me Conduit Assembly

011137251
4B69143-139A: RNCC: 3 | RNVC: 2
RC-4B69143-139A: RNCC: 5 | RNVC: 2
4B69143-139A: RNCC: 5 | RNVC: 9

3 Jun 1981

5975-01-112-6610
Me Conduit Assembly

011126610
4B69142-143A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6607
Rigid Metal Conduit Assembly

011126607
4B69142-131A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6606
Me Conduit Assembly

011126606
4B69142-129A: RNCC: 3 | RNVC: 2
4B69142-129A: RNCC: 5 | RNVC: 2

8 May 1981

5975-01-112-6604
Rigid Metal Conduit Assembly

011126604
4B69142-119A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6601
Rigid Metal Conduit Assembly

011126601
4B69143-131A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6600
Me Conduit Assembly

011126600
4B69143-129A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6598
Rigid Metal Conduit Assembly

011126598
4B69143-125A: RNCC: 3 | RNVC: 2
4B69143-125A: RNCC: 5 | RNVC: 9

8 May 1981

5975-01-112-6597
Rigid Metal Conduit Assembly

011126597
4B69143-121A: RNCC: 3 | RNVC: 2
4B69143-121A: RNCC: 5 | RNVC: 9

8 May 1981

5975-01-112-6596
Me Conduit Assembly

011126596
4B69142-137A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6595
Rigid Metal Conduit Assembly

011126595
4B69142-135A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-2151
Oil Return Junction

011122151
5136519: RNCC: 3 | RNVC: 2
PC5136519: RNCC: 5 | RNVC: 9

30 Apr 1981

5975-01-111-4773
Ground Strap Spring

011114773
3365616-1: RNCC: 3 | RNVC: 2
3365616-1: RNCC: 3 | RNVC: 2
3365616-1: RNCC: 5 | RNVC: 2
5975PL0802148: RNCC: 6 | RNVC: 9

17 Apr 1981

5975-01-110-7686
Elect Tiedown Strap

011107686
PLT2I-C0: RNCC: 3 | RNVC: 1
RT-508-0: RNCC: 3 | RNVC: 2
PLT2I-C0: RNCC: 3 | RNVC: 2
02401759: RNCC: 5 | RNVC: 2
AL-08-40-0-C: RNCC: 5 | RNVC: 2
L-8-40-0-C: RNCC: 5 | RNVC: 2
92220509: RNCC: 5 | RNVC: 2
L-8-40-0: RNCC: 5 | RNVC: 9
02401759: RNCC: 5 | RNVC: 9

5 Apr 1981

5975-01-106-2231
Blank Panel

011062231
81-0849-1: RNCC: 3 | RNVC: 2

14 Jan 1981

5975-01-104-6913
Tiedo Mou Nting Base

011046913
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3339-1-9: RNCC: 3 | RNVC: 2
MS3339-1-9: RNCC: 3 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 9
MS3339-1-0: RNCC: 5 | RNVC: 9
MIL-S-23190: RNCC: 5 | RNVC: 9

9 Dec 1980

5975-01-101-5348
Elect Tiedown Strap

011015348
696-40381-1: RNCC: 3 | RNVC: 1
08403: RNCC: 3 | RNVC: 2
PLT4H-TL30: RNCC: 3 | RNVC: 2
T120RHS: RNCC: 3 | RNVC: 2
ST9M559-3: RNCC: 5 | RNVC: 1
PLT4H-C30: RNCC: 5 | RNVC: 9
10134323: RNCC: 6 | RNVC: 9

2 Oct 1980

5975-01-101-4160
Elect Tiedown Strap

011014160
12282776: RNCC: 3 | RNVC: 2
TYZ28M: RNCC: 5 | RNVC: 1
RT1400-Z: RNCC: 5 | RNVC: 1
PLT4S-C76: RNCC: 5 | RNVC: 1
PLT4S-C76: RNCC: 5 | RNVC: 2
PLT4S-M76: RNCC: 5 | RNVC: 9
TYZ28M: RNCC: 5 | RNVC: 9
PLT4S-76: RNCC: 5 | RNVC: 9
TYZ28M: RNCC: C | RNVC: 1

29 Sep 1980

5975-01-101-3089
Cord Protector

011013089
751332002600: RNCC: 3 | RNVC: 2
196667-661: RNCC: 5 | RNVC: 9

27 Sep 1980

5975-01-094-4698
Electr Cable Nipple

010944698
12273147-120: RNCC: 1 | RNVC: 2
770-020S602: RNCC: 3 | RNVC: 2
202F211-51: RNCC: 5 | RNVC: 2
313F322-9: RNCC: 5 | RNVC: 2
10652587-1: RNCC: 5 | RNVC: 9
202F211-51: RNCC: 5 | RNVC: 9
313F322-9: RNCC: 5 | RNVC: 9
313F322-9: RNCC: 5 | RNVC: 9
13238510-1: RNCC: 5 | RNVC: 9
202F211-51-0: RNCC: 5 | RNVC: 9

10 May 1980

5975-01-089-3711
Electrical Adapter

010893711
553-908-001-146: RNCC: 3 | RNVC: 2
553-908-001: RNCC: 5 | RNVC: 2
553-908-001-146: RNCC: 5 | RNVC: 2
553-908-001: RNCC: 5 | RNVC: 9

31 Jan 1980

5975-01-088-6116
Conduit Outlet

010886116
FDC-1: RNCC: 3 | RNVC: 2
FDC-1: RNCC: 5 | RNVC: 9
82-2729885-2: RNCC: 5 | RNVC: 9
A3178930-3: RNCC: 5 | RNVC: 9

16 Jan 1980

5975-01-088-5993
Junction Box

010885993
4B69135-105A: RNCC: 3 | RNVC: 2

16 Jan 1980

5975-01-083-1879
Electrical Box Connector

010831879
C-750: RNCC: 3 | RNVC: 2
C-750: RNCC: 5 | RNVC: 9
5HB99: RNCC: C | RNVC: 1
6701510: RNCC: C | RNVC: 1

19 Sep 1979

5975-01-082-5430
Tiedo Mounting Base

010825430
TC5345A: RNCC: 3 | RNVC: 2
74B059271-201: RNCC: 7 | RNVC: 1

5 Sep 1979

5975-01-079-4088
Box Junction Cover

010794088
4B69121-121A: RNCC: 3 | RNVC: 2

5 Jul 1979

5975-01-075-0581
Electrical Box

010750581
4B69133-107A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0570
Electrical Box

010750570
4B69131-103A: RNCC: 3 | RNVC: 2
4B69131-103A: RNCC: 5 | RNVC: 2

12 Apr 1979

5975-01-075-0564
Electrical Box

010750564
4B69121-103A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-062-2174
Conduit

010622174
10911021: RNCC: 1 | RNVC: 2
179489-0800: RNCC: 3 | RNVC: 2
W-1297-11: RNCC: 3 | RNVC: 2
17489-0800: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

13 Jul 1978

5975-01-057-3926
Cable Hanger

010573926
014-02-1230: RNCC: 3 | RNVC: 2
014-02-1230: RNCC: 5 | RNVC: 9
639AS1299: RNCC: D | RNVC: 9

11 Mar 1978

5975-01-057-1085
Electrical Bushing

010571085
G70544-2: RNCC: 3 | RNVC: 2
5975PL0802204: RNCC: 6 | RNVC: 9

6 Mar 1978

5975-01-053-1331
Electrical Components Tie Down Strap

010531331
63128: RNCC: 3 | RNVC: 2
T501OM4: RNCC: 3 | RNVC: 2
TY253MX: RNCC: 3 | RNVC: 2
TY253MX: RNCC: 5 | RNVC: 1
341093: RNCC: 5 | RNVC: 2
001-080024R00: RNCC: 5 | RNVC: 2
001-080024R00: RNCC: 5 | RNVC: 2
5201HX: RNCC: 5 | RNVC: 9
1003068: RNCC: 7 | RNVC: 2
5201HX: RNCC: 7 | RNVC: 2

30 Dec 1977

5975-01-049-2927
Electrical Components Tie Down Strap

010492927
PLT4S-30: RNCC: 3 | RNVC: 2
696-40380: RNCC: 3 | RNVC: 2
332-1389: RNCC: 5 | RNVC: 2
PLT4S-C30: RNCC: 5 | RNVC: 9
72-5264: RNCC: 7 | RNVC: 2

15 Oct 1977

5975-01-043-0097
Stuffing Tube

010430097
G8052-24N: RNCC: 3 | RNVC: 2

19 Jun 1977

5975-01-036-7522
Tiedo Mounting Base

010367522
TM3S10-C: RNCC: 3 | RNVC: 2
SMNY-002NA: RNCC: 3 | RNVC: 2
SM-10: RNCC: 5 | RNVC: 2
CTM310: RNCC: 5 | RNVC: 2
867094-0006: RNCC: 5 | RNVC: 9

5 Mar 1977

5975-01-034-5622
Cable Spacer

010345622
RM 15/0: RNCC: 3 | RNVC: 2
3926678C1: RNCC: 5 | RNVC: 2
15/0: RNCC: 5 | RNVC: 9
15/0: RNCC: 5 | RNVC: 9
RM 15/0: RNCC: 5 | RNVC: 9
15/0: RNCC: 5 | RNVC: 9
15/0: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-034-5529
Electrica Protector

010345529
M24705/1-BN3016: RNCC: 2 | RNVC: 2
M24705/1BN3016: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
30/16: RNCC: 5 | RNVC: 1
30/16: RNCC: 5 | RNVC: 9
M24705: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9
30/16: RNCC: 5 | RNVC: 9

27 Jan 1977

5975-01-030-0555
Conduit Outlet

010300555
67A274U519: RNCC: 3 | RNVC: 2
GECTT1: RNCC: 3 | RNVC: 2
GRT14: RNCC: 5 | RNVC: 2
67A274C519: RNCC: C | RNVC: 1

27 Oct 1976

5975-01-026-2405
Electrical Locknut

010262405
147: RNCC: 3 | RNVC: 2
147: RNCC: 5 | RNVC: 2
307: RNCC: 5 | RNVC: 9
10807: RNCC: 5 | RNVC: 9

19 Aug 1976

5975-01-020-9190
Cable Hanger

010209190
101-107-285: RNCC: 3 | RNVC: 2
0550: RNCC: 5 | RNVC: 1
CH9550: RNCC: 5 | RNVC: 2
RTG7550: RNCC: 5 | RNVC: 2
RTD7550: RNCC: 5 | RNVC: 9

7 May 1976

5975-01-020-9187
Cable Hanger

010209187
0350: RNCC: 3 | RNVC: 2
0350: RNCC: 5 | RNVC: 2
101-107-283: RNCC: 5 | RNVC: 2

7 May 1976

5975-01-020-9183
Cable Hanger

010209183
101-107-118: RNCC: 3 | RNVC: 2
3065: RNCC: 5 | RNVC: 1
1170: RNCC: 5 | RNVC: 9
12665605: RNCC: 7 | RNVC: 2

7 May 1976

5975-01-020-9179
Cable Hanger

010209179
RTW1531: RNCC: 3 | RNVC: 2
101-107-102: RNCC: 3 | RNVC: 2
1065: RNCC: 5 | RNVC: 2
CH1065: RNCC: 5 | RNVC: 2
RTD1531: RNCC: 5 | RNVC: 9
004-212: RNCC: 5 | RNVC: 9
1065: RNCC: 5 | RNVC: 9

7 May 1976

5975-00-989-5046
Stuffing Tube

009895046
M19622/1-005: RNCC: 2 | RNVC: 2
MIL-S-19622C-1: RNCC: 4 | RNVC: 1
F1836M/1-005: RNCC: 5 | RNVC: 1
MILS19622-1: RNCC: 5 | RNVC: 9
5975PL0811420: RNCC: 6 | RNVC: 9
NYST-1-005: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-989-5045
Stuffing Tube

009895045
M19622-2-005: RNCC: 2 | RNVC: 2
MIL-S-19622C-2: RNCC: 4 | RNVC: 1
556-7068391-52: RNCC: 5 | RNVC: 1
MILS19622-2: RNCC: 5 | RNVC: 9
5975PL1387462: RNCC: 6 | RNVC: 9
02-90-0152: RNCC: C | RNVC: 1
H793-3201-52: RNCC: C | RNVC: 1
MS16165-4: RNCC: C | RNVC: 1
MS19622-2-005: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-976-1035
Grounding Reel

