What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 190 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 190of 491

5975-00-889-8616
Raceway Connector

008898616
LD4C: RNCC: 3 | RNVC: 2
LD4C: RNCC: 5 | RNVC: 9
LD4C: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-889-8620
Junction Box Extension

008898620
251: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-889-8618
Raceway Connector

008898618
LD6C: RNCC: 3 | RNVC: 2
AB-66UC: RNCC: 5 | RNVC: 2
LD6C: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-889-8615
90 Degrees Raceway Elbow

008898615
LD490L: RNCC: 3 | RNVC: 2
AB44L90G: RNCC: 5 | RNVC: 2
F44G90E: RNCC: 5 | RNVC: 2
LD490LGRYGRN: RNCC: 5 | RNVC: 2
LD490L: RNCC: 5 | RNVC: 9
LD490LGRYGRN: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-889-8611
Electrical-Electronic Equipment Chassis

008898611
AC403: RNCC: 3 | RNVC: 2
DC153A: RNCC: 5 | RNVC: 2
ACH-5X9.5X2: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-889-8608
Electrical-Electronic Equipment Chassis

008898608
AC-422: RNCC: 3 | RNVC: 2
AC422: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-889-8586
Electrical Cable Nipple

008898586
400801D: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-889-7634
Crossarm Brace

008897634
8128: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-889-7291
Rigid Metal Conduit Assembly

008897291
50-345467-7: RNCC: 3 | RNVC: 9
50-345467-7: RNCC: C | RNVC: 1

3 Apr 1968

5975-00-889-0496
Electrical-Electronic Equipment Chassis

008890496
544-6484-005: RNCC: 3 | RNVC: 2

10 Apr 1968

5975-00-888-3969
Electrical Equipment Mounting Base

008883969
138287-01: RNCC: 3 | RNVC: 2
42831: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-888-1487
Conduit Outlet Cover

008881487
RSP8: RNCC: 3 | RNVC: 2
RSP8: RNCC: 5 | RNVC: 9

5 Apr 1968

5975-00-888-1178
Blank Panel

008881178
162898: RNCC: 3 | RNVC: 9
162898: RNCC: 5 | RNVC: 9
162898: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-886-8200
Power Supply Drawer

008868200
D1752ALL: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-886-6332
Electrical Equipment Mounting Base

008866332
153882: RNCC: 3 | RNVC: 2
153882: RNCC: 5 | RNVC: 9
153882: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-886-4648
Slide Mounting Bracket

008864648
BR124: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-885-9006
Electrical Components Tie Down Strap

008859006
TY307: RNCC: 3 | RNVC: 2

20 Nov 1967

5975-00-884-4734
Electrical Equipment Rack

008844734
11069308: RNCC: 3 | RNVC: 2

20 Nov 1967

5975-00-884-2490
Electrical-Electronic Equipment Panel

008842490
SMD414517: RNCC: 3 | RNVC: 2
813157: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-883-4888
Electrical-Electronic Equipment Chassis

008834888
101006: RNCC: 3 | RNVC: 9
5800332-1510-000: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-883-4887
Electrical-Electronic Equipment Chassis

008834887
101044: RNCC: 3 | RNVC: 9
5800332-1810-000: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-883-1321
Junction Box Cover

008831321
9179987: RNCC: 3 | RNVC: 2

15 Nov 1967

5975-00-882-9780
Electrical-Electronic Equipment Chassis

008829780
GS132-001-1: RNCC: 3 | RNVC: 2
170489-1: RNCC: 5 | RNVC: 9

13 Nov 1967

5975-00-882-6205
Electrical Conduit Coupling

008826205
20006-622A1-1: RNCC: 3 | RNVC: 2

13 Nov 1967

5975-00-882-4941
Electrical Equipment Mounting Base

008824941
6329265-1: RNCC: 3 | RNVC: 9
A51A9117-19: RNCC: 5 | RNVC: 9
A51A9117-19: RNCC: 5 | RNVC: 9
MT-4355/ASA-79: RNCC: 5 | RNVC: 9

5 May 1972

5975-00-882-4157
Electrical Wall Plate

008824157
53A536: RNCC: 3 | RNVC: 2

10 Nov 1967

5975-00-882-4048
Electrical Box Connector

008824048
8223: RNCC: 3 | RNVC: 2
711799-025: RNCC: 5 | RNVC: 1
711799-025: RNCC: 5 | RNVC: 1
1751B: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-881-8856
Stuffing Tube

008818856
815F1197218: RNCC: 3 | RNVC: 1
815-1197218PC1-3T014: RNCC: 5 | RNVC: 1
815-1197218SYM538LESSPC2: RNCC: 5 | RNVC: 1
815-1197218PC1-3T014L1: RNCC: 5 | RNVC: 1
815-1197218SYM538LESSPC2L1: RNCC: 5 | RNVC: 1
815F1197218L1: RNCC: 5 | RNVC: 1

5 May 1972

5975-00-881-6881
Stuffing Tube

008816881
A5186: RNCC: 3 | RNVC: 9
390MAJ1: RNCC: 5 | RNVC: 9
P67490: RNCC: 5 | RNVC: 9
B7815-9: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-881-6273
Stuffing Tube

008816273
M24235-1-008: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

11 Jul 1985

5975-00-881-6275
Stuffing Tube

008816275
M24235-1-009SYMB0L2413: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-881-6272
Stuffing Tube

008816272
M24235-1-008SYMB0L2412: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-881-6271
Stuffing Tube

008816271
M24235-1-007: RNCC: 2 | RNVC: 1
MILS24235: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-881-6270
Stuffing Tube

008816270
M24235-1-007SYMB0L2411: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1
815-1197030SYMB0L2411: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-881-6268
Stuffing Tube

008816268
M24235-1-006SYMB0L2410: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-881-6266
Stuffing Tube

008816266
M24235-1-005SYMB0L2409: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-881-6264
Stuffing Tube

008816264
M24235-1-004: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-880-7363
Junction Box

008807363
5738A: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-880-7360
Junction Box

008807360
LXWOW-25: RNCC: 3 | RNVC: 2
LXW: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-880-6240
Electrical-Electronic Equipment Chassis

008806240
CB1372: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-880-6239
Electrical-Electronic Equipment Chassis

008806239
CB1371: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-880-5667
Electrical Equipment Rack

008805667
RR-1363-BT: RNCC: 3 | RNVC: 2
DL89-5156: RNCC: 3 | RNVC: 2
RX193: RNCC: 5 | RNVC: 2
RR1363: RNCC: 5 | RNVC: 9
9002-414: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-880-3143
Blank Panel

008803143
SFA1838: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-879-8430
Electrical Conduit Ferrule

008798430
59383: RNCC: 3 | RNVC: 9

10 Nov 1967

5975-00-879-7284
Electrical Box Connector

008797284
STA2: RNCC: 3 | RNVC: 9
10332150: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-879-7166
Conduit Outlet

008797166
FDC12: RNCC: 3 | RNVC: 2
FDC-2-50: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-879-6542
Rigid Metal Conduit Assembly

008796542
14476: RNCC: 3 | RNVC: 2
S6125-50150-4: RNCC: 7 | RNVC: 2

30 Oct 1967

5975-00-879-6225
Cable Strain Relief Bushing

008796225
1114: RNCC: 3 | RNVC: 2
SR4K1: RNCC: 3 | RNVC: 2
9976433: RNCC: D | RNVC: 9

1 Jan 1962

5975-00-879-5753
Electrical Cable Nipple

008795753
8140000133: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-879-5755
Electrical Cable Nipple

008795755
8140000134: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-879-3735
Conduit Outlet

008793735
AA50563-207AEEEC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FS-1-100: RNCC: 5 | RNVC: 1
FS3: RNCC: 5 | RNVC: 1
FS-100: RNCC: 5 | RNVC: 9
FS3: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-879-3613
Junction Box

008793613
6100: RNCC: 3 | RNVC: 2
3005: RNCC: 5 | RNVC: 2

20 Oct 1967

5975-00-878-6870
Electrical Cable Splice Protector

008786870
S525312-10FT: RNCC: 3 | RNVC: 9
3-120IN: RNCC: 5 | RNVC: 9
S6827-10FT: RNCC: 5 | RNVC: 9
S7076: RNCC: 5 | RNVC: 9

15 Sep 1967

5975-00-878-5394
Electrical Box Connector

008785394
CGBS1013: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-878-5154
Flexible Metal Conduit

008785154
HWS-3/4: RNCC: 3 | RNVC: 2
WWC566: RNCC: 4 | RNVC: 1
3-4SEALTITE: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-878-5153
Flexible Metal Conduit

008785153
WWC566: RNCC: 4 | RNVC: 1
1-2SEALTITE: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-878-5151
Electrical Box Connector

008785151
92T100: RNCC: 3 | RNVC: 2
64540: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-878-5150
Electrical Box Connector

008785150
92T075: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-878-4873
Electrical Box Connector

008784873
8521: RNCC: 3 | RNVC: 2
AS8384: RNCC: 5 | RNVC: 1
HC-405: RNCC: 5 | RNVC: 2
1806: RNCC: 5 | RNVC: 2
NTC-150: RNCC: 5 | RNVC: 2
31-150: RNCC: 5 | RNVC: 9
1754: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-878-3171
Electrical-Electronic Equipment Chassis

