What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 191 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 191of 491

5975-00-689-5473
Electrical Bushing

006895473
74999812: RNCC: 3 | RNVC: 2
4999812: RNCC: 5 | RNVC: 9

25 Mar 1972

5975-00-688-2724
Junction Box Cover

006882724
2070037: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-687-2196
Conduit Outlet

006872196
OET2: RNCC: 3 | RNVC: 2
OET2: RNCC: 5 | RNVC: 2
OET2: RNCC: 5 | RNVC: 2
0ET2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-687-1968
Electrical Equipment Cabinet

006871968
GB887: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-686-0206
Electrical Equipment Rack

006860206
RR197: RNCC: 3 | RNVC: 1
101076-03: RNCC: 5 | RNVC: 2
RR1369MG: RNCC: 5 | RNVC: 2
RR-1369HG: RNCC: 5 | RNVC: 9
EQR7: RNCC: 5 | RNVC: 9
RR197: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-685-9549
Blank Panel

006859549
PS1255MG: RNCC: 3 | RNVC: 2
QMPA19105: RNCC: 3 | RNVC: 2
9002-219SIZEF: RNCC: 5 | RNVC: 9
PS1255LG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-685-9548
Blank Panel

006859548
PS1254MG: RNCC: 3 | RNVC: 2
PS1254HG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-685-9544
Blank Panel

006859544
PS-1250: RNCC: 3 | RNVC: 2
99-231: RNCC: 5 | RNVC: 1
9002-007 SIZE A: RNCC: 5 | RNVC: 9
DL84-5121: RNCC: 5 | RNVC: 9
10-82-258: RNCC: 5 | RNVC: 9
PS1250HG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-685-9546
Blank Panel

006859546
PS1252MG: RNCC: 3 | RNVC: 2
H6602: RNCC: 5 | RNVC: 2
DL84-5120: RNCC: 5 | RNVC: 2
PS1252LG: RNCC: 5 | RNVC: 9
PS1252HG: RNCC: 5 | RNVC: 9
RI-013-033: RNCC: 5 | RNVC: 9
9002-220 SIZE C: RNCC: 5 | RNVC: 9
SP212HG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-685-9542
Blank Panel

006859542
DL88-5141: RNCC: 3 | RNVC: 2
PA3107MG: RNCC: 5 | RNVC: 9
PA3107HG: RNCC: 5 | RNVC: 9
RI-014-072: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-685-9539
Blank Panel

006859539
CP-002-90-042: RNCC: 3 | RNVC: 2
AL6678: RNCC: 3 | RNVC: 2
DL84-5118: RNCC: 3 | RNVC: 2
H6678-3: RNCC: 5 | RNVC: 2
RI-014-042: RNCC: 5 | RNVC: 9
9001-741D: RNCC: 5 | RNVC: 9
5062-4: RNCC: 5 | RNVC: 9
PA3104HG: RNCC: 5 | RNVC: 9
PA3104LG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-685-9540
Blank Panel

006859540
SFA3165: RNCC: 3 | RNVC: 2
PA3105HG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-684-8128
Service Wedge Clamp

006848128
W20-1: RNCC: 3 | RNVC: 2
7287: RNCC: 5 | RNVC: 9
7082: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-682-7759
Stuffing Tube Packing Nut

006827759
REB101374-2REVN: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-682-6329
Blank Panel

006826329
163790: RNCC: 3 | RNVC: 2
163790: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-682-4391
Blank Panel

006824391
154479: RNCC: 3 | RNVC: 2
TP154479: RNCC: 5 | RNVC: 9
154479: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-682-0519
Cable Hanger

006820519
F44441: RNCC: 3 | RNVC: 9
SMB363104: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-682-0461
Electrical Box Connector

006820461
XC-480: RNCC: 3 | RNVC: 2
2101: RNCC: 5 | RNVC: 2
405: RNCC: 5 | RNVC: 9
1001: RNCC: 5 | RNVC: 9
XC-480: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-682-0343
Junction Box Cover

006820343
605: RNCC: 3 | RNVC: 2
72C15: RNCC: 3 | RNVC: 2
WJ800: RNCC: 4 | RNVC: 1
128: RNCC: 4 | RNVC: 1

1 Jan 1960

5975-00-682-0308
Electrical Box Connector

006820308
9081271: RNCC: 3 | RNVC: 2
STN-38: RNCC: 5 | RNVC: 9
20000: RNCC: 5 | RNVC: 9
E-19-SS: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-8707
Electrical-Electronic Equipment Chassis

006818707
CU3005A: RNCC: 3 | RNVC: 2
CU3005: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-681-8703
Electrical-Electronic Equipment Chassis

006818703
CU3001: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-8702
Electrical-Electronic Equipment Chassis

006818702
CU3000: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-681-5638
Junction Box

006815638
1546B: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-4751
Electrical Conduit Sealing Fitting

006814751
ESUF75: RNCC: 3 | RNVC: 2
VA2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-4739
Electrical Conduit Elbow

006814739
217: RNCC: 3 | RNVC: 2
WR32TYPE1: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-681-4723
Electrical Box Connector

006814723
3110: RNCC: 3 | RNVC: 2
67077: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-4716
Electrical Box Connector

006814716
3121: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-4712
Electrical Box Connector

006814712
3137: RNCC: 3 | RNVC: 2
AC-100T: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-681-4258
Conduit Outlet

006814258
FD3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-4070
Electrical Conduit Adapter

006814070
RE64: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-681-3311
Electrical-Electronic Equipment Chassis

006813311
AC-412: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-3181
Conduit Outlet Cover

006813181
470F: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-3183
Conduit Outlet Cover

006813183
870F: RNCC: 3 | RNVC: 2
K250-CM: RNCC: 5 | RNVC: 2
BC-250: RNCC: 5 | RNVC: 9
870F: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-3083
Flexible Nonmetallic Conduit

006813083
UL3: RNCC: 3 | RNVC: 1
LOOM 5/8 ID: RNCC: 3 | RNVC: 9
HHT791: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-2982
Electrical Conduit Adapter

006812982
1585: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-2971
Metallic Raceway

006812971
2600: RNCC: 3 | RNVC: 2
WC582: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-681-2969
Conduit Outlet Cover

006812969
DS24: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-1193
Conduit Outlet

006811193
AA50563-208ACCBA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSCC1: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-678-5958
Electrical Cable Nipple

006785958
31RWHITE: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-678-4874
Electrical-Electronic Equipment Chassis

006784874
121088-02: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-677-7803
Blank Panel

006777803
156015: RNCC: 3 | RNVC: 2
156015: RNCC: 5 | RNVC: 2
156015: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-677-7036
Blank Panel

006777036
156069: RNCC: 3 | RNVC: 9
156069: RNCC: 5 | RNVC: 2
156069: RNCC: 5 | RNVC: 9
156069: RNCC: 5 | RNVC: 9
156069: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-677-4345
Chassis Base

006774345
156460: RNCC: 3 | RNVC: 2
156460: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-676-9557
Electrical Equipment Mounting Base

006769557
2348-3: RNCC: 3 | RNVC: 9
1307159-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-676-8392
Electrical Conduit End Seal Disk

006768392
822: RNCC: 3 | RNVC: 2
11557: RNCC: 5 | RNVC: 9
414-111-P: RNCC: 5 | RNVC: 9
1668: RNCC: 5 | RNVC: 9
37: RNCC: 5 | RNVC: 9
97: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-676-7254
Electrical Equipment Mounting Base

006767254
ED71A1: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-676-7018
Electrical Equipment Cabinet

006767018
CR1741: RNCC: 3 | RNVC: 2
CR-1741LG: RNCC: 5 | RNVC: 9
DCR80: RNCC: 5 | RNVC: 9
CR1741G: RNCC: 5 | RNVC: 9
DL-128-LH: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-676-7017
Flexible Gooseneck

006767017
GN19: RNCC: 3 | RNVC: 2
GN19: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-676-6002
Flexible Conduit

006766002
42257-890: RNCC: 3 | RNVC: 2
B6865-3-8-9-10: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-676-2819
Cable Button

006762819
541-5182-002: RNCC: 3 | RNVC: 2
5415182-002: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-676-0928
Electrical Equipment Mounting Base

006760928
522-0406-004: RNCC: 3 | RNVC: 9
MT2057ARD13: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-675-8661
Chassis Base

006758661
85977: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-675-8420
Electrical Equipment Mounting Base

006758420
129699-01: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-675-3308
Blank Panel

006753308
158557: RNCC: 3 | RNVC: 2
158557: RNCC: 5 | RNVC: 9
158557: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-674-7969
Cable Hanger

006747969
55259: RNCC: 3 | RNVC: 2
55259: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-674-7974
Cable Hanger

006747974
53811: RNCC: 3 | RNVC: 2
53811: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-674-7939
Cable Hanger

006747939
53810: RNCC: 3 | RNVC: 2
53810: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-673-8614
Blank Panel

006738614
4010162-2: RNCC: 3 | RNVC: 2
4010162-2: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-673-6460
Blank Panel

006736460
542-0188-004: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-673-5417
Drawer Divider

006735417
66D867-1-3: RNCC: 3 | RNVC: 2
202D56P1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-673-5418
Drawer Divider

006735418
66D867-3-3: RNCC: 3 | RNVC: 2
202D56P3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-673-5416
Drawer Divider

006735416
66D867-10-1: RNCC: 3 | RNVC: 2
202D55P3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-673-5415
Drawer Divider

006735415
66D867-6-1: RNCC: 3 | RNVC: 2
202D55P2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-673-5414
Drawer Divider

006735414
66D867-2-1: RNCC: 3 | RNVC: 2
202D55P1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-673-5409
Drawer Divider

006735409
66D867-1-2: RNCC: 3 | RNVC: 2
202C48P1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-673-3105
Electrical Equipment Mounting Base

006733105
522-0933-005: RNCC: 3 | RNVC: 2
390E2: RNCC: 5 | RNVC: 9
MT2699AARC73: RNCC: 5 | RNVC: 9
MT2699ARC73: RNCC: 5 | RNVC: 9
SMD453401: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-672-9283
Electrical Conductor Bushing

006729283
320: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-672-8582
Condui Fitting Assy

006728582
6780809-5: RNCC: 3 | RNVC: 2
6780809-5: RNCC: 5 | RNVC: 2
6780809-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-672-8581
Conduit Fitting Assembly

