What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 199 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 199of 491

5975-01-470-2994
Flexible Metal Conduit Assembly

014702994
230735-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-563: RNCC: 7 | RNVC: 2

14 Dec 1999

5975-01-467-7048
Blank Panel

014677048
J1507A: RNCC: 3 | RNVC: 2

10 Sep 1999

5975-01-470-2996
Flexible Metal Conduit Assembly

014702996
230738-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-551: RNCC: 7 | RNVC: 2

14 Dec 1999

5975-01-469-9763
Electrical Components Tie Down Strap

014699763
F11024-5: RNCC: 3 | RNVC: 2

2 Dec 1999

5975-01-103-3912
Stuffing Tube

011033912
119-05: RNCC: 3 | RNVC: 2

12 Nov 1980

5975-01-103-5397
Stuffing Tube

011035397
160-05: RNCC: 3 | RNVC: 2

13 Nov 1980

5975-00-265-0248
Conduit Outlet

002650248
122-1047-01: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-600-9375
Cable Marker Sleeve

016009375
125A7889P1: RNCC: 3 | RNVC: 2

3 Jan 2012

5975-01-601-5821
Electrical-Electronic Equipment Chassis

016015821
101ASM6039: RNCC: 3 | RNVC: 2
101ASM6039: RNCC: 5 | RNVC: 9

19 Jan 2012

5975-01-601-4985
Electrical Components Tie Down Strap

016014985
PLT8LH-C120: RNCC: 3 | RNVC: 2
PLY8LH-C120: RNCC: 3 | RNVC: 9

19 Jan 2012

5975-01-602-5839
Electrical Wall Plate

016025839
4001682: RNCC: 3 | RNVC: 2

1 Feb 2012

5975-01-500-9709
Junction Box

015009709
582595: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-01-241-9230
Electrical Conduit Locknut

012419230
NDN7: RNCC: 3 | RNVC: 2

4 Oct 1986

5975-01-601-3324
Electronic Junction Rack

016013324
AT-MCR1: RNCC: 3 | RNVC: 2
AT-MCR1-50: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-00-003-4899
Electrical Cable Nipple

000034899
222A032-3: RNCC: 3 | RNVC: 2
1107-2-B7: RNCC: 5 | RNVC: 2
222A-032-3: RNCC: 5 | RNVC: 2
1107-2-B7: RNCC: 5 | RNVC: 9

21 May 1972

5975-01-697-1730
Electrical Components Tie Down Strap

016971730
CABTIESS: RNCC: 3 | RNVC: 2
CABTIESS: RNCC: 5 | RNVC: 2

7 Sep 2021

5975-01-582-4858
Electrical-Electronic Equipment Chassis

015824858
779102-01: RNCC: 3 | RNVC: 2

23 Feb 2010

5975-01-582-5812
Electrical-Electronic Equipment Chassis

015825812
AJ948A: RNCC: 3 | RNVC: 2
HP STORAGEWORKS 2012: RNCC: 3 | RNVC: 2

26 Feb 2010

5975-01-584-0104
Electrical Equipment Rack

015840104
5406-02-0020: RNCC: 3 | RNVC: 2

14 Apr 2010

5975-01-584-0183
Electrical-Electronic Equipment Chassis

015840183
5406-09-0001: RNCC: 3 | RNVC: 2

14 Apr 2010

5975-01-584-3151
Electrical Components Tie Down Strap

015843151
R1-8-2-6: RNCC: 3 | RNVC: 2

22 Apr 2010

5975-01-583-7370
Junction Box Assembly

015837370
92550-02814-105: RNCC: 3 | RNVC: 2

5 Apr 2010

5975-01-584-8448
Electrical Equipment Cabinet

015848448
290651-110: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-555-8055
Blank Panel

015558055
APAN-19048-1: RNCC: 3 | RNVC: 2

13 Sep 2007

5975-01-556-8993
Chassis Electrical

015568993
R549005-01: RNCC: 3 | RNVC: 2

5 Oct 2007

5975-01-495-8395
Electrical-Electronic Equipment Chassis

014958395
687-3777-002: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-495-8427
Electrical-Electronic Equipment Chassis

014958427
546-6749-004: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-488-5023
Electrical-Electronic Equipment Chassis

014885023
709-102-021-1: RNCC: 3 | RNVC: 9
709-102-021-1: RNCC: 5 | RNVC: 9

27 Aug 2001

5975-01-297-9694
Electrical-Electronic Equipment Panel

012979694
35-877F02: RNCC: 3 | RNVC: 9

8 Apr 1989

5975-01-580-0748
Transit Frame

015800748
B-6X1 GALV: RNCC: 3 | RNVC: 2

3 Dec 2009

5975-01-581-2004
Electrical Cable Nipple

015812004
MS3420-20: RNCC: 3 | RNVC: 2

8 Jan 2010

5975-01-582-2499
Electrical-Electronic Equipment Chassis

015822499
KP724AV: RNCC: 3 | RNVC: 2

12 Feb 2010

5975-01-581-6563
Junction Box

015816563
914020-5: RNCC: 3 | RNVC: 2

25 Jan 2010

5975-01-582-1682
Electrical Equipment Rack

015821682
1970AS311-1: RNCC: 3 | RNVC: 2

10 Feb 2010

5975-01-552-2158
Blank Panel

015522158
62023663: RNCC: 3 | RNVC: 2

7 Jun 2007

5975-01-552-6205
Electrical Equipment Drawer

015526205
607F490G04: RNCC: 3 | RNVC: 1
636J002PC243: RNCC: 5 | RNVC: 1

20 Jun 2007

5975-01-551-3941
Blank Panel

015513941
2100042-101: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-553-6499
Electrical-Electronic Equipment Chassis

015536499
ACP-4000BP-30Z: RNCC: 3 | RNVC: 2

20 Jul 2007

5975-01-554-9238
Stuffing Tube

015549238
302-5911509PC6-39B-2: RNCC: 3 | RNVC: 1
AII-MTS-02-250APPNDXAITEM20: RNCC: 5 | RNVC: 1

23 Aug 2007

5975-01-577-8914
Electrical-Electronic Equipment Panel

015778914
61060225: RNCC: 3 | RNVC: 2

22 Sep 2009

5975-01-578-4639
Electrical Equipment Rack

015784639
HP RACK 10636 G2 SHOCK: RNCC: 3 | RNVC: 2
HP RACK 10636 G2 SHOCK: RNCC: 5 | RNVC: 9

7 Oct 2009

5975-01-578-5473
Junction Box Cover

015785473
913833-2: RNCC: 3 | RNVC: 2

9 Oct 2009

5975-01-577-9670
Electrical-Electronic Equipment Chassis

015779670
97600005: RNCC: 3 | RNVC: 2

23 Sep 2009

5975-01-580-0851
Electrical-Electronic Equipment Chassis

015800851
3-CHAS7: RNCC: 3 | RNVC: 9

3 Dec 2009

5975-01-579-6682
Electrical Components Tie Down Strap

015796682
SST1.5S-M: RNCC: 3 | RNVC: 2

19 Nov 2009

5975-01-234-6643
Wiring Duct

012346643
LD10LG6-A: RNCC: 3 | RNVC: 2

18 Jun 1986

5975-01-596-4920
Electrical-Electronic Equipment Chassis

015964920
X14: RNCC: 3 | RNVC: 9

18 May 2011

5975-13-002-0062
Junction Box

130020062
351: RNCC: 3 | RNVC: 2

1 Apr 1975

5975-01-573-1885
Electronic Equipment Mounting Tray

015731885
VM80H6: RNCC: 3 | RNVC: 9

10 Apr 2009

5975-15-200-5460
Electrical Equipment Rack

152005460
5975T72001593: RNCC: 3 | RNVC: 2

30 Jan 2006

5975-21-875-8482
Support Tube

218758482
AL1RD17: RNCC: 3 | RNVC: 2

17 May 1977

5975-21-879-3487
Junction Box

218793487
1754: RNCC: 3 | RNVC: 2
5975-6580: RNCC: 6 | RNVC: 9

26 Sep 1978

5975-01-572-1619
Electronic Junction Rack

015721619
RR1061-12: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-573-5146
Electronic Equipment Mounting Tray

015735146
32R0812: RNCC: 3 | RNVC: 2

25 Apr 2009

5975-12-318-8558
Electrical Conduit Bushing

123188558
DIN49005-PG16: RNCC: 2 | RNVC: 2

22 Aug 1989

5975-12-379-2467
Blank Panel

123792467
DK7156.035: RNCC: 3 | RNVC: 2
4028177165779: RNCC: 5 | RNVC: 2

7 Jul 2009

5975-12-374-7713
Stuffing Tube

123747713
5308956: RNCC: 3 | RNVC: 2

18 Mar 2008

5975-12-341-9573
Junction Box

123419573
6024009: RNCC: 3 | RNVC: 2
2392: RNCC: 5 | RNVC: 2

21 Nov 1996

5975-14-447-0572
Panneau Transport

144470572
44028871: RNCC: 3 | RNVC: 2
BG-P695: RNCC: 5 | RNVC: 2
44028871: RNCC: 5 | RNVC: 9
BG-P695: RNCC: 5 | RNVC: 9

25 Apr 1991

5975-37-513-2579
Mounting Base

375132579
A40001032: RNCC: 3 | RNVC: 2
A40001032: RNCC: 5 | RNVC: 2

27 Oct 2006

5975-99-811-6344
Electrical Cable Protector

998116344
32972T: RNCC: 3 | RNVC: 2
LV1VSM32972T: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-01-570-0810
Electrical Equipment Rack Base

