What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 195 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 195of 491

5975-14-460-7030
Equipemen Bati/Baie

144607030
CC890036T8T9: RNCC: 3 | RNVC: 2
45057374: RNCC: 5 | RNVC: 2
CC890036T8T9: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-14-460-6356
Equipemen Bati/Baie

144606356
45686357: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-461-0172
Equipemen Bati/Baie

144610172
20787799: RNCC: 3 | RNVC: 9

17 Feb 1993

5975-14-460-7006
Equipemen Bati/Baie

144607006
16962542: RNCC: 3 | RNVC: 2
16962542: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-14-405-8723
Equipemen Bati/Baie

5975-15-212-4228
Dispositivo Mt/Bm

152124228
D446: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-461-1029
Equipemen Bati/Baie

144611029
422311008: RNCC: 3 | RNVC: 2
RAR4709: RNCC: 5 | RNVC: 2
70BA701L0724A: RNCC: 6 | RNVC: 9
70BA701L1085A: RNCC: 6 | RNVC: 9

24 Feb 1993

5975-66-122-4910
Inside/Outsi Elbow

661224910
B4-75X50: RNCC: 3 | RNVC: 2

2 Nov 1984

5975-15-186-0459
Bussola Sc/Sc

151860459
5307011: RNCC: 3 | RNVC: 2

30 Dec 2008

5975-14-460-3727
Equipemen Bati/Baie

144603727
EL125-00: RNCC: 3 | RNVC: 2

21 Jan 1993

5975-14-440-2650
Fonc Chassis/Tiroir

144402650
35-605-700: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-15-230-8642
Pannello 32 Pos.C/I

152308642
183932-1: RNCC: 3 | RNVC: 2
597515E143328: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-99-787-3801
Top Cap 1/4In Indic

997873801
48775-104: RNCC: 3 | RNVC: 2
A10201: RNCC: 5 | RNVC: 2

18 Jun 1986

5975-14-439-6452
Fonc Chassis/Tiroir

144396452
23193037-00: RNCC: 3 | RNVC: 2
23193037-0: RNCC: 5 | RNVC: 2

16 May 1990

5975-15-216-8698
Bussola Sc/St Sinpl

152168698
AMPCO5027803: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-462-1459
Equipemen Bati/Baie

144621459
4653560A: RNCC: 3 | RNVC: 2
62EC021L0643A: RNCC: 6 | RNVC: 9

7 Apr 1993

5975-66-122-4912
Inside/Outsid Elbow

5975-15-139-6787
Basetta Met3 2Po/1S

151396787
920-0211/06: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-436-5292
Equipemen Bati/Baie

5975-15-174-8921
Canala/Pedana Passa

151748921
CC30HD: RNCC: 3 | RNVC: 2

17 Oct 2003

5975-14-439-6467
Fonc Chassis/Tiroir

144396467
23158594-00: RNCC: 3 | RNVC: 2
23158594-3: RNCC: 5 | RNVC: 2

16 May 1990

5975-99-787-6837
Grooved W/S Adaptor

5975-14-461-1363
Equipemen Bati/Baie

144611363
BAUC8218: RNCC: 3 | RNVC: 2

24 Feb 1993

5975-15-209-5516
Tegolino 1/2X18w

152095516
DIS6405-FL1/2X18: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-536-2068
Dc/Dc Converter

145362068
1ULTRA/9375-9000-005X: RNCC: 3 | RNVC: 2

27 May 2004

5975-14-440-2654
Fonc Chassis/Tiroir

144402654
35-605-102: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-451-7665
Equipemen Bati/Baie

5975-14-460-6346
Equipemen Bati/Baie

144606346
45686901: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-461-0170
Equipemen Bati/Baie

144610170
20787779: RNCC: 3 | RNVC: 9

17 Feb 1993

5975-14-459-4240
Equipemen Bati/Baie

144594240
103A103430A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-14-409-5650
Equipemen Bati/Baie

5975-15-139-9627
Raccordo Tubo/Casse

151399627
GW50416: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-042-9383
Fonc Chassis/Tiroir

140429383
22094671: RNCC: 3 | RNVC: 2
WHA730: RNCC: 5 | RNVC: 2
22094671: RNCC: 5 | RNVC: 9

21 Oct 1981

5975-14-459-4248
Equipemen Bati/Baie

144594248
103A103428A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-14-456-4151
Equipemen Bati/Baie

144564151
N745069002J: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-457-0686
Equipemen Bati/Baie

144570686
38018165: RNCC: 3 | RNVC: 2
38018165: RNCC: 5 | RNVC: 9
62TT051L0567A: RNCC: 6 | RNVC: 9

6 Aug 1992

5975-99-902-1649
Arm-Retaining L/H

999021649
FV2081171: RNCC: 3 | RNVC: 2
FV2081171: RNCC: 5 | RNVC: 2

30 May 1992

5975-14-439-6460
Fonc Chassis/Tiroir

144396460
23158595-00: RNCC: 3 | RNVC: 2
23158595-6: RNCC: 5 | RNVC: 2

16 May 1990

5975-14-527-2543
Equipemen Bati/Baie

5975-15-212-5935
Cast. A Bin. C/Lamp

152125935
FOS500116: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-15-231-8197
Angolo Interno/Este

152318197
30211: RNCC: 3 | RNVC: 2
597515E069963: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-15-209-9025
Prolunga Svga M/F D

152099025
PROL2M: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-15-219-7194
Angolo Int/Est X Mi

152197194
LEG646260: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-439-6469
Fonc Chassis/Tiroir

144396469
23158597-00: RNCC: 3 | RNVC: 2
23158597-7: RNCC: 5 | RNVC: 2

16 May 1990

5975-99-527-1644
Radio/Data Ter Rack

5975-15-237-5275
Raccordo Tubo/Guain

152375275
597515E059974: RNCC: 5 | RNVC: 9

27 Aug 2007

5975-15-209-5514
Tubo Pvc/Rac 16 Tu-

152095514
RMG20/16: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-15-209-5515
Tubo Pvc/Rac20 Tu-G

152095515
RMG20/20: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-460-6307
Equipemen Bati/Baie

144606307
45686469: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-439-6463
Fonc Chassis/Tiroir

144396463
23158901-00: RNCC: 3 | RNVC: 2
23158901-6: RNCC: 5 | RNVC: 2

16 May 1990

5975-99-700-9198
Cable Carrier/Riser

997009198
NPPO DAS5000-ITEM5259: RNCC: 2 | RNVC: 2
5000/5259: RNCC: 5 | RNVC: 2
NPPO DAS5000/5259: RNCC: 5 | RNVC: 2

17 Feb 2005

5975-15-217-3275
Tassello C/Vite Da

152173275
SX6S: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-15-211-8298
Canala 40/2X17

152118298
09603: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-443-7212
Fonc Chassis/Tiroir

144437212
20293041: RNCC: 3 | RNVC: 2
20293041: RNCC: 5 | RNVC: 9

5 Dec 1990

5975-15-000-1622
Muffola Cont I/E St

150001622
FQ100068185: RNCC: 3 | RNVC: 2
2007040: RNCC: 5 | RNVC: 2

4 Feb 2013

5975-14-460-6345
Equipemen Bati/Baie

144606345
45681899: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-460-6368
Equipemen Bati/Baie

144606368
45686440: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-15-189-8861
Carica/Scarica Batt

151898861
470447: RNCC: 3 | RNVC: 2

1 Mar 2010

5975-15-167-5582
Placche Ticino 503/

151675582
50311B: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-15-189-8944
Idrobox Magic/Matix

151898944
BTI24502: RNCC: 3 | RNVC: 2

1 Mar 2010

5975-14-459-4247
Equipemen Bati/Baie

144594247
106A102810A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-14-409-5652
Equipemen Bati/Baie

5975-15-211-8129
Quadro Elektron Ek/

152118129
EKDN6HP10: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-15-178-9803
Ups W/S Breaker Ass

151789803
ESBUPS BREAKER4: RNCC: 3 | RNVC: 2

10 Mar 2006

5975-99-787-6836
Grooved W/S Adaptor

997876836
B75385: RNCC: 1 | RNVC: 2
201M914-19A: RNCC: 3 | RNVC: 1
39IZ: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-14-460-6359
Equipemen Bati/Baie

144606359
45686437: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-17-108-2459
V/Dra Nylon T-Strap

171082459
0900554: RNCC: 3 | RNVC: 2
T-STRAP,V/DRAAGTAS POFO MX-1000: RNCC: 5 | RNVC: 2

28 Jun 1994

5975-14-460-6409
Equipemen Bati/Baie

144606409
45686667: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-99-787-6834
Grooved W/S Adaptor

997876834
B75382: RNCC: 1 | RNVC: 2
201M908-19A: RNCC: 3 | RNVC: 1
39IZ: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-99-787-6838
Grooved W/S Adaptor

997876838
B82710: RNCC: 1 | RNVC: 2
228M714-19A: RNCC: 3 | RNVC: 1
39IZ: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-14-380-0204
Equipemen Bati/Baie

5975-14-439-6454
Fonc Chassis/Tiroir

144396454
23178072-5: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-462-1454
Equipemen Bati/Baie

144621454
4653559A: RNCC: 3 | RNVC: 2
62RR039E35164: RNCC: 6 | RNVC: 9

7 Apr 1993

5975-14-439-6456
Fonc Chassis/Tiroir

144396456
23178494-7: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-439-6449
Fonc Chassis/Tiroir

