What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 192 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 192of 491

5975-00-489-2607
Electrical Equipment Leg

004892607
SM-B-2016013: RNCC: 3 | RNVC: 2
24768: RNCC: 5 | RNVC: 9

28 May 1970

5975-00-489-1413
Insulator Pin

004891413
J608: RNCC: 3 | RNVC: 2

15 Oct 1972

5975-00-488-5482
Strain Relief Grip

004885482
073-03-1202: RNCC: 3 | RNVC: 9
BDSR50: RNCC: 5 | RNVC: 2
073-03-005: RNCC: 5 | RNVC: 9
301537-1: RNCC: 5 | RNVC: 9

15 May 1970

5975-00-488-4713
Electrical Conduit Adapter

004884713
533405-304: RNCC: 3 | RNVC: 2
2221-20075-101: RNCC: 5 | RNVC: 9
S694-4-20-75R: RNCC: 5 | RNVC: 9

20 May 1970

5975-00-488-4708
Electrical Conduit Adapter

004884708
S694-4-18-50R: RNCC: 3 | RNVC: 2
533405-293: RNCC: 7 | RNVC: 2

20 May 1970

5975-00-488-4696
Electrical Conduit Adapter

004884696
533405-78: RNCC: 3 | RNVC: 2
S694-1-24-75R: RNCC: 5 | RNVC: 2
2241-24075-101: RNCC: 5 | RNVC: 2
S694-1 22-75R: RNCC: 5 | RNVC: 2

20 May 1970

5975-00-488-1901
Rigid Metal Conduit Assembly

004881901
10-102490-97: RNCC: 3 | RNVC: 2
10-102490-97: RNCC: 5 | RNVC: 9

22 Jun 1974

5975-00-488-1898
Flexible Metal Conduit

004881898
10-90653-473: RNCC: 3 | RNVC: 2
10-90653-473: RNCC: 5 | RNVC: 9

27 Jun 1974

5975-00-486-8518
Junction Box

004868518
LD490363: RNCC: 3 | RNVC: 2
1815484: RNCC: 5 | RNVC: 2
BUWEPSLD490363: RNCC: 5 | RNVC: 9
BUWEPSLD490363: RNCC: C | RNVC: 1
BUWEPSLD490363: RNCC: C | RNVC: 1

30 May 1969

5975-00-486-0577
Flexible Metal Conduit Assembly

004860577
64A92C183: RNCC: 3 | RNVC: 9
64A92C183: RNCC: 5 | RNVC: 2
64A92C183: RNCC: 5 | RNVC: 2

4 Jun 1969

5975-00-486-0220
Chassis Base

004860220
6091447-1: RNCC: 3 | RNVC: 2
6944604-2: RNCC: 5 | RNVC: 2

19 Jun 1974

5975-00-486-0006
Junction Box

004860006
1656303: RNCC: 3 | RNVC: 2
1656303: RNCC: 5 | RNVC: 2
1656303: RNCC: 5 | RNVC: 2
1656303: RNCC: 5 | RNVC: 9
1656303: RNCC: 5 | RNVC: 9

28 May 1969

5975-00-486-0005
Junction Box

004860005
1656302: RNCC: 3 | RNVC: 2

28 May 1969

5975-00-486-0007
Junction Box

004860007
1656306: RNCC: 3 | RNVC: 9

28 May 1969

5975-00-486-0002
Junction Box

004860002
1815598: RNCC: 3 | RNVC: 9

28 May 1969

5975-00-484-9330
Conduit Outlet

004849330
6-48223-3: RNCC: 3 | RNVC: 2

14 Jun 1974

5975-00-484-9003
Electrical Conduit Nipple

004849003
SMC499041-2: RNCC: 3 | RNVC: 2

17 Mar 1972

5975-00-484-2223
Hub Plate

004842223
RSP66: RNCC: 3 | RNVC: 2
RSP66: RNCC: 5 | RNVC: 9

21 May 1969

5975-00-484-0793
Ground Rod

004840793
9154097: RNCC: 3 | RNVC: 2

30 May 1969

5975-00-483-9819
Contact Plug

004839819
125937: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-483-7266
Electrical Equipment Cabinet

004837266
CU1098BR: RNCC: 3 | RNVC: 9
CU1098B: RNCC: 5 | RNVC: 9

26 May 1969

5975-00-483-1108
Junction Box

004831108
7534658: RNCC: 3 | RNVC: 2

10 Feb 1971

5975-00-482-7386
Electrical Conduit Elbow

004827386
10-111444-26: RNCC: 3 | RNVC: 2
10-111444-29: RNCC: 5 | RNVC: 2
10-111444-29: RNCC: 5 | RNVC: 9
10-111444-26: RNCC: 5 | RNVC: 9

22 Jan 1971

5975-00-482-7384
Electrical Conduit Elbow

004827384
10-111444-27: RNCC: 3 | RNVC: 2
10-111444-28: RNCC: 5 | RNVC: 2
10-111444-27: RNCC: 5 | RNVC: 9
10-111444-28: RNCC: 5 | RNVC: 9

22 Jan 1971

5975-00-482-7062
Bushing

004827062
5M13-3: RNCC: 3 | RNVC: 2
5M13-3: RNCC: 5 | RNVC: 9

9 Mar 1972

5975-00-482-6334
Conduit Outlet

004826334
5332-0: RNCC: 3 | RNVC: 2
275L: RNCC: 3 | RNVC: 2
IH5-2LM: RNCC: 5 | RNVC: 2
A3193212-001: RNCC: 5 | RNVC: 2
IH5-2-LM: RNCC: 5 | RNVC: 9
A3193212: RNCC: D | RNVC: 9

1 Feb 1971

5975-00-482-4595
Junction Box Cover

004824595
16444: RNCC: 3 | RNVC: 2

1 Feb 1971

5975-00-482-2664
Electrical Wall Plate

004822664
HBL5222: RNCC: 3 | RNVC: 2
5222: RNCC: 5 | RNVC: 9

18 Jan 1971

5975-00-482-1143
Electrical Conduit Adapter

004821143
100012-FA1200: RNCC: 3 | RNVC: 2
11726431-4: RNCC: 5 | RNVC: 9
E1110-355-12: RNCC: 5 | RNVC: 9
018-1376-020: RNCC: 7 | RNVC: 2

16 Sep 1970

5975-00-481-9094
Electrical Equipment Cabinet

004819094
CAB2A: RNCC: 3 | RNVC: 2
AU1028: RNCC: 5 | RNVC: 2
AU1028HG: RNCC: E | RNVC: 8
AU1028MG: RNCC: E | RNVC: 8

18 Sep 1970

5975-00-481-2774
Cable Hanger

004812774
10068267: RNCC: 3 | RNVC: 2

11 Sep 1970

5975-00-481-2604
Flexible Metal Conduit

004812604
10-90654-473: RNCC: 3 | RNVC: 2
10-90654-473: RNCC: 5 | RNVC: 9

14 Jun 1974

5975-00-480-7881
Electrical Grounding Plate

004807881
8437847: RNCC: 3 | RNVC: 2

14 Sep 1970

5975-00-480-0114
Electrical Cable Nipple

004800114
AN781-2: RNCC: 2 | RNVC: 2

8 Sep 1970

5975-00-479-5039
Electrical-Electronic Equipment Chassis

004795039
123SCAV5094-3: RNCC: 1 | RNVC: 3
121259-2: RNCC: 3 | RNVC: 3
CY7134AP: RNCC: 5 | RNVC: 3
121259-1: RNCC: 5 | RNVC: 3
123SCAV5094-1: RNCC: 5 | RNVC: 9
123SCAV5094-1: RNCC: C | RNVC: 1

8 Mar 1972

5975-00-479-4012
Flexible Metal Conduit Assembly

004794012
738785-37: RNCC: 3 | RNVC: 2

11 Feb 1970

5975-00-479-3032
Electrical Equipment Mounting Base

004793032
SC-D-446265: RNCC: 3 | RNVC: 2
SC-D-446265: RNCC: 5 | RNVC: 2
SC-D-446265: RNCC: 5 | RNVC: 2
SC-D-446265: RNCC: 5 | RNVC: 2
SC-D-446265: RNCC: 5 | RNVC: 2
SC-D-446265: RNCC: 5 | RNVC: 9
SCDL446264: RNCC: 5 | RNVC: 9

4 Feb 1970

5975-00-479-1683
Electrical Conduit Wye

004791683
R15KC07AD00BD: RNCC: 3 | RNVC: 9
R15KC07AD00BD: RNCC: 5 | RNVC: 2
R15KC07AD00BD: RNCC: 5 | RNVC: 9

2 Feb 1970

5975-00-478-8878
Electrical Conduit Bushing

004788878
112537: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-478-7340
Conduit Outlet

004787340
S-316B: RNCC: 3 | RNVC: 2
S316: RNCC: 5 | RNVC: 9
S-316B: RNCC: 5 | RNVC: 9

8 Mar 1972

5975-00-477-9966
Electrical-Electronic Equipment Panel

004779966
B667-342: RNCC: 3 | RNVC: 2

13 May 1970

5975-00-477-7197
Guy Grip

004777197
BG2111: RNCC: 3 | RNVC: 2

16 May 1969

5975-00-477-6607
Electrical-Electronic Equipment Chassis

004776607
613R135H01: RNCC: 3 | RNVC: 2

16 May 1969

5975-00-477-4479
Electrical Equipment Mounting Base

004774479
MT-3697/AKT-19: RNCC: 3 | RNVC: 2
21453-1: RNCC: 5 | RNVC: 2
121SCAV150-5: RNCC: 5 | RNVC: 2

19 Sep 1969

5975-00-477-3737
Junction Box Cover

004773737
CPR102810: RNCC: 3 | RNVC: 2

19 Sep 1969

5975-00-477-3719
Cable Hanger

004773719
CPR102868: RNCC: 3 | RNVC: 2

12 Sep 1969

5975-00-477-2110
Electrical Components Tie Down Strap

004772110
SS7034-0306: RNCC: 3 | RNVC: 2

14 Jun 1971

5975-00-477-0614
Electrical Conduit Adapter

004770614
533405-354: RNCC: 3 | RNVC: 2
21-15-16037-101: RNCC: 5 | RNVC: 9
S694-5-16-37R: RNCC: 5 | RNVC: 9
2215-16037-101: RNCC: 5 | RNVC: 9
2115-16037-101: RNCC: 5 | RNVC: 9

9 Mar 1972

5975-00-477-0238
Chassis Base

004770238
715689-2: RNCC: 3 | RNVC: 2
715689-2: RNCC: 5 | RNVC: 2

12 Jun 1974

5975-00-476-9657
Chassis Base

004769657
9579547-1: RNCC: 3 | RNVC: 2

12 Jun 1974

5975-00-476-1512
Mount

004761512
350T1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-476-1104
Conduit Outlet Cover

