What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 198 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 198of 491

5975-01-696-4396
Electrical Equipment Shelf

016964396
1305AS0531-101: RNCC: 3 | RNVC: 2

27 Jul 2021

5975-01-696-7138
Electrical Equipment Shelf

016967138
1305MD2417-102: RNCC: 3 | RNVC: 2

12 Aug 2021

5975-01-578-8209
Junction Box

015788209
915406-4: RNCC: 3 | RNVC: 2

21 Oct 2009

5975-01-578-9050
Electrical Components Tie Down Strap

015789050
MS3368-1-4C: RNCC: 3 | RNVC: 2

23 Oct 2009

5975-01-579-9793
Electrical Equipment Cabinet

015799793
AE-D-2045: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-580-6557
Brace Lower

015806557
A5543-00005: RNCC: 3 | RNVC: 2

22 Dec 2009

5975-01-694-9144
Electronic Equipment Mounting Tray

016949144
RAM-234-3FL: RNCC: 3 | RNVC: 2
3301573: RNCC: 5 | RNVC: 2

4 May 2021

5975-01-475-9743
Electrical Equipment Rack

014759743
RMK19M: RNCC: 3 | RNVC: 9
BLA 0011: RNCC: 5 | RNVC: 9
BLA 0011: RNCC: 5 | RNVC: 9

20 Jun 2000

5975-01-476-0071
Junction Box

014760071
22-32140: RNCC: 3 | RNVC: 2

21 Jun 2000

5975-01-476-7615
Electrical Components Tie Down Strap

014767615
SST4S-C0: RNCC: 3 | RNVC: 2

21 Jul 2000

5975-01-476-8853
Cable Marker Sleeve

014768853
013-007382-063: RNCC: 3 | RNVC: 2

25 Jul 2000

5975-01-421-0199
Electrical-Electronic Equipment Chassis

014210199
SK70162: RNCC: 3 | RNVC: 9

30 Oct 1995

5975-01-420-7869
Cable Strain Relief Bushing

014207869
BE3A: RNCC: 3 | RNVC: 2

25 Oct 1995

5975-01-387-3333
Cable Marker Sleeve

013873333
58139-43030-2: RNCC: 3 | RNVC: 2

2 Mar 1994

5975-01-421-3389
Electrical-Electronic Equipment Chassis

014213389
7598827G1: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-676-1454
Electrical Cable Support

016761454
13211465: RNCC: 3 | RNVC: 2

15 Oct 2018

5975-01-678-2538
Junction Box

016782538
85001698: RNCC: 3 | RNVC: 2

29 Jan 2019

5975-01-683-4436
Blank Panel

016834436
PA-1131: RNCC: 3 | RNVC: 2

23 Sep 2019

5975-01-677-7148
Electrical Components Tie Down Strap

016777148
103673P: RNCC: 3 | RNVC: 2

2 Jan 2019

5975-01-677-2966
Electrical-Electronic Equipment Panel

016772966
UWA21755-2: RNCC: 3 | RNVC: 2

6 Dec 2018

5975-01-677-9574
Electrical Equipment Rack

016779574
9361-4PX: RNCC: 3 | RNVC: 2

15 Jan 2019

5975-01-682-4526
Electrical Components Tie Down Strap

016824526
304-7079: RNCC: 3 | RNVC: 2

8 Aug 2019

5975-01-683-2424
Electrical-Electronic Equipment Chassis

016832424
60000G06: RNCC: 3 | RNVC: 2

16 Sep 2019

5975-01-664-4287
Electrical-Electronic Equipment Chassis

016644287
639410-001: RNCC: 3 | RNVC: 2

20 Jun 2017

5975-01-660-8884
Electrical-Electronic Equipment Chassis

016608884
39593-40606-1: RNCC: 3 | RNVC: 2

8 Feb 2017

5975-01-653-4571
Electric Cylinder

016534571
MPAI-A4300RM34A: RNCC: 3 | RNVC: 2

24 Mar 2016

5975-01-653-5425
Electrical Wall Plate

016535425
WDRE15/10: RNCC: 3 | RNVC: 2

28 Mar 2016

5975-01-694-2041
Electronic Equipment Mounting Tray

016942041
352S0507-107: RNCC: 3 | RNVC: 2

23 Mar 2021

5975-01-152-3319
Rod Assy

011523319
SD-31417: RNCC: 3 | RNVC: 2

30 Apr 1983

5975-01-472-4181
Electrical-Electronic Equipment Panel

014724181
3350996-7: RNCC: 3 | RNVC: 2

2 Mar 2000

5975-01-504-9121
Electronic Equipment Mounting Tray

015049121
261415-1: RNCC: 3 | RNVC: 2

13 Feb 2003

5975-01-473-1835
Electrical-Electronic Equipment Panel

014731835
8520134-902: RNCC: 3 | RNVC: 2

29 Mar 2000

5975-01-506-1462
Stuffing Tube

015061462
10464AL: RNCC: 3 | RNVC: 2

24 Mar 2003

5975-01-506-2227
Electrical Equipment Mounting Base

015062227
8198216G2: RNCC: 3 | RNVC: 2

25 Mar 2003

5975-01-505-2446
Cable Shield Adapter

015052446
SEEPA-N-G-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-362-8659
Electrical Cable Protector

013628659
3309042-17: RNCC: 3 | RNVC: 2

18 Aug 1992

5975-01-366-3669
Blank Panel

013663669
DAA3295A304-035: RNCC: 3 | RNVC: 2

24 Oct 1992

5975-01-487-6351
Electrical Equipment Rack

014876351
5HK01501-105: RNCC: 3 | RNVC: 2

13 Aug 2001

5975-01-379-3696
Cable Terminal Chamber

013793696
WRSS120/500-48: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-379-2692
Electrical Conduit Adapter

013792692
13470-899-641: RNCC: 3 | RNVC: 2

30 Aug 1993

5975-01-354-1938
Electrical-Electronic Equipment Panel

013541938
VMIVME-REPEAT-S-485/32: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-01-354-3926
Cable Terminal Chamber

013543926
6898345: RNCC: 3 | RNVC: 2

27 Feb 1992

5975-01-672-5394
Electrical-Electronic Equipment Chassis

016725394
687-8648-003: RNCC: 3 | RNVC: 2

7 May 2018

5975-01-674-8194
Raceway Cover

016748194
EB3T14A099EA: RNCC: 3 | RNVC: 2
23228770: RNCC: 5 | RNVC: 2
7423228770: RNCC: 5 | RNVC: 2

13 Aug 2018

5975-01-675-6994
Electrical Conductor Bushing

016756994
794964: RNCC: 3 | RNVC: 2

21 Sep 2018

5975-01-631-3813
Electrical Cable Assembly Protector

016313813
D5142112000: RNCC: 3 | RNVC: 2

11 Sep 2014

5975-01-642-6113
Electrical Conduit Bushing

016426113
3260AS1256: RNCC: 3 | RNVC: 2

3 Mar 2015

5975-01-672-3364
Electrical-Electronic Equipment Chassis

016723364
651-0673-005: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-672-4119
Electrical-Electronic Equipment Chassis

016724119
651-0673-001: RNCC: 3 | RNVC: 2

1 May 2018

5975-01-498-4889
Electrical Tie Down Mounting Base

014984889
TM2S8-MO: RNCC: 3 | RNVC: 2

27 Jun 2002

5975-01-499-4040
Rigid Metal Conduit

014994040
5HM40133-111: RNCC: 3 | RNVC: 2

22 Jul 2002

5975-01-499-1907
Electrical Components Tie Down Strap

014991907
TY528MR: RNCC: 3 | RNVC: 2
P700482: RNCC: 5 | RNVC: 2

16 Jul 2002

5975-01-504-7210
Junction Box

015047210
M24368/2: RNCC: 3 | RNVC: 2

6 Feb 2003

5975-01-504-7747
Electrical-Electronic Equipment Chassis

015047747
103E4155G3: RNCC: 3 | RNVC: 2

7 Feb 2003

5975-01-505-4466
Chassis Base

015054466
150-034971-009: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-01-500-5724
Electrical Equipment Mounting Base

015005724
34084590-001: RNCC: 3 | RNVC: 2

30 Aug 2002

5975-01-483-9898
Cable Marker Sleeve

014839898
2540806-45: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-487-1318
Electrical Tie Down Mounting Base

014871318
14102657: RNCC: 3 | RNVC: 2

25 Jul 2001

5975-01-480-6754
Electrical Equipment Cabinet

014806754
380568-B21: RNCC: 3 | RNVC: 2

30 Nov 2000

5975-01-486-7925
Rigid Metal Conduit Assembly

014867925
3226006-3: RNCC: 3 | RNVC: 2

16 Jul 2001

5975-01-486-8964
Electrical-Electronic Equipment Chassis

014868964
502715: RNCC: 3 | RNVC: 2

18 Jul 2001

5975-01-265-8641
Electrical Conduit Adapter

012658641
A2107S39050B055: RNCC: 3 | RNVC: 2

18 Oct 1987

5975-01-351-6682
Junction Box Cover

013516682
M55119-5: RNCC: 3 | RNVC: 2
DAA3122P047-127: RNCC: 7 | RNVC: 2

14 Jan 1992

5975-01-352-5295
Cable Marker Sleeve

013525295
GENCOTE125C 3/16IN: RNCC: 3 | RNVC: 2

27 Jan 1992

5975-01-353-0342
Electrical Nonmetallic Conduit Assembly

013530342
5497312-59: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-01-351-9920
Electrical Equipment Cabinet

