What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 197 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 197of 491

5975-01-288-9878
Electrical Equipment Rack

012889878
A3015091: RNCC: 3 | RNVC: 2
MT-6615/FSC-160(V): RNCC: 5 | RNVC: 2

17 Nov 1988

5975-01-288-5993
Electrical-Electronic Equipment Chassis

012885993
19D429414G2: RNCC: 3 | RNVC: 2

10 Nov 1988

5975-01-289-6889
Electrical-Electronic Equipment Panel

012896889
PL5380943: RNCC: 3 | RNVC: 2
PL5380943: RNCC: 5 | RNVC: 2

28 Nov 1988

5975-01-290-3684
Electrical-Electronic Equipment Panel

012903684
70450-24115-041: RNCC: 3 | RNVC: 2

9 Dec 1988

5975-01-201-0510
Electrical Cable Nipple

012010510
9-3540-008: RNCC: 3 | RNVC: 2

12 Feb 1985

5975-01-285-4200
Electrical-Electronic Equipment Chassis

012854200
03-119030: RNCC: 3 | RNVC: 2
03-119030: RNCC: 5 | RNVC: 9

14 Sep 1988

5975-01-286-6960
Electrical-Electronic Equipment Panel

012866960
0102-00-0665: RNCC: 3 | RNVC: 9

7 Oct 1988

5975-01-287-3857
Electrical Equipment Shelf

012873857
11457797: RNCC: 3 | RNVC: 2

21 Oct 1988

5975-01-217-6001
Electrical Cable Nipple

012176001
40N171-1S: RNCC: 3 | RNVC: 9
40N171-1S: RNCC: C | RNVC: 1

28 Sep 1985

5975-01-297-9555
Junction Box

012979555
5497762-9: RNCC: 3 | RNVC: 2

8 Apr 1989

5975-01-296-3910
Housing Control Box

012963910
4500131: RNCC: 3 | RNVC: 2

20 Mar 1989

5975-01-295-6290
Junction Box Assembly

012956290
70083-55115-041: RNCC: 3 | RNVC: 2

9 Mar 1989

5975-01-172-4355
Electrical Conduit Adapter

011724355
S694-124-87R: RNCC: 3 | RNVC: 2
533405-79: RNCC: 7 | RNVC: 2

21 Feb 1984

5975-01-293-4185
Cable Spacer

012934185
6533B876: RNCC: 3 | RNVC: 2

2 Feb 1989

5975-01-163-1058
Flexible Nonmetallic Conduit

011631058
Z0911A00: RNCC: 3 | RNVC: 2

28 Sep 1983

5975-01-291-0361
Post Rack

012910361
0021050230: RNCC: 3 | RNVC: 2
2105-2: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-01-305-1211
Plate

013051211
618-5080-001: RNCC: 3 | RNVC: 2

1 Aug 1989

5975-01-204-6876
Rigid Metal Conduit

012046876
125D20L125T: RNCC: 3 | RNVC: 2
125D20L125T: RNCC: 5 | RNVC: 9

29 Mar 1985

5975-01-303-6750
Electrical Components Tie Down Strap

013036750
696-40527-5-9: RNCC: 3 | RNVC: 2
696-40527-5-9-C: RNCC: 5 | RNVC: 2

4 Jul 1989

5975-01-301-0885
Electrical Equipment Mounting Base

013010885
2129: RNCC: 3 | RNVC: 2

25 May 1989

5975-01-646-7495
Electrical Equipment Mounting Base

016467495
4089238-0501: RNCC: 3 | RNVC: 2

29 Jul 2015

5975-01-652-6806
Blank Panel

016526806
4305: RNCC: 3 | RNVC: 9

1 Mar 2016

5975-01-660-3002
Electronic Equipment Mounting Tray

016603002
1-001-4401-0059: RNCC: 3 | RNVC: 2

17 Jan 2017

5975-01-647-9187
Electrical Conduit Adapter

016479187
25-8PF77-1: RNCC: 3 | RNVC: 2
25-8PF77-1: RNCC: 3 | RNVC: 9

8 Sep 2015

5975-01-649-2198
Electrical-Electronic Equipment Panel

016492198
CB07642-001: RNCC: 3 | RNVC: 2
CB07642: RNCC: D | RNVC: 9

21 Oct 2015

5975-01-299-7782
Electrical Components Tie Down Strap

012997782
SST1M-M-20: RNCC: 3 | RNVC: 2

5 May 1989

5975-01-299-0620
Strain Electrical Conductor Clamp

012990620
609-6431HD: RNCC: 3 | RNVC: 2
46 143-012: RNCC: 5 | RNVC: 2
609-6431HD: RNCC: 5 | RNVC: 2
609-6431HD: RNCC: 5 | RNVC: 9

25 Apr 1989

5975-01-673-8361
Electrical-Electronic Equipment Panel

016738361
RK-3V2: RNCC: 3 | RNVC: 9

28 Jun 2018

5975-01-661-4531
Interior Cable Rack

016614531
AR7588: RNCC: 3 | RNVC: 2

3 Mar 2017

5975-01-660-1426
Electrical Equipment Rack

016601426
ACX1MR-ARE: RNCC: 3 | RNVC: 2

6 Jan 2017

5975-01-663-0855
Junction Box

016630855
000-12325-001: RNCC: 3 | RNVC: 2

26 Apr 2017

5975-01-666-1190
Drive Ring

016661190
2076-168: RNCC: 3 | RNVC: 2

24 Aug 2017

5975-01-666-5185
Electrical Equipment Shelf

016665185
70600-82159-047: RNCC: 3 | RNVC: 2

11 Sep 2017

5975-01-318-1809
Electrical-Electronic Equipment Panel

013181809
6904-2043-1: RNCC: 3 | RNVC: 9

13 Apr 1990

5975-01-317-6839
Cable Marker Sleeve

013176839
SS7026-474: RNCC: 3 | RNVC: 2

4 Apr 1990

5975-01-317-6014
Electrical-Electronic Equipment Panel

013176014
901-3320-1: RNCC: 3 | RNVC: 2
901-3320-1: RNCC: 5 | RNVC: 9

1 Apr 1990

5975-01-624-7376
Insulator Bracket

016247376
502539-1: RNCC: 3 | RNVC: 2

14 Jan 2014

5975-01-624-7908
Mounting Plate

016247908
806-39105: RNCC: 3 | RNVC: 2

15 Jan 2014

5975-01-671-3262
Electrical Equipment Cabinet

016713262
60-1492-01: RNCC: 3 | RNVC: 2
60-1492-01: RNCC: 5 | RNVC: 2

22 Mar 2018

5975-01-672-6398
Electrical-Electronic Equipment Chassis

016726398
687-8648-001: RNCC: 3 | RNVC: 2

10 May 2018

5975-01-672-7045
Raceway Cover

016727045
T70CIW10: RNCC: 3 | RNVC: 2

14 May 2018

5975-01-672-2874
Blank Panel

016722874
PA1907M: RNCC: 3 | RNVC: 2

26 Apr 2018

5975-01-315-5840
Electrical Equipment Cabinet

013155840
66601-154: RNCC: 3 | RNVC: 2
8861606: RNCC: 5 | RNVC: 9

20 Feb 1990

5975-01-315-9245
Electrical Equipment Cabinet

013159245
1D20991G01: RNCC: 3 | RNVC: 2

27 Feb 1990

5975-01-617-4436
Electrical-Electronic Equipment Panel

016174436
0002-9082-301: RNCC: 3 | RNVC: 2

22 Mar 2013

5975-01-618-9272
Electrical Components Tie Down Strap

016189272
7338K34: RNCC: 3 | RNVC: 2

10 May 2013

5975-01-619-3182
Cable Marker Sleeve

016193182
HT-SCE-1K-1-2.0-0: RNCC: 3 | RNVC: 2

24 May 2013

5975-01-619-9509
Electrical Equipment Drawer

016199509
VNX6GSDAE25: RNCC: 3 | RNVC: 2

24 Jun 2013

5975-01-617-5217
Electrical Equipment Shelf

016175217
AMT2144: RNCC: 3 | RNVC: 2

26 Mar 2013

5975-01-620-2339
Electrical Equipment Rack

016202339
507750-01: RNCC: 3 | RNVC: 2

11 Jul 2013

5975-01-313-7519
Electrical Equipment Rack

013137519
10242-6100: RNCC: 3 | RNVC: 2

16 Jan 1990

5975-01-312-8180
Electrical Equipment Cabinet

013128180
CY8362ABRC: RNCC: 3 | RNVC: 2

22 Dec 1989

5975-01-311-9021
Strain Electrical Conductor Clamp

013119021
076-006891-001: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-641-0405
Electrical-Electronic Equipment Panel

016410405
CB13892-001: RNCC: 3 | RNVC: 2

7 Jan 2015

5975-01-615-2965
Electrical Components Tie Down Strap

016152965
L-48-175-9L: RNCC: 3 | RNVC: 2
L-48-175-9L: RNCC: 5 | RNVC: 2
L-48-175-9L: RNCC: 5 | RNVC: 9

8 Jan 2013

5975-01-339-3731
Flexible Metal Conduit Assembly

013393731
910289: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-339-4000
Rigid Metal Conduit Assembly

013394000
GA191-A24B2440-54NFS: RNCC: 3 | RNVC: 2

22 May 1991

5975-01-308-9474
Fab Hover

013089474
EC-10014-2: RNCC: 3 | RNVC: 2

8 Oct 1989

5975-01-632-9316
Electrical Equipment Rack

016329316
1076004: RNCC: 3 | RNVC: 2

4 Nov 2014

5975-01-338-0939
Electrical Box Connector

013380939
308: RNCC: 3 | RNVC: 2

26 Apr 1991

5975-01-337-7918
Electrical Equipment Cabinet

013377918
62100-600: RNCC: 3 | RNVC: 2
CY-5205/WIC501(V): RNCC: 5 | RNVC: 2

21 Apr 1991

5975-01-548-2724
Electrical Equipment Rack

015482724
77CD0152-2: RNCC: 3 | RNVC: 2

15 Feb 2007

5975-01-626-9742
Sdlp

016269742
09203089-01: RNCC: 3 | RNVC: 1

27 Mar 2014

5975-01-336-8402
Electrical-Electronic Equipment Chassis

013368402
5811910G1: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-233-7168
Electrical Equipment Cabinet