009761035
143050: RNCC: 3 | RNVC: 2
810J61-1FN68: RNCC: 5 | RNVC: 2
N-1035-50-R: RNCC: 5 | RNVC: 2
143050: RNCC: 5 | RNVC: 2
700H-40-GOR: RNCC: 5 | RNVC: 9
700-50R: RNCC: 5 | RNVC: 9
5150: RNCC: 5 | RNVC: 9
N-1035-50-R: RNCC: 5 | RNVC: 9
700E40G0R: RNCC: 5 | RNVC: 9
700-50R: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-968-6667
Blank Panel

009686667
5L5960-35: RNCC: 3 | RNVC: 2
5L5960-35: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-942-1000
Combination Conduit

009421000
G6011TX: RNCC: 3 | RNVC: 9
G6011TX: RNCC: 5 | RNVC: 2
G6011TX: RNCC: 5 | RNVC: 2
G6011TX: RNCC: 5 | RNVC: 2
G6011TX: RNCC: 5 | RNVC: 2
MFAG0841: RNCC: 5 | RNVC: 9

7 Dec 1965

5975-00-908-3653
Electrical Ferrule

009083653
6847933-02: RNCC: 3 | RNVC: 2
6847933-02: RNCC: 5 | RNVC: 2
6847933-02: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-904-6223
Elect Box Connector

009046223
5354: RNCC: 3 | RNVC: 2
3544: RNCC: 5 | RNVC: 2
STB-90100: RNCC: 5 | RNVC: 9
LQ10090-IC: RNCC: 5 | RNVC: 9
4Q-9100-T: RNCC: 5 | RNVC: 9
12-100B: RNCC: 5 | RNVC: 9
LTB-10090: RNCC: 5 | RNVC: 9
LT-10090B: RNCC: 5 | RNVC: 9
8543-S: RNCC: 5 | RNVC: 9
493ST: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-903-6289
Conduit Outle Cover

009036289
680F: RNCC: 3 | RNVC: 2
K200-CM: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-901-7455
Me Conduit Assembly

009017455
2290053: RNCC: 3 | RNVC: 2
50187: RNCC: 5 | RNVC: 9
50187: RNCC: 5 | RNVC: 9

13 Feb 1967

5975-00-881-6270
Stuffing Tube

008816270
M24235-1-007SYMB0L2411: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1
815-1197030SYMB0L2411: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-878-4865
Electric Wall Plate

008784865
97091: RNCC: 3 | RNVC: 2
13-1-SS: RNCC: 5 | RNVC: 9
S7: RNCC: 5 | RNVC: 9
84004: RNCC: 5 | RNVC: 9
97091: RNCC: 5 | RNVC: 9
97091: RNCC: 5 | RNVC: 9
97091: RNCC: 5 | RNVC: 9
97091: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-868-8772
Elect Mounting Base

008688772
15045-3: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-839-9443
Conduit Outlet

008399443
FD1A: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
A3178930-2: RNCC: 5 | RNVC: 2
FD1: RNCC: 5 | RNVC: 2
FD1: RNCC: 5 | RNVC: 2
82-2729885-1: RNCC: 5 | RNVC: 2
FD1SA: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-821-5572
Rigid Metal Conduit

008215572
554821: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-800-8863
Electr Coupling Nut

008008863
10-40457-10S: RNCC: 3 | RNVC: 2
6780746-2: RNCC: 5 | RNVC: 2
10-40457-105: RNCC: 5 | RNVC: 2
6780746-2: RNCC: 5 | RNVC: 2
6780746-2: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-782-6142
Stuffing Tube

007826142
M19622-4-04: RNCC: 2 | RNVC: 2
MIL-S-19622: RNCC: 4 | RNVC: 1
M19622-4-04: RNCC: 5 | RNVC: 1
MILS19622D: RNCC: 5 | RNVC: 9

2 Feb 1968

5975-00-782-6141
Stuffing Tube

007826141
MIL-S-19622/4: RNCC: 4 | RNVC: 1
M19622-4-03: RNCC: 5 | RNVC: 1
M19622/4-03: RNCC: 5 | RNVC: 9
MIL-S-19622: RNCC: 5 | RNVC: 9
MILS19622D: RNCC: 5 | RNVC: 9

2 Feb 1968

5975-00-782-6139
Stuffing Tube

007826139
M19622-4-01: RNCC: 2 | RNVC: 2
MILS19622D: RNCC: 4 | RNVC: 1
M19622-4-01: RNCC: 5 | RNVC: 1

2 Feb 1968

5975-00-758-4549
Elect Mounting Base

007584549
522-4099-001: RNCC: 3 | RNVC: 2
790S-1: RNCC: 5 | RNVC: 1
522-4099-001: RNCC: 5 | RNVC: 9

6 Mar 1968

5975-00-758-3938
Blank Panel

007583938
C22-5005-002: RNCC: 3 | RNVC: 9
C22-5005-002: RNCC: 5 | RNVC: 2
175-146: RNCC: 5 | RNVC: 9
MEC175-146: RNCC: 5 | RNVC: 9
M1643-04: RNCC: 5 | RNVC: 9
824-3C: RNCC: 5 | RNVC: 9
5975PL0973237: RNCC: 6 | RNVC: 9
C22-5005-002: RNCC: C | RNVC: 1

9 May 1967

5975-00-684-6725
Elect Tiedown Strap

006846725
TY528M: RNCC: 3 | RNVC: 2
PLT4S-C: RNCC: 3 | RNVC: 2
0176735W00: RNCC: 5 | RNVC: 1
PLT4S-C: RNCC: 5 | RNVC: 1
RT-1400: RNCC: 5 | RNVC: 1
TY528M: RNCC: 5 | RNVC: 2
WX1189A00: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-682-0559
Electric Wall Plate

006820559
ANSI UL514A: RNCC: 3 | RNVC: 1
UL514A: RNCC: 3 | RNVC: 2
97101: RNCC: 5 | RNVC: 1
97101: RNCC: 5 | RNVC: 1
97101: RNCC: 5 | RNVC: 1
7533K52: RNCC: 5 | RNVC: 2
0205491 ITEM 4: RNCC: 5 | RNVC: 2
97101: RNCC: 5 | RNVC: 9
UL 514AANDUL 514C: RNCC: 5 | RNVC: 9
93101: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-681-5462
Condui Chase Nipple

006815462
848: RNCC: 3 | RNVC: 2
HA-407: RNCC: 5 | RNVC: 1
CN-250: RNCC: 5 | RNVC: 1
1610: RNCC: 5 | RNVC: 9
1108: RNCC: 5 | RNVC: 9
7-250: RNCC: 5 | RNVC: 9
957: RNCC: 5 | RNVC: 9
56: RNCC: 5 | RNVC: 9
CN-700: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-672-8582
Condui Fitting Assy

006728582
6780809-5: RNCC: 3 | RNVC: 2
6780809-5: RNCC: 5 | RNVC: 2
6780809-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-602-5945
Convolute Reinforce

006025945
CRN1137-3: RNCC: 3 | RNVC: 2
ST5M1570-003: RNCC: 5 | RNVC: 2

22 Jan 1975

5975-00-578-3667
Electrical Box Connector

005783667
A-A50552-00I-3-K: RNCC: 2 | RNVC: 2
A-A50552: RNCC: 4 | RNVC: 1
ST9075: RNCC: 5 | RNVC: 1
WF406: RNCC: 5 | RNVC: 9
8900-0464-002: RNCC: C | RNVC: 1
551-5871399 PC9: RNCC: C | RNVC: 1
3423: RNCC: C | RNVC: 1
PG90 75-STB: RNCC: C | RNVC: 1
SM-A-949385-14: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-553-7151
Electr Cab Le Nipple

005537151
AA-59178-2: RNCC: 2 | RNVC: 2
A-A-59178: RNCC: 4 | RNVC: 1
3013658: RNCC: 5 | RNVC: 2
3013658: RNCC: 5 | RNVC: 2
MS25171-2S: RNCC: 5 | RNVC: 2
3013658: RNCC: 5 | RNVC: 9
MS25171-2S: RNCC: 5 | RNVC: 9
5975PL1038290: RNCC: 6 | RNVC: 9
AN781-2: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-532-5870
Sleeve

005325870
5381109-2: RNCC: 3 | RNVC: 2
10-074696-005: RNCC: 5 | RNVC: 2
10-74696-5: RNCC: 5 | RNVC: 9
10-74696-5: RNCC: 5 | RNVC: 9
5381109-0002: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-520-2884
Fanning Strip

005202884
36-3911: RNCC: 3 | RNVC: 2

18 Jun 1969

5975-00-502-9311
Conduit Outlet

005029311
EABX26: RNCC: 3 | RNVC: 2
EABX26: RNCC: 5 | RNVC: 2

9 Jul 1974

5975-00-482-7064
Me Conduit Assembly

004827064
880111-101: RNCC: 3 | RNVC: 1
107001-DI0104: RNCC: 3 | RNVC: 2
162-700-10: RNCC: 5 | RNVC: 9

9 Mar 1972

5975-00-426-8794
Electrical Co Elbow

004268794
MFL50: RNCC: 3 | RNVC: 2
911498-1: RNCC: 5 | RNVC: 2
886348-1: RNCC: 5 | RNVC: 9
MF050: RNCC: 5 | RNVC: 9
810: RNCC: 5 | RNVC: 9
7-501: RNCC: 5 | RNVC: 9
N050R: RNCC: C | RNVC: 1

4 May 1974

5975-00-419-5701
Junction Box

004195701
233: RNCC: 3 | RNVC: 2
52171-1: RNCC: 5 | RNVC: 2
20-142057-01: RNCC: 5 | RNVC: 9

9 Dec 1970

5975-00-402-3329
Me Conduit Assembly

004023329
759-751: RNCC: 3 | RNVC: 2
7000-364-5-0220: RNCC: 5 | RNVC: 9

10 Apr 1970

5975-00-355-4748
Stuffing Tube Plug

003554748
9000S6202F73937REV1SYMB0L2410: RNCC: 3 | RNVC: 1
9000-S6202F73937 SIZE C: RNCC: 3 | RNVC: 2
9000S6202F73937SYMB0L24010: RNCC: 5 | RNVC: 1
17P61046-6483: RNCC: 5 | RNVC: 9
73937: RNCC: D | RNVC: 9

1 Jan 1963

NSN 5975-00-345-8055 003458055 STRAP,TIEDOWN,ELECT

5975-00-345-8055
Elect Tiedown Strap

003458055
10905840: RNCC: 3 | RNVC: 2
7146881: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-335-2588
Nonmetallic Conduit

003352588
UL 3 SIZE 1/4: RNCC: 3 | RNVC: 2
LOOM 1/4 ID: RNCC: 3 | RNVC: 9
06174AB: RNCC: 5 | RNVC: 9
HHT791: RNCC: 5 | RNVC: 9
8376125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-328-4423
Me Conduit Assembly

003284423
5-63974-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-317-5689
Fanning Strip

003175689
36-3910-1: RNCC: 3 | RNVC: 2

11 Nov 1973

5975-00-307-9419
Me Conduit Assembly

003079419
5-53607-4: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-307-9418
Me Conduit Assembly

003079418
5-53607-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-1699
Electr Coupling Nut

002961699
AN3054-12: RNCC: 2 | RNVC: 2
MS39078-12: RNCC: 5 | RNVC: 1
AN3054-12: RNCC: 5 | RNVC: 1
A-2208-12: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-288-5877
Nonmetallic Conduit

002885877
E1126-51-3: RNCC: 3 | RNVC: 2
010385-3: RNCC: 5 | RNVC: 9
27-10386-3: RNCC: 7 | RNVC: 2

12 Sep 1973

5975-00-280-9189
Electr Coupling Nut

002809189
AN3054-28: RNCC: 2 | RNVC: 2
118-22-28: RNCC: 5 | RNVC: 1
118-22-28: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-257-8055
Electrical Conductor Bushing

002578055
BBL300: RNCC: 3 | RNVC: 9
0508-1237-03: RNCC: 5 | RNVC: 2
C70412-30: RNCC: 5 | RNVC: 9
69-570-3: RNCC: 5 | RNVC: 9

29 Jun 1973

5975-00-242-4271
Conduit Outlet

002424271
AA50563-104ACCCF: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
C68: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE I DESIGN 4 STYLE C: RNCC: 5 | RNVC: 9
C67: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-241-6636
Electrical Cable Nipple