013519920
819608-1: RNCC: 3 | RNVC: 2

17 Jan 1992

5975-01-353-2886
Junction Box

013532886
1979725: RNCC: 3 | RNVC: 1
1979725: RNCC: 5 | RNVC: 2

8 Feb 1992

5975-01-571-2773
Electrical-Electronic Equipment Chassis

015712773
988-3597-001: RNCC: 3 | RNVC: 2

29 Jan 2009

5975-01-571-8507
Electrical Cable Protector

015718507
BB4X-300GM: RNCC: 3 | RNVC: 9
BB4X-300GM: RNCC: 5 | RNVC: 2
BB4X-300GM: RNCC: 5 | RNVC: 9

19 Feb 2009

5975-01-684-6963
Electrical Wall Plate

016846963
WP-1: RNCC: 3 | RNVC: 2

13 Nov 2019

5975-01-677-4856
Electrical-Electronic Equipment Chassis

016774856
CHAS-BP3-MX960-S: RNCC: 3 | RNVC: 2
CHAS-BP3-MX960-S: RNCC: 5 | RNVC: 2

17 Dec 2018

5975-01-677-0403
Electrical Equipment Cabinet

016770403
7029782-1920: RNCC: 3 | RNVC: 2

26 Nov 2018

5975-01-681-0736
Electrical-Electronic Equipment Panel

016810736
441-0056-101: RNCC: 3 | RNVC: 2

4 Jun 2019

5975-01-690-6193
Electrical Equipment Mounting Base

016906193
2588-A-171-001: RNCC: 3 | RNVC: 2

24 Aug 2020

5975-01-597-4765
Electrical Equipment Rack

015974765
7249675: RNCC: 3 | RNVC: 2

9 Jun 2011

5975-01-691-7774
Electrical Components Tie Down Strap

016917774
91931: RNCC: 3 | RNVC: 2
00058535: RNCC: 5 | RNVC: 2

28 Oct 2020

5975-01-682-7297
Insulator Pin

016827297
131C11029X: RNCC: 3 | RNVC: 2

21 Aug 2019

5975-01-677-8388
Electrical-Electronic Equipment Chassis

016778388
779215-B21: RNCC: 3 | RNVC: 2
779215-B21: RNCC: 5 | RNVC: 2

9 Jan 2019

5975-01-676-5180
Electrical Cable Support

016765180
13211480: RNCC: 3 | RNVC: 2

31 Oct 2018

5975-01-138-6130
Electrical Equipment Cabinet

011386130
K663230001: RNCC: 3 | RNVC: 2
CY445WLR1: RNCC: 5 | RNVC: 1

17 Sep 1982

5975-01-008-4902
Retainer Spring

010084902
3165125-00: RNCC: 3 | RNVC: 2

25 Aug 1975

5975-01-018-8891
Electrical Cable Support

010188891
7069732-00: RNCC: 3 | RNVC: 2

1 Apr 1976

5975-01-013-9743
Junction Box

010139743
989N: RNCC: 3 | RNVC: 9

12 Dec 1975

5975-01-034-7527
Electrical Components Tie Down Strap

010347527
TYB24M: RNCC: 3 | RNVC: 2
0140398K00: RNCC: 5 | RNVC: 2
TYB24M: RNCC: 5 | RNVC: 2
622-161: RNCC: 5 | RNVC: 2
7141940020: RNCC: 5 | RNVC: 9
TYB24M-0: RNCC: 5 | RNVC: 9
Z00.N7141940020: RNCC: 5 | RNVC: 9
TYB24M: RNCC: 5 | RNVC: 9

30 Jan 1977

5975-01-498-3259
Electrical-Electronic Equipment Chassis

014983259
988-9577-001: RNCC: 3 | RNVC: 2

21 Jun 2002

5975-01-498-6398
Electrical Box Assy

014986398
21180: RNCC: 3 | RNVC: 9
21180: RNCC: C | RNVC: 1

29 Jun 2002

5975-01-495-8422
Electrical-Electronic Equipment Chassis

014958422
546-6668-004: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-496-2816
Electrical-Electronic Equipment Chassis

014962816
635-8765-001: RNCC: 3 | RNVC: 2

9 Apr 2002

5975-01-497-1653
Electrical-Electronic Equipment Chassis

014971653
A5675A: RNCC: 3 | RNVC: 2

10 May 2002

5975-01-495-5888
Interconnecting Box

014955888
49520-2: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-01-309-2085
Electrical-Electronic Equipment Chassis

013092085
622-0040: RNCC: 3 | RNVC: 2

13 Oct 1989

5975-01-365-3584
Electrical Cable Nipple

013653584
TCFS-24-62C-020-100CH85: RNCC: 3 | RNVC: 2

6 Oct 1992

5975-01-563-3963
Circular Clamp

015633963
CD28151H: RNCC: 3 | RNVC: 2

9 May 2008

5975-01-563-4188
Electrical Bushing

015634188
RL111-12: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-1955
Electric Junction Box

015631955
53966: RNCC: 3 | RNVC: 2

5 May 2008

5975-01-129-4935
Strip Supp Center

011294935
202003: RNCC: 3 | RNVC: 2
202003: RNCC: 5 | RNVC: 9

7 Apr 1982

5975-01-129-9197
Limit Switch Cover

011299197
1092346: RNCC: 3 | RNVC: 2
1092346-1: RNCC: 5 | RNVC: 2

14 Apr 1982

5975-01-468-1319
Tray Mount

014681319
7-511171038-21: RNCC: 3 | RNVC: 2

29 Sep 1999

5975-01-468-9246
Flexible Metal Conduit Assembly

014689246
254708: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-472-7515
Electrical Wall Plate

014727515
62828-40131: RNCC: 3 | RNVC: 2
62828-40131-1: RNCC: 5 | RNVC: 2

15 Mar 2000

5975-01-467-8449
Electrical-Electronic Equipment Chassis

014678449
CCHA40351: RNCC: 3 | RNVC: 2

16 Sep 1999

5975-01-336-8017
Dead End Glas-Grip

013368017
KDE-1108: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-277-2699
Electrical Equipment Rack

012772699
85828-201-11: RNCC: 3 | RNVC: 1

20 Apr 1988

5975-01-359-3923
Electrical Conductor Bushing

013593923
PN527B452: RNCC: 3 | RNVC: 2

5 Jun 1992

5975-01-359-4016
Electrical-Electronic Equipment Panel

013594016
08-2060-01: RNCC: 3 | RNVC: 2

5 Jun 1992

5975-01-362-9086
Electrical Tie Down Mounting Base

013629086
TC-5355: RNCC: 3 | RNVC: 2

18 Aug 1992

5975-01-364-0000
Electrical-Electronic Equipment Chassis

013640000
408387-1: RNCC: 3 | RNVC: 2

11 Sep 1992

5975-01-535-9201
Flexible Metal Conduit

015359201
227667-DL0000: RNCC: 3 | RNVC: 2

14 Dec 2005

5975-01-573-4433
Electrical-Electronic Equipment Chassis

015734433
428-01856-001: RNCC: 3 | RNVC: 2

22 Apr 2009

5975-01-112-6062
Electrical Components Tie Down Strap

011126062
TYR8: RNCC: 3 | RNVC: 2
1028880P00: RNCC: 5 | RNVC: 2

7 May 1981

5975-01-466-4692
Electrical Grounding Plate

014664692
520391-1: RNCC: 3 | RNVC: 2

20 Jul 1999

5975-01-467-7043
Electrical Equipment Rack

014677043
J1466A: RNCC: 3 | RNVC: 2

10 Sep 1999

5975-01-467-9326
Electrical Equipment Mounting Base

014679326
902399-801: RNCC: 3 | RNVC: 2
902399-801-E2C: RNCC: 5 | RNVC: 9

21 Sep 1999

5975-01-468-3850
Electrical-Electronic Equipment Chassis

014683850
6255594G1: RNCC: 3 | RNVC: 2

7 Oct 1999

5975-01-332-0357
Junction Box Cover

013320357
3322213: RNCC: 3 | RNVC: 2

2 Jan 1991

5975-01-334-5268
Electrical Equipment Rack

013345268
067874: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-334-5340
Electrical Standardized Components Case

013345340
421098: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-357-0196
Electrical-Electronic Equipment Chassis

013570196
4-494059-02: RNCC: 3 | RNVC: 2

16 Apr 1992

5975-01-430-7030
Electrical Equipment Mounting Base

014307030
MP15003013902: RNCC: 3 | RNVC: 9
MP15003013902: RNCC: C | RNVC: 1

2 May 1996

5975-01-496-2380
Electrical-Electronic Equipment Chassis

014962380
548-5988-004: RNCC: 3 | RNVC: 2

8 Apr 2002

5975-01-103-6969
Cap

011036969
453693-01: RNCC: 3 | RNVC: 2
453693-01: RNCC: 3 | RNVC: 9

18 Nov 1980

5975-01-462-7684
Junction Kit

014627684
FGS-MJWR-C-10: RNCC: 3 | RNVC: 9

17 Feb 1999

5975-01-463-2881
Electrical Equipment Mounting Base

014632881
94149: RNCC: 3 | RNVC: 2

15 Mar 1999

5975-01-463-4669
Flexible Metal Conduit

014634669
9760-1: RNCC: 3 | RNVC: 2

24 Mar 1999

5975-01-463-5861
Fanning Strip

014635861
17P8E2011-501: RNCC: 3 | RNVC: 2

29 Mar 1999

5975-01-286-6855
Electrical Conduit Coupling

012866855
25436-63: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-204-0911
Junction Box

012040911
800079-2: RNCC: 3 | RNVC: 2

22 Mar 1985

5975-01-303-6761
Electrical Components Tie Down Strap

013036761
696-40527-3-4: RNCC: 3 | RNVC: 2
696-40527-3-4-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-496-7773
Cable Terminal Chamber