012337168
CY-2522D/WLR-1: RNCC: 3 | RNVC: 2
CY25220WLR-1: RNCC: 5 | RNVC: 9

1 Jun 1986

5975-01-541-2351
Electrical Equipment Cabinet

015412351
030777-0001: RNCC: 3 | RNVC: 2
5975PL1657740: RNCC: 6 | RNVC: 9

20 Jun 2006

5975-01-335-6550
Electrical Equipment Rack

013356550
85421489-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-540-2175
Electrical Tie Down Mounting Base

015402175
FT196: RNCC: 3 | RNVC: 9

11 May 2006

5975-01-538-2311
Electrical-Electronic Equipment Chassis

015382311
IPC-602P4-30ZB: RNCC: 3 | RNVC: 2

15 Mar 2006

5975-01-538-0873
Electrical Equipment Drawer

015380873
030664-0003: RNCC: 3 | RNVC: 2

9 Mar 2006

5975-01-658-6827
Electrical Equipment Shelf

016586827
7-511115240A19: RNCC: 3 | RNVC: 2

12 Oct 2016

5975-01-538-2255
Electrical Equipment Rack

015382255
2200133-206: RNCC: 3 | RNVC: 2

15 Mar 2006

5975-01-536-4290
Electronic Equipment Mounting Tray

015364290
198778-3: RNCC: 3 | RNVC: 2

4 Jan 2006

5975-01-332-0358
Junction Box Cover

013320358
3322215: RNCC: 3 | RNVC: 2

2 Jan 1991

5975-01-650-1104
Electrical-Electronic Equipment Chassis

016501104
GX7010CR: RNCC: 3 | RNVC: 2

19 Nov 2015

5975-01-649-3947
Guide Rail

016493947
RBGT22: RNCC: 3 | RNVC: 2

28 Oct 2015

5975-01-653-9763
Junction Box

016539763
FA02067: RNCC: 3 | RNVC: 2

13 Apr 2016

5975-01-657-1202
Electrical Equipment Rack

016571202
N5548-ACC-KIT: RNCC: 3 | RNVC: 2

29 Jul 2016

5975-01-647-8399
Electrical Components Tie Down Strap

016478399
BT1.5I-M30: RNCC: 3 | RNVC: 2
2556.0326: RNCC: 5 | RNVC: 2

3 Sep 2015

5975-01-330-4238
Electrical Equipment Rack

013304238
0PTI0N62: RNCC: 3 | RNVC: 2
91544981: RNCC: 5 | RNVC: 2
OPTION62: RNCC: 5 | RNVC: 2
OPTION62: RNCC: 5 | RNVC: 9

4 Dec 1990

5975-01-328-6737
Electrical Cable Protector

013286737
9315TR-4-1712A: RNCC: 3 | RNVC: 9

6 Nov 1990

5975-01-630-4161
Electrical-Electronic Equipment Panel

016304161
DT-RAP12: RNCC: 3 | RNVC: 9

4 Aug 2014

5975-01-676-7132
Electrical Equipment Rack

016767132
SGR-12-12: RNCC: 3 | RNVC: 9

8 Nov 2018

5975-01-683-4202
Cable Hanger

016834202
D-RING: RNCC: 3 | RNVC: 9

23 Sep 2019

5975-01-690-0760
Electrical Equipment Rack

016900760
RACK-151-18U: RNCC: 3 | RNVC: 9

24 Jul 2020

5975-01-690-8297
Electrical Conduit Adapter

016908297
9361: RNCC: 3 | RNVC: 2

3 Sep 2020

5975-01-692-0635
Electrical Equipment Rack

016920635
16E5366-15: RNCC: 3 | RNVC: 2
16E5366-15: RNCC: 5 | RNVC: 2

17 Nov 2020

5975-01-692-2103
Electrical Equipment Drawer

016922103
BC029A: RNCC: 3 | RNVC: 2
92236722: RNCC: 5 | RNVC: 2
BC029A: RNCC: 5 | RNVC: 2

30 Nov 2020

5975-01-692-0655
Electronic Equipment Mounting Tray

016920655
16E5423-5P: RNCC: 3 | RNVC: 2
16E5423-5P: RNCC: 5 | RNVC: 2

17 Nov 2020

5975-01-692-4532
Electrical Equipment Rack

016924532
SLR-HCM: RNCC: 3 | RNVC: 2

15 Dec 2020

5975-01-694-5862
Electrical Equipment Mounting Base

016945862
FORAX-SYN-RCHASSIS-5LINK: RNCC: 3 | RNVC: 2

12 Apr 2021

5975-01-694-4949
Electrical Equipment Shelf

016944949
10400-0582-01: RNCC: 3 | RNVC: 2

6 Apr 2021

5975-01-695-3230
Electrical Equipment Mounting Base

016953230
200-10902-101: RNCC: 3 | RNVC: 2

28 May 2021

5975-01-695-8266
Electrical Conduit Union

016958266
STR200B: RNCC: 3 | RNVC: 2

24 Jun 2021

5975-01-696-8891
Electronic Equipment Mounting Tray

016968891
MT6-3310-104: RNCC: 3 | RNVC: 2

23 Aug 2021

5975-01-691-7736
Ground Rod

016917736
M297749: RNCC: 3 | RNVC: 2

28 Oct 2020

5975-01-692-1334
Electrical Components Tie Down Strap

016921334
PLT3S-M76: RNCC: 3 | RNVC: 2

20 Nov 2020

5975-01-220-0633
Blank Panel

012200633
5060-8372: RNCC: 3 | RNVC: 2

8 Nov 1985

5975-01-561-1451
Electrical Equipment Rack

015611451
8519599-902: RNCC: 3 | RNVC: 2
8519599-902 REV A: RNCC: 5 | RNVC: 2
8519599-902 REV B: RNCC: 5 | RNVC: 2

26 Feb 2008

5975-01-563-4027
Electrical-Electronic Equipment Chassis

015634027
UXP95739-1: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-563-4072
Electrical Bushing

015634072
RL16-6: RNCC: 3 | RNVC: 2

10 May 2008

5975-01-564-6308
Electrical-Electronic Equipment Panel

015646308
905322-01: RNCC: 3 | RNVC: 2

23 Jun 2008

5975-01-557-4477
Electrical Equipment Rack

015574477
SURTRK2: RNCC: 3 | RNVC: 2
SURTRK2: RNCC: 5 | RNVC: 2
SURTRK2: RNCC: 5 | RNVC: 2
40058267: RNCC: 5 | RNVC: 2
SURTRK2: RNCC: 5 | RNVC: 2
SURTRK2: RNCC: 5 | RNVC: 9