004761104
FSK1VDRA: RNCC: 3 | RNVC: 2

12 Jun 1974

5975-00-476-0766
Rack Adapter

004760766
LRA2: RNCC: 3 | RNVC: 9

9 Jun 1974

5975-00-476-0386
Flexible Metal Conduit

004760386
4INC0NDUIT: RNCC: 3 | RNVC: 2
47010: RNCC: 5 | RNVC: 2
LT 19: RNCC: 5 | RNVC: 2

12 Jun 1974

5975-00-476-0344
Junction Box

004760344
A20N20ALP: RNCC: 3 | RNVC: 2
AB-20206LM: RNCC: 3 | RNVC: 2
A20N20A: RNCC: 5 | RNVC: 9

12 Jun 1974

5975-00-474-9769
Electrical Equipment Rack

004749769
204-031-380-11A: RNCC: 3 | RNVC: 2

4 Jun 1971

5975-00-474-9763
Electrical Equipment Rack

004749763
205-031-380-113A: RNCC: 3 | RNVC: 2

4 Jun 1971

5975-00-474-9560
Electrical-Electronic Equipment Chassis

004749560
SC-D-630236: RNCC: 3 | RNVC: 2

4 Jun 1971

5975-00-474-6353
Chassis Base

004746353
715688-2: RNCC: 3 | RNVC: 2

9 Jun 1974

5975-00-474-6342
Aft Cradle Cable Guard

004746342
715692-1: RNCC: 3 | RNVC: 2

9 Jun 1974

5975-00-473-7858
Raceway Tee

004737858
5715: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-472-5124
Electrical Box Connector

004725124
TC726A: RNCC: 3 | RNVC: 2
1155-S: RNCC: 5 | RNVC: 9
725B: RNCC: 5 | RNVC: 9
M20-25Y: RNCC: 5 | RNVC: 9
TC726: RNCC: 5 | RNVC: 9
5041: RNCC: 5 | RNVC: 9
20505: RNCC: 5 | RNVC: 9
235-1: RNCC: 5 | RNVC: 9
1455: RNCC: 5 | RNVC: 9

9 Mar 1972

5975-00-471-8431
Blank Panel

004718431
ARP-819: RNCC: 3 | RNVC: 2
9002-008 SIZE E: RNCC: 5 | RNVC: 9

11 Jan 1971

5975-00-471-3731
Electrical Conduit Adapter

004713731
533405-356: RNCC: 3 | RNVC: 2
S694-5-16-50R: RNCC: 5 | RNVC: 2
2215-16050-101: RNCC: 5 | RNVC: 2
21-15-16050-101: RNCC: 5 | RNVC: 9
2115-16050-101: RNCC: 5 | RNVC: 9

9 Mar 1972

5975-00-471-3465
Switch Plate

004713465
0000B0119AW: RNCC: 3 | RNVC: 9
U118FY: RNCC: 5 | RNVC: 9

24 Aug 1970

5975-00-471-3381
Flexible Metal Conduit Assembly

004713381
194377-DI0360: RNCC: 3 | RNVC: 2
205195-DI0360-0: RNCC: 5 | RNVC: 9
C223-0375-3600G3G3: RNCC: 5 | RNVC: 9
C223-0375-3600G3G3: RNCC: 5 | RNVC: 9
205195-DI0360-0: RNCC: 5 | RNVC: 9

24 Aug 1970

5975-00-471-3380
Flexible Metal Conduit Assembly

004713380
C223-0375-2400G4G4: RNCC: 3 | RNVC: 2
C223-0375-2400G4G4: RNCC: 5 | RNVC: 9

24 Aug 1970

5975-00-471-3371
Hub

004713371
B150: RNCC: 3 | RNVC: 2

24 Aug 1970

5975-00-471-3372
Electrical Cable Nipple

004713372
25321: RNCC: 3 | RNVC: 2
32201: RNCC: 5 | RNVC: 2
17050: RNCC: 5 | RNVC: 9
25321: RNCC: 5 | RNVC: 9

24 Aug 1970

5975-00-471-0625
Filler Panel

004710625
5060-0794: RNCC: 3 | RNVC: 2
5060-0794: RNCC: 3 | RNVC: 9
5060-0794: RNCC: 5 | RNVC: 9
HP5060-0794: RNCC: 5 | RNVC: 9

19 Aug 1970

5975-00-470-7527
Electrical Grounding Plate

004707527
SCC446383: RNCC: 3 | RNVC: 2

30 Jan 1970

5975-00-469-6672
Electrical-Electronic Equipment Chassis

004696672
11729770: RNCC: 3 | RNVC: 2

28 Jan 1970

5975-00-469-5577
Cable Hanger

004695577
149850: RNCC: 3 | RNVC: 9

26 Jan 1970

5975-00-469-4580
Electrical Equipment Leg

004694580
8254-233: RNCC: 3 | RNVC: 2

27 May 1971

5975-00-468-9924
Flexible Metal Conduit

004689924
F0203BLUE: RNCC: 3 | RNVC: 2
T105-1BLUE: RNCC: 5 | RNVC: 9

8 May 1970

5975-00-468-6111
Ferrule Nut

004686111
FBS465: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-468-3978
Hanger Bar

004683978
SX115: RNCC: 3 | RNVC: 2

17 Aug 1970

5975-00-467-8777
Special Conduit

004678777
B283055-8: RNCC: 3 | RNVC: 9
B283055-8: RNCC: C | RNVC: 1

8 May 1970

5975-00-467-8776
Special Conduit

004678776
B283055-7: RNCC: 3 | RNVC: 9
B283055-7: RNCC: C | RNVC: 1

8 May 1970

5975-00-467-7661
Clip Transistor S

004677661
30-613-7010: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-467-3999
Junction Box

004673999
404LP: RNCC: 3 | RNVC: 9
AB-443JL: RNCC: 5 | RNVC: 2
SB-443JL: RNCC: 5 | RNVC: 9

7 Jun 1974

5975-00-467-1143
Electrical Equipment Mounting Base

004671143
8010000309-1: RNCC: 3 | RNVC: 9
MT4615ARN84V: RNCC: C | RNVC: 1

3 Jun 1974

5975-00-466-9359
Electrical Box Connector

004669359
CGB6818: RNCC: 3 | RNVC: 2

3 Jun 1974

5975-00-466-9287
Blank Panel

004669287
H2200-12: RNCC: 3 | RNVC: 9
H2200-12: RNCC: 5 | RNVC: 9

3 Jun 1974

5975-00-466-9284
Strain Electrical Conductor Clamp

004669284
L5014: RNCC: 3 | RNVC: 1

3 Jun 1974

5975-00-465-6397
Junction Box

004656397
921306-101: RNCC: 3 | RNVC: 2

28 Jan 1970

5975-00-465-6019
Electrical Equipment Drawer

004656019
SME652627: RNCC: 3 | RNVC: 2

28 Jan 1970

5975-00-465-5955
Flexible Metal Conduit Assembly

004655955
7984254: RNCC: 3 | RNVC: 2
7968267: RNCC: 5 | RNVC: 2
5975004655955: RNCC: 6 | RNVC: 9

28 Jan 1970

5975-00-464-7535
Blank Panel

004647535
548-7442-005: RNCC: 3 | RNVC: 9
548-7442-005: RNCC: 5 | RNVC: 2

23 May 1969

5975-00-464-0693
Electrical Box Connector

004640693
ZY5: RNCC: 3 | RNVC: 2
019-1588-050: RNCC: 5 | RNVC: 9
DB3316: RNCC: E | RNVC: 8

3 Mar 1972

5975-00-463-8447
Junction Box Extension

004638447
739509-01: RNCC: 3 | RNVC: 2

26 May 1969

5975-00-463-8445
Junction Box Cover

004638445
739983-01: RNCC: 3 | RNVC: 2

26 May 1969

5975-00-463-4294
Flexible Metal Conduit Assembly

004634294
205196-DI0240: RNCC: 3 | RNVC: 2
C223-0500-2400G3G3: RNCC: 5 | RNVC: 9

17 Aug 1970

5975-00-462-9376
Electrical-Electronic Equipment Chassis

004629376
212377: RNCC: 3 | RNVC: 9

9 May 1969

5975-00-462-9325
Electrical Conduit Nipple

004629325
HO-226: RNCC: 3 | RNVC: 2
0N200: RNCC: 3 | RNVC: 9
1458: RNCC: 5 | RNVC: 1
1525: RNCC: 5 | RNVC: 9
195: RNCC: 5 | RNVC: 9
305: RNCC: 5 | RNVC: 9

9 May 1969

5975-00-462-2911
Electrical Box Connector

004622911
7722324: RNCC: 3 | RNVC: 2

7 May 1969

5975-00-461-7490
Junction Box

004617490
301B1314: RNCC: 3 | RNVC: 2

12 May 1969

5975-00-460-8784
Flexible Metal Conduit Assembly

004608784
4158203-5: RNCC: 3 | RNVC: 2
4158203-5: RNCC: 3 | RNVC: 9

16 Jan 1970

5975-00-460-4434
Electrical Grounding Plate

004604434
779-2454-001: RNCC: 3 | RNVC: 2

12 Jan 1970

5975-00-459-8902
Electrical Equipment Mounting Base

004598902
T0LAX039: RNCC: 3 | RNVC: 2
50141-1: RNCC: 5 | RNVC: 2
HE181-0002-0001: RNCC: 5 | RNVC: 9
HE181-0002: RNCC: 5 | RNVC: 9

9 Jan 1970

5975-00-459-8609
Electrical-Electronic Equipment Chassis

004598609
SC-D-65911-102: RNCC: 3 | RNVC: 2

2 Jan 1970

5975-00-459-7913
Electrical Equipment Mounting Base

004597913
57946-507-1: RNCC: 3 | RNVC: 2

29 Dec 1969

5975-00-459-4172
Electrical Box Connector

004594172
9-20E12: RNCC: 3 | RNVC: 2
7000-542-12-H: RNCC: 5 | RNVC: 2

12 Aug 1970

5975-00-459-3330
Electrical Equipment Rack

004593330
180957-1: RNCC: 3 | RNVC: 2

19 Aug 1970

5975-00-459-3329
Electrical-Electronic Equipment Chassis

004593329
456-293: RNCC: 3 | RNVC: 2

12 Aug 1970

5975-00-458-9145
Electrical Equipment Rack

004589145
004467-01: RNCC: 3 | RNVC: 2
MT4215TRN26: RNCC: 5 | RNVC: 2

2 Jan 1970

5975-00-458-3038
Electrical-Electronic Equipment Chassis

004583038
K687040-403: RNCC: 3 | RNVC: 2
5975PL1727379: RNCC: 6 | RNVC: 9

22 Sep 1972

5975-00-457-9635
Junction Box Assembly

004579635
150938G1: RNCC: 3 | RNVC: 9

30 Apr 1969

5975-00-457-0611
Elbow Connector

004570611
SMC632666: RNCC: 3 | RNVC: 2

28 Apr 1969

5975-00-457-0573
Electrical-Electronic Equipment Panel

004570573
SM-D-414500: RNCC: 3 | RNVC: 2

28 Apr 1969

5975-00-457-0401
Cable Hanger

004570401
10232980: RNCC: 3 | RNVC: 2
10232980: RNCC: 5 | RNVC: 9
10232980: RNCC: 5 | RNVC: 9
1440004570401: RNCC: 6 | RNVC: 9

28 Apr 1969

5975-00-456-7715
Conductor Scleeve

004567715
390560-1: RNCC: 3 | RNVC: 2

19 Feb 1972

5975-00-456-6003
Electrical-Electronic Equipment Panel

004566003
SMD414935: RNCC: 3 | RNVC: 2
SMD414935ANDSMB414936: RNCC: 5 | RNVC: 2

25 Apr 1969

5975-00-455-9388
Cable Support

004559388
10191513: RNCC: 3 | RNVC: 2
5975004559388: RNCC: 5 | RNVC: 9

21 Apr 1969

5975-00-455-6300
Junction Box

004556300
02191-1751: RNCC: 3 | RNVC: 9
05-2191-1751: RNCC: 5 | RNVC: 2
2191-1751: RNCC: 5 | RNVC: 9
02191-1751: RNCC: 5 | RNVC: 9