008783171
2064489G002: RNCC: 3 | RNVC: 2

1 Sep 1967

5975-00-878-2279
Engine Spacer

008782279
596978: RNCC: 3 | RNVC: 9
596978: RNCC: 5 | RNVC: 9

30 Aug 1967

5975-00-878-2251
Electrical Cable Nipple

008782251
436505-10: RNCC: 3 | RNVC: 2
56099: RNCC: 5 | RNVC: 9

30 Aug 1967

5975-00-878-2197
Engine Spacer

008782197
596977: RNCC: 3 | RNVC: 2
596977: RNCC: 5 | RNVC: 9

30 Aug 1967

5975-00-878-2199
Engine Spacer

008782199
437320-03: RNCC: 3 | RNVC: 2
596976: RNCC: 5 | RNVC: 2
T-37320: RNCC: 5 | RNVC: 9

30 Aug 1967

5975-00-878-1141
Rigid Metal Conduit Assembly

008781141
20144-36 3-8: RNCC: 3 | RNVC: 2
A02ES523-33: RNCC: 7 | RNVC: 2

1 Jan 1960

5975-00-878-0647
Elbow

008780647
A11053-1: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-877-4876
Chassis Base

008774876
531680: RNCC: 3 | RNVC: 2
531680: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-877-1051
Stop Bushing

008771051
SL66-1: RNCC: 3 | RNVC: 2

16 Aug 1967

5975-00-877-0977
Stop Bushing

008770977
SL39: RNCC: 3 | RNVC: 2
SL39: RNCC: 5 | RNVC: 9

16 Aug 1967

5975-00-877-0952
Stop Bushing

008770952
SL3A: RNCC: 3 | RNVC: 2

16 Aug 1967

5975-00-876-9651
Junction Box

008769651
VXA1: RNCC: 3 | RNVC: 2

8 Nov 1967

5975-00-876-9643
Pendant Tassel

008769643
1801: RNCC: 3 | RNVC: 9

8 Nov 1967

5975-00-876-9339
Rigid Metal Conduit Assembly

008769339
65C9823: RNCC: 3 | RNVC: 2

8 Nov 1967

5975-00-876-4299
Rigid Metal Conduit Assembly

008764299
32-65439-57: RNCC: 3 | RNVC: 2

6 Nov 1967

5975-00-875-0925
Electrical Equipment Shelf

008750925
SC-D-425890: RNCC: 3 | RNVC: 2
SC-D-425890: RNCC: 5 | RNVC: 9
SC-DL-425881: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-875-0935
Hanger

008750935
SCB48750: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-874-6950
Ground Rod

008746950
1047-417D2: RNCC: 3 | RNVC: 2
X1509: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-873-3002
Interconnecting Box

008733002
DR23B2: RNCC: 3 | RNVC: 2
DR23B2: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-872-9544
Electrical Components Tie Down Strap

008729544
PMEB106: RNCC: 3 | RNVC: 2

1 Nov 1967

5975-00-872-5814
Leg Section

008725814
9065716: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-872-0759
Service Fitting

008720759
GS-100: RNCC: 3 | RNVC: 2
G5-100: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-872-0421
Electrical Equipment Mounting Base

008720421
522-3970-001: RNCC: 3 | RNVC: 2
522-3970-001: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-871-9202
Retainer

008719202
17B6-3: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-871-9123
Electrical Equipment Mounting Base

008719123
761-0635-002: RNCC: 3 | RNVC: 2
790Y2: RNCC: 5 | RNVC: 2
MT-3772/A: RNCC: 5 | RNVC: 2
670765-109: RNCC: 5 | RNVC: 2
790Y2: RNCC: C | RNVC: 1

1 Jan 1960

5975-00-870-5795
Metallic Raceway

008705795
LD4T: RNCC: 3 | RNVC: 2
LD4T: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-870-5793
Raceway Electrical Conduit Adapter

008705793
LD-44A: RNCC: 3 | RNVC: 2
LD-44A: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-870-2405
Cable Boot Kit

008702405
ZRT1374: RNCC: 3 | RNVC: 9
ZRT1374: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-870-2404
Cable Boot Kit

008702404
ZRT1373: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-870-2407
Cable Boot Kit

008702407
ZRT1376: RNCC: 3 | RNVC: 2
ZRT1376: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-870-2406
Cable Boot Kit

008702406
ZRT1375: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-870-2403
Cable Boot Kit

008702403
ZRT1372: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-869-9472
Mounting Plate

008699472
22340: RNCC: 3 | RNVC: 2
22340: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-869-5537
Rigid Metal Conduit Assembly

008695537
21935: RNCC: 3 | RNVC: 2
S6127-61801-5: RNCC: 5 | RNVC: 2
21870: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-869-5541
Junction Box Cover

008695541
3K11378-105: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-869-2361
Junction Box Cover

008692361
204-075-548-1: RNCC: 3 | RNVC: 2
204-075-548-1: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-868-9714
Electrical Equipment Rack

008689714
751: RNCC: 3 | RNVC: 2
751: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-868-9687
Electrical Equipment Rack

008689687
750: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-868-8772
Electrical Equipment Mounting Base

008688772
15045-3: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-868-5643
Missile Leg Section

008685643
10064219: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-868-2356
Electrical Equipment Mounting Base

008682356
544-8609-004: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-867-9955
Duct Tee

008679955
LDB6A: RNCC: 3 | RNVC: 2
LD66A: RNCC: 5 | RNVC: 9
LD66A: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-867-7475
Conduit Outlet

008677475
FDA2: RNCC: 3 | RNVC: 2
FDA-1-75: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-867-7474
Conduit Outlet

008677474
FDC3: RNCC: 3 | RNVC: 2
FDC-1-100: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-867-4780
Electrical Equipment Rack

008674780
D5047-2: RNCC: 3 | RNVC: 2

11 Sep 2000

5975-00-867-1819
Metallic Raceway

008671819
LD64: RNCC: 3 | RNVC: 2
AB6648HCGK: RNCC: 5 | RNVC: 2
LD64: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-867-1817
Metallic Raceway

008671817
LD85: RNCC: 3 | RNVC: 2
LD85: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-867-1823
Metallic Raceway

008671823
LD44: RNCC: 3 | RNVC: 2
LD44: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-867-1771
Bracket

008671771
LD6GB: RNCC: 3 | RNVC: 2
LD6GB: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-866-3698
Fanning Strip

008663698
024-100003: RNCC: 3 | RNVC: 2

23 Apr 1972

5975-00-864-8232
Insulator Pin

008648232
J715: RNCC: 3 | RNVC: 2
2162: RNCC: 5 | RNVC: 9
J583: RNCC: 5 | RNVC: 9
36751F: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-864-3758
Electrical Conduit Adapter

008643758
10-325087-203: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-864-3759
Electrical Conduit Adapter

008643759
10-325087-223: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-864-0361
Electrical Conduit Bushing

008640361
1769-112: RNCC: 3 | RNVC: 2

21 Apr 1972

5975-00-863-9089
Electrical Conduit Bushing

008639089
2399-18: RNCC: 3 | RNVC: 2

21 Apr 1972

5975-00-863-3860
Junction Box Cover

008633860
114E2077-3: RNCC: 3 | RNVC: 2
114E2077-3: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-863-3661
Electrical Equipment Shelf

008633661
222M0DEL5: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-862-4506
Closure Strip

008624506
G-969: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-862-2492
Electrical-Electronic Equipment Chassis

008622492
CE93513: RNCC: 3 | RNVC: 2
CE93513: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-862-2467
Cover Assembl Panel

008622467
CE93356: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-862-2468
Cover Assembl Panel

008622468
CE93359: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-861-6693
Junction Box Extension

008616693
5751-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-861-2522
Electrical Cable Nipple

008612522
108992-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-860-6305
Electrical-Electronic Equipment Chassis

008606305
3321-810: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-860-5225
Electrical Conduit Ferrule

008605225
38003: RNCC: 3 | RNVC: 2
38003: RNCC: 5 | RNVC: 9

6 Oct 1967

5975-00-859-9906
Electrical Conduit End Seal Cap

008599906
555058-1: RNCC: 3 | RNVC: 2

6 Oct 1967

5975-00-859-7009
Electrical-Electronic Equipment Chassis

008597009
3321-860: RNCC: 3 | RNVC: 2
CH-458/APN-147(V): RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-859-2179
Electrical Conduit Elbow

008592179
FF90-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-858-8293
Blank Panel

008588293
10066535: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-857-9127
Electrical Box Connector

008579127
2020: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-857-3515
Electrical Nonmetallic Conduit Assembly

008573515
ECLK110: RNCC: 3 | RNVC: 2
EXLK110: RNCC: 5 | RNVC: 2
ECK110: RNCC: 5 | RNVC: 2
ECLK-50-10: RNCC: 5 | RNVC: 9

11 Oct 1967

5975-00-857-2708
Electrical Equipment Leg Section

008572708
10044500: RNCC: 3 | RNVC: 2

4 Oct 1967

5975-00-857-0534
Hanger Assembly

008570534
SCB48625: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-856-8408
El Reducing Bushing

008568408
RB200-125: RNCC: 3 | RNVC: 2
614: RNCC: 5 | RNVC: 2
13314: RNCC: 5 | RNVC: 9
365-S: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-855-7058
Rigid Metal Conduit

008557058
UL-6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WWC540: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-855-7053
Rigid Metal Conduit

008557053
ANSI-UL-6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WWC540: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-855-7057
Rigid Metal Conduit