014967773
XAGA500-100/25-500: RNCC: 3 | RNVC: 2
XAGA500-100/25-500: RNCC: 5 | RNVC: 2

25 Apr 2002

5975-01-149-7377
Rigid Metal Conduit

011497377
35-8296-501: RNCC: 3 | RNVC: 2

25 Mar 1983

5975-01-148-4457
Junction Box

011484457
50001412: RNCC: 3 | RNVC: 9

5 Mar 1983

5975-01-459-6712
Interconnecting Box

014596712
DL MSE-ITT: RNCC: 3 | RNVC: 2
DL MSE-ITT: RNCC: 5 | RNVC: 9

9 Oct 1998

5975-01-459-5650
Electrical Equipment Cabinet

014595650
DS100-S1MM: RNCC: 3 | RNVC: 9

6 Oct 1998

5975-01-461-2793
Electrical Cable Nipple

014612793
9711-1: RNCC: 3 | RNVC: 2

7 Dec 1998

5975-01-461-2351
Flexible Metal Conduit Assembly

014612351
759-498-517: RNCC: 3 | RNVC: 2
230726-DL000: RNCC: 3 | RNVC: 2
17B2E2000-547: RNCC: 7 | RNVC: 2

9 Jul 2020

5975-01-461-5303
Electrical-Electronic Equipment Chassis

014615303
10535-2500-02: RNCC: 3 | RNVC: 2

16 Dec 1998

5975-01-461-2998
Flexible Metal Conduit

014612998
8212-14: RNCC: 3 | RNVC: 2

8 Dec 1998

5975-01-461-4332
Flexible Metal Conduit Assembly

014614332
227639-DL0000: RNCC: 3 | RNVC: 2

12 Dec 1998

5975-01-461-6808
Electrical Components Tie Down Strap

014616808
SST2S-C00: RNCC: 3 | RNVC: 2

23 Dec 1998

5975-01-461-4972
Blank Panel

014614972
11459406: RNCC: 3 | RNVC: 2

15 Dec 1998

5975-01-339-3725
Junction Box Assembly

013393725
6586-100-3: RNCC: 3 | RNVC: 9

22 May 1991

5975-01-341-1348
Electrical Equipment Mounting Base

013411348
12FS-8.2: RNCC: 3 | RNVC: 2

25 Jun 1991

5975-01-317-5557
Electrical Conductor Bushing

013175557
SM-D-852147: RNCC: 3 | RNVC: 2

1 Apr 1990

5975-01-425-7508
Electrical Components Tie Down Strap

014257508
PLT4H-X0: RNCC: 3 | RNVC: 2

27 Feb 1996

5975-01-456-1599
Interconnecting Module Panel

014561599
10677945: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-456-5507
Electrical Equipment Mounting Base

014565507
11444702-002: RNCC: 3 | RNVC: 2

17 Jun 1998

5975-01-458-0759
Electrical-Electronic Equipment Panel

014580759
7711-1410-11: RNCC: 3 | RNVC: 2

12 Aug 1998

5975-01-690-6062
Rigid Nonmetallic Conduit

016906062
F4X4LG6: RNCC: 3 | RNVC: 2

21 Aug 2020

5975-01-696-8876
Electrical Equipment Mounting Base

016968876
3367187-9: RNCC: 3 | RNVC: 2

23 Aug 2021

5975-01-690-9326
Mounting Plate

016909326
PA-1132MG: RNCC: 3 | RNVC: 2

10 Sep 2020

5975-01-690-7802
Junction Box

016907802
JG.IMPCT.GLXY.S10P: RNCC: 3 | RNVC: 2

1 Sep 2020

5975-01-335-6549
Electrical Equipment Rack

013356549
86421448-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-336-4353
Cable Collar

013364353
243 740: RNCC: 3 | RNVC: 2
243 740: RNCC: 5 | RNVC: 9

26 Mar 1991

5975-01-421-1126
Electrical Box Connector

014211126
604AS401-2: RNCC: 3 | RNVC: 2

1 Nov 1995

5975-01-421-3387
Blank Panel

014213387
7599048G1: RNCC: 3 | RNVC: 2

6 Nov 1995

5975-01-422-2901
Electronic Junction Rack

014222901
7596242G1: RNCC: 3 | RNVC: 2

28 Nov 1995

5975-01-422-9490
Electrical-Electronic Equipment Panel

014229490
5497098-19: RNCC: 3 | RNVC: 2

12 Dec 1995

5975-01-317-7337
Assy Electrical Rail

013177337
MRTB-16: RNCC: 3 | RNVC: 2

4 Apr 1990

5975-01-079-7084
Gear Rear Plate

010797084
761-0176-003: RNCC: 3 | RNVC: 2

11 Jul 1979

5975-01-455-5912
Electrical-Electronic Equipment Chassis

014555912
1166127-1: RNCC: 3 | RNVC: 9
1166127-1: RNCC: C | RNVC: 1

7 May 1998

5975-01-675-2393
Electrical Components Tie Down Strap

016752393
BT5LH-L0: RNCC: 3 | RNVC: 2

29 Aug 2018

5975-01-678-5502
Blank Panel

016785502
QFX5100-EM-BLNK: RNCC: 3 | RNVC: 2
QFX5100-EM-BLNK: RNCC: 5 | RNVC: 2

12 Feb 2019

5975-01-678-6064
Interconnecting Box

016786064
ALN234018: RNCC: 3 | RNVC: 2

14 Feb 2019

5975-01-679-6277
Electrical Conduit Bushing

016796277
BG806L: RNCC: 3 | RNVC: 2

3 Apr 2019

5975-01-684-1975
Electrical-Electronic Equipment Panel

016841975
PNL-M341: RNCC: 3 | RNVC: 2

25 Oct 2019

5975-01-686-7785
Electrical Equipment Rack

016867785
F2812: RNCC: 3 | RNVC: 2

4 Mar 2020

5975-01-393-8845
Blank Panel

013938845
34064464-001: RNCC: 3 | RNVC: 2

29 Jul 1994

5975-01-395-2673
Blank Panel

013952673
34068842-002: RNCC: 3 | RNVC: 2

25 Aug 1994

5975-01-397-4115
Flexible Metal Conduit

013974115
1310-0101-39: RNCC: 3 | RNVC: 2
1310-0101-39: RNCC: 5 | RNVC: 9

8 Oct 1994

5975-01-397-5167
Rigid Metal Conduit

013975167
1310-0101-5: RNCC: 3 | RNVC: 2
1310-0101-5: RNCC: 5 | RNVC: 9

13 Oct 1994

5975-01-508-1971
Electrical-Electronic Equipment Chassis

015081971
WS-C6513-2500AC: RNCC: 3 | RNVC: 2
6WS-C5507: RNCC: 5 | RNVC: 9

14 May 2003

5975-01-506-7073
Electrical Equipment Rack

015067073
5HK01401-109: RNCC: 3 | RNVC: 2

7 Apr 2003

5975-01-420-7240
Electrical Equipment Drawer

014207240
7N312: RNCC: 3 | RNVC: 1
7N312-1,2,3,4,5,6: RNCC: 5 | RNVC: 1

24 Oct 1995

5975-01-452-0739
Taxi Light Relay Cover Assembly

014520739
3352215-1: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-452-6655
Electrical Box Connector