015700810
14709-16: RNCC: 3 | RNVC: 2
FN360: RNCC: 5 | RNVC: 2

16 Dec 2008

5975-01-569-8013
Electrical Equipment Cabinet

015698013
14701-2: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-570-1244
Strain Electrical Conductor Clamp

015701244
AS21919WDG35: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-569-4005
Rigid Metal Conduit

015694005
994-0007: RNCC: 3 | RNVC: 2

1 Dec 2008

5975-01-570-9929
Electrical-Electronic Equipment Panel

015709929
10115707-103: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-570-0109
Electrical Equipment Mounting Base

015700109
2004020-019: RNCC: 3 | RNVC: 2

12 Dec 2008

5975-01-570-5615
Junction Box

015705615
1419M34G01: RNCC: 3 | RNVC: 2

6 Jan 2009

5975-01-572-0270
Junction Box Cover

015720270
9134: RNCC: 3 | RNVC: 2

25 Feb 2009

5975-01-571-3243
Electrical Box Connector

015713243
TCFS-30-19C-0-20-100-CH: RNCC: 3 | RNVC: 2

30 Jan 2009

5975-01-571-5064
Electrical Equipment Rack

015715064
21N321: RNCC: 3 | RNVC: 2

5 Feb 2009

5975-01-226-0821
Electrical Cable Nipple

012260821
202A174-25: RNCC: 3 | RNVC: 2
65050/6636: RNCC: 5 | RNVC: 2
A3/65050/6636: RNCC: 5 | RNVC: 2
107-1-G: RNCC: 5 | RNVC: 2
80TEC202A174-25-0: RNCC: 5 | RNVC: 2
107-1-G: RNCC: 5 | RNVC: 9
65050/6636: RNCC: 5 | RNVC: 9
A3/65050/6636: RNCC: 5 | RNVC: 9

12 Feb 1986

5975-01-227-4441
Capacitor Res Panel

012274441
7126671P2: RNCC: 3 | RNVC: 9

3 Mar 1986

5975-01-231-9080
Electrical Components Tie Down Strap

012319080
13225: RNCC: 3 | RNVC: 9

6 May 1986

5975-12-375-3806
Interconnecting Box

123753806
R092000A2: RNCC: 3 | RNVC: 2

27 May 2008

5975-99-404-0040
Stuffing Tube

994040040
RS75: RNCC: 3 | RNVC: 2
DRAWING:S1000672: RNCC: 5 | RNVC: 1
012WU-061: RNCC: 6 | RNVC: 9

16 Nov 2001

5975-15-007-7439
Electrical Equipment Cabinet

150077439
37-419: RNCC: 3 | RNVC: 2
37-419: RNCC: 3 | RNVC: 2

1 Mar 1980

5975-12-154-3194
Stuffing Tube

121543194
VS401T44: RNCC: 3 | RNVC: 9
VS0401T044: RNCC: 5 | RNVC: 2
VS0401T044: RNCC: 5 | RNVC: 9

30 May 1969

5975-14-488-5885
Couvercle Chemin

144885885
CHEMI92622A00: RNCC: 3 | RNVC: 2

21 May 1997

5975-14-577-4297
Electrical-Electronic Equipment Panel

145774297
335AA89: RNCC: 3 | RNVC: 2

17 Sep 2013

5975-14-567-6041
Electrical-Electronic Equipment Chassis

145676041
61044135AB: RNCC: 3 | RNVC: 2

29 Mar 2011

5975-22-611-6144
Junction Box

226116144
IN097326: RNCC: 3 | RNVC: 2

28 Sep 2005

5975-14-566-4147
Electrical Equipment Cabinet

145664147
08304: RNCC: 3 | RNVC: 9

10 Nov 2010

5975-12-365-9951
Switch Terminal Cover

123659951
9415450019: RNCC: 3 | RNVC: 2

24 Feb 2005

5975-15-161-8028
Posatore Heli-Coil

151618028
0952 152 141: RNCC: 3 | RNVC: 2

1 Oct 2000

5975-37-526-3321
Electrical Conductor Bushing

375263321
91025194: RNCC: 3 | RNVC: 2
91025194: RNCC: 5 | RNVC: 2

8 Jul 2013

5975-99-147-0721
Rigid Metal Conduit

991470721
110136-11603ND: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-99-900-7348
Switch Terminal Cover

999007348
N109486: RNCC: 3 | RNVC: 2
37A1413: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-22-605-8783
Electrical Fitting Mounting Base

226058783
1017037052: RNCC: 3 | RNVC: 2
5703302098359: RNCC: 5 | RNVC: 2

9 Dec 2003

5975-12-357-5034
Cable Hanger

123575034
JN1096E03: RNCC: 3 | RNVC: 2

27 Jun 2002

5975-14-564-7618
Electrical-Electronic Equipment Chassis

145647618
96198903AA: RNCC: 3 | RNVC: 2

3 Jun 2010

5975-12-180-0696
Electrical Box Connector

121800696
2611040: RNCC: 3 | RNVC: 2
7364: RNCC: 5 | RNVC: 2
7364: RNCC: 5 | RNVC: 2

17 Aug 1979

5975-17-110-5795
Rigid Metal Conduit

171105795
409.178.352.501: RNCC: 3 | RNVC: 2

20 Nov 1996

5975-14-423-9491
Goulotte Couvercle

144239491
535913: RNCC: 3 | RNVC: 2

5 May 1988

5975-01-568-3281
Number Strip

015683281
22-00052: RNCC: 3 | RNVC: 2

27 Oct 2008

5975-01-567-6461
Electrical Chassis

015676461
10-215123-1: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-216-9158
Electrical Components Tie Down Strap

012169158
PLT3I-C20: RNCC: 3 | RNVC: 2

18 Sep 1985

5975-99-630-6133
Electronic Equipment Mounting Tray

996306133
D53APH2: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-99-529-3009
Electrical Equipment Cabinet

995293009
007509646: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-37-508-2921
Cable Bracket

