What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 193 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 193of 491

5975-00-338-4285
Flexible Metal Conduit Assembly

003384285
6876140: RNCC: 3 | RNVC: 2
6780189: RNCC: 5 | RNVC: 2
6780189: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-338-4287
Flexible Metal Conduit Assembly

003384287
6780191: RNCC: 3 | RNVC: 2
6780191: RNCC: 5 | RNVC: 2
6876156: RNCC: 5 | RNVC: 9
6780191: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-338-3946
Electrical Equipment Mounting Base

003383946
MT822CARC27: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-338-2733
Transfer Pad

003382733
10914-307: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-338-1706
Electrical Equipment Mounting Base

003381706
MT1208APX7: RNCC: 3 | RNVC: 2
2050189-1: RNCC: 5 | RNVC: 2
2050189-1: RNCC: 5 | RNVC: 2
831-55: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-337-8795
Blank Panel

003378795
016-0155-00: RNCC: 3 | RNVC: 2

28 Dec 1973

5975-00-337-7802
Nonmetalic Raceway Conduit

003377802
10C1-3-8: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-337-4162
Electrical Equipment Mounting Base

003374162
995-74: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-336-3074
Electrical Equipment Mounting Base

003363074
109827-01: RNCC: 3 | RNVC: 2
109827-01: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-333-9866
Electrical Equipment Mounting Base

003339866
51D13674-3: RNCC: 3 | RNVC: 2
MT238CARC: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-333-2749
Electrical-Electronic Equipment Chassis

003332749
504-7528-003: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-333-0895
Electrical-Electronic Equipment Chassis

003330895
322719: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-332-5679
Switch Terminal Cover

003325679
5PA1: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-332-2516
Rigid Nonmetallic Conduit

003322516
130-010-1: RNCC: 3 | RNVC: 2
205-030-113-3: RNCC: 5 | RNVC: 9

9 Dec 1973

5975-00-332-2520
Cover Assy Eng Jct

003322520
134AVP81004-3: RNCC: 3 | RNVC: 2

9 Dec 1973

5975-00-332-1732
Electrical-Electronic Equipment Chassis

003321732
415660: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-331-7061
Electrical-Electronic Equipment Chassis

003317061
124217: RNCC: 3 | RNVC: 2
124217: RNCC: 3 | RNVC: 9

16 Dec 1973

5975-00-331-3043
Strain Electrical Conductor Clamp

003313043
SMB587351-3: RNCC: 3 | RNVC: 2

16 Dec 1973

5975-00-329-3610
Electrical-Electronic Equipment Chassis

003293610
4006644: RNCC: 3 | RNVC: 2

9 Dec 1973

5975-00-329-2465
Electrical Grounding Plate

003292465
97139-28: RNCC: 3 | RNVC: 2
97139-28: RNCC: 3 | RNVC: 9
715339-28: RNCC: 5 | RNVC: 9
715339-28: RNCC: 5 | RNVC: 9
715339-28: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-328-6349
Electrical Equipment Leg

003286349
9089416: RNCC: 3 | RNVC: 2
9089416: RNCC: 5 | RNVC: 2
9089416: RNCC: 5 | RNVC: 2
9089416: RNCC: 5 | RNVC: 2
9089416: RNCC: 5 | RNVC: 2
9089416: RNCC: 5 | RNVC: 2
9089416: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-327-6728
Interconnecting Box

003276728
J3DSM100: RNCC: 3 | RNVC: 2

16 Dec 1973

5975-00-327-6713
Interconnecting Box

003276713
J1DSM99: RNCC: 3 | RNVC: 2
J1DSM99: RNCC: 5 | RNVC: 1

9 Dec 1973

5975-00-327-6715
Interconnecting Box

003276715
J1ARM136: RNCC: 3 | RNVC: 2

9 Dec 1973

5975-00-327-6719
Interconnecting Box

003276719
J5DSM100: RNCC: 3 | RNVC: 2

16 Dec 1973

5975-00-327-6711
Interconnecting Box

003276711
J1DSM100: RNCC: 3 | RNVC: 2

16 Dec 1973

5975-00-327-6714
Interconnecting Box

003276714
J2ARM136: RNCC: 3 | RNVC: 2

16 Dec 1973

5975-00-327-6712
Interconnecting Box

003276712
J3ARM136: RNCC: 3 | RNVC: 2

9 Dec 1973

5975-00-327-4898
Chassis Base

003274898
505-0880-002: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-327-4477
Electrical Equipment Rack Base

003274477
MT1576G: RNCC: 3 | RNVC: 2
SC-DL-195181A: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-325-3566
Mounting Tray Assembly

003253566
35-30057-2: RNCC: 3 | RNVC: 2

28 Nov 1973

5975-00-325-3559
Mounting Tray Assembly

003253559
35-30057-1: RNCC: 3 | RNVC: 2

28 Nov 1973

5975-00-325-3108
Tubing Fitting Junction

003253108
B3265: RNCC: 3 | RNVC: 2

22 Mar 1971

5975-00-325-2363
Grounding Plate

003252363
505-1914-002: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-325-1981
Blank Panel

003251981
158279: RNCC: 3 | RNVC: 2
158279: RNCC: 5 | RNVC: 9
158279: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-325-1964
Blank Panel

003251964
158195: RNCC: 3 | RNVC: 2
158195: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-324-2070
Mounting Panel

003242070
K7112898-1: RNCC: 3 | RNVC: 2
B654035-1: RNCC: 3 | RNVC: 9
B654035-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-322-9865
Electrical Conduit Ferrule

003229865
322-9865: RNCC: 3 | RNVC: 9
SC6Z3817: RNCC: 5 | RNVC: 2
01-0029: RNCC: 5 | RNVC: 2
5975003229865: RNCC: 5 | RNVC: 9
5975003229865: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-322-9362
Conduit Outlet Cover

003229362
JBK75: RNCC: 3 | RNVC: 2

24 Nov 1973

5975-00-322-8184
Flexible Metal Conduit Assembly

003228184
8105412: RNCC: 3 | RNVC: 2
GN13: RNCC: 5 | RNVC: 9
GN13: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-321-8818
Guy Clamp

003218818
4999: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-321-8817
Strain Electrical Conductor Clamp

003218817
5149: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-318-4623
Electrical Equipment Cabinet

003184623
P7708635PT1: RNCC: 3 | RNVC: 2
P7708635PT1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-317-5499
Interconnecting Box

003175499
J2DSM100: RNCC: 3 | RNVC: 2

28 Nov 1973

5975-00-317-5501
Interconnecting Box

003175501
J5DSM99: RNCC: 3 | RNVC: 2

28 Nov 1973

5975-00-317-4783
End Fitting

003174783
2182A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-317-4769
Drum Clamp

003174769
505 5676 002: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-317-3770
Cable Rac Protector

003173770
P68616: RNCC: 3 | RNVC: 2
P68616: RNCC: 3 | RNVC: 9
P68616: RNCC: 5 | RNVC: 9
P68616: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-317-2973
Conduit Outlet Cover

003172973
2773: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-317-2899
Flexible Metal Conduit Assembly

003172899
S2397-1109: RNCC: 3 | RNVC: 2
S1863-1109: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-316-2357
Pothead

003162357
T3705B: RNCC: 3 | RNVC: 2

11 Nov 1973

5975-00-316-2336
End Blank

003162336
1780: RNCC: 3 | RNVC: 9
579R651HD5: RNCC: 5 | RNVC: 9
1780: RNCC: 5 | RNVC: 9
579R651H05: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-316-2291
Electrical Equipment Cabinet

003162291
CU463: RNCC: 3 | RNVC: 2

11 Nov 1973

5975-00-316-2252
Junction Box

003162252
AHE18X18X6: RNCC: 3 | RNVC: 2

11 Nov 1973

5975-00-316-2249
Junction Box

003162249
A-HE15X12X6: RNCC: 3 | RNVC: 2

11 Nov 1973

5975-00-315-8369
Chassis Base

003158369
7827: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-315-3325
Blank Panel

003153325
153117: RNCC: 3 | RNVC: 2
153117: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-315-3322
Blank Panel

003153322
153112: RNCC: 3 | RNVC: 2
153112: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-315-2329
Electrical Equipment Cabinet

003152329
RE23J250JALTJ: RNCC: 3 | RNVC: 2
614G: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-314-9623
Electrical Equipment Mounting Base

003149623
280484: RNCC: 3 | RNVC: 2

7 Nov 1973

5975-00-314-7719
Hanger Rod Support

003147719
804-002-988: RNCC: 3 | RNVC: 2
804-002-988: RNCC: 3 | RNVC: 9
P400298: RNCC: 5 | RNVC: 9
804-002-988: RNCC: 5 | RNVC: 9
P400298: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-314-1667
Stuffing Tube Packing Nut

003141667
CC4760: RNCC: 3 | RNVC: 9
CC4760: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-314-0931
Blank Panel

003140931
K7110786-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-314-0526
Special Conduit

003140526
1294311-101: RNCC: 3 | RNVC: 2

7 Nov 1973

5975-00-313-2294
Conduit Double Wye

003132294
6310-4-52: RNCC: 3 | RNVC: 2
GA800MG4: RNCC: 7 | RNVC: 2

2 Nov 1973

5975-00-312-1410
Interconnecting Box

003121410
J4ARM136: RNCC: 3 | RNVC: 2

31 Oct 1973

5975-00-312-0329
Electrical Equipment Mounting Base

003120329
6720-25116-3: RNCC: 3 | RNVC: 9

31 Oct 1973

5975-00-312-0327
Electrical Equipment Mounting Base

003120327
6720-25116-1: RNCC: 3 | RNVC: 9

31 Oct 1973

5975-00-311-6130
Junction Box

003116130
AHE8X6X4: RNCC: 3 | RNVC: 2

31 Oct 1973

5975-00-311-4730
Electrical-Electronic Equipment Chassis

003114730
T619137SUB2PT501: RNCC: 3 | RNVC: 9
T619137-501SUB2: RNCC: 5 | RNVC: 9
T619137SUB2PT501: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-309-5685
Clamp

003095685
267106-4 STYLE L6: RNCC: 3 | RNVC: 2
GC542A6: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-309-2752
Blank Panel

003092752
D76203: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-306-2311
Electrical Standardized Components Case

003062311
GS55114DRAWINGS0D63046: RNCC: 3 | RNVC: 2
GS55114DRAWINGS0D63046: RNCC: 5 | RNVC: 9
GS55114DRAWINGS0D63046: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-305-8740
Cover

003058740
SCB42383: RNCC: 3 | RNVC: 2
95G2051: RNCC: 3 | RNVC: 2
GC2014-2: RNCC: 5 | RNVC: 2
GC2014-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-305-4604
Interconnecting Box

003054604
BH361-10: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-305-2571
Electrical Equipment Cabinet

003052571
707861GP2: RNCC: 3 | RNVC: 2
MT685AARR26: RNCC: 5 | RNVC: 2
707861GP3: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-304-5019
Electrical Equipment Mounting Base

