What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 194 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 194of 491

5975-00-169-0513
Computer Enterface

001690513
A363: RNCC: 3 | RNVC: 2

13 Nov 1970

5975-00-168-9168
Anchor Ground

001689168
SM-C-573526: RNCC: 3 | RNVC: 2

16 Apr 1971

5975-00-168-9123
Electrical Raceway

001689123
206-032-150-015: RNCC: 3 | RNVC: 2
206-032-150-15: RNCC: 5 | RNVC: 9

3 Mar 1971

5975-00-168-9124
Electrical Raceway

001689124
206-032-150-16: RNCC: 3 | RNVC: 2

3 Mar 1971

5975-00-168-9121
Conduit Outlet Cover

001689121
37-49: RNCC: 3 | RNVC: 2
37-49: RNCC: 3 | RNVC: 9

19 Feb 1971

5975-00-168-8770
Electrical Equipment Mounting Base

001688770
GD5985: RNCC: 3 | RNVC: 2
MT4354ARN84: RNCC: 5 | RNVC: 1
8010000206-1: RNCC: 5 | RNVC: 9

1 Feb 1971

5975-00-168-7988
Cable Clamp

001687988
SM-C-692769: RNCC: 3 | RNVC: 2

24 Oct 1970

5975-00-168-7943
Conduit Outlet Cover

001687943
GUB0110: RNCC: 3 | RNVC: 2

14 Oct 1970

5975-00-168-7892
Electrical Equipment Mounting Base

001687892
123SCAV376-1: RNCC: 1 | RNVC: 2
121890-1: RNCC: 3 | RNVC: 2
MT4322A: RNCC: 5 | RNVC: 9

4 Nov 1970

5975-00-168-7829
Electrical Equipment Mounting Base

001687829
709693-801: RNCC: 3 | RNVC: 2
MT4349AQA7V: RNCC: 5 | RNVC: 2

12 Oct 1970

5975-00-168-7736
Electrical Equipment Mounting Base

001687736
45781: RNCC: 3 | RNVC: 2
MT4347ALT27V: RNCC: 5 | RNVC: 2

30 Sep 1970

5975-00-168-7661
Electrical Equipment Mounting Base

001687661
111291: RNCC: 3 | RNVC: 9
MT4174URT26V: RNCC: 5 | RNVC: 1
111291: RNCC: C | RNVC: 1

2 Oct 1970

5975-00-168-7650
Electrical Equipment Mounting Base

001687650
110041: RNCC: 3 | RNVC: 2
110041: RNCC: 3 | RNVC: 9
MT4154ASH22V: RNCC: 5 | RNVC: 1

11 Sep 1970

5975-00-168-4429
Electrical Equipment Mounting Base

001684429
21773-1: RNCC: 3 | RNVC: 2
MT3950AU: RNCC: 5 | RNVC: 9

2 Sep 1970

5975-00-168-3492
Electrical Equipment Mounting Base

001683492
552450-1: RNCC: 3 | RNVC: 2
MT3618ASQ81: RNCC: 5 | RNVC: 1

3 Jun 1970

5975-00-168-2893
Insulator Bracket

001682893
237-7-1: RNCC: 3 | RNVC: 2

23 Sep 1970

5975-00-168-2793
Junction Box

001682793
11615339: RNCC: 3 | RNVC: 2
5975001682793: RNCC: 6 | RNVC: 9

26 Jul 1968

5975-00-167-6509
Clamp

001676509
165945: RNCC: 3 | RNVC: 2

17 Nov 1971

5975-00-167-4898
Blank Panel

001674898
203629-002: RNCC: 3 | RNVC: 2

17 Nov 1971

5975-00-166-9296
Electrical Equipment Mounting Base

001669296
10-30353-536: RNCC: 3 | RNVC: 2
21864-1: RNCC: 3 | RNVC: 2

13 Nov 1971

5975-00-166-5277
Electrical-Electronic Equipment Chassis

001665277
SMC344199: RNCC: 3 | RNVC: 2

20 Nov 1971

5975-00-166-5276
Electrical-Electronic Equipment Chassis

001665276
SMC344203: RNCC: 3 | RNVC: 2

20 Nov 1971

5975-00-165-5834
Electrical Equipment Leg

001655834
887242: RNCC: 3 | RNVC: 9

29 Aug 1971

5975-00-165-3416
Abandoned Outlet Assembly

001653416
5975001653416: RNCC: 3 | RNVC: 2
G201BRASS: RNCC: 5 | RNVC: 9

29 Aug 1971

5975-00-165-3421
Electrical Equipment Mounting Base

001653421
A0LAX970: RNCC: 3 | RNVC: 2

4 Sep 1971

5975-00-165-3042
Electrical Equipment Mounting Base

001653042
088418-0001: RNCC: 3 | RNVC: 2
088418-0002: RNCC: 5 | RNVC: 2

29 Aug 1971

5975-00-165-2088
Electrical Equipment Mounting Base

001652088
69E32720-10: RNCC: 3 | RNVC: 2

21 Aug 1972

5975-00-165-1089
Electrical Equipment Shelf

001651089
356-1: RNCC: 3 | RNVC: 2
MX9170GGC: RNCC: 5 | RNVC: 2

10 Nov 1971

5975-00-164-7661
Rigid Metal Conduit

001647661
32-75035-81: RNCC: 3 | RNVC: 2
32-75035-81: RNCC: 5 | RNVC: 2
32-75035-81: RNCC: 5 | RNVC: 2
32-75035-81: RNCC: 5 | RNVC: 2

6 Nov 1971

5975-00-164-3914
Junction Box

001643914
A16N12ALP: RNCC: 3 | RNVC: 2
A16N12A: RNCC: 3 | RNVC: 2

2 Feb 1973

5975-00-162-2083
Electrical Conduit Adapter

001622083
1252: RNCC: 3 | RNVC: 2
1252: RNCC: 5 | RNVC: 1
626: RNCC: 5 | RNVC: 9
326R: RNCC: 5 | RNVC: 9

2 Feb 1973

5975-00-161-8911
Strain Electrical Conductor Clamp

001618911
610-7416-001: RNCC: 3 | RNVC: 9

24 Oct 1971

5975-00-161-7998
Electrical Equipment Shelf

001617998
75209: RNCC: 3 | RNVC: 2

3 Nov 1971

5975-00-161-7449
Electrical Conduit Ferrule

001617449
CP1122-2: RNCC: 3 | RNVC: 2
CP1122-2: RNCC: 5 | RNVC: 2

22 Oct 1971

5975-00-161-7169
Conduit Adapter

001617169
B300889: RNCC: 3 | RNVC: 9
B300889: RNCC: C | RNVC: 1

22 Oct 1971

5975-00-160-2242
Electrical Equipment Mounting Base

001602242
221324-000: RNCC: 3 | RNVC: 2
MT4304AALR27A: RNCC: 5 | RNVC: 1
MT4304ALR43V: RNCC: 5 | RNVC: 1

4 Jun 1971

5975-00-160-2234
Electrical Equipment Mounting Base

001602234
221323-000: RNCC: 3 | RNVC: 2
MT4303ALR43V: RNCC: 5 | RNVC: 1

4 Jun 1971

5975-00-160-2228
Electrical Equipment Mounting Base

001602228
221322-000: RNCC: 3 | RNVC: 2
MT4305ALR43V: RNCC: 5 | RNVC: 1

27 May 1971

5975-00-160-2216
Electrical Equipment Mounting Base

001602216
221326-000: RNCC: 3 | RNVC: 2
MT4339ALR43V: RNCC: 5 | RNVC: 1

27 May 1971

5975-00-160-0256
Electrical Equipment Mounting Base

001600256
681100-1: RNCC: 3 | RNVC: 2
681100: RNCC: 3 | RNVC: 2
MT4376ASN92V: RNCC: 5 | RNVC: 1

17 Mar 1971

5975-00-159-8876
Electrical Cable Protector

001598876
11636000: RNCC: 3 | RNVC: 2

3 May 1971

5975-00-159-8388
Cable Collar

001598388
102092: RNCC: 3 | RNVC: 2

20 Oct 1971

5975-00-159-8376
Ground Plug

001598376
5550329: RNCC: 3 | RNVC: 2

20 Oct 1971

5975-00-159-6078
Electrical Equipment Mounting Base

001596078
6720-09002-3: RNCC: 3 | RNVC: 9

8 Dec 1971

5975-00-159-6077
Electrical Equipment Mounting Base

001596077
6720-09002-1: RNCC: 3 | RNVC: 9

8 Dec 1971

5975-00-159-4071
Multiplier Rack

001594071
209956PC1: RNCC: 3 | RNVC: 2
209956PC1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-157-9676
Electrical Cable Protector

001579676
481317PC7: RNCC: 3 | RNVC: 2
481317PC7: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-157-4296
Electrical-Electronic Equipment Chassis

001574296
325373PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-157-3949
Stuffing Box

001573949
200413PC4: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-157-1620
Chassis Base

001571620
417731PC2: RNCC: 3 | RNVC: 2
177030PC5: RNCC: 5 | RNVC: 1
232325: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-157-1036
Electrical-Electronic Equipment Chassis

001571036
325698PC1REVA: RNCC: 3 | RNVC: 2
325698PC1: RNCC: 3 | RNVC: 2
325698PC1: RNCC: 5 | RNVC: 2
325698PC1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-156-5571
Electrical Equipment Mounting Base