23 Oct 2007

5975-01-560-1490
Electrical-Electronic Equipment Chassis

015601490
5098SNG12ES-100: RNCC: 3 | RNVC: 2

16 Jan 2008

5975-01-326-1682
Electrical Nonmetallic Conduit Assembly

013261682
S6165-20635-000: RNCC: 3 | RNVC: 2
S6165-20635: RNCC: D | RNVC: 9

20 Sep 1990

5975-01-326-6203
Electrical Cable Protector

013266203
3491231: RNCC: 3 | RNVC: 2

27 Sep 1990

5975-01-690-3117
Electrical Cable Ground Guard

016903117
FL2X1.75-O: RNCC: 3 | RNVC: 9
06495027: RNCC: 5 | RNVC: 2

5 Aug 2020

5975-01-690-7869
Mounting Plate

016907869
K10048826-1: RNCC: 3 | RNVC: 2

1 Sep 2020

5975-01-689-8124
Electrical Equipment Cabinet

016898124
94710: RNCC: 3 | RNVC: 1

13 Jul 2020

5975-01-686-8155
Ground Rod

016868155
EARTH-STAKE: RNCC: 3 | RNVC: 2

5 Mar 2020

5975-01-687-0700
Junction Box

016870700
844E2424-12: RNCC: 3 | RNVC: 2

17 Mar 2020

5975-01-687-2234
Junction Box

016872234
62828-2A6-2: RNCC: 3 | RNVC: 2

24 Mar 2020

5975-01-687-3490
Electrical Grounding Plate

016873490
30283-0201: RNCC: 3 | RNVC: 1

30 Mar 2020

5975-01-686-6204
Mounting Plate

016866204
724G5012-201: RNCC: 3 | RNVC: 2

26 Feb 2020

5975-01-686-7531
Interconnecting Box

016867531
1039-4000-01-001: RNCC: 3 | RNVC: 2

3 Mar 2020

5975-01-686-4305
Electronic Equipment Mounting Tray

016864305
UPB13340-1: RNCC: 3 | RNVC: 2
UPB13340-1: RNCC: 5 | RNVC: 2

13 Feb 2020

5975-01-686-1649
Electrical Wall Plate

016861649
70-1032-05: RNCC: 3 | RNVC: 2

3 Feb 2020

5975-01-687-3000
Junction Box

016873000
844E2160-4: RNCC: 3 | RNVC: 2

26 Mar 2020

5975-01-689-2458
Electrical Equipment Drawer

016892458
8102700-012: RNCC: 3 | RNVC: 2

11 Jun 2020

5975-01-685-1668
Electrical Equipment Rack

016851668
P9K04A: RNCC: 3 | RNVC: 2
VCH114107P01: RNCC: 5 | RNVC: 2

4 Dec 2019

5975-01-687-7288
Electrical Equipment Rack Base

016877288
TATR-CL-S: RNCC: 3 | RNVC: 9

15 Apr 2020

5975-01-550-2727
Chassis Base

015502727
144312-1: RNCC: 3 | RNVC: 2

13 Apr 2007

5975-01-550-2093
Electrical-Electronic Equipment Chassis

015502093
12019-3020-01: RNCC: 3 | RNVC: 2

12 Apr 2007

5975-01-550-3218
Electrical-Electronic Equipment Chassis

015503218
R548731-01: RNCC: 3 | RNVC: 2

16 Apr 2007

5975-01-551-9672
Electrical Cable Support

015519672
HLS1012B: RNCC: 3 | RNVC: 2
HLS1006B: RNCC: 5 | RNVC: 9

31 May 2007

5975-01-322-7490
Electrical Equipment Mounting Base

013227490
13028912-2: RNCC: 3 | RNVC: 2

13 Jul 1990

5975-01-324-2775
Stand-Off Bushing

013242775
130-07-AL-8-32P: RNCC: 3 | RNVC: 2

14 Aug 1990

5975-01-685-4529
Stuffing Tube Plug

016854529
AIO-CSJM27: RNCC: 3 | RNVC: 2

18 Dec 2019

5975-01-685-9001
Mounting Plate

016859001
K10055797-1: RNCC: 3 | RNVC: 2

21 Jan 2020

5975-01-685-4057
Cable Hanger

016854057
EWSH-127A: RNCC: 3 | RNVC: 2

16 Dec 2019

5975-01-549-8916
Junction Box

015498916
140-054XMS0004GMC: RNCC: 3 | RNVC: 2
140-054XMS0004GMC: RNCC: 5 | RNVC: 2

2 Apr 2007

5975-01-550-9006
Electrical-Electronic Equipment Chassis

015509006
CISCO 4506: RNCC: 3 | RNVC: 2

2 May 2007

5975-01-355-5866
Electrical Equipment Rack

013555866
10301-1400: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-01-379-4283
Cable Terminal Chamber

013794283
WRSS60/300-48: RNCC: 3 | RNVC: 2

31 Aug 1993

5975-01-578-5367
Electrical Components Tie Down Strap

015785367
TY175-50-20: RNCC: 3 | RNVC: 2

9 Oct 2009

5975-01-576-5127
Cable Rack Extension

015765127
P1H08-0B1B: RNCC: 3 | RNVC: 2
32-01336: RNCC: 5 | RNVC: 2

4 Aug 2009

5975-01-578-6228
Electrical Equipment Cabinet

015786228
458032-B21: RNCC: 3 | RNVC: 2
458032R-B21: RNCC: 5 | RNVC: 2

14 Oct 2009

5975-01-319-7652
Cable Marker Sleeve

013197652
SS7074-3060: RNCC: 3 | RNVC: 2

15 May 1990

5975-01-320-4337
Electrical Equipment Mounting Base

013204337
628-6561-005: RNCC: 3 | RNVC: 2

25 May 1990

5975-01-351-8391
Electrical Equipment Mounting Base

013518391
3661392-1: RNCC: 3 | RNVC: 2

16 Jan 1992

5975-01-351-9919
Electrical Equipment Cabinet

013519919
819596-1: RNCC: 3 | RNVC: 2

17 Jan 1992

5975-01-352-5033
Electrical Components Tie Down Strap

013525033
SST1M-9: RNCC: 3 | RNVC: 2
272.303 031: RNCC: 5 | RNVC: 2

27 Jan 1992

5975-01-354-1939
Electrical-Electronic Equipment Panel

013541939
VMIVME-4500A: RNCC: 3 | RNVC: 2

25 Feb 1992

5975-01-352-4910
Flexible Metal Conduit Assembly

013524910
CH10-0192-418-03-SM: RNCC: 3 | RNVC: 2

27 Jan 1992

5975-01-585-6402
Ground Rod

015856402
7911973-00: RNCC: 3 | RNVC: 2

1 Jun 2010

5975-01-585-9057
Electrical-Electronic Equipment Panel

015859057
107677: RNCC: 3 | RNVC: 2

11 Jun 2010

5975-01-585-9837
Cable Strain Relief Bushing

015859837
70.010.558.4.1: RNCC: 3 | RNVC: 2

15 Jun 2010

5975-01-587-5251
Metallic Raceway Assembly

015875251
FW46-136: RNCC: 3 | RNVC: 2

10 Aug 2010

5975-01-394-0965
Electrical Equipment Rack

013940965
404-38-S-NR-0: RNCC: 3 | RNVC: 2

2 Aug 1994

5975-01-349-9157
Electrical-Electronic Equipment Panel

013499157
3661854-1: RNCC: 3 | RNVC: 2

6 Dec 1991

5975-01-394-7778
Nonmetallic Raceway Assembly

013947778
RMV8-010: RNCC: 3 | RNVC: 9

16 Aug 1994

5975-01-583-2185
Electrical Equipment Mounting Base

015832185
5406-02-0002: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-584-2737
Electrical-Electronic Equipment Chassis

015842737
E-1000: RNCC: 3 | RNVC: 2

21 Apr 2010

5975-01-586-0588
Electrical Cable Protector

015860588
14103302: RNCC: 3 | RNVC: 2

17 Jun 2010

5975-01-583-4376
Electrical Box Connector

015834376
327-0375: RNCC: 3 | RNVC: 2

25 Mar 2010

5975-01-583-4849
Electrical Equipment Leg

015834849
5406-08-0049: RNCC: 3 | RNVC: 2

26 Mar 2010

5975-01-391-4503
Electrical Nonmetallic Conduit Assembly

013914503
57350-15: RNCC: 3 | RNVC: 2

10 Jun 1994

5975-01-582-2774
Cover-Cable

015822774
25FC7885: RNCC: 3 | RNVC: 2
25FC7885: RNCC: 3 | RNVC: 9

13 Feb 2010

5975-01-582-1523
Bias Tee

015821523
8800SFM2-02: RNCC: 3 | RNVC: 2

9 Feb 2010

5975-01-391-0619
Electrical-Electronic Equipment Chassis

013910619
476204-01: RNCC: 3 | RNVC: 2

2 Jun 1994

5975-01-391-0480
Electrical-Electronic Equipment Panel

013910480
13215622-01: RNCC: 3 | RNVC: 9

2 Jun 1994

5975-01-237-5596
Junction Box

012375596
8766105-1: RNCC: 3 | RNVC: 2
8766105-1: RNCC: 3 | RNVC: 9

1 Aug 1986

5975-01-233-7163
Junction Box

012337163
1213D1412: RNCC: 3 | RNVC: 2
1213E1180 FIND 18: RNCC: 5 | RNVC: 2
1213D1412: RNCC: 5 | RNVC: 9
1213E1180 FIND 18: RNCC: 5 | RNVC: 9

1 Jun 1986

5975-01-231-8967
Junction Box Cover

012318967
176C2298: RNCC: 3 | RNVC: 2

6 May 1986

5975-01-345-9063
Electrical Equipment Cabinet

013459063
218F384: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-346-5540
Blank Panel

013465540
DAA3233D537-005: RNCC: 3 | RNVC: 2

8 Oct 1991

5975-01-345-7031
Electrical-Electronic Equipment Panel

013457031
10278-0145: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-277-1617
Drive Plate

012771617
47607A1: RNCC: 3 | RNVC: 2

19 Apr 1988

5975-01-342-9397
Electrical-Electronic Equipment Chassis

013429397
3441897: RNCC: 3 | RNVC: 2

2 Aug 1991

5975-01-343-5741
Stuffing Tube Adapter

013435741
M19622/9-003: RNCC: 2 | RNVC: 2

15 Aug 1991

5975-01-343-9329
Electrical Equipment Cabinet

013439329
719995-2: RNCC: 3 | RNVC: 2

20 Aug 1991

5975-01-343-4974
Flexible Metal Conduit Assembly

013434974
NAF1150-4A54: RNCC: 3 | RNVC: 2

14 Aug 1991

5975-01-343-6072
Electrical Cable Nipple

013436072
11971: RNCC: 3 | RNVC: 2
11971: RNCC: 5 | RNVC: 9

15 Aug 1991

5975-01-344-2991
Strain Electrical Conductor Clamp

013442991
31670-1: RNCC: 3 | RNVC: 2

27 Aug 1991

5975-01-223-9428
Cable Marker Sleeve

012239428
322367-21: RNCC: 3 | RNVC: 2

10 Jan 1986

5975-01-227-2644
Electrical Equipment Cabinet

012272644
110D172G2: RNCC: 3 | RNVC: 2

1 Mar 1986

5975-01-222-2612
Blank Panel

012222612
406771: RNCC: 3 | RNVC: 2

10 Dec 1985

5975-01-342-0943
Electrical Conduit Elbow

013420943
L144: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-1515
Electrical-Electronic Equipment Panel

013421515
31000-503: RNCC: 3 | RNVC: 2
31000: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-342-6985
Electrical Cable Nipple

013426985
2159552-1: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-6987
Electrical Cable Nipple

013426987
2159545: RNCC: 3 | RNVC: 2

29 Jul 1991

5975-01-342-1195
Electrical Box Connector

013421195
2687: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-343-5397
Electrical Equipment Rack