002416636
BU-26-0 BLACK: RNCC: 3 | RNVC: 2
BU-26-2 RED: RNCC: 3 | RNVC: 2

9 Jun 1973

5975-00-240-3859
Ground Rod

002403859
8566: RNCC: 3 | RNVC: 2
896393-1: RNCC: 5 | RNVC: 9
J1105: RNCC: 5 | RNVC: 9
9566: RNCC: 5 | RNVC: 9
9216: RNCC: 5 | RNVC: 9
9566: RNCC: 5 | RNVC: 9
J1105: RNCC: 5 | RNVC: 9
896393-1: RNCC: 5 | RNVC: 9
8566: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-228-0040
Rigid Metal Conduit

002280040
ANSI UL6: RNCC: 3 | RNVC: 1
UL61: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-224-5260
Ground Rod

002245260
148X: RNCC: 3 | RNVC: 1
9246: RNCC: 3 | RNVC: 1
SCD14158: RNCC: 3 | RNVC: 2
MX148G: RNCC: 5 | RNVC: 1
MILR11461: RNCC: 5 | RNVC: 9
2676: RNCC: 5 | RNVC: 9
MIL-R-12644: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-179-0302
Electrical Coupling

001790302
AA50553-1-2-K-02-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
2923: RNCC: 5 | RNVC: 1
5220: RNCC: 5 | RNVC: 1
FED-STD-156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9
AA50553-1-2-02-M: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-161-4947
Electrical Ferrule

001614947
4B69010-103A: RNCC: 3 | RNVC: 2

13 Jan 2004

5975-00-156-5737
Junction Box

001565737
4B69017-102A: RNCC: 3 | RNVC: 2

17 Jan 1973

5975-00-156-5734
Junction Box

001565734
4B69017-101A: RNCC: 3 | RNVC: 2

17 Jan 1973

5975-00-156-5731
Junction Box

001565731
4B69016-102A: RNCC: 3 | RNVC: 2

17 Jan 1973

5975-00-156-5726
Junction Box

001565726
4B69016-101A: RNCC: 3 | RNVC: 2

17 Jan 1973

5975-00-152-1119
Electrical Con Bend

001521119
ANSI UL514B: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-139-5334
Elbow Outlet Assembly

001395334
88914: RNCC: 3 | RNVC: 2
88914: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-124-2979
Junction Box

001242979
CU247: RNCC: 3 | RNVC: 2
CU347: RNCC: E | RNVC: 8

4 Jan 1973

5975-00-118-7060
Me Conduit Assembly

001187060
C223-0625-2800G3G3KC: RNCC: 3 | RNVC: 2

11 Oct 1968

5975-00-096-2717
Junction Box

000962717
M24142/5-002: RNCC: 2 | RNVC: 2
MIL-E-24142/5: RNCC: 4 | RNVC: 1
73853-10X16PC6: RNCC: 5 | RNVC: 1
3667-80PC1: RNCC: 5 | RNVC: 1
MS17234PC19: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-064-4772
Elect Box Connector

000644772
ST250: RNCC: 3 | RNVC: 1
5238: RNCC: 5 | RNVC: 2
4Q-250: RNCC: 5 | RNVC: 9
4Q-250: RNCC: 5 | RNVC: 9
LT-250: RNCC: 5 | RNVC: 9
11-250: RNCC: 5 | RNVC: 9
773735-8: RNCC: 7 | RNVC: 2

29 Jun 1967

5975-00-060-8019
Conduit Outlet

000608019
AA50563-101ALLLA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LL50MWITHK50: RNCC: 5 | RNVC: 1
LL17WITH170F: RNCC: 5 | RNVC: 1
RLL10WITH430: RNCC: 5 | RNVC: 9
WC586T: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-030-3026
Electrica Protector

000303026
223: RNCC: 3 | RNVC: 2
SCB68425: RNCC: 5 | RNVC: 2
SC-B-68425: RNCC: 5 | RNVC: 2
13583: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-027-4598
Elect Tiedown Strap

000274598
PLC1MS4-0: RNCC: 3 | RNVC: 2
4049-0027: RNCC: 3 | RNVC: 2
AS50931: RNCC: 5 | RNVC: 1
TY13-0: RNCC: 5 | RNVC: 2
TY13-0: RNCC: 5 | RNVC: 2
59A5A116: RNCC: 5 | RNVC: 2
PLC1MS4CM: RNCC: 5 | RNVC: 9
4049-0027: RNCC: 5 | RNVC: 9
59A5A116: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-003-5303
Elect Tiedown Strap

000035303
PRT2S-C: RNCC: 3 | RNVC: 2
9396168: RNCC: 5 | RNVC: 1
RCV-200: RNCC: 5 | RNVC: 2
WIT-50RR: RNCC: 5 | RNVC: 9
260682-1: RNCC: 7 | RNVC: 1

26 May 1972

5975-21-910-4487
Metallic Raceway

219104487
10504547: RNCC: 3 | RNVC: 2

8 May 1993

5975-20-003-7638
Junction Box

200037638
1414N4PHSSG4: RNCC: 3 | RNVC: 2

5 Dec 2007

5975-14-384-0730
Cable Marker Sleeve

143840730
0364 0002 004 2: RNCC: 3 | RNVC: 2
3121855: RNCC: 5 | RNVC: 2
694707-002: RNCC: 5 | RNVC: 9
364002REP2: RNCC: 5 | RNVC: 9

4 May 1983

5975-12-350-9200
Elect Mounting Base

123509200
5.802-028: RNCC: 3 | RNVC: 2

6 Jun 2000

5975-12-324-4930
Stuffing Tube

123244930
184/PG21Z22: RNCC: 3 | RNVC: 2

22 Feb 1991

5975-12-306-5075
Nonmetallic Conduit

123065075
1601296GRAU: RNCC: 3 | RNVC: 2
2030101029: RNCC: 3 | RNVC: 2
61721750: RNCC: 3 | RNVC: 2
167-11298: RNCC: 3 | RNVC: 2
1069636: RNCC: 5 | RNVC: 2
NS29: RNCC: 5 | RNVC: 2
2030.101.029: RNCC: 5 | RNVC: 9

6 Mar 1986

5975-12-196-2228
Stuffing Tube

121962228
490.01.0009: RNCC: 2 | RNVC: 2
DIN89280-K24-Z10-S2NI: RNCC: 2 | RNVC: 2
186PG16-Z10A: RNCC: 3 | RNVC: 2
HUGRO 129.2410.8: RNCC: 5 | RNVC: 2
490.01.0009: RNCC: 5 | RNVC: 2
KVM24-Z10A: RNCC: 5 | RNVC: 9
DIN89280-KM24X1,5-Z10: RNCC: 5 | RNVC: 9
DIN89280-KM24X1,5Z10: RNCC: 5 | RNVC: 9
KM24X1,5DIN89280-Z10: RNCC: 5 | RNVC: 9

14 Jun 1983

5975-01-620-3020
Flexi Metal Conduit

016203020
6D69482H01: RNCC: 3 | RNVC: 2
6D69279ITEM86: RNCC: 5 | RNVC: 2

16 Jul 2013

5975-01-619-8586
Electrical E Drawer

016198586
UD2: RNCC: 3 | RNVC: 2

20 Jun 2013

5975-01-619-7735
Electrical Bondnut

016197735
7529K322: RNCC: 3 | RNVC: 2

17 Jun 2013

5975-01-619-7731
Electrical Bondnut

016197731
7466K36: RNCC: 3 | RNVC: 2

17 Jun 2013

5975-01-619-7339
Cable Hanger

016197339
200949462-03: RNCC: 3 | RNVC: 2

14 Jun 2013

5975-01-619-7010
Junction Box

016197010
CS3265: RNCC: 3 | RNVC: 2
42501-1: RNCC: 5 | RNVC: 2
CS53265: RNCC: 5 | RNVC: 9
SK42501: RNCC: 7 | RNVC: 2

13 Jun 2013

5975-01-619-6209
Electrical-El Panel

016196209
SMA-00720: RNCC: 3 | RNVC: 2
ACS001001: RNCC: D | RNVC: 9

10 Jun 2013

5975-01-619-3531
Metallic Raceway

016193531
PPI-21: RNCC: 3 | RNVC: 2

28 May 2013

5975-01-619-2842
Rail Guide.Ele Stop

016192842
PPI-43: RNCC: 3 | RNVC: 2

23 May 2013

5975-01-619-2833
Rail Guide.Ele Stop

016192833
PPI-51: RNCC: 3 | RNVC: 2

23 May 2013

5975-01-617-7910
Electric Wall Plate

016177910
E98TSCN-CAR: RNCC: 3 | RNVC: 2

3 Apr 2013

5975-01-617-6289
Junction Box Assemb

016176289
2AJG12096: RNCC: 3 | RNVC: 2
2AJG12096: RNCC: 3 | RNVC: 9

28 Mar 2013

5975-01-617-6190
Tiedo Mounting Base

016176190
ABM112-S6: RNCC: 3 | RNVC: 2

28 Mar 2013

5975-01-617-3769
Stuffing Tube

016173769
060FS0014: RNCC: 3 | RNVC: 9

20 Mar 2013

5975-01-616-3145
Stuffing Tube

016163145
6D62105-001: RNCC: 3 | RNVC: 2

8 Feb 2013

5975-01-616-0754
Mounting Plate

016160754
7-611B11014-101: RNCC: 3 | RNVC: 2

31 Jan 2013

5975-01-615-8415
Me Conduit Assembly

016158415
23A02863-64: RNCC: 3 | RNVC: 2

24 Jan 2013

5975-01-615-7903
Interconnecti Cover

016157903
120-09796-0001: RNCC: 3 | RNVC: 2

23 Jan 2013

5975-01-615-3045
Electrical- Chassis

016153045
FH31310G1: RNCC: 3 | RNVC: 2

8 Jan 2013

5975-01-615-1860
Mounting Plate

016151860
A00076: RNCC: 3 | RNVC: 2
A00076: RNCC: 5 | RNVC: 2

3 Jan 2013

5975-01-615-0169
Elect Mounting Base

016150169
818-3784-010: RNCC: 3 | RNVC: 2
818-3784-010: RNCC: 5 | RNVC: 2

21 Dec 2012

5975-01-614-3286
Cable Marker Sleeve

016143286
HT-SCE-1K-3/16-2.0-9: RNCC: 3 | RNVC: 2

30 Nov 2012

5975-01-614-1377
No Conduit Assembly

016141377
R58HB40G77Y072C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 1

28 Nov 2012

5975-01-613-2784
Electrical Adapter

016132784
STR38: RNCC: 3 | RNVC: 2
535-07032-00: RNCC: 5 | RNVC: 2

5 Nov 2012

5975-01-612-7877
Electrical Equi Leg

016127877
057194-05-S: RNCC: 3 | RNVC: 2
057194-05-S: RNCC: 5 | RNVC: 9
057194 REV A: RNCC: D | RNVC: 9

20 Oct 2012

5975-01-612-6980
Electrical- Chassis

016126980
6578-1000-0500: RNCC: 3 | RNVC: 2
6012481-003: RNCC: 5 | RNVC: 2
S20A113: RNCC: 5 | RNVC: 9

18 Oct 2012

5975-01-612-6450
Guide Rail

016126450
980303-25-10: RNCC: 3 | RNVC: 2

17 Oct 2012

5975-01-610-9149
No Conduit Assembly

016109149
3260AS1328-41: RNCC: 1 | RNVC: 2
749-844-41: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

30 Aug 2012

5975-01-610-6720
No Conduit Assembly

016106720
3260AS1328-18: RNCC: 1 | RNVC: 2
749-844-18: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6717
No Conduit Assembly

016106717
3260AS1328-53: RNCC: 1 | RNVC: 2
749-844-53: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6710
No Conduit Assembly

016106710
3260AS1328-54: RNCC: 1 | RNVC: 2
749-844-54: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6705
No Conduit Assembly

016106705
3260AS1328-64: RNCC: 1 | RNVC: 2
749-844-64: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6700
No Conduit Assembly

016106700
3260AS1328-56: RNCC: 1 | RNVC: 2
749-844-56: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6694
No Conduit Assembly

016106694
3260AS1328-65: RNCC: 1 | RNVC: 2
749-844-65: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6691
No Conduit Assembly

016106691
3260AS1328-29: RNCC: 1 | RNVC: 2
749-844-29: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6683
No Conduit Assembly