006728581
6780807-5: RNCC: 3 | RNVC: 2
6780807-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-672-4049
Electrical Equipment Mounting Base

006724049
50081-1: RNCC: 3 | RNVC: 2
50081-1: RNCC: 5 | RNVC: 9

26 Jan 1968

5975-00-672-1476
Clamp

006721476
710312-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-672-0632
Electrical Wall Plate

006720632
6-48223-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-672-0405
Electrical Conduit Coupling

006720405
ICC75: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-671-8122
Electrical Equipment Leg

006718122
SMC338859: RNCC: 3 | RNVC: 2

2 Oct 1970

5975-00-671-5328
Electrical Equipment Mounting Base

006715328
963C52219: RNCC: 3 | RNVC: 9
654BM102-1: RNCC: 5 | RNVC: 2
MT2020ASQ10: RNCC: 5 | RNVC: 2
52219: RNCC: 5 | RNVC: 9
52219: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-671-3528
Electrical-Electronic Equipment Chassis

006713528
85231820030: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-671-2344
Raceway Coupling

006712344
2101A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-670-5213
Cable Strain Relief Bushing

006705213
1327: RNCC: 3 | RNVC: 2
SR-11K-2: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-669-9822
Junction Box

006699822
41G20: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-669-9826
Junction Box

006699826
41G113: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-669-9688
Conduit Outlet Cover

006699688
DS35: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-669-9467
Electrical Box Connector

006699467
8197996: RNCC: 3 | RNVC: 2
2522: RNCC: 3 | RNVC: 2
2522: RNCC: 5 | RNVC: 2
2035-12-375: RNCC: 5 | RNVC: 2
4805457-1: RNCC: 5 | RNVC: 2
2103N: RNCC: 5 | RNVC: 9
SR505: RNCC: 5 | RNVC: 9
1-176: RNCC: 5 | RNVC: 9
SR505: RNCC: 5 | RNVC: 9
GC800C4C: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-669-9340
Electrical Conduit Ferrule

006699340
AN3053-28: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-669-9120
Junction Box Cover

006699120
10-94927: RNCC: 3 | RNVC: 2
10-94927: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-9013
Electrical Cable Nipple

006699013
1321471: RNCC: 3 | RNVC: 2
1321471: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-8453
Junction Box

006698453
5734A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-669-7351
Electrical Equipment Cabinet

006697351
55D54348: RNCC: 3 | RNVC: 9
55D54348: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-7254
Flexible Metal Conduit Assembly

006697254
5334403-576: RNCC: 3 | RNVC: 2
5334403-576: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-7244
Flexible Metal Conduit Assembly

006697244
4394793-510: RNCC: 3 | RNVC: 2
C175-0250-1308-5757: RNCC: 5 | RNVC: 9
4394793-510: RNCC: 5 | RNVC: 9
C175-0250-1308-5757: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-665-3298
Junction Box

006653298
MX1174U: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-665-2673
Electrical Cable Nipple

006652673
5469: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-660-6150
Flexible Metal Conduit Assembly

006606150
20865: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-655-4103
Blank Panel

006554103
606769: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-655-2768
Conduit Outlet

006552768
AA50563-101ALLLF: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LL67WITH670F: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-653-9166
Electrical Standardized Components Case

006539166
1931-10762G2: RNCC: 3 | RNVC: 2
10762G2: RNCC: 3 | RNVC: 2
75106-002: RNCC: 3 | RNVC: 2
CY-2472/UA: RNCC: 5 | RNVC: 2
1105: RNCC: 5 | RNVC: 9
CY2472U: RNCC: 5 | RNVC: 9
10762G2: RNCC: 5 | RNVC: 9
7334762: RNCC: 5 | RNVC: 9
7334762-10: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-653-9167
Electrical Standardized Components Case

006539167
1931-10762G1: RNCC: 3 | RNVC: 2
CS-9167-87126: RNCC: 5 | RNVC: 2
CY-2471/UB: RNCC: 5 | RNVC: 2
CY2471U: RNCC: 5 | RNVC: 9
1031: RNCC: 5 | RNVC: 9
10762G1: RNCC: 5 | RNVC: 9
7334762: RNCC: 5 | RNVC: 9
7334762-30: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-653-9164
Standardized Components Case Drawer

006539164
ASC-SD-3: RNCC: 3 | RNVC: 2
61116: RNCC: 5 | RNVC: 9
DGSC66E2: RNCC: 5 | RNVC: 9
MX2584U: RNCC: 5 | RNVC: 9
1529-9164: RNCC: 5 | RNVC: 9
ASC-SD-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-653-9162
Standardized Components Case Drawer

006539162
ASC-SD-1: RNCC: 3 | RNVC: 2
MX2586U: RNCC: 5 | RNVC: 2
DGSC66E2: RNCC: 5 | RNVC: 9
10111: RNCC: 5 | RNVC: 9
ASC-SD-1: RNCC: 5 | RNVC: 9
1529-9162: RNCC: 5 | RNVC: 9
66E2-10: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-653-9163
Standardized Components Case Drawer

006539163
ASC-SD-2: RNCC: 3 | RNVC: 2
MX2585U: RNCC: 5 | RNVC: 1
81116: RNCC: 5 | RNVC: 9
DGSC66E2: RNCC: 5 | RNVC: 9
66E2-8: RNCC: 5 | RNVC: 9
1529-9163: RNCC: 5 | RNVC: 9
ASC-SD-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-653-9161
Electrical Conduit Coupling Nut

006539161
A6006-1002P1: RNCC: 3 | RNVC: 2
6006-1002P1: RNCC: 5 | RNVC: 9
6006-1002P1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-652-8900
Flying Boom Wi Tube

006528900
5-96333-9: RNCC: 3 | RNVC: 2
5-96333-9: RNCC: 5 | RNVC: 9
8347114-10: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-650-2608
Electri Heater Mold

006502608
2078AY601C: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-649-8987
Case Foot

006498987
9065437: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-649-6939
Junction Box

006496939
9085401: RNCC: 3 | RNVC: 2
9085401: RNCC: 5 | RNVC: 1

8 Mar 1968

5975-00-647-4968
Blank Panel

006474968
9077308: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-644-3682
Electrical Conduit Coupling Nut

006443682
7056641: RNCC: 3 | RNVC: 2
59750006443682: RNCC: 5 | RNVC: 9
5975006443682: RNCC: 5 | RNVC: 9
5975006443682: RNCC: 6 | RNVC: 9
59750006443682: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-644-3182
Conduit Outlet

006443182
A-A-50563: RNCC: 4 | RNVC: 1
LB68 AND 680: RNCC: 5 | RNVC: 2
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-644-2893
Electrical Conductor Bushing

006442893
153031: RNCC: 3 | RNVC: 9
153031: RNCC: 5 | RNVC: 9
153031: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-644-2813
Electrical Conductor Bushing

006442813
1560-2: RNCC: 3 | RNVC: 1
9101318: RNCC: 3 | RNVC: 2
2133444G3: RNCC: 5 | RNVC: 1
1960-2: RNCC: 5 | RNVC: 1
2133444G3: RNCC: 5 | RNVC: 9
425-2117-01-02: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-644-2605
Electrical Conduit Bondnut

006442605
DB11B: RNCC: 3 | RNVC: 2
8168349: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-644-2557
Stuffing Tube Packing Nut

006442557
583310PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-642-8868
Electrical Cable Nipple

006428868
22500: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-642-8873
Electrical Conduit Ferrule

006428873
AN3052-16: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-642-8609
Conduit Outlet Cover

006428609
RSP6: RNCC: 3 | RNVC: 2
RSP6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-642-8523
Stuffing Tube Packing Nut

006428523
GB2021-2: RNCC: 3 | RNVC: 9
SCB42387: RNCC: 5 | RNVC: 1
GB2021-2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-642-8607
Conduit Outlet Cover

006428607
RSP0: RNCC: 3 | RNVC: 2
RSP0: RNCC: 5 | RNVC: 9
9995630-2: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-642-8606
Conduit Outlet

006428606
RS1: RNCC: 3 | RNVC: 2
RS1: RNCC: 3 | RNVC: 2
RS1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-642-7563
Electrical Equipment Cabinet

006427563
3884: RNCC: 3 | RNVC: 2
CR1745: RNCC: 5 | RNVC: 2
DL3513: RNCC: 5 | RNVC: 2
DC3635: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-642-7259
Electrical Conduit Bend

006427259
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-636-4463
Wire Strand Hanger Safety Strap

006364463
J7696: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-636-4408
Electrical Grounding Plate

006364408
ZA224-1004REV2P1: RNCC: 3 | RNVC: 2
244-1004P1: RNCC: 5 | RNVC: 2
ZA224-1004REV2P1: RNCC: 5 | RNVC: 2
244-1004P1: RNCC: 5 | RNVC: 2
244-1004P1: RNCC: 5 | RNVC: 9
ZA224-1004REV2P1: RNCC: 5 | RNVC: 9
9072007: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-636-4413
Electrical Grounding Plate

006364413
AS1095: RNCC: 3 | RNVC: 2
SMB97099: RNCC: 5 | RNVC: 2
603171-1: RNCC: 5 | RNVC: 2
756-5748: RNCC: 5 | RNVC: 9
70084: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-636-4325
Electrical Cable Protector

006364325
128649: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-636-3980
Electrical Cable Protector

006363980
7535: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-636-3356
Electrical Grounding Plate

006363356
1874848: RNCC: 3 | RNVC: 2
7F4548: RNCC: 5 | RNVC: 2
1979389: RNCC: 5 | RNVC: 2
1874848: RNCC: 5 | RNVC: 9
1874848: RNCC: 5 | RNVC: 9
1874848: RNCC: 5 | RNVC: 9
1874848: RNCC: 5 | RNVC: 9
1874848: RNCC: 5 | RNVC: 9
1874848: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-636-1809
Bridle Ring

006361809
MS39040-5: RNCC: 2 | RNVC: 2
823: RNCC: 5 | RNVC: 1
823: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-636-1826
Interior Cable Rack

006361826
H44225-10: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-636-1825
Electrical Conduit Elbow

006361825
10-40695-181: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-636-1725
Electrical Box Connector