013435397
FA-77-22: RNCC: 3 | RNVC: 9

14 Aug 1991

5975-01-343-0749
Electrical-Electronic Equipment Panel

013430749
6999ED1704GP1: RNCC: 3 | RNVC: 1

4 Aug 1991

5975-01-342-1518
Electrical-Electronic Equipment Panel

013421518
ISBC548: RNCC: 3 | RNVC: 9

16 Jul 1991

5975-01-208-0616
Electrical-Electronic Equipment Chassis

012080616
11776666: RNCC: 3 | RNVC: 2
60082-238: RNCC: 5 | RNVC: 2

8 May 1985

5975-01-086-4482
Electrical Components Tie Down Strap

010864482
10S300-2-125: RNCC: 3 | RNVC: 9
10S300-2-125: RNCC: C | RNVC: 1

29 Nov 1979

5975-01-214-1437
Electrical Equipment Drawer

012141437
16U1459-805: RNCC: 3 | RNVC: 2

6 Aug 1985

5975-01-386-6892
Electrical-Electronic Equipment Chassis

013866892
1C9879G1: RNCC: 3 | RNVC: 2

11 Feb 1994

5975-01-340-7525
Junction Box

013407525
4SSLD1-2: RNCC: 3 | RNVC: 2

19 Jun 1991

5975-01-341-1223
Electrical Conduit Adapter

013411223
606AL: RNCC: 3 | RNVC: 2

25 Jun 1991

5975-01-179-4329
Electrical-Electronic Equipment Chassis

011794329
16U224-19: RNCC: 3 | RNVC: 2

18 May 1984

5975-01-185-6645
Wire Strand Hanger

011856645
128787-1: RNCC: 3 | RNVC: 2

1 Aug 1984

5975-00-968-3303
Conduit Outlet

009683303
C28: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-384-4008
Junction Box

013844008
E981FF: RNCC: 3 | RNVC: 9

15 Dec 1993

5975-01-384-4895
Subasse Plug Module

013844895
TW1000/400MOD: RNCC: 3 | RNVC: 2

16 Dec 1993

5975-01-117-4853
Strap Tiedown

011174853
25-000109-008: RNCC: 3 | RNVC: 9

15 Aug 1981

5975-01-097-4701
Blank Panel

010974701
40179: RNCC: 3 | RNVC: 9

12 Jul 1980

5975-01-116-1726
Junction Box

011161726
12277875: RNCC: 3 | RNVC: 2
12277875: RNCC: 3 | RNVC: 9

22 Jul 1981

5975-01-105-4233
Conduit

011054233
3150000-602-5: RNCC: 3 | RNVC: 2

23 Dec 1980

5975-01-379-5018
Cable Terminal Chamber

013795018
WRSS60/300-12: RNCC: 3 | RNVC: 2

31 Aug 1993

5975-01-380-5662
Cable Hanger

013805662
2907708: RNCC: 3 | RNVC: 2

21 Sep 1993

5975-01-382-4618
Electrical Components Tie Down Strap

013824618
SC-B-539-492: RNCC: 3 | RNVC: 2

3 Nov 1993

5975-01-326-6505
Wiring Duct

013266505
E1X1.5LG6: RNCC: 3 | RNVC: 2

28 Sep 1990

5975-01-328-5924
Conduit

013285924
200266-0024: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-254-3883
Electrical Components Tie Down Strap

012543883
PLT1-5MM20: RNCC: 3 | RNVC: 2
8920995929: RNCC: 5 | RNVC: 2

5 May 1987

5975-01-008-2163
Electrical-Electronic Equipment Chassis

010082163
16904: RNCC: 3 | RNVC: 9

17 Aug 1975

5975-01-323-2233
Electrical Nonmetallic Conduit Assembly

013232233
42-40730: RNCC: 3 | RNVC: 2

25 Jul 1990

5975-01-322-9099
Electrical-Electronic Equipment Chassis

013229099
709341-1: RNCC: 3 | RNVC: 2

17 Jul 1990

5975-01-322-1682
Electrical-Electronic Equipment Chassis

013221682
132AA7000: RNCC: 3 | RNVC: 2

29 Jun 1990

5975-01-323-1483
Electrical Equipment Mounting Base

013231483
13027543: RNCC: 3 | RNVC: 2

22 Jul 1990

5975-01-324-3457
Electrical-Electronic Equipment Panel

013243457
8500137-901: RNCC: 3 | RNVC: 2

15 Aug 1990

5975-01-323-7058
Electrical-Electronic Equipment Chassis

013237058
2040400-501: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-004-1536
Electrical Conductor Bushing

010041536
2083: RNCC: 3 | RNVC: 2
SB687-8: RNCC: 5 | RNVC: 9

26 May 1975

5975-01-363-9997
Electrical Equipment Cabinet

013639997
408481-1: RNCC: 3 | RNVC: 2

11 Sep 1992

5975-01-319-6255
Electrical Conduit Adapter

013196255
43539: RNCC: 3 | RNVC: 2

11 May 1990

5975-01-319-6892
Panel Rh Ovhd

013196892
PC570-NVG: RNCC: 3 | RNVC: 2
95-3844-2: RNCC: 5 | RNVC: 2
70550-01166-102: RNCC: 5 | RNVC: 2

12 May 1990

5975-01-365-7589
Electrical Wall Plate

013657589
074-000018-00: RNCC: 3 | RNVC: 2

13 Oct 1992

5975-01-046-5154
Conduit

010465154
29J0449-7: RNCC: 3 | RNVC: 2
29J0449-7: RNCC: 5 | RNVC: 9

19 Aug 1977

5975-01-048-8257
Blank Panel

010488257
1064903G001: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-01-138-4146
Electrical Components Tie Down Strap

011384146
PLC1M-S4-8: RNCC: 3 | RNVC: 2
TY-33M-8: RNCC: 3 | RNVC: 2
918334-102: RNCC: 5 | RNVC: 2
10134329: RNCC: 6 | RNVC: 9

11 Sep 1982

5975-01-119-5136
Electrical-Electronic Equipment Chassis

011195136
10065351-101: RNCC: 3 | RNVC: 2
10065351: RNCC: D | RNVC: 9

25 Sep 1981

5975-01-359-1439
Electrical-Electronic Equipment Chassis

013591439
CHA03-12: RNCC: 3 | RNVC: 2

29 May 1992

5975-01-359-6060
Electrical Box Connector

013596060
7228332P003: RNCC: 3 | RNVC: 2

10 Jun 1992

5975-01-360-6838
Electrical Equipment Mounting Base

013606838
4560: RNCC: 3 | RNVC: 2

29 Jun 1992

5975-01-362-4746
Electrical-Electronic Equipment Panel

013624746
921101070-009: RNCC: 3 | RNVC: 9

7 Aug 1992

5975-01-475-5769
Electrical-Electronic Equipment Chassis

014755769
699007001: RNCC: 3 | RNVC: 2
699007001: RNCC: 5 | RNVC: 9
699007001: RNCC: 5 | RNVC: 9

8 Jun 2000

5975-01-476-8856
Cable Marker Sleeve

014768856
013-007382-062: RNCC: 3 | RNVC: 2

25 Jul 2000

5975-01-357-8559
Electrical-Electronic Equipment Chassis

013578559
A3167675-2: RNCC: 3 | RNVC: 2

2 May 1992

5975-01-357-7440
Blank Panel

013577440
1D25956H01: RNCC: 3 | RNVC: 2
1D25956H01: RNCC: 3 | RNVC: 9

30 Apr 1992

5975-01-369-8159
Electrical-Electronic Equipment Panel

013698159
04378-08-001: RNCC: 3 | RNVC: 9

7 Jan 1993

5975-01-372-5141
Electrical Conduit Ferrule

013725141
2-745129-3: RNCC: 3 | RNVC: 2
A08046: RNCC: 5 | RNVC: 2
2-745129-3: RNCC: 5 | RNVC: 2
2-745129-3: RNCC: 5 | RNVC: 9

11 Mar 1993

5975-01-191-9102
Junction Box

011919102
582193: RNCC: 3 | RNVC: 2
582193: RNCC: 5 | RNVC: 9
582193: RNCC: 5 | RNVC: 9

14 Oct 1984

5975-01-355-6408
Electrical Conduit Coupling

013556408
2924: RNCC: 3 | RNVC: 1
2924: RNCC: 3 | RNVC: 2

20 Mar 1992

5975-01-356-6342
Electrical Components Tie Down Strap

013566342
PLT2S-M120: RNCC: 3 | RNVC: 2
PLT2S-120: RNCC: 5 | RNVC: 9

8 Apr 1992

5975-01-169-6639
Electrical Components Tie Down Strap

011696639
10S300-2-231: RNCC: 3 | RNVC: 9
10S300-2-231: RNCC: C | RNVC: 1

12 Jan 1984

5975-01-188-7460
Electrical Equipment Cabinet

011887460
110D176G1: RNCC: 3 | RNVC: 2

7 Sep 1984

5975-01-508-4123
Wire Strand Hanger

015084123
7-311B25012-1: RNCC: 3 | RNVC: 2
7-311B25012-1: RNCC: 5 | RNVC: 9

20 May 2003

5975-01-507-9472
Electrical Equipment Rack

015079472
515R1: RNCC: 3 | RNVC: 2

8 May 2003

5975-01-508-4989
Electrical-Electronic Equipment Panel

015084989
910149-9: RNCC: 3 | RNVC: 2

22 May 2003

5975-01-419-2061
Electrical-Electronic Equipment Chassis

014192061
C200H-BC051-V2: RNCC: 3 | RNVC: 2

15 Sep 1995

5975-01-443-3056
Electrical Equipment Mounting Base

014433056
E4469A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-443-3050
Blank Panel

014433050
40105A: RNCC: 3 | RNVC: 2
HP40105A: RNCC: 5 | RNVC: 2
HP40105A: RNCC: 5 | RNVC: 2
40105A: RNCC: 5 | RNVC: 2
40105A: RNCC: 5 | RNVC: 2
HP40105A: RNCC: 5 | RNVC: 9
40105A: RNCC: 5 | RNVC: 9