014526655
306146: RNCC: 3 | RNVC: 2

3 Feb 1998

5975-01-484-2228
Resistor-Rela Plate

014842228
5546606: RNCC: 3 | RNVC: 2

23 Apr 2001

5975-01-484-3139
Electrical Equipment Rack

014843139
10284-0100-01: RNCC: 3 | RNVC: 2

25 Apr 2001

5975-01-485-8800
Cable Marker Sleeve

014858800
651807: RNCC: 3 | RNVC: 2

11 Jun 2001

5975-01-477-1014
Guide Rail

014771014
5261002-4: RNCC: 3 | RNVC: 2

31 Jul 2000

5975-01-579-6807
Electrical Equipment Mounting Base

015796807
930-0025-001: RNCC: 3 | RNVC: 2

19 Nov 2009

5975-01-672-6784
Guide Rail

016726784
995-7217-001: RNCC: 3 | RNVC: 2

11 May 2018

5975-01-619-3184
Cable Marker Sleeve

016193184
HT-SCE-1K-1-1/2-2.0-0: RNCC: 3 | RNVC: 2

24 May 2013

5975-01-586-5784
Electrical Equipment Mounting Base

015865784
PK2209-M: RNCC: 3 | RNVC: 2

6 Jul 2010

5975-01-502-1611
Electrical Equipment Mounting Base

015021611
010-10061-00: RNCC: 3 | RNVC: 2

28 Oct 2002

5975-01-618-3982
Junction Box Cover

016183982
C930-400-00: RNCC: 3 | RNVC: 2

23 Apr 2013

5975-01-498-5688
Rigid Metal Conduit

014985688
5HM34101-111: RNCC: 3 | RNVC: 2

29 Jun 2002

5975-01-501-4542
Electrical-Electronic Equipment Panel

015014542
46715-1: RNCC: 3 | RNVC: 2

2 Oct 2002

5975-01-501-5796
Electrical Equipment Mounting Base

015015796
11039-1650-01: RNCC: 3 | RNVC: 2

7 Oct 2002

5975-01-449-3309
Electrical-Electronic Equipment Chassis

014493309
572-00639-3: RNCC: 3 | RNVC: 2

26 Sep 1997

5975-01-448-4161
Cable Marker Sleeve

014484161
TMS-SCE 1/2-1.5-9: RNCC: 3 | RNVC: 9

28 Aug 1997

5975-01-448-0139
Electrical-Electronic Equipment Chassis

014480139
32-092242-01: RNCC: 3 | RNVC: 2
32-092242-01: RNCC: 5 | RNVC: 9

19 Aug 1997

5975-01-449-8069
Electrical Equipment Shelf

014498069
414E3002-65: RNCC: 3 | RNVC: 2

16 Oct 1997

5975-01-448-4087
Electrical Equipment Mounting Base

014484087
34084572-001: RNCC: 3 | RNVC: 2

28 Aug 1997

5975-01-450-2716
Electrical Equipment Mounting Base

014502716
622-8614-401: RNCC: 3 | RNVC: 2

31 Oct 1997

5975-01-448-4754
Electrical Conduit Coupling Nut Clamp

014484754
E636-5227: RNCC: 3 | RNVC: 2

29 Aug 1997

5975-01-648-8362
Junction Box Extension

016488362
284A3223-9: RNCC: 3 | RNVC: 2

8 Oct 2015

5975-01-648-7368
Electrical Equipment Shelf

016487368
284A3700-98: RNCC: 3 | RNVC: 2

5 Oct 2015

5975-01-590-0923
Electrical Equipment Mounting Base

015900923
M043011: RNCC: 3 | RNVC: 2
M043011: RNCC: 3 | RNVC: 9

17 Nov 2010

5975-01-614-4915
Electrical-Electronic Equipment Chassis

016144915
781162-01: RNCC: 3 | RNVC: 2

5 Dec 2012

5975-01-615-1017
Guide Rail

016151017
305-00-1001: RNCC: 3 | RNVC: 2

28 Dec 2012

5975-01-590-0287
Electrical Equipment Mounting Base

015900287
M113072-101: RNCC: 3 | RNVC: 2
M113072-101: RNCC: 3 | RNVC: 9

15 Nov 2010

5975-01-590-4585
Junction Box

015904585
UU756030: RNCC: 3 | RNVC: 2
UU756030: RNCC: 5 | RNVC: 2

6 Dec 2010

5975-01-445-0494
Flexible Metal Conduit

014450494
1310-0101-42: RNCC: 3 | RNVC: 2
1310-0101-42: RNCC: 5 | RNVC: 9
1310-0101-42: RNCC: C | RNVC: 1
1310-0101: RNCC: D | RNVC: 9

22 May 1997

5975-01-445-8914
Electrical-Electronic Equipment Panel

014458914
10092-1100: RNCC: 3 | RNVC: 2

16 Jun 1997

5975-01-446-5442
Electrical-Electronic Equipment Chassis

014465442
653-1221-001: RNCC: 3 | RNVC: 2

9 Jul 1997

5975-01-446-5441
Electrical-Electronic Equipment Chassis

014465441
653-1220-001: RNCC: 3 | RNVC: 2

9 Jul 1997

5975-01-446-3949
Electrical-Electronic Equipment Chassis

014463949
634-0359-001: RNCC: 3 | RNVC: 2

1 Jul 1997

5975-01-584-7857
Flexible Nonmetallic Conduit

015847857
57433-03: RNCC: 3 | RNVC: 2
40042591: RNCC: 5 | RNVC: 2

6 May 2010

5975-01-316-4318
Electrical-Electronic Equipment Panel

013164318
130377: RNCC: 3 | RNVC: 9
130377: RNCC: 5 | RNVC: 2

8 Mar 1990

5975-01-581-5024
Junction Box Assembly

015815024
914020-1: RNCC: 3 | RNVC: 2

20 Jan 2010

5975-01-563-7366
Flexible Nonmetallic Conduit

015637366
5651001903: RNCC: 3 | RNVC: 2
P07157: RNCC: 5 | RNVC: 2
5651001903: RNCC: 5 | RNVC: 2

20 May 2008

5975-01-594-8347
Conduit Outlet Cover

015948347
2527606: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-443-7262
Electrical-Electronic Equipment Chassis

014437262
RS/RE 0531: RNCC: 3 | RNVC: 9
RS/RE 0531: RNCC: C | RNVC: 1

16 Apr 1997

5975-01-443-3047
Blank Panel

014433047
40101A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-695-8241
Electrical-Electronic Equipment Chassis

016958241
014-0650-001: RNCC: 3 | RNVC: 2
013-6233-001: RNCC: 5 | RNVC: 9
H490983-201: RNCC: 5 | RNVC: 9

24 Jun 2021

5975-01-695-9853
Cable Hanger

016959853
3094883-1: RNCC: 3 | RNVC: 2

1 Jul 2021

5975-01-696-4999
Mounting Plate

016964999
OP-9400(4T): RNCC: 3 | RNVC: 2

30 Jul 2021

5975-01-696-5447
Electrical-Electronic Equipment Chassis

016965447
ASY-0528: RNCC: 3 | RNVC: 2

3 Aug 2021

5975-01-696-9219
Electrical-Electronic Equipment Panel

016969219
LS35301B02AY: RNCC: 3 | RNVC: 2

24 Aug 2021

5975-01-696-6536
Electrical Equipment Shelf

016966536
1305AS1332-129: RNCC: 3 | RNVC: 2

9 Aug 2021

5975-01-578-5478
Junction Box Cover

015785478
913833-3: RNCC: 3 | RNVC: 2

9 Oct 2009

5975-01-582-1505
Electronic Equipment Mounting Tray

015821505
802C0604-02: RNCC: 3 | RNVC: 2

9 Feb 2010

5975-01-237-1965
Memo Back Panel Asy

012371965
57977-40070-3: RNCC: 3 | RNVC: 2

26 Jul 1986

5975-01-599-2408
Electrical Components Tie Down Strap

015992408
136-0207: RNCC: 3 | RNVC: 2
136-0207: RNCC: 5 | RNVC: 9

19 Sep 2011

5975-01-599-8415
Electrical-Electronic Equipment Chassis

015998415
WD1539: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-01-601-2685
Rigid Metal Conduit Assembly

016012685
910378: RNCC: 3 | RNVC: 2

18 Jan 2012

5975-01-601-6657
Insulating Kit

016016657
MK3306: RNCC: 3 | RNVC: 2
TO-220: RNCC: 5 | RNVC: 2

19 Jan 2012

5975-01-440-6384
Electrical Equipment Rack

014406384
5498161-5: RNCC: 3 | RNVC: 2

21 Jan 1997

5975-01-690-7281
Electrical-Electronic Equipment Chassis

016907281
SC417E16-R1400UB: RNCC: 3 | RNVC: 2

28 Aug 2020

5975-01-690-9028
Line Supporting Strap

016909028
K10053853-510: RNCC: 3 | RNVC: 2

9 Sep 2020

5975-01-691-2957
Electrical Box Connector

016912957
347A360-1: RNCC: 3 | RNVC: 2
347A360-1: RNCC: 5 | RNVC: 9

1 Oct 2020

5975-01-692-7616
Electrical Equipment Mounting Base

016927616
K12075: RNCC: 3 | RNVC: 2

11 Jan 2021

5975-01-694-5871
Electrical Equipment Mounting Base

016945871
FORAX-RM-2U-R6L: RNCC: 3 | RNVC: 2

12 Apr 2021

5975-01-695-8096
Electrical Equipment Cabinet

016958096
030843-0002: RNCC: 3 | RNVC: 2
502082: RNCC: D | RNVC: 9

24 Jun 2021

5975-01-690-7627
Electrical-Electronic Equipment Chassis

016907627
0F378K: RNCC: 3 | RNVC: 2

31 Aug 2020

5975-01-690-7904
Electrical Equipment Mounting Base

016907904
543637: RNCC: 3 | RNVC: 2

1 Sep 2020

5975-01-692-5364
Electrical-Electronic Equipment Chassis

016925364
4845-4500-002: RNCC: 3 | RNVC: 2
4845-4500-002: RNCC: 5 | RNVC: 2

21 Dec 2020

5975-01-696-0416
Mounting Plate

016960416
010184.914: RNCC: 3 | RNVC: 2

7 Jul 2021

5975-01-236-5643
Blank Panel

012365643
802429D2: RNCC: 3 | RNVC: 2
802429D2: RNCC: 3 | RNVC: 9

18 Jul 1986

5975-01-611-4647
Electrical-Electronic Equipment Panel

016114647
102060-001: RNCC: 3 | RNVC: 2

14 Sep 2012

5975-01-608-5907
Electronic Equipment Mounting Tray

016085907
8239544G2: RNCC: 3 | RNVC: 2
3580B: RNCC: 5 | RNVC: 2

3 Jul 2012

5975-00-127-4306
Interconnecting Box Cover

001274306
0N080313: RNCC: 3 | RNVC: 2

2 Dec 1968

5975-01-439-1228
Rigid Nonmetallic Conduit

014391228
38544-2: RNCC: 3 | RNVC: 2
38544-2: RNCC: 5 | RNVC: 9

27 Nov 1996

5975-01-690-4284
Rigid Nonmetallic Conduit

016904284
55802: RNCC: 3 | RNVC: 2

12 Aug 2020

5975-01-689-3904
Electrical Equipment Rack

016893904
P9K48A: RNCC: 3 | RNVC: 2

18 Jun 2020

5975-01-249-9846
Mounting

012499846
2180896-2: RNCC: 3 | RNVC: 2
2180896-2: RNCC: 5 | RNVC: 9

21 Feb 1987

5975-01-607-3914
Electronic Equipment Mounting Tray

016073914
MT4-2332-102: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-438-5374
Electrical Components Tie Down Strap