006361725
CC1043: RNCC: 3 | RNVC: 2
8176835: RNCC: 5 | RNVC: 2
723347-01: RNCC: 5 | RNVC: 2
8644366: RNCC: 5 | RNVC: 2
G221171: RNCC: 5 | RNVC: 9
CC1043: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-636-1037
Electrical Equipment Rack

006361037
RR1264BT: RNCC: 3 | RNVC: 2
DL89-5157: RNCC: 5 | RNVC: 2
RR1264MG: RNCC: 5 | RNVC: 9
RR1264: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-636-0267
Electrical Conduit Coupling Nut

006360267
118-22C4: RNCC: 3 | RNVC: 2
LS964-4: RNCC: 5 | RNVC: 2
118-22C4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-636-0081
Electrical Wall Plate

006360081
1702: RNCC: 3 | RNVC: 9
579R651H06: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-636-0080
Electrical Conduit Elbow

006360080
38981: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-633-7633
Blank Panel

006337633
603642: RNCC: 3 | RNVC: 2
603642: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-633-7631
Housing

006337631
865349: RNCC: 3 | RNVC: 2
865349: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-633-4924
Junction Box Cover

006334924
SMB157751: RNCC: 3 | RNVC: 2
SMB157751: RNCC: 3 | RNVC: 2
SMB157751: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-632-8772
Circular Cover

006328772
68954PC1: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-631-7775
Synchr Access Cover

006317775
9075644: RNCC: 3 | RNVC: 2

18 Jul 1966

5975-00-631-5816
Vibration Isolator Channel

006315816
2L64X02: RNCC: 3 | RNVC: 2
200-1162-00: RNCC: 5 | RNVC: 9
200-1162-000: RNCC: 5 | RNVC: 9
200-1162-000: RNCC: 5 | RNVC: 9
200-1162-00: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-631-5817
Vibration Isolator Channel

006315817
2L64X01: RNCC: 3 | RNVC: 2
2M64X05: RNCC: 5 | RNVC: 9
200-1161-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-631-3295
Chassis Base

006313295
151537: RNCC: 3 | RNVC: 2
151537: RNCC: 5 | RNVC: 2
151537: RNCC: 5 | RNVC: 9
151537: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-630-8376
Flexible Metal Conduit Assembly

006308376
370090-13: RNCC: 3 | RNVC: 2
370090-13: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-630-7725
Flexible Metal Conduit Assembly

006307725
370090-8: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-630-7077
Mult Electrical Cap

006307077
51931: RNCC: 3 | RNVC: 2
51931: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-630-3026
Conduit Outlet Cover

006303026
3770: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-629-8310
Electrical Equipment Mounting Base

006298310
58F12502: RNCC: 3 | RNVC: 2
MT274DARN6: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-629-7971
Electrical Strap

006297971
117B860G01: RNCC: 3 | RNVC: 2
117B860G01: RNCC: 3 | RNVC: 9

15 Mar 1975

5975-00-629-7782
Electrical Components Tie Down Strap

006297782
312829: RNCC: 3 | RNVC: 2
312829: RNCC: 5 | RNVC: 9
312829: RNCC: 5 | RNVC: 9

15 Mar 1975

5975-00-629-7780
Electrical Box Connector

006297780
7000-421-4G: RNCC: 3 | RNVC: 2

15 Mar 1975

5975-00-629-7502
Junction Box

006297502
3G-1/2&3/4: RNCC: 3 | RNVC: 2
3G1-2: RNCC: 5 | RNVC: 9

15 Mar 1975

5975-00-629-4990
Electrical Cable Nipple

006294990
A9AZ12113H: RNCC: 3 | RNVC: 9
18-12113: RNCC: 5 | RNVC: 9
2N12113: RNCC: 5 | RNVC: 9
A9AZ12113A: RNCC: 5 | RNVC: 9
A9AZ12113H: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-629-2768
Electrical Equipment Rack

006292768
3234012-110: RNCC: 3 | RNVC: 2

15 Mar 1975

5975-00-629-2736
Electrical Equipment Rack

006292736
3234013-110: RNCC: 3 | RNVC: 2
3234013-110: RNCC: 5 | RNVC: 1

15 Mar 1975

5975-00-629-2674
Electrical Equipment Rack

006292674
3234011-110: RNCC: 3 | RNVC: 2

15 Mar 1975

5975-00-628-9532
Electrical Conduit Nipple

006289532
167-0061: RNCC: 3 | RNVC: 2
167A61: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-628-6397
Electrical Equipment Rack Base

006286397
562-6945-004: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-628-5283
Fanning Strip

006285283
66-1755-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-627-1561
Electrical Equipment Mounting Base

006271561
90078: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-627-1093
Flexible Nonmetallic Conduit

006271093
LCP-350: RNCC: 3 | RNVC: 2
CVC2597-12-100: RNCC: 5 | RNVC: 9

9 Mar 1975

5975-00-626-9982
Cable Clamp

006269982
9126649: RNCC: 3 | RNVC: 2
9126649: RNCC: 5 | RNVC: 2
PC101393-7: RNCC: 5 | RNVC: 2
KL1344: RNCC: 5 | RNVC: 2
9126649: RNCC: 5 | RNVC: 9
2C1-50M9: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-625-6347
Electrical Equipment Mounting Base

006256347
522-8626-004: RNCC: 3 | RNVC: 9
MT189ARM29: RNCC: 5 | RNVC: 2
MT1897ARM29: RNCC: 5 | RNVC: 2

16 Oct 1971

5975-00-624-1919
Junction Box Cover

006241919
3GCB: RNCC: 3 | RNVC: 2

3 Mar 1975

5975-00-624-0078
Electrical-Electronic Equipment Panel

006240078
153647: RNCC: 3 | RNVC: 9
153647: RNCC: 5 | RNVC: 9
153647: RNCC: 5 | RNVC: 9
153647: RNCC: 5 | RNVC: 9
153647: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-624-0045
Blank Panel

006240045
157865: RNCC: 3 | RNVC: 2
157865: RNCC: 5 | RNVC: 9
157865: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-623-0291
Flexible Metal Conduit Assembly

006230291
HT1907AA: RNCC: 3 | RNVC: 2
S2206-1907: RNCC: 5 | RNVC: 2
E1199-484-1907: RNCC: 5 | RNVC: 9
HT1907AA: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-623-0288
Flexible Metal Conduit Assembly

006230288
S202-1203: RNCC: 3 | RNVC: 2
S2206-1203: RNCC: 5 | RNVC: 2
HT1212AA: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-622-9968
Strain Electrical Conductor Clamp

006229968
10-74936-10: RNCC: 3 | RNVC: 2
9033962: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-622-2180
Junction Box

006222180
2642D: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-622-2178
Tee

006222178
2115: RNCC: 3 | RNVC: 2
10607829-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-622-1958
Electrical Conductor Bushing

006221958
8902738-104: RNCC: 3 | RNVC: 2
58-33-2-56: RNCC: 5 | RNVC: 2
721599-34: RNCC: 5 | RNVC: 2
8902738-104: RNCC: 5 | RNVC: 9
7208870-15: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-621-9604
Ground Rod Assembly

006219604
9060404: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-621-4904
Rigid Metal Conduit Assembly

006214904
4015100-14: RNCC: 3 | RNVC: 2
4015100-14: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-621-0152
Bushing

006210152
34-540: RNCC: 3 | RNVC: 2
57-4037: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-618-0161
Junction Box

006180161
739443-01: RNCC: 3 | RNVC: 2

31 Oct 1969

5975-00-617-9509
Electrical Components Tie Down Strap

006179509
SS70340008: RNCC: 3 | RNVC: 2
SS7034D008: RNCC: C | RNVC: 1

20 Oct 1969

5975-00-617-9413
Flexible Metal Conduit Assembly

006179413
EXGJH112: RNCC: 3 | RNVC: 2
ECGJH-50-12: RNCC: 5 | RNVC: 9

31 Oct 1969

5975-00-617-8464
Flexible Metal Conduit Assembly

006178464
AF73001-101: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-617-7138
Cable Strain Relief Bushing

006177138
SR11-2: RNCC: 3 | RNVC: 2
SM-B-342530: RNCC: 5 | RNVC: 2
20886: RNCC: 5 | RNVC: 9
SR11: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-617-3458
Electrical Cable Nipple

006173458
RG1: RNCC: 3 | RNVC: 2
301-66: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-617-1171
Ground Clamp

006171171
18D589: RNCC: 3 | RNVC: 2

15 Feb 1975

5975-00-615-9660
Chassis Base

006159660
B2-916: RNCC: 3 | RNVC: 2
48B13263: RNCC: 5 | RNVC: 2
48B13263: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-615-9302
Electrical Conduit Elbow

006159302
857B137P1: RNCC: 3 | RNVC: 2
10-40695-141: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-615-8678
Electrical Box Connector

006158678
DBZM-6828: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-615-6934
Electrical Box Connector

006156934
DB26238: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-615-6758
Electrical Conduit Sealing Fitting

006156758
EYS5: RNCC: 3 | RNVC: 2
EYSF-150: RNCC: 3 | RNVC: 2
EY-150: RNCC: 5 | RNVC: 9
EYS5: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-615-2582
Cable Retainer

006152582
150-019984-001: RNCC: 3 | RNVC: 2

12 Feb 1975

5975-00-615-1380
Electrical Wall Plate

006151380
342C308H02: RNCC: 3 | RNVC: 2
342C308H02: RNCC: 5 | RNVC: 2
3046B: RNCC: 5 | RNVC: 9
7550826-2: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-614-9460
Electrical Conductor Bushing

006149460
573006: RNCC: 3 | RNVC: 2
DTFX3PT573006: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-613-7610
Electrical Equipment Leg Section

006137610
6137610: RNCC: 3 | RNVC: 2
6137610: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-613-1758
Electrical Equipment Cabinet

006131758
119142: RNCC: 3 | RNVC: 2
540-8826-003: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-612-7048
Electrical Equipment Mounting Base

006127048
MT1477ARC52: RNCC: 3 | RNVC: 2
117813: RNCC: 5 | RNVC: 2
522-0308-005: RNCC: 5 | RNVC: 2
117813500: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-612-1995
Ground Clamp

006121995
GF-19G: RNCC: 3 | RNVC: 9
SP020: RNCC: 5 | RNVC: 1
3841: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-611-8567
Junction Box

006118567
8B745004-11: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-611-1373
Junction Box