25 Apr 1969

5975-00-455-2431
Electrical Grounding Plate

004552431
112695-2: RNCC: 3 | RNVC: 2

23 Apr 1969

5975-00-455-2271
Electrical Cable Nipple

004552271
2152950-1: RNCC: 3 | RNVC: 9

16 Apr 1969

5975-00-454-9055
C0nduit Assy

004549055
25222-20: RNCC: 3 | RNVC: 2
25222-20: RNCC: 5 | RNVC: 9

16 Apr 1969

5975-00-454-8456
Electrical-Electronic Equipment Panel

004548456
11150684: RNCC: 3 | RNVC: 2
11150684: RNCC: 5 | RNVC: 9

16 Apr 1969

5975-00-454-4657
Electrical-Electronic Equipment Chassis

004544657
130925-1: RNCC: 3 | RNVC: 2

27 Feb 1972

5975-00-453-9662
Rod

004539662
B32572P1: RNCC: 3 | RNVC: 9

11 Apr 1969

5975-00-453-9254
Electrical-Electronic Equipment Panel

004539254
11151060: RNCC: 3 | RNVC: 2
11151060: RNCC: 5 | RNVC: 2
11151060: RNCC: 5 | RNVC: 9

11 Apr 1969

5975-00-453-9262
Electrical-Electronic Equipment Panel

004539262
11151059: RNCC: 3 | RNVC: 2
11151059: RNCC: 5 | RNVC: 2
11151059: RNCC: 5 | RNVC: 9

11 Apr 1969

5975-00-453-5748
Capacitor Strap

004535748
80-14582-2: RNCC: 3 | RNVC: 2
80-14582-2: RNCC: 3 | RNVC: 9

9 Apr 1969

5975-00-453-3263
Electrical Entrance Cap

004533263
A274801: RNCC: 3 | RNVC: 9
A274801: RNCC: C | RNVC: 1

8 May 1970

5975-00-453-3241
Electrical Conduit Ferrule

004533241
CP1127-7: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3248
Electrical Conduit Ferrule

004533248
CP1128-14: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3246
Electrical Conduit Ferrule

004533246
CP1128-9: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3242
Electrical Conduit Ferrule

004533242
CP1127-9: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3245
Electrical Conduit Ferrule

004533245
CP1128-7: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3235
Electrical Conduit Ferrule

004533235
CP1125-5: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3240
Electrical Conduit Ferrule

004533240
CP1126-9: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3239
Electrical Conduit Ferrule

004533239
CP1126-7: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3237
Electrical Conduit Ferrule

004533237
CP1126-3: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3236
Electrical Conduit Ferrule

004533236
CP1125-6: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3219
Electrical Conduit Ferrule

004533219
CP1123-3: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3230
Electrical Conduit Ferrule

004533230
CP1124-5: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3234
Electrical Conduit Ferrule

004533234
CP1124-9: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3238
Electrical Conduit Ferrule

004533238
CP1126-6: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3228
Electrical Conduit Ferrule

004533228
CP1124-4: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3227
Electrical Conduit Ferrule

004533227
CP1123-6: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3212
Electrical Conduit Ferrule

004533212
CP1122-1: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3204
Conduit Flexible

004533204
T105-13BLACK: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3205
Conduit Flexible

004533205
T105-14BLACK: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3226
Electrical Conduit Ferrule

004533226
CP1123-5: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3224
Electrical Conduit Ferrule

004533224
CP1123-4: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3213
Electrical Conduit Ferrule

004533213
CP1122-3: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3214
Electrical Conduit Ferrule

004533214
CP1122-4: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3209
Electrical Conduit Ferrule

004533209
CP1121-2: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3215
Electrical Conduit Ferrule

004533215
CP1123-2: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3203
Conduit Flexible

004533203
T105-9BLACK: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3202
Conduit Flexible

004533202
T105-8BLACK: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3201
Conduit Flexible

004533201
T105-7: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-453-3198
Conduit Flexible

004533198
0281: RNCC: 3 | RNVC: 2
T105-4BLACK: RNCC: 5 | RNVC: 9

8 May 1970

5975-00-453-3197
Conduit Flexible

004533197
T105-3BLACK: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-452-9315
Conduit Special

004529315
1118047: RNCC: 3 | RNVC: 2
1118047: RNCC: 5 | RNVC: 9

8 May 1970

5975-00-452-6206
Connector Conduit

004526206
B80498: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-452-6137
Connector Conduit

004526137
B79641: RNCC: 3 | RNVC: 2

8 May 1970

5975-00-452-1195
Electrical Conduit Adapter

004521195
533405-312: RNCC: 3 | RNVC: 2
S694-4-22-62R: RNCC: 5 | RNVC: 9

13 May 1970

5975-00-452-1196
Electrical Conduit Adapter

004521196
533405-313: RNCC: 3 | RNVC: 2
S694-4-22-75R: RNCC: 5 | RNVC: 2
2221-22075-101: RNCC: 5 | RNVC: 2

13 May 1970

5975-00-452-1197
Electrical Conduit Adapter

004521197
533405-322: RNCC: 3 | RNVC: 2
2221-24075-101: RNCC: 5 | RNVC: 2
S694-4-24-75R: RNCC: 5 | RNVC: 9

13 May 1970

5975-00-452-1193
Electrical Conduit Adapter

004521193
S694-1-24-100R: RNCC: 3 | RNVC: 2
2241-24100-101: RNCC: 5 | RNVC: 9
S694-124-100R: RNCC: 5 | RNVC: 9
533405-80: RNCC: 7 | RNVC: 2

13 May 1970

5975-00-451-8588
Flexible Metal Conduit Assembly

004518588
C175R0375-0402-9898: RNCC: 3 | RNVC: 2
A44325-6: RNCC: 5 | RNVC: 9

4 Jun 1971

5975-00-451-8276
Electrical Equipment Mounting Base

004518276
SCB658651: RNCC: 3 | RNVC: 2
MT4264URC: RNCC: 5 | RNVC: 2

21 May 1971

5975-00-451-7208
Electrical Equipment Mounting Base

004517208
203346-000: RNCC: 3 | RNVC: 2

23 Feb 1972

5975-00-451-4427
Electrical Cable Protector

004514427
10893989: RNCC: 3 | RNVC: 2

14 May 1971

5975-00-451-3951
Electrical-Electronic Equipment Chassis

004513951
621682-2: RNCC: 3 | RNVC: 2

14 May 1971

5975-00-451-3318
Wire Strand Hanger

004513318
10031054-101: RNCC: 3 | RNVC: 9

14 May 1971

5975-00-451-3281
Electrical-Electronic Equipment Chassis

004513281
1128AVP40030-1: RNCC: 3 | RNVC: 2
1128AVP40030-1: RNCC: 5 | RNVC: 9

14 May 1971

5975-00-451-2488
Mounting Plate

004512488
4998957: RNCC: 3 | RNVC: 2

16 Feb 1972

5975-00-451-0230
Electrical Equipment Mounting Base

004510230
387370-1: RNCC: 3 | RNVC: 2
387370-1: RNCC: 5 | RNVC: 9

19 Feb 1972

5975-00-450-6950
Electrical Box Connector

004506950
ZY6: RNCC: 3 | RNVC: 2
DB9516: RNCC: E | RNVC: 8

26 Dec 1969

5975-00-450-5676
Electrical Conduit Elbow

004505676
EL196SA: RNCC: 3 | RNVC: 2

17 Dec 1969

5975-00-450-4796
Blank Panel

004504796
544-3146-003: RNCC: 3 | RNVC: 2

12 Dec 1969

5975-00-450-3685
Hub Plate Box

004503685
21C1583-190: RNCC: 3 | RNVC: 2
RSM1: RNCC: 5 | RNVC: 9

12 Dec 1969

5975-00-450-3135
Chassis Base

004503135
20589-2: RNCC: 3 | RNVC: 2

16 Feb 1972

5975-00-450-0076
Electrical Conduit Adapter

004500076
E1110-355-32: RNCC: 3 | RNVC: 2
A44325-1: RNCC: 5 | RNVC: 9

12 May 1971

5975-00-450-0063
Blank Panel

004500063
179290BR: RNCC: 3 | RNVC: 2
179290BR: RNCC: 5 | RNVC: 2
179290BR: RNCC: 5 | RNVC: 9
179290BR: RNCC: 5 | RNVC: 9
TP179290: RNCC: 5 | RNVC: 9

7 May 1971

5975-00-449-7817
Bracket And Insulat

004497817
C3DZ5260B: RNCC: 3 | RNVC: 9
C3DZ5260B: RNCC: 5 | RNVC: 9

10 Dec 1969

5975-00-449-6010
Deadend Clamp

004496010
VCP44: RNCC: 3 | RNVC: 9

26 May 1974

5975-00-449-5603
Rigid Metal Conduit Assembly

004495603
209-001-194-1: RNCC: 3 | RNVC: 2

8 Dec 1969

5975-00-449-1209
Electrical Cable Nipple

004491209
28472-1: RNCC: 3 | RNVC: 2
28472-1: RNCC: 5 | RNVC: 9
28472-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-448-9870
Electrical-Electronic Equipment Chassis

004489870
A101: RNCC: 3 | RNVC: 2

15 May 1970

5975-00-448-5015
Electrical-Electronic Equipment Chassis

004485015
A141: RNCC: 3 | RNVC: 2
11410: RNCC: 5 | RNVC: 2

13 May 1970

5975-00-448-3150
Flexible Conduit Assembly

004483150
223707-DI0420: RNCC: 3 | RNVC: 2
5116427-15: RNCC: 5 | RNVC: 9
5116427-15: RNCC: 5 | RNVC: 9
C151-0750-4200-7777: RNCC: 5 | RNVC: 9
22370DI0420: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-448-3155
Flexible Metal Conduit Assembly

004483155
5116427-31: RNCC: 3 | RNVC: 2
5116427-31: RNCC: 5 | RNVC: 9

11 Jan 1968

5975-00-448-3100
Conduit Assy-Rh Eng

004483100
2143159: RNCC: 3 | RNVC: 2
2143159: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-448-2930
Metallic Raceway

004482930
700: RNCC: 3 | RNVC: 1

8 Jan 1971

5975-00-446-7875
Chassis Base

004467875
21928: RNCC: 3 | RNVC: 9
2192953: RNCC: 5 | RNVC: 2
21928: RNCC: 5 | RNVC: 2
MT-2740/DRW-29: RNCC: 5 | RNVC: 2
2192953: RNCC: 5 | RNVC: 2
1917-1001: RNCC: 5 | RNVC: 2
90127-7: RNCC: 5 | RNVC: 9
520-3: RNCC: 5 | RNVC: 9
90127-7: RNCC: 5 | RNVC: 9
90127-7: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-446-7680
Electrical Box Connector