144396449
23178497-1: RNCC: 3 | RNVC: 2

16 May 1990

5975-15-237-5277
Raccordo Tubo/Guain

152375277
81498: RNCC: 3 | RNVC: 2
597515E059976: RNCC: 5 | RNVC: 9

27 Aug 2007

5975-25-143-2660
Skjoetehode M/Holde

5975-14-453-7684
Verrou 1/4 Tour

144537684
R03093-04-1100: RNCC: 3 | RNVC: 2

5 Mar 1992

5975-14-440-2651
Fonc Chassis/Tiroir

144402651
35-605-600: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-456-6611
Equipemen Bati/Baie

144566611
BA14007: RNCC: 3 | RNVC: 9

18 Jul 1992

5975-14-461-0171
Equipemen Bati/Baie

144610171
20787785: RNCC: 3 | RNVC: 9

17 Feb 1993

5975-15-167-5658
Placca/Supporto 3 P

151675658
TC13803: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-14-042-9494
Equipemen Bati/Baie

5975-14-439-6464
Fonc Chassis/Tiroir

144396464
23178491-8: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-459-2052
Equipemen Bati/Baie

144592052
1026-1064-A: RNCC: 3 | RNVC: 2
1026-1064-A: RNCC: 5 | RNVC: 9

19 Nov 1992

5975-14-439-6451
Fonc Chassis/Tiroir

144396451
23157378-00: RNCC: 3 | RNVC: 2
23157378-2: RNCC: 5 | RNVC: 2

16 May 1990

5975-14-460-6367
Equipemen Bati/Baie

144606367
45686356: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-439-6455
Fonc Chassis/Tiroir

144396455
23178062-1: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-439-6446
Fonc Chassis/Tiroir

144396446
23178877-1: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-459-4243
Equipemen Bati/Baie

144594243
104A102810A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-15-216-8696
Bussola St/St Multi

152168696
AMPCO5013811: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-460-7026
Equipemen Bati/Baie

144607026
CC890036T15T16: RNCC: 3 | RNVC: 2
45057325: RNCC: 5 | RNVC: 2
CC890036T15T16: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-14-457-0709
Equipemen Bati/Baie

144570709
38018167: RNCC: 3 | RNVC: 2
38018167: RNCC: 5 | RNVC: 9
62TC026L0580A: RNCC: 6 | RNVC: 9

6 Aug 1992

5975-14-501-6598
220-R/2 Commutation

145016598
45282223: RNCC: 3 | RNVC: 2
45282223: RNCC: 3 | RNVC: 9

5 Nov 1997

5975-25-106-3229
Gyro Junctionbox A/

251063229
NO PRIMARY REF25-106-3229: RNCC: 3 | RNVC: 2
916629C: RNCC: 5 | RNVC: 2

1 Jan 1984

5975-14-449-7602
Verrou 1/4 Tour

144497602
Z00108: RNCC: 3 | RNVC: 2
44026148: RNCC: 3 | RNVC: 2
44026148: RNCC: 5 | RNVC: 9

4 Sep 1991

5975-15-139-9628
Raccorto Tubo/Casse

151399628
GW50417: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-460-3728
Equipemen Bati/Baie

144603728
EL133-00: RNCC: 3 | RNVC: 2

21 Jan 1993

5975-14-460-7028
Equipemen Bati/Baie

144607028
CC890036T6: RNCC: 3 | RNVC: 2
45057348: RNCC: 5 | RNVC: 2
CC890036T6: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-14-461-0169
Equipemen Bati/Baie

144610169
20787777: RNCC: 3 | RNVC: 9

17 Feb 1993

5975-14-461-1373
Equipemen Bati/Baie

144611373
51171740007: RNCC: 3 | RNVC: 2

24 Feb 1993

5975-15-208-0207
Ps Montagerial Ps/E

152080207
4398000: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-459-6401
Equipemen Bati/Baie

144596401
29584431: RNCC: 3 | RNVC: 2

10 Dec 1992

5975-14-520-8382
Cable Masse/Terre

145208382
EARTH RODS: RNCC: 3 | RNVC: 2

14 Jun 2000

5975-14-457-0702
Equipemen Bati/Baie

144570702
38018166: RNCC: 3 | RNVC: 2
38018166: RNCC: 5 | RNVC: 9
62TE001L0574A: RNCC: 6 | RNVC: 9

6 Aug 1992

5975-14-439-6462
Fonc Chassis/Tiroir

144396462
23178059-8: RNCC: 3 | RNVC: 2

16 May 1990

5975-15-209-3877
Vaschette Tipo F/3

152093877
F/3: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-454-6434
Fonc Chassis/Tiroir

144546434
35-659-600G: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-14-439-6453
Fonc Chassis/Tiroir

144396453
23157492-4: RNCC: 3 | RNVC: 2

16 May 1990

5975-15-208-0199
Ps Foot Ve 4 Ps/P

152080199
4612000: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-15-216-8697
Bussola Sc/Sc Duple

152168697
AMPCO5046401: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-15-219-0742
Kit Attrezzi Voce/D

152190742
FT103A: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-15-167-5583
Placche Ticino 503/

151675583
50311X: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-14-439-6458
Fonc Chassis/Tiroir

144396458
23178952-0: RNCC: 3 | RNVC: 2

16 May 1990

5975-15-186-6721
Curva Apribile 1 1/

151866721
ELFLBH5: RNCC: 3 | RNVC: 2

30 Dec 2008

5975-15-167-5584
Placche Ticino 503/

151675584
TC50311X: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-99-788-1276
Grooved W/S Adaptor

997881276
B75384: RNCC: 1 | RNVC: 2
201M912-19A: RNCC: 3 | RNVC: 1
39IZ: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-14-454-6435
Fonc Chassis/Tiroir

144546435
35-605-600A: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-15-237-5276
Raccordo Tubo/Guain

152375276
81497: RNCC: 3 | RNVC: 2
597515E059975: RNCC: 5 | RNVC: 9

27 Aug 2007

5975-14-461-3473
Equipemen Bati/Baie

144613473
29553745: RNCC: 3 | RNVC: 2

9 Mar 1993

5975-14-460-7027
Equipemen Bati/Baie

144607027
CC890036T12T13: RNCC: 3 | RNVC: 2
45057327: RNCC: 5 | RNVC: 2
CC890036T12T13: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-14-440-2652
Fonc Chassis/Tiroir

144402652
35-605-400: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-15-219-7324
Led 230/100V 1W Emi

152197324
GEWGW30947: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-439-6468
Fonc Chassis/Tiroir

144396468
23157435-00: RNCC: 3 | RNVC: 2
23157435-4: RNCC: 5 | RNVC: 2

16 May 1990

5975-14-447-0580
Fonc Chassis/Tiroir

144470580
44026187: RNCC: 3 | RNVC: 2
BGA-M698: RNCC: 5 | RNVC: 2
BGA-M698: RNCC: 5 | RNVC: 9
44026187: RNCC: 5 | RNVC: 9

25 Apr 1991

5975-14-460-6308
Equipemen Bati/Baie

144606308
45686470: RNCC: 3 | RNVC: 2
RS-WAT001: RNCC: 5 | RNVC: 2

4 Feb 1993

5975-14-461-0168
Equipemen Bati/Baie

144610168
20787775: RNCC: 3 | RNVC: 9

17 Feb 1993

5975-15-210-2636
Raccordo Tubo/Scato

152102636
RST20: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-393-6822
Fonc Chassis/Tiroir

143936822
16474970: RNCC: 3 | RNVC: 2
16474970: RNCC: 3 | RNVC: 9

7 Jun 1984

5975-14-439-6459
Fonc Chassis/Tiroir

144396459
23193038-00: RNCC: 3 | RNVC: 2
23193038-3: RNCC: 5 | RNVC: 2

16 May 1990

5975-00-009-2724
Electrical Equipment Mounting Base

000092724
35-29409-1: RNCC: 3 | RNVC: 2

29 Jul 1972

5975-00-065-4024
Elect Conduct Clamp

000654024
J0555: RNCC: 3 | RNVC: 2
709-0019-02: RNCC: 5 | RNVC: 2
709-0019-02: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-008-4660
Electrical-Electronic Equipment Chassis

000084660
546-6522-005: RNCC: 3 | RNVC: 2

21 Jul 1972

5975-00-245-1689
Conduit Outlet

002451689
C17: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-232-7641
Conduit Outlet

002327641
9008: RNCC: 3 | RNVC: 2
LB17: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
57141: RNCC: 5 | RNVC: 2
B4587-2: RNCC: 5 | RNVC: 2
B4587-2: RNCC: 5 | RNVC: 9
6-1-733-1-64A: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-280-7772
Electrical Box Connector

002807772
275: RNCC: 3 | RNVC: 2
7385: RNCC: 5 | RNVC: 2
SP6197: RNCC: 5 | RNVC: 2
2206: RNCC: 5 | RNVC: 2
XC495: RNCC: 5 | RNVC: 2
2006: RNCC: 5 | RNVC: 2
741: RNCC: 5 | RNVC: 2
AC-150: RNCC: 5 | RNVC: 9
809: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-9258
Conduit Outlet

002849258
T17: RNCC: 3 | RNVC: 1
8485194: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
R15T: RNCC: 5 | RNVC: 1
T351: RNCC: 5 | RNVC: 1
7156-5: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-581-4110
Electrical Conduit Elbow