003045019
7855-1: RNCC: 3 | RNVC: 2
679997-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-304-4930
Electrical Conduit Locknut

003044930
105-AL: RNCC: 3 | RNVC: 9
145AL: RNCC: 5 | RNVC: 2
10704: RNCC: 5 | RNVC: 9
A-54: RNCC: 5 | RNVC: 9
155AL: RNCC: 5 | RNVC: 9

21 Oct 1973

5975-00-304-4340
Strain Relief

003044340
10684424-1: RNCC: 3 | RNVC: 2

17 Oct 1973

5975-00-303-6850
Electrical-Electronic Equipment Chassis

003036850
152801-01: RNCC: 3 | RNVC: 2

14 Oct 1973

5975-00-303-0339
Electrical Equipment Mounting Base

003030339
103324-01: RNCC: 3 | RNVC: 2
103324-01: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-302-8975
Electrical Equipment Mounting Base

003028975
1208552-101: RNCC: 3 | RNVC: 2

14 Oct 1973

5975-00-302-8117
Electrical Components Tie Down Strap

003028117
TYT635M0: RNCC: 3 | RNVC: 2

14 Oct 1973

5975-00-301-5762
Cable Collar

003015762
SM-B-150083: RNCC: 3 | RNVC: 2
293824: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-301-0086
Electrical Grounding Plate

003010086
C40023: RNCC: 3 | RNVC: 9
C40023: RNCC: 5 | RNVC: 9

3 Oct 1973

5975-00-300-1709
Metallic Raceway

003001709
RD65: RNCC: 3 | RNVC: 1

12 Oct 1973

5975-00-299-1202
Interior Cable Rack

002991202
10112379: RNCC: 3 | RNVC: 2

19 Jan 1968

5975-00-297-3940
Electrical Grounding Plate

002973940
6870094-1: RNCC: 3 | RNVC: 2

3 Oct 1973

5975-00-296-9942
Electrical Conduit Coupling Nut

002969942
A25812: RNCC: 3 | RNVC: 2
A25812: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-9949
Electrical Conduit Coupling Nut

002969949
A24106: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-9426
Junction Box

002969426
TYPEA: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-296-4761
Junction Box

002964761
MIL-T-24558/30: RNCC: 4 | RNVC: 1
9000S6202-74182: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-4755
Junction Box

002964755
9000S6202-74149: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-4633
Electrical Grounding Plate

002964633
VG2874: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-4579
Metallic Raceway

002964579
1700: RNCC: 3 | RNVC: 9
579R651H02: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-3333
Flexible Metal Conduit Assembly

002963333
50038-712: RNCC: 3 | RNVC: 2
HT0712AA: RNCC: 3 | RNVC: 2
3002-712: RNCC: 3 | RNVC: 2
S2206-713: RNCC: 5 | RNVC: 2
S2206-712: RNCC: 5 | RNVC: 2
HT0712AA: RNCC: 5 | RNVC: 9
HT0715AA: RNCC: 5 | RNVC: 9
50038-712: RNCC: 5 | RNVC: 9
S202-712: RNCC: 5 | RNVC: 9
E1199-484-0712: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-296-3325
Flexible Metal Conduit Assembly

002963325
E1199-484-0904: RNCC: 3 | RNVC: 2
HT0904AA: RNCC: 3 | RNVC: 2
2206-905: RNCC: 5 | RNVC: 2
S2206-904: RNCC: 5 | RNVC: 2
S2206-905: RNCC: 5 | RNVC: 2
50038-0904: RNCC: 5 | RNVC: 2
HT0904AA: RNCC: 5 | RNVC: 2
50038-0904: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-3261
Blank Panel

002963261
K7110668PT1: RNCC: 3 | RNVC: 2
B654007PT1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-2869
Conduit Outlet

002962869
GUAL24: RNCC: 3 | RNVC: 2
VTLR-22: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-2201
Blank Panel

002962201
A16226: RNCC: 3 | RNVC: 9

8 Mar 1967

5975-00-296-2036
Flexible Metal Conduit Assembly

002962036
6876158: RNCC: 3 | RNVC: 2
6780197: RNCC: 5 | RNVC: 2
6876158: RNCC: 5 | RNVC: 9
6780197: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-2009
Blank Panel

002962009
B654040-1: RNCC: 3 | RNVC: 2
K7112992PT1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-1500
Electrical Conduit Adapter

002961500
443: RNCC: 3 | RNVC: 2
1153: RNCC: 5 | RNVC: 9
CB-125: RNCC: 5 | RNVC: 9
178: RNCC: 5 | RNVC: 9
68: RNCC: 5 | RNVC: 9
RCC-125: RNCC: 5 | RNVC: 9
1555: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-1300
Junction Box

002961300
MILJ24142-5-002: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-296-0807
Conduit Outlet

002960807
GUFT26: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-296-0799
Electrical Cable Nipple

002960799
7614997: RNCC: 3 | RNVC: 2
B0708077: RNCC: 5 | RNVC: 9
B0708077: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-0696
Flexible Metal Conduit

002960696
198-0750: RNCC: 3 | RNVC: 2
C198-0750: RNCC: 5 | RNVC: 9
019800-HP0750: RNCC: 5 | RNVC: 9
198-0750: RNCC: 5 | RNVC: 9
C198-0750: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-0730
Flexible Metal Conduit Assembly

002960730
2206-1012: RNCC: 3 | RNVC: 2

30 May 1974

5975-00-296-0638
Junction Box

002960638
EE672-1: RNCC: 3 | RNVC: 2
EE672-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-0468
Electrical Conduit Elbow

002960468
A27087: RNCC: 3 | RNVC: 2
24735: RNCC: 5 | RNVC: 2
27087: RNCC: 5 | RNVC: 2
1124-287-10: RNCC: 5 | RNVC: 2
E1124-287-10: RNCC: 5 | RNVC: 2
1124-287-10: RNCC: 5 | RNVC: 9
E1124-287-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-0395
Electrical Conduit Elbow

002960395
AN3062-16: RNCC: 2 | RNVC: 2

1 Jan 1960

5975-00-296-0285
Stuffing Tube

002960285
1483: RNCC: 3 | RNVC: 2
1483: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-0091
Electrical Equipment Cabinet

002960091
CY7390FSC: RNCC: 3 | RNVC: 2
DR7700DWG64563D: RNCC: 5 | RNVC: 9

28 Sep 1973

5975-00-295-9757
Electrical Conduit Adapter

002959757
RE86: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-295-9711
Electrical Conduit Coupling Nut

002959711
118-22C8: RNCC: 3 | RNVC: 2
118-22C8: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-295-9713
Electrical Conduit Coupling Nut

002959713
118-22B6: RNCC: 3 | RNVC: 2
118-22B6: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-295-9632
Electrical Conduit Coupling Nut

002959632
118-22B8: RNCC: 3 | RNVC: 2
118-22B8: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-295-9449
Electrical Cable Nipple

002959449
7574: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-295-9442
Flexible Metal Conduit Assembly

002959442
2206-1014: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-295-9336
Flexible Metal Conduit Assembly

002959336
S1624-2008: RNCC: 3 | RNVC: 2
1199-403-2008: RNCC: 5 | RNVC: 2
1199-403-2008: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-9324
Electrical Conduit Coupling Nut

002959324
AN3054-40: RNCC: 2 | RNVC: 2
A-2208-40: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-295-8897
Blank Panel

002958897
PX1127: RNCC: 3 | RNVC: 9
FNA2091: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-8806
Conduit Outlet

002958806
AA50563-207ALLRA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSR-1-50: RNCC: 5 | RNVC: 1
FSR1: RNCC: 5 | RNVC: 1
FSR-50: RNCC: 5 | RNVC: 9
TYPE II DESIGN 7 FORM 1 STYLE LR: RNCC: 5 | RNVC: 9
FSR1: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-8712
Electrical Conduit Nipple

1 Jan 1963

5975-00-295-8257
Flexible Metal Conduit Assembly

002958257
S2397-912: RNCC: 3 | RNVC: 2
S2397-915: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-3586
Electrical-Electronic Equipment Panel

002953586
114D1343G1: RNCC: 3 | RNVC: 2

22 Sep 1973

5975-00-293-3995
Electrical Conduit Elbow

002933995
AN3104-3: RNCC: 2 | RNVC: 2
710919: RNCC: 5 | RNVC: 1
A38980: RNCC: 5 | RNVC: 1
E1124-171-10: RNCC: 5 | RNVC: 1
710919: RNCC: 5 | RNVC: 9
E1124-171-10: RNCC: 5 | RNVC: 9
7725: RNCC: 5 | RNVC: 9
626724: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-285-8003
Electrical Cable Protector

002858003
1312210-1: RNCC: 3 | RNVC: 2

9 Sep 1973

5975-00-285-0302
Electrical Cable Protector

002850302
50540-2: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-284-9336
Stuffing Tube Packing Nut

002849336
M24235-14-061: RNCC: 2 | RNVC: 2
9S5235LPC2A: RNCC: 5 | RNVC: 1
9S5235LPC2: RNCC: 5 | RNVC: 9
329108-141: RNCC: 5 | RNVC: 9
5975PL0864153: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-284-9340
Stuffing Tube Packing Nut

002849340
329108-145: RNCC: 3 | RNVC: 2
329108-145: RNCC: 3 | RNVC: 9
9S5235LPC2: RNCC: 5 | RNVC: 1
9S5235PC2EE: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-284-9305
Electrical Cable Nipple

002849305
926025: RNCC: 3 | RNVC: 9
RM1523: RNCC: 5 | RNVC: 2
926025: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-9288
Electrical Conduit Union

002849288
10-40681-12: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-284-9043
Electrical Cable Nipple

002849043
H995: RNCC: 3 | RNVC: 2
5249060: RNCC: 3 | RNVC: 2
676895: RNCC: 5 | RNVC: 9
676895: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-8837
Junction Box Cover

002848837
2599: RNCC: 3 | RNVC: 2
101D: RNCC: 3 | RNVC: 2
W-J-800: RNCC: 4 | RNVC: 1
58C40: RNCC: 5 | RNVC: 9
128TYPE8SIZEWSTYLE73: RNCC: 5 | RNVC: 9
21K: RNCC: 5 | RNVC: 9
866: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-7872
Junction Box

002847872
560L: RNCC: 3 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-7467
Electrical Cable Nipple

002847467
490305: RNCC: 3 | RNVC: 2
490305: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-284-7341
Flexible Nonmetallic Conduit

002847341
ANSI UL3: RNCC: 3 | RNVC: 1
FLEXFLYTEL: RNCC: 5 | RNVC: 1
HHT791: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6942
Interior Cable Rack