004467680
TWL100L: RNCC: 3 | RNVC: 2

12 Jan 1968

5975-00-445-7264
Electrical-Electronic Equipment Chassis

004457264
SMC448424: RNCC: 3 | RNVC: 2

8 Jan 1971

5975-00-444-4746
Chassis Base

004444746
234198-000: RNCC: 3 | RNVC: 2

12 Feb 1972

5975-00-443-4936
Metallic Raceway

004434936
11153529: RNCC: 3 | RNVC: 2

4 Apr 1969

5975-00-442-3048
Flexible Metal Conduit Assembly

004423048
121AV15500-1: RNCC: 3 | RNVC: 2

26 Mar 1969

5975-00-442-3003
Electrical Box Connector

004423003
2142: RNCC: 3 | RNVC: 2
1137: RNCC: 5 | RNVC: 1
C-38: RNCC: 5 | RNVC: 9
4300S: RNCC: 5 | RNVC: 9
457: RNCC: 5 | RNVC: 9
20307: RNCC: 5 | RNVC: 9

23 May 1974

5975-00-442-0821
Dust And Moisture Seal Boot

004420821
L5400450-005-00: RNCC: 3 | RNVC: 2

5 Dec 1969

5975-00-442-0599
Electrical Conduit Ferrule

004420599
10-21610: RNCC: 3 | RNVC: 9
10-21610: RNCC: 5 | RNVC: 9
10-21610: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-441-9707
Electrical Equipment Mounting Base

004419707
MT4062ACQ5: RNCC: 3 | RNVC: 2
671466-103: RNCC: 5 | RNVC: 2
89-161305-2: RNCC: 7 | RNVC: 2

12 Dec 1969

5975-00-441-9544
Electrical End Sleeve

004419544
750309: RNCC: 3 | RNVC: 9

5 Dec 1969

5975-00-441-1042
Junction Box

004411042
37C300382P101: RNCC: 1 | RNVC: 2
10-174170-3: RNCC: 3 | RNVC: 2
4001T38P01: RNCC: 3 | RNVC: 2
10-38475-1: RNCC: 5 | RNVC: 2
10-38475-1: RNCC: 5 | RNVC: 9
10-38475-1: RNCC: 5 | RNVC: 9
9631386: RNCC: 5 | RNVC: 9
37C300382P101: RNCC: 5 | RNVC: 9
10-174170-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-440-5287
Rigid Metal Conduit Assembly

004405287
199-55055-2: RNCC: 3 | RNVC: 2

3 Dec 1969

5975-00-440-5285
Rigid Metal Conduit Assembly

004405285
199-55055-1: RNCC: 3 | RNVC: 2

3 Dec 1969

5975-00-439-7776
Blank Panel

004397776
305660: RNCC: 3 | RNVC: 9
305660: RNCC: 5 | RNVC: 9
305660: RNCC: 5 | RNVC: 9
305660: RNCC: C | RNVC: 1

3 Dec 1969

5975-00-439-6141
Electrical Equipment Drawer

004396141
SME652625: RNCC: 3 | RNVC: 2

22 Dec 1969

5975-00-439-6142
Electrical Equipment Drawer

004396142
SME652645-1: RNCC: 3 | RNVC: 2

22 Dec 1969

5975-00-439-4272
Electrical Wall Plate

004394272
91011: RNCC: 3 | RNVC: 9
17-1BR: RNCC: 5 | RNVC: 2

1 Dec 1969

5975-00-439-2052
Junction Box Extension

004392052
1490: RNCC: 3 | RNVC: 2
SBEX: RNCC: 5 | RNVC: 2

5 Dec 1969

5975-00-438-5602
Rigid Metal Conduit

004385602
212-001-180-1: RNCC: 3 | RNVC: 2

3 Dec 1969

5975-00-438-4839
Electrical Conduit Coupling

004384839
202C272: RNCC: 3 | RNVC: 2
C2086-8-7: RNCC: 7 | RNVC: 2

3 Dec 1969

5975-00-438-4838
Electrical Conduit Coupling

004384838
202C261: RNCC: 3 | RNVC: 2
C2086-8-6: RNCC: 7 | RNVC: 2

3 Dec 1969

5975-00-438-4832
Electrical Conduit Coupling

004384832
202C241-13: RNCC: 3 | RNVC: 2
202C241: RNCC: 5 | RNVC: 9
C2086-8-4: RNCC: 7 | RNVC: 2

3 Dec 1969

5975-00-438-4836
Electrical Conduit Coupling

004384836
202C251: RNCC: 3 | RNVC: 2
GA801CJ4: RNCC: 3 | RNVC: 2
C2086-8-5: RNCC: 7 | RNVC: 2
202C51: RNCC: C | RNVC: 1

3 Dec 1969

5975-00-438-4500
Electrical-Electronic Equipment Chassis

004384500
121408-02: RNCC: 3 | RNVC: 2

5 Sep 1969

5975-00-438-4396
Electrical-Electronic Equipment Panel

004384396
513R191G01: RNCC: 3 | RNVC: 2

5 Sep 1969

5975-00-438-3168
Stuffing Tube

004383168
2620357-5: RNCC: 3 | RNVC: 2

12 Sep 1969

5975-00-438-2614
Cable Marker Sleeve

004382614
5M43Q4SMALLF20GA: RNCC: 3 | RNVC: 2

5 Sep 1969

5975-00-438-0172
Electrical Equipment Mounting Base

004380172
652513-1: RNCC: 3 | RNVC: 2

12 Sep 1969

5975-00-438-0178
Electrical Equipment Rack Base

004380178
534939-1: RNCC: 3 | RNVC: 2

12 Sep 1969

5975-00-438-0161
Electrical Equipment Mounting Base

004380161
6803-3000-1: RNCC: 3 | RNVC: 9
MT4124APN169A: RNCC: 5 | RNVC: 1

12 Sep 1969

5975-00-437-7856
Electrical Conduit Adapter

004377856
13500: RNCC: 3 | RNVC: 2
13500: RNCC: 5 | RNVC: 9

12 Sep 1969

5975-00-437-6722
Electrical Box Connector

004376722
DHF4: RNCC: 3 | RNVC: 2

11 Feb 1972

5975-00-437-2346
Electrical-Electronic Equipment Chassis

004372346
548-4153-003: RNCC: 3 | RNVC: 2

29 Aug 1969

5975-00-437-1597
Electrical-Electronic Equipment Chassis

004371597
41026204: RNCC: 3 | RNVC: 9

18 Feb 1972

5975-00-436-1799
Electrical-Electronic Equipment Chassis

004361799
465349-1: RNCC: 3 | RNVC: 2

24 Mar 1969

5975-00-436-1676
Stuffing Tube

004361676
1B20FTSH0F23: RNCC: 2 | RNVC: 2
MILS23920: RNCC: 4 | RNVC: 1

7 Apr 1969

5975-00-436-0620
Electrical-Electronic Equipment Chassis

004360620
931363-802: RNCC: 3 | RNVC: 2

20 May 1974

5975-00-436-0324
Electrical-Electronic Equipment Chassis

004360324
1937149-1: RNCC: 3 | RNVC: 2

21 Mar 1969

5975-00-435-7744
Electrical Cable Protector

004357744
11687380: RNCC: 3 | RNVC: 2
717290-39: RNCC: 5 | RNVC: 9

21 Mar 1969

5975-00-435-7065
Electrical Cable Protector

004357065
0216268: RNCC: 3 | RNVC: 2
0216268: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-435-7038
Electrical Components Tie Down Strap

004357038
2180973: RNCC: 3 | RNVC: 2
2180973: RNCC: 5 | RNVC: 9

12 Feb 1972

5975-00-435-7024
Insulator Clamp

004357024
0473412: RNCC: 3 | RNVC: 2
0473412: RNCC: 5 | RNVC: 9

12 Feb 1972

5975-00-435-5929
Electrical Box Connector

004355929
355: RNCC: 3 | RNVC: 9

28 Mar 1969

5975-00-435-5927
Electrical Box Connector

004355927
355-3: RNCC: 3 | RNVC: 9

28 Mar 1969

5975-00-435-5185
Electrical Grounding Plate

004355185
298782-167: RNCC: 3 | RNVC: 2

28 Mar 1969

5975-00-435-3586
Electrical-Electronic Equipment Chassis

004353586
780-0536-001: RNCC: 3 | RNVC: 2

17 Mar 1969

5975-00-435-0350
Electrical Conduit Elbow

004350350
PFFL100: RNCC: 3 | RNVC: 2
CE-0100: RNCC: 5 | RNVC: 9
CE-0100: RNCC: 5 | RNVC: 9

20 May 1974

5975-00-435-0148
Junction Box

004350148
A02E2765-1: RNCC: 3 | RNVC: 2

14 Mar 1969

5975-00-434-5588
Electrical-Electronic Equipment Chassis

004345588
100206: RNCC: 3 | RNVC: 2

7 Aug 1970

5975-00-433-5983
Junction Box Cover

004335983
74803181-9: RNCC: 3 | RNVC: 2
4803181-9: RNCC: 5 | RNVC: 9

5 Feb 1972

5975-00-433-2878
Electrical Conduit Locknut

004332878
2061-1212: RNCC: 3 | RNVC: 2
2061-1212: RNCC: 5 | RNVC: 2
2061-1212: RNCC: 5 | RNVC: 9

30 Jul 1970

5975-00-433-2725
Electrical Conduit

004332725
7445343-203: RNCC: 3 | RNVC: 2

30 Jul 1970

5975-00-433-2072
Electrical Equipment Shelf

004332072
SA1720GT: RNCC: 3 | RNVC: 2
SA1720G: RNCC: 5 | RNVC: 9

14 Sep 1972

5975-00-433-1696
Junction Box

004331696
57242: RNCC: 3 | RNVC: 2

14 Sep 1972

5975-00-433-1033
Electrical Box Connector

004331033
OE-75: RNCC: 3 | RNVC: 9
222: RNCC: 5 | RNVC: 2
TO-222: RNCC: 5 | RNVC: 2
231-DC2: RNCC: 5 | RNVC: 9

17 Aug 1970

5975-00-432-5526
Electrical Conduit Locknut

004325526
AN3066-32: RNCC: 2 | RNVC: 2
AN3066: RNCC: 4 | RNVC: 1
AN3066-32: RNCC: 5 | RNVC: 1
C241418-11: RNCC: 5 | RNVC: 1
8910356: RNCC: 5 | RNVC: 1
6-2-32: RNCC: 5 | RNVC: 1
6-2-32: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-432-4521
Electrical Conduit Ferrule

004324521
AN3052-4: RNCC: 2 | RNVC: 2
11-3-4: RNCC: 5 | RNVC: 1
11-3-4: RNCC: 5 | RNVC: 9
6026-4210-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-432-4027
Electrical Conduit Ferrule

004324027
117-3B0500: RNCC: 3 | RNVC: 2
117-3B0500: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-432-2820
Electrical Conduit Adapter

004322820
1257: RNCC: 3 | RNVC: 2
1257: RNCC: 5 | RNVC: 2
RB-350-300: RNCC: 5 | RNVC: 2
1177: RNCC: 5 | RNVC: 2
349R: RNCC: 5 | RNVC: 9