7 Apr 1997

5975-01-506-2320
Electronic Equipment Mounting Tray

015062320
74A880611-2215: RNCC: 3 | RNVC: 2

25 Mar 2003

5975-01-506-9310
Junction Box Assembly

015069310
1558002-103: RNCC: 3 | RNVC: 2

14 Apr 2003

5975-01-506-5295
Electronic Equipment Mounting Tray

015065295
2252663-1: RNCC: 3 | RNVC: 2

1 Apr 2003

5975-01-507-5879
Electrical Equipment Mounting Base

015075879
74A880725-1007: RNCC: 3 | RNVC: 2

1 May 2003

5975-00-813-8659
Electrical Wall Plate

008138659
201: RNCC: 3 | RNVC: 2
70-1578: RNCC: 5 | RNVC: 9

23 Apr 1972

5975-01-439-7575
Electrical-Electronic Equipment Panel

014397575
5223877-9: RNCC: 3 | RNVC: 2

18 Dec 1996

5975-01-375-2781
Electrical-Electronic Equipment Panel

013752781
68711-001: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-9672
Electrical-Electronic Equipment Panel

013759672
30977-7: RNCC: 3 | RNVC: 2

24 May 1993

5975-01-375-2399
Flexible Metal Conduit

013752399
6-1-8771-18: RNCC: 3 | RNVC: 2

7 May 1993

5975-01-375-8007
Dust And Moisture Seal Boot

013758007
629-5512-001: RNCC: 3 | RNVC: 2

21 May 1993

5975-01-501-5776
Electrical Equipment Mounting Base

015015776
11039-1500-01: RNCC: 3 | RNVC: 2

7 Oct 2002

5975-01-505-2443
Cable Shield Adapter

015052443
SEEPA-N-C-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-436-5161
Electrical Standardized Components Case

014365161
317607: RNCC: 3 | RNVC: 2
317607: RNCC: 3 | RNVC: 9
0317607: RNCC: 5 | RNVC: 2
0317607: RNCC: 5 | RNVC: 9

20 Sep 1996

5975-01-435-8085
Electrical Equipment Mounting Base

014358085
622-7705-001: RNCC: 3 | RNVC: 2
16VE293003: RNCC: 7 | RNVC: 2

3 Sep 1996

5975-01-436-5155
Electrical-Electronic Equipment Panel

014365155
3717612: RNCC: 3 | RNVC: 2
3717612: RNCC: 3 | RNVC: 9
3717612: RNCC: 5 | RNVC: 2
3717612: RNCC: 5 | RNVC: 9

20 Sep 1996

5975-01-500-6805
Electrical-Electronic Equipment Chassis

015006805
C008262-01: RNCC: 3 | RNVC: 2

5 Sep 2002

5975-01-501-2601
Electrical Equipment Cabinet Case

015012601
H9C10-TF: RNCC: 3 | RNVC: 2

26 Sep 2002

5975-01-495-1733
Electrical Conduit Coupling

014951733
94F7364: RNCC: 3 | RNVC: 2

8 Mar 2002

5975-01-493-8345
Electrical Equipment Rack

014938345
5099983: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-01-499-8730
Electronic Equipment Mounting Tray

014998730
1580132P01: RNCC: 3 | RNVC: 2

6 Aug 2002

5975-00-686-7605
Blank Panel

006867605
544-3287-004: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-373-9959
Cable Marker Sleeve

013739959
TRSA1014/E/T: RNCC: 3 | RNVC: 2
99046788: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-373-9960
Cable Marker Sleeve

013739960
TRSA1014/E/X: RNCC: 3 | RNVC: 2
99046792: RNCC: 5 | RNVC: 2

14 Apr 1993

5975-01-472-4185
Electrical-Electronic Equipment Panel

014724185
3350996-9: RNCC: 3 | RNVC: 2

2 Mar 2000

5975-01-472-5899
Cable Marker Sleeve

014725899
605B798H11: RNCC: 3 | RNVC: 2
605B798H11: RNCC: 3 | RNVC: 9

9 Mar 2000

5975-01-369-0697
Cable Hanger

013690697
6277718: RNCC: 3 | RNVC: 2

13 Dec 1992

5975-01-369-7348
Electrical Equipment Mounting Base

013697348
7334047G1: RNCC: 3 | RNVC: 2

4 Jan 1993

5975-01-369-5047
Electrical-Electronic Equipment Chassis

013695047
DAA3383A487-105: RNCC: 3 | RNVC: 2

24 Dec 1992

5975-01-371-2803
Electrical Bonding Ring

013712803
TR12BI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
91650831: RNCC: 5 | RNVC: 2
TR12BI: RNCC: 5 | RNVC: 9

10 Feb 1993

5975-01-468-9234
Flexible Metal Conduit Assembly

014689234
254721: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-01-468-9203
Flexible Metal Conduit Assembly

014689203
200180-0009: RNCC: 3 | RNVC: 2

27 Oct 1999

5975-00-773-6208
Guy Adapter

007736208
B3311-342: RNCC: 3 | RNVC: 2
SMB131891: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-01-367-0495
Electrical-Electronic Equipment Chassis

013670495
115157-02: RNCC: 3 | RNVC: 2
115157-02: RNCC: 5 | RNVC: 9

25 Apr 1996

5975-01-486-1705
Electrical Equipment Rack

014861705
659442: RNCC: 3 | RNVC: 2

20 Jun 2001

5975-01-485-5498
Electrical Equipment Rack

014855498
11467386: RNCC: 3 | RNVC: 2

30 May 2001

5975-01-485-8806
Cable Marker Sleeve

014858806
651693: RNCC: 3 | RNVC: 2

11 Jun 2001

5975-01-487-5487
Electrical Conduit Coupling

014875487
1375-15-0015: RNCC: 3 | RNVC: 2
G95953: RNCC: D | RNVC: 9

9 Aug 2001

5975-01-484-4992
Cable Marker Sleeve

014844992
2540806-15: RNCC: 3 | RNVC: 2
2540806-15: RNCC: 5 | RNVC: 9

30 Apr 2001

5975-01-337-2264
Electrical-Electronic Equipment Chassis

013372264
530375: RNCC: 3 | RNVC: 2

11 Apr 1991

5975-01-338-0940
Electrical Box Connector

013380940
340: RNCC: 3 | RNVC: 2

26 Apr 1991

5975-01-339-2519
Cable Marker Sleeve

013392519
651043-27: RNCC: 3 | RNVC: 2

19 May 1991

5975-01-338-9486
Electrical-Electronic Equipment Chassis

013389486
A3167-1: RNCC: 3 | RNVC: 9
A3167-1: RNCC: C | RNVC: 1

14 May 1991

5975-01-336-7376
Strain Electrical Conductor Clamp

013367376
937832-101: RNCC: 3 | RNVC: 2

3 Apr 1991

5975-01-478-5820
Interconnecting Box

014785820
KD84415-001: RNCC: 3 | RNVC: 2

19 Sep 2000

5975-01-478-7321
Electrical-Electronic Equipment Chassis

014787321
16U74325-11: RNCC: 3 | RNVC: 2

25 Sep 2000

5975-01-478-5511
Interconnecting Box

014785511
KD84420-001: RNCC: 3 | RNVC: 2

18 Sep 2000

5975-01-480-7702
Electrical Tie Down Mounting Base

014807702
204FB15007-1: RNCC: 3 | RNVC: 9

5 Dec 2000

5975-01-459-2258
Towe Conversion Kit

014592258
149068-B21: RNCC: 3 | RNVC: 2

24 Sep 1998

5975-01-335-6579
Junction Box

013356579
86421598-1: RNCC: 3 | RNVC: 2

12 Mar 1991

5975-01-335-1964
Blank Panel

013351964
C3892: RNCC: 3 | RNVC: 2

6 Mar 1991

5975-01-450-2698
Blank Panel

014502698
11473382: RNCC: 3 | RNVC: 2

31 Oct 1997

5975-01-455-4452
Electrical Tie Down Mounting Base

014554452
9D0271-102: RNCC: 3 | RNVC: 2
CB4020V3N8: RNCC: 3 | RNVC: 2

4 May 1998

5975-01-450-9420
Electrical Fitting Mounting Base

014509420
098052-004: RNCC: 3 | RNVC: 2
AV99-808PC41: RNCC: 5 | RNVC: 2

26 Nov 1997

5975-01-452-0552
Electrical Equipment Cabinet

014520552
62828-90340: RNCC: 3 | RNVC: 2

14 Jan 1998

5975-01-452-1887
Electrical Equipment Mounting Base

014521887
10253246-19: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-457-7678
Rigid Metal Conduit Assembly

014577678
226480-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-503: RNCC: 7 | RNVC: 2

3 Aug 1998

5975-01-455-1072
Electrical Equipment Rack

014551072
A3312A: RNCC: 3 | RNVC: 2

22 Apr 1998

5975-00-764-9958
Electrical Equipment Mounting Base

007649958
123SME50065-1: RNCC: 3 | RNVC: 2
123SME50065-1: RNCC: 5 | RNVC: 9

7 Apr 1972

5975-01-330-4426
Electrical Components Tie Down Strap

013304426
SST2-0: RNCC: 3 | RNVC: 2
91301085: RNCC: 5 | RNVC: 2

4 Dec 1990

5975-01-332-5260
Electrical Equipment Mounting Base

013325260
481D010-1: RNCC: 3 | RNVC: 2

11 Jan 1991

5975-01-332-6382
Electrical Equipment Mounting Base

013326382
071-4003-03: RNCC: 3 | RNVC: 2

14 Jan 1991

5975-01-332-6360
Electrical Conduit Nipple

013326360
T1-1006-01: RNCC: 3 | RNVC: 2

14 Jan 1991

5975-01-445-0500
Flexible Metal Conduit

014450500
1310-0101-43: RNCC: 3 | RNVC: 2
1310-0101-43: RNCC: 5 | RNVC: 9
1310-0101-43: RNCC: C | RNVC: 1
1310-0101: RNCC: D | RNVC: 9