002846942
79067: RNCC: 3 | RNVC: 2
5000: RNCC: 5 | RNVC: 1
2002-2: RNCC: 5 | RNVC: 1
9002-099: RNCC: 5 | RNVC: 9
D92273A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6459
Flexible Metal Conduit Assembly

002846459
159-54133-5: RNCC: 3 | RNVC: 2
159-54133-5: RNCC: 5 | RNVC: 2
159-54133-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6402
Interior Cable Rack

002846402
78121: RNCC: 3 | RNVC: 2
D92276A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6418
Electrical Conduit Coupling Nut

002846418
10-30299: RNCC: 3 | RNVC: 9
10-30299: RNCC: 5 | RNVC: 9
10-30299: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6282
Electrical Box Connector

002846282
AN3058-28: RNCC: 2 | RNVC: 2
9-2-28: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-284-6089
Ground Rod

002846089
SMB132347: RNCC: 3 | RNVC: 2
SMB132347B: RNCC: 5 | RNVC: 1
B3318-128: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-284-6072
Junction Box Cover

002846072
MT4238-040-006: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-284-4984
Flexible Metal Conduit Assembly

002844984
5-68251-7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-283-6686
Crossarm

002836686
C206-0179: RNCC: 3 | RNVC: 9

25 Aug 1973

5975-00-281-5587
Blank Panel

002815587
609-9343-001: RNCC: 3 | RNVC: 2

22 Aug 1973

5975-00-281-5407
Electrical Equipment Rack Base

002815407
91-7131400-00: RNCC: 3 | RNVC: 2
7131450-00: RNCC: 5 | RNVC: 9

22 Aug 1973

5975-00-281-0754
Electrical Conduit Nipple

002810754
ANSI UL514B: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-281-0572
Electrical Cable Nipple

002810572
588344PC17: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-281-0563
Electrical Cable Nipple

002810563
839771: RNCC: 3 | RNVC: 2
883602: RNCC: 3 | RNVC: 2
309503: RNCC: 3 | RNVC: 2
1839771: RNCC: 3 | RNVC: 2
5261952: RNCC: 3 | RNVC: 2
883602: RNCC: 5 | RNVC: 9
1839771: RNCC: 5 | RNVC: 9
309503: RNCC: 5 | RNVC: 9
309503: RNCC: 5 | RNVC: 9
839771: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-281-0557
Flexible Metal Conduit

002810557
C12-4: RNCC: 3 | RNVC: 2
S154-1264: RNCC: 5 | RNVC: 2
S154-1264: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-281-0553
Flexible Metal Conduit

002810553
6507276: RNCC: 3 | RNVC: 2
6527276: RNCC: 3 | RNVC: 2
6527276: RNCC: 5 | RNVC: 2
6507276: RNCC: 5 | RNVC: 2
177-0250: RNCC: 5 | RNVC: 2
177-0250: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-281-0099
Electrical Conduit Ferrule-Nut Coupling

002810099
A-25816: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-281-0066
Junction Box

002810066
ZT96-160A-48: RNCC: 3 | RNVC: 2
ZT96-160A-48: RNCC: 5 | RNVC: 2
MT1043-051-300: RNCC: 5 | RNVC: 9
ZT96-160A-48: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-281-0029
Electrical Cable Nipple

002810029
588344PC13: RNCC: 3 | RNVC: 2
T9071769PC13: RNCC: 5 | RNVC: 9
7030844P1: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-281-0021
Flexible Metal Conduit

002810021
S154-2064: RNCC: 3 | RNVC: 2
154-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9791
Electrical Conduit Ferrule

002809791
25822: RNCC: 3 | RNVC: 2
A25822: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-280-9781
Junction Box

002809781
MT1209-051-304: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-9775
Junction Box

002809775
ZT76-76A-46: RNCC: 3 | RNVC: 2
MT1321-064-228: RNCC: 5 | RNVC: 9
ZT76-76A-44: RNCC: 5 | RNVC: 9
ZT76-76A-44: RNCC: 5 | RNVC: 9
ZT76-76A-46: RNCC: 5 | RNVC: 9
ZT76-76A-68: RNCC: E | RNVC: 8
MT1321-063-321: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-280-9513
Electrical Conduit Wye

002809513
AN3250B1: RNCC: 2 | RNVC: 2
A24975: RNCC: 5 | RNVC: 1
AN3250B1: RNCC: 5 | RNVC: 1
148-3B0250: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-280-9218
Electrical Conduit Elbow

002809218
EL395: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-9213
Electrical Box Connector

002809213
AN3062-10: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-280-9183
Knockout Reducing Washer

002809183
1080: RNCC: 3 | RNVC: 9
1382: RNCC: 5 | RNVC: 1
WA-175: RNCC: 5 | RNVC: 1
1456-E: RNCC: 5 | RNVC: 9
RW-522: RNCC: 5 | RNVC: 9
13419: RNCC: 5 | RNVC: 9
RW-21: RNCC: 5 | RNVC: 9
705: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9188
Electrical Conduit Coupling Nut

002809188
AN3054-32: RNCC: 2 | RNVC: 2
A-1928-32: RNCC: 5 | RNVC: 1
118-22-32: RNCC: 5 | RNVC: 1
118-22-32: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9189
Electrical Conduit Coupling Nut

002809189
AN3054-28: RNCC: 2 | RNVC: 2
118-22-28: RNCC: 5 | RNVC: 1
118-22-28: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9000
Electrical Conduit Wye

002809000
AN3250DD2: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-280-8999
Electrical Conduit Wye

002808999
AN3250B2: RNCC: 2 | RNVC: 2
A24976: RNCC: 5 | RNVC: 1
148-6B0375: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-280-8568
Electrical Conduit Union

002808568
NTCC-150: RNCC: 3 | RNVC: 2
WF406: RNCC: 4 | RNVC: 1
1826: RNCC: 5 | RNVC: 2
HK-405: RNCC: 5 | RNVC: 2
1764: RNCC: 5 | RNVC: 9
30-150: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-8579
Cord Assembly Fastener

002808579
A10183: RNCC: 3 | RNVC: 2
94660: RNCC: 5 | RNVC: 9
SCB97884: RNCC: 5 | RNVC: 9
94660: RNCC: 5 | RNVC: 9
94660: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7938
Stuffing Tube Packing Nut

002807938
M24235-7-025: RNCC: 2 | RNVC: 2
MILS24235-7: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-7935
Stuffing Tube Packing Nut

002807935
9000S6202-73902REV2PC2: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-280-7928
Electrical Conduit Bondnut

002807928
5169559: RNCC: 3 | RNVC: 2
5169559: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7746
Electrical Conduit Locknut

002807746
79-1000: RNCC: 3 | RNVC: 2
79-1000: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-280-7542
Electrical Cable Nipple

002807542
BU-87-0: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-7538
Junction Box

002807538
UL-50: RNCC: 3 | RNVC: 1
ANSI UL50: RNCC: 3 | RNVC: 1
MIL-J-21978: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7535
Junction Box

002807535
ANSI-UL50: RNCC: 3 | RNVC: 1
ANSI UL50: RNCC: 3 | RNVC: 1
MIL-J-21978: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7534
Junction Box

002807534
UL-50: RNCC: 3 | RNVC: 1
MIL-J-21978: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7533
Junction Box

002807533
UL-50: RNCC: 3 | RNVC: 1
ANSI UL50: RNCC: 3 | RNVC: 1
MIL-J-21978: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7340
Electrical Box Connector

002807340
10-40695-171: RNCC: 3 | RNVC: 2
1756068: RNCC: 5 | RNVC: 2
1040695-171: RNCC: 5 | RNVC: 2
145915-171: RNCC: 5 | RNVC: 9
124568: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-7187
Junction Box Cover

002807187
RSS9: RNCC: 3 | RNVC: 2
480: RNCC: 3 | RNVC: 2
8360: RNCC: 3 | RNVC: 2
128TYPE8SIZEJSTYLE52: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-6052
Electrical Box Connector

002806052
2438: RNCC: 3 | RNVC: 2
AS 70319: RNCC: 5 | RNVC: 1
2438: RNCC: 5 | RNVC: 2
WT 6862-5: RNCC: 5 | RNVC: 2
P8455693P99: RNCC: 5 | RNVC: 2
SE-1003: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-4581
Electrical Conduit Adapter

002804581
C0U703: RNCC: 3 | RNVC: 9
1152: RNCC: 5 | RNVC: 9
RCC-100: RNCC: 5 | RNVC: 9
1554: RNCC: 5 | RNVC: 9
CB-100: RNCC: 5 | RNVC: 9
177: RNCC: 5 | RNVC: 9
67: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-4360
Junction Box

002804360
MT18361-064-124: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-4133
Conduit Outlet

002804133
AA50563-207BCCCB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSC222: RNCC: 5 | RNVC: 1
FSC-2-75: RNCC: 5 | RNVC: 1
FSC-72: RNCC: 5 | RNVC: 9
TYPE II DESIGN 7 FORM 5 STYLE C: RNCC: 5 | RNVC: 9
FSC222: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-4134
Conduit Outlet

002804134
AA50563-207BCCCA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSC12: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE II DESIGN 7 FORM 2 STYLE C: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3975
Blank Panel

002803975
RED2682337SIZEE: RNCC: 3 | RNVC: 2
B6867GR5: RNCC: 5 | RNVC: 9
2287926G1: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-280-3931
Conduit Outlet

002803931
CPS21282: RNCC: 3 | RNVC: 2
CPS21182: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-280-3814
Electrical Conductor Bushing

002803814
SCB85587: RNCC: 3 | RNVC: 2
B10465: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-280-3659
Electrical Conduit Ferrule

002803659
AN3053-4: RNCC: 2 | RNVC: 2
26-3-4: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-280-3570
Electrical Equipment Rack

002803570
TR3220: RNCC: 3 | RNVC: 2
9002-668: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3568
Electrical Equipment Rack

002803568
RR1364BT: RNCC: 3 | RNVC: 2
748-20: RNCC: 5 | RNVC: 2
RR195: RNCC: 5 | RNVC: 2
RR1364B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3456
Electrical Box Connector

002803456
AN3060-8: RNCC: 2 | RNVC: 2
22-10-8: RNCC: 5 | RNVC: 1
22-10-8: RNCC: 5 | RNVC: 9
37B4768-4: RNCC: 5 | RNVC: 9
LS963-8: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-280-3450
Electrical Box Connector

002803450
AN3060-10: RNCC: 2 | RNVC: 2
22-0625-5: RNCC: 5 | RNVC: 1
22-10-10: RNCC: 5 | RNVC: 1
22-0625-5: RNCC: 5 | RNVC: 9
22-10-10: RNCC: 5 | RNVC: 9
37B4768-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3212
Electrical Conduit Nipple

002803212
ANSI UL6: RNCC: 3 | RNVC: 1
1X2INLGSH0RT: RNCC: 5 | RNVC: 9
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-279-8693
Grounding Kit