001565571
54501060: RNCC: 3 | RNVC: 9
MT3680AARN52V: RNCC: 5 | RNVC: 1
40-000152REVG: RNCC: 5 | RNVC: 2

8 Apr 1970

5975-00-156-3653
Electrical Nonmetallic Conduit Assembly

001563653
ECF-215: RNCC: 3 | RNVC: 2
P3398A: RNCC: 5 | RNVC: 9

28 May 1970

5975-00-156-3654
Hanger

001563654
11662-2: RNCC: 3 | RNVC: 9
715523-1: RNCC: 7 | RNVC: 2

28 May 1970

5975-00-156-3624
Nonmetallic Raceway

001563624
216-37610-9: RNCC: 3 | RNVC: 2

20 May 1970

5975-00-156-3618
Blank Panel

001563618
CVC2538-5: RNCC: 3 | RNVC: 2

13 May 1970

5975-00-156-3347
Stuffing Tube

001563347
410186-1: RNCC: 3 | RNVC: 2

20 Apr 1970

5975-00-156-3318
Flexible Metal Conduit

001563318
EF2 1-2: RNCC: 3 | RNVC: 2
87117: RNCC: 3 | RNVC: 2

10 Apr 1970

5975-00-156-0416
Junction Box Assembly

001560416
50-346491: RNCC: 3 | RNVC: 2
50-346491: RNCC: 3 | RNVC: 9

11 Aug 1972

5975-00-155-7065
Electrical Equipment Rack

001557065
A71003A: RNCC: 3 | RNVC: 2
A71003A: RNCC: 3 | RNVC: 9

21 Aug 1972

5975-00-155-4181
Blank Panel

001554181
SM-D-651719: RNCC: 3 | RNVC: 2
SM-D-651719: RNCC: 5 | RNVC: 2
SM-D-651719: RNCC: 5 | RNVC: 9

24 Oct 1971

5975-00-155-4180
Blank Panel

001554180
SM-D-651171: RNCC: 3 | RNVC: 2
SM-D-651171: RNCC: 5 | RNVC: 9
SM-D-651171: RNCC: 5 | RNVC: 9

24 Oct 1971

5975-00-155-3577
Stuffing Tube

001553577
325735PC3: RNCC: 3 | RNVC: 2
325735PC3: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-155-1698
Elbow

001551698
0102-9003: RNCC: 3 | RNVC: 2

9 Aug 1972

5975-00-153-7970
Junction Box Extension

001537970
52C52 1-2: RNCC: 3 | RNVC: 2

20 Oct 1971

5975-00-153-7969
Junction Box Extension

001537969
52C52 3-4: RNCC: 3 | RNVC: 2

20 Oct 1971

5975-00-153-6774
Junction Box Cover

001536774
A-A-59214-8-B-6: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
502K: RNCC: 5 | RNVC: 1
54C7: RNCC: 5 | RNVC: 1
8414: RNCC: 5 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9
26AR: RNCC: 5 | RNVC: 9
128TYPE8SIZESSTYLE45: RNCC: 5 | RNVC: 9
725: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-153-6206
Cable Strain Relief Bushing

001536206
9000S6202-73241ALT0TYPECSIZE4: RNCC: 3 | RNVC: 2
9000S6202-73241ALT0TYPECSIZE4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-153-6205
Cable Strain Relief Bushing

001536205
9000S6202-73241ALT0TYPECSIZE3: RNCC: 3 | RNVC: 2
9000S6202-73241ALT0TYPECSIZE3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-153-0050
Ground Rod

001530050
5360020: RNCC: 3 | RNVC: 2

8 Oct 1971

5975-00-152-9350
Electrical Equipment Mounting Base

001529350
1716246-501: RNCC: 3 | RNVC: 2
90975-1A: RNCC: 5 | RNVC: 2
90975-1A: RNCC: 5 | RNVC: 9
MI591086: RNCC: 5 | RNVC: 9
1716246-501: RNCC: 5 | RNVC: 9

14 Aug 1972

5975-00-152-1136
Electrical Conduit Coupling

001521136
ANSI UL6: RNCC: 3 | RNVC: 1

1 Jan 1961

5975-00-152-1114
Electrical Conduit Bushing

001521114
AA50553-3-1-Q-1-10-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
A-A-50553-III-Q-1: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-150-6400
Shockmount Base

001506400
424804-05-01: RNCC: 3 | RNVC: 2
215-37121-19: RNCC: 7 | RNVC: 2

22 Jul 1970

5975-00-149-7647
Terminal Gland Adapter

001497647
856C618PC1: RNCC: 3 | RNVC: 1

8 Oct 1971

5975-00-149-7465
Cable Strain Relief Bushing

001497465
319242: RNCC: 3 | RNVC: 2
319242: RNCC: 5 | RNVC: 9

29 Sep 1971

5975-00-149-7466
Cable Strain Relief Bushing

001497466
319246: RNCC: 3 | RNVC: 2
319246: RNCC: 5 | RNVC: 9

29 Sep 1971

5975-00-149-0758
Electrical Equipment Mounting Base

001490758
622-2242-001: RNCC: 3 | RNVC: 2
MT4781ARN: RNCC: 5 | RNVC: 1

8 Feb 1975

5975-00-149-0676
Electrical Equipment Mounting Base

001490676
705910-801: RNCC: 3 | RNVC: 2
MT4646ARC164V: RNCC: 5 | RNVC: 2

11 Jan 1975

5975-00-149-0675
Electrical Equipment Mounting Base

001490675
705909-801: RNCC: 3 | RNVC: 2
MT4647ARC164V: RNCC: 5 | RNVC: 2

11 Jan 1975

5975-00-148-6972
Electrical Bushing

001486972
0154-1-2161: RNCC: 3 | RNVC: 9

20 Oct 1974

5975-00-148-4132
Rigid Metal Conduit

001484132
32-75035-74: RNCC: 3 | RNVC: 2
32-75035-74: RNCC: 5 | RNVC: 2
32-75035-74: RNCC: 5 | RNVC: 2
32-75035-74: RNCC: 5 | RNVC: 2

26 Sep 1971

5975-00-148-0914
Electrical Cable Nipple

001480914
389: RNCC: 3 | RNVC: 1
389: RNCC: 5 | RNVC: 9

6 Oct 1971

5975-00-147-4790
Clamp Tube Mounting

001474790
G60644A4: RNCC: 3 | RNVC: 9

17 Sep 1971

5975-00-147-4791
Clamp Tube Mounting

001474791
G60644A6: RNCC: 3 | RNVC: 9

17 Sep 1971

5975-00-146-7925
Electrical Equipment Mounting Base

001467925
12E134-805: RNCC: 3 | RNVC: 2

24 Sep 1971

5975-00-146-6555
Electrical Wall Plate

001466555
SCB577852: RNCC: 3 | RNVC: 2

24 Sep 1971

5975-00-141-8513
Engine Cunduit Assembly

001418513
6876159: RNCC: 3 | RNVC: 2

12 Jan 1973

5975-00-141-0554
Cable Rack Extension

001410554
120571LH: RNCC: 3 | RNVC: 2
120571LH: RNCC: 5 | RNVC: 2
21170001-1: RNCC: 7 | RNVC: 9

20 Apr 1970

5975-00-141-0538
Cable Strain Relief Bushing

001410538
SR30-1: RNCC: 3 | RNVC: 2

17 Dec 1969

5975-00-141-0484
Stuffing Tube

001410484
J163-100: RNCC: 3 | RNVC: 2
710007-1: RNCC: 7 | RNVC: 2

10 Oct 1969

5975-00-141-0492
Electrical Conduit Bend

001410492
E11113: RNCC: 3 | RNVC: 2
E11113: RNCC: 5 | RNVC: 9
711703-4: RNCC: 7 | RNVC: 2

17 Oct 1969

5975-00-141-0488
Electrical Equipment Rack

001410488
H871161-1: RNCC: 3 | RNVC: 9

22 Oct 1969

5975-00-141-0475
Junction Box Cover

001410475
ZT32-47CC0G-5: RNCC: 3 | RNVC: 2
MT4033-050-010: RNCC: 5 | RNVC: 9

17 Oct 1969

5975-00-141-0476
Junction Box Cover

001410476
MT5122-050-010: RNCC: 3 | RNVC: 2

1 Oct 1969

5975-00-141-0474
Junction Box Cover

001410474
MT4022-050-010: RNCC: 3 | RNVC: 2

1 Oct 1969

5975-00-141-0469
Junction Box

001410469
ZT60-120-53: RNCC: 3 | RNVC: 2
MT1236-040-310: RNCC: 5 | RNVC: 9

10 Oct 1969

5975-00-141-0466
Junction Box

001410466
ZT100-100-80: RNCC: 3 | RNVC: 2
MT1382-063-500: RNCC: 5 | RNVC: 9
MT1382-064-500: RNCC: 5 | RNVC: 9

1 Oct 1969

5975-00-141-0449
Electrical Equipment Mounting Base

001410449
700834-1: RNCC: 3 | RNVC: 2
MT-4198/APQ-122(V): RNCC: 5 | RNVC: 1
683657-1: RNCC: 5 | RNVC: 2

12 Dec 1969

5975-00-141-0448
Electrical Conduit Ferrule

001410448
MS25065-3: RNCC: 2 | RNVC: 2

25 Aug 1969

5975-00-140-9559
Rigid Metal Conduit Assembly

001409559
32-75046-2: RNCC: 3 | RNVC: 2

10 Sep 1971

5975-00-140-9552
Rigid Metal Conduit

001409552
32-75035-43: RNCC: 3 | RNVC: 2
32-75035-43: RNCC: 5 | RNVC: 2
32-75035-43: RNCC: 5 | RNVC: 2

10 Sep 1971

5975-00-140-8864
Electrical Equipment Mounting Base

001408864
12E134-807: RNCC: 3 | RNVC: 2

10 Sep 1971

5975-00-140-7928
Terminating Kit

001407928
751-34225: RNCC: 3 | RNVC: 2

7 Sep 1974

5975-00-140-5352
Ground Rod

001405352
2053640: RNCC: 3 | RNVC: 2

25 Aug 1971

5975-00-140-3225
Inner Ring

001403225
GA800GV24: RNCC: 3 | RNVC: 2
012-12-000-11: RNCC: 5 | RNVC: 1

21 Aug 1971

5975-00-140-1825
Electrical Equipment Mounting Base

001401825
622-1025-001: RNCC: 3 | RNVC: 2
MT4609ARC159V: RNCC: 5 | RNVC: 1

17 May 1974

5975-00-140-1229
Electrical Equipment Mounting Base

001401229
386AS150: RNCC: 3 | RNVC: 2
MT4518APX71A: RNCC: 5 | RNVC: 1

1 May 1974

5975-00-140-1224
Electrical-Electronic Equipment Chassis

001401224
22705-22: RNCC: 3 | RNVC: 2

1 May 1974

5975-00-139-5369
Electrical Conduit Ferrule

001395369
88868: RNCC: 3 | RNVC: 2
88868: RNCC: 5 | RNVC: 9

1 Sep 1971

5975-00-139-5368
Electrical Conduit Ferrule

001395368
88867: RNCC: 3 | RNVC: 2
88867: RNCC: 5 | RNVC: 9

1 Sep 1971

5975-00-139-5346
45Deg Wye Outlet Assembly

001395346
88916: RNCC: 3 | RNVC: 2
88916: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5347
Elbow Assembly