375082921
95008894: RNCC: 3 | RNVC: 2

26 Nov 2001

5975-15-192-1099
Chassiselectricalel

151921099
S7258W4003A3: RNCC: 3 | RNVC: 2

1 Mar 2010

5975-41-001-1658
Guide Rail

410011658
532290002050: RNCC: 3 | RNVC: 2

6 Nov 2009

5975-01-566-2236
Electrical Equipment Mounting Base

015662236
622-0682-001: RNCC: 3 | RNVC: 2

25 Aug 2008

5975-01-566-1307
Electrical Equipment Foot

015661307
749230-01: RNCC: 3 | RNVC: 2

20 Aug 2008

5975-01-565-8438
Electronic Junction Rack

015658438
6652-1100-050: RNCC: 3 | RNVC: 2

8 Aug 2008

5975-01-567-3194
Electrical Equipment Leg

015673194
327244-1: RNCC: 3 | RNVC: 2

23 Sep 2008

5975-01-567-3651
Electrical Box Connector

015673651
DBM-1208M: RNCC: 3 | RNVC: 2

24 Sep 2008

5975-01-567-8454
Electrical Equipment Cabinet

015678454
150-ED-1042: RNCC: 3 | RNVC: 2

8 Oct 2008

5975-01-533-7702
Electrical-Electronic Equipment Chassis

015337702
5211605-02: RNCC: 3 | RNVC: 2
5211605-02: RNCC: 5 | RNVC: 2

27 Sep 2005

5975-01-535-3991
Cable Marker Sleeve

015353991
M235A774-156: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-538-2935
Cable Marker Sleeve

015382935
11439543-631: RNCC: 3 | RNVC: 2

16 Mar 2006

5975-01-678-4904
Fanning Strip

016784904
1998M49G16: RNCC: 3 | RNVC: 2

8 Feb 2019

5975-01-681-5583
Electrical Equipment Mounting Base

016815583
TMP-00097-0000: RNCC: 3 | RNVC: 2

24 Jun 2019

5975-01-681-2055
Conduit Outlet Cover

016812055
IH3-2: RNCC: 3 | RNVC: 2

7 Jun 2019

5975-01-680-1578
Cable Hanger

016801578
SSH-114-3: RNCC: 3 | RNVC: 9

22 Apr 2019

5975-01-681-2063
Mounting Plate

016812063
XBANS35759: RNCC: 3 | RNVC: 2

7 Jun 2019

5975-01-679-2548
Electrical-Electronic Equipment Panel

016792548
145E2155-2: RNCC: 3 | RNVC: 2

15 Mar 2019

5975-01-678-5608
Electrical-Electronic Equipment Chassis

016785608
CHAS-MX80-P-S: RNCC: 3 | RNVC: 2
CHAS-MX80-P-S: RNCC: 5 | RNVC: 2

13 Feb 2019

5975-01-679-4624
Electrical-Electronic Equipment Panel

016794624
CA16792-002: RNCC: 3 | RNVC: 2

26 Mar 2019

5975-01-679-5363
Electrical-Electronic Equipment Chassis

016795363
CB90439-001: RNCC: 3 | RNVC: 2

28 Mar 2019

5975-01-685-9508
Electrical Conduit Coupling

016859508
611-026: RNCC: 3 | RNVC: 2

22 Jan 2020

5975-01-561-0297
Photo Switch Cells

015610297
TS12KIT: RNCC: 3 | RNVC: 2

22 Feb 2008

5975-01-563-2038
Boom Junction Box

015632038
53965: RNCC: 3 | RNVC: 2

5 May 2008

5975-01-563-4076
Electrical Bushing

015634076
RW309-12: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-4185
Electrical Bushing

015634185
RW85-29: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-564-0902
Ground Rod

015640902
SF82021: RNCC: 3 | RNVC: 2

4 Jun 2008

5975-01-562-2823
Frame

015622823
RGS-8X4: RNCC: 3 | RNVC: 9
301-7006850ITEM123: RNCC: 5 | RNVC: 1

3 Apr 2008

5975-01-537-6308
Flexible Metal Conduit Assembly

015376308
230741-DL0000: RNCC: 3 | RNVC: 2

15 Feb 2006

5975-01-529-0127
Electrical Equipment Rack

015290127
67384: RNCC: 3 | RNVC: 2

31 Mar 2005

5975-01-530-0106
Electrical Cable Protector

015300106
504355: RNCC: 3 | RNVC: 2

11 May 2005

5975-01-527-3906
Electrical-Electronic Equipment Chassis

015273906
IPC-602P3-30X: RNCC: 3 | RNVC: 2

31 Jan 2005

5975-01-528-8151
Electrical Equipment Rack

015288151
01.131.146.1R: RNCC: 3 | RNVC: 2

25 Mar 2005

5975-01-675-6671
Interconnecting Box

016756671
HBL60CM83A: RNCC: 3 | RNVC: 2

20 Sep 2018

5975-01-675-3860
Electrical-Electronic Equipment Chassis

016753860
28008-M3/M5: RNCC: 3 | RNVC: 2

7 Sep 2018

5975-01-675-1205
Switch Terminal Cover

016751205
AT4170: RNCC: 3 | RNVC: 2

23 Aug 2018

5975-01-678-0952
Electrical Equipment Mounting Base

016780952
TSE-RM-3: RNCC: 3 | RNVC: 2

22 Jan 2019

5975-01-678-0216
Switch Terminal Cover

016780216
UPA85674-1: RNCC: 3 | RNVC: 2

16 Jan 2019

5975-01-678-6576
Electrical-Electronic Equipment Chassis

016786576
CHAS-BP-MX960-ECM-S: RNCC: 3 | RNVC: 2
CHAS-BP-MX960-ECM-S: RNCC: 5 | RNVC: 2

19 Feb 2019

5975-01-678-3716
Ground Rod Section

016783716
83875: RNCC: 3 | RNVC: 2
83875: RNCC: 5 | RNVC: 2
83875: RNCC: 5 | RNVC: 9

4 Feb 2019

5975-01-678-0069
Electrical-Electronic Equipment Chassis

016780069
CHAS-BP-MX480-S: RNCC: 3 | RNVC: 2

16 Jan 2019

5975-01-676-7834
Electrical-Electronic Equipment Chassis

016767834
KT-ES632X12: RNCC: 3 | RNVC: 2

13 Nov 2018

5975-01-559-3422
Electrical-Electronic Equipment Chassis

015593422
FG2009-10: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-560-7849
Electrical-Electronic Equipment Panel

015607849
165E2023-1: RNCC: 3 | RNVC: 2

12 Feb 2008

5975-01-559-6231
Electrical-Electronic Equipment Chassis

015596231
AREMO-2173E: RNCC: 3 | RNVC: 2

27 Dec 2007

5975-01-526-9280
Flexible Metal Conduit Assembly

015269280
363844-2: RNCC: 3 | RNVC: 2

12 Jan 2005

5975-01-532-6480
Electronic Equipment Mounting Tray

015326480
83-1177-1: RNCC: 3 | RNVC: 2

15 Aug 2005

5975-01-534-4398
Electronic Equipment Mounting Tray

015344398
6199-64910-1: RNCC: 3 | RNVC: 2

21 Oct 2005

5975-01-673-0133
Electrical Conduit Adapter

016730133
36-010: RNCC: 3 | RNVC: 2

29 May 2018

5975-01-673-0051
Nonmetallic Raceway

016730051
1831: RNCC: 3 | RNVC: 2

25 May 2018

5975-01-673-8390
Contact Electric

016738390
854-002-05F: RNCC: 3 | RNVC: 2

28 Jun 2018

5975-01-674-3036
Electrical Equipment Cabinet

016743036
NBG241609: RNCC: 3 | RNVC: 2

20 Jul 2018

5975-01-495-1481
Electrical-Electronic Equipment Chassis

014951481
471659-1: RNCC: 3 | RNVC: 2

7 Mar 2002

5975-01-670-5704
Electrical Grounding Plate

016705704
423192: RNCC: 3 | RNVC: 2

27 Feb 2018

5975-01-672-8954
Electrical Cable Support

016728954
16E3142-41: RNCC: 3 | RNVC: 2

22 May 2018

5975-01-670-6836
Electrical Cable Nipple

016706836
A-A-59178-1C: RNCC: 2 | RNVC: 2

1 Mar 2018

5975-01-672-3356
Electrical-Electronic Equipment Chassis

016723356
986-0220-002: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-672-5589
Electrical Equipment Leg Section

016725589
7902AV81120-5: RNCC: 3 | RNVC: 2

8 May 2018

5975-01-672-4414
Electrical Equipment Rack

016724414
DRT1212C-V13: RNCC: 3 | RNVC: 2

2 May 2018

5975-01-540-2248
Electrical Tie Down Mounting Base

015402248
SB6000UG2NY2TP: RNCC: 3 | RNVC: 2
CB4020V3N8P750: RNCC: 3 | RNVC: 2
9D0271P102T: RNCC: 5 | RNVC: 2

11 May 2006

5975-01-540-9016
Junction Box

015409016
RTL-4200A: RNCC: 3 | RNVC: 2

7 Jun 2006

5975-01-542-1816
Electrical Tie Down Mounting Base

015421816
CB9257V3: RNCC: 3 | RNVC: 2
5975PL1856793: RNCC: 6 | RNVC: 9

25 Jul 2006

5975-01-489-0581
Electrical Components Tie Down Strap

014890581
PLT1M-M30: RNCC: 3 | RNVC: 2
PLT1M-M30: RNCC: 5 | RNVC: 2

10 Sep 2001

5975-01-494-2950
Electrical-Electronic Equipment Chassis

014942950
11454140: RNCC: 3 | RNVC: 2
11454140: RNCC: 5 | RNVC: 2

6 Feb 2002

5975-01-667-5524
Electrical Equipment Mounting Base

016675524
7251223-1: RNCC: 3 | RNVC: 2

20 Oct 2017

5975-01-668-8334
Interconnecting Box

016688334
1025345-01: RNCC: 3 | RNVC: 2

8 Dec 2017

5975-01-669-2595
Electrical-Electronic Equipment Panel

016692595
L48049G03: RNCC: 3 | RNVC: 2

3 Jan 2018

5975-01-668-9470
Electrical-Electronic Equipment Panel

016689470
712983-11: RNCC: 3 | RNVC: 2

13 Dec 2017

5975-01-669-6356
Electrical Cable Assembly Protector

016696356
C10: RNCC: 3 | RNVC: 2

17 Jan 2018

5975-01-538-6421
Electrical Equipment Cabinet

015386421
338043-B21: RNCC: 3 | RNVC: 2

28 Mar 2006

5975-01-539-7092
Conduit Outlet Cover

015397092
VOL-0250A: RNCC: 3 | RNVC: 9

28 Apr 2006

5975-01-485-8793
Cable Marker Sleeve

014858793
651672: RNCC: 3 | RNVC: 2

11 Jun 2001

5975-01-486-8937
Electrical-Electronic Equipment Chassis

014868937
101539: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-618-4954
Electrical Bonding Ring

016184954
1032137-001: RNCC: 3 | RNVC: 2

25 Apr 2013

5975-01-602-7731
Electrical Wall Plate

016027731
10012146: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-643-5578
Knockout Reducing Washer

016435578
WA 132: RNCC: 3 | RNVC: 2

6 Apr 2015

5975-01-654-4007
Electrical-Electronic Equipment Chassis

016544007
280571-01: RNCC: 3 | RNVC: 2

27 Apr 2016

5975-01-666-9658
Electrical Cable Support

016669658
16D4005-625: RNCC: 3 | RNVC: 2

28 Sep 2017

5975-01-537-5043
Electrical-Electronic Equipment Chassis

015375043
G581652-2: RNCC: 3 | RNVC: 2
G581652-1: RNCC: 5 | RNVC: 2
G581652-1: RNCC: 5 | RNVC: 2
G581652-2: RNCC: 5 | RNVC: 2