002798693
40993-5: RNCC: 3 | RNVC: 2

10 Aug 1973

5975-00-279-3972
Special Conduit

002793972
1294302-101: RNCC: 3 | RNVC: 2
1294302-101: RNCC: 5 | RNVC: 2

12 Aug 1973

5975-00-278-7437
Rigid Nonmetallic Conduit

002787437
8347418-10: RNCC: 3 | RNVC: 2
5-96333-8: RNCC: 5 | RNVC: 2

8 Aug 1973

5975-00-276-7559
Cable Clamp

002767559
3539683: RNCC: 3 | RNVC: 2
3271456: RNCC: 5 | RNVC: 9
3539683: RNCC: 5 | RNVC: 9

8 Aug 1973

5975-00-276-3436
Rigid Nonmetallic Conduit

002763436
1294301-101: RNCC: 3 | RNVC: 2

10 Aug 1973

5975-00-275-1962
Flexible Nonmetallic Conduit

002751962
CVC2597-32-48: RNCC: 3 | RNVC: 2

8 Aug 1973

5975-00-274-5720
Electrical Box Connector

002745720
STN100: RNCC: 3 | RNVC: 2
5364: RNCC: 5 | RNVC: 2
CHQ-100: RNCC: 5 | RNVC: 9
CHQ-100: RNCC: 5 | RNVC: 9

28 Jul 1973

5975-00-272-2913
Flexible Metal Conduit

002722913
1294258-141: RNCC: 3 | RNVC: 2
1294258-141: RNCC: 5 | RNVC: 2

30 Jul 1973

5975-00-272-2903
Flexible Metal Conduit

002722903
1294258-149: RNCC: 3 | RNVC: 2
1294258-149: RNCC: 5 | RNVC: 9

30 Jul 1973

5975-00-272-2670
Flexible Metal Conduit

002722670
1294258-101: RNCC: 3 | RNVC: 2

30 Jul 1973

5975-00-271-0420
Electrical Conduit Bushing

002710420
6846260-1: RNCC: 3 | RNVC: 2

28 Jul 1973

5975-00-270-6759
Inner Conductor

002706759
S1994-0A057: RNCC: 3 | RNVC: 9

25 Jul 1973

5975-00-269-8391
Electrical Conduit Elbow

002698391
E1124-331-10: RNCC: 3 | RNVC: 2
018-1006-020: RNCC: 7 | RNVC: 2

28 Jul 1973

5975-00-269-3650
Electrical Conductor Bushing

002693650
1855383: RNCC: 3 | RNVC: 2
1855383: RNCC: 3 | RNVC: 9
1250: RNCC: 5 | RNVC: 1
1250N1PL: RNCC: 5 | RNVC: 1
250: RNCC: 5 | RNVC: 1
1250NIPL: RNCC: 5 | RNVC: 1
NA241724: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-268-3456
Junction Box Cover

002683456
SM-B-97206: RNCC: 3 | RNVC: 2
MS1374: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-267-8061
Conduit Outlet Cover

002678061
HS200: RNCC: 3 | RNVC: 2

18 Jul 1973

5975-00-267-2770
Fanning Strip

002672770
102D: RNCC: 3 | RNVC: 2
102D: RNCC: 3 | RNVC: 9
102D: RNCC: 5 | RNVC: 9
102D: RNCC: 5 | RNVC: 9
102D: RNCC: 5 | RNVC: 9
102D: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-267-2776
Electrical Conduit Coupling

002672776
97T075: RNCC: 3 | RNVC: 2
21201: RNCC: 5 | RNVC: 9
629-105: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-266-2018
Electrical Conduit Ferrule

002662018
2-1250P: RNCC: 3 | RNVC: 2
2-1250P: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-264-6734
Electrical-Electronic Equipment Chassis

002646734
AC-419: RNCC: 3 | RNVC: 2

8 Jul 1973

5975-00-264-4812
Electrical-Electronic Equipment Chassis

002644812
2137433G001: RNCC: 3 | RNVC: 2
8170-14G2: RNCC: 5 | RNVC: 2
8170-14G2: RNCC: 5 | RNVC: 9

13 Jul 1973

5975-00-263-3376
Conduit Outlet Cover

002633376
0L450: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-263-1759
Electrical Conduit Ferrule

002631759
AN3051-10: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-263-1095
Electrical Box Connector

002631095
AN3058-3: RNCC: 2 | RNVC: 2
9-2-3: RNCC: 5 | RNVC: 1
9-2-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-263-1093
Electrical Box Connector

002631093
AN3063-3: RNCC: 2 | RNVC: 2
1149-3: RNCC: 5 | RNVC: 1
213898-1: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-263-1101
Conduit Chase Nipple

002631101
AN3064-28: RNCC: 2 | RNVC: 2
900-90-28: RNCC: 5 | RNVC: 1
28-12-28: RNCC: 5 | RNVC: 1
GF803P28: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-263-0858
Junction Box

002630858
SCDL145202: RNCC: 3 | RNVC: 2
MILJ10172: RNCC: 4 | RNVC: 1
TA82FT: RNCC: 5 | RNVC: 2
H102: RNCC: 5 | RNVC: 2
H102: RNCC: 5 | RNVC: 9
H102: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-259-0267
Junction Box

002590267
1210112-101: RNCC: 3 | RNVC: 2
1210112-101: RNCC: 5 | RNVC: 9

4 Jul 1973

5975-00-257-2793
Ground Rod

002572793
390173-1: RNCC: 3 | RNVC: 2

19 Mar 1971

5975-00-256-9377
Electrical Box Connector

002569377
16576: RNCC: 3 | RNVC: 2
SCC16576GPIII: RNCC: 5 | RNVC: 2
SCD16576GR0UPIII: RNCC: 5 | RNVC: 2
65251: RNCC: 5 | RNVC: 2
1672902: RNCC: 5 | RNVC: 2
TJ129: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-256-5556
Electrical Equipment Rack

002565556
H871160-1: RNCC: 3 | RNVC: 9

24 Mar 1971

5975-00-256-3259
Cable Wedge

002563259
47M647ITEM1: RNCC: 3 | RNVC: 2
47M647ITEM1: RNCC: 3 | RNVC: 9
47P301ITEM1: RNCC: 5 | RNVC: 2
AT6783-1ITEM1: RNCC: 5 | RNVC: 9
AT6783-1ITEM1: RNCC: 5 | RNVC: 9
47M647ITEM1: RNCC: 5 | RNVC: 9
47P301ITEM1: RNCC: 5 | RNVC: 9
47P301ITEM1: RNCC: 5 | RNVC: 9
47M647ITEM1: RNCC: 5 | RNVC: 9
47P301ITEM1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-255-8778
Blank Panel

002558778
4005371: RNCC: 3 | RNVC: 2

20 Jun 1973

5975-00-255-8777
Blank Panel

002558777
4005124: RNCC: 3 | RNVC: 2

20 Jun 1973

5975-00-255-6022
Electrical Rosette

002556022
9880: RNCC: 3 | RNVC: 9
9065: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-255-2396
Conduit Outlet

002552396
E984F: RNCC: 3 | RNVC: 9
E984F: RNCC: 5 | RNVC: 2
E984F: RNCC: 5 | RNVC: 2
E20210: RNCC: 5 | RNVC: 9

24 Jun 1973

5975-00-255-2151
Electrical Conduit Elbow

002552151
E1124-377-10: RNCC: 3 | RNVC: 2

24 Jun 1973

5975-00-255-2116
Electrical Conduit Adapter

002552116
E1110-355B44: RNCC: 3 | RNVC: 2
018-1005-020: RNCC: 7 | RNVC: 2

24 Jun 1973

5975-00-255-2105
Stuffing Tube Adapter

002552105
M19622-15-0001: RNCC: 2 | RNVC: 2

20 Jun 1973

5975-00-254-7217
Electrical Box Connector

002547217
SCD16576GPII: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-253-4198
Electrical Conduit Coupling Nut

002534198
709132: RNCC: 3 | RNVC: 2
709132: RNCC: 5 | RNVC: 9
62281: RNCC: 5 | RNVC: 9

25 Jul 1969

5975-00-252-7447
Conduit Outlet

002527447
AA50563-101AXXXF: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
X67: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE I DESIGN 1 STYLE X: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-252-7321
Electrical Equipment Rack

002527321
719045-1: RNCC: 3 | RNVC: 2

18 Jun 1973

5975-00-252-7322
Electrical Equipment Rack

002527322
765326-1: RNCC: 3 | RNVC: 2

18 Jun 1973

5975-00-252-2777
Electrical Equipment Rack

002522777
SMC343630: RNCC: 3 | RNVC: 2
SMC343630: RNCC: 3 | RNVC: 2
SMC343630: RNCC: 5 | RNVC: 9

17 Jun 1970

5975-00-252-0582
Junction Box

002520582
A806CHNF: RNCC: 3 | RNVC: 2

13 Jun 1973

5975-00-250-7358
Electrical Equipment Mounting Base

002507358
793-6423-001: RNCC: 3 | RNVC: 9

12 Nov 1969

5975-00-250-6758
Electrical Conduit Ferrule

002506758
AN3051-16: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-250-6746
Electrical Conduit Ferrule

002506746
1110750-6: RNCC: 3 | RNVC: 2
11-1B6: RNCC: 3 | RNVC: 2
1110750-6: RNCC: 5 | RNVC: 9
11-1B6: RNCC: 5 | RNVC: 9
019-1561-030: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-250-6748
Electrical Conduit Ferrule

002506748
1110750-8: RNCC: 3 | RNVC: 2
11-1B8: RNCC: 5 | RNVC: 2
1110750-8: RNCC: 5 | RNVC: 9
11-1B8: RNCC: 5 | RNVC: 9
019-1561-040: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-250-6326
Electrical Conduit Ferrule

002506326
AN3050-20: RNCC: 2 | RNVC: 2
39B3335-10: RNCC: 5 | RNVC: 1
213018-10: RNCC: 5 | RNVC: 1
216985: RNCC: 5 | RNVC: 1
11-1250P: RNCC: 5 | RNVC: 1
111-1250P: RNCC: 5 | RNVC: 1
111-1250P: RNCC: 5 | RNVC: 9
11-1250P: RNCC: 5 | RNVC: 9
112719352: RNCC: 8 | RNVC: 2

1 Jan 1963

5975-00-250-6295
Interconnecting Box

002506295
SM-D-322483: RNCC: 3 | RNVC: 2
MILR11769: RNCC: 4 | RNVC: 1
JB60: RNCC: 5 | RNVC: 2
JB60A: RNCC: 5 | RNVC: 2
SC-DL-166915: RNCC: 5 | RNVC: 2
114X018: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-250-5047
Electrical Conductor Bushing