006111373
69091-301-11: RNCC: 3 | RNVC: 2

30 Jan 1975

5975-00-611-0421
Electrical Conductor Bushing

006110421
7009759P001: RNCC: 3 | RNVC: 2
7009759P1: RNCC: 5 | RNVC: 2
7009759: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-610-5842
Conduit Outlet Cover

006105842
580: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-610-5817
Conduit Outlet

006105817
FSC32: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
FSA-102: RNCC: 5 | RNVC: 9
FSC32: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-610-2454
Electrical Cable Nipple

006102454
331-104: RNCC: 3 | RNVC: 9
331GREEN: RNCC: 5 | RNVC: 9
331GREEN: RNCC: 5 | RNVC: 9
62GREEN: RNCC: C | RNVC: 1

5 Feb 1975

5975-00-610-0182
Electrical Equipment Mounting Base

006100182
418128: RNCC: 3 | RNVC: 2
418094: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-609-3141
Chassis Base

006093141
101115: RNCC: 3 | RNVC: 2
G40P13185: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-609-2255
Electrical-Electronic Equipment Chassis

006092255
102509: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-608-6446
Sealnut

006086446
14029: RNCC: 3 | RNVC: 2
14029: RNCC: 5 | RNVC: 9
HA1268: RNCC: 5 | RNVC: 9
53577: RNCC: 5 | RNVC: 9
1589900053: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-607-6229
Junction Box Cover

006076229
3037-1938: RNCC: 3 | RNVC: 2

25 Jan 1975

5975-00-606-8603
Conduit Outlet Cover

006068603
RSP5: RNCC: 3 | RNVC: 2
RSP5: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-606-8604
Electrical Conduit Adapter

006068604
REC53: RNCC: 3 | RNVC: 2
REC53: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-606-6497
Interconnecting Box

006066497
5048-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-606-5460
Antenna Guy Fitting

006065460
12348: RNCC: 3 | RNVC: 2
ESH52477: RNCC: 5 | RNVC: 1
MX311AR: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-606-5309
Split Bushing

006065309
CRN1497-12-1: RNCC: 3 | RNVC: 2

30 Jan 1975

5975-00-605-7702
Weather Seal Boot And Clamp

006057702
815F1197037: RNCC: 3 | RNVC: 2
815-1197037REVB: RNCC: 5 | RNVC: 9
815F1197037: RNCC: 5 | RNVC: 9
NBD171-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-605-6460
Electrical-Electronic Equipment Chassis

006056460
AC-1405: RNCC: 3 | RNVC: 2

25 Jan 1975

5975-00-604-8537
Electrical-Electronic Equipment Chassis

006048537
101016-022: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-604-8274
Electrical-Electronic Equipment Chassis

006048274
101016-011: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-604-7781
Electrical-Electronic Equipment Chassis

006047781
101016-02: RNCC: 3 | RNVC: 9
5800332-1710-000: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-604-0129
Electrical Conduit Elbow

006040129
38980: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-603-5212
Electrical Equipment Mounting Base

006035212
404-75S0-2: RNCC: 3 | RNVC: 2

18 Jan 1975

5975-00-602-3923
Electrical Conduit Wye

006023923
10-38973Y: RNCC: 3 | RNVC: 2
10-38973Y: RNCC: 5 | RNVC: 9
10-38973: RNCC: 5 | RNVC: 9
10-38973: RNCC: 5 | RNVC: 9
10-38973Y: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-601-3051
Flexible Metal Conduit Assembly

006013051
358058-4: RNCC: 3 | RNVC: 2
C198-0750-1604G3G4: RNCC: 5 | RNVC: 2
C198-0750-1604G3G4: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-601-3034
Preformed Guy Grip

006013034
BG2146: RNCC: 3 | RNVC: 2
30GDE5-16: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-600-5231
Preformed Guy Grip

006005231
BG2148: RNCC: 3 | RNVC: 2
38GDE7-16: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-600-5230
Preformed Guy Grip

006005230
BG2147: RNCC: 3 | RNVC: 2
GDE1107: RNCC: 5 | RNVC: 1
P-7380GE: RNCC: 5 | RNVC: 2
3-8GSBG: RNCC: 5 | RNVC: 9
X3/8GSBG-C: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-600-1321
Electrical Equipment Mounting Base

006001321
2710-1: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-599-1701
Electrical-Electronic Equipment Chassis

005991701
623-5861-001: RNCC: 3 | RNVC: 2

16 Jan 1975

5975-00-596-4716
Duct Wire Retainer

005964716
LD6WR: RNCC: 3 | RNVC: 2
LD6WR: RNCC: 5 | RNVC: 9

11 Jan 1975

5975-00-593-9767
Blank Panel

005939767
LS4174A8: RNCC: 3 | RNVC: 2
LS4174-8: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-593-7839
Electrical-Electronic Equipment Chassis

005937839
A25A506-201-115: RNCC: 3 | RNVC: 2
A25A506-201-115: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-593-6797
Electrical-Electronic Equipment Chassis

005936797
A25A506-130-109: RNCC: 3 | RNVC: 2
A25A506-130-109: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-593-3485
Junction Box Cover

005933485
356897-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-593-3486
Junction Box Cover

005933486
356897-3: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-592-8675
Mount

005928675
52960: RNCC: 3 | RNVC: 2
42947: RNCC: 5 | RNVC: 2
52960: RNCC: 5 | RNVC: 9
52960: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-592-3925
Bracket Assembly

005923925
1718K19G700: RNCC: 3 | RNVC: 2

28 Dec 1974

5975-00-591-7100
Interconnecting Box

005917100
52327: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-591-5289
Flexible Metal Conduit Assembly

005915289
8B744165-11: RNCC: 3 | RNVC: 2

20 Jan 1966

5975-00-591-4771
Blank Panel

005914771
138034: RNCC: 3 | RNVC: 2
138034: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-590-5928
Cable Thimble Assem

005905928
393691PC95: RNCC: 3 | RNVC: 2

30 Jul 1974

5975-00-590-3624
Electrical-Electronic Equipment Chassis

005903624
540-7357-005: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-589-4263
Flexible Metal Conduit Assembly

005894263
B744165-41: RNCC: 3 | RNVC: 9
8B744165-41: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-589-2252
Conduit Breatherdrain

005892252
ECD15: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-589-0183
Electrical Conduit Ferrule

005890183
AN3050-3: RNCC: 2 | RNVC: 2
212496: RNCC: 5 | RNVC: 9
11-0187: RNCC: C | RNVC: 1
258-3090: RNCC: C | RNVC: 1
6026-1083-4: RNCC: C | RNVC: 1
39B3335-1: RNCC: C | RNVC: 1
47A30: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-589-0171
Conduit Outlet Cover

005890171
S212: RNCC: 3 | RNVC: 2
S212: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-588-6658
Blank Panel

005886658
158251: RNCC: 3 | RNVC: 2
158251: RNCC: 5 | RNVC: 9
158251: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-587-9604
Lay-In Duct Elbow

005879604
LD290LGRYGRN: RNCC: 3 | RNVC: 2
272-1461P2: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-587-8861
Chassis Base

005878861
100058: RNCC: 3 | RNVC: 2
G11P12904: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-587-8860
Chassis Base

005878860
100057: RNCC: 3 | RNVC: 2
G11P12902: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-587-8859
Chassis Base

005878859
100056: RNCC: 3 | RNVC: 2
G11P12906: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-586-6031
Electrical Equipment Mounting Base

005866031
114479-01: RNCC: 3 | RNVC: 2
23986-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-583-8623
Electrical Conductor Bushing

005838623
5M13-24: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-583-8552
Cable Strain Relief Bushing

005838552
SR14-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-583-2707
Conduit Outlet

005832707
T317: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
T317: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-583-2526
Strain Electrical Conductor Clamp

005832526
DB990A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-583-2425
Electrical Conductor Bushing

005832425
BB150: RNCC: 3 | RNVC: 9
MBV-150: RNCC: 5 | RNVC: 9
IB44: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-581-8326
Electrical Conduit Elbow

005818326
9954895: RNCC: 3 | RNVC: 2
MF90-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-581-7098
Electrical Box Connector

005817098
9-2-E6: RNCC: 3 | RNVC: 2
9-2-E6: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-581-6728
Conduit Outlet Cover

005816728
870: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-581-4165
Electrical Conduit Elbow

005814165
EL49: RNCC: 3 | RNVC: 2
ELF90-125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-581-4164
Electrical Conduit Elbow

005814164
EL39: RNCC: 3 | RNVC: 2
ELF90-100: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-581-4112
Electrical Conduit Elbow

1 Jan 1963

5975-00-581-0169
Electrical Conduit Ferrule

005810169
MS25065-4: RNCC: 2 | RNVC: 2
1276-4: RNCC: 5 | RNVC: 1
1276-4: RNCC: 5 | RNVC: 1
1276-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-580-0434
Electrical Conductor Bushing

005800434
B625-500: RNCC: 3 | RNVC: 2
077-003712-022: RNCC: 8 | RNVC: 2

19 Dec 1974

5975-00-580-0249
Electrical Entrance Cap

005800249
F966: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

22 Oct 1969

5975-00-578-3352
Flexible Metal Conduit Assembly

005783352
358058-7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-578-3132
Blank Panel

005783132
421989: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-578-2573
Conduit Outlet

005782573
3010A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-578-2233
Conduit Outlet

005782233
X37: RNCC: 3 | RNVC: 1
X100-M: RNCC: 3 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
X-100G: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-578-2230
Conduit Outlet

005782230
AA50563-101AXXXB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
X27: RNCC: 5 | RNVC: 1
X75-M: RNCC: 5 | RNVC: 1
70-77: RNCC: 5 | RNVC: 9
X-75G: RNCC: 5 | RNVC: 9
X27: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-578-2099
Junction Box

005782099
372034: RNCC: 3 | RNVC: 2
372034: RNCC: 5 | RNVC: 9
372034: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-578-2017
Junction Box

005782017
347396: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-577-0168
Blank Panel

005770168
504-8802-002: RNCC: 3 | RNVC: 9
504-8802-002: RNCC: 5 | RNVC: 9
504-8802-002: RNCC: 5 | RNVC: 9
FNA1032: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-575-6665
Electrical Equipment Mounting Base