008557057
UL-6: RNCC: 3 | RNVC: 1

1 Jan 1962

5975-00-855-7052
Rigid Metal Conduit

008557052
UL-6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WWC540: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-855-7055
Rigid Metal Conduit

008557055
UL-6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WWC540: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-855-5766
Electrical Equipment Leg Section

008555766
10044498: RNCC: 3 | RNVC: 2

29 Sep 1967

5975-00-855-4623
Electrical-Electronic Equipment Chassis

008554623
101010: RNCC: 3 | RNVC: 2
5800765-810010-000: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-855-2652
Electrical-Electronic Equipment Chassis

008552652
101011: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-855-2397
Electrical-Electronic Equipment Chassis

008552397
101125: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-854-6519
Cable Guide

008546519
9057105: RNCC: 3 | RNVC: 2
9057105: RNCC: 5 | RNVC: 1

27 Sep 1967

5975-00-853-7798
Electrical-Electronic Equipment Chassis

008537798
179796: RNCC: 3 | RNVC: 2
179796: RNCC: 5 | RNVC: 9

30 Nov 1966

5975-00-853-5884
Electrical-Electronic Equipment Chassis

008535884
SM-D-413802: RNCC: 3 | RNVC: 2
810119-2: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-853-3993
Conduit Outlet

008533993
AA50563-104ATTAE: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
T58: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
A-A-50536/I-4-T: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-853-3985
Electrical Box Connector

008533985
AC18: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-853-3974
Conduit Outlet Cover

008533974
SS232: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-852-6583
Electrical-Electronic Equipment Chassis

008526583
SM-D-336803: RNCC: 3 | RNVC: 2
SM-D-482362: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-852-4811
Conduit Outlet

008524811
LR69: RNCC: 3 | RNVC: 2
019-5044-100: RNCC: C | RNVC: 1

22 Nov 1966

5975-00-852-4813
Conduit Outlet

008524813
T69: RNCC: 3 | RNVC: 2
019-5044-110: RNCC: C | RNVC: 1

22 Nov 1966

5975-00-852-4808
Conduit Outlet

008524808
LL69: RNCC: 3 | RNVC: 2
APPLL200A: RNCC: 5 | RNVC: 2
LL-200-A: RNCC: 5 | RNVC: 9
10-204: RNCC: 5 | RNVC: 9
LL-69: RNCC: 5 | RNVC: 9
019-5044-090: RNCC: C | RNVC: 1

22 Nov 1966

5975-00-852-4304
Ground Rod

008524304
7335: RNCC: 3 | RNVC: 2
478156-501: RNCC: 5 | RNVC: 9
478156-501: RNCC: 5 | RNVC: 9
AD4034258: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-852-1934
Conduit Outlet

008521934
GRL125: RNCC: 3 | RNVC: 2
GUAL47: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-851-6085
Electrical Equipment Cabinet

008516085
708522-1: RNCC: 3 | RNVC: 2
CY3184ARC34B: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-851-0791
Electrical Equipment Leg Section

008510791
9079242: RNCC: 3 | RNVC: 2

9 Jan 1967

5975-00-850-6705
Blank Panel

008506705
64A215289: RNCC: 3 | RNVC: 2

6 Jan 1967

5975-00-849-7922
Electrical-Electronic Equipment Chassis

008497922
545-9053-001: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-849-7768
Electrical Components Tie Down Strap

008497768
606277: RNCC: 3 | RNVC: 2
606277: RNCC: 5 | RNVC: 2

4 Jan 1967

5975-00-849-6712
Electrical Entrance Cap

008496712
F485: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-849-6704
Electrical Conduit Nipple

008496704
1 1-2X6NIPPLE: RNCC: 3 | RNVC: 9
1 1-2X6NIPPLE: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-849-3915
Junction Box

008493915
PULLB0X009X6X3: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-849-3914
Junction Box

008493914
SC060804NK: RNCC: 3 | RNVC: 2
SC684NK: RNCC: 3 | RNVC: 9
17870: RNCC: 5 | RNVC: 9
PULLB0X6X8X4: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-849-3393
Conduit Outlet

008493393
FD02: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-849-3083
Flexible Nonmetallic Conduit

008493083
9053876: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-848-6187
Conduit Outlet

008486187
GUAT37: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-848-6190
Conduit Outlet

008486190
GUAB36: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-847-7885
Electrical Equipment Mounting Base

008477885
3921-2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-846-8398
Conduit Outlet

008468398
LR107: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
LR400-M: RNCC: 5 | RNVC: 2
LR-400G: RNCC: 5 | RNVC: 9
70-40: RNCC: 5 | RNVC: 9
LR107: RNCC: 5 | RNVC: 9
LR-400G: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-846-8396
Conduit Outlet

008468396
L57: RNCC: 3 | RNVC: 2
WC586: RNCC: E | RNVC: 8
LRL150M: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-846-5086
Interconnecting Box

008465086
124E311-1V1: RNCC: 3 | RNVC: 2
124E311-1V1: RNCC: 3 | RNVC: 9
124E311-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-846-2785
Electrical Cable Protector

008462785
5297132: RNCC: 3 | RNVC: 2

30 Dec 1966

5975-00-845-9453
Electrical Conduit Elbow

008459453
FF90-1: RNCC: 3 | RNVC: 2
9965931: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-845-0899
Electrical Conduit Adapter

008450899
1440: RNCC: 3 | RNVC: 2
11-50: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-845-0898
Electrical Conduit Adapter

008450898
CGK295: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-844-7370
Electrical Cable Nipple

008447370
1889921: RNCC: 3 | RNVC: 2
1889921: RNCC: 5 | RNVC: 2
17509: RNCC: 5 | RNVC: 9

30 Dec 1966

5975-00-844-7084
Electrical Box Connector

008447084
DHF6: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-844-6316
Electrical Cable Nipple

008446316
418559: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-844-5075
Offset Raceway Connector

008445075
3086: RNCC: 3 | RNVC: 2
PC412800045F1: RNCC: 5 | RNVC: 2
PC412800045F1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-844-2892
Electrical Cable Nipple

008442892
10-176142: RNCC: 3 | RNVC: 9
10-176142: RNCC: 5 | RNVC: 9
10-176142: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-844-2451
Blank Panel

008442451
9192012: RNCC: 3 | RNVC: 2
9192012: RNCC: 5 | RNVC: 2
9192012: RNCC: 5 | RNVC: 2
9192012: RNCC: 5 | RNVC: 9

27 Sep 1967

5975-00-843-1798
Electrical Cable Nipple

008431798
418560: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-842-3350
Coupler Tray

008423350
761-0635-001: RNCC: 3 | RNVC: 2
761-0635-001: RNCC: 5 | RNVC: 9

23 Dec 1966

5975-00-842-1944
Electrical Cable Nipple

008421944
707754: RNCC: 3 | RNVC: 2
5562: RNCC: 5 | RNVC: 2
707754: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-841-5857
Cable Marker Sleeve

008415857
68897: RNCC: 3 | RNVC: 2
68897: RNCC: 5 | RNVC: 9

28 Dec 1966

5975-00-840-4802
Electrical Cable Protector

008404802
10864350: RNCC: 3 | RNVC: 2
2590008404802: RNCC: 6 | RNVC: 9

19 Dec 1966

5975-00-840-2830
Blank Panel

008402830
9084836: RNCC: 3 | RNVC: 2

25 Oct 1967

5975-00-839-9918
Conduit Outlet

008399918
WC586: RNCC: 4 | RNVC: 1

21 Dec 1966

5975-00-839-9753
Conduit Outlet

008399753
FSC2: RNCC: 3 | RNVC: 2
FSC2SA: RNCC: 3 | RNVC: 2
WC586A: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-839-9444
Conduit Outlet

008399444
AA50563-208AXXXB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FD-1-75A: RNCC: 5 | RNVC: 1
FD2SA: RNCC: 5 | RNVC: 1
FD2A: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
FD1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-839-9440
Conduit Outlet

008399440
2FD3: RNCC: 3 | RNVC: 2
FD32A: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-839-9443
Conduit Outlet

008399443
FD1A: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1
A3178930-2: RNCC: 5 | RNVC: 2
FD1: RNCC: 5 | RNVC: 2
FD1: RNCC: 5 | RNVC: 2
82-2729885-1: RNCC: 5 | RNVC: 2
FD1SA: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-839-7281
Conduit Outlet

008397281
LB2355AND35070: RNCC: 3 | RNVC: 2
LB57MTAND570F: RNCC: 3 | RNVC: 2
WC586TYPE1DESIGN3STYLELB: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-839-5328
Conduit Outlet

008395328
T67AND670F: RNCC: 3 | RNVC: 2
APP T67 AND APP 670F: RNCC: 5 | RNVC: 2
T356AND35090: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-839-5326
Conduit Outlet

008395326
T150MANDK150CM: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-839-5323
Conduit Outlet

008395323
AA50563-101ATTABAL: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
T27SA: RNCC: 5 | RNVC: 1
9322108: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
0T2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-839-3932
Rack Avionics Shelf

008393932
4K12150-103A: RNCC: 3 | RNVC: 2

15 Sep 1967

5975-00-838-9322
Junction Box

008389322
63F52036-7: RNCC: 3 | RNVC: 2

4 May 1970

5975-00-838-8208
Electrical Components Tie Down Strap

008388208
TYF15: RNCC: 3 | RNVC: 2
TYF35M0: RNCC: E | RNVC: 8
TYF35N0: RNCC: E | RNVC: 8
990C768H01: RNCC: E | RNVC: 8

15 Sep 1967

5975-00-838-7907
Electrical Conduit Sealing Fitting

008387907
EYS46: RNCC: 3 | RNVC: 2
EYM-125: RNCC: 5 | RNVC: 2
EYAM-125: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-838-4913
Toggle Pin