002505047
241724: RNCC: 3 | RNVC: 1
PL1976159 ITEM: RNCC: C | RNVC: 1

19 Nov 1969

5975-00-249-1216
Electrical-Electronic Equipment Chassis

002491216
6803-2015-1: RNCC: 3 | RNVC: 9
6803-2015-1: RNCC: 5 | RNVC: 2

14 Nov 1969

5975-00-248-9330
Hub Plate

002489330
R0H150: RNCC: 3 | RNVC: 2

7 Nov 1969

5975-00-248-5590
Electrical Conduit Coupling

002485590
202C221-10: RNCC: 3 | RNVC: 2
202C221-10: RNCC: 5 | RNVC: 2
202C221: RNCC: 5 | RNVC: 9
C2086: RNCC: 7 | RNVC: 2

14 Nov 1969

5975-00-248-5309
Electrical Conduit Ferrule

002485309
11-4B4: RNCC: 3 | RNVC: 2
11-4B4: RNCC: 5 | RNVC: 9
019-1561-330: RNCC: 5 | RNVC: 9

15 Jun 1973

5975-00-248-5253
Junction Box

002485253
ASE18X12X6: RNCC: 3 | RNVC: 2

29 Jun 1973

5975-00-248-2560
Electrical Equipment Rack

002482560
10548538: RNCC: 3 | RNVC: 2
10548538: RNCC: 5 | RNVC: 9
10548538: RNCC: 5 | RNVC: 9

9 Jun 1973

5975-00-248-2003
Electrical-Electronic Equipment Chassis

002482003
82-682321-1: RNCC: 3 | RNVC: 9

19 Feb 1969

5975-00-247-5062
Electrical Cable Protector

002475062
6532: RNCC: 3 | RNVC: 9
7532: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-247-5004
Electrical Conduit Ferrule

002475004
AN3052-8: RNCC: 2 | RNVC: 2
11-3-8: RNCC: 5 | RNVC: 1
11-3-8: RNCC: 5 | RNVC: 9
6005-1104-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-247-4991
Electrical Conduit Ferrule

002474991
AN3052-12: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-246-4005
Electrical Wall Plate

002464005
9183764: RNCC: 3 | RNVC: 2
3046BM0DIFIED: RNCC: 5 | RNVC: 9

14 Feb 1969

5975-00-246-4009
Negative Cable Clamp

002464009
11072465: RNCC: 3 | RNVC: 2

14 Feb 1969

5975-00-245-9626
Flexible Metal Conduit

002459626
A-A-55810-II10: RNCC: 2 | RNVC: 2
A-A-55810: RNCC: 4 | RNVC: 1
WWC566: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-245-2286
Junction Box

002452286
A24N20A: RNCC: 3 | RNVC: 2
A24N20ALP: RNCC: 3 | RNVC: 2

3 Jun 1973

5975-00-245-1727
Conduit Outlet

002451727
T217: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
6-1-1900-91A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1695
Conduit Outlet

002451695
LBH20: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-245-1681
Conduit Outlet

002451681
FD23: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-245-1666
Conduit Outlet

002451666
T87: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-244-2560
Electrical Equipment Mounting Base

002442560
3166050: RNCC: 3 | RNVC: 2
3166050: RNCC: 3 | RNVC: 9
MT3972AQS13A: RNCC: 5 | RNVC: 2

26 Feb 1969

5975-00-244-0706
Interconnecting Box

002440706
22-449: RNCC: 3 | RNVC: 2
SCD15907: RNCC: 3 | RNVC: 2
J85G: RNCC: 5 | RNVC: 2
SCDL21839B: RNCC: 5 | RNVC: 2
4028-839: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-243-5698
Electrical Conduit Coupling

002435698
AN3068-8: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-243-5194
Electrical Box Connector

002435194
SC-D-16576GPVI: RNCC: 3 | RNVC: 2
SCC16576GPV1: RNCC: 5 | RNVC: 2
SCC16576: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-243-3255
Electrical Conduit Adapter

002433255
MS39073-36-16: RNCC: 2 | RNVC: 2
AN3055-36-16: RNCC: 5 | RNVC: 1
245-8-1: RNCC: 5 | RNVC: 1
AN3055-36-16: RNCC: 5 | RNVC: 1
AN3055-36-16: RNCC: 5 | RNVC: 2
258-5363: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-243-3260
Electrical Conduit Coupling

002433260
AN3068-12: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-242-4917
Cable Compartment Cover

002424917
SCC42425: RNCC: 3 | RNVC: 2
SCD42424: RNCC: 5 | RNVC: 2
GA2991-12: RNCC: 5 | RNVC: 2
A34G2165: RNCC: 5 | RNVC: 2
GA2991-12: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-4807
Cable Hanger

002424807
AKJC3: RNCC: 3 | RNVC: 9

10 Mar 1971

5975-00-242-4624
Fanning Strip

002424624
S572105: RNCC: 3 | RNVC: 9
815: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-4626
Fanning Strip

002424626
S572103: RNCC: 3 | RNVC: 9

4 Aug 1983

5975-00-242-4625
Fanning Strip

002424625
S572104: RNCC: 3 | RNVC: 9

28 Jul 1983

5975-00-242-4239
Raceway Adapter

002424239
1517A: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-242-0906
Electrical Box Connector

002420906
6412-12-031-12: RNCC: 3 | RNVC: 2
5872-12-071-12: RNCC: 5 | RNVC: 9

28 May 1973

5975-00-241-9702
Straight Splice Plate

002419702
ASPST: RNCC: 3 | RNVC: 9

8 Mar 1971

5975-00-241-9698
Interior Cable Rack

002419698
A0V90-1808-6: RNCC: 3 | RNVC: 9

8 Mar 1971

5975-00-241-9697
Straight Splice Plate

002419697
ASPST6: RNCC: 3 | RNVC: 9

8 Mar 1971

5975-00-241-5412
Conduit Outlet

002415412
GEMX2: RNCC: 3 | RNVC: 1
GUAX24: RNCC: 3 | RNVC: 1
GRJX75: RNCC: 3 | RNVC: 2
GUAX24: RNCC: 5 | RNVC: 9

11 Jul 1969

5975-00-241-3650
Electrical Conduit Coupling

002413650
AN3058-32: RNCC: 2 | RNVC: 2
9-2-32: RNCC: 5 | RNVC: 1
9-2-32: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-4271
Electrical Box Connector

002404271
LS965-6: RNCC: 3 | RNVC: 2
28-12F6: RNCC: 5 | RNVC: 2
28-12F6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-4267
Electrical Conduit Adapter

002404267
AN3056-3: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-240-4269
Electrical Box Connector

002404269
28-12E4: RNCC: 3 | RNVC: 2
LS965-4: RNCC: 5 | RNVC: 2
28-12E4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2731
External Raceway Elbow

002402731
1518: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-240-2678
Electrical Box Connector

002402678
AN3060-16: RNCC: 2 | RNVC: 2
213026-8: RNCC: 5 | RNVC: 1
22-10-16: RNCC: 5 | RNVC: 1
22-10-16: RNCC: 5 | RNVC: 9
6026-8273-24: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2671
Electrical Conduit Elbow

002402671
AN3062-20: RNCC: 3 | RNVC: 2
3062-20: RNCC: 3 | RNVC: 2
37B4767-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2660
Electrical Box Connector

002402660
AN3060-6: RNCC: 2 | RNVC: 2
22-0375-5: RNCC: 5 | RNVC: 1
22-10-6: RNCC: 5 | RNVC: 1
22-10-6: RNCC: 5 | RNVC: 9
22-0375-6: RNCC: 5 | RNVC: 9
22-0375-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2658
Electrical Box Connector

002402658
188144-FB1200: RNCC: 3 | RNVC: 2
AN3060-4: RNCC: 5 | RNVC: 1
22-10-4: RNCC: 5 | RNVC: 9
22-10-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-239-9366
Electrical Cable Nipple

002399366
57339-507-1: RNCC: 3 | RNVC: 2
57339-507-1: RNCC: 3 | RNVC: 2

5 Nov 1969

5975-00-239-7347
Flexible Metal Conduit Assembly

002397347
C175R0750-1800-9999: RNCC: 3 | RNVC: 2
C175R0750-1800-9999: RNCC: 5 | RNVC: 9
7901042-49: RNCC: 7 | RNVC: 2
C175R-0750-1800-: RNCC: C | RNVC: 1

5 Nov 1969

5975-00-239-5571
Electrical Conduit Adapter

002395571
1450-24-061-15: RNCC: 3 | RNVC: 2
SC124: RNCC: 5 | RNVC: 1

9 Jun 1973

5975-00-239-5201
Electrical-Electronic Equipment Chassis

002395201
34-016802-04: RNCC: 3 | RNVC: 2
34-016802-04: RNCC: 3 | RNVC: 9

24 Dec 1971

5975-00-239-2364
Electrical Equipment Mounting Base

002392364
48249500010: RNCC: 3 | RNVC: 2

5 Nov 1969

5975-00-239-2087
Electrical Cable Clamp

002392087
1-4-4T140: RNCC: 3 | RNVC: 2

29 Oct 1969

5975-00-239-0352
Conduit Outlet

002390352
AA50563-101ALLRH: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LR87: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-238-6883
Insulator Pin

002386883
5002: RNCC: 3 | RNVC: 9
8005: RNCC: 5 | RNVC: 9
901: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-238-6567
Electrical Conduit Bushing

002386567
AA50553-3-1-Q-8-05-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
IGB1504: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9

13 Nov 1970

5975-00-238-4521
Pressure Se Bushing

002384521
32-76175-3: RNCC: 3 | RNVC: 2

28 Oct 1970

5975-00-238-4427
Electrical Equipment Mounting Base

002384427
SMD381028: RNCC: 3 | RNVC: 2

5 Jan 1972

5975-00-237-3527
Electrical Cable Nipple

002373527
370335: RNCC: 3 | RNVC: 2

28 Oct 1970

5975-00-236-8717
Chassis Base

002368717
16767488-001: RNCC: 3 | RNVC: 2
0N153042-001: RNCC: C | RNVC: 1

22 Dec 1971

5975-00-236-0841
Ground Rod

002360841
10553386: RNCC: 3 | RNVC: 2

30 Dec 1971

5975-00-235-5199
Flexible Metal Conduit Assembly

002355199
S1863-1300: RNCC: 3 | RNVC: 2

17 Jun 1966

5975-00-235-5108
Ground Clamp

002355108
3-TB: RNCC: 3 | RNVC: 2
3: RNCC: 5 | RNVC: 9
3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-235-2344
Outlet Housing Assy