005756665
123SCAV5211-1: RNCC: 1 | RNVC: 2
7951649-001: RNCC: 3 | RNVC: 2
MT4383AS: RNCC: 5 | RNVC: 1

5 Apr 1972

5975-00-574-5634
Cable Clamp

005745634
333963: RNCC: 3 | RNVC: 2
871663: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-574-3579
Electrical Equipment Mounting Base

005743579
103335: RNCC: 3 | RNVC: 2

8 Dec 1974

5975-00-574-0855
Junction Box

005740855
T101126: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-573-8856
Junction Box

005738856
68954PC90: RNCC: 3 | RNVC: 2
68954: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-573-3510
Preformed Guy Grip

005733510
BG2115: RNCC: 3 | RNVC: 2
40GDE1-2: RNCC: 5 | RNVC: 2
2350-6202-001: RNCC: 5 | RNVC: 2
2350-6202: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-573-1993
Heat Sink Mounting Clamp

005731993
130-1B: RNCC: 3 | RNVC: 9
211-052-9002: RNCC: 5 | RNVC: 9

4 Dec 1974

5975-00-573-1995
Heat Sink Mounting Clamp

005731995
130-1D: RNCC: 3 | RNVC: 9
211-052-9004: RNCC: 5 | RNVC: 2

4 Dec 1974

5975-00-571-8467
Junction Box Cover

005718467
100: RNCC: 3 | RNVC: 2
150: RNCC: 5 | RNVC: 9

1 Dec 1974

5975-00-570-3928
Protector

005703928
13214E8718: RNCC: 1 | RNVC: 2
S556: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-569-3538
Interconnecting Box

005693538
P727706-501SUB4: RNCC: 3 | RNVC: 2
P727706-501SUB4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-568-7319
Circuit Card Assembly Rack

005687319
3311: RNCC: 3 | RNVC: 2
3311: RNCC: 5 | RNVC: 9

28 Nov 1974

5975-00-568-3660
Nonmetalic Raceway Conduit

005683660
10C1-2-7: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-567-2766
Blank Panel

005672766
6603: RNCC: 3 | RNVC: 2
101200-7: RNCC: 5 | RNVC: 2
PS 1253: RNCC: 5 | RNVC: 2
RI-013-043X: RNCC: 5 | RNVC: 9
PS-1253-BW: RNCC: 5 | RNVC: 9
9001-704D: RNCC: 5 | RNVC: 9
PS-1253-BW: RNCC: 5 | RNVC: 9
PS1253MG OR WH: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-567-2079
Flexible Metal Conduit Assembly

005672079
XH-3446: RNCC: 3 | RNVC: 2
626727-27-50: RNCC: 5 | RNVC: 9
626727-2750: RNCC: 5 | RNVC: 9
6267272750: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-567-2090
Rigid Metal Conduit

005672090
XH-6557: RNCC: 3 | RNVC: 2
626727-20-50: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-567-1387
Moulded Junction Assembly

005671387
EL16-003-101-04: RNCC: 3 | RNVC: 2
EL16-003-101-04: RNCC: 5 | RNVC: 9

17 Jan 1968

5975-00-567-1397
Moulded Junction Assembly

005671397
EL16-003-101-03: RNCC: 3 | RNVC: 2
EL16-003-101-03: RNCC: 5 | RNVC: 9

17 Jan 1968

5975-00-567-1303
Blank Insert

005671303
1445: RNCC: 3 | RNVC: 9

31 Mar 1972

5975-00-566-3866
Blank Panel

005663866
SM-D-283383A: RNCC: 3 | RNVC: 2
SM-D-283383A: RNCC: 5 | RNVC: 2
SM-D-283383A: RNCC: 5 | RNVC: 2
SM-D-283383A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-565-5606
External Corner Coupling

005655606
2118A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-565-3252
Electrical Equipment Mounting Base

005653252
3196550: RNCC: 3 | RNVC: 2
MT4690AQS13B: RNCC: 5 | RNVC: 1
3196550: RNCC: 5 | RNVC: 9

21 Nov 1974

5975-00-565-0377
Electrical Equipment Cabinet

005650377
83297: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-564-3588
Flexible Metal Conduit Assembly

005643588
5700F: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-564-0476
Stuffing Tube

005640476
581R489H01: RNCC: 3 | RNVC: 2

19 Nov 1974

5975-00-563-7576
Stuffing Tube

005637576
DBZP512S169: RNCC: 3 | RNVC: 2

19 Nov 1974

5975-00-563-7552
Electrical Wall Plate

005637552
9302G: RNCC: 3 | RNVC: 2

19 Nov 1974

5975-00-563-5851
Electr Contact Assy

005635851
1223991: RNCC: 3 | RNVC: 2
1223991: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-563-5421
Electrical Equipment Shelf

005635421
518-8911-814: RNCC: 3 | RNVC: 9

17 Oct 1969

5975-00-563-3605
Rigid Metal Conduit

005633605
D10914: RNCC: 3 | RNVC: 2
2-00002-612: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-563-3607
Rigid Metal Conduit

005633607
2-00002-611: RNCC: 3 | RNVC: 2
2-00002-611: RNCC: 5 | RNVC: 2

3 Jul 1978

5975-00-563-1491
Electrical Equipment Mounting Base

005631491
MT-198/ART-13A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-563-1483
Electrical Equipment Mounting Base

005631483
MT163ART13: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-563-0346
Electrical Equipment Mounting Base

005630346
MT447AAPS31: RNCC: 3 | RNVC: 2
26553: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-561-8238
Fanning Strip

005618238
9001077: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-561-0968
Electrical Equipment Leg

005610968
10973: RNCC: 3 | RNVC: 9
CG292N: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-561-0532
Conduit

005610532
16307: RNCC: 3 | RNVC: 2
874C760P1: RNCC: 3 | RNVC: 2
16307: RNCC: 5 | RNVC: 1
874C760P1: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-560-7615
Blank Panel

005607615
142911: RNCC: 3 | RNVC: 2
142911: RNCC: 5 | RNVC: 9
5975PL0938726: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-560-7528
Electrical-Electronic Equipment Chassis

005607528
143002: RNCC: 3 | RNVC: 2
143002: RNCC: 3 | RNVC: 9
143002: RNCC: 5 | RNVC: 2
143002: RNCC: 5 | RNVC: 9
143002: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-560-5963
Electrical-Electronic Equipment Chassis

005605963
540-6753-003: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-560-5857
Electrical-Electronic Equipment Chassis

005605857
505-0332-005: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-560-1008
Insulating Cover

005601008
52083: RNCC: 3 | RNVC: 2
267-2471: RNCC: 5 | RNVC: 9
267-2Y71: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-557-4829
Conduit Outlet Cover

005574829
3010B: RNCC: 3 | RNVC: 1
V3010B: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-557-2540
Junction Box Cover

005572540
ZT48-84BCOT: RNCC: 3 | RNVC: 2
MT20341-051-010: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-556-2146
Blank Panel

005562146
602330: RNCC: 3 | RNVC: 2
602330: RNCC: D | RNVC: 9

1 Jan 1961

5975-00-556-1259
Metallic Raceway

005561259
20G306: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-556-0843
Electrical Conduit Adapter

005560843
AN3104-1: RNCC: 2 | RNVC: 1
187606-FB0000: RNCC: 5 | RNVC: 1
E1124-85-10P: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-553-6831
Electrical Equipment Rack

005536831
464774-150: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-553-5531
Electrical Conductor Bushing

005535531
10066: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-552-9080
Electrical Equipment Mounting Base

005529080
MT803APN22: RNCC: 3 | RNVC: 1
01-90303-1: RNCC: 5 | RNVC: 2
MT803APN22SLEB: RNCC: 5 | RNVC: 2
01-90303-1: RNCC: 5 | RNVC: 9
01-90303-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-552-1764
Electrical Conductor Bushing

005521764
140403-169: RNCC: 3 | RNVC: 2
1047560: RNCC: 3 | RNVC: 2
1760B: RNCC: 5 | RNVC: 2
LD289897: RNCC: 5 | RNVC: 2
7102063: RNCC: 5 | RNVC: 2
1760B: RNCC: 5 | RNVC: 9
140403-169: RNCC: 5 | RNVC: 9
14B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-551-3152
Retaining Plate

005513152
094-68799: RNCC: 3 | RNVC: 2
094-68799: RNCC: 5 | RNVC: 9

22 Oct 1974

5975-00-549-9316
Electrical-Electronic Equipment Chassis

005499316
CB771: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-549-9093
Electrical-Electronic Equipment Chassis

005499093
AC433: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-549-1718
Electrical Grounding Plate

005491718
FRA3079-1-2: RNCC: 3 | RNVC: 9
FRA3079-1-2: RNCC: 5 | RNVC: 2
FRA3079-1-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-549-0090
Electrical Cable Protector

005490090
256528: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-548-9722
Interior Cable Rack

005489722
H44225-1: RNCC: 3 | RNVC: 9
28090PH55-51: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-9560
Conduit Chase Nipple

005489560
AN3064-32: RNCC: 2 | RNVC: 2
900-90-32: RNCC: 5 | RNVC: 1
A18331C32: RNCC: 5 | RNVC: 1
28-12-32: RNCC: 5 | RNVC: 1
GF803P32: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-8755
Conduit Outlet

005488755
TB57: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
TB57: RNCC: 5 | RNVC: 9
TB-150G: RNCC: 5 | RNVC: 9
TB-150G: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-8751
Electrical Conduit Nipple

005488751
UL 514 CLS 1, AIZE 1.5, TYPE D: RNCC: 3 | RNVC: 2
ANSI UL514B: RNCC: 4 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-5888
Conduit Chase Nipple

005485888
851: RNCC: 3 | RNVC: 2
CN-400: RNCC: 5 | RNVC: 1
1616: RNCC: 5 | RNVC: 1
HA-410: RNCC: 5 | RNVC: 1
1111: RNCC: 5 | RNVC: 9
7-400: RNCC: 5 | RNVC: 9
851: RNCC: 5 | RNVC: 9
HA-410: RNCC: 5 | RNVC: 9
59: RNCC: 5 | RNVC: 9
960: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-5269
Electrical Conduit Adapter

005485269
10-35875-281: RNCC: 3 | RNVC: 2
10-35875-281: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-5076
Flexible Metal Conduit

005485076
198-0375: RNCC: 3 | RNVC: 2
198-0375: RNCC: 5 | RNVC: 2
C198-0375: RNCC: 5 | RNVC: 2
C198-0375: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-3921
Duct Connector