016106683
3260AS1328-71: RNCC: 1 | RNVC: 2
749-844-71: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6333
Electrical- Chassis

016106333
40B160902-01: RNCC: 3 | RNVC: 2
40B160902-01: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-6331
Electrical- Chassis

016106331
40B160902-03: RNCC: 3 | RNVC: 2
40B160902-03: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-6329
Electrical- Chassis

016106329
40B160902-05: RNCC: 3 | RNVC: 2
40B160902-05: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-6328
Electrical- Chassis

016106328
40B160902-07: RNCC: 3 | RNVC: 2
40B160902-07: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-6324
Electrical- Chassis

016106324
40B160902-09: RNCC: 3 | RNVC: 2
40B160902-09: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-4889
No Conduit Assembly

016104889
3260AS1328-28: RNCC: 3 | RNVC: 2
749-844-28: RNCC: 5 | RNVC: 2

20 Aug 2012

5975-01-610-4883
No Conduit Assembly

016104883
3260AS1328-70: RNCC: 3 | RNVC: 2
749-844-70: RNCC: 5 | RNVC: 2

20 Aug 2012

5975-01-610-2908
Electrica Protector

016102908
71625: RNCC: 3 | RNVC: 2

14 Aug 2012

5975-01-610-1549
Me Conduit Assembly

016101549
3260AS1328-62: RNCC: 3 | RNVC: 2
749-844-62: RNCC: 3 | RNVC: 2

10 Aug 2012

5975-01-610-0014
Me Conduit Assembly

016100014
749-844-14: RNCC: 3 | RNVC: 2
3260AS1328-14: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-609-9801
Me Conduit Assembly

016099801
3260AS1328-15: RNCC: 3 | RNVC: 2
3260AS1328-15: RNCC: 5 | RNVC: 2

7 Aug 2012

5975-01-609-9580
Me Conduit Assembly

016099580
3260AS1328-9: RNCC: 3 | RNVC: 2
749-844-9: RNCC: 5 | RNVC: 2

6 Aug 2012

5975-01-608-6952
Stuffing Tube

016086952
2AAT12093: RNCC: 3 | RNVC: 2
2AAT12093: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-608-6950
Stuffing Tube

016086950
2AJG12028: RNCC: 3 | RNVC: 2
2AJG12028: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-607-9765
Stuffing Tube

016079765
JEK714: RNCC: 3 | RNVC: 2

19 Jun 2012

5975-01-607-9757
Stuffing Tube

016079757
JET714: RNCC: 3 | RNVC: 2
JET714: RNCC: 5 | RNVC: 2

19 Jun 2012

5975-01-607-2954
Elect Tiedown Strap

016072954
7177K81: RNCC: 3 | RNVC: 2
7177K34: RNCC: 3 | RNVC: 9
7177K81: RNCC: 5 | RNVC: 2

7 Jun 2012

5975-01-607-0279
Stuffing Tube

016070279
JEJ714: RNCC: 3 | RNVC: 2

30 May 2012

5975-01-606-8308
Ele Sealing Fitting

016068308
710-106NFA20B16C20: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-606-6206
Me Conduit Assembly

016066206
749-396: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6192
No Conduit Assembly

016066192
CA00886-84530: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6189
No Conduit Assembly

016066189
CA00886-84550: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-605-8727
Elect Mounting Base

016058727
901-060-335-104: RNCC: 3 | RNVC: 2

27 Apr 2012

5975-01-605-7760
Electrica Protector

016057760
737306: RNCC: 3 | RNVC: 2

25 Apr 2012

5975-01-605-6430
Tiedo Mounting Base

016056430
ABMT-S6-C20: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-604-9330
Rail Guide.Ele Stop

016049330
1201662: RNCC: 3 | RNVC: 2
277-5362-ND: RNCC: C | RNVC: 1

13 Apr 2012

5975-01-603-9119
Cable Spacer

016039119
000-50059-0000: RNCC: 3 | RNVC: 2
000-50059-0000: RNCC: 5 | RNVC: 9

21 Mar 2012

5975-01-599-9053
Junction Box

015999053
2203-800-002: RNCC: 3 | RNVC: 9
2202-900-002427: RNCC: D | RNVC: 9

27 Oct 2011

5975-01-596-1442
Electrical Equ Rack

015961442
RF1620-19: RNCC: 3 | RNVC: 2

30 Apr 2012

5975-01-596-1066
Electrical Equ Rack

015961066
RFCOVPAN20: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-595-5722
Electrical- Chassis

015955722
OS9700E-CMM: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-595-3469
Nonmetallic Conduit

015953469
6291E10-ITEM19: RNCC: 3 | RNVC: 2
SM-1216-BK: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-01-593-9612
Elect Mounting Base

015939612
872878-1: RNCC: 3 | RNVC: 2
872878-1: RNCC: 5 | RNVC: 2
872878: RNCC: D | RNVC: 9

22 Apr 2011

5975-01-593-8710
Ground Rod Section

015938710
LPIAHS0257: RNCC: 3 | RNVC: 2
LPIAHS0257: RNCC: 5 | RNVC: 9

20 Apr 2011

5975-01-593-5445
Electrical- Chassis

015935445
CACEN-602: RNCC: 3 | RNVC: 2

11 Apr 2011

5975-01-592-9727
Electrical-El Panel

015929727
PBEC-11-K: RNCC: 3 | RNVC: 2

30 Mar 2011

5975-01-592-9720
Electrical- Chassis

015929720
00033083: RNCC: 3 | RNVC: 2
05009B2000: RNCC: 7 | RNVC: 2

30 Mar 2011

5975-01-592-4906
Electrical Adapter

015924906
06628: RNCC: 3 | RNVC: 2

8 Mar 2011

5975-01-590-3959
Electrical- Chassis

015903959
SCP1893: RNCC: 3 | RNVC: 2

3 Dec 2010

5975-01-589-9607
Electrical-El Panel

015899607
071699-127-1: RNCC: 3 | RNVC: 2

9 Nov 2010

5975-01-589-7993
Electrical Locknut

015897993
7513K242: RNCC: 3 | RNVC: 2

5 Nov 2010

5975-01-589-4340
Junction Box

015894340
4007690: RNCC: 3 | RNVC: 2

26 Oct 2010

5975-01-589-3935
Elect Mounting Base

015893935
987-5006-100: RNCC: 3 | RNVC: 2

25 Oct 2010

5975-01-587-4453
Tiedo Mounting Base

015874453
MT2023007CST: RNCC: 3 | RNVC: 2
3570838C1: RNCC: 5 | RNVC: 2
3570838C1: RNCC: 5 | RNVC: 9

6 Aug 2010

5975-01-586-9888
Stuffing Tube

015869888
4305545: RNCC: 3 | RNVC: 2
4305545: RNCC: 5 | RNVC: 2

21 Jul 2010

5975-01-586-4313
Nonmetallic Raceway

015864313
T45BIW10-A: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-586-4069
Electrical-El Panel

015864069
FWME2: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-3402
Elect Tiedown Strap

015863402
3LV32: RNCC: 3 | RNVC: 2
TS-904: RNCC: 5 | RNVC: 2
TS-904: RNCC: 5 | RNVC: 9

25 Jun 2010

5975-01-585-2390
Nonmetallic Conduit

015852390
6V5818: RNCC: 3 | RNVC: 2
6V-5818: RNCC: 5 | RNVC: 2

20 May 2010

5975-01-585-2342
Elect Mounting Base

015852342
RF-5074VSM-03: RNCC: 3 | RNVC: 9
RF-5074VSM-03: RNCC: 5 | RNVC: 2
10181-5074-03: RNCC: 5 | RNVC: 9
5975PL1623699: RNCC: 6 | RNVC: 9
RF-5074VSM-03: RNCC: C | RNVC: 1

19 May 2010

5975-01-584-9552
Rigid Metal Conduit

015849552
6V5817: RNCC: 3 | RNVC: 2
6V-5817: RNCC: 5 | RNVC: 2

12 May 2010

5975-01-584-4246
Electrical Gr Plate

015844246
2107: RNCC: 3 | RNVC: 9
10003040: RNCC: 5 | RNVC: 2
2107: RNCC: 5 | RNVC: 2

26 Apr 2010

5975-01-583-9845
Electri Leg Section

015839845
1004004: RNCC: 3 | RNVC: 2
1004004: RNCC: 3 | RNVC: 9
3RP1903: RNCC: 5 | RNVC: 9

14 Apr 2010

5975-01-583-6840
Elect Mounting Tray

015836840
12005-1920-03: RNCC: 3 | RNVC: 2

1 Apr 2010

5975-01-583-6223
Nonmetallic Conduit

015836223
S2X-6308: RNCC: 3 | RNVC: 2
FIGURE 8-3 ITEM 15: RNCC: 5 | RNVC: 2

30 Mar 2010

5975-01-582-4484
Electrical-El Panel

015824484
5122361-1: RNCC: 3 | RNVC: 2

22 Feb 2010

5975-01-581-9658
Junction Box

015819658
02-2801894-1: RNCC: 3 | RNVC: 2

3 Feb 2010

5975-01-580-0466
Flexi Metal Conduit

015800466
19KP578: RNCC: 3 | RNVC: 2
19KP578: RNCC: 5 | RNVC: 9
301873: RNCC: D | RNVC: 9

2 Dec 2009

5975-01-579-6460
Elect Tiedown Strap

015796460
7567K56: RNCC: 3 | RNVC: 2
10007951: RNCC: 7 | RNVC: 2

19 Nov 2009

5975-01-578-1385
Elect Tiedown Strap

015781385
352370: RNCC: 3 | RNVC: 2
ZB0352370: RNCC: 5 | RNVC: 2
0352370: RNCC: 5 | RNVC: 2
Z352370: RNCC: 5 | RNVC: 9

28 Sep 2009

5975-01-577-7246
Electric Wall Plate

015777246
10002186: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-575-6834
Elect Tiedown Strap

015756834
AS33671-6-9: RNCC: 3 | RNVC: 2

13 Jul 2009

5975-01-574-6037
Electrical Con Bend

015746037
UA9AN: RNCC: 3 | RNVC: 2
UA9AN: RNCC: 5 | RNVC: 9

3 Jun 2009

5975-01-572-1230
Blank Panel

015721230
1508-43839-40: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-571-8930
Flexi Metal Conduit

015718930
6621371: RNCC: 3 | RNVC: 2

20 Feb 2009

5975-01-571-5959
Blank Panel

015715959
E7732A: RNCC: 3 | RNVC: 2
E7732A: RNCC: 3 | RNVC: 9

10 Feb 2009

5975-01-571-4416
Cable Marker Sleeve

015714416
SS7074-4558: RNCC: 3 | RNVC: 2
SS7074-4558: RNCC: 5 | RNVC: 2
SS7074: RNCC: D | RNVC: 9

4 Feb 2009

5975-01-569-3938
Junction Box

015693938
A-14128CHQRFGW: RNCC: 3 | RNVC: 2
1257 REV A ITEM 1: RNCC: 5 | RNVC: 2

1 Dec 2008

5975-01-568-9142
Electrical Co Clamp

015689142
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C11NH: RNCC: 3 | RNVC: 2