002352344
947998-101: RNCC: 3 | RNVC: 2
947998-101: RNCC: 5 | RNVC: 2

23 Jun 1969

5975-00-235-2157
Flexible Connector

002352157
31029-017-50: RNCC: 3 | RNVC: 2
590-129-08: RNCC: 5 | RNVC: 2

23 Jun 1969

5975-00-234-6768
Electrical Conduit Bushing

002346768
IGB3104: RNCC: 3 | RNVC: 9

25 Jun 1969

5975-00-234-6766
Electrical Conduit Bushing

002346766
IGB2004: RNCC: 3 | RNVC: 9

25 Jun 1969

5975-00-234-6732
Cable Reinforcing Link

002346732
MS39027-2: RNCC: 2 | RNVC: 2
8929: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-234-3877
Junction Box

002343877
A18R126: RNCC: 3 | RNVC: 2

3 Jun 1973

5975-00-234-3764
Guide Rail

002343764
2663294: RNCC: 3 | RNVC: 2

26 Oct 1970

5975-00-234-3660
Conflex Fitting

002343660
6400-09-081-15: RNCC: 3 | RNVC: 2

20 May 1973

5975-00-234-3419
Junction Box

002343419
WAB060604: RNCC: 3 | RNVC: 2

3 Jun 1973

5975-00-234-3413
Insulator Standoff Bracket

002343413
560-18: RNCC: 3 | RNVC: 2

20 May 1973

5975-00-234-2434
Electrical Box Connector

002342434
AN3063-16: RNCC: 2 | RNVC: 2
21-23-16: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-234-2432
Electrical Box Connector

002342432
AN3061-24: RNCC: 2 | RNVC: 2
3061-24: RNCC: 5 | RNVC: 1
22-12-24: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-234-2427
Electrical Box Connector

002342427
AN3061-4: RNCC: 2 | RNVC: 2
22-12-4: RNCC: 5 | RNVC: 1
188161-FB0000: RNCC: 5 | RNVC: 9
22-12-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-234-2411
Electrical Box Connector

002342411
AN3061-3: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-234-2413
Electrical Box Connector

002342413
AN3061-10: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-234-2392
Conduit Chase Nipple

002342392
LS965-12: RNCC: 3 | RNVC: 2
28-12E12: RNCC: 5 | RNVC: 2
LS965-12: RNCC: 5 | RNVC: 9
28-12E12: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-233-3830
Electrical Conductor Bushing

002333830
A240142: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-232-7647
Conduit Outlet

002327647
FS-2T-50: RNCC: 3 | RNVC: 2
FS17: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-231-5921
Electrical Conduit Adapter

002315921
AN3056-16: RNCC: 2 | RNVC: 2
34-4-16: RNCC: 5 | RNVC: 1
34-4-16: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-231-5916
Electrical Conduit Adapter

002315916
AN3055-40-20: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-231-4841
Rigid Metal Conduit Assembly

002314841
53-65018-17: RNCC: 3 | RNVC: 2

14 Oct 1970

5975-00-231-2985
Electrical Conduit Adapter

002312985
S694-4-10-37R: RNCC: 3 | RNVC: 2
533405-254: RNCC: 5 | RNVC: 2
S694-410-37R: RNCC: 5 | RNVC: 9
2221-10037-101: RNCC: 5 | RNVC: 9

28 Oct 1970

5975-00-231-1415
Cable Collar

002311415
10163439: RNCC: 3 | RNVC: 2

24 Dec 1971

5975-00-231-0247
Electrical Conduit Wye

002310247
6260-3-52: RNCC: 3 | RNVC: 2
GA800MF3: RNCC: 5 | RNVC: 2

24 Dec 1971

5975-00-231-0218
Electrical Conduit Wye

002310218
6260-4-52: RNCC: 3 | RNVC: 2
GA800MF4: RNCC: 5 | RNVC: 2

24 Dec 1971

5975-00-230-3754
Electrical Equipment Drawer

002303754
SME684510: RNCC: 3 | RNVC: 2

12 Oct 1970

5975-00-230-3756
Electrical Equipment Drawer

002303756
SME684508: RNCC: 3 | RNVC: 2

12 Oct 1970

5975-00-230-3755
Electrical Equipment Drawer

002303755
SME684509: RNCC: 3 | RNVC: 2

12 Oct 1970

5975-00-230-2944
Electrical Conduit Ferrule

002302944
BACT31A10: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-229-9593
Electrical Connector Parts Kit

002299593
54B6B6: RNCC: 3 | RNVC: 9
418948-1: RNCC: 5 | RNVC: 9

19 Dec 1971

5975-00-229-8976
Junction Box Extension

002298976
TP7174: RNCC: 3 | RNVC: 2
5405: RNCC: 5 | RNVC: 9

10 Mar 1971

5975-00-229-6627
Electrical-Electronic Equipment Panel

002296627
SMD414846: RNCC: 3 | RNVC: 2
5820002296627: RNCC: 5 | RNVC: 9
5820002296627: RNCC: 6 | RNVC: 9

12 Feb 1969

5975-00-229-5842
Storage Rack

002295842
9195092: RNCC: 3 | RNVC: 2

12 Feb 1969

5975-00-229-5777
Conduit Outlet

002295777
EABL26: RNCC: 3 | RNVC: 2
GRHL75: RNCC: 5 | RNVC: 2

17 May 1973

5975-00-229-0898
Rigid Metal Conduit Assembly

002290898
300-537053-71: RNCC: 3 | RNVC: 9

7 Feb 1969

5975-00-229-0895
Rigid Metal Conduit Assembly

002290895
300-537052-91: RNCC: 3 | RNVC: 9

7 Feb 1969

5975-00-229-0897
Rigid Metal Conduit Assembly

002290897
300-537053-61: RNCC: 3 | RNVC: 9

7 Feb 1969

5975-00-229-0872
Rigid Metal Conduit Assembly

002290872
300-537053-101: RNCC: 3 | RNVC: 9

7 Feb 1969

5975-00-228-9876
Hull Insert

002289876
SS302-2477255-1: RNCC: 3 | RNVC: 1
MX8208B: RNCC: 5 | RNVC: 1
MX8208BL1: RNCC: 5 | RNVC: 1
SS302-2477255-1L1: RNCC: 5 | RNVC: 2

7 Feb 1969

5975-00-228-8998
Rigid Metal Conduit

002288998
11581-120: RNCC: 3 | RNVC: 2

17 Feb 1969

5975-00-228-7967
Junction Box

002287967
GC102: RNCC: 3 | RNVC: 2
GC102: RNCC: 3 | RNVC: 9
TA80FT: RNCC: 5 | RNVC: 2
SCDL135565: RNCC: 5 | RNVC: 2
GC102: RNCC: 5 | RNVC: 9
GC102: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-228-6768
Blank Panel

002286768
6601: RNCC: 3 | RNVC: 2
B.M.P. ST601: RNCC: 5 | RNVC: 2
CP-001-023: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-228-6749
Blank Panel

002286749
MP5473A: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-228-6719
Blank Panel

002286719
7351: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-228-3869
Electrical Conduit End Seal Disk

002283869
WUK2A3: RNCC: 3 | RNVC: 9

5 Feb 1969

5975-00-228-0227
Panduct Cover

002280227
C4DG6: RNCC: 3 | RNVC: 2

3 Feb 1969

5975-00-226-3185
Electrical Equipment Mounting Base

002263185
128AB10810-3: RNCC: 3 | RNVC: 2
128AB10810-3: RNCC: 5 | RNVC: 9

3 Jan 1968

5975-00-226-2781
Fitting

002262781
S214-107: RNCC: 3 | RNVC: 2

3 Jan 1968

5975-00-224-9154
Electri Cable Cover

002249154
209-075-354-1: RNCC: 3 | RNVC: 2

18 Mar 1970

5975-00-224-8739
Electrical Equipment Cabinet

002248739
RHA6F41006: RNCC: 3 | RNVC: 2
41005: RNCC: 5 | RNVC: 2
110052-001: RNCC: 5 | RNVC: 2
CY6654FSA52V: RNCC: 5 | RNVC: 2
110052-001: RNCC: 5 | RNVC: 9
RHA6F41006: RNCC: 5 | RNVC: 9

27 Mar 1970

5975-00-224-8755
Electrical Equipment Cabinet

002248755
RHA6F41007: RNCC: 3 | RNVC: 2
CY6655FSA52V: RNCC: 5 | RNVC: 2
RHA6F41007: RNCC: 5 | RNVC: 9

27 Mar 1970

5975-00-224-7013
Crossarm Brace

002247013
ESA19511A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-224-6960
Electrical Equipment Mounting Base

002246960
MT299GR: RNCC: 3 | RNVC: 9
MT-299/GR: RNCC: 5 | RNVC: 2
MT299GR: RNCC: 5 | RNVC: 2
SCD40693ANDSCD40697: RNCC: 5 | RNVC: 9
MT299GR: RNCC: 5 | RNVC: 9
GA1979-14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-9863
Electrical Equipment Rack

002239863
SC-D-4294: RNCC: 3 | RNVC: 2
FM30: RNCC: 5 | RNVC: 2
FM30: RNCC: 5 | RNVC: 2
FM30: RNCC: 5 | RNVC: 9
FM30: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-9840
Electrical Equipment Cabinet

002239840
MILR10964A: RNCC: 2 | RNVC: 2
MT453AF: RNCC: 5 | RNVC: 1
SCD26167: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-223-8652
Bail Clamp

002238652
BC820: RNCC: 3 | RNVC: 9
BC820AGP: RNCC: 5 | RNVC: 9

16 Mar 1970

5975-00-223-8620
Junction Box Extension

002238620
53171 1-2 3-4: RNCC: 3 | RNVC: 2
53171 3/4: RNCC: C | RNVC: 1

25 Mar 1970

5975-00-223-7642
Electrical Box Connector

002237642
DBZM5722K: RNCC: 3 | RNVC: 2

11 May 1973

5975-00-223-7614
Electrical Box Connector

002237614
DB331116: RNCC: 3 | RNVC: 2

11 May 1973

5975-00-223-6994
Cable Marker Sleeve

002236994
10159118-7: RNCC: 3 | RNVC: 2

22 Dec 1971

5975-00-223-5191
Junction Box Cover

002235191
ZT48-60A-COT-5: RNCC: 3 | RNVC: 2
MT2006-040-010: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-3082
Blank Panel

002233082
TBPSF19-25-4: RNCC: 3 | RNVC: 2
5318-19-25: RNCC: 5 | RNVC: 9

5 Sep 1972

5975-00-223-3034
Electrical Equipment Cabinet

002233034
01D87863C01: RNCC: 3 | RNVC: 2

5 Sep 1972

5975-00-223-1852
Bridle Ring

002231852
MS39040-3: RNCC: 2 | RNVC: 2
MILH55053: RNCC: 5 | RNVC: 9
A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-1847
Cable Hanger

002231847
MS39026-2: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-223-1837
Cable Hanger

002231837
2D1STRING: RNCC: 3 | RNVC: 2
2D1STRING: RNCC: 3 | RNVC: 9
73813220: RNCC: 5 | RNVC: 2
2D1STRING: RNCC: 5 | RNVC: 9
D65245B: RNCC: 5 | RNVC: 9
24-875: RNCC: 5 | RNVC: 9
64B14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-222-4109
Electrical Equipment Mounting Base