1 Jan 1963

5975-00-681-4021
Conduit Outlet

006814021
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-665-0113
Electrical Box Connector

006650113
WF406: RNCC: 4 | RNVC: 1
FEDSTD157: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-885-5536
Strain Electrical Conductor Clamp

008855536
5412: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-903-6257
Electrical Conduit Elbow

009036257
74-104: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-873-1582
Back Clamp

008731582
27155: RNCC: 3 | RNVC: 2
4631: RNCC: 5 | RNVC: 2
136: RNCC: 5 | RNVC: 2
146: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-872-0763
Tension E Inserts

008720763
424: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-01-207-9532
Electrical Equipment Rack

012079532
815909-4: RNCC: 3 | RNVC: 9
CY-8384(V)2/G: RNCC: 5 | RNVC: 2
0N329367-4: RNCC: 7 | RNVC: 2

8 May 1985

5975-01-536-3668
Electrical-Electronic Equipment Chassis

015363668
115170-100: RNCC: 3 | RNVC: 9
115170-100: RNCC: C | RNVC: 1

30 Dec 2005

5975-01-460-9807
Electrical Cable Assembly Protector

014609807
870004: RNCC: 3 | RNVC: 2

23 Nov 1998

5975-01-600-0889
Electrical Components Tie Down Strap

016000889
AL-07-50-0-C: RNCC: 3 | RNVC: 2

8 Nov 2011

5975-01-598-7032
Hard Drive Rail Mount Kit

015987032
WC966: RNCC: 3 | RNVC: 9

22 Aug 2011

5975-01-586-5952
Electrical Equipment Cabinet

015865952
PTRK-21MDK: RNCC: 3 | RNVC: 9

6 Jul 2010

5975-01-586-5930
Electrical Equipment Rack

015865930
S12D-PS: RNCC: 3 | RNVC: 9

6 Jul 2010

5975-01-521-2862
Electrical Equipment Rack

015212862
U2: RNCC: 3 | RNVC: 9

16 Jun 2004

5975-00-988-9817
Electrical Box Connector

009889817
20769: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-038-2313
Electrical Conduit Union

000382313
678: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-947-1393
Strap Supporting

009471393
1130-1A: RNCC: 3 | RNVC: 2

18 Mar 1966

5975-01-034-2948
Electrical Components Tie Down Strap

010342948
TY527M: RNCC: 3 | RNVC: 2
PLT4H-L: RNCC: 5 | RNVC: 2

22 Jan 1977

5975-00-762-6524
Electrical Wall Plate

007626524
3780: RNCC: 3 | RNVC: 9
13208E8541: RNCC: 7 | RNVC: 2

14 Apr 1972

5975-00-008-5772
Electrical Equipment Cabinet

000085772
123SCAV5129-5: RNCC: 1 | RNVC: 3
547754-102: RNCC: 3 | RNVC: 3
547754-101: RNCC: 5 | RNVC: 9
123SCAV5129-1: RNCC: 5 | RNVC: 9

21 Jul 1972

5975-01-463-5727
Electrical Wall Plate

014635727
DH5866R: RNCC: 3 | RNVC: 2

26 Mar 1999

5975-00-016-9774
Fanning Strip

000169774
P203867-15: RNCC: 3 | RNVC: 2

20 Apr 1967

5975-00-200-2002
Plastic Entrance Cap

002002002
P958F: RNCC: 3 | RNVC: 9

23 Mar 1973

5975-00-215-3810
Conduit Outlet Cover

002153810
170F: RNCC: 3 | RNVC: 2
8020635: RNCC: 5 | RNVC: 2
170F: RNCC: 5 | RNVC: 2
K50-CM: RNCC: 5 | RNVC: 2
BC-50: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-067-9134
Electrical Equipment Cabinet

010679134
4251: RNCC: 3 | RNVC: 2
LE4251: RNCC: 5 | RNVC: 2

10 Nov 1978

5975-00-001-9244
Cord Grip

000019244
SC-D-539895-1: RNCC: 3 | RNVC: 2
BC-2929B-5: RNCC: 5 | RNVC: 1
KS-4502: RNCC: 5 | RNVC: 1

29 Sep 1972

5975-00-079-8251
Electrical Conduit End Seal Disk

000798251
816: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-644-3683
Electrical Conduit Tee

006443683
5323996: RNCC: 3 | RNVC: 2
5276642: RNCC: 3 | RNVC: 2
5276642: RNCC: 3 | RNVC: 2
GAN14042: RNCC: 5 | RNVC: 9
GAN14042: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-019-3169
Electrical Equipment Mounting Base

000193169
SMC660794: RNCC: 3 | RNVC: 2
MK1140UIH6V: RNCC: 5 | RNVC: 2

17 Apr 1968

5975-01-574-4507
Electrical-Electronic Equipment Chassis

015744507
EC-1040GB/ACE-832AP: RNCC: 3 | RNVC: 9

28 May 2009

5975-01-564-2371
Cable Terminal Chamber

015642371
24831-ZW5-U01: RNCC: 3 | RNVC: 9

10 Jun 2008

5975-00-962-9884
Electrical Conduit Bushing

009629884
PB1: RNCC: 3 | RNVC: 2
A50: RNCC: 3 | RNVC: 2
4564586-1: RNCC: 5 | RNVC: 2
D4080-8-8: RNCC: 5 | RNVC: 9
4564586-1: RNCC: 5 | RNVC: 9
IB50: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-01-688-5835
Electrical-Electronic Equipment Panel

016885835
410114163: RNCC: 3 | RNVC: 2

20 May 2020

5975-01-053-8308
Conduit Outlet

010538308
EFCOR10-123: RNCC: 3 | RNVC: 9

11 Jan 1978

5975-01-111-5541
Electrical Box Connector

011115541
1188: RNCC: 3 | RNVC: 2

19 Apr 1981

5975-00-019-4024
Electrical-Electronic Equipment Chassis

000194024
3318-617: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-018-7143
Electrical Grounding Plate

000187143
G355025: RNCC: 3 | RNVC: 2
G355025: RNCC: 3 | RNVC: 9
G355025: RNCC: 5 | RNVC: 9

22 Apr 1967

5975-01-633-7079
Electrical Conduit Coupling

016337079
218036940A: RNCC: 3 | RNVC: 2
ACN LE-T40-8169: RNCC: 5 | RNVC: 9

2 Dec 2014

5975-01-574-7938
Junction Box Assembly

015747938
277W1710-503: RNCC: 3 | RNVC: 2

10 Jun 2009

5975-01-562-4927
Electrical-Electronic Equipment Chassis

015624927
XD000611: RNCC: 3 | RNVC: 2
9002: RNCC: 5 | RNVC: 9

9 Apr 2008

5975-01-111-5539
Electrical Box Connector

011115539
1186: RNCC: 3 | RNVC: 2

19 Apr 1981

5975-01-099-4207
Electrical Conduit Sealing Fitting

010994207
EY-2: RNCC: 3 | RNVC: 2

19 Aug 1980

5975-01-673-6724
Cable Spacer

016736724
24832-ZW5-U01: RNCC: 3 | RNVC: 9

21 Jun 2018

5975-01-682-3504
Electrical Tie Down Mounting Base

016823504
UTB-A2-14: RNCC: 3 | RNVC: 9

2 Aug 2019

5975-01-693-9881
Electrical Equipment Rack

016939881
0G118R: RNCC: 3 | RNVC: 9

12 Mar 2021

5975-01-697-4207
Electrical-Electronic Equipment Chassis

016974207
11071-0908-02: RNCC: 3 | RNVC: 2

20 Sep 2021

5975-01-203-0014
Stuffing Tube

012030014
G1343A2A: RNCC: 3 | RNVC: 2

9 Mar 1985

5975-01-109-3003
Conduit Outlet

011093003
V-10-T: RNCC: 3 | RNVC: 2

12 Mar 1981

5975-01-374-1510
Conduit Outlet

013741510
6-1-9985-5: RNCC: 3 | RNVC: 2

17 Apr 1993

5975-01-559-8014
Electrical-Electronic Equipment Chassis

015598014
OCDH2207: RNCC: 3 | RNVC: 2

7 Jan 2008

5975-01-253-0615
Stuffing Tube

012530615
M19622/14-008: RNCC: 4 | RNVC: 1
MIL-S-19622: RNCC: 5 | RNVC: 1

11 Apr 1987

5975-01-204-1079
Stuffing Tube

012041079
G1343-A-3-B: RNCC: 3 | RNVC: 9

22 Mar 1985

5975-00-519-3049
Conduit Outlet

005193049
FD2-75: RNCC: 3 | RNVC: 2

13 Aug 1974

5975-00-839-7282
Conduit Outlet

008397282
YLB5ANDL450: RNCC: 3 | RNVC: 2
WC586A: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-834-0565
Conduit Outlet

008340565
EABY26S602: RNCC: 3 | RNVC: 2

15 Sep 1967

5975-00-355-4820
Stuffing Tube

003554820
9S5235LREV18SYMB0L1551-14: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-378-1591
Stuffing Tube

003781591
S370-1008-16: RNCC: 3 | RNVC: 2
S370-1008-16: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-485-4253
Stuffing Tube