13 Nov 2008

5975-01-568-5900
Electrical Equipment Rack

015685900
3831779C92L: RNCC: 3 | RNVC: 2
3831779C91L: RNCC: 5 | RNVC: 9
3831779C92: RNCC: 5 | RNVC: 9

4 Nov 2008

5975-01-567-8252
Stuffing Tube

015678252
W084831726: RNCC: 3 | RNVC: 2
DAAK002129 SEQ #39: RNCC: 5 | RNVC: 2

8 Oct 2008

5975-01-566-0161
Junction Box

015660161
ZT104-120-18: RNCC: 3 | RNVC: 2

15 Aug 2008

5975-01-565-3020
Flexi Metal Conduit

015653020
95076735: RNCC: 3 | RNVC: 2

21 Jul 2008

5975-01-565-0313
Electric Wall Plate

015650313
1007294G-1: RNCC: 3 | RNVC: 2

9 Jul 2008

5975-01-563-2989
Conduit Outlet

015632989
GF15GYL: RNCC: 3 | RNVC: 2

7 May 2008

5975-01-563-0372
Cable Hanger

015630372
TYUW10310A: RNCC: 3 | RNVC: 2
8H-A33339: RNCC: D | RNVC: 9

30 Apr 2008

5975-01-562-9275
Elect Tiedown Strap

015629275
503423: RNCC: 3 | RNVC: 2

25 Apr 2008

5975-01-562-6109
Elect Tiedown Strap

015626109
435437A1: RNCC: 3 | RNVC: 2
473321C1: RNCC: 5 | RNVC: 9

14 Apr 2008

5975-01-562-5811
Me Conduit Assembly

015625811
23A03429-9: RNCC: 3 | RNVC: 2

11 Apr 2008

5975-01-562-2088
Tiedo Mounting Base

015622088
195A097-1: RNCC: 3 | RNVC: 2

2 Apr 2008

5975-01-562-0537
Pcb Motor Servo Pr

015620537
13D150311-01: RNCC: 3 | RNVC: 2

27 Mar 2008

5975-01-561-4436
Electrical Eq Shelf

015614436
644597: RNCC: 3 | RNVC: 2
1USHL-112: RNCC: 5 | RNVC: 9
205207-01: RNCC: 7 | RNVC: 2
205207: RNCC: D | RNVC: 9

5 Mar 2008

5975-01-560-5849
Electrical Adapter

015605849
CF13NA-BK: RNCC: 3 | RNVC: 2

5 Feb 2008

5975-01-560-0009
Electric Wall Plate

015600009
2061AS583-01: RNCC: 3 | RNVC: 2
2061AS583-01: RNCC: 5 | RNVC: 2
2061AS583-01: RNCC: 7 | RNVC: 2
2061AS583: RNCC: D | RNVC: 9

11 Jan 2008

5975-01-559-9961
Electrical-Electronic Equipment Panel

015599961
25122108: RNCC: 3 | RNVC: 2
85MT 445M: RNCC: 5 | RNVC: 9

11 Jan 2008

5975-01-559-7940
Elect Tiedown Strap

015597940
1A868: RNCC: 3 | RNVC: 2

7 Jan 2008

5975-01-559-7112
Ground Rod

015597112
90-019-397: RNCC: 3 | RNVC: 2
611265: RNCC: 5 | RNVC: 9

3 Jan 2008

5975-01-559-6756
Electrical Adapter

015596756
712FS178B1220-31: RNCC: 3 | RNVC: 2

31 Dec 2007

5975-01-559-5218
Electrical-El Panel

015595218
12053-1510-03: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-559-3942
Electrical Adapter

015593942
7798K42: RNCC: 3 | RNVC: 2

17 Dec 2007

5975-01-559-2110
Blank Panel

015592110
1590080: RNCC: 3 | RNVC: 2

10 Dec 2007

5975-01-557-4830
Cable Hanger

015574830
7607321-0032: RNCC: 3 | RNVC: 2
200-8180879 ITEM 13: RNCC: 5 | RNVC: 1
200-7607321 ITEM 32: RNCC: 5 | RNVC: 2

24 Oct 2007

5975-01-557-0996
Nonmetallic Conduit

015570996
0708160: RNCC: 3 | RNVC: 2
12759-00699: RNCC: C | RNVC: 1

11 Oct 2007

5975-01-557-0991
Nonmetallic Conduit

015570991
0713997: RNCC: 3 | RNVC: 2
3006114: RNCC: 7 | RNVC: 2
12759-00694: RNCC: C | RNVC: 1
S000082: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-556-6996
Elect Mounting Base

015566996
25157701: RNCC: 3 | RNVC: 2
10000270: RNCC: 5 | RNVC: 9
87RU 59M: RNCC: 5 | RNVC: 9

4 Oct 2007

5975-01-556-6719
Flexible Nonmetallic Conduit

015566719
584067C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-6189
Flexible Nonmetallic Conduit

015566189
3577746C1: RNCC: 3 | RNVC: 2
3577746C1: RNCC: 7 | RNVC: 2

3 Oct 2007

5975-01-556-6015
Crossarm Brace

015566015
3548585C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-5945
Cable Hanger

015565945
3536111C1: RNCC: 3 | RNVC: 2
MT2019006CST: RNCC: 5 | RNVC: 2
3536111C1: RNCC: 5 | RNVC: 9

3 Oct 2007

5975-01-555-8280
Cable Collar

015558280
BB-A40-1001: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-555-8272
Conduit Outlet

015558272
HBL520R9W: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-553-6695
Electrical- Chassis

015536695
258A679-1: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-01-553-0380
Elect Mounting Base

015530380
7-511A21641-17: RNCC: 3 | RNVC: 2
7-511A21641-1: RNCC: 5 | RNVC: 9

3 Jul 2007

5975-01-551-7329
Cable Hanger

015517329
TYUW10301A: RNCC: 3 | RNVC: 2
8H-A33335: RNCC: D | RNVC: 9

24 May 2007

5975-01-551-4652
Rigid Metal Conduit

015514652
EC6/101: RNCC: 3 | RNVC: 2
EC6/101: RNCC: 5 | RNVC: 2

17 May 2007

5975-01-550-0884
Electrical Adapter

015500884
TX-40-AB00-0808-H: RNCC: 3 | RNVC: 2

9 Apr 2007

5975-01-549-5655
Me Conduit Assembly

015495655
749-749: RNCC: 3 | RNVC: 2

23 Mar 2007

5975-01-547-2847
Tiedo Mounting Base

015472847
81N2596: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-547-2800
Elect Tiedown Strap

015472800
PLT.7M-M30: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-547-0361
Tiedo Mounting Base

015470361
TM1S6-M30: RNCC: 3 | RNVC: 2
TM1S6-30: RNCC: 5 | RNVC: 9

11 Jan 2007

5975-01-546-6103
Guide Rail

015466103
687-467E101: RNCC: 3 | RNVC: 2
687-467E-101-T3: RNCC: 5 | RNVC: 9

21 Dec 2006

5975-01-546-0506
Electrica Protector

015460506
A495620100: RNCC: 3 | RNVC: 2
CV185377: RNCC: 5 | RNVC: 2
A49562.0100: RNCC: 5 | RNVC: 2
A49562.0100: RNCC: 5 | RNVC: 2

5 Dec 2006

5975-01-543-9015
Electrical Co Clamp

015439015
30-302-2D10G08: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-542-1357
Interconnecting Box

015421357
92-3603: RNCC: 3 | RNVC: 2
98-5656: RNCC: 5 | RNVC: 9

24 Jul 2006

5975-01-541-8099
Elect Mounting Base

015418099
7519897: RNCC: 3 | RNVC: 2
7519897: RNCC: 5 | RNVC: 2

12 Jul 2006

5975-01-541-1581
Electrica Protector

015411581
0636-GG5-J07: RNCC: 3 | RNVC: 2
0636-GG5-J07: RNCC: 3 | RNVC: 9

16 Jun 2006

5975-01-540-2982
No Raceway Assembly

015402982
A479980200: RNCC: 3 | RNVC: 2
A47998.0200: RNCC: 5 | RNVC: 2
CV187336: RNCC: 5 | RNVC: 2
A47998.0200: RNCC: 5 | RNVC: 2

15 May 2006

5975-01-538-7938
Me Conduit Assembly

015387938
23A02829-11: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-538-4109
Elect Box Connector

015384109
LEVITON 2713: RNCC: 3 | RNVC: 9

21 Mar 2006

5975-01-537-3363
Cable Marker Sleeve

015373363
SS7074-2296: RNCC: 3 | RNVC: 2

2 Feb 2006

5975-01-537-2268
Electrical-El Panel

015372268
K8TP-3333R-1: RNCC: 3 | RNVC: 2

31 Jan 2006

5975-01-535-5467
Swing Panel Kit

015355467
A-JCDFK: RNCC: 3 | RNVC: 2

2 Dec 2005

5975-01-535-1023
Conduit Outle Cover

015351023
PLG100-S: RNCC: 3 | RNVC: 2
618AS253-4: RNCC: 3 | RNVC: 2
PLG100-S: RNCC: 5 | RNVC: 9

15 Nov 2005

5975-01-534-9905
Electrical Adapter

015349905
TX-40-AB00-2410-H: RNCC: 3 | RNVC: 2

9 Nov 2005

5975-01-534-1684
Electrical Adapter

015341684
TX-40-AB00-1008-H: RNCC: 3 | RNVC: 2

11 Oct 2005

5975-01-533-9666
Nonmetallic Conduit

015339666
IBC 1: RNCC: 3 | RNVC: 2
EMS-13: RNCC: 5 | RNVC: 9

3 Oct 2005

5975-01-533-3639
Electrical Co Elbow

015333639
4Q-950: RNCC: 3 | RNVC: 2
4Q-950: RNCC: 3 | RNVC: 9

13 Sep 2005

5975-01-533-1544
Nonmetallic Conduit

015331544
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1101B: RNCC: 3 | RNVC: 2
M81914/5-1101-BLK: RNCC: 3 | RNVC: 9
SAE AMS-T-81914/5: RNCC: 5 | RNVC: 1
IR-97046: RNCC: 5 | RNVC: 2
M81914/5-1101-0: RNCC: 5 | RNVC: 2
SAE AMS-T-81914/5: RNCC: 5 | RNVC: 9
M81914/5-1101-BLK: RNCC: 5 | RNVC: 9
M81914/5-1101-0: RNCC: 5 | RNVC: 9

2 Sep 2005

5975-01-532-6713
Electrical Adapter

015326713
712GS229NF2310-5: RNCC: 3 | RNVC: 2

16 Aug 2005

5975-01-532-6658
Electrical Adapter

015326658
712AJ229NF2206: RNCC: 3 | RNVC: 2

16 Aug 2005

5975-01-532-6271
Electrical Adapter

015326271
712CJ229NF2410: RNCC: 3 | RNVC: 2

15 Aug 2005

5975-01-532-1402
Elect Tiedown Strap

015321402
156-6175: RNCC: 3 | RNVC: 2

29 Jul 2005

5975-01-530-6456
Elect Mounting Tray

015306456
902663-803: RNCC: 3 | RNVC: 2

7 Jun 2005

5975-01-530-2621
Grounding Kit

015302621
100023: RNCC: 3 | RNVC: 2

19 May 2005

5975-01-528-9565
Elect Mounting Base

015289565
D47105: RNCC: 3 | RNVC: 2
47105: RNCC: 5 | RNVC: 9

30 Mar 2005

5975-01-526-2923
Stuffing Tube Plug

015262923
05098100: RNCC: 3 | RNVC: 2

14 Dec 2004

5975-01-526-2210
Electric Wall Plate

015262210
4512: RNCC: 3 | RNVC: 9

11 Dec 2004

5975-01-524-8300
Electrical Adapter

015248300
TX54AB00-2830-H: RNCC: 3 | RNVC: 2
ES7879-31C48W: RNCC: 5 | RNVC: 9
ES7879-31C48W: RNCC: C | RNVC: 1

19 Oct 2004

5975-01-524-6951
Elect Mounting Base

015246951
244A826-1: RNCC: 3 | RNVC: 2

13 Oct 2004

5975-01-524-4233
Elect Mounting Tray

015244233
6C405: RNCC: 3 | RNVC: 2
6C405: RNCC: 5 | RNVC: 2

1 Oct 2004

5975-01-524-2824
Strain Reli Bushing

015242824
3251: RNCC: 3 | RNVC: 2
HY3251: RNCC: 5 | RNVC: 9

28 Sep 2004

5975-01-523-4133
Electrical- Chassis

015234133
735353-1: RNCC: 3 | RNVC: 9
735353-1: RNCC: C | RNVC: 1
735353: RNCC: D | RNVC: 9

1 Sep 2004

5975-01-523-1940
Cable Marker Sleeve

015231940
THS-635W: RNCC: 3 | RNVC: 2

24 Aug 2004

5975-01-522-5938
Me Conduit Assembly

015225938
23A02863-70: RNCC: 3 | RNVC: 2

5 Aug 2004

5975-01-522-3892
Electrica Protector

015223892
660-024NF13U7-05: RNCC: 3 | RNVC: 2

29 Jul 2004

5975-01-521-8030
Junction Box

015218030
250-028908-10: RNCC: 3 | RNVC: 2

6 Jul 2004

5975-01-521-4301
Electrical- Chassis

015214301
D-3611: RNCC: 3 | RNVC: 9
10-3612-1A ITEM 15: RNCC: 5 | RNVC: 9

22 Jun 2004

5975-01-520-7197
Electrical- Chassis

015207197
A9-TO4017: RNCC: 3 | RNVC: 2

24 May 2004

5975-01-519-8736
Electrical- Chassis

015198736
519335-801: RNCC: 3 | RNVC: 2

5 May 2004

5975-01-518-7322
Electrical E Drawer

015187322
H677-2701-5: RNCC: 3 | RNVC: 2
VTA98013-01: RNCC: 5 | RNVC: 2
569-7067781-5: RNCC: 7 | RNVC: 2

22 Mar 2004

5975-01-516-9345
Electrical- Chassis

015169345
145E2221-1: RNCC: 3 | RNVC: 2

26 Jan 2004

5975-01-516-3152
Flexi Metal Conduit

015163152
UA-OR-1/2: RNCC: 3 | RNVC: 2
U.A.-O.R. TRADE SIZE 1/2: RNCC: 5 | RNVC: 2
90006E1801-2: RNCC: 7 | RNVC: 2

31 Dec 2003

5975-01-514-5539
Electrica Protector

015145539
M24705/1BN6055: RNCC: 2 | RNVC: 2
M24705/1-BN6055: RNCC: 2 | RNVC: 2
MIL-DTL-24705/1: RNCC: 4 | RNVC: 1
766701 PC. NO. 55: RNCC: 5 | RNVC: 1
60/55: RNCC: 5 | RNVC: 9
MIL-P-24705/1: RNCC: 5 | RNVC: 9