001395347
88723: RNCC: 3 | RNVC: 2
88723: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5343
Tee Outlet Assembly

001395343
88913: RNCC: 3 | RNVC: 2
88913: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5345
Elbow Assembly

001395345
88915: RNCC: 3 | RNVC: 2
88915: RNCC: 5 | RNVC: 2

18 Aug 1971

5975-00-139-5344
Elbow Assembly

001395344
88910: RNCC: 3 | RNVC: 2
88910: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5342
Elbow Assembly

001395342
88729: RNCC: 3 | RNVC: 2
88729: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5334
Elbow Outlet Assembly

001395334
88914: RNCC: 3 | RNVC: 2
88914: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5341
Wye Outlet Assembly

001395341
88912: RNCC: 3 | RNVC: 2
88912: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5340
Wye Outlet Assembly

001395340
88726: RNCC: 3 | RNVC: 2
88726: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-5333
Tee Outlet Assembly

001395333
88911: RNCC: 3 | RNVC: 2
88911: RNCC: 5 | RNVC: 9

18 Aug 1971

5975-00-139-1427
Chassis Base

001391427
917233-801: RNCC: 3 | RNVC: 2

9 Aug 1971

5975-00-139-1101
Electrical Equipment Mounting Base

001391101
74402025001: RNCC: 3 | RNVC: 2

25 Aug 1971

5975-00-138-8688
Junction Box Cover

001388688
209-075-204-5: RNCC: 3 | RNVC: 2

25 Aug 1971

5975-00-138-8587
Electrical Equipment Shelf

001388587
92-040010: RNCC: 3 | RNVC: 2
400-10: RNCC: 5 | RNVC: 2
TLC4900A-10: RNCC: 5 | RNVC: 2
CH684G: RNCC: 5 | RNVC: 2

25 Aug 1971

5975-00-138-7513
Electrical Equipment Mounting Base

001387513
60711000-601A: RNCC: 3 | RNVC: 2
MT4534ARN99V: RNCC: 5 | RNVC: 1

1 Nov 1974

5975-00-138-6786
Electrical Equipment Mounting Base

001386786
12E40353-3: RNCC: 3 | RNVC: 2

30 Jul 1971

5975-00-138-4859
Electrical Grounding Plate

001384859
870453-102-1: RNCC: 3 | RNVC: 2

28 Jul 1971

5975-00-138-2360
Electrical Box Connector

001382360
SCC577831: RNCC: 3 | RNVC: 2

24 Jul 1971

5975-00-137-9530
Electrical Conduit Elbow

001379530
E1124-391-50KC: RNCC: 3 | RNVC: 2

23 Jul 1971

5975-00-137-1550
Blank Panel

001371550
LBP10: RNCC: 3 | RNVC: 9

11 Jul 1971

5975-00-137-1551
Blank Panel

001371551
LBP20: RNCC: 3 | RNVC: 9

11 Jul 1971

5975-00-137-0377
Electrical Grounding Plate

001370377
673257-1: RNCC: 3 | RNVC: 2

11 Jul 1971

5975-00-137-0356
Junction Box

001370356
477A1131106-009: RNCC: 3 | RNVC: 2
477A1131106-019: RNCC: E | RNVC: 8

11 Jul 1971

5975-00-136-4968
Electrical Equipment Leg

001364968
SMD642961: RNCC: 3 | RNVC: 2
MX6334GR: RNCC: 5 | RNVC: 2
400100-00: RNCC: 5 | RNVC: 2

24 Jan 1969

5975-00-136-1252
Electrical Equipment Drawer

001361252
SME652645-2: RNCC: 3 | RNVC: 2

22 Jan 1969

5975-00-136-1254
Electrical Equipment Drawer

001361254
SM-E-650586: RNCC: 3 | RNVC: 2

22 Jan 1969

5975-00-136-1251
Electrical Equipment Drawer

001361251
SME652619: RNCC: 3 | RNVC: 2

22 Jan 1969

5975-00-135-9290
Junction Box Assembly

001359290
2812110: RNCC: 3 | RNVC: 2
50915-40115-10: RNCC: 5 | RNVC: 9
BUWEPSDWG2812110: RNCC: 5 | RNVC: 9

10 Jan 1969

5975-00-135-9299
Junction Box Assembly

001359299
2842788: RNCC: 3 | RNVC: 2
BUWEPSDWG2842788: RNCC: 3 | RNVC: 2
2812138: RNCC: 3 | RNVC: 2
50915-40116-10: RNCC: 5 | RNVC: 9

10 Jan 1969

5975-00-135-5019
Junction Box

001355019
A02E2770-1: RNCC: 3 | RNVC: 2

6 Jan 1969

5975-00-134-9779
Stuffing Tube

001349779
S214-101: RNCC: 3 | RNVC: 2
A15332-002: RNCC: 5 | RNVC: 2

26 Jul 1968

5975-00-134-8529
Electrical-Electronic Equipment Chassis

001348529
0N047852: RNCC: 3 | RNVC: 2

4 Aug 1972

5975-00-134-8410
Electrical Equipment Cabinet Case

001348410
SM-D-603956: RNCC: 3 | RNVC: 2
SM-D-603956: RNCC: 5 | RNVC: 2

11 Jul 1971

5975-00-134-4933
Electrical Equipment Rack

001344933
MIS-10341TYPE1: RNCC: 3 | RNVC: 2
MIS-10341TYPE1: RNCC: 5 | RNVC: 1

18 Aug 1969

5975-00-134-3667
Electrical Components Tie Down Strap

001343667
BT-4-01NT: RNCC: 3 | RNVC: 9
BT-4-01-NT: RNCC: 5 | RNVC: 2
EZ18: RNCC: 5 | RNVC: 9

1 Oct 1969

5975-00-134-1480
Cable Inlet Assembly

001341480
SMB744785: RNCC: 3 | RNVC: 2

28 Mar 1974

5975-00-134-1305
Electrical Equipment Mounting Base

001341305
MT4667U: RNCC: 3 | RNVC: 2
0332939: RNCC: 3 | RNVC: 9

3 Dec 1973

5975-00-134-1190
Junction Box

001341190
9099276: RNCC: 3 | RNVC: 2

1 Nov 1968

5975-00-134-0401
Electrical Conduit Bend

001340401
CPA2495A001: RNCC: 3 | RNVC: 9

27 Nov 1968

5975-00-134-0391
Blank Panel

001340391
CVC2538-1: RNCC: 3 | RNVC: 2
CVC2538-1: RNCC: 5 | RNVC: 9

18 Nov 1968

5975-00-134-0390
Blank Panel

001340390
CVC2538-3: RNCC: 3 | RNVC: 2

18 Nov 1968

5975-00-133-9064
Junction Box

001339064
114E3060-26: RNCC: 3 | RNVC: 2

4 Sep 1968

5975-00-133-8978
Electrical Equipment Mounting Base

001338978
772-5135-001: RNCC: 3 | RNVC: 2
MT3068AAPN158: RNCC: 5 | RNVC: 2

14 Aug 1968

5975-00-133-8698
Conduit Section Cover

001338698
10044645-5: RNCC: 3 | RNVC: 2

4 Sep 1968

5975-00-133-7436
Blank Panel

001337436
209-075-298-1: RNCC: 3 | RNVC: 2

13 Oct 1969

5975-00-133-4327
Chassis Base

001334327
16601113-001: RNCC: 3 | RNVC: 2

26 Dec 1968

5975-00-133-4328
Chassis Base

001334328
16601116-001: RNCC: 3 | RNVC: 2

26 Dec 1968

5975-00-133-4330
Chassis Base

001334330
16601112-001: RNCC: 3 | RNVC: 2

26 Dec 1968

5975-00-132-9473
Flexible Metal Conduit

001329473
A-A-52440-1B-6: RNCC: 2 | RNVC: 2
A-A-52440: RNCC: 4 | RNVC: 1
152-40: RNCC: 5 | RNVC: 1
MIL-C-13909: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-132-4816
Contractor Cover

001324816
9975484: RNCC: 3 | RNVC: 2

18 Dec 1968

5975-00-131-6811
Electrical Cable Nipple

001316811
85557P1: RNCC: 3 | RNVC: 2

11 Dec 1968

5975-00-131-3495
Electrical Cable Nipple

001313495
57776-507-1: RNCC: 3 | RNVC: 2

9 Dec 1968

5975-00-130-9805
Clamp Hanger

001309805
166203PC14: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-130-9795
Cable Hanger

001309795
166203PC30: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-130-5682
Electrical-Electronic Equipment Chassis

001305682
SC-C-599603: RNCC: 3 | RNVC: 2
599603: RNCC: 5 | RNVC: 2

6 Dec 1968

5975-00-129-6056
Electrical Equipment Leg Section

001296056
SMD610234: RNCC: 3 | RNVC: 2

4 Dec 1968

5975-00-128-7916
Electrical Equipment Mounting Base

001287916
6F1092-1: RNCC: 3 | RNVC: 2

9 Mar 1975

5975-00-127-6751
Clamp Insulator

001276751
119390: RNCC: 3 | RNVC: 2

27 Nov 1968

5975-00-127-5874
Preformed Guy Grip

001275874
BG4223: RNCC: 3 | RNVC: 2

27 Nov 1968

5975-00-127-1321
Electrical Bonding Ring

001271321
D-5886: RNCC: 3 | RNVC: 9
MD84701PCD5886: RNCC: 5 | RNVC: 9
D-5886-A: RNCC: 5 | RNVC: 9
MD84760PCD5886: RNCC: 5 | RNVC: 9
MD84785PC5886B: RNCC: 5 | RNVC: 9
D-5886-B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-127-0542
Conduit Outlet