22 May 1997

5975-01-446-1240
Electrical-Electronic Equipment Panel

014461240
H8183: RNCC: 3 | RNVC: 2
H8183: RNCC: 3 | RNVC: 9
H8183: RNCC: 5 | RNVC: 2

23 Jun 1997

5975-01-106-9804
Electrical Components Tie Down Strap

011069804
PLT4S: RNCC: 3 | RNVC: 2

28 Jan 1981

5975-01-505-2448
Cable Shield Adapter

015052448
SEEPA-SPN250-S-A: RNCC: 3 | RNVC: 2

27 Feb 2003

5975-01-504-9120
Electronic Equipment Mounting Tray

015049120
261414-1: RNCC: 3 | RNVC: 2

13 Feb 2003

5975-22-624-8245
Electrical Equipment Rack

226248245
10 88 009 734: RNCC: 3 | RNVC: 2
NSYOPB15U5F: RNCC: 3 | RNVC: 2
1088009734: RNCC: 5 | RNVC: 2
3606480169861: RNCC: 5 | RNVC: 9

21 Jan 2013

5975-15-211-9600
Raccordo Guaina-Sca

152119600
RAMG32: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-13-120-4759
Flexible Metal Conduit Assembly

131204759
4071.08.890: RNCC: 3 | RNVC: 2

19 Nov 2008

5975-99-427-1224
Electrical Nonmetallic Conduit Assembly

994271224
BA50993: RNCC: 3 | RNVC: 2
36VV3830: RNCC: 6 | RNVC: 9
36VV3830: RNCC: 6 | RNVC: 9

31 Oct 1979

5975-99-426-9054
Identificati Sleeve

994269054
BA64291: RNCC: 3 | RNVC: 2
36VV17421: RNCC: 6 | RNVC: 9

23 Oct 1979

5975-15-142-5396
Staffa

151425396
144125: RNCC: 3 | RNVC: 2

9 Jun 1997

5975-12-387-6876
Electrical-Electronic Equipment Panel

123876876
GE5012G064: RNCC: 3 | RNVC: 2

24 Jan 2012

5975-14-255-3192

5975-12-317-2098
Elekt Gehaeuseteil

123172098
3555520: RNCC: 3 | RNVC: 2
355.5520: RNCC: 5 | RNVC: 2

17 Mar 1989

5975-01-297-1348
Junction Box

012971348
DAA3222D827-021: RNCC: 3 | RNVC: 2

29 Mar 1989

5975-01-500-5621
Electrical-Electronic Equipment Chassis

015005621
NXS-MHS: RNCC: 3 | RNVC: 2

30 Aug 2002

5975-01-500-3195
Electrical-Electronic Equipment Panel

015003195
506A0261-02: RNCC: 3 | RNVC: 2
506A0261-02: RNCC: 5 | RNVC: 2
506A0261-02: RNCC: 5 | RNVC: 9

21 Aug 2002

5975-14-293-1518

5975-14-299-1260

5975-14-205-5802

5975-23-113-1030
Female Socket

231131030
190003499733: RNCC: 3 | RNVC: 2

3 May 1999

5975-13-117-6885
Cable Marker Sleeve

131176885
1124745A30: RNCC: 3 | RNVC: 2

4 Apr 2000

5975-37-525-4811
Blank Panel

375254811
91046186: RNCC: 3 | RNVC: 2
91046186: RNCC: 5 | RNVC: 2

31 Jan 2013

5975-99-527-2916
Cable Marker Sleeve

995272916
BS3858: RNCC: 4 | RNVC: 1

25 Apr 1991

5975-99-665-0682
Cover Assembly

996650682
1058-1352A: RNCC: 3 | RNVC: 2
97H065V: RNCC: 6 | RNVC: 9

11 Jun 1997

5975-99-897-4700
Electrical Equipment Mounting Base

998974700
80022491: RNCC: 3 | RNVC: 2

19 Aug 2011

5975-14-293-2716

5975-66-129-1343
Flexible Nonmetallic Conduit

661291343
CC2020: RNCC: 3 | RNVC: 1

1 Sep 1987

5975-37-512-4341
Rear Cover Assembly

375124341
AD50001523: RNCC: 3 | RNVC: 2
AD50001523: RNCC: 5 | RNVC: 2

19 Aug 2005

5975-66-122-9509
Plastic Case

661229509
62202: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

30 Jun 1985

5975-14-217-2801

5975-99-438-4860
Rigid Metal Conduit

994384860
A1118007: RNCC: 3 | RNVC: 2
1118007: RNCC: 5 | RNVC: 2
27FR3742: RNCC: 6 | RNVC: 9

5 Oct 1979

5975-17-115-8612
Rigid Nonmetallic Conduit

171158612
L47070644: RNCC: 3 | RNVC: 2

7 Jul 2003

5975-37-501-1620
Electrical Cable Protector

375011620
60701660: RNCC: 3 | RNVC: 2
60701660: RNCC: 5 | RNVC: 2

19 Nov 1988

5975-13-117-6834
Nonmetallic Raceway

131176834
1125102A: RNCC: 3 | RNVC: 2

4 Apr 2000

5975-01-500-0427
Electrical-Electronic Equipment Panel

015000427
GG0130461C001: RNCC: 3 | RNVC: 2

12 Aug 2002

5975-01-497-0452
Electrical-Electronic Equipment Chassis

014970452
775-4281-001: RNCC: 3 | RNVC: 2

7 May 2002

5975-01-661-5097
Electrical Equipment Drawer

016615097
HDW2-F800-DBF.P: RNCC: 3 | RNVC: 9
HDW2-F800-DBF.P: RNCC: 5 | RNVC: 2
HDW2-F800-DBF.P: RNCC: 5 | RNVC: 2

6 Mar 2017

5975-98-205-2516
Junction Box

982052516
56E6: RNCC: 3 | RNVC: 2

3 Sep 1999

5975-01-127-0457
Strain Electrical Conductor Clamp

011270457
4038596: RNCC: 3 | RNVC: 2

22 Feb 1982

5975-01-312-8185
Electrical Equipment Mounting Base

013128185
653-9015-001: RNCC: 3 | RNVC: 2
653-9015-001: RNCC: 5 | RNVC: 2
653-9015-001: RNCC: 5 | RNVC: 2

22 Dec 1989

5975-01-259-5225
Blade

012595225
8000-417J: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-446-8683
Flexible Nonmetallic Conduit

014468683
75A351011-2007: RNCC: 3 | RNVC: 2

18 Jul 1997

5975-01-443-8826
Electrical-Electronic Equipment Panel

014438826
34003-501: RNCC: 3 | RNVC: 2
ASC1489902: RNCC: 5 | RNVC: 9

21 Apr 1997

5975-01-443-3048
Blank Panel

014433048
40106A: RNCC: 3 | RNVC: 2

7 Apr 1997

5975-01-297-9693
Electrical-Electronic Equipment Panel

012979693
35-873: RNCC: 3 | RNVC: 9

8 Apr 1989

5975-01-304-3887
Electrical-Electronic Equipment Chassis

013043887
SY933000: RNCC: 3 | RNVC: 2

18 Jul 1989

5975-01-312-8182
Electrical Equipment Mounting Base

013128182
622-5211-001: RNCC: 3 | RNVC: 2
P01075: RNCC: 3 | RNVC: 2

22 Dec 1989

5975-01-506-6062
Cable Retainer Cover

015066062
11466051: RNCC: 3 | RNVC: 2

3 Apr 2003

5975-01-437-9724
Electrical Cable Support

014379724
1750N02: RNCC: 3 | RNVC: 2
91332204: RNCC: 5 | RNVC: 2
91332204: RNCC: 5 | RNVC: 2

28 Oct 1996

5975-01-441-0496
Electrical Equipment Mounting Base

014410496
10372-0800-01: RNCC: 3 | RNVC: 2

31 Jan 1997

5975-01-110-4985
Reducer Fitting

011104985
112410: RNCC: 3 | RNVC: 9

2 Apr 1981

5975-01-034-5617
Electrical Keyway Plate

010345617
30-5632-4: RNCC: 3 | RNVC: 2

27 Jan 1977

5975-01-441-4012
Electrical-Electronic Equipment Chassis

014414012
E4001: RNCC: 3 | RNVC: 2

11 Feb 1997

5975-01-447-8887
Electrical-Electronic Equipment Panel

014478887
77-104864-01: RNCC: 3 | RNVC: 2
77-104864-01: RNCC: 5 | RNVC: 9

15 Aug 1997

5975-01-469-8360
Electrical-Electronic Equipment Chassis

014698360
7522-34H: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-449-1798
Electronic Equipment Mounting Tray

014491798
501887-003: RNCC: 3 | RNVC: 2

22 Sep 1997

5975-01-661-3339
Electrical Equipment Cabinet

016613339
X00246: RNCC: 3 | RNVC: 2

28 Feb 2017

5975-01-661-4416
Electrical Equipment Cabinet

016614416
AR3357: RNCC: 3 | RNVC: 2

2 Mar 2017

5975-01-676-0732
Electrical Equipment Mounting Base

016760732
011-02419-00: RNCC: 3 | RNVC: 2

11 Oct 2018

5975-01-647-4948
Blank Panel

016474948
304A050-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-647-4949
Blank Panel

016474949
304A030-1: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-679-5362
Electrical-Electronic Equipment Panel