29 Oct 2003

5975-01-513-7634
Spacer Hinge

015137634
8036672: RNCC: 3 | RNVC: 2
D70166: RNCC: 5 | RNVC: 2
8036672: RNCC: 5 | RNVC: 9

6 Oct 2003

5975-01-513-0981
Guide Rail

015130981
1492-DR3: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-01-513-0417
Elect Tiedown Strap

015130417
7130K55: RNCC: 3 | RNVC: 2

16 Sep 2003

5975-01-512-7794
Flexible Metal Conduit Assembly

015127794
CA00884-4D3WG4W00450: RNCC: 3 | RNVC: 2
CA00884-4D3WG4W00450: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-3607
Coupling Nut Clamp

015123607
GMA.1B.054.DN: RNCC: 3 | RNVC: 2
GMA.IB.054.DN: RNCC: 5 | RNVC: 9

28 Aug 2003

5975-01-511-7043
Interconnecting Box

015117043
239A805-1: RNCC: 3 | RNVC: 2

14 Aug 2003

5975-01-506-4091
Electrical Cabinet

015064091
2112-3037: RNCC: 3 | RNVC: 9
2112-3037: RNCC: 5 | RNVC: 2
2112-3037: RNCC: C | RNVC: 1

28 Mar 2003

5975-01-504-7503
Junction Box

015047503
1084-12CHC: RNCC: 3 | RNVC: 2

7 Feb 2003

5975-01-504-5475
Elect Mounting Base

015045475
200-85317-102: RNCC: 3 | RNVC: 2
247-1026-020: RNCC: 5 | RNVC: 1
MT6-8371-101: RNCC: 5 | RNVC: 1
247-1026: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-503-9451
Elect Tiedown Strap

015039451
T50L9M4: RNCC: 3 | RNVC: 2

14 Jan 2003

5975-01-503-7177
Elect Tiedown Strap

015037177
8584001: RNCC: 3 | RNVC: 2
8584001: RNCC: 5 | RNVC: 9

6 Jan 2003

5975-01-502-6088
Electrical Bushing

015026088
74B878001-171: RNCC: 1 | RNVC: 2
74B878001-171: RNCC: 3 | RNVC: 2
CTO905-06A: RNCC: 5 | RNVC: 2
CT0904-171: RNCC: 5 | RNVC: 9

14 Nov 2002

5975-01-501-4218
Two Way Connector

015014218
54506: RNCC: 3 | RNVC: 2

1 Oct 2002

5975-01-500-7273
Flexible Nonmetallic Conduit

015007273
13230E6820-4: RNCC: 3 | RNVC: 2
13160: RNCC: 5 | RNVC: 2
13230E6820: RNCC: D | RNVC: 9

9 Sep 2002

5975-01-500-1668
Elect Tiedown Strap

015001668
PLT2M-CO: RNCC: 3 | RNVC: 2
PLT2M-C0: RNCC: 3 | RNVC: 2
956004450-01: RNCC: 5 | RNVC: 2
PLT2M-CO: RNCC: 5 | RNVC: 2
7087178: RNCC: 5 | RNVC: 2

15 Aug 2002

5975-01-500-0690
Electrical Coupling

015000690
46685K464: RNCC: 3 | RNVC: 2

13 Aug 2002

5975-01-497-5606
Ground Rod Section

014975606
GDS58: RNCC: 3 | RNVC: 2
99002C8008-8: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

23 May 2002

5975-01-497-4823
Electrical E Drawer

014974823
H677-2201-23: RNCC: 3 | RNVC: 2
VTA98012-00: RNCC: 5 | RNVC: 2
569-7067768-23: RNCC: 5 | RNVC: 2
569-7067771-3: RNCC: 5 | RNVC: 2
H677-2401-3: RNCC: 5 | RNVC: 2
7067771: RNCC: D | RNVC: 9

21 May 2002

5975-01-495-8680
Electrical-Electronic Equipment Panel

014958680
00004A1712-1: RNCC: 3 | RNVC: 2
00004A1712-1: RNCC: 5 | RNVC: 2
00004A1712: RNCC: 5 | RNVC: 9
00004A1712: RNCC: 5 | RNVC: 9

27 Mar 2002

5975-01-495-5397
Elect Mounting Base

014955397
34077590-001: RNCC: 3 | RNVC: 2

19 Mar 2002

5975-01-495-3968
Cable Marker Sleeve

014953968
TY46MT: RNCC: 3 | RNVC: 2

14 Mar 2002

5975-01-495-3421
Elect Tiedown Strap

014953421
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-1-9: RNCC: 3 | RNVC: 2
AS33671-1-9: RNCC: 3 | RNVC: 9

13 Mar 2002

5975-01-495-2507
Elect Mounting Base

014952507
12422693: RNCC: 3 | RNVC: 2
12422693: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-494-2145
Electr Cable Nipple

014942145
212N2T14: RNCC: 3 | RNVC: 2
10607953: RNCC: 5 | RNVC: 2

4 Feb 2002

5975-01-493-6192
Elect Box Connector

014936192
9454167-10: RNCC: 3 | RNVC: 2
RSR-106-E: RNCC: 5 | RNVC: 2
DC2512: RNCC: 5 | RNVC: 2
9454167: RNCC: D | RNVC: 9

11 Jan 2002

5975-01-491-8520
Cable Marker Sleeve

014918520
HS190WE4WF152: RNCC: 3 | RNVC: 2
13160SOCN16100531-009: RNCC: 5 | RNVC: 2
16100531-009: RNCC: 5 | RNVC: 2

2 Nov 2001

5975-01-491-0717
Cable Hanger

014910717
022-01-009: RNCC: 3 | RNVC: 2

12 Oct 2001

5975-01-490-6156
Electrical-El Panel

014906156
822441-2: RNCC: 3 | RNVC: 2
822441: RNCC: D | RNVC: 9

2 Oct 2001

5975-01-490-0344
Electrical Co Elbow

014900344
710NJ361NF1316: RNCC: 3 | RNVC: 2
710NJ361: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-488-8247
Elect Tiedown Strap

014888247
PLB3S-M30: RNCC: 3 | RNVC: 2

5 Sep 2001

5975-01-486-6721
Cable Hanger

014866721
JCM-17774: RNCC: 3 | RNVC: 2
JCM-17774: RNCC: 5 | RNVC: 9

11 Jul 2001

5975-01-485-8080
Me Conduit Assembly

014858080
23A02336-32: RNCC: 3 | RNVC: 2
93160165: RNCC: 5 | RNVC: 1
3260AS397: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7932
Me Conduit Assembly

014857932
23A02336-34: RNCC: 3 | RNVC: 2
93160167: RNCC: 5 | RNVC: 1
3260AS399: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7922
Me Conduit Assembly

014857922
23A02336-51: RNCC: 3 | RNVC: 2
93160180: RNCC: 5 | RNVC: 1
3260AS418: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7728
Me Conduit Assembly

014857728
3260AS451: RNCC: 1 | RNVC: 2
23A02336-76: RNCC: 3 | RNVC: 2
93160203: RNCC: 5 | RNVC: 1

6 Jun 2001

5975-01-484-7703
Elect Tiedown Strap

014847703
6-850-000801: RNCC: 3 | RNVC: 2

8 May 2001

5975-01-483-0287
Nonmetallic Conduit

014830287
8376128: RNCC: 3 | RNVC: 2
8376128: RNCC: 5 | RNVC: 2

14 Mar 2001

5975-01-482-9629
Elect Tiedown Strap

014829629
PLP2S: RNCC: 3 | RNVC: 2
PLP2S-C: RNCC: 5 | RNVC: 1
SS-26803: RNCC: D | RNVC: 9

12 Mar 2001

5975-01-482-0543
Electric Wall Plate

014820543
5148-0: RNCC: 3 | RNVC: 2
62206-1: RNCC: 5 | RNVC: 1
62206-1: RNCC: 5 | RNVC: 9
WR281C: RNCC: 5 | RNVC: 9
WC2AV: RNCC: 5 | RNVC: 9
5148-0: RNCC: 5 | RNVC: 9
602206: RNCC: D | RNVC: 9

7 Feb 2001

5975-01-481-8425
Electrical- Chassis

014818425
752-9611-001: RNCC: 3 | RNVC: 2
752-9611: RNCC: D | RNVC: 9

29 Jan 2001

5975-01-481-4994
Tiedo Mounting Base

014814994
10029: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-01-480-9146
Elect Tiedown Strap

014809146
PLT.6SM-C: RNCC: 3 | RNVC: 2
PLT.6SM-C: RNCC: 5 | RNVC: 2
859-0539: RNCC: 5 | RNVC: 2
1296958: RNCC: 5 | RNVC: 2
686-903-9001: RNCC: 5 | RNVC: 2

11 Dec 2000

5975-01-480-6332
Elect Box Connector

014806332
802027107404-2: RNCC: 3 | RNVC: 2
21A45138-2: RNCC: 5 | RNVC: 2
380HA010NF2409F-7A: RNCC: 5 | RNVC: 9
380HA010NF2509F-7A: RNCC: C | RNVC: 1
802027107404: RNCC: D | RNVC: 9

29 Nov 2000

5975-01-480-5317
Elect Mounting Base

014805317
607F489 GR2 PC 02: RNCC: 3 | RNVC: 2
PTC-2150157: RNCC: 5 | RNVC: 2

27 Nov 2000

5975-01-479-2825
Strain Reli Bushing

014792825
9333103041: RNCC: 3 | RNVC: 2

17 Oct 2000

5975-01-479-0509
Stuffing Tube

014790509
CG-1250: RNCC: 3 | RNVC: 2
CG-1250: RNCC: 3 | RNVC: 9
A37710-004: RNCC: 5 | RNVC: 2

10 Oct 2000

5975-01-478-5123
Nonmetallic Conduit

014785123
120-001-24: RNCC: 3 | RNVC: 2
GS830BM7: RNCC: 5 | RNVC: 1
CONVOLEX-3/4-0-SPCS5807: RNCC: 5 | RNVC: 2
RT1150 CONVOLEX .75: RNCC: 5 | RNVC: 9
RT48 CONVOLEX .75: RNCC: 5 | RNVC: 9
GS830BM: RNCC: D | RNVC: 9

15 Sep 2000

5975-01-477-3404
Nonmetallic Conduit

014773404
9-333-102235: RNCC: 3 | RNVC: 2

7 Aug 2000

5975-01-477-1659
Electr Cable Nipple

014771659
7172000563: RNCC: 3 | RNVC: 2

1 Aug 2000

5975-01-476-2878
Junction Box

014762878
71695K21: RNCC: 3 | RNVC: 2

6 Jul 2000

5975-01-476-2877
Conduit Outle Cover

014762877
71695K23: RNCC: 3 | RNVC: 2

6 Jul 2000

5975-01-475-6579
Elect Box Connector

014756579
712AS263A2004-4B: RNCC: 3 | RNVC: 2
712-263: RNCC: D | RNVC: 9

8 Jun 2000

5975-01-473-8317
Electrical-El Panel

014738317
HM022-142-11: RNCC: 3 | RNVC: 2

18 Apr 2000

5975-01-472-9526
Elect Tiedown Strap

014729526
214LF002: RNCC: 3 | RNVC: 2
320-396-501-0: RNCC: 5 | RNVC: 2

22 Mar 2000

5975-01-472-9273
Elect Mounting Tray

014729273
7-511B25055-1: RNCC: 3 | RNVC: 2
91017-1: RNCC: 3 | RNVC: 9
91017-1: RNCC: 5 | RNVC: 9
7-511B25055-1: RNCC: 5 | RNVC: 9
7-511B25055: RNCC: D | RNVC: 9