014385374
PLT2M0: RNCC: 3 | RNVC: 2

12 Nov 1996

5975-01-599-0539
Electrical-Electronic Equipment Chassis

015990539
DS14MK2-AT: RNCC: 3 | RNVC: 2

12 Sep 2011

5975-01-598-2969
Electrical Conduit Coupling Nut Clamp

015982969
1549398: RNCC: 3 | RNVC: 2

19 Jul 2011

5975-01-599-7856
Electronic Equipment Mounting Tray

015997856
M073006: RNCC: 3 | RNVC: 2
M073006: RNCC: 3 | RNVC: 9

21 Oct 2011

5975-01-689-2414
Electrical-Electronic Equipment Chassis

016892414
40010180-003: RNCC: 3 | RNVC: 2

10 Jun 2020

5975-01-689-1257
Electrical Components Tie Down Strap

016891257
TY25M-10: RNCC: 3 | RNVC: 2
7TAG009270R0052: RNCC: 5 | RNVC: 2

5 Jun 2020

5975-01-689-3461
Electrical Equipment Cabinet

016893461
1000437635: RNCC: 3 | RNVC: 2

16 Jun 2020

5975-01-415-9743
Terminal Board

014159743
9D0090-46P: RNCC: 3 | RNVC: 2
RC11090-46P: RNCC: 5 | RNVC: 2
9D0090: RNCC: D | RNVC: 9

11 Jul 1995

5975-01-235-4738
Boot Az Actuator

012354738
555-012-103: RNCC: 3 | RNVC: 2
555-012-103: RNCC: 5 | RNVC: 9

30 Jun 1986

5975-01-587-5585
Electrical Equipment Rack

015875585
RMK253A: RNCC: 3 | RNVC: 2

11 Aug 2010

5975-01-604-9430
Electrical Equipment Mounting Base

016049430
653-9078-101: RNCC: 3 | RNVC: 2
653-9078-101: RNCC: 5 | RNVC: 2

13 Apr 2012

5975-01-606-0005
Electrical-Electronic Equipment Chassis

016060005
C99A9414-23: RNCC: 3 | RNVC: 2

2 May 2012

5975-01-550-8670
Computer Peripheral Conversion Kit

015508670
770-10351: RNCC: 3 | RNVC: 2

1 May 2007

5975-01-552-5944
Rigid Metal Conduit

015525944
CONDUIT,GALVANIZED,4.0 IN.,20 FT: RNCC: 3 | RNVC: 2

19 Jun 2007

5975-01-552-9348
Flexible Nonmetallic Conduit

015529348
796AX2PK25: RNCC: 1 | RNVC: 2
M3504004: RNCC: 3 | RNVC: 2
796AX2PK25: RNCC: 5 | RNVC: 2
68137-R: RNCC: 5 | RNVC: 9

28 Jun 2007

5975-01-553-2795
Electrical-Electronic Equipment Chassis

015532795
530818-100: RNCC: 3 | RNVC: 2

11 Jul 2007

5975-01-553-6500
Electrical-Electronic Equipment Chassis

015536500
ACP-2000MB-30Z: RNCC: 3 | RNVC: 2

20 Jul 2007

5975-01-555-7589
Electrical Equipment Rack

015557589
KF-21-IPF-B: RNCC: 3 | RNVC: 2

12 Sep 2007

5975-01-558-1933
Electrical Conduit Adapter

015581933
RP2311-26-16-01: RNCC: 3 | RNVC: 1
302-7006849ITEM49: RNCC: 5 | RNVC: 1
RP2311-26-16-01: RNCC: 5 | RNVC: 1

2 Nov 2007

5975-01-661-3416
Electrical-Electronic Equipment Chassis

016613416
RM42300-F2: RNCC: 3 | RNVC: 2

28 Feb 2017

5975-01-661-3345
Electronic Equipment Mounting Tray

016613345
700-00187-001: RNCC: 3 | RNVC: 2

28 Feb 2017

5975-01-588-3945
Electrical-Electronic Equipment Panel

015883945
HM022-123-111: RNCC: 3 | RNVC: 2

15 Sep 2010

5975-01-590-0291
Electrical Equipment Mounting Base

015900291
M103017: RNCC: 3 | RNVC: 2
M103017: RNCC: 3 | RNVC: 9

15 Nov 2010

5975-01-592-1597
Electrical Components Tie Down Strap

015921597
001-080019R00: RNCC: 3 | RNVC: 2

23 Feb 2011

5975-01-411-5373
Electrical Equipment Mounting Base

014115373
11438934: RNCC: 3 | RNVC: 2

27 Mar 1995

5975-01-414-7706
Cable Strain Relief Bushing

014147706
CE394-2M1: RNCC: 3 | RNVC: 2

14 Jun 1995

5975-01-582-7183
Electrical Equipment Rack

015827183
5062-7345: RNCC: 3 | RNVC: 2
5062-7345: RNCC: 3 | RNVC: 9

3 Mar 2010

5975-00-123-1527
Dust Cover

001231527
SCD647202-1: RNCC: 3 | RNVC: 2
1127001: RNCC: 5 | RNVC: 1
5975001231527: RNCC: 6 | RNVC: 9

1 Nov 1968

5975-01-600-0630
Electrical Box Adapter Flange

016000630
8939432-0003: RNCC: 3 | RNVC: 2

5 Nov 2011

5975-01-548-4923
Cable Marker Sleeve

015484923
5495505-002: RNCC: 3 | RNVC: 2

23 Feb 2007

5975-01-547-6853
Electrical Equipment Rack

015476853
379005-001: RNCC: 3 | RNVC: 2

29 Jan 2007

5975-01-658-6203
Electronic Equipment Mounting Tray

016586203
7-513200016-101: RNCC: 3 | RNVC: 2

6 Oct 2016

5975-01-658-9631
Electrical Equipment Rack

016589631
280332-02: RNCC: 3 | RNVC: 2

27 Oct 2016

5975-01-658-9025
Cable Collar

016589025
05-9988835: RNCC: 3 | RNVC: 2

25 Oct 2016

5975-01-659-6847
Electrical Conduit Adapter

016596847
W931-CB-150: RNCC: 3 | RNVC: 2

9 Dec 2016

5975-01-659-8953
Electrical Wall Plate

016598953
1711797-1: RNCC: 3 | RNVC: 9

21 Dec 2016

5975-01-659-8647
Electrical Wall Plate

016598647
1711653-1: RNCC: 3 | RNVC: 9

20 Dec 2016

5975-01-660-3296
Electrical Equipment Rack

016603296
ACXMODH21R: RNCC: 3 | RNVC: 2

18 Jan 2017

5975-01-628-5796
Electrical Equipment Mounting Base

016285796
10299-0580-01: RNCC: 3 | RNVC: 2
10299-0580-01: RNCC: 5 | RNVC: 2

2 Jun 2014

5975-01-552-5943
Rigid Metal Conduit

015525943
CONDUIT,GALVANIZED,2.5 IN.,20 FT: RNCC: 3 | RNVC: 2

19 Jun 2007

5975-00-167-9574
Electronic Equipment Mounting Tray

001679574
107996: RNCC: 3 | RNVC: 9
107996: RNCC: C | RNVC: 1

12 Jun 1968

5975-01-599-7853
Electronic Equipment Mounting Tray

015997853
M073005: RNCC: 3 | RNVC: 2
M073005: RNCC: 3 | RNVC: 9

21 Oct 2011

5975-01-596-7829
Electrical Equipment Rack

015967829
60071667-000: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-617-1988
Electrical Equipment Rack

016171988
BW904A: RNCC: 3 | RNVC: 2

14 Mar 2013

5975-01-657-1245
Blank Panel

016571245
N20-CBLKB1=: RNCC: 3 | RNVC: 2

29 Jul 2016

5975-01-657-1236
Blank Panel

016571236
N55-M-BLNK: RNCC: 3 | RNVC: 2

29 Jul 2016

5975-01-657-1244
Blank Panel

016571244
UCSB-LSTOR-BK=: RNCC: 3 | RNVC: 2

29 Jul 2016

5975-01-673-7280
Electrical Equipment Mounting Base

016737280
200-93111-101: RNCC: 3 | RNVC: 2

25 Jun 2018

5975-01-673-5445
Electrical Tie Down Mounting Base

016735445
7566K55: RNCC: 3 | RNVC: 2

18 Jun 2018

5975-01-590-0296
Electrical Equipment Mounting Base

015900296
R104911: RNCC: 3 | RNVC: 2
R104911: RNCC: 3 | RNVC: 9

15 Nov 2010

5975-01-590-1702
Electrical Equipment Mounting Base

015901702
M025038-001: RNCC: 3 | RNVC: 2
M025038-001: RNCC: 3 | RNVC: 9

22 Nov 2010

5975-01-590-6201
Electrical Equipment Drawer

015906201
40008887+003: RNCC: 3 | RNVC: 2

13 Dec 2010

5975-01-621-2197
Wire Strand Hanger

016212197
C26602: RNCC: 3 | RNVC: 2

28 Aug 2013

5975-01-624-7229
Electrical-Electronic Equipment Chassis

016247229
8526220-901: RNCC: 3 | RNVC: 2
8526220-920: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-624-4611
Electrical-Electronic Equipment Chassis

016244611
0170-1000-01W: RNCC: 3 | RNVC: 2

3 Jan 2014

5975-01-625-2671
Mounting Plate

016252671
68A870386-1007: RNCC: 3 | RNVC: 2

29 Jan 2014

5975-01-628-0382
Electrical Equipment Shelf

016280382
390393: RNCC: 3 | RNVC: 2
760103150: RNCC: 5 | RNVC: 2
360G2-1U-MOD-FX: RNCC: 5 | RNVC: 2
390393: RNCC: 5 | RNVC: 2

7 May 2014

5975-01-627-4139
Electrical Equipment Mounting Base

016274139
17A194: RNCC: 3 | RNVC: 2

14 Apr 2014

5975-01-594-8344
Conduit Outlet Cover

015948344
2527510: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-596-2950
Blank Panel

015962950
401855-03: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-609-1482
Electrical Box Connector