002224109
136032-01: RNCC: 3 | RNVC: 2

18 Jun 1969

5975-00-222-3504
Electrical Conduit Ferrule

002223504
709099: RNCC: 3 | RNVC: 2
709099: RNCC: 5 | RNVC: 9
62229: RNCC: 5 | RNVC: 9

18 Jun 1969

5975-00-222-3516
Crimping-Inter Ring

002223516
709106: RNCC: 3 | RNVC: 2
709106: RNCC: 5 | RNVC: 9
62238: RNCC: 5 | RNVC: 9

18 Jun 1969

5975-00-222-3497
Cable Sleeve

002223497
149932: RNCC: 3 | RNVC: 2
149932: RNCC: 3 | RNVC: 9

18 Jun 1969

5975-00-221-2555
Electrical Equipment Mounting Base

002212555
SCD8529: RNCC: 3 | RNVC: 2
FM85: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-221-1016
Cable Hanger

002211016
DAVIDS0N2: RNCC: 3 | RNVC: 9
2020: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-221-0579
Electrical Box Connector

002210579
4784-14S: RNCC: 3 | RNVC: 2
4784-14S: RNCC: 3 | RNVC: 9
3G2: RNCC: 5 | RNVC: 2
3G2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-221-0572
Blank Panel

002210572
SCC26164-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-219-4254
Electrical Equipment Shelf

002194254
522-3510-124: RNCC: 3 | RNVC: 2

9 May 1973

5975-00-217-7049
Conduit Outlet

002177049
GUAN24: RNCC: 3 | RNVC: 2

11 May 1973

5975-00-216-4848
Electrical Conduit Coupling Nut

002164848
0092-16-091-12: RNCC: 3 | RNVC: 2

6 May 1973

5975-00-215-8571
Electrical Box Connector

002158571
CGFJ725S590: RNCC: 3 | RNVC: 2
710799-54: RNCC: 5 | RNVC: 2

6 May 1973

5975-00-215-4403
Junction Box

002154403
29C14: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-215-4288
Junction Box

002154288
9000S8106-73142ALT2: RNCC: 3 | RNVC: 2
9000S8106-73142: RNCC: 3 | RNVC: 2
9000S8106-73142: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-215-4291
Junction Box

002154291
9000S8106-73145ALT2: RNCC: 3 | RNVC: 2
9000S8106-73145: RNCC: 5 | RNVC: 2
C80A: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-215-4290
Junction Box

002154290
9000S8106-73144: RNCC: 3 | RNVC: 2
C78A: RNCC: 5 | RNVC: 2
9000S8106-73144ALT2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-214-1673
Electrical Conduit Adapter

002141673
10-40908-241: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-214-1534
Electrical Conduit Bushing

002141534
545-66: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-212-7754
Junction Box

002127754
143-100: RNCC: 3 | RNVC: 2
CL55S6202-210856: RNCC: 5 | RNVC: 1
0B16: RNCC: 5 | RNVC: 9
26-425-25: RNCC: 5 | RNVC: 9
272-25: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-212-6245
Electrical Bonding Ring

002126245
AN3111-1: RNCC: 2 | RNVC: 2
CA2250-1: RNCC: 5 | RNVC: 1
2250-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-211-6903
Flexible Metal Conduit Assembly

002116903
004704-5: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-211-6047
Electrical Box Connector

002116047
DBZM4714: RNCC: 3 | RNVC: 2

25 Apr 1973

5975-00-211-2803
Electrical Equipment Mounting Base

002112803
680771: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-209-6498
Electrical-Electronic Equipment Chassis

002096498
2928190G1: RNCC: 3 | RNVC: 2
2928190G1: RNCC: 5 | RNVC: 9

18 Apr 1973

5975-00-209-5884
Junction Box

002095884
D12740: RNCC: 3 | RNVC: 2
BHE665: RNCC: 5 | RNVC: 9
BHE665: RNCC: 5 | RNVC: 9
GUSC75032: RNCC: 5 | RNVC: 9

13 Apr 1973

5975-00-209-1428
Conduit Outlet

002091428
FDC222: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

15 Apr 1973

5975-00-209-1358
Conduit Outlet

002091358
TB27: RNCC: 3 | RNVC: 2
TB75G: RNCC: 5 | RNVC: 9
TB27: RNCC: 5 | RNVC: 9

15 Apr 1973

5975-00-207-9695
Interior Cable Rack

002079695
678504-0002: RNCC: 3 | RNVC: 2
678504-2: RNCC: 5 | RNVC: 9

13 Apr 1973

5975-00-203-7843
Cable Terminal Chamber

002037843
1222018: RNCC: 3 | RNVC: 2
1222018: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-203-7414
Cable Terminal Chamber

002037414
1222011: RNCC: 3 | RNVC: 9
1222011: RNCC: C | RNVC: 1

1 Jan 1961

5975-00-197-2048
Case

001972048
MS91403-A1B: RNCC: 2 | RNVC: 2

15 Jun 1970

5975-00-196-0698
Connector Strip

001960698
10219836-2: RNCC: 3 | RNVC: 2

21 Mar 1973

5975-00-195-1543
Electrical Conduit Union

001951543
UNL215: RNCC: 3 | RNVC: 2

18 Mar 1973

5975-00-194-9535
Knockout Reducing Washer

001949535
62: RNCC: 3 | RNVC: 2

12 Jun 1970

5975-00-194-8863
Junction Box

001948863
5734: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-194-8857
Junction Box

001948857
5719: RNCC: 3 | RNVC: 2
B3419: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-194-8131
Electrical Equipment Cabinet

001948131
SCD28023: RNCC: 3 | RNVC: 2
CY827GRC26: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-194-4957
Conduit Outlet Cover

001944957
GSKBC20: RNCC: 3 | RNVC: 2

8 Jun 1970

5975-00-194-3960
Junction Box

001943960
1128-1: RNCC: 3 | RNVC: 2
6026-1032-16: RNCC: 5 | RNVC: 9
6026-1035-14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-193-8925
Electrical Cable Cover

001938925
209-075-354-3: RNCC: 3 | RNVC: 2

9 Mar 1970

5975-00-193-8508
Conduit Outlet

001938508
GUAM24: RNCC: 3 | RNVC: 2

18 Mar 1970

5975-00-193-1399
Electrical Conductor Bushing

001931399
2684444: RNCC: 3 | RNVC: 2
253659-00: RNCC: 3 | RNVC: 2
2684444: RNCC: 3 | RNVC: 2

6 Mar 1970

5975-00-193-0023
Loom Nipple

001930023
60-1438-1: RNCC: 3 | RNVC: 2

6 Mar 1970

5975-00-192-9628
Dust And Moisture Seal Boot

001929628
1111-4: RNCC: 3 | RNVC: 2

11 Mar 1970

5975-00-192-7503
Cable Strain Relief Bushing

001927503
00180-41214: RNCC: 3 | RNVC: 2
00180-41214: RNCC: 3 | RNVC: 9
00180-41214: RNCC: 5 | RNVC: 9

17 Dec 1971

5975-00-191-2884
Junction Box

001912884
6600-00044: RNCC: 3 | RNVC: 9

1 Mar 1971

5975-00-190-2319
Conduit Special

001902319
75-01-0706: RNCC: 3 | RNVC: 9
75-01-0706: RNCC: C | RNVC: 1

7 Mar 1973

5975-00-190-2316
Electrical Housing

001902316
75-01-0705: RNCC: 3 | RNVC: 9
75-01-0705: RNCC: C | RNVC: 1

7 Mar 1973

5975-00-189-7849
Electrical Equipment Mounting Base

001897849
2065149-0501: RNCC: 3 | RNVC: 2

24 Feb 1971

5975-00-189-6035
Flexible Metal Conduit

001896035
C16-4: RNCC: 3 | RNVC: 2
S154-1664: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-189-6036
Flexible Metal Conduit

001896036
302058: RNCC: 3 | RNVC: 9
79427-4: RNCC: 5 | RNVC: 2
151-0250: RNCC: 5 | RNVC: 2
151-0250: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-188-7764
Electrical Equipment Cabinet

001887764
2397: RNCC: 3 | RNVC: 2
2397: RNCC: 5 | RNVC: 9

1 Mar 1971

5975-00-188-1153
Junction Box Cover

001881153
502B: RNCC: 3 | RNVC: 2
26L: RNCC: 5 | RNVC: 9
54C12: RNCC: 5 | RNVC: 9
54C12: RNCC: 5 | RNVC: 9
721: RNCC: 5 | RNVC: 9
FEDSTD128: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-187-7728
Reel Separator

001877728
WTV-B22785: RNCC: 3 | RNVC: 2
WTV-B22785: RNCC: 5 | RNVC: 2

8 Sep 1972

5975-00-187-5301
Ground Rod

001875301
26: RNCC: 3 | RNVC: 2
WSA4029: RNCC: 3 | RNVC: 2
SCB34149: RNCC: 3 | RNVC: 2
26: RNCC: 5 | RNVC: 9
WSA4029: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-187-3520
Electrical Equipment Leg Section

001873520
10246216: RNCC: 3 | RNVC: 2
35640: RNCC: 5 | RNVC: 2
10246216: RNCC: 5 | RNVC: 9

1 Sep 1972

5975-00-187-2841
Blank Panel

001872841
182912: RNCC: 3 | RNVC: 2
182912: RNCC: 5 | RNVC: 2
182912: RNCC: 5 | RNVC: 9
182912: RNCC: 5 | RNVC: 9

30 Aug 1972

5975-00-186-3968
Electrical Box Connector

001863968
RA6ANDDB4BANDDB4E: RNCC: 3 | RNVC: 2
54684: RNCC: 5 | RNVC: 2
54684: RNCC: 5 | RNVC: 9
54684: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-185-5243
Electrical Conduit Adapter

001855243
533405-294: RNCC: 3 | RNVC: 2
2221-18062-101: RNCC: 5 | RNVC: 2
S694-4-18-62R: RNCC: 5 | RNVC: 2
2121-18062-101: RNCC: 5 | RNVC: 9
21-21-18062-101: RNCC: 5 | RNVC: 9