22 Mar 2000

5975-01-472-1113
Electrical Co Clamp

014721113
30-302-1D12G03: RNCC: 3 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0207
Electrical Co Clamp

014720207
30-302-1D16G03: RNCC: 3 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2
30-302-1D16G03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0176
Electrical Co Clamp

014720176
30-302-2D06G12: RNCC: 3 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8663
Electrical Co Clamp

014718663
30-302-2D07G14: RNCC: 3 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
BACC10KP2D0714N: RNCC: 5 | RNVC: 9
BACC10KP3D0713N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8591
Electrical Co Clamp

014718591
30-302-2D18J06: RNCC: 3 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-470-4780
Cable Marker Sleeve

014704780
HT-SCE-1/8-2.0-9: RNCC: 3 | RNVC: 2
HT-SCE-1/8-2.0-9: RNCC: 5 | RNVC: 1
HT-SCE: RNCC: 5 | RNVC: 1

21 Dec 1999

5975-01-469-5558
Electr Cable Nipple

014695558
0298 4033: RNCC: 3 | RNVC: 2
5975PL0730638: RNCC: 6 | RNVC: 9
12460418: RNCC: D | RNVC: 9

15 Nov 1999

5975-01-469-3789
Electrica Protector

014693789
50-107-A06T: RNCC: 3 | RNVC: 2
50-093-A06T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-469-3752
Electrica Protector

014693752
50-093-A07T: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-01-467-8302
Elect Box Connector

014678302
255-DC2: RNCC: 3 | RNVC: 2

16 Sep 1999

5975-01-467-8298
Elect Box Connector

014678298
254-DC2: RNCC: 3 | RNVC: 2

16 Sep 1999

5975-01-465-0385
Electr Cable Nipple

014650385
224N3V14: RNCC: 3 | RNVC: 2
9325C08-1409-08: RNCC: 7 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

19 May 1999

5975-01-464-8681
Flexi Metal Conduit

014648681
7127K68: RNCC: 3 | RNVC: 2
7127K68: RNCC: 5 | RNVC: 1
9325C08-3023-02: RNCC: 7 | RNVC: 1
9325C08-3023: RNCC: D | RNVC: 9

12 May 1999

5975-01-464-8580
Nonmetallic Conduit

014648580
CL-516: RNCC: 3 | RNVC: 2
9325C08-3137-01: RNCC: 5 | RNVC: 2

12 May 1999

5975-01-462-9082
Elect Mounting Base

014629082
128AB80406-7: RNCC: 3 | RNVC: 2
128AB80406-7: RNCC: 5 | RNVC: 9

24 Feb 1999

5975-01-462-7334
Stuffing Tube

014627334
1990.5 SIZE E TYPE 67: RNCC: 3 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
1990.5 SIZE E TYPE 67: RNCC: 5 | RNVC: 2
9000S620274269-145: RNCC: 5 | RNVC: 2
1990.5 SIZE A TYPE 67: RNCC: 5 | RNVC: 9
9000S620274269: RNCC: D | RNVC: 9

16 Feb 1999

5975-01-461-4357
Me Conduit Assembly

014614357
227710-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-460-6572
Electrical Adapter

014606572
R-21: RNCC: 3 | RNVC: 2
0650150B: RNCC: 5 | RNVC: 9

12 Nov 1998

5975-01-458-8727
Junction Box

014588727
A-604CH: RNCC: 3 | RNVC: 2
A-604CH: RNCC: 5 | RNVC: 2
A-604CH: RNCC: 5 | RNVC: 2
A-604CH: RNCC: 5 | RNVC: 9

14 Sep 1998

5975-01-458-1901
Elect Mounting Tray

014581901
3063944: RNCC: 3 | RNVC: 2
3063944: RNCC: 5 | RNVC: 9

17 Aug 1998

5975-01-455-9634
Electrical-El Panel

014559634
82-2752480-1: RNCC: 3 | RNVC: 2

22 May 1998

5975-01-453-8007
Elect Mounting Base

014538007
202087-901: RNCC: 3 | RNVC: 2
202087-901: RNCC: 5 | RNVC: 9
697859-35: RNCC: 7 | RNVC: 2

11 Mar 1998

5975-01-453-5917
No Conduit Assembly

014535917
200AS349-040BH04054FA132: RNCC: 1 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 3 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 5 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 5 | RNVC: 2

5 Mar 1998

5975-01-452-6971
Electronic Jun Rack

014526971
DCR-1A-10: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-01-448-4536
Cable Hanger

014484536
CRES 316 6.5 IN. LG BAR: RNCC: 3 | RNVC: 1
A-101107462: RNCC: 3 | RNVC: 2
101-107-462: RNCC: 5 | RNVC: 9

29 Aug 1997

5975-01-446-3226
Switch Box Case

014463226
IH3-2-LM: RNCC: 3 | RNVC: 2
T14-L: RNCC: 5 | RNVC: 9

30 Jun 1997

5975-01-445-4400
Elect Mounting Base

014454400
16F2261-177: RNCC: 3 | RNVC: 2

2 Jun 1997

5975-01-444-9479
Elect Mounting Tray

014449479
752-9588-001: RNCC: 3 | RNVC: 2

20 May 1997

5975-01-440-4550
Electrical C Nipple

014404550
1.250 TRADE SIZE: RNCC: 3 | RNVC: 2
1.250 TRADE SIZE: RNCC: 5 | RNVC: 9
1741AS731-4: RNCC: 7 | RNVC: 2
1741AS731: RNCC: D | RNVC: 9

14 Jan 1997

5975-01-436-6716
Elect Tiedown Strap

014366716
MS3368-4-6D: RNCC: 3 | RNVC: 2
MS3368-4-6D: RNCC: 3 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 1
MS3368-4-6D: RNCC: 5 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 9
MS3367-4-7D: RNCC: 5 | RNVC: 9

25 Sep 1996

5975-01-436-3618
Junction Box

014363618
A606NFSS: RNCC: 3 | RNVC: 2
1741AS418-2: RNCC: 7 | RNVC: 2
1741AS418: RNCC: D | RNVC: 9

17 Sep 1996

5975-01-436-2767
Electrical Co Elbow

014362767
LMFL90-125: RNCC: 3 | RNVC: 9
1764AS331-4: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-436-2766
Electrical Co Elbow

014362766
LMFL90-200: RNCC: 3 | RNVC: 9
1764AS331-5: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-436-2750
Electrical Bushing

014362750
1741AS730-3: RNCC: 3 | RNVC: 2
185520-FB5100: RNCC: 5 | RNVC: 9
1741AS730-3: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-436-2330
Electrical Coupling

014362330
2.000 TRADE SIZE: RNCC: 3 | RNVC: 2
1741AS732-5: RNCC: 7 | RNVC: 2

14 Sep 1996

5975-01-434-0348
No Conduit Assembly

014340348
R58HB08F49W072A: RNCC: 3 | RNVC: 2
R58HB08F49W072A: RNCC: 5 | RNVC: 2
R58HB08F49W072A: RNCC: 5 | RNVC: 2
R58HB08F49W072A: RNCC: 5 | RNVC: 9

17 Jul 1996

5975-01-433-1493
Electrica Protector

014331493
676-8318-001: RNCC: 3 | RNVC: 2

21 Jun 1996

5975-01-432-4120
Conduit Outlet

014324120
11B254108: RNCC: 3 | RNVC: 2
5331-0: RNCC: 5 | RNVC: 2

5 Jun 1996

5975-01-432-1444
Blank Panel

014321444
A24P24: RNCC: 3 | RNVC: 2

28 May 1996

5975-01-430-7131
Electr Cable Nipple

014307131
1S-2294: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-430-7114
Cable Collar

014307114
5N-9068: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-430-7113
Cable Collar

014307113
5N-9070: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-422-7722
Tiedo Mounting Base

014227722
CB4021G3N16: RNCC: 3 | RNVC: 2

7 Dec 1995

5975-01-422-7095
No Conduit Assembly

014227095
R58HB18G45Y018C: RNCC: 3 | RNVC: 2
R58HB18G45Y018C: RNCC: 5 | RNVC: 9

6 Dec 1995

5975-01-422-6411
Blank Panel

014226411
652-7133-001: RNCC: 3 | RNVC: 2

5 Dec 1995

5975-01-420-8392
Switch Termin Cover

014208392
515866: RNCC: 3 | RNVC: 2
515866: RNCC: 5 | RNVC: 2
515866: RNCC: 5 | RNVC: 2

26 Oct 1995

5975-01-420-2800
Stuffing Tube Plug

014202800
717531136-009: RNCC: 3 | RNVC: 2

12 Oct 1995

5975-01-414-9766
Electr Cable Nipple

014149766
5728-005B: RNCC: 3 | RNVC: 2
666141: RNCC: 5 | RNVC: 9
5728-005B: RNCC: 5 | RNVC: 9

16 Jun 1995

5975-01-413-6423
Blank Panel

014136423
A24P16: RNCC: 3 | RNVC: 2

18 May 1995

5975-01-413-0605
Elect Box Connector

014130605
LT 501: RNCC: 3 | RNVC: 2
APC050: RNCC: 5 | RNVC: 9

4 May 1995

5975-01-413-0537
Electrical-El Panel

014130537
3335653-3: RNCC: 3 | RNVC: 2
3335653: RNCC: D | RNVC: 9

4 May 1995

5975-01-412-5859
No Raceway Assembly

014125859
ICF3EIE: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-407-5585
Switch Termin Cover

014075585
9325C08-1583-01: RNCC: 3 | RNVC: 2
5728B: RNCC: 3 | RNVC: 9

31 Jan 1995

5975-01-407-5579
Switch Termin Cover

014075579
9325C08-1584-01: RNCC: 3 | RNVC: 2
5728R: RNCC: 5 | RNVC: 9

31 Jan 1995

5975-01-406-6830
Elect Tiedown Strap

014066830
SST1.5M: RNCC: 3 | RNVC: 2
17642: RNCC: 5 | RNVC: 9

9 Jan 1995

5975-01-398-2690
Conduit Outlet

013982690
T75-M: RNCC: 3 | RNVC: 2
T75-M: RNCC: 5 | RNVC: 9

28 Oct 1994

5975-01-394-4068
Conduit Outlet

013944068
FDT-1-100: RNCC: 3 | RNVC: 2
FDT-3: RNCC: 5 | RNVC: 9
8611356-202: RNCC: D | RNVC: 9

9 Aug 1994

5975-01-390-3779
Elect Box Connector

013903779
3702-6: RNCC: 3 | RNVC: 2

18 May 1994

5975-01-389-8934
Electric Wall Plate

013898934
86004: RNCC: 3 | RNVC: 9

5 May 1994

5975-01-387-8490
Cable Inse Es Block

013878490
ESRM15: RNCC: 3 | RNVC: 2
ESRM15: RNCC: 5 | RNVC: 9

14 Mar 1994

5975-01-387-7511
Transit Frame

013877511
S-4: RNCC: 3 | RNVC: 2
S-4: RNCC: 5 | RNVC: 9

11 Mar 1994

5975-01-387-5090
Me Conduit Assembly

013875090
57350-34FT0IN: RNCC: 3 | RNVC: 2
57350-34: RNCC: 5 | RNVC: 2

5 Mar 1994

5975-01-387-4551
Me Conduit Assembly

013874551
57350-28FT0IN: RNCC: 3 | RNVC: 2
57350-28: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-4530
Me Conduit Assembly

013874530
57350-13FT0IN: RNCC: 3 | RNVC: 2
57350-13: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-386-0814
Stuffing Tube

013860814
41008368: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-01-385-0701
Electronic Jun Rack