008384913
36752: RNCC: 3 | RNVC: 9

9 Dec 1966

5975-00-837-2260
Junction Box

008372260
10956261: RNCC: 3 | RNVC: 2

15 Sep 1967

5975-00-837-1550
Junction Box

008371550
11067575: RNCC: 3 | RNVC: 2

7 Dec 1966

5975-00-836-8592
Special Shape Conduit

008368592
BL8451: RNCC: 3 | RNVC: 2
BL8451: RNCC: 5 | RNVC: 2

5 Dec 1966

5975-00-836-8598
Electrical C Hanger

008368598
209-030-573-1: RNCC: 3 | RNVC: 2

5 Dec 1966

5975-00-836-8596
Electrical C Hanger

008368596
209-030-521-1: RNCC: 3 | RNVC: 2

5 Dec 1966

5975-00-836-4761
Electrical Conduit Nipple

008364761
74635A: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-836-3376
Flexible Metal Conduit Assembly

008363376
7000-69: RNCC: 3 | RNVC: 2

2 Dec 1966

5975-00-835-7752
Conduit Outlet

008357752
GUJC16: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-834-7840
Electrical Conduit Adapter

008347840
53-73204-5: RNCC: 3 | RNVC: 2

13 Sep 1967

5975-00-834-7164
Interconnecting Box

008347164
J2698UR: RNCC: 3 | RNVC: 2

25 Nov 1966

5975-00-834-6812
Conduit Outlet

008346812
GUAC14: RNCC: 3 | RNVC: 2
640458-1: RNCC: 5 | RNVC: 9
40002: RNCC: 5 | RNVC: 9
GUAC-50: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-834-1821
Cable Lacing Spacer

008341821
B0M4829: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1809
Mounting Duct Bracket

008341809
B0M4827: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1819
Duct Bracket

008341819
B0M4828: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1803
Duct End Cover

008341803
QAP-170: RNCC: 3 | RNVC: 2
B0M4825: RNCC: 5 | RNVC: 9

13 Sep 1967

5975-00-834-1801
Duct Riser

008341801
B0M4823: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1807
Duct Adaptor

008341807
B0M4826: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1802
Duct Riser

008341802
B0M4824: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1796
Duct Elbow

008341796
B0M4822: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1794
Duct Cross

008341794
B0M4821: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1782
Metallic Raceway

008341782
B0M4817: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1781
Metallic Raceway

008341781
QAP-179: RNCC: 3 | RNVC: 2
B0M4816: RNCC: 5 | RNVC: 9

13 Sep 1967

5975-00-834-1791
Duct Tee

008341791
B0M4820: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1777
Metallic Raceway

008341777
B0M4815: RNCC: 3 | RNVC: 9

13 Sep 1967

5975-00-834-1094
Conduit Outlet

008341094
TB67: RNCC: 3 | RNVC: 1
WC586: RNCC: 4 | RNVC: 1
TB-200G: RNCC: 5 | RNVC: 9
TB67: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-833-9596
Flexible Metal Conduit Assembly

008339596
50188: RNCC: 3 | RNVC: 2
50188: RNCC: 5 | RNVC: 9

11 Sep 1967

5975-00-833-7630
Electrical Box Connector

008337630
CGB4911: RNCC: 3 | RNVC: 2
795-323: RNCC: 5 | RNVC: 2
0795-323: RNCC: 5 | RNVC: 2

15 Sep 1967

5975-00-833-7626
Electrical Box Connector

008337626
CGB197: RNCC: 3 | RNVC: 2

15 Sep 1967

5975-00-833-7598
Electrical Conduit Union

008337598
EC75: RNCC: 3 | RNVC: 2
13701: RNCC: 5 | RNVC: 9
271-S: RNCC: 5 | RNVC: 9

15 Sep 1967

5975-00-833-7596
Electrical Conduit Union

008337596
EC-300: RNCC: 3 | RNVC: 2
227-S: RNCC: 5 | RNVC: 9
4-300: RNCC: 5 | RNVC: 9
13707: RNCC: 5 | RNVC: 9

15 Sep 1967

5975-00-833-2398
Electrical Equipment Mounting Base

008332398
20156-1A: RNCC: 3 | RNVC: 2
4101831: RNCC: 5 | RNVC: 9

15 Sep 1967

5975-00-832-9036
Clamp Jaw

008329036
SM-B-540771: RNCC: 3 | RNVC: 2

28 Mar 1967

5975-00-832-7575
Electrical-Electronic Equipment Chassis

008327575
SC-C-446098: RNCC: 3 | RNVC: 2

15 Mar 1967

5975-00-832-6281
Electrical Cable Splice Protector

008326281
6IN.X3/16X72IN.: RNCC: 3 | RNVC: 9
S525974-6FT: RNCC: 5 | RNVC: 9

8 Mar 1967

5975-00-832-6176
Protected Cap

008326176
SM-B-601464: RNCC: 3 | RNVC: 2

8 Mar 1967

5975-00-832-6175
Protected Cap

008326175
SM-B-601463: RNCC: 3 | RNVC: 2

8 Mar 1967

5975-00-832-5418
Electrical Conduit Ferrule

008325418
73773: RNCC: 3 | RNVC: 2
73773: RNCC: 5 | RNVC: 9

1 Mar 1967

5975-00-832-5052
Splice Plate Tray

008325052
B0M4568: RNCC: 3 | RNVC: 9

24 Feb 1967

5975-00-832-0563
Blank Panel

008320563
784-5643-001: RNCC: 3 | RNVC: 2
784-5643-001: RNCC: 5 | RNVC: 9
A03650238: RNCC: 5 | RNVC: 9

26 Apr 1972

5975-00-829-6738
Cable Support Cradle

008296738
INSULOID C1: RNCC: 3 | RNVC: 9

7 Jul 1980

5975-00-828-9556
Chassis Base

008289556
J52H0422-4: RNCC: 3 | RNVC: 9

30 Aug 1967

5975-00-827-1107
Electrical Grounding Plate

008271107
8565682: RNCC: 3 | RNVC: 9
8565682: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-827-0932
Electrical Connector

008270932
C42798: RNCC: 3 | RNVC: 2

23 Aug 1967

5975-00-826-5700
Electrical Conduit Ferrule

008265700
STF100: RNCC: 3 | RNVC: 2
14-100: RNCC: 5 | RNVC: 9

21 Aug 1967

5975-00-826-5064
Junction Box

008265064
63C52023-1: RNCC: 3 | RNVC: 2

4 May 1970

5975-00-826-4211
Electrical Conduit Union

008264211
UNF905: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-826-4210
Electrical Conduit Union

008264210
UNF605: RNCC: 3 | RNVC: 2
UNF200NR: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-826-4205
Electrical Conduit Elbow

008264205
EL59: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-825-9353
Electrical Equipment Mounting Base

008259353
MS91405B1C: RNCC: 2 | RNVC: 2
MIL-C-172: RNCC: 4 | RNVC: 1
940-10GB1C: RNCC: 5 | RNVC: 1
70-100313-1: RNCC: 5 | RNVC: 1
70-100313C: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-825-1031
Electrical Equipment Rack

008251031
10236250: RNCC: 3 | RNVC: 2

18 Aug 1967

5975-00-825-0362
Conduit Outlet

008250362
GUAC16: RNCC: 3 | RNVC: 2
GRC50: RNCC: 5 | RNVC: 9

23 Aug 1967

5975-00-824-5483
Junction Box

008245483
10941932: RNCC: 3 | RNVC: 2

16 Aug 1967

5975-00-824-4352
Cable End Sealing K

008244352
340-2H: RNCC: 3 | RNVC: 9

11 Aug 1967

5975-00-823-0978
Raceway Tee

008230978
2015: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-823-0979
Electrical Conduit Elbow

008230979
2011: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-823-0977
Raceway Coupling

008230977
2001: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-823-0944
Stuffing Tube

008230944
M24235-1-002SYMB0L2406: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1
M24235-1-002: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-823-0740
Electrical Cable Nipple

008230740
29: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-822-2889
Electrical Cable Nipple

008222889
5286201: RNCC: 3 | RNVC: 2
246: RNCC: 5 | RNVC: 1
246: RNCC: 5 | RNVC: 1
023094: RNCC: 5 | RNVC: 1
4757678: RNCC: 5 | RNVC: 2
23094: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-821-6630
Electrical Conduit Adapter

008216630
10-36974-123: RNCC: 3 | RNVC: 2
610452-12: RNCC: 5 | RNVC: 1
214MS007P002: RNCC: 5 | RNVC: 1
610452-12: RNCC: 5 | RNVC: 1
188183-1: RNCC: 5 | RNVC: 1
10-36974-123: RNCC: 5 | RNVC: 9
2091373-12: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-821-6446
Electrical Conduit Coupling Nut

008216446
MS25066-23: RNCC: 2 | RNVC: 2

1 Jan 1962

5975-00-821-5127
Sleeve

008215127
252-0144-000: RNCC: 3 | RNVC: 2
252-0144-000: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-821-5137
Spacer Assembly

008215137
LS7882-400: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-821-5129
Sleeve

008215129
252-0147-000: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-820-9144
Electrical Conduit Sealing Fitting