016091482
CONN207: RNCC: 3 | RNVC: 2

18 Jul 2012

5975-01-674-5497
Electrical-Electronic Equipment Chassis

016745497
IPC-602P4-30ZBE: RNCC: 3 | RNVC: 2

1 Aug 2018

5975-01-674-7457
Raceway Cover

016747457
EB3T14A099CA: RNCC: 3 | RNVC: 2
7423228762: RNCC: 5 | RNVC: 2
23228762: RNCC: 5 | RNVC: 2

9 Aug 2018

5975-01-659-8336
Electrical Equipment Drawer

016598336
1-1671365-1: RNCC: 3 | RNVC: 9

19 Dec 2016

5975-01-590-6793
Electronic Equipment Mounting Tray

015906793
40011252+000: RNCC: 3 | RNVC: 2

15 Dec 2010

5975-01-596-2943
Spec Wall Plug

015962943
470003: RNCC: 3 | RNVC: 2

13 May 2011

5975-01-673-9300
Electrical Equipment Cabinet

016739300
S8522B: RNCC: 3 | RNVC: 2

5 Jul 2018

5975-01-674-6428
Electrical Standardized Components Case

016746428
SUPER-V-9U: RNCC: 3 | RNVC: 2

6 Aug 2018

5975-01-618-5128
Junction Box Assembly

016185128
352E3521-1: RNCC: 3 | RNVC: 2

26 Apr 2013

5975-01-644-5493
Mounting Plate

016445493
38076: RNCC: 3 | RNVC: 2

11 May 2015

5975-01-645-9261
Electrical-Electronic Equipment Chassis

016459261
1199105: RNCC: 3 | RNVC: 2

6 Jul 2015

5975-01-591-7676
Electrical Equipment Rack

015917676
5230341-100: RNCC: 3 | RNVC: 2

9 Feb 2011

5975-01-593-5174
Junction Box

015935174
500613-COUG: RNCC: 3 | RNVC: 2
52866-440: RNCC: 5 | RNVC: 2

8 Apr 2011

5975-01-590-1696
Electrical Equipment Mounting Base

015901696
M113073-101: RNCC: 3 | RNVC: 2
M113073-101: RNCC: 3 | RNVC: 9

22 Nov 2010

5975-01-590-3984
Junction Box Assembly

015903984
100-011533-G001: RNCC: 3 | RNVC: 2

3 Dec 2010

5975-01-620-1326
Shielding Wedge Kit

016201326
103400: RNCC: 3 | RNVC: 2

3 Jul 2013

5975-01-641-4477
Cable Run

016414477
S31-04522: RNCC: 3 | RNVC: 2

22 Jan 2015

5975-01-614-4873
Electrical Tie Down Mounting Base

016144873
CB3019-AA-3V: RNCC: 3 | RNVC: 2
7108354: RNCC: 5 | RNVC: 2

5 Dec 2012

5975-01-616-8923
Electrical Equipment Cabinet

016168923
572020: RNCC: 3 | RNVC: 2

4 Mar 2013

5975-01-641-9201
Enclosure

016419201
A00003-01: RNCC: 3 | RNVC: 2
244029: RNCC: 5 | RNVC: 2
40087301: RNCC: 5 | RNVC: 2

6 Feb 2015

5975-01-484-0587
Electrical Components Tie Down Strap

014840587
10921769: RNCC: 3 | RNVC: 2

17 Apr 2001

5975-14-484-3666
Electrical Equipment Drawer

144843666
8184795: RNCC: 3 | RNVC: 2

14 Nov 1996

5975-01-670-2093
Electronic Equipment Mounting Tray

016702093
6298-101: RNCC: 3 | RNVC: 2

12 Feb 2018

5975-01-670-8965
Electrical Equipment Mounting Base

016708965
822-1210-002: RNCC: 3 | RNVC: 2

12 Mar 2018

5975-01-633-1630
Electrical Equipment Rack

016331630
CB39204-001: RNCC: 3 | RNVC: 2
40082128: RNCC: 5 | RNVC: 2

12 Nov 2014

5975-01-632-9018
Cable Splice Block

016329018
SBA10683: RNCC: 3 | RNVC: 2
15487314: RNCC: 5 | RNVC: 2

3 Nov 2014

5975-01-203-0017
Stuffing Tube

012030017
G2331A16S: RNCC: 3 | RNVC: 2

9 Mar 1985

5975-01-205-0015
Stuffing Tube

012050015
27064-019: RNCC: 3 | RNVC: 2

4 Apr 1985

5975-00-636-4380
Conduit Outlet

006364380
FSS222: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-208-6748
Conduit Outlet

002086748
LL39: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-01-587-9071
Electrical Equipment Rack

015879071
278541-4: RNCC: 3 | RNVC: 2

25 Aug 2010

5975-01-588-8692
Electrical Equipment Cabinet

015888692
508664-B21: RNCC: 3 | RNVC: 2
508664-B21: RNCC: 5 | RNVC: 2

7 Oct 2010

5975-01-508-3616
Guide Rail

015083616
910138-9: RNCC: 3 | RNVC: 2

19 May 2003

5975-01-626-4172
Electrical-Electronic Equipment Panel

016264172
734-65217-1: RNCC: 3 | RNVC: 2
734-65217: RNCC: D | RNVC: 9

10 Mar 2014

5975-01-629-1333
Mounting Plate

016291333
281477-01: RNCC: 3 | RNVC: 2

19 Jun 2014

5975-01-628-5887
Electrical-Electronic Equipment Chassis

016285887
7606S: RNCC: 3 | RNVC: 2

2 Jun 2014

5975-01-628-1134
Electrical Cable Support

016281134
HLO1290B: RNCC: 3 | RNVC: 2

9 May 2014

5975-01-628-9762
Electrical Components Tie Down Strap

016289762
SG200S-C: RNCC: 3 | RNVC: 2

16 Jun 2014

5975-01-631-1464
Electrical Cable Support

016311464
4002900-1: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-01-626-3113
Electrical-Electronic Equipment Chassis

016263113
K100532311: RNCC: 3 | RNVC: 2

5 Mar 2014

5975-01-666-6691
Electronic Junction Rack

016666691
011-00676-03: RNCC: 3 | RNVC: 2

15 Sep 2017

5975-01-667-1065
Electrical Conduit Ferrule

016671065
9362-B: RNCC: 3 | RNVC: 2
LC-20-B: RNCC: 5 | RNVC: 2
9362-B: RNCC: 5 | RNVC: 9

4 Oct 2017

5975-01-667-9550
Electrical Conduit Adapter

016679550
TI2000-295: RNCC: 3 | RNVC: 2

6 Nov 2017

5975-01-668-2106
Junction Box

016682106
352E2342-3: RNCC: 3 | RNVC: 2
352EK254-1: RNCC: 5 | RNVC: 2

14 Nov 2017

5975-01-669-5888
Electrical Equipment Rack

016695888
XMF4236-S0001: RNCC: 3 | RNVC: 2

12 Jan 2018

5975-01-345-6894
Stuffing Tube

013456894
3222B: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-381-2401
Stuffing Tube

013812401
50075-2: RNCC: 3 | RNVC: 2

12 Oct 1993

5975-01-346-6626
Insulator Bracket

013466626
A3042132: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-01-571-4171
Electrical Equipment Mounting Base

015714171
NC1010TF4: RNCC: 3 | RNVC: 2

3 Feb 2009

5975-01-526-9885
Electrical-Electronic Equipment Chassis

015269885
17G551551-3: RNCC: 3 | RNVC: 2

13 Jan 2005

5975-01-528-3939
Blank Panel

015283939
6482326V02: RNCC: 3 | RNVC: 2

11 Mar 2005

5975-01-507-4584
Electrical-Electronic Equipment Panel

015074584
DF055512-1: RNCC: 3 | RNVC: 9

29 Apr 2003

5975-01-623-3364
Electrical Tie Down Mounting Base

016233364
CB3019AA5N750: RNCC: 3 | RNVC: 2

8 Nov 2013

5975-01-624-8035
Cable Collar

016248035
232A1402-4: RNCC: 3 | RNVC: 2

15 Jan 2014

5975-01-624-6950
Blank Panel

016246950
MP-2100M-BP-IO/1: RNCC: 3 | RNVC: 2

13 Jan 2014

5975-01-663-5116
Electrical-Electronic Equipment Panel

016635116
541122694-1: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-663-1800
Electrical-Electronic Equipment Panel