001270542
AA50563-207ALLRB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSR-75: RNCC: 5 | RNVC: 9
50563-II-7-1-LR-0.75: RNCC: 5 | RNVC: 9
FSR1-75: RNCC: 5 | RNVC: 9

2 Dec 1968

5975-00-126-5724
Conduit Outlet

001265724
FSCT1-75: RNCC: 3 | RNVC: 2
FSCT-1-75: RNCC: 5 | RNVC: 9

2 Dec 1968

5975-00-126-4592
Electrical Cable Nipple

001264592
580R690H01: RNCC: 3 | RNVC: 2
NE5020: RNCC: 5 | RNVC: 2
580R690H01: RNCC: 5 | RNVC: 2

20 Nov 1968

5975-00-126-0415
Electrical-Electronic Equipment Panel

001260415
566-2569-004: RNCC: 3 | RNVC: 2

27 Dec 1972

5975-00-125-6683
Conduit Outlet Cover

001256683
RSMP3: RNCC: 3 | RNVC: 2

22 Nov 1968

5975-00-124-8982
Insulated Cable Clamp

001248982
114614: RNCC: 3 | RNVC: 2

8 Nov 1968

5975-00-124-1327
Junction Box

001241327
10905693: RNCC: 3 | RNVC: 2

6 Nov 1968

5975-00-123-3347
Junction Box

001233347
SPECIAL JOB NO. 3560T: RNCC: 3 | RNVC: 9
69805: RNCC: 5 | RNVC: 9

1 Nov 1968

5975-00-123-3348
Knockout Cover

001233348
12-0600-0100: RNCC: 3 | RNVC: 2
1A500-116: RNCC: 5 | RNVC: 9
K0C1: RNCC: 5 | RNVC: 9
K0C100: RNCC: 5 | RNVC: 9
K0C1: RNCC: 5 | RNVC: 9
K0C100: RNCC: 5 | RNVC: 9
1A500-116: RNCC: 5 | RNVC: 9
12-0600-0100: RNCC: 5 | RNVC: 9

1 Nov 1968

5975-00-123-3346
Ground Strap

001233346
023-2466: RNCC: 3 | RNVC: 9
23-2466: RNCC: 5 | RNVC: 9

1 Nov 1968

5975-00-123-3344
Splicing Kit

001233344
601351: RNCC: 3 | RNVC: 9

1 Nov 1968

5975-00-123-0610
Electrical Equipment Cabinet

001230610
SCDL157740: RNCC: 3 | RNVC: 2

1 Nov 1968

5975-00-123-0381
Electrical-Electronic Equipment Chassis

001230381
10215979: RNCC: 3 | RNVC: 2
10215979: RNCC: 5 | RNVC: 2
10215979: RNCC: 5 | RNVC: 9

1 Nov 1968

5975-00-122-6468
Electrical Grounding Plate

001226468
94038: RNCC: 3 | RNVC: 2

6 Nov 1968

5975-00-122-2427
Flexible Metal Conduit Assembly

001222427
5114173-36: RNCC: 3 | RNVC: 2
5114173-36: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-122-2358
Knockout Cover

001222358
KO-C 1-1/2: RNCC: 3 | RNVC: 2
K0C1-1-2: RNCC: 5 | RNVC: 9

28 Oct 1968

5975-00-118-8844
Cable Bushing

001188844
300820: RNCC: 3 | RNVC: 9

14 Oct 1968

5975-00-118-8701
Conduit Outlet Cover

001188701
8528838: RNCC: 3 | RNVC: 2
YYLP81: RNCC: 5 | RNVC: 2

14 Oct 1968

5975-00-118-7063
Fl Conduit Assembly

001187063
C223R0375-1402L6L6KC: RNCC: 3 | RNVC: 2

11 Oct 1968

5975-00-117-9515
Conduit Outlet

001179515
9001TYPEKYC1: RNCC: 3 | RNVC: 2

4 Jan 1973

5975-00-117-5630
Electrical Box Connector

001175630
9-20EX8: RNCC: 3 | RNVC: 2

4 Oct 1968

5975-00-115-1932
Cable Marker Sleeve

001151932
6861827-02: RNCC: 3 | RNVC: 2
6861827-02: RNCC: 5 | RNVC: 2
EU80599: RNCC: 5 | RNVC: 2

13 Sep 1968

5975-00-115-1931
Cable Marker Sleeve

001151931
6861827-01: RNCC: 3 | RNVC: 2
EU80598: RNCC: 5 | RNVC: 2
6861827-01: RNCC: 5 | RNVC: 2

13 Sep 1968

5975-00-114-9926
Electrical Equipment Mounting Base

001149926
1128SCAV779-5: RNCC: 1 | RNVC: 3
4013455: RNCC: 3 | RNVC: 3
MT2383ASW16: RNCC: 5 | RNVC: 1

19 Oct 1973

5975-00-114-9862
Conduit Outlet

001149862
277-5: RNCC: 3 | RNVC: 2

24 Dec 1972

5975-00-114-5354
Electrical Equipment Mounting Base

001145354
215-37121-25: RNCC: 1 | RNVC: 3
424804-08-01: RNCC: 3 | RNVC: 3
424804-07-01: RNCC: 5 | RNVC: 9
215-37121-22: RNCC: 5 | RNVC: 9

24 Dec 1972

5975-00-114-2158
Electrical Equipment Mounting Base

001142158
21886-2: RNCC: 3 | RNVC: 2
21886: RNCC: 5 | RNVC: 9

4 Apr 1973

5975-00-114-1917
Conduit Chase Nipple

001141917
28-12E16: RNCC: 3 | RNVC: 2

24 Jan 1973

5975-00-114-1328
Electrical Cable Nipple

001141328
90: RNCC: 3 | RNVC: 1
190-1: RNCC: 3 | RNVC: 2

25 Sep 1968

5975-00-114-1329
Electrical Cable Nipple

001141329
90: RNCC: 3 | RNVC: 1
190-2: RNCC: 3 | RNVC: 2

25 Sep 1968

5975-00-113-7312
Blank Panel

001137312
2950-539: RNCC: 3 | RNVC: 9
2950-539: RNCC: 5 | RNVC: 9

4 Sep 1968

5975-00-113-4668
Electrical-Electronic Equipment Chassis

001134668
7634185G1: RNCC: 3 | RNVC: 9

30 Aug 1968

5975-00-113-1554
Electrical Tie Down Mounting Base

001131554
TC111A: RNCC: 3 | RNVC: 2
952079-0002: RNCC: 5 | RNVC: 9
TC111A: RNCC: 5 | RNVC: 9

28 Aug 1968

5975-00-113-1360
Seal Boot

001131360
13128-6: RNCC: 3 | RNVC: 9

28 Aug 1968

5975-00-111-6781
Junction Box

001116781
114E3060-1: RNCC: 3 | RNVC: 2
114E3060-19: RNCC: 5 | RNVC: 2

21 Aug 1968

5975-00-111-6780
Junction Box

001116780
114E3060-24: RNCC: 3 | RNVC: 2

21 Aug 1968

5975-00-110-6171
Electrical Equipment Mounting Base

001106171
3187890: RNCC: 3 | RNVC: 2
3187890: RNCC: 3 | RNVC: 9
3165930: RNCC: E | RNVC: 8
MT4035AQS13A: RNCC: E | RNVC: 8

3 Dec 1972

5975-00-110-5776
Electrical Equipment Rack

001105776
606-7382-001: RNCC: 3 | RNVC: 2

22 Nov 1972

5975-00-110-5775
Electrical Equipment Rack

001105775
777-8594-001: RNCC: 3 | RNVC: 2
77-8594-001: RNCC: 5 | RNVC: 9

22 Nov 1972

5975-00-110-4089
Electrical-Electronic Equipment Chassis

001104089
10232730: RNCC: 3 | RNVC: 2
10232730: RNCC: 5 | RNVC: 2
10232730: RNCC: 5 | RNVC: 9
10232730: RNCC: 5 | RNVC: 9

9 Aug 1968

5975-00-110-1986
Rigid Metal Conduit Assembly

001101986
8762624: RNCC: 3 | RNVC: 2

5 Aug 1968

5975-00-109-9525
Electrical Equipment Mounting Base

001099525
116168: RNCC: 3 | RNVC: 9
MT4174AURT26V: RNCC: 5 | RNVC: 1
116168: RNCC: C | RNVC: 1

30 Aug 1972

5975-00-108-6456
Wire Mesh Grip

001086456
RPE417-116: RNCC: 3 | RNVC: 2

17 Dec 1972

5975-00-107-4283
Blank Panel

001074283
8762306: RNCC: 3 | RNVC: 2

26 Jul 1968

5975-00-107-1853
Cable Spacer

001071853
SMD744374: RNCC: 3 | RNVC: 2
SMD744374: RNCC: 5 | RNVC: 2

8 Apr 1974

5975-00-106-9565
Interconnecting Box

001069565
614360-1: RNCC: 3 | RNVC: 2

27 Aug 1972

5975-00-106-9568
Interconnecting Box

001069568
613677-1: RNCC: 3 | RNVC: 2

27 Aug 1972

5975-00-106-9322
Blank Panel

001069322
761-8927-002: RNCC: 3 | RNVC: 2

19 Jul 1968

5975-00-106-6145
Electrical Equipment Rack

001066145
227006-000: RNCC: 3 | RNVC: 2

17 Jul 1968

5975-00-106-3375
Electrical Equipment Mounting Base

001063375
1925902-1: RNCC: 3 | RNVC: 2
10-30419-519: RNCC: 5 | RNVC: 2
1925902-1: RNCC: 5 | RNVC: 9

12 Jul 1968

5975-00-106-3374
Electrical Equipment Mounting Base

001063374
1925899-1: RNCC: 3 | RNVC: 2
10-30419-516: RNCC: 5 | RNVC: 2
1925899-1: RNCC: 5 | RNVC: 9

12 Jul 1968

5975-00-106-3373
Electrical Equipment Mounting Base

001063373
1925897-1: RNCC: 3 | RNVC: 2
10-30419-514: RNCC: 5 | RNVC: 2
1925897-1: RNCC: 5 | RNVC: 9

12 Jul 1968

5975-00-105-8858
Half Condu Coupling

001058858
4B22076-101A: RNCC: 3 | RNVC: 2

5 Jul 1968

5975-00-105-8388
Stuffing Tube

001058388
S214-105: RNCC: 3 | RNVC: 2
A15332-007: RNCC: 5 | RNVC: 9

5 Jul 1968

5975-00-105-6937
Electrical-Electronic Equipment Panel

001056937
1540952: RNCC: 3 | RNVC: 2

3 Jul 1968

5975-00-105-5107
Electrical Equipment Mounting Base

001055107
964-0068-001: RNCC: 3 | RNVC: 2
111748: RNCC: 3 | RNVC: 2
MILC83014: RNCC: 4 | RNVC: 1
MTU47A: RNCC: 5 | RNVC: 2