008209144
EYSF75AL: RNCC: 3 | RNVC: 2
EYS2SA: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-820-9139
Electrical Equipment Cabinet

008209139
R650337-5: RNCC: 3 | RNVC: 2
CY2907FPS: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-820-1581
Junction Box Extension

008201581
V5751: RNCC: 3 | RNVC: 2
5751-1: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-819-5531
Adapter

008195531
70537-1BC: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-818-9140
Rigid Metal Conduit Assembly

008189140
300-526049-21: RNCC: 3 | RNVC: 9

29 Mar 1968

5975-00-818-3819
Electrical Equipment Rack

008183819
546-7183-002: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-817-3445
Conduit Chase Nipple

008173445
DH2DP: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-817-3370
Electrical Box Connector

008173370
31-851: RNCC: 3 | RNVC: 2
31-85L: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-817-1781
Flexible Metal Conduit Assembly

008171781
90943-2: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-816-7915
Electrical Cable Nipple

008167915
92132: RNCC: 3 | RNVC: 2
92132: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-816-3681
Rack Corner Bracket

008163681
P401758: RNCC: 3 | RNVC: 2
P401758: RNCC: 3 | RNVC: 9
P401758: RNCC: 5 | RNVC: 9

31 Jan 1973

5975-00-816-3664
Cable Cap

008163664
1410: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-816-3665
Cable Cap

008163665
1415: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-816-1984
Conduit Outlet

008161984
A-A-50563-101ALLLK: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LL107: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
LL-400G: RNCC: 5 | RNVC: 9
70-404: RNCC: 5 | RNVC: 9
LL107: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-816-0266
Interconnecting Box

008160266
J1194GRC46: RNCC: 3 | RNVC: 2
01X202907: RNCC: 5 | RNVC: 2
SCDL374500: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-814-3282
Electrical Wall Plate

008143282
3046J: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-813-8650
Electrical Equipment Cabinet

008138650
A362410LP: RNCC: 3 | RNVC: 2

23 Apr 1972

5975-00-813-6801
Electrical Conduit Locknut

008136801
727907-1: RNCC: 3 | RNVC: 2
D91352: RNCC: C | RNVC: 1
22095: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-813-1968
Electrical-Electronic Equipment Chassis

008131968
101016-01: RNCC: 3 | RNVC: 9
5800332-1610-000: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-813-0723
Electrical Box Connector

008130723
ST75F: RNCC: 3 | RNVC: 2
LT143: RNCC: 5 | RNVC: 9
4Q-75FM: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-812-6913
Electrical Equipment Mounting Base

008126913
101M0001-11: RNCC: 3 | RNVC: 9
MT2373APN130: RNCC: 5 | RNVC: 1
101M0001-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-812-2429
Electrical Bonding Ring

008122429
666164-421: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-812-0642
Junction Box

008120642
9000S6202-74013-34: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-811-8235
Electrical Conduit Elbow

008118235
627046: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-810-8781
Electrical Cable Nipple

008108781
8140000069: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-810-8782
Electrical Equipment Cabinet

008108782
CU880HG: RNCC: 3 | RNVC: 2
CAB8: RNCC: 5 | RNVC: 1
CU-880MG: RNCC: 5 | RNVC: 9
MU757: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-810-6134
Conduit Outlet

008106134
GUAM14: RNCC: 3 | RNVC: 2
ST41D9-10: RNCC: 5 | RNVC: 9
GRLA-50: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-810-1185
Electrical Conduit Nipple

008101185
1-2X2-1-2: RNCC: 3 | RNVC: 9
795-417: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-807-4108
Coupling

008074108
3001: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-805-3860
Electrical-Electronic Equipment Chassis

008053860
564-8363-005: RNCC: 3 | RNVC: 9
564-8363-005: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-804-8783
Electrical Cable Nipple

008048783
8140000039: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-804-7875
Conduit Outlet

008047875
ERLB50: RNCC: 3 | RNVC: 2
0ELB1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-804-7874
Conduit Outlet

008047874
0ELR1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-803-8636
Electrical Conductor Bushing

008038636
18220-6: RNCC: 3 | RNVC: 2
18220-6: RNCC: 5 | RNVC: 2
7914643: RNCC: 5 | RNVC: 2
7914643: RNCC: 5 | RNVC: 9
1251-0352: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-803-2529
Electrical Box Connector

008032529
2267: RNCC: 3 | RNVC: 2
CGE192: RNCC: 3 | RNVC: 2
CGE192: RNCC: 5 | RNVC: 1
SR9-502: RNCC: 5 | RNVC: 9
9322005: RNCC: 7 | RNVC: 2
2267: RNCC: C | RNVC: 1

1 Jan 1960

5975-00-803-2127
Conduit Outlet

008032127
0ET1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-803-2126
Conduit Outlet

008032126
0ELL1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-803-1299
Electrical Conduit Adapter

008031299
1253: RNCC: 3 | RNVC: 2
327R: RNCC: 5 | RNVC: 9
630: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-803-0601
Electrical Conduit Sealing Fitting

008030601
VY22: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-802-8714
Electrical Equipment Mounting Base

008028714
MS91404S1: RNCC: 2 | RNVC: 2
MIL-C-172: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-802-6529
Electrical Entrance Elbow

008026529
V20LB: RNCC: 3 | RNVC: 2
0ELB2: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-802-6526
Electrical Conduit Union

008026526
UNY17: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-802-6525
Electrical Conduit Union

008026525
UNL205: RNCC: 3 | RNVC: 2
UNL75N: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-802-6205
Electrical Equipment Mounting Base

008026205
708644-801: RNCC: 3 | RNVC: 2
MT-2706/ARC-50(V): RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-802-4994
Conduit Outlet

008024994
GUAW24: RNCC: 3 | RNVC: 2
GRTA75: RNCC: 5 | RNVC: 2
ST41D9-16: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-802-4996
Conduit Outlet

008024996
AA50563-520GXXXA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
GRR1: RNCC: 5 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-802-1498
Blank Panel

008021498
544-1978-004: RNCC: 3 | RNVC: 9
544-1978-004: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-802-1497
Blank Panel

008021497
544-1982-004: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-801-9267
Amplifier Mount

008019267
1509594: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-801-0638
Electrical Cable Nipple

008010638
8010638: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-800-5975
Conduit Outlet

008005975
GUAX36: RNCC: 3 | RNVC: 2
WC586: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-800-5769
Electrical Conduit Coupling Nut

008005769
10482: RNCC: 3 | RNVC: 2
10482: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-800-3178
Electrical-Electronic Equipment Panel

008003178
449205-1: RNCC: 3 | RNVC: 2
449205-1: RNCC: 5 | RNVC: 2
449205-1: RNCC: 5 | RNVC: 9
FNA1534: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-799-2216
Electrical-Electronic Equipment Panel

007992216
117C634-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-799-2213
Panel Assembly

007992213
117C631-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-799-2214
Electrical-Electronic Equipment Panel

007992214
117C632-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-799-2070
Electrical-Electronic Equipment Panel

007992070
117C749-1: RNCC: 3 | RNVC: 2
106C7018-3: RNCC: 5 | RNVC: 1
FNA3151-1: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-798-8166
Conduit

007988166
868C858P1: RNCC: 3 | RNVC: 2
16305: RNCC: 5 | RNVC: 2
16305: RNCC: 5 | RNVC: 2
868C858P1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-797-8931
Final Assembly

007978931
A163: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-797-8925
Junction Box Assembly

007978925
67615: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-796-8394
Slide

007968394
29495-1: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-796-2886
Chassis Base

007962886
36958-37: RNCC: 3 | RNVC: 9
36958-37: RNCC: C | RNVC: 1

1 Jan 1960

5975-00-795-9368
Electrical Equipment Leg

007959368
549-6494-003: RNCC: 3 | RNVC: 2
549-6494-003: RNCC: 5 | RNVC: 2
549-6494-003: RNCC: 5 | RNVC: 2
549-6494-003: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-795-5046
Conduit

007955046
E4346-1: RNCC: 3 | RNVC: 2
1030668-1REVB: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-795-5043
Conduit

007955043
143462-B11680: RNCC: 3 | RNVC: 2
E4346-2: RNCC: 5 | RNVC: 9
1030668-2REVB: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-794-1612
Electrical-Electronic Equipment Panel

007941612
2085989-4: RNCC: 3 | RNVC: 2
265003-4: RNCC: 5 | RNVC: 2
265003-04: RNCC: 5 | RNVC: 2
265005-4: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-792-3462
Pole Band

007923462
6277: RNCC: 3 | RNVC: 2
1025: RNCC: 5 | RNVC: 9
7277: RNCC: 5 | RNVC: 9
7277: RNCC: 5 | RNVC: 9
6277: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-791-2835
Junction Box

007912835
369A4209-601: RNCC: 3 | RNVC: 9

15 Apr 1968

5975-00-790-9343
Junction Box

007909343
6490-60240-012: RNCC: 3 | RNVC: 2

8 Apr 1968

5975-00-790-4733
Electrical Conduit Adapter

007904733
9197288: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-789-3386
Electrical Conduit Locknut

007893386
GL75: RNCC: 3 | RNVC: 2
LG-402: RNCC: 5 | RNVC: 9
1243: RNCC: 5 | RNVC: 9
400-105M: RNCC: 5 | RNVC: 9
122: RNCC: 5 | RNVC: 9
102: RNCC: 5 | RNVC: 9
GL-75: RNCC: 5 | RNVC: 9
10601: RNCC: 5 | RNVC: 9
GL-12: RNCC: 5 | RNVC: 9