14 May 1974

5975-00-432-2819
Electrical Conduit Nipple

004322819
ANSI UL514B: RNCC: 3 | RNVC: 1
UL 514B: RNCC: 3 | RNVC: 2
WC581: RNCC: 5 | RNVC: 9

14 May 1974

5975-00-432-0346
Electrical Conduit Adapter

004320346
6430-09-032-15: RNCC: 3 | RNVC: 2
234-578-9005: RNCC: 5 | RNVC: 9

14 May 1974

5975-00-432-0345
Electrical Conduit Adapter

004320345
6430-09-022-15: RNCC: 3 | RNVC: 2
234-578-9003: RNCC: 5 | RNVC: 9

14 May 1974

5975-00-431-8708
Sea Cable Connector

004318708
CGBS3016S602BUSH016: RNCC: 3 | RNVC: 2
2601774-3: RNCC: 7 | RNVC: 2

28 Apr 1971

5975-00-431-8707
Electrical Box Connector

004318707
CGBS4017: RNCC: 3 | RNVC: 2
CGBS4017S602BUSH97: RNCC: 5 | RNVC: 9
CGBS4017S752BUSH97: RNCC: 5 | RNVC: 9
2601774-2: RNCC: 7 | RNVC: 2

28 Apr 1971

5975-00-431-8706
Sealing Cable Connector

004318706
CGBS2014S752: RNCC: 3 | RNVC: 2
CGBS2014S602BUSH014: RNCC: 5 | RNVC: 9
2601774-1: RNCC: 7 | RNVC: 2

28 Apr 1971

5975-00-431-8622
Electrical Conduit Sealing Fitting

004318622
EYS56: RNCC: 3 | RNVC: 2
EYS56: RNCC: 5 | RNVC: 9

5 May 1971

5975-00-428-1683
Electrical Equipment Mounting Base

004281683
P69E32720-10: RNCC: 3 | RNVC: 2

19 Apr 1971

5975-00-427-2866
Convolute Reinforcement

004272866
CRN1137-1: RNCC: 3 | RNVC: 2
9D0265-1: RNCC: 5 | RNVC: 2
104-542-9001: RNCC: 5 | RNVC: 9

4 May 1974

5975-00-426-8428
Electrical Conduit Adapter

004268428
0090-24-131-12: RNCC: 3 | RNVC: 2
8035855: RNCC: D | RNVC: 9

28 Apr 1971

5975-00-425-8090
Rigid Metal Conduit

004258090
53G79005-91: RNCC: 3 | RNVC: 2

14 Apr 1971

5975-00-425-4249
Electrical Conduit Adapter

004254249
533405-324: RNCC: 3 | RNVC: 2
S694-4-24-100R: RNCC: 5 | RNVC: 2
2221-24100-101: RNCC: 5 | RNVC: 2
2121-24100-101: RNCC: 5 | RNVC: 9
21-21-24100-101: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-4258
Electrical Conduit Adapter

004254258
533405-353: RNCC: 3 | RNVC: 2
S694-5-16-28R: RNCC: 5 | RNVC: 2
2215-16028-101: RNCC: 5 | RNVC: 2
2115-16028-101: RNCC: 5 | RNVC: 9
21-15-16028-101: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-4166
Electrical Conduit Adapter

004254166
533405-308: RNCC: 3 | RNVC: 2
S694-4-22-28R: RNCC: 5 | RNVC: 2
2221-22028-101: RNCC: 5 | RNVC: 2
2121-22028-101: RNCC: 5 | RNVC: 9
21-21-22028-101: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-4246
Electrical Conduit Adapter

004254246
533405-310: RNCC: 3 | RNVC: 2
2221-22044-101: RNCC: 5 | RNVC: 9
2121-22044-101: RNCC: 5 | RNVC: 9
21-21-22044-101: RNCC: 5 | RNVC: 9
S694-4-22-44R: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-4219
Electrical-Electronic Equipment Chassis

004254219
0N143373-2: RNCC: 3 | RNVC: 2

12 Apr 1971

5975-00-425-4231
Electrical Conduit Adapter

004254231
533405-309: RNCC: 3 | RNVC: 2
2121-22037-101: RNCC: 5 | RNVC: 9
S694-4-22-37R: RNCC: 5 | RNVC: 9
2221-22037-101: RNCC: 5 | RNVC: 9
21-21-22037-101: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-4164
Electrical Conduit Adapter

004254164
533405-303: RNCC: 3 | RNVC: 2
21-21-20062-101: RNCC: 5 | RNVC: 9
S694-4-20-62R: RNCC: 5 | RNVC: 9
2221-20062-101: RNCC: 5 | RNVC: 9
2121-20062-101: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-4127
Electrical Conduit Adapter

004254127
533405-265: RNCC: 3 | RNVC: 2
21-21-12050-101: RNCC: 5 | RNVC: 9
S694-4-12-50R: RNCC: 5 | RNVC: 9
2221-12050-101: RNCC: 5 | RNVC: 9
S694-4-12-50: RNCC: 5 | RNVC: 9
2121-12050-101: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-4140
Electrical Conduit Adapter

004254140
533405-300: RNCC: 3 | RNVC: 2
2121-20037-101: RNCC: 5 | RNVC: 9
21-21-20037-101: RNCC: 5 | RNVC: 9
S694-4-20-37R: RNCC: 5 | RNVC: 9
2221-20037-101: RNCC: 5 | RNVC: 9

9 Feb 1972

5975-00-425-0524
Junction Box

004250524
10937846: RNCC: 3 | RNVC: 2

12 Apr 1971

5975-00-424-3403
Igni Shielding Assy

004243403
291508: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-423-9763
Suspension Clamp

004239763
L4210: RNCC: 3 | RNVC: 1

4 May 1974

5975-00-423-9727
Suspension Clamp

004239727
L4208: RNCC: 3 | RNVC: 1

4 May 1974

5975-00-423-9639
Suspension Clamp

004239639
L4206: RNCC: 3 | RNVC: 1

4 May 1974

5975-00-423-7122
Electrical Equipment Mounting Base

004237122
EH01034: RNCC: 3 | RNVC: 2
MT4283ARN52V: RNCC: 5 | RNVC: 1

16 Apr 1971

5975-00-423-6021
Electrical Conduit Elbow

004236021
A44325-4: RNCC: 3 | RNVC: 2
E1124-330-10KC: RNCC: 5 | RNVC: 2
A44325-4: RNCC: 5 | RNVC: 9

16 Apr 1971

5975-00-423-6027
Flexible Metal Conduit Assembly

004236027
C175R0500-0908-9898: RNCC: 3 | RNVC: 2
A44325-5: RNCC: 5 | RNVC: 9

16 Apr 1971

5975-00-423-5997
Electrical Conduit Elbow

004235997
E1124-347-10KC: RNCC: 3 | RNVC: 2
A44325-3: RNCC: 5 | RNVC: 9

16 Apr 1971

5975-00-423-3702
Stuffing Tube

004233702
CA1001: RNCC: 3 | RNVC: 2
CA1001: RNCC: 3 | RNVC: 9
6A440: RNCC: 5 | RNVC: 9

9 Apr 1971

5975-00-423-3240
Electrical Cable Nipple

004233240
5040-0405: RNCC: 3 | RNVC: 9
5040-0405: RNCC: 5 | RNVC: 9
5040-0405: RNCC: C | RNVC: 1

16 Apr 1971

5975-00-423-3245
Electrical Cable Nipple

004233245
5040-0406: RNCC: 3 | RNVC: 2
5040-0406: RNCC: 3 | RNVC: 9
5040-0406: RNCC: 5 | RNVC: 9

16 Apr 1971

5975-00-422-4234
Front Panel

004224234
780-0383-001: RNCC: 3 | RNVC: 2

7 Apr 1971

5975-00-422-2760
Rigid Metal Conduit Assembly

004222760
7-26259: RNCC: 3 | RNVC: 2

2 Aug 2004

5975-00-422-1297
Electrical Conduit Bend

004221297
B45131: RNCC: 3 | RNVC: 2

23 Dec 1970

5975-00-421-7504
Electrical Equipment Mounting Base

004217504
481990-150: RNCC: 3 | RNVC: 2
MT4433AWG9: RNCC: 5 | RNVC: 1

2 Feb 1972

5975-00-421-7455
Electrical Equipment Rack

004217455
481961-151: RNCC: 3 | RNVC: 2
MT4430AWG9: RNCC: 5 | RNVC: 1

2 Feb 1972

5975-00-421-7457
Electrical Equipment Rack

004217457
481963-151: RNCC: 3 | RNVC: 2
MT4432AWG9: RNCC: 5 | RNVC: 1

2 Feb 1972

5975-00-421-6528
Electrical-Electronic Equipment Chassis

004216528
34-031888-01: RNCC: 3 | RNVC: 2
34-031888-01: RNCC: 3 | RNVC: 9

2 Feb 1972

5975-00-421-6525
Electrical Equipment Shelf

004216525
767-5467-001: RNCC: 3 | RNVC: 9

2 Feb 1972

5975-00-421-6526
Electrical Equipment Shelf

004216526
777-8588-001: RNCC: 3 | RNVC: 2

2 Feb 1972

5975-00-421-4682
Electrical-Electronic Equipment Chassis

004214682
54220648: RNCC: 3 | RNVC: 9
54220648: RNCC: 5 | RNVC: 2

9 Dec 1970

5975-00-421-4195
Hotline Clamp

004214195
S1530AA: RNCC: 3 | RNVC: 9

9 Dec 1970

5975-00-421-2276
Junction Box

004212276
11D0299H01: RNCC: 3 | RNVC: 2

7 Dec 1970

5975-00-421-0054
Insulator Bracket

004210054
BRA0597: RNCC: 3 | RNVC: 2

10 Sep 1972

5975-00-421-0053
Insulator Bracket

004210053
BRA0599: RNCC: 3 | RNVC: 2

10 Sep 1972

5975-00-420-8986
Electrical Cable Protector

004208986
10886479: RNCC: 3 | RNVC: 2

12 Mar 1969

5975-00-420-7944
Electrical-Electronic Equipment Chassis

004207944
717161-802: RNCC: 3 | RNVC: 2

10 Mar 1969

5975-00-419-7819
Moulded Button Assy

004197819
576214-7: RNCC: 3 | RNVC: 2

2 Dec 1970

5975-00-419-5555
Metal Raceway Elbow

004195555
G4018: RNCC: 3 | RNVC: 2

30 Nov 1970

5975-00-419-3256
Junction Box Cover

004193256
RS14: RNCC: 3 | RNVC: 2

7 Dec 1970

5975-00-419-3105
Electrical Components Tie Down Strap

004193105
11207358-10: RNCC: 3 | RNVC: 2
CM9766-10: RNCC: 5 | RNVC: 1

27 Nov 1970

5975-00-418-4967
Electrical Equipment Mounting Base

004184967
3183350: RNCC: 3 | RNVC: 2
MT4311AQS13B: RNCC: 5 | RNVC: 1
3183350: RNCC: 5 | RNVC: 9

28 Jan 1972

5975-00-417-3321
Electrical Conduit Adapter

004173321
2653644: RNCC: 3 | RNVC: 2
2653644: RNCC: 5 | RNVC: 9
2653644: RNCC: 5 | RNVC: 9

18 Nov 1970

5975-00-416-6588
Blank Panel

004166588
148386: RNCC: 3 | RNVC: 9
148386: RNCC: 5 | RNVC: 9
148386: RNCC: 5 | RNVC: 9
5975PL0942760: RNCC: 6 | RNVC: 9
148386: RNCC: C | RNVC: 1