016631800
CAE006574: RNCC: 3 | RNVC: 2

28 Apr 2017

5975-01-664-7098
Electrical-Electronic Equipment Chassis

016647098
RSA306BRACK: RNCC: 3 | RNVC: 2

30 Jun 2017

5975-01-664-7084
Electrical Equipment Rack

016647084
1017-00030-01: RNCC: 3 | RNVC: 2
1017-0006-01: RNCC: 5 | RNVC: 9

30 Jun 2017

5975-01-664-5200
Electrical Equipment Mounting Base

016645200
9010-35005-01: RNCC: 3 | RNVC: 2

22 Jun 2017

5975-01-663-0587
Electrical Equipment Mounting Base

016630587
7450220: RNCC: 3 | RNVC: 2
7450220: RNCC: 5 | RNVC: 2

25 Apr 2017

5975-01-663-8308
Flexible Metal Conduit Assembly

016638308
311.012.1: RNCC: 3 | RNVC: 2

24 May 2017

5975-01-666-5876
Electrical-Electronic Equipment Chassis

016665876
39278-90034-8: RNCC: 1 | RNVC: 2
7SA-000-0296: RNCC: 3 | RNVC: 2

13 Sep 2017

5975-01-665-6525
Nonmetallic Raceway

016656525
C51: RNCC: 3 | RNVC: 2

8 Aug 2017

5975-01-666-4335
Electrical-Electronic Equipment Chassis

016664335
1020076-06: RNCC: 3 | RNVC: 2
1020076-06: RNCC: 5 | RNVC: 2

7 Sep 2017

5975-01-144-8134
Conduit Outlet

011448134
E985H: RNCC: 3 | RNVC: 9

30 Dec 1982

5975-01-429-7576
Junction Box

014297576
108150051: RNCC: 3 | RNVC: 2

18 Apr 1996

5975-01-527-2105
Electrical-Electronic Equipment Chassis

015272105
DS1412B06: RNCC: 3 | RNVC: 2

24 Jan 2005

5975-01-527-9037
Ground Rod

015279037
2104706: RNCC: 3 | RNVC: 2
ES165X: RNCC: 5 | RNVC: 2
ES165X: RNCC: 5 | RNVC: 2
ES165X: RNCC: 5 | RNVC: 2

23 Feb 2005

5975-01-527-2068
Flexible Nonmetallic Conduit

015272068
287N6202-17: RNCC: 3 | RNVC: 2

24 Jan 2005

5975-01-569-4954
Electrical Bushing

015694954
RW309-11: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-564-8632
Cable Spacer

015648632
717-269: RNCC: 3 | RNVC: 2

30 Jun 2008

5975-01-561-4313
Flexible Nonmetallic Conduit

015614313
32-828547753: RNCC: 3 | RNVC: 2
32-828547753: RNCC: 5 | RNVC: 2

5 Mar 2008

5975-01-573-1779
Electronic Equipment Mounting Tray

015731779
95578-2: RNCC: 3 | RNVC: 2

10 Apr 2009

5975-01-573-8583
Electrical Equipment Rack

015738583
RX2075-2: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-5544
Electrical Equipment Mounting Base

015735544
16E1039-83: RNCC: 3 | RNVC: 2

28 Apr 2009

5975-01-573-8579
Electrical Equipment Rack

015738579
RX1650-501: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-8591
Electrical Equipment Rack

015738591
RX1952-100: RNCC: 3 | RNVC: 2

6 May 2009

5975-01-573-0346
Electrical-Electronic Equipment Chassis

015730346
ACP-4000MB-30Z: RNCC: 3 | RNVC: 2

3 Apr 2009

5975-01-661-3984
Insulator Bracket

016613984
111-0349: RNCC: 3 | RNVC: 2

1 Mar 2017

5975-01-659-9138
Electronic Junction Rack

016599138
AT-RKMT-SL01: RNCC: 3 | RNVC: 2
AT-RKMT-SL01: RNCC: 5 | RNVC: 2

22 Dec 2016

5975-01-660-7457
Electrical-Electronic Equipment Chassis

016607457
N3K-C3064-ACC-KIT: RNCC: 3 | RNVC: 2

1 Feb 2017

5975-01-660-9486
Electrical-Electronic Equipment Chassis

016609486
ACP 2000P4-30Z: RNCC: 3 | RNVC: 2

9 Feb 2017

5975-01-661-4038
Electrical-Electronic Equipment Chassis

016614038
7024404-1913: RNCC: 3 | RNVC: 2

1 Mar 2017

5975-01-408-4551
Conduit Outlet

014084551
EMA0325-425-243: RNCC: 3 | RNVC: 2

16 Feb 1995

5975-01-450-2265
Stuffing Tube

014502265
10076-01: RNCC: 3 | RNVC: 2

30 Oct 1997

5975-01-657-9028
Electrical Tie Down Mounting Base

016579028
TM1-X2-C: RNCC: 3 | RNVC: 2

2 Sep 2016

5975-01-530-3318
Electrical Equipment Drawer

015303318
098206-0100: RNCC: 3 | RNVC: 2

23 May 2005

5975-00-178-0576
Stuffing Tube

001780576
9S5010LALT17TYPE21SIZEK: RNCC: 3 | RNVC: 2
17T10196: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-525-4566
Electrical Equipment Drawer

015254566
11470127: RNCC: 3 | RNVC: 2

9 Nov 2004

5975-01-525-3712
Electrical Components Tie Down Strap

015253712
TY100-18X-100MC: RNCC: 3 | RNVC: 2

4 Nov 2004

5975-01-525-5398
Electrical Equipment Cabinet

015255398
DS30142F: RNCC: 3 | RNVC: 2

15 Nov 2004

5975-01-526-8910
Electrical Equipment Mounting Base

015268910
404A-38-S-1/DPX2/C-0: RNCC: 3 | RNVC: 2

11 Jan 2005

5975-01-526-8909
Electrical Equipment Mounting Base

015268909
404-25-S-1/DPA-0: RNCC: 3 | RNVC: 2

11 Jan 2005

5975-01-527-2525
Electrical Equipment Cabinet

015272525
9306420: RNCC: 3 | RNVC: 2
NETBAY 9306420: RNCC: 5 | RNVC: 2

26 Jan 2005

5975-01-526-8896
Electrical Equipment Mounting Base

015268896
96064-03: RNCC: 3 | RNVC: 2

11 Jan 2005

5975-01-570-9922
Junction Box Assembly

015709922
10116924-101: RNCC: 3 | RNVC: 2

21 Jan 2009

5975-01-570-2538
Cable Hanger

015702538
389536-2: RNCC: 3 | RNVC: 2

18 Dec 2008

5975-01-570-8800
Electrical-Electronic Equipment Panel

015708800
68T060393-2005: RNCC: 3 | RNVC: 2

15 Jan 2009

5975-01-570-4407
Flexible Metal Conduit

015704407
5-63974-33: RNCC: 3 | RNVC: 2

30 Dec 2008

5975-01-570-8796
Electrical-Electronic Equipment Panel

015708796
68T060393-2001: RNCC: 3 | RNVC: 2

15 Jan 2009

5975-01-570-6184
Cord Connector

015706184
87868: RNCC: 3 | RNVC: 2

7 Jan 2009

5975-01-571-5162
Electrical Equipment Rack

015715162
XTACSM2R01A0A2500: RNCC: 3 | RNVC: 2

5 Feb 2009

5975-01-571-6049
Electrical-Electronic Equipment Chassis

015716049
PXI-1036: RNCC: 3 | RNVC: 2

10 Feb 2009

5975-01-572-1621
Electronic Junction Rack

015721621
RR1061-13: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-572-1622
Electronic Junction Rack

015721622
RR1061-15: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-572-0274
Junction Box

015720274
9525-200-78585: RNCC: 3 | RNVC: 2

25 Feb 2009

5975-01-572-1623
Electronic Junction Rack

015721623
RR1061-2: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-685-2054
Cable Terminal Chamber

016852054
TBX-3LC: RNCC: 3 | RNVC: 2

5 Dec 2019

5975-01-685-9034
Electrical Equipment Mounting Base

016859034
360438-3: RNCC: 3 | RNVC: 2

21 Jan 2020

5975-01-689-3855
Electrical Equipment Rack

016893855
P9L16A: RNCC: 3 | RNVC: 2

18 Jun 2020

5975-01-685-6662
Electrical-Electronic Equipment Chassis

016856662
K10055570-1: RNCC: 3 | RNVC: 2

7 Jan 2020

5975-01-686-4291
Electronic Equipment Mounting Tray

016864291
UPB95675-1: RNCC: 3 | RNVC: 2
UPB95675-1: RNCC: 5 | RNVC: 2

13 Feb 2020

5975-01-685-7668
Electrical Equipment Drawer

016857668
SHS-1U-28: RNCC: 3 | RNVC: 2

13 Jan 2020

5975-01-687-0003
Electrical Equipment Rack

016870003
RK419WALVS: RNCC: 3 | RNVC: 2

12 Mar 2020

5975-01-688-8166
Electronic Junction Rack

016888166
12050-3200-01: RNCC: 3 | RNVC: 2

27 May 2020

5975-01-688-8037
Electrical Equipment Rack

016888037
P9K06A: RNCC: 3 | RNVC: 2
AA8107048500: RNCC: 5 | RNVC: 2

27 May 2020

5975-01-688-8312
Electrical-Electronic Equipment Chassis

016888312
246-C20586-4: RNCC: 3 | RNVC: 1

28 May 2020

5975-01-690-1587
Electrical Components Tie Down Strap

016901587
WB8100: RNCC: 3 | RNVC: 2

29 Jul 2020

5975-01-689-0870
Electronic Junction Rack

016890870
075-0400-01: RNCC: 3 | RNVC: 2

4 Jun 2020

5975-01-690-8020
Electrical-Electronic Equipment Chassis

016908020
10564-2527-06: RNCC: 3 | RNVC: 2

2 Sep 2020

5975-01-690-8114
Blank Panel

016908114
K10055601-1: RNCC: 3 | RNVC: 2

2 Sep 2020

5975-01-690-5425
Electronic Junction Rack

016905425
CTJ-3A-14: RNCC: 3 | RNVC: 2

18 Aug 2020

5975-01-660-4219
Blank Panel

016604219
39278-90039-1: RNCC: 1 | RNVC: 2
7MH-000-1248: RNCC: 3 | RNVC: 2

20 Jan 2017

5975-01-687-4705
Electrical-Electronic Equipment Panel

016874705
65550-03060-104: RNCC: 3 | RNVC: 1

2 Apr 2020

5975-01-689-4174
Chassis Base

016894174
11053-4500-01: RNCC: 3 | RNVC: 2

19 Jun 2020

5975-01-251-4023
Electrical-Electronic Equipment Chassis

012514023
621-1533-002: RNCC: 3 | RNVC: 2

19 Mar 1987

5975-01-569-6181
Electrical Equipment Shelf

015696181
708773: RNCC: 3 | RNVC: 2

4 Dec 2008

5975-01-522-1509
Mount Cable Tie

015221509
CB4019-C-5-NB: RNCC: 3 | RNVC: 2

20 Jul 2004

5975-01-523-1244
Electrical Conduit Adapter

015231244
100020-FA1200: RNCC: 3 | RNVC: 2
E1110-355-20: RNCC: 5 | RNVC: 9

20 Aug 2004

5975-01-563-4347
Electrical Conduit Adapter

015634347
SE1E0608A-3.0-4: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-566-8562
Electrical-Electronic Equipment Chassis