27 Mar 1968

5975-00-788-7225
Electrical Conduit Ferrule

007887225
STF75: RNCC: 3 | RNVC: 2
11501233-1: RNCC: 7 | RNVC: 2

1 Jan 1960

5975-00-788-6960
Mounting

007886960
MT-1948/U: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-788-5282
Interconnecting Box

007885282
SCDL496832: RNCC: 3 | RNVC: 2
J2564AKT18: RNCC: 5 | RNVC: 2
SMD496684: RNCC: 5 | RNVC: 2
201-44408: RNCC: 5 | RNVC: 2
201-44408: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-788-4737
Electrical Equipment Mounting Base

007884737
SCDL496829: RNCC: 3 | RNVC: 2
MT3448AKT18: RNCC: 5 | RNVC: 2
SMD496703: RNCC: 5 | RNVC: 2
201-44428: RNCC: 5 | RNVC: 2
201-44428: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-788-2130
Mold Heater Jaws

007882130
2078-276A: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-785-9288
Collar

007859288
737724: RNCC: 3 | RNVC: 2
737724: RNCC: 5 | RNVC: 2
737724: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-785-1154
Electrical Equipment Mounting Base

007851154
MT721AVQ2: RNCC: 3 | RNVC: 2
MT721AVQ2: RNCC: 3 | RNVC: 2
882-97: RNCC: 3 | RNVC: 2
A72501: RNCC: 3 | RNVC: 2
72501: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-784-7979
Cable Strain Relief Bushing

007847979
133094-01: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-783-7249
Electrical Equipment Mounting Base

007837249
101M2001-1: RNCC: 3 | RNVC: 9
MT2374APN130: RNCC: 5 | RNVC: 1
MT234APN130: RNCC: 5 | RNVC: 2
101M2001-11: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-782-4634
Electrical Equipment Rack

007824634
614R193G01: RNCC: 3 | RNVC: 2

21 Apr 1972

5975-00-782-1793
Junction Box Cover

007821793
11598606: RNCC: 3 | RNVC: 2
6975007821793: RNCC: 5 | RNVC: 9

5 Feb 1968

5975-00-782-0804
Conduit Chase Nipple

007820804
1950: RNCC: 3 | RNVC: 2
1110-1: RNCC: 5 | RNVC: 9
7-350-T: RNCC: 5 | RNVC: 9
1110-I: RNCC: 5 | RNVC: 9
959B: RNCC: 5 | RNVC: 9
1950: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-782-0403
Blank Panel

007820403
D21140BSIZEGTANALUM: RNCC: 3 | RNVC: 2
PWHA16 3-16TAN: RNCC: 5 | RNVC: 2
D21140BSIZEGTANALUM: RNCC: 5 | RNVC: 2
PWHA16: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-782-0282
Interconnecting Box

007820282
J2812ASM339V: RNCC: 3 | RNVC: 2
2587103: RNCC: 5 | RNVC: 2

17 Jan 1968

5975-00-780-5123
Electrical Cable Nipple

007805123
8Y10270: RNCC: 3 | RNVC: 2
8Y10270: RNCC: 3 | RNVC: 9
C608: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-780-4804
Strain Electrical Conductor Clamp

007804804
711698-93: RNCC: 3 | RNVC: 2
7C27-7AA: RNCC: 5 | RNVC: 2
7C27-7AA: RNCC: 5 | RNVC: 2

15 Mar 1968

5975-00-780-3945
Electrical Equipment Cabinet

007803945
FA6235: RNCC: 3 | RNVC: 2
215538: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-779-2748
Electrical Equipment Mounting Base

007792748
101-000-202: RNCC: 3 | RNVC: 2
6161: RNCC: 5 | RNVC: 2
MT811AU: RNCC: 5 | RNVC: 9
MT811U: RNCC: 5 | RNVC: 9
630609-505: RNCC: 5 | RNVC: 9
MI25173: RNCC: 5 | RNVC: 9
745-1: RNCC: 5 | RNVC: 9
630609-502: RNCC: 5 | RNVC: 9
M125173: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-779-1440
Electrical-Electronic Equipment Chassis

007791440
6209400: RNCC: 3 | RNVC: 2
6209400: RNCC: 5 | RNVC: 2
6209400: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-779-1404
Electrical-Electronic Equipment Chassis

007791404
6403300: RNCC: 3 | RNVC: 2
6403300: RNCC: 5 | RNVC: 2
6403300: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-778-6336
Blank Panel

007786336
D21140BSIZEFTANLLUM: RNCC: 3 | RNVC: 2
PWHA15 3-16TAN: RNCC: 5 | RNVC: 2
D21140BSIZEF: RNCC: C | RNVC: 1

1 Jan 1960

5975-00-778-6166
Strain Electrical Conductor Clamp

007786166
2C1-25M9: RNCC: 3 | RNVC: 9
9126650: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-778-5700
Electrical Raceway Cover

007785700
2000C: RNCC: 3 | RNVC: 1
200-542-01: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-778-4569
Coupling Sleeve

007784569
498361-401: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-777-8171
Insulating Generator Bushing

007778171
08P000273-0011: RNCC: 3 | RNVC: 2
608-300-1989560PC4: RNCC: 3 | RNVC: 2
08P000273-0011: RNCC: 5 | RNVC: 9
7-9E801684: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-777-5145
Electrical Conduit Elbow

007775145
FFL150: RNCC: 3 | RNVC: 2
FF-150: RNCC: 5 | RNVC: 2
FF150: RNCC: 5 | RNVC: 9
HL-1500: RNCC: 5 | RNVC: 9
824: RNCC: 5 | RNVC: 9

20 Mar 1968

5975-00-776-9835
Outri Forward Brace

007769835
9089282: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-776-9728
Receptacle Box

007769728
2144: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-776-4604
Electrical Cable Nipple

007764604
009126: RNCC: 3 | RNVC: 2
4594431-2: RNCC: 5 | RNVC: 2
4594431-2: RNCC: 7 | RNVC: 9

30 Jul 1969

5975-00-776-2718
Electrical Cable Nipple

007762718
132736: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-775-6432
Electrical Equipment Leg Section

007756432
9079436: RNCC: 3 | RNVC: 2
9079436: RNCC: 5 | RNVC: 9

23 Sep 1966

5975-00-775-6429
Electrical Equipment Leg Section

007756429
9079240: RNCC: 3 | RNVC: 2
9079240: RNCC: 5 | RNVC: 2
9079240: RNCC: 5 | RNVC: 2
9079240: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-775-0209
Conduit Clamp

007750209
PC-1: RNCC: 3 | RNVC: 2
9022298: RNCC: 5 | RNVC: 2
UPC-100G: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-773-3647
Blank Panel

007733647
64P215351: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-773-3646
Blank Panel

007733646
64X215653: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-773-2844
Electrical Conduit Adapter

007732844
7732844: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-772-7513
Conduit Outlet

007727513
LBH60: RNCC: 3 | RNVC: 2
ELB-200: RNCC: 5 | RNVC: 2
LBH60: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-772-2342
Electrical Conduit Elbow

007722342
60-40695-281: RNCC: 3 | RNVC: 2
7722342: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-771-5007
Electrical Equipment Mounting Base

007715007
50224-5001G1: RNCC: 3 | RNVC: 9
MT2249APA128: RNCC: 5 | RNVC: 2
50224-5001G1: RNCC: 5 | RNVC: 2
50224-5001: RNCC: 5 | RNVC: 2
50224-5001: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-769-9719
Electrical Cable Protector

007699719
6531 1-2: RNCC: 3 | RNVC: 9
7531 1-2: RNCC: 5 | RNVC: 9
792A: RNCC: 5 | RNVC: 9
7531 1-2: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-769-5564
Electrical Conduit Bondnut

007695564
3872: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-769-3671
Socket Eye

007693671
78721: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-769-3648
Crossarm Brace

007693648
7940: RNCC: 3 | RNVC: 9

1 Jan 1960

5975-00-768-7518
Insulator Pin

007687518
J607A: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-768-7465
Insulator Pin

007687465
881: RNCC: 3 | RNVC: 2
310041B1: RNCC: 5 | RNVC: 9
DP2S1: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-768-2971
Conduit Outlet Cover

007682971
970: RNCC: 3 | RNVC: 2
K350: RNCC: 5 | RNVC: 1
SC-69: RNCC: 5 | RNVC: 9
BS-350: RNCC: 5 | RNVC: 9
970: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-766-8490
Switch Terminal Cover

007668490
LA8566-11: RNCC: 3 | RNVC: 2
9018577: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-766-1828
Electrical Equipment Leg Section

007661828
549-6479-002: RNCC: 3 | RNVC: 2
A8101: RNCC: 5 | RNVC: 2
549-6479-002: RNCC: 5 | RNVC: 2
549-6479-002: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-766-1827
Electrical Equipment Leg Section

007661827
549-6478-002: RNCC: 3 | RNVC: 2
549-6478-002: RNCC: 5 | RNVC: 2
549-6478-002: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-764-9285
Stuffing Tube Adapter