005483921
LD88C: RNCC: 3 | RNVC: 2
LD88C: RNCC: 5 | RNVC: 9

15 Oct 1974

5975-00-548-2544
Electronic Junction Rack

005482544
M81714/16-11: RNCC: 2 | RNVC: 2
1-591621-3: RNCC: 5 | RNVC: 1
TJT703013: RNCC: 5 | RNVC: 2
MRTBL13: RNCC: 5 | RNVC: 9

12 Jun 1982

5975-00-547-7438
Electrical Equipment Mounting Base

005477438
185331-001: RNCC: 3 | RNVC: 9

12 Oct 1974

5975-00-547-2958
Adapter

005472958
012-32-000-11: RNCC: 3 | RNVC: 2
GA800GV64: RNCC: 5 | RNVC: 2

9 Oct 1974

5975-00-546-9469
Junction Box

005469469
417-6201-69073ALT18: RNCC: 3 | RNVC: 2
417-6201-69075ALT3: RNCC: 3 | RNVC: 2
5941-417ALT3: RNCC: 3 | RNVC: 2
417-6201-69074ALT5: RNCC: 3 | RNVC: 2
5939-417ALT18: RNCC: 3 | RNVC: 2
5940-417ALT5: RNCC: 3 | RNVC: 2
5939-417PCALL: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-546-5455
Electr Cap Entrance

005465455
F186: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-545-3371
Duct Closing Plate

005453371
LD88E: RNCC: 3 | RNVC: 2
LD88E: RNCC: 5 | RNVC: 9

9 Oct 1974

5975-00-545-0506
Ignition Cab Marker

005450506
AN4028-8: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-544-4214
Electrical-Electronic Equipment Chassis

005444214
738114-4: RNCC: 3 | RNVC: 2
8821022-3: RNCC: 5 | RNVC: 9
8821022-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-544-2739
Rear Panel

005442739
505-1929-003: RNCC: 3 | RNVC: 2
505-1929-003: RNCC: 5 | RNVC: 1
505-1929-003: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-544-0796
Clamp

005440796
S200F1-413D: RNCC: 3 | RNVC: 2
S200F1-413D: RNCC: 3 | RNVC: 9
71-81167-2: RNCC: 5 | RNVC: 2
200F1-413D: RNCC: 5 | RNVC: 9
71-81167-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-543-1194
Flexible Metal Conduit Assembly

005431194
SM-B-185276: RNCC: 3 | RNVC: 2
57646: RNCC: 5 | RNVC: 9
57646A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-541-8531
Junction Box

005418531
516317-1: RNCC: 3 | RNVC: 2

2 Oct 1974

5975-00-541-8024
Flexible Metal Conduit

005418024
8525195: RNCC: 3 | RNVC: 2
7-8525195: RNCC: 5 | RNVC: 2
7-8525195: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-539-6365
Conduit Outlet Cover

005396365
DSS100: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-538-5039
Electrical Equipment Cabinet

005385039
SM-D-360701: RNCC: 3 | RNVC: 2
CY1966U: RNCC: 5 | RNVC: 2
D1426: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-538-4758
Electrical Conduit Adapter

005384758
81044: RNCC: 3 | RNVC: 2
E1124-84-10P: RNCC: 5 | RNVC: 2
E1124-84-10P: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-538-3987
Bracket

005383987
1883157: RNCC: 3 | RNVC: 2

22 Sep 1974

5975-00-538-3968
Electrical Conduit Elbow

005383968
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-538-3133
Electrical Box Connector

005383133
8621: RNCC: 3 | RNVC: 2
NTC-200: RNCC: 5 | RNVC: 2
1808: RNCC: 5 | RNVC: 2
HC-406: RNCC: 5 | RNVC: 2
31-200: RNCC: 5 | RNVC: 9
1755: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-538-2947
Electrical Equipment Mounting Base

005382947
MT803APN22: RNCC: 3 | RNVC: 1
MT803APN22: RNCC: 5 | RNVC: 2
1792-5001: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-538-0947
Electrical Box Connector

005380947
325940: RNCC: 3 | RNVC: 2
325940: RNCC: 5 | RNVC: 9

22 Sep 1974

5975-00-538-0964
Flexible Metal Conduit

005380964
4008010-2: RNCC: 3 | RNVC: 2
4008010-2: RNCC: 3 | RNVC: 9

22 Sep 1974

5975-00-538-0670
Electrical Equipment Cabinet

005380670
CY1860FPS20: RNCC: 3 | RNVC: 2
R650456-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-538-0249
Electrical Equipment Rack

005380249
ED90370-73GR4: RNCC: 3 | RNVC: 2
ED90370-73GR4: RNCC: 3 | RNVC: 9
24-6107: RNCC: 5 | RNVC: 9
ED90370-73GR4: RNCC: 5 | RNVC: 9
ED90370-73GRP4: RNCC: 5 | RNVC: 9
ED90370-73GRP4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-538-0235
Electrical Equipment Drawer

005380235
R650439-1: RNCC: 3 | RNVC: 2
SB-424/FPS-20: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-538-0076
Junction Box

005380076
A84265: RNCC: 3 | RNVC: 2
A84265: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-536-3953
Raceway Connector

005363953
5782A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-536-3954
Raceway Connector

005363954
5783: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-535-8547
Electrical Equipment Mounting Base

005358547
522-0325-002: RNCC: 3 | RNVC: 1
MT1223AR: RNCC: 3 | RNVC: 2
522-0325-002: RNCC: 3 | RNVC: 2
522-0325-002: RNCC: 5 | RNVC: 9
350D3: RNCC: 5 | RNVC: 9
350D3: RNCC: 5 | RNVC: 9
522-0325-002: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-535-7450
Rigid Conduit Assy

005357450
8512367: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-535-3939
Junction Box

005353939
933D686GP1: RNCC: 3 | RNVC: 1

17 Sep 1974

5975-00-534-8756
Metal Wedge

005348756
6783SIZE2: RNCC: 3 | RNVC: 2
AT6783SIZE2: RNCC: 5 | RNVC: 2
AT6783SIZE2: RNCC: 5 | RNVC: 9
AT6783S1ZE2: RNCC: 5 | RNVC: 9
AT6783SIZE2: RNCC: 5 | RNVC: 9
AT6783SIZE2: RNCC: 5 | RNVC: 9
AT6783S1ZE2: RNCC: 5 | RNVC: 9
AT6783SIZE2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-532-8494
Electrical-Electronic Equipment Chassis

005328494
738114-2: RNCC: 3 | RNVC: 2
8821022-1: RNCC: 5 | RNVC: 9
8821022-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-531-9746
Test Harness Disk

005319746
548-0626-002: RNCC: 3 | RNVC: 2

13 Jun 1969

5975-00-531-3954
Electrical Equipment Leg Section

005313954
5313954: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-531-3953
Electrical Equipment Leg Section

005313953
5313953: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-529-3835
Electrical Conduit Adapter

005293835
RE65SA: RNCC: 3 | RNVC: 2
RE65SA: RNCC: 5 | RNVC: 9

1 Sep 1974

5975-00-528-9768
Electrical Conduit Adapter

005289768
S694-4-24-62R: RNCC: 3 | RNVC: 2
533405-321: RNCC: 5 | RNVC: 9

1 Sep 1974

5975-00-528-9767
Electrical Conduit Adapter

005289767
533405-302: RNCC: 3 | RNVC: 2
S694-4-20-50R: RNCC: 5 | RNVC: 9

1 Sep 1974

5975-00-528-9774
Electrical Conduit Adapter

005289774
S694-428-5OR: RNCC: 3 | RNVC: 2
533405-320: RNCC: 5 | RNVC: 2

1 Sep 1974

5975-00-527-9650
Electrical Conduit Nipple

005279650
H0-223: RNCC: 3 | RNVC: 2
1522-DC: RNCC: 5 | RNVC: 9

28 Aug 1974

5975-00-525-8861
Junction Box

005258861
3000F: RNCC: 3 | RNVC: 2

28 Aug 1974

5975-00-525-5418
Wire Strand Hanger Support Strap

005255418
H333: RNCC: 3 | RNVC: 2

25 Aug 1974

5975-00-523-6910
Blank Panel

005236910
243048-000: RNCC: 3 | RNVC: 2

23 Aug 1974

5975-00-523-6447
Hub Plate

005236447
RSMP4: RNCC: 3 | RNVC: 2
RSMP4: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-523-1992
Interior Cable Rack

005231992
444607-000: RNCC: 3 | RNVC: 2
444607-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-5128
Electrical Equipment Mounting Base

005225128
BL1931-1-1: RNCC: 3 | RNVC: 2
136055-01: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-522-4548
Electrical Equipment Mounting Base

005224548
719: RNCC: 3 | RNVC: 2
210-7003: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-522-2709
Stuffing Tube

005222709
1088321: RNCC: 3 | RNVC: 2
2467472: RNCC: C | RNVC: 1

23 Aug 1974

5975-00-522-2711
Cable Strain Relief Bushing

005222711
SR2M4: RNCC: 3 | RNVC: 2
C5111249-001: RNCC: 7 | RNVC: 9

23 Aug 1974

5975-00-522-2353
Strain Electrical Conductor Clamp

005222353
80500: RNCC: 3 | RNVC: 9
80500: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-521-8848
Junction Box

005218848
94: RNCC: 3 | RNVC: 2

19 Aug 1974

5975-00-520-2906
Fanning Strip

005202906
39-23292-1: RNCC: 3 | RNVC: 2

18 Jun 1969

5975-00-519-9859
Electrical-Electronic Equipment Chassis

005199859
360236-501: RNCC: 3 | RNVC: 9
360236-501: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-519-3837
Junction Box Cover

005193837
97122: RNCC: 3 | RNVC: 2
97122: RNCC: 5 | RNVC: 9

13 Aug 1974

5975-00-519-3946
Flexible Metal Conduit

005193946
198-1250: RNCC: 3 | RNVC: 2
198-1250: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-518-4977
Electrical Equipment Cabinet

005184977
R650304-1: RNCC: 3 | RNVC: 2
CY1814GPS: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-518-4552
Ground Rod