004854253
402G: RNCC: 3 | RNVC: 9

18 Jun 1974

5975-00-378-8407
Stuffing Tube

003788407
L102-5915-1: RNCC: 3 | RNVC: 2
L102-5915REV6PT1: RNCC: 5 | RNVC: 2
L102-5915-1: RNCC: 5 | RNVC: 9
L102-5915REV6PT1: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-178-0594
Stuffing Tube

001780594
9S5010LALT17TYPE22BSYMB0L1901: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-233-5956
Conduit Outlet

002335956
675630: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-01-105-3309
Stuffing Tube

011053309
3920121-501: RNCC: 3 | RNVC: 2

20 Dec 1980

5975-00-961-2556
Rigid Metal Conduit Assembly

009612556
19393: RNCC: 3 | RNVC: 2
37E501301P102: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-958-6475
Electrical Cable Nipple

009586475
62: RNCC: 3 | RNVC: 1

27 May 1966

5975-01-036-7590
Electrical Components Tie Down Strap

010367590
SSM4S-C: RNCC: 3 | RNVC: 2

5 Mar 1977

5975-01-044-7999
Electrical-Electronic Equipment Chassis

010447999
0N205598: RNCC: 3 | RNVC: 2

21 Jul 1977

5975-00-994-2945
Conduit Outlet

009942945
AJ67: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-963-3784
Condulet

009633784
VDA275: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-968-3317
Rigid Metal Conduit

009683317
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-967-5922
Electrical Conductor Clamp

009675922
88244: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-234-0820
Electrical Equipment Cabinet

002340820
C-1587: RNCC: 3 | RNVC: 1
SFC42GRAYWRINKLE: RNCC: 3 | RNVC: 2

2 Nov 1970

5975-00-246-4347
Electrical Equipment Cabinet

002464347
SM-D-657041: RNCC: 3 | RNVC: 2
4990025: RNCC: 5 | RNVC: 2
CY-6690/TRD-23A: RNCC: 5 | RNVC: 2

14 Feb 1969

5975-15-167-5861
Terminale

151675861
9CD7830A077001: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-16-000-4162
Junction Box

160004162
7QA 157 29: RNCC: 3 | RNVC: 2
55.2524.750.17: RNCC: 5 | RNVC: 2

3 Jan 2001

5975-01-370-4455
Electrical-Electronic Equipment Chassis

013704455
12-055F00M00R12: RNCC: 3 | RNVC: 9

22 Jan 1993

5975-37-527-3271
Electrical-Electronic Equipment Panel

375273271
A50042475: RNCC: 3 | RNVC: 2
A50042475: RNCC: 5 | RNVC: 2

30 Oct 2013

5975-32-069-7276
Cable Marker Sleeve

320697276
H085YWA: RNCC: 3 | RNVC: 2

4 Jun 1997

5975-14-267-8501

5975-12-303-4506
Junction Box

123034506
CF 115 392 CR: RNCC: 3 | RNVC: 2
CF 115 392 CR: RNCC: 5 | RNVC: 2

25 Mar 1985

5975-15-232-6275
Quadro In Vetroresi

152326275
16213: RNCC: 3 | RNVC: 2

19 Jul 2007

5975-14-296-1778

5975-14-318-6118
Serre Conduc Embase

143186118
09029100020: RNCC: 3 | RNVC: 2
90291: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-15-167-5738
Flangia Piana Cieca

151675738
538110: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-13-116-2463
Electrical Equipment Mounting Base

131162463
1124184A: RNCC: 3 | RNVC: 2

6 Nov 1996

5975-19-002-1563
Electrical Equipment Mounting Base

190021563
544021: RNCC: 3 | RNVC: 2

24 Jan 2007

5975-14-248-7892

5975-14-042-7790

5975-12-373-5337
Electrical Equipment Drawer

123735337
5800.8790: RNCC: 3 | RNVC: 2

13 Nov 2007

5975-99-449-1670
11 Wa Pressure Bung

994491670
SR3840: RNCC: 3 | RNVC: 2
5X7254: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-27-047-2081
Baglanti Elemani

270472081
10062532: RNCC: 2 | RNVC: 1
10062532: RNCC: 2 | RNVC: 1

12 Nov 2009

5975-20-004-5917
Electrical Equipment Mounting Base

200045917
726367-901: RNCC: 3 | RNVC: 2

19 Feb 2009

5975-14-241-1553

5975-00-133-0588
Electrical Equipment Cabinet

001330588
0N080103: RNCC: 3 | RNVC: 2

18 Dec 1968

5975-01-512-6240
Junction Box

015126240
BMJB1174: RNCC: 3 | RNVC: 2
BMJB1174: RNCC: 5 | RNVC: 9

5 Sep 2003

5975-01-487-1267
Electrical Equipment Drawer

014871267
709-10-032: RNCC: 3 | RNVC: 9
709-10-032: RNCC: 5 | RNVC: 9

25 Jul 2001

5975-01-548-8869
Electrical Tie Down Mounting Base

015488869
DCA-316-S012-11: RNCC: 3 | RNVC: 9

6 Mar 2007

5975-01-548-8868
Electrical Tie Down Mounting Base

015488868
DCA-308-S012-11: RNCC: 3 | RNVC: 9

6 Mar 2007

5975-01-500-7474
Fanning Strip

015007474
811-2014-00: RNCC: 3 | RNVC: 9

9 Sep 2002

5975-01-613-7185
Electrical-Electronic Equipment Chassis

016137185
13588911: RNCC: 3 | RNVC: 2

15 Nov 2012

5975-00-306-4688
Electrical Equipment Cabinet

003064688
CY4032ASRA34V: RNCC: 3 | RNVC: 2

12 Oct 1973

5975-01-360-6918
Electrical-Electronic Equipment Chassis

013606918
12-041F00M00R01: RNCC: 3 | RNVC: 9

29 Jun 1992

5975-01-360-6916
Electrical-Electronic Equipment Chassis

013606916
12-048F02M00R00: RNCC: 3 | RNVC: 9

29 Jun 1992

5975-00-581-4667
Electrical Box Connector

005814667
CGB599: RNCC: 3 | RNVC: 2
SR-150-1375: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-99-168-7502
Rail Guide.Electric Component Stop

991687502
280-326: RNCC: 3 | RNVC: 2

12 Sep 2012

5975-00-953-8735
Conduit Outlet

009538735
LR448: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
LR48: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-252-7449
Conduit Outlet

002527449
CPS24282: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-472-4031
Conduit Outlet

004724031
LB19: RNCC: 3 | RNVC: 2

10 Jun 1971

5975-01-016-8107
Conduit Outlet

010168107
TB28: RNCC: 3 | RNVC: 2
TB75-M: RNCC: 5 | RNVC: 9
TB28: RNCC: 5 | RNVC: 9
TB75-M: RNCC: C | RNVC: 1

25 Feb 1976

5975-00-174-3560
Conduit Outlet

001743560
S513: RNCC: 3 | RNVC: 2
FSO: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-178-0795
Stuffing Tube

001780795
9S5355LALT7TYPE56SIZEG: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-869-6480
Stuffing Tube

008696480
9S5457L: RNCC: 3 | RNVC: 2
1856234-26: RNCC: 5 | RNVC: 2
1856234-26: RNCC: 5 | RNVC: 9
1856234-26: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-834-0555
Conduit Outlet

008340555
EABT26S602: RNCC: 3 | RNVC: 2

18 Sep 1967

5975-00-839-7280
Conduit Outlet

008397280
YLB3ANDL30: RNCC: 3 | RNVC: 2
RED-DOT ASLB-3: RNCC: 3 | RNVC: 9
W-C-586: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-994-6806
Conduit Outlet

009946806
BLB8: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-523-2275
Stuffing Tube

005232275
67581: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-518-3386
Electrical Components Tie Down Strap

015183386
CV190: RNCC: 3 | RNVC: 2

9 Mar 2004

5975-01-538-1430
Electrical Equipment Shelf

015381430
G750328-1: RNCC: 3 | RNVC: 2

13 Mar 2006

5975-00-009-2725
Electrical Equipment Mounting Base

000092725
35-29409-2: RNCC: 3 | RNVC: 2
35-29409-2: RNCC: 5 | RNVC: 2

29 Jul 1972

5975-01-451-2613
Electrical Equipment Cabinet

014512613
FDSK443: RNCC: 3 | RNVC: 2

10 Dec 1997

5975-01-451-2991
Electrical Equipment Drawer

014512991
35181G: RNCC: 3 | RNVC: 2
35181G: RNCC: 3 | RNVC: 9
35181G: RNCC: 5 | RNVC: 9

11 Dec 1997

5975-01-203-0016
Stuffing Tube

012030016
G1343A4A: RNCC: 3 | RNVC: 2

9 Mar 1985

5975-01-345-6889
Stuffing Tube

013456889
3207B: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-410-6963
Electrical-Electronic Equipment Chassis

014106963
8520001-901: RNCC: 3 | RNVC: 2

9 Mar 1995

5975-01-358-9932
Electrical Conduit Adapter

013589932
710DS004B2216: RNCC: 3 | RNVC: 2

27 May 1992

5975-01-103-3084
Stuffing Tube

011033084
10-113276-141: RNCC: 3 | RNVC: 2

11 Nov 1980

5975-01-484-4872
Electrical Components Tie Down Strap

014844872
MLT1S-CP316: RNCC: 3 | RNVC: 2
MLT1S-CP316: RNCC: 5 | RNVC: 2

30 Apr 2001

5975-01-694-5190
Electrical Equipment Mounting Base

016945190
4038850: RNCC: 3 | RNVC: 2

7 Apr 2021

5975-00-245-1668
Conduit Outlet

002451668
T57: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
487S219: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-488-5035
Electrical-Electronic Equipment Chassis