013850701
210-196: RNCC: 3 | RNVC: 9

3 Jan 1994

5975-01-383-4480
Conduit Outlet

013834480
75452-5-A: RNCC: 3 | RNVC: 2
75452-5-A: RNCC: 5 | RNVC: 9

24 Nov 1993

5975-01-382-7688
Electrical Equ Foot

013827688
868786: RNCC: 3 | RNVC: 2

9 Nov 1993

5975-01-380-6521
Electrical- Chassis

013806521
77-081891-02: RNCC: 3 | RNVC: 2
77-081891-02: RNCC: 3 | RNVC: 9
77-081891-02: RNCC: 5 | RNVC: 2
10177067: RNCC: 6 | RNVC: 9

23 Sep 1993

5975-01-378-1011
Me Conduit Assembly

013781011
57350-09FTOIN: RNCC: 3 | RNVC: 2
POD-57350-09: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-0936
Me Conduit Assembly

013780936
57350-08FT0IN: RNCC: 3 | RNVC: 2
POD-57350-08: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-373-5516
Electrical Cabinet

013735516
A-36H30CLP: RNCC: 3 | RNVC: 2
A-36H30CLP: RNCC: 5 | RNVC: 9
255-5819 PIECE 3-28: RNCC: 5 | RNVC: 9

7 Apr 1993

5975-01-371-0217
Junction Box

013710217
A24H20ALP: RNCC: 3 | RNVC: 2

5 Feb 1993

5975-01-370-0442
Nonmetallic Raceway

013700442
35-2-125: RNCC: 3 | RNVC: 2
SW25939: RNCC: 7 | RNVC: 2

12 Jan 1993

5975-01-369-2908
Ground Rod

013692908
90001A3229: RNCC: 3 | RNVC: 2
90001A3229: RNCC: 5 | RNVC: 9

19 Dec 1992

5975-01-364-6946
Junction Box

013646946
5385-0: RNCC: 3 | RNVC: 2
889-L: RNCC: 5 | RNVC: 9
5-4-5121: RNCC: 7 | RNVC: 1

23 Sep 1992

5975-01-364-5613
Elect Box Connector

013645613
3234: RNCC: 3 | RNVC: 2

22 Sep 1992

5975-01-364-2051
Junction Box

013642051
6-176-000614: RNCC: 3 | RNVC: 2
2HG332: RNCC: 5 | RNVC: 2
2HG332: RNCC: 5 | RNVC: 9

14 Sep 1992

5975-01-363-5690
Electronic Jun Rack

013635690
CTJ3A04-4021: RNCC: 3 | RNVC: 2

1 Sep 1992

5975-01-362-7220
Cable Hanger

013627220
1220B0092: RNCC: 3 | RNVC: 2
1220B0092: RNCC: 5 | RNVC: 9

14 Aug 1992

5975-01-361-7092
Me Conduit Assembly

013617092
S81815B-08-CGM34: RNCC: 3 | RNVC: 2
71434-27: RNCC: 5 | RNVC: 2
5224209-27: RNCC: 5 | RNVC: 9
S81915B-08-M34: RNCC: 5 | RNVC: 9

24 Jul 1992

5975-01-360-9703
Elect Tiedown Strap

013609703
PLT1M-MP: RNCC: 3 | RNVC: 2
T853000010: RNCC: C | RNVC: 1

7 Jul 1992

5975-01-355-9666
Elect Mounting Base

013559666
UT21405-80: RNCC: 3 | RNVC: 2
GM500BD2: RNCC: 5 | RNVC: 2

27 Mar 1992

5975-01-355-3476
Elect Box Connector

013553476
2520-2: RNCC: 3 | RNVC: 2
2520-2: RNCC: 5 | RNVC: 2
2520-2: RNCC: 5 | RNVC: 2
6-294-007653: RNCC: 5 | RNVC: 9
2HG334: RNCC: C | RNVC: 1

14 Mar 1992

5975-01-354-7379
Me Conduit Assembly

013547379
251018-00720: RNCC: 3 | RNVC: 2
750-011NF20-72: RNCC: 5 | RNVC: 2
300038: RNCC: 5 | RNVC: 2
200186-D10720: RNCC: 5 | RNVC: 2
10250675-74: RNCC: 7 | RNVC: 2

5 Mar 1992

5975-01-354-1345
Cable Hanger

013541345
406-075-148-115: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-01-351-3873
Junction Box

013513873
808087-0-51: RNCC: 3 | RNVC: 2
3505-14ITEM99: RNCC: 3 | RNVC: 9
3505-14ITEM99: RNCC: C | RNVC: 1

8 Jan 1992

5975-01-350-6874
Elect Box Connector

013506874
HJ1001GPK25: RNCC: 3 | RNVC: 2
HJ1001G: RNCC: 5 | RNVC: 9
13229E0627: RNCC: 7 | RNVC: 2

20 Dec 1991

5975-01-350-1344
Electrical Co Union

013501344
A84052-1: RNCC: 3 | RNVC: 2
A84052-1: RNCC: 5 | RNVC: 9

11 Dec 1991

5975-01-346-1221
Conduit Outlet

013461221
TBD-146: RNCC: 3 | RNVC: 2
204-146: RNCC: 5 | RNVC: 2

27 Sep 1991

5975-01-343-2232
Mesh Sleeve

013432232
102-002-024: RNCC: 3 | RNVC: 2

8 Aug 1991

5975-01-339-2140
Junction Box Cover

013392140
100331: RNCC: 3 | RNVC: 2
100331/701914: RNCC: 5 | RNVC: 9
100331/701914: RNCC: 5 | RNVC: 9
100331/701914: RNCC: 5 | RNVC: 9

19 May 1991

5975-01-338-9190
Elect Tiedown Strap

013389190
23-09796-309: RNCC: 3 | RNVC: 2
08-402: RNCC: 3 | RNVC: 2

12 May 1991

5975-01-334-4817
Junction Box

013344817
SW30568: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-329-4578
Conduit Outlet

013294578
X83: RNCC: 3 | RNVC: 2

16 Nov 1990

5975-01-329-4573
Electrical Co Elbow

013294573
MFL93: RNCC: 3 | RNVC: 2

16 Nov 1990

5975-01-326-6507
Cable Shiel Adapter

013266507
GA/CSGA-K/NPT: RNCC: 3 | RNVC: 2
SEEPA-NF-K-A: RNCC: 5 | RNVC: 2
CSGA-K/NPT: RNCC: 5 | RNVC: 2
CSGA-K/NPT: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-325-6335
Cable Hanger

013256335
SCH-32B: RNCC: 3 | RNVC: 2

7 Sep 1990

5975-01-325-0634
Condui Chase Nipple

013250634
1668: RNCC: 3 | RNVC: 2
1107-DC: RNCC: 5 | RNVC: 9

28 Aug 1990

5975-01-324-0352
Electrical Co Clamp

013240352
141C960G01: RNCC: 3 | RNVC: 2
141C960G01: RNCC: 3 | RNVC: 9
141C960G01: RNCC: 5 | RNVC: 2

8 Aug 1990

5975-01-322-3272
Coupling Nut Clamp

013223272
CR4H-M: RNCC: 3 | RNVC: 2
CR4H-M: RNCC: 5 | RNVC: 2

3 Jul 1990

5975-01-321-3292
Junction Box Cover

013213292
T2048EJ: RNCC: 3 | RNVC: 2

15 Jun 1990

5975-01-320-4919
Electrical Co Elbow

013204919
50643HE2132: RNCC: 1 | RNVC: 2
710HD217NF2132: RNCC: 3 | RNVC: 2
710HE010NF2132: RNCC: 5 | RNVC: 9

26 May 1990

5975-01-320-4753
Me Conduit Assembly

013204753
5188105-148: RNCC: 1 | RNVC: 2
759-192-148: RNCC: 3 | RNVC: 2
206148-D10600: RNCC: 3 | RNVC: 2
206-148: RNCC: 5 | RNVC: 9
206148-D1600: RNCC: 5 | RNVC: 9

25 May 1990

5975-01-319-2562
Electrica Protector

013192562
12910395: RNCC: 3 | RNVC: 2
12910395: RNCC: 5 | RNVC: 2

4 May 1990

5975-01-318-1356
Electrical Co Elbow

013181356
146C766G01: RNCC: 3 | RNVC: 2
146C766G01: RNCC: 3 | RNVC: 9
146C766G01: RNCC: 5 | RNVC: 2
146C766G01: RNCC: 5 | RNVC: 2

13 Apr 1990

5975-01-313-8211
Junction Box

013138211
A1008CHNF: RNCC: 3 | RNVC: 2
515643-1: RNCC: 7 | RNVC: 2
A-10PB: RNCC: C | RNVC: 1
A1008CHNNF: RNCC: C | RNVC: 1

18 Jan 1990

5975-01-313-4766
Electrical Adapter

013134766
DBZM-5824: RNCC: 3 | RNVC: 2
CG128150: RNCC: 5 | RNVC: 9
1603AS274: RNCC: 7 | RNVC: 1
CG128150: RNCC: C | RNVC: 1

10 Jan 1990

5975-01-311-8622
Electrical Co Clamp

013118622
9-61-0010-00: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-308-8391
Electronic Jun Rack

013088391
CTJ-3D-03-4021: RNCC: 3 | RNVC: 2
ARMS-HN03: RNCC: 3 | RNVC: 2
SJT503301: RNCC: 3 | RNVC: 2
HS4778-103: RNCC: 5 | RNVC: 9
HS4778-103: RNCC: C | RNVC: 1

5 Oct 1989

5975-01-308-8387
Strain Reli Bushing

013088387
123-479: RNCC: 3 | RNVC: 2
123A479: RNCC: 5 | RNVC: 9

5 Oct 1989

5975-01-306-3777
Electrical-El Panel

013063777
EC-10440-1: RNCC: 3 | RNVC: 2

23 Aug 1989

5975-01-302-8286
Me Conduit Assembly

013028286
750-011NF20-69: RNCC: 3 | RNVC: 2
200186-DI0690: RNCC: 3 | RNVC: 2
10250675-70: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-302-7586
Electrical Equ Case

013027586
150-030554-002: RNCC: 3 | RNVC: 2
150-030554-001: RNCC: 5 | RNVC: 9

19 Jun 1989

5975-01-301-8598
Electrical Adapter

013018598
K15K0017-2MWF1: RNCC: 3 | RNVC: 2
K15K0017-2MWF1: RNCC: 3 | RNVC: 2
K15K0017-2MWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9
K15K0017: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-300-3139
Electrical-El Panel

013003139
715812-5: RNCC: 3 | RNVC: 2

12 May 1989

5975-01-298-0414
No Conduit Assembly

012980414
R85HB32B34X0245: RNCC: 3 | RNVC: 2
R58HB32B34X024: RNCC: 3 | RNVC: 9
R58HB32B34X024: RNCC: 5 | RNVC: 1
R58HB32B34X024: RNCC: 5 | RNVC: 1
R58HB: RNCC: 5 | RNVC: 9

9 Apr 1989

5975-01-297-6132
Electrical Adapter

012976132
100235-0030: RNCC: 3 | RNVC: 2
G63164-30: RNCC: 5 | RNVC: 2
CH09-0340-430: RNCC: 5 | RNVC: 2
100211-FB6200: RNCC: 5 | RNVC: 2
10250710-30: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-297-3871
Electrical Adapter

012973871
100212-FB6200: RNCC: 3 | RNVC: 2
100235-0031: RNCC: 5 | RNVC: 2
G63164-31: RNCC: 5 | RNVC: 2
10250710-31: RNCC: 7 | RNVC: 2

2 Apr 1989

5975-01-297-0497
Junction Box

012970497
6602853: RNCC: 3 | RNVC: 2
6602853: RNCC: 5 | RNVC: 9

28 Mar 1989

5975-01-290-7638
Termina End Section

012907638
1492N23: RNCC: 3 | RNVC: 2
1492-N23: RNCC: C | RNVC: 1

16 Dec 1988

5975-01-290-3679
Electrical-El Panel

012903679
70450-81111-042: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-288-9603
Electrical Coupling

012889603
A1022A157-3: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-288-6678
Blank Panel

012886678
A16P16: RNCC: 3 | RNVC: 2
E-16P16: RNCC: 5 | RNVC: 9
NP-1616: RNCC: 5 | RNVC: 9

11 Nov 1988

5975-01-288-4757
Elect Tiedown Strap

012884757
11441068-3: RNCC: 1 | RNVC: 2
MS3368-1-8A: RNCC: 3 | RNVC: 2

8 Nov 1988

Load More Results