005184552
6253S: RNCC: 3 | RNVC: 2
MIL-R-11461: RNCC: 4 | RNVC: 1
17-02031-01: RNCC: 5 | RNVC: 9
C54: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-518-4450
Electrical Conduit Adapter

005184450
2174: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-4425
Electrical Cable Nipple

005184425
22E2164-1: RNCC: 3 | RNVC: 2
22E2164-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-518-3275
Junction Box

005183275
5735: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-3194
Electrical Wall Plate

005183194
91031: RNCC: 3 | RNVC: 2
91031: RNCC: 5 | RNVC: 2
953B: RNCC: 5 | RNVC: 2
19-1BR: RNCC: 5 | RNVC: 2
91031: RNCC: 5 | RNVC: 9
98031: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-518-2129
Junction Box

005182129
5719D: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-1896
Electric Strandvise

005181896
5150: RNCC: 3 | RNVC: 9

11 Aug 1974

5975-00-518-1865
Blank Panel

005181865
408560: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-1815
Electrical Wall Plate

005181815
91102: RNCC: 3 | RNVC: 1
RC7191: RNCC: 3 | RNVC: 1
91102: RNCC: 3 | RNVC: 1
UL 514C: RNCC: 3 | RNVC: 1
91102: RNCC: 3 | RNVC: 1
ANSI UL514C: RNCC: 3 | RNVC: 1
RC7191: RNCC: 5 | RNVC: 9
91102: RNCC: 5 | RNVC: 9
WC596STYLEW4: RNCC: 5 | RNVC: 9
91102: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-518-1675
Blank Panel

005181675
403459: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-0372
Electrical Equipment Rack

005180372
2056100: RNCC: 3 | RNVC: 2
MT1541ARM20: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-518-0275
Underground Cable Rack

005180275
DU17B3: RNCC: 3 | RNVC: 9
2125: RNCC: 5 | RNVC: 9
618: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-518-0186
Junction Box

005180186
5744-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-517-8116
Electrical-Electronic Equipment Chassis

005178116
351500-1: RNCC: 3 | RNVC: 2

2 Jul 1971

5975-00-516-1768
Electrical Components Tie Down Strap

005161768
10S300-2-42: RNCC: 3 | RNVC: 9
10S300-2-42: RNCC: C | RNVC: 1

11 Aug 1974

5975-00-516-1771
Electrical Components Tie Down Strap

005161771
10S300-2-9: RNCC: 3 | RNVC: 9
10S300-2-9: RNCC: C | RNVC: 1

11 Aug 1974

5975-00-516-1766
Electrical Components Tie Down Strap

005161766
10S300-2-11: RNCC: 3 | RNVC: 9
10S300-2-11: RNCC: C | RNVC: 1

11 Aug 1974

5975-00-514-8614
Electrical Equipment Mounting Base

005148614
6878-005000: RNCC: 3 | RNVC: 2
A0HAA1BA4: RNCC: 3 | RNVC: 2
K684143-3: RNCC: 7 | RNVC: 2

25 Jun 1971

5975-00-514-1136
Rigid Metal Conduit

005141136
325941: RNCC: 3 | RNVC: 2
325941: RNCC: 3 | RNVC: 9
325941: RNCC: 5 | RNVC: 2
325941: RNCC: 5 | RNVC: 9

3 Aug 1974

5975-00-513-2417
Electrical Conduit Ferrule

005132417
S1110751-6: RNCC: 3 | RNVC: 2
11-2B6: RNCC: 5 | RNVC: 2
S1110751-6: RNCC: 5 | RNVC: 9
11-2B6: RNCC: 5 | RNVC: 9
019-1561-150: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-511-9023
Electrical Equipment Mounting Base

005119023
2066901G1: RNCC: 3 | RNVC: 2
MT1729ARN52: RNCC: 5 | RNVC: 1
2066901G2: RNCC: 5 | RNVC: 2
01X215003: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-511-7206
Indicator Box

005117206
9S5066-2: RNCC: 3 | RNVC: 2
SKB544: RNCC: 5 | RNVC: 2
S81-920: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-511-5741
Junction Box

005115741
47-760-090-3: RNCC: 3 | RNVC: 2
47-760-090-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-509-2457
Electrical Cable Splice Protector

005092457
S525970: RNCC: 3 | RNVC: 9
S6741: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-509-2462
Electrical Cable Splice Protector

005092462
S525958: RNCC: 3 | RNVC: 9
15051-0101: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-509-2435
Electrical Equipment Mounting Base

005092435
706057-801: RNCC: 3 | RNVC: 2

26 Jul 1974

5975-00-509-2451
Electrical Cable Splice Protector

005092451
S6872: RNCC: 3 | RNVC: 9
S525954: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-508-7169
Electrical Equipment Mounting Base

005087169
97226-01: RNCC: 3 | RNVC: 2
97226: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-508-3903
Metal Conduit Assy

005083903
3002-00904: RNCC: 3 | RNVC: 2
2206-904: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-507-8884
Insulator Pin

005078884
J3322: RNCC: 3 | RNVC: 2

26 Jul 1974

5975-00-507-8882
Crossarm Brace

005078882
J4760: RNCC: 3 | RNVC: 2

26 Jul 1974

5975-00-507-8861
Wedge Clamp

005078861
7196: RNCC: 3 | RNVC: 9

23 Jul 1974

5975-00-505-0304
Duct End Cap

005050304
TEC710: RNCC: 3 | RNVC: 2

20 Jul 1974

5975-00-504-9342
Electrical Conduit Coupling Nut

005049342
118-22B4: RNCC: 3 | RNVC: 2
118-22B4: RNCC: 5 | RNVC: 9
118-22B4: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-504-8990
Conduit Outlet Cover

005048990
S322: RNCC: 3 | RNVC: 2
TS-2: RNCC: 5 | RNVC: 2
TS-2: RNCC: 5 | RNVC: 9
TS-2: RNCC: 5 | RNVC: 9
S322: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-504-8613
Junction Box Cover

005048613
AA59214-8A-3: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
24C6: RNCC: 5 | RNVC: 1
WJ800: RNCC: 5 | RNVC: 9
8320: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-504-7646
Junction Box Cover

005047646
AA59214-8: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
8486: RNCC: 5 | RNVC: 1
72C18: RNCC: 5 | RNVC: 1
WJ800: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-504-7590
Electrical Conductor Bushing

005047590
6517618: RNCC: 3 | RNVC: 9
6517618: RNCC: 5 | RNVC: 2
6517617: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-504-7195
Electrical Conduit Adapter

005047195
440: RNCC: 3 | RNVC: 2
108-138: RNCC: 5 | RNVC: 9
149-285: RNCC: 5 | RNVC: 9
0001493: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-504-6625
Flexible Metal Conduit Assembly

005046625
S14-55-2283: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-503-4633
Flexible Metal Conduit

005034633
MIL-C-6136: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-503-4634
Flexible Metal Conduit

005034634
301853-1: RNCC: 3 | RNVC: 2
MILC6136: RNCC: 4 | RNVC: 1
TYPE1 3-16IN: RNCC: 4 | RNVC: 1
1150-3: RNCC: 5 | RNVC: 2
765-3: RNCC: 5 | RNVC: 2
8519368: RNCC: 5 | RNVC: 2
1-0187: RNCC: 5 | RNVC: 2
5L1202: RNCC: 5 | RNVC: 9
765-3: RNCC: 5 | RNVC: 9
1-0187: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-4636
Flexible Metal Conduit

005034636
MIL-C-6136: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-503-3622
Cutout And Arrester Mounting Bracket

005033622
DC47B1: RNCC: 3 | RNVC: 9

13 Jul 1974

5975-00-503-3607
Channel

005033607
P409186: RNCC: 3 | RNVC: 2
P409186: RNCC: 3 | RNVC: 9
P409186: RNCC: 5 | RNVC: 9

13 Jul 1974

5975-00-503-3452
Electrical Equipment Mounting Base

005033452
SCDL75033: RNCC: 3 | RNVC: 1
MT1163U: RNCC: 3 | RNVC: 2
PC1000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-3448
Electrical Equipment Rack

005033448
1600-298362060: RNCC: 3 | RNVC: 2
MT1142ARC: RNCC: 3 | RNVC: 2
M11A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-3465
Electrical Equipment Mounting Base

005033465
301D1988: RNCC: 3 | RNVC: 2
MT700GRC10: RNCC: 5 | RNVC: 2
SCDL40691: RNCC: 5 | RNVC: 2
SCDL35517: RNCC: 5 | RNVC: 2
301D1988: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-3449
Electrical Equipment Rack

005033449
1600-298362061: RNCC: 3 | RNVC: 2
MT1140ARC: RNCC: 5 | RNVC: 2
12502: RNCC: 5 | RNVC: 9
12502TYPEM12A: RNCC: 5 | RNVC: 9
M12A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-3403
Electrical Equipment Leg

005033403
GC434: RNCC: 3 | RNVC: 9
SCC136132: RNCC: 5 | RNVC: 2
GC434: RNCC: 5 | RNVC: 2
SC-C-136132: RNCC: 5 | RNVC: 9
SC-C-136132: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-0951
Electrical Equipment Cabinet

005030951
SM-D-481468: RNCC: 3 | RNVC: 2
SCDL75452: RNCC: 5 | RNVC: 2
CY1807G: RNCC: 5 | RNVC: 2
990: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-503-0801
Electrical Equipment Cabinet

005030801
MILR10909A: RNCC: 2 | RNVC: 2
CY1119U: RNCC: 5 | RNVC: 1
CY119FRR: RNCC: 5 | RNVC: 1
SCDL170731B: RNCC: 5 | RNVC: 1
CY1119AU: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-503-0760
Junction Box Cover

005030760
5736: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-501-7626
Electrical Box Connector

005017626
CGB7913: RNCC: 3 | RNVC: 2
68A5C573-1: RNCC: 5 | RNVC: 2
68A5C573: RNCC: 7 | RNVC: 2

9 Jul 1974

5975-00-501-6538
Junction Box

005016538
ASG6X6X4: RNCC: 3 | RNVC: 2

6 Jul 1974

5975-00-501-2441
Cable Strain Relief Bushing

005012441
SR4P4: RNCC: 3 | RNVC: 2
K481-7: RNCC: 5 | RNVC: 1
4P4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-501-2406
Junction Box