007649285
M19622-9-001: RNCC: 2 | RNVC: 2
MIL-S-19622: RNCC: 4 | RNVC: 1
MILS19622-9: RNCC: 5 | RNVC: 9

8 Mar 1968

5975-00-764-7593
Electrical Equipment Mounting Base

007647593
10002E0002: RNCC: 3 | RNVC: 9
MT3538ARD17: RNCC: 5 | RNVC: 1

1 Jan 1960

5975-00-764-7592
Electrical Equipment Mounting Base

007647592
10001E0005: RNCC: 3 | RNVC: 9
MT3577ARD17: RNCC: 5 | RNVC: 1

1 Jan 1960

5975-00-764-6914
Blank Panel

007646914
D21140BSIZEATANALUM: RNCC: 3 | RNVC: 2
D21140BSIZEATANALUM: RNCC: 5 | RNVC: 2

15 Apr 1974

5975-00-764-6494
Ground Rod Section

007646494
11065232: RNCC: 3 | RNVC: 2
GRS583SPL: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-763-5364
Electrical Conduit Ferrule

007635364
119-55-4: RNCC: 3 | RNVC: 2

7 Oct 1972

5975-00-763-5086
Cable Collar

007635086
11053185-3: RNCC: 3 | RNVC: 2

17 Oct 1972

5975-00-762-8051
Ground Rod

007628051
RAA1190: RNCC: 3 | RNVC: 9

20 Feb 1970

5975-00-762-6824
Flexible Metal Conduit Assembly

007626824
1150-12A40TYPE2: RNCC: 3 | RNVC: 2

14 Apr 1972

5975-00-762-5814
Conduit Outlet Cover

007625814
DS23SA: RNCC: 3 | RNVC: 2

14 Apr 1972

5975-00-761-5602
Electrical-Electronic Equipment Chassis

007615602
6336588-1: RNCC: 3 | RNVC: 2

6 Mar 1970

5975-00-761-5233
Electrical Cable Nipple

007615233
7615233: RNCC: 3 | RNVC: 2
MIL003065: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-761-5112
Interconnecting Box

007615112
077-002-001: RNCC: 3 | RNVC: 2
077-002-001: RNCC: 5 | RNVC: 1
A51A9009-51: RNCC: 5 | RNVC: 9
077-002: RNCC: 5 | RNVC: 9
A51A9009-51: RNCC: 5 | RNVC: 9
A51A9009: RNCC: 5 | RNVC: 9
A51A9009: RNCC: 5 | RNVC: 9

7 Apr 1972

5975-00-761-2834
Clamp

007612834
C232: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-760-8214
Ground Rod

007608214
7608214: RNCC: 3 | RNVC: 2
BL721059: RNCC: 5 | RNVC: 9
BL721059: RNCC: 5 | RNVC: 9
BL721059: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-760-6340
Electrical Conduit Coupling

007606340
202C231-10: RNCC: 3 | RNVC: 2
202C231: RNCC: 5 | RNVC: 9
C2086-8-3: RNCC: 7 | RNVC: 2

31 Oct 1969

5975-00-760-5453
Stuffing Tube

007605453
M19622-6-006: RNCC: 2 | RNVC: 2
MILS19622-6: RNCC: 4 | RNVC: 1

7 Apr 1972

5975-00-760-0014
Conduit Outlet Cover

007600014
DS81: RNCC: 3 | RNVC: 2
7600014: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-759-0228
Chassis Holder Assy

007590228
401969-01: RNCC: 3 | RNVC: 2
6075126: RNCC: 5 | RNVC: 2
MBNY-128NA: RNCC: 5 | RNVC: 2
6075126: RNCC: 5 | RNVC: 2
600075P7: RNCC: 5 | RNVC: 2
A30-128: RNCC: 5 | RNVC: 9
6075126: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-758-6813
Electrical Equipment Mounting Base

007586813
522-3335-004: RNCC: 3 | RNVC: 2
MT3095ARC105: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-758-6386
Junction Box Cover

007586386
3K11362-111: RNCC: 3 | RNVC: 2

1 Jan 1960

5975-00-758-2109
Wire Strand Hanger

007582109
PA296X: RNCC: 3 | RNVC: 2
J2235: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-758-1073
Bushing Crystal

007581073
C200039472: RNCC: 3 | RNVC: 9
C200039472: RNCC: 5 | RNVC: 2

9 Jul 1971

5975-00-758-1060
Electrical Cable Nipple

007581060
904743-4: RNCC: 3 | RNVC: 2
234A111-3-00: RNCC: 5 | RNVC: 9

24 Jul 1971

5975-00-757-6894
Junction Box Cover

007576894
6861961: RNCC: 3 | RNVC: 2
6861961: RNCC: 5 | RNVC: 2
EU80657: RNCC: 5 | RNVC: 2

28 Feb 1968

5975-00-756-8311
Cable Spacer

007568311
69099: RNCC: 3 | RNVC: 2
69099: RNCC: 3 | RNVC: 9
69099: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-755-3328
Blank Panel

007553328
R2124PANEL3: RNCC: 3 | RNVC: 2
66773J: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-754-5299
Electrical Equipment Mounting Base

007545299
B1003-476: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-754-4142
Power Suppl Housing

007544142
9991489: RNCC: 3 | RNVC: 2

4 Dec 1967

5975-00-753-9409
Mounting Plate

007539409
845615: RNCC: 3 | RNVC: 2
845615: RNCC: 5 | RNVC: 9
845615: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-753-6864
Electrical-Electronic Equipment Chassis

007536864
173260: RNCC: 3 | RNVC: 2
173260: RNCC: 5 | RNVC: 9
173260: RNCC: C | RNVC: 1

1 Jan 1960

5975-00-740-8367
Electrical-Electronic Equipment Chassis

007408367
505-4408-005: RNCC: 3 | RNVC: 9
505-4408-005: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-738-9066
Wye Assembly

007389066
38543: RNCC: 3 | RNVC: 2
38543: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-738-6055
Ground Rod Section

007386055
10109239: RNCC: 3 | RNVC: 2
10109239: RNCC: 5 | RNVC: 2
10109239: RNCC: 5 | RNVC: 2
10109239: RNCC: 5 | RNVC: 2
10109239: RNCC: 5 | RNVC: 2
10109239: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-738-5466
Blank Panel

007385466
558670-1: RNCC: 3 | RNVC: 9
558670-1: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-738-4902
Cap

007384902
2064549G4: RNCC: 3 | RNVC: 2
2064549G4: RNCC: 5 | RNVC: 2

1 Jan 1961

5975-00-738-4903
Cap

007384903
2064549G3: RNCC: 3 | RNVC: 2
2064549G3: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-737-7684
Electrical Conductor Bushing

007377684
9868-105X6R1-16: RNCC: 3 | RNVC: 2
9868-105X6-16: RNCC: 5 | RNVC: 9
598-125-1892309PC16: RNCC: 5 | RNVC: 9
125-2068645: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-736-3420
Electrical-Electronic Equipment Panel

007363420
106C8010-4: RNCC: 3 | RNVC: 2
FNA3152-2: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-732-6679
Electrical Box Connector

007326679
CGBS3016: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-732-1289
Electrical Conduit Elbow

007321289
7321289: RNCC: 3 | RNVC: 2
5293255: RNCC: 5 | RNVC: 2
5293255: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-730-3164
Mounting

007303164
57A14D121: RNCC: 3 | RNVC: 2
MT-1530/ARN-21A: RNCC: 5 | RNVC: 2
57A14D121: RNCC: 5 | RNVC: 2
57A14D121: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-729-8734
Electrical Cable Nipple

007298734
SI-2401-1: RNCC: 3 | RNVC: 2
SI2401-1: RNCC: 5 | RNVC: 9
S12401-1: RNCC: 5 | RNVC: 9
5975PL1309779: RNCC: 6 | RNVC: 9
SI2401: RNCC: E | RNVC: 8
124-2: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-729-8608
Cable Spacer

007298608
9028431: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-729-8617
Electrical Box Connector

007298617
340-6160802-25: RNCC: 3 | RNVC: 9
340-6160802-25: RNCC: 5 | RNVC: 9
340-6160802-25: RNCC: 5 | RNVC: 9
340-6160802-25: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-729-8134
Electrical Cable Nipple

007298134
3615-1: RNCC: 3 | RNVC: 9
21018: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-729-1651
Electrical Conduit Ferrule

007291651
6816268-8: RNCC: 3 | RNVC: 2
6816268-8: RNCC: 5 | RNVC: 2
6816268-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-729-1014
Electrical Equipment Cabinet

007291014
G571948: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-727-6098
Electrical Cable Nipple

007276098
13RED: RNCC: 3 | RNVC: 2
28F488: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-727-3678
Electrical Conduit Sealing Fitting

007273678
EZS36: RNCC: 3 | RNVC: 2
ESUM100: RNCC: 5 | RNVC: 2
VA32: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-727-0223
Electrical Conduit Elbow

007270223
EL3: RNCC: 3 | RNVC: 2
ELF-45-100: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-726-8369
Conduit Outlet

007268369
ARE23: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-726-3565
Electrical Equipment Rack

007263565
FR27A: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-726-0140
Junction Box

007260140
Z64-96A-20: RNCC: 3 | RNVC: 2
Z64-96-20: RNCC: 5 | RNVC: 9

21 Feb 1968

5975-00-719-9586
Shockmount Assembly

007199586
522-2031-004: RNCC: 3 | RNVC: 2
MT2141ARC: RNCC: 5 | RNVC: 9
MT2141ARC: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-719-6217
Electrical Equipment Mounting Base