014885035
709-105-020: RNCC: 3 | RNVC: 9
709-105-020: RNCC: 5 | RNVC: 9

27 Aug 2001

5975-00-296-6085
Electrical Conduit Bushing

002966085
75D: RNCC: 3 | RNVC: 2
RC25: RNCC: 3 | RNVC: 2
EB29106: RNCC: 3 | RNVC: 2
PE8: RNCC: 3 | RNVC: 2
D200: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3342
Junction Box

002803342
500720: RNCC: 2 | RNVC: 2
SP34461: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-284-6416
Electrical Conduit Coupling

002846416
81-0750: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-265-7694
Electrical Wall Plate

002657694
1901: RNCC: 3 | RNVC: 9
491071: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-297-9700
Electrical-Electronic Equipment Panel

012979700
35-AAF: RNCC: 3 | RNVC: 9

8 Apr 1989

5975-12-327-7788
Junction Box

123277788
139588: RNCC: 3 | RNVC: 2
L5419SCHWARZ: RNCC: 3 | RNVC: 9
L5419: RNCC: 5 | RNVC: 2

28 Feb 1992

5975-37-514-1902
Electrical-Electronic Equipment Chassis

375141902
50145375: RNCC: 3 | RNVC: 2
50145375: RNCC: 5 | RNVC: 2

23 Oct 2007

5975-12-356-2432
Kabe Zugentlastung

123562432
PAN6488: RNCC: 3 | RNVC: 2

5 Feb 2002

5975-12-134-8255

5975-14-317-3878
Dust And Moisture Seal Boot

143173878
16041860: RNCC: 3 | RNVC: 2
16041860: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-475-2805
Electrical-Electronic Equipment Panel

144752805
47028645: RNCC: 3 | RNVC: 2

28 Mar 1995

5975-15-201-1766
Electrical Equipment Mounting Base

152011766
N937G60A1001: RNCC: 1 | RNVC: 2
S4747F01: RNCC: 3 | RNVC: 2
(241)A0126N937G60A1001: RNCC: 5 | RNVC: 2

12 Jun 2006

5975-14-535-8316
Cable Terminal Chamber

145358316
46251262: RNCC: 3 | RNVC: 2

25 Jun 2003

5975-27-041-3918
Electrical-Electronic Equipment Panel

270413918
97500251: RNCC: 2 | RNVC: 1

20 May 2008

5975-21-902-6573
Electrical Components Tie Down Strap

219026573
27291: RNCC: 3 | RNVC: 2

16 Jul 1986

5975-33-201-0003
Electrical Equipment Rack

332010003
2510901473: RNCC: 3 | RNVC: 2
2510901473: RNCC: 5 | RNVC: 2

22 Apr 2002

5975-14-406-4025
Term Moyeu Capacite

144064025
1790: RNCC: 3 | RNVC: 2

8 Jan 1986

5975-33-002-0803
Electrical Conduit Adapter

330020803
5275: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-14-431-7761
Electrical-Electronic Equipment Panel

144317761
065027: RNCC: 3 | RNVC: 2

10 May 1989

5975-14-478-1996
Electrical Equipment Drawer

144781996
A31335: RNCC: 3 | RNVC: 2

16 Oct 1995

5975-15-206-7158
Electrical Equipment Rack

152067158
9300176M0014: RNCC: 3 | RNVC: 2
(241)A00699300176M0014: RNCC: 5 | RNVC: 2

6 Jul 2012

5975-14-513-9349
Electrical-Electronic Equipment Panel

145139349
802W280: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-99-873-5896

5975-00-249-5331
Electrical Equipment Cabinet

002495331
A9360C: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-2493
Electrical Equipment Cabinet

002802493
CY-4516B/S: RNCC: 3 | RNVC: 2

12 Aug 1973

5975-00-139-2194
Electrical Equipment Cabinet

001392194
89715500-601A: RNCC: 3 | RNVC: 2

10 Nov 1972

5975-01-249-8393
Electrical Equipment Rack

012498393
0N329367-5: RNCC: 3 | RNVC: 2
CY-8384(V)3/G: RNCC: 5 | RNVC: 2
815909-5: RNCC: 5 | RNVC: 9

19 Feb 1987

5975-01-245-4155
Electrical Equipment Rack

012454155
0N329367-3: RNCC: 3 | RNVC: 2
CY-8384(V)1/G: RNCC: 5 | RNVC: 2
815909-3: RNCC: 5 | RNVC: 9

27 Nov 1986

5975-00-727-6097
Electrical Cable Nipple

007276097
87BLACK: RNCC: 3 | RNVC: 2
531044-2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-728-9814
Cable Strain Relief Bushing

007289814
938: RNCC: 3 | RNVC: 2
938: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-681-4255
Conduit Outlet

006814255
FD12: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-232-7642
Conduit Outlet

002327642
77C718645P003: RNCC: 3 | RNVC: 2
LB37: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
C236549-25: RNCC: 5 | RNVC: 2
C236549-29: RNCC: 5 | RNVC: 2
C236549-3: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-232-7644
Conduit Outlet

002327644
74351A: RNCC: 3 | RNVC: 2
LB57: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-164-2684
Electrical Grounding Plate

001642684
CVC810-6A6: RNCC: 3 | RNVC: 2

31 Jan 1973

5975-00-079-8252
Electrical Conduit End Seal Disk

000798252
817: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-079-8253
Electrical Conduit End Seal Disk

000798253
818: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-209-1355
Conduit Outlet Cover

002091355
DS149: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-197-9575
Electrical Conduit Bushing

001979575
123AL: RNCC: 3 | RNVC: 2

23 Mar 1973

5975-00-284-9257
Conduit Outlet

002849257
FS2: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
FS2: RNCC: 5 | RNVC: 2
FS-52: RNCC: 5 | RNVC: 9
FS-75: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-9303
Electrical Conduit Union

002849303
FEDSTD156: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-01-695-7187
Stuffing Tube

016957187
21668.6: RNCC: 3 | RNVC: 9
21668.6: RNCC: 5 | RNVC: 2

22 Jun 2021

5975-01-687-7121
Electrical Equipment Drawer

016877121
LBX-3: RNCC: 3 | RNVC: 9

14 Apr 2020

5975-00-236-9327
Harness Conduit

002369327
CV21-407164-23: RNCC: 3 | RNVC: 2

20 May 1973

5975-00-240-2738
Conduit Outlet

002402738
B47: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-3524
Conduit Outlet

002803524
FDC1: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-9184
Knockout Reducing Washer

002809184
1455-E: RNCC: 3 | RNVC: 2
3718: RNCC: 3 | RNVC: 2
13414: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-245-1667
Conduit Outlet

002451667
T67: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-056-4384
Electrical Conduit Coupling

000564384
TWCC100: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-879-4501
Conduit Outlet

008794501
FSA3: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-681-0987
Electrical-Electronic Equipment Chassis

006810987
AC411: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-000-0120
Electrical Equipment Mounting Base

000000120
622-2314-001: RNCC: 3 | RNVC: 2

15 Apr 1976

5975-00-003-0566
Switch Terminal Cover

000030566
975461-2: RNCC: 3 | RNVC: 2
975461-2: RNCC: 5 | RNVC: 9

17 May 1972

5975-01-386-0260
Electrical Wall Plate

013860260
7004176: RNCC: 3 | RNVC: 2

26 Jan 1994

5975-01-562-1868
Electronic Equipment Mounting Tray

015621868
8215227: RNCC: 3 | RNVC: 2
UTR1: RNCC: 5 | RNVC: 9

1 Apr 2008

5975-01-553-6436
Conduit Outlet Cover

015536436
SF4: RNCC: 3 | RNVC: 9

20 Jul 2007

5975-01-640-9486
Electrical-Electronic Equipment Chassis

016409486
A3018200: RNCC: 3 | RNVC: 9
SAT2510BU2E: RNCC: 5 | RNVC: 2

5 Jan 2015

5975-01-537-9368
Electrical-Electronic Equipment Chassis

015379368
PAC-53HW/ACE-870A/B: RNCC: 3 | RNVC: 9

3 Mar 2006

5975-00-026-0933
Interconnecting Box

000260933
548-740002-401: RNCC: 3 | RNVC: 2
548-74002-401: RNCC: 3 | RNVC: 2

17 Oct 1972

5975-01-669-8392
Electrical Equipment Rack

016698392
RCS-1824: RNCC: 3 | RNVC: 9

24 Jan 2018

5975-00-578-9759
Electrical Conductor Bushing

005789759
343: RNCC: 3 | RNVC: 2
JHP13-376: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-472-6042
Electrical Box Connector

004726042
1574-26-9: RNCC: 3 | RNVC: 2
268V: RNCC: 3 | RNVC: 2
736: RNCC: 3 | RNVC: 2
066373: RNCC: 3 | RNVC: 2
323V: RNCC: 5 | RNVC: 9
127302029: RNCC: 5 | RNVC: 9
127302029: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-056-1657
Conduit Outlet