10 Feb 2006

5975-01-537-8023
Electronic Cabinet

015378023
BELKIN 42U PREMIUM ENCLOSURE: RNCC: 3 | RNVC: 2

24 Feb 2006

5975-01-538-7198
Elect Condu Adapter

015387198
HF10018741: RNCC: 3 | RNVC: 2

29 Mar 2006

5975-01-538-1039
Electronic Equipment Mounting Tray

015381039
R686-408-2-LO: RNCC: 3 | RNVC: 2
R686-408-2-LO: RNCC: 5 | RNVC: 2

10 Mar 2006

5975-01-537-9132
Electrical Equipment Cabinet

015379132
083701-0300: RNCC: 3 | RNVC: 9

2 Mar 2006

5975-01-566-0839
Electrical Conduit Adapter

015660839
712GS116A1932C3: RNCC: 3 | RNVC: 2

19 Aug 2008

5975-01-566-9053
Side Brace

015669053
770-10314: RNCC: 3 | RNVC: 2

12 Sep 2008

5975-01-565-3786
Stuffing Tube

015653786
4220356: RNCC: 3 | RNVC: 2
4220356: RNCC: 5 | RNVC: 9

23 Jul 2008

5975-01-657-2383
Electrical-Electronic Equipment Panel

016572383
280296-01: RNCC: 3 | RNVC: 2

4 Aug 2016

5975-01-535-3978
Cable Marker Sleeve

015353978
M235A774-154: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-534-9365
Flexible Nonmetallic Conduit

015349365
287N6102-33: RNCC: 3 | RNVC: 2

8 Nov 2005

5975-01-535-3977
Cable Marker Sleeve

015353977
M235A774-155: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-535-3952
Cable Marker Sleeve

015353952
M235A774-157: RNCC: 3 | RNVC: 2

28 Nov 2005

5975-01-536-1638
Electrical Equipment Cabinet

015361638
7285816G001: RNCC: 3 | RNVC: 2

21 Dec 2005

5975-01-536-2585
Electrical Equipment Rack

015362585
5HU50200-113: RNCC: 3 | RNVC: 2

23 Dec 2005

5975-01-560-4845
Electrical Equipment Rack

015604845
16U90A52-9: RNCC: 3 | RNVC: 2

31 Jan 2008

5975-01-561-8241
Electrical Components Tie Down Strap

015618241
PLC2H S25-TL0: RNCC: 3 | RNVC: 2

19 Mar 2008

5975-01-643-2052
Electrical-Electronic Equipment Chassis

016432052
2865655-2: RNCC: 3 | RNVC: 2

24 Mar 2015

5975-01-535-0663
Electrical-Electronic Equipment Panel

015350663
206460: RNCC: 3 | RNVC: 2
206460: RNCC: 3 | RNVC: 9

14 Nov 2005

5975-01-535-4533
Cable Spacer

015354533
LS7882-400: RNCC: 3 | RNVC: 2

30 Nov 2005

5975-01-551-3922
Blank Panel

015513922
2100026-102: RNCC: 3 | RNVC: 2

16 May 2007

5975-01-552-6337
Electrical-Electronic Equipment Chassis

015526337
X8099A-4: RNCC: 3 | RNVC: 2

20 Jun 2007

5975-01-552-8410
Junction Box

015528410
86301-487: RNCC: 3 | RNVC: 2

26 Jun 2007

5975-01-552-4064
Fire Detection Box

015524064
90-346: RNCC: 3 | RNVC: 2

13 Jun 2007

5975-01-691-8393
Electrical Components Tie Down Strap

016918393
L-14-50-0-D: RNCC: 3 | RNVC: 2

2 Nov 2020

5975-01-689-0576
Electronic Equipment Mounting Tray

016890576
5HK01980-101: RNCC: 3 | RNVC: 2

3 Jun 2020

5975-01-685-7115
Interconnecting Box

016857115
K10053807-501: RNCC: 3 | RNVC: 2

9 Jan 2020

5975-01-695-8250
Strain Electrical Conductor Clamp

016958250
1614-F: RNCC: 3 | RNVC: 2

24 Jun 2021

5975-01-696-9276
Electrical Equipment Mounting Base

016969276
A0003145: RNCC: 3 | RNVC: 2
A0003145: RNCC: 5 | RNVC: 2

25 Aug 2021

5975-01-696-9233
Electrical Equipment Mounting Base

016969233
3367187-7: RNCC: 3 | RNVC: 2

24 Aug 2021

5975-01-674-6860
Flexible Metal Conduit

016746860
449.400.020: RNCC: 3 | RNVC: 2

7 Aug 2018

5975-01-675-2450
Electrical Components Tie Down Strap

016752450
BT3LH-L0: RNCC: 3 | RNVC: 2

29 Aug 2018

5975-01-542-0915
Electrical Tie Down Mounting Base

015420915
LHMS-S6-D: RNCC: 3 | RNVC: 2

21 Jul 2006

5975-01-544-2382
Blank Panel

015442382
211930: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-545-4793
Chassis Assy

015454793
8052320: RNCC: 3 | RNVC: 2
T0072132: RNCC: 5 | RNVC: 2
T0072132: RNCC: 5 | RNVC: 2

14 Nov 2006

5975-01-524-6185
Electrical Equipment Rack

015246185
1746-A13: RNCC: 3 | RNVC: 2
698-7433: RNCC: 5 | RNVC: 2

8 Oct 2004

5975-01-543-0895
Electrical-Electronic Equipment Panel

015430895
146134-01: RNCC: 3 | RNVC: 2
146134-01: RNCC: 3 | RNVC: 9

29 Aug 2006

5975-01-672-6026
Junction Box Cover

016726026
BW929A: RNCC: 3 | RNVC: 2

9 May 2018

5975-01-677-7253
Electrical-Electronic Equipment Chassis

016777253
797739-B21: RNCC: 3 | RNVC: 2

3 Jan 2019

5975-01-674-9875
Raceway End Cap

016749875
1SNK900102R0000: RNCC: 3 | RNVC: 2

17 Aug 2018

5975-01-678-2686
Electrical Equipment Rack

016782686
RCA42812SPBE: RNCC: 3 | RNVC: 2
RAA42812PSB13: RNCC: 5 | RNVC: 2

29 Jan 2019

5975-01-674-9337
Conduit Outlet

016749337
319-6227-03: RNCC: 3 | RNVC: 2

15 Aug 2018

5975-01-520-4525
Electrical-Electronic Equipment Chassis

015204525
8196949G3: RNCC: 3 | RNVC: 2

12 May 2004

5975-01-521-4068
Electrical Equipment Rack

015214068
6278-12310-1: RNCC: 3 | RNVC: 2

21 Jun 2004

5975-01-664-0393
Electrical Equipment Rack

016640393
71500-22115-047: RNCC: 3 | RNVC: 2

2 Jun 2017

5975-01-670-3949
Electrical-Electronic Equipment Chassis

016703949
745TQ-R800B: RNCC: 3 | RNVC: 2

21 Feb 2018

5975-01-518-1592
Electrical Cable Nipple

015181592
OMBB: RNCC: 3 | RNVC: 2
OMBB: RNCC: 5 | RNVC: 2

3 Mar 2004

5975-01-516-3681
Rigid Metal Conduit Assembly

015163681
5HM40132-109: RNCC: 3 | RNVC: 2

5 Jan 2004

5975-01-518-2206
Electrical Equipment Rack

015182206
S20A115: RNCC: 3 | RNVC: 9

4 Mar 2004

5975-01-662-2847
Electrical-Electronic Equipment Panel

016622847
241-4626: RNCC: 3 | RNVC: 2

31 Mar 2017

5975-01-663-9474
Electrical Cable Nipple

016639474
CCB376M0N02W: RNCC: 3 | RNVC: 2
7422834874: RNCC: 5 | RNVC: 2
1563778: RNCC: 5 | RNVC: 2

31 May 2017

5975-01-662-2068
Electrical Equipment Cabinet

016622068
1000042: RNCC: 3 | RNVC: 2

29 Mar 2017

5975-01-663-2431
Electrical-Electronic Equipment Chassis

016632431
766557-0002: RNCC: 3 | RNVC: 2

2 May 2017

5975-00-501-0468
Stuffing Tube

005010468
232B1006: RNCC: 3 | RNVC: 9
232B1006: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-514-7802
Flexible Nonmetallic Conduit

015147802
749-656-3-32.00: RNCC: 3 | RNVC: 2
5D0555-4: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-514-7800
Flexible Nonmetallic Conduit

015147800
749-656-3-34.32: RNCC: 3 | RNVC: 2
5D0555-6: RNCC: 5 | RNVC: 2

4 Nov 2003

5975-01-515-8419
Electrical Box Connector

015158419
AIIMTS-02-218APPENDIX-BITEM007: RNCC: 3 | RNVC: 1
AA5053-III-1-P-02-S: RNCC: 5 | RNVC: 1

10 Dec 2003

5975-01-502-4126
Electrical Wall Plate

015024126
69-73300-1: RNCC: 3 | RNVC: 2

5 Nov 2002

5975-01-505-1774
Electrical-Electronic Equipment Panel

015051774
12019-4000-01: RNCC: 3 | RNVC: 2

25 Feb 2003

5975-01-656-8828
Electrical-Electronic Equipment Panel

016568828
2591443-010: RNCC: 3 | RNVC: 2

21 Jul 2016

5975-01-661-4329
Cable Hanger

016614329
AR8113A: RNCC: 3 | RNVC: 2

2 Mar 2017

5975-01-514-2062
Electrical-Electronic Equipment Chassis

015142062
2120516-3: RNCC: 3 | RNVC: 2

20 Oct 2003

5975-01-443-3044
Interconnecting Cabinet

014433044
3722: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-448-6952
Electrical Components Tie Down Strap

014486952
TY546M-2: RNCC: 3 | RNVC: 2
M4ZS460D8601: RNCC: 5 | RNVC: 2
M4ZS460D8601: RNCC: 5 | RNVC: 9

8 Sep 1997

5975-01-513-4165
Electrical-Electronic Equipment Chassis

015134165
764998: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-522-0541
Electrical Equipment Cabinet