1 Jul 1968

5975-00-105-2332
Conduit Outlet Cover

001052332
JBKB: RNCC: 3 | RNVC: 2

10 Jul 1968

5975-00-105-1316
Control Equ Conduit

001051316
300-537052-81: RNCC: 3 | RNVC: 9
300-537052-81: RNCC: 5 | RNVC: 9

26 Jun 1968

5975-00-104-9989
Stuffing Tube

001049989
S214-109: RNCC: 3 | RNVC: 2

24 Jun 1968

5975-00-104-9172
Electrical Equipment Rack

001049172
MT2299URLESSSH0CKM0UNTS: RNCC: 3 | RNVC: 2

3 Jul 1968

5975-00-104-5399
Strain Electrical Conductor Clamp

001045399
C5251: RNCC: 3 | RNVC: 9

19 Jun 1968

5975-00-103-6653
Electrical Equipment Mounting Base

001036653
21078-1: RNCC: 3 | RNVC: 2

19 Jun 1968

5975-00-103-6575
Electrical Conductor Bushing

001036575
19227: RNCC: 3 | RNVC: 2

12 Jun 1968

5975-00-103-2814
Electrical Nonmetallic Conduit Assembly

001032814
218-20176-1: RNCC: 3 | RNVC: 2

7 Jun 1968

5975-00-103-1695
Stuffing Tube

001031695
S214-1025: RNCC: 3 | RNVC: 2
A15332-004: RNCC: 5 | RNVC: 2

5 Jun 1968

5975-00-102-4725
Electrical Equipment Rack

001024725
F57073: RNCC: 3 | RNVC: 9
MT4025VCC: RNCC: 5 | RNVC: 2

29 May 1968

5975-00-102-4022
Cable Clamp

001024022
214M0076P001: RNCC: 3 | RNVC: 2
214M0076P001: RNCC: 5 | RNVC: 2
214M0076P001: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-102-2435
Radio Set Mounting

001022435
622-0678-001: RNCC: 3 | RNVC: 2
MT4511ARC158: RNCC: 5 | RNVC: 1

19 Aug 1972

5975-00-102-0126
Electrical Equipment Mounting Base

001020126
588M1001G1: RNCC: 3 | RNVC: 2
MT4453APN182V: RNCC: 5 | RNVC: 1
588M1001G1: RNCC: 5 | RNVC: 9

19 Aug 1972

5975-00-102-0113
Electrical Equipment Mounting Base

001020113
588M2001G1: RNCC: 3 | RNVC: 2
MT4454APN182V: RNCC: 5 | RNVC: 1
588M2001G1: RNCC: 5 | RNVC: 9

21 Jul 1972

5975-00-101-4671
Electrical Equipment Mounting Base

001014671
21909-2: RNCC: 3 | RNVC: 2

6 Jul 1972

5975-00-101-0284
Electrical Box Connector

001010284
5340: RNCC: 3 | RNVC: 2
STB-400: RNCC: 5 | RNVC: 2
4Q-400-T: RNCC: 5 | RNVC: 9
LTB-400: RNCC: 5 | RNVC: 9
11-400B: RNCC: 5 | RNVC: 9

3 Jun 1968

5975-00-099-6615
Electrical Conduit Coupling Nut

000996615
185143GS0001: RNCC: 3 | RNVC: 2

2 Jan 1996

5975-00-098-4161
Flexible Metal Conduit Assembly

000984161
S3242-2800: RNCC: 3 | RNVC: 2
WE301-1-2700: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-098-4157
Flexible Metal Conduit Assembly

000984157
S36241-3500: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-097-9582
Electrical Equipment Mounting Base

000979582
92-060-1: RNCC: 3 | RNVC: 2
MT4312AQS13B: RNCC: 5 | RNVC: 1
3183550: RNCC: 5 | RNVC: 2
92-060-1: RNCC: 5 | RNVC: 9
4655-1: RNCC: 5 | RNVC: 9
3183550: RNCC: 5 | RNVC: 9
3183550: RNCC: 7 | RNVC: 2

11 May 1972

5975-00-097-9462
Stuffing Tube

000979462
CGBS4018: RNCC: 3 | RNVC: 2

24 May 1968

5975-00-097-8742
Electrical Equipment Shelf

000978742
777-8503-002: RNCC: 3 | RNVC: 9

11 Mar 1972

5975-00-097-8743
Electrical Equipment Drawer

000978743
777-8503-001: RNCC: 3 | RNVC: 9

11 Mar 1972

5975-00-097-6282
Rigid Metal Conduit

000976282
012-20-000-11: RNCC: 3 | RNVC: 2
GA800GV40: RNCC: 5 | RNVC: 2

22 May 1968

5975-00-097-3215
Hickory Pole

000973215
71-635: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-097-3214
Pole Pike

000973214
SCD656: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-097-0173
Stuffing Tube

000970173
M19622-6-002: RNCC: 2 | RNVC: 2
MILS19622-6: RNCC: 4 | RNVC: 1

13 Dec 1972

5975-00-096-2719
Junction Box

000962719
M24142-5-003-5R: RNCC: 2 | RNVC: 1
MS17848PC2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-095-3751
Conduit Sleeve

000953751
202B292-13: RNCC: 3 | RNVC: 2
2122-7790-002: RNCC: 7 | RNVC: 2

8 Dec 1972

5975-00-093-8196
Electrical Equipment Mounting Base

000938196
6725-10A: RNCC: 3 | RNVC: 2
240511: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-093-6401
Plate Assembly

000936401
30737: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-092-8861
Strain Relief

000928861
3200-2: RNCC: 3 | RNVC: 9
3200-2: RNCC: 5 | RNVC: 2

3 Dec 1972

5975-00-092-5040
Cable Hanger

000925040
8B: RNCC: 3 | RNVC: 2

24 Nov 1972

5975-00-091-5843
Housing

000915843
103468: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-091-1068
Electrical Equipment Mounting Base

000911068
111-0004: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-091-0482
Electrical Equipment Rack

000910482
MT1145APA74: RNCC: 3 | RNVC: 2
1753: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-089-9660
Junction Bloc Cover

000899660
209-075-118-1: RNCC: 3 | RNVC: 2

9 Aug 1967

5975-00-089-8553
Electrical-Electronic Equipment Panel

000898553
K663130201: RNCC: 3 | RNVC: 9

29 Jul 1967

5975-00-089-8378
Chassis Base

000898378
SM-C-619600: RNCC: 3 | RNVC: 2
836697-802: RNCC: 5 | RNVC: 2
SM-C-619600: RNCC: 5 | RNVC: 9
SM-C-619600: RNCC: C | RNVC: 1

27 Jul 1967

5975-00-089-7581
Electrical Cable Splice Protector

000897581
20B3: RNCC: 3 | RNVC: 9

13 Jul 1967

5975-00-089-6991
Duct Fitting

000896991
345: RNCC: 3 | RNVC: 2

7 Jul 1967

5975-00-089-3905
Cable Collar

000893905
SMC603160-1: RNCC: 3 | RNVC: 2
S214-100: RNCC: 5 | RNVC: 2
556007-001: RNCC: 5 | RNVC: 2

6 Jun 1967

5975-00-089-2682
Junction Box Cover

000892682
3K11351-107: RNCC: 3 | RNVC: 2
3K11351-107: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-088-5959
Electrical-Electronic Equipment Chassis

000885959
3321-832: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-088-5127
Electrical Cable Nipple

000885127
32YELL0W: RNCC: 3 | RNVC: 2
413327-14: RNCC: 7 | RNVC: 2

29 Dec 1967

5975-00-087-9414
Raceway Vertical Riser

000879414
B0M4563: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9402
Duct 8In Sq Elbow

000879402
B0M4554: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9415
Duct Tee

000879415
CAT NO. 4564: RNCC: 3 | RNVC: 9
B0M4564: RNCC: 5 | RNVC: 9
LDBWS00866AD000: RNCC: D | RNVC: 9

16 May 1967

5975-00-087-9401
Sq Cross Duct 8In

000879401
B0M4553: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9403
Duct 8In Sq R-Ins

000879403
B0M4555: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-6640
Electrical Conductor Bushing

000876640
1199900667: RNCC: 3 | RNVC: 9
5223-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-087-1025
Cable Terminal Chamber

000871025
ST26PSC: RNCC: 3 | RNVC: 9

15 Apr 1967

5975-00-087-0099
Cable Hanger

000870099
CL7KR: RNCC: 3 | RNVC: 2

6 Apr 1967

5975-00-085-4527
Electrical Equipment Mounting Base

000854527
800014P1: RNCC: 3 | RNVC: 2
SK18630: RNCC: 5 | RNVC: 9
125005: RNCC: 5 | RNVC: 9
125005: RNCC: 5 | RNVC: 9
MT-2553/ALQ-51: RNCC: 5 | RNVC: 9
A2BA-C2D-E40TPYE: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-084-8704
Rigid Metal Conduit