13 Nov 1970

5975-00-416-6165
Electrical Equipment Mounting Base

004166165
73-00218-001: RNCC: 3 | RNVC: 2

1 May 1974

5975-00-415-6844
Electrical Equipment Mounting Base

004156844
211195-000: RNCC: 3 | RNVC: 2
MT4307ALQ78: RNCC: 5 | RNVC: 1

13 Nov 1970

5975-00-415-6843
Chassis Base

004156843
211138-000: RNCC: 3 | RNVC: 2

13 Nov 1970

5975-00-415-6642
Chassis Base

004156642
A70721-001: RNCC: 3 | RNVC: 2
TC239: RNCC: 5 | RNVC: 2
70721-001: RNCC: 5 | RNVC: 2
A70721-001: RNCC: 5 | RNVC: 2
A70721-001: RNCC: 5 | RNVC: 9

13 Nov 1970

5975-00-414-7143
Electrical Entrance Cap

004147143
STFB6: RNCC: 3 | RNVC: 2
295: RNCC: 5 | RNVC: 1
1256S: RNCC: 5 | RNVC: 9
26-200: RNCC: 5 | RNVC: 9
915: RNCC: 5 | RNVC: 9
ECS-105: RNCC: 5 | RNVC: 9

16 Nov 1970

5975-00-413-2585
Conduit Outlet

004132585
T14: RNCC: 3 | RNVC: 9

29 Apr 1970

5975-00-413-1051
Electrical-Electronic Equipment Chassis

004131051
3195259-1: RNCC: 3 | RNVC: 2
3195259: RNCC: 5 | RNVC: 9

25 Jan 1972

5975-00-412-5818
Electrical Conduit Fitting

004125818
5654-16-090-55: RNCC: 3 | RNVC: 2
803-502-9002: RNCC: 5 | RNVC: 9
803-502-9002: RNCC: 5 | RNVC: 9

1 May 1974

5975-00-412-5323
Electrical Conduit Ferrule

004125323
11-3C6: RNCC: 3 | RNVC: 2

27 Apr 1974

5975-00-412-1333
Electrical-Electronic Equipment Chassis

004121333
A116: RNCC: 3 | RNVC: 2
11160: RNCC: 5 | RNVC: 2

29 Apr 1970

5975-00-411-6294
Switch Conduit End

004116294
60A52B97: RNCC: 3 | RNVC: 2

22 Aug 1969

5975-00-411-4186
Electrical Cable Nipple

004114186
2965931: RNCC: 3 | RNVC: 2
4757673: RNCC: 5 | RNVC: 2
039835: RNCC: 5 | RNVC: 9
74757673: RNCC: 5 | RNVC: 9

27 Aug 1969

5975-00-411-4182
Electrical Conduit Adapter

004114182
REC43: RNCC: 3 | RNVC: 2

27 Aug 1969

5975-00-411-1627
Electrical Equipment Rack

004111627
583611-100: RNCC: 3 | RNVC: 2
583611-100: RNCC: 5 | RNVC: 9

22 Aug 1969

5975-00-411-1483
Interconnecting Box

004111483
9011-031: RNCC: 3 | RNVC: 9

15 Aug 1969

5975-00-411-0486
Electrical Equipment Rack

004110486
1011671-002: RNCC: 3 | RNVC: 2

22 Aug 1969

5975-00-410-8303
Interconnecting Box

004108303
91-340014-1: RNCC: 3 | RNVC: 2
91-340014-1: RNCC: 3 | RNVC: 9

28 Jan 1972

5975-00-410-4224
Electrical Equipment Cabinet

004104224
9001KY2: RNCC: 3 | RNVC: 2

13 Aug 1969

5975-00-410-2017
Radio Set Control Mount

004102017
11072713: RNCC: 3 | RNVC: 2
11072713: RNCC: 5 | RNVC: 2
11072713: RNCC: 5 | RNVC: 2
11072713: RNCC: 5 | RNVC: 9

1 May 1974

5975-00-410-0113
Electrical Components Tie Down Strap

004100113
TC15: RNCC: 3 | RNVC: 2
32Z7: RNCC: 5 | RNVC: 2
TC15A: RNCC: 5 | RNVC: 9
AS40178: RNCC: D | RNVC: 9

6 Nov 1970

5975-00-409-9260
Plug

004099260
AE90936E: RNCC: 3 | RNVC: 2

6 Nov 1970

5975-00-409-9259
Plug With Flange

004099259
AE90936G: RNCC: 3 | RNVC: 2
SE90936G: RNCC: 5 | RNVC: 9

6 Nov 1970

5975-00-409-9023
Junction Box

004099023
4G52490-101B: RNCC: 3 | RNVC: 2

28 Jan 1972

5975-00-409-8994
Special Cable Clamp

004098994
A307979: RNCC: 3 | RNVC: 9
A307979: RNCC: C | RNVC: 1

8 Sep 1972

5975-00-409-8968
Interconnecting Box

004098968
641: RNCC: 3 | RNVC: 2

8 Sep 1972

5975-00-409-8190
Electrical-Electronic Equipment Panel

004098190
R361813: RNCC: 3 | RNVC: 2

22 Jul 1970

5975-00-409-0791
Coaxial Case Carrying

004090791
7916119: RNCC: 3 | RNVC: 2
7916119: RNCC: 5 | RNVC: 2
SKA4850-11: RNCC: 5 | RNVC: 9

15 Jul 1970

5975-00-408-4997
Clamp Speaker Assembly

004084997
SC-C-446246: RNCC: 3 | RNVC: 2

10 Jul 1970

5975-00-408-4460
Cable Separator Wedge

004084460
AT6783SIZE3: RNCC: 3 | RNVC: 9
AT6783SIZE3: RNCC: 5 | RNVC: 9
3WEDGE: RNCC: 5 | RNVC: 9
3WEDGE: RNCC: 5 | RNVC: 9
AT6783SIZE3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-408-4161
Racew Holding Clamp

004084161
44C: RNCC: 3 | RNVC: 2

8 Jul 1970

5975-00-408-4163
Conduit End Cover

004084163
44E: RNCC: 3 | RNVC: 2
44E: RNCC: 5 | RNVC: 9

8 Jul 1970

5975-00-408-3634
Blank Panel

004083634
319883: RNCC: 3 | RNVC: 2
319883: RNCC: 5 | RNVC: 9

8 Jul 1970

5975-00-407-6554
Pole Step

004076554
7236: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-407-6510
Drop Wire Hook

004076510
S4824: RNCC: 3 | RNVC: 9
8031: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-407-6508
Underground Cable Rack Hook

004076508
1131: RNCC: 3 | RNVC: 9
2131: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-407-6495
Electrical Cable Protector

004076495
7537: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-407-6505
Hanger

004076505
7912: RNCC: 3 | RNVC: 9
8912: RNCC: 5 | RNVC: 9
1071: RNCC: 5 | RNVC: 9
8912: RNCC: 5 | RNVC: 9
8912: RNCC: 5 | RNVC: 9
S4720: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-407-6442
Crossarm Brace

004076442
MS39030-1: RNCC: 2 | RNVC: 2
MILH55053: RNCC: 4 | RNVC: 1
PF4: RNCC: 5 | RNVC: 1
J7020: RNCC: 5 | RNVC: 1
7020: RNCC: 5 | RNVC: 9
8020: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-407-6371
Lance Pole

004076371
SCD25393: RNCC: 3 | RNVC: 2
23-76: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-406-4752
Electrical Conduit Coupling Nut