015668562
WE100H: RNCC: 3 | RNVC: 2
WW100H+SE-30: RNCC: 5 | RNVC: 9

11 Sep 2008

5975-01-570-4038
Electrical Equipment Cabinet Subassy

015704038
204-57454-2: RNCC: 3 | RNVC: 2

29 Dec 2008

5975-01-570-1369
Strain Electrical Conductor Clamp

015701369
BACC10DW40D: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-570-1378
Electrical Equipment Rack Base

015701378
204-32758-4: RNCC: 3 | RNVC: 2

16 Dec 2008

5975-01-681-4801
Electrical Equipment Rack

016814801
85Y5897: RNCC: 3 | RNVC: 2

19 Jun 2019

5975-01-682-0093
Electrical-Electronic Equipment Panel

016820093
385102704: RNCC: 3 | RNVC: 2

17 Jul 2019

5975-01-682-0529
Electrical Entrance Cap Shell

016820529
1003880-025BG01: RNCC: 3 | RNVC: 2

18 Jul 2019

5975-01-681-0058
Electronic Equipment Mounting Tray

016810058
403631-01: RNCC: 3 | RNVC: 2

31 May 2019

5975-01-681-6865
Electrical Components Tie Down Strap

016816865
SST1.5I-M30: RNCC: 3 | RNVC: 2

28 Jun 2019

5975-01-681-5572
Chassis Base

016815572
C9410-FAN: RNCC: 3 | RNVC: 2

22 Jun 2019

5975-01-684-6932
Electrical Components Tie Down Strap

016846932
TY25M-9: RNCC: 3 | RNVC: 2

13 Nov 2019

5975-01-684-6910
Electrical Components Tie Down Strap

016846910
TY25M-7: RNCC: 3 | RNVC: 2

13 Nov 2019

5975-01-680-9604
Electrical Equipment Rack Base

016809604
AIR-CT3504-RMNT: RNCC: 3 | RNVC: 2

30 May 2019

5975-01-682-6499
Electrical Wall Plate

016826499
72D420577-2001: RNCC: 3 | RNVC: 2

16 Aug 2019

5975-01-685-2049
Cable Terminal Chamber

016852049
TERMINATOR DP: RNCC: 3 | RNVC: 2

5 Dec 2019

5975-01-304-3817
Conduit Outlet

013043817
710-M006N02: RNCC: 3 | RNVC: 2

18 Jul 1989

5975-01-681-5748
Electrical Equipment Rack

016815748
GRW-2018508: RNCC: 3 | RNVC: 9

24 Jun 2019

5975-01-545-4308
Electrical Equipment Shelf

015454308
8026507: RNCC: 3 | RNVC: 2
T0079165: RNCC: 5 | RNVC: 2
T0079165: RNCC: 5 | RNVC: 2

13 Nov 2006

5975-01-521-1072
Electrical Components Tie Down Strap

015211072
Z22-0001-003: RNCC: 3 | RNVC: 2

9 Jun 2004

5975-01-521-7222
Electrical Components Tie Down Strap

015217222
CB9513P5-21: RNCC: 3 | RNVC: 2
9D0322T500: RNCC: 5 | RNVC: 2

30 Jun 2004

5975-01-518-3064
Electrical Equipment Drawer

015183064
95-730-D-G3: RNCC: 3 | RNVC: 2

8 Mar 2004

5975-01-678-5579
Electrical-Electronic Equipment Chassis

016785579
MX240BASE-AC-LOW: RNCC: 3 | RNVC: 2
MX240BASE-AC-LOW: RNCC: 5 | RNVC: 2

13 Feb 2019

5975-01-679-4538
Electrical-Electronic Equipment Panel

016794538
DPC-SCB-BLANK: RNCC: 3 | RNVC: 2
DPC-SCB-BLANK: RNCC: 5 | RNVC: 2

25 Mar 2019

5975-01-679-0466
Electrical Equipment Rack

016790466
1010820-01: RNCC: 3 | RNVC: 2
1010820-01: RNCC: 3 | RNVC: 9

7 Mar 2019

5975-01-679-7045
Electrical-Electronic Equipment Chassis

016797045
MIC-SPR-BD: RNCC: 3 | RNVC: 2

8 Apr 2019

5975-01-677-8847
Electrical-Electronic Equipment Panel

016778847
310104420: RNCC: 3 | RNVC: 2

10 Jan 2019

5975-01-676-1911
Electrical Equipment Cabinet

016761911
3208730-DT: RNCC: 3 | RNVC: 2

17 Oct 2018

5975-01-237-1964
Data Back Panel Asy

012371964
57977-40185-2: RNCC: 3 | RNVC: 2

26 Jul 1986

5975-01-233-3697
Panel

012333697
7481993P2: RNCC: 3 | RNVC: 2

30 May 1986

5975-01-518-0583
Guide Rail

015180583
81-1337-9: RNCC: 3 | RNVC: 2

1 Mar 2004

5975-01-518-3072
Switch Terminal Cover

015183072
95-728-D-PART 10: RNCC: 3 | RNVC: 2

8 Mar 2004

5975-01-518-7785
Electronic Equipment Mounting Tray

015187785
RF-5072VSM-050: RNCC: 3 | RNVC: 2

23 Mar 2004

5975-01-168-7408
Strain Electrical Conductor Clamp

011687408
A821700G4: RNCC: 3 | RNVC: 2

22 Dec 1983

5975-01-646-7784
Mounting Plate

016467784
66750-101: RNCC: 3 | RNVC: 2

30 Jul 2015

5975-01-272-6027
Cable Terminal Chamber

012726027
218805: RNCC: 3 | RNVC: 2

11 Feb 1988

5975-01-188-0012
Electrical-Electronic Equipment Chassis

011880012
487J110-112: RNCC: 3 | RNVC: 2

29 Aug 1984

5975-01-297-9691
Electrical-Electronic Equipment Panel

012979691
35-732F00M02: RNCC: 3 | RNVC: 9
35-732-F00: RNCC: 5 | RNVC: 9

8 Apr 1989

5975-01-207-6761
Junction Box Assembly

012076761
U2146172366-2: RNCC: 3 | RNVC: 9

4 May 1985

5975-01-464-5060
Stuffing Tube

014645060
1711019-139: RNCC: 3 | RNVC: 2

3 May 1999

5975-01-460-3236
Electrical-Electronic Equipment Panel

014603236
5620A-168-007: RNCC: 3 | RNVC: 2
5620A-168-007: RNCC: 3 | RNVC: 9
5620A-168-007: RNCC: 5 | RNVC: 2
5620A-168-007: RNCC: 5 | RNVC: 9
HP5620A-168-007: RNCC: 5 | RNVC: 9

2 Nov 1998

5975-01-461-4212
Blank Panel

014614212
E7725A: RNCC: 3 | RNVC: 2

11 Dec 1998

5975-01-492-7458
Electrical-Electronic Equipment Panel

014927458
CCH-CP06-91: RNCC: 3 | RNVC: 2

11 Dec 2001

5975-01-492-5398
Electrical-Electronic Equipment Chassis

014925398
A405A086-50: RNCC: 3 | RNVC: 2

3 Dec 2001

5975-01-493-6984
Electrical Grounding Plate

014936984
4254508-1: RNCC: 3 | RNVC: 2
4254508-1: RNCC: 5 | RNVC: 2

15 Jan 2002

5975-01-492-9860
Flexible Metal Conduit Assembly

014929860
16755-1: RNCC: 3 | RNVC: 2

18 Dec 2001

5975-01-202-6347
Mount Cable Tiedown

012026347
TA1S10M: RNCC: 3 | RNVC: 2
6L.3892.002.00-659451: RNCC: 5 | RNVC: 2

5 Mar 1985

5975-01-214-8470
Electrical Components Tie Down Strap

012148470
11441068: RNCC: 1 | RNVC: 2
MS3368-1-9A: RNCC: 3 | RNVC: 2

16 Aug 1985

5975-00-710-4554
Stuffing Tube

007104554
REB49397: RNCC: 3 | RNVC: 2
MX2646U: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-608-9629
Metallic Raceway Assembly

016089629
0726016-8: RNCC: 3 | RNVC: 2
0726016-8: RNCC: 3 | RNVC: 9

13 Jul 2012

5975-01-608-5943
Electrical Equipment Mounting Base

016085943
RF-7800I-VM101: RNCC: 3 | RNVC: 2

3 Jul 2012

5975-01-608-9592
Electrical Components Tie Down Strap

016089592
B0816019-003: RNCC: 3 | RNVC: 2

13 Jul 2012

5975-01-476-8862
Electrical-Electronic Equipment Panel

014768862
120670-B21: RNCC: 3 | RNVC: 2

25 Jul 2000

5975-01-491-8836
Flexible Metal Conduit Assembly

014918836
310E060-11: RNCC: 3 | RNVC: 2

5 Nov 2001

5975-01-490-7775
Electrical Components Tie Down Strap

014907775
PLT3H-L30: RNCC: 3 | RNVC: 2

5 Oct 2001

5975-00-221-2427
Electrical Equipment Cabinet

002212427
114D1344: RNCC: 3 | RNVC: 2
CY1050GRC26A: RNCC: 3 | RNVC: 2
WED2750: RNCC: 5 | RNVC: 9
WED2750: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-250-8715
Cable Spacer

012508715
219B9651P1: RNCC: 3 | RNVC: 2

8 Mar 1987

5975-00-975-0927
Conduit Outlet

009750927
GUAT16: RNCC: 3 | RNVC: 2
ST41D9-5: RNCC: 7 | RNVC: 2

1 Jan 1962

5975-01-605-8266
Electrical-Electronic Equipment Chassis

016058266
PXIE-1078 781622-01: RNCC: 3 | RNVC: 2

26 Apr 2012

5975-01-603-8014
Electrical Equipment Rack

016038014
BMA350MA: RNCC: 3 | RNVC: 2
HSA003267: RNCC: 5 | RNVC: 2

16 Mar 2012

5975-01-505-4432
Electrical Equipment Rack

015054432
393161-2: RNCC: 3 | RNVC: 2

6 Mar 2003

5975-01-507-9473
Electrical-Electronic Equipment Chassis

015079473
0428166-MISC: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-468-9243
Flexible Metal Conduit Assembly

014689243
254732: RNCC: 3 | RNVC: 2

27 Oct 1999

Load More Results