000848704
32-75035-4: RNCC: 3 | RNVC: 2
32-75035-4: RNCC: 5 | RNVC: 2
32-75035-4: RNCC: 5 | RNVC: 2
32-75035-4: RNCC: 5 | RNVC: 2

22 Nov 1972

5975-00-084-5264
Metallic Raceway

000845264
RD41: RNCC: 3 | RNVC: 2
RD41: RNCC: 5 | RNVC: 9

15 Dec 1967

5975-00-084-4536
Electrical Equipment Drawer

000844536
25-22037-77: RNCC: 3 | RNVC: 2

22 Nov 1972

5975-00-084-1928
Electrical Equipment Mounting Base

000841928
840-22: RNCC: 3 | RNVC: 9

15 Dec 1967

5975-00-084-1925
Electrical Equipment Mounting Base

000841925
831-160: RNCC: 3 | RNVC: 9
15535: RNCC: 5 | RNVC: 1
AOLA-B1B-A10: RNCC: 5 | RNVC: 2
831-164: RNCC: 5 | RNVC: 9
AOLA-B1B-A10: RNCC: 5 | RNVC: 9

15 Dec 1967

5975-00-084-1927
Electrical Equipment Mounting Base

000841927
831-281: RNCC: 3 | RNVC: 9

15 Dec 1967

5975-00-081-4852
Box Vaportight Plug

000814852
V12: RNCC: 3 | RNVC: 9
02096: RNCC: 5 | RNVC: 9

8 Dec 1967

5975-00-081-4803
Electrical Entrance Cap

000814803
404: RNCC: 3 | RNVC: 2
404: RNCC: 5 | RNVC: 9

8 Dec 1967

5975-00-079-9028
Plug Boot

000799028
2965285: RNCC: 3 | RNVC: 2

6 Dec 1967

5975-00-079-4312
Conduit Outlet

000794312
AA50563-101ALRLB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
TYPE I DESIGN 1 STYLE LT: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-078-9117
Cable Clamp

000789117
338-802572: RNCC: 3 | RNVC: 2
338-802572: RNCC: 5 | RNVC: 9

7 Aug 1967

5975-00-078-6999
Electrical-Electronic Equipment Chassis

000786999
139039-01: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-078-4336
Rim Clinching Clamp

000784336
56095-1170SH: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-078-3891
Electrical-Electronic Equipment Chassis

000783891
SC-D-160375: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-078-3755
Rim Clinching Clamp

000783755
56095-1320SH: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-078-3342
Fuel Tank B Conduit

000783342
7445343-888: RNCC: 3 | RNVC: 2

5 Aug 1967

5975-00-078-3343
Fuel Tank B Conduit

000783343
7445343-889: RNCC: 3 | RNVC: 2

5 Aug 1967

5975-00-078-2948
Ground Rod

000782948
CP12-30: RNCC: 3 | RNVC: 2

11 Aug 1967

5975-00-078-2715
Interconnecting Box

000782715
717671-803: RNCC: 3 | RNVC: 2
J2826APM293A: RNCC: 5 | RNVC: 1

10 Dec 1971

5975-00-077-9055
Blank Panel

000779055
89-821082-1: RNCC: 3 | RNVC: 9

6 Nov 1971

5975-00-077-4802
Com Dead End Sleeve

000774802
91-162J: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-076-5709
Blank Panel

000765709
118222: RNCC: 3 | RNVC: 2
5428443003: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-076-2503
Blank Panel

000762503
LS4174-10: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-076-1647
Electrical Nonmetallic Conduit Assembly

000761647
EXLK-14: RNCC: 3 | RNVC: 2
ECLK14: RNCC: 3 | RNVC: 2

5 Aug 1967

5975-00-076-0155
Electrical Equipment Rack Base

000760155
173861: RNCC: 3 | RNVC: 2
173861: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-075-0466
Flexible Metal Conduit Assembly

000750466
ECGJH336: RNCC: 3 | RNVC: 2
EXGJH-336: RNCC: 5 | RNVC: 2
ECF-336: RNCC: 5 | RNVC: 2
ECGJH-100.36: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-075-0450
Electrical Nonmetallic Conduit Assembly

000750450
ECLK221: RNCC: 3 | RNVC: 2

2 Aug 1967

5975-00-074-1738
Junction Box Cover

000741738
3K11374-105: RNCC: 3 | RNVC: 2
3K11374-101: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-073-8734
Electrical Grounding Plate

000738734
AD4378370-1: RNCC: 3 | RNVC: 9
554-6937-002: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-073-7109
Clamp

000737109
PP151: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-073-4207
Bracket

000734207
650-52045-1: RNCC: 3 | RNVC: 2
TC106: RNCC: 5 | RNVC: 2
650-52045: RNCC: 5 | RNVC: 2
13211E6985: RNCC: 5 | RNVC: 2
332-823: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-072-6020
Electrical-Electronic Equipment Chassis

000726020
546-0857-003: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-072-6010
Electrical-Electronic Equipment Chassis

000726010
543-2058-002: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-071-6918
Ground Rod Assembly

000716918
L656715-5: RNCC: 3 | RNVC: 2
L656715-5: RNCC: 5 | RNVC: 9

18 Jul 1967

5975-00-071-6851
Electrical Cable Protector

000716851
502AS2224: RNCC: 3 | RNVC: 2

19 May 1972

5975-00-070-9553
Ial Junction As Coa

000709553
2315425G1: RNCC: 3 | RNVC: 2
2315425G1REVC: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-070-8331
Cable Collar

000708331
357-9405-000: RNCC: 3 | RNVC: 2
21300: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-070-5987
Electrical Equipment Mounting Base

000705987
687D968G1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-070-4884
Electrical Equipment Mounting Base

000704884
30489: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-070-1808
Electrical Equipment Mounting Base

000701808
20551-1: RNCC: 3 | RNVC: 2
20551-1A: RNCC: 3 | RNVC: 2
40169: RNCC: 7 | RNVC: 9

22 Jul 1967

5975-00-070-1036
Electrical Equipment Rack

000701036
H871206-1: RNCC: 3 | RNVC: 9

13 Jul 1967

5975-00-070-0982
Transmission Line Grounding Set

000700982
4816: RNCC: 3 | RNVC: 9

13 Jul 1967

5975-00-070-0979
Line Shield

000700979
0R150-6: RNCC: 3 | RNVC: 2

13 Jul 1967

5975-00-070-0978
Line Connector

000700978
0R150-45C: RNCC: 3 | RNVC: 2

13 Jul 1967

5975-00-070-0980
Electrical Shield

000700980
0R150-6C: RNCC: 3 | RNVC: 2

13 Jul 1967

5975-00-070-0976
Electrical C Shield

000700976
0R150-3C: RNCC: 3 | RNVC: 2

13 Jul 1967

5975-00-070-0609
Electrical Cable Support

000700609
9091-509A: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-069-8779
Electrical Equipment Cabinet

000698779
CY2555GT: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-069-5270
Electrical Conduit Coupling

000695270
ICC208: RNCC: 3 | RNVC: 2
ICP200: RNCC: 3 | RNVC: 9

18 Jul 1967

5975-00-069-3512
Electrical-Electronic Equipment Chassis

000693512
SM-D-683687: RNCC: 3 | RNVC: 2

2 Feb 1972

5975-00-069-3088
Electrical Equipment Mounting Base

000693088
585904-101: RNCC: 3 | RNVC: 9
MT3965ASW27: RNCC: 5 | RNVC: 1
585904-100: RNCC: 5 | RNVC: 9
585904-101: RNCC: C | RNVC: 1

18 Jan 1972

5975-00-068-7925
Junction Box

000687925
12X12X10: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-068-6323
Electrical-Electronic Equipment Chassis

000686323
A3017288: RNCC: 3 | RNVC: 2
SMD651941: RNCC: 5 | RNVC: 2

12 Dec 1971

5975-00-068-6330
Electrical-Electronic Equipment Chassis

000686330
SMD651624: RNCC: 3 | RNVC: 2

22 Dec 1971

5975-00-068-6331
Electrical-Electronic Equipment Chassis

000686331
SM-D-651630: RNCC: 3 | RNVC: 2

12 Dec 1971

5975-00-068-6260
Cable Electri Clamp

000686260
SMB587351-2: RNCC: 3 | RNVC: 2
SMB587351-2: RNCC: 5 | RNVC: 1

25 Aug 1972

5975-00-068-6266
Electrical Cable Nipple

000686266
SMB351106: RNCC: 3 | RNVC: 2
SMB351106: RNCC: 5 | RNVC: 2

21 Aug 1972

5975-00-068-5794
Electrical Conduit Elbow

000685794
HH90-51: RNCC: 3 | RNVC: 2
3501340: RNCC: 5 | RNVC: 9

27 May 1972

5975-00-067-5236
Electrical Equipment Rack Base

000675236
90721-2: RNCC: 3 | RNVC: 2
630932: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-067-3368
Electrical Components Tie Down Strap

000673368
758-1102-002: RNCC: 3 | RNVC: 9
758-1102-002: RNCC: 5 | RNVC: 9

29 Jun 1967

5975-00-066-5483
Electrical Conduit Union

000665483
679AL: RNCC: 3 | RNVC: 2
169AL: RNCC: 5 | RNVC: 9

13 Jul 1967

5975-00-065-3905
Strain Electrical Conductor Clamp

000653905
81500: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-064-5477
Electrical Standardized Components Case

000645477
CY2851GRC: RNCC: 3 | RNVC: 2
SMDL423900: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-063-9082
Electrical-Electronic Equipment Chassis