004064752
10-183521-16: RNCC: 3 | RNVC: 2

15 Apr 1970

5975-00-406-4753
Electrical Conduit Coupling Nut

004064753
10-183521-18: RNCC: 3 | RNVC: 2

15 Apr 1970

5975-00-406-4434
Electrical-Electronic Equipment Chassis

004064434
A143: RNCC: 3 | RNVC: 2

29 Apr 1970

5975-00-406-4429
Electrical-Electronic Equipment Chassis

004064429
A120: RNCC: 3 | RNVC: 2

17 Apr 1970

5975-00-406-4424
Electrical-Electronic Equipment Chassis

004064424
A111: RNCC: 3 | RNVC: 2
11110: RNCC: 5 | RNVC: 2

17 Apr 1970

5975-00-406-1661
Dead Guy Grip Clamp

004061661
AWDE4122: RNCC: 3 | RNVC: 2

10 Apr 1970

5975-00-406-0023
Junction Box

004060023
384HB: RNCC: 3 | RNVC: 2

14 Apr 1971

5975-00-405-4848
Junction Box

004054848
2483075: RNCC: 3 | RNVC: 2

14 Apr 1971

5975-00-405-1928
Electrical Conduit

004051928
10937531: RNCC: 3 | RNVC: 2

31 Mar 1971

5975-00-404-7476
Rigid Metal Conduit

004047476
8449956: RNCC: 3 | RNVC: 2

6 Aug 1969

5975-00-404-3656
Transition Cable

004043656
65A5A3-2: RNCC: 3 | RNVC: 2

1 Aug 1969

5975-00-404-3655
Electrical Box Connector

004043655
64A63C803-3: RNCC: 3 | RNVC: 2

1 Aug 1969

5975-00-404-1743
Electrical Equipment Rack

004041743
RA22-6: RNCC: 3 | RNVC: 2

30 Jul 1969

5975-00-404-1046
Junction Box

004041046
B02330400: RNCC: 3 | RNVC: 9

8 Aug 1969

5975-00-404-1036
Conduit Outlet

004041036
JR510036A: RNCC: 3 | RNVC: 2

8 Aug 1969

5975-00-403-8561
Electrical Equipment Mounting Base

004038561
274E200G1: RNCC: 3 | RNVC: 2

1 Aug 1969

5975-00-403-4983
Interconnecting Box

004034983
218-37615-3: RNCC: 3 | RNVC: 2

22 Jun 1970

5975-00-402-8499
Conduit Outlet

004028499
X29: RNCC: 3 | RNVC: 2

8 Jun 1970

5975-00-402-8406
Metallic Raceway

004028406
V2100B: RNCC: 3 | RNVC: 2
2100BUNSC0RED: RNCC: 5 | RNVC: 9
11062110-1: RNCC: 5 | RNVC: 9

1 Jun 1970

5975-00-402-8405
Cover Raceway Conduit

004028405
2100CAUNSCORED: RNCC: 3 | RNVC: 2
2100CUNSC0RED: RNCC: 5 | RNVC: 2

1 Jun 1970

5975-00-402-7291
Cover Assembly

004027291
MTS1446: RNCC: 3 | RNVC: 2

12 Jan 1972

5975-00-402-4493
Blank Panel

004024493
SFA1842: RNCC: 3 | RNVC: 2
600089P12: RNCC: 5 | RNVC: 1
RI-013-121: RNCC: 5 | RNVC: 9

13 Apr 1970

5975-00-402-2387
Electrical Conduit Adapter

004022387
9-20E10: RNCC: 3 | RNVC: 2

3 Apr 1970

5975-00-401-9913
Electrical Box Connector

004019913
4C0S316: RNCC: 3 | RNVC: 2

1 Apr 1970

5975-00-401-9734
Electrical Equipment Leg

004019734
193-032-1: RNCC: 3 | RNVC: 2

1 Apr 1970

5975-00-401-3707
Junction Box

004013707
384NL: RNCC: 3 | RNVC: 2
522: RNCC: 5 | RNVC: 2
806-S: RNCC: 5 | RNVC: 2

13 Jan 1972

5975-00-401-1840
Electrical Equipment Mounting Base

004011840
MT4116ACQ5: RNCC: 3 | RNVC: 2
671616-101: RNCC: 5 | RNVC: 2
89-161305-3: RNCC: 7 | RNVC: 2

28 Nov 1969

5975-00-401-1838
Electrical Equipment Mounting Base

004011838
MT4115ACQ5: RNCC: 3 | RNVC: 2
671615-101: RNCC: 5 | RNVC: 2
89-161305-1: RNCC: 7 | RNVC: 2

28 Nov 1969

5975-00-401-0892
Ring

004010892
CR2C: RNCC: 3 | RNVC: 2
10159078: RNCC: 5 | RNVC: 9
10159078: RNCC: 7 | RNVC: 2

13 Jan 1972

5975-00-400-7953
Junction Box

004007953
13214E0904: RNCC: 3 | RNVC: 2
360-00373C900: RNCC: 5 | RNVC: 2

14 Nov 1969

5975-00-400-7260
Electrical-Electronic Equipment Chassis

004007260
SM-C-414149: RNCC: 3 | RNVC: 2
5820004007260: RNCC: 5 | RNVC: 9
5820004007260: RNCC: 6 | RNVC: 9

5 Mar 1969

5975-00-400-4391
Console Shelf

004004391
E5861-7PCS1: RNCC: 3 | RNVC: 2
5297-7: RNCC: 3 | RNVC: 9

28 Feb 1969

5975-00-400-4397
Separator Pos Shelf

004004397
5297-3: RNCC: 3 | RNVC: 9
E5861-7SPS1: RNCC: 5 | RNVC: 2

28 Feb 1969

5975-00-400-4398
Flight Data Console

004004398
A-1679: RNCC: 3 | RNVC: 2
E5861-4FDC1: RNCC: 5 | RNVC: 2
5297-4: RNCC: 5 | RNVC: 9

28 Feb 1969

5975-00-400-4393
Panel And Frame Assembly

004004393
5297-1: RNCC: 3 | RNVC: 9
E5861-6SIC1: RNCC: 5 | RNVC: 9

28 Feb 1969

5975-00-400-4388
Display Strip Holder

004004388
5297-13: RNCC: 3 | RNVC: 2
E5861-11SDU1: RNCC: 5 | RNVC: 2
5297-13: RNCC: 5 | RNVC: 9

28 Feb 1969

5975-00-400-4390
Console Canopy

004004390
5297-6-1B: RNCC: 3 | RNVC: 9
E5861-30IC2: RNCC: 5 | RNVC: 9

28 Feb 1969

5975-00-400-4389
Console Canopy

004004389
5297-6-1A: RNCC: 3 | RNVC: 9
E5861-30IC1: RNCC: 5 | RNVC: 9

28 Feb 1969

5975-00-400-4387
Console Coordinator

004004387
5297-8: RNCC: 3 | RNVC: 9
E5861-5CIC1: RNCC: 5 | RNVC: 9

28 Feb 1969

5975-00-400-4396
Blank Panel

004004396
E5861-2SPP1: RNCC: 3 | RNVC: 2
5297-2-91: RNCC: 3 | RNVC: 9

28 Feb 1969

5975-00-400-2630
Strain Electrical Conductor Clamp

004002630
ND0104: RNCC: 3 | RNVC: 2
ND517: RNCC: 5 | RNVC: 9

28 Feb 1969

5975-00-398-9716
Junction Box

003989716
74539: RNCC: 3 | RNVC: 2

15 Apr 1974

5975-00-397-7404
Electrical-Electronic Equipment Chassis

003977404
102529: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-397-3713
Electrical Equipment Cabinet

003973713
ME7114: RNCC: 3 | RNVC: 2
ME7114: RNCC: 5 | RNVC: 9

15 Apr 1974

5975-00-396-2255
Junction Box

003962255
V5741: RNCC: 3 | RNVC: 2
5741: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-393-2096
Electrical Cable Splice Protector

003932096
S6829-120IN: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-392-7847
Blank Panel

003927847
SM-B-157346: RNCC: 3 | RNVC: 2
BP3252: RNCC: 5 | RNVC: 2
SM-B-157346: RNCC: 5 | RNVC: 2
773LX: RNCC: 5 | RNVC: 9
11997: RNCC: 5 | RNVC: 9
52808: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-392-2006
Relay Clamp

003922006
123481: RNCC: 3 | RNVC: 2
123481: RNCC: 3 | RNVC: 9
123481: RNCC: 5 | RNVC: 9
123481: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-392-2016
Support Clamp

003922016
123958: RNCC: 3 | RNVC: 2
123958: RNCC: 3 | RNVC: 9
123958: RNCC: 5 | RNVC: 9
123958: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-391-6357
Electrical Equipment Rack Base

003916357
514R062H01: RNCC: 3 | RNVC: 2
514R062H01: RNCC: 5 | RNVC: 2
514R062H01: RNCC: 5 | RNVC: 9

25 Mar 1974

5975-00-391-6013
Conduit Connector

003916013
A5630: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-391-1108
Junction Box

003911108
1546T: RNCC: 3 | RNVC: 2
1524: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-391-0376
Electrical Equipment Mounting Base

003910376
900-0101: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-390-9719
Base Positioning

003909719
88-3021: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-390-9621
Electrical Equipment Mounting Base

003909621
MT1136APS20B: RNCC: 3 | RNVC: 2
7408597GP1: RNCC: 5 | RNVC: 9
A17113: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-390-5749
Electrical Equipment Mounting Base

003905749
MT1292USM25B: RNCC: 3 | RNVC: 2
2293: RNCC: 5 | RNVC: 9
31D1379: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-390-3893
Electrical-Electronic Equipment Chassis

003903893
25605-501-21: RNCC: 3 | RNVC: 2

28 Mar 1974

5975-00-389-6958
Electrical Conduit Bushing

003896958
1188823: RNCC: 3 | RNVC: 2

25 Mar 1974

5975-00-388-9589
Electrical Conduit Coupling

003889589
8021296: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-387-3840
Blank Panel

003873840
K7809097-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-387-3582
Mounting Brush Hold

003873582
A3717: RNCC: 3 | RNVC: 9
480802-6: RNCC: 5 | RNVC: 2
480802PC6: RNCC: 5 | RNVC: 2
480802-6: RNCC: 5 | RNVC: 9
480802PC6: RNCC: 5 | RNVC: 9
D8116-6: RNCC: 5 | RNVC: 9
D8116-6: RNCC: C | RNVC: 1
A3717: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-386-4998
Rigid Metal Conduit Assembly

003864998
103875: RNCC: 3 | RNVC: 2
103875: RNCC: 5 | RNVC: 9

21 Mar 1974

5975-00-386-4990
Rigid Metal Conduit Assembly

003864990
111302: RNCC: 3 | RNVC: 2
111302: RNCC: 5 | RNVC: 9

21 Mar 1974

5975-00-386-5004
Rigid Metal Conduit Assembly

003865004
114183: RNCC: 3 | RNVC: 2
114183: RNCC: 5 | RNVC: 9

21 Mar 1974

5975-00-386-5006
Rigid Metal Conduit Assembly

003865006
114146: RNCC: 3 | RNVC: 2
114146: RNCC: 5 | RNVC: 9

21 Mar 1974

5975-00-386-4993
Rigid Metal Conduit Assembly

003864993
72200: RNCC: 3 | RNVC: 2
72200: RNCC: 5 | RNVC: 9

21 Mar 1974

5975-00-383-1317
Cover

003831317
506: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-383-1336
Connection Cover

003831336
706: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-383-0551
Electrical Conductor Bushing

003830551
2144941-1: RNCC: 3 | RNVC: 2
2144941-1: RNCC: 5 | RNVC: 9

21 Mar 1974

5975-00-382-6883
Junction Box

003826883
92201: RNCC: 3 | RNVC: 2
LD256767: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-382-4696
Junction

003824696
422295PC1: RNCC: 3 | RNVC: 2
422295: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-382-4802
Strain Electrical Conductor Clamp

003824802
592712PC2: RNCC: 3 | RNVC: 2
592712PC2: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-382-4697
Strain Electrical Conductor Clamp

003824697
422295PC2: RNCC: 3 | RNVC: 2
422295PC2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-382-2722
Junction

003822722
505925PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-382-0721
Stuffing Tube

003820721
200818PC2: RNCC: 3 | RNVC: 2
200818PC2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-381-6917
Cable Hanger

003816917
166204PC52: RNCC: 3 | RNVC: 2
166204-52: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-381-6959
Stop Hanger

003816959
166367PC34: RNCC: 3 | RNVC: 2
166367PC34: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-381-6916
Cable Hanger

003816916
166204PC48: RNCC: 3 | RNVC: 2
166204-48: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-381-5605
Conduit

003815605
493621PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-381-3850
Stuffing Tube Packing Nut

003813850
117396PC4: RNCC: 3 | RNVC: 2
117396PC4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-380-5753
Stuffing Tube

003805753
233082PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-378-5474
Electrical-Electronic Equipment Chassis

003785474
SC-C-25180: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-378-5313
Raceway Conduit Cover

003785313
66-609: RNCC: 3 | RNVC: 2
66-609: RNCC: 5 | RNVC: 9
11834413: RNCC: 5 | RNVC: 9
2100C: RNCC: 5 | RNVC: 9
0099-3-3058: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-378-1574
Stuffing Tube

003781574
C2793C: RNCC: 3 | RNVC: 2
C2793C: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-378-1609
Stuffing Tube

003781609
548638: RNCC: 3 | RNVC: 2
4824-3113743PC548638: RNCC: 5 | RNVC: 2
4824-3113742PC548638: RNCC: 5 | RNVC: 2
4824-3130086REVB: RNCC: 5 | RNVC: 2
4824-3113741REVAPC548638: RNCC: 5 | RNVC: 2
4824-3113744PC548638: RNCC: 5 | RNVC: 2
4824-3113750PC548638: RNCC: 5 | RNVC: 2
548638: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-378-1288
Fanning Strip

003781288
474620-002: RNCC: 3 | RNVC: 2

16 Mar 1974

5975-00-373-5066
Electrical Conduit Adapter

003735066
72304-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-373-3851
Flexible Metal Conduit Assembly

003733851
114148: RNCC: 3 | RNVC: 2
114148: RNCC: 5 | RNVC: 9

12 Mar 1974

5975-00-373-3834
Flexible Metal Conduit Assembly

003733834
11304: RNCC: 3 | RNVC: 2
11304: RNCC: 5 | RNVC: 9

12 Mar 1974

5975-00-372-6265
Electrical Equipment Mounting Base

003726265
123SCAV376-3: RNCC: 1 | RNVC: 2
121890-2: RNCC: 3 | RNVC: 2
B04 106: RNCC: 5 | RNVC: 2
123SCAV376-3: RNCC: 5 | RNVC: 9

12 Mar 1974

5975-00-372-5848
Blank Panel

003725848
PS1257MG OR WH: RNCC: 3 | RNVC: 2
PS1257: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-372-4812
Electrical Conduit Adapter