015220541
004170: RNCC: 3 | RNVC: 2

15 Jul 2004

5975-01-522-1430
Electrical Equipment Cabinet

015221430
7244910: RNCC: 3 | RNVC: 2

20 Jul 2004

5975-01-556-8989
Ground Rod Section

015568989
HF1002223: RNCC: 3 | RNVC: 2

5 Oct 2007

5975-01-422-0151
Special * Box

014220151
208115-G01: RNCC: 3 | RNVC: 2

20 Nov 1995

5975-01-442-3052
Electrical-Electronic Equipment Panel

014423052
111-D6096-1: RNCC: 3 | RNVC: 2

11 Mar 1997

5975-01-441-8872
Flexible Metal Conduit Assembly

014418872
403848-13: RNCC: 3 | RNVC: 2

26 Feb 1997

5975-01-441-3094
Electrical Conduit Adapter

014413094
5165255: RNCC: 3 | RNVC: 2

7 Feb 1997

5975-01-461-6807
Electrical Components Tie Down Strap

014616807
SST1M-C00: RNCC: 3 | RNVC: 2

23 Dec 1998

5975-01-451-4799
Electrical-Electronic Equipment Chassis

014514799
11453321: RNCC: 3 | RNVC: 2

17 Dec 1997

5975-01-493-6271
Electrical Equipment Mounting Base

014936271
010-10156-00: RNCC: 3 | RNVC: 2

11 Jan 2002

5975-01-476-3975
Electronic Equipment Mounting Tray

014763975
1500-1570-001: RNCC: 3 | RNVC: 2

11 Jul 2000

5975-01-475-1999
Electronic Equipment Mounting Tray

014751999
41-01060-001: RNCC: 3 | RNVC: 2

24 May 2000

5975-01-476-8892
Electrical Equipment Mounting Base

014768892
913885-005: RNCC: 3 | RNVC: 2
913885-005: RNCC: 5 | RNVC: 2
913885-005: RNCC: 5 | RNVC: 2

25 Jul 2000

5975-01-478-4959
Junction Box Assembly

014784959
KC84351-003: RNCC: 3 | RNVC: 2

14 Sep 2000

5975-01-492-0071
Brush Housing Cover

014920071
2983-323: RNCC: 3 | RNVC: 2

8 Nov 2001

5975-01-510-6327
Electrical Components Tie Down Strap

015106327
70215K71: RNCC: 3 | RNVC: 2

23 Jul 2003

5975-01-488-7886
Stuffing Tube

014887886
04140: RNCC: 3 | RNVC: 9

4 Sep 2001

5975-01-472-2159
Electrical Equipment Rack

014722159
3351989-3: RNCC: 3 | RNVC: 2

23 Feb 2000

5975-01-466-4691
Electrical Grounding Plate

014664691
520388-1: RNCC: 3 | RNVC: 2

20 Jul 1999

5975-01-465-9420
Switch Terminal Cover

014659420
1715147-1: RNCC: 3 | RNVC: 2

28 Jun 1999

5975-01-484-4993
Cable Marker Sleeve

014844993
2540806-35: RNCC: 3 | RNVC: 2
2540806-25: RNCC: 5 | RNVC: 9

30 Apr 2001

5975-01-460-5694
Electrical Equipment Mounting Base

014605694
10372-0880-01: RNCC: 3 | RNVC: 2
RF-5211VM: RNCC: 5 | RNVC: 2

9 Nov 1998

5975-01-484-9437
Blank Panel

014849437
106844102: RNCC: 3 | RNVC: 2

10 May 2001

5975-01-487-6945
Cable Marker Sleeve

014876945
G23631: RNCC: 3 | RNVC: 2
G95986: RNCC: D | RNVC: 9

14 Aug 2001

5975-01-486-1703
Electrical Equipment Rack

014861703
659441: RNCC: 3 | RNVC: 2

20 Jun 2001

5975-00-421-9774
Stuffing Tube

004219774
90608D: RNCC: 3 | RNVC: 2

23 Dec 1970

5975-00-519-3050
Conduit Outlet

005193050
FDC2-75: RNCC: 3 | RNVC: 2

13 Aug 1974

5975-01-455-7654
Raceway Cover

014557654
8902-6: RNCC: 3 | RNVC: 2

14 May 1998

5975-01-459-3501
Electrical Equipment Cabinet

014593501
BTB-100541: RNCC: 3 | RNVC: 9
BTB-100541: RNCC: C | RNVC: 1

28 Sep 1998

5975-01-484-1282
Chassis Base

014841282
7A11800H02: RNCC: 3 | RNVC: 2

19 Apr 2001

5975-01-499-5806
Stuffing Tube

014995806
17P6E2022-505: RNCC: 3 | RNVC: 2

29 Jul 2002

5975-01-484-4745
Raceway Cover

014844745
106820003: RNCC: 3 | RNVC: 2

30 Apr 2001

5975-00-238-6010
Conduit Outlet

002386010
C50A: RNCC: 3 | RNVC: 2

13 Nov 1970

5975-01-204-1080
Stuffing Tube

012041080
G1343-A-5-B: RNCC: 3 | RNVC: 9

22 Mar 1985

5975-01-454-3682
Break-Out Box Assem

014543682
817-2068-001: RNCC: 3 | RNVC: 2

27 Mar 1998

5975-01-454-0644
Electrical Tie Down Mounting Base

014540644
CB4020V3N24: RNCC: 3 | RNVC: 2
9D0271-105: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-01-496-7772
Cable Terminal Chamber

014967772
XAGA500-43/8-150: RNCC: 3 | RNVC: 2
XAGA500-43/8-150: RNCC: 5 | RNVC: 2

25 Apr 2002

5975-01-496-1672
Electrical-Electronic Equipment Chassis

014961672
549-1685-005: RNCC: 3 | RNVC: 2
549-1685-000: RNCC: 5 | RNVC: 9

4 Apr 2002

5975-00-178-0596
Stuffing Tube

001780596
9S5010LALT17TYPE22SYMB0L1903: RNCC: 3 | RNVC: 2
9S5010LALT17TYPE22BSYMB0L1903: RNCC: 5 | RNVC: 2
146002-90: RNCC: 5 | RNVC: 9
146002-90: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-448-6946
Electrical Components Tie Down Strap

014486946
TY546M-6: RNCC: 3 | RNVC: 2
M4ZS460D8602: RNCC: 5 | RNVC: 2
M4ZS460D8602: RNCC: 5 | RNVC: 9

8 Sep 1997

5975-01-503-1893
Flexible Metal Conduit Assembly

015031893
225626-D10355: RNCC: 3 | RNVC: 2

6 Dec 2002

5975-01-570-4093
Electrical Equipment Cabinet Plenum Assy

015704093
204-57469-3: RNCC: 3 | RNVC: 2

29 Dec 2008

5975-01-569-6893
Electrical Equipment Shelf

015696893
60-604-02: RNCC: 3 | RNVC: 2
60-604-01: RNCC: 5 | RNVC: 9

5 Dec 2008

5975-01-569-4940
Electrical Bushing

015694940
RL163-81: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-570-0674
Stuffing Tube

015700674
MCG-11: RNCC: 3 | RNVC: 2
MCG-11: RNCC: 5 | RNVC: 9

16 Dec 2008

5975-01-229-0867
Electrical Equipment Cabinet

012290867
CY-8408/FSC: RNCC: 3 | RNVC: 2

26 Mar 1986

5975-01-571-5063
Electrical Equipment Rack

015715063
21N311: RNCC: 3 | RNVC: 2

5 Feb 2009

5975-01-588-2803
Electrical-Electronic Equipment Panel

015882803
549-3613-003: RNCC: 3 | RNVC: 2

10 Sep 2010

5975-01-571-5087
Chassis Base

015715087
897125-0004: RNCC: 3 | RNVC: 2

5 Feb 2009

5975-01-500-2430
Electrical-Electronic Equipment Chassis

015002430
2780133P02: RNCC: 3 | RNVC: 2

19 Aug 2002

5975-01-501-5237
Electrical Equipment Mounting Base

015015237
890F-8: RNCC: 3 | RNVC: 2
822-1210-001: RNCC: 5 | RNVC: 2

3 Oct 2002

5975-01-498-7293
Rigid Metal Conduit Assembly

014987293
5HB71102-281: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-499-9503
Electrical Equipment Cabinet

014999503
4205338Z02: RNCC: 3 | RNVC: 2

8 Aug 2002

5975-01-499-9148
Electrical-Electronic Equipment Panel

014999148
6482628T06: RNCC: 3 | RNVC: 2
64-82628T06: RNCC: 5 | RNVC: 9

7 Aug 2002

5975-01-570-9928
Electrical-Electronic Equipment Panel

015709928
10115707-102: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-571-8743
Guide Rail

015718743
1411.21.010: RNCC: 3 | RNVC: 9

19 Feb 2009

5975-01-534-4992
Electronic Equipment Mounting Tray

015344992
840-5004-010: RNCC: 3 | RNVC: 2

25 Oct 2005

5975-01-572-2216
Electrical-Electronic Equipment Chassis

015722216
101ASM4512: RNCC: 3 | RNVC: 2
101ASM4504: RNCC: 5 | RNVC: 9

4 Mar 2009

5975-01-572-0416
Electrical Equipment Rack

015720416
717797535-019: RNCC: 3 | RNVC: 2

25 Feb 2009

5975-01-572-1620
Electronic Junction Rack

015721620
RR1061-14: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-343-1304
Stuffing Tube

013431304
204-7187G18: RNCC: 3 | RNVC: 2
204-7187G18: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-345-6895
Stuffing Tube

013456895
3225B: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-345-6891
Stuffing Tube

013456891
3213B: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-360-0157
Stuffing Tube