007196217
700R353G01: RNCC: 3 | RNVC: 2
MT2131APQ72: RNCC: 5 | RNVC: 1
700R353G01: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-719-5414
Electrical Components Tie Down Strap

007195414
516-2383-002: RNCC: 3 | RNVC: 9

9 Feb 1968

5975-00-719-5412
Electrical Components Tie Down Strap

007195412
516-2662-002: RNCC: 3 | RNVC: 9

9 Feb 1968

5975-00-719-4942
Electrical Components Tie Down Strap

007194942
516-2342-002: RNCC: 3 | RNVC: 9

9 Feb 1968

5975-00-718-4882
Electrical Box Connector

007184882
4234: RNCC: 3 | RNVC: 2
8150W: RNCC: 5 | RNVC: 9

16 Feb 1968

5975-00-717-7280
Electrical Conduit Ferrule

007177280
23262: RNCC: 3 | RNVC: 2
23262: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-717-5564
Electrical Equipment Foot

007175564
11073454: RNCC: 3 | RNVC: 2
11073454: RNCC: 5 | RNVC: 2

9 Feb 1968

5975-00-717-3165
Electrical Equipment Mounting Base

007173165
90101-1: RNCC: 3 | RNVC: 2
MT2203AQS10: RNCC: 5 | RNVC: 2
90101-1B: RNCC: 5 | RNVC: 2
1046721: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-717-3119
Boot

007173119
737038: RNCC: 3 | RNVC: 2
404M62-1: RNCC: 5 | RNVC: 9
737038: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-714-2892
Stuffing Tube

007142892
7142892: RNCC: 3 | RNVC: 2

21 Sep 1985

5975-00-714-1381
Nonmetallic Conduit

007141381
7445343-322: RNCC: 3 | RNVC: 2

2 Jul 1971

5975-00-714-1142
Thimble Adapter

007141142
J4023: RNCC: 3 | RNVC: 2

2 Jul 1971

5975-00-713-8182
Strain Electrical Conductor Clamp

007138182
33-52: RNCC: 3 | RNVC: 2
8110107-7: RNCC: 5 | RNVC: 2
8110107-7: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-713-3822
Box

007133822
599031009: RNCC: 3 | RNVC: 2
47352: RNCC: 5 | RNVC: 2
599031009: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-711-4335
Electrical Equipment Mounting Base

007114335
751059: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-710-1902
Rim Clinching Clamp

007101902
NLA-1532: RNCC: 3 | RNVC: 2
NLA-1532: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-709-2718
Du Universal Hanger

007092718
LD4H: RNCC: 3 | RNVC: 2
LD4H: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-709-2716
Electrical Conduit Coupling Nut

007092716
12612: RNCC: 3 | RNVC: 2
12612: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-709-1758
Electrical Conduit Elbow

007091758
23036: RNCC: 3 | RNVC: 2
23036: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-707-8036
Electrical Cable Nipple

007078036
069505: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-706-7006
Cable Hanger

007067006
119C124: RNCC: 3 | RNVC: 2
15056: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-706-2934
Mounting Base

007062934
622301: RNCC: 3 | RNVC: 2
622301: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-706-0685
Cable Clamp

007060685
88039: RNCC: 3 | RNVC: 2
88039: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-705-9535
Road Conduit

007059535
MCD4123: RNCC: 3 | RNVC: 2
2378-4: RNCC: 5 | RNVC: 9
MCD4123: RNCC: 5 | RNVC: 9
SK106-1367: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-705-7667
Electrical Equipment Leg

007057667
151553: RNCC: 3 | RNVC: 2
151553: RNCC: 3 | RNVC: 9
151553: RNCC: 5 | RNVC: 2
151553: RNCC: 5 | RNVC: 9
151553: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-705-7569
Electrical Conduit Elbow

007057569
7057569: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-705-6644
Electrical Conduit Coupling Nut

007056644
7056644: RNCC: 3 | RNVC: 2
5975007056644: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-705-4845
Electrical Bonding Ring

007054845
411-095: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-705-2061
Electrical-Electronic Equipment Chassis

007052061
522-1625-003: RNCC: 3 | RNVC: 2
522-1625-003: RNCC: 3 | RNVC: 9
CY-2598/ARN-58: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-704-0334
Hook

007040334
59A5A44-1: RNCC: 3 | RNVC: 2
12-343-00-001: RNCC: 5 | RNVC: 9
6000040P1: RNCC: 5 | RNVC: 9
108761-3: RNCC: 5 | RNVC: 9
564321-1: RNCC: 5 | RNVC: 9
564321-1: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-703-4397
Cable Clamp

007034397
H5478755PC101: RNCC: 3 | RNVC: 1

1 Jan 1963

5975-00-702-8253
Electrical-Electronic Equipment Chassis

007028253
6815818: RNCC: 3 | RNVC: 2
6815818: RNCC: 5 | RNVC: 1
6815818: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-702-5287
Junction Box

007025287
5739: RNCC: 3 | RNVC: 2

16 Jun 1972

5975-00-702-4062
Junction Box Cover

007024062
5744S: RNCC: 3 | RNVC: 2
5744S1GANG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-701-8061
Stuffing Tube Adapter

007018061
9054127: RNCC: 3 | RNVC: 2
9054127: RNCC: 5 | RNVC: 2
9054127: RNCC: 5 | RNVC: 2
9054127: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-701-6883
Electrical-Electronic Equipment Chassis

007016883
158521: RNCC: 3 | RNVC: 2
158521: RNCC: 3 | RNVC: 9
158521: RNCC: 5 | RNVC: 2
158521: RNCC: 5 | RNVC: 9
158521: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-701-6334
Interconnecting Box

007016334
SM-D-187789: RNCC: 3 | RNVC: 2
59804: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-701-5263
Cable Clamp

007015263
7C1-14: RNCC: 3 | RNVC: 2
7C1-14: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-701-5264
Cable Clamp

007015264
7C1-18: RNCC: 3 | RNVC: 2
9986516-2: RNCC: 3 | RNVC: 2
7C1-18: RNCC: 5 | RNVC: 1
711698-008: RNCC: 5 | RNVC: 2
11745636: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-701-0955
Wireway Cover

007010955
KFW442: RNCC: 3 | RNVC: 9

2 Feb 1968

5975-00-701-0990
Electrical Equipment Cabinet

007010990
CU-728BT: RNCC: 3 | RNVC: 2
C1794: RNCC: 3 | RNVC: 9

2 Feb 1968

5975-00-701-0515
U Connector

007010515
KFUC220: RNCC: 3 | RNVC: 9

2 Feb 1968

5975-00-701-0410
Closing Plate

007010410
KFCP220: RNCC: 3 | RNVC: 9

2 Feb 1968

5975-00-701-0411
Closing Plate

007010411
KFCP440: RNCC: 3 | RNVC: 9

2 Feb 1968

5975-00-700-8215
Junction Cover Assy

007008215
121AVP10047-1: RNCC: 3 | RNVC: 2
121AVP10047-3: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-700-7491
Switch Terminal Cover

007007491
7910306: RNCC: 3 | RNVC: 9
7910306: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-700-6764
Flexible Metal Conduit Assembly

007006764
403847-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-700-4517
Electrical Equipment Cabinet

007004517
19150: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-698-9853
Electrical Equipment Mounting Base

006989853
18785-3: RNCC: 3 | RNVC: 2
MT-1544/ALT-8: RNCC: 5 | RNVC: 2
MT-1544/ALT-8: RNCC: 5 | RNVC: 2
MT-1544/ALT-8: RNCC: 5 | RNVC: 2
MT-1544/ALT-8: RNCC: 5 | RNVC: 2
MT-1544/ALT-8: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-698-5791
Electrical Box Connector

006985791
847256: RNCC: 3 | RNVC: 2
DB938: RNCC: 5 | RNVC: 2
8204326: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-698-4148
Cable Collar

006984148
RA4712-3CC: RNCC: 3 | RNVC: 2
RA4712-3CC: RNCC: 5 | RNVC: 9
RA4712-3CC: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-698-1866
Bushing

006981866
187-13CHANGEA: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-698-0425
Electrical Cable Protector

006980425
SM-B-169030: RNCC: 3 | RNVC: 2
B23179: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-697-7860
Electrical Conduit Coupling Nut

006977860
5293619: RNCC: 3 | RNVC: 2
5293619: RNCC: 3 | RNVC: 2
10-40459-22: RNCC: 3 | RNVC: 2
7716633: RNCC: 5 | RNVC: 2
7716633: RNCC: 5 | RNVC: 2
EC3061: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-695-4793
Shoe Assembly Pole

006954793
221-0091: RNCC: 3 | RNVC: 2
8409751: RNCC: 5 | RNVC: 2
221A91: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-693-5922
Terminal Strip Bracket

006935922
R0Z10001767: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-690-9061
Stuffing Tube Packing Nut

006909061
30866: RNCC: 3 | RNVC: 2
30866: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-690-8939
Electrical-Electronic Equipment Chassis

006908939
1180039-001: RNCC: 3 | RNVC: 2
1180039-001: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-690-4509
Electrical-Electronic Equipment Chassis

006904509
3136697: RNCC: 3 | RNVC: 2
3136697: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-690-2973
Flexible Metal Conduit Assembly

006902973
ECLK212: RNCC: 3 | RNVC: 2
ECLK-75-12: RNCC: 5 | RNVC: 9
ECK212: RNCC: 5 | RNVC: 9

1 Jan 1961

Load More Results