000561657
K1: RNCC: 3 | RNVC: 9
K1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-01-543-2999
Electrical Equipment Cabinet

015432999
PTRK-21: RNCC: 3 | RNVC: 9

7 Sep 2006

5975-00-001-5535
Electrical Box Connector

000015535
3305M: RNCC: 3 | RNVC: 2
907T: RNCC: 5 | RNVC: 9
15E2901: RNCC: 5 | RNVC: 9

29 Sep 1972

5975-00-008-7834
Electrical Equipment Rack

000087834
547851-101: RNCC: 3 | RNVC: 9
123SCAV5130-1: RNCC: 5 | RNVC: 9
547851-100: RNCC: 5 | RNVC: 9
123SCAV5130-3: RNCC: 7 | RNVC: 9
123SCAV5130-1: RNCC: C | RNVC: 1
547851-100: RNCC: C | RNVC: 1
547851-101: RNCC: C | RNVC: 1
123SCAV5130-3: RNCC: C | RNVC: 1

1 Sep 1972

5975-00-879-3671
Conduit Outlet Cover

008793671
DS1020G: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-193-7934
Insulator Pin

001937934
71623: RNCC: 3 | RNVC: 2

11 Mar 1970

5975-00-103-2512
Electrical Equipment Drawer

001032512
X99313: RNCC: 3 | RNVC: 9

19 Jun 1968

5975-01-288-8295
Electrical Cable Protector

012888295
4185899-2: RNCC: 3 | RNVC: 2
4185899-2: RNCC: 8 | RNVC: 1

17 Nov 1988

5975-00-032-2321
Electrical Box Connector

000322321
SP6194A: RNCC: 3 | RNVC: 2
WF406: RNCC: 4 | RNVC: 1
7382V: RNCC: 5 | RNVC: 2
CU1008-1: RNCC: 5 | RNVC: 2
270: RNCC: 5 | RNVC: 2
ACV75: RNCC: 5 | RNVC: 9
2214EZ: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6428
Flexible Metal Conduit

002846428
WWC566: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-295-7005
Electrical Conduit Union

002957005
675: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-245-1700
Conduit Outlet

002451700
LL47: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
L687436-3: RNCC: 5 | RNVC: 2
L687436-8: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-245-1732
Conduit Outlet

002451732
T37: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
74350A: RNCC: 5 | RNVC: 1
T37: RNCC: 5 | RNVC: 2
70-106: RNCC: 5 | RNVC: 2
T-100: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-834-1093
Conduit Outlet

008341093
TB47: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-027-7104
Blank Panel

000277104
D21140BSIZEHTANALUM: RNCC: 3 | RNVC: 2
PWHA17 3-16TAN: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-003-2230
Electrical Equipment Mounting Base

000032230
35-29210-2: RNCC: 3 | RNVC: 2

19 May 1972

5975-00-158-8692
Electrical Grounding Plate

001588692
CVC810F3A4: RNCC: 3 | RNVC: 2

19 Jan 1973

5975-00-127-9989
Conduit Outlet

001279989
FS23: RNCC: 3 | RNVC: 2

21 Mar 1975

5975-00-066-5527
Sliding Bus Support

000665527
00-343A41-17-6570: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-152-1033
Conduit Outlet

001521033
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-079-4168
Electrical Entrance Cap

000794168
1532: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-009-7020
Fitting

000097020
81913-2: RNCC: 3 | RNVC: 9

29 Jul 1972

5975-00-007-1285
Junction Box

000071285
134AV14016-9: RNCC: 3 | RNVC: 2

6 Jul 1972

5975-00-861-6689
Electrical Conduit Adapter

008616689
CCT4: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-877-4848
Electrical Conduit Adapter

008774848
611: RNCC: 3 | RNVC: 2
603: RNCC: 3 | RNVC: 2
354-S: RNCC: 3 | RNVC: 2
603: RNCC: 5 | RNVC: 2
260: RNCC: 5 | RNVC: 2
13303: RNCC: 5 | RNVC: 2
59115D27-53: RNCC: 5 | RNVC: 2
59115D27-53: RNCC: 5 | RNVC: 2
RB322: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-044-6045
Ground Rod

000446045
P385PT: RNCC: 3 | RNVC: 2
J7105: RNCC: 5 | RNVC: 2
3755P: RNCC: 5 | RNVC: 9
9365: RNCC: E | RNVC: 8

1 Jan 1961

5975-00-019-1605
Interconnecting Box

000191605
909596-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-019-1619
Interconnecting Box

000191619
926693-3: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-027-7358
Junction Box

000277358
375875-60: RNCC: 3 | RNVC: 2

2 May 1967

5975-00-031-0510
Holder-Brush

000310510
30070-15: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-004-6522
Clamp

000046522
SMC502173: RNCC: 3 | RNVC: 2

7 Jun 1972

5975-01-624-3699
Electrical Equipment Rack

016243699
BW906A: RNCC: 3 | RNVC: 2

27 Dec 2013

5975-01-598-8873
Electrical Equipment Rack

015988873
221-4271: RNCC: 3 | RNVC: 9

31 Aug 2011

5975-01-594-5390
Electrical-Electronic Equipment Chassis

015945390
114T: RNCC: 3 | RNVC: 9
114T: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-00-015-7919
Cable Spacer

000157919
547-5262-002: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-012-3894
Terminal Retainer

000123894
1100968: RNCC: 3 | RNVC: 2
1100968: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-017-7247
Electrical-Electronic Equipment Chassis

000177247
39043: RNCC: 3 | RNVC: 9
6002-148: RNCC: 5 | RNVC: 2

8 May 1968

5975-00-501-2544
Conduit Outlet Cover

005012544
0: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-432-7000
Electrical Conduit Sealing Fitting

004327000
EYS11: RNCC: 3 | RNVC: 2
12007154-1: RNCC: 5 | RNVC: 2

3 May 1971

5975-00-586-8070
Electrical Conduit Adapter

005868070
113: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-195-5382
Strain Electrical Conductor Clamp

001955382
234005X59GR3: RNCC: 3 | RNVC: 9

11 Mar 1970

5975-00-878-4879
Flexible Metal Conduit

008784879
WWC566: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-504-8627
Junction Box Cover

005048627
72C14: RNCC: 3 | RNVC: 2
WJ800: RNCC: 4 | RNVC: 1
8485: RNCC: 5 | RNVC: 2
SP72C14: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-852-9045
Strain Electrical Conductor Clamp

008529045
80452: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-695-7925
Electrical Conduit Elbow

006957925
5276045: RNCC: 3 | RNVC: 2
5276045: RNCC: 3 | RNVC: 2
5213876: RNCC: 3 | RNVC: 2
43782: RNCC: 5 | RNVC: 9
GAN14044: RNCC: 5 | RNVC: 9
GAN14044: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-544-7840
Conduit Outlet Cover

005447840
DS10G: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-057-6656
Electrical Conduit Nipple

000576656
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-232-7640
Conduit Outlet

002327640
WC586: RNCC: 4 | RNVC: 1
LB27: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-280-3257
Electrical Conduit Union

002803257
WC408: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 4 | RNVC: 1
1514: RNCC: 5 | RNVC: 2
EK-409: RNCC: 5 | RNVC: 2
683: RNCC: 5 | RNVC: 2
173: RNCC: 5 | RNVC: 2
198: RNCC: 5 | RNVC: 2
EC-350: RNCC: 5 | RNVC: 2
1129: RNCC: 5 | RNVC: 9
4-350: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-085-8551
Electrical Components Tie Down Strap

000858551
TY-535M: RNCC: 3 | RNVC: 2
91489309: RNCC: 5 | RNVC: 2
TY535: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-109-5370
Electrical Box Connector

001095370
291: RNCC: 3 | RNVC: 2
2611: RNCC: 3 | RNVC: 2
25-8439P: RNCC: 5 | RNVC: 2
7240V: RNCC: 5 | RNVC: 2
2131: RNCC: 5 | RNVC: 2
CC-420: RNCC: 5 | RNVC: 9
600: RNCC: 5 | RNVC: 9
25-38C: RNCC: 5 | RNVC: 9
1051: RNCC: 5 | RNVC: 9
699: RNCC: 5 | RNVC: 9

2 Aug 1968

5975-01-011-9593
Electrical Components Tie Down Strap

010119593
SST1M-C10: RNCC: 3 | RNVC: 2
SST1MC10: RNCC: 5 | RNVC: 2
91276009: RNCC: 5 | RNVC: 9
91326811: RNCC: 5 | RNVC: 9

2 Nov 1975

5975-00-782-1118
Insulator Pin

007821118
5728: RNCC: 3 | RNVC: 2
5728: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-768-2966
Electrical Conduit Sealing Fitting

007682966
EYS2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-019-1781
Interconnecting Box

000191781
931138-101: RNCC: 3 | RNVC: 2
A148: RNCC: 3 | RNVC: 2
931138-801: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-988-0646
Electrical Cable Nipple

009880646
29: RNCC: 3 | RNVC: 1
GN825A1B: RNCC: 5 | RNVC: 2
8850966: RNCC: 5 | RNVC: 2
Z17C49521-2069: RNCC: 5 | RNVC: 2
0510-0755: RNCC: 5 | RNVC: 2
916B326-2: RNCC: 5 | RNVC: 9
0510-0755: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-132-9497
Conduit Outlet Cover

001329497
172: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-966-1023
Connector