005012406
ZT112-144E-46: RNCC: 3 | RNVC: 2
ZT112-144E-46: RNCC: 5 | RNVC: 2
MT1224-064-228: RNCC: 5 | RNVC: 9
ZT112-144E-46: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-501-2140
Conduit Outlet

005012140
L67: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-501-1281
Electrical Conduit Adapter

005011281
AA50553-1-1-H-3-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-501-1157
Electrical Conduit Bushing

005011157
22586: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-501-0450
Electrical Equipment Rack

005010450
ED-314: RNCC: 3 | RNVC: 2
CR1771G: RNCC: 3 | RNVC: 9
EK314: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-501-0436
Junction Box

005010436
ZT38-46-40: RNCC: 3 | RNVC: 2
ZT38-46-40: RNCC: 5 | RNVC: 9
MT1120-064-216: RNCC: 5 | RNVC: 9
ZT38-46-40: RNCC: 5 | RNVC: 9
MT1120-063-116: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-499-9897
Cable Clamp Elbow

004999897
A316851: RNCC: 3 | RNVC: 9
A316851: RNCC: C | RNVC: 1

6 Jul 1974

5975-00-499-5741
Cable Rack Support

004995741
P422733: RNCC: 3 | RNVC: 2
P422733: RNCC: 3 | RNVC: 9
P422733: RNCC: 5 | RNVC: 9

6 Jul 1974

5975-00-499-0791
Junction Box

004990791
5-4-1606-8-3: RNCC: 3 | RNVC: 2
5-4-1606-8-3: RNCC: 5 | RNVC: 2

6 Jul 1974

5975-00-498-8065
Strand Service Sleeve

004988065
6453: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-498-8002
Support Pole

004988002
740: RNCC: 3 | RNVC: 2
7178: RNCC: 3 | RNVC: 2
LC16: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-498-6614
Electrical Conduit Adapter

004986614
E14305: RNCC: 3 | RNVC: 2
E14305: RNCC: 5 | RNVC: 9
711704-1: RNCC: 7 | RNVC: 2

17 Oct 1969

5975-00-498-6618
Electrical Conduit Coupling

004986618
E13107: RNCC: 3 | RNVC: 2
E13107: RNCC: 5 | RNVC: 9
712505-2: RNCC: 7 | RNVC: 2

17 Oct 1969

5975-00-498-2486
Electrical Wall Plate

004982486
SCB539584-1: RNCC: 3 | RNVC: 2

10 Oct 1969

5975-00-498-2464
Stuffing Tube

004982464
SCC28203GP1: RNCC: 3 | RNVC: 2

10 Oct 1969

5975-00-497-5409
Conduit Racew Elbow

004975409
44L: RNCC: 3 | RNVC: 2

2 Oct 1970

5975-00-497-2201
Electrical Cable Nipple

004972201
7970: RNCC: 3 | RNVC: 2
7970: RNCC: 5 | RNVC: 9

5 Feb 1971

5975-00-497-1926
Electrical Conduit Ferrule

004971926
AN3050-16: RNCC: 2 | RNVC: 2
7611100P47: RNCC: 5 | RNVC: 1
7614260PT15: RNCC: 5 | RNVC: 1
AN3050-16: RNCC: 5 | RNVC: 1
11-1-16: RNCC: 5 | RNVC: 1
102613101: RNCC: 5 | RNVC: 2
258-2680: RNCC: 5 | RNVC: 9
11-1-16: RNCC: 5 | RNVC: 9
212498: RNCC: 5 | RNVC: 9
650574-51: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-497-1731
Electrical Cable Nipple

004971731
TN-10: RNCC: 3 | RNVC: 2

13 Mar 1986

5975-00-497-0093
Electrical Conduit Elbow

004970093
325938: RNCC: 3 | RNVC: 2
325938: RNCC: 5 | RNVC: 9

8 Oct 1969

5975-00-496-3433
Tube Junction

004963433
B-3065: RNCC: 3 | RNVC: 2
49843: RNCC: 5 | RNVC: 9
WM-49843: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-495-6735
Ground C Type Clamp

004956735
G3405: RNCC: 3 | RNVC: 9

3 Feb 1971

5975-00-495-3345
Chassis Base

004953345
23C28004-21: RNCC: 3 | RNVC: 2

18 Mar 1972

5975-00-495-2984
Junction Box

004952984
Z40-56A20: RNCC: 3 | RNVC: 2
Z40-56A20: RNCC: 5 | RNVC: 9

18 Jun 1971

5975-00-494-7519
Electrical Conduit Clamp

004947519
67A230B34: RNCC: 3 | RNVC: 2

18 Mar 1972

5975-00-494-6810
Electrical Conduit Coupling Nut

004946810
10-183521-12: RNCC: 3 | RNVC: 2

18 Feb 1970

5975-00-494-6762
Electrical Conductor Bushing

004946762
1-38-0: RNCC: 3 | RNVC: 9
AP660: RNCC: C | RNVC: 1

27 Feb 1970

5975-00-494-0670
Electrical Wall Plate

004940670
PJ4B: RNCC: 3 | RNVC: 2
WS896: RNCC: 4 | RNVC: 1
91074: RNCC: 5 | RNVC: 9
91074: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-494-0703
Electrical Tie Down Mounting Base

004940703
348: RNCC: 3 | RNVC: 9
1348: RNCC: 5 | RNVC: 9
1348: RNCC: 5 | RNVC: 9
1348: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-494-0593
Electrical Box Connector

004940593
AA50553-2-1-G-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
BM21: RNCC: 5 | RNVC: 1
421275-4: RNCC: 5 | RNVC: 1
865542-1: RNCC: 5 | RNVC: 1
421275-4: RNCC: 5 | RNVC: 9
00156TYPE2CLASSBITEM14: RNCC: 5 | RNVC: 9
865542-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-493-7456
Rigid Metal Conduit Assembly

004937456
SCD446402: RNCC: 3 | RNVC: 2

20 Feb 1970

5975-00-493-3613
Blank Panel

004933613
CVC2538-2: RNCC: 3 | RNVC: 2

20 Feb 1970

5975-00-493-3614
Blank Panel

004933614
CVC2538-4: RNCC: 3 | RNVC: 2
CVC2538-4: RNCC: 5 | RNVC: 2

20 Feb 1970

5975-00-493-3140
Strain Electrical Conductor Clamp

004933140
867188: RNCC: 3 | RNVC: 2

13 Feb 1970

5975-00-492-9566
Electrical Cable Protector

004929566
787-8631-001: RNCC: 3 | RNVC: 2

11 Feb 1970

5975-00-492-8835
Electrical Tie Down Mounting Base

004928835
TC1105: RNCC: 3 | RNVC: 2
GP830C5N: RNCC: 5 | RNVC: 2

11 Feb 1970

5975-00-492-1587
Choke Filler

004921587
220473-2: RNCC: 3 | RNVC: 2

22 Mar 1972

5975-00-491-6434
Interconnecting Box

004916434
2101: RNCC: 3 | RNVC: 9

21 Sep 1970

5975-00-491-5434
Flexible Metal Conduit

004915434
1788369-9: RNCC: 3 | RNVC: 2
79718-2: RNCC: 5 | RNVC: 1

18 Jun 1969

5975-00-491-5433
Flexible Metal Conduit

004915433
1788369-4: RNCC: 3 | RNVC: 2
79718-1: RNCC: 5 | RNVC: 1
G120: RNCC: E | RNVC: 8

18 Jun 1969

5975-00-491-5407
Connector Sleeve

004915407
1744434-2: RNCC: 3 | RNVC: 2
G1-18210-2-5: RNCC: 5 | RNVC: 1
1788834PC2: RNCC: 5 | RNVC: 2
34-2: RNCC: 5 | RNVC: 2
1788834PC2: RNCC: 5 | RNVC: 9
1788834-2: RNCC: 5 | RNVC: 9
178834-2: RNCC: 5 | RNVC: 9

6 Jun 1969

5975-00-491-2976
Control Modul Plate

004912976
8070000159: RNCC: 3 | RNVC: 9

18 Sep 1970

5975-00-491-2238
Electrical Conductor Bushing

004912238
2561025-1: RNCC: 3 | RNVC: 2

27 Jun 1974

5975-00-491-1329
Electrical-Electronic Equipment Chassis

004911329
05214-0004: RNCC: 3 | RNVC: 2
05214-0004: RNCC: 3 | RNVC: 9
05214-0004: RNCC: 5 | RNVC: 9

26 Sep 1969

5975-00-491-0491
Plate

004910491
10937137: RNCC: 3 | RNVC: 2

2 Jul 1974

5975-00-490-7187
Rigid Metal Conduit

004907187
31-1399-2: RNCC: 3 | RNVC: 2

1 Oct 1969

5975-00-490-6086
Conduit Elbow Half

004906086
LS7092-2-1: RNCC: 3 | RNVC: 2

24 Sep 1969

5975-00-490-5786
Electrical-Electronic Equipment Chassis

004905786
SC-D-446233: RNCC: 3 | RNVC: 2
SC-D-446233: RNCC: 5 | RNVC: 2
SC-D-446233: RNCC: 5 | RNVC: 9

24 Sep 1969

5975-00-490-5785
Electrical-Electronic Equipment Chassis

004905785
SC-D-446232: RNCC: 3 | RNVC: 2
SC-D-446232: RNCC: 5 | RNVC: 9
SC-D-446232: RNCC: C | RNVC: 1

24 Sep 1969

5975-00-490-5647
Electrical Equipment Drawer

004905647
SC-D-578260: RNCC: 3 | RNVC: 2

24 Sep 1969

5975-00-490-1119
Electrical-Electronic Equipment Chassis

004901119
27819-12: RNCC: 3 | RNVC: 9

14 Mar 1972

5975-00-490-1120
Electrical-Electronic Equipment Chassis

004901120
27819-13: RNCC: 3 | RNVC: 9

14 Mar 1972

5975-00-489-6115
Electrical-Electronic Equipment Panel

004896115
SM-B-618014: RNCC: 3 | RNVC: 2
SM-E-618015: RNCC: 5 | RNVC: 2

25 May 1970

5975-00-489-3162
Cable Rack Extension

004893162
120571RH: RNCC: 3 | RNVC: 2
21170001-2: RNCC: 5 | RNVC: 9

28 May 1970

5975-00-489-2767
Conduit Outlet

004892767
GST75-20: RNCC: 3 | RNVC: 2

28 May 1970

Load More Results