013600157
9000S6202A74031/20: RNCC: 4 | RNVC: 1

17 Jun 1992

5975-01-498-8741
Rigid Metal Conduit

014988741
5HM40133-103: RNCC: 3 | RNVC: 2

2 Jul 2002

5975-01-499-3262
Rigid Metal Conduit

014993262
5HM40133-109: RNCC: 3 | RNVC: 2

18 Jul 2002

5975-01-499-1470
Electrical Components Tie Down Strap

014991470
10249-3105-02: RNCC: 3 | RNVC: 2

15 Jul 2002

5975-01-499-5476
Junction Box

014995476
EDC-02P-NH: RNCC: 3 | RNVC: 2

26 Jul 2002

5975-01-500-2227
Electrical Components Tie Down Strap

015002227
21048743-101: RNCC: 3 | RNVC: 2

16 Aug 2002

5975-01-499-6979
Stuffing Tube

014996979
17P6E2022-513: RNCC: 3 | RNVC: 2

1 Aug 2002

5975-01-433-2527
Electrical Equipment Foot

014332527
10208-1015: RNCC: 3 | RNVC: 2

25 Jun 1996

5975-01-260-7270
Stuffing Tube

012607270
J163-103: RNCC: 3 | RNVC: 2
710007-5: RNCC: 7 | RNVC: 2

4 Aug 1987

5975-01-284-6457
Conduit Outlet

012846457
GUA14: RNCC: 3 | RNVC: 2

28 Aug 1988

5975-01-278-2551
Electrical Equipment Drawer

012782551
132520G1: RNCC: 3 | RNVC: 1
132520GP1: RNCC: 5 | RNVC: 1

3 May 1988

5975-01-597-9848
Junction Box Assembly

015979848
R101275: RNCC: 3 | RNVC: 2
R101275: RNCC: 3 | RNVC: 9

27 Jun 2011

5975-01-601-5468
Electrical Equipment Cabinet

016015468
G769476-3: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-01-601-6632
Electrical-Electronic Equipment Chassis

016016632
A4H124-48: RNCC: 3 | RNVC: 2

19 Jan 2012

5975-00-881-6274
Stuffing Tube

008816274
M24235-1-009: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1
815-1197303SYMB0L2413: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-581-1443
Electrical Conductor Bushing

005811443
7012477P1: RNCC: 3 | RNVC: 2
7012477P1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-580-4948
Electrical Equipment Mounting Base

015804948
56408: RNCC: 3 | RNVC: 2
MT-7346/APX: RNCC: A | RNVC: 2

16 Dec 2009

5975-01-580-9614
Electrical Equipment Rack

015809614
AF070A: RNCC: 3 | RNVC: 2

31 Dec 2009

5975-00-995-2850
Electrical Conduit Adapter

009952850
E1110-355-14: RNCC: 3 | RNVC: 2
738761-05: RNCC: 7 | RNVC: 2

8 Apr 1967

5975-00-937-1088
Electrical Equipment Cabinet

009371088
SMD374602: RNCC: 3 | RNVC: 2

16 Nov 1966

5975-00-937-4506
Conduit Outlet

009374506
T28F0RM8: RNCC: 3 | RNVC: 2

21 Dec 1966

5975-01-505-2442
Cable Shield Adapter

015052442
SEEPA-SPN75-B-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-504-2199
Electrical-Electronic Equipment Chassis

015042199
KC88080-003: RNCC: 3 | RNVC: 2

22 Jan 2003

5975-00-604-0479
Junction Box Assembly

006040479
65550-11011-113: RNCC: 3 | RNVC: 2
65550-11011-113: RNCC: 8 | RNVC: 2

18 Jan 1975

5975-01-566-8129
Cable Guide

015668129
9058M17P003A: RNCC: 3 | RNVC: 2

10 Sep 2008

5975-01-565-9144
Electrical-Electronic Equipment Chassis

015659144
AA1100899-01: RNCC: 3 | RNVC: 2
AA1100899-01: RNCC: 5 | RNVC: 9

12 Aug 2008

5975-01-567-9475
Electrical-Electronic Equipment Chassis

015679475
SCXI-1001: RNCC: 3 | RNVC: 2
776571-06: RNCC: 5 | RNVC: 2

14 Oct 2008

5975-01-558-8827
Electrical-Electronic Equipment Chassis

015588827
ACU5000A: RNCC: 3 | RNVC: 2

28 Nov 2007

5975-00-591-5290
Flexible Metal Conduit Assembly

005915290
8B744165-31: RNCC: 3 | RNVC: 2

18 Oct 1968

5975-00-587-9669
Cable Strain Relief Bushing

005879669
CE88238: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-594-6282
Support Block

005946282
4150732: RNCC: 3 | RNVC: 2

3 Jan 1975

5975-01-556-2738
Electrical Equipment Rack

015562738
351D968G01: RNCC: 3 | RNVC: 2
351D968G01: RNCC: 3 | RNVC: 9

28 Sep 2007

5975-01-583-6939
Electrical Chassis

015836939
269273G1: RNCC: 3 | RNVC: 2
269273: RNCC: 5 | RNVC: 9

1 Apr 2010

5975-01-552-0483
Electrical-Electronic Equipment Panel

015520483
99047100-001: RNCC: 3 | RNVC: 2

4 Jun 2007

5975-01-553-4032
Electrical-Electronic Equipment Chassis

015534032
258A678-1: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-546-0794
Electrical Equipment Cabinet

015460794
1-800-001723: RNCC: 3 | RNVC: 2

6 Dec 2006

5975-01-549-4794
Mounting Latch

015494794
D7-ALM: RNCC: 3 | RNVC: 2

21 Mar 2007

5975-01-527-9189
Junction Box

015279189
17G695552-1: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-526-9884
Electrical-Electronic Equipment Chassis

015269884
17G551551-1: RNCC: 3 | RNVC: 2

13 Jan 2005

5975-01-528-0546
Electrical-Electronic Equipment Chassis

015280546
114E7851G2: RNCC: 3 | RNVC: 2

1 Mar 2005

5975-01-544-2385
Electrical-Electronic Equipment Chassis

015442385
211453: RNCC: 3 | RNVC: 2

5 Oct 2006

5975-01-519-5951
Electrical Equipment Shelf

015195951
114E2071-18: RNCC: 3 | RNVC: 2

26 Apr 2004

5975-01-517-9071
Electrical-Electronic Equipment Chassis

015179071
11441871: RNCC: 3 | RNVC: 2

24 Feb 2004

5975-01-518-9282
Blank Panel

015189282
1003064-002: RNCC: 3 | RNVC: 2

29 Mar 2004

5975-01-519-4291
Cable Marker Sleeve

015194291
10253825-002: RNCC: 3 | RNVC: 2

19 Apr 2004

5975-01-291-0357
Junction Cable Rack

012910357
002012: RNCC: 3 | RNVC: 1
2012: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-00-503-0962
Electrical Equipment Rack

005030962
S0D63676ANDGS55140: RNCC: 3 | RNVC: 2
S0D63676ANDGS55140: RNCC: 5 | RNVC: 9
S0D63676ANDGS55140: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-508-1505
Interconnecting Box

005081505
463004-110: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-171-6368
Cable Spacer

011716368
13030397: RNCC: 3 | RNVC: 2
13030397: RNCC: 5 | RNVC: 1
10087274: RNCC: 6 | RNVC: 9

11 Feb 1984

5975-01-260-3642
Electrical-Electronic Equipment Chassis

012603642
102600G4: RNCC: 3 | RNVC: 2
102600G4: RNCC: 5 | RNVC: 9

30 Jul 1987

5975-01-261-4700
Electrical-Electronic Equipment Chassis

012614700
0N313169: RNCC: 3 | RNVC: 2

13 Aug 1987

5975-00-522-5559
Flexible Metal Conduit Assembly

005225559
5334403-566: RNCC: 3 | RNVC: 2
5334403-566: RNCC: 5 | RNVC: 9
C175XX57M8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5566
Flexible Metal Conduit Assembly

005225566
5334403-684: RNCC: 3 | RNVC: 2
5334403-684: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5551
Flexible Metal Conduit Assembly

005225551
5334403-504: RNCC: 3 | RNVC: 2
5334403-504: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5558
Flexible Metal Conduit Assembly

005225558
5334403-556: RNCC: 3 | RNVC: 2
5334403-556: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-2044
Flexible Metal Conduit Assembly

005212044
5143436-2: RNCC: 3 | RNVC: 2
5143436-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-518-2128
Junction Box

005182128
5733: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-259-5220
Blade

012595220
8000-417E: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-259-5228
Blade

012595228
8000-417M: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-00-326-9070
Flexible Metal Conduit Assembly

003269070
5334403-598: RNCC: 3 | RNVC: 2
5334403-598: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-303-6764
Electrical Components Tie Down Strap

013036764
696-40527-4: RNCC: 3 | RNVC: 2
696-40527-4-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-00-319-6018
Flexible Nonmetallic Conduit

003196018
15042R: RNCC: 3 | RNVC: 9
15042R: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-208-9341
Stored Cables Cover