003724812
CRN1682-35-07-12: RNCC: 3 | RNVC: 2
GA800TG4-14: RNCC: 7 | RNVC: 2

12 Mar 1974

5975-00-372-4811
Electrical Conduit Adapter

003724811
CRN1682-35-10-12: RNCC: 3 | RNVC: 2
GA800TG4-18: RNCC: 7 | RNVC: 2

12 Mar 1974

5975-00-372-4777
Blank Panel

003724777
PN17: RNCC: 3 | RNVC: 2

12 Mar 1974

5975-00-372-4813
Electrical Conduit Adapter

003724813
CRN1682-14-15-12: RNCC: 3 | RNVC: 2
GA800TG3-23: RNCC: 7 | RNVC: 2

12 Mar 1974

5975-00-372-4808
Electrical Conduit Adapter

003724808
CRN1682-14-10-12: RNCC: 3 | RNVC: 2
GA800TG3-18: RNCC: 7 | RNVC: 2

12 Mar 1974

5975-00-372-3735
Electrical Conduit Coupling

003723735
2150: RNCC: 3 | RNVC: 2
P/N TK127A: RNCC: 5 | RNVC: 2
TK-127: RNCC: 5 | RNVC: 9
5042: RNCC: 5 | RNVC: 9
1036-S: RNCC: 5 | RNVC: 9
20406: RNCC: 5 | RNVC: 9
466: RNCC: 5 | RNVC: 9
736: RNCC: 5 | RNVC: 9

8 Mar 1974

5975-00-372-3640
Electrical-Electronic Equipment Chassis

003723640
504-8267-003: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-372-1415
Bushing

003721415
354A6269: RNCC: 3 | RNVC: 2
13788: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-371-6592
Cable Clamp

003716592
3402124: RNCC: 3 | RNVC: 2
3271459: RNCC: E | RNVC: 8

3 Mar 1974

5975-00-370-9388
Interconnecting Box

003709388
61716002-301A: RNCC: 3 | RNVC: 2

3 Mar 1974

5975-00-370-3991
Electrical Cable Nipple

003703991
2394409: RNCC: 3 | RNVC: 2
2394409: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-1792
Blank Panel

003701792
151834: RNCC: 3 | RNVC: 2
151834: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-1463
Blank Panel

003701463
152403: RNCC: 3 | RNVC: 2
152403: RNCC: 3 | RNVC: 9
152403: RNCC: 5 | RNVC: 9
152403: RNCC: 5 | RNVC: 9
152403: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-1460
Blank Panel

003701460
152400: RNCC: 3 | RNVC: 2
152400: RNCC: 5 | RNVC: 9
152400: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-1415
Blank Panel

003701415
152627: RNCC: 3 | RNVC: 2
152627: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-1179
Cable Hanger

003701179
151955: RNCC: 3 | RNVC: 2
151955: RNCC: 5 | RNVC: 9
151955: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-0401
Blank Panel

003700401
150740: RNCC: 3 | RNVC: 2
150740: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-369-7306
Electrical Equipment Mounting Base

003697306
622-0701-001: RNCC: 3 | RNVC: 2

3 Mar 1974

5975-00-369-6793
Electrical Equipment Mounting Base

003696793
MT-284/ART-13: RNCC: 3 | RNVC: 2
IZ6763-284: RNCC: 3 | RNVC: 2
500-4594-005: RNCC: 3 | RNVC: 2
176763-284: RNCC: 5 | RNVC: 2
C324: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-369-5973
Radio Frequency Cable Splicing Kit

003695973
RE49F515G: RNCC: 3 | RNVC: 2
MX904U: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-369-4996
Bridle Ring

003694996
MS39040-2: RNCC: 2 | RNVC: 2
MILH55053: RNCC: 4 | RNVC: 1
C: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-369-4999
Drive Ring

003694999
MS39045-1: RNCC: 2 | RNVC: 2
801: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-366-7419
Chassis Base

003667419
BPA1514: RNCC: 3 | RNVC: 2

3 Mar 1974

5975-00-364-5010
Pole Gain

003645010
J6062: RNCC: 3 | RNVC: 2

22 Feb 1974

5975-00-361-7793
Electrical Cable Nipple

003617793
SP327257: RNCC: 3 | RNVC: 2
327257: RNCC: 5 | RNVC: 1
327257: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-361-4495
Conduit Outlet

003614495
349: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-361-0313
Wireway Base

003610313
SMB751637: RNCC: 3 | RNVC: 2

18 Feb 1974

5975-00-359-6030
Box

003596030
995889: RNCC: 3 | RNVC: 9
995889: RNCC: 5 | RNVC: 2
SER48782: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-357-0968
Insulator Bracket

003570968
0327: RNCC: 3 | RNVC: 9

8 Feb 1974

5975-00-356-4943
Metal Wedge

003564943
AT6783TYPE4: RNCC: 3 | RNVC: 9
AT6783TYPE4: RNCC: 5 | RNVC: 9
AT6783TYPE4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-356-4944
Metal Wedge

003564944
AT6783TYPE6: RNCC: 3 | RNVC: 9
AT6783TYPE6: RNCC: 5 | RNVC: 9
AT6783TYPE6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-356-4946
Metal Wedge

003564946
AT6783TYPE8: RNCC: 3 | RNVC: 9
AT6783TYPE8: RNCC: 5 | RNVC: 9
AT6783TYPE8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-356-3686
Strand Connector

003563686
8900: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-356-3680
Cable Rack Extension

003563680
1101: RNCC: 3 | RNVC: 9
1101: RNCC: 5 | RNVC: 9
2101: RNCC: 5 | RNVC: 9
2101: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-355-9361
Guy Plate

003559361
SCB30440: RNCC: 3 | RNVC: 2
207-33: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-355-9210
Electrical Equipment Mounting Base

003559210
505-0174-004: RNCC: 3 | RNVC: 9
2Z6763-822A: RNCC: 5 | RNVC: 2
MT822AARC27: RNCC: 5 | RNVC: 2
MT822AARC27: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-355-9219
Electrical Equipment Mounting Base

003559219
12705-000: RNCC: 3 | RNVC: 9
MT1046ARN30: RNCC: 5 | RNVC: 1
E21-1: RNCC: 5 | RNVC: 9
12705-0001: RNCC: 5 | RNVC: 9
12705-0002: RNCC: 5 | RNVC: 9
12705-1B: RNCC: 5 | RNVC: 9
M18: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-355-8970
Electrical Equipment Mounting Base

003558970
SM-D-34878: RNCC: 3 | RNVC: 2
SCD34878: RNCC: 5 | RNVC: 2
MX-1116/GRA-4: RNCC: 5 | RNVC: 2
101A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-355-4810
Stuffing Tube

003554810
M24235/8-004: RNCC: 2 | RNVC: 2
MIL-S-24235/8: RNCC: 4 | RNVC: 1
9000S6202F73902REV0TYPE6SIZED: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-355-4815
Stuffing Tube

003554815
9000S6202F73902REV0TYPE5SIZED: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-355-4762
Stuffing Tube Plug

003554762
9000S6202F73937SYMB0L24024: RNCC: 3 | RNVC: 2
73937: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-355-4757
Stuffing Tube Plug

003554757
M24235/19-015: RNCC: 2 | RNVC: 2
100NST: RNCC: 5 | RNVC: 1
9000S6202F73937SIZEN: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-355-4744
Stuffing Tube Plug

003554744
9000S6202F73937SIZE0B: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-355-4056
Electrical Conduit Elbow

003554056
3129: RNCC: 3 | RNVC: 2
23850: RNCC: 5 | RNVC: 2
3129: RNCC: 5 | RNVC: 9
848-14: RNCC: 5 | RNVC: 9
848-14: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-351-8195
Electrical Equipment Cabinet

003518195
AS1046: RNCC: 3 | RNVC: 2
MILR10138: RNCC: 4 | RNVC: 1
CY615URR: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-351-7822
Electrical Wall Plate

003517822
92775: RNCC: 3 | RNVC: 2
92775: RNCC: 5 | RNVC: 2
92775: RNCC: 5 | RNVC: 9
92775: RNCC: 5 | RNVC: 9
92775: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-350-5452
Tubing Fitting Junction

003505452
B3109: RNCC: 3 | RNVC: 2

20 Mar 1970

5975-00-348-5620
Electrical Conduit Adapter

003485620
1121BA024-014: RNCC: 3 | RNVC: 2
GA800NH24-14: RNCC: 7 | RNVC: 2

17 Jan 1974

5975-00-347-6918
Electrical Box Connector

003476918
ST10: RNCC: 3 | RNVC: 9

24 Jan 1974

5975-00-347-6903
Junction Box

003476903
A6R44: RNCC: 3 | RNVC: 2

24 Jan 1974

5975-00-346-8169
Electrical Equipment Leg Section

003468169
8211736: RNCC: 3 | RNVC: 2
8211736: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-345-0683
Splice Coupling

003450683
P164490: RNCC: 3 | RNVC: 9
P164490: RNCC: 5 | RNVC: 2
P164490: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-345-0679
Cable Extension Arm

003450679
7921: RNCC: 3 | RNVC: 9
8921: RNCC: 5 | RNVC: 9
8921: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-345-0492
Plate Junction

003450492
CS2590-0003: RNCC: 3 | RNVC: 2
148C257G1: RNCC: 5 | RNVC: 9
148C257G1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-344-7208
Electrical Conduit Locknut

003447208
393992PC5: RNCC: 3 | RNVC: 2
T51J12PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-344-4258
Grounding Rod

003444258
8524443: RNCC: 3 | RNVC: 2
342C182G03: RNCC: 5 | RNVC: 1
342C182G03: RNCC: 5 | RNVC: 1
347C138H01: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-343-9449
Electrical Equipment Mounting Base

003439449
659829: RNCC: 3 | RNVC: 2
A0LAX909: RNCC: 5 | RNVC: 2
659829: RNCC: 5 | RNVC: 9
661850: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-343-9466
Electrical Equipment Mounting Base

003439466
88200M: RNCC: 3 | RNVC: 2
88200: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-342-9880
Electrical Grounding Plate

003429880
834584-2: RNCC: 3 | RNVC: 2
834584-2: RNCC: 5 | RNVC: 9

15 Jan 1974

5975-00-342-9848
Electrical Grounding Plate

003429848
834584-1: RNCC: 3 | RNVC: 2

15 Jan 1974

5975-00-342-2262
Electrical Equipment Mounting Base

003422262
MT1218U: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-340-2825
Electrical Wall Plate

003402825
P24X: RNCC: 3 | RNVC: 1
2137B: RNCC: 3 | RNVC: 2
91122: RNCC: 3 | RNVC: 2
71122: RNCC: 3 | RNVC: 2
14-2BR: RNCC: 5 | RNVC: 2
85025: RNCC: 5 | RNVC: 9
91122: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-340-2882
Mounting

003402882
M9728546REV1PT1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-339-3313
Protector Electrica

003393313
238236: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-339-1499
Electrical Equipment Mounting Base

003391499
L283855-2: RNCC: 3 | RNVC: 2
SMC134197: RNCC: 5 | RNVC: 9
MT1620AR: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-338-8614
Chassis Base

003388614
23434: RNCC: 3 | RNVC: 2
82489: RNCC: 5 | RNVC: 9
82489: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-338-6242
Electrical Equipment Mounting Base

003386242
675959: RNCC: 3 | RNVC: 2
MT-1254/APN-59: RNCC: 5 | RNVC: 2

1 Jan 1963

Load More Results