000639082
0002-3000: RNCC: 3 | RNVC: 2
CH670ARR75: RNCC: 5 | RNVC: 2

20 Oct 1971

5975-00-062-4490
Electrical Conduit Elbow

000624490
E1124-316-10: RNCC: 3 | RNVC: 2

17 Jun 1967

5975-00-061-5668
Cable Strain Relief Bushing

000615668
SR13-1: RNCC: 3 | RNVC: 2
11687497: RNCC: 5 | RNVC: 9

15 Jun 1967

5975-00-061-3053
Electrical Equipment Mounting Base

000613053
231E620G1: RNCC: 3 | RNVC: 2
231E620G1: RNCC: 5 | RNVC: 9
53-870067-9: RNCC: 7 | RNVC: 2

13 Jun 1967

5975-00-060-9858
Electrical-Electronic Equipment Chassis

000609858
2321-832: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-060-8063
Electronic Junction Rack

000608063
12: RNCC: 3 | RNVC: 2
C4883: RNCC: 5 | RNVC: 1

13 Jun 1967

5975-00-060-1875
Cable Hanger

000601875
897: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-058-5194
Conduit Outlet

000585194
LR448RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5204
Conduit Outlet

000585204
C28RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5221
Conduit Outlet

000585221
C18RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5176
Conduit Outlet

000585176
LR28RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5166
Conduit Outlet

000585166
LB68RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-2228
Electrical Conduit Nipple

000582228
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-057-9414
Electrical Conduit Bushing

000579414
WF408: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-056-4377
Crossarm Brace

000564377
J5138: RNCC: 3 | RNVC: 9
J5948: RNCC: 5 | RNVC: 9
J5948: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-056-2650
Box Junction

000562650
1849150: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-056-1855
Conduit Outlet Cover

000561855
RSMP5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-056-1658
End Duct Cover

000561658
LD6CP: RNCC: 3 | RNVC: 2
LD6CP: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-056-1340
Flexible Metal Conduit Assembly

000561340
2158-74: RNCC: 3 | RNVC: 2
ASP25-0187BB: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-055-8870
Electrical Components Tie Down Strap

000558870
17B13-3: RNCC: 3 | RNVC: 9
202-30800A13: RNCC: 5 | RNVC: 2

15 Dec 1967

5975-00-055-6044
Blank Panel

000556044
SMC446554: RNCC: 3 | RNVC: 2

3 Jan 1968

5975-00-054-7304
Conduit Outlet

000547304
LRL75TM: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-054-5287
Flexible Metal Conduit Assembly

000545287
FT834: RNCC: 3 | RNVC: 2
2143312-6: RNCC: 5 | RNVC: 2

23 May 1967

5975-00-054-2040
Junction Box

000542040
5921: RNCC: 3 | RNVC: 2

15 Dec 1967

5975-00-053-5267
Electrical Equipment Rack

000535267
12E134-5: RNCC: 3 | RNVC: 2
5800765-204000-000: RNCC: 5 | RNVC: 2
MT3092APX46: RNCC: 5 | RNVC: 2
112506: RNCC: 5 | RNVC: 2
01A236502: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-052-0762
Flexible Metal Conduit Assembly

000520762
EXGJH-215: RNCC: 3 | RNVC: 2
ECGJH215: RNCC: 5 | RNVC: 2

23 May 1967

5975-00-052-0749
Flexible Metal Conduit Assembly

000520749
ECLK218: RNCC: 3 | RNVC: 2

23 May 1967

5975-00-052-0754
Flexible Metal Conduit Assembly

000520754
ECLK24: RNCC: 3 | RNVC: 2
EXLK24: RNCC: 5 | RNVC: 2

23 May 1967

5975-00-051-5931
Blank Panel

000515931
MAP819: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-051-5934
Blank Panel

000515934
MAP1419: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-051-1711
Electrical-Electronic Equipment Chassis

000511711
553-0731-003: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-050-9938
Electrical Conduit Tee

000509938
70945: RNCC: 3 | RNVC: 2
70945: RNCC: 5 | RNVC: 9

16 May 1967

5975-00-050-6801
Electrical Components Tie Down Strap

000506801
M663120074: RNCC: 3 | RNVC: 9

11 May 1967

5975-00-045-9819
Electrical-Electronic Equipment Chassis

000459819
SC-D-52103: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-044-2101
Electrical Equipment Cabinet

000442101
583331: RNCC: 3 | RNVC: 9
583331: RNCC: C | RNVC: 1

6 May 1967

5975-00-044-2100
Electrical-Electronic Equipment Chassis

000442100
583327: RNCC: 3 | RNVC: 2
583327: RNCC: 5 | RNVC: 9

6 May 1967

5975-00-044-2069
Electrical-Electronic Equipment Chassis

000442069
583305: RNCC: 3 | RNVC: 2
583305: RNCC: 5 | RNVC: 9

6 May 1967

5975-00-043-5203
Blank Panel

000435203
661R486G01: RNCC: 3 | RNVC: 2
661R486H01: RNCC: 5 | RNVC: 2

6 May 1967

5975-00-043-0224
Electrical-Electronic Equipment Chassis

000430224
5825471-13: RNCC: 3 | RNVC: 2

6 May 1967

5975-00-043-0225
Electrical Equipment Mounting Base

000430225
5825471-17: RNCC: 3 | RNVC: 2

6 May 1967

5975-00-042-8092
Display Bezel

000428092
3009769G1: RNCC: 3 | RNVC: 2

15 May 1968

5975-00-042-7912
Blank Panel

000427912
9824444-9: RNCC: 3 | RNVC: 2

15 May 1968

5975-00-038-2356
Metallic Raceway

000382356
200: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-1141
Electrical Equipment Mounting Base

000381141
681110-2: RNCC: 3 | RNVC: 2
MT4375ASN92V: RNCC: 5 | RNVC: 1

10 Nov 1972

5975-00-037-8680
Electrical Equipment Rack

000378680
SA71040ABC: RNCC: 3 | RNVC: 9
SA71040ABC: RNCC: 5 | RNVC: 2

10 Nov 1972

5975-00-036-7266
Electrical-Electronic Equipment Chassis

000367266
504-7782-003: RNCC: 3 | RNVC: 9
504-7782-003: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-036-6755
Electrical Equipment Mounting Base

000366755
MT447APS31: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-036-6642
Electrical Equipment Mounting Base

000366642
MT-1075/ARC-27: RNCC: 3 | RNVC: 2
MT-1075/ARC-27: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-035-3724
Junction Box

000353724
14-28716-1: RNCC: 3 | RNVC: 9

3 Nov 1972

5975-00-034-7786
Cable Hanger

000347786
547-5284-002: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-033-7805
Electrical-Electronic Equipment Chassis

000337805
102677: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-032-0601
Nonmetalic Raceway Conduit

000320601
E4X4DG6: RNCC: 3 | RNVC: 2

28 Oct 1972

5975-00-030-8468
Broad Beam Sou Boot

000308468
5517215: RNCC: 3 | RNVC: 2
620680REVA: RNCC: 5 | RNVC: 9
620680REVB: RNCC: 5 | RNVC: 9
620680: RNCC: 5 | RNVC: 9

21 Oct 1972

5975-00-030-3026
Electrical Cable Protector

000303026
223: RNCC: 3 | RNVC: 2
SCB68425: RNCC: 5 | RNVC: 2
SC-B-68425: RNCC: 5 | RNVC: 2
13583: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-028-0122
Electrical Cable Nipple

000280122
R/C 6-8303: RNCC: 3 | RNVC: 2
568181: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-027-8298
Blank Panel

000278298
D21140BSIZECTANALUM: RNCC: 3 | RNVC: 2
PWHA12 3-16TAN: RNCC: 5 | RNVC: 2
D21140BSIZEC: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-027-8297
Blank Panel

000278297
D21140BSIZEDTANALUM: RNCC: 3 | RNVC: 2
PWHA13 3-16TAN: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-027-6969
Blank Panel

000276969
D21140BSIZEBTANALUM: RNCC: 3 | RNVC: 2
PWHA11 3-16TAN: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-026-8360
Stuffing Tube

000268360
325735PC2: RNCC: 3 | RNVC: 2
325735PC2: RNCC: 5 | RNVC: 2
325735PC2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-026-8143
Electrical Conduit Bushlock

000268143
323201PC9: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-025-0690
Junction Box

000250690
216223: RNCC: 3 | RNVC: 2
LD256769: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-025-0585
Stuffing Tube

000250585
325735PC1: RNCC: 3 | RNVC: 2
325735PC1: RNCC: 5 | RNVC: 2
325735PC1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-024-9887
Electrical-Electronic Equipment Chassis

000249887
208900: RNCC: 3 | RNVC: 2
208900: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-023-8987
Electrical-Electronic Equipment Chassis

000238987
451513: RNCC: 3 | RNVC: 2
481725: RNCC: 5 | RNVC: 2

29 Apr 1967

5975-00-023-1937
Electrical-Electronic Equipment Chassis

000231937
44920: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-022-4457
Electrical Conduit Tee

000224457
72246: RNCC: 3 | RNVC: 2
72246: RNCC: 5 | RNVC: 9

2 May 1967

5975-00-021-7127
Cable Hanger

000217127
NL900898-12: RNCC: 3 | RNVC: 9
NL900898-12: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-021-4519
Interconnecting Box Cover

000214519
914986-1: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-021-4178
Leg Button

000214178
38812: RNCC: 3 | RNVC: 9

10 May 1968

5975-00-019-8993
Flexible Metal Conduit Assembly

000198993
738785-02: RNCC: 3 | RNVC: 2

2 May 1967

5975-00-018-0814
Electrical Equipment Mounting Base

000180814
3K19110-101: RNCC: 3 | RNVC: 2

8 May 1968

5975-00-018-0815
Electrical Equipment Mounting Base

000180815
3K19110-103: RNCC: 3 | RNVC: 2

8 May 1968

5975-00-016-4138
Electric Cable Support

000164138
544-8655-002: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-010-9338
Electrical Conductor Bushing

000109338
547-5205-002: RNCC: 3 | RNVC: 2
547-5205-002: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-004-4981
Blank Panel