012089341
10178479-8: RNCC: 3 | RNVC: 2
EC1024688: RNCC: 5 | RNVC: 9

21 May 1985

5975-01-195-5072
Electrical Conduit Elbow

011955072
C22000-71: RNCC: 3 | RNVC: 9

30 Nov 1984

5975-01-141-4944
Electrical-Electronic Equipment Chassis

011414944
0N312328: RNCC: 3 | RNVC: 2
SA-2386/G: RNCC: 5 | RNVC: 2

30 Oct 1982

5975-00-440-2280
Junction Box

004402280
ASG10X8X4: RNCC: 3 | RNVC: 2

20 May 1974

5975-00-439-9332
Electrical Equipment Rack

004399332
DCR260: RNCC: 3 | RNVC: 2

12 Dec 1969

5975-01-204-7767
Cable Hanger

012047767
13075927-1: RNCC: 3 | RNVC: 2
13075927-1: RNCC: 5 | RNVC: 9

29 Mar 1985

5975-00-221-2421
Electrical Equipment Cabinet

002212421
C5-128: RNCC: 3 | RNVC: 2
C5128: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-671-2210
Electrical Equipment Mounting Base

016712210
822-1511-006: RNCC: 3 | RNVC: 2

20 Mar 2018

5975-01-666-9820
Electrical-Electronic Equipment Panel

016669820
3365560-1: RNCC: 3 | RNVC: 2

28 Sep 2017

5975-01-651-9124
Electrical Equipment Mounting Base

016519124
2879596: RNCC: 3 | RNVC: 2
2879596: RNCC: 5 | RNVC: 2

3 Feb 2016

5975-01-653-0070
Junction Box Assembly

016530070
328-302020-001: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-653-1483
Electronic Equipment Mounting Tray

016531483
MT6-6311-111: RNCC: 3 | RNVC: 2

14 Mar 2016

5975-01-663-7568
Interconnecting Box

016637568
1590WGFBK: RNCC: 3 | RNVC: 2

23 May 2017

5975-01-591-3961
Electrical-Electronic Equipment Panel

015913961
4285249: RNCC: 3 | RNVC: 2

25 Jan 2011

5975-01-663-5036
Stuffing Tube

016635036
350578: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-663-7719
Cord Assembly Fastener

016637719
7458K16: RNCC: 3 | RNVC: 2

23 May 2017

5975-01-607-5785
Metallic Raceway Assembly

016075785
1234607-1: RNCC: 3 | RNVC: 2
1234607-1: RNCC: 3 | RNVC: 9

8 Jun 2012

5975-01-611-2253
Electrical Fitting Mounting Base

016112253
D5142110208: RNCC: 3 | RNVC: 2

7 Sep 2012

5975-01-612-8159
Electrical Equipment Rack

016128159
383573-001: RNCC: 3 | RNVC: 2

22 Oct 2012

5975-01-677-9840
Junction Box

016779840
4D07914G01: RNCC: 3 | RNVC: 2

15 Jan 2019

5975-01-678-8725
Electrical-Electronic Equipment Panel

016788725
MIC-BLANK: RNCC: 3 | RNVC: 2
MIC-BLANK: RNCC: 5 | RNVC: 2

1 Mar 2019

5975-01-676-9978
Junction Box Assembly

016769978
70550-82063-046: RNCC: 3 | RNVC: 2

21 Nov 2018

5975-01-676-0733
Electrical Equipment Mounting Base

016760733
011-02425-00: RNCC: 3 | RNVC: 2

11 Oct 2018

5975-01-586-9741
Electrical Equipment Mounting Base

015869741
74A880836-1001: RNCC: 3 | RNVC: 2

21 Jul 2010

5975-01-607-2055
Blade Server

016072055
09205012-01: RNCC: 3 | RNVC: 1
ATC6239: RNCC: 5 | RNVC: 1
912136239: RNCC: D | RNVC: 9

5 Jun 2012

5975-01-646-9087
Switch Box Case

016469087
V-1092: RNCC: 3 | RNVC: 2

4 Aug 2015

5975-01-625-4894
Metallic Raceway

016254894
80038800032: RNCC: 3 | RNVC: 9

5 Feb 2014

5975-01-625-5886
Electrical-Electronic Equipment Chassis

016255886
BK831B: RNCC: 3 | RNVC: 2

7 Feb 2014

5975-01-651-8337
Electrical Equipment Rack

016518337
3362454-1: RNCC: 3 | RNVC: 2

1 Feb 2016

5975-01-650-9250
Electrical Cable Protector

016509250
2200523-201: RNCC: 3 | RNVC: 2

21 Dec 2015

5975-01-624-4917
Electrical-Electronic Equipment Chassis

016244917
P5507FT-C: RNCC: 3 | RNVC: 2

6 Jan 2014

5975-01-694-6168
Electrical Cable Protector

016946168
102716: RNCC: 3 | RNVC: 2

13 Apr 2021

5975-01-692-9074

19 Jan 2021

5975-01-696-1367
Electrical-Electronic Equipment Chassis

016961367
72D420228-2001: RNCC: 3 | RNVC: 2

12 Jul 2021

5975-01-696-6544
Electrical Equipment Shelf

016966544
1305AS1332-120: RNCC: 3 | RNVC: 2

9 Aug 2021

5975-01-695-5389
Electrical Equipment Rack

016955389
16E4148-1: RNCC: 3 | RNVC: 2

10 Jun 2021

5975-01-587-4980
Electrical Equipment Rack

015874980
1042: RNCC: 3 | RNVC: 2

9 Aug 2010

5975-01-601-5439
Electrical-Electronic Equipment Panel

016015439
86102-00: RNCC: 3 | RNVC: 9
86102-00: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-01-588-3383
Junction Box Terminal

015883383
TE-K60-4: RNCC: 3 | RNVC: 2

13 Sep 2010

5975-01-541-4056
Electrical Tie Down Mounting Base

015414056
SB6000UG2NY2P: RNCC: 3 | RNVC: 2
CB4020V3N8P: RNCC: 3 | RNVC: 2
9D0271P102: RNCC: 5 | RNVC: 2

26 Jun 2006

5975-01-643-8635
Electrical Equipment Drawer

016438635
00603000-04D: RNCC: 3 | RNVC: 2

14 Apr 2015

5975-01-542-2214
Electronic Junction Rack

015422214
32-104993-01: RNCC: 3 | RNVC: 2
32-104993-01: RNCC: 5 | RNVC: 9

26 Jul 2006

5975-01-644-7300
Transmission Line Grounding Set

016447300
GK-SUNV: RNCC: 3 | RNVC: 2
GK-SUNV: RNCC: 5 | RNVC: 2

18 May 2015

5975-01-649-5674
Mounting Plate

016495674
284A3224-6: RNCC: 3 | RNVC: 2

3 Nov 2015

5975-01-537-5592
Electrical Conduit Adapter

015375592
62-0477-001: RNCC: 3 | RNVC: 2

13 Feb 2006

5975-01-535-0754
Electrical-Electronic Equipment Chassis

015350754
11440424: RNCC: 3 | RNVC: 2

14 Nov 2005

5975-01-541-5834
Electrical Equipment Mounting Base

015415834
RMT40-00-00: RNCC: 3 | RNVC: 9
RMT40-00-00: RNCC: 5 | RNVC: 9
RMT-40: RNCC: C | RNVC: 1

30 Jun 2006

5975-01-539-5145
Electrical-Electronic Equipment Panel

015395145
747-3046-010: RNCC: 3 | RNVC: 2

24 Apr 2006

5975-01-528-2224
Electrical Equipment Mounting Base

015282224
522-0801-018: RNCC: 3 | RNVC: 2

7 Mar 2005

5975-01-534-9408
Electrical Equipment Cabinet

015349408
083948-0004: RNCC: 3 | RNVC: 2

8 Nov 2005

5975-01-534-7580
Electrical-Electronic Equipment Chassis

015347580
BA36R-RA: RNCC: 3 | RNVC: 9
00-BA356-RA: RNCC: 5 | RNVC: 2

1 Nov 2005

5975-01-533-3968
Electronic Equipment Mounting Tray

015333968
047-04751-0004: RNCC: 3 | RNVC: 2

13 Sep 2005

5975-01-353-0345
Electrical Nonmetallic Conduit Assembly

013530345
5497312-39: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-357-3057
Flexible Metal Conduit

013573057
1567004-101: RNCC: 3 | RNVC: 2

21 Apr 1992

5975-01-343-9337
Electrical-Electronic Equipment Chassis

013439337
870655-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-696-7615
Electrical-Electronic Equipment Panel

016967615
2841B2040-3: RNCC: 3 | RNVC: 2

16 Aug 2021

5975-01-354-9208
Electrical Tie Down Mounting Base

013549208
ABMM: RNCC: 3 | RNVC: 2
802716-2: RNCC: 3 | RNVC: 2

7 Mar 1992

5975-01-357-9386
Electrical Box Connector

013579386
040-3304: RNCC: 3 | RNVC: 2

5 May 1992

5975-01-343-9124
Electrical Equipment Rack

013439124
256617-1: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-9334
Electrical-Electronic Equipment Chassis

013439334
719725-3: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-691-6212
Electrical-Electronic Equipment Chassis