016795362
CB90580-001: RNCC: 3 | RNVC: 2

28 Mar 2019

5975-01-104-5589
Transformer R Guard

011045589
389210-1: RNCC: 3 | RNVC: 2

6 Dec 1980

5975-01-459-6677
Electrical Equipment Mounting Base

014596677
622-7266-001: RNCC: 3 | RNVC: 2
281270: RNCC: 5 | RNVC: 2

9 Oct 1998

5975-01-476-4865
Electrical Conduit Coupling

014764865
905-0054: RNCC: 3 | RNVC: 2

13 Jul 2000

5975-01-464-2800
Flexible Metal Conduit Assembly

014642800
230624-DL0000: RNCC: 3 | RNVC: 2
17B2E2000-535: RNCC: 7 | RNVC: 2

23 Apr 1999

5975-01-132-2999
Electrical-Electronic Equipment Chassis

011322999
11776590: RNCC: 3 | RNVC: 2
60082-244: RNCC: 5 | RNVC: 2

26 May 1982

5975-01-450-2305
Electrical-Electronic Equipment Panel

014502305
11474551-1: RNCC: 3 | RNVC: 2
11474551: RNCC: D | RNVC: 9

30 Oct 1997

5975-01-455-7332
Rigid Metal Conduit

014557332
8330-1: RNCC: 3 | RNVC: 2

13 May 1998

5975-01-517-5113
Electrical-Electronic Equipment Panel

015175113
3351980-61: RNCC: 3 | RNVC: 2

10 Feb 2004

5975-01-258-5682
Blank Panel

012585682
57-00827-001: RNCC: 3 | RNVC: 2

4 Jul 1987

5975-01-258-6766
Electrical Equipment Mounting Base

012586766
071-4025-01: RNCC: 3 | RNVC: 2
Z00.N7788481402TBM: RNCC: 5 | RNVC: 9

6 Jul 1987

5975-01-516-0633
Electrical Equipment Rack

015160633
F825-NFS-11D144-GBE: RNCC: 3 | RNVC: 2

17 Dec 2003

5975-01-516-8964
Electrical-Electronic Equipment Chassis

015168964
7190188-02: RNCC: 3 | RNVC: 2

23 Jan 2004

5975-01-517-0103
Electrical-Electronic Equipment Chassis

015170103
778114-01: RNCC: 3 | RNVC: 2

27 Jan 2004

5975-01-649-7870
Cable Spacer

016497870
3263823: RNCC: 3 | RNVC: 2

10 Nov 2015

5975-01-650-1847
Junction Box

016501847
K10055048-501: RNCC: 3 | RNVC: 2

23 Nov 2015

5975-01-644-0807
Electrical Equipment Rack

016440807
115-01293-00: RNCC: 3 | RNVC: 2

22 Apr 2015

5975-01-080-6643
Conduit Outlet Cover

010806643
WSL: RNCC: 3 | RNVC: 9

31 Jul 1979

5975-01-511-5990
Electrical Conduit Elbow

015115990
900407-8: RNCC: 3 | RNVC: 2

12 Aug 2003

5975-01-513-8356
Electrical Conduit Coupling Nut Clamp

015138356
C336002168: RNCC: 3 | RNVC: 2

7 Oct 2003

5975-01-612-7570
Electrical-Electronic Equipment Panel

016127570
74T081630-1001: RNCC: 3 | RNVC: 2

19 Oct 2012

5975-01-663-6069
Electrical Equipment Rack

016636069
436919-1: RNCC: 3 | RNVC: 2

16 May 2017

5975-01-602-8525
Electrical-Electronic Equipment Panel

016028525
129574-91930: RNCC: 3 | RNVC: 2
129574-91930: RNCC: 3 | RNVC: 9

9 Feb 2012

5975-01-127-0189
Bushing

011270189
516-0023-001: RNCC: 3 | RNVC: 2
450904-7968: RNCC: 5 | RNVC: 2
7117438-79: RNCC: C | RNVC: 1

22 Feb 1982

5975-01-122-9255
Electrical Components Tie Down Strap

011229255
10S300-2-113: RNCC: 3 | RNVC: 9
10S300-2-113: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-263-9116
Junction Box

012639116
218F310: RNCC: 3 | RNVC: 2

22 Sep 1987

5975-01-509-4619
Cable Collar

015094619
KCF-100: RNCC: 3 | RNVC: 2

23 Jun 2003

5975-01-604-5146
Rigid Metal Conduit Assembly

016045146
11472428: RNCC: 3 | RNVC: 2

6 Apr 2012

5975-01-337-7838
Electrical Conduit Tee

013377838
UG-274: RNCC: 2 | RNVC: 2

21 Apr 1991

5975-01-493-7472
Electrical Components Tie Down Strap

014937472
602443: RNCC: 3 | RNVC: 2

16 Jan 2002

5975-01-495-5912
Blank Panel

014955912
0003071: RNCC: 3 | RNVC: 2

20 Mar 2002

5975-01-495-8429
Electrical-Electronic Equipment Chassis

014958429
546-7027-006: RNCC: 3 | RNVC: 2

26 Mar 2002

5975-01-655-6150
Electrical Equipment Mounting Base

016556150
TE-745632-009-001-1A6A1A1: RNCC: 3 | RNVC: 2
TE-745632-009-001-1A6A: RNCC: 5 | RNVC: 9
TE-745632-009-001-1A6A1: RNCC: 7 | RNVC: 2

2 Jun 2016

5975-01-656-6993
Electrical Components Tie Down Strap

016566993
SSPM2.5HP-L300: RNCC: 3 | RNVC: 2
BM000362: RNCC: 5 | RNVC: 2

14 Jul 2016

5975-01-656-2626
Cable Marker Sleeve

016562626
S100X225YIJ: RNCC: 3 | RNVC: 2

23 Jun 2016

5975-01-328-5923
Conduit

013285923
200266-0016: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-330-4239
Electrical Equipment Rack

013304239
0PTI0N60: RNCC: 3 | RNVC: 2
91575886: RNCC: 5 | RNVC: 2

4 Dec 1990

5975-01-332-0361
Junction Box Cover

013320361
3325203: RNCC: 3 | RNVC: 2

2 Jan 1991

5975-01-492-7355
Electrical-Electronic Equipment Chassis

014927355
641R934G01: RNCC: 3 | RNVC: 2

11 Dec 2001

5975-01-492-1510
Electrical Equipment Shelf

014921510
T3KD1930: RNCC: 3 | RNVC: 2
LLKD1930: RNCC: 5 | RNVC: 9
2200089-201: RNCC: 7 | RNVC: 2
2200089: RNCC: D | RNVC: 9

15 Nov 2001

5975-01-105-0288
Electrical Equipment Drawer

011050288
54342-40775: RNCC: 3 | RNVC: 2

15 Dec 1980

5975-01-106-1052
Electrical Equipment Cabinet

011061052
54463-40105: RNCC: 3 | RNVC: 2

13 Jan 1981

5975-01-596-2946
Stuffing Tube Adapter

015962946
M24758/19-24-A: RNCC: 3 | RNVC: 9

13 May 2011

5975-01-491-3029
Electrical Grounding Plate

014913029
17-880F03M00R01: RNCC: 3 | RNVC: 9

17 Oct 2001

5975-99-651-2278

5975-99-652-3047

5975-14-270-8723

5975-99-638-3842
Conduit Box

996383842
05B146: RNCC: 3 | RNVC: 1
F510G: RNCC: 5 | RNVC: 1

25 Apr 1991

5975-01-285-4221
Electrical Conductor Bushing

012854221
11569909-1: RNCC: 3 | RNVC: 2

14 Sep 1988

5975-01-324-1658
Electrical Equipment Mounting Base

013241658
622-8116-001: RNCC: 3 | RNVC: 2
MT-6790/ARC-217 80058(V): RNCC: 5 | RNVC: 2

11 Aug 1990

5975-01-325-8602
Electrical-Electronic Equipment Panel

013258602
208125-101: RNCC: 3 | RNVC: 2

12 Sep 1990

5975-01-487-5495
Electrical Conduit Nipple

014875495
1313-31-0056: RNCC: 3 | RNVC: 2
G95953: RNCC: D | RNVC: 9

9 Aug 2001

5975-01-488-2983
Electrical Conductor Bushing

014882983
640-015NF0103: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-0930
Flexible Metal Conduit Assembly

014880930
5HM40042-111: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-2980
Electrical Conductor Bushing

014882980
640-015NF0102: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-488-0934
Rigid Metal Conduit Assembly

014880934
5HM40049-105: RNCC: 3 | RNVC: 2

23 Aug 2001

5975-01-429-8205
Cable Marker Sleeve

014298205
N13714-050-010: RNCC: 3 | RNVC: 2

19 Apr 1996

5975-01-097-4360
Cable Marker Sleeve

010974360
322367-4: RNCC: 3 | RNVC: 2
322367-4: RNCC: 5 | RNVC: 9
322367-4: RNCC: 8 | RNVC: 2

11 Jul 1980

5975-01-593-3406
Electrical-Electronic Equipment Panel

015933406
9D02365-1: RNCC: 3 | RNVC: 2

6 Apr 2011

5975-01-594-3181
Electrical Components Tie Down Strap

015943181
M90461-19: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0682
Insulator Bracket

015950682
5586201: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-8789
Cable Marker Sleeve

015948789
KTMS501-4(3): RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-0175
Electrical Equipment Cabinet

015950175
281345-7: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-8348
Conduit Outlet Cover

015948348
2527555: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-594-8791
Cable Marker Sleeve

015948791
KTMS501-4(1): RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-2822
Spec Crypto Mount A

015952822
325-3000-001: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-592-7139
Junction Box