009661023
975A: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-953-8805
Conduit Outlet Cover

009538805
S323: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-350-6181
Electrical-Electronic Equipment Chassis

013506181
115A907-1: RNCC: 3 | RNVC: 2

19 Dec 1991

5975-01-548-6567
Electrical Retainer

015486567
921029-1: RNCC: 3 | RNVC: 2

28 Feb 2007

5975-01-626-9900
Kvm Rack Console

016269900
331-9437: RNCC: 3 | RNVC: 9

27 Mar 2014

5975-01-521-3275
Electrical Equipment Rack

015213275
PTRK-14: RNCC: 3 | RNVC: 9

17 Jun 2004

5975-01-508-4133
Cable Marker Sleeve

015084133
TMS-SCE-3/4-2.-S1-4: RNCC: 3 | RNVC: 2
TMS-SCE-3/4-2.-S1-4: RNCC: 5 | RNVC: 2
TMS-SCE-3/4-2.0-S1-4: RNCC: 5 | RNVC: 2
ECS6036HN4: RNCC: 5 | RNVC: 2
TMS-SCE-3/4-2.0-S1-4: RNCC: 5 | RNVC: 2

20 May 2003

5975-01-553-6429
Electrical Equipment Rack

015536429
WR-44-32: RNCC: 3 | RNVC: 9

20 Jul 2007

5975-01-630-4429
Electrical Equipment Rack

016304429
DTRK-1218: RNCC: 3 | RNVC: 9

5 Aug 2014

5975-01-670-4370
Cable Strain Relief Bushing

016704370
965786-1: RNCC: 3 | RNVC: 2
KD-0194-02: RNCC: 5 | RNVC: 2
5010306096: RNCC: 5 | RNVC: 2

22 Feb 2018

5975-01-673-6377
Electrical Equipment Rack

016736377
EX-4PST-RMK: RNCC: 3 | RNVC: 2
EX-4PST-RMK: RNCC: 5 | RNVC: 2

20 Jun 2018

5975-01-674-2459
Electrical Equipment Cabinet

016742459
S6522B: RNCC: 3 | RNVC: 2

18 Jul 2018

5975-01-652-9516
Electrical Equipment Rack

016529516
MB671SK-BB: RNCC: 3 | RNVC: 9

9 Mar 2016

5975-01-587-9395
Electrical Equipment Rack

015879395
CT-100C OPT 59: RNCC: 3 | RNVC: 9
70-0118-000: RNCC: 5 | RNVC: 9

26 Aug 2010

5975-01-575-5617
Electrical Equipment Rack

015755617
MRK-4431AXS-26: RNCC: 3 | RNVC: 9

7 Jul 2009

5975-01-206-2558
Electrical Components Tie Down Strap

012062558
11437794-1: RNCC: 3 | RNVC: 2
PLT2S: RNCC: 5 | RNVC: 1

16 Apr 1985

5975-00-937-4584
Conduit Outlet

009374584
C28F0RM8: RNCC: 3 | RNVC: 2

21 Dec 1966

5975-01-581-9658
Junction Box

015819658
02-2801894-1: RNCC: 3 | RNVC: 2

3 Feb 2010

5975-00-964-3017
Conduit Outlet Cover

009643017
S324: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-559-1092
Blank Panel

015591092
PBL-4: RNCC: 3 | RNVC: 9

5 Dec 2007

5975-01-686-4428
Electrical Equipment Cabinet

016864428
CSE-835TQ-R800B: RNCC: 3 | RNVC: 2

13 Feb 2020

5975-01-466-9744
Electronic Equipment Mounting Tray

014669744
VM-80H: RNCC: 3 | RNVC: 9

9 Aug 1999

5975-00-861-6690
Junction Box Extension

008616690
5751-3: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-850-6807
Conduit Outlet

008506807
LFN27: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-688-5829
Electrical-Electronic Equipment Panel

016885829
410114162: RNCC: 3 | RNVC: 2

20 May 2020

5975-01-688-5824
Electrical-Electronic Equipment Panel

016885824
410114161: RNCC: 3 | RNVC: 2

20 May 2020

5975-01-683-4007
Electrical Equipment Rack

016834007
SC3T-1427-1217-12BK: RNCC: 3 | RNVC: 9

20 Sep 2019

5975-01-675-9142
Electrical Equipment Rack

016759142
MRK-3726: RNCC: 3 | RNVC: 9

3 Oct 2018

5975-01-665-7063
Electrical Equipment Rack

016657063
MRK-3736: RNCC: 3 | RNVC: 9

9 Aug 2017

5975-01-664-3033
Junction Box

016643033
11075-4960-01: RNCC: 3 | RNVC: 2

14 Jun 2017

5975-01-596-9653
Electrical Equipment Rack

015969653
210-26841: RNCC: 3 | RNVC: 9

25 May 2011

5975-01-678-9786
Electrical-Electronic Equipment Chassis

016789786
SCV3000: RNCC: 3 | RNVC: 9
92088333: RNCC: 5 | RNVC: 2

6 Mar 2019

5975-01-098-1640
Electrical Equipment Drawer

010981640
105995-7: RNCC: 3 | RNVC: 9

26 Jul 1980

5975-00-519-7708
Electrical Wall Plate

005197708
91121: RNCC: 3 | RNVC: 2
WP455: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-586-8069
Electrical Conduit Adapter

005868069
740AR: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-564-8335
Ground Rod

005648335
160AAR070LC: RNCC: 3 | RNVC: 9

19 Nov 1974

5975-01-034-2569
Electrical Components Tie Down Strap

010342569
PLC2S-S6: RNCC: 3 | RNVC: 2

22 Jan 1977

5975-01-038-2287
Electrical Box Connector

010382287
751BDC: RNCC: 3 | RNVC: 9
2813: RNCC: 5 | RNVC: 2
251-1: RNCC: 5 | RNVC: 9

1 Apr 1977

5975-01-521-2863
Electrical Equipment Rack

015212863
U1: RNCC: 3 | RNVC: 9

16 Jun 2004

5975-00-339-0326
Conduit Outlet

003390326
ARRH33: RNCC: 3 | RNVC: 2

4 Jan 1974

5975-00-003-4545
Electrical Equipment Mounting Base

000034545
10-30472-2: RNCC: 1 | RNVC: 2
MT-4508/ASQ-151: RNCC: 3 | RNVC: 2
10-30472-2: RNCC: 3 | RNVC: 2

21 May 1972

5975-00-203-6020
Electrical Grounding Plate

002036020
CVC810F3S5: RNCC: 3 | RNVC: 2

28 Mar 1973

5975-00-004-9109
Electrical Conduit Ferrule

000049109
2856979: RNCC: 3 | RNVC: 2

14 Jun 1972

5975-01-596-9616
Interconnecting Box

015969616
FXX10DVCARBLK: RNCC: 3 | RNVC: 9

25 May 2011

5975-00-880-3839
Junction Box

008803839
54171 1-2 3-4: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-01-463-5723
Electrical Wall Plate

014635723
CH5866N: RNCC: 3 | RNVC: 2

26 Mar 1999

5975-00-245-1697
Conduit Outlet

002451697
PARTLR37: RNCC: 3 | RNVC: 2
LR37: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-956-1366
Blank Snapin 3-4In

009561366
151: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-01-674-0334
Electrical Equipment Shelf

016740334
RSHLF: RNCC: 3 | RNVC: 2

10 Jul 2018

5975-01-676-5518
Electrical Equipment Cabinet

016765518
DWR-10-17PD: RNCC: 3 | RNVC: 9

1 Nov 2018

5975-01-678-9798
Electrical-Electronic Equipment Chassis

016789798
SCV320: RNCC: 3 | RNVC: 2
SCV320: RNCC: 3 | RNVC: 9
92088352: RNCC: 5 | RNVC: 2

6 Mar 2019

5975-01-682-2805
Electrical Equipment Cabinet

016822805
C5-FF31-3: RNCC: 3 | RNVC: 9
C5-FF31-3: RNCC: 5 | RNVC: 2

31 Jul 2019

5975-01-579-7382
Electrical-Electronic Equipment Chassis

015797382
POWEREDGE RACK 4220 42U: RNCC: 3 | RNVC: 2
PE 4220: RNCC: 5 | RNVC: 2
POWEREDGE 4220: RNCC: 5 | RNVC: 2
PE 4220: RNCC: 5 | RNVC: 9

21 Nov 2009

5975-01-570-5559
Electrical Equipment Rack

015705559
WRK-24MDK: RNCC: 3 | RNVC: 9

6 Jan 2009

5975-01-570-9852
Electrical Equipment Shelf

015709852
RMASV1925BK1: RNCC: 3 | RNVC: 2
1USHL-108: RNCC: 5 | RNVC: 9
2200288-201: RNCC: 7 | RNVC: 2

21 Jan 2009

5975-01-082-0426
Electrical Components Tie Down Strap

010820426
MS3368-1-3A: RNCC: 2 | RNVC: 2
MIL-S-23190: RNCC: 4 | RNVC: 1

24 Aug 1979

5975-00-003-3339
Rack Adapter

000033339
RA4: RNCC: 3 | RNVC: 2

21 May 1972

5975-00-003-3407
Electrical-Electronic Equipment Chassis

000033407
2288325-7: RNCC: 3 | RNVC: 2

24 May 1972

5975-01-664-6079
Electrical Equipment Shelf

016646079
SS: RNCC: 3 | RNVC: 9

27 Jun 2017

5975-00-164-2685
Electrical Grounding Plate

001642685
CVC810-65-3: RNCC: 3 | RNVC: 2

31 Jan 1973

5975-00-232-7643
Conduit Outlet

002327643
LB47: RNCC: 3 | RNVC: 2
7051: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
C236549-20: RNCC: 5 | RNVC: 2
C236549-23: RNCC: 5 | RNVC: 2
C236549-4: RNCC: 5 | RNVC: 2
C236S49-4: RNCC: 5 | RNVC: 2
C236549-14: RNCC: 5 | RNVC: 2
C236549-28: RNCC: 5 | RNVC: 2
C236549-23: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-252-0248
Electrical Equipment Rack