22 Feb 1971

5975-00-185-0804
Spacer

001850804
640207: RNCC: 3 | RNVC: 2

12 Feb 1971

5975-00-185-0413
Electrical Box Connector

001850413
CGE3239: RNCC: 3 | RNVC: 2

12 Feb 1971

5975-00-183-6561
Harness Conduit Assembly

001836561
6876160: RNCC: 3 | RNVC: 2
6876160: RNCC: 5 | RNVC: 9

8 Sep 1972

5975-00-181-5825
Electrical Components Tie Down Strap

001815825
3068107-8: RNCC: 3 | RNVC: 2
3068107-8: RNCC: 5 | RNVC: 9

10 Dec 1971

5975-00-180-8251
Electrical-Electronic Equipment Chassis

001808251
618-7268-001: RNCC: 3 | RNVC: 2

7 Mar 1973

5975-00-179-8519
Blank Panel

001798519
SMB618565: RNCC: 3 | RNVC: 2
SMB614565: RNCC: 5 | RNVC: 2

18 Dec 1968

5975-00-179-4673
Electrical Conduit Adapter

001794673
CVC2599-32-28: RNCC: 3 | RNVC: 2

19 Mar 1969

5975-00-179-4601
Junction Box

001794601
Z59-120A32: RNCC: 3 | RNVC: 2
HE192-0001-0003: RNCC: 5 | RNVC: 9

25 Apr 1969

5975-00-179-4599
Tube Electrical Cap

001794599
3T: RNCC: 3 | RNVC: 2

28 Feb 1969

5975-00-179-4571
Electrical Equipment Mounting Base

001794571
369A6472: RNCC: 3 | RNVC: 2
369A6472: RNCC: 3 | RNVC: 9

14 Feb 1969

5975-00-179-4572
Electrical Equipment Mounting Base

001794572
369A6471: RNCC: 3 | RNVC: 2
369A6471: RNCC: 3 | RNVC: 9

14 Feb 1969

5975-00-179-4532
Assembly Clamp

001794532
4251779-501: RNCC: 3 | RNVC: 9

17 Jan 1969

5975-00-178-1528
Stuffing Tube

001781528
M24235/9-135: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1
5975PL1371200: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-178-0763
Stuffing Tube

001780763
M24235-10-13-1612: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-178-0770
Stuffing Tube

001780770
M24235-10-20-1619: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-178-0767
Stuffing Tube

001780767
9S5166LALT16TYPE30-2ASIZEV: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-178-0765
Stuffing Tube

001780765
M24235-10-15-1614: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-178-0764
Stuffing Tube

001780764
M24235/10-14: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-178-0768
Stuffing Tube

001780768
M24235-10-18: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1
9S5166LSYMB0L1617: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-178-0759
Stuffing Tube

001780759
M24235-10-09-1608: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-178-0756
Stuffing Tube

001780756
M24235-10-06: RNCC: 2 | RNVC: 2
MILS24235-10: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-178-0572
Stuffing Tube

001780572
M24235-13-006: RNCC: 2 | RNVC: 2
MILS24235-13: RNCC: 4 | RNVC: 1
17T10188: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-177-7979
Cable Strain Relief Bushing

001777979
9000S6202-73241ALT0TYPECSIZE1: RNCC: 3 | RNVC: 2
9000S6202-73241ALT0TYPECSIZE1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-177-6263
Stuffing Tube Packing Nut

001776263
1084213: RNCC: 3 | RNVC: 2

17 Dec 1971

5975-00-177-2957
Chassis Base

001772957
671355-101: RNCC: 3 | RNVC: 9
522-2489-009: RNCC: 5 | RNVC: 2
522-2489-009: RNCC: 7 | RNVC: 2
671355-101: RNCC: 7 | RNVC: 2

27 Oct 1969

5975-00-177-2146
Junction Box

001772146
SM-C-632311-2: RNCC: 3 | RNVC: 2

28 Dec 1970

5975-00-177-2133
Junction Box

001772133
SMC632311: RNCC: 3 | RNVC: 2

9 Nov 1970

5975-00-177-1983
Electrical Equipment Shelf

001771983
RSX-3C-18: RNCC: 3 | RNVC: 2
RSA3C18: RNCC: 5 | RNVC: 9
RS18A: RNCC: 5 | RNVC: 9
RSA3C18: RNCC: 5 | RNVC: 9

24 Jun 1970

5975-00-177-1931
Flexible Nonmetallic Conduit

001771931
17C18035-95: RNCC: 3 | RNVC: 2
5325989: RNCC: 5 | RNVC: 1
U L 3: RNCC: 5 | RNVC: 2
A325989F: RNCC: 5 | RNVC: 2
HHT791: RNCC: 5 | RNVC: 9
LOOM 7/16 ID: RNCC: 5 | RNVC: 9

4 Feb 1970

5975-00-177-1962
Blank Panel

001771962
CVC2538: RNCC: 1 | RNVC: 2
CVC2538-6: RNCC: 3 | RNVC: 2
CVC2538-6: RNCC: 3 | RNVC: 2
CVC2538-1: RNCC: 5 | RNVC: 9

11 Mar 1970

5975-00-177-1961
Blank Panel

001771961
CVC2538-18: RNCC: 3 | RNVC: 2

11 Mar 1970

5975-00-177-1960
Electrical Equipment Cabinet

001771960
CU3016A: RNCC: 3 | RNVC: 9

11 Mar 1970

5975-00-177-1935
Electrical Conduit Ferrule

001771935
MS25065-10: RNCC: 2 | RNVC: 2

19 Jan 1970

5975-00-177-1206
Electrical Equipment Rack

001771206
269680PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-177-0839
Electrical-Electronic Equipment Chassis

001770839
209730PC2: RNCC: 3 | RNVC: 2
209739PC2: RNCC: 5 | RNVC: 2
209739PC2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-177-0802
Electrical Equipment Rack Base

001770802
177970: RNCC: 3 | RNVC: 2
177970: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-177-0770
Electrical Equipment Rack

001770770
177941PC2: RNCC: 3 | RNVC: 9
177941PC2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-176-9028
Junction Box Cover

001769028
AA59214-8E52: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
404A: RNCC: 5 | RNVC: 1
52C18: RNCC: 5 | RNVC: 1
59066D41-115: RNCC: 5 | RNVC: 9
8470: RNCC: 5 | RNVC: 9
59066D41-115: RNCC: 5 | RNVC: 9
24K: RNCC: 5 | RNVC: 9
W-J-800: RNCC: 5 | RNVC: 9
779: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-176-1959
Electrical-Electronic Equipment Panel

001761959
134AV73011-5: RNCC: 3 | RNVC: 2
134AV73011-3: RNCC: 5 | RNVC: 9

3 Dec 1969

5975-00-176-1029
Blank Panel

001761029
50-364473-1: RNCC: 3 | RNVC: 9
50-364473-1: RNCC: C | RNVC: 1

22 Oct 1969

5975-00-176-0197
Electrical Equipment Mounting Base

001760197
0149-1-4002: RNCC: 3 | RNVC: 9
MT-4032/G: RNCC: 5 | RNVC: 2
MT412ANUNH16: RNCC: 5 | RNVC: 9
0123-1-4031: RNCC: 5 | RNVC: 9

8 Dec 1971

5975-00-175-9745
Shorting Bar Assembly

001759745
10697243: RNCC: 3 | RNVC: 2
10697243: RNCC: 5 | RNVC: 2
10697243: RNCC: 5 | RNVC: 2
10697243: RNCC: 5 | RNVC: 9
10697243: RNCC: 5 | RNVC: 9

15 Dec 1971

5975-00-175-6696
Conflex Fitting

001756696
6390-24-143-12: RNCC: 3 | RNVC: 2
GA800MJ16: RNCC: D | RNVC: 9

8 Dec 1971

5975-00-175-6693
Conflex Fitting

001756693
6390-06-353-12: RNCC: 3 | RNVC: 2
GA800MJ15: RNCC: D | RNVC: 9

8 Dec 1971

5975-00-175-6690
Conflex Fitting

001756690
6390-06-113-12: RNCC: 3 | RNVC: 2
GA800MJ26: RNCC: D | RNVC: 9

8 Dec 1971

5975-00-175-0586
Electrical Equipment Rack

001750586
209402PC7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-174-7860
Electrical Equipment Shelf

001747860
SS1918: RNCC: 3 | RNVC: 2

16 Feb 1973

5975-00-174-3475
Junction Box

001743475
20412: RNCC: 3 | RNVC: 9

18 Feb 1973

5975-00-174-1572
Electrical Cable Nipple

001741572
32RED: RNCC: 3 | RNVC: 1

18 Feb 1973

5975-00-172-3721
Hub

001723721
TC250: RNCC: 3 | RNVC: 2

25 Aug 1972

5975-00-172-3722
Electrical Components Tie Down Strap

001723722
TY5X: RNCC: 3 | RNVC: 2
TY505X: RNCC: 5 | RNVC: 2

1 Sep 1972

5975-00-172-3502
Electrical-Electronic Equipment Chassis

001723502
2983-2443-1: RNCC: 3 | RNVC: 9

18 Feb 1973

5975-00-172-3175
Junction Box

001723175
9239487-10: RNCC: 3 | RNVC: 2

23 Aug 1972

5975-00-172-0568
Junction Box Cover

001720568
6720-69081-5: RNCC: 3 | RNVC: 9

27 Aug 1972

5975-00-171-1344
Conduit Outlet Cover

001711344
206-BC: RNCC: 3 | RNVC: 2
206-BC: RNCC: 3 | RNVC: 9
S303: RNCC: 5 | RNVC: 9

27 Aug 1972

5975-00-169-9059
Electrical-Electronic Equipment Chassis

001699059
U535749: RNCC: 3 | RNVC: 2

25 Aug 1972

5975-00-169-9062
Electrical-Electronic Equipment Chassis

001699062
U535742: RNCC: 3 | RNVC: 2

25 Aug 1972

5975-00-169-8918
Junction Box

001698918
9413M97G01: RNCC: 3 | RNVC: 2

19 Aug 1972

5975-00-169-6415
Electrical Conduit Elbow

001696415
E1124-368-10: RNCC: 3 | RNVC: 2
018-1375-100: RNCC: 7 | RNVC: 2

25 Aug 1972

5975-00-169-6389
Radio Frequency Cable Splicing Kit

001696389
115GIRNH: RNCC: 3 | RNVC: 2

19 Aug 1972

5975-00-169-6324
Electrical Equipment Cabinet

001696324
CU3017A: RNCC: 3 | RNVC: 9

19 Aug 1972

5975-00-169-5044
Electrical Equipment Rack

001695044
A71031A: RNCC: 3 | RNVC: 9
A71031A: RNCC: 5 | RNVC: 2

20 Nov 1971

5975-00-169-5043
Electrical Equipment Rack

001695043
A71502: RNCC: 3 | RNVC: 9
A71502: RNCC: 5 | RNVC: 2

20 Nov 1971

5975-00-169-5042
Electrical Equipment Rack

001695042
A71502A: RNCC: 3 | RNVC: 9
A71502A: RNCC: 5 | RNVC: 2

20 Nov 1971

5975-00-169-5040
Electrical Equipment Rack

001695040
A71502C: RNCC: 3 | RNVC: 9
A71502C: RNCC: 5 | RNVC: 2

20 Nov 1971

5975-00-169-1401
Electrical Equipment Mounting Base

001691401
2732-00016: RNCC: 3 | RNVC: 2
2732-00016: RNCC: 5 | RNVC: 2

14 Dec 1970

Load More Results