015927139
A302410LP: RNCC: 3 | RNVC: 2
HOFA302410LP: RNCC: 5 | RNVC: 9

16 Mar 2011

5975-01-593-3130
Electrical Equipment Drawer

015933130
11465029: RNCC: 3 | RNVC: 2

6 Apr 2011

5975-01-279-6731
Electrical-Electronic Equipment Panel

012796731
458633-02: RNCC: 3 | RNVC: 2
458633-02: RNCC: 3 | RNVC: 9

23 May 1988

5975-01-281-4926
Electrical Equipment Cabinet

012814926
1855V2: RNCC: 3 | RNVC: 9

24 Jun 1988

5975-01-487-0453
Pole Platform

014870453
9810-11-1751-01: RNCC: 3 | RNVC: 2

23 Jul 2001

5975-01-487-6355
Electrical Equipment Rack

014876355
5HK01501-103: RNCC: 3 | RNVC: 2

13 Aug 2001

5975-01-361-8857
Electrical Equipment Mounting Base

013618857
071-4004-01: RNCC: 3 | RNVC: 2

28 Jul 1992

5975-01-362-5553
Electrical-Electronic Equipment Panel

013625553
949391-103: RNCC: 3 | RNVC: 2

9 Aug 1992

5975-01-273-7153
Electrical Equipment Cabinet Case

012737153
3060-1009: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-483-9919
Cable Marker Sleeve

014839919
2540806-67: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-483-9947
Cable Marker Sleeve

014839947
2540806-84: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-485-0401
Blank Panel

014850401
106844302: RNCC: 3 | RNVC: 2

15 May 2001

5975-01-485-7491
Flexible Metal Conduit

014857491
525-11754-1: RNCC: 3 | RNVC: 2
525-11754-1: RNCC: 5 | RNVC: 9

5 Jun 2001

5975-01-486-3009
Cable Marker Sleeve

014863009
651668: RNCC: 3 | RNVC: 2

25 Jun 2001

5975-01-486-5285
Electrical-Electronic Equipment Chassis

014865285
659-9030-001: RNCC: 3 | RNVC: 2

2 Jul 2001

5975-01-484-5461
Cable Marker Sleeve

014845461
2540806-100: RNCC: 3 | RNVC: 2
2540806-100: RNCC: 5 | RNVC: 9

1 May 2001

5975-01-485-4498
Electrical Cable Protector

014854498
132910018: RNCC: 3 | RNVC: 2

29 May 2001

5975-01-487-1718
Blank Panel

014871718
068523: RNCC: 3 | RNVC: 2

26 Jul 2001

5975-01-488-8971
Flexible Metal Conduit Assembly

014888971
5HB71101-105: RNCC: 3 | RNVC: 2

5 Sep 2001

5975-01-491-0845
Electrical Equipment Rack

014910845
MODEL 5020-1: RNCC: 3 | RNVC: 2

12 Oct 2001

5975-01-084-8577
Electrical Nonmetallic Conduit Assembly

010848577
GA159-2428-10MS: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-086-4486
Electrical Components Tie Down Strap

010864486
10S300-2-129: RNCC: 3 | RNVC: 9
10S300-2-129: RNCC: C | RNVC: 1

29 Nov 1979

5975-01-672-3372
Electrical Equipment Mounting Base

016723372
622-8801-002: RNCC: 3 | RNVC: 2

27 Apr 2018

5975-01-688-5021
Electrical-Electronic Equipment Chassis

016885021
PS400-HPCHAS-5-004: RNCC: 3 | RNVC: 2

19 May 2020

5975-01-589-9318
Electrical Equipment Mounting Base

015899318
M123015: RNCC: 3 | RNVC: 2
M123015: RNCC: 3 | RNVC: 9

8 Nov 2010

5975-01-589-0887
Cable Marker Sleeve

015890887
3870441R1: RNCC: 3 | RNVC: 2

18 Oct 2010

5975-01-589-3441
Electrical Components Tie Down Strap

015893441
3711628C1: RNCC: 3 | RNVC: 2

22 Oct 2010

5975-01-591-0689
Mounting Plate

015910689
M093041-102: RNCC: 3 | RNVC: 2
M093041-102: RNCC: 3 | RNVC: 9

10 Jan 2011

5975-01-159-1934
Electrical Box

011591934
025-15009: RNCC: 3 | RNVC: 2

4 Aug 1983

5975-01-481-9728
Blank Panel

014819728
1612465-103: RNCC: 3 | RNVC: 2

1 Feb 2001

5975-01-483-4936
Electronic Equipment Mounting Tray

014834936
70-30578-01: RNCC: 3 | RNVC: 9
74-45555-01: RNCC: 5 | RNVC: 9
74-455555-01: RNCC: 5 | RNVC: 9

29 Mar 2001

5975-01-483-9937
Cable Marker Sleeve

014839937
2540806-69: RNCC: 3 | RNVC: 2

13 Apr 2001

5975-01-694-7438
Junction Box

016947438
ALN314018: RNCC: 3 | RNVC: 2

21 Apr 2021

5975-01-695-7695
Electrical Equipment Rack

016957695
030837-0001: RNCC: 3 | RNVC: 2
502082: RNCC: D | RNVC: 9

23 Jun 2021

5975-01-694-9890
Junction Box

016949890
844E2424-13: RNCC: 3 | RNVC: 2

7 May 2021

5975-01-696-8884
Electrical Equipment Rack Base

016968884
3369335-1: RNCC: 3 | RNVC: 2

23 Aug 2021

5975-01-674-7401
Raceway Cover

016747401
EB3T14A099BB: RNCC: 3 | RNVC: 2
7423228761: RNCC: 5 | RNVC: 2
23228761: RNCC: 5 | RNVC: 2

9 Aug 2018

5975-01-695-8264
Electrical Conduit Union

016958264
STR100B: RNCC: 3 | RNVC: 2

24 Jun 2021

5975-01-696-2831
Electrical Conduit Locknut

016962831
889664: RNCC: 3 | RNVC: 2

20 Jul 2021

5975-01-663-4371
Electrical Equipment Rack

016634371
ASA5506-RACK-MNT=: RNCC: 3 | RNVC: 2

10 May 2017

5975-01-666-6283
Electrical-Electronic Equipment Panel

016666283
LS5301B08A: RNCC: 3 | RNVC: 2

14 Sep 2017

5975-01-565-5866
Electrical-Electronic Equipment Chassis

015655866
GC763AV: RNCC: 3 | RNVC: 2

30 Jul 2008

5975-01-565-7760
Electrical Equipment Mounting Base

015657760
659HN1260: RNCC: 3 | RNVC: 2

6 Aug 2008

5975-01-497-4913
Guide Rail

014974913
TJT703002: RNCC: 3 | RNVC: 2

21 May 2002

5975-01-159-3254
Electrical Box Connector

011593254
CGB-193: RNCC: 3 | RNVC: 2
SS700-6: RNCC: 5 | RNVC: 2
7722330P005: RNCC: 7 | RNVC: 2

6 Aug 1983

5975-01-159-5226
Electrical Box Connector

011595226
131C896H01: RNCC: 3 | RNVC: 2
131C896H01: RNCC: 3 | RNVC: 9

10 Aug 1983

5975-01-478-5819
Interconnecting Box

014785819
KD84350-001: RNCC: 3 | RNVC: 2

19 Sep 2000

5975-01-479-5281
Electrical Equipment Cabinet

014795281
120664-B21: RNCC: 3 | RNVC: 2

24 Oct 2000

5975-01-479-6550
Junction Box

014796550
4HE0112-501: RNCC: 3 | RNVC: 2

26 Oct 2000

5975-01-480-7913
Electrical Box Connector

014807913
T100: RNCC: 3 | RNVC: 2

6 Dec 2000

5975-01-481-0657
Electrical Equipment Mounting Base

014810657
95002A3129: RNCC: 3 | RNVC: 2

15 Dec 2000

5975-01-391-4427
Electrical Nonmetallic Conduit Assembly

013914427
57350-10: RNCC: 3 | RNVC: 2

10 Jun 1994

5975-01-391-7125
Electrical Nonmetallic Conduit Assembly

013917125
57350-18: RNCC: 3 | RNVC: 2

16 Jun 1994

5975-01-391-3477
Electrical Equipment Cabinet

013913477
197580-2: RNCC: 3 | RNVC: 2

9 Jun 1994

5975-01-686-3520
Chassis Base

016863520
RFE23050750-502: RNCC: 3 | RNVC: 2
RFE23050750-501: RNCC: 5 | RNVC: 2
RFE23050750-501: RNCC: 5 | RNVC: 2
RFE23050750-502: RNCC: 5 | RNVC: 2

10 Feb 2020

5975-01-692-2120
Electrical Components Tie Down Strap

016922120
118-00032: RNCC: 3 | RNVC: 2

30 Nov 2020

5975-01-694-0347
Electrical Tie Down Mounting Base

016940347
CS-SBK-S10: RNCC: 3 | RNVC: 2

15 Mar 2021

5975-01-694-6370
Electric Cable Joint Box

016946370
1418JB7: RNCC: 3 | RNVC: 2

14 Apr 2021

5975-01-685-8678
Electrical Equipment Rack

016858678
16E4326-3: RNCC: 3 | RNVC: 2
16E4326-3: RNCC: 5 | RNVC: 2

17 Jan 2020

5975-01-692-9065

19 Jan 2021

5975-01-692-6343

30 Dec 2020

5975-01-684-7420
Label Kit

016847420
7-5M1B24221-900: RNCC: 3 | RNVC: 2

14 Nov 2019

5975-01-696-0751
Junction Box

016960751
237206-0015: RNCC: 3 | RNVC: 2

8 Jul 2021

5975-01-695-7022
Electrical Equipment Drawer

016957022
LCD1U20-04-U8KVM-N-CO: RNCC: 3 | RNVC: 2
LCD1U20-04-8KVM-N-CO: RNCC: 3 | RNVC: 2
32-522412: RNCC: 5 | RNVC: 2

21 Jun 2021

5975-01-696-0345
Mounting Plate

016960345
ER-RMKIT: RNCC: 3 | RNVC: 2

7 Jul 2021

5975-01-696-4393
Electrical Equipment Shelf

016964393
1305MD2417-101: RNCC: 3 | RNVC: 2

27 Jul 2021

5975-01-697-3430
Electrical-Electronic Equipment Chassis

016973430
6906-2310-01: RNCC: 3 | RNVC: 2

15 Sep 2021

Load More Results