016916212
77A586733G106: RNCC: 3 | RNVC: 2

20 Oct 2020

5975-01-686-0645
Electrical-Electronic Equipment Chassis

016860645
RFE23050110-501: RNCC: 3 | RNVC: 2
RFE23050110-501: RNCC: 3 | RNVC: 9

28 Jan 2020

5975-01-692-9785
Line Supporting Strap

016929785
SPC35323: RNCC: 3 | RNVC: 2
99253631: RNCC: 5 | RNVC: 2

21 Jan 2021

5975-01-693-5200
Interconnecting Box

016935200
11130953: RNCC: 3 | RNVC: 2
U-TNA-ELE-603-C: RNCC: 5 | RNVC: 2

18 Feb 2021

5975-01-692-8249
Electrical Equipment Rack

016928249
AT-MMCR18-00: RNCC: 3 | RNVC: 2

13 Jan 2021

5975-01-694-5926
Interconnecting Box

016945926
000-056-094: RNCC: 3 | RNVC: 2

12 Apr 2021

5975-01-688-0484
Raceway Cover

016880484
39920-40205-10: RNCC: 3 | RNVC: 2

30 Apr 2020

5975-01-689-3312
Electrical-Electronic Equipment Panel

016893312
20-101-30: RNCC: 3 | RNVC: 2

16 Jun 2020

5975-01-687-6467
Electrical Components Tie Down Strap

016876467
T50R6M4: RNCC: 3 | RNVC: 2

10 Apr 2020

5975-01-687-3202
Electrical Equipment Rack

016873202
65-PRS11-100: RNCC: 3 | RNVC: 2

27 Mar 2020

5975-01-689-1943
Electrical Equipment Mounting Base

016891943
540594: RNCC: 3 | RNVC: 2

9 Jun 2020

5975-01-690-9211
Mounting Plate

016909211
PA-1137MG: RNCC: 3 | RNVC: 2

10 Sep 2020

5975-01-690-3115
Electrical Cable Ground Guard

016903115
FL2X1.75-B: RNCC: 3 | RNVC: 9
06494976: RNCC: 5 | RNVC: 2

5 Aug 2020

5975-01-687-3532
Electrical Equipment Rack

016873532
52000029: RNCC: 3 | RNVC: 2
CAS-00014-INT: RNCC: 5 | RNVC: 2

30 Mar 2020

5975-01-692-6838
Electrical Equipment Mounting Base

016926838
D3495452-0501: RNCC: 3 | RNVC: 2

5 Jan 2021

5975-01-693-0943
Electrical Cable Protector

016930943
804018001: RNCC: 3 | RNVC: 2

26 Jan 2021

5975-01-693-3868
Electrical Cable Protector

016933868
161-44200: RNCC: 3 | RNVC: 2
SBPAV09: RNCC: 5 | RNVC: 2

9 Feb 2021

5975-01-694-7630
Electrical-Electronic Equipment Chassis

016947630
MB3060/M: RNCC: 3 | RNVC: 2

22 Apr 2021

5975-01-694-8588
Electrical Equipment Cabinet

016948588
E3SXR6: RNCC: 3 | RNVC: 2

29 Apr 2021

5975-01-695-1967
Interconnecting Box

016951967
1590R1FBK: RNCC: 3 | RNVC: 2

20 May 2021

5975-01-695-5680
Electrical-Electronic Equipment Chassis

016955680
9450241: RNCC: 3 | RNVC: 2
H490983-215: RNCC: 5 | RNVC: 9

12 Jun 2021

5975-01-695-8251
Strain Electrical Conductor Clamp

016958251
1958-F: RNCC: 3 | RNVC: 2

24 Jun 2021

5975-01-695-7226
Electrical-Electronic Equipment Panel

016957226
MCM1U: RNCC: 3 | RNVC: 2

22 Jun 2021

5975-01-685-2984
Electrical-Electronic Equipment Chassis

016852984
RFE23050280-501: RNCC: 3 | RNVC: 2
RFE23050280-501: RNCC: 3 | RNVC: 9

10 Dec 2019

5975-01-490-2018
Electrical-Electronic Equipment Chassis

014902018
233450-101: RNCC: 3 | RNVC: 2

21 Sep 2001

5975-01-682-0516
Electrical Equipment Rack

016820516
P9K37A: RNCC: 3 | RNVC: 2
P9K37A: RNCC: 5 | RNVC: 2

18 Jul 2019

5975-01-490-4862
Electrical-Electronic Equipment Chassis

014904862
114E6227G1: RNCC: 3 | RNVC: 2

27 Sep 2001

5975-01-491-2979
Electrical Equipment Rack

014912979
1215359-301: RNCC: 3 | RNVC: 2

17 Oct 2001

5975-01-491-2984
Electrical Equipment Rack

014912984
1215760-301: RNCC: 3 | RNVC: 2

17 Oct 2001

5975-01-490-7742
Electronic Equipment Mounting Tray

014907742
09-2757055-110: RNCC: 3 | RNVC: 2

5 Oct 2001

5975-01-681-8284
Electrical Equipment Shelf

016818284
01.102.041.1.001: RNCC: 3 | RNVC: 2

9 Jul 2019

5975-01-682-2356
Chassis Base

016822356
72D420301-1001: RNCC: 3 | RNVC: 2

29 Jul 2019

5975-01-684-2629
Electrical Components Tie Down Strap

016842629
SPC35192: RNCC: 3 | RNVC: 2

28 Oct 2019

5975-01-685-7075
Nonmetallic Raceway

016857075
T70TRIW: RNCC: 3 | RNVC: 2

9 Jan 2020

5975-01-685-7480
Nonmetallic Raceway

016857480
T70TRCIW: RNCC: 3 | RNVC: 2

10 Jan 2020

5975-01-682-2012
Electrical Components Tie Down Strap

016822012
304-7082: RNCC: 3 | RNVC: 2

26 Jul 2019

5975-01-489-5361
Cable Hanger

014895361
B-7050-8388: RNCC: 3 | RNVC: 2

17 Sep 2001

5975-01-483-9930
Cable Marker Sleeve

014839930
2540806-78: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-9945
Cable Marker Sleeve

014839945
2540806-83: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-484-0364
Electrical-Electronic Equipment Chassis

014840364
C-GRR: RNCC: 3 | RNVC: 2

16 Apr 2001

5975-01-487-1720
Blank Panel

014871720
068528: RNCC: 3 | RNVC: 2

26 Jul 2001

5975-01-488-0918
Rigid Metal Conduit

014880918
5HM40037-107: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-486-4938
Electrical-Electronic Equipment Chassis

014864938
10513-3000-01: RNCC: 3 | RNVC: 2

29 Jun 2001

5975-01-665-9939
Electrical-Electronic Equipment Chassis

016659939
101ASM6055: RNCC: 3 | RNVC: 2

21 Aug 2017

5975-01-666-1275
Electrical-Electronic Equipment Panel

016661275
5258803-686: RNCC: 3 | RNVC: 2
5258803-686: RNCC: 5 | RNVC: 2

24 Aug 2017

5975-01-485-6997
Junction Box

014856997
Z72-96-54-AL60: RNCC: 3 | RNVC: 2
GC533B71: RNCC: 7 | RNVC: 2

4 Jun 2001

5975-01-483-9924
Cable Marker Sleeve

014839924
2540806-72: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-666-1451
Conduit Outlet

016661451
GRUE50-A: RNCC: 3 | RNVC: 2

28 Aug 2017

5975-01-666-5871
Electrical-Electronic Equipment Chassis

016665871
39278-90034-11: RNCC: 1 | RNVC: 2
7MH-000-1241: RNCC: 3 | RNVC: 2

13 Sep 2017

5975-01-666-6668
Electrical Equipment Shelf

016666668
352E3401-101: RNCC: 3 | RNVC: 2

15 Sep 2017

5975-01-663-9506
Electrical Equipment Drawer

016639506
1117897: RNCC: 3 | RNVC: 2
04060726000001: RNCC: 5 | RNVC: 2
B10031225: RNCC: 5 | RNVC: 2

31 May 2017

5975-01-664-2681
Electrical Equipment Cabinet

016642681
15200: RNCC: 3 | RNVC: 2

13 Jun 2017

5975-01-664-2138
Electrical Conductor Bushing

016642138
E26030: RNCC: 3 | RNVC: 2

9 Jun 2017

5975-01-663-4305
Electrical-Electronic Equipment Panel

016634305
SR03-01MK2: RNCC: 3 | RNVC: 2

9 May 2017

5975-01-662-9202
Electrical-Electronic Equipment Chassis

016629202
UHK81536-1: RNCC: 3 | RNVC: 2

21 Apr 2017

5975-01-663-4360
Electrical Equipment Rack

016634360
ACS-4330-RM-19=: RNCC: 3 | RNVC: 2

10 May 2017

5975-01-661-3133
Electrical Components Tie Down Strap

016613133
LWC75-A-L20: RNCC: 3 | RNVC: 2

27 Feb 2017

5975-01-658-9871
Electrical Equipment Rack

016589871
279413-01: RNCC: 3 | RNVC: 2

28 Oct 2016

5975-01-659-4341
Mounting Plate

016594341
39278-40161-1: RNCC: 3 | RNVC: 2

28 Nov 2016

5975-01-660-0433
Electrical Conduit Union

016600433
419395-1: RNCC: 3 | RNVC: 2

3 Jan 2017

5975-01-661-4541
Interior Cable Rack

016614541
AR8715: RNCC: 3 | RNVC: 2

3 Mar 2017

5975-01-660-8889
Electrical-Electronic Equipment Chassis

016608889
39593-40606-3: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-663-4187
Blank Panel

016634187
CMBIG-XIG: RNCC: 3 | RNVC: 2
CMBIG-XIG: RNCC: 5 | RNVC: 9

9 May 2017

5975-01-663-4910
Mounting Plate

016634910
68629-43114-1: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-659-4762
Line Supporting Strap

016594762
601-504: RNCC: 3 | RNVC: 2

29 Nov 2016

5975-01-663-1307
Junction Box Cover

016631307
4010036: RNCC: 3 | RNVC: 2

27 Apr 2017

5975-01-580-6529
Blank Panel

015806529
A5543-00004: RNCC: 3 | RNVC: 2

22 Dec 2009

Load More Results