000044981
452846: RNCC: 3 | RNVC: 2

27 May 1972

5975-00-001-9329
Electrical Equipment Mounting Base

000019329
SMD747253: RNCC: 3 | RNVC: 2
MT4034U: RNCC: 5 | RNVC: 2

7 Oct 1972

5975-00-001-7345
Cable Collar

000017345
012-24-000-11: RNCC: 3 | RNVC: 2
GA800GV48: RNCC: 5 | RNVC: 2

29 Sep 1972

5975-00-001-1397
Interconnecting Box

000011397
91-340181-5: RNCC: 3 | RNVC: 9
91-340181-5: RNCC: C | RNVC: 1

24 Sep 1972

5975-14-440-2778
Fonc Chassis/Tiroir

144402778
23157025-00: RNCC: 3 | RNVC: 2
23157025-7: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-15-232-0094
Modulo St/St Nero

152320094
PUICMSTBL: RNCC: 3 | RNVC: 2
597515E140347: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-15-219-6441
Nordik C 35/14 Bian

152196441
VOR60770: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-461-1362
Equipemen Bati/Baie

144611362
51171740005: RNCC: 3 | RNVC: 2

24 Feb 1993

5975-14-483-4127
Equipemen Bati/Baie

5975-15-143-4275
Supporto Living P/U

151434275
4740: RNCC: 3 | RNVC: 2
TCN4740: RNCC: 3 | RNVC: 2

11 Dec 1996

5975-66-122-4914
Inside/Outsid Elbow

5975-14-462-1460
Equipemen Bati/Baie

144621460
4653557A: RNCC: 3 | RNVC: 2
62RR036L0640A: RNCC: 6 | RNVC: 9

7 Apr 1993

5975-15-221-3793
Tassello C/Vite D.8

152213793
FSS8VP: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-439-6447
Fonc Chassis/Tiroir

144396447
23178878-9: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-416-2430
Equipemen Bati/Baie

5975-15-231-7894
Supporto Pt/M8 Zf

152317894
UT/SA/0009/14: RNCC: 3 | RNVC: 2
597515E116911: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-15-216-0325
Copriforo S/Blanc -

152160325
45913: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-25-129-9749
Topp-/Bunn Ramme

5975-14-439-6466
Fonc Chassis/Tiroir

144396466
23178056-9: RNCC: 3 | RNVC: 2

16 May 1990

5975-15-209-9023
Prolunga Svga M/M D

152099023
PROL4M: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-459-4223
Equipemen Bati/Baie

144594223
100A107622A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-27-055-7936
Buat/Kofra

270557936
4588560001: RNCC: 2 | RNVC: 2
DCA1191: RNCC: 2 | RNVC: 2

5 Jan 2012

5975-15-218-2137
Box Vka 8/Sid C-160

152182137
BOXVKA8SID: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-461-3469
Equipemen Bati/Baie

144613469
29553588: RNCC: 3 | RNVC: 2

9 Mar 1993

5975-14-439-6470
Fonc Chassis/Tiroir

144396470
23178488-5: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-460-6354
Equipemen Bati/Baie

144606354
46108755: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-440-2653
Fonc Chassis/Tiroir

144402653
35-605-501: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-460-0068
Equipemen Bati/Baie

144600068
45111712: RNCC: 3 | RNVC: 2

7 Jan 1993

5975-14-488-5862
Anneau/Manchon

144885862
382948: RNCC: 3 | RNVC: 2

21 May 1997

5975-99-891-7424
Idm To V/Uhf Mounti

998917424
SAOEU/SEM/JAG/174/006: RNCC: 3 | RNVC: 2
ZDM-006: RNCC: 5 | RNVC: 2
031TR-002: RNCC: 6 | RNVC: 9

19 May 2003

5975-15-170-1686
Ppi/Rhi Chassis I

151701686
AWSK760D287: RNCC: 3 | RNVC: 2

12 Nov 2002

5975-14-459-4245
Equipemen Bati/Baie

144594245
104A103430A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-14-439-6457
Fonc Chassis/Tiroir

144396457
23178069-2: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-475-8581
Station Manu/Auto

144758581
141548: RNCC: 3 | RNVC: 2
427: RNCC: 3 | RNVC: 2

10 May 1995

5975-15-176-7148
Minicanale Tmc 40/2

151767148
IBO00605: RNCC: 3 | RNVC: 2

14 Feb 2004

5975-17-122-6951
Measurement/Control

171226951
RM3 UA112MU7: RNCC: 3 | RNVC: 9
RM3 UA112MU7: RNCC: 5 | RNVC: 2

25 Nov 2009

5975-99-425-1688
Arm-Retaining R/H

994251688
FV2081170: RNCC: 3 | RNVC: 2
FV2081170: RNCC: 5 | RNVC: 2

30 May 1992

5975-15-167-5593
Deviazione A 90/Dx

151675593
07613: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-15-211-8299
Canala Tmu-W 22/1X1

152118299
09608: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-461-3976
Equipemen Bati/Baie

144613976
N500871J: RNCC: 3 | RNVC: 2

10 Mar 1993

5975-15-195-6015
Fld/Aux Regulator B

151956015
A8199050: RNCC: 3 | RNVC: 2
(241)A9217A8199050: RNCC: 5 | RNVC: 2

8 Apr 2011

5975-15-231-8138
Passacavi 3/4

152318138
OMO4748000: RNCC: 3 | RNVC: 2
597515E117673: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-15-167-5588
Deviazione A 90/15

151675588
07593: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-15-220-6302
Cassetta C/Pareti L

152206302
460X380X180MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-459-4244
Equipemen Bati/Baie

144594244
104A103428A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-14-439-6448
Fonc Chassis/Tiroir

144396448
23178065-0: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-459-2986
Equipemen Bati/Baie

144592986
R02804-01-1000: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-460-6513
Equipemen Bati/Baie

144606513
46050093: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-461-1360
Equipemen Bati/Baie

144611360
51171740006: RNCC: 3 | RNVC: 2

24 Feb 1993

5975-14-460-6314
Equipemen Bati/Baie

144606314
45686481: RNCC: 3 | RNVC: 2
RS-OF62: RNCC: 5 | RNVC: 2

4 Feb 1993

5975-17-112-4776
Am/Rm Rek

171124776
NT9P42: RNCC: 3 | RNVC: 2
NT9P42: RNCC: 5 | RNVC: 2

11 Mar 1999

5975-99-751-5018
Vehicle/ Fishplate

997515018
FV2228505: RNCC: 3 | RNVC: 2

8 Dec 1999

5975-13-118-7371
A/C Grounding Cable

131187371
APX13409987-501: RNCC: 3 | RNVC: 2
APX13409987-501: RNCC: 3 | RNVC: 2

14 Aug 2003

5975-14-460-7025
Equipemen Bati/Baie

144607025
CC890036T4: RNCC: 3 | RNVC: 2
45057322: RNCC: 5 | RNVC: 2
CC890036T4: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-14-460-7007
Equipemen Bati/Baie

144607007
16962543: RNCC: 3 | RNVC: 2
16962543: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-66-122-4911
Inside/Outsi Elbow

661224911
B4-75X75: RNCC: 3 | RNVC: 2

2 Nov 1984

5975-14-439-6472
Fonc Chassis/Tiroir

144396472
23192918-7: RNCC: 3 | RNVC: 2

16 May 1990

5975-66-122-4913
Inside/Outsid Elbow

5975-15-231-8139
Passacavi 3/8 Gas

152318139
OMO4749000: RNCC: 3 | RNVC: 2
597515E117675: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-99-788-1277
Grooved W/S Adaptor

997881277
B75387: RNCC: 1 | RNVC: 2
201M918-19A: RNCC: 3 | RNVC: 1
39IZ: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-14-459-4233
Equipemen Bati/Baie

144594233
102A103428A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-15-219-7204
Supp.C/Griffe X Sca

152197204
LEG072842: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-439-6471
Fonc Chassis/Tiroir

144396471
23193039-1: RNCC: 3 | RNVC: 2

16 May 1990

5975-14-460-6313
Equipemen Bati/Baie

144606313
45686480: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-15-210-3052
Ghiera Passo Gas 3/

152103052
6006-34: RNCC: 3 | RNVC: 2

16 Nov 2005

5975-14-460-6358
Equipemen Bati/Baie

144606358
45686355: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-459-7985
Equipemen Bati/Baie

144597985
29561923: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-14-439-6450
Fonc Chassis/Tiroir

144396450
23158168-00: RNCC: 3 | RNVC: 2
23158168-0: RNCC: 5 | RNVC: 2

16 May 1990

5975-14-441-1459
Equipemen Bati/Baie

5975-14-462-1464
Equipemen Bati/Baie

144621464
4653558A: RNCC: 3 | RNVC: 2
62EC023L1002A: RNCC: 6 | RNVC: 9

7 Apr 1993

5975-14-459-4235
Equipemen Bati/Baie

144594235
102A103430A: RNCC: 3 | RNVC: 2

26 Nov 1992

5975-15-148-9658
Input/Output Box

151489658
600-4052-001: RNCC: 3 | RNVC: 2

9 Nov 1998

5975-14-518-9443
Equipemen Bati/Baie

5975-15-139-6785
Basetta Met3 4P/3Sl

151396785
920-0211/03: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-440-2648
Fonc Chassis/Tiroir

144402648
35-605-250: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-15-174-7336
Input/Output Box

151747336
825-4031-001: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-14-461-3409
Equipemen Bati/Baie

144613409
20225267: RNCC: 3 | RNVC: 2

9 Mar 1993

5975-15-214-2799
Tassello C/Vite Da

152142799
0274: RNCC: 5 | RNVC: 3

16 Nov 2005

5975-14-460-6512
Equipemen Bati/Baie

144606512
46050092: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-439-6461
Fonc Chassis/Tiroir

144396461
23195089-3: RNCC: 3 | RNVC: 2
23178075-9: RNCC: 5 | RNVC: 2

16 May 1990

5975-15-230-9662
Pannello 1 U. C/5 A

152309662
FT19-CABLG.: RNCC: 3 | RNVC: 2
597515E116335: RNCC: 5 | RNVC: 9

19 Jul 2007

5975-14-439-6465
Fonc Chassis/Tiroir

144396465
23158596-00: RNCC: 3 | RNVC: 2
23158596-4: RNCC: 5 | RNVC: 2

16 May 1990

Load More Results