012520248
0N329367-6: RNCC: 3 | RNVC: 2
CY-8384(V)4/G: RNCC: 5 | RNVC: 2
815909-6: RNCC: 5 | RNVC: 9

28 Mar 1987

5975-00-050-1704
Electrical Conduit Bushing

000501704
121: RNCC: 3 | RNVC: 2
121: RNCC: 5 | RNVC: 2
2-38: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-22-612-1638
Electrical Cable Nipple

226121638
0557 010 00: RNCC: 3 | RNVC: 2

29 Nov 2005

5975-14-406-2145
Boitier Parafoudre

144062145
444851: RNCC: 3 | RNVC: 2
313521: RNCC: 5 | RNVC: 2
8250100: RNCC: 5 | RNVC: 2

8 Jan 1986

5975-12-352-9284
Junction Box

123529284
80690701: RNCC: 3 | RNVC: 2

9 Jan 2001

5975-01-681-4421
Electrical-Electronic Equipment Panel

016814421
68A810412-1015: RNCC: 3 | RNVC: 2

18 Jun 2019

5975-01-683-8750
Stuffing Tube

016838750
095605: RNCC: 3 | RNVC: 2
095643: RNCC: 5 | RNVC: 9

10 Oct 2019

5975-17-114-5780
Electrical Equipment Mounting Base

171145780
352242587600: RNCC: 3 | RNVC: 2
3522 425 87600: RNCC: 5 | RNVC: 2

28 Jan 2002

5975-13-117-3443
Cable Marker Sleeve

131173443
1121266A18: RNCC: 3 | RNVC: 2

6 Aug 1999

5975-12-338-0755
Junction Box Cover

123380755
20230-539: RNCC: 3 | RNVC: 2

18 May 1995

5975-14-356-6471

5975-14-316-9441

5975-00-296-4681
Electrical Box Connector

002964681
WF406: RNCC: 4 | RNVC: 1
WF406TYPE1CLASS1STYLED: RNCC: 5 | RNVC: 1

1 Jan 1961

5975-00-079-4162
Electrical Entrance Cap

000794162
1521: RNCC: 3 | RNVC: 2
17-75G: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-01-680-8020
Electrical-Electronic Equipment Chassis

016808020
015F012543-2: RNCC: 3 | RNVC: 2

21 May 2019

5975-01-683-0067
Electrical-Electronic Equipment Panel

016830067
9D02365-2: RNCC: 3 | RNVC: 2

4 Sep 2019

5975-01-681-7428
Electrical Wall Plate

016817428
72D420830-2003: RNCC: 3 | RNVC: 2

2 Jul 2019

5975-00-403-9490
Electrical Wall Plate

004039490
8342290: RNCC: 3 | RNVC: 2
98532: RNCC: 5 | RNVC: 2

28 Jul 1969

5975-01-679-5197
Electrical-Electronic Equipment Panel

016795197
CC51287-001: RNCC: 3 | RNVC: 2

27 Mar 2019

5975-01-678-5109
Electronic Equipment Mounting Tray

016785109
210-40790: RNCC: 3 | RNVC: 2

11 Feb 2019

5975-01-679-4823
Electrical-Electronic Equipment Panel

016794823
MIC-BLANK-MX104: RNCC: 3 | RNVC: 2
MIC-BLANK-MX104: RNCC: 5 | RNVC: 2

26 Mar 2019

5975-01-679-3036
Electrical Equipment Rack

016793036
CS-KIT-SMK=: RNCC: 3 | RNVC: 2

19 Mar 2019

5975-01-680-4890
Electrical Equipment Shelf

016804890
RMTS06B: RNCC: 3 | RNVC: 9

7 May 2019

5975-01-679-5835
Blank Panel

016795835
CC38128-003: RNCC: 3 | RNVC: 2

1 Apr 2019

5975-01-679-2086
Electrical-Electronic Equipment Chassis

016792086
SRX300-RMK1: RNCC: 3 | RNVC: 2
SRX300-RMK1: RNCC: 5 | RNVC: 2

13 Mar 2019

5975-01-680-1581
Cable Hanger

016801581
SSH-158: RNCC: 3 | RNVC: 9

22 Apr 2019

5975-00-548-5228
Electrical Conduit Coupling Nut

005485228
5276008: RNCC: 3 | RNVC: 2
5276008: RNCC: 3 | RNVC: 2
5276008: RNCC: 3 | RNVC: 2
BREX2PT345620: RNCC: 5 | RNVC: 2
H004-0345620: RNCC: 5 | RNVC: 2
GAN14047: RNCC: 5 | RNVC: 9
GAN14047: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-402-8498
Conduit Outlet

004028498
LR29: RNCC: 3 | RNVC: 2

8 Jun 1970

5975-01-676-2996
Junction Box Cover

016762996
39278-40128-1: RNCC: 3 | RNVC: 2

22 Oct 2018

5975-01-676-0840
Blank Panel

016760840
74R800203-2001: RNCC: 3 | RNVC: 2

11 Oct 2018

5975-01-677-6399
Electrical Equipment Drawer

016776399
FMT2A: RNCC: 3 | RNVC: 2

26 Dec 2018

5975-01-677-6704
Electrical Equipment Rack

016776704
AT978A: RNCC: 3 | RNVC: 2

28 Dec 2018

5975-01-678-4880
Electrical-Electronic Equipment Chassis

016784880
IQC5000B-RM2: RNCC: 3 | RNVC: 2

8 Feb 2019

5975-01-677-9971
Electrical-Electronic Equipment Panel

016779971
XSP-2663-S: RNCC: 3 | RNVC: 2

16 Jan 2019

5975-00-521-3828
Disc Cover

005213828
1707: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-3119
Conduit Outlet

005183119
T327: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-01-673-0201
Electrical Conduit Adapter

016730201
36-009: RNCC: 3 | RNVC: 2

29 May 2018

5975-01-673-3187
Chassis Base

016733187
RC001-1AC-03: RNCC: 3 | RNVC: 2

11 Jun 2018

5975-01-674-3816
Stuffing Tube

016743816
17P6E2022-519: RNCC: 3 | RNVC: 2

24 Jul 2018

5975-01-079-3939
Junction Box

010793939
4-ODSPL: RNCC: 3 | RNVC: 2

4 Jul 1979

5975-01-671-8443
Electrical Components Tie Down Strap

016718443
354615: RNCC: 3 | RNVC: 2
ZB0354615: RNCC: 5 | RNVC: 2

12 Apr 2018

5975-01-672-0665
Electrical Tie Down Mounting Base

016720665
CSS-LH: RNCC: 3 | RNVC: 2

20 Apr 2018

5975-00-004-1458
Electrical Equipment Rack

000041458
792-6755-001: RNCC: 3 | RNVC: 2

27 May 1972

5975-01-664-3997
Electrical-Electronic Equipment Chassis

016643997
H468519-1: RNCC: 3 | RNVC: 2

19 Jun 2017

5975-01-670-2319
Electrical-Electronic Equipment Chassis

016702319
10-215121-3: RNCC: 3 | RNVC: 2

13 Feb 2018

5975-01-663-1302
Junction Box

016631302
4010035: RNCC: 3 | RNVC: 2

27 Apr 2017

5975-01-664-4095
Electrical-Electronic Equipment Chassis

016644095
592263-001: RNCC: 3 | RNVC: 2

19 Jun 2017

5975-01-663-5040
Electrical Equipment Mounting Base

016635040
352E3031-15: RNCC: 3 | RNVC: 2

11 May 2017

5975-01-662-1030
Electrical Equipment Cabinet

016621030
BLADE-36R08: RNCC: 3 | RNVC: 2

27 Mar 2017

5975-01-661-4192
Interior Cable Rack

016614192
AR8163ABLK: RNCC: 3 | RNVC: 2

2 Mar 2017

5975-00-006-3682
Compression Ring

000063682
Z49040C0DE3: RNCC: 3 | RNVC: 9
5975-99-0970102: RNCC: 6 | RNVC: 9
Z49040C0DE3: RNCC: C | RNVC: 1

16 Jun 1972

5975-01-659-7031
Electrical-Electronic Equipment Chassis

016597031
XD001954: RNCC: 3 | RNVC: 2

10 Dec 2016

5975-01-660-7634
Electronic Equipment Mounting Tray

016607634
452-5073: RNCC: 3 | RNVC: 2

2 Feb 2017

5975-01-661-3550
Electrical Equipment Rack

016613550
64112B4: RNCC: 3 | RNVC: 2
64112B4-5: RNCC: 5 | RNVC: 2

28 Feb